drivers/spi/spi-atmel.c

   1 /*
   2  * Driver for Atmel AT32 and AT91 SPI Controllers
   3  *
   4  * Copyright (C) 2006 Atmel Corporation
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/init.h>
  13 #include <linux/clk.h>
  14 #include <linux/module.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/delay.h>
  17 #include <linux/dma-mapping.h>
  18 #include <linux/dmaengine.h>
  19 #include <linux/err.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/spi/spi.h>
  22 #include <linux/slab.h>
  23 #include <linux/platform_data/atmel.h>
  24 #include <linux/platform_data/dma-atmel.h>
  25 #include <linux/of.h>
  26
  27 #include <linux/io.h>
  28 #include <linux/gpio.h>
  29
  30 /* SPI register offsets */
  31 #define SPI_CR                                  0x0000
  32 #define SPI_MR                                  0x0004
  33 #define SPI_RDR                                 0x0008
  34 #define SPI_TDR                                 0x000c
  35 #define SPI_SR                                  0x0010
  36 #define SPI_IER                                 0x0014
  37 #define SPI_IDR                                 0x0018
  38 #define SPI_IMR                                 0x001c
  39 #define SPI_CSR0                                0x0030
  40 #define SPI_CSR1                                0x0034
  41 #define SPI_CSR2                                0x0038
  42 #define SPI_CSR3                                0x003c
  43 #define SPI_VERSION                             0x00fc
  44 #define SPI_RPR                                 0x0100
  45 #define SPI_RCR                                 0x0104
  46 #define SPI_TPR                                 0x0108
  47 #define SPI_TCR                                 0x010c
  48 #define SPI_RNPR                                0x0110
  49 #define SPI_RNCR                                0x0114
  50 #define SPI_TNPR                                0x0118
  51 #define SPI_TNCR                                0x011c
  52 #define SPI_PTCR                                0x0120
  53 #define SPI_PTSR                                0x0124
  54
  55 /* Bitfields in CR */
  56 #define SPI_SPIEN_OFFSET                        0
  57 #define SPI_SPIEN_SIZE                          1
  58 #define SPI_SPIDIS_OFFSET                       1
  59 #define SPI_SPIDIS_SIZE                         1
  60 #define SPI_SWRST_OFFSET                        7
  61 #define SPI_SWRST_SIZE                          1
  62 #define SPI_LASTXFER_OFFSET                     24
  63 #define SPI_LASTXFER_SIZE                       1
  64
  65 /* Bitfields in MR */
  66 #define SPI_MSTR_OFFSET                         0
  67 #define SPI_MSTR_SIZE                           1
  68 #define SPI_PS_OFFSET                           1
  69 #define SPI_PS_SIZE                             1
  70 #define SPI_PCSDEC_OFFSET                       2
  71 #define SPI_PCSDEC_SIZE                         1
  72 #define SPI_FDIV_OFFSET                         3
  73 #define SPI_FDIV_SIZE                           1
  74 #define SPI_MODFDIS_OFFSET                      4
  75 #define SPI_MODFDIS_SIZE                        1
  76 #define SPI_WDRBT_OFFSET                        5
  77 #define SPI_WDRBT_SIZE                          1
  78 #define SPI_LLB_OFFSET                          7
  79 #define SPI_LLB_SIZE                            1
  80 #define SPI_PCS_OFFSET                          16
  81 #define SPI_PCS_SIZE                            4
  82 #define SPI_DLYBCS_OFFSET                       24
  83 #define SPI_DLYBCS_SIZE                         8
  84
  85 /* Bitfields in RDR */
  86 #define SPI_RD_OFFSET                           0
  87 #define SPI_RD_SIZE                             16
  88
  89 /* Bitfields in TDR */
  90 #define SPI_TD_OFFSET                           0
  91 #define SPI_TD_SIZE                             16
  92
  93 /* Bitfields in SR */
  94 #define SPI_RDRF_OFFSET                         0
  95 #define SPI_RDRF_SIZE                           1
  96 #define SPI_TDRE_OFFSET                         1
  97 #define SPI_TDRE_SIZE                           1
  98 #define SPI_MODF_OFFSET                         2
  99 #define SPI_MODF_SIZE                           1
 100 #define SPI_OVRES_OFFSET                        3
 101 #define SPI_OVRES_SIZE                          1
 102 #define SPI_ENDRX_OFFSET                        4
 103 #define SPI_ENDRX_SIZE                          1
 104 #define SPI_ENDTX_OFFSET                        5
 105 #define SPI_ENDTX_SIZE                          1
 106 #define SPI_RXBUFF_OFFSET                       6
 107 #define SPI_RXBUFF_SIZE                         1
 108 #define SPI_TXBUFE_OFFSET                       7
 109 #define SPI_TXBUFE_SIZE                         1
 110 #define SPI_NSSR_OFFSET                         8
 111 #define SPI_NSSR_SIZE                           1
 112 #define SPI_TXEMPTY_OFFSET                      9
 113 #define SPI_TXEMPTY_SIZE                        1
 114 #define SPI_SPIENS_OFFSET                       16
 115 #define SPI_SPIENS_SIZE                         1
 116
 117 /* Bitfields in CSR0 */
 118 #define SPI_CPOL_OFFSET                         0
 119 #define SPI_CPOL_SIZE                           1
 120 #define SPI_NCPHA_OFFSET                        1
 121 #define SPI_NCPHA_SIZE                          1
 122 #define SPI_CSAAT_OFFSET                        3
 123 #define SPI_CSAAT_SIZE                          1
 124 #define SPI_BITS_OFFSET                         4
 125 #define SPI_BITS_SIZE                           4
 126 #define SPI_SCBR_OFFSET                         8
 127 #define SPI_SCBR_SIZE                           8
 128 #define SPI_DLYBS_OFFSET                        16
 129 #define SPI_DLYBS_SIZE                          8
 130 #define SPI_DLYBCT_OFFSET                       24
 131 #define SPI_DLYBCT_SIZE                         8
 132
 133 /* Bitfields in RCR */
 134 #define SPI_RXCTR_OFFSET                        0
 135 #define SPI_RXCTR_SIZE                          16
 136
 137 /* Bitfields in TCR */
 138 #define SPI_TXCTR_OFFSET                        0
 139 #define SPI_TXCTR_SIZE                          16
 140
 141 /* Bitfields in RNCR */
 142 #define SPI_RXNCR_OFFSET                        0
 143 #define SPI_RXNCR_SIZE                          16
 144
 145 /* Bitfields in TNCR */
 146 #define SPI_TXNCR_OFFSET                        0
 147 #define SPI_TXNCR_SIZE                          16
 148
 149 /* Bitfields in PTCR */
 150 #define SPI_RXTEN_OFFSET                        0
 151 #define SPI_RXTEN_SIZE                          1
 152 #define SPI_RXTDIS_OFFSET                       1
 153 #define SPI_RXTDIS_SIZE                         1
 154 #define SPI_TXTEN_OFFSET                        8
 155 #define SPI_TXTEN_SIZE                          1
 156 #define SPI_TXTDIS_OFFSET                       9
 157 #define SPI_TXTDIS_SIZE                         1
 158
 159 /* Constants for BITS */
 160 #define SPI_BITS_8_BPT                          0
 161 #define SPI_BITS_9_BPT                          1
 162 #define SPI_BITS_10_BPT                         2
 163 #define SPI_BITS_11_BPT                         3
 164 #define SPI_BITS_12_BPT                         4
 165 #define SPI_BITS_13_BPT                         5
 166 #define SPI_BITS_14_BPT                         6
 167 #define SPI_BITS_15_BPT                         7
 168 #define SPI_BITS_16_BPT                         8
 169
 170 /* Bit manipulation macros */
 171 #define SPI_BIT(name) \
 172         (1 << SPI_##name##_OFFSET)
 173 #define SPI_BF(name,value) \
 174         (((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET)
 175 #define SPI_BFEXT(name,value) \
 176         (((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1))
 177 #define SPI_BFINS(name,value,old) \
 178         ( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
 179           | SPI_BF(name,value))
 180
 181 /* Register access macros */
 182 #define spi_readl(port,reg) \
 183         __raw_readl((port)->regs + SPI_##reg)
 184 #define spi_writel(port,reg,value) \
 185         __raw_writel((value), (port)->regs + SPI_##reg)
 186
 187 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
 188  * cache operations; better heuristics consider wordsize and bitrate.
 189  */
 190 #define DMA_MIN_BYTES   16
 191
 192 struct atmel_spi_dma {
 193         struct dma_chan                 *chan_rx;
 194         struct dma_chan                 *chan_tx;
 195         struct scatterlist              sgrx;
 196         struct scatterlist              sgtx;
 197         struct dma_async_tx_descriptor  *data_desc_rx;
 198         struct dma_async_tx_descriptor  *data_desc_tx;
 199
 200         struct at_dma_slave     dma_slave;
 201 };
 202
 203 struct atmel_spi_caps {
 204         bool    is_spi2;
 205         bool    has_wdrbt;
 206         bool    has_dma_support;
 207 };
 208
 209 /*
 210  * The core SPI transfer engine just talks to a register bank to set up
 211  * DMA transfers; transfer queue progress is driven by IRQs.  The clock
 212  * framework provides the base clock, subdivided for each spi_device.
 213  */
 214 struct atmel_spi {
 215         spinlock_t              lock;
 216         unsigned long           flags;
 217
 218         phys_addr_t             phybase;
 219         void __iomem            *regs;
 220         int                     irq;
 221         struct clk              *clk;
 222         struct platform_device  *pdev;
 223         struct spi_device       *stay;
 224
 225         u8                      stopping;
 226         struct list_head        queue;
 227         struct tasklet_struct   tasklet;
 228         struct spi_transfer     *current_transfer;
 229         unsigned long           current_remaining_bytes;
 230         struct spi_transfer     *next_transfer;
 231         unsigned long           next_remaining_bytes;
 232         int                     done_status;
 233
 234         /* scratch buffer */
 235         void                    *buffer;
 236         dma_addr_t              buffer_dma;
 237
 238         struct atmel_spi_caps   caps;
 239
 240         bool                    use_dma;
 241         bool                    use_pdc;
 242         /* dmaengine data */
 243         struct atmel_spi_dma    dma;
 244 };
 245
 246 /* Controller-specific per-slave state */
 247 struct atmel_spi_device {
 248         unsigned int            npcs_pin;
 249         u32                     csr;
 250 };
 251
 252 #define BUFFER_SIZE             PAGE_SIZE
 253 #define INVALID_DMA_ADDRESS     0xffffffff
 254
 255 /*
 256  * Version 2 of the SPI controller has
 257  *  - CR.LASTXFER
 258  *  - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
 259  *  - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
 260  *  - SPI_CSRx.CSAAT
 261  *  - SPI_CSRx.SBCR allows faster clocking
 262  */
 263 static bool atmel_spi_is_v2(struct atmel_spi *as)
 264 {
 265         return as->caps.is_spi2;
 266 }
 267
 268 /*
 269  * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
 270  * they assume that spi slave device state will not change on deselect, so
 271  * that automagic deselection is OK.  ("NPCSx rises if no data is to be
 272  * transmitted")  Not so!  Workaround uses nCSx pins as GPIOs; or newer
 273  * controllers have CSAAT and friends.
 274  *
 275  * Since the CSAAT functionality is a bit weird on newer controllers as
 276  * well, we use GPIO to control nCSx pins on all controllers, updating
 277  * MR.PCS to avoid confusing the controller.  Using GPIOs also lets us
 278  * support active-high chipselects despite the controller's belief that
 279  * only active-low devices/systems exists.
 280  *
 281  * However, at91rm9200 has a second erratum whereby nCS0 doesn't work
 282  * right when driven with GPIO.  ("Mode Fault does not allow more than one
 283  * Master on Chip Select 0.")  No workaround exists for that ... so for
 284  * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
 285  * and (c) will trigger that first erratum in some cases.
 286  */
 287
 288 static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
 289 {
 290         struct atmel_spi_device *asd = spi->controller_state;
 291         unsigned active = spi->mode & SPI_CS_HIGH;
 292         u32 mr;
 293
 294         if (atmel_spi_is_v2(as)) {
 295                 spi_writel(as, CSR0 + 4 * spi->chip_select, asd->csr);
 296                 /* For the low SPI version, there is a issue that PDC transfer
 297                  * on CS1,2,3 needs SPI_CSR0.BITS config as SPI_CSR1,2,3.BITS
 298                  */
 299                 spi_writel(as, CSR0, asd->csr);
 300                 if (as->caps.has_wdrbt) {
 301                         spi_writel(as, MR,
 302                                         SPI_BF(PCS, ~(0x01 << spi->chip_select))
 303                                         | SPI_BIT(WDRBT)
 304                                         | SPI_BIT(MODFDIS)
 305                                         | SPI_BIT(MSTR));
 306                 } else {
 307                         spi_writel(as, MR,
 308                                         SPI_BF(PCS, ~(0x01 << spi->chip_select))
 309                                         | SPI_BIT(MODFDIS)
 310                                         | SPI_BIT(MSTR));
 311                 }
 312
 313                 mr = spi_readl(as, MR);
 314                 gpio_set_value(asd->npcs_pin, active);
 315         } else {
 316                 u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
 317                 int i;
 318                 u32 csr;
 319
 320                 /* Make sure clock polarity is correct */
 321                 for (i = 0; i < spi->master->num_chipselect; i++) {
 322                         csr = spi_readl(as, CSR0 + 4 * i);
 323                         if ((csr ^ cpol) & SPI_BIT(CPOL))
 324                                 spi_writel(as, CSR0 + 4 * i,
 325                                                 csr ^ SPI_BIT(CPOL));
 326                 }
 327
 328                 mr = spi_readl(as, MR);
 329                 mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
 330                 if (spi->chip_select != 0)
 331                         gpio_set_value(asd->npcs_pin, active);
 332                 spi_writel(as, MR, mr);
 333         }
 334
 335         dev_dbg(&spi->dev, "activate %u%s, mr %08x\n",
 336                         asd->npcs_pin, active ? " (high)" : "",
 337                         mr);
 338 }
 339
 340 static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
 341 {
 342         struct atmel_spi_device *asd = spi->controller_state;
 343         unsigned active = spi->mode & SPI_CS_HIGH;
 344         u32 mr;
 345
 346         /* only deactivate *this* device; sometimes transfers to
 347          * another device may be active when this routine is called.
 348          */
 349         mr = spi_readl(as, MR);
 350         if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) {
 351                 mr = SPI_BFINS(PCS, 0xf, mr);
 352                 spi_writel(as, MR, mr);
 353         }
 354
 355         dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n",
 356                         asd->npcs_pin, active ? " (low)" : "",
 357                         mr);
 358
 359         if (atmel_spi_is_v2(as) || spi->chip_select != 0)
 360                 gpio_set_value(asd->npcs_pin, !active);
 361 }
 362
 363 static void atmel_spi_lock(struct atmel_spi *as) __acquires(&as->lock)
 364 {
 365         spin_lock_irqsave(&as->lock, as->flags);
 366 }
 367
 368 static void atmel_spi_unlock(struct atmel_spi *as) __releases(&as->lock)
 369 {
 370         spin_unlock_irqrestore(&as->lock, as->flags);
 371 }
 372
 373 static inline bool atmel_spi_use_dma(struct atmel_spi *as,
 374                                 struct spi_transfer *xfer)
 375 {
 376         return as->use_dma && xfer->len >= DMA_MIN_BYTES;
 377 }
 378
 379 static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
 380                                         struct spi_transfer *xfer)
 381 {
 382         return msg->transfers.prev == &xfer->transfer_list;
 383 }
 384
 385 static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
 386 {
 387         return xfer->delay_usecs == 0 && !xfer->cs_change;
 388 }
 389
 390 static int atmel_spi_dma_slave_config(struct atmel_spi *as,
 391                                 struct dma_slave_config *slave_config,
 392                                 u8 bits_per_word)
 393 {
 394         int err = 0;
 395
 396         if (bits_per_word > 8) {
 397                 slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 398                 slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 399         } else {
 400                 slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 401                 slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 402         }
 403
 404         slave_config->dst_addr = (dma_addr_t)as->phybase + SPI_TDR;
 405         slave_config->src_addr = (dma_addr_t)as->phybase + SPI_RDR;
 406         slave_config->src_maxburst = 1;
 407         slave_config->dst_maxburst = 1;
 408         slave_config->device_fc = false;
 409
 410         slave_config->direction = DMA_MEM_TO_DEV;
 411         if (dmaengine_slave_config(as->dma.chan_tx, slave_config)) {
 412                 dev_err(&as->pdev->dev,
 413                         "failed to configure tx dma channel\n");
 414                 err = -EINVAL;
 415         }
 416
 417         slave_config->direction = DMA_DEV_TO_MEM;
 418         if (dmaengine_slave_config(as->dma.chan_rx, slave_config)) {
 419                 dev_err(&as->pdev->dev,
 420                         "failed to configure rx dma channel\n");
 421                 err = -EINVAL;
 422         }
 423
 424         return err;
 425 }
 426
 427 static bool filter(struct dma_chan *chan, void *pdata)
 428 {
 429         struct atmel_spi_dma *sl_pdata = pdata;
 430         struct at_dma_slave *sl;
 431
 432         if (!sl_pdata)
 433                 return false;
 434
 435         sl = &sl_pdata->dma_slave;
 436         if (sl->dma_dev == chan->device->dev) {
 437                 chan->private = sl;
 438                 return true;
 439         } else {
 440                 return false;
 441         }
 442 }
 443
 444 static int atmel_spi_configure_dma(struct atmel_spi *as)
 445 {
 446         struct dma_slave_config slave_config;
 447         struct device *dev = &as->pdev->dev;
 448         int err;
 449
 450         dma_cap_mask_t mask;
 451         dma_cap_zero(mask);
 452         dma_cap_set(DMA_SLAVE, mask);
 453
 454         as->dma.chan_tx = dma_request_slave_channel_compat(mask, filter,
 455                                                            &as->dma,
 456                                                            dev, "tx");
 457         if (!as->dma.chan_tx) {
 458                 dev_err(dev,
 459                         "DMA TX channel not available, SPI unable to use DMA\n");
 460                 err = -EBUSY;
 461                 goto error;
 462         }
 463
 464         as->dma.chan_rx = dma_request_slave_channel_compat(mask, filter,
 465                                                            &as->dma,
 466                                                            dev, "rx");
 467
 468         if (!as->dma.chan_rx) {
 469                 dev_err(dev,
 470                         "DMA RX channel not available, SPI unable to use DMA\n");
 471                 err = -EBUSY;
 472                 goto error;
 473         }
 474
 475         err = atmel_spi_dma_slave_config(as, &slave_config, 8);
 476         if (err)
 477                 goto error;
 478
 479         dev_info(&as->pdev->dev,
 480                         "Using %s (tx) and %s (rx) for DMA transfers\n",
 481                         dma_chan_name(as->dma.chan_tx),
 482                         dma_chan_name(as->dma.chan_rx));
 483         return 0;
 484 error:
 485         if (as->dma.chan_rx)
 486                 dma_release_channel(as->dma.chan_rx);
 487         if (as->dma.chan_tx)
 488                 dma_release_channel(as->dma.chan_tx);
 489         return err;
 490 }
 491
 492 static void atmel_spi_stop_dma(struct atmel_spi *as)
 493 {
 494         if (as->dma.chan_rx)
 495                 as->dma.chan_rx->device->device_control(as->dma.chan_rx,
 496                                                         DMA_TERMINATE_ALL, 0);
 497         if (as->dma.chan_tx)
 498                 as->dma.chan_tx->device->device_control(as->dma.chan_tx,
 499                                                         DMA_TERMINATE_ALL, 0);
 500 }
 501
 502 static void atmel_spi_release_dma(struct atmel_spi *as)
 503 {
 504         if (as->dma.chan_rx)
 505                 dma_release_channel(as->dma.chan_rx);
 506         if (as->dma.chan_tx)
 507                 dma_release_channel(as->dma.chan_tx);
 508 }
 509
 510 /* This function is called by the DMA driver from tasklet context */
 511 static void dma_callback(void *data)
 512 {
 513         struct spi_master       *master = data;
 514         struct atmel_spi        *as = spi_master_get_devdata(master);
 515
 516         /* trigger SPI tasklet */
 517         tasklet_schedule(&as->tasklet);
 518 }
 519
 520 /*
 521  * Next transfer using PIO.
 522  * lock is held, spi tasklet is blocked
 523  */
 524 static void atmel_spi_next_xfer_pio(struct spi_master *master,
 525                                 struct spi_transfer *xfer)
 526 {
 527         struct atmel_spi        *as = spi_master_get_devdata(master);
 528
 529         dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_pio\n");
 530
 531         as->current_remaining_bytes = xfer->len;
 532
 533         /* Make sure data is not remaining in RDR */
 534         spi_readl(as, RDR);
 535         while (spi_readl(as, SR) & SPI_BIT(RDRF)) {
 536                 spi_readl(as, RDR);
 537                 cpu_relax();
 538         }
 539
 540         if (xfer->tx_buf)
 541                 if (xfer->bits_per_word > 8)
 542                         spi_writel(as, TDR, *(u16 *)(xfer->tx_buf));
 543                 else
 544                         spi_writel(as, TDR, *(u8 *)(xfer->tx_buf));
 545         else
 546                 spi_writel(as, TDR, 0);
 547
 548         dev_dbg(master->dev.parent,
 549                 "  start pio xfer %p: len %u tx %p rx %p bitpw %d\n",
 550                 xfer, xfer->len, xfer->tx_buf, xfer->rx_buf,
 551                 xfer->bits_per_word);
 552
 553         /* Enable relevant interrupts */
 554         spi_writel(as, IER, SPI_BIT(RDRF) | SPI_BIT(OVRES));
 555 }
 556
 557 /*
 558  * Submit next transfer for DMA.
 559  * lock is held, spi tasklet is blocked
 560  */
 561 static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
 562                                 struct spi_transfer *xfer,
 563                                 u32 *plen)
 564 {
 565         struct atmel_spi        *as = spi_master_get_devdata(master);
 566         struct dma_chan         *rxchan = as->dma.chan_rx;
 567         struct dma_chan         *txchan = as->dma.chan_tx;
 568         struct dma_async_tx_descriptor *rxdesc;
 569         struct dma_async_tx_descriptor *txdesc;
 570         struct dma_slave_config slave_config;
 571         dma_cookie_t            cookie;
 572         u32     len = *plen;
 573
 574         dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_dma_submit\n");
 575
 576         /* Check that the channels are available */
 577         if (!rxchan || !txchan)
 578                 return -ENODEV;
 579
 580         /* release lock for DMA operations */
 581         atmel_spi_unlock(as);
 582
 583         /* prepare the RX dma transfer */
 584         sg_init_table(&as->dma.sgrx, 1);
 585         if (xfer->rx_buf) {
 586                 as->dma.sgrx.dma_address = xfer->rx_dma + xfer->len - *plen;
 587         } else {
 588                 as->dma.sgrx.dma_address = as->buffer_dma;
 589                 if (len > BUFFER_SIZE)
 590                         len = BUFFER_SIZE;
 591         }
 592
 593         /* prepare the TX dma transfer */
 594         sg_init_table(&as->dma.sgtx, 1);
 595         if (xfer->tx_buf) {
 596                 as->dma.sgtx.dma_address = xfer->tx_dma + xfer->len - *plen;
 597         } else {
 598                 as->dma.sgtx.dma_address = as->buffer_dma;
 599                 if (len > BUFFER_SIZE)
 600                         len = BUFFER_SIZE;
 601                 memset(as->buffer, 0, len);
 602         }
 603
 604         sg_dma_len(&as->dma.sgtx) = len;
 605         sg_dma_len(&as->dma.sgrx) = len;
 606
 607         *plen = len;
 608
 609         if (atmel_spi_dma_slave_config(as, &slave_config, 8))
 610                 goto err_exit;
 611
 612         /* Send both scatterlists */
 613         rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
 614                                         &as->dma.sgrx,
 615                                         1,
 616                                         DMA_FROM_DEVICE,
 617                                         DMA_PREP_INTERRUPT | DMA_CTRL_ACK,
 618                                         NULL);
 619         if (!rxdesc)
 620                 goto err_dma;
 621
 622         txdesc = txchan->device->device_prep_slave_sg(txchan,
 623                                         &as->dma.sgtx,
 624                                         1,
 625                                         DMA_TO_DEVICE,
 626                                         DMA_PREP_INTERRUPT | DMA_CTRL_ACK,
 627                                         NULL);
 628         if (!txdesc)
 629                 goto err_dma;
 630
 631         dev_dbg(master->dev.parent,
 632                 "  start dma xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
 633                 xfer, xfer->len, xfer->tx_buf, (unsigned long long)xfer->tx_dma,
 634                 xfer->rx_buf, (unsigned long long)xfer->rx_dma);
 635
 636         /* Enable relevant interrupts */
 637         spi_writel(as, IER, SPI_BIT(OVRES));
 638
 639         /* Put the callback on the RX transfer only, that should finish last */
 640         rxdesc->callback = dma_callback;
 641         rxdesc->callback_param = master;
 642
 643         /* Submit and fire RX and TX with TX last so we're ready to read! */
 644         cookie = rxdesc->tx_submit(rxdesc);
 645         if (dma_submit_error(cookie))
 646                 goto err_dma;
 647         cookie = txdesc->tx_submit(txdesc);
 648         if (dma_submit_error(cookie))
 649                 goto err_dma;
 650         rxchan->device->device_issue_pending(rxchan);
 651         txchan->device->device_issue_pending(txchan);
 652
 653         /* take back lock */
 654         atmel_spi_lock(as);
 655         return 0;
 656
 657 err_dma:
 658         spi_writel(as, IDR, SPI_BIT(OVRES));
 659         atmel_spi_stop_dma(as);
 660 err_exit:
 661         atmel_spi_lock(as);
 662         return -ENOMEM;
 663 }
 664
 665 static void atmel_spi_next_xfer_data(struct spi_master *master,
 666                                 struct spi_transfer *xfer,
 667                                 dma_addr_t *tx_dma,
 668                                 dma_addr_t *rx_dma,
 669                                 u32 *plen)
 670 {
 671         struct atmel_spi        *as = spi_master_get_devdata(master);
 672         u32                     len = *plen;
 673
 674         /* use scratch buffer only when rx or tx data is unspecified */
 675         if (xfer->rx_buf)
 676                 *rx_dma = xfer->rx_dma + xfer->len - *plen;
 677         else {
 678                 *rx_dma = as->buffer_dma;
 679                 if (len > BUFFER_SIZE)
 680                         len = BUFFER_SIZE;
 681         }
 682
 683         if (xfer->tx_buf)
 684                 *tx_dma = xfer->tx_dma + xfer->len - *plen;
 685         else {
 686                 *tx_dma = as->buffer_dma;
 687                 if (len > BUFFER_SIZE)
 688                         len = BUFFER_SIZE;
 689                 memset(as->buffer, 0, len);
 690                 dma_sync_single_for_device(&as->pdev->dev,
 691                                 as->buffer_dma, len, DMA_TO_DEVICE);
 692         }
 693
 694         *plen = len;
 695 }
 696
 697 /*
 698  * Submit next transfer for PDC.
 699  * lock is held, spi irq is blocked
 700  */
 701 static void atmel_spi_pdc_next_xfer(struct spi_master *master,
 702                                 struct spi_message *msg)
 703 {
 704         struct atmel_spi        *as = spi_master_get_devdata(master);
 705         struct spi_transfer     *xfer;
 706         u32                     len, remaining;
 707         u32                     ieval;
 708         dma_addr_t              tx_dma, rx_dma;
 709
 710         if (!as->current_transfer)
 711                 xfer = list_entry(msg->transfers.next,
 712                                 struct spi_transfer, transfer_list);
 713         else if (!as->next_transfer)
 714                 xfer = list_entry(as->current_transfer->transfer_list.next,
 715                                 struct spi_transfer, transfer_list);
 716         else
 717                 xfer = NULL;
 718
 719         if (xfer) {
 720                 spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
 721
 722                 len = xfer->len;
 723                 atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
 724                 remaining = xfer->len - len;
 725
 726                 spi_writel(as, RPR, rx_dma);
 727                 spi_writel(as, TPR, tx_dma);
 728
 729                 if (msg->spi->bits_per_word > 8)
 730                         len >>= 1;
 731                 spi_writel(as, RCR, len);
 732                 spi_writel(as, TCR, len);
 733
 734                 dev_dbg(&msg->spi->dev,
 735                         "  start xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
 736                         xfer, xfer->len, xfer->tx_buf,
 737                         (unsigned long long)xfer->tx_dma, xfer->rx_buf,
 738                         (unsigned long long)xfer->rx_dma);
 739         } else {
 740                 xfer = as->next_transfer;
 741                 remaining = as->next_remaining_bytes;
 742         }
 743
 744         as->current_transfer = xfer;
 745         as->current_remaining_bytes = remaining;
 746
 747         if (remaining > 0)
 748                 len = remaining;
 749         else if (!atmel_spi_xfer_is_last(msg, xfer)
 750                         && atmel_spi_xfer_can_be_chained(xfer)) {
 751                 xfer = list_entry(xfer->transfer_list.next,
 752                                 struct spi_transfer, transfer_list);
 753                 len = xfer->len;
 754         } else
 755                 xfer = NULL;
 756
 757         as->next_transfer = xfer;
 758
 759         if (xfer) {
 760                 u32     total;
 761
 762                 total = len;
 763                 atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
 764                 as->next_remaining_bytes = total - len;
 765
 766                 spi_writel(as, RNPR, rx_dma);
 767                 spi_writel(as, TNPR, tx_dma);
 768
 769                 if (msg->spi->bits_per_word > 8)
 770                         len >>= 1;
 771                 spi_writel(as, RNCR, len);
 772                 spi_writel(as, TNCR, len);
 773
 774                 dev_dbg(&msg->spi->dev,
 775                         "  next xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
 776                         xfer, xfer->len, xfer->tx_buf,
 777                         (unsigned long long)xfer->tx_dma, xfer->rx_buf,
 778                         (unsigned long long)xfer->rx_dma);
 779                 ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES);
 780         } else {
 781                 spi_writel(as, RNCR, 0);
 782                 spi_writel(as, TNCR, 0);
 783                 ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES);
 784         }
 785
 786         /* REVISIT: We're waiting for ENDRX before we start the next
 787          * transfer because we need to handle some difficult timing
 788          * issues otherwise. If we wait for ENDTX in one transfer and
 789          * then starts waiting for ENDRX in the next, it's difficult
 790          * to tell the difference between the ENDRX interrupt we're
 791          * actually waiting for and the ENDRX interrupt of the
 792          * previous transfer.
 793          *
 794          * It should be doable, though. Just not now...
 795          */
 796         spi_writel(as, IER, ieval);
 797         spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
 798 }
 799
 800 /*
 801  * Choose way to submit next transfer and start it.
 802  * lock is held, spi tasklet is blocked
 803  */
 804 static void atmel_spi_dma_next_xfer(struct spi_master *master,
 805                                 struct spi_message *msg)
 806 {
 807         struct atmel_spi        *as = spi_master_get_devdata(master);
 808         struct spi_transfer     *xfer;
 809         u32     remaining, len;
 810
 811         remaining = as->current_remaining_bytes;
 812         if (remaining) {
 813                 xfer = as->current_transfer;
 814                 len = remaining;
 815         } else {
 816                 if (!as->current_transfer)
 817                         xfer = list_entry(msg->transfers.next,
 818                                 struct spi_transfer, transfer_list);
 819                 else
 820                         xfer = list_entry(
 821                                 as->current_transfer->transfer_list.next,
 822                                         struct spi_transfer, transfer_list);
 823
 824                 as->current_transfer = xfer;
 825                 len = xfer->len;
 826         }
 827
 828         if (atmel_spi_use_dma(as, xfer)) {
 829                 u32 total = len;
 830                 if (!atmel_spi_next_xfer_dma_submit(master, xfer, &len)) {
 831                         as->current_remaining_bytes = total - len;
 832                         return;
 833                 } else {
 834                         dev_err(&msg->spi->dev, "unable to use DMA, fallback to PIO\n");
 835                 }
 836         }
 837
 838         /* use PIO if error appened using DMA */
 839         atmel_spi_next_xfer_pio(master, xfer);
 840 }
 841
 842 static void atmel_spi_next_message(struct spi_master *master)
 843 {
 844         struct atmel_spi        *as = spi_master_get_devdata(master);
 845         struct spi_message      *msg;
 846         struct spi_device       *spi;
 847
 848         BUG_ON(as->current_transfer);
 849
 850         msg = list_entry(as->queue.next, struct spi_message, queue);
 851         spi = msg->spi;
 852
 853         dev_dbg(master->dev.parent, "start message %p for %s\n",
 854                         msg, dev_name(&spi->dev));
 855
 856         /* select chip if it's not still active */
 857         if (as->stay) {
 858                 if (as->stay != spi) {
 859                         cs_deactivate(as, as->stay);
 860                         cs_activate(as, spi);
 861                 }
 862                 as->stay = NULL;
 863         } else
 864                 cs_activate(as, spi);
 865
 866         if (as->use_pdc)
 867                 atmel_spi_pdc_next_xfer(master, msg);
 868         else
 869                 atmel_spi_dma_next_xfer(master, msg);
 870 }
 871
 872 /*
 873  * For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma:
 874  *  - The buffer is either valid for CPU access, else NULL
 875  *  - If the buffer is valid, so is its DMA address
 876  *
 877  * This driver manages the dma address unless message->is_dma_mapped.
 878  */
 879 static int
 880 atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
 881 {
 882         struct device   *dev = &as->pdev->dev;
 883
 884         xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
 885         if (xfer->tx_buf) {
 886                 /* tx_buf is a const void* where we need a void * for the dma
 887                  * mapping */
 888                 void *nonconst_tx = (void *)xfer->tx_buf;
 889
 890                 xfer->tx_dma = dma_map_single(dev,
 891                                 nonconst_tx, xfer->len,
 892                                 DMA_TO_DEVICE);
 893                 if (dma_mapping_error(dev, xfer->tx_dma))
 894                         return -ENOMEM;
 895         }
 896         if (xfer->rx_buf) {
 897                 xfer->rx_dma = dma_map_single(dev,
 898                                 xfer->rx_buf, xfer->len,
 899                                 DMA_FROM_DEVICE);
 900                 if (dma_mapping_error(dev, xfer->rx_dma)) {
 901                         if (xfer->tx_buf)
 902                                 dma_unmap_single(dev,
 903                                                 xfer->tx_dma, xfer->len,
 904                                                 DMA_TO_DEVICE);
 905                         return -ENOMEM;
 906                 }
 907         }
 908         return 0;
 909 }
 910
 911 static void atmel_spi_dma_unmap_xfer(struct spi_master *master,
 912                                      struct spi_transfer *xfer)
 913 {
 914         if (xfer->tx_dma != INVALID_DMA_ADDRESS)
 915                 dma_unmap_single(master->dev.parent, xfer->tx_dma,
 916                                  xfer->len, DMA_TO_DEVICE);
 917         if (xfer->rx_dma != INVALID_DMA_ADDRESS)
 918                 dma_unmap_single(master->dev.parent, xfer->rx_dma,
 919                                  xfer->len, DMA_FROM_DEVICE);
 920 }
 921
 922 static void atmel_spi_disable_pdc_transfer(struct atmel_spi *as)
 923 {
 924         spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
 925 }
 926
 927 static void
 928 atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
 929                 struct spi_message *msg, int stay)
 930 {
 931         if (!stay || as->done_status < 0)
 932                 cs_deactivate(as, msg->spi);
 933         else
 934                 as->stay = msg->spi;
 935
 936         list_del(&msg->queue);
 937         msg->status = as->done_status;
 938
 939         dev_dbg(master->dev.parent,
 940                 "xfer complete: %u bytes transferred\n",
 941                 msg->actual_length);
 942
 943         atmel_spi_unlock(as);
 944         msg->complete(msg->context);
 945         atmel_spi_lock(as);
 946
 947         as->current_transfer = NULL;
 948         as->next_transfer = NULL;
 949         as->done_status = 0;
 950
 951         /* continue if needed */
 952         if (list_empty(&as->queue) || as->stopping) {
 953                 if (as->use_pdc)
 954                         atmel_spi_disable_pdc_transfer(as);
 955         } else {
 956                 atmel_spi_next_message(master);
 957         }
 958 }
 959
 960 /* Called from IRQ
 961  * lock is held
 962  *
 963  * Must update "current_remaining_bytes" to keep track of data
 964  * to transfer.
 965  */
 966 static void
 967 atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
 968 {
 969         u8              *txp;
 970         u8              *rxp;
 971         u16             *txp16;
 972         u16             *rxp16;
 973         unsigned long   xfer_pos = xfer->len - as->current_remaining_bytes;
 974
 975         if (xfer->rx_buf) {
 976                 if (xfer->bits_per_word > 8) {
 977                         rxp16 = (u16 *)(((u8 *)xfer->rx_buf) + xfer_pos);
 978                         *rxp16 = spi_readl(as, RDR);
 979                 } else {
 980                         rxp = ((u8 *)xfer->rx_buf) + xfer_pos;
 981                         *rxp = spi_readl(as, RDR);
 982                 }
 983         } else {
 984                 spi_readl(as, RDR);
 985         }
 986         if (xfer->bits_per_word > 8) {
 987                 as->current_remaining_bytes -= 2;
 988                 if (as->current_remaining_bytes < 0)
 989                         as->current_remaining_bytes = 0;
 990         } else {
 991                 as->current_remaining_bytes--;
 992         }
 993
 994         if (as->current_remaining_bytes) {
 995                 if (xfer->tx_buf) {
 996                         if (xfer->bits_per_word > 8) {
 997                                 txp16 = (u16 *)(((u8 *)xfer->tx_buf)
 998                                                         + xfer_pos + 2);
 999                                 spi_writel(as, TDR, *txp16);
1000                         } else {
1001                                 txp = ((u8 *)xfer->tx_buf) + xfer_pos + 1;
1002                                 spi_writel(as, TDR, *txp);
1003                         }
1004                 } else {
1005                         spi_writel(as, TDR, 0);
1006                 }
1007         }
1008 }
1009
1010 /* Tasklet
1011  * Called from DMA callback + pio transfer and overrun IRQ.
1012  */
1013 static void atmel_spi_tasklet_func(unsigned long data)
1014 {
1015         struct spi_master       *master = (struct spi_master *)data;
1016         struct atmel_spi        *as = spi_master_get_devdata(master);
1017         struct spi_message      *msg;
1018         struct spi_transfer     *xfer;
1019
1020         dev_vdbg(master->dev.parent, "atmel_spi_tasklet_func\n");
1021
1022         atmel_spi_lock(as);
1023
1024         xfer = as->current_transfer;
1025
1026         if (xfer == NULL)
1027                 /* already been there */
1028                 goto tasklet_out;
1029
1030         msg = list_entry(as->queue.next, struct spi_message, queue);
1031
1032         if (as->current_remaining_bytes == 0) {
1033                 if (as->done_status < 0) {
1034                         /* error happened (overrun) */
1035                         if (atmel_spi_use_dma(as, xfer))
1036                                 atmel_spi_stop_dma(as);
1037                 } else {
1038                         /* only update length if no error */
1039                         msg->actual_length += xfer->len;
1040                 }
1041
1042                 if (atmel_spi_use_dma(as, xfer))
1043                         if (!msg->is_dma_mapped)
1044                                 atmel_spi_dma_unmap_xfer(master, xfer);
1045
1046                 if (xfer->delay_usecs)
1047                         udelay(xfer->delay_usecs);
1048
1049                 if (atmel_spi_xfer_is_last(msg, xfer) || as->done_status < 0) {
1050                         /* report completed (or erroneous) message */
1051                         atmel_spi_msg_done(master, as, msg, xfer->cs_change);
1052                 } else {
1053                         if (xfer->cs_change) {
1054                                 cs_deactivate(as, msg->spi);
1055                                 udelay(1);
1056                                 cs_activate(as, msg->spi);
1057                         }
1058
1059                         /*
1060                          * Not done yet. Submit the next transfer.
1061                          *
1062                          * FIXME handle protocol options for xfer
1063                          */
1064                         atmel_spi_dma_next_xfer(master, msg);
1065                 }
1066         } else {
1067                 /*
1068                  * Keep going, we still have data to send in
1069                  * the current transfer.
1070                  */
1071                 atmel_spi_dma_next_xfer(master, msg);
1072         }
1073
1074 tasklet_out:
1075         atmel_spi_unlock(as);
1076 }
1077
1078 /* Interrupt
1079  *
1080  * No need for locking in this Interrupt handler: done_status is the
1081  * only information modified. What we need is the update of this field
1082  * before tasklet runs. This is ensured by using barrier.
1083  */
1084 static irqreturn_t
1085 atmel_spi_pio_interrupt(int irq, void *dev_id)
1086 {
1087         struct spi_master       *master = dev_id;
1088         struct atmel_spi        *as = spi_master_get_devdata(master);
1089         u32                     status, pending, imr;
1090         struct spi_transfer     *xfer;
1091         int                     ret = IRQ_NONE;
1092
1093         imr = spi_readl(as, IMR);
1094         status = spi_readl(as, SR);
1095         pending = status & imr;
1096
1097         if (pending & SPI_BIT(OVRES)) {
1098                 ret = IRQ_HANDLED;
1099                 spi_writel(as, IDR, SPI_BIT(OVRES));
1100                 dev_warn(master->dev.parent, "overrun\n");
1101
1102                 /*
1103                  * When we get an overrun, we disregard the current
1104                  * transfer. Data will not be copied back from any
1105                  * bounce buffer and msg->actual_len will not be
1106                  * updated with the last xfer.
1107                  *
1108                  * We will also not process any remaning transfers in
1109                  * the message.
1110                  *
1111                  * All actions are done in tasklet with done_status indication
1112                  */
1113                 as->done_status = -EIO;
1114                 smp_wmb();
1115
1116                 /* Clear any overrun happening while cleaning up */
1117                 spi_readl(as, SR);
1118
1119                 tasklet_schedule(&as->tasklet);
1120
1121         } else if (pending & SPI_BIT(RDRF)) {
1122                 atmel_spi_lock(as);
1123
1124                 if (as->current_remaining_bytes) {
1125                         ret = IRQ_HANDLED;
1126                         xfer = as->current_transfer;
1127                         atmel_spi_pump_pio_data(as, xfer);
1128                         if (!as->current_remaining_bytes) {
1129                                 /* no more data to xfer, kick tasklet */
1130                                 spi_writel(as, IDR, pending);
1131                                 tasklet_schedule(&as->tasklet);
1132                         }
1133                 }
1134
1135                 atmel_spi_unlock(as);
1136         } else {
1137                 WARN_ONCE(pending, "IRQ not handled, pending = %x\n", pending);
1138                 ret = IRQ_HANDLED;
1139                 spi_writel(as, IDR, pending);
1140         }
1141
1142         return ret;
1143 }
1144
1145 static irqreturn_t
1146 atmel_spi_pdc_interrupt(int irq, void *dev_id)
1147 {
1148         struct spi_master       *master = dev_id;
1149         struct atmel_spi        *as = spi_master_get_devdata(master);
1150         struct spi_message      *msg;
1151         struct spi_transfer     *xfer;
1152         u32                     status, pending, imr;
1153         int                     ret = IRQ_NONE;
1154
1155         atmel_spi_lock(as);
1156
1157         xfer = as->current_transfer;
1158         msg = list_entry(as->queue.next, struct spi_message, queue);
1159
1160         imr = spi_readl(as, IMR);
1161         status = spi_readl(as, SR);
1162         pending = status & imr;
1163
1164         if (pending & SPI_BIT(OVRES)) {
1165                 int timeout;
1166
1167                 ret = IRQ_HANDLED;
1168
1169                 spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
1170                                      | SPI_BIT(OVRES)));
1171
1172                 /*
1173                  * When we get an overrun, we disregard the current
1174                  * transfer. Data will not be copied back from any
1175                  * bounce buffer and msg->actual_len will not be
1176                  * updated with the last xfer.
1177                  *
1178                  * We will also not process any remaning transfers in
1179                  * the message.
1180                  *
1181                  * First, stop the transfer and unmap the DMA buffers.
1182                  */
1183                 spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
1184                 if (!msg->is_dma_mapped)
1185                         atmel_spi_dma_unmap_xfer(master, xfer);
1186
1187                 /* REVISIT: udelay in irq is unfriendly */
1188                 if (xfer->delay_usecs)
1189                         udelay(xfer->delay_usecs);
1190
1191                 dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n",
1192                          spi_readl(as, TCR), spi_readl(as, RCR));
1193
1194                 /*
1195                  * Clean up DMA registers and make sure the data
1196                  * registers are empty.
1197                  */
1198                 spi_writel(as, RNCR, 0);
1199                 spi_writel(as, TNCR, 0);
1200                 spi_writel(as, RCR, 0);
1201                 spi_writel(as, TCR, 0);
1202                 for (timeout = 1000; timeout; timeout--)
1203                         if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
1204                                 break;
1205                 if (!timeout)
1206                         dev_warn(master->dev.parent,
1207                                  "timeout waiting for TXEMPTY");
1208                 while (spi_readl(as, SR) & SPI_BIT(RDRF))
1209                         spi_readl(as, RDR);
1210
1211                 /* Clear any overrun happening while cleaning up */
1212                 spi_readl(as, SR);
1213
1214                 as->done_status = -EIO;
1215                 atmel_spi_msg_done(master, as, msg, 0);
1216         } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) {
1217                 ret = IRQ_HANDLED;
1218
1219                 spi_writel(as, IDR, pending);
1220
1221                 if (as->current_remaining_bytes == 0) {
1222                         msg->actual_length += xfer->len;
1223
1224                         if (!msg->is_dma_mapped)
1225                                 atmel_spi_dma_unmap_xfer(master, xfer);
1226
1227                         /* REVISIT: udelay in irq is unfriendly */
1228                         if (xfer->delay_usecs)
1229                                 udelay(xfer->delay_usecs);
1230
1231                         if (atmel_spi_xfer_is_last(msg, xfer)) {
1232                                 /* report completed message */
1233                                 atmel_spi_msg_done(master, as, msg,
1234                                                 xfer->cs_change);
1235                         } else {
1236                                 if (xfer->cs_change) {
1237                                         cs_deactivate(as, msg->spi);
1238                                         udelay(1);
1239                                         cs_activate(as, msg->spi);
1240                                 }
1241
1242                                 /*
1243                                  * Not done yet. Submit the next transfer.
1244                                  *
1245                                  * FIXME handle protocol options for xfer
1246                                  */
1247                                 atmel_spi_pdc_next_xfer(master, msg);
1248                         }
1249                 } else {
1250                         /*
1251                          * Keep going, we still have data to send in
1252                          * the current transfer.
1253                          */
1254                         atmel_spi_pdc_next_xfer(master, msg);
1255                 }
1256         }
1257
1258         atmel_spi_unlock(as);
1259
1260         return ret;
1261 }
1262
1263 static int atmel_spi_setup(struct spi_device *spi)
1264 {
1265         struct atmel_spi        *as;
1266         struct atmel_spi_device *asd;
1267         u32                     scbr, csr;
1268         unsigned int            bits = spi->bits_per_word;
1269         unsigned long           bus_hz;
1270         unsigned int            npcs_pin;
1271         int                     ret;
1272
1273         as = spi_master_get_devdata(spi->master);
1274
1275         if (as->stopping)
1276                 return -ESHUTDOWN;
1277
1278         if (spi->chip_select > spi->master->num_chipselect) {
1279                 dev_dbg(&spi->dev,
1280                                 "setup: invalid chipselect %u (%u defined)\n",
1281                                 spi->chip_select, spi->master->num_chipselect);
1282                 return -EINVAL;
1283         }
1284
1285         /* see notes above re chipselect */
1286         if (!atmel_spi_is_v2(as)
1287                         && spi->chip_select == 0
1288                         && (spi->mode & SPI_CS_HIGH)) {
1289                 dev_dbg(&spi->dev, "setup: can't be active-high\n");
1290                 return -EINVAL;
1291         }
1292
1293         /* v1 chips start out at half the peripheral bus speed. */
1294         bus_hz = clk_get_rate(as->clk);
1295         if (!atmel_spi_is_v2(as))
1296                 bus_hz /= 2;
1297
1298         if (spi->max_speed_hz) {
1299                 /*
1300                  * Calculate the lowest divider that satisfies the
1301                  * constraint, assuming div32/fdiv/mbz == 0.
1302                  */
1303                 scbr = DIV_ROUND_UP(bus_hz, spi->max_speed_hz);
1304
1305                 /*
1306                  * If the resulting divider doesn't fit into the
1307                  * register bitfield, we can't satisfy the constraint.
1308                  */
1309                 if (scbr >= (1 << SPI_SCBR_SIZE)) {
1310                         dev_dbg(&spi->dev,
1311                                 "setup: %d Hz too slow, scbr %u; min %ld Hz\n",
1312                                 spi->max_speed_hz, scbr, bus_hz/255);
1313                         return -EINVAL;
1314                 }
1315         } else
1316                 /* speed zero means "as slow as possible" */
1317                 scbr = 0xff;
1318
1319         csr = SPI_BF(SCBR, scbr) | SPI_BF(BITS, bits - 8);
1320         if (spi->mode & SPI_CPOL)
1321                 csr |= SPI_BIT(CPOL);
1322         if (!(spi->mode & SPI_CPHA))
1323                 csr |= SPI_BIT(NCPHA);
1324
1325         /* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
1326          *
1327          * DLYBCT would add delays between words, slowing down transfers.
1328          * It could potentially be useful to cope with DMA bottlenecks, but
1329          * in those cases it's probably best to just use a lower bitrate.
1330          */
1331         csr |= SPI_BF(DLYBS, 0);
1332         csr |= SPI_BF(DLYBCT, 0);
1333
1334         /* chipselect must have been muxed as GPIO (e.g. in board setup) */
1335         npcs_pin = (unsigned int)spi->controller_data;
1336
1337         if (gpio_is_valid(spi->cs_gpio))
1338                 npcs_pin = spi->cs_gpio;
1339
1340         asd = spi->controller_state;
1341         if (!asd) {
1342                 asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL);
1343                 if (!asd)
1344                         return -ENOMEM;
1345
1346                 ret = gpio_request(npcs_pin, dev_name(&spi->dev));
1347                 if (ret) {
1348                         kfree(asd);
1349                         return ret;
1350                 }
1351
1352                 asd->npcs_pin = npcs_pin;
1353                 spi->controller_state = asd;
1354                 gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH));
1355         } else {
1356                 atmel_spi_lock(as);
1357                 if (as->stay == spi)
1358                         as->stay = NULL;
1359                 cs_deactivate(as, spi);
1360                 atmel_spi_unlock(as);
1361         }
1362
1363         asd->csr = csr;
1364
1365         dev_dbg(&spi->dev,
1366                 "setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n",
1367                 bus_hz / scbr, bits, spi->mode, spi->chip_select, csr);
1368
1369         if (!atmel_spi_is_v2(as))
1370                 spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
1371
1372         return 0;
1373 }
1374
1375 static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
1376 {
1377         struct atmel_spi        *as;
1378         struct spi_transfer     *xfer;
1379         struct device           *controller = spi->master->dev.parent;
1380         u8                      bits;
1381         struct atmel_spi_device *asd;
1382
1383         as = spi_master_get_devdata(spi->master);
1384
1385         dev_dbg(controller, "new message %p submitted for %s\n",
1386                         msg, dev_name(&spi->dev));
1387
1388         if (unlikely(list_empty(&msg->transfers)))
1389                 return -EINVAL;
1390
1391         if (as->stopping)
1392                 return -ESHUTDOWN;
1393
1394         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1395                 if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) {
1396                         dev_dbg(&spi->dev, "missing rx or tx buf\n");
1397                         return -EINVAL;
1398                 }
1399
1400                 if (xfer->bits_per_word) {
1401                         asd = spi->controller_state;
1402                         bits = (asd->csr >> 4) & 0xf;
1403                         if (bits != xfer->bits_per_word - 8) {
1404                                 dev_dbg(&spi->dev, "you can't yet change "
1405                                          "bits_per_word in transfers\n");
1406                                 return -ENOPROTOOPT;
1407                         }
1408                 }
1409
1410                 if (xfer->bits_per_word > 8) {
1411                         if (xfer->len % 2) {
1412                                 dev_dbg(&spi->dev, "buffer len should be 16 bits aligned\n");
1413                                 return -EINVAL;
1414                         }
1415                 }
1416
1417                 /* FIXME implement these protocol options!! */
1418                 if (xfer->speed_hz < spi->max_speed_hz) {
1419                         dev_dbg(&spi->dev, "can't change speed in transfer\n");
1420                         return -ENOPROTOOPT;
1421                 }
1422
1423                 /*
1424                  * DMA map early, for performance (empties dcache ASAP) and
1425                  * better fault reporting.
1426                  */
1427                 if ((!msg->is_dma_mapped) && (atmel_spi_use_dma(as, xfer)
1428                         || as->use_pdc)) {
1429                         if (atmel_spi_dma_map_xfer(as, xfer) < 0)
1430                                 return -ENOMEM;
1431                 }
1432         }
1433
1434 #ifdef VERBOSE
1435         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1436                 dev_dbg(controller,
1437                         "  xfer %p: len %u tx %p/%08x rx %p/%08x\n",
1438                         xfer, xfer->len,
1439                         xfer->tx_buf, xfer->tx_dma,
1440                         xfer->rx_buf, xfer->rx_dma);
1441         }
1442 #endif
1443
1444         msg->status = -EINPROGRESS;
1445         msg->actual_length = 0;
1446
1447         atmel_spi_lock(as);
1448         list_add_tail(&msg->queue, &as->queue);
1449         if (!as->current_transfer)
1450                 atmel_spi_next_message(spi->master);
1451         atmel_spi_unlock(as);
1452
1453         return 0;
1454 }
1455
1456 static void atmel_spi_cleanup(struct spi_device *spi)
1457 {
1458         struct atmel_spi        *as = spi_master_get_devdata(spi->master);
1459         struct atmel_spi_device *asd = spi->controller_state;
1460         unsigned                gpio = (unsigned) spi->controller_data;
1461
1462         if (!asd)
1463                 return;
1464
1465         atmel_spi_lock(as);
1466         if (as->stay == spi) {
1467                 as->stay = NULL;
1468                 cs_deactivate(as, spi);
1469         }
1470         atmel_spi_unlock(as);
1471
1472         spi->controller_state = NULL;
1473         gpio_free(gpio);
1474         kfree(asd);
1475 }
1476
1477 static inline unsigned int atmel_get_version(struct atmel_spi *as)
1478 {
1479         return spi_readl(as, VERSION) & 0x00000fff;
1480 }
1481
1482 static void atmel_get_caps(struct atmel_spi *as)
1483 {
1484         unsigned int version;
1485
1486         version = atmel_get_version(as);
1487         dev_info(&as->pdev->dev, "version: 0x%x\n", version);
1488
1489         as->caps.is_spi2 = version > 0x121;
1490         as->caps.has_wdrbt = version >= 0x210;
1491         as->caps.has_dma_support = version >= 0x212;
1492 }
1493
1494 /*-------------------------------------------------------------------------*/
1495
1496 static int atmel_spi_probe(struct platform_device *pdev)
1497 {
1498         struct resource         *regs;
1499         int                     irq;
1500         struct clk              *clk;
1501         int                     ret;
1502         struct spi_master       *master;
1503         struct atmel_spi        *as;
1504
1505         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1506         if (!regs)
1507                 return -ENXIO;
1508
1509         irq = platform_get_irq(pdev, 0);
1510         if (irq < 0)
1511                 return irq;
1512
1513         clk = clk_get(&pdev->dev, "spi_clk");
1514         if (IS_ERR(clk))
1515                 return PTR_ERR(clk);
1516
1517         /* setup spi core then atmel-specific driver state */
1518         ret = -ENOMEM;
1519         master = spi_alloc_master(&pdev->dev, sizeof *as);
1520         if (!master)
1521                 goto out_free;
1522
1523         /* the spi->mode bits understood by this driver: */
1524         master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
1525         master->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 16);
1526         master->dev.of_node = pdev->dev.of_node;
1527         master->bus_num = pdev->id;
1528         master->num_chipselect = master->dev.of_node ? 0 : 4;
1529         master->setup = atmel_spi_setup;
1530         master->transfer = atmel_spi_transfer;
1531         master->cleanup = atmel_spi_cleanup;
1532         platform_set_drvdata(pdev, master);
1533
1534         as = spi_master_get_devdata(master);
1535
1536         /*
1537          * Scratch buffer is used for throwaway rx and tx data.
1538          * It's coherent to minimize dcache pollution.
1539          */
1540         as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
1541                                         &as->buffer_dma, GFP_KERNEL);
1542         if (!as->buffer)
1543                 goto out_free;
1544
1545         spin_lock_init(&as->lock);
1546         INIT_LIST_HEAD(&as->queue);
1547
1548         as->pdev = pdev;
1549         as->regs = ioremap(regs->start, resource_size(regs));
1550         if (!as->regs)
1551                 goto out_free_buffer;
1552         as->phybase = regs->start;
1553         as->irq = irq;
1554         as->clk = clk;
1555
1556         atmel_get_caps(as);
1557
1558         as->use_dma = false;
1559         as->use_pdc = false;
1560         if (as->caps.has_dma_support) {
1561                 if (atmel_spi_configure_dma(as) == 0)
1562                         as->use_dma = true;
1563         } else {
1564                 as->use_pdc = true;
1565         }
1566
1567         if (as->caps.has_dma_support && !as->use_dma)
1568                 dev_info(&pdev->dev, "Atmel SPI Controller using PIO only\n");
1569
1570         if (as->use_pdc) {
1571                 ret = request_irq(irq, atmel_spi_pdc_interrupt, 0,
1572                                         dev_name(&pdev->dev), master);
1573         } else {
1574                 tasklet_init(&as->tasklet, atmel_spi_tasklet_func,
1575                                         (unsigned long)master);
1576
1577                 ret = request_irq(irq, atmel_spi_pio_interrupt, 0,
1578                                         dev_name(&pdev->dev), master);
1579         }
1580         if (ret)
1581                 goto out_unmap_regs;
1582
1583         /* Initialize the hardware */
1584         ret = clk_prepare_enable(clk);
1585         if (ret)
1586                 goto out_unmap_regs;
1587         spi_writel(as, CR, SPI_BIT(SWRST));
1588         spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
1589         if (as->caps.has_wdrbt) {
1590                 spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
1591                                 | SPI_BIT(MSTR));
1592         } else {
1593                 spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
1594         }
1595
1596         if (as->use_pdc)
1597                 spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
1598         spi_writel(as, CR, SPI_BIT(SPIEN));
1599
1600         /* go! */
1601         dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
1602                         (unsigned long)regs->start, irq);
1603
1604         ret = spi_register_master(master);
1605         if (ret)
1606                 goto out_free_dma;
1607
1608         return 0;
1609
1610 out_free_dma:
1611         if (as->use_dma)
1612                 atmel_spi_release_dma(as);
1613
1614         spi_writel(as, CR, SPI_BIT(SWRST));
1615         spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
1616         clk_disable_unprepare(clk);
1617         free_irq(irq, master);
1618 out_unmap_regs:
1619         iounmap(as->regs);
1620 out_free_buffer:
1621         if (!as->use_pdc)
1622                 tasklet_kill(&as->tasklet);
1623         dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
1624                         as->buffer_dma);
1625 out_free:
1626         clk_put(clk);
1627         spi_master_put(master);
1628         return ret;
1629 }
1630
1631 static int atmel_spi_remove(struct platform_device *pdev)
1632 {
1633         struct spi_master       *master = platform_get_drvdata(pdev);
1634         struct atmel_spi        *as = spi_master_get_devdata(master);
1635         struct spi_message      *msg;
1636         struct spi_transfer     *xfer;
1637
1638         /* reset the hardware and block queue progress */
1639         spin_lock_irq(&as->lock);
1640         as->stopping = 1;
1641         if (as->use_dma) {
1642                 atmel_spi_stop_dma(as);
1643                 atmel_spi_release_dma(as);
1644         }
1645
1646         spi_writel(as, CR, SPI_BIT(SWRST));
1647         spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
1648         spi_readl(as, SR);
1649         spin_unlock_irq(&as->lock);
1650
1651         /* Terminate remaining queued transfers */
1652         list_for_each_entry(msg, &as->queue, queue) {
1653                 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1654                         if (!msg->is_dma_mapped
1655                                 && (atmel_spi_use_dma(as, xfer)
1656                                         || as->use_pdc))
1657                                 atmel_spi_dma_unmap_xfer(master, xfer);
1658                 }
1659                 msg->status = -ESHUTDOWN;
1660                 msg->complete(msg->context);
1661         }
1662
1663         if (!as->use_pdc)
1664                 tasklet_kill(&as->tasklet);
1665         dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
1666                         as->buffer_dma);
1667
1668         clk_disable_unprepare(as->clk);
1669         clk_put(as->clk);
1670         free_irq(as->irq, master);
1671         iounmap(as->regs);
1672
1673         spi_unregister_master(master);
1674
1675         return 0;
1676 }
1677
1678 #ifdef  CONFIG_PM
1679
1680 static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
1681 {
1682         struct spi_master       *master = platform_get_drvdata(pdev);
1683         struct atmel_spi        *as = spi_master_get_devdata(master);
1684
1685         clk_disable_unprepare(as->clk);
1686         return 0;
1687 }
1688
1689 static int atmel_spi_resume(struct platform_device *pdev)
1690 {
1691         struct spi_master       *master = platform_get_drvdata(pdev);
1692         struct atmel_spi        *as = spi_master_get_devdata(master);
1693
1694         return clk_prepare_enable(as->clk);
1695         return 0;
1696 }
1697
1698 #else
1699 #define atmel_spi_suspend       NULL
1700 #define atmel_spi_resume        NULL
1701 #endif
1702
1703 #if defined(CONFIG_OF)
1704 static const struct of_device_id atmel_spi_dt_ids[] = {
1705         { .compatible = "atmel,at91rm9200-spi" },
1706         { /* sentinel */ }
1707 };
1708
1709 MODULE_DEVICE_TABLE(of, atmel_spi_dt_ids);
1710 #endif
1711
1712 static struct platform_driver atmel_spi_driver = {
1713         .driver         = {
1714                 .name   = "atmel_spi",
1715                 .owner  = THIS_MODULE,
1716                 .of_match_table = of_match_ptr(atmel_spi_dt_ids),
1717         },
1718         .suspend        = atmel_spi_suspend,
1719         .resume         = atmel_spi_resume,
1720         .probe          = atmel_spi_probe,
1721         .remove         = atmel_spi_remove,
1722 };
1723 module_platform_driver(atmel_spi_driver);
1724
1725 MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
1726 MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
1727 MODULE_LICENSE("GPL");
1728 MODULE_ALIAS("platform:atmel_spi");