2 * Copyright (c) 2009, Microsoft Corporation.
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * You should have received a copy of the GNU General Public License along with
14 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
15 * Place - Suite 330, Boston, MA 02111-1307 USA.
18 * Haiyang Zhang <haiyangz@microsoft.com>
19 * Hank Janssen <hjanssen@microsoft.com>
20 * K. Y. Srinivasan <kys@microsoft.com>
23 #include <linux/kernel.h>
24 #include <linux/wait.h>
25 #include <linux/sched.h>
26 #include <linux/completion.h>
27 #include <linux/string.h>
29 #include <linux/delay.h>
30 #include <linux/init.h>
31 #include <linux/slab.h>
32 #include <linux/module.h>
33 #include <linux/device.h>
34 #include <linux/hyperv.h>
35 #include <linux/mempool.h>
36 #include <linux/blkdev.h>
37 #include <scsi/scsi.h>
38 #include <scsi/scsi_cmnd.h>
39 #include <scsi/scsi_host.h>
40 #include <scsi/scsi_device.h>
41 #include <scsi/scsi_tcq.h>
42 #include <scsi/scsi_eh.h>
43 #include <scsi/scsi_devinfo.h>
44 #include <scsi/scsi_dbg.h>
47 * All wire protocol details (storage protocol between the guest and the host)
48 * are consolidated here.
50 * Begin protocol definitions.
56 * V1 RC < 2008/1/31: 1.0
57 * V1 RC > 2008/1/31: 2.0
63 #define VMSTOR_WIN7_MAJOR 4
64 #define VMSTOR_WIN7_MINOR 2
66 #define VMSTOR_WIN8_MAJOR 5
67 #define VMSTOR_WIN8_MINOR 1
70 /* Packet structure describing virtual storage requests. */
71 enum vstor_packet_operation {
72 VSTOR_OPERATION_COMPLETE_IO = 1,
73 VSTOR_OPERATION_REMOVE_DEVICE = 2,
74 VSTOR_OPERATION_EXECUTE_SRB = 3,
75 VSTOR_OPERATION_RESET_LUN = 4,
76 VSTOR_OPERATION_RESET_ADAPTER = 5,
77 VSTOR_OPERATION_RESET_BUS = 6,
78 VSTOR_OPERATION_BEGIN_INITIALIZATION = 7,
79 VSTOR_OPERATION_END_INITIALIZATION = 8,
80 VSTOR_OPERATION_QUERY_PROTOCOL_VERSION = 9,
81 VSTOR_OPERATION_QUERY_PROPERTIES = 10,
82 VSTOR_OPERATION_ENUMERATE_BUS = 11,
83 VSTOR_OPERATION_FCHBA_DATA = 12,
84 VSTOR_OPERATION_CREATE_SUB_CHANNELS = 13,
85 VSTOR_OPERATION_MAXIMUM = 13
89 * WWN packet for Fibre Channel HBA
92 struct hv_fc_wwn_packet {
96 u8 primary_port_wwn[8];
97 u8 primary_node_wwn[8];
98 u8 secondary_port_wwn[8];
99 u8 secondary_node_wwn[8];
108 #define SRB_FLAGS_QUEUE_ACTION_ENABLE 0x00000002
109 #define SRB_FLAGS_DISABLE_DISCONNECT 0x00000004
110 #define SRB_FLAGS_DISABLE_SYNCH_TRANSFER 0x00000008
111 #define SRB_FLAGS_BYPASS_FROZEN_QUEUE 0x00000010
112 #define SRB_FLAGS_DISABLE_AUTOSENSE 0x00000020
113 #define SRB_FLAGS_DATA_IN 0x00000040
114 #define SRB_FLAGS_DATA_OUT 0x00000080
115 #define SRB_FLAGS_NO_DATA_TRANSFER 0x00000000
116 #define SRB_FLAGS_UNSPECIFIED_DIRECTION (SRB_FLAGS_DATA_IN | SRB_FLAGS_DATA_OUT)
117 #define SRB_FLAGS_NO_QUEUE_FREEZE 0x00000100
118 #define SRB_FLAGS_ADAPTER_CACHE_ENABLE 0x00000200
119 #define SRB_FLAGS_FREE_SENSE_BUFFER 0x00000400
122 * This flag indicates the request is part of the workflow for processing a D3.
124 #define SRB_FLAGS_D3_PROCESSING 0x00000800
125 #define SRB_FLAGS_IS_ACTIVE 0x00010000
126 #define SRB_FLAGS_ALLOCATED_FROM_ZONE 0x00020000
127 #define SRB_FLAGS_SGLIST_FROM_POOL 0x00040000
128 #define SRB_FLAGS_BYPASS_LOCKED_QUEUE 0x00080000
129 #define SRB_FLAGS_NO_KEEP_AWAKE 0x00100000
130 #define SRB_FLAGS_PORT_DRIVER_ALLOCSENSE 0x00200000
131 #define SRB_FLAGS_PORT_DRIVER_SENSEHASPORT 0x00400000
132 #define SRB_FLAGS_DONT_START_NEXT_PACKET 0x00800000
133 #define SRB_FLAGS_PORT_DRIVER_RESERVED 0x0F000000
134 #define SRB_FLAGS_CLASS_DRIVER_RESERVED 0xF0000000
138 * Platform neutral description of a scsi request -
139 * this remains the same across the write regardless of 32/64 bit
140 * note: it's patterned off the SCSI_PASS_THROUGH structure
142 #define STORVSC_MAX_CMD_LEN 0x10
144 #define POST_WIN7_STORVSC_SENSE_BUFFER_SIZE 0x14
145 #define PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE 0x12
147 #define STORVSC_SENSE_BUFFER_SIZE 0x14
148 #define STORVSC_MAX_BUF_LEN_WITH_PADDING 0x14
151 * Sense buffer size changed in win8; have a run-time
152 * variable to track the size we should use.
154 static int sense_buffer_size;
157 * The size of the vmscsi_request has changed in win8. The
158 * additional size is because of new elements added to the
159 * structure. These elements are valid only when we are talking
161 * Track the correction to size we need to apply.
164 static int vmscsi_size_delta;
165 static int vmstor_current_major;
166 static int vmstor_current_minor;
168 struct vmscsi_win8_extension {
170 * The following were added in Windows 8
180 struct vmscsi_request {
191 u8 sense_info_length;
195 u32 data_transfer_length;
198 u8 cdb[STORVSC_MAX_CMD_LEN];
199 u8 sense_data[STORVSC_SENSE_BUFFER_SIZE];
200 u8 reserved_array[STORVSC_MAX_BUF_LEN_WITH_PADDING];
203 * The following was added in win8.
205 struct vmscsi_win8_extension win8_extension;
207 } __attribute((packed));
211 * This structure is sent during the intialization phase to get the different
212 * properties of the channel.
215 #define STORAGE_CHANNEL_SUPPORTS_MULTI_CHANNEL 0x1
217 struct vmstorage_channel_properties {
223 u32 max_transfer_bytes;
228 /* This structure is sent during the storage protocol negotiations. */
229 struct vmstorage_protocol_version {
230 /* Major (MSW) and minor (LSW) version numbers. */
234 * Revision number is auto-incremented whenever this file is changed
235 * (See FILL_VMSTOR_REVISION macro above). Mismatch does not
236 * definitely indicate incompatibility--but it does indicate mismatched
238 * This is only used on the windows side. Just set it to 0.
243 /* Channel Property Flags */
244 #define STORAGE_CHANNEL_REMOVABLE_FLAG 0x1
245 #define STORAGE_CHANNEL_EMULATED_IDE_FLAG 0x2
247 struct vstor_packet {
248 /* Requested operation type */
249 enum vstor_packet_operation operation;
251 /* Flags - see below for values */
254 /* Status of the request returned from the server side. */
257 /* Data payload area */
260 * Structure used to forward SCSI commands from the
261 * client to the server.
263 struct vmscsi_request vm_srb;
265 /* Structure used to query channel properties. */
266 struct vmstorage_channel_properties storage_channel_properties;
268 /* Used during version negotiations. */
269 struct vmstorage_protocol_version version;
271 /* Fibre channel address packet */
272 struct hv_fc_wwn_packet wwn_packet;
274 /* Number of sub-channels to create */
275 u16 sub_channel_count;
277 /* This will be the maximum of the union members */
285 * This flag indicates that the server should send back a completion for this
289 #define REQUEST_COMPLETION_FLAG 0x1
291 /* Matches Windows-end */
292 enum storvsc_request_type {
299 * SRB status codes and masks; a subset of the codes used here.
302 #define SRB_STATUS_AUTOSENSE_VALID 0x80
303 #define SRB_STATUS_INVALID_LUN 0x20
304 #define SRB_STATUS_SUCCESS 0x01
305 #define SRB_STATUS_ABORTED 0x02
306 #define SRB_STATUS_ERROR 0x04
309 * This is the end of Protocol specific defines.
314 * We setup a mempool to allocate request structures for this driver
315 * on a per-lun basis. The following define specifies the number of
316 * elements in the pool.
319 #define STORVSC_MIN_BUF_NR 64
320 static int storvsc_ringbuffer_size = (20 * PAGE_SIZE);
322 module_param(storvsc_ringbuffer_size, int, S_IRUGO);
323 MODULE_PARM_DESC(storvsc_ringbuffer_size, "Ring buffer size (bytes)");
326 * Timeout in seconds for all devices managed by this driver.
328 static int storvsc_timeout = 180;
330 #define STORVSC_MAX_IO_REQUESTS 200
332 static void storvsc_on_channel_callback(void *context);
334 #define STORVSC_MAX_LUNS_PER_TARGET 255
335 #define STORVSC_MAX_TARGETS 2
336 #define STORVSC_MAX_CHANNELS 8
338 #define STORVSC_FC_MAX_LUNS_PER_TARGET 255
339 #define STORVSC_FC_MAX_TARGETS 128
340 #define STORVSC_FC_MAX_CHANNELS 8
342 #define STORVSC_IDE_MAX_LUNS_PER_TARGET 64
343 #define STORVSC_IDE_MAX_TARGETS 1
344 #define STORVSC_IDE_MAX_CHANNELS 1
346 struct storvsc_cmd_request {
347 struct list_head entry;
348 struct scsi_cmnd *cmd;
350 unsigned int bounce_sgl_count;
351 struct scatterlist *bounce_sgl;
353 struct hv_device *device;
355 /* Synchronize the request/response if needed */
356 struct completion wait_event;
358 unsigned char *sense_buffer;
359 struct hv_multipage_buffer data_buffer;
360 struct vstor_packet vstor_packet;
364 /* A storvsc device is a device object that contains a vmbus channel */
365 struct storvsc_device {
366 struct hv_device *device;
370 bool open_sub_channel;
371 atomic_t num_outstanding_req;
372 struct Scsi_Host *host;
374 wait_queue_head_t waiting_to_drain;
377 * Each unique Port/Path/Target represents 1 channel ie scsi
378 * controller. In reality, the pathid, targetid is always 0
379 * and the port is set by us
381 unsigned int port_number;
382 unsigned char path_id;
383 unsigned char target_id;
385 /* Used for vsc/vsp channel reset process */
386 struct storvsc_cmd_request init_request;
387 struct storvsc_cmd_request reset_request;
390 struct stor_mem_pools {
391 struct kmem_cache *request_pool;
392 mempool_t *request_mempool;
395 struct hv_host_device {
396 struct hv_device *dev;
399 unsigned char target;
402 struct storvsc_scan_work {
403 struct work_struct work;
404 struct Scsi_Host *host;
408 static void storvsc_device_scan(struct work_struct *work)
410 struct storvsc_scan_work *wrk;
412 struct scsi_device *sdev;
414 wrk = container_of(work, struct storvsc_scan_work, work);
417 sdev = scsi_device_lookup(wrk->host, 0, 0, lun);
420 scsi_rescan_device(&sdev->sdev_gendev);
421 scsi_device_put(sdev);
427 static void storvsc_bus_scan(struct work_struct *work)
429 struct storvsc_scan_work *wrk;
432 wrk = container_of(work, struct storvsc_scan_work, work);
433 for (id = 0; id < wrk->host->max_id; ++id) {
434 if (wrk->host->reverse_ordering)
435 order_id = wrk->host->max_id - id - 1;
439 scsi_scan_target(&wrk->host->shost_gendev, 0,
440 order_id, SCAN_WILD_CARD, 1);
445 static void storvsc_remove_lun(struct work_struct *work)
447 struct storvsc_scan_work *wrk;
448 struct scsi_device *sdev;
450 wrk = container_of(work, struct storvsc_scan_work, work);
451 if (!scsi_host_get(wrk->host))
454 sdev = scsi_device_lookup(wrk->host, 0, 0, wrk->lun);
457 scsi_remove_device(sdev);
458 scsi_device_put(sdev);
460 scsi_host_put(wrk->host);
467 * Major/minor macros. Minor version is in LSB, meaning that earlier flat
468 * version numbers will be interpreted as "0.x" (i.e., 1 becomes 0.1).
471 static inline u16 storvsc_get_version(u8 major, u8 minor)
475 version = ((major << 8) | minor);
480 * We can get incoming messages from the host that are not in response to
481 * messages that we have sent out. An example of this would be messages
482 * received by the guest to notify dynamic addition/removal of LUNs. To
483 * deal with potential race conditions where the driver may be in the
484 * midst of being unloaded when we might receive an unsolicited message
485 * from the host, we have implemented a mechanism to gurantee sequential
488 * 1) Once the device is marked as being destroyed, we will fail all
490 * 2) We permit incoming messages when the device is being destroyed,
491 * only to properly account for messages already sent out.
494 static inline struct storvsc_device *get_out_stor_device(
495 struct hv_device *device)
497 struct storvsc_device *stor_device;
499 stor_device = hv_get_drvdata(device);
501 if (stor_device && stor_device->destroy)
508 static inline void storvsc_wait_to_drain(struct storvsc_device *dev)
510 dev->drain_notify = true;
511 wait_event(dev->waiting_to_drain,
512 atomic_read(&dev->num_outstanding_req) == 0);
513 dev->drain_notify = false;
516 static inline struct storvsc_device *get_in_stor_device(
517 struct hv_device *device)
519 struct storvsc_device *stor_device;
521 stor_device = hv_get_drvdata(device);
527 * If the device is being destroyed; allow incoming
528 * traffic only to cleanup outstanding requests.
531 if (stor_device->destroy &&
532 (atomic_read(&stor_device->num_outstanding_req) == 0))
540 static void destroy_bounce_buffer(struct scatterlist *sgl,
541 unsigned int sg_count)
544 struct page *page_buf;
546 for (i = 0; i < sg_count; i++) {
547 page_buf = sg_page((&sgl[i]));
548 if (page_buf != NULL)
549 __free_page(page_buf);
555 static int do_bounce_buffer(struct scatterlist *sgl, unsigned int sg_count)
559 /* No need to check */
563 /* We have at least 2 sg entries */
564 for (i = 0; i < sg_count; i++) {
566 /* make sure 1st one does not have hole */
567 if (sgl[i].offset + sgl[i].length != PAGE_SIZE)
569 } else if (i == sg_count - 1) {
570 /* make sure last one does not have hole */
571 if (sgl[i].offset != 0)
574 /* make sure no hole in the middle */
575 if (sgl[i].length != PAGE_SIZE || sgl[i].offset != 0)
582 static struct scatterlist *create_bounce_buffer(struct scatterlist *sgl,
583 unsigned int sg_count,
589 struct scatterlist *bounce_sgl;
590 struct page *page_buf;
591 unsigned int buf_len = ((write == WRITE_TYPE) ? 0 : PAGE_SIZE);
593 num_pages = ALIGN(len, PAGE_SIZE) >> PAGE_SHIFT;
595 bounce_sgl = kcalloc(num_pages, sizeof(struct scatterlist), GFP_ATOMIC);
599 sg_init_table(bounce_sgl, num_pages);
600 for (i = 0; i < num_pages; i++) {
601 page_buf = alloc_page(GFP_ATOMIC);
604 sg_set_page(&bounce_sgl[i], page_buf, buf_len, 0);
610 destroy_bounce_buffer(bounce_sgl, num_pages);
614 /* Disgusting wrapper functions */
615 static inline unsigned long sg_kmap_atomic(struct scatterlist *sgl, int idx)
617 void *addr = kmap_atomic(sg_page(sgl + idx));
618 return (unsigned long)addr;
621 static inline void sg_kunmap_atomic(unsigned long addr)
623 kunmap_atomic((void *)addr);
627 /* Assume the original sgl has enough room */
628 static unsigned int copy_from_bounce_buffer(struct scatterlist *orig_sgl,
629 struct scatterlist *bounce_sgl,
630 unsigned int orig_sgl_count,
631 unsigned int bounce_sgl_count)
635 unsigned long src, dest;
636 unsigned int srclen, destlen, copylen;
637 unsigned int total_copied = 0;
638 unsigned long bounce_addr = 0;
639 unsigned long dest_addr = 0;
642 local_irq_save(flags);
644 for (i = 0; i < orig_sgl_count; i++) {
645 dest_addr = sg_kmap_atomic(orig_sgl,i) + orig_sgl[i].offset;
647 destlen = orig_sgl[i].length;
649 if (bounce_addr == 0)
650 bounce_addr = sg_kmap_atomic(bounce_sgl,j);
653 src = bounce_addr + bounce_sgl[j].offset;
654 srclen = bounce_sgl[j].length - bounce_sgl[j].offset;
656 copylen = min(srclen, destlen);
657 memcpy((void *)dest, (void *)src, copylen);
659 total_copied += copylen;
660 bounce_sgl[j].offset += copylen;
664 if (bounce_sgl[j].offset == bounce_sgl[j].length) {
666 sg_kunmap_atomic(bounce_addr);
670 * It is possible that the number of elements
671 * in the bounce buffer may not be equal to
672 * the number of elements in the original
673 * scatter list. Handle this correctly.
676 if (j == bounce_sgl_count) {
678 * We are done; cleanup and return.
680 sg_kunmap_atomic(dest_addr - orig_sgl[i].offset);
681 local_irq_restore(flags);
685 /* if we need to use another bounce buffer */
686 if (destlen || i != orig_sgl_count - 1)
687 bounce_addr = sg_kmap_atomic(bounce_sgl,j);
688 } else if (destlen == 0 && i == orig_sgl_count - 1) {
689 /* unmap the last bounce that is < PAGE_SIZE */
690 sg_kunmap_atomic(bounce_addr);
694 sg_kunmap_atomic(dest_addr - orig_sgl[i].offset);
697 local_irq_restore(flags);
702 /* Assume the bounce_sgl has enough room ie using the create_bounce_buffer() */
703 static unsigned int copy_to_bounce_buffer(struct scatterlist *orig_sgl,
704 struct scatterlist *bounce_sgl,
705 unsigned int orig_sgl_count)
709 unsigned long src, dest;
710 unsigned int srclen, destlen, copylen;
711 unsigned int total_copied = 0;
712 unsigned long bounce_addr = 0;
713 unsigned long src_addr = 0;
716 local_irq_save(flags);
718 for (i = 0; i < orig_sgl_count; i++) {
719 src_addr = sg_kmap_atomic(orig_sgl,i) + orig_sgl[i].offset;
721 srclen = orig_sgl[i].length;
723 if (bounce_addr == 0)
724 bounce_addr = sg_kmap_atomic(bounce_sgl,j);
727 /* assume bounce offset always == 0 */
728 dest = bounce_addr + bounce_sgl[j].length;
729 destlen = PAGE_SIZE - bounce_sgl[j].length;
731 copylen = min(srclen, destlen);
732 memcpy((void *)dest, (void *)src, copylen);
734 total_copied += copylen;
735 bounce_sgl[j].length += copylen;
739 if (bounce_sgl[j].length == PAGE_SIZE) {
740 /* full..move to next entry */
741 sg_kunmap_atomic(bounce_addr);
744 /* if we need to use another bounce buffer */
745 if (srclen || i != orig_sgl_count - 1)
746 bounce_addr = sg_kmap_atomic(bounce_sgl,j);
748 } else if (srclen == 0 && i == orig_sgl_count - 1) {
749 /* unmap the last bounce that is < PAGE_SIZE */
750 sg_kunmap_atomic(bounce_addr);
754 sg_kunmap_atomic(src_addr - orig_sgl[i].offset);
757 local_irq_restore(flags);
762 static void handle_sc_creation(struct vmbus_channel *new_sc)
764 struct hv_device *device = new_sc->primary_channel->device_obj;
765 struct storvsc_device *stor_device;
766 struct vmstorage_channel_properties props;
768 stor_device = get_out_stor_device(device);
772 if (stor_device->open_sub_channel == false)
775 memset(&props, 0, sizeof(struct vmstorage_channel_properties));
778 storvsc_ringbuffer_size,
779 storvsc_ringbuffer_size,
781 sizeof(struct vmstorage_channel_properties),
782 storvsc_on_channel_callback, new_sc);
785 static void handle_multichannel_storage(struct hv_device *device, int max_chns)
787 struct storvsc_device *stor_device;
788 int num_cpus = num_online_cpus();
790 struct storvsc_cmd_request *request;
791 struct vstor_packet *vstor_packet;
794 num_sc = ((max_chns > num_cpus) ? num_cpus : max_chns);
795 stor_device = get_out_stor_device(device);
799 request = &stor_device->init_request;
800 vstor_packet = &request->vstor_packet;
802 stor_device->open_sub_channel = true;
804 * Establish a handler for dealing with subchannels.
806 vmbus_set_sc_create_callback(device->channel, handle_sc_creation);
809 * Check to see if sub-channels have already been created. This
810 * can happen when this driver is re-loaded after unloading.
813 if (vmbus_are_subchannels_present(device->channel))
816 stor_device->open_sub_channel = false;
818 * Request the host to create sub-channels.
820 memset(request, 0, sizeof(struct storvsc_cmd_request));
821 init_completion(&request->wait_event);
822 vstor_packet->operation = VSTOR_OPERATION_CREATE_SUB_CHANNELS;
823 vstor_packet->flags = REQUEST_COMPLETION_FLAG;
824 vstor_packet->sub_channel_count = num_sc;
826 ret = vmbus_sendpacket(device->channel, vstor_packet,
827 (sizeof(struct vstor_packet) -
829 (unsigned long)request,
831 VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
836 t = wait_for_completion_timeout(&request->wait_event, 10*HZ);
840 if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
841 vstor_packet->status != 0)
845 * Now that we created the sub-channels, invoke the check; this
846 * may trigger the callback.
848 stor_device->open_sub_channel = true;
849 vmbus_are_subchannels_present(device->channel);
852 static int storvsc_channel_init(struct hv_device *device)
854 struct storvsc_device *stor_device;
855 struct storvsc_cmd_request *request;
856 struct vstor_packet *vstor_packet;
859 bool process_sub_channels = false;
861 stor_device = get_out_stor_device(device);
865 request = &stor_device->init_request;
866 vstor_packet = &request->vstor_packet;
869 * Now, initiate the vsc/vsp initialization protocol on the open
872 memset(request, 0, sizeof(struct storvsc_cmd_request));
873 init_completion(&request->wait_event);
874 vstor_packet->operation = VSTOR_OPERATION_BEGIN_INITIALIZATION;
875 vstor_packet->flags = REQUEST_COMPLETION_FLAG;
877 ret = vmbus_sendpacket(device->channel, vstor_packet,
878 (sizeof(struct vstor_packet) -
880 (unsigned long)request,
882 VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
886 t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
892 if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
893 vstor_packet->status != 0)
897 /* reuse the packet for version range supported */
898 memset(vstor_packet, 0, sizeof(struct vstor_packet));
899 vstor_packet->operation = VSTOR_OPERATION_QUERY_PROTOCOL_VERSION;
900 vstor_packet->flags = REQUEST_COMPLETION_FLAG;
902 vstor_packet->version.major_minor =
903 storvsc_get_version(vmstor_current_major, vmstor_current_minor);
906 * The revision number is only used in Windows; set it to 0.
908 vstor_packet->version.revision = 0;
910 ret = vmbus_sendpacket(device->channel, vstor_packet,
911 (sizeof(struct vstor_packet) -
913 (unsigned long)request,
915 VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
919 t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
925 if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
926 vstor_packet->status != 0)
930 memset(vstor_packet, 0, sizeof(struct vstor_packet));
931 vstor_packet->operation = VSTOR_OPERATION_QUERY_PROPERTIES;
932 vstor_packet->flags = REQUEST_COMPLETION_FLAG;
934 ret = vmbus_sendpacket(device->channel, vstor_packet,
935 (sizeof(struct vstor_packet) -
937 (unsigned long)request,
939 VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
944 t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
950 if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
951 vstor_packet->status != 0)
955 * Check to see if multi-channel support is there.
956 * Hosts that implement protocol version of 5.1 and above
957 * support multi-channel.
959 max_chns = vstor_packet->storage_channel_properties.max_channel_cnt;
960 if ((vmbus_proto_version != VERSION_WIN7) &&
961 (vmbus_proto_version != VERSION_WS2008)) {
962 if (vstor_packet->storage_channel_properties.flags &
963 STORAGE_CHANNEL_SUPPORTS_MULTI_CHANNEL)
964 process_sub_channels = true;
967 memset(vstor_packet, 0, sizeof(struct vstor_packet));
968 vstor_packet->operation = VSTOR_OPERATION_END_INITIALIZATION;
969 vstor_packet->flags = REQUEST_COMPLETION_FLAG;
971 ret = vmbus_sendpacket(device->channel, vstor_packet,
972 (sizeof(struct vstor_packet) -
974 (unsigned long)request,
976 VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
981 t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
987 if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
988 vstor_packet->status != 0)
991 if (process_sub_channels)
992 handle_multichannel_storage(device, max_chns);
999 static void storvsc_handle_error(struct vmscsi_request *vm_srb,
1000 struct scsi_cmnd *scmnd,
1001 struct Scsi_Host *host,
1004 struct storvsc_scan_work *wrk;
1005 void (*process_err_fn)(struct work_struct *work);
1006 bool do_work = false;
1008 switch (vm_srb->srb_status) {
1009 case SRB_STATUS_ERROR:
1011 * If there is an error; offline the device since all
1012 * error recovery strategies would have already been
1013 * deployed on the host side. However, if the command
1014 * were a pass-through command deal with it appropriately.
1016 switch (scmnd->cmnd[0]) {
1019 set_host_byte(scmnd, DID_PASSTHROUGH);
1022 * On Some Windows hosts TEST_UNIT_READY command can return
1023 * SRB_STATUS_ERROR, let the upper level code deal with it
1024 * based on the sense information.
1026 case TEST_UNIT_READY:
1029 set_host_byte(scmnd, DID_TARGET_FAILURE);
1032 case SRB_STATUS_INVALID_LUN:
1034 process_err_fn = storvsc_remove_lun;
1036 case (SRB_STATUS_ABORTED | SRB_STATUS_AUTOSENSE_VALID):
1037 if ((asc == 0x2a) && (ascq == 0x9)) {
1039 process_err_fn = storvsc_device_scan;
1041 * Retry the I/O that trigerred this.
1043 set_host_byte(scmnd, DID_REQUEUE);
1052 * We need to schedule work to process this error; schedule it.
1054 wrk = kmalloc(sizeof(struct storvsc_scan_work), GFP_ATOMIC);
1056 set_host_byte(scmnd, DID_TARGET_FAILURE);
1061 wrk->lun = vm_srb->lun;
1062 INIT_WORK(&wrk->work, process_err_fn);
1063 schedule_work(&wrk->work);
1067 static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
1069 struct scsi_cmnd *scmnd = cmd_request->cmd;
1070 struct hv_host_device *host_dev = shost_priv(scmnd->device->host);
1071 void (*scsi_done_fn)(struct scsi_cmnd *);
1072 struct scsi_sense_hdr sense_hdr;
1073 struct vmscsi_request *vm_srb;
1074 struct stor_mem_pools *memp = scmnd->device->hostdata;
1075 struct Scsi_Host *host;
1076 struct storvsc_device *stor_dev;
1077 struct hv_device *dev = host_dev->dev;
1079 stor_dev = get_in_stor_device(dev);
1080 host = stor_dev->host;
1082 vm_srb = &cmd_request->vstor_packet.vm_srb;
1083 if (cmd_request->bounce_sgl_count) {
1084 if (vm_srb->data_in == READ_TYPE)
1085 copy_from_bounce_buffer(scsi_sglist(scmnd),
1086 cmd_request->bounce_sgl,
1087 scsi_sg_count(scmnd),
1088 cmd_request->bounce_sgl_count);
1089 destroy_bounce_buffer(cmd_request->bounce_sgl,
1090 cmd_request->bounce_sgl_count);
1093 scmnd->result = vm_srb->scsi_status;
1095 if (scmnd->result) {
1096 if (scsi_normalize_sense(scmnd->sense_buffer,
1097 SCSI_SENSE_BUFFERSIZE, &sense_hdr))
1098 scsi_print_sense_hdr("storvsc", &sense_hdr);
1101 if (vm_srb->srb_status != SRB_STATUS_SUCCESS)
1102 storvsc_handle_error(vm_srb, scmnd, host, sense_hdr.asc,
1105 scsi_set_resid(scmnd,
1106 cmd_request->data_buffer.len -
1107 vm_srb->data_transfer_length);
1109 scsi_done_fn = scmnd->scsi_done;
1111 scmnd->host_scribble = NULL;
1112 scmnd->scsi_done = NULL;
1114 scsi_done_fn(scmnd);
1116 mempool_free(cmd_request, memp->request_mempool);
1119 static void storvsc_on_io_completion(struct hv_device *device,
1120 struct vstor_packet *vstor_packet,
1121 struct storvsc_cmd_request *request)
1123 struct storvsc_device *stor_device;
1124 struct vstor_packet *stor_pkt;
1126 stor_device = hv_get_drvdata(device);
1127 stor_pkt = &request->vstor_packet;
1130 * The current SCSI handling on the host side does
1131 * not correctly handle:
1132 * INQUIRY command with page code parameter set to 0x80
1133 * MODE_SENSE command with cmd[2] == 0x1c
1135 * Setup srb and scsi status so this won't be fatal.
1136 * We do this so we can distinguish truly fatal failues
1137 * (srb status == 0x4) and off-line the device in that case.
1140 if ((stor_pkt->vm_srb.cdb[0] == INQUIRY) ||
1141 (stor_pkt->vm_srb.cdb[0] == MODE_SENSE)) {
1142 vstor_packet->vm_srb.scsi_status = 0;
1143 vstor_packet->vm_srb.srb_status = SRB_STATUS_SUCCESS;
1147 /* Copy over the status...etc */
1148 stor_pkt->vm_srb.scsi_status = vstor_packet->vm_srb.scsi_status;
1149 stor_pkt->vm_srb.srb_status = vstor_packet->vm_srb.srb_status;
1150 stor_pkt->vm_srb.sense_info_length =
1151 vstor_packet->vm_srb.sense_info_length;
1153 if (vstor_packet->vm_srb.scsi_status != 0 ||
1154 vstor_packet->vm_srb.srb_status != SRB_STATUS_SUCCESS){
1155 dev_warn(&device->device,
1156 "cmd 0x%x scsi status 0x%x srb status 0x%x\n",
1157 stor_pkt->vm_srb.cdb[0],
1158 vstor_packet->vm_srb.scsi_status,
1159 vstor_packet->vm_srb.srb_status);
1162 if ((vstor_packet->vm_srb.scsi_status & 0xFF) == 0x02) {
1163 /* CHECK_CONDITION */
1164 if (vstor_packet->vm_srb.srb_status &
1165 SRB_STATUS_AUTOSENSE_VALID) {
1166 /* autosense data available */
1167 dev_warn(&device->device,
1168 "stor pkt %p autosense data valid - len %d\n",
1170 vstor_packet->vm_srb.sense_info_length);
1172 memcpy(request->sense_buffer,
1173 vstor_packet->vm_srb.sense_data,
1174 vstor_packet->vm_srb.sense_info_length);
1179 stor_pkt->vm_srb.data_transfer_length =
1180 vstor_packet->vm_srb.data_transfer_length;
1182 storvsc_command_completion(request);
1184 if (atomic_dec_and_test(&stor_device->num_outstanding_req) &&
1185 stor_device->drain_notify)
1186 wake_up(&stor_device->waiting_to_drain);
1191 static void storvsc_on_receive(struct hv_device *device,
1192 struct vstor_packet *vstor_packet,
1193 struct storvsc_cmd_request *request)
1195 struct storvsc_scan_work *work;
1196 struct storvsc_device *stor_device;
1198 switch (vstor_packet->operation) {
1199 case VSTOR_OPERATION_COMPLETE_IO:
1200 storvsc_on_io_completion(device, vstor_packet, request);
1203 case VSTOR_OPERATION_REMOVE_DEVICE:
1204 case VSTOR_OPERATION_ENUMERATE_BUS:
1205 stor_device = get_in_stor_device(device);
1206 work = kmalloc(sizeof(struct storvsc_scan_work), GFP_ATOMIC);
1210 INIT_WORK(&work->work, storvsc_bus_scan);
1211 work->host = stor_device->host;
1212 schedule_work(&work->work);
1220 static void storvsc_on_channel_callback(void *context)
1222 struct vmbus_channel *channel = (struct vmbus_channel *)context;
1223 struct hv_device *device;
1224 struct storvsc_device *stor_device;
1227 unsigned char packet[ALIGN(sizeof(struct vstor_packet), 8)];
1228 struct storvsc_cmd_request *request;
1231 if (channel->primary_channel != NULL)
1232 device = channel->primary_channel->device_obj;
1234 device = channel->device_obj;
1236 stor_device = get_in_stor_device(device);
1241 ret = vmbus_recvpacket(channel, packet,
1242 ALIGN((sizeof(struct vstor_packet) -
1243 vmscsi_size_delta), 8),
1244 &bytes_recvd, &request_id);
1245 if (ret == 0 && bytes_recvd > 0) {
1247 request = (struct storvsc_cmd_request *)
1248 (unsigned long)request_id;
1250 if ((request == &stor_device->init_request) ||
1251 (request == &stor_device->reset_request)) {
1253 memcpy(&request->vstor_packet, packet,
1254 (sizeof(struct vstor_packet) -
1255 vmscsi_size_delta));
1256 complete(&request->wait_event);
1258 storvsc_on_receive(device,
1259 (struct vstor_packet *)packet,
1270 static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)
1272 struct vmstorage_channel_properties props;
1275 memset(&props, 0, sizeof(struct vmstorage_channel_properties));
1277 ret = vmbus_open(device->channel,
1281 sizeof(struct vmstorage_channel_properties),
1282 storvsc_on_channel_callback, device->channel);
1287 ret = storvsc_channel_init(device);
1292 static int storvsc_dev_remove(struct hv_device *device)
1294 struct storvsc_device *stor_device;
1295 unsigned long flags;
1297 stor_device = hv_get_drvdata(device);
1299 spin_lock_irqsave(&device->channel->inbound_lock, flags);
1300 stor_device->destroy = true;
1301 spin_unlock_irqrestore(&device->channel->inbound_lock, flags);
1304 * At this point, all outbound traffic should be disable. We
1305 * only allow inbound traffic (responses) to proceed so that
1306 * outstanding requests can be completed.
1309 storvsc_wait_to_drain(stor_device);
1312 * Since we have already drained, we don't need to busy wait
1313 * as was done in final_release_stor_device()
1314 * Note that we cannot set the ext pointer to NULL until
1315 * we have drained - to drain the outgoing packets, we need to
1316 * allow incoming packets.
1318 spin_lock_irqsave(&device->channel->inbound_lock, flags);
1319 hv_set_drvdata(device, NULL);
1320 spin_unlock_irqrestore(&device->channel->inbound_lock, flags);
1322 /* Close the channel */
1323 vmbus_close(device->channel);
1329 static int storvsc_do_io(struct hv_device *device,
1330 struct storvsc_cmd_request *request)
1332 struct storvsc_device *stor_device;
1333 struct vstor_packet *vstor_packet;
1334 struct vmbus_channel *outgoing_channel;
1337 vstor_packet = &request->vstor_packet;
1338 stor_device = get_out_stor_device(device);
1344 request->device = device;
1346 * Select an an appropriate channel to send the request out.
1349 outgoing_channel = vmbus_get_outgoing_channel(device->channel);
1352 vstor_packet->flags |= REQUEST_COMPLETION_FLAG;
1354 vstor_packet->vm_srb.length = (sizeof(struct vmscsi_request) -
1358 vstor_packet->vm_srb.sense_info_length = sense_buffer_size;
1361 vstor_packet->vm_srb.data_transfer_length =
1362 request->data_buffer.len;
1364 vstor_packet->operation = VSTOR_OPERATION_EXECUTE_SRB;
1366 if (request->data_buffer.len) {
1367 ret = vmbus_sendpacket_multipagebuffer(outgoing_channel,
1368 &request->data_buffer,
1370 (sizeof(struct vstor_packet) -
1372 (unsigned long)request);
1374 ret = vmbus_sendpacket(device->channel, vstor_packet,
1375 (sizeof(struct vstor_packet) -
1377 (unsigned long)request,
1379 VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
1385 atomic_inc(&stor_device->num_outstanding_req);
1390 static int storvsc_device_alloc(struct scsi_device *sdevice)
1392 struct stor_mem_pools *memp;
1393 int number = STORVSC_MIN_BUF_NR;
1395 memp = kzalloc(sizeof(struct stor_mem_pools), GFP_KERNEL);
1399 memp->request_pool =
1400 kmem_cache_create(dev_name(&sdevice->sdev_dev),
1401 sizeof(struct storvsc_cmd_request), 0,
1402 SLAB_HWCACHE_ALIGN, NULL);
1404 if (!memp->request_pool)
1407 memp->request_mempool = mempool_create(number, mempool_alloc_slab,
1409 memp->request_pool);
1411 if (!memp->request_mempool)
1414 sdevice->hostdata = memp;
1419 kmem_cache_destroy(memp->request_pool);
1426 static void storvsc_device_destroy(struct scsi_device *sdevice)
1428 struct stor_mem_pools *memp = sdevice->hostdata;
1433 mempool_destroy(memp->request_mempool);
1434 kmem_cache_destroy(memp->request_pool);
1436 sdevice->hostdata = NULL;
1439 static int storvsc_device_configure(struct scsi_device *sdevice)
1441 scsi_adjust_queue_depth(sdevice, MSG_SIMPLE_TAG,
1442 STORVSC_MAX_IO_REQUESTS);
1444 blk_queue_max_segment_size(sdevice->request_queue, PAGE_SIZE);
1446 blk_queue_bounce_limit(sdevice->request_queue, BLK_BOUNCE_ANY);
1448 blk_queue_rq_timeout(sdevice->request_queue, (storvsc_timeout * HZ));
1450 sdevice->no_write_same = 1;
1455 static int storvsc_get_chs(struct scsi_device *sdev, struct block_device * bdev,
1456 sector_t capacity, int *info)
1458 sector_t nsect = capacity;
1459 sector_t cylinders = nsect;
1460 int heads, sectors_pt;
1463 * We are making up these values; let us keep it simple.
1466 sectors_pt = 0x3f; /* Sectors per track */
1467 sector_div(cylinders, heads * sectors_pt);
1468 if ((sector_t)(cylinders + 1) * heads * sectors_pt < nsect)
1472 info[1] = sectors_pt;
1473 info[2] = (int)cylinders;
1478 static int storvsc_host_reset_handler(struct scsi_cmnd *scmnd)
1480 struct hv_host_device *host_dev = shost_priv(scmnd->device->host);
1481 struct hv_device *device = host_dev->dev;
1483 struct storvsc_device *stor_device;
1484 struct storvsc_cmd_request *request;
1485 struct vstor_packet *vstor_packet;
1489 stor_device = get_out_stor_device(device);
1493 request = &stor_device->reset_request;
1494 vstor_packet = &request->vstor_packet;
1496 init_completion(&request->wait_event);
1498 vstor_packet->operation = VSTOR_OPERATION_RESET_BUS;
1499 vstor_packet->flags = REQUEST_COMPLETION_FLAG;
1500 vstor_packet->vm_srb.path_id = stor_device->path_id;
1502 ret = vmbus_sendpacket(device->channel, vstor_packet,
1503 (sizeof(struct vstor_packet) -
1505 (unsigned long)&stor_device->reset_request,
1507 VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
1511 t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
1513 return TIMEOUT_ERROR;
1517 * At this point, all outstanding requests in the adapter
1518 * should have been flushed out and return to us
1519 * There is a potential race here where the host may be in
1520 * the process of responding when we return from here.
1521 * Just wait for all in-transit packets to be accounted for
1522 * before we return from here.
1524 storvsc_wait_to_drain(stor_device);
1530 * The host guarantees to respond to each command, although I/O latencies might
1531 * be unbounded on Azure. Reset the timer unconditionally to give the host a
1532 * chance to perform EH.
1534 static enum blk_eh_timer_return storvsc_eh_timed_out(struct scsi_cmnd *scmnd)
1536 return BLK_EH_RESET_TIMER;
1539 static bool storvsc_scsi_cmd_ok(struct scsi_cmnd *scmnd)
1541 bool allowed = true;
1542 u8 scsi_op = scmnd->cmnd[0];
1545 /* the host does not handle WRITE_SAME, log accident usage */
1548 * smartd sends this command and the host does not handle
1549 * this. So, don't send it.
1552 scmnd->result = ILLEGAL_REQUEST << 16;
1561 static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
1564 struct hv_host_device *host_dev = shost_priv(host);
1565 struct hv_device *dev = host_dev->dev;
1566 struct storvsc_cmd_request *cmd_request;
1567 unsigned int request_size = 0;
1569 struct scatterlist *sgl;
1570 unsigned int sg_count = 0;
1571 struct vmscsi_request *vm_srb;
1572 struct stor_mem_pools *memp = scmnd->device->hostdata;
1574 if (vmstor_current_major <= VMSTOR_WIN8_MAJOR) {
1576 * On legacy hosts filter unimplemented commands.
1577 * Future hosts are expected to correctly handle
1578 * unsupported commands. Furthermore, it is
1579 * possible that some of the currently
1580 * unsupported commands maybe supported in
1581 * future versions of the host.
1583 if (!storvsc_scsi_cmd_ok(scmnd)) {
1584 scmnd->scsi_done(scmnd);
1589 request_size = sizeof(struct storvsc_cmd_request);
1591 cmd_request = mempool_alloc(memp->request_mempool,
1595 * We might be invoked in an interrupt context; hence
1596 * mempool_alloc() can fail.
1599 return SCSI_MLQUEUE_DEVICE_BUSY;
1601 memset(cmd_request, 0, sizeof(struct storvsc_cmd_request));
1603 /* Setup the cmd request */
1604 cmd_request->cmd = scmnd;
1606 scmnd->host_scribble = (unsigned char *)cmd_request;
1608 vm_srb = &cmd_request->vstor_packet.vm_srb;
1609 vm_srb->win8_extension.time_out_value = 60;
1611 vm_srb->win8_extension.srb_flags |=
1612 (SRB_FLAGS_QUEUE_ACTION_ENABLE |
1613 SRB_FLAGS_DISABLE_SYNCH_TRANSFER);
1616 switch (scmnd->sc_data_direction) {
1618 vm_srb->data_in = WRITE_TYPE;
1619 vm_srb->win8_extension.srb_flags |= SRB_FLAGS_DATA_OUT;
1621 case DMA_FROM_DEVICE:
1622 vm_srb->data_in = READ_TYPE;
1623 vm_srb->win8_extension.srb_flags |= SRB_FLAGS_DATA_IN;
1626 vm_srb->data_in = UNKNOWN_TYPE;
1627 vm_srb->win8_extension.srb_flags |= (SRB_FLAGS_DATA_IN |
1628 SRB_FLAGS_DATA_OUT);
1633 vm_srb->port_number = host_dev->port;
1634 vm_srb->path_id = scmnd->device->channel;
1635 vm_srb->target_id = scmnd->device->id;
1636 vm_srb->lun = scmnd->device->lun;
1638 vm_srb->cdb_length = scmnd->cmd_len;
1640 memcpy(vm_srb->cdb, scmnd->cmnd, vm_srb->cdb_length);
1642 cmd_request->sense_buffer = scmnd->sense_buffer;
1645 cmd_request->data_buffer.len = scsi_bufflen(scmnd);
1646 if (scsi_sg_count(scmnd)) {
1647 sgl = (struct scatterlist *)scsi_sglist(scmnd);
1648 sg_count = scsi_sg_count(scmnd);
1650 /* check if we need to bounce the sgl */
1651 if (do_bounce_buffer(sgl, scsi_sg_count(scmnd)) != -1) {
1652 cmd_request->bounce_sgl =
1653 create_bounce_buffer(sgl, scsi_sg_count(scmnd),
1654 scsi_bufflen(scmnd),
1656 if (!cmd_request->bounce_sgl) {
1657 ret = SCSI_MLQUEUE_HOST_BUSY;
1661 cmd_request->bounce_sgl_count =
1662 ALIGN(scsi_bufflen(scmnd), PAGE_SIZE) >>
1665 if (vm_srb->data_in == WRITE_TYPE)
1666 copy_to_bounce_buffer(sgl,
1667 cmd_request->bounce_sgl,
1668 scsi_sg_count(scmnd));
1670 sgl = cmd_request->bounce_sgl;
1671 sg_count = cmd_request->bounce_sgl_count;
1674 cmd_request->data_buffer.offset = sgl[0].offset;
1676 for (i = 0; i < sg_count; i++)
1677 cmd_request->data_buffer.pfn_array[i] =
1678 page_to_pfn(sg_page((&sgl[i])));
1680 } else if (scsi_sglist(scmnd)) {
1681 cmd_request->data_buffer.offset =
1682 virt_to_phys(scsi_sglist(scmnd)) & (PAGE_SIZE-1);
1683 cmd_request->data_buffer.pfn_array[0] =
1684 virt_to_phys(scsi_sglist(scmnd)) >> PAGE_SHIFT;
1687 /* Invokes the vsc to start an IO */
1688 ret = storvsc_do_io(dev, cmd_request);
1690 if (ret == -EAGAIN) {
1693 if (cmd_request->bounce_sgl_count) {
1694 destroy_bounce_buffer(cmd_request->bounce_sgl,
1695 cmd_request->bounce_sgl_count);
1697 ret = SCSI_MLQUEUE_DEVICE_BUSY;
1705 mempool_free(cmd_request, memp->request_mempool);
1706 scmnd->host_scribble = NULL;
1710 static struct scsi_host_template scsi_driver = {
1711 .module = THIS_MODULE,
1712 .name = "storvsc_host_t",
1713 .bios_param = storvsc_get_chs,
1714 .queuecommand = storvsc_queuecommand,
1715 .eh_host_reset_handler = storvsc_host_reset_handler,
1716 .eh_timed_out = storvsc_eh_timed_out,
1717 .slave_alloc = storvsc_device_alloc,
1718 .slave_destroy = storvsc_device_destroy,
1719 .slave_configure = storvsc_device_configure,
1721 .can_queue = STORVSC_MAX_IO_REQUESTS*STORVSC_MAX_TARGETS,
1723 /* no use setting to 0 since ll_blk_rw reset it to 1 */
1725 .sg_tablesize = MAX_MULTIPAGE_BUFFER_COUNT,
1726 .use_clustering = DISABLE_CLUSTERING,
1727 /* Make sure we dont get a sg segment crosses a page boundary */
1728 .dma_boundary = PAGE_SIZE-1,
1738 static const struct hv_vmbus_device_id id_table[] = {
1741 .driver_data = SCSI_GUID
1745 .driver_data = IDE_GUID
1747 /* Fibre Channel GUID */
1750 .driver_data = SFC_GUID
1755 MODULE_DEVICE_TABLE(vmbus, id_table);
1757 static int storvsc_probe(struct hv_device *device,
1758 const struct hv_vmbus_device_id *dev_id)
1761 struct Scsi_Host *host;
1762 struct hv_host_device *host_dev;
1763 bool dev_is_ide = ((dev_id->driver_data == IDE_GUID) ? true : false);
1765 struct storvsc_device *stor_device;
1768 * Based on the windows host we are running on,
1769 * set state to properly communicate with the host.
1772 switch (vmbus_proto_version) {
1773 case VERSION_WS2008:
1775 sense_buffer_size = PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE;
1776 vmscsi_size_delta = sizeof(struct vmscsi_win8_extension);
1777 vmstor_current_major = VMSTOR_WIN7_MAJOR;
1778 vmstor_current_minor = VMSTOR_WIN7_MINOR;
1781 sense_buffer_size = POST_WIN7_STORVSC_SENSE_BUFFER_SIZE;
1782 vmscsi_size_delta = 0;
1783 vmstor_current_major = VMSTOR_WIN8_MAJOR;
1784 vmstor_current_minor = VMSTOR_WIN8_MINOR;
1788 if (dev_id->driver_data == SFC_GUID)
1789 scsi_driver.can_queue = (STORVSC_MAX_IO_REQUESTS *
1790 STORVSC_FC_MAX_TARGETS);
1791 host = scsi_host_alloc(&scsi_driver,
1792 sizeof(struct hv_host_device));
1796 host_dev = shost_priv(host);
1797 memset(host_dev, 0, sizeof(struct hv_host_device));
1799 host_dev->port = host->host_no;
1800 host_dev->dev = device;
1803 stor_device = kzalloc(sizeof(struct storvsc_device), GFP_KERNEL);
1809 stor_device->destroy = false;
1810 stor_device->open_sub_channel = false;
1811 init_waitqueue_head(&stor_device->waiting_to_drain);
1812 stor_device->device = device;
1813 stor_device->host = host;
1814 hv_set_drvdata(device, stor_device);
1816 stor_device->port_number = host->host_no;
1817 ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size);
1821 host_dev->path = stor_device->path_id;
1822 host_dev->target = stor_device->target_id;
1824 switch (dev_id->driver_data) {
1826 host->max_lun = STORVSC_FC_MAX_LUNS_PER_TARGET;
1827 host->max_id = STORVSC_FC_MAX_TARGETS;
1828 host->max_channel = STORVSC_FC_MAX_CHANNELS - 1;
1832 host->max_lun = STORVSC_MAX_LUNS_PER_TARGET;
1833 host->max_id = STORVSC_MAX_TARGETS;
1834 host->max_channel = STORVSC_MAX_CHANNELS - 1;
1838 host->max_lun = STORVSC_IDE_MAX_LUNS_PER_TARGET;
1839 host->max_id = STORVSC_IDE_MAX_TARGETS;
1840 host->max_channel = STORVSC_IDE_MAX_CHANNELS - 1;
1843 /* max cmd length */
1844 host->max_cmd_len = STORVSC_MAX_CMD_LEN;
1846 /* Register the HBA and start the scsi bus scan */
1847 ret = scsi_add_host(host, &device->device);
1852 scsi_scan_host(host);
1854 target = (device->dev_instance.b[5] << 8 |
1855 device->dev_instance.b[4]);
1856 ret = scsi_add_device(host, 0, target, 0);
1858 scsi_remove_host(host);
1866 * Once we have connected with the host, we would need to
1867 * to invoke storvsc_dev_remove() to rollback this state and
1868 * this call also frees up the stor_device; hence the jump around
1871 storvsc_dev_remove(device);
1878 scsi_host_put(host);
1882 static int storvsc_remove(struct hv_device *dev)
1884 struct storvsc_device *stor_device = hv_get_drvdata(dev);
1885 struct Scsi_Host *host = stor_device->host;
1887 scsi_remove_host(host);
1888 storvsc_dev_remove(dev);
1889 scsi_host_put(host);
1894 static struct hv_driver storvsc_drv = {
1895 .name = KBUILD_MODNAME,
1896 .id_table = id_table,
1897 .probe = storvsc_probe,
1898 .remove = storvsc_remove,
1901 static int __init storvsc_drv_init(void)
1903 u32 max_outstanding_req_per_channel;
1906 * Divide the ring buffer data size (which is 1 page less
1907 * than the ring buffer size since that page is reserved for
1908 * the ring buffer indices) by the max request size (which is
1909 * vmbus_channel_packet_multipage_buffer + struct vstor_packet + u64)
1911 max_outstanding_req_per_channel =
1912 ((storvsc_ringbuffer_size - PAGE_SIZE) /
1913 ALIGN(MAX_MULTIPAGE_BUFFER_PACKET +
1914 sizeof(struct vstor_packet) + sizeof(u64) -
1918 if (max_outstanding_req_per_channel <
1919 STORVSC_MAX_IO_REQUESTS)
1922 return vmbus_driver_register(&storvsc_drv);
1925 static void __exit storvsc_drv_exit(void)
1927 vmbus_driver_unregister(&storvsc_drv);
1930 MODULE_LICENSE("GPL");
1931 MODULE_DESCRIPTION("Microsoft Hyper-V virtual storage driver");
1932 module_init(storvsc_drv_init);
1933 module_exit(storvsc_drv_exit);