2 *******************************************************************************
4 ** FILE NAME : arcmsr.h
6 ** Description: SCSI RAID Device Driver for
7 ** ARECA RAID Host adapter
8 *******************************************************************************
9 ** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved.
11 ** Web site: www.areca.com.tw
12 ** E-mail: support@areca.com.tw
14 ** This program is free software; you can redistribute it and/or modify
15 ** it under the terms of the GNU General Public License version 2 as
16 ** published by the Free Software Foundation.
17 ** This program is distributed in the hope that it will be useful,
18 ** but WITHOUT ANY WARRANTY; without even the implied warranty of
19 ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 ** GNU General Public License for more details.
21 *******************************************************************************
22 ** Redistribution and use in source and binary forms, with or without
23 ** modification, are permitted provided that the following conditions
25 ** 1. Redistributions of source code must retain the above copyright
26 ** notice, this list of conditions and the following disclaimer.
27 ** 2. Redistributions in binary form must reproduce the above copyright
28 ** notice, this list of conditions and the following disclaimer in the
29 ** documentation and/or other materials provided with the distribution.
30 ** 3. The name of the author may not be used to endorse or promote products
31 ** derived from this software without specific prior written permission.
33 ** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
34 ** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
35 ** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
36 ** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
37 ** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT
38 ** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
39 ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY
40 ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
41 **(INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF
42 ** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
43 *******************************************************************************
45 #include <linux/interrupt.h>
46 struct device_attribute;
47 /*The limit of outstanding scsi command that firmware can handle*/
48 #define ARCMSR_NAME "arcmsr"
49 #define ARCMSR_MAX_FREECCB_NUM 1024
50 #define ARCMSR_MAX_OUTSTANDING_CMD 1024
51 #define ARCMSR_DEFAULT_OUTSTANDING_CMD 128
52 #define ARCMSR_MIN_OUTSTANDING_CMD 32
53 #define ARCMSR_DRIVER_VERSION "v1.50.00.13-20230206"
54 #define ARCMSR_SCSI_INITIATOR_ID 255
55 #define ARCMSR_MAX_XFER_SECTORS 512
56 #define ARCMSR_MAX_XFER_SECTORS_B 4096
57 #define ARCMSR_MAX_XFER_SECTORS_C 304
58 #define ARCMSR_MAX_TARGETID 17
59 #define ARCMSR_MAX_TARGETLUN 8
60 #define ARCMSR_MAX_CMD_PERLUN 128
61 #define ARCMSR_DEFAULT_CMD_PERLUN 32
62 #define ARCMSR_MIN_CMD_PERLUN 1
63 #define ARCMSR_MAX_QBUFFER 4096
64 #define ARCMSR_DEFAULT_SG_ENTRIES 38
65 #define ARCMSR_MAX_HBB_POSTQUEUE 264
66 #define ARCMSR_MAX_ARC1214_POSTQUEUE 256
67 #define ARCMSR_MAX_ARC1214_DONEQUEUE 257
68 #define ARCMSR_MAX_HBE_DONEQUEUE 512
69 #define ARCMSR_MAX_XFER_LEN 0x26000 /* 152K */
70 #define ARCMSR_CDB_SG_PAGE_LENGTH 256
71 #define ARCMST_NUM_MSIX_VECTORS 4
72 #ifndef PCI_DEVICE_ID_ARECA_1880
73 #define PCI_DEVICE_ID_ARECA_1880 0x1880
75 #ifndef PCI_DEVICE_ID_ARECA_1214
76 #define PCI_DEVICE_ID_ARECA_1214 0x1214
78 #ifndef PCI_DEVICE_ID_ARECA_1203
79 #define PCI_DEVICE_ID_ARECA_1203 0x1203
81 #ifndef PCI_DEVICE_ID_ARECA_1884
82 #define PCI_DEVICE_ID_ARECA_1884 0x1884
84 #define PCI_DEVICE_ID_ARECA_1886 0x188A
85 #define ARCMSR_HOURS (1000 * 60 * 60 * 4)
86 #define ARCMSR_MINUTES (1000 * 60 * 60)
87 #define ARCMSR_DEFAULT_TIMEOUT 90
89 **********************************************************************************
91 **********************************************************************************
96 *******************************************************************************
97 ** split 64bits dma addressing
98 *******************************************************************************
100 #define dma_addr_hi32(addr) (uint32_t) ((addr>>16)>>16)
101 #define dma_addr_lo32(addr) (uint32_t) (addr & 0xffffffff)
103 *******************************************************************************
104 ** MESSAGE CONTROL CODE
105 *******************************************************************************
109 uint32_t HeaderLength;
110 uint8_t Signature[8];
112 uint32_t ControlCode;
117 *******************************************************************************
118 ** IOP Message Transfer Data for user space
119 *******************************************************************************
121 #define ARCMSR_API_DATA_BUFLEN 1032
122 struct CMD_MESSAGE_FIELD
124 struct CMD_MESSAGE cmdmessage;
125 uint8_t messagedatabuffer[ARCMSR_API_DATA_BUFLEN];
127 /* IOP message transfer */
128 #define ARCMSR_MESSAGE_FAIL 0x0001
130 #define ARECA_SATA_RAID 0x90000000
132 #define FUNCTION_READ_RQBUFFER 0x0801
133 #define FUNCTION_WRITE_WQBUFFER 0x0802
134 #define FUNCTION_CLEAR_RQBUFFER 0x0803
135 #define FUNCTION_CLEAR_WQBUFFER 0x0804
136 #define FUNCTION_CLEAR_ALLQBUFFER 0x0805
137 #define FUNCTION_RETURN_CODE_3F 0x0806
138 #define FUNCTION_SAY_HELLO 0x0807
139 #define FUNCTION_SAY_GOODBYE 0x0808
140 #define FUNCTION_FLUSH_ADAPTER_CACHE 0x0809
141 #define FUNCTION_GET_FIRMWARE_STATUS 0x080A
142 #define FUNCTION_HARDWARE_RESET 0x080B
143 /* ARECA IO CONTROL CODE*/
144 #define ARCMSR_MESSAGE_READ_RQBUFFER \
145 ARECA_SATA_RAID | FUNCTION_READ_RQBUFFER
146 #define ARCMSR_MESSAGE_WRITE_WQBUFFER \
147 ARECA_SATA_RAID | FUNCTION_WRITE_WQBUFFER
148 #define ARCMSR_MESSAGE_CLEAR_RQBUFFER \
149 ARECA_SATA_RAID | FUNCTION_CLEAR_RQBUFFER
150 #define ARCMSR_MESSAGE_CLEAR_WQBUFFER \
151 ARECA_SATA_RAID | FUNCTION_CLEAR_WQBUFFER
152 #define ARCMSR_MESSAGE_CLEAR_ALLQBUFFER \
153 ARECA_SATA_RAID | FUNCTION_CLEAR_ALLQBUFFER
154 #define ARCMSR_MESSAGE_RETURN_CODE_3F \
155 ARECA_SATA_RAID | FUNCTION_RETURN_CODE_3F
156 #define ARCMSR_MESSAGE_SAY_HELLO \
157 ARECA_SATA_RAID | FUNCTION_SAY_HELLO
158 #define ARCMSR_MESSAGE_SAY_GOODBYE \
159 ARECA_SATA_RAID | FUNCTION_SAY_GOODBYE
160 #define ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE \
161 ARECA_SATA_RAID | FUNCTION_FLUSH_ADAPTER_CACHE
162 /* ARECA IOCTL ReturnCode */
163 #define ARCMSR_MESSAGE_RETURNCODE_OK 0x00000001
164 #define ARCMSR_MESSAGE_RETURNCODE_ERROR 0x00000006
165 #define ARCMSR_MESSAGE_RETURNCODE_3F 0x0000003F
166 #define ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON 0x00000088
168 *************************************************************
169 ** structure for holding DMA address data
170 *************************************************************
172 #define IS_DMA64 (sizeof(dma_addr_t) == 8)
173 #define IS_SG64_ADDR 0x01000000 /* bit24 */
178 }__attribute__ ((packed));
184 }__attribute__ ((packed));
186 ********************************************************************
187 ** Q Buffer of IOP Message Transfer
188 ********************************************************************
196 *******************************************************************************
197 ** FIRMWARE INFO for Intel IOP R 80331 processor (Type A)
198 *******************************************************************************
202 uint32_t signature; /*0, 00-03*/
203 uint32_t request_len; /*1, 04-07*/
204 uint32_t numbers_queue; /*2, 08-11*/
205 uint32_t sdram_size; /*3, 12-15*/
206 uint32_t ide_channels; /*4, 16-19*/
207 char vendor[40]; /*5, 20-59*/
208 char model[8]; /*15, 60-67*/
209 char firmware_ver[16]; /*17, 68-83*/
210 char device_map[16]; /*21, 84-99*/
211 uint32_t cfgVersion; /*25,100-103 Added for checking of new firmware capability*/
212 uint8_t cfgSerial[16]; /*26,104-119*/
213 uint32_t cfgPicStatus; /*30,120-123*/
215 /* signature of set and get firmware config */
216 #define ARCMSR_SIGNATURE_GET_CONFIG 0x87974060
217 #define ARCMSR_SIGNATURE_SET_CONFIG 0x87974063
218 /* message code of inbound message register */
219 #define ARCMSR_INBOUND_MESG0_NOP 0x00000000
220 #define ARCMSR_INBOUND_MESG0_GET_CONFIG 0x00000001
221 #define ARCMSR_INBOUND_MESG0_SET_CONFIG 0x00000002
222 #define ARCMSR_INBOUND_MESG0_ABORT_CMD 0x00000003
223 #define ARCMSR_INBOUND_MESG0_STOP_BGRB 0x00000004
224 #define ARCMSR_INBOUND_MESG0_FLUSH_CACHE 0x00000005
225 #define ARCMSR_INBOUND_MESG0_START_BGRB 0x00000006
226 #define ARCMSR_INBOUND_MESG0_CHK331PENDING 0x00000007
227 #define ARCMSR_INBOUND_MESG0_SYNC_TIMER 0x00000008
228 /* doorbell interrupt generator */
229 #define ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK 0x00000001
230 #define ARCMSR_INBOUND_DRIVER_DATA_READ_OK 0x00000002
231 #define ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK 0x00000001
232 #define ARCMSR_OUTBOUND_IOP331_DATA_READ_OK 0x00000002
233 /* ccb areca cdb flag */
234 #define ARCMSR_CCBPOST_FLAG_SGL_BSIZE 0x80000000
235 #define ARCMSR_CCBPOST_FLAG_IAM_BIOS 0x40000000
236 #define ARCMSR_CCBREPLY_FLAG_IAM_BIOS 0x40000000
237 #define ARCMSR_CCBREPLY_FLAG_ERROR_MODE0 0x10000000
238 #define ARCMSR_CCBREPLY_FLAG_ERROR_MODE1 0x00000001
239 /* outbound firmware ok */
240 #define ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK 0x80000000
241 /* ARC-1680 Bus Reset*/
242 #define ARCMSR_ARC1680_BUS_RESET 0x00000003
243 /* ARC-1880 Bus Reset*/
244 #define ARCMSR_ARC1880_RESET_ADAPTER 0x00000024
245 #define ARCMSR_ARC1880_DiagWrite_ENABLE 0x00000080
248 ************************************************************************
249 ** SPEC. for Areca Type B adapter
250 ************************************************************************
252 /* ARECA HBB COMMAND for its FIRMWARE */
253 /* window of "instruction flags" from driver to iop */
254 #define ARCMSR_DRV2IOP_DOORBELL 0x00020400
255 #define ARCMSR_DRV2IOP_DOORBELL_MASK 0x00020404
256 /* window of "instruction flags" from iop to driver */
257 #define ARCMSR_IOP2DRV_DOORBELL 0x00020408
258 #define ARCMSR_IOP2DRV_DOORBELL_MASK 0x0002040C
259 /* window of "instruction flags" from iop to driver */
260 #define ARCMSR_IOP2DRV_DOORBELL_1203 0x00021870
261 #define ARCMSR_IOP2DRV_DOORBELL_MASK_1203 0x00021874
262 /* window of "instruction flags" from driver to iop */
263 #define ARCMSR_DRV2IOP_DOORBELL_1203 0x00021878
264 #define ARCMSR_DRV2IOP_DOORBELL_MASK_1203 0x0002187C
265 /* ARECA FLAG LANGUAGE */
267 #define ARCMSR_IOP2DRV_DATA_WRITE_OK 0x00000001
269 #define ARCMSR_IOP2DRV_DATA_READ_OK 0x00000002
270 #define ARCMSR_IOP2DRV_CDB_DONE 0x00000004
271 #define ARCMSR_IOP2DRV_MESSAGE_CMD_DONE 0x00000008
273 #define ARCMSR_DOORBELL_HANDLE_INT 0x0000000F
274 #define ARCMSR_DOORBELL_INT_CLEAR_PATTERN 0xFF00FFF0
275 #define ARCMSR_MESSAGE_INT_CLEAR_PATTERN 0xFF00FFF7
276 /* (ARCMSR_INBOUND_MESG0_GET_CONFIG<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
277 #define ARCMSR_MESSAGE_GET_CONFIG 0x00010008
278 /* (ARCMSR_INBOUND_MESG0_SET_CONFIG<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
279 #define ARCMSR_MESSAGE_SET_CONFIG 0x00020008
280 /* (ARCMSR_INBOUND_MESG0_ABORT_CMD<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
281 #define ARCMSR_MESSAGE_ABORT_CMD 0x00030008
282 /* (ARCMSR_INBOUND_MESG0_STOP_BGRB<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
283 #define ARCMSR_MESSAGE_STOP_BGRB 0x00040008
284 /* (ARCMSR_INBOUND_MESG0_FLUSH_CACHE<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
285 #define ARCMSR_MESSAGE_FLUSH_CACHE 0x00050008
286 /* (ARCMSR_INBOUND_MESG0_START_BGRB<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
287 #define ARCMSR_MESSAGE_START_BGRB 0x00060008
288 #define ARCMSR_MESSAGE_SYNC_TIMER 0x00080008
289 #define ARCMSR_MESSAGE_START_DRIVER_MODE 0x000E0008
290 #define ARCMSR_MESSAGE_SET_POST_WINDOW 0x000F0008
291 #define ARCMSR_MESSAGE_ACTIVE_EOI_MODE 0x00100008
292 /* ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK */
293 #define ARCMSR_MESSAGE_FIRMWARE_OK 0x80000000
295 #define ARCMSR_DRV2IOP_DATA_WRITE_OK 0x00000001
297 #define ARCMSR_DRV2IOP_DATA_READ_OK 0x00000002
298 #define ARCMSR_DRV2IOP_CDB_POSTED 0x00000004
299 #define ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED 0x00000008
300 #define ARCMSR_DRV2IOP_END_OF_INTERRUPT 0x00000010
302 /* data tunnel buffer between user space program and its firmware */
303 /* user space data to iop 128bytes */
304 #define ARCMSR_MESSAGE_WBUFFER 0x0000fe00
305 /* iop data to user space 128bytes */
306 #define ARCMSR_MESSAGE_RBUFFER 0x0000ff00
307 /* iop message_rwbuffer for message command */
308 #define ARCMSR_MESSAGE_RWBUFFER 0x0000fa00
310 #define MEM_BASE0(x) (u32 __iomem *)((unsigned long)acb->mem_base0 + x)
311 #define MEM_BASE1(x) (u32 __iomem *)((unsigned long)acb->mem_base1 + x)
313 ************************************************************************
314 ** SPEC. for Areca HBC adapter
315 ************************************************************************
317 #define ARCMSR_HBC_ISR_THROTTLING_LEVEL 12
318 #define ARCMSR_HBC_ISR_MAX_DONE_QUEUE 20
319 /* Host Interrupt Mask */
320 #define ARCMSR_HBCMU_UTILITY_A_ISR_MASK 0x00000001 /* When clear, the Utility_A interrupt routes to the host.*/
321 #define ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR_MASK 0x00000004 /* When clear, the General Outbound Doorbell interrupt routes to the host.*/
322 #define ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR_MASK 0x00000008 /* When clear, the Outbound Post List FIFO Not Empty interrupt routes to the host.*/
323 #define ARCMSR_HBCMU_ALL_INTMASKENABLE 0x0000000D /* disable all ISR */
324 /* Host Interrupt Status */
325 #define ARCMSR_HBCMU_UTILITY_A_ISR 0x00000001
327 ** Set when the Utility_A Interrupt bit is set in the Outbound Doorbell Register.
328 ** It clears by writing a 1 to the Utility_A bit in the Outbound Doorbell Clear Register or through automatic clearing (if enabled).
330 #define ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR 0x00000004
332 ** Set if Outbound Doorbell register bits 30:1 have a non-zero
333 ** value. This bit clears only when Outbound Doorbell bits
334 ** 30:1 are ALL clear. Only a write to the Outbound Doorbell
335 ** Clear register clears bits in the Outbound Doorbell register.
337 #define ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR 0x00000008
339 ** Set whenever the Outbound Post List Producer/Consumer
340 ** Register (FIFO) is not empty. It clears when the Outbound
341 ** Post List FIFO is empty.
343 #define ARCMSR_HBCMU_SAS_ALL_INT 0x00000010
345 ** This bit indicates a SAS interrupt from a source external to
346 ** the PCIe core. This bit is not maskable.
349 #define ARCMSR_HBCMU_DRV2IOP_DATA_WRITE_OK 0x00000002
350 #define ARCMSR_HBCMU_DRV2IOP_DATA_READ_OK 0x00000004
351 /*inbound message 0 ready*/
352 #define ARCMSR_HBCMU_DRV2IOP_MESSAGE_CMD_DONE 0x00000008
353 /*more than 12 request completed in a time*/
354 #define ARCMSR_HBCMU_DRV2IOP_POSTQUEUE_THROTTLING 0x00000010
355 #define ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_OK 0x00000002
356 /*outbound DATA WRITE isr door bell clear*/
357 #define ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_DOORBELL_CLEAR 0x00000002
358 #define ARCMSR_HBCMU_IOP2DRV_DATA_READ_OK 0x00000004
359 /*outbound DATA READ isr door bell clear*/
360 #define ARCMSR_HBCMU_IOP2DRV_DATA_READ_DOORBELL_CLEAR 0x00000004
361 /*outbound message 0 ready*/
362 #define ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE 0x00000008
363 /*outbound message cmd isr door bell clear*/
364 #define ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE_DOORBELL_CLEAR 0x00000008
365 /*ARCMSR_HBAMU_MESSAGE_FIRMWARE_OK*/
366 #define ARCMSR_HBCMU_MESSAGE_FIRMWARE_OK 0x80000000
368 *******************************************************************************
369 ** SPEC. for Areca Type D adapter
370 *******************************************************************************
372 #define ARCMSR_ARC1214_CHIP_ID 0x00004
373 #define ARCMSR_ARC1214_CPU_MEMORY_CONFIGURATION 0x00008
374 #define ARCMSR_ARC1214_I2_HOST_INTERRUPT_MASK 0x00034
375 #define ARCMSR_ARC1214_SAMPLE_RESET 0x00100
376 #define ARCMSR_ARC1214_RESET_REQUEST 0x00108
377 #define ARCMSR_ARC1214_MAIN_INTERRUPT_STATUS 0x00200
378 #define ARCMSR_ARC1214_PCIE_F0_INTERRUPT_ENABLE 0x0020C
379 #define ARCMSR_ARC1214_INBOUND_MESSAGE0 0x00400
380 #define ARCMSR_ARC1214_INBOUND_MESSAGE1 0x00404
381 #define ARCMSR_ARC1214_OUTBOUND_MESSAGE0 0x00420
382 #define ARCMSR_ARC1214_OUTBOUND_MESSAGE1 0x00424
383 #define ARCMSR_ARC1214_INBOUND_DOORBELL 0x00460
384 #define ARCMSR_ARC1214_OUTBOUND_DOORBELL 0x00480
385 #define ARCMSR_ARC1214_OUTBOUND_DOORBELL_ENABLE 0x00484
386 #define ARCMSR_ARC1214_INBOUND_LIST_BASE_LOW 0x01000
387 #define ARCMSR_ARC1214_INBOUND_LIST_BASE_HIGH 0x01004
388 #define ARCMSR_ARC1214_INBOUND_LIST_WRITE_POINTER 0x01018
389 #define ARCMSR_ARC1214_OUTBOUND_LIST_BASE_LOW 0x01060
390 #define ARCMSR_ARC1214_OUTBOUND_LIST_BASE_HIGH 0x01064
391 #define ARCMSR_ARC1214_OUTBOUND_LIST_COPY_POINTER 0x0106C
392 #define ARCMSR_ARC1214_OUTBOUND_LIST_READ_POINTER 0x01070
393 #define ARCMSR_ARC1214_OUTBOUND_INTERRUPT_CAUSE 0x01088
394 #define ARCMSR_ARC1214_OUTBOUND_INTERRUPT_ENABLE 0x0108C
395 #define ARCMSR_ARC1214_MESSAGE_WBUFFER 0x02000
396 #define ARCMSR_ARC1214_MESSAGE_RBUFFER 0x02100
397 #define ARCMSR_ARC1214_MESSAGE_RWBUFFER 0x02200
398 /* Host Interrupt Mask */
399 #define ARCMSR_ARC1214_ALL_INT_ENABLE 0x00001010
400 #define ARCMSR_ARC1214_ALL_INT_DISABLE 0x00000000
401 /* Host Interrupt Status */
402 #define ARCMSR_ARC1214_OUTBOUND_DOORBELL_ISR 0x00001000
403 #define ARCMSR_ARC1214_OUTBOUND_POSTQUEUE_ISR 0x00000010
405 #define ARCMSR_ARC1214_DRV2IOP_DATA_IN_READY 0x00000001
406 #define ARCMSR_ARC1214_DRV2IOP_DATA_OUT_READ 0x00000002
407 /*inbound message 0 ready*/
408 #define ARCMSR_ARC1214_IOP2DRV_DATA_WRITE_OK 0x00000001
409 /*outbound DATA WRITE isr door bell clear*/
410 #define ARCMSR_ARC1214_IOP2DRV_DATA_READ_OK 0x00000002
411 /*outbound message 0 ready*/
412 #define ARCMSR_ARC1214_IOP2DRV_MESSAGE_CMD_DONE 0x02000000
413 /*outbound message cmd isr door bell clear*/
414 /*ARCMSR_HBAMU_MESSAGE_FIRMWARE_OK*/
415 #define ARCMSR_ARC1214_MESSAGE_FIRMWARE_OK 0x80000000
416 #define ARCMSR_ARC1214_OUTBOUND_LIST_INTERRUPT_CLEAR 0x00000001
418 *******************************************************************************
419 ** SPEC. for Areca Type E adapter
420 *******************************************************************************
422 #define ARCMSR_SIGNATURE_1884 0x188417D3
424 #define ARCMSR_HBEMU_DRV2IOP_DATA_WRITE_OK 0x00000002
425 #define ARCMSR_HBEMU_DRV2IOP_DATA_READ_OK 0x00000004
426 #define ARCMSR_HBEMU_DRV2IOP_MESSAGE_CMD_DONE 0x00000008
428 #define ARCMSR_HBEMU_IOP2DRV_DATA_WRITE_OK 0x00000002
429 #define ARCMSR_HBEMU_IOP2DRV_DATA_READ_OK 0x00000004
430 #define ARCMSR_HBEMU_IOP2DRV_MESSAGE_CMD_DONE 0x00000008
432 #define ARCMSR_HBEMU_MESSAGE_FIRMWARE_OK 0x80000000
434 #define ARCMSR_HBEMU_OUTBOUND_DOORBELL_ISR 0x00000001
435 #define ARCMSR_HBEMU_OUTBOUND_POSTQUEUE_ISR 0x00000008
436 #define ARCMSR_HBEMU_ALL_INTMASKENABLE 0x00000009
438 /* ARC-1884 doorbell sync */
439 #define ARCMSR_HBEMU_DOORBELL_SYNC 0x100
440 #define ARCMSR_ARC188X_RESET_ADAPTER 0x00000004
441 #define ARCMSR_ARC1884_DiagWrite_ENABLE 0x00000080
444 *******************************************************************************
445 ** SPEC. for Areca Type F adapter
446 *******************************************************************************
448 #define ARCMSR_SIGNATURE_1886 0x188617D3
449 // Doorbell and interrupt definition are same as Type E adapter
450 /* ARC-1886 doorbell sync */
451 #define ARCMSR_HBFMU_DOORBELL_SYNC 0x100
452 //set host rw buffer physical address at inbound message 0, 1 (low,high)
453 #define ARCMSR_HBFMU_DOORBELL_SYNC1 0x300
454 #define ARCMSR_HBFMU_MESSAGE_FIRMWARE_OK 0x80000000
455 #define ARCMSR_HBFMU_MESSAGE_NO_VOLUME_CHANGE 0x20000000
458 *******************************************************************************
459 ** ARECA SCSI COMMAND DESCRIPTOR BLOCK size 0x1F8 (504)
460 *******************************************************************************
471 #define ARCMSR_CDB_FLAG_SGL_BSIZE 0x01
472 #define ARCMSR_CDB_FLAG_BIOS 0x02
473 #define ARCMSR_CDB_FLAG_WRITE 0x04
474 #define ARCMSR_CDB_FLAG_SIMPLEQ 0x00
475 #define ARCMSR_CDB_FLAG_HEADQ 0x08
476 #define ARCMSR_CDB_FLAG_ORDEREDQ 0x10
482 uint8_t DeviceStatus;
483 #define ARCMSR_DEV_CHECK_CONDITION 0x02
484 #define ARCMSR_DEV_SELECT_TIMEOUT 0xF0
485 #define ARCMSR_DEV_ABORTED 0xF1
486 #define ARCMSR_DEV_INIT_FAIL 0xF2
488 uint8_t SenseData[15];
491 struct SG32ENTRY sg32entry[1];
492 struct SG64ENTRY sg64entry[1];
496 *******************************************************************************
497 ** Messaging Unit (MU) of the Intel R 80331 I/O processor(Type A) and Type B processor
498 *******************************************************************************
502 uint32_t resrved0[4]; /*0000 000F*/
503 uint32_t inbound_msgaddr0; /*0010 0013*/
504 uint32_t inbound_msgaddr1; /*0014 0017*/
505 uint32_t outbound_msgaddr0; /*0018 001B*/
506 uint32_t outbound_msgaddr1; /*001C 001F*/
507 uint32_t inbound_doorbell; /*0020 0023*/
508 uint32_t inbound_intstatus; /*0024 0027*/
509 uint32_t inbound_intmask; /*0028 002B*/
510 uint32_t outbound_doorbell; /*002C 002F*/
511 uint32_t outbound_intstatus; /*0030 0033*/
512 uint32_t outbound_intmask; /*0034 0037*/
513 uint32_t reserved1[2]; /*0038 003F*/
514 uint32_t inbound_queueport; /*0040 0043*/
515 uint32_t outbound_queueport; /*0044 0047*/
516 uint32_t reserved2[2]; /*0048 004F*/
517 uint32_t reserved3[492]; /*0050 07FF 492*/
518 uint32_t reserved4[128]; /*0800 09FF 128*/
519 uint32_t message_rwbuffer[256]; /*0a00 0DFF 256*/
520 uint32_t message_wbuffer[32]; /*0E00 0E7F 32*/
521 uint32_t reserved5[32]; /*0E80 0EFF 32*/
522 uint32_t message_rbuffer[32]; /*0F00 0F7F 32*/
523 uint32_t reserved6[32]; /*0F80 0FFF 32*/
528 uint32_t post_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE];
529 uint32_t done_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE];
530 uint32_t postq_index;
531 uint32_t doneq_index;
532 uint32_t __iomem *drv2iop_doorbell;
533 uint32_t __iomem *drv2iop_doorbell_mask;
534 uint32_t __iomem *iop2drv_doorbell;
535 uint32_t __iomem *iop2drv_doorbell_mask;
536 uint32_t __iomem *message_rwbuffer;
537 uint32_t __iomem *message_wbuffer;
538 uint32_t __iomem *message_rbuffer;
541 *********************************************************************
543 *********************************************************************
545 struct MessageUnit_C{
546 uint32_t message_unit_status; /*0000 0003*/
547 uint32_t slave_error_attribute; /*0004 0007*/
548 uint32_t slave_error_address; /*0008 000B*/
549 uint32_t posted_outbound_doorbell; /*000C 000F*/
550 uint32_t master_error_attribute; /*0010 0013*/
551 uint32_t master_error_address_low; /*0014 0017*/
552 uint32_t master_error_address_high; /*0018 001B*/
553 uint32_t hcb_size; /*001C 001F*/
554 uint32_t inbound_doorbell; /*0020 0023*/
555 uint32_t diagnostic_rw_data; /*0024 0027*/
556 uint32_t diagnostic_rw_address_low; /*0028 002B*/
557 uint32_t diagnostic_rw_address_high; /*002C 002F*/
558 uint32_t host_int_status; /*0030 0033*/
559 uint32_t host_int_mask; /*0034 0037*/
560 uint32_t dcr_data; /*0038 003B*/
561 uint32_t dcr_address; /*003C 003F*/
562 uint32_t inbound_queueport; /*0040 0043*/
563 uint32_t outbound_queueport; /*0044 0047*/
564 uint32_t hcb_pci_address_low; /*0048 004B*/
565 uint32_t hcb_pci_address_high; /*004C 004F*/
566 uint32_t iop_int_status; /*0050 0053*/
567 uint32_t iop_int_mask; /*0054 0057*/
568 uint32_t iop_inbound_queue_port; /*0058 005B*/
569 uint32_t iop_outbound_queue_port; /*005C 005F*/
570 uint32_t inbound_free_list_index; /*0060 0063*/
571 uint32_t inbound_post_list_index; /*0064 0067*/
572 uint32_t outbound_free_list_index; /*0068 006B*/
573 uint32_t outbound_post_list_index; /*006C 006F*/
574 uint32_t inbound_doorbell_clear; /*0070 0073*/
575 uint32_t i2o_message_unit_control; /*0074 0077*/
576 uint32_t last_used_message_source_address_low; /*0078 007B*/
577 uint32_t last_used_message_source_address_high; /*007C 007F*/
578 uint32_t pull_mode_data_byte_count[4]; /*0080 008F*/
579 uint32_t message_dest_address_index; /*0090 0093*/
580 uint32_t done_queue_not_empty_int_counter_timer; /*0094 0097*/
581 uint32_t utility_A_int_counter_timer; /*0098 009B*/
582 uint32_t outbound_doorbell; /*009C 009F*/
583 uint32_t outbound_doorbell_clear; /*00A0 00A3*/
584 uint32_t message_source_address_index; /*00A4 00A7*/
585 uint32_t message_done_queue_index; /*00A8 00AB*/
586 uint32_t reserved0; /*00AC 00AF*/
587 uint32_t inbound_msgaddr0; /*00B0 00B3*/
588 uint32_t inbound_msgaddr1; /*00B4 00B7*/
589 uint32_t outbound_msgaddr0; /*00B8 00BB*/
590 uint32_t outbound_msgaddr1; /*00BC 00BF*/
591 uint32_t inbound_queueport_low; /*00C0 00C3*/
592 uint32_t inbound_queueport_high; /*00C4 00C7*/
593 uint32_t outbound_queueport_low; /*00C8 00CB*/
594 uint32_t outbound_queueport_high; /*00CC 00CF*/
595 uint32_t iop_inbound_queue_port_low; /*00D0 00D3*/
596 uint32_t iop_inbound_queue_port_high; /*00D4 00D7*/
597 uint32_t iop_outbound_queue_port_low; /*00D8 00DB*/
598 uint32_t iop_outbound_queue_port_high; /*00DC 00DF*/
599 uint32_t message_dest_queue_port_low; /*00E0 00E3*/
600 uint32_t message_dest_queue_port_high; /*00E4 00E7*/
601 uint32_t last_used_message_dest_address_low; /*00E8 00EB*/
602 uint32_t last_used_message_dest_address_high; /*00EC 00EF*/
603 uint32_t message_done_queue_base_address_low; /*00F0 00F3*/
604 uint32_t message_done_queue_base_address_high; /*00F4 00F7*/
605 uint32_t host_diagnostic; /*00F8 00FB*/
606 uint32_t write_sequence; /*00FC 00FF*/
607 uint32_t reserved1[34]; /*0100 0187*/
608 uint32_t reserved2[1950]; /*0188 1FFF*/
609 uint32_t message_wbuffer[32]; /*2000 207F*/
610 uint32_t reserved3[32]; /*2080 20FF*/
611 uint32_t message_rbuffer[32]; /*2100 217F*/
612 uint32_t reserved4[32]; /*2180 21FF*/
613 uint32_t msgcode_rwbuffer[256]; /*2200 23FF*/
616 *********************************************************************
617 ** Messaging Unit (MU) of Type D processor
618 *********************************************************************
621 uint32_t addressLow; /* pointer to SRB block */
622 uint32_t addressHigh;
623 uint32_t length; /* in DWORDs */
627 struct OutBound_SRB {
628 uint32_t addressLow; /* pointer to SRB block */
629 uint32_t addressHigh;
632 struct MessageUnit_D {
633 struct InBound_SRB post_qbuffer[ARCMSR_MAX_ARC1214_POSTQUEUE];
634 volatile struct OutBound_SRB
635 done_qbuffer[ARCMSR_MAX_ARC1214_DONEQUEUE];
637 volatile u16 doneq_index;
638 u32 __iomem *chip_id; /* 0x00004 */
639 u32 __iomem *cpu_mem_config; /* 0x00008 */
640 u32 __iomem *i2o_host_interrupt_mask; /* 0x00034 */
641 u32 __iomem *sample_at_reset; /* 0x00100 */
642 u32 __iomem *reset_request; /* 0x00108 */
643 u32 __iomem *host_int_status; /* 0x00200 */
644 u32 __iomem *pcief0_int_enable; /* 0x0020C */
645 u32 __iomem *inbound_msgaddr0; /* 0x00400 */
646 u32 __iomem *inbound_msgaddr1; /* 0x00404 */
647 u32 __iomem *outbound_msgaddr0; /* 0x00420 */
648 u32 __iomem *outbound_msgaddr1; /* 0x00424 */
649 u32 __iomem *inbound_doorbell; /* 0x00460 */
650 u32 __iomem *outbound_doorbell; /* 0x00480 */
651 u32 __iomem *outbound_doorbell_enable; /* 0x00484 */
652 u32 __iomem *inboundlist_base_low; /* 0x01000 */
653 u32 __iomem *inboundlist_base_high; /* 0x01004 */
654 u32 __iomem *inboundlist_write_pointer; /* 0x01018 */
655 u32 __iomem *outboundlist_base_low; /* 0x01060 */
656 u32 __iomem *outboundlist_base_high; /* 0x01064 */
657 u32 __iomem *outboundlist_copy_pointer; /* 0x0106C */
658 u32 __iomem *outboundlist_read_pointer; /* 0x01070 0x01072 */
659 u32 __iomem *outboundlist_interrupt_cause; /* 0x1088 */
660 u32 __iomem *outboundlist_interrupt_enable; /* 0x108C */
661 u32 __iomem *message_wbuffer; /* 0x2000 */
662 u32 __iomem *message_rbuffer; /* 0x2100 */
663 u32 __iomem *msgcode_rwbuffer; /* 0x2200 */
666 *********************************************************************
667 ** Messaging Unit (MU) of Type E processor(LSI)
668 *********************************************************************
670 struct MessageUnit_E{
671 uint32_t iobound_doorbell; /*0000 0003*/
672 uint32_t write_sequence_3xxx; /*0004 0007*/
673 uint32_t host_diagnostic_3xxx; /*0008 000B*/
674 uint32_t posted_outbound_doorbell; /*000C 000F*/
675 uint32_t master_error_attribute; /*0010 0013*/
676 uint32_t master_error_address_low; /*0014 0017*/
677 uint32_t master_error_address_high; /*0018 001B*/
678 uint32_t hcb_size; /*001C 001F*/
679 uint32_t inbound_doorbell; /*0020 0023*/
680 uint32_t diagnostic_rw_data; /*0024 0027*/
681 uint32_t diagnostic_rw_address_low; /*0028 002B*/
682 uint32_t diagnostic_rw_address_high; /*002C 002F*/
683 uint32_t host_int_status; /*0030 0033*/
684 uint32_t host_int_mask; /*0034 0037*/
685 uint32_t dcr_data; /*0038 003B*/
686 uint32_t dcr_address; /*003C 003F*/
687 uint32_t inbound_queueport; /*0040 0043*/
688 uint32_t outbound_queueport; /*0044 0047*/
689 uint32_t hcb_pci_address_low; /*0048 004B*/
690 uint32_t hcb_pci_address_high; /*004C 004F*/
691 uint32_t iop_int_status; /*0050 0053*/
692 uint32_t iop_int_mask; /*0054 0057*/
693 uint32_t iop_inbound_queue_port; /*0058 005B*/
694 uint32_t iop_outbound_queue_port; /*005C 005F*/
695 uint32_t inbound_free_list_index; /*0060 0063*/
696 uint32_t inbound_post_list_index; /*0064 0067*/
697 uint32_t reply_post_producer_index; /*0068 006B*/
698 uint32_t reply_post_consumer_index; /*006C 006F*/
699 uint32_t inbound_doorbell_clear; /*0070 0073*/
700 uint32_t i2o_message_unit_control; /*0074 0077*/
701 uint32_t last_used_message_source_address_low; /*0078 007B*/
702 uint32_t last_used_message_source_address_high; /*007C 007F*/
703 uint32_t pull_mode_data_byte_count[4]; /*0080 008F*/
704 uint32_t message_dest_address_index; /*0090 0093*/
705 uint32_t done_queue_not_empty_int_counter_timer; /*0094 0097*/
706 uint32_t utility_A_int_counter_timer; /*0098 009B*/
707 uint32_t outbound_doorbell; /*009C 009F*/
708 uint32_t outbound_doorbell_clear; /*00A0 00A3*/
709 uint32_t message_source_address_index; /*00A4 00A7*/
710 uint32_t message_done_queue_index; /*00A8 00AB*/
711 uint32_t reserved0; /*00AC 00AF*/
712 uint32_t inbound_msgaddr0; /*00B0 00B3*/
713 uint32_t inbound_msgaddr1; /*00B4 00B7*/
714 uint32_t outbound_msgaddr0; /*00B8 00BB*/
715 uint32_t outbound_msgaddr1; /*00BC 00BF*/
716 uint32_t inbound_queueport_low; /*00C0 00C3*/
717 uint32_t inbound_queueport_high; /*00C4 00C7*/
718 uint32_t outbound_queueport_low; /*00C8 00CB*/
719 uint32_t outbound_queueport_high; /*00CC 00CF*/
720 uint32_t iop_inbound_queue_port_low; /*00D0 00D3*/
721 uint32_t iop_inbound_queue_port_high; /*00D4 00D7*/
722 uint32_t iop_outbound_queue_port_low; /*00D8 00DB*/
723 uint32_t iop_outbound_queue_port_high; /*00DC 00DF*/
724 uint32_t message_dest_queue_port_low; /*00E0 00E3*/
725 uint32_t message_dest_queue_port_high; /*00E4 00E7*/
726 uint32_t last_used_message_dest_address_low; /*00E8 00EB*/
727 uint32_t last_used_message_dest_address_high; /*00EC 00EF*/
728 uint32_t message_done_queue_base_address_low; /*00F0 00F3*/
729 uint32_t message_done_queue_base_address_high; /*00F4 00F7*/
730 uint32_t host_diagnostic; /*00F8 00FB*/
731 uint32_t write_sequence; /*00FC 00FF*/
732 uint32_t reserved1[34]; /*0100 0187*/
733 uint32_t reserved2[1950]; /*0188 1FFF*/
734 uint32_t message_wbuffer[32]; /*2000 207F*/
735 uint32_t reserved3[32]; /*2080 20FF*/
736 uint32_t message_rbuffer[32]; /*2100 217F*/
737 uint32_t reserved4[32]; /*2180 21FF*/
738 uint32_t msgcode_rwbuffer[256]; /*2200 23FF*/
742 *********************************************************************
743 ** Messaging Unit (MU) of Type F processor(LSI)
744 *********************************************************************
746 struct MessageUnit_F {
747 uint32_t iobound_doorbell; /*0000 0003*/
748 uint32_t write_sequence_3xxx; /*0004 0007*/
749 uint32_t host_diagnostic_3xxx; /*0008 000B*/
750 uint32_t posted_outbound_doorbell; /*000C 000F*/
751 uint32_t master_error_attribute; /*0010 0013*/
752 uint32_t master_error_address_low; /*0014 0017*/
753 uint32_t master_error_address_high; /*0018 001B*/
754 uint32_t hcb_size; /*001C 001F*/
755 uint32_t inbound_doorbell; /*0020 0023*/
756 uint32_t diagnostic_rw_data; /*0024 0027*/
757 uint32_t diagnostic_rw_address_low; /*0028 002B*/
758 uint32_t diagnostic_rw_address_high; /*002C 002F*/
759 uint32_t host_int_status; /*0030 0033*/
760 uint32_t host_int_mask; /*0034 0037*/
761 uint32_t dcr_data; /*0038 003B*/
762 uint32_t dcr_address; /*003C 003F*/
763 uint32_t inbound_queueport; /*0040 0043*/
764 uint32_t outbound_queueport; /*0044 0047*/
765 uint32_t hcb_pci_address_low; /*0048 004B*/
766 uint32_t hcb_pci_address_high; /*004C 004F*/
767 uint32_t iop_int_status; /*0050 0053*/
768 uint32_t iop_int_mask; /*0054 0057*/
769 uint32_t iop_inbound_queue_port; /*0058 005B*/
770 uint32_t iop_outbound_queue_port; /*005C 005F*/
771 uint32_t inbound_free_list_index; /*0060 0063*/
772 uint32_t inbound_post_list_index; /*0064 0067*/
773 uint32_t reply_post_producer_index; /*0068 006B*/
774 uint32_t reply_post_consumer_index; /*006C 006F*/
775 uint32_t inbound_doorbell_clear; /*0070 0073*/
776 uint32_t i2o_message_unit_control; /*0074 0077*/
777 uint32_t last_used_message_source_address_low; /*0078 007B*/
778 uint32_t last_used_message_source_address_high; /*007C 007F*/
779 uint32_t pull_mode_data_byte_count[4]; /*0080 008F*/
780 uint32_t message_dest_address_index; /*0090 0093*/
781 uint32_t done_queue_not_empty_int_counter_timer; /*0094 0097*/
782 uint32_t utility_A_int_counter_timer; /*0098 009B*/
783 uint32_t outbound_doorbell; /*009C 009F*/
784 uint32_t outbound_doorbell_clear; /*00A0 00A3*/
785 uint32_t message_source_address_index; /*00A4 00A7*/
786 uint32_t message_done_queue_index; /*00A8 00AB*/
787 uint32_t reserved0; /*00AC 00AF*/
788 uint32_t inbound_msgaddr0; /*00B0 00B3*/
789 uint32_t inbound_msgaddr1; /*00B4 00B7*/
790 uint32_t outbound_msgaddr0; /*00B8 00BB*/
791 uint32_t outbound_msgaddr1; /*00BC 00BF*/
792 uint32_t inbound_queueport_low; /*00C0 00C3*/
793 uint32_t inbound_queueport_high; /*00C4 00C7*/
794 uint32_t outbound_queueport_low; /*00C8 00CB*/
795 uint32_t outbound_queueport_high; /*00CC 00CF*/
796 uint32_t iop_inbound_queue_port_low; /*00D0 00D3*/
797 uint32_t iop_inbound_queue_port_high; /*00D4 00D7*/
798 uint32_t iop_outbound_queue_port_low; /*00D8 00DB*/
799 uint32_t iop_outbound_queue_port_high; /*00DC 00DF*/
800 uint32_t message_dest_queue_port_low; /*00E0 00E3*/
801 uint32_t message_dest_queue_port_high; /*00E4 00E7*/
802 uint32_t last_used_message_dest_address_low; /*00E8 00EB*/
803 uint32_t last_used_message_dest_address_high; /*00EC 00EF*/
804 uint32_t message_done_queue_base_address_low; /*00F0 00F3*/
805 uint32_t message_done_queue_base_address_high; /*00F4 00F7*/
806 uint32_t host_diagnostic; /*00F8 00FB*/
807 uint32_t write_sequence; /*00FC 00FF*/
808 uint32_t reserved1[46]; /*0100 01B7*/
809 uint32_t reply_post_producer_index1; /*01B8 01BB*/
810 uint32_t reply_post_consumer_index1; /*01BC 01BF*/
813 #define MESG_RW_BUFFER_SIZE (256 * 3)
815 typedef struct deliver_completeQ {
818 uint16_t cmdLMID; // reserved (0)
819 uint16_t cmdFlag2; // reserved (0)
820 } DeliverQ, CompletionQ, *pDeliver_Q, *pCompletion_Q;
822 *******************************************************************************
823 ** Adapter Control Block
824 *******************************************************************************
826 struct AdapterControlBlock
828 uint32_t adapter_type; /* adapter A,B..... */
829 #define ACB_ADAPTER_TYPE_A 0x00000000 /* hba I IOP */
830 #define ACB_ADAPTER_TYPE_B 0x00000001 /* hbb M IOP */
831 #define ACB_ADAPTER_TYPE_C 0x00000002 /* hbc L IOP */
832 #define ACB_ADAPTER_TYPE_D 0x00000003 /* hbd M IOP */
833 #define ACB_ADAPTER_TYPE_E 0x00000004 /* hba L IOP */
834 #define ACB_ADAPTER_TYPE_F 0x00000005 /* hba L IOP */
836 struct pci_dev * pdev;
837 struct Scsi_Host * host;
838 unsigned long vir2phy_offset;
839 /* Offset is used in making arc cdb physical to virtual calculations */
840 uint32_t outbound_int_enable;
841 uint32_t cdb_phyaddr_hi32;
842 uint32_t reg_mu_acc_handle0;
843 uint64_t cdb_phyadd_hipart;
845 spinlock_t ccblist_lock;
846 spinlock_t postq_lock;
847 spinlock_t doneq_lock;
848 spinlock_t rqbuffer_lock;
849 spinlock_t wqbuffer_lock;
851 struct MessageUnit_A __iomem *pmuA;
852 struct MessageUnit_B *pmuB;
853 struct MessageUnit_C __iomem *pmuC;
854 struct MessageUnit_D *pmuD;
855 struct MessageUnit_E __iomem *pmuE;
856 struct MessageUnit_F __iomem *pmuF;
858 /* message unit ATU inbound base address0 */
859 void __iomem *mem_base0;
860 void __iomem *mem_base1;
861 //0x000 - COMPORT_IN (Host sent to ROC)
862 uint32_t *message_wbuffer;
863 //0x100 - COMPORT_OUT (ROC sent to Host)
864 uint32_t *message_rbuffer;
865 uint32_t *msgcode_rwbuffer; //0x200 - BIOS_AREA
868 uint8_t adapter_index;
869 #define ACB_F_SCSISTOPADAPTER 0x0001
870 #define ACB_F_MSG_STOP_BGRB 0x0002
871 /* stop RAID background rebuild */
872 #define ACB_F_MSG_START_BGRB 0x0004
873 /* stop RAID background rebuild */
874 #define ACB_F_IOPDATA_OVERFLOW 0x0008
875 /* iop message data rqbuffer overflow */
876 #define ACB_F_MESSAGE_WQBUFFER_CLEARED 0x0010
877 /* message clear wqbuffer */
878 #define ACB_F_MESSAGE_RQBUFFER_CLEARED 0x0020
879 /* message clear rqbuffer */
880 #define ACB_F_MESSAGE_WQBUFFER_READED 0x0040
881 #define ACB_F_BUS_RESET 0x0080
883 #define ACB_F_IOP_INITED 0x0100
885 #define ACB_F_ABORT 0x0200
886 #define ACB_F_FIRMWARE_TRAP 0x0400
887 #define ACB_F_ADAPTER_REMOVED 0x0800
888 #define ACB_F_MSG_GET_CONFIG 0x1000
889 struct CommandControlBlock * pccb_pool[ARCMSR_MAX_FREECCB_NUM];
890 /* used for memory free */
891 struct list_head ccb_free_list;
892 /* head of free ccb list */
894 atomic_t ccboutstandingcount;
895 /*The present outstanding command number that in the IOP that
896 waiting for being handled by FW*/
899 /* dma_coherent used for memory free */
900 dma_addr_t dma_coherent_handle;
901 /* dma_coherent_handle used for memory free */
902 dma_addr_t dma_coherent_handle2;
904 unsigned int uncache_size;
905 uint8_t rqbuffer[ARCMSR_MAX_QBUFFER];
906 /* data collection buffer for read from 80331 */
907 int32_t rqbuf_getIndex;
908 /* first of read buffer */
909 int32_t rqbuf_putIndex;
910 /* last of read buffer */
911 uint8_t wqbuffer[ARCMSR_MAX_QBUFFER];
912 /* data collection buffer for write to 80331 */
913 int32_t wqbuf_getIndex;
914 /* first of write buffer */
915 int32_t wqbuf_putIndex;
916 /* last of write buffer */
917 uint8_t devstate[ARCMSR_MAX_TARGETID][ARCMSR_MAX_TARGETLUN];
918 /* id0 ..... id15, lun0...lun7 */
919 #define ARECA_RAID_GONE 0x55
920 #define ARECA_RAID_GOOD 0xaa
924 uint32_t firm_request_len;
925 uint32_t firm_numbers_queue;
926 uint32_t firm_sdram_size;
927 uint32_t firm_hd_channels;
928 uint32_t firm_cfg_version;
930 char firm_version[20];
931 char device_map[20]; /*21,84-99*/
932 struct work_struct arcmsr_do_message_isr_bh;
933 struct timer_list eternal_timer;
934 unsigned short fw_flag;
935 #define FW_NORMAL 0x0000
936 #define FW_BOG 0x0001
937 #define FW_DEADLOCK 0x0010
938 uint32_t maxOutstanding;
941 struct timer_list refresh_timer;
942 uint32_t doneq_index;
944 uint32_t in_doorbell;
945 uint32_t out_doorbell;
946 uint32_t completionQ_entry;
947 pCompletion_Q pCompletionQ;
948 uint32_t completeQ_size;
949 };/* HW_DEVICE_EXTENSION */
951 *******************************************************************************
952 ** Command Control Block
953 ** this CCB length must be 32 bytes boundary
954 *******************************************************************************
956 struct CommandControlBlock{
957 /*x32:sizeof struct_CCB=(64+60)byte, x64:sizeof struct_CCB=(64+60)byte*/
958 struct list_head list; /*x32: 8byte, x64: 16byte*/
959 struct scsi_cmnd *pcmd; /*8 bytes pointer of linux scsi command */
960 struct AdapterControlBlock *acb; /*x32: 4byte, x64: 8byte*/
961 unsigned long cdb_phyaddr; /*x32: 4byte, x64: 8byte*/
962 uint32_t arc_cdb_size; /*x32:4byte,x64:4byte*/
963 uint16_t ccb_flags; /*x32: 2byte, x64: 2byte*/
964 #define CCB_FLAG_READ 0x0000
965 #define CCB_FLAG_WRITE 0x0001
966 #define CCB_FLAG_ERROR 0x0002
967 #define CCB_FLAG_FLUSHCACHE 0x0004
968 #define CCB_FLAG_MASTER_ABORTED 0x0008
969 uint16_t startdone; /*x32:2byte,x32:2byte*/
970 #define ARCMSR_CCB_DONE 0x0000
971 #define ARCMSR_CCB_START 0x55AA
972 #define ARCMSR_CCB_ABORTED 0xAA55
973 #define ARCMSR_CCB_ILLEGAL 0xFFFF
975 #if BITS_PER_LONG == 64
976 /* ======================512+64 bytes======================== */
977 uint32_t reserved[3]; /*12 byte*/
979 /* ======================512+32 bytes======================== */
980 uint32_t reserved[8]; /*32 byte*/
982 /* ======================================================= */
983 struct ARCMSR_CDB arcmsr_cdb;
986 *******************************************************************************
987 ** ARECA SCSI sense data
988 *******************************************************************************
993 #define SCSI_SENSE_CURRENT_ERRORS 0x70
994 #define SCSI_SENSE_DEFERRED_ERRORS 0x71
996 uint8_t SegmentNumber;
999 uint8_t IncorrectLength:1;
1000 uint8_t EndOfMedia:1;
1002 uint8_t Information[4];
1003 uint8_t AdditionalSenseLength;
1004 uint8_t CommandSpecificInformation[4];
1005 uint8_t AdditionalSenseCode;
1006 uint8_t AdditionalSenseCodeQualifier;
1007 uint8_t FieldReplaceableUnitCode;
1008 uint8_t SenseKeySpecific[3];
1011 *******************************************************************************
1012 ** Outbound Interrupt Status Register - OISR
1013 *******************************************************************************
1015 #define ARCMSR_MU_OUTBOUND_INTERRUPT_STATUS_REG 0x30
1016 #define ARCMSR_MU_OUTBOUND_PCI_INT 0x10
1017 #define ARCMSR_MU_OUTBOUND_POSTQUEUE_INT 0x08
1018 #define ARCMSR_MU_OUTBOUND_DOORBELL_INT 0x04
1019 #define ARCMSR_MU_OUTBOUND_MESSAGE1_INT 0x02
1020 #define ARCMSR_MU_OUTBOUND_MESSAGE0_INT 0x01
1021 #define ARCMSR_MU_OUTBOUND_HANDLE_INT \
1022 (ARCMSR_MU_OUTBOUND_MESSAGE0_INT \
1023 |ARCMSR_MU_OUTBOUND_MESSAGE1_INT \
1024 |ARCMSR_MU_OUTBOUND_DOORBELL_INT \
1025 |ARCMSR_MU_OUTBOUND_POSTQUEUE_INT \
1026 |ARCMSR_MU_OUTBOUND_PCI_INT)
1028 *******************************************************************************
1029 ** Outbound Interrupt Mask Register - OIMR
1030 *******************************************************************************
1032 #define ARCMSR_MU_OUTBOUND_INTERRUPT_MASK_REG 0x34
1033 #define ARCMSR_MU_OUTBOUND_PCI_INTMASKENABLE 0x10
1034 #define ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE 0x08
1035 #define ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE 0x04
1036 #define ARCMSR_MU_OUTBOUND_MESSAGE1_INTMASKENABLE 0x02
1037 #define ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE 0x01
1038 #define ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE 0x1F
1040 extern void arcmsr_write_ioctldata2iop(struct AdapterControlBlock *);
1041 extern uint32_t arcmsr_Read_iop_rqbuffer_data(struct AdapterControlBlock *,
1042 struct QBUFFER __iomem *);
1043 extern void arcmsr_clear_iop2drv_rqueue_buffer(struct AdapterControlBlock *);
1044 extern struct QBUFFER __iomem *arcmsr_get_iop_rqbuffer(struct AdapterControlBlock *);
1045 extern const struct attribute_group *arcmsr_host_groups[];
1046 extern int arcmsr_alloc_sysfs_attr(struct AdapterControlBlock *);
1047 void arcmsr_free_sysfs_attr(struct AdapterControlBlock *acb);