1 // SPDX-License-Identifier: GPL-2.0+
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
12 #include <asm/cpm_8xx.h>
13 #include <linux/compiler.h>
15 DECLARE_GLOBAL_DATA_PTR;
17 #if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */
19 #define PROFF_SMC PROFF_SMC1
20 #define CPM_CR_CH_SMC CPM_CR_CH_SMC1
23 #elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */
25 #define PROFF_SMC PROFF_SMC2
26 #define CPM_CR_CH_SMC CPM_CR_CH_SMC2
29 #endif /* CONFIG_8xx_CONS_SMCx */
32 cbd_t rxbd; /* Rx BD */
33 cbd_t txbd; /* Tx BD */
34 uint rxindex; /* index for next character to read */
35 uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
36 uchar txbuf; /* tx buffers */
39 static void serial_setdivisor(cpm8xx_t __iomem *cp, int baudrate)
41 int divisor = (gd->cpu_clk + 8 * baudrate) / 16 / baudrate;
43 if (divisor / 16 > 0x1000) {
44 /* bad divisor, assume 50MHz clock and 9600 baud */
45 divisor = (50 * 1000 * 1000 + 8 * 9600) / 16 / 9600;
48 divisor /= CONFIG_SYS_BRGCLK_PRESCALE;
50 if (divisor <= 0x1000)
51 out_be32(&cp->cp_brgc1, ((divisor - 1) << 1) | CPM_BRG_EN);
53 out_be32(&cp->cp_brgc1, ((divisor / 16 - 1) << 1) | CPM_BRG_EN |
58 * Minimal serial functions needed to use one of the SMC ports
59 * as serial console interface.
62 static int serial_mpc8xx_setbrg(struct udevice *dev, int baudrate)
64 immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
65 cpm8xx_t __iomem *cp = &(im->im_cpm);
67 /* Set up the baud rate generator.
68 * See 8xx_io/commproc.c for details.
73 out_be32(&cp->cp_simode, 0);
75 serial_setdivisor(cp, baudrate);
80 static int serial_mpc8xx_probe(struct udevice *dev)
82 immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
84 smc_uart_t __iomem *up;
85 cpm8xx_t __iomem *cp = &(im->im_cpm);
86 struct serialbuffer __iomem *rtx;
88 /* initialize pointers to SMC */
90 sp = cp->cp_smc + SMC_INDEX;
91 up = (smc_uart_t __iomem *)&cp->cp_dparam[PROFF_SMC];
92 /* Disable relocation */
93 out_be16(&up->smc_rpbase, 0);
95 /* Disable transmitter/receiver. */
96 clrbits_be16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
99 out_be32(&im->im_siu_conf.sc_sdcr, 1);
101 /* clear error conditions */
102 out_8(&im->im_sdma.sdma_sdsr, CONFIG_SYS_SDSR);
104 /* clear SDMA interrupt mask */
105 out_8(&im->im_sdma.sdma_sdmr, CONFIG_SYS_SDMR);
107 /* Use Port B for SMCx instead of other functions. */
108 setbits_be32(&cp->cp_pbpar, IOPINS);
109 clrbits_be32(&cp->cp_pbdir, IOPINS);
110 clrbits_be16(&cp->cp_pbodr, IOPINS);
112 /* Set the physical address of the host memory buffers in
113 * the buffer descriptors.
115 rtx = (struct serialbuffer __iomem *)&cp->cp_dpmem[CPM_SERIAL_BASE];
116 /* Allocate space for two buffer descriptors in the DP ram.
117 * For now, this address seems OK, but it may have to
118 * change with newer versions of the firmware.
119 * damm: allocating space after the two buffers for rx/tx data
122 out_be32(&rtx->rxbd.cbd_bufaddr, (__force uint)&rtx->rxbuf);
123 out_be16(&rtx->rxbd.cbd_sc, 0);
125 out_be32(&rtx->txbd.cbd_bufaddr, (__force uint)&rtx->txbuf);
126 out_be16(&rtx->txbd.cbd_sc, 0);
128 /* Set up the uart parameters in the parameter ram. */
129 out_be16(&up->smc_rbase, CPM_SERIAL_BASE);
130 out_be16(&up->smc_tbase, CPM_SERIAL_BASE + sizeof(cbd_t));
131 out_8(&up->smc_rfcr, SMC_EB);
132 out_8(&up->smc_tfcr, SMC_EB);
134 /* Set UART mode, 8 bit, no parity, one stop.
135 * Enable receive and transmit.
137 out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART);
139 /* Mask all interrupts and remove anything pending.
141 out_8(&sp->smc_smcm, 0);
142 out_8(&sp->smc_smce, 0xff);
144 /* Set up the baud rate generator */
145 serial_mpc8xx_setbrg(dev, gd->baudrate);
147 /* Make the first buffer the only buffer. */
148 setbits_be16(&rtx->txbd.cbd_sc, BD_SC_WRAP);
149 setbits_be16(&rtx->rxbd.cbd_sc, BD_SC_EMPTY | BD_SC_WRAP);
151 /* single/multi character receive. */
152 out_be16(&up->smc_mrblr, CONFIG_SYS_SMC_RXBUFLEN);
153 out_be16(&up->smc_maxidl, CONFIG_SYS_MAXIDLE);
154 out_be32(&rtx->rxindex, 0);
156 /* Initialize Tx/Rx parameters. */
157 while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) /* wait if cp is busy */
160 out_be16(&cp->cp_cpcr,
161 mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG);
163 while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) /* wait if cp is busy */
166 /* Enable transmitter/receiver. */
167 setbits_be16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
172 static int serial_mpc8xx_putc(struct udevice *dev, const char c)
174 immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
175 cpm8xx_t __iomem *cpmp = &(im->im_cpm);
176 struct serialbuffer __iomem *rtx;
179 serial_mpc8xx_putc(dev, '\r');
181 rtx = (struct serialbuffer __iomem *)&cpmp->cp_dpmem[CPM_SERIAL_BASE];
183 /* Wait for last character to go. */
184 out_8(&rtx->txbuf, c);
185 out_be16(&rtx->txbd.cbd_datlen, 1);
186 setbits_be16(&rtx->txbd.cbd_sc, BD_SC_READY);
188 while (in_be16(&rtx->txbd.cbd_sc) & BD_SC_READY)
194 static int serial_mpc8xx_getc(struct udevice *dev)
196 immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
197 cpm8xx_t __iomem *cpmp = &(im->im_cpm);
198 struct serialbuffer __iomem *rtx;
202 rtx = (struct serialbuffer __iomem *)&cpmp->cp_dpmem[CPM_SERIAL_BASE];
204 /* Wait for character to show up. */
205 while (in_be16(&rtx->rxbd.cbd_sc) & BD_SC_EMPTY)
208 /* the characters are read one by one,
209 * use the rxindex to know the next char to deliver
211 rxindex = in_be32(&rtx->rxindex);
212 c = in_8(rtx->rxbuf + rxindex);
215 /* check if all char are readout, then make prepare for next receive */
216 if (rxindex >= in_be16(&rtx->rxbd.cbd_datlen)) {
218 setbits_be16(&rtx->rxbd.cbd_sc, BD_SC_EMPTY);
220 out_be32(&rtx->rxindex, rxindex);
224 static int serial_mpc8xx_pending(struct udevice *dev, bool input)
226 immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
227 cpm8xx_t __iomem *cpmp = &(im->im_cpm);
228 struct serialbuffer __iomem *rtx;
233 rtx = (struct serialbuffer __iomem *)&cpmp->cp_dpmem[CPM_SERIAL_BASE];
235 return !(in_be16(&rtx->rxbd.cbd_sc) & BD_SC_EMPTY);
238 static const struct dm_serial_ops serial_mpc8xx_ops = {
239 .putc = serial_mpc8xx_putc,
240 .pending = serial_mpc8xx_pending,
241 .getc = serial_mpc8xx_getc,
242 .setbrg = serial_mpc8xx_setbrg,
245 static const struct udevice_id serial_mpc8xx_ids[] = {
246 { .compatible = "fsl,pq1-smc" },
250 U_BOOT_DRIVER(serial_mpc8xx) = {
251 .name = "serial_mpc8xx",
253 .of_match = serial_mpc8xx_ids,
254 .probe = serial_mpc8xx_probe,
255 .ops = &serial_mpc8xx_ops,
256 .flags = DM_FLAG_PRE_RELOC,