drivers/scsi/arm/fas216.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  *  linux/drivers/acorn/scsi/fas216.c
   4  *
   5  *  Copyright (C) 1997-2003 Russell King
   6  *
   7  * Based on information in qlogicfas.c by Tom Zerucha, Michael Griffith, and
   8  * other sources, including:
   9  *   the AMD Am53CF94 data sheet
  10  *   the AMD Am53C94 data sheet
  11  *
  12  * This is a generic driver.  To use it, have a look at cumana_2.c.  You
  13  * should define your own structure that overlays FAS216_Info, eg:
  14  * struct my_host_data {
  15  *    FAS216_Info info;
  16  *    ... my host specific data ...
  17  * };
  18  *
  19  * Changelog:
  20  *  30-08-1997  RMK     Created
  21  *  14-09-1997  RMK     Started disconnect support
  22  *  08-02-1998  RMK     Corrected real DMA support
  23  *  15-02-1998  RMK     Started sync xfer support
  24  *  06-04-1998  RMK     Tightened conditions for printing incomplete
  25  *                      transfers
  26  *  02-05-1998  RMK     Added extra checks in fas216_reset
  27  *  24-05-1998  RMK     Fixed synchronous transfers with period >= 200ns
  28  *  27-06-1998  RMK     Changed asm/delay.h to linux/delay.h
  29  *  26-08-1998  RMK     Improved message support wrt MESSAGE_REJECT
  30  *  02-04-2000  RMK     Converted to use the new error handling, and
  31  *                      automatically request sense data upon check
  32  *                      condition status from targets.
  33  */
  34 #include <linux/module.h>
  35 #include <linux/blkdev.h>
  36 #include <linux/kernel.h>
  37 #include <linux/string.h>
  38 #include <linux/ioport.h>
  39 #include <linux/proc_fs.h>
  40 #include <linux/delay.h>
  41 #include <linux/bitops.h>
  42 #include <linux/init.h>
  43 #include <linux/interrupt.h>
  44
  45 #include <asm/dma.h>
  46 #include <asm/io.h>
  47 #include <asm/irq.h>
  48 #include <asm/ecard.h>
  49
  50 #include "../scsi.h"
  51 #include <scsi/scsi_dbg.h>
  52 #include <scsi/scsi_host.h>
  53 #include "fas216.h"
  54 #include "scsi.h"
  55
  56 /* NOTE: SCSI2 Synchronous transfers *require* DMA according to
  57  *  the data sheet.  This restriction is crazy, especially when
  58  *  you only want to send 16 bytes!  What were the guys who
  59  *  designed this chip on at that time?  Did they read the SCSI2
  60  *  spec at all?  The following sections are taken from the SCSI2
  61  *  standard (s2r10) concerning this:
  62  *
  63  * > IMPLEMENTORS NOTES:
  64  * >   (1)  Re-negotiation at every selection is not recommended, since a
  65  * >   significant performance impact is likely.
  66  *
  67  * >  The implied synchronous agreement shall remain in effect until a BUS DEVICE
  68  * >  RESET message is received, until a hard reset condition occurs, or until one
  69  * >  of the two SCSI devices elects to modify the agreement.  The default data
  70  * >  transfer mode is asynchronous data transfer mode.  The default data transfer
  71  * >  mode is entered at power on, after a BUS DEVICE RESET message, or after a hard
  72  * >  reset condition.
  73  *
  74  *  In total, this means that once you have elected to use synchronous
  75  *  transfers, you must always use DMA.
  76  *
  77  *  I was thinking that this was a good chip until I found this restriction ;(
  78  */
  79 #define SCSI2_SYNC
  80 #undef  SCSI2_TAG
  81
  82 #undef DEBUG_CONNECT
  83 #undef DEBUG_MESSAGES
  84
  85 #undef CHECK_STRUCTURE
  86
  87 #define LOG_CONNECT             (1 << 0)
  88 #define LOG_BUSSERVICE          (1 << 1)
  89 #define LOG_FUNCTIONDONE        (1 << 2)
  90 #define LOG_MESSAGES            (1 << 3)
  91 #define LOG_BUFFER              (1 << 4)
  92 #define LOG_ERROR               (1 << 8)
  93
  94 static int level_mask = LOG_ERROR;
  95
  96 module_param(level_mask, int, 0644);
  97
  98 #ifndef MODULE
  99 static int __init fas216_log_setup(char *str)
 100 {
 101         char *s;
 102
 103         level_mask = 0;
 104
 105         while ((s = strsep(&str, ",")) != NULL) {
 106                 switch (s[0]) {
 107                 case 'a':
 108                         if (strcmp(s, "all") == 0)
 109                                 level_mask |= -1;
 110                         break;
 111                 case 'b':
 112                         if (strncmp(s, "bus", 3) == 0)
 113                                 level_mask |= LOG_BUSSERVICE;
 114                         if (strncmp(s, "buf", 3) == 0)
 115                                 level_mask |= LOG_BUFFER;
 116                         break;
 117                 case 'c':
 118                         level_mask |= LOG_CONNECT;
 119                         break;
 120                 case 'e':
 121                         level_mask |= LOG_ERROR;
 122                         break;
 123                 case 'm':
 124                         level_mask |= LOG_MESSAGES;
 125                         break;
 126                 case 'n':
 127                         if (strcmp(s, "none") == 0)
 128                                 level_mask = 0;
 129                         break;
 130                 case 's':
 131                         level_mask |= LOG_FUNCTIONDONE;
 132                         break;
 133                 }
 134         }
 135         return 1;
 136 }
 137
 138 __setup("fas216_logging=", fas216_log_setup);
 139 #endif
 140
 141 static inline unsigned char fas216_readb(FAS216_Info *info, unsigned int reg)
 142 {
 143         unsigned int off = reg << info->scsi.io_shift;
 144         return readb(info->scsi.io_base + off);
 145 }
 146
 147 static inline void fas216_writeb(FAS216_Info *info, unsigned int reg, unsigned int val)
 148 {
 149         unsigned int off = reg << info->scsi.io_shift;
 150         writeb(val, info->scsi.io_base + off);
 151 }
 152
 153 static void fas216_dumpstate(FAS216_Info *info)
 154 {
 155         unsigned char is, stat, inst;
 156
 157         is   = fas216_readb(info, REG_IS);
 158         stat = fas216_readb(info, REG_STAT);
 159         inst = fas216_readb(info, REG_INST);
 160
 161         printk("FAS216: CTCL=%02X CTCM=%02X CMD=%02X STAT=%02X"
 162                " INST=%02X IS=%02X CFIS=%02X",
 163                 fas216_readb(info, REG_CTCL),
 164                 fas216_readb(info, REG_CTCM),
 165                 fas216_readb(info, REG_CMD),  stat, inst, is,
 166                 fas216_readb(info, REG_CFIS));
 167         printk(" CNTL1=%02X CNTL2=%02X CNTL3=%02X CTCH=%02X\n",
 168                 fas216_readb(info, REG_CNTL1),
 169                 fas216_readb(info, REG_CNTL2),
 170                 fas216_readb(info, REG_CNTL3),
 171                 fas216_readb(info, REG_CTCH));
 172 }
 173
 174 static void print_SCp(struct scsi_pointer *SCp, const char *prefix, const char *suffix)
 175 {
 176         printk("%sptr %p this_residual 0x%x buffer %p buffers_residual 0x%x%s",
 177                 prefix, SCp->ptr, SCp->this_residual, SCp->buffer,
 178                 SCp->buffers_residual, suffix);
 179 }
 180
 181 #ifdef CHECK_STRUCTURE
 182 static void fas216_dumpinfo(FAS216_Info *info)
 183 {
 184         static int used = 0;
 185         int i;
 186
 187         if (used++)
 188                 return;
 189
 190         printk("FAS216_Info=\n");
 191         printk("  { magic_start=%lX host=%p SCpnt=%p origSCpnt=%p\n",
 192                 info->magic_start, info->host, info->SCpnt,
 193                 info->origSCpnt);
 194         printk("    scsi={ io_shift=%X irq=%X cfg={ %X %X %X %X }\n",
 195                 info->scsi.io_shift, info->scsi.irq,
 196                 info->scsi.cfg[0], info->scsi.cfg[1], info->scsi.cfg[2],
 197                 info->scsi.cfg[3]);
 198         printk("           type=%p phase=%X\n",
 199                 info->scsi.type, info->scsi.phase);
 200         print_SCp(&info->scsi.SCp, "           SCp={ ", " }\n");
 201         printk("      msgs async_stp=%X disconnectable=%d aborting=%d }\n",
 202                 info->scsi.async_stp,
 203                 info->scsi.disconnectable, info->scsi.aborting);
 204         printk("    stats={ queues=%X removes=%X fins=%X reads=%X writes=%X miscs=%X\n"
 205                "            disconnects=%X aborts=%X bus_resets=%X host_resets=%X}\n",
 206                 info->stats.queues, info->stats.removes, info->stats.fins,
 207                 info->stats.reads, info->stats.writes, info->stats.miscs,
 208                 info->stats.disconnects, info->stats.aborts, info->stats.bus_resets,
 209                 info->stats.host_resets);
 210         printk("    ifcfg={ clockrate=%X select_timeout=%X asyncperiod=%X sync_max_depth=%X }\n",
 211                 info->ifcfg.clockrate, info->ifcfg.select_timeout,
 212                 info->ifcfg.asyncperiod, info->ifcfg.sync_max_depth);
 213         for (i = 0; i < 8; i++) {
 214                 printk("    busyluns[%d]=%08lx dev[%d]={ disconnect_ok=%d stp=%X sof=%X sync_state=%X }\n",
 215                         i, info->busyluns[i], i,
 216                         info->device[i].disconnect_ok, info->device[i].stp,
 217                         info->device[i].sof, info->device[i].sync_state);
 218         }
 219         printk("    dma={ transfer_type=%X setup=%p pseudo=%p stop=%p }\n",
 220                 info->dma.transfer_type, info->dma.setup,
 221                 info->dma.pseudo, info->dma.stop);
 222         printk("    internal_done=%X magic_end=%lX }\n",
 223                 info->internal_done, info->magic_end);
 224 }
 225
 226 static void __fas216_checkmagic(FAS216_Info *info, const char *func)
 227 {
 228         int corruption = 0;
 229         if (info->magic_start != MAGIC) {
 230                 printk(KERN_CRIT "FAS216 Error: magic at start corrupted\n");
 231                 corruption++;
 232         }
 233         if (info->magic_end != MAGIC) {
 234                 printk(KERN_CRIT "FAS216 Error: magic at end corrupted\n");
 235                 corruption++;
 236         }
 237         if (corruption) {
 238                 fas216_dumpinfo(info);
 239                 panic("scsi memory space corrupted in %s", func);
 240         }
 241 }
 242 #define fas216_checkmagic(info) __fas216_checkmagic((info), __func__)
 243 #else
 244 #define fas216_checkmagic(info)
 245 #endif
 246
 247 static const char *fas216_bus_phase(int stat)
 248 {
 249         static const char *phases[] = {
 250                 "DATA OUT", "DATA IN",
 251                 "COMMAND", "STATUS",
 252                 "MISC OUT", "MISC IN",
 253                 "MESG OUT", "MESG IN"
 254         };
 255
 256         return phases[stat & STAT_BUSMASK];
 257 }
 258
 259 static const char *fas216_drv_phase(FAS216_Info *info)
 260 {
 261         static const char *phases[] = {
 262                 [PHASE_IDLE]            = "idle",
 263                 [PHASE_SELECTION]       = "selection",
 264                 [PHASE_COMMAND]         = "command",
 265                 [PHASE_DATAOUT]         = "data out",
 266                 [PHASE_DATAIN]          = "data in",
 267                 [PHASE_MSGIN]           = "message in",
 268                 [PHASE_MSGIN_DISCONNECT]= "disconnect",
 269                 [PHASE_MSGOUT_EXPECT]   = "expect message out",
 270                 [PHASE_MSGOUT]          = "message out",
 271                 [PHASE_STATUS]          = "status",
 272                 [PHASE_DONE]            = "done",
 273         };
 274
 275         if (info->scsi.phase < ARRAY_SIZE(phases) &&
 276             phases[info->scsi.phase])
 277                 return phases[info->scsi.phase];
 278         return "???";
 279 }
 280
 281 static char fas216_target(FAS216_Info *info)
 282 {
 283         if (info->SCpnt)
 284                 return '0' + info->SCpnt->device->id;
 285         else
 286                 return 'H';
 287 }
 288
 289 static void
 290 fas216_do_log(FAS216_Info *info, char target, char *fmt, va_list ap)
 291 {
 292         static char buf[1024];
 293
 294         vsnprintf(buf, sizeof(buf), fmt, ap);
 295         printk("scsi%d.%c: %s", info->host->host_no, target, buf);
 296 }
 297
 298 static void fas216_log_command(FAS216_Info *info, int level,
 299                                struct scsi_cmnd *SCpnt, char *fmt, ...)
 300 {
 301         va_list args;
 302
 303         if (level != 0 && !(level & level_mask))
 304                 return;
 305
 306         va_start(args, fmt);
 307         fas216_do_log(info, '0' + SCpnt->device->id, fmt, args);
 308         va_end(args);
 309
 310         scsi_print_command(SCpnt);
 311 }
 312
 313 static void
 314 fas216_log_target(FAS216_Info *info, int level, int target, char *fmt, ...)
 315 {
 316         va_list args;
 317
 318         if (level != 0 && !(level & level_mask))
 319                 return;
 320
 321         if (target < 0)
 322                 target = 'H';
 323         else
 324                 target += '0';
 325
 326         va_start(args, fmt);
 327         fas216_do_log(info, target, fmt, args);
 328         va_end(args);
 329
 330         printk("\n");
 331 }
 332
 333 static void fas216_log(FAS216_Info *info, int level, char *fmt, ...)
 334 {
 335         va_list args;
 336
 337         if (level != 0 && !(level & level_mask))
 338                 return;
 339
 340         va_start(args, fmt);
 341         fas216_do_log(info, fas216_target(info), fmt, args);
 342         va_end(args);
 343
 344         printk("\n");
 345 }
 346
 347 #define PH_SIZE 32
 348
 349 static struct { int stat, ssr, isr, ph; } ph_list[PH_SIZE];
 350 static int ph_ptr;
 351
 352 static void add_debug_list(int stat, int ssr, int isr, int ph)
 353 {
 354         ph_list[ph_ptr].stat = stat;
 355         ph_list[ph_ptr].ssr = ssr;
 356         ph_list[ph_ptr].isr = isr;
 357         ph_list[ph_ptr].ph = ph;
 358
 359         ph_ptr = (ph_ptr + 1) & (PH_SIZE-1);
 360 }
 361
 362 static struct { int command; void *from; } cmd_list[8];
 363 static int cmd_ptr;
 364
 365 static void fas216_cmd(FAS216_Info *info, unsigned int command)
 366 {
 367         cmd_list[cmd_ptr].command = command;
 368         cmd_list[cmd_ptr].from = __builtin_return_address(0);
 369
 370         cmd_ptr = (cmd_ptr + 1) & 7;
 371
 372         fas216_writeb(info, REG_CMD, command);
 373 }
 374
 375 static void print_debug_list(void)
 376 {
 377         int i;
 378
 379         i = ph_ptr;
 380
 381         printk(KERN_ERR "SCSI IRQ trail\n");
 382         do {
 383                 printk(" %02x:%02x:%02x:%1x",
 384                         ph_list[i].stat, ph_list[i].ssr,
 385                         ph_list[i].isr, ph_list[i].ph);
 386                 i = (i + 1) & (PH_SIZE - 1);
 387                 if (((i ^ ph_ptr) & 7) == 0)
 388                         printk("\n");
 389         } while (i != ph_ptr);
 390         if ((i ^ ph_ptr) & 7)
 391                 printk("\n");
 392
 393         i = cmd_ptr;
 394         printk(KERN_ERR "FAS216 commands: ");
 395         do {
 396                 printk("%02x:%p ", cmd_list[i].command, cmd_list[i].from);
 397                 i = (i + 1) & 7;
 398         } while (i != cmd_ptr);
 399         printk("\n");
 400 }
 401
 402 static void fas216_done(FAS216_Info *info, unsigned int result);
 403
 404 /**
 405  * fas216_get_last_msg - retrive last message from the list
 406  * @info: interface to search
 407  * @pos: current fifo position
 408  *
 409  * Retrieve a last message from the list, using position in fifo.
 410  */
 411 static inline unsigned short
 412 fas216_get_last_msg(FAS216_Info *info, int pos)
 413 {
 414         unsigned short packed_msg = NOP;
 415         struct message *msg;
 416         int msgnr = 0;
 417
 418         while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
 419                 if (pos >= msg->fifo)
 420                         break;
 421         }
 422
 423         if (msg) {
 424                 if (msg->msg[0] == EXTENDED_MESSAGE)
 425                         packed_msg = EXTENDED_MESSAGE | msg->msg[2] << 8;
 426                 else
 427                         packed_msg = msg->msg[0];
 428         }
 429
 430         fas216_log(info, LOG_MESSAGES,
 431                 "Message: %04x found at position %02x\n", packed_msg, pos);
 432
 433         return packed_msg;
 434 }
 435
 436 /**
 437  * fas216_syncperiod - calculate STP register value
 438  * @info: state structure for interface connected to device
 439  * @ns: period in ns (between subsequent bytes)
 440  *
 441  * Calculate value to be loaded into the STP register for a given period
 442  * in ns. Returns a value suitable for REG_STP.
 443  */
 444 static int fas216_syncperiod(FAS216_Info *info, int ns)
 445 {
 446         int value = (info->ifcfg.clockrate * ns) / 1000;
 447
 448         fas216_checkmagic(info);
 449
 450         if (value < 4)
 451                 value = 4;
 452         else if (value > 35)
 453                 value = 35;
 454
 455         return value & 31;
 456 }
 457
 458 /**
 459  * fas216_set_sync - setup FAS216 chip for specified transfer period.
 460  * @info: state structure for interface connected to device
 461  * @target: target
 462  *
 463  * Correctly setup FAS216 chip for specified transfer period.
 464  * Notes   : we need to switch the chip out of FASTSCSI mode if we have
 465  *           a transfer period >= 200ns - otherwise the chip will violate
 466  *           the SCSI timings.
 467  */
 468 static void fas216_set_sync(FAS216_Info *info, int target)
 469 {
 470         unsigned int cntl3;
 471
 472         fas216_writeb(info, REG_SOF, info->device[target].sof);
 473         fas216_writeb(info, REG_STP, info->device[target].stp);
 474
 475         cntl3 = info->scsi.cfg[2];
 476         if (info->device[target].period >= (200 / 4))
 477                 cntl3 = cntl3 & ~CNTL3_FASTSCSI;
 478
 479         fas216_writeb(info, REG_CNTL3, cntl3);
 480 }
 481
 482 /* Synchronous transfer support
 483  *
 484  * Note: The SCSI II r10 spec says (5.6.12):
 485  *
 486  *  (2)  Due to historical problems with early host adapters that could
 487  *  not accept an SDTR message, some targets may not initiate synchronous
 488  *  negotiation after a power cycle as required by this standard.  Host
 489  *  adapters that support synchronous mode may avoid the ensuing failure
 490  *  modes when the target is independently power cycled by initiating a
 491  *  synchronous negotiation on each REQUEST SENSE and INQUIRY command.
 492  *  This approach increases the SCSI bus overhead and is not recommended
 493  *  for new implementations.  The correct method is to respond to an
 494  *  SDTR message with a MESSAGE REJECT message if the either the
 495  *  initiator or target devices does not support synchronous transfers
 496  *  or does not want to negotiate for synchronous transfers at the time.
 497  *  Using the correct method assures compatibility with wide data
 498  *  transfers and future enhancements.
 499  *
 500  * We will always initiate a synchronous transfer negotiation request on
 501  * every INQUIRY or REQUEST SENSE message, unless the target itself has
 502  * at some point performed a synchronous transfer negotiation request, or
 503  * we have synchronous transfers disabled for this device.
 504  */
 505
 506 /**
 507  * fas216_handlesync - Handle a synchronous transfer message
 508  * @info: state structure for interface
 509  * @msg: message from target
 510  *
 511  * Handle a synchronous transfer message from the target
 512  */
 513 static void fas216_handlesync(FAS216_Info *info, char *msg)
 514 {
 515         struct fas216_device *dev = &info->device[info->SCpnt->device->id];
 516         enum { sync, async, none, reject } res = none;
 517
 518 #ifdef SCSI2_SYNC
 519         switch (msg[0]) {
 520         case MESSAGE_REJECT:
 521                 /* Synchronous transfer request failed.
 522                  * Note: SCSI II r10:
 523                  *
 524                  *  SCSI devices that are capable of synchronous
 525                  *  data transfers shall not respond to an SDTR
 526                  *  message with a MESSAGE REJECT message.
 527                  *
 528                  * Hence, if we get this condition, we disable
 529                  * negotiation for this device.
 530                  */
 531                 if (dev->sync_state == neg_inprogress) {
 532                         dev->sync_state = neg_invalid;
 533                         res = async;
 534                 }
 535                 break;
 536
 537         case EXTENDED_MESSAGE:
 538                 switch (dev->sync_state) {
 539                 /* We don't accept synchronous transfer requests.
 540                  * Respond with a MESSAGE_REJECT to prevent a
 541                  * synchronous transfer agreement from being reached.
 542                  */
 543                 case neg_invalid:
 544                         res = reject;
 545                         break;
 546
 547                 /* We were not negotiating a synchronous transfer,
 548                  * but the device sent us a negotiation request.
 549                  * Honour the request by sending back a SDTR
 550                  * message containing our capability, limited by
 551                  * the targets capability.
 552                  */
 553                 default:
 554                         fas216_cmd(info, CMD_SETATN);
 555                         if (msg[4] > info->ifcfg.sync_max_depth)
 556                                 msg[4] = info->ifcfg.sync_max_depth;
 557                         if (msg[3] < 1000 / info->ifcfg.clockrate)
 558                                 msg[3] = 1000 / info->ifcfg.clockrate;
 559
 560                         msgqueue_flush(&info->scsi.msgs);
 561                         msgqueue_addmsg(&info->scsi.msgs, 5,
 562                                         EXTENDED_MESSAGE, 3, EXTENDED_SDTR,
 563                                         msg[3], msg[4]);
 564                         info->scsi.phase = PHASE_MSGOUT_EXPECT;
 565
 566                         /* This is wrong.  The agreement is not in effect
 567                          * until this message is accepted by the device
 568                          */
 569                         dev->sync_state = neg_targcomplete;
 570                         res = sync;
 571                         break;
 572
 573                 /* We initiated the synchronous transfer negotiation,
 574                  * and have successfully received a response from the
 575                  * target.  The synchronous transfer agreement has been
 576                  * reached.  Note: if the values returned are out of our
 577                  * bounds, we must reject the message.
 578                  */
 579                 case neg_inprogress:
 580                         res = reject;
 581                         if (msg[4] <= info->ifcfg.sync_max_depth &&
 582                             msg[3] >= 1000 / info->ifcfg.clockrate) {
 583                                 dev->sync_state = neg_complete;
 584                                 res = sync;
 585                         }
 586                         break;
 587                 }
 588         }
 589 #else
 590         res = reject;
 591 #endif
 592
 593         switch (res) {
 594         case sync:
 595                 dev->period = msg[3];
 596                 dev->sof    = msg[4];
 597                 dev->stp    = fas216_syncperiod(info, msg[3] * 4);
 598                 fas216_set_sync(info, info->SCpnt->device->id);
 599                 break;
 600
 601         case reject:
 602                 fas216_cmd(info, CMD_SETATN);
 603                 msgqueue_flush(&info->scsi.msgs);
 604                 msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT);
 605                 info->scsi.phase = PHASE_MSGOUT_EXPECT;
 606                 fallthrough;
 607
 608         case async:
 609                 dev->period = info->ifcfg.asyncperiod / 4;
 610                 dev->sof    = 0;
 611                 dev->stp    = info->scsi.async_stp;
 612                 fas216_set_sync(info, info->SCpnt->device->id);
 613                 break;
 614
 615         case none:
 616                 break;
 617         }
 618 }
 619
 620 /**
 621  * fas216_updateptrs - update data pointers after transfer suspended/paused
 622  * @info: interface's local pointer to update
 623  * @bytes_transferred: number of bytes transferred
 624  *
 625  * Update data pointers after transfer suspended/paused
 626  */
 627 static void fas216_updateptrs(FAS216_Info *info, int bytes_transferred)
 628 {
 629         struct scsi_pointer *SCp = &info->scsi.SCp;
 630
 631         fas216_checkmagic(info);
 632
 633         BUG_ON(bytes_transferred < 0);
 634
 635         SCp->phase -= bytes_transferred;
 636
 637         while (bytes_transferred != 0) {
 638                 if (SCp->this_residual > bytes_transferred)
 639                         break;
 640                 /*
 641                  * We have used up this buffer.  Move on to the
 642                  * next buffer.
 643                  */
 644                 bytes_transferred -= SCp->this_residual;
 645                 if (!next_SCp(SCp) && bytes_transferred) {
 646                         printk(KERN_WARNING "scsi%d.%c: out of buffers\n",
 647                                 info->host->host_no, '0' + info->SCpnt->device->id);
 648                         return;
 649                 }
 650         }
 651
 652         SCp->this_residual -= bytes_transferred;
 653         if (SCp->this_residual)
 654                 SCp->ptr += bytes_transferred;
 655         else
 656                 SCp->ptr = NULL;
 657 }
 658
 659 /**
 660  * fas216_pio - transfer data off of/on to card using programmed IO
 661  * @info: interface to transfer data to/from
 662  * @direction: direction to transfer data (DMA_OUT/DMA_IN)
 663  *
 664  * Transfer data off of/on to card using programmed IO.
 665  * Notes: this is incredibly slow.
 666  */
 667 static void fas216_pio(FAS216_Info *info, fasdmadir_t direction)
 668 {
 669         struct scsi_pointer *SCp = &info->scsi.SCp;
 670
 671         fas216_checkmagic(info);
 672
 673         if (direction == DMA_OUT)
 674                 fas216_writeb(info, REG_FF, get_next_SCp_byte(SCp));
 675         else
 676                 put_next_SCp_byte(SCp, fas216_readb(info, REG_FF));
 677
 678         if (SCp->this_residual == 0)
 679                 next_SCp(SCp);
 680 }
 681
 682 static void fas216_set_stc(FAS216_Info *info, unsigned int length)
 683 {
 684         fas216_writeb(info, REG_STCL, length);
 685         fas216_writeb(info, REG_STCM, length >> 8);
 686         fas216_writeb(info, REG_STCH, length >> 16);
 687 }
 688
 689 static unsigned int fas216_get_ctc(FAS216_Info *info)
 690 {
 691         return fas216_readb(info, REG_CTCL) +
 692                (fas216_readb(info, REG_CTCM) << 8) +
 693                (fas216_readb(info, REG_CTCH) << 16);
 694 }
 695
 696 /**
 697  * fas216_cleanuptransfer - clean up after a transfer has completed.
 698  * @info: interface to clean up
 699  *
 700  * Update the data pointers according to the number of bytes transferred
 701  * on the SCSI bus.
 702  */
 703 static void fas216_cleanuptransfer(FAS216_Info *info)
 704 {
 705         unsigned long total, residual, fifo;
 706         fasdmatype_t dmatype = info->dma.transfer_type;
 707
 708         info->dma.transfer_type = fasdma_none;
 709
 710         /*
 711          * PIO transfers do not need to be cleaned up.
 712          */
 713         if (dmatype == fasdma_pio || dmatype == fasdma_none)
 714                 return;
 715
 716         if (dmatype == fasdma_real_all)
 717                 total = info->scsi.SCp.phase;
 718         else
 719                 total = info->scsi.SCp.this_residual;
 720
 721         residual = fas216_get_ctc(info);
 722
 723         fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
 724
 725         fas216_log(info, LOG_BUFFER, "cleaning up from previous "
 726                    "transfer: length 0x%06x, residual 0x%x, fifo %d",
 727                    total, residual, fifo);
 728
 729         /*
 730          * If we were performing Data-Out, the transfer counter
 731          * counts down each time a byte is transferred by the
 732          * host to the FIFO.  This means we must include the
 733          * bytes left in the FIFO from the transfer counter.
 734          */
 735         if (info->scsi.phase == PHASE_DATAOUT)
 736                 residual += fifo;
 737
 738         fas216_updateptrs(info, total - residual);
 739 }
 740
 741 /**
 742  * fas216_transfer - Perform a DMA/PIO transfer off of/on to card
 743  * @info: interface from which device disconnected from
 744  *
 745  * Start a DMA/PIO transfer off of/on to card
 746  */
 747 static void fas216_transfer(FAS216_Info *info)
 748 {
 749         fasdmadir_t direction;
 750         fasdmatype_t dmatype;
 751
 752         fas216_log(info, LOG_BUFFER,
 753                    "starttransfer: buffer %p length 0x%06x reqlen 0x%06x",
 754                    info->scsi.SCp.ptr, info->scsi.SCp.this_residual,
 755                    info->scsi.SCp.phase);
 756
 757         if (!info->scsi.SCp.ptr) {
 758                 fas216_log(info, LOG_ERROR, "null buffer passed to "
 759                            "fas216_starttransfer");
 760                 print_SCp(&info->scsi.SCp, "SCp: ", "\n");
 761                 print_SCp(&info->SCpnt->SCp, "Cmnd SCp: ", "\n");
 762                 return;
 763         }
 764
 765         /*
 766          * If we have a synchronous transfer agreement in effect, we must
 767          * use DMA mode.  If we are using asynchronous transfers, we may
 768          * use DMA mode or PIO mode.
 769          */
 770         if (info->device[info->SCpnt->device->id].sof)
 771                 dmatype = fasdma_real_all;
 772         else
 773                 dmatype = fasdma_pio;
 774
 775         if (info->scsi.phase == PHASE_DATAOUT)
 776                 direction = DMA_OUT;
 777         else
 778                 direction = DMA_IN;
 779
 780         if (info->dma.setup)
 781                 dmatype = info->dma.setup(info->host, &info->scsi.SCp,
 782                                           direction, dmatype);
 783         info->dma.transfer_type = dmatype;
 784
 785         if (dmatype == fasdma_real_all)
 786                 fas216_set_stc(info, info->scsi.SCp.phase);
 787         else
 788                 fas216_set_stc(info, info->scsi.SCp.this_residual);
 789
 790         switch (dmatype) {
 791         case fasdma_pio:
 792                 fas216_log(info, LOG_BUFFER, "PIO transfer");
 793                 fas216_writeb(info, REG_SOF, 0);
 794                 fas216_writeb(info, REG_STP, info->scsi.async_stp);
 795                 fas216_cmd(info, CMD_TRANSFERINFO);
 796                 fas216_pio(info, direction);
 797                 break;
 798
 799         case fasdma_pseudo:
 800                 fas216_log(info, LOG_BUFFER, "pseudo transfer");
 801                 fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA);
 802                 info->dma.pseudo(info->host, &info->scsi.SCp,
 803                                  direction, info->SCpnt->transfersize);
 804                 break;
 805
 806         case fasdma_real_block:
 807                 fas216_log(info, LOG_BUFFER, "block dma transfer");
 808                 fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA);
 809                 break;
 810
 811         case fasdma_real_all:
 812                 fas216_log(info, LOG_BUFFER, "total dma transfer");
 813                 fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA);
 814                 break;
 815
 816         default:
 817                 fas216_log(info, LOG_BUFFER | LOG_ERROR,
 818                            "invalid FAS216 DMA type");
 819                 break;
 820         }
 821 }
 822
 823 /**
 824  * fas216_stoptransfer - Stop a DMA transfer onto / off of the card
 825  * @info: interface from which device disconnected from
 826  *
 827  * Called when we switch away from DATA IN or DATA OUT phases.
 828  */
 829 static void fas216_stoptransfer(FAS216_Info *info)
 830 {
 831         fas216_checkmagic(info);
 832
 833         if (info->dma.transfer_type == fasdma_real_all ||
 834             info->dma.transfer_type == fasdma_real_block)
 835                 info->dma.stop(info->host, &info->scsi.SCp);
 836
 837         fas216_cleanuptransfer(info);
 838
 839         if (info->scsi.phase == PHASE_DATAIN) {
 840                 unsigned int fifo;
 841
 842                 /*
 843                  * If we were performing Data-In, then the FIFO counter
 844                  * contains the number of bytes not transferred via DMA
 845                  * from the on-board FIFO.  Read them manually.
 846                  */
 847                 fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
 848                 while (fifo && info->scsi.SCp.ptr) {
 849                         *info->scsi.SCp.ptr = fas216_readb(info, REG_FF);
 850                         fas216_updateptrs(info, 1);
 851                         fifo--;
 852                 }
 853         } else {
 854                 /*
 855                  * After a Data-Out phase, there may be unsent
 856                  * bytes left in the FIFO.  Flush them out.
 857                  */
 858                 fas216_cmd(info, CMD_FLUSHFIFO);
 859         }
 860 }
 861
 862 static void fas216_aborttransfer(FAS216_Info *info)
 863 {
 864         fas216_checkmagic(info);
 865
 866         if (info->dma.transfer_type == fasdma_real_all ||
 867             info->dma.transfer_type == fasdma_real_block)
 868                 info->dma.stop(info->host, &info->scsi.SCp);
 869
 870         info->dma.transfer_type = fasdma_none;
 871         fas216_cmd(info, CMD_FLUSHFIFO);
 872 }
 873
 874 static void fas216_kick(FAS216_Info *info);
 875
 876 /**
 877  * fas216_disconnected_intr - handle device disconnection
 878  * @info: interface from which device disconnected from
 879  *
 880  * Handle device disconnection
 881  */
 882 static void fas216_disconnect_intr(FAS216_Info *info)
 883 {
 884         unsigned long flags;
 885
 886         fas216_checkmagic(info);
 887
 888         fas216_log(info, LOG_CONNECT, "disconnect phase=%02x",
 889                    info->scsi.phase);
 890
 891         msgqueue_flush(&info->scsi.msgs);
 892
 893         switch (info->scsi.phase) {
 894         case PHASE_SELECTION:                   /* while selecting - no target          */
 895         case PHASE_SELSTEPS:
 896                 fas216_done(info, DID_NO_CONNECT);
 897                 break;
 898
 899         case PHASE_MSGIN_DISCONNECT:            /* message in - disconnecting           */
 900                 info->scsi.disconnectable = 1;
 901                 info->scsi.phase = PHASE_IDLE;
 902                 info->stats.disconnects += 1;
 903                 spin_lock_irqsave(&info->host_lock, flags);
 904                 if (info->scsi.phase == PHASE_IDLE)
 905                         fas216_kick(info);
 906                 spin_unlock_irqrestore(&info->host_lock, flags);
 907                 break;
 908
 909         case PHASE_DONE:                        /* at end of command - complete         */
 910                 fas216_done(info, DID_OK);
 911                 break;
 912
 913         case PHASE_MSGOUT:                      /* message out - possible ABORT message */
 914                 if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) {
 915                         info->scsi.aborting = 0;
 916                         fas216_done(info, DID_ABORT);
 917                         break;
 918                 }
 919                 fallthrough;
 920
 921         default:                                /* huh?                                 */
 922                 printk(KERN_ERR "scsi%d.%c: unexpected disconnect in phase %s\n",
 923                         info->host->host_no, fas216_target(info), fas216_drv_phase(info));
 924                 print_debug_list();
 925                 fas216_stoptransfer(info);
 926                 fas216_done(info, DID_ERROR);
 927                 break;
 928         }
 929 }
 930
 931 /**
 932  * fas216_reselected_intr - start reconnection of a device
 933  * @info: interface which was reselected
 934  *
 935  * Start reconnection of a device
 936  */
 937 static void
 938 fas216_reselected_intr(FAS216_Info *info)
 939 {
 940         unsigned int cfis, i;
 941         unsigned char msg[4];
 942         unsigned char target, lun, tag;
 943
 944         fas216_checkmagic(info);
 945
 946         WARN_ON(info->scsi.phase == PHASE_SELECTION ||
 947                 info->scsi.phase == PHASE_SELSTEPS);
 948
 949         cfis = fas216_readb(info, REG_CFIS);
 950
 951         fas216_log(info, LOG_CONNECT, "reconnect phase=%02x cfis=%02x",
 952                    info->scsi.phase, cfis);
 953
 954         cfis &= CFIS_CF;
 955
 956         if (cfis < 2 || cfis > 4) {
 957                 printk(KERN_ERR "scsi%d.H: incorrect number of bytes after reselect\n",
 958                         info->host->host_no);
 959                 goto bad_message;
 960         }
 961
 962         for (i = 0; i < cfis; i++)
 963                 msg[i] = fas216_readb(info, REG_FF);
 964
 965         if (!(msg[0] & (1 << info->host->this_id)) ||
 966             !(msg[1] & 0x80))
 967                 goto initiator_error;
 968
 969         target = msg[0] & ~(1 << info->host->this_id);
 970         target = ffs(target) - 1;
 971         lun = msg[1] & 7;
 972         tag = 0;
 973
 974         if (cfis >= 3) {
 975                 if (msg[2] != SIMPLE_QUEUE_TAG)
 976                         goto initiator_error;
 977
 978                 tag = msg[3];
 979         }
 980
 981         /* set up for synchronous transfers */
 982         fas216_writeb(info, REG_SDID, target);
 983         fas216_set_sync(info, target);
 984         msgqueue_flush(&info->scsi.msgs);
 985
 986         fas216_log(info, LOG_CONNECT, "Reconnected: target %1x lun %1x tag %02x",
 987                    target, lun, tag);
 988
 989         if (info->scsi.disconnectable && info->SCpnt) {
 990                 info->scsi.disconnectable = 0;
 991                 if (info->SCpnt->device->id  == target &&
 992                     info->SCpnt->device->lun == lun &&
 993                     info->SCpnt->tag         == tag) {
 994                         fas216_log(info, LOG_CONNECT, "reconnected previously executing command");
 995                 } else {
 996                         queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt);
 997                         fas216_log(info, LOG_CONNECT, "had to move command to disconnected queue");
 998                         info->SCpnt = NULL;
 999                 }
1000         }
1001         if (!info->SCpnt) {
1002                 info->SCpnt = queue_remove_tgtluntag(&info->queues.disconnected,
1003                                         target, lun, tag);
1004                 fas216_log(info, LOG_CONNECT, "had to get command");
1005         }
1006
1007         if (info->SCpnt) {
1008                 /*
1009                  * Restore data pointer from SAVED data pointer
1010                  */
1011                 info->scsi.SCp = info->SCpnt->SCp;
1012
1013                 fas216_log(info, LOG_CONNECT, "data pointers: [%p, %X]",
1014                         info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
1015                 info->scsi.phase = PHASE_MSGIN;
1016         } else {
1017                 /*
1018                  * Our command structure not found - abort the
1019                  * command on the target.  Since we have no
1020                  * record of this command, we can't send
1021                  * an INITIATOR DETECTED ERROR message.
1022                  */
1023                 fas216_cmd(info, CMD_SETATN);
1024
1025 #if 0
1026                 if (tag)
1027                         msgqueue_addmsg(&info->scsi.msgs, 2, ABORT_TAG, tag);
1028                 else
1029 #endif
1030                         msgqueue_addmsg(&info->scsi.msgs, 1, ABORT);
1031                 info->scsi.phase = PHASE_MSGOUT_EXPECT;
1032                 info->scsi.aborting = 1;
1033         }
1034
1035         fas216_cmd(info, CMD_MSGACCEPTED);
1036         return;
1037
1038  initiator_error:
1039         printk(KERN_ERR "scsi%d.H: error during reselection: bytes",
1040                 info->host->host_no);
1041         for (i = 0; i < cfis; i++)
1042                 printk(" %02x", msg[i]);
1043         printk("\n");
1044  bad_message:
1045         fas216_cmd(info, CMD_SETATN);
1046         msgqueue_flush(&info->scsi.msgs);
1047         msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR);
1048         info->scsi.phase = PHASE_MSGOUT_EXPECT;
1049         fas216_cmd(info, CMD_MSGACCEPTED);
1050 }
1051
1052 static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int msglen)
1053 {
1054         int i;
1055
1056         switch (message[0]) {
1057         case COMMAND_COMPLETE:
1058                 if (msglen != 1)
1059                         goto unrecognised;
1060
1061                 printk(KERN_ERR "scsi%d.%c: command complete with no "
1062                         "status in MESSAGE_IN?\n",
1063                         info->host->host_no, fas216_target(info));
1064                 break;
1065
1066         case SAVE_POINTERS:
1067                 if (msglen != 1)
1068                         goto unrecognised;
1069
1070                 /*
1071                  * Save current data pointer to SAVED data pointer
1072                  * SCSI II standard says that we must not acknowledge
1073                  * this until we have really saved pointers.
1074                  * NOTE: we DO NOT save the command nor status pointers
1075                  * as required by the SCSI II standard.  These always
1076                  * point to the start of their respective areas.
1077                  */
1078                 info->SCpnt->SCp = info->scsi.SCp;
1079                 info->SCpnt->SCp.sent_command = 0;
1080                 fas216_log(info, LOG_CONNECT | LOG_MESSAGES | LOG_BUFFER,
1081                         "save data pointers: [%p, %X]",
1082                         info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
1083                 break;
1084
1085         case RESTORE_POINTERS:
1086                 if (msglen != 1)
1087                         goto unrecognised;
1088
1089                 /*
1090                  * Restore current data pointer from SAVED data pointer
1091                  */
1092                 info->scsi.SCp = info->SCpnt->SCp;
1093                 fas216_log(info, LOG_CONNECT | LOG_MESSAGES | LOG_BUFFER,
1094                         "restore data pointers: [%p, 0x%x]",
1095                         info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
1096                 break;
1097
1098         case DISCONNECT:
1099                 if (msglen != 1)
1100                         goto unrecognised;
1101
1102                 info->scsi.phase = PHASE_MSGIN_DISCONNECT;
1103                 break;
1104
1105         case MESSAGE_REJECT:
1106                 if (msglen != 1)
1107                         goto unrecognised;
1108
1109                 switch (fas216_get_last_msg(info, info->scsi.msgin_fifo)) {
1110                 case EXTENDED_MESSAGE | EXTENDED_SDTR << 8:
1111                         fas216_handlesync(info, message);
1112                         break;
1113
1114                 default:
1115                         fas216_log(info, 0, "reject, last message 0x%04x",
1116                                 fas216_get_last_msg(info, info->scsi.msgin_fifo));
1117                 }
1118                 break;
1119
1120         case NOP:
1121                 break;
1122
1123         case EXTENDED_MESSAGE:
1124                 if (msglen < 3)
1125                         goto unrecognised;
1126
1127                 switch (message[2]) {
1128                 case EXTENDED_SDTR:     /* Sync transfer negotiation request/reply */
1129                         fas216_handlesync(info, message);
1130                         break;
1131
1132                 default:
1133                         goto unrecognised;
1134                 }
1135                 break;
1136
1137         default:
1138                 goto unrecognised;
1139         }
1140         return;
1141
1142 unrecognised:
1143         fas216_log(info, 0, "unrecognised message, rejecting");
1144         printk("scsi%d.%c: message was", info->host->host_no, fas216_target(info));
1145         for (i = 0; i < msglen; i++)
1146                 printk("%s%02X", i & 31 ? " " : "\n  ", message[i]);
1147         printk("\n");
1148
1149         /*
1150          * Something strange seems to be happening here -
1151          * I can't use SETATN since the chip gives me an
1152          * invalid command interrupt when I do.  Weird.
1153          */
1154 fas216_cmd(info, CMD_NOP);
1155 fas216_dumpstate(info);
1156         fas216_cmd(info, CMD_SETATN);
1157         msgqueue_flush(&info->scsi.msgs);
1158         msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT);
1159         info->scsi.phase = PHASE_MSGOUT_EXPECT;
1160 fas216_dumpstate(info);
1161 }
1162
1163 static int fas216_wait_cmd(FAS216_Info *info, int cmd)
1164 {
1165         int tout;
1166         int stat;
1167
1168         fas216_cmd(info, cmd);
1169
1170         for (tout = 1000; tout; tout -= 1) {
1171                 stat = fas216_readb(info, REG_STAT);
1172                 if (stat & (STAT_INT|STAT_PARITYERROR))
1173                         break;
1174                 udelay(1);
1175         }
1176
1177         return stat;
1178 }
1179
1180 static int fas216_get_msg_byte(FAS216_Info *info)
1181 {
1182         unsigned int stat = fas216_wait_cmd(info, CMD_MSGACCEPTED);
1183
1184         if ((stat & STAT_INT) == 0)
1185                 goto timedout;
1186
1187         if ((stat & STAT_BUSMASK) != STAT_MESGIN)
1188                 goto unexpected_phase_change;
1189
1190         fas216_readb(info, REG_INST);
1191
1192         stat = fas216_wait_cmd(info, CMD_TRANSFERINFO);
1193
1194         if ((stat & STAT_INT) == 0)
1195                 goto timedout;
1196
1197         if (stat & STAT_PARITYERROR)
1198                 goto parity_error;
1199
1200         if ((stat & STAT_BUSMASK) != STAT_MESGIN)
1201                 goto unexpected_phase_change;
1202
1203         fas216_readb(info, REG_INST);
1204
1205         return fas216_readb(info, REG_FF);
1206
1207 timedout:
1208         fas216_log(info, LOG_ERROR, "timed out waiting for message byte");
1209         return -1;
1210
1211 unexpected_phase_change:
1212         fas216_log(info, LOG_ERROR, "unexpected phase change: status = %02x", stat);
1213         return -2;
1214
1215 parity_error:
1216         fas216_log(info, LOG_ERROR, "parity error during message in phase");
1217         return -3;
1218 }
1219
1220 /**
1221  * fas216_message - handle a function done interrupt from FAS216 chip
1222  * @info: interface which caused function done interrupt
1223  *
1224  * Handle a function done interrupt from FAS216 chip
1225  */
1226 static void fas216_message(FAS216_Info *info)
1227 {
1228         unsigned char *message = info->scsi.message;
1229         unsigned int msglen = 1;
1230         int msgbyte = 0;
1231
1232         fas216_checkmagic(info);
1233
1234         message[0] = fas216_readb(info, REG_FF);
1235
1236         if (message[0] == EXTENDED_MESSAGE) {
1237                 msgbyte = fas216_get_msg_byte(info);
1238
1239                 if (msgbyte >= 0) {
1240                         message[1] = msgbyte;
1241
1242                         for (msglen = 2; msglen < message[1] + 2; msglen++) {
1243                                 msgbyte = fas216_get_msg_byte(info);
1244
1245                                 if (msgbyte >= 0)
1246                                         message[msglen] = msgbyte;
1247                                 else
1248                                         break;
1249                         }
1250                 }
1251         }
1252
1253         if (msgbyte == -3)
1254                 goto parity_error;
1255
1256 #ifdef DEBUG_MESSAGES
1257         {
1258                 int i;
1259
1260                 printk("scsi%d.%c: message in: ",
1261                         info->host->host_no, fas216_target(info));
1262                 for (i = 0; i < msglen; i++)
1263                         printk("%02X ", message[i]);
1264                 printk("\n");
1265         }
1266 #endif
1267
1268         fas216_parse_message(info, message, msglen);
1269         fas216_cmd(info, CMD_MSGACCEPTED);
1270         return;
1271
1272 parity_error:
1273         fas216_cmd(info, CMD_SETATN);
1274         msgqueue_flush(&info->scsi.msgs);
1275         msgqueue_addmsg(&info->scsi.msgs, 1, MSG_PARITY_ERROR);
1276         info->scsi.phase = PHASE_MSGOUT_EXPECT;
1277         fas216_cmd(info, CMD_MSGACCEPTED);
1278         return;
1279 }
1280
1281 /**
1282  * fas216_send_command - send command after all message bytes have been sent
1283  * @info: interface which caused bus service
1284  *
1285  * Send a command to a target after all message bytes have been sent
1286  */
1287 static void fas216_send_command(FAS216_Info *info)
1288 {
1289         int i;
1290
1291         fas216_checkmagic(info);
1292
1293         fas216_cmd(info, CMD_NOP|CMD_WITHDMA);
1294         fas216_cmd(info, CMD_FLUSHFIFO);
1295
1296         /* load command */
1297         for (i = info->scsi.SCp.sent_command; i < info->SCpnt->cmd_len; i++)
1298                 fas216_writeb(info, REG_FF, info->SCpnt->cmnd[i]);
1299
1300         fas216_cmd(info, CMD_TRANSFERINFO);
1301
1302         info->scsi.phase = PHASE_COMMAND;
1303 }
1304
1305 /**
1306  * fas216_send_messageout - handle bus service to send a message
1307  * @info: interface which caused bus service
1308  *
1309  * Handle bus service to send a message.
1310  * Note: We do not allow the device to change the data direction!
1311  */
1312 static void fas216_send_messageout(FAS216_Info *info, int start)
1313 {
1314         unsigned int tot_msglen = msgqueue_msglength(&info->scsi.msgs);
1315
1316         fas216_checkmagic(info);
1317
1318         fas216_cmd(info, CMD_FLUSHFIFO);
1319
1320         if (tot_msglen) {
1321                 struct message *msg;
1322                 int msgnr = 0;
1323
1324                 while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
1325                         int i;
1326
1327                         for (i = start; i < msg->length; i++)
1328                                 fas216_writeb(info, REG_FF, msg->msg[i]);
1329
1330                         msg->fifo = tot_msglen - (fas216_readb(info, REG_CFIS) & CFIS_CF);
1331                         start = 0;
1332                 }
1333         } else
1334                 fas216_writeb(info, REG_FF, NOP);
1335
1336         fas216_cmd(info, CMD_TRANSFERINFO);
1337
1338         info->scsi.phase = PHASE_MSGOUT;
1339 }
1340
1341 /**
1342  * fas216_busservice_intr - handle bus service interrupt from FAS216 chip
1343  * @info: interface which caused bus service interrupt
1344  * @stat: Status register contents
1345  * @is: SCSI Status register contents
1346  *
1347  * Handle a bus service interrupt from FAS216 chip
1348  */
1349 static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigned int is)
1350 {
1351         fas216_checkmagic(info);
1352
1353         fas216_log(info, LOG_BUSSERVICE,
1354                    "bus service: stat=%02x is=%02x phase=%02x",
1355                    stat, is, info->scsi.phase);
1356
1357         switch (info->scsi.phase) {
1358         case PHASE_SELECTION:
1359                 if ((is & IS_BITS) != IS_MSGBYTESENT)
1360                         goto bad_is;
1361                 break;
1362
1363         case PHASE_SELSTEPS:
1364                 switch (is & IS_BITS) {
1365                 case IS_SELARB:
1366                 case IS_MSGBYTESENT:
1367                         goto bad_is;
1368
1369                 case IS_NOTCOMMAND:
1370                 case IS_EARLYPHASE:
1371                         if ((stat & STAT_BUSMASK) == STAT_MESGIN)
1372                                 break;
1373                         goto bad_is;
1374
1375                 case IS_COMPLETE:
1376                         break;
1377                 }
1378
1379         default:
1380                 break;
1381         }
1382
1383         fas216_cmd(info, CMD_NOP);
1384
1385 #define STATE(st,ph) ((ph) << 3 | (st))
1386         /* This table describes the legal SCSI state transitions,
1387          * as described by the SCSI II spec.
1388          */
1389         switch (STATE(stat & STAT_BUSMASK, info->scsi.phase)) {
1390         case STATE(STAT_DATAIN, PHASE_SELSTEPS):/* Sel w/ steps -> Data In      */
1391         case STATE(STAT_DATAIN, PHASE_MSGOUT):  /* Message Out  -> Data In      */
1392         case STATE(STAT_DATAIN, PHASE_COMMAND): /* Command      -> Data In      */
1393         case STATE(STAT_DATAIN, PHASE_MSGIN):   /* Message In   -> Data In      */
1394                 info->scsi.phase = PHASE_DATAIN;
1395                 fas216_transfer(info);
1396                 return;
1397
1398         case STATE(STAT_DATAIN, PHASE_DATAIN):  /* Data In      -> Data In      */
1399         case STATE(STAT_DATAOUT, PHASE_DATAOUT):/* Data Out     -> Data Out     */
1400                 fas216_cleanuptransfer(info);
1401                 fas216_transfer(info);
1402                 return;
1403
1404         case STATE(STAT_DATAOUT, PHASE_SELSTEPS):/* Sel w/ steps-> Data Out     */
1405         case STATE(STAT_DATAOUT, PHASE_MSGOUT): /* Message Out  -> Data Out     */
1406         case STATE(STAT_DATAOUT, PHASE_COMMAND):/* Command      -> Data Out     */
1407         case STATE(STAT_DATAOUT, PHASE_MSGIN):  /* Message In   -> Data Out     */
1408                 fas216_cmd(info, CMD_FLUSHFIFO);
1409                 info->scsi.phase = PHASE_DATAOUT;
1410                 fas216_transfer(info);
1411                 return;
1412
1413         case STATE(STAT_STATUS, PHASE_DATAOUT): /* Data Out     -> Status       */
1414         case STATE(STAT_STATUS, PHASE_DATAIN):  /* Data In      -> Status       */
1415                 fas216_stoptransfer(info);
1416                 fallthrough;
1417
1418         case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status       */
1419         case STATE(STAT_STATUS, PHASE_MSGOUT):  /* Message Out  -> Status       */
1420         case STATE(STAT_STATUS, PHASE_COMMAND): /* Command      -> Status       */
1421         case STATE(STAT_STATUS, PHASE_MSGIN):   /* Message In   -> Status       */
1422                 fas216_cmd(info, CMD_INITCMDCOMPLETE);
1423                 info->scsi.phase = PHASE_STATUS;
1424                 return;
1425
1426         case STATE(STAT_MESGIN, PHASE_DATAOUT): /* Data Out     -> Message In   */
1427         case STATE(STAT_MESGIN, PHASE_DATAIN):  /* Data In      -> Message In   */
1428                 fas216_stoptransfer(info);
1429                 fallthrough;
1430
1431         case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command      -> Message In   */
1432         case STATE(STAT_MESGIN, PHASE_SELSTEPS):/* Sel w/ steps -> Message In   */
1433         case STATE(STAT_MESGIN, PHASE_MSGOUT):  /* Message Out  -> Message In   */
1434                 info->scsi.msgin_fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
1435                 fas216_cmd(info, CMD_FLUSHFIFO);
1436                 fas216_cmd(info, CMD_TRANSFERINFO);
1437                 info->scsi.phase = PHASE_MSGIN;
1438                 return;
1439
1440         case STATE(STAT_MESGIN, PHASE_MSGIN):
1441                 info->scsi.msgin_fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
1442                 fas216_cmd(info, CMD_TRANSFERINFO);
1443                 return;
1444
1445         case STATE(STAT_COMMAND, PHASE_MSGOUT): /* Message Out  -> Command      */
1446         case STATE(STAT_COMMAND, PHASE_MSGIN):  /* Message In   -> Command      */
1447                 fas216_send_command(info);
1448                 info->scsi.phase = PHASE_COMMAND;
1449                 return;
1450
1451
1452         /*
1453          * Selection    -> Message Out
1454          */
1455         case STATE(STAT_MESGOUT, PHASE_SELECTION):
1456                 fas216_send_messageout(info, 1);
1457                 return;
1458
1459         /*
1460          * Message Out  -> Message Out
1461          */
1462         case STATE(STAT_MESGOUT, PHASE_SELSTEPS):
1463         case STATE(STAT_MESGOUT, PHASE_MSGOUT):
1464                 /*
1465                  * If we get another message out phase, this usually
1466                  * means some parity error occurred.  Resend complete
1467                  * set of messages.  If we have more than one byte to
1468                  * send, we need to assert ATN again.
1469                  */
1470                 if (info->device[info->SCpnt->device->id].parity_check) {
1471                         /*
1472                          * We were testing... good, the device
1473                          * supports parity checking.
1474                          */
1475                         info->device[info->SCpnt->device->id].parity_check = 0;
1476                         info->device[info->SCpnt->device->id].parity_enabled = 1;
1477                         fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
1478                 }
1479
1480                 if (msgqueue_msglength(&info->scsi.msgs) > 1)
1481                         fas216_cmd(info, CMD_SETATN);
1482                 fallthrough;
1483
1484         /*
1485          * Any          -> Message Out
1486          */
1487         case STATE(STAT_MESGOUT, PHASE_MSGOUT_EXPECT):
1488                 fas216_send_messageout(info, 0);
1489                 return;
1490
1491         /* Error recovery rules.
1492          *   These either attempt to abort or retry the operation.
1493          * TODO: we need more of these
1494          */
1495         case STATE(STAT_COMMAND, PHASE_COMMAND):/* Command      -> Command      */
1496                 /* error - we've sent out all the command bytes
1497                  * we have.
1498                  * NOTE: we need SAVE DATA POINTERS/RESTORE DATA POINTERS
1499                  * to include the command bytes sent for this to work
1500                  * correctly.
1501                  */
1502                 printk(KERN_ERR "scsi%d.%c: "
1503                         "target trying to receive more command bytes\n",
1504                         info->host->host_no, fas216_target(info));
1505                 fas216_cmd(info, CMD_SETATN);
1506                 fas216_set_stc(info, 15);
1507                 fas216_cmd(info, CMD_PADBYTES | CMD_WITHDMA);
1508                 msgqueue_flush(&info->scsi.msgs);
1509                 msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR);
1510                 info->scsi.phase = PHASE_MSGOUT_EXPECT;
1511                 return;
1512         }
1513
1514         if (info->scsi.phase == PHASE_MSGIN_DISCONNECT) {
1515                 printk(KERN_ERR "scsi%d.%c: disconnect message received, but bus service %s?\n",
1516                         info->host->host_no, fas216_target(info),
1517                         fas216_bus_phase(stat));
1518                 msgqueue_flush(&info->scsi.msgs);
1519                 fas216_cmd(info, CMD_SETATN);
1520                 msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR);
1521                 info->scsi.phase = PHASE_MSGOUT_EXPECT;
1522                 info->scsi.aborting = 1;
1523                 fas216_cmd(info, CMD_TRANSFERINFO);
1524                 return;
1525         }
1526         printk(KERN_ERR "scsi%d.%c: bus phase %s after %s?\n",
1527                 info->host->host_no, fas216_target(info),
1528                 fas216_bus_phase(stat),
1529                 fas216_drv_phase(info));
1530         print_debug_list();
1531         return;
1532
1533 bad_is:
1534         fas216_log(info, 0, "bus service at step %d?", is & IS_BITS);
1535         fas216_dumpstate(info);
1536         print_debug_list();
1537
1538         fas216_done(info, DID_ERROR);
1539 }
1540
1541 /**
1542  * fas216_funcdone_intr - handle a function done interrupt from FAS216 chip
1543  * @info: interface which caused function done interrupt
1544  * @stat: Status register contents
1545  * @is: SCSI Status register contents
1546  *
1547  * Handle a function done interrupt from FAS216 chip
1548  */
1549 static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned int is)
1550 {
1551         unsigned int fifo_len = fas216_readb(info, REG_CFIS) & CFIS_CF;
1552
1553         fas216_checkmagic(info);
1554
1555         fas216_log(info, LOG_FUNCTIONDONE,
1556                    "function done: stat=%02x is=%02x phase=%02x",
1557                    stat, is, info->scsi.phase);
1558
1559         switch (info->scsi.phase) {
1560         case PHASE_STATUS:                      /* status phase - read status and msg   */
1561                 if (fifo_len != 2) {
1562                         fas216_log(info, 0, "odd number of bytes in FIFO: %d", fifo_len);
1563                 }
1564                 /*
1565                  * Read status then message byte.
1566                  */
1567                 info->scsi.SCp.Status = fas216_readb(info, REG_FF);
1568                 info->scsi.SCp.Message = fas216_readb(info, REG_FF);
1569                 info->scsi.phase = PHASE_DONE;
1570                 fas216_cmd(info, CMD_MSGACCEPTED);
1571                 break;
1572
1573         case PHASE_IDLE:
1574         case PHASE_SELECTION:
1575         case PHASE_SELSTEPS:
1576                 break;
1577
1578         case PHASE_MSGIN:                       /* message in phase                     */
1579                 if ((stat & STAT_BUSMASK) == STAT_MESGIN) {
1580                         info->scsi.msgin_fifo = fifo_len;
1581                         fas216_message(info);
1582                         break;
1583                 }
1584                 fallthrough;
1585
1586         default:
1587                 fas216_log(info, 0, "internal phase %s for function done?"
1588                         "  What do I do with this?",
1589                         fas216_target(info), fas216_drv_phase(info));
1590         }
1591 }
1592
1593 static void fas216_bus_reset(FAS216_Info *info)
1594 {
1595         neg_t sync_state;
1596         int i;
1597
1598         msgqueue_flush(&info->scsi.msgs);
1599
1600         sync_state = neg_invalid;
1601
1602 #ifdef SCSI2_SYNC
1603         if (info->ifcfg.capabilities & (FASCAP_DMA|FASCAP_PSEUDODMA))
1604                 sync_state = neg_wait;
1605 #endif
1606
1607         info->scsi.phase = PHASE_IDLE;
1608         info->SCpnt = NULL; /* bug! */
1609         memset(&info->scsi.SCp, 0, sizeof(info->scsi.SCp));
1610
1611         for (i = 0; i < 8; i++) {
1612                 info->device[i].disconnect_ok   = info->ifcfg.disconnect_ok;
1613                 info->device[i].sync_state      = sync_state;
1614                 info->device[i].period          = info->ifcfg.asyncperiod / 4;
1615                 info->device[i].stp             = info->scsi.async_stp;
1616                 info->device[i].sof             = 0;
1617                 info->device[i].wide_xfer       = 0;
1618         }
1619
1620         info->rst_bus_status = 1;
1621         wake_up(&info->eh_wait);
1622 }
1623
1624 /**
1625  * fas216_intr - handle interrupts to progress a command
1626  * @info: interface to service
1627  *
1628  * Handle interrupts from the interface to progress a command
1629  */
1630 irqreturn_t fas216_intr(FAS216_Info *info)
1631 {
1632         unsigned char inst, is, stat;
1633         int handled = IRQ_NONE;
1634
1635         fas216_checkmagic(info);
1636
1637         stat = fas216_readb(info, REG_STAT);
1638         is = fas216_readb(info, REG_IS);
1639         inst = fas216_readb(info, REG_INST);
1640
1641         add_debug_list(stat, is, inst, info->scsi.phase);
1642
1643         if (stat & STAT_INT) {
1644                 if (inst & INST_BUSRESET) {
1645                         fas216_log(info, 0, "bus reset detected");
1646                         fas216_bus_reset(info);
1647                         scsi_report_bus_reset(info->host, 0);
1648                 } else if (inst & INST_ILLEGALCMD) {
1649                         fas216_log(info, LOG_ERROR, "illegal command given\n");
1650                         fas216_dumpstate(info);
1651                         print_debug_list();
1652                 } else if (inst & INST_DISCONNECT)
1653                         fas216_disconnect_intr(info);
1654                 else if (inst & INST_RESELECTED)        /* reselected                   */
1655                         fas216_reselected_intr(info);
1656                 else if (inst & INST_BUSSERVICE)        /* bus service request          */
1657                         fas216_busservice_intr(info, stat, is);
1658                 else if (inst & INST_FUNCDONE)          /* function done                */
1659                         fas216_funcdone_intr(info, stat, is);
1660                 else
1661                         fas216_log(info, 0, "unknown interrupt received:"
1662                                 " phase %s inst %02X is %02X stat %02X",
1663                                 fas216_drv_phase(info), inst, is, stat);
1664                 handled = IRQ_HANDLED;
1665         }
1666         return handled;
1667 }
1668
1669 static void __fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt)
1670 {
1671         int tot_msglen;
1672
1673         /* following what the ESP driver says */
1674         fas216_set_stc(info, 0);
1675         fas216_cmd(info, CMD_NOP | CMD_WITHDMA);
1676
1677         /* flush FIFO */
1678         fas216_cmd(info, CMD_FLUSHFIFO);
1679
1680         /* load bus-id and timeout */
1681         fas216_writeb(info, REG_SDID, BUSID(SCpnt->device->id));
1682         fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout);
1683
1684         /* synchronous transfers */
1685         fas216_set_sync(info, SCpnt->device->id);
1686
1687         tot_msglen = msgqueue_msglength(&info->scsi.msgs);
1688
1689 #ifdef DEBUG_MESSAGES
1690         {
1691                 struct message *msg;
1692                 int msgnr = 0, i;
1693
1694                 printk("scsi%d.%c: message out: ",
1695                         info->host->host_no, '0' + SCpnt->device->id);
1696                 while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
1697                         printk("{ ");
1698                         for (i = 0; i < msg->length; i++)
1699                                 printk("%02x ", msg->msg[i]);
1700                         printk("} ");
1701                 }
1702                 printk("\n");
1703         }
1704 #endif
1705
1706         if (tot_msglen == 1 || tot_msglen == 3) {
1707                 /*
1708                  * We have an easy message length to send...
1709                  */
1710                 struct message *msg;
1711                 int msgnr = 0, i;
1712
1713                 info->scsi.phase = PHASE_SELSTEPS;
1714
1715                 /* load message bytes */
1716                 while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
1717                         for (i = 0; i < msg->length; i++)
1718                                 fas216_writeb(info, REG_FF, msg->msg[i]);
1719                         msg->fifo = tot_msglen - (fas216_readb(info, REG_CFIS) & CFIS_CF);
1720                 }
1721
1722                 /* load command */
1723                 for (i = 0; i < SCpnt->cmd_len; i++)
1724                         fas216_writeb(info, REG_FF, SCpnt->cmnd[i]);
1725
1726                 if (tot_msglen == 1)
1727                         fas216_cmd(info, CMD_SELECTATN);
1728                 else
1729                         fas216_cmd(info, CMD_SELECTATN3);
1730         } else {
1731                 /*
1732                  * We have an unusual number of message bytes to send.
1733                  *  Load first byte into fifo, and issue SELECT with ATN and
1734                  *  stop steps.
1735                  */
1736                 struct message *msg = msgqueue_getmsg(&info->scsi.msgs, 0);
1737
1738                 fas216_writeb(info, REG_FF, msg->msg[0]);
1739                 msg->fifo = 1;
1740
1741                 fas216_cmd(info, CMD_SELECTATNSTOP);
1742         }
1743 }
1744
1745 /*
1746  * Decide whether we need to perform a parity test on this device.
1747  * Can also be used to force parity error conditions during initial
1748  * information transfer phase (message out) for test purposes.
1749  */
1750 static int parity_test(FAS216_Info *info, int target)
1751 {
1752 #if 0
1753         if (target == 3) {
1754                 info->device[target].parity_check = 0;
1755                 return 1;
1756         }
1757 #endif
1758         return info->device[target].parity_check;
1759 }
1760
1761 static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt)
1762 {
1763         int disconnect_ok;
1764
1765         /*
1766          * claim host busy
1767          */
1768         info->scsi.phase = PHASE_SELECTION;
1769         info->scsi.SCp = SCpnt->SCp;
1770         info->SCpnt = SCpnt;
1771         info->dma.transfer_type = fasdma_none;
1772
1773         if (parity_test(info, SCpnt->device->id))
1774                 fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0] | CNTL1_PTE);
1775         else
1776                 fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
1777
1778         /*
1779          * Don't allow request sense commands to disconnect.
1780          */
1781         disconnect_ok = SCpnt->cmnd[0] != REQUEST_SENSE &&
1782                         info->device[SCpnt->device->id].disconnect_ok;
1783
1784         /*
1785          * build outgoing message bytes
1786          */
1787         msgqueue_flush(&info->scsi.msgs);
1788         msgqueue_addmsg(&info->scsi.msgs, 1, IDENTIFY(disconnect_ok, SCpnt->device->lun));
1789
1790         /*
1791          * add tag message if required
1792          */
1793         if (SCpnt->tag)
1794                 msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, SCpnt->tag);
1795
1796         do {
1797 #ifdef SCSI2_SYNC
1798                 if ((info->device[SCpnt->device->id].sync_state == neg_wait ||
1799                      info->device[SCpnt->device->id].sync_state == neg_complete) &&
1800                     (SCpnt->cmnd[0] == REQUEST_SENSE ||
1801                      SCpnt->cmnd[0] == INQUIRY)) {
1802                         info->device[SCpnt->device->id].sync_state = neg_inprogress;
1803                         msgqueue_addmsg(&info->scsi.msgs, 5,
1804                                         EXTENDED_MESSAGE, 3, EXTENDED_SDTR,
1805                                         1000 / info->ifcfg.clockrate,
1806                                         info->ifcfg.sync_max_depth);
1807                         break;
1808                 }
1809 #endif
1810         } while (0);
1811
1812         __fas216_start_command(info, SCpnt);
1813 }
1814
1815 static void fas216_allocate_tag(FAS216_Info *info, struct scsi_cmnd *SCpnt)
1816 {
1817 #ifdef SCSI2_TAG
1818         /*
1819          * tagged queuing - allocate a new tag to this command
1820          */
1821         if (SCpnt->device->simple_tags && SCpnt->cmnd[0] != REQUEST_SENSE &&
1822             SCpnt->cmnd[0] != INQUIRY) {
1823             SCpnt->device->current_tag += 1;
1824                 if (SCpnt->device->current_tag == 0)
1825                     SCpnt->device->current_tag = 1;
1826                         SCpnt->tag = SCpnt->device->current_tag;
1827         } else
1828 #endif
1829                 set_bit(SCpnt->device->id * 8 +
1830                         (u8)(SCpnt->device->lun & 0x7), info->busyluns);
1831
1832         info->stats.removes += 1;
1833         switch (SCpnt->cmnd[0]) {
1834         case WRITE_6:
1835         case WRITE_10:
1836         case WRITE_12:
1837                 info->stats.writes += 1;
1838                 break;
1839         case READ_6:
1840         case READ_10:
1841         case READ_12:
1842                 info->stats.reads += 1;
1843                 break;
1844         default:
1845                 info->stats.miscs += 1;
1846                 break;
1847         }
1848 }
1849
1850 static void fas216_do_bus_device_reset(FAS216_Info *info,
1851                                        struct scsi_cmnd *SCpnt)
1852 {
1853         struct message *msg;
1854
1855         /*
1856          * claim host busy
1857          */
1858         info->scsi.phase = PHASE_SELECTION;
1859         info->scsi.SCp = SCpnt->SCp;
1860         info->SCpnt = SCpnt;
1861         info->dma.transfer_type = fasdma_none;
1862
1863         fas216_log(info, LOG_ERROR, "sending bus device reset");
1864
1865         msgqueue_flush(&info->scsi.msgs);
1866         msgqueue_addmsg(&info->scsi.msgs, 1, BUS_DEVICE_RESET);
1867
1868         /* following what the ESP driver says */
1869         fas216_set_stc(info, 0);
1870         fas216_cmd(info, CMD_NOP | CMD_WITHDMA);
1871
1872         /* flush FIFO */
1873         fas216_cmd(info, CMD_FLUSHFIFO);
1874
1875         /* load bus-id and timeout */
1876         fas216_writeb(info, REG_SDID, BUSID(SCpnt->device->id));
1877         fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout);
1878
1879         /* synchronous transfers */
1880         fas216_set_sync(info, SCpnt->device->id);
1881
1882         msg = msgqueue_getmsg(&info->scsi.msgs, 0);
1883
1884         fas216_writeb(info, REG_FF, BUS_DEVICE_RESET);
1885         msg->fifo = 1;
1886
1887         fas216_cmd(info, CMD_SELECTATNSTOP);
1888 }
1889
1890 /**
1891  * fas216_kick - kick a command to the interface
1892  * @info: our host interface to kick
1893  *
1894  * Kick a command to the interface, interface should be idle.
1895  * Notes: Interrupts are always disabled!
1896  */
1897 static void fas216_kick(FAS216_Info *info)
1898 {
1899         struct scsi_cmnd *SCpnt = NULL;
1900 #define TYPE_OTHER      0
1901 #define TYPE_RESET      1
1902 #define TYPE_QUEUE      2
1903         int where_from = TYPE_OTHER;
1904
1905         fas216_checkmagic(info);
1906
1907         /*
1908          * Obtain the next command to process.
1909          */
1910         do {
1911                 if (info->rstSCpnt) {
1912                         SCpnt = info->rstSCpnt;
1913                         /* don't remove it */
1914                         where_from = TYPE_RESET;
1915                         break;
1916                 }
1917
1918                 if (info->reqSCpnt) {
1919                         SCpnt = info->reqSCpnt;
1920                         info->reqSCpnt = NULL;
1921                         break;
1922                 }
1923
1924                 if (info->origSCpnt) {
1925                         SCpnt = info->origSCpnt;
1926                         info->origSCpnt = NULL;
1927                         break;
1928                 }
1929
1930                 /* retrieve next command */
1931                 if (!SCpnt) {
1932                         SCpnt = queue_remove_exclude(&info->queues.issue,
1933                                                      info->busyluns);
1934                         where_from = TYPE_QUEUE;
1935                         break;
1936                 }
1937         } while (0);
1938
1939         if (!SCpnt) {
1940                 /*
1941                  * no command pending, so enable reselection.
1942                  */
1943                 fas216_cmd(info, CMD_ENABLESEL);
1944                 return;
1945         }
1946
1947         /*
1948          * We're going to start a command, so disable reselection
1949          */
1950         fas216_cmd(info, CMD_DISABLESEL);
1951
1952         if (info->scsi.disconnectable && info->SCpnt) {
1953                 fas216_log(info, LOG_CONNECT,
1954                         "moved command for %d to disconnected queue",
1955                         info->SCpnt->device->id);
1956                 queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt);
1957                 info->scsi.disconnectable = 0;
1958                 info->SCpnt = NULL;
1959         }
1960
1961         fas216_log_command(info, LOG_CONNECT | LOG_MESSAGES, SCpnt,
1962                            "starting");
1963
1964         switch (where_from) {
1965         case TYPE_QUEUE:
1966                 fas216_allocate_tag(info, SCpnt);
1967                 fallthrough;
1968         case TYPE_OTHER:
1969                 fas216_start_command(info, SCpnt);
1970                 break;
1971         case TYPE_RESET:
1972                 fas216_do_bus_device_reset(info, SCpnt);
1973                 break;
1974         }
1975
1976         fas216_log(info, LOG_CONNECT, "select: data pointers [%p, %X]",
1977                 info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
1978
1979         /*
1980          * should now get either DISCONNECT or
1981          * (FUNCTION DONE with BUS SERVICE) interrupt
1982          */
1983 }
1984
1985 /*
1986  * Clean up from issuing a BUS DEVICE RESET message to a device.
1987  */
1988 static void fas216_devicereset_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
1989                                     unsigned int result)
1990 {
1991         fas216_log(info, LOG_ERROR, "fas216 device reset complete");
1992
1993         info->rstSCpnt = NULL;
1994         info->rst_dev_status = 1;
1995         wake_up(&info->eh_wait);
1996 }
1997
1998 /**
1999  * fas216_rq_sns_done - Finish processing automatic request sense command
2000  * @info: interface that completed
2001  * @SCpnt: command that completed
2002  * @result: driver byte of result
2003  *
2004  * Finish processing automatic request sense command
2005  */
2006 static void fas216_rq_sns_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
2007                                unsigned int result)
2008 {
2009         fas216_log_target(info, LOG_CONNECT, SCpnt->device->id,
2010                    "request sense complete, result=0x%04x%02x%02x",
2011                    result, SCpnt->SCp.Message, SCpnt->SCp.Status);
2012
2013         if (result != DID_OK || SCpnt->SCp.Status != GOOD)
2014                 /*
2015                  * Something went wrong.  Make sure that we don't
2016                  * have valid data in the sense buffer that could
2017                  * confuse the higher levels.
2018                  */
2019                 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
2020 //printk("scsi%d.%c: sense buffer: ", info->host->host_no, '0' + SCpnt->device->id);
2021 //{ int i; for (i = 0; i < 32; i++) printk("%02x ", SCpnt->sense_buffer[i]); printk("\n"); }
2022         /*
2023          * Note that we don't set SCpnt->result, since that should
2024          * reflect the status of the command that we were asked by
2025          * the upper layers to process.  This would have been set
2026          * correctly by fas216_std_done.
2027          */
2028         scsi_eh_restore_cmnd(SCpnt, &info->ses);
2029         SCpnt->scsi_done(SCpnt);
2030 }
2031
2032 /**
2033  * fas216_std_done - finish processing of standard command
2034  * @info: interface that completed
2035  * @SCpnt: command that completed
2036  * @result: driver byte of result
2037  *
2038  * Finish processing of standard command
2039  */
2040 static void
2041 fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result)
2042 {
2043         info->stats.fins += 1;
2044
2045         set_host_byte(SCpnt, result);
2046         if (result == DID_OK)
2047                 scsi_msg_to_host_byte(SCpnt, info->scsi.SCp.Message);
2048         set_status_byte(SCpnt, info->scsi.SCp.Status);
2049
2050         fas216_log_command(info, LOG_CONNECT, SCpnt,
2051                 "command complete, result=0x%08x", SCpnt->result);
2052
2053         /*
2054          * If the driver detected an error, we're all done.
2055          */
2056         if (get_host_byte(SCpnt) != DID_OK)
2057                 goto done;
2058
2059         /*
2060          * If the command returned CHECK_CONDITION or COMMAND_TERMINATED
2061          * status, request the sense information.
2062          */
2063         if (get_status_byte(SCpnt) == SAM_STAT_CHECK_CONDITION ||
2064             get_status_byte(SCpnt) == SAM_STAT_COMMAND_TERMINATED)
2065                 goto request_sense;
2066
2067         /*
2068          * If the command did not complete with GOOD status,
2069          * we are all done here.
2070          */
2071         if (get_status_byte(SCpnt) != SAM_STAT_GOOD)
2072                 goto done;
2073
2074         /*
2075          * We have successfully completed a command.  Make sure that
2076          * we do not have any buffers left to transfer.  The world
2077          * is not perfect, and we seem to occasionally hit this.
2078          * It can be indicative of a buggy driver, target or the upper
2079          * levels of the SCSI code.
2080          */
2081         if (info->scsi.SCp.ptr) {
2082                 switch (SCpnt->cmnd[0]) {
2083                 case INQUIRY:
2084                 case START_STOP:
2085                 case MODE_SENSE:
2086                         break;
2087
2088                 default:
2089                         scmd_printk(KERN_ERR, SCpnt,
2090                                     "incomplete data transfer detected: res=%08X ptr=%p len=%X\n",
2091                                     SCpnt->result, info->scsi.SCp.ptr,
2092                                     info->scsi.SCp.this_residual);
2093                         scsi_print_command(SCpnt);
2094                         set_host_byte(SCpnt, DID_ERROR);
2095                         goto request_sense;
2096                 }
2097         }
2098
2099 done:
2100         if (SCpnt->scsi_done) {
2101                 SCpnt->scsi_done(SCpnt);
2102                 return;
2103         }
2104
2105         panic("scsi%d.H: null scsi_done function in fas216_done",
2106                 info->host->host_no);
2107
2108
2109 request_sense:
2110         if (SCpnt->cmnd[0] == REQUEST_SENSE)
2111                 goto done;
2112
2113         scsi_eh_prep_cmnd(SCpnt, &info->ses, NULL, 0, ~0);
2114         fas216_log_target(info, LOG_CONNECT, SCpnt->device->id,
2115                           "requesting sense");
2116         init_SCp(SCpnt);
2117         SCpnt->SCp.Message = 0;
2118         SCpnt->SCp.Status = 0;
2119         SCpnt->tag = 0;
2120         SCpnt->host_scribble = (void *)fas216_rq_sns_done;
2121
2122         /*
2123          * Place this command into the high priority "request
2124          * sense" slot.  This will be the very next command
2125          * executed, unless a target connects to us.
2126          */
2127         if (info->reqSCpnt)
2128                 printk(KERN_WARNING "scsi%d.%c: losing request command\n",
2129                         info->host->host_no, '0' + SCpnt->device->id);
2130         info->reqSCpnt = SCpnt;
2131 }
2132
2133 /**
2134  * fas216_done - complete processing for current command
2135  * @info: interface that completed
2136  * @result: driver byte of result
2137  *
2138  * Complete processing for current command
2139  */
2140 static void fas216_done(FAS216_Info *info, unsigned int result)
2141 {
2142         void (*fn)(FAS216_Info *, struct scsi_cmnd *, unsigned int);
2143         struct scsi_cmnd *SCpnt;
2144         unsigned long flags;
2145
2146         fas216_checkmagic(info);
2147
2148         if (!info->SCpnt)
2149                 goto no_command;
2150
2151         SCpnt = info->SCpnt;
2152         info->SCpnt = NULL;
2153         info->scsi.phase = PHASE_IDLE;
2154
2155         if (info->scsi.aborting) {
2156                 fas216_log(info, 0, "uncaught abort - returning DID_ABORT");
2157                 result = DID_ABORT;
2158                 info->scsi.aborting = 0;
2159         }
2160
2161         /*
2162          * Sanity check the completion - if we have zero bytes left
2163          * to transfer, we should not have a valid pointer.
2164          */
2165         if (info->scsi.SCp.ptr && info->scsi.SCp.this_residual == 0) {
2166                 scmd_printk(KERN_INFO, SCpnt,
2167                             "zero bytes left to transfer, but buffer pointer still valid: ptr=%p len=%08x\n",
2168                             info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
2169                 info->scsi.SCp.ptr = NULL;
2170                 scsi_print_command(SCpnt);
2171         }
2172
2173         /*
2174          * Clear down this command as completed.  If we need to request
2175          * the sense information, fas216_kick will re-assert the busy
2176          * status.
2177          */
2178         info->device[SCpnt->device->id].parity_check = 0;
2179         clear_bit(SCpnt->device->id * 8 +
2180                   (u8)(SCpnt->device->lun & 0x7), info->busyluns);
2181
2182         fn = (void (*)(FAS216_Info *, struct scsi_cmnd *, unsigned int))SCpnt->host_scribble;
2183         fn(info, SCpnt, result);
2184
2185         if (info->scsi.irq) {
2186                 spin_lock_irqsave(&info->host_lock, flags);
2187                 if (info->scsi.phase == PHASE_IDLE)
2188                         fas216_kick(info);
2189                 spin_unlock_irqrestore(&info->host_lock, flags);
2190         }
2191         return;
2192
2193 no_command:
2194         panic("scsi%d.H: null command in fas216_done",
2195                 info->host->host_no);
2196 }
2197
2198 /**
2199  * fas216_queue_command - queue a command for adapter to process.
2200  * @SCpnt: Command to queue
2201  * @done: done function to call once command is complete
2202  *
2203  * Queue a command for adapter to process.
2204  * Returns: 0 on success, else error.
2205  * Notes: io_request_lock is held, interrupts are disabled.
2206  */
2207 static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt,
2208                          void (*done)(struct scsi_cmnd *))
2209 {
2210         FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2211         int result;
2212
2213         fas216_checkmagic(info);
2214
2215         fas216_log_command(info, LOG_CONNECT, SCpnt,
2216                            "received command (%p)", SCpnt);
2217
2218         SCpnt->scsi_done = done;
2219         SCpnt->host_scribble = (void *)fas216_std_done;
2220         SCpnt->result = 0;
2221
2222         init_SCp(SCpnt);
2223
2224         info->stats.queues += 1;
2225         SCpnt->tag = 0;
2226
2227         spin_lock(&info->host_lock);
2228
2229         /*
2230          * Add command into execute queue and let it complete under
2231          * whatever scheme we're using.
2232          */
2233         result = !queue_add_cmd_ordered(&info->queues.issue, SCpnt);
2234
2235         /*
2236          * If we successfully added the command,
2237          * kick the interface to get it moving.
2238          */
2239         if (result == 0 && info->scsi.phase == PHASE_IDLE)
2240                 fas216_kick(info);
2241         spin_unlock(&info->host_lock);
2242
2243         fas216_log_target(info, LOG_CONNECT, -1, "queue %s",
2244                 result ? "failure" : "success");
2245
2246         return result;
2247 }
2248
2249 DEF_SCSI_QCMD(fas216_queue_command)
2250
2251 /**
2252  * fas216_internal_done - trigger restart of a waiting thread in fas216_noqueue_command
2253  * @SCpnt: Command to wake
2254  *
2255  * Trigger restart of a waiting thread in fas216_command
2256  */
2257 static void fas216_internal_done(struct scsi_cmnd *SCpnt)
2258 {
2259         FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2260
2261         fas216_checkmagic(info);
2262
2263         info->internal_done = 1;
2264 }
2265
2266 /**
2267  * fas216_noqueue_command - process a command for the adapter.
2268  * @SCpnt: Command to queue
2269  *
2270  * Queue a command for adapter to process.
2271  * Returns: scsi result code.
2272  * Notes: io_request_lock is held, interrupts are disabled.
2273  */
2274 static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
2275                            void (*done)(struct scsi_cmnd *))
2276 {
2277         FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2278
2279         fas216_checkmagic(info);
2280
2281         /*
2282          * We should only be using this if we don't have an interrupt.
2283          * Provide some "incentive" to use the queueing code.
2284          */
2285         BUG_ON(info->scsi.irq);
2286
2287         info->internal_done = 0;
2288         fas216_queue_command_lck(SCpnt, fas216_internal_done);
2289
2290         /*
2291          * This wastes time, since we can't return until the command is
2292          * complete. We can't sleep either since we may get re-entered!
2293          * However, we must re-enable interrupts, or else we'll be
2294          * waiting forever.
2295          */
2296         spin_unlock_irq(info->host->host_lock);
2297
2298         while (!info->internal_done) {
2299                 /*
2300                  * If we don't have an IRQ, then we must poll the card for
2301                  * it's interrupt, and use that to call this driver's
2302                  * interrupt routine.  That way, we keep the command
2303                  * progressing.  Maybe we can add some intelligence here
2304                  * and go to sleep if we know that the device is going
2305                  * to be some time (eg, disconnected).
2306                  */
2307                 if (fas216_readb(info, REG_STAT) & STAT_INT) {
2308                         spin_lock_irq(info->host->host_lock);
2309                         fas216_intr(info);
2310                         spin_unlock_irq(info->host->host_lock);
2311                 }
2312         }
2313
2314         spin_lock_irq(info->host->host_lock);
2315
2316         done(SCpnt);
2317
2318         return 0;
2319 }
2320
2321 DEF_SCSI_QCMD(fas216_noqueue_command)
2322
2323 /*
2324  * Error handler timeout function.  Indicate that we timed out,
2325  * and wake up any error handler process so it can continue.
2326  */
2327 static void fas216_eh_timer(struct timer_list *t)
2328 {
2329         FAS216_Info *info = from_timer(info, t, eh_timer);
2330
2331         fas216_log(info, LOG_ERROR, "error handling timed out\n");
2332
2333         del_timer(&info->eh_timer);
2334
2335         if (info->rst_bus_status == 0)
2336                 info->rst_bus_status = -1;
2337         if (info->rst_dev_status == 0)
2338                 info->rst_dev_status = -1;
2339
2340         wake_up(&info->eh_wait);
2341 }
2342
2343 enum res_find {
2344         res_failed,             /* not found                    */
2345         res_success,            /* command on issue queue       */
2346         res_hw_abort            /* command on disconnected dev  */
2347 };
2348
2349 /**
2350  * fas216_do_abort - decide how to abort a command
2351  * @SCpnt: command to abort
2352  *
2353  * Decide how to abort a command.
2354  * Returns: abort status
2355  */
2356 static enum res_find fas216_find_command(FAS216_Info *info,
2357                                          struct scsi_cmnd *SCpnt)
2358 {
2359         enum res_find res = res_failed;
2360
2361         if (queue_remove_cmd(&info->queues.issue, SCpnt)) {
2362                 /*
2363                  * The command was on the issue queue, and has not been
2364                  * issued yet.  We can remove the command from the queue,
2365                  * and acknowledge the abort.  Neither the device nor the
2366                  * interface know about the command.
2367                  */
2368                 printk("on issue queue ");
2369
2370                 res = res_success;
2371         } else if (queue_remove_cmd(&info->queues.disconnected, SCpnt)) {
2372                 /*
2373                  * The command was on the disconnected queue.  We must
2374                  * reconnect with the device if possible, and send it
2375                  * an abort message.
2376                  */
2377                 printk("on disconnected queue ");
2378
2379                 res = res_hw_abort;
2380         } else if (info->SCpnt == SCpnt) {
2381                 printk("executing ");
2382
2383                 switch (info->scsi.phase) {
2384                 /*
2385                  * If the interface is idle, and the command is 'disconnectable',
2386                  * then it is the same as on the disconnected queue.
2387                  */
2388                 case PHASE_IDLE:
2389                         if (info->scsi.disconnectable) {
2390                                 info->scsi.disconnectable = 0;
2391                                 info->SCpnt = NULL;
2392                                 res = res_hw_abort;
2393                         }
2394                         break;
2395
2396                 default:
2397                         break;
2398                 }
2399         } else if (info->origSCpnt == SCpnt) {
2400                 /*
2401                  * The command will be executed next, but a command
2402                  * is currently using the interface.  This is similar to
2403                  * being on the issue queue, except the busylun bit has
2404                  * been set.
2405                  */
2406                 info->origSCpnt = NULL;
2407                 clear_bit(SCpnt->device->id * 8 +
2408                           (u8)(SCpnt->device->lun & 0x7), info->busyluns);
2409                 printk("waiting for execution ");
2410                 res = res_success;
2411         } else
2412                 printk("unknown ");
2413
2414         return res;
2415 }
2416
2417 /**
2418  * fas216_eh_abort - abort this command
2419  * @SCpnt: command to abort
2420  *
2421  * Abort this command.
2422  * Returns: FAILED if unable to abort
2423  * Notes: io_request_lock is taken, and irqs are disabled
2424  */
2425 int fas216_eh_abort(struct scsi_cmnd *SCpnt)
2426 {
2427         FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2428         int result = FAILED;
2429
2430         fas216_checkmagic(info);
2431
2432         info->stats.aborts += 1;
2433
2434         scmd_printk(KERN_WARNING, SCpnt, "abort command\n");
2435
2436         print_debug_list();
2437         fas216_dumpstate(info);
2438
2439         switch (fas216_find_command(info, SCpnt)) {
2440         /*
2441          * We found the command, and cleared it out.  Either
2442          * the command is still known to be executing on the
2443          * target, or the busylun bit is not set.
2444          */
2445         case res_success:
2446                 scmd_printk(KERN_WARNING, SCpnt, "abort %p success\n", SCpnt);
2447                 result = SUCCESS;
2448                 break;
2449
2450         /*
2451          * We need to reconnect to the target and send it an
2452          * ABORT or ABORT_TAG message.  We can only do this
2453          * if the bus is free.
2454          */
2455         case res_hw_abort:
2456
2457         /*
2458          * We are unable to abort the command for some reason.
2459          */
2460         default:
2461         case res_failed:
2462                 scmd_printk(KERN_WARNING, SCpnt, "abort %p failed\n", SCpnt);
2463                 break;
2464         }
2465
2466         return result;
2467 }
2468
2469 /**
2470  * fas216_eh_device_reset - Reset the device associated with this command
2471  * @SCpnt: command specifing device to reset
2472  *
2473  * Reset the device associated with this command.
2474  * Returns: FAILED if unable to reset.
2475  * Notes: We won't be re-entered, so we'll only have one device
2476  * reset on the go at one time.
2477  */
2478 int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
2479 {
2480         FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2481         unsigned long flags;
2482         int i, res = FAILED, target = SCpnt->device->id;
2483
2484         fas216_log(info, LOG_ERROR, "device reset for target %d", target);
2485
2486         spin_lock_irqsave(&info->host_lock, flags);
2487
2488         do {
2489                 /*
2490                  * If we are currently connected to a device, and
2491                  * it is the device we want to reset, there is
2492                  * nothing we can do here.  Chances are it is stuck,
2493                  * and we need a bus reset.
2494                  */
2495                 if (info->SCpnt && !info->scsi.disconnectable &&
2496                     info->SCpnt->device->id == SCpnt->device->id)
2497                         break;
2498
2499                 /*
2500                  * We're going to be resetting this device.  Remove
2501                  * all pending commands from the driver.  By doing
2502                  * so, we guarantee that we won't touch the command
2503                  * structures except to process the reset request.
2504                  */
2505                 queue_remove_all_target(&info->queues.issue, target);
2506                 queue_remove_all_target(&info->queues.disconnected, target);
2507                 if (info->origSCpnt && info->origSCpnt->device->id == target)
2508                         info->origSCpnt = NULL;
2509                 if (info->reqSCpnt && info->reqSCpnt->device->id == target)
2510                         info->reqSCpnt = NULL;
2511                 for (i = 0; i < 8; i++)
2512                         clear_bit(target * 8 + i, info->busyluns);
2513
2514                 /*
2515                  * Hijack this SCSI command structure to send
2516                  * a bus device reset message to this device.
2517                  */
2518                 SCpnt->host_scribble = (void *)fas216_devicereset_done;
2519
2520                 info->rst_dev_status = 0;
2521                 info->rstSCpnt = SCpnt;
2522
2523                 if (info->scsi.phase == PHASE_IDLE)
2524                         fas216_kick(info);
2525
2526                 mod_timer(&info->eh_timer, jiffies + 30 * HZ);
2527                 spin_unlock_irqrestore(&info->host_lock, flags);
2528
2529                 /*
2530                  * Wait up to 30 seconds for the reset to complete.
2531                  */
2532                 wait_event(info->eh_wait, info->rst_dev_status);
2533
2534                 del_timer_sync(&info->eh_timer);
2535                 spin_lock_irqsave(&info->host_lock, flags);
2536                 info->rstSCpnt = NULL;
2537
2538                 if (info->rst_dev_status == 1)
2539                         res = SUCCESS;
2540         } while (0);
2541
2542         SCpnt->host_scribble = NULL;
2543         spin_unlock_irqrestore(&info->host_lock, flags);
2544
2545         fas216_log(info, LOG_ERROR, "device reset complete: %s\n",
2546                    res == SUCCESS ? "success" : "failed");
2547
2548         return res;
2549 }
2550
2551 /**
2552  * fas216_eh_bus_reset - Reset the bus associated with the command
2553  * @SCpnt: command specifing bus to reset
2554  *
2555  * Reset the bus associated with the command.
2556  * Returns: FAILED if unable to reset.
2557  * Notes: Further commands are blocked.
2558  */
2559 int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt)
2560 {
2561         FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2562         unsigned long flags;
2563         struct scsi_device *SDpnt;
2564
2565         fas216_checkmagic(info);
2566         fas216_log(info, LOG_ERROR, "resetting bus");
2567
2568         info->stats.bus_resets += 1;
2569
2570         spin_lock_irqsave(&info->host_lock, flags);
2571
2572         /*
2573          * Stop all activity on this interface.
2574          */
2575         fas216_aborttransfer(info);
2576         fas216_writeb(info, REG_CNTL3, info->scsi.cfg[2]);
2577
2578         /*
2579          * Clear any pending interrupts.
2580          */
2581         while (fas216_readb(info, REG_STAT) & STAT_INT)
2582                 fas216_readb(info, REG_INST);
2583
2584         info->rst_bus_status = 0;
2585
2586         /*
2587          * For each attached hard-reset device, clear out
2588          * all command structures.  Leave the running
2589          * command in place.
2590          */
2591         shost_for_each_device(SDpnt, info->host) {
2592                 int i;
2593
2594                 if (SDpnt->soft_reset)
2595                         continue;
2596
2597                 queue_remove_all_target(&info->queues.issue, SDpnt->id);
2598                 queue_remove_all_target(&info->queues.disconnected, SDpnt->id);
2599                 if (info->origSCpnt && info->origSCpnt->device->id == SDpnt->id)
2600                         info->origSCpnt = NULL;
2601                 if (info->reqSCpnt && info->reqSCpnt->device->id == SDpnt->id)
2602                         info->reqSCpnt = NULL;
2603                 info->SCpnt = NULL;
2604
2605                 for (i = 0; i < 8; i++)
2606                         clear_bit(SDpnt->id * 8 + i, info->busyluns);
2607         }
2608
2609         info->scsi.phase = PHASE_IDLE;
2610
2611         /*
2612          * Reset the SCSI bus.  Device cleanup happens in
2613          * the interrupt handler.
2614          */
2615         fas216_cmd(info, CMD_RESETSCSI);
2616
2617         mod_timer(&info->eh_timer, jiffies + HZ);
2618         spin_unlock_irqrestore(&info->host_lock, flags);
2619
2620         /*
2621          * Wait one second for the interrupt.
2622          */
2623         wait_event(info->eh_wait, info->rst_bus_status);
2624         del_timer_sync(&info->eh_timer);
2625
2626         fas216_log(info, LOG_ERROR, "bus reset complete: %s\n",
2627                    info->rst_bus_status == 1 ? "success" : "failed");
2628
2629         return info->rst_bus_status == 1 ? SUCCESS : FAILED;
2630 }
2631
2632 /**
2633  * fas216_init_chip - Initialise FAS216 state after reset
2634  * @info: state structure for interface
2635  *
2636  * Initialise FAS216 state after reset
2637  */
2638 static void fas216_init_chip(FAS216_Info *info)
2639 {
2640         unsigned int clock = ((info->ifcfg.clockrate - 1) / 5 + 1) & 7;
2641         fas216_writeb(info, REG_CLKF, clock);
2642         fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
2643         fas216_writeb(info, REG_CNTL2, info->scsi.cfg[1]);
2644         fas216_writeb(info, REG_CNTL3, info->scsi.cfg[2]);
2645         fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout);
2646         fas216_writeb(info, REG_SOF, 0);
2647         fas216_writeb(info, REG_STP, info->scsi.async_stp);
2648         fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
2649 }
2650
2651 /**
2652  * fas216_eh_host_reset - Reset the host associated with this command
2653  * @SCpnt: command specifing host to reset
2654  *
2655  * Reset the host associated with this command.
2656  * Returns: FAILED if unable to reset.
2657  * Notes: io_request_lock is taken, and irqs are disabled
2658  */
2659 int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
2660 {
2661         FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2662
2663         spin_lock_irq(info->host->host_lock);
2664
2665         fas216_checkmagic(info);
2666
2667         fas216_log(info, LOG_ERROR, "resetting host");
2668
2669         /*
2670          * Reset the SCSI chip.
2671          */
2672         fas216_cmd(info, CMD_RESETCHIP);
2673
2674         /*
2675          * Ugly ugly ugly!
2676          * We need to release the host_lock and enable
2677          * IRQs if we sleep, but we must relock and disable
2678          * IRQs after the sleep.
2679          */
2680         spin_unlock_irq(info->host->host_lock);
2681         msleep(50 * 1000/100);
2682         spin_lock_irq(info->host->host_lock);
2683
2684         /*
2685          * Release the SCSI reset.
2686          */
2687         fas216_cmd(info, CMD_NOP);
2688
2689         fas216_init_chip(info);
2690
2691         spin_unlock_irq(info->host->host_lock);
2692         return SUCCESS;
2693 }
2694
2695 #define TYPE_UNKNOWN    0
2696 #define TYPE_NCR53C90   1
2697 #define TYPE_NCR53C90A  2
2698 #define TYPE_NCR53C9x   3
2699 #define TYPE_Am53CF94   4
2700 #define TYPE_EmFAS216   5
2701 #define TYPE_QLFAS216   6
2702
2703 static char *chip_types[] = {
2704         "unknown",
2705         "NS NCR53C90",
2706         "NS NCR53C90A",
2707         "NS NCR53C9x",
2708         "AMD Am53CF94",
2709         "Emulex FAS216",
2710         "QLogic FAS216"
2711 };
2712
2713 static int fas216_detect_type(FAS216_Info *info)
2714 {
2715         int family, rev;
2716
2717         /*
2718          * Reset the chip.
2719          */
2720         fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
2721         udelay(50);
2722         fas216_writeb(info, REG_CMD, CMD_NOP);
2723
2724         /*
2725          * Check to see if control reg 2 is present.
2726          */
2727         fas216_writeb(info, REG_CNTL3, 0);
2728         fas216_writeb(info, REG_CNTL2, CNTL2_S2FE);
2729
2730         /*
2731          * If we are unable to read back control reg 2
2732          * correctly, it is not present, and we have a
2733          * NCR53C90.
2734          */
2735         if ((fas216_readb(info, REG_CNTL2) & (~0xe0)) != CNTL2_S2FE)
2736                 return TYPE_NCR53C90;
2737
2738         /*
2739          * Now, check control register 3
2740          */
2741         fas216_writeb(info, REG_CNTL2, 0);
2742         fas216_writeb(info, REG_CNTL3, 0);
2743         fas216_writeb(info, REG_CNTL3, 5);
2744
2745         /*
2746          * If we are unable to read the register back
2747          * correctly, we have a NCR53C90A
2748          */
2749         if (fas216_readb(info, REG_CNTL3) != 5)
2750                 return TYPE_NCR53C90A;
2751
2752         /*
2753          * Now read the ID from the chip.
2754          */
2755         fas216_writeb(info, REG_CNTL3, 0);
2756
2757         fas216_writeb(info, REG_CNTL3, CNTL3_ADIDCHK);
2758         fas216_writeb(info, REG_CNTL3, 0);
2759
2760         fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
2761         udelay(50);
2762         fas216_writeb(info, REG_CMD, CMD_WITHDMA | CMD_NOP);
2763
2764         fas216_writeb(info, REG_CNTL2, CNTL2_ENF);
2765         fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
2766         udelay(50);
2767         fas216_writeb(info, REG_CMD, CMD_NOP);
2768
2769         rev     = fas216_readb(info, REG_ID);
2770         family  = rev >> 3;
2771         rev    &= 7;
2772
2773         switch (family) {
2774         case 0x01:
2775                 if (rev == 4)
2776                         return TYPE_Am53CF94;
2777                 break;
2778
2779         case 0x02:
2780                 switch (rev) {
2781                 case 2:
2782                         return TYPE_EmFAS216;
2783                 case 3:
2784                         return TYPE_QLFAS216;
2785                 }
2786                 break;
2787
2788         default:
2789                 break;
2790         }
2791         printk("family %x rev %x\n", family, rev);
2792         return TYPE_NCR53C9x;
2793 }
2794
2795 /**
2796  * fas216_reset_state - Initialise driver internal state
2797  * @info: state to initialise
2798  *
2799  * Initialise driver internal state
2800  */
2801 static void fas216_reset_state(FAS216_Info *info)
2802 {
2803         int i;
2804
2805         fas216_checkmagic(info);
2806
2807         fas216_bus_reset(info);
2808
2809         /*
2810          * Clear out all stale info in our state structure
2811          */
2812         memset(info->busyluns, 0, sizeof(info->busyluns));
2813         info->scsi.disconnectable = 0;
2814         info->scsi.aborting = 0;
2815
2816         for (i = 0; i < 8; i++) {
2817                 info->device[i].parity_enabled  = 0;
2818                 info->device[i].parity_check    = 1;
2819         }
2820
2821         /*
2822          * Drain all commands on disconnected queue
2823          */
2824         while (queue_remove(&info->queues.disconnected) != NULL);
2825
2826         /*
2827          * Remove executing commands.
2828          */
2829         info->SCpnt     = NULL;
2830         info->reqSCpnt  = NULL;
2831         info->rstSCpnt  = NULL;
2832         info->origSCpnt = NULL;
2833 }
2834
2835 /**
2836  * fas216_init - initialise FAS/NCR/AMD SCSI structures.
2837  * @host: a driver-specific filled-out structure
2838  *
2839  * Initialise FAS/NCR/AMD SCSI structures.
2840  * Returns: 0 on success
2841  */
2842 int fas216_init(struct Scsi_Host *host)
2843 {
2844         FAS216_Info *info = (FAS216_Info *)host->hostdata;
2845
2846         info->magic_start    = MAGIC;
2847         info->magic_end      = MAGIC;
2848         info->host           = host;
2849         info->scsi.cfg[0]    = host->this_id | CNTL1_PERE;
2850         info->scsi.cfg[1]    = CNTL2_ENF | CNTL2_S2FE;
2851         info->scsi.cfg[2]    = info->ifcfg.cntl3 |
2852                                CNTL3_ADIDCHK | CNTL3_QTAG | CNTL3_G2CB | CNTL3_LBTM;
2853         info->scsi.async_stp = fas216_syncperiod(info, info->ifcfg.asyncperiod);
2854
2855         info->rst_dev_status = -1;
2856         info->rst_bus_status = -1;
2857         init_waitqueue_head(&info->eh_wait);
2858         timer_setup(&info->eh_timer, fas216_eh_timer, 0);
2859
2860         spin_lock_init(&info->host_lock);
2861
2862         memset(&info->stats, 0, sizeof(info->stats));
2863
2864         msgqueue_initialise(&info->scsi.msgs);
2865
2866         if (!queue_initialise(&info->queues.issue))
2867                 return -ENOMEM;
2868
2869         if (!queue_initialise(&info->queues.disconnected)) {
2870                 queue_free(&info->queues.issue);
2871                 return -ENOMEM;
2872         }
2873
2874         return 0;
2875 }
2876
2877 /**
2878  * fas216_add - initialise FAS/NCR/AMD SCSI ic.
2879  * @host: a driver-specific filled-out structure
2880  * @dev: parent device
2881  *
2882  * Initialise FAS/NCR/AMD SCSI ic.
2883  * Returns: 0 on success
2884  */
2885 int fas216_add(struct Scsi_Host *host, struct device *dev)
2886 {
2887         FAS216_Info *info = (FAS216_Info *)host->hostdata;
2888         int type, ret;
2889
2890         if (info->ifcfg.clockrate <= 10 || info->ifcfg.clockrate > 40) {
2891                 printk(KERN_CRIT "fas216: invalid clock rate %u MHz\n",
2892                         info->ifcfg.clockrate);
2893                 return -EINVAL;
2894         }
2895
2896         fas216_reset_state(info);
2897         type = fas216_detect_type(info);
2898         info->scsi.type = chip_types[type];
2899
2900         udelay(300);
2901
2902         /*
2903          * Initialise the chip correctly.
2904          */
2905         fas216_init_chip(info);
2906
2907         /*
2908          * Reset the SCSI bus.  We don't want to see
2909          * the resulting reset interrupt, so mask it
2910          * out.
2911          */
2912         fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0] | CNTL1_DISR);
2913         fas216_writeb(info, REG_CMD, CMD_RESETSCSI);
2914
2915         /*
2916          * scsi standard says wait 250ms
2917          */
2918         spin_unlock_irq(info->host->host_lock);
2919         msleep(100*1000/100);
2920         spin_lock_irq(info->host->host_lock);
2921
2922         fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
2923         fas216_readb(info, REG_INST);
2924
2925         fas216_checkmagic(info);
2926
2927         ret = scsi_add_host(host, dev);
2928         if (ret)
2929                 fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
2930         else
2931                 scsi_scan_host(host);
2932
2933         return ret;
2934 }
2935
2936 void fas216_remove(struct Scsi_Host *host)
2937 {
2938         FAS216_Info *info = (FAS216_Info *)host->hostdata;
2939
2940         fas216_checkmagic(info);
2941         scsi_remove_host(host);
2942
2943         fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
2944         scsi_host_put(host);
2945 }
2946
2947 /**
2948  * fas216_release - release all resources for FAS/NCR/AMD SCSI ic.
2949  * @host: a driver-specific filled-out structure
2950  *
2951  * release all resources and put everything to bed for FAS/NCR/AMD SCSI ic.
2952  */
2953 void fas216_release(struct Scsi_Host *host)
2954 {
2955         FAS216_Info *info = (FAS216_Info *)host->hostdata;
2956
2957         queue_free(&info->queues.disconnected);
2958         queue_free(&info->queues.issue);
2959 }
2960
2961 void fas216_print_host(FAS216_Info *info, struct seq_file *m)
2962 {
2963         seq_printf(m,
2964                         "\n"
2965                         "Chip    : %s\n"
2966                         " Address: 0x%p\n"
2967                         " IRQ    : %d\n"
2968                         " DMA    : %d\n",
2969                         info->scsi.type, info->scsi.io_base,
2970                         info->scsi.irq, info->scsi.dma);
2971 }
2972
2973 void fas216_print_stats(FAS216_Info *info, struct seq_file *m)
2974 {
2975         seq_printf(m, "\n"
2976                         "Command Statistics:\n"
2977                         " Queued     : %u\n"
2978                         " Issued     : %u\n"
2979                         " Completed  : %u\n"
2980                         " Reads      : %u\n"
2981                         " Writes     : %u\n"
2982                         " Others     : %u\n"
2983                         " Disconnects: %u\n"
2984                         " Aborts     : %u\n"
2985                         " Bus resets : %u\n"
2986                         " Host resets: %u\n",
2987                         info->stats.queues,      info->stats.removes,
2988                         info->stats.fins,        info->stats.reads,
2989                         info->stats.writes,      info->stats.miscs,
2990                         info->stats.disconnects, info->stats.aborts,
2991                         info->stats.bus_resets,  info->stats.host_resets);
2992 }
2993
2994 void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
2995 {
2996         struct fas216_device *dev;
2997         struct scsi_device *scd;
2998
2999         seq_puts(m, "Device/Lun TaggedQ       Parity   Sync\n");
3000
3001         shost_for_each_device(scd, info->host) {
3002                 dev = &info->device[scd->id];
3003                 seq_printf(m, "     %d/%llu   ", scd->id, scd->lun);
3004                 if (scd->tagged_supported)
3005                         seq_printf(m, "%3sabled(%3d) ",
3006                                      scd->simple_tags ? "en" : "dis",
3007                                      scd->current_tag);
3008                 else
3009                         seq_puts(m, "unsupported   ");
3010
3011                 seq_printf(m, "%3sabled ", dev->parity_enabled ? "en" : "dis");
3012
3013                 if (dev->sof)
3014                         seq_printf(m, "offset %d, %d ns\n",
3015                                      dev->sof, dev->period * 4);
3016                 else
3017                         seq_puts(m, "async\n");
3018         }
3019 }
3020
3021 EXPORT_SYMBOL(fas216_init);
3022 EXPORT_SYMBOL(fas216_add);
3023 EXPORT_SYMBOL(fas216_queue_command);
3024 EXPORT_SYMBOL(fas216_noqueue_command);
3025 EXPORT_SYMBOL(fas216_intr);
3026 EXPORT_SYMBOL(fas216_remove);
3027 EXPORT_SYMBOL(fas216_release);
3028 EXPORT_SYMBOL(fas216_eh_abort);
3029 EXPORT_SYMBOL(fas216_eh_device_reset);
3030 EXPORT_SYMBOL(fas216_eh_bus_reset);
3031 EXPORT_SYMBOL(fas216_eh_host_reset);
3032 EXPORT_SYMBOL(fas216_print_host);
3033 EXPORT_SYMBOL(fas216_print_stats);
3034 EXPORT_SYMBOL(fas216_print_devices);
3035
3036 MODULE_AUTHOR("Russell King");
3037 MODULE_DESCRIPTION("Generic FAS216/NCR53C9x driver core");
3038 MODULE_LICENSE("GPL");