3c96e9300d0087e1a5d270e72d83cac6a1e4a84f
[platform/adaptation/renesas_rcar/renesas_kernel.git] / drivers / scsi / libfc / fc_fcp.c
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37
38 #include <scsi/fc/fc_fc2.h>
39
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42
43 #include "fc_libfc.h"
44
45 static struct kmem_cache *scsi_pkt_cachep;
46
47 /* SRB state definitions */
48 #define FC_SRB_FREE             0               /* cmd is free */
49 #define FC_SRB_CMD_SENT         (1 << 0)        /* cmd has been sent */
50 #define FC_SRB_RCV_STATUS       (1 << 1)        /* response has arrived */
51 #define FC_SRB_ABORT_PENDING    (1 << 2)        /* cmd abort sent to device */
52 #define FC_SRB_ABORTED          (1 << 3)        /* abort acknowledged */
53 #define FC_SRB_DISCONTIG        (1 << 4)        /* non-sequential data recvd */
54 #define FC_SRB_COMPL            (1 << 5)        /* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)      /* timer function processing */
56
57 #define FC_SRB_READ             (1 << 1)
58 #define FC_SRB_WRITE            (1 << 0)
59
60 /*
61  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
62  */
63 #define CMD_SP(Cmnd)                ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
64 #define CMD_ENTRY_STATUS(Cmnd)      ((Cmnd)->SCp.have_data_in)
65 #define CMD_COMPL_STATUS(Cmnd)      ((Cmnd)->SCp.this_residual)
66 #define CMD_SCSI_STATUS(Cmnd)       ((Cmnd)->SCp.Status)
67 #define CMD_RESID_LEN(Cmnd)         ((Cmnd)->SCp.buffers_residual)
68
69 /**
70  * struct fc_fcp_internal - FCP layer internal data
71  * @scsi_pkt_pool: Memory pool to draw FCP packets from
72  * @scsi_queue_lock: Protects the scsi_pkt_queue
73  * @scsi_pkt_queue: Current FCP packets
74  * @last_can_queue_ramp_down_time: ramp down time
75  * @last_can_queue_ramp_up_time: ramp up time
76  * @max_can_queue: max can_queue size
77  */
78 struct fc_fcp_internal {
79         mempool_t               *scsi_pkt_pool;
80         spinlock_t              scsi_queue_lock;
81         struct list_head        scsi_pkt_queue;
82         unsigned long           last_can_queue_ramp_down_time;
83         unsigned long           last_can_queue_ramp_up_time;
84         int                     max_can_queue;
85 };
86
87 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
88
89 /*
90  * function prototypes
91  * FC scsi I/O related functions
92  */
93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
100 static void fc_fcp_timeout(unsigned long);
101 static void fc_fcp_rec(struct fc_fcp_pkt *);
102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
104 static void fc_io_compl(struct fc_fcp_pkt *);
105
106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
109
110 /*
111  * command status codes
112  */
113 #define FC_COMPLETE             0
114 #define FC_CMD_ABORTED          1
115 #define FC_CMD_RESET            2
116 #define FC_CMD_PLOGO            3
117 #define FC_SNS_RCV              4
118 #define FC_TRANS_ERR            5
119 #define FC_DATA_OVRRUN          6
120 #define FC_DATA_UNDRUN          7
121 #define FC_ERROR                8
122 #define FC_HRD_ERROR            9
123 #define FC_CRC_ERROR            10
124 #define FC_TIMED_OUT            11
125
126 /*
127  * Error recovery timeout values.
128  */
129 #define FC_SCSI_TM_TOV          (10 * HZ)
130 #define FC_HOST_RESET_TIMEOUT   (30 * HZ)
131 #define FC_CAN_QUEUE_PERIOD     (60 * HZ)
132
133 #define FC_MAX_ERROR_CNT        5
134 #define FC_MAX_RECOV_RETRY      3
135
136 #define FC_FCP_DFLT_QUEUE_DEPTH 32
137
138 /**
139  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
140  * @lport: The local port that the FCP packet is for
141  * @gfp:   GFP flags for allocation
142  *
143  * Return value: fcp_pkt structure or null on allocation failure.
144  * Context:      Can be called from process context, no lock is required.
145  */
146 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
147 {
148         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
149         struct fc_fcp_pkt *fsp;
150
151         fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
152         if (fsp) {
153                 memset(fsp, 0, sizeof(*fsp));
154                 fsp->lp = lport;
155                 fsp->xfer_ddp = FC_XID_UNKNOWN;
156                 atomic_set(&fsp->ref_cnt, 1);
157                 init_timer(&fsp->timer);
158                 fsp->timer.data = (unsigned long)fsp;
159                 INIT_LIST_HEAD(&fsp->list);
160                 spin_lock_init(&fsp->scsi_pkt_lock);
161         } else {
162                 per_cpu_ptr(lport->stats, get_cpu())->FcpPktAllocFails++;
163                 put_cpu();
164         }
165         return fsp;
166 }
167
168 /**
169  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
170  * @fsp: The FCP packet to be released
171  *
172  * Context: Can be called from process or interrupt context,
173  *          no lock is required.
174  */
175 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
176 {
177         if (atomic_dec_and_test(&fsp->ref_cnt)) {
178                 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
179
180                 mempool_free(fsp, si->scsi_pkt_pool);
181         }
182 }
183
184 /**
185  * fc_fcp_pkt_hold() - Hold a fcp_pkt
186  * @fsp: The FCP packet to be held
187  */
188 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
189 {
190         atomic_inc(&fsp->ref_cnt);
191 }
192
193 /**
194  * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
195  * @seq: The sequence that the FCP packet is on (required by destructor API)
196  * @fsp: The FCP packet to be released
197  *
198  * This routine is called by a destructor callback in the exch_seq_send()
199  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
200  * argument even though it is not used by this routine.
201  *
202  * Context: No locking required.
203  */
204 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
205 {
206         fc_fcp_pkt_release(fsp);
207 }
208
209 /**
210  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
211  * @fsp: The FCP packet to be locked and incremented
212  *
213  * We should only return error if we return a command to SCSI-ml before
214  * getting a response. This can happen in cases where we send a abort, but
215  * do not wait for the response and the abort and command can be passing
216  * each other on the wire/network-layer.
217  *
218  * Note: this function locks the packet and gets a reference to allow
219  * callers to call the completion function while the lock is held and
220  * not have to worry about the packets refcount.
221  *
222  * TODO: Maybe we should just have callers grab/release the lock and
223  * have a function that they call to verify the fsp and grab a ref if
224  * needed.
225  */
226 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
227 {
228         spin_lock_bh(&fsp->scsi_pkt_lock);
229         if (fsp->state & FC_SRB_COMPL) {
230                 spin_unlock_bh(&fsp->scsi_pkt_lock);
231                 return -EPERM;
232         }
233
234         fc_fcp_pkt_hold(fsp);
235         return 0;
236 }
237
238 /**
239  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
240  *                       reference count
241  * @fsp: The FCP packet to be unlocked and decremented
242  */
243 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
244 {
245         spin_unlock_bh(&fsp->scsi_pkt_lock);
246         fc_fcp_pkt_release(fsp);
247 }
248
249 /**
250  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
251  * @fsp:   The FCP packet to start a timer for
252  * @delay: The timeout period in jiffies
253  */
254 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
255 {
256         if (!(fsp->state & FC_SRB_COMPL))
257                 mod_timer(&fsp->timer, jiffies + delay);
258 }
259
260 /**
261  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
262  *                       fcp_pkt
263  * @fsp: The FCP packet to abort exchanges on
264  */
265 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
266 {
267         if (!fsp->seq_ptr)
268                 return -EINVAL;
269
270         per_cpu_ptr(fsp->lp->stats, get_cpu())->FcpPktAborts++;
271         put_cpu();
272
273         fsp->state |= FC_SRB_ABORT_PENDING;
274         return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
275 }
276
277 /**
278  * fc_fcp_retry_cmd() - Retry a fcp_pkt
279  * @fsp: The FCP packet to be retried
280  *
281  * Sets the status code to be FC_ERROR and then calls
282  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
283  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
284  * The SCSI-ml will retry the command.
285  */
286 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
287 {
288         if (fsp->seq_ptr) {
289                 fsp->lp->tt.exch_done(fsp->seq_ptr);
290                 fsp->seq_ptr = NULL;
291         }
292
293         fsp->state &= ~FC_SRB_ABORT_PENDING;
294         fsp->io_status = 0;
295         fsp->status_code = FC_ERROR;
296         fc_fcp_complete_locked(fsp);
297 }
298
299 /**
300  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
301  * @fsp: The FCP packet that will manage the DDP frames
302  * @xid: The XID that will be used for the DDP exchange
303  */
304 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
305 {
306         struct fc_lport *lport;
307
308         lport = fsp->lp;
309         if ((fsp->req_flags & FC_SRB_READ) &&
310             (lport->lro_enabled) && (lport->tt.ddp_setup)) {
311                 if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
312                                         scsi_sg_count(fsp->cmd)))
313                         fsp->xfer_ddp = xid;
314         }
315 }
316
317 /**
318  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
319  *                     DDP related resources for a fcp_pkt
320  * @fsp: The FCP packet that DDP had been used on
321  */
322 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
323 {
324         struct fc_lport *lport;
325
326         if (!fsp)
327                 return;
328
329         if (fsp->xfer_ddp == FC_XID_UNKNOWN)
330                 return;
331
332         lport = fsp->lp;
333         if (lport->tt.ddp_done) {
334                 fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
335                 fsp->xfer_ddp = FC_XID_UNKNOWN;
336         }
337 }
338
339 /**
340  * fc_fcp_can_queue_ramp_up() - increases can_queue
341  * @lport: lport to ramp up can_queue
342  */
343 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
344 {
345         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
346         unsigned long flags;
347         int can_queue;
348
349         spin_lock_irqsave(lport->host->host_lock, flags);
350
351         if (si->last_can_queue_ramp_up_time &&
352             (time_before(jiffies, si->last_can_queue_ramp_up_time +
353                          FC_CAN_QUEUE_PERIOD)))
354                 goto unlock;
355
356         if (time_before(jiffies, si->last_can_queue_ramp_down_time +
357                         FC_CAN_QUEUE_PERIOD))
358                 goto unlock;
359
360         si->last_can_queue_ramp_up_time = jiffies;
361
362         can_queue = lport->host->can_queue << 1;
363         if (can_queue >= si->max_can_queue) {
364                 can_queue = si->max_can_queue;
365                 si->last_can_queue_ramp_down_time = 0;
366         }
367         lport->host->can_queue = can_queue;
368         shost_printk(KERN_ERR, lport->host, "libfc: increased "
369                      "can_queue to %d.\n", can_queue);
370
371 unlock:
372         spin_unlock_irqrestore(lport->host->host_lock, flags);
373 }
374
375 /**
376  * fc_fcp_can_queue_ramp_down() - reduces can_queue
377  * @lport: lport to reduce can_queue
378  *
379  * If we are getting memory allocation failures, then we may
380  * be trying to execute too many commands. We let the running
381  * commands complete or timeout, then try again with a reduced
382  * can_queue. Eventually we will hit the point where we run
383  * on all reserved structs.
384  */
385 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
386 {
387         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
388         unsigned long flags;
389         int can_queue;
390
391         spin_lock_irqsave(lport->host->host_lock, flags);
392
393         if (si->last_can_queue_ramp_down_time &&
394             (time_before(jiffies, si->last_can_queue_ramp_down_time +
395                          FC_CAN_QUEUE_PERIOD)))
396                 goto unlock;
397
398         si->last_can_queue_ramp_down_time = jiffies;
399
400         can_queue = lport->host->can_queue;
401         can_queue >>= 1;
402         if (!can_queue)
403                 can_queue = 1;
404         lport->host->can_queue = can_queue;
405         shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
406                      "Reducing can_queue to %d.\n", can_queue);
407
408 unlock:
409         spin_unlock_irqrestore(lport->host->host_lock, flags);
410 }
411
412 /*
413  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
414  * @lport:      fc lport struct
415  * @len:        payload length
416  *
417  * Allocates fc_frame structure and buffer but if fails to allocate
418  * then reduce can_queue.
419  */
420 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
421                                                   size_t len)
422 {
423         struct fc_frame *fp;
424
425         fp = fc_frame_alloc(lport, len);
426         if (likely(fp))
427                 return fp;
428
429         per_cpu_ptr(lport->stats, get_cpu())->FcpFrameAllocFails++;
430         put_cpu();
431         /* error case */
432         fc_fcp_can_queue_ramp_down(lport);
433         return NULL;
434 }
435
436 /**
437  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
438  * @fsp: The FCP packet the data is on
439  * @fp:  The data frame
440  */
441 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
442 {
443         struct scsi_cmnd *sc = fsp->cmd;
444         struct fc_lport *lport = fsp->lp;
445         struct fc_stats *stats;
446         struct fc_frame_header *fh;
447         size_t start_offset;
448         size_t offset;
449         u32 crc;
450         u32 copy_len = 0;
451         size_t len;
452         void *buf;
453         struct scatterlist *sg;
454         u32 nents;
455         u8 host_bcode = FC_COMPLETE;
456
457         fh = fc_frame_header_get(fp);
458         offset = ntohl(fh->fh_parm_offset);
459         start_offset = offset;
460         len = fr_len(fp) - sizeof(*fh);
461         buf = fc_frame_payload_get(fp, 0);
462
463         /*
464          * if this I/O is ddped then clear it and initiate recovery since data
465          * frames are expected to be placed directly in that case.
466          *
467          * Indicate error to scsi-ml because something went wrong with the
468          * ddp handling to get us here.
469          */
470         if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
471                 fc_fcp_ddp_done(fsp);
472                 FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
473                 host_bcode = FC_ERROR;
474                 goto err;
475         }
476         if (offset + len > fsp->data_len) {
477                 /* this should never happen */
478                 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
479                     fc_frame_crc_check(fp))
480                         goto crc_err;
481                 FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
482                            "data_len %x\n", len, offset, fsp->data_len);
483
484                 /* Data is corrupted indicate scsi-ml should retry */
485                 host_bcode = FC_DATA_OVRRUN;
486                 goto err;
487         }
488         if (offset != fsp->xfer_len)
489                 fsp->state |= FC_SRB_DISCONTIG;
490
491         sg = scsi_sglist(sc);
492         nents = scsi_sg_count(sc);
493
494         if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
495                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
496                                                     &offset, NULL);
497         } else {
498                 crc = crc32(~0, (u8 *) fh, sizeof(*fh));
499                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
500                                                     &offset, &crc);
501                 buf = fc_frame_payload_get(fp, 0);
502                 if (len % 4)
503                         crc = crc32(crc, buf + len, 4 - (len % 4));
504
505                 if (~crc != le32_to_cpu(fr_crc(fp))) {
506 crc_err:
507                         stats = per_cpu_ptr(lport->stats, get_cpu());
508                         stats->ErrorFrames++;
509                         /* per cpu count, not total count, but OK for limit */
510                         if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
511                                 printk(KERN_WARNING "libfc: CRC error on data "
512                                        "frame for port (%6.6x)\n",
513                                        lport->port_id);
514                         put_cpu();
515                         /*
516                          * Assume the frame is total garbage.
517                          * We may have copied it over the good part
518                          * of the buffer.
519                          * If so, we need to retry the entire operation.
520                          * Otherwise, ignore it.
521                          */
522                         if (fsp->state & FC_SRB_DISCONTIG) {
523                                 host_bcode = FC_CRC_ERROR;
524                                 goto err;
525                         }
526                         return;
527                 }
528         }
529
530         if (fsp->xfer_contig_end == start_offset)
531                 fsp->xfer_contig_end += copy_len;
532         fsp->xfer_len += copy_len;
533
534         /*
535          * In the very rare event that this data arrived after the response
536          * and completes the transfer, call the completion handler.
537          */
538         if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
539             fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
540                 fc_fcp_complete_locked(fsp);
541         return;
542 err:
543         fc_fcp_recovery(fsp, host_bcode);
544 }
545
546 /**
547  * fc_fcp_send_data() - Send SCSI data to a target
548  * @fsp:      The FCP packet the data is on
549  * @sp:       The sequence the data is to be sent on
550  * @offset:   The starting offset for this data request
551  * @seq_blen: The burst length for this data request
552  *
553  * Called after receiving a Transfer Ready data descriptor.
554  * If the LLD is capable of sequence offload then send down the
555  * seq_blen amount of data in single frame, otherwise send
556  * multiple frames of the maximum frame payload supported by
557  * the target port.
558  */
559 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
560                             size_t offset, size_t seq_blen)
561 {
562         struct fc_exch *ep;
563         struct scsi_cmnd *sc;
564         struct scatterlist *sg;
565         struct fc_frame *fp = NULL;
566         struct fc_lport *lport = fsp->lp;
567         struct page *page;
568         size_t remaining;
569         size_t t_blen;
570         size_t tlen;
571         size_t sg_bytes;
572         size_t frame_offset, fh_parm_offset;
573         size_t off;
574         int error;
575         void *data = NULL;
576         void *page_addr;
577         int using_sg = lport->sg_supp;
578         u32 f_ctl;
579
580         WARN_ON(seq_blen <= 0);
581         if (unlikely(offset + seq_blen > fsp->data_len)) {
582                 /* this should never happen */
583                 FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
584                            "offset %zx\n", seq_blen, offset);
585                 fc_fcp_send_abort(fsp);
586                 return 0;
587         } else if (offset != fsp->xfer_len) {
588                 /* Out of Order Data Request - no problem, but unexpected. */
589                 FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
590                            "seq_blen %zx offset %zx\n", seq_blen, offset);
591         }
592
593         /*
594          * if LLD is capable of seq_offload then set transport
595          * burst length (t_blen) to seq_blen, otherwise set t_blen
596          * to max FC frame payload previously set in fsp->max_payload.
597          */
598         t_blen = fsp->max_payload;
599         if (lport->seq_offload) {
600                 t_blen = min(seq_blen, (size_t)lport->lso_max);
601                 FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
602                            fsp, seq_blen, lport->lso_max, t_blen);
603         }
604
605         if (t_blen > 512)
606                 t_blen &= ~(512 - 1);   /* round down to block size */
607         sc = fsp->cmd;
608
609         remaining = seq_blen;
610         fh_parm_offset = frame_offset = offset;
611         tlen = 0;
612         seq = lport->tt.seq_start_next(seq);
613         f_ctl = FC_FC_REL_OFF;
614         WARN_ON(!seq);
615
616         sg = scsi_sglist(sc);
617
618         while (remaining > 0 && sg) {
619                 if (offset >= sg->length) {
620                         offset -= sg->length;
621                         sg = sg_next(sg);
622                         continue;
623                 }
624                 if (!fp) {
625                         tlen = min(t_blen, remaining);
626
627                         /*
628                          * TODO.  Temporary workaround.  fc_seq_send() can't
629                          * handle odd lengths in non-linear skbs.
630                          * This will be the final fragment only.
631                          */
632                         if (tlen % 4)
633                                 using_sg = 0;
634                         fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
635                         if (!fp)
636                                 return -ENOMEM;
637
638                         data = fc_frame_header_get(fp) + 1;
639                         fh_parm_offset = frame_offset;
640                         fr_max_payload(fp) = fsp->max_payload;
641                 }
642
643                 off = offset + sg->offset;
644                 sg_bytes = min(tlen, sg->length - offset);
645                 sg_bytes = min(sg_bytes,
646                                (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
647                 page = sg_page(sg) + (off >> PAGE_SHIFT);
648                 if (using_sg) {
649                         get_page(page);
650                         skb_fill_page_desc(fp_skb(fp),
651                                            skb_shinfo(fp_skb(fp))->nr_frags,
652                                            page, off & ~PAGE_MASK, sg_bytes);
653                         fp_skb(fp)->data_len += sg_bytes;
654                         fr_len(fp) += sg_bytes;
655                         fp_skb(fp)->truesize += PAGE_SIZE;
656                 } else {
657                         /*
658                          * The scatterlist item may be bigger than PAGE_SIZE,
659                          * but we must not cross pages inside the kmap.
660                          */
661                         page_addr = kmap_atomic(page);
662                         memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
663                                sg_bytes);
664                         kunmap_atomic(page_addr);
665                         data += sg_bytes;
666                 }
667                 offset += sg_bytes;
668                 frame_offset += sg_bytes;
669                 tlen -= sg_bytes;
670                 remaining -= sg_bytes;
671
672                 if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
673                     (tlen))
674                         continue;
675
676                 /*
677                  * Send sequence with transfer sequence initiative in case
678                  * this is last FCP frame of the sequence.
679                  */
680                 if (remaining == 0)
681                         f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
682
683                 ep = fc_seq_exch(seq);
684                 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
685                                FC_TYPE_FCP, f_ctl, fh_parm_offset);
686
687                 /*
688                  * send fragment using for a sequence.
689                  */
690                 error = lport->tt.seq_send(lport, seq, fp);
691                 if (error) {
692                         WARN_ON(1);             /* send error should be rare */
693                         return error;
694                 }
695                 fp = NULL;
696         }
697         fsp->xfer_len += seq_blen;      /* premature count? */
698         return 0;
699 }
700
701 /**
702  * fc_fcp_abts_resp() - Receive an ABTS response
703  * @fsp: The FCP packet that is being aborted
704  * @fp:  The response frame
705  */
706 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
707 {
708         int ba_done = 1;
709         struct fc_ba_rjt *brp;
710         struct fc_frame_header *fh;
711
712         fh = fc_frame_header_get(fp);
713         switch (fh->fh_r_ctl) {
714         case FC_RCTL_BA_ACC:
715                 break;
716         case FC_RCTL_BA_RJT:
717                 brp = fc_frame_payload_get(fp, sizeof(*brp));
718                 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
719                         break;
720                 /* fall thru */
721         default:
722                 /*
723                  * we will let the command timeout
724                  * and scsi-ml recover in this case,
725                  * therefore cleared the ba_done flag.
726                  */
727                 ba_done = 0;
728         }
729
730         if (ba_done) {
731                 fsp->state |= FC_SRB_ABORTED;
732                 fsp->state &= ~FC_SRB_ABORT_PENDING;
733
734                 if (fsp->wait_for_comp)
735                         complete(&fsp->tm_done);
736                 else
737                         fc_fcp_complete_locked(fsp);
738         }
739 }
740
741 /**
742  * fc_fcp_recv() - Receive an FCP frame
743  * @seq: The sequence the frame is on
744  * @fp:  The received frame
745  * @arg: The related FCP packet
746  *
747  * Context: Called from Soft IRQ context. Can not be called
748  *          holding the FCP packet list lock.
749  */
750 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
751 {
752         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
753         struct fc_lport *lport = fsp->lp;
754         struct fc_frame_header *fh;
755         struct fcp_txrdy *dd;
756         u8 r_ctl;
757         int rc = 0;
758
759         if (IS_ERR(fp)) {
760                 fc_fcp_error(fsp, fp);
761                 return;
762         }
763
764         fh = fc_frame_header_get(fp);
765         r_ctl = fh->fh_r_ctl;
766
767         if (lport->state != LPORT_ST_READY)
768                 goto out;
769         if (fc_fcp_lock_pkt(fsp))
770                 goto out;
771
772         if (fh->fh_type == FC_TYPE_BLS) {
773                 fc_fcp_abts_resp(fsp, fp);
774                 goto unlock;
775         }
776
777         if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
778                 goto unlock;
779
780         if (r_ctl == FC_RCTL_DD_DATA_DESC) {
781                 /*
782                  * received XFER RDY from the target
783                  * need to send data to the target
784                  */
785                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
786                 dd = fc_frame_payload_get(fp, sizeof(*dd));
787                 WARN_ON(!dd);
788
789                 rc = fc_fcp_send_data(fsp, seq,
790                                       (size_t) ntohl(dd->ft_data_ro),
791                                       (size_t) ntohl(dd->ft_burst_len));
792                 if (!rc)
793                         seq->rec_data = fsp->xfer_len;
794         } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
795                 /*
796                  * received a DATA frame
797                  * next we will copy the data to the system buffer
798                  */
799                 WARN_ON(fr_len(fp) < sizeof(*fh));      /* len may be 0 */
800                 fc_fcp_recv_data(fsp, fp);
801                 seq->rec_data = fsp->xfer_contig_end;
802         } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
803                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
804
805                 fc_fcp_resp(fsp, fp);
806         } else {
807                 FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
808         }
809 unlock:
810         fc_fcp_unlock_pkt(fsp);
811 out:
812         fc_frame_free(fp);
813 }
814
815 /**
816  * fc_fcp_resp() - Handler for FCP responses
817  * @fsp: The FCP packet the response is for
818  * @fp:  The response frame
819  */
820 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
821 {
822         struct fc_frame_header *fh;
823         struct fcp_resp *fc_rp;
824         struct fcp_resp_ext *rp_ex;
825         struct fcp_resp_rsp_info *fc_rp_info;
826         u32 plen;
827         u32 expected_len;
828         u32 respl = 0;
829         u32 snsl = 0;
830         u8 flags = 0;
831
832         plen = fr_len(fp);
833         fh = (struct fc_frame_header *)fr_hdr(fp);
834         if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
835                 goto len_err;
836         plen -= sizeof(*fh);
837         fc_rp = (struct fcp_resp *)(fh + 1);
838         fsp->cdb_status = fc_rp->fr_status;
839         flags = fc_rp->fr_flags;
840         fsp->scsi_comp_flags = flags;
841         expected_len = fsp->data_len;
842
843         /* if ddp, update xfer len */
844         fc_fcp_ddp_done(fsp);
845
846         if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
847                 rp_ex = (void *)(fc_rp + 1);
848                 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
849                         if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
850                                 goto len_err;
851                         fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
852                         if (flags & FCP_RSP_LEN_VAL) {
853                                 respl = ntohl(rp_ex->fr_rsp_len);
854                                 if (respl != sizeof(*fc_rp_info))
855                                         goto len_err;
856                                 if (fsp->wait_for_comp) {
857                                         /* Abuse cdb_status for rsp code */
858                                         fsp->cdb_status = fc_rp_info->rsp_code;
859                                         complete(&fsp->tm_done);
860                                         /*
861                                          * tmfs will not have any scsi cmd so
862                                          * exit here
863                                          */
864                                         return;
865                                 }
866                         }
867                         if (flags & FCP_SNS_LEN_VAL) {
868                                 snsl = ntohl(rp_ex->fr_sns_len);
869                                 if (snsl > SCSI_SENSE_BUFFERSIZE)
870                                         snsl = SCSI_SENSE_BUFFERSIZE;
871                                 memcpy(fsp->cmd->sense_buffer,
872                                        (char *)fc_rp_info + respl, snsl);
873                         }
874                 }
875                 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
876                         if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
877                                 goto len_err;
878                         if (flags & FCP_RESID_UNDER) {
879                                 fsp->scsi_resid = ntohl(rp_ex->fr_resid);
880                                 /*
881                                  * The cmnd->underflow is the minimum number of
882                                  * bytes that must be transferred for this
883                                  * command.  Provided a sense condition is not
884                                  * present, make sure the actual amount
885                                  * transferred is at least the underflow value
886                                  * or fail.
887                                  */
888                                 if (!(flags & FCP_SNS_LEN_VAL) &&
889                                     (fc_rp->fr_status == 0) &&
890                                     (scsi_bufflen(fsp->cmd) -
891                                      fsp->scsi_resid) < fsp->cmd->underflow)
892                                         goto err;
893                                 expected_len -= fsp->scsi_resid;
894                         } else {
895                                 fsp->status_code = FC_ERROR;
896                         }
897                 }
898         }
899         fsp->state |= FC_SRB_RCV_STATUS;
900
901         /*
902          * Check for missing or extra data frames.
903          */
904         if (unlikely(fsp->xfer_len != expected_len)) {
905                 if (fsp->xfer_len < expected_len) {
906                         /*
907                          * Some data may be queued locally,
908                          * Wait a at least one jiffy to see if it is delivered.
909                          * If this expires without data, we may do SRR.
910                          */
911                         fc_fcp_timer_set(fsp, 2);
912                         return;
913                 }
914                 fsp->status_code = FC_DATA_OVRRUN;
915                 FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
916                            "len %x, data len %x\n",
917                            fsp->rport->port_id,
918                            fsp->xfer_len, expected_len, fsp->data_len);
919         }
920         fc_fcp_complete_locked(fsp);
921         return;
922
923 len_err:
924         FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
925                    "snsl %u\n", flags, fr_len(fp), respl, snsl);
926 err:
927         fsp->status_code = FC_ERROR;
928         fc_fcp_complete_locked(fsp);
929 }
930
931 /**
932  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
933  *                            fcp_pkt lock held
934  * @fsp: The FCP packet to be completed
935  *
936  * This function may sleep if a timer is pending. The packet lock must be
937  * held, and the host lock must not be held.
938  */
939 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
940 {
941         struct fc_lport *lport = fsp->lp;
942         struct fc_seq *seq;
943         struct fc_exch *ep;
944         u32 f_ctl;
945
946         if (fsp->state & FC_SRB_ABORT_PENDING)
947                 return;
948
949         if (fsp->state & FC_SRB_ABORTED) {
950                 if (!fsp->status_code)
951                         fsp->status_code = FC_CMD_ABORTED;
952         } else {
953                 /*
954                  * Test for transport underrun, independent of response
955                  * underrun status.
956                  */
957                 if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
958                     (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
959                      fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
960                         fsp->status_code = FC_DATA_UNDRUN;
961                         fsp->io_status = 0;
962                 }
963         }
964
965         seq = fsp->seq_ptr;
966         if (seq) {
967                 fsp->seq_ptr = NULL;
968                 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
969                         struct fc_frame *conf_frame;
970                         struct fc_seq *csp;
971
972                         csp = lport->tt.seq_start_next(seq);
973                         conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
974                         if (conf_frame) {
975                                 f_ctl = FC_FC_SEQ_INIT;
976                                 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
977                                 ep = fc_seq_exch(seq);
978                                 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
979                                                ep->did, ep->sid,
980                                                FC_TYPE_FCP, f_ctl, 0);
981                                 lport->tt.seq_send(lport, csp, conf_frame);
982                         }
983                 }
984                 lport->tt.exch_done(seq);
985         }
986         /*
987          * Some resets driven by SCSI are not I/Os and do not have
988          * SCSI commands associated with the requests. We should not
989          * call I/O completion if we do not have a SCSI command.
990          */
991         if (fsp->cmd)
992                 fc_io_compl(fsp);
993 }
994
995 /**
996  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
997  * @fsp:   The FCP packet whose exchanges should be canceled
998  * @error: The reason for the cancellation
999  */
1000 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
1001 {
1002         struct fc_lport *lport = fsp->lp;
1003
1004         if (fsp->seq_ptr) {
1005                 lport->tt.exch_done(fsp->seq_ptr);
1006                 fsp->seq_ptr = NULL;
1007         }
1008         fsp->status_code = error;
1009 }
1010
1011 /**
1012  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1013  * @lport: The local port whose exchanges should be canceled
1014  * @id:    The target's ID
1015  * @lun:   The LUN
1016  * @error: The reason for cancellation
1017  *
1018  * If lun or id is -1, they are ignored.
1019  */
1020 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1021                                     unsigned int lun, int error)
1022 {
1023         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1024         struct fc_fcp_pkt *fsp;
1025         struct scsi_cmnd *sc_cmd;
1026         unsigned long flags;
1027
1028         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1029 restart:
1030         list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1031                 sc_cmd = fsp->cmd;
1032                 if (id != -1 && scmd_id(sc_cmd) != id)
1033                         continue;
1034
1035                 if (lun != -1 && sc_cmd->device->lun != lun)
1036                         continue;
1037
1038                 fc_fcp_pkt_hold(fsp);
1039                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1040
1041                 if (!fc_fcp_lock_pkt(fsp)) {
1042                         fc_fcp_cleanup_cmd(fsp, error);
1043                         fc_io_compl(fsp);
1044                         fc_fcp_unlock_pkt(fsp);
1045                 }
1046
1047                 fc_fcp_pkt_release(fsp);
1048                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1049                 /*
1050                  * while we dropped the lock multiple pkts could
1051                  * have been released, so we have to start over.
1052                  */
1053                 goto restart;
1054         }
1055         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1056 }
1057
1058 /**
1059  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1060  * @lport: The local port whose exchanges are to be aborted
1061  */
1062 static void fc_fcp_abort_io(struct fc_lport *lport)
1063 {
1064         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1065 }
1066
1067 /**
1068  * fc_fcp_pkt_send() - Send a fcp_pkt
1069  * @lport: The local port to send the FCP packet on
1070  * @fsp:   The FCP packet to send
1071  *
1072  * Return:  Zero for success and -1 for failure
1073  * Locks:   Called without locks held
1074  */
1075 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1076 {
1077         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1078         unsigned long flags;
1079         int rc;
1080
1081         fsp->cmd->SCp.ptr = (char *)fsp;
1082         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1083         fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1084
1085         int_to_scsilun(fsp->cmd->device->lun, &fsp->cdb_cmd.fc_lun);
1086         memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1087
1088         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1089         list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1090         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1091         rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1092         if (unlikely(rc)) {
1093                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1094                 fsp->cmd->SCp.ptr = NULL;
1095                 list_del(&fsp->list);
1096                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1097         }
1098
1099         return rc;
1100 }
1101
1102 /**
1103  * get_fsp_rec_tov() - Helper function to get REC_TOV
1104  * @fsp: the FCP packet
1105  *
1106  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
1107  */
1108 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
1109 {
1110         struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
1111
1112         return msecs_to_jiffies(rpriv->e_d_tov) + HZ;
1113 }
1114
1115 /**
1116  * fc_fcp_cmd_send() - Send a FCP command
1117  * @lport: The local port to send the command on
1118  * @fsp:   The FCP packet the command is on
1119  * @resp:  The handler for the response
1120  */
1121 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1122                            void (*resp)(struct fc_seq *,
1123                                         struct fc_frame *fp,
1124                                         void *arg))
1125 {
1126         struct fc_frame *fp;
1127         struct fc_seq *seq;
1128         struct fc_rport *rport;
1129         struct fc_rport_libfc_priv *rpriv;
1130         const size_t len = sizeof(fsp->cdb_cmd);
1131         int rc = 0;
1132
1133         if (fc_fcp_lock_pkt(fsp))
1134                 return 0;
1135
1136         fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1137         if (!fp) {
1138                 rc = -1;
1139                 goto unlock;
1140         }
1141
1142         memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1143         fr_fsp(fp) = fsp;
1144         rport = fsp->rport;
1145         fsp->max_payload = rport->maxframe_size;
1146         rpriv = rport->dd_data;
1147
1148         fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1149                        rpriv->local_port->port_id, FC_TYPE_FCP,
1150                        FC_FCTL_REQ, 0);
1151
1152         seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1153                                       fsp, 0);
1154         if (!seq) {
1155                 rc = -1;
1156                 goto unlock;
1157         }
1158         fsp->seq_ptr = seq;
1159         fc_fcp_pkt_hold(fsp);   /* hold for fc_fcp_pkt_destroy */
1160
1161         setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1162         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1163                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1164
1165 unlock:
1166         fc_fcp_unlock_pkt(fsp);
1167         return rc;
1168 }
1169
1170 /**
1171  * fc_fcp_error() - Handler for FCP layer errors
1172  * @fsp: The FCP packet the error is on
1173  * @fp:  The frame that has errored
1174  */
1175 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1176 {
1177         int error = PTR_ERR(fp);
1178
1179         if (fc_fcp_lock_pkt(fsp))
1180                 return;
1181
1182         if (error == -FC_EX_CLOSED) {
1183                 fc_fcp_retry_cmd(fsp);
1184                 goto unlock;
1185         }
1186
1187         /*
1188          * clear abort pending, because the lower layer
1189          * decided to force completion.
1190          */
1191         fsp->state &= ~FC_SRB_ABORT_PENDING;
1192         fsp->status_code = FC_CMD_PLOGO;
1193         fc_fcp_complete_locked(fsp);
1194 unlock:
1195         fc_fcp_unlock_pkt(fsp);
1196 }
1197
1198 /**
1199  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1200  * @fsp:   The FCP packet to abort on
1201  *
1202  * Called to send an abort and then wait for abort completion
1203  */
1204 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1205 {
1206         int rc = FAILED;
1207         unsigned long ticks_left;
1208
1209         if (fc_fcp_send_abort(fsp))
1210                 return FAILED;
1211
1212         init_completion(&fsp->tm_done);
1213         fsp->wait_for_comp = 1;
1214
1215         spin_unlock_bh(&fsp->scsi_pkt_lock);
1216         ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1217                                                         FC_SCSI_TM_TOV);
1218         spin_lock_bh(&fsp->scsi_pkt_lock);
1219         fsp->wait_for_comp = 0;
1220
1221         if (!ticks_left) {
1222                 FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1223         } else if (fsp->state & FC_SRB_ABORTED) {
1224                 FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1225                 rc = SUCCESS;
1226                 fc_fcp_complete_locked(fsp);
1227         }
1228
1229         return rc;
1230 }
1231
1232 /**
1233  * fc_lun_reset_send() - Send LUN reset command
1234  * @data: The FCP packet that identifies the LUN to be reset
1235  */
1236 static void fc_lun_reset_send(unsigned long data)
1237 {
1238         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1239         struct fc_lport *lport = fsp->lp;
1240
1241         if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1242                 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1243                         return;
1244                 if (fc_fcp_lock_pkt(fsp))
1245                         return;
1246                 setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1247                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1248                 fc_fcp_unlock_pkt(fsp);
1249         }
1250 }
1251
1252 /**
1253  * fc_lun_reset() - Send a LUN RESET command to a device
1254  *                  and wait for the reply
1255  * @lport: The local port to sent the command on
1256  * @fsp:   The FCP packet that identifies the LUN to be reset
1257  * @id:    The SCSI command ID
1258  * @lun:   The LUN ID to be reset
1259  */
1260 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1261                         unsigned int id, unsigned int lun)
1262 {
1263         int rc;
1264
1265         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1266         fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1267         int_to_scsilun(lun, &fsp->cdb_cmd.fc_lun);
1268
1269         fsp->wait_for_comp = 1;
1270         init_completion(&fsp->tm_done);
1271
1272         fc_lun_reset_send((unsigned long)fsp);
1273
1274         /*
1275          * wait for completion of reset
1276          * after that make sure all commands are terminated
1277          */
1278         rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1279
1280         spin_lock_bh(&fsp->scsi_pkt_lock);
1281         fsp->state |= FC_SRB_COMPL;
1282         spin_unlock_bh(&fsp->scsi_pkt_lock);
1283
1284         del_timer_sync(&fsp->timer);
1285
1286         spin_lock_bh(&fsp->scsi_pkt_lock);
1287         if (fsp->seq_ptr) {
1288                 lport->tt.exch_done(fsp->seq_ptr);
1289                 fsp->seq_ptr = NULL;
1290         }
1291         fsp->wait_for_comp = 0;
1292         spin_unlock_bh(&fsp->scsi_pkt_lock);
1293
1294         if (!rc) {
1295                 FC_SCSI_DBG(lport, "lun reset failed\n");
1296                 return FAILED;
1297         }
1298
1299         /* cdb_status holds the tmf's rsp code */
1300         if (fsp->cdb_status != FCP_TMF_CMPL)
1301                 return FAILED;
1302
1303         FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1304         fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1305         return SUCCESS;
1306 }
1307
1308 /**
1309  * fc_tm_done() - Task Management response handler
1310  * @seq: The sequence that the response is on
1311  * @fp:  The response frame
1312  * @arg: The FCP packet the response is for
1313  */
1314 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1315 {
1316         struct fc_fcp_pkt *fsp = arg;
1317         struct fc_frame_header *fh;
1318
1319         if (IS_ERR(fp)) {
1320                 /*
1321                  * If there is an error just let it timeout or wait
1322                  * for TMF to be aborted if it timedout.
1323                  *
1324                  * scsi-eh will escalate for when either happens.
1325                  */
1326                 return;
1327         }
1328
1329         if (fc_fcp_lock_pkt(fsp))
1330                 goto out;
1331
1332         /*
1333          * raced with eh timeout handler.
1334          */
1335         if (!fsp->seq_ptr || !fsp->wait_for_comp)
1336                 goto out_unlock;
1337
1338         fh = fc_frame_header_get(fp);
1339         if (fh->fh_type != FC_TYPE_BLS)
1340                 fc_fcp_resp(fsp, fp);
1341         fsp->seq_ptr = NULL;
1342         fsp->lp->tt.exch_done(seq);
1343 out_unlock:
1344         fc_fcp_unlock_pkt(fsp);
1345 out:
1346         fc_frame_free(fp);
1347 }
1348
1349 /**
1350  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1351  * @lport: The local port to be cleaned up
1352  */
1353 static void fc_fcp_cleanup(struct fc_lport *lport)
1354 {
1355         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1356 }
1357
1358 /**
1359  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1360  * @data: The FCP packet that has timed out
1361  *
1362  * If REC is supported then just issue it and return. The REC exchange will
1363  * complete or time out and recovery can continue at that point. Otherwise,
1364  * if the response has been received without all the data it has been
1365  * ER_TIMEOUT since the response was received. If the response has not been
1366  * received we see if data was received recently. If it has been then we
1367  * continue waiting, otherwise, we abort the command.
1368  */
1369 static void fc_fcp_timeout(unsigned long data)
1370 {
1371         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1372         struct fc_rport *rport = fsp->rport;
1373         struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1374
1375         if (fc_fcp_lock_pkt(fsp))
1376                 return;
1377
1378         if (fsp->cdb_cmd.fc_tm_flags)
1379                 goto unlock;
1380
1381         fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1382
1383         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1384                 fc_fcp_rec(fsp);
1385         else if (fsp->state & FC_SRB_RCV_STATUS)
1386                 fc_fcp_complete_locked(fsp);
1387         else
1388                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1389         fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1390 unlock:
1391         fc_fcp_unlock_pkt(fsp);
1392 }
1393
1394 /**
1395  * fc_fcp_rec() - Send a REC ELS request
1396  * @fsp: The FCP packet to send the REC request on
1397  */
1398 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1399 {
1400         struct fc_lport *lport;
1401         struct fc_frame *fp;
1402         struct fc_rport *rport;
1403         struct fc_rport_libfc_priv *rpriv;
1404
1405         lport = fsp->lp;
1406         rport = fsp->rport;
1407         rpriv = rport->dd_data;
1408         if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1409                 fsp->status_code = FC_HRD_ERROR;
1410                 fsp->io_status = 0;
1411                 fc_fcp_complete_locked(fsp);
1412                 return;
1413         }
1414
1415         fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1416         if (!fp)
1417                 goto retry;
1418
1419         fr_seq(fp) = fsp->seq_ptr;
1420         fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1421                        rpriv->local_port->port_id, FC_TYPE_ELS,
1422                        FC_FCTL_REQ, 0);
1423         if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1424                                  fc_fcp_rec_resp, fsp,
1425                                  2 * lport->r_a_tov)) {
1426                 fc_fcp_pkt_hold(fsp);           /* hold while REC outstanding */
1427                 return;
1428         }
1429 retry:
1430         if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1431                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1432         else
1433                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1434 }
1435
1436 /**
1437  * fc_fcp_rec_resp() - Handler for REC ELS responses
1438  * @seq: The sequence the response is on
1439  * @fp:  The response frame
1440  * @arg: The FCP packet the response is on
1441  *
1442  * If the response is a reject then the scsi layer will handle
1443  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1444  * set the timeout and return. If the I/O was completed then complete the
1445  * exchange and tell the SCSI layer.
1446  */
1447 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1448 {
1449         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1450         struct fc_els_rec_acc *recp;
1451         struct fc_els_ls_rjt *rjt;
1452         u32 e_stat;
1453         u8 opcode;
1454         u32 offset;
1455         enum dma_data_direction data_dir;
1456         enum fc_rctl r_ctl;
1457         struct fc_rport_libfc_priv *rpriv;
1458
1459         if (IS_ERR(fp)) {
1460                 fc_fcp_rec_error(fsp, fp);
1461                 return;
1462         }
1463
1464         if (fc_fcp_lock_pkt(fsp))
1465                 goto out;
1466
1467         fsp->recov_retry = 0;
1468         opcode = fc_frame_payload_op(fp);
1469         if (opcode == ELS_LS_RJT) {
1470                 rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1471                 switch (rjt->er_reason) {
1472                 default:
1473                         FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1474                                    "reason %d expl %d\n",
1475                                    fsp->rport->port_id, rjt->er_reason,
1476                                    rjt->er_explan);
1477                         /* fall through */
1478                 case ELS_RJT_UNSUP:
1479                         FC_FCP_DBG(fsp, "device does not support REC\n");
1480                         rpriv = fsp->rport->dd_data;
1481                         /*
1482                          * if we do not spport RECs or got some bogus
1483                          * reason then resetup timer so we check for
1484                          * making progress.
1485                          */
1486                         rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1487                         break;
1488                 case ELS_RJT_LOGIC:
1489                 case ELS_RJT_UNAB:
1490                         /*
1491                          * If no data transfer, the command frame got dropped
1492                          * so we just retry.  If data was transferred, we
1493                          * lost the response but the target has no record,
1494                          * so we abort and retry.
1495                          */
1496                         if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1497                             fsp->xfer_len == 0) {
1498                                 fc_fcp_retry_cmd(fsp);
1499                                 break;
1500                         }
1501                         fc_fcp_recovery(fsp, FC_ERROR);
1502                         break;
1503                 }
1504         } else if (opcode == ELS_LS_ACC) {
1505                 if (fsp->state & FC_SRB_ABORTED)
1506                         goto unlock_out;
1507
1508                 data_dir = fsp->cmd->sc_data_direction;
1509                 recp = fc_frame_payload_get(fp, sizeof(*recp));
1510                 offset = ntohl(recp->reca_fc4value);
1511                 e_stat = ntohl(recp->reca_e_stat);
1512
1513                 if (e_stat & ESB_ST_COMPLETE) {
1514
1515                         /*
1516                          * The exchange is complete.
1517                          *
1518                          * For output, we must've lost the response.
1519                          * For input, all data must've been sent.
1520                          * We lost may have lost the response
1521                          * (and a confirmation was requested) and maybe
1522                          * some data.
1523                          *
1524                          * If all data received, send SRR
1525                          * asking for response.  If partial data received,
1526                          * or gaps, SRR requests data at start of gap.
1527                          * Recovery via SRR relies on in-order-delivery.
1528                          */
1529                         if (data_dir == DMA_TO_DEVICE) {
1530                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1531                         } else if (fsp->xfer_contig_end == offset) {
1532                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1533                         } else {
1534                                 offset = fsp->xfer_contig_end;
1535                                 r_ctl = FC_RCTL_DD_SOL_DATA;
1536                         }
1537                         fc_fcp_srr(fsp, r_ctl, offset);
1538                 } else if (e_stat & ESB_ST_SEQ_INIT) {
1539                         /*
1540                          * The remote port has the initiative, so just
1541                          * keep waiting for it to complete.
1542                          */
1543                         fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1544                 } else {
1545
1546                         /*
1547                          * The exchange is incomplete, we have seq. initiative.
1548                          * Lost response with requested confirmation,
1549                          * lost confirmation, lost transfer ready or
1550                          * lost write data.
1551                          *
1552                          * For output, if not all data was received, ask
1553                          * for transfer ready to be repeated.
1554                          *
1555                          * If we received or sent all the data, send SRR to
1556                          * request response.
1557                          *
1558                          * If we lost a response, we may have lost some read
1559                          * data as well.
1560                          */
1561                         r_ctl = FC_RCTL_DD_SOL_DATA;
1562                         if (data_dir == DMA_TO_DEVICE) {
1563                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1564                                 if (offset < fsp->data_len)
1565                                         r_ctl = FC_RCTL_DD_DATA_DESC;
1566                         } else if (offset == fsp->xfer_contig_end) {
1567                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1568                         } else if (fsp->xfer_contig_end < offset) {
1569                                 offset = fsp->xfer_contig_end;
1570                         }
1571                         fc_fcp_srr(fsp, r_ctl, offset);
1572                 }
1573         }
1574 unlock_out:
1575         fc_fcp_unlock_pkt(fsp);
1576 out:
1577         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1578         fc_frame_free(fp);
1579 }
1580
1581 /**
1582  * fc_fcp_rec_error() - Handler for REC errors
1583  * @fsp: The FCP packet the error is on
1584  * @fp:  The REC frame
1585  */
1586 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1587 {
1588         int error = PTR_ERR(fp);
1589
1590         if (fc_fcp_lock_pkt(fsp))
1591                 goto out;
1592
1593         switch (error) {
1594         case -FC_EX_CLOSED:
1595                 fc_fcp_retry_cmd(fsp);
1596                 break;
1597
1598         default:
1599                 FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1600                            fsp, fsp->rport->port_id, error);
1601                 fsp->status_code = FC_CMD_PLOGO;
1602                 /* fall through */
1603
1604         case -FC_EX_TIMEOUT:
1605                 /*
1606                  * Assume REC or LS_ACC was lost.
1607                  * The exchange manager will have aborted REC, so retry.
1608                  */
1609                 FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1610                            fsp->rport->port_id, error, fsp->recov_retry,
1611                            FC_MAX_RECOV_RETRY);
1612                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1613                         fc_fcp_rec(fsp);
1614                 else
1615                         fc_fcp_recovery(fsp, FC_ERROR);
1616                 break;
1617         }
1618         fc_fcp_unlock_pkt(fsp);
1619 out:
1620         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1621 }
1622
1623 /**
1624  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1625  * @fsp: The FCP pkt that needs to be aborted
1626  */
1627 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1628 {
1629         fsp->status_code = code;
1630         fsp->cdb_status = 0;
1631         fsp->io_status = 0;
1632         /*
1633          * if this fails then we let the scsi command timer fire and
1634          * scsi-ml escalate.
1635          */
1636         fc_fcp_send_abort(fsp);
1637 }
1638
1639 /**
1640  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1641  * @fsp:   The FCP packet the SRR is to be sent on
1642  * @r_ctl: The R_CTL field for the SRR request
1643  * This is called after receiving status but insufficient data, or
1644  * when expecting status but the request has timed out.
1645  */
1646 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1647 {
1648         struct fc_lport *lport = fsp->lp;
1649         struct fc_rport *rport;
1650         struct fc_rport_libfc_priv *rpriv;
1651         struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1652         struct fc_seq *seq;
1653         struct fcp_srr *srr;
1654         struct fc_frame *fp;
1655         unsigned int rec_tov;
1656
1657         rport = fsp->rport;
1658         rpriv = rport->dd_data;
1659
1660         if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1661             rpriv->rp_state != RPORT_ST_READY)
1662                 goto retry;                     /* shouldn't happen */
1663         fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1664         if (!fp)
1665                 goto retry;
1666
1667         srr = fc_frame_payload_get(fp, sizeof(*srr));
1668         memset(srr, 0, sizeof(*srr));
1669         srr->srr_op = ELS_SRR;
1670         srr->srr_ox_id = htons(ep->oxid);
1671         srr->srr_rx_id = htons(ep->rxid);
1672         srr->srr_r_ctl = r_ctl;
1673         srr->srr_rel_off = htonl(offset);
1674
1675         fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1676                        rpriv->local_port->port_id, FC_TYPE_FCP,
1677                        FC_FCTL_REQ, 0);
1678
1679         rec_tov = get_fsp_rec_tov(fsp);
1680         seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp,
1681                                       fc_fcp_pkt_destroy,
1682                                       fsp, jiffies_to_msecs(rec_tov));
1683         if (!seq)
1684                 goto retry;
1685
1686         fsp->recov_seq = seq;
1687         fsp->xfer_len = offset;
1688         fsp->xfer_contig_end = offset;
1689         fsp->state &= ~FC_SRB_RCV_STATUS;
1690         fc_fcp_pkt_hold(fsp);           /* hold for outstanding SRR */
1691         return;
1692 retry:
1693         fc_fcp_retry_cmd(fsp);
1694 }
1695
1696 /**
1697  * fc_fcp_srr_resp() - Handler for SRR response
1698  * @seq: The sequence the SRR is on
1699  * @fp:  The SRR frame
1700  * @arg: The FCP packet the SRR is on
1701  */
1702 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1703 {
1704         struct fc_fcp_pkt *fsp = arg;
1705         struct fc_frame_header *fh;
1706
1707         if (IS_ERR(fp)) {
1708                 fc_fcp_srr_error(fsp, fp);
1709                 return;
1710         }
1711
1712         if (fc_fcp_lock_pkt(fsp))
1713                 goto out;
1714
1715         fh = fc_frame_header_get(fp);
1716         /*
1717          * BUG? fc_fcp_srr_error calls exch_done which would release
1718          * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1719          * then fc_exch_timeout would be sending an abort. The exch_done
1720          * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1721          * an abort response though.
1722          */
1723         if (fh->fh_type == FC_TYPE_BLS) {
1724                 fc_fcp_unlock_pkt(fsp);
1725                 return;
1726         }
1727
1728         switch (fc_frame_payload_op(fp)) {
1729         case ELS_LS_ACC:
1730                 fsp->recov_retry = 0;
1731                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1732                 break;
1733         case ELS_LS_RJT:
1734         default:
1735                 fc_fcp_recovery(fsp, FC_ERROR);
1736                 break;
1737         }
1738         fc_fcp_unlock_pkt(fsp);
1739 out:
1740         fsp->lp->tt.exch_done(seq);
1741         fc_frame_free(fp);
1742 }
1743
1744 /**
1745  * fc_fcp_srr_error() - Handler for SRR errors
1746  * @fsp: The FCP packet that the SRR error is on
1747  * @fp:  The SRR frame
1748  */
1749 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1750 {
1751         if (fc_fcp_lock_pkt(fsp))
1752                 goto out;
1753         switch (PTR_ERR(fp)) {
1754         case -FC_EX_TIMEOUT:
1755                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1756                         fc_fcp_rec(fsp);
1757                 else
1758                         fc_fcp_recovery(fsp, FC_TIMED_OUT);
1759                 break;
1760         case -FC_EX_CLOSED:                     /* e.g., link failure */
1761                 /* fall through */
1762         default:
1763                 fc_fcp_retry_cmd(fsp);
1764                 break;
1765         }
1766         fc_fcp_unlock_pkt(fsp);
1767 out:
1768         fsp->lp->tt.exch_done(fsp->recov_seq);
1769 }
1770
1771 /**
1772  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1773  * @lport: The local port to be checked
1774  */
1775 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1776 {
1777         /* lock ? */
1778         return (lport->state == LPORT_ST_READY) &&
1779                 lport->link_up && !lport->qfull;
1780 }
1781
1782 /**
1783  * fc_queuecommand() - The queuecommand function of the SCSI template
1784  * @shost: The Scsi_Host that the command was issued to
1785  * @cmd:   The scsi_cmnd to be executed
1786  *
1787  * This is the i/o strategy routine, called by the SCSI layer.
1788  */
1789 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1790 {
1791         struct fc_lport *lport = shost_priv(shost);
1792         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1793         struct fc_fcp_pkt *fsp;
1794         struct fc_rport_libfc_priv *rpriv;
1795         int rval;
1796         int rc = 0;
1797         struct fc_stats *stats;
1798
1799         rval = fc_remote_port_chkready(rport);
1800         if (rval) {
1801                 sc_cmd->result = rval;
1802                 sc_cmd->scsi_done(sc_cmd);
1803                 return 0;
1804         }
1805
1806         if (!*(struct fc_remote_port **)rport->dd_data) {
1807                 /*
1808                  * rport is transitioning from blocked/deleted to
1809                  * online
1810                  */
1811                 sc_cmd->result = DID_IMM_RETRY << 16;
1812                 sc_cmd->scsi_done(sc_cmd);
1813                 goto out;
1814         }
1815
1816         rpriv = rport->dd_data;
1817
1818         if (!fc_fcp_lport_queue_ready(lport)) {
1819                 if (lport->qfull)
1820                         fc_fcp_can_queue_ramp_down(lport);
1821                 rc = SCSI_MLQUEUE_HOST_BUSY;
1822                 goto out;
1823         }
1824
1825         fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1826         if (fsp == NULL) {
1827                 rc = SCSI_MLQUEUE_HOST_BUSY;
1828                 goto out;
1829         }
1830
1831         /*
1832          * build the libfc request pkt
1833          */
1834         fsp->cmd = sc_cmd;      /* save the cmd */
1835         fsp->rport = rport;     /* set the remote port ptr */
1836
1837         /*
1838          * set up the transfer length
1839          */
1840         fsp->data_len = scsi_bufflen(sc_cmd);
1841         fsp->xfer_len = 0;
1842
1843         /*
1844          * setup the data direction
1845          */
1846         stats = per_cpu_ptr(lport->stats, get_cpu());
1847         if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1848                 fsp->req_flags = FC_SRB_READ;
1849                 stats->InputRequests++;
1850                 stats->InputBytes += fsp->data_len;
1851         } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1852                 fsp->req_flags = FC_SRB_WRITE;
1853                 stats->OutputRequests++;
1854                 stats->OutputBytes += fsp->data_len;
1855         } else {
1856                 fsp->req_flags = 0;
1857                 stats->ControlRequests++;
1858         }
1859         put_cpu();
1860
1861         /*
1862          * send it to the lower layer
1863          * if we get -1 return then put the request in the pending
1864          * queue.
1865          */
1866         rval = fc_fcp_pkt_send(lport, fsp);
1867         if (rval != 0) {
1868                 fsp->state = FC_SRB_FREE;
1869                 fc_fcp_pkt_release(fsp);
1870                 rc = SCSI_MLQUEUE_HOST_BUSY;
1871         }
1872 out:
1873         return rc;
1874 }
1875 EXPORT_SYMBOL(fc_queuecommand);
1876
1877 /**
1878  * fc_io_compl() - Handle responses for completed commands
1879  * @fsp: The FCP packet that is complete
1880  *
1881  * Translates fcp_pkt errors to a Linux SCSI errors.
1882  * The fcp packet lock must be held when calling.
1883  */
1884 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1885 {
1886         struct fc_fcp_internal *si;
1887         struct scsi_cmnd *sc_cmd;
1888         struct fc_lport *lport;
1889         unsigned long flags;
1890
1891         /* release outstanding ddp context */
1892         fc_fcp_ddp_done(fsp);
1893
1894         fsp->state |= FC_SRB_COMPL;
1895         if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1896                 spin_unlock_bh(&fsp->scsi_pkt_lock);
1897                 del_timer_sync(&fsp->timer);
1898                 spin_lock_bh(&fsp->scsi_pkt_lock);
1899         }
1900
1901         lport = fsp->lp;
1902         si = fc_get_scsi_internal(lport);
1903
1904         /*
1905          * if can_queue ramp down is done then try can_queue ramp up
1906          * since commands are completing now.
1907          */
1908         if (si->last_can_queue_ramp_down_time)
1909                 fc_fcp_can_queue_ramp_up(lport);
1910
1911         sc_cmd = fsp->cmd;
1912         CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1913         switch (fsp->status_code) {
1914         case FC_COMPLETE:
1915                 if (fsp->cdb_status == 0) {
1916                         /*
1917                          * good I/O status
1918                          */
1919                         sc_cmd->result = DID_OK << 16;
1920                         if (fsp->scsi_resid)
1921                                 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1922                 } else {
1923                         /*
1924                          * transport level I/O was ok but scsi
1925                          * has non zero status
1926                          */
1927                         sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1928                 }
1929                 break;
1930         case FC_ERROR:
1931                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1932                            "due to FC_ERROR\n");
1933                 sc_cmd->result = DID_ERROR << 16;
1934                 break;
1935         case FC_DATA_UNDRUN:
1936                 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1937                         /*
1938                          * scsi status is good but transport level
1939                          * underrun.
1940                          */
1941                         if (fsp->state & FC_SRB_RCV_STATUS) {
1942                                 sc_cmd->result = DID_OK << 16;
1943                         } else {
1944                                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1945                                            " due to FC_DATA_UNDRUN (trans)\n");
1946                                 sc_cmd->result = DID_ERROR << 16;
1947                         }
1948                 } else {
1949                         /*
1950                          * scsi got underrun, this is an error
1951                          */
1952                         FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1953                                    "due to FC_DATA_UNDRUN (scsi)\n");
1954                         CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1955                         sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1956                 }
1957                 break;
1958         case FC_DATA_OVRRUN:
1959                 /*
1960                  * overrun is an error
1961                  */
1962                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1963                            "due to FC_DATA_OVRRUN\n");
1964                 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1965                 break;
1966         case FC_CMD_ABORTED:
1967                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1968                           "due to FC_CMD_ABORTED\n");
1969                 sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1970                 break;
1971         case FC_CMD_RESET:
1972                 FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
1973                            "due to FC_CMD_RESET\n");
1974                 sc_cmd->result = (DID_RESET << 16);
1975                 break;
1976         case FC_HRD_ERROR:
1977                 FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
1978                            "due to FC_HRD_ERROR\n");
1979                 sc_cmd->result = (DID_NO_CONNECT << 16);
1980                 break;
1981         case FC_CRC_ERROR:
1982                 FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
1983                            "due to FC_CRC_ERROR\n");
1984                 sc_cmd->result = (DID_PARITY << 16);
1985                 break;
1986         case FC_TIMED_OUT:
1987                 FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
1988                            "due to FC_TIMED_OUT\n");
1989                 sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1990                 break;
1991         default:
1992                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1993                            "due to unknown error\n");
1994                 sc_cmd->result = (DID_ERROR << 16);
1995                 break;
1996         }
1997
1998         if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
1999                 sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2000
2001         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2002         list_del(&fsp->list);
2003         sc_cmd->SCp.ptr = NULL;
2004         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2005         sc_cmd->scsi_done(sc_cmd);
2006
2007         /* release ref from initial allocation in queue command */
2008         fc_fcp_pkt_release(fsp);
2009 }
2010
2011 /**
2012  * fc_eh_abort() - Abort a command
2013  * @sc_cmd: The SCSI command to abort
2014  *
2015  * From SCSI host template.
2016  * Send an ABTS to the target device and wait for the response.
2017  */
2018 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2019 {
2020         struct fc_fcp_pkt *fsp;
2021         struct fc_lport *lport;
2022         struct fc_fcp_internal *si;
2023         int rc = FAILED;
2024         unsigned long flags;
2025         int rval;
2026
2027         rval = fc_block_scsi_eh(sc_cmd);
2028         if (rval)
2029                 return rval;
2030
2031         lport = shost_priv(sc_cmd->device->host);
2032         if (lport->state != LPORT_ST_READY)
2033                 return rc;
2034         else if (!lport->link_up)
2035                 return rc;
2036
2037         si = fc_get_scsi_internal(lport);
2038         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2039         fsp = CMD_SP(sc_cmd);
2040         if (!fsp) {
2041                 /* command completed while scsi eh was setting up */
2042                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2043                 return SUCCESS;
2044         }
2045         /* grab a ref so the fsp and sc_cmd cannot be relased from under us */
2046         fc_fcp_pkt_hold(fsp);
2047         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2048
2049         if (fc_fcp_lock_pkt(fsp)) {
2050                 /* completed while we were waiting for timer to be deleted */
2051                 rc = SUCCESS;
2052                 goto release_pkt;
2053         }
2054
2055         rc = fc_fcp_pkt_abort(fsp);
2056         fc_fcp_unlock_pkt(fsp);
2057
2058 release_pkt:
2059         fc_fcp_pkt_release(fsp);
2060         return rc;
2061 }
2062 EXPORT_SYMBOL(fc_eh_abort);
2063
2064 /**
2065  * fc_eh_device_reset() - Reset a single LUN
2066  * @sc_cmd: The SCSI command which identifies the device whose
2067  *          LUN is to be reset
2068  *
2069  * Set from SCSI host template.
2070  */
2071 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2072 {
2073         struct fc_lport *lport;
2074         struct fc_fcp_pkt *fsp;
2075         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2076         int rc = FAILED;
2077         int rval;
2078
2079         rval = fc_block_scsi_eh(sc_cmd);
2080         if (rval)
2081                 return rval;
2082
2083         lport = shost_priv(sc_cmd->device->host);
2084
2085         if (lport->state != LPORT_ST_READY)
2086                 return rc;
2087
2088         FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2089
2090         fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2091         if (fsp == NULL) {
2092                 printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2093                 goto out;
2094         }
2095
2096         /*
2097          * Build the libfc request pkt. Do not set the scsi cmnd, because
2098          * the sc passed in is not setup for execution like when sent
2099          * through the queuecommand callout.
2100          */
2101         fsp->rport = rport;     /* set the remote port ptr */
2102
2103         /*
2104          * flush outstanding commands
2105          */
2106         rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2107         fsp->state = FC_SRB_FREE;
2108         fc_fcp_pkt_release(fsp);
2109
2110 out:
2111         return rc;
2112 }
2113 EXPORT_SYMBOL(fc_eh_device_reset);
2114
2115 /**
2116  * fc_eh_host_reset() - Reset a Scsi_Host.
2117  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2118  */
2119 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2120 {
2121         struct Scsi_Host *shost = sc_cmd->device->host;
2122         struct fc_lport *lport = shost_priv(shost);
2123         unsigned long wait_tmo;
2124
2125         FC_SCSI_DBG(lport, "Resetting host\n");
2126
2127         fc_block_scsi_eh(sc_cmd);
2128
2129         lport->tt.lport_reset(lport);
2130         wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2131         while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2132                                                                wait_tmo))
2133                 msleep(1000);
2134
2135         if (fc_fcp_lport_queue_ready(lport)) {
2136                 shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2137                              "on port (%6.6x)\n", lport->port_id);
2138                 return SUCCESS;
2139         } else {
2140                 shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2141                              "port (%6.6x) is not ready.\n",
2142                              lport->port_id);
2143                 return FAILED;
2144         }
2145 }
2146 EXPORT_SYMBOL(fc_eh_host_reset);
2147
2148 /**
2149  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2150  * @sdev: The SCSI device that identifies the SCSI host
2151  *
2152  * Configures queue depth based on host's cmd_per_len. If not set
2153  * then we use the libfc default.
2154  */
2155 int fc_slave_alloc(struct scsi_device *sdev)
2156 {
2157         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2158
2159         if (!rport || fc_remote_port_chkready(rport))
2160                 return -ENXIO;
2161
2162         if (sdev->tagged_supported)
2163                 scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2164         else
2165                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
2166                                         FC_FCP_DFLT_QUEUE_DEPTH);
2167
2168         return 0;
2169 }
2170 EXPORT_SYMBOL(fc_slave_alloc);
2171
2172 /**
2173  * fc_change_queue_depth() - Change a device's queue depth
2174  * @sdev:   The SCSI device whose queue depth is to change
2175  * @qdepth: The new queue depth
2176  * @reason: The resason for the change
2177  */
2178 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2179 {
2180         switch (reason) {
2181         case SCSI_QDEPTH_DEFAULT:
2182                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2183                 break;
2184         case SCSI_QDEPTH_QFULL:
2185                 scsi_track_queue_full(sdev, qdepth);
2186                 break;
2187         case SCSI_QDEPTH_RAMP_UP:
2188                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2189                 break;
2190         default:
2191                 return -EOPNOTSUPP;
2192         }
2193         return sdev->queue_depth;
2194 }
2195 EXPORT_SYMBOL(fc_change_queue_depth);
2196
2197 /**
2198  * fc_change_queue_type() - Change a device's queue type
2199  * @sdev:     The SCSI device whose queue depth is to change
2200  * @tag_type: Identifier for queue type
2201  */
2202 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2203 {
2204         if (sdev->tagged_supported) {
2205                 scsi_set_tag_type(sdev, tag_type);
2206                 if (tag_type)
2207                         scsi_activate_tcq(sdev, sdev->queue_depth);
2208                 else
2209                         scsi_deactivate_tcq(sdev, sdev->queue_depth);
2210         } else
2211                 tag_type = 0;
2212
2213         return tag_type;
2214 }
2215 EXPORT_SYMBOL(fc_change_queue_type);
2216
2217 /**
2218  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2219  * @lport: The local port that no longer needs the FCP layer
2220  */
2221 void fc_fcp_destroy(struct fc_lport *lport)
2222 {
2223         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2224
2225         if (!list_empty(&si->scsi_pkt_queue))
2226                 printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2227                        "port (%6.6x)\n", lport->port_id);
2228
2229         mempool_destroy(si->scsi_pkt_pool);
2230         kfree(si);
2231         lport->scsi_priv = NULL;
2232 }
2233 EXPORT_SYMBOL(fc_fcp_destroy);
2234
2235 int fc_setup_fcp(void)
2236 {
2237         int rc = 0;
2238
2239         scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2240                                             sizeof(struct fc_fcp_pkt),
2241                                             0, SLAB_HWCACHE_ALIGN, NULL);
2242         if (!scsi_pkt_cachep) {
2243                 printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2244                        "module load failed!");
2245                 rc = -ENOMEM;
2246         }
2247
2248         return rc;
2249 }
2250
2251 void fc_destroy_fcp(void)
2252 {
2253         if (scsi_pkt_cachep)
2254                 kmem_cache_destroy(scsi_pkt_cachep);
2255 }
2256
2257 /**
2258  * fc_fcp_init() - Initialize the FCP layer for a local port
2259  * @lport: The local port to initialize the exchange layer for
2260  */
2261 int fc_fcp_init(struct fc_lport *lport)
2262 {
2263         int rc;
2264         struct fc_fcp_internal *si;
2265
2266         if (!lport->tt.fcp_cmd_send)
2267                 lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2268
2269         if (!lport->tt.fcp_cleanup)
2270                 lport->tt.fcp_cleanup = fc_fcp_cleanup;
2271
2272         if (!lport->tt.fcp_abort_io)
2273                 lport->tt.fcp_abort_io = fc_fcp_abort_io;
2274
2275         si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2276         if (!si)
2277                 return -ENOMEM;
2278         lport->scsi_priv = si;
2279         si->max_can_queue = lport->host->can_queue;
2280         INIT_LIST_HEAD(&si->scsi_pkt_queue);
2281         spin_lock_init(&si->scsi_queue_lock);
2282
2283         si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2284         if (!si->scsi_pkt_pool) {
2285                 rc = -ENOMEM;
2286                 goto free_internal;
2287         }
2288         return 0;
2289
2290 free_internal:
2291         kfree(si);
2292         return rc;
2293 }
2294 EXPORT_SYMBOL(fc_fcp_init);