scsi: arcmsr: Support new PCI device IDs 1883 and 1886
[platform/kernel/linux-starfive.git] / drivers / scsi / arcmsr / arcmsr.h
1 /*
2 *******************************************************************************
3 **        O.S   : Linux
4 **   FILE NAME  : arcmsr.h
5 **        BY    : Nick Cheng
6 **   Description: SCSI RAID Device Driver for
7 **                ARECA RAID Host adapter
8 *******************************************************************************
9 ** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved.
10 **
11 **     Web site: www.areca.com.tw
12 **       E-mail: support@areca.com.tw
13 **
14 ** This program is free software; you can redistribute it and/or modify
15 ** it under the terms of the GNU General Public License version 2 as
16 ** published by the Free Software Foundation.
17 ** This program is distributed in the hope that it will be useful,
18 ** but WITHOUT ANY WARRANTY; without even the implied warranty of
19 ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20 ** GNU General Public License for more details.
21 *******************************************************************************
22 ** Redistribution and use in source and binary forms, with or without
23 ** modification, are permitted provided that the following conditions
24 ** are met:
25 ** 1. Redistributions of source code must retain the above copyright
26 **    notice, this list of conditions and the following disclaimer.
27 ** 2. Redistributions in binary form must reproduce the above copyright
28 **    notice, this list of conditions and the following disclaimer in the
29 **    documentation and/or other materials provided with the distribution.
30 ** 3. The name of the author may not be used to endorse or promote products
31 **    derived from this software without specific prior written permission.
32 **
33 ** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
34 ** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
35 ** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
36 ** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
37 ** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT
38 ** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
39 ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY
40 ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
41 **(INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF
42 ** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
43 *******************************************************************************
44 */
45 #include <linux/interrupt.h>
46 struct device_attribute;
47 /*The limit of outstanding scsi command that firmware can handle*/
48 #define ARCMSR_NAME                     "arcmsr"
49 #define ARCMSR_MAX_FREECCB_NUM          1024
50 #define ARCMSR_MAX_OUTSTANDING_CMD      1024
51 #define ARCMSR_DEFAULT_OUTSTANDING_CMD  128
52 #define ARCMSR_MIN_OUTSTANDING_CMD      32
53 #define ARCMSR_DRIVER_VERSION           "v1.50.00.13-20230206"
54 #define ARCMSR_SCSI_INITIATOR_ID        255
55 #define ARCMSR_MAX_XFER_SECTORS         512
56 #define ARCMSR_MAX_XFER_SECTORS_B       4096
57 #define ARCMSR_MAX_XFER_SECTORS_C       304
58 #define ARCMSR_MAX_TARGETID             17
59 #define ARCMSR_MAX_TARGETLUN            8
60 #define ARCMSR_MAX_CMD_PERLUN           128
61 #define ARCMSR_DEFAULT_CMD_PERLUN       32
62 #define ARCMSR_MIN_CMD_PERLUN           1
63 #define ARCMSR_MAX_QBUFFER              4096
64 #define ARCMSR_DEFAULT_SG_ENTRIES       38
65 #define ARCMSR_MAX_HBB_POSTQUEUE        264
66 #define ARCMSR_MAX_ARC1214_POSTQUEUE    256
67 #define ARCMSR_MAX_ARC1214_DONEQUEUE    257
68 #define ARCMSR_MAX_HBE_DONEQUEUE        512
69 #define ARCMSR_MAX_XFER_LEN             0x26000 /* 152K */
70 #define ARCMSR_CDB_SG_PAGE_LENGTH       256
71 #define ARCMST_NUM_MSIX_VECTORS         4
72 #ifndef PCI_DEVICE_ID_ARECA_1880
73 #define PCI_DEVICE_ID_ARECA_1880        0x1880
74 #endif
75 #ifndef PCI_DEVICE_ID_ARECA_1214
76 #define PCI_DEVICE_ID_ARECA_1214        0x1214
77 #endif
78 #ifndef PCI_DEVICE_ID_ARECA_1203
79 #define PCI_DEVICE_ID_ARECA_1203        0x1203
80 #endif
81 #ifndef PCI_DEVICE_ID_ARECA_1883
82 #define PCI_DEVICE_ID_ARECA_1883        0x1883
83 #endif
84 #ifndef PCI_DEVICE_ID_ARECA_1884
85 #define PCI_DEVICE_ID_ARECA_1884        0x1884
86 #endif
87 #define PCI_DEVICE_ID_ARECA_1886_0      0x1886
88 #define PCI_DEVICE_ID_ARECA_1886        0x188A
89 #define ARCMSR_HOURS                    (1000 * 60 * 60 * 4)
90 #define ARCMSR_MINUTES                  (1000 * 60 * 60)
91 #define ARCMSR_DEFAULT_TIMEOUT          90
92 /*
93 **********************************************************************************
94 **
95 **********************************************************************************
96 */
97 #define ARC_SUCCESS     0
98 #define ARC_FAILURE     1
99 /*
100 *******************************************************************************
101 **        split 64bits dma addressing
102 *******************************************************************************
103 */
104 #define dma_addr_hi32(addr)     (uint32_t) ((addr>>16)>>16)
105 #define dma_addr_lo32(addr)     (uint32_t) (addr & 0xffffffff)
106 /*
107 *******************************************************************************
108 **        MESSAGE CONTROL CODE
109 *******************************************************************************
110 */
111 struct CMD_MESSAGE
112 {
113       uint32_t HeaderLength;
114       uint8_t  Signature[8];
115       uint32_t Timeout;
116       uint32_t ControlCode;
117       uint32_t ReturnCode;
118       uint32_t Length;
119 };
120 /*
121 *******************************************************************************
122 **        IOP Message Transfer Data for user space
123 *******************************************************************************
124 */
125 #define ARCMSR_API_DATA_BUFLEN  1032
126 struct CMD_MESSAGE_FIELD
127 {
128     struct CMD_MESSAGE                  cmdmessage;
129     uint8_t                             messagedatabuffer[ARCMSR_API_DATA_BUFLEN];
130 };
131 /* IOP message transfer */
132 #define ARCMSR_MESSAGE_FAIL                     0x0001
133 /* DeviceType */
134 #define ARECA_SATA_RAID                         0x90000000
135 /* FunctionCode */
136 #define FUNCTION_READ_RQBUFFER                  0x0801
137 #define FUNCTION_WRITE_WQBUFFER                 0x0802
138 #define FUNCTION_CLEAR_RQBUFFER                 0x0803
139 #define FUNCTION_CLEAR_WQBUFFER                 0x0804
140 #define FUNCTION_CLEAR_ALLQBUFFER               0x0805
141 #define FUNCTION_RETURN_CODE_3F                 0x0806
142 #define FUNCTION_SAY_HELLO                      0x0807
143 #define FUNCTION_SAY_GOODBYE                    0x0808
144 #define FUNCTION_FLUSH_ADAPTER_CACHE            0x0809
145 #define FUNCTION_GET_FIRMWARE_STATUS            0x080A
146 #define FUNCTION_HARDWARE_RESET                 0x080B
147 /* ARECA IO CONTROL CODE*/
148 #define ARCMSR_MESSAGE_READ_RQBUFFER       \
149         ARECA_SATA_RAID | FUNCTION_READ_RQBUFFER
150 #define ARCMSR_MESSAGE_WRITE_WQBUFFER      \
151         ARECA_SATA_RAID | FUNCTION_WRITE_WQBUFFER
152 #define ARCMSR_MESSAGE_CLEAR_RQBUFFER      \
153         ARECA_SATA_RAID | FUNCTION_CLEAR_RQBUFFER
154 #define ARCMSR_MESSAGE_CLEAR_WQBUFFER      \
155         ARECA_SATA_RAID | FUNCTION_CLEAR_WQBUFFER
156 #define ARCMSR_MESSAGE_CLEAR_ALLQBUFFER    \
157         ARECA_SATA_RAID | FUNCTION_CLEAR_ALLQBUFFER
158 #define ARCMSR_MESSAGE_RETURN_CODE_3F      \
159         ARECA_SATA_RAID | FUNCTION_RETURN_CODE_3F
160 #define ARCMSR_MESSAGE_SAY_HELLO           \
161         ARECA_SATA_RAID | FUNCTION_SAY_HELLO
162 #define ARCMSR_MESSAGE_SAY_GOODBYE         \
163         ARECA_SATA_RAID | FUNCTION_SAY_GOODBYE
164 #define ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE \
165         ARECA_SATA_RAID | FUNCTION_FLUSH_ADAPTER_CACHE
166 /* ARECA IOCTL ReturnCode */
167 #define ARCMSR_MESSAGE_RETURNCODE_OK            0x00000001
168 #define ARCMSR_MESSAGE_RETURNCODE_ERROR         0x00000006
169 #define ARCMSR_MESSAGE_RETURNCODE_3F            0x0000003F
170 #define ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON   0x00000088
171 /*
172 *************************************************************
173 **   structure for holding DMA address data
174 *************************************************************
175 */
176 #define IS_DMA64        (sizeof(dma_addr_t) == 8)
177 #define IS_SG64_ADDR    0x01000000 /* bit24 */
178 struct  SG32ENTRY
179 {
180         __le32          length;
181         __le32          address;
182 }__attribute__ ((packed));
183 struct  SG64ENTRY
184 {
185         __le32          length;
186         __le32          address;
187         __le32          addresshigh;
188 }__attribute__ ((packed));
189 /*
190 ********************************************************************
191 **      Q Buffer of IOP Message Transfer
192 ********************************************************************
193 */
194 struct QBUFFER
195 {
196         uint32_t      data_len;
197         uint8_t       data[124];
198 };
199 /*
200 *******************************************************************************
201 **      FIRMWARE INFO for Intel IOP R 80331 processor (Type A)
202 *******************************************************************************
203 */
204 struct FIRMWARE_INFO
205 {
206         uint32_t        signature;              /*0, 00-03*/
207         uint32_t        request_len;            /*1, 04-07*/
208         uint32_t        numbers_queue;          /*2, 08-11*/
209         uint32_t        sdram_size;             /*3, 12-15*/
210         uint32_t        ide_channels;           /*4, 16-19*/
211         char            vendor[40];             /*5, 20-59*/
212         char            model[8];               /*15, 60-67*/
213         char            firmware_ver[16];       /*17, 68-83*/
214         char            device_map[16];         /*21, 84-99*/
215         uint32_t        cfgVersion;             /*25,100-103 Added for checking of new firmware capability*/
216         uint8_t         cfgSerial[16];          /*26,104-119*/
217         uint32_t        cfgPicStatus;           /*30,120-123*/
218 };
219 /* signature of set and get firmware config */
220 #define ARCMSR_SIGNATURE_GET_CONFIG             0x87974060
221 #define ARCMSR_SIGNATURE_SET_CONFIG             0x87974063
222 /* message code of inbound message register */
223 #define ARCMSR_INBOUND_MESG0_NOP                0x00000000
224 #define ARCMSR_INBOUND_MESG0_GET_CONFIG         0x00000001
225 #define ARCMSR_INBOUND_MESG0_SET_CONFIG         0x00000002
226 #define ARCMSR_INBOUND_MESG0_ABORT_CMD          0x00000003
227 #define ARCMSR_INBOUND_MESG0_STOP_BGRB          0x00000004
228 #define ARCMSR_INBOUND_MESG0_FLUSH_CACHE        0x00000005
229 #define ARCMSR_INBOUND_MESG0_START_BGRB         0x00000006
230 #define ARCMSR_INBOUND_MESG0_CHK331PENDING      0x00000007
231 #define ARCMSR_INBOUND_MESG0_SYNC_TIMER         0x00000008
232 /* doorbell interrupt generator */
233 #define ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK     0x00000001
234 #define ARCMSR_INBOUND_DRIVER_DATA_READ_OK      0x00000002
235 #define ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK    0x00000001
236 #define ARCMSR_OUTBOUND_IOP331_DATA_READ_OK     0x00000002
237 /* ccb areca cdb flag */
238 #define ARCMSR_CCBPOST_FLAG_SGL_BSIZE           0x80000000
239 #define ARCMSR_CCBPOST_FLAG_IAM_BIOS            0x40000000
240 #define ARCMSR_CCBREPLY_FLAG_IAM_BIOS           0x40000000
241 #define ARCMSR_CCBREPLY_FLAG_ERROR_MODE0        0x10000000
242 #define ARCMSR_CCBREPLY_FLAG_ERROR_MODE1        0x00000001
243 /* outbound firmware ok */
244 #define ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK       0x80000000
245 /* ARC-1680 Bus Reset*/
246 #define ARCMSR_ARC1680_BUS_RESET                0x00000003
247 /* ARC-1880 Bus Reset*/
248 #define ARCMSR_ARC1880_RESET_ADAPTER            0x00000024
249 #define ARCMSR_ARC1880_DiagWrite_ENABLE         0x00000080
250
251 /*
252 ************************************************************************
253 **                SPEC. for Areca Type B adapter
254 ************************************************************************
255 */
256 /* ARECA HBB COMMAND for its FIRMWARE */
257 /* window of "instruction flags" from driver to iop */
258 #define ARCMSR_DRV2IOP_DOORBELL                       0x00020400
259 #define ARCMSR_DRV2IOP_DOORBELL_MASK                  0x00020404
260 /* window of "instruction flags" from iop to driver */
261 #define ARCMSR_IOP2DRV_DOORBELL                       0x00020408
262 #define ARCMSR_IOP2DRV_DOORBELL_MASK                  0x0002040C
263 /* window of "instruction flags" from iop to driver */
264 #define ARCMSR_IOP2DRV_DOORBELL_1203                  0x00021870
265 #define ARCMSR_IOP2DRV_DOORBELL_MASK_1203             0x00021874
266 /* window of "instruction flags" from driver to iop */
267 #define ARCMSR_DRV2IOP_DOORBELL_1203                  0x00021878
268 #define ARCMSR_DRV2IOP_DOORBELL_MASK_1203             0x0002187C
269 /* ARECA FLAG LANGUAGE */
270 /* ioctl transfer */
271 #define ARCMSR_IOP2DRV_DATA_WRITE_OK                  0x00000001
272 /* ioctl transfer */
273 #define ARCMSR_IOP2DRV_DATA_READ_OK                   0x00000002
274 #define ARCMSR_IOP2DRV_CDB_DONE                       0x00000004
275 #define ARCMSR_IOP2DRV_MESSAGE_CMD_DONE               0x00000008
276
277 #define ARCMSR_DOORBELL_HANDLE_INT                    0x0000000F
278 #define ARCMSR_DOORBELL_INT_CLEAR_PATTERN             0xFF00FFF0
279 #define ARCMSR_MESSAGE_INT_CLEAR_PATTERN              0xFF00FFF7
280 /* (ARCMSR_INBOUND_MESG0_GET_CONFIG<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
281 #define ARCMSR_MESSAGE_GET_CONFIG                     0x00010008
282 /* (ARCMSR_INBOUND_MESG0_SET_CONFIG<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
283 #define ARCMSR_MESSAGE_SET_CONFIG                     0x00020008
284 /* (ARCMSR_INBOUND_MESG0_ABORT_CMD<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
285 #define ARCMSR_MESSAGE_ABORT_CMD                      0x00030008
286 /* (ARCMSR_INBOUND_MESG0_STOP_BGRB<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
287 #define ARCMSR_MESSAGE_STOP_BGRB                      0x00040008
288 /* (ARCMSR_INBOUND_MESG0_FLUSH_CACHE<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
289 #define ARCMSR_MESSAGE_FLUSH_CACHE                    0x00050008
290 /* (ARCMSR_INBOUND_MESG0_START_BGRB<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
291 #define ARCMSR_MESSAGE_START_BGRB                     0x00060008
292 #define ARCMSR_MESSAGE_SYNC_TIMER                     0x00080008
293 #define ARCMSR_MESSAGE_START_DRIVER_MODE              0x000E0008
294 #define ARCMSR_MESSAGE_SET_POST_WINDOW                0x000F0008
295 #define ARCMSR_MESSAGE_ACTIVE_EOI_MODE                0x00100008
296 /* ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK */
297 #define ARCMSR_MESSAGE_FIRMWARE_OK                    0x80000000
298 /* ioctl transfer */
299 #define ARCMSR_DRV2IOP_DATA_WRITE_OK                  0x00000001
300 /* ioctl transfer */
301 #define ARCMSR_DRV2IOP_DATA_READ_OK                   0x00000002
302 #define ARCMSR_DRV2IOP_CDB_POSTED                     0x00000004
303 #define ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED             0x00000008
304 #define ARCMSR_DRV2IOP_END_OF_INTERRUPT               0x00000010
305
306 /* data tunnel buffer between user space program and its firmware */
307 /* user space data to iop 128bytes */
308 #define ARCMSR_MESSAGE_WBUFFER                        0x0000fe00
309 /* iop data to user space 128bytes */
310 #define ARCMSR_MESSAGE_RBUFFER                        0x0000ff00
311 /* iop message_rwbuffer for message command */
312 #define ARCMSR_MESSAGE_RWBUFFER                       0x0000fa00
313
314 #define MEM_BASE0(x)    (u32 __iomem *)((unsigned long)acb->mem_base0 + x)
315 #define MEM_BASE1(x)    (u32 __iomem *)((unsigned long)acb->mem_base1 + x)
316 /* 
317 ************************************************************************
318 **                SPEC. for Areca HBC adapter
319 ************************************************************************
320 */
321 #define ARCMSR_HBC_ISR_THROTTLING_LEVEL         12
322 #define ARCMSR_HBC_ISR_MAX_DONE_QUEUE           20
323 /* Host Interrupt Mask */
324 #define ARCMSR_HBCMU_UTILITY_A_ISR_MASK         0x00000001 /* When clear, the Utility_A interrupt routes to the host.*/
325 #define ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR_MASK 0x00000004 /* When clear, the General Outbound Doorbell interrupt routes to the host.*/
326 #define ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR_MASK        0x00000008 /* When clear, the Outbound Post List FIFO Not Empty interrupt routes to the host.*/
327 #define ARCMSR_HBCMU_ALL_INTMASKENABLE          0x0000000D /* disable all ISR */
328 /* Host Interrupt Status */
329 #define ARCMSR_HBCMU_UTILITY_A_ISR              0x00000001
330         /*
331         ** Set when the Utility_A Interrupt bit is set in the Outbound Doorbell Register.
332         ** It clears by writing a 1 to the Utility_A bit in the Outbound Doorbell Clear Register or through automatic clearing (if enabled).
333         */
334 #define ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR      0x00000004
335         /*
336         ** Set if Outbound Doorbell register bits 30:1 have a non-zero
337         ** value. This bit clears only when Outbound Doorbell bits
338         ** 30:1 are ALL clear. Only a write to the Outbound Doorbell
339         ** Clear register clears bits in the Outbound Doorbell register.
340         */
341 #define ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR     0x00000008
342         /*
343         ** Set whenever the Outbound Post List Producer/Consumer
344         ** Register (FIFO) is not empty. It clears when the Outbound
345         ** Post List FIFO is empty.
346         */
347 #define ARCMSR_HBCMU_SAS_ALL_INT                0x00000010
348         /*
349         ** This bit indicates a SAS interrupt from a source external to
350         ** the PCIe core. This bit is not maskable.
351         */
352         /* DoorBell*/
353 #define ARCMSR_HBCMU_DRV2IOP_DATA_WRITE_OK                      0x00000002
354 #define ARCMSR_HBCMU_DRV2IOP_DATA_READ_OK                       0x00000004
355         /*inbound message 0 ready*/
356 #define ARCMSR_HBCMU_DRV2IOP_MESSAGE_CMD_DONE                   0x00000008
357         /*more than 12 request completed in a time*/
358 #define ARCMSR_HBCMU_DRV2IOP_POSTQUEUE_THROTTLING               0x00000010
359 #define ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_OK                      0x00000002
360         /*outbound DATA WRITE isr door bell clear*/
361 #define ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_DOORBELL_CLEAR          0x00000002
362 #define ARCMSR_HBCMU_IOP2DRV_DATA_READ_OK                       0x00000004
363         /*outbound DATA READ isr door bell clear*/
364 #define ARCMSR_HBCMU_IOP2DRV_DATA_READ_DOORBELL_CLEAR           0x00000004
365         /*outbound message 0 ready*/
366 #define ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE                   0x00000008
367         /*outbound message cmd isr door bell clear*/
368 #define ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE_DOORBELL_CLEAR    0x00000008
369         /*ARCMSR_HBAMU_MESSAGE_FIRMWARE_OK*/
370 #define ARCMSR_HBCMU_MESSAGE_FIRMWARE_OK                        0x80000000
371 /*
372 *******************************************************************************
373 **                SPEC. for Areca Type D adapter
374 *******************************************************************************
375 */
376 #define ARCMSR_ARC1214_CHIP_ID                          0x00004
377 #define ARCMSR_ARC1214_CPU_MEMORY_CONFIGURATION         0x00008
378 #define ARCMSR_ARC1214_I2_HOST_INTERRUPT_MASK           0x00034
379 #define ARCMSR_ARC1214_SAMPLE_RESET                     0x00100
380 #define ARCMSR_ARC1214_RESET_REQUEST                    0x00108
381 #define ARCMSR_ARC1214_MAIN_INTERRUPT_STATUS            0x00200
382 #define ARCMSR_ARC1214_PCIE_F0_INTERRUPT_ENABLE         0x0020C
383 #define ARCMSR_ARC1214_INBOUND_MESSAGE0                 0x00400
384 #define ARCMSR_ARC1214_INBOUND_MESSAGE1                 0x00404
385 #define ARCMSR_ARC1214_OUTBOUND_MESSAGE0                0x00420
386 #define ARCMSR_ARC1214_OUTBOUND_MESSAGE1                0x00424
387 #define ARCMSR_ARC1214_INBOUND_DOORBELL                 0x00460
388 #define ARCMSR_ARC1214_OUTBOUND_DOORBELL                0x00480
389 #define ARCMSR_ARC1214_OUTBOUND_DOORBELL_ENABLE         0x00484
390 #define ARCMSR_ARC1214_INBOUND_LIST_BASE_LOW            0x01000
391 #define ARCMSR_ARC1214_INBOUND_LIST_BASE_HIGH           0x01004
392 #define ARCMSR_ARC1214_INBOUND_LIST_WRITE_POINTER       0x01018
393 #define ARCMSR_ARC1214_OUTBOUND_LIST_BASE_LOW           0x01060
394 #define ARCMSR_ARC1214_OUTBOUND_LIST_BASE_HIGH          0x01064
395 #define ARCMSR_ARC1214_OUTBOUND_LIST_COPY_POINTER       0x0106C
396 #define ARCMSR_ARC1214_OUTBOUND_LIST_READ_POINTER       0x01070
397 #define ARCMSR_ARC1214_OUTBOUND_INTERRUPT_CAUSE         0x01088
398 #define ARCMSR_ARC1214_OUTBOUND_INTERRUPT_ENABLE        0x0108C
399 #define ARCMSR_ARC1214_MESSAGE_WBUFFER                  0x02000
400 #define ARCMSR_ARC1214_MESSAGE_RBUFFER                  0x02100
401 #define ARCMSR_ARC1214_MESSAGE_RWBUFFER                 0x02200
402 /* Host Interrupt Mask */
403 #define ARCMSR_ARC1214_ALL_INT_ENABLE                   0x00001010
404 #define ARCMSR_ARC1214_ALL_INT_DISABLE                  0x00000000
405 /* Host Interrupt Status */
406 #define ARCMSR_ARC1214_OUTBOUND_DOORBELL_ISR            0x00001000
407 #define ARCMSR_ARC1214_OUTBOUND_POSTQUEUE_ISR           0x00000010
408 /* DoorBell*/
409 #define ARCMSR_ARC1214_DRV2IOP_DATA_IN_READY            0x00000001
410 #define ARCMSR_ARC1214_DRV2IOP_DATA_OUT_READ            0x00000002
411 /*inbound message 0 ready*/
412 #define ARCMSR_ARC1214_IOP2DRV_DATA_WRITE_OK            0x00000001
413 /*outbound DATA WRITE isr door bell clear*/
414 #define ARCMSR_ARC1214_IOP2DRV_DATA_READ_OK             0x00000002
415 /*outbound message 0 ready*/
416 #define ARCMSR_ARC1214_IOP2DRV_MESSAGE_CMD_DONE         0x02000000
417 /*outbound message cmd isr door bell clear*/
418 /*ARCMSR_HBAMU_MESSAGE_FIRMWARE_OK*/
419 #define ARCMSR_ARC1214_MESSAGE_FIRMWARE_OK              0x80000000
420 #define ARCMSR_ARC1214_OUTBOUND_LIST_INTERRUPT_CLEAR    0x00000001
421 /*
422 *******************************************************************************
423 **                SPEC. for Areca Type E adapter
424 *******************************************************************************
425 */
426 #define ARCMSR_SIGNATURE_1884                   0x188417D3
427
428 #define ARCMSR_HBEMU_DRV2IOP_DATA_WRITE_OK      0x00000002
429 #define ARCMSR_HBEMU_DRV2IOP_DATA_READ_OK       0x00000004
430 #define ARCMSR_HBEMU_DRV2IOP_MESSAGE_CMD_DONE   0x00000008
431
432 #define ARCMSR_HBEMU_IOP2DRV_DATA_WRITE_OK      0x00000002
433 #define ARCMSR_HBEMU_IOP2DRV_DATA_READ_OK       0x00000004
434 #define ARCMSR_HBEMU_IOP2DRV_MESSAGE_CMD_DONE   0x00000008
435
436 #define ARCMSR_HBEMU_MESSAGE_FIRMWARE_OK        0x80000000
437
438 #define ARCMSR_HBEMU_OUTBOUND_DOORBELL_ISR      0x00000001
439 #define ARCMSR_HBEMU_OUTBOUND_POSTQUEUE_ISR     0x00000008
440 #define ARCMSR_HBEMU_ALL_INTMASKENABLE          0x00000009
441
442 /* ARC-1884 doorbell sync */
443 #define ARCMSR_HBEMU_DOORBELL_SYNC              0x100
444 #define ARCMSR_ARC188X_RESET_ADAPTER            0x00000004
445 #define ARCMSR_ARC1884_DiagWrite_ENABLE         0x00000080
446
447 /*
448 *******************************************************************************
449 **                SPEC. for Areca Type F adapter
450 *******************************************************************************
451 */
452 #define ARCMSR_SIGNATURE_1886                   0x188617D3
453 // Doorbell and interrupt definition are same as Type E adapter
454 /* ARC-1886 doorbell sync */
455 #define ARCMSR_HBFMU_DOORBELL_SYNC              0x100
456 //set host rw buffer physical address at inbound message 0, 1 (low,high)
457 #define ARCMSR_HBFMU_DOORBELL_SYNC1             0x300
458 #define ARCMSR_HBFMU_MESSAGE_FIRMWARE_OK        0x80000000
459 #define ARCMSR_HBFMU_MESSAGE_NO_VOLUME_CHANGE   0x20000000
460
461 /*
462 *******************************************************************************
463 **    ARECA SCSI COMMAND DESCRIPTOR BLOCK size 0x1F8 (504)
464 *******************************************************************************
465 */
466 struct ARCMSR_CDB
467 {
468         uint8_t         Bus;
469         uint8_t         TargetID;
470         uint8_t         LUN;
471         uint8_t         Function;
472         uint8_t         CdbLength;
473         uint8_t         sgcount;
474         uint8_t         Flags;
475 #define ARCMSR_CDB_FLAG_SGL_BSIZE          0x01
476 #define ARCMSR_CDB_FLAG_BIOS               0x02
477 #define ARCMSR_CDB_FLAG_WRITE              0x04
478 #define ARCMSR_CDB_FLAG_SIMPLEQ            0x00
479 #define ARCMSR_CDB_FLAG_HEADQ              0x08
480 #define ARCMSR_CDB_FLAG_ORDEREDQ           0x10
481
482         uint8_t         msgPages;
483         uint32_t        msgContext;
484         uint32_t        DataLength;
485         uint8_t         Cdb[16];
486         uint8_t         DeviceStatus;
487 #define ARCMSR_DEV_CHECK_CONDITION          0x02
488 #define ARCMSR_DEV_SELECT_TIMEOUT           0xF0
489 #define ARCMSR_DEV_ABORTED                  0xF1
490 #define ARCMSR_DEV_INIT_FAIL                0xF2
491
492         uint8_t         SenseData[15];
493         union
494         {
495                 struct SG32ENTRY        sg32entry[1];
496                 struct SG64ENTRY        sg64entry[1];
497         } u;
498 };
499 /*
500 *******************************************************************************
501 **     Messaging Unit (MU) of the Intel R 80331 I/O processor(Type A) and Type B processor
502 *******************************************************************************
503 */
504 struct MessageUnit_A
505 {
506         uint32_t        resrved0[4];                    /*0000 000F*/
507         uint32_t        inbound_msgaddr0;               /*0010 0013*/
508         uint32_t        inbound_msgaddr1;               /*0014 0017*/
509         uint32_t        outbound_msgaddr0;              /*0018 001B*/
510         uint32_t        outbound_msgaddr1;              /*001C 001F*/
511         uint32_t        inbound_doorbell;               /*0020 0023*/
512         uint32_t        inbound_intstatus;              /*0024 0027*/
513         uint32_t        inbound_intmask;                /*0028 002B*/
514         uint32_t        outbound_doorbell;              /*002C 002F*/
515         uint32_t        outbound_intstatus;             /*0030 0033*/
516         uint32_t        outbound_intmask;               /*0034 0037*/
517         uint32_t        reserved1[2];                   /*0038 003F*/
518         uint32_t        inbound_queueport;              /*0040 0043*/
519         uint32_t        outbound_queueport;             /*0044 0047*/
520         uint32_t        reserved2[2];                   /*0048 004F*/
521         uint32_t        reserved3[492];                 /*0050 07FF 492*/
522         uint32_t        reserved4[128];                 /*0800 09FF 128*/
523         uint32_t        message_rwbuffer[256];          /*0a00 0DFF 256*/
524         uint32_t        message_wbuffer[32];            /*0E00 0E7F  32*/
525         uint32_t        reserved5[32];                  /*0E80 0EFF  32*/
526         uint32_t        message_rbuffer[32];            /*0F00 0F7F  32*/
527         uint32_t        reserved6[32];                  /*0F80 0FFF  32*/
528 };
529
530 struct MessageUnit_B
531 {
532         uint32_t        post_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE];
533         uint32_t        done_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE];
534         uint32_t        postq_index;
535         uint32_t        doneq_index;
536         uint32_t        __iomem *drv2iop_doorbell;
537         uint32_t        __iomem *drv2iop_doorbell_mask;
538         uint32_t        __iomem *iop2drv_doorbell;
539         uint32_t        __iomem *iop2drv_doorbell_mask;
540         uint32_t        __iomem *message_rwbuffer;
541         uint32_t        __iomem *message_wbuffer;
542         uint32_t        __iomem *message_rbuffer;
543 };
544 /*
545 *********************************************************************
546 ** LSI
547 *********************************************************************
548 */
549 struct MessageUnit_C{
550         uint32_t        message_unit_status;                    /*0000 0003*/
551         uint32_t        slave_error_attribute;                  /*0004 0007*/
552         uint32_t        slave_error_address;                    /*0008 000B*/
553         uint32_t        posted_outbound_doorbell;               /*000C 000F*/
554         uint32_t        master_error_attribute;                 /*0010 0013*/
555         uint32_t        master_error_address_low;               /*0014 0017*/
556         uint32_t        master_error_address_high;              /*0018 001B*/
557         uint32_t        hcb_size;                               /*001C 001F*/
558         uint32_t        inbound_doorbell;                       /*0020 0023*/
559         uint32_t        diagnostic_rw_data;                     /*0024 0027*/
560         uint32_t        diagnostic_rw_address_low;              /*0028 002B*/
561         uint32_t        diagnostic_rw_address_high;             /*002C 002F*/
562         uint32_t        host_int_status;                        /*0030 0033*/
563         uint32_t        host_int_mask;                          /*0034 0037*/
564         uint32_t        dcr_data;                               /*0038 003B*/
565         uint32_t        dcr_address;                            /*003C 003F*/
566         uint32_t        inbound_queueport;                      /*0040 0043*/
567         uint32_t        outbound_queueport;                     /*0044 0047*/
568         uint32_t        hcb_pci_address_low;                    /*0048 004B*/
569         uint32_t        hcb_pci_address_high;                   /*004C 004F*/
570         uint32_t        iop_int_status;                         /*0050 0053*/
571         uint32_t        iop_int_mask;                           /*0054 0057*/
572         uint32_t        iop_inbound_queue_port;                 /*0058 005B*/
573         uint32_t        iop_outbound_queue_port;                /*005C 005F*/
574         uint32_t        inbound_free_list_index;                /*0060 0063*/
575         uint32_t        inbound_post_list_index;                /*0064 0067*/
576         uint32_t        outbound_free_list_index;               /*0068 006B*/
577         uint32_t        outbound_post_list_index;               /*006C 006F*/
578         uint32_t        inbound_doorbell_clear;                 /*0070 0073*/
579         uint32_t        i2o_message_unit_control;               /*0074 0077*/
580         uint32_t        last_used_message_source_address_low;   /*0078 007B*/
581         uint32_t        last_used_message_source_address_high;  /*007C 007F*/
582         uint32_t        pull_mode_data_byte_count[4];           /*0080 008F*/
583         uint32_t        message_dest_address_index;             /*0090 0093*/
584         uint32_t        done_queue_not_empty_int_counter_timer; /*0094 0097*/
585         uint32_t        utility_A_int_counter_timer;            /*0098 009B*/
586         uint32_t        outbound_doorbell;                      /*009C 009F*/
587         uint32_t        outbound_doorbell_clear;                /*00A0 00A3*/
588         uint32_t        message_source_address_index;           /*00A4 00A7*/
589         uint32_t        message_done_queue_index;               /*00A8 00AB*/
590         uint32_t        reserved0;                              /*00AC 00AF*/
591         uint32_t        inbound_msgaddr0;                       /*00B0 00B3*/
592         uint32_t        inbound_msgaddr1;                       /*00B4 00B7*/
593         uint32_t        outbound_msgaddr0;                      /*00B8 00BB*/
594         uint32_t        outbound_msgaddr1;                      /*00BC 00BF*/
595         uint32_t        inbound_queueport_low;                  /*00C0 00C3*/
596         uint32_t        inbound_queueport_high;                 /*00C4 00C7*/
597         uint32_t        outbound_queueport_low;                 /*00C8 00CB*/
598         uint32_t        outbound_queueport_high;                /*00CC 00CF*/
599         uint32_t        iop_inbound_queue_port_low;             /*00D0 00D3*/
600         uint32_t        iop_inbound_queue_port_high;            /*00D4 00D7*/
601         uint32_t        iop_outbound_queue_port_low;            /*00D8 00DB*/
602         uint32_t        iop_outbound_queue_port_high;           /*00DC 00DF*/
603         uint32_t        message_dest_queue_port_low;            /*00E0 00E3*/
604         uint32_t        message_dest_queue_port_high;           /*00E4 00E7*/
605         uint32_t        last_used_message_dest_address_low;     /*00E8 00EB*/
606         uint32_t        last_used_message_dest_address_high;    /*00EC 00EF*/
607         uint32_t        message_done_queue_base_address_low;    /*00F0 00F3*/
608         uint32_t        message_done_queue_base_address_high;   /*00F4 00F7*/
609         uint32_t        host_diagnostic;                        /*00F8 00FB*/
610         uint32_t        write_sequence;                         /*00FC 00FF*/
611         uint32_t        reserved1[34];                          /*0100 0187*/
612         uint32_t        reserved2[1950];                        /*0188 1FFF*/
613         uint32_t        message_wbuffer[32];                    /*2000 207F*/
614         uint32_t        reserved3[32];                          /*2080 20FF*/
615         uint32_t        message_rbuffer[32];                    /*2100 217F*/
616         uint32_t        reserved4[32];                          /*2180 21FF*/
617         uint32_t        msgcode_rwbuffer[256];                  /*2200 23FF*/
618 };
619 /*
620 *********************************************************************
621 **     Messaging Unit (MU) of Type D processor
622 *********************************************************************
623 */
624 struct InBound_SRB {
625         uint32_t addressLow; /* pointer to SRB block */
626         uint32_t addressHigh;
627         uint32_t length; /* in DWORDs */
628         uint32_t reserved0;
629 };
630
631 struct OutBound_SRB {
632         uint32_t addressLow; /* pointer to SRB block */
633         uint32_t addressHigh;
634 };
635
636 struct MessageUnit_D {
637         struct InBound_SRB      post_qbuffer[ARCMSR_MAX_ARC1214_POSTQUEUE];
638         volatile struct OutBound_SRB
639                                 done_qbuffer[ARCMSR_MAX_ARC1214_DONEQUEUE];
640         u16 postq_index;
641         volatile u16 doneq_index;
642         u32 __iomem *chip_id;                   /* 0x00004 */
643         u32 __iomem *cpu_mem_config;            /* 0x00008 */
644         u32 __iomem *i2o_host_interrupt_mask;   /* 0x00034 */
645         u32 __iomem *sample_at_reset;           /* 0x00100 */
646         u32 __iomem *reset_request;             /* 0x00108 */
647         u32 __iomem *host_int_status;           /* 0x00200 */
648         u32 __iomem *pcief0_int_enable;         /* 0x0020C */
649         u32 __iomem *inbound_msgaddr0;          /* 0x00400 */
650         u32 __iomem *inbound_msgaddr1;          /* 0x00404 */
651         u32 __iomem *outbound_msgaddr0;         /* 0x00420 */
652         u32 __iomem *outbound_msgaddr1;         /* 0x00424 */
653         u32 __iomem *inbound_doorbell;          /* 0x00460 */
654         u32 __iomem *outbound_doorbell;         /* 0x00480 */
655         u32 __iomem *outbound_doorbell_enable;  /* 0x00484 */
656         u32 __iomem *inboundlist_base_low;      /* 0x01000 */
657         u32 __iomem *inboundlist_base_high;     /* 0x01004 */
658         u32 __iomem *inboundlist_write_pointer; /* 0x01018 */
659         u32 __iomem *outboundlist_base_low;     /* 0x01060 */
660         u32 __iomem *outboundlist_base_high;    /* 0x01064 */
661         u32 __iomem *outboundlist_copy_pointer; /* 0x0106C */
662         u32 __iomem *outboundlist_read_pointer; /* 0x01070 0x01072 */
663         u32 __iomem *outboundlist_interrupt_cause;      /* 0x1088 */
664         u32 __iomem *outboundlist_interrupt_enable;     /* 0x108C */
665         u32 __iomem *message_wbuffer;           /* 0x2000 */
666         u32 __iomem *message_rbuffer;           /* 0x2100 */
667         u32 __iomem *msgcode_rwbuffer;          /* 0x2200 */
668 };
669 /*
670 *********************************************************************
671 **     Messaging Unit (MU) of Type E processor(LSI)
672 *********************************************************************
673 */
674 struct MessageUnit_E{
675         uint32_t        iobound_doorbell;                       /*0000 0003*/
676         uint32_t        write_sequence_3xxx;                    /*0004 0007*/
677         uint32_t        host_diagnostic_3xxx;                   /*0008 000B*/
678         uint32_t        posted_outbound_doorbell;               /*000C 000F*/
679         uint32_t        master_error_attribute;                 /*0010 0013*/
680         uint32_t        master_error_address_low;               /*0014 0017*/
681         uint32_t        master_error_address_high;              /*0018 001B*/
682         uint32_t        hcb_size;                               /*001C 001F*/
683         uint32_t        inbound_doorbell;                       /*0020 0023*/
684         uint32_t        diagnostic_rw_data;                     /*0024 0027*/
685         uint32_t        diagnostic_rw_address_low;              /*0028 002B*/
686         uint32_t        diagnostic_rw_address_high;             /*002C 002F*/
687         uint32_t        host_int_status;                        /*0030 0033*/
688         uint32_t        host_int_mask;                          /*0034 0037*/
689         uint32_t        dcr_data;                               /*0038 003B*/
690         uint32_t        dcr_address;                            /*003C 003F*/
691         uint32_t        inbound_queueport;                      /*0040 0043*/
692         uint32_t        outbound_queueport;                     /*0044 0047*/
693         uint32_t        hcb_pci_address_low;                    /*0048 004B*/
694         uint32_t        hcb_pci_address_high;                   /*004C 004F*/
695         uint32_t        iop_int_status;                         /*0050 0053*/
696         uint32_t        iop_int_mask;                           /*0054 0057*/
697         uint32_t        iop_inbound_queue_port;                 /*0058 005B*/
698         uint32_t        iop_outbound_queue_port;                /*005C 005F*/
699         uint32_t        inbound_free_list_index;                /*0060 0063*/
700         uint32_t        inbound_post_list_index;                /*0064 0067*/
701         uint32_t        reply_post_producer_index;              /*0068 006B*/
702         uint32_t        reply_post_consumer_index;              /*006C 006F*/
703         uint32_t        inbound_doorbell_clear;                 /*0070 0073*/
704         uint32_t        i2o_message_unit_control;               /*0074 0077*/
705         uint32_t        last_used_message_source_address_low;   /*0078 007B*/
706         uint32_t        last_used_message_source_address_high;  /*007C 007F*/
707         uint32_t        pull_mode_data_byte_count[4];           /*0080 008F*/
708         uint32_t        message_dest_address_index;             /*0090 0093*/
709         uint32_t        done_queue_not_empty_int_counter_timer; /*0094 0097*/
710         uint32_t        utility_A_int_counter_timer;            /*0098 009B*/
711         uint32_t        outbound_doorbell;                      /*009C 009F*/
712         uint32_t        outbound_doorbell_clear;                /*00A0 00A3*/
713         uint32_t        message_source_address_index;           /*00A4 00A7*/
714         uint32_t        message_done_queue_index;               /*00A8 00AB*/
715         uint32_t        reserved0;                              /*00AC 00AF*/
716         uint32_t        inbound_msgaddr0;                       /*00B0 00B3*/
717         uint32_t        inbound_msgaddr1;                       /*00B4 00B7*/
718         uint32_t        outbound_msgaddr0;                      /*00B8 00BB*/
719         uint32_t        outbound_msgaddr1;                      /*00BC 00BF*/
720         uint32_t        inbound_queueport_low;                  /*00C0 00C3*/
721         uint32_t        inbound_queueport_high;                 /*00C4 00C7*/
722         uint32_t        outbound_queueport_low;                 /*00C8 00CB*/
723         uint32_t        outbound_queueport_high;                /*00CC 00CF*/
724         uint32_t        iop_inbound_queue_port_low;             /*00D0 00D3*/
725         uint32_t        iop_inbound_queue_port_high;            /*00D4 00D7*/
726         uint32_t        iop_outbound_queue_port_low;            /*00D8 00DB*/
727         uint32_t        iop_outbound_queue_port_high;           /*00DC 00DF*/
728         uint32_t        message_dest_queue_port_low;            /*00E0 00E3*/
729         uint32_t        message_dest_queue_port_high;           /*00E4 00E7*/
730         uint32_t        last_used_message_dest_address_low;     /*00E8 00EB*/
731         uint32_t        last_used_message_dest_address_high;    /*00EC 00EF*/
732         uint32_t        message_done_queue_base_address_low;    /*00F0 00F3*/
733         uint32_t        message_done_queue_base_address_high;   /*00F4 00F7*/
734         uint32_t        host_diagnostic;                        /*00F8 00FB*/
735         uint32_t        write_sequence;                         /*00FC 00FF*/
736         uint32_t        reserved1[34];                          /*0100 0187*/
737         uint32_t        reserved2[1950];                        /*0188 1FFF*/
738         uint32_t        message_wbuffer[32];                    /*2000 207F*/
739         uint32_t        reserved3[32];                          /*2080 20FF*/
740         uint32_t        message_rbuffer[32];                    /*2100 217F*/
741         uint32_t        reserved4[32];                          /*2180 21FF*/
742         uint32_t        msgcode_rwbuffer[256];                  /*2200 23FF*/
743 };
744
745 /*
746 *********************************************************************
747 **     Messaging Unit (MU) of Type F processor(LSI)
748 *********************************************************************
749 */
750 struct MessageUnit_F {
751         uint32_t        iobound_doorbell;                       /*0000 0003*/
752         uint32_t        write_sequence_3xxx;                    /*0004 0007*/
753         uint32_t        host_diagnostic_3xxx;                   /*0008 000B*/
754         uint32_t        posted_outbound_doorbell;               /*000C 000F*/
755         uint32_t        master_error_attribute;                 /*0010 0013*/
756         uint32_t        master_error_address_low;               /*0014 0017*/
757         uint32_t        master_error_address_high;              /*0018 001B*/
758         uint32_t        hcb_size;                               /*001C 001F*/
759         uint32_t        inbound_doorbell;                       /*0020 0023*/
760         uint32_t        diagnostic_rw_data;                     /*0024 0027*/
761         uint32_t        diagnostic_rw_address_low;              /*0028 002B*/
762         uint32_t        diagnostic_rw_address_high;             /*002C 002F*/
763         uint32_t        host_int_status;                        /*0030 0033*/
764         uint32_t        host_int_mask;                          /*0034 0037*/
765         uint32_t        dcr_data;                               /*0038 003B*/
766         uint32_t        dcr_address;                            /*003C 003F*/
767         uint32_t        inbound_queueport;                      /*0040 0043*/
768         uint32_t        outbound_queueport;                     /*0044 0047*/
769         uint32_t        hcb_pci_address_low;                    /*0048 004B*/
770         uint32_t        hcb_pci_address_high;                   /*004C 004F*/
771         uint32_t        iop_int_status;                         /*0050 0053*/
772         uint32_t        iop_int_mask;                           /*0054 0057*/
773         uint32_t        iop_inbound_queue_port;                 /*0058 005B*/
774         uint32_t        iop_outbound_queue_port;                /*005C 005F*/
775         uint32_t        inbound_free_list_index;                /*0060 0063*/
776         uint32_t        inbound_post_list_index;                /*0064 0067*/
777         uint32_t        reply_post_producer_index;              /*0068 006B*/
778         uint32_t        reply_post_consumer_index;              /*006C 006F*/
779         uint32_t        inbound_doorbell_clear;                 /*0070 0073*/
780         uint32_t        i2o_message_unit_control;               /*0074 0077*/
781         uint32_t        last_used_message_source_address_low;   /*0078 007B*/
782         uint32_t        last_used_message_source_address_high;  /*007C 007F*/
783         uint32_t        pull_mode_data_byte_count[4];           /*0080 008F*/
784         uint32_t        message_dest_address_index;             /*0090 0093*/
785         uint32_t        done_queue_not_empty_int_counter_timer; /*0094 0097*/
786         uint32_t        utility_A_int_counter_timer;            /*0098 009B*/
787         uint32_t        outbound_doorbell;                      /*009C 009F*/
788         uint32_t        outbound_doorbell_clear;                /*00A0 00A3*/
789         uint32_t        message_source_address_index;           /*00A4 00A7*/
790         uint32_t        message_done_queue_index;               /*00A8 00AB*/
791         uint32_t        reserved0;                              /*00AC 00AF*/
792         uint32_t        inbound_msgaddr0;                       /*00B0 00B3*/
793         uint32_t        inbound_msgaddr1;                       /*00B4 00B7*/
794         uint32_t        outbound_msgaddr0;                      /*00B8 00BB*/
795         uint32_t        outbound_msgaddr1;                      /*00BC 00BF*/
796         uint32_t        inbound_queueport_low;                  /*00C0 00C3*/
797         uint32_t        inbound_queueport_high;                 /*00C4 00C7*/
798         uint32_t        outbound_queueport_low;                 /*00C8 00CB*/
799         uint32_t        outbound_queueport_high;                /*00CC 00CF*/
800         uint32_t        iop_inbound_queue_port_low;             /*00D0 00D3*/
801         uint32_t        iop_inbound_queue_port_high;            /*00D4 00D7*/
802         uint32_t        iop_outbound_queue_port_low;            /*00D8 00DB*/
803         uint32_t        iop_outbound_queue_port_high;           /*00DC 00DF*/
804         uint32_t        message_dest_queue_port_low;            /*00E0 00E3*/
805         uint32_t        message_dest_queue_port_high;           /*00E4 00E7*/
806         uint32_t        last_used_message_dest_address_low;     /*00E8 00EB*/
807         uint32_t        last_used_message_dest_address_high;    /*00EC 00EF*/
808         uint32_t        message_done_queue_base_address_low;    /*00F0 00F3*/
809         uint32_t        message_done_queue_base_address_high;   /*00F4 00F7*/
810         uint32_t        host_diagnostic;                        /*00F8 00FB*/
811         uint32_t        write_sequence;                         /*00FC 00FF*/
812         uint32_t        reserved1[46];                          /*0100 01B7*/
813         uint32_t        reply_post_producer_index1;             /*01B8 01BB*/
814         uint32_t        reply_post_consumer_index1;             /*01BC 01BF*/
815 };
816
817 #define MESG_RW_BUFFER_SIZE     (256 * 3)
818
819 typedef struct deliver_completeQ {
820         uint16_t        cmdFlag;
821         uint16_t        cmdSMID;
822         uint16_t        cmdLMID;        // reserved (0)
823         uint16_t        cmdFlag2;       // reserved (0)
824 } DeliverQ, CompletionQ, *pDeliver_Q, *pCompletion_Q;
825 /*
826 *******************************************************************************
827 **                 Adapter Control Block
828 *******************************************************************************
829 */
830 struct AdapterControlBlock
831 {
832         uint32_t                adapter_type;           /* adapter A,B..... */
833 #define ACB_ADAPTER_TYPE_A              0x00000000      /* hba I IOP */
834 #define ACB_ADAPTER_TYPE_B              0x00000001      /* hbb M IOP */
835 #define ACB_ADAPTER_TYPE_C              0x00000002      /* hbc L IOP */
836 #define ACB_ADAPTER_TYPE_D              0x00000003      /* hbd M IOP */
837 #define ACB_ADAPTER_TYPE_E              0x00000004      /* hba L IOP */
838 #define ACB_ADAPTER_TYPE_F              0x00000005      /* hba L IOP */
839         u32                     ioqueue_size;
840         struct pci_dev *        pdev;
841         struct Scsi_Host *      host;
842         unsigned long           vir2phy_offset;
843         /* Offset is used in making arc cdb physical to virtual calculations */
844         uint32_t                outbound_int_enable;
845         uint32_t                cdb_phyaddr_hi32;
846         uint32_t                reg_mu_acc_handle0;
847         uint64_t                cdb_phyadd_hipart;
848         spinlock_t              eh_lock;
849         spinlock_t              ccblist_lock;
850         spinlock_t              postq_lock;
851         spinlock_t              doneq_lock;
852         spinlock_t              rqbuffer_lock;
853         spinlock_t              wqbuffer_lock;
854         union {
855                 struct MessageUnit_A __iomem *pmuA;
856                 struct MessageUnit_B    *pmuB;
857                 struct MessageUnit_C __iomem *pmuC;
858                 struct MessageUnit_D    *pmuD;
859                 struct MessageUnit_E __iomem *pmuE;
860                 struct MessageUnit_F __iomem *pmuF;
861         };
862         /* message unit ATU inbound base address0 */
863         void __iomem            *mem_base0;
864         void __iomem            *mem_base1;
865         //0x000 - COMPORT_IN  (Host sent to ROC)
866         uint32_t                *message_wbuffer;
867         //0x100 - COMPORT_OUT (ROC sent to Host)
868         uint32_t                *message_rbuffer;
869         uint32_t                *msgcode_rwbuffer;      //0x200 - BIOS_AREA
870         uint32_t                acb_flags;
871         u16                     dev_id;
872         uint8_t                 adapter_index;
873 #define ACB_F_SCSISTOPADAPTER           0x0001
874 #define ACB_F_MSG_STOP_BGRB             0x0002
875 /* stop RAID background rebuild */
876 #define ACB_F_MSG_START_BGRB            0x0004
877 /* stop RAID background rebuild */
878 #define ACB_F_IOPDATA_OVERFLOW          0x0008
879 /* iop message data rqbuffer overflow */
880 #define ACB_F_MESSAGE_WQBUFFER_CLEARED  0x0010
881 /* message clear wqbuffer */
882 #define ACB_F_MESSAGE_RQBUFFER_CLEARED  0x0020
883 /* message clear rqbuffer */
884 #define ACB_F_MESSAGE_WQBUFFER_READED   0x0040
885 #define ACB_F_BUS_RESET                 0x0080
886
887 #define ACB_F_IOP_INITED                0x0100
888 /* iop init */
889 #define ACB_F_ABORT                     0x0200
890 #define ACB_F_FIRMWARE_TRAP             0x0400
891 #define ACB_F_ADAPTER_REMOVED           0x0800
892 #define ACB_F_MSG_GET_CONFIG            0x1000
893         struct CommandControlBlock *    pccb_pool[ARCMSR_MAX_FREECCB_NUM];
894         /* used for memory free */
895         struct list_head        ccb_free_list;
896         /* head of free ccb list */
897
898         atomic_t                ccboutstandingcount;
899         /*The present outstanding command number that in the IOP that
900                                         waiting for being handled by FW*/
901
902         void *                  dma_coherent;
903         /* dma_coherent used for memory free */
904         dma_addr_t              dma_coherent_handle;
905         /* dma_coherent_handle used for memory free */
906         dma_addr_t              dma_coherent_handle2;
907         void                    *dma_coherent2;
908         unsigned int            uncache_size;
909         uint8_t                 rqbuffer[ARCMSR_MAX_QBUFFER];
910         /* data collection buffer for read from 80331 */
911         int32_t                 rqbuf_getIndex;
912         /* first of read buffer  */
913         int32_t                 rqbuf_putIndex;
914         /* last of read buffer   */
915         uint8_t                 wqbuffer[ARCMSR_MAX_QBUFFER];
916         /* data collection buffer for write to 80331  */
917         int32_t                 wqbuf_getIndex;
918         /* first of write buffer */
919         int32_t                 wqbuf_putIndex;
920         /* last of write buffer  */
921         uint8_t                 devstate[ARCMSR_MAX_TARGETID][ARCMSR_MAX_TARGETLUN];
922         /* id0 ..... id15, lun0...lun7 */
923 #define ARECA_RAID_GONE                 0x55
924 #define ARECA_RAID_GOOD                 0xaa
925         uint32_t                num_resets;
926         uint32_t                num_aborts;
927         uint32_t                signature;
928         uint32_t                firm_request_len;
929         uint32_t                firm_numbers_queue;
930         uint32_t                firm_sdram_size;
931         uint32_t                firm_hd_channels;
932         uint32_t                firm_cfg_version;
933         char                    firm_model[12];
934         char                    firm_version[20];
935         char                    device_map[20];                 /*21,84-99*/
936         struct work_struct      arcmsr_do_message_isr_bh;
937         struct timer_list       eternal_timer;
938         unsigned short          fw_flag;
939 #define FW_NORMAL                       0x0000
940 #define FW_BOG                          0x0001
941 #define FW_DEADLOCK                     0x0010
942         uint32_t                maxOutstanding;
943         int                     vector_count;
944         uint32_t                maxFreeCCB;
945         struct timer_list       refresh_timer;
946         uint32_t                doneq_index;
947         uint32_t                ccbsize;
948         uint32_t                in_doorbell;
949         uint32_t                out_doorbell;
950         uint32_t                completionQ_entry;
951         pCompletion_Q           pCompletionQ;
952         uint32_t                completeQ_size;
953 };/* HW_DEVICE_EXTENSION */
954 /*
955 *******************************************************************************
956 **                   Command Control Block
957 **             this CCB length must be 32 bytes boundary
958 *******************************************************************************
959 */
960 struct CommandControlBlock{
961         /*x32:sizeof struct_CCB=(64+60)byte, x64:sizeof struct_CCB=(64+60)byte*/
962         struct list_head                list;           /*x32: 8byte, x64: 16byte*/
963         struct scsi_cmnd                *pcmd;          /*8 bytes pointer of linux scsi command */
964         struct AdapterControlBlock      *acb;           /*x32: 4byte, x64: 8byte*/
965         unsigned long                   cdb_phyaddr;    /*x32: 4byte, x64: 8byte*/
966         uint32_t                        arc_cdb_size;   /*x32:4byte,x64:4byte*/
967         uint16_t                        ccb_flags;      /*x32: 2byte, x64: 2byte*/
968 #define CCB_FLAG_READ           0x0000
969 #define CCB_FLAG_WRITE          0x0001
970 #define CCB_FLAG_ERROR          0x0002
971 #define CCB_FLAG_FLUSHCACHE     0x0004
972 #define CCB_FLAG_MASTER_ABORTED 0x0008
973         uint16_t                        startdone;      /*x32:2byte,x32:2byte*/
974 #define ARCMSR_CCB_DONE         0x0000
975 #define ARCMSR_CCB_START        0x55AA
976 #define ARCMSR_CCB_ABORTED      0xAA55
977 #define ARCMSR_CCB_ILLEGAL      0xFFFF
978         uint32_t                        smid;
979 #if BITS_PER_LONG == 64
980         /*  ======================512+64 bytes========================  */
981                 uint32_t                reserved[3];    /*12 byte*/
982 #else
983         /*  ======================512+32 bytes========================  */
984                 uint32_t                reserved[8];    /*32  byte*/
985 #endif
986         /*  =======================================================   */
987         struct ARCMSR_CDB               arcmsr_cdb;
988 };
989 /*
990 *******************************************************************************
991 **    ARECA SCSI sense data
992 *******************************************************************************
993 */
994 struct SENSE_DATA
995 {
996         uint8_t                         ErrorCode:7;
997 #define SCSI_SENSE_CURRENT_ERRORS       0x70
998 #define SCSI_SENSE_DEFERRED_ERRORS      0x71
999         uint8_t                         Valid:1;
1000         uint8_t                         SegmentNumber;
1001         uint8_t                         SenseKey:4;
1002         uint8_t                         Reserved:1;
1003         uint8_t                         IncorrectLength:1;
1004         uint8_t                         EndOfMedia:1;
1005         uint8_t                         FileMark:1;
1006         uint8_t                         Information[4];
1007         uint8_t                         AdditionalSenseLength;
1008         uint8_t                         CommandSpecificInformation[4];
1009         uint8_t                         AdditionalSenseCode;
1010         uint8_t                         AdditionalSenseCodeQualifier;
1011         uint8_t                         FieldReplaceableUnitCode;
1012         uint8_t                         SenseKeySpecific[3];
1013 };
1014 /*
1015 *******************************************************************************
1016 **  Outbound Interrupt Status Register - OISR
1017 *******************************************************************************
1018 */
1019 #define ARCMSR_MU_OUTBOUND_INTERRUPT_STATUS_REG 0x30
1020 #define ARCMSR_MU_OUTBOUND_PCI_INT              0x10
1021 #define ARCMSR_MU_OUTBOUND_POSTQUEUE_INT        0x08
1022 #define ARCMSR_MU_OUTBOUND_DOORBELL_INT         0x04
1023 #define ARCMSR_MU_OUTBOUND_MESSAGE1_INT         0x02
1024 #define ARCMSR_MU_OUTBOUND_MESSAGE0_INT         0x01
1025 #define ARCMSR_MU_OUTBOUND_HANDLE_INT                     \
1026                     (ARCMSR_MU_OUTBOUND_MESSAGE0_INT      \
1027                      |ARCMSR_MU_OUTBOUND_MESSAGE1_INT     \
1028                      |ARCMSR_MU_OUTBOUND_DOORBELL_INT     \
1029                      |ARCMSR_MU_OUTBOUND_POSTQUEUE_INT    \
1030                      |ARCMSR_MU_OUTBOUND_PCI_INT)
1031 /*
1032 *******************************************************************************
1033 **  Outbound Interrupt Mask Register - OIMR
1034 *******************************************************************************
1035 */
1036 #define ARCMSR_MU_OUTBOUND_INTERRUPT_MASK_REG           0x34
1037 #define ARCMSR_MU_OUTBOUND_PCI_INTMASKENABLE            0x10
1038 #define ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE      0x08
1039 #define ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE       0x04
1040 #define ARCMSR_MU_OUTBOUND_MESSAGE1_INTMASKENABLE       0x02
1041 #define ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE       0x01
1042 #define ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE            0x1F
1043
1044 extern void arcmsr_write_ioctldata2iop(struct AdapterControlBlock *);
1045 extern uint32_t arcmsr_Read_iop_rqbuffer_data(struct AdapterControlBlock *,
1046         struct QBUFFER __iomem *);
1047 extern void arcmsr_clear_iop2drv_rqueue_buffer(struct AdapterControlBlock *);
1048 extern struct QBUFFER __iomem *arcmsr_get_iop_rqbuffer(struct AdapterControlBlock *);
1049 extern const struct attribute_group *arcmsr_host_groups[];
1050 extern int arcmsr_alloc_sysfs_attr(struct AdapterControlBlock *);
1051 void arcmsr_free_sysfs_attr(struct AdapterControlBlock *acb);