1 // SPDX-License-Identifier: GPL-2.0-only
3 * Aic94xx SAS/SATA driver sequencer interface.
5 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
6 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
8 * Parts of this code adapted from David Chaw's adp94xx_seq.c.
11 #include <linux/delay.h>
12 #include <linux/gfp.h>
13 #include <linux/pci.h>
14 #include <linux/module.h>
15 #include <linux/firmware.h>
16 #include "aic94xx_reg.h"
17 #include "aic94xx_hwi.h"
19 #include "aic94xx_seq.h"
20 #include "aic94xx_dump.h"
22 /* It takes no more than 0.05 us for an instruction
23 * to complete. So waiting for 1 us should be more than
27 #define PAUSE_TRIES 1000
29 static const struct firmware *sequencer_fw;
30 static u16 cseq_vecs[CSEQ_NUM_VECS], lseq_vecs[LSEQ_NUM_VECS], mode2_task,
31 cseq_idle_loop, lseq_idle_loop;
32 static const u8 *cseq_code, *lseq_code;
33 static u32 cseq_code_size, lseq_code_size;
35 static u16 first_scb_site_no = 0xFFFF;
36 static u16 last_scb_site_no;
38 /* ---------- Pause/Unpause CSEQ/LSEQ ---------- */
41 * asd_pause_cseq - pause the central sequencer
42 * @asd_ha: pointer to host adapter structure
44 * Return 0 on success, negative on failure.
46 static int asd_pause_cseq(struct asd_ha_struct *asd_ha)
48 int count = PAUSE_TRIES;
51 arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
55 asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl | EPAUSE);
57 arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
61 } while (--count > 0);
63 ASD_DPRINTK("couldn't pause CSEQ\n");
68 * asd_unpause_cseq - unpause the central sequencer.
69 * @asd_ha: pointer to host adapter structure.
71 * Return 0 on success, negative on error.
73 static int asd_unpause_cseq(struct asd_ha_struct *asd_ha)
76 int count = PAUSE_TRIES;
78 arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
79 if (!(arp2ctl & PAUSED))
82 asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl & ~EPAUSE);
84 arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
85 if (!(arp2ctl & PAUSED))
88 } while (--count > 0);
90 ASD_DPRINTK("couldn't unpause the CSEQ\n");
95 * asd_seq_pause_lseq - pause a link sequencer
96 * @asd_ha: pointer to a host adapter structure
97 * @lseq: link sequencer of interest
99 * Return 0 on success, negative on error.
101 static int asd_seq_pause_lseq(struct asd_ha_struct *asd_ha, int lseq)
104 int count = PAUSE_TRIES;
106 arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
107 if (arp2ctl & PAUSED)
110 asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl | EPAUSE);
112 arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
113 if (arp2ctl & PAUSED)
116 } while (--count > 0);
118 ASD_DPRINTK("couldn't pause LSEQ %d\n", lseq);
123 * asd_pause_lseq - pause the link sequencer(s)
124 * @asd_ha: pointer to host adapter structure
125 * @lseq_mask: mask of link sequencers of interest
127 * Return 0 on success, negative on failure.
129 static int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask)
134 for_each_sequencer(lseq_mask, lseq_mask, lseq) {
135 err = asd_seq_pause_lseq(asd_ha, lseq);
144 * asd_seq_unpause_lseq - unpause a link sequencer
145 * @asd_ha: pointer to host adapter structure
146 * @lseq: link sequencer of interest
148 * Return 0 on success, negative on error.
150 static int asd_seq_unpause_lseq(struct asd_ha_struct *asd_ha, int lseq)
153 int count = PAUSE_TRIES;
155 arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
156 if (!(arp2ctl & PAUSED))
159 asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl & ~EPAUSE);
161 arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
162 if (!(arp2ctl & PAUSED))
165 } while (--count > 0);
167 ASD_DPRINTK("couldn't unpause LSEQ %d\n", lseq);
172 /* ---------- Downloading CSEQ/LSEQ microcode ---------- */
174 static int asd_verify_cseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
177 u32 addr = CSEQ_RAM_REG_BASE_ADR;
178 const u32 *prog = (u32 *) _prog;
181 for (i = 0; i < size; i += 4, prog++, addr += 4) {
182 u32 val = asd_read_reg_dword(asd_ha, addr);
184 if (le32_to_cpu(*prog) != val) {
185 asd_printk("%s: cseq verify failed at %u "
186 "read:0x%x, wanted:0x%x\n",
187 pci_name(asd_ha->pcidev),
188 i, val, le32_to_cpu(*prog));
192 ASD_DPRINTK("verified %d bytes, passed\n", size);
197 * asd_verify_lseq - verify the microcode of a link sequencer
198 * @asd_ha: pointer to host adapter structure
199 * @_prog: pointer to the microcode
200 * @size: size of the microcode in bytes
201 * @lseq: link sequencer of interest
203 * The link sequencer code is accessed in 4 KB pages, which are selected
204 * by setting LmRAMPAGE (bits 8 and 9) of the LmBISTCTL1 register.
205 * The 10 KB LSEQm instruction code is mapped, page at a time, at
208 static int asd_verify_lseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
211 #define LSEQ_CODEPAGE_SIZE 4096
212 int pages = (size + LSEQ_CODEPAGE_SIZE - 1) / LSEQ_CODEPAGE_SIZE;
214 const u32 *prog = (u32 *) _prog;
216 for (page = 0; page < pages; page++) {
219 asd_write_reg_dword(asd_ha, LmBISTCTL1(lseq),
220 page << LmRAMPAGE_LSHIFT);
221 for (i = 0; size > 0 && i < LSEQ_CODEPAGE_SIZE;
222 i += 4, prog++, size-=4) {
224 u32 val = asd_read_reg_dword(asd_ha, LmSEQRAM(lseq)+i);
226 if (le32_to_cpu(*prog) != val) {
227 asd_printk("%s: LSEQ%d verify failed "
228 "page:%d, offs:%d\n",
229 pci_name(asd_ha->pcidev),
235 ASD_DPRINTK("LSEQ%d verified %d bytes, passed\n", lseq,
236 (int)((u8 *)prog-_prog));
241 * asd_verify_seq -- verify CSEQ/LSEQ microcode
242 * @asd_ha: pointer to host adapter structure
243 * @prog: pointer to microcode
244 * @size: size of the microcode
245 * @lseq_mask: if 0, verify CSEQ microcode, else mask of LSEQs of interest
247 * Return 0 if microcode is correct, negative on mismatch.
249 static int asd_verify_seq(struct asd_ha_struct *asd_ha, const u8 *prog,
250 u32 size, u8 lseq_mask)
253 return asd_verify_cseq(asd_ha, prog, size);
257 for_each_sequencer(lseq_mask, lseq_mask, lseq) {
258 err = asd_verify_lseq(asd_ha, prog, size, lseq);
266 #define ASD_DMA_MODE_DOWNLOAD
267 #ifdef ASD_DMA_MODE_DOWNLOAD
268 /* This is the size of the CSEQ Mapped instruction page */
269 #define MAX_DMA_OVLY_COUNT ((1U << 14)-1)
270 static int asd_download_seq(struct asd_ha_struct *asd_ha,
271 const u8 * const prog, u32 size, u8 lseq_mask)
276 const int pages = (size + MAX_DMA_OVLY_COUNT - 1) / MAX_DMA_OVLY_COUNT;
277 struct asd_dma_tok *token;
281 asd_printk("sequencer program not multiple of 4\n");
285 asd_pause_cseq(asd_ha);
286 asd_pause_lseq(asd_ha, 0xFF);
288 /* save, disable and clear interrupts */
289 comstaten = asd_read_reg_dword(asd_ha, COMSTATEN);
290 asd_write_reg_dword(asd_ha, COMSTATEN, 0);
291 asd_write_reg_dword(asd_ha, COMSTAT, COMSTAT_MASK);
293 asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN);
294 asd_write_reg_dword(asd_ha, CHIMINT, CHIMINT_MASK);
296 token = asd_alloc_coherent(asd_ha, MAX_DMA_OVLY_COUNT, GFP_KERNEL);
298 asd_printk("out of memory for dma SEQ download\n");
302 ASD_DPRINTK("dma-ing %d bytes\n", size);
304 for (page = 0; page < pages; page++) {
306 u32 left = min(size-page*MAX_DMA_OVLY_COUNT,
307 (u32)MAX_DMA_OVLY_COUNT);
309 memcpy(token->vaddr, prog + page*MAX_DMA_OVLY_COUNT, left);
310 asd_write_reg_addr(asd_ha, OVLYDMAADR, token->dma_handle);
311 asd_write_reg_dword(asd_ha, OVLYDMACNT, left);
312 reg = !page ? RESETOVLYDMA : 0;
313 reg |= (STARTOVLYDMA | OVLYHALTERR);
314 reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
316 asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
318 for (i = PAUSE_TRIES*100; i > 0; i--) {
319 u32 dmadone = asd_read_reg_dword(asd_ha, OVLYDMACTL);
320 if (!(dmadone & OVLYDMAACT))
326 reg = asd_read_reg_dword(asd_ha, COMSTAT);
327 if (!(reg & OVLYDMADONE) || (reg & OVLYERR)
328 || (asd_read_reg_dword(asd_ha, CHIMINT) & DEVEXCEPT_MASK)){
329 asd_printk("%s: error DMA-ing sequencer code\n",
330 pci_name(asd_ha->pcidev));
334 asd_free_coherent(asd_ha, token);
336 asd_write_reg_dword(asd_ha, COMSTATEN, comstaten);
338 return err ? : asd_verify_seq(asd_ha, prog, size, lseq_mask);
340 #else /* ASD_DMA_MODE_DOWNLOAD */
341 static int asd_download_seq(struct asd_ha_struct *asd_ha, const u8 *_prog,
342 u32 size, u8 lseq_mask)
346 const u32 *prog = (u32 *) _prog;
349 asd_printk("sequencer program not multiple of 4\n");
353 asd_pause_cseq(asd_ha);
354 asd_pause_lseq(asd_ha, 0xFF);
356 reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
359 asd_write_reg_dword(asd_ha, OVLYDMACNT, size);
360 asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
362 ASD_DPRINTK("downloading %s sequencer%s in PIO mode...\n",
363 lseq_mask ? "LSEQ" : "CSEQ", lseq_mask ? "s" : "");
365 for (i = 0; i < size; i += 4, prog++)
366 asd_write_reg_dword(asd_ha, SPIODATA, *prog);
368 reg = (reg & ~PIOCMODE) | OVLYHALTERR;
369 asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
371 return asd_verify_seq(asd_ha, _prog, size, lseq_mask);
373 #endif /* ASD_DMA_MODE_DOWNLOAD */
376 * asd_seq_download_seqs - download the sequencer microcode
377 * @asd_ha: pointer to host adapter structure
379 * Download the central and link sequencer microcode.
381 static int asd_seq_download_seqs(struct asd_ha_struct *asd_ha)
385 if (!asd_ha->hw_prof.enabled_phys) {
386 asd_printk("%s: no enabled phys!\n", pci_name(asd_ha->pcidev));
390 /* Download the CSEQ */
391 ASD_DPRINTK("downloading CSEQ...\n");
392 err = asd_download_seq(asd_ha, cseq_code, cseq_code_size, 0);
394 asd_printk("CSEQ download failed:%d\n", err);
398 /* Download the Link Sequencers code. All of the Link Sequencers
399 * microcode can be downloaded at the same time.
401 ASD_DPRINTK("downloading LSEQs...\n");
402 err = asd_download_seq(asd_ha, lseq_code, lseq_code_size,
403 asd_ha->hw_prof.enabled_phys);
405 /* Try it one at a time */
407 u8 lseq_mask = asd_ha->hw_prof.enabled_phys;
409 for_each_sequencer(lseq_mask, lseq_mask, lseq) {
410 err = asd_download_seq(asd_ha, lseq_code,
411 lseq_code_size, 1<<lseq);
417 asd_printk("LSEQs download failed:%d\n", err);
422 /* ---------- Initializing the chip, chip memory, etc. ---------- */
425 * asd_init_cseq_mip - initialize CSEQ mode independent pages 4-7
426 * @asd_ha: pointer to host adapter structure
428 static void asd_init_cseq_mip(struct asd_ha_struct *asd_ha)
430 /* CSEQ Mode Independent, page 4 setup. */
431 asd_write_reg_word(asd_ha, CSEQ_Q_EXE_HEAD, 0xFFFF);
432 asd_write_reg_word(asd_ha, CSEQ_Q_EXE_TAIL, 0xFFFF);
433 asd_write_reg_word(asd_ha, CSEQ_Q_DONE_HEAD, 0xFFFF);
434 asd_write_reg_word(asd_ha, CSEQ_Q_DONE_TAIL, 0xFFFF);
435 asd_write_reg_word(asd_ha, CSEQ_Q_SEND_HEAD, 0xFFFF);
436 asd_write_reg_word(asd_ha, CSEQ_Q_SEND_TAIL, 0xFFFF);
437 asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_HEAD, 0xFFFF);
438 asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_TAIL, 0xFFFF);
439 asd_write_reg_word(asd_ha, CSEQ_Q_COPY_HEAD, 0xFFFF);
440 asd_write_reg_word(asd_ha, CSEQ_Q_COPY_TAIL, 0xFFFF);
441 asd_write_reg_word(asd_ha, CSEQ_REG0, 0);
442 asd_write_reg_word(asd_ha, CSEQ_REG1, 0);
443 asd_write_reg_dword(asd_ha, CSEQ_REG2, 0);
444 asd_write_reg_byte(asd_ha, CSEQ_LINK_CTL_Q_MAP, 0);
446 u8 con = asd_read_reg_byte(asd_ha, CCONEXIST);
447 u8 val = hweight8(con);
448 asd_write_reg_byte(asd_ha, CSEQ_MAX_CSEQ_MODE, (val<<4)|val);
450 asd_write_reg_word(asd_ha, CSEQ_FREE_LIST_HACK_COUNT, 0);
452 /* CSEQ Mode independent, page 5 setup. */
453 asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE, 0);
454 asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE+4, 0);
455 asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT, 0);
456 asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT+4, 0);
457 asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_HEAD, 0xFFFF);
458 asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_TAIL, 0xFFFF);
459 asd_write_reg_word(asd_ha, CSEQ_NEED_EST_NEXUS_SCB, 0);
460 asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_HEAD, 0);
461 asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_TAIL, 0);
462 asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_SCB_OFFSET, 0);
464 /* CSEQ Mode independent, page 6 setup. */
465 asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR0, 0);
466 asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR1, 0);
467 asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_SCBPTR, 0);
468 asd_write_reg_byte(asd_ha, CSEQ_INT_ROUT_MODE, 0);
469 asd_write_reg_byte(asd_ha, CSEQ_ISR_SCRATCH_FLAGS, 0);
470 asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_SINDEX, 0);
471 asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_DINDEX, 0);
472 asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_HEAD, 0xFFFF);
473 asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_TAIL, 0xFFFF);
474 /* Calculate the free scb mask. */
476 u16 cmdctx = asd_get_cmdctx_size(asd_ha);
477 cmdctx = (~((cmdctx/128)-1)) >> 8;
478 asd_write_reg_byte(asd_ha, CSEQ_FREE_SCB_MASK, (u8)cmdctx);
480 asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_HEAD,
482 asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_TAIL,
484 asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_HEAD, 0xFFFF);
485 asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_TAIL, 0xFFFF);
487 /* CSEQ Mode independent, page 7 setup. */
488 asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE, 0);
489 asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE+4, 0);
490 asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT, 0);
491 asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT+4, 0);
492 asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_HEAD, 0xFFFF);
493 asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_TAIL, 0xFFFF);
494 asd_write_reg_word(asd_ha, CSEQ_NEED_EMPTY_SCB, 0);
495 asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_HEAD, 0);
496 asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_TAIL, 0);
497 asd_write_reg_byte(asd_ha, CSEQ_EMPTY_SCB_OFFSET, 0);
498 asd_write_reg_word(asd_ha, CSEQ_PRIMITIVE_DATA, 0);
499 asd_write_reg_dword(asd_ha, CSEQ_TIMEOUT_CONST, 0);
503 * asd_init_cseq_mdp - initialize CSEQ Mode dependent pages
504 * @asd_ha: pointer to host adapter structure
506 static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha)
511 moffs = CSEQ_PAGE_SIZE * 2;
513 /* CSEQ Mode dependent, modes 0-7, page 0 setup. */
514 for (i = 0; i < 8; i++) {
515 asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SINDEX, 0);
516 asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCBPTR, 0);
517 asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_HEAD, 0xFFFF);
518 asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_TAIL, 0xFFFF);
519 asd_write_reg_byte(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCRPAGE, 0);
522 /* CSEQ Mode dependent, mode 0-7, page 1 and 2 shall be ignored. */
524 /* CSEQ Mode dependent, mode 8, page 0 setup. */
525 asd_write_reg_word(asd_ha, CSEQ_RET_ADDR, 0xFFFF);
526 asd_write_reg_word(asd_ha, CSEQ_RET_SCBPTR, 0);
527 asd_write_reg_word(asd_ha, CSEQ_SAVE_SCBPTR, 0);
528 asd_write_reg_word(asd_ha, CSEQ_EMPTY_TRANS_CTX, 0);
529 asd_write_reg_word(asd_ha, CSEQ_RESP_LEN, 0);
530 asd_write_reg_word(asd_ha, CSEQ_TMF_SCBPTR, 0);
531 asd_write_reg_word(asd_ha, CSEQ_GLOBAL_PREV_SCB, 0);
532 asd_write_reg_word(asd_ha, CSEQ_GLOBAL_HEAD, 0);
533 asd_write_reg_word(asd_ha, CSEQ_CLEAR_LU_HEAD, 0);
534 asd_write_reg_byte(asd_ha, CSEQ_TMF_OPCODE, 0);
535 asd_write_reg_byte(asd_ha, CSEQ_SCRATCH_FLAGS, 0);
536 asd_write_reg_word(asd_ha, CSEQ_HSB_SITE, 0);
537 asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_SCB_SITE,
538 (u16)last_scb_site_no+1);
539 asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_DDB_SITE,
540 (u16)asd_ha->hw_prof.max_ddbs);
542 /* CSEQ Mode dependent, mode 8, page 1 setup. */
543 asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR, 0);
544 asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR + 4, 0);
545 asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK, 0);
546 asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK + 4, 0);
548 /* CSEQ Mode dependent, mode 8, page 2 setup. */
549 /* Tell the sequencer the bus address of the first SCB. */
550 asd_write_reg_addr(asd_ha, CSEQ_HQ_NEW_POINTER,
551 asd_ha->seq.next_scb.dma_handle);
552 ASD_DPRINTK("First SCB dma_handle: 0x%llx\n",
553 (unsigned long long)asd_ha->seq.next_scb.dma_handle);
555 /* Tell the sequencer the first Done List entry address. */
556 asd_write_reg_addr(asd_ha, CSEQ_HQ_DONE_BASE,
557 asd_ha->seq.actual_dl->dma_handle);
559 /* Initialize the Q_DONE_POINTER with the least significant
560 * 4 bytes of the first Done List address. */
561 asd_write_reg_dword(asd_ha, CSEQ_HQ_DONE_POINTER,
562 ASD_BUSADDR_LO(asd_ha->seq.actual_dl->dma_handle));
564 asd_write_reg_byte(asd_ha, CSEQ_HQ_DONE_PASS, ASD_DEF_DL_TOGGLE);
566 /* CSEQ Mode dependent, mode 8, page 3 shall be ignored. */
570 * asd_init_cseq_scratch -- setup and init CSEQ
571 * @asd_ha: pointer to host adapter structure
573 * Setup and initialize Central sequencers. Initialize the mode
574 * independent and dependent scratch page to the default settings.
576 static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
578 asd_init_cseq_mip(asd_ha);
579 asd_init_cseq_mdp(asd_ha);
583 * asd_init_lseq_mip -- initialize LSEQ Mode independent pages 0-3
584 * @asd_ha: pointer to host adapter structure
585 * @lseq: link sequencer
587 static void asd_init_lseq_mip(struct asd_ha_struct *asd_ha, u8 lseq)
591 /* LSEQ Mode independent page 0 setup. */
592 asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_HEAD(lseq), 0xFFFF);
593 asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_TAIL(lseq), 0xFFFF);
594 asd_write_reg_byte(asd_ha, LmSEQ_LINK_NUMBER(lseq), lseq);
595 asd_write_reg_byte(asd_ha, LmSEQ_SCRATCH_FLAGS(lseq),
596 ASD_NOTIFY_ENABLE_SPINUP);
597 asd_write_reg_dword(asd_ha, LmSEQ_CONNECTION_STATE(lseq),0x08000000);
598 asd_write_reg_word(asd_ha, LmSEQ_CONCTL(lseq), 0);
599 asd_write_reg_byte(asd_ha, LmSEQ_CONSTAT(lseq), 0);
600 asd_write_reg_byte(asd_ha, LmSEQ_CONNECTION_MODES(lseq), 0);
601 asd_write_reg_word(asd_ha, LmSEQ_REG1_ISR(lseq), 0);
602 asd_write_reg_word(asd_ha, LmSEQ_REG2_ISR(lseq), 0);
603 asd_write_reg_word(asd_ha, LmSEQ_REG3_ISR(lseq), 0);
604 asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq), 0);
605 asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq)+4, 0);
607 /* LSEQ Mode independent page 1 setup. */
608 asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR0(lseq), 0xFFFF);
609 asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR1(lseq), 0xFFFF);
610 asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR2(lseq), 0xFFFF);
611 asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR3(lseq), 0xFFFF);
612 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE0(lseq), 0);
613 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE1(lseq), 0);
614 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE2(lseq), 0);
615 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE3(lseq), 0);
616 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_HEAD(lseq), 0);
617 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_TAIL(lseq), 0);
618 asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_BUF_AVAIL(lseq), 0);
619 asd_write_reg_dword(asd_ha, LmSEQ_TIMEOUT_CONST(lseq), 0);
620 asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_SINDEX(lseq), 0);
621 asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_DINDEX(lseq), 0);
623 /* LSEQ Mode Independent page 2 setup. */
624 asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR0(lseq), 0xFFFF);
625 asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR1(lseq), 0xFFFF);
626 asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR2(lseq), 0xFFFF);
627 asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR3(lseq), 0xFFFF);
628 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD0(lseq), 0);
629 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD1(lseq), 0);
630 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD2(lseq), 0);
631 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD3(lseq), 0);
632 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_HEAD(lseq), 0);
633 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_TAIL(lseq), 0);
634 asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_BUFS_AVAIL(lseq), 0);
635 for (i = 0; i < 12; i += 4)
636 asd_write_reg_dword(asd_ha, LmSEQ_ATA_SCR_REGS(lseq) + i, 0);
638 /* LSEQ Mode Independent page 3 setup. */
640 /* Device present timer timeout */
641 asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TMR_TOUT_CONST(lseq),
642 ASD_DEV_PRESENT_TIMEOUT);
644 /* SATA interlock timer disabled */
645 asd_write_reg_dword(asd_ha, LmSEQ_SATA_INTERLOCK_TIMEOUT(lseq),
646 ASD_SATA_INTERLOCK_TIMEOUT);
648 /* STP shutdown timer timeout constant, IGNORED by the sequencer,
650 asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMEOUT(lseq),
651 ASD_STP_SHUTDOWN_TIMEOUT);
653 asd_write_reg_dword(asd_ha, LmSEQ_SRST_ASSERT_TIMEOUT(lseq),
654 ASD_SRST_ASSERT_TIMEOUT);
656 asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMEOUT(lseq),
657 ASD_RCV_FIS_TIMEOUT);
659 asd_write_reg_dword(asd_ha, LmSEQ_ONE_MILLISEC_TIMEOUT(lseq),
660 ASD_ONE_MILLISEC_TIMEOUT);
663 asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(lseq),
664 ASD_TEN_MILLISEC_TIMEOUT);
666 asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMEOUT(lseq),
667 ASD_SMP_RCV_TIMEOUT);
671 * asd_init_lseq_mdp -- initialize LSEQ mode dependent pages.
672 * @asd_ha: pointer to host adapter structure
673 * @lseq: link sequencer
675 static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
682 mode2_task, /* mode 2 */
684 0xFFFF, /* mode 4/5 */
685 0xFFFF, /* mode 4/5 */
689 * Mode 0,1,2 and 4/5 have common field on page 0 for the first
692 for (i = 0; i < 3; i++) {
693 moffs = i * LSEQ_MODE_SCRATCH_SIZE;
694 asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)+moffs,
696 asd_write_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)+moffs, 0);
697 asd_write_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)+moffs, 0);
698 asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)+moffs,0xFFFF);
699 asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)+moffs,0xFFFF);
700 asd_write_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)+moffs,0);
701 asd_write_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)+moffs,0);
704 * Mode 5 page 0 overlaps the same scratch page with Mode 0 page 3.
706 asd_write_reg_word(asd_ha,
707 LmSEQ_RET_ADDR(lseq)+LSEQ_MODE5_PAGE0_OFFSET,
709 asd_write_reg_word(asd_ha,
710 LmSEQ_REG0_MODE(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
711 asd_write_reg_word(asd_ha,
712 LmSEQ_MODE_FLAGS(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
713 asd_write_reg_word(asd_ha,
714 LmSEQ_RET_ADDR2(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
715 asd_write_reg_word(asd_ha,
716 LmSEQ_RET_ADDR1(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
717 asd_write_reg_byte(asd_ha,
718 LmSEQ_OPCODE_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
719 asd_write_reg_word(asd_ha,
720 LmSEQ_DATA_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
722 /* LSEQ Mode dependent 0, page 0 setup. */
723 asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_DDB_SITE(lseq),
724 (u16)asd_ha->hw_prof.max_ddbs);
725 asd_write_reg_word(asd_ha, LmSEQ_EMPTY_TRANS_CTX(lseq), 0);
726 asd_write_reg_word(asd_ha, LmSEQ_RESP_LEN(lseq), 0);
727 asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_SCB_SITE(lseq),
728 (u16)last_scb_site_no+1);
729 asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq),
730 (u16) ((LmM0INTEN_MASK & 0xFFFF0000) >> 16));
731 asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq) + 2,
732 (u16) LmM0INTEN_MASK & 0xFFFF);
733 asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_FRM_LEN(lseq), 0);
734 asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_PROTOCOL(lseq), 0);
735 asd_write_reg_byte(asd_ha, LmSEQ_RESP_STATUS(lseq), 0);
736 asd_write_reg_byte(asd_ha, LmSEQ_LAST_LOADED_SGE(lseq), 0);
737 asd_write_reg_word(asd_ha, LmSEQ_SAVE_SCBPTR(lseq), 0);
739 /* LSEQ mode dependent, mode 1, page 0 setup. */
740 asd_write_reg_word(asd_ha, LmSEQ_Q_XMIT_HEAD(lseq), 0xFFFF);
741 asd_write_reg_word(asd_ha, LmSEQ_M1_EMPTY_TRANS_CTX(lseq), 0);
742 asd_write_reg_word(asd_ha, LmSEQ_INI_CONN_TAG(lseq), 0);
743 asd_write_reg_byte(asd_ha, LmSEQ_FAILED_OPEN_STATUS(lseq), 0);
744 asd_write_reg_byte(asd_ha, LmSEQ_XMIT_REQUEST_TYPE(lseq), 0);
745 asd_write_reg_byte(asd_ha, LmSEQ_M1_RESP_STATUS(lseq), 0);
746 asd_write_reg_byte(asd_ha, LmSEQ_M1_LAST_LOADED_SGE(lseq), 0);
747 asd_write_reg_word(asd_ha, LmSEQ_M1_SAVE_SCBPTR(lseq), 0);
749 /* LSEQ Mode dependent mode 2, page 0 setup */
750 asd_write_reg_word(asd_ha, LmSEQ_PORT_COUNTER(lseq), 0);
751 asd_write_reg_word(asd_ha, LmSEQ_PM_TABLE_PTR(lseq), 0);
752 asd_write_reg_word(asd_ha, LmSEQ_SATA_INTERLOCK_TMR_SAVE(lseq), 0);
753 asd_write_reg_word(asd_ha, LmSEQ_IP_BITL(lseq), 0);
754 asd_write_reg_word(asd_ha, LmSEQ_COPY_SMP_CONN_TAG(lseq), 0);
755 asd_write_reg_byte(asd_ha, LmSEQ_P0M2_OFFS1AH(lseq), 0);
757 /* LSEQ Mode dependent, mode 4/5, page 0 setup. */
758 asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_STATUS(lseq), 0);
759 asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_MODE(lseq), 0);
760 asd_write_reg_word(asd_ha, LmSEQ_Q_LINK_HEAD(lseq), 0xFFFF);
761 asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_ERR(lseq), 0);
762 asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_SIGNALS(lseq), 0);
763 asd_write_reg_byte(asd_ha, LmSEQ_SAS_RESET_MODE(lseq), 0);
764 asd_write_reg_byte(asd_ha, LmSEQ_LINK_RESET_RETRY_COUNT(lseq), 0);
765 asd_write_reg_byte(asd_ha, LmSEQ_NUM_LINK_RESET_RETRIES(lseq), 0);
766 asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
768 * Set the desired interval between transmissions of the NOTIFY
769 * (ENABLE SPINUP) primitive. Must be initialized to val - 1.
771 asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
772 ASD_NOTIFY_TIMEOUT - 1);
773 /* No delay for the first NOTIFY to be sent to the attached target. */
774 asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_DOWN_COUNT(lseq),
775 ASD_NOTIFY_DOWN_COUNT);
776 asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_INITIAL_COUNT(lseq),
777 ASD_NOTIFY_DOWN_COUNT);
779 /* LSEQ Mode dependent, mode 0 and 1, page 1 setup. */
780 for (i = 0; i < 2; i++) {
782 /* Start from Page 1 of Mode 0 and 1. */
783 moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
784 /* All the fields of page 1 can be initialized to 0. */
785 for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
786 asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
789 /* LSEQ Mode dependent, mode 2, page 1 setup. */
790 asd_write_reg_dword(asd_ha, LmSEQ_INVALID_DWORD_COUNT(lseq), 0);
791 asd_write_reg_dword(asd_ha, LmSEQ_DISPARITY_ERROR_COUNT(lseq), 0);
792 asd_write_reg_dword(asd_ha, LmSEQ_LOSS_OF_SYNC_COUNT(lseq), 0);
794 /* LSEQ Mode dependent, mode 4/5, page 1. */
795 for (i = 0; i < LSEQ_PAGE_SIZE; i+=4)
796 asd_write_reg_dword(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq)+i, 0);
797 asd_write_reg_byte(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq), 0xFF);
798 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq), 0xFF);
799 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+1,0xFF);
800 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+2,0xFF);
801 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq), 0xFF);
802 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+1, 0xFF);
803 asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+2, 0xFF);
804 asd_write_reg_dword(asd_ha, LmSEQ_DATA_OFFSET(lseq), 0xFFFFFFFF);
806 /* LSEQ Mode dependent, mode 0, page 2 setup. */
807 asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMER_TERM_TS(lseq), 0);
808 asd_write_reg_byte(asd_ha, LmSEQ_DEVICE_BITS(lseq), 0);
809 asd_write_reg_word(asd_ha, LmSEQ_SDB_DDB(lseq), 0);
810 asd_write_reg_byte(asd_ha, LmSEQ_SDB_NUM_TAGS(lseq), 0);
811 asd_write_reg_byte(asd_ha, LmSEQ_SDB_CURR_TAG(lseq), 0);
813 /* LSEQ Mode Dependent 1, page 2 setup. */
814 asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq), 0);
815 asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq)+4, 0);
816 asd_write_reg_dword(asd_ha, LmSEQ_OPEN_TIMER_TERM_TS(lseq), 0);
817 asd_write_reg_dword(asd_ha, LmSEQ_SRST_AS_TIMER_TERM_TS(lseq), 0);
818 asd_write_reg_dword(asd_ha, LmSEQ_LAST_LOADED_SG_EL(lseq), 0);
820 /* LSEQ Mode Dependent 2, page 2 setup. */
821 /* The LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS is IGNORED by the sequencer,
823 asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(lseq),0);
824 asd_write_reg_dword(asd_ha, LmSEQ_CLOSE_TIMER_TERM_TS(lseq), 0);
825 asd_write_reg_dword(asd_ha, LmSEQ_BREAK_TIMER_TERM_TS(lseq), 0);
826 asd_write_reg_dword(asd_ha, LmSEQ_DWS_RESET_TIMER_TERM_TS(lseq), 0);
827 asd_write_reg_dword(asd_ha,LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(lseq),0);
828 asd_write_reg_dword(asd_ha, LmSEQ_MCTL_TIMER_TERM_TS(lseq), 0);
830 /* LSEQ Mode Dependent 4/5, page 2 setup. */
831 asd_write_reg_dword(asd_ha, LmSEQ_COMINIT_TIMER_TERM_TS(lseq), 0);
832 asd_write_reg_dword(asd_ha, LmSEQ_RCV_ID_TIMER_TERM_TS(lseq), 0);
833 asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMER_TERM_TS(lseq), 0);
834 asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TIMER_TERM_TS(lseq), 0);
838 * asd_init_lseq_scratch -- setup and init link sequencers
839 * @asd_ha: pointer to host adapter struct
841 static void asd_init_lseq_scratch(struct asd_ha_struct *asd_ha)
846 lseq_mask = asd_ha->hw_prof.enabled_phys;
847 for_each_sequencer(lseq_mask, lseq_mask, lseq) {
848 asd_init_lseq_mip(asd_ha, lseq);
849 asd_init_lseq_mdp(asd_ha, lseq);
854 * asd_init_scb_sites -- initialize sequencer SCB sites (memory).
855 * @asd_ha: pointer to host adapter structure
857 * This should be done before initializing common CSEQ and LSEQ
858 * scratch since those areas depend on some computed values here,
859 * last_scb_site_no, etc.
861 static void asd_init_scb_sites(struct asd_ha_struct *asd_ha)
866 for (site_no = asd_ha->hw_prof.max_scbs-1;
871 /* Initialize all fields in the SCB site to 0. */
872 for (i = 0; i < ASD_SCB_SIZE; i += 4)
873 asd_scbsite_write_dword(asd_ha, site_no, i, 0);
875 /* Initialize SCB Site Opcode field to invalid. */
876 asd_scbsite_write_byte(asd_ha, site_no,
877 offsetof(struct scb_header, opcode),
880 /* Initialize SCB Site Flags field to mean a response
881 * frame has been received. This means inadvertent
882 * frames received to be dropped. */
883 asd_scbsite_write_byte(asd_ha, site_no, 0x49, 0x01);
885 /* Workaround needed by SEQ to fix a SATA issue is to exclude
886 * certain SCB sites from the free list. */
887 if (!SCB_SITE_VALID(site_no))
890 if (last_scb_site_no == 0)
891 last_scb_site_no = site_no;
893 /* For every SCB site, we need to initialize the
894 * following fields: Q_NEXT, SCB_OPCODE, SCB_FLAGS,
895 * and SG Element Flag. */
897 /* Q_NEXT field of the last SCB is invalidated. */
898 asd_scbsite_write_word(asd_ha, site_no, 0, first_scb_site_no);
900 first_scb_site_no = site_no;
903 asd_ha->hw_prof.max_scbs = max_scbs;
904 ASD_DPRINTK("max_scbs:%d\n", asd_ha->hw_prof.max_scbs);
905 ASD_DPRINTK("first_scb_site_no:0x%x\n", first_scb_site_no);
906 ASD_DPRINTK("last_scb_site_no:0x%x\n", last_scb_site_no);
910 * asd_init_cseq_cio - initialize CSEQ CIO registers
911 * @asd_ha: pointer to host adapter structure
913 static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
917 asd_write_reg_byte(asd_ha, CSEQCOMINTEN, 0);
918 asd_write_reg_byte(asd_ha, CSEQDLCTL, ASD_DL_SIZE_BITS);
919 asd_write_reg_byte(asd_ha, CSEQDLOFFS, 0);
920 asd_write_reg_byte(asd_ha, CSEQDLOFFS+1, 0);
921 asd_ha->seq.scbpro = 0;
922 asd_write_reg_dword(asd_ha, SCBPRO, 0);
923 asd_write_reg_dword(asd_ha, CSEQCON, 0);
925 /* Initialize CSEQ Mode 11 Interrupt Vectors.
926 * The addresses are 16 bit wide and in dword units.
927 * The values of their macros are in byte units.
928 * Thus we have to divide by 4. */
929 asd_write_reg_word(asd_ha, CM11INTVEC0, cseq_vecs[0]);
930 asd_write_reg_word(asd_ha, CM11INTVEC1, cseq_vecs[1]);
931 asd_write_reg_word(asd_ha, CM11INTVEC2, cseq_vecs[2]);
933 /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
934 asd_write_reg_byte(asd_ha, CARP2INTEN, EN_ARP2HALTC);
936 /* Initialize CSEQ Scratch Page to 0x04. */
937 asd_write_reg_byte(asd_ha, CSCRATCHPAGE, 0x04);
939 /* Initialize CSEQ Mode[0-8] Dependent registers. */
940 /* Initialize Scratch Page to 0. */
941 for (i = 0; i < 9; i++)
942 asd_write_reg_byte(asd_ha, CMnSCRATCHPAGE(i), 0);
944 /* Reset the ARP2 Program Count. */
945 asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
947 for (i = 0; i < 8; i++) {
948 /* Initialize Mode n Link m Interrupt Enable. */
949 asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
950 /* Initialize Mode n Request Mailbox. */
951 asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);
956 * asd_init_lseq_cio -- initialize LmSEQ CIO registers
957 * @asd_ha: pointer to host adapter structure
958 * @lseq: link sequencer
960 static void asd_init_lseq_cio(struct asd_ha_struct *asd_ha, int lseq)
965 /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
966 asd_write_reg_dword(asd_ha, LmARP2INTEN(lseq), EN_ARP2HALTC);
968 asd_write_reg_byte(asd_ha, LmSCRATCHPAGE(lseq), 0);
970 /* Initialize Mode 0,1, and 2 SCRATCHPAGE to 0. */
971 for (i = 0; i < 3; i++)
972 asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, i), 0);
974 /* Initialize Mode 5 SCRATCHPAGE to 0. */
975 asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, 5), 0);
977 asd_write_reg_dword(asd_ha, LmRSPMBX(lseq), 0);
978 /* Initialize Mode 0,1,2 and 5 Interrupt Enable and
979 * Interrupt registers. */
980 asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 0), LmM0INTEN_MASK);
981 asd_write_reg_dword(asd_ha, LmMnINT(lseq, 0), 0xFFFFFFFF);
983 asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 1), LmM1INTEN_MASK);
984 asd_write_reg_dword(asd_ha, LmMnINT(lseq, 1), 0xFFFFFFFF);
986 asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 2), LmM2INTEN_MASK);
987 asd_write_reg_dword(asd_ha, LmMnINT(lseq, 2), 0xFFFFFFFF);
989 asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 5), LmM5INTEN_MASK);
990 asd_write_reg_dword(asd_ha, LmMnINT(lseq, 5), 0xFFFFFFFF);
992 /* Enable HW Timer status. */
993 asd_write_reg_byte(asd_ha, LmHWTSTATEN(lseq), LmHWTSTATEN_MASK);
995 /* Enable Primitive Status 0 and 1. */
996 asd_write_reg_dword(asd_ha, LmPRIMSTAT0EN(lseq), LmPRIMSTAT0EN_MASK);
997 asd_write_reg_dword(asd_ha, LmPRIMSTAT1EN(lseq), LmPRIMSTAT1EN_MASK);
999 /* Enable Frame Error. */
1000 asd_write_reg_dword(asd_ha, LmFRMERREN(lseq), LmFRMERREN_MASK);
1001 asd_write_reg_byte(asd_ha, LmMnHOLDLVL(lseq, 0), 0x50);
1003 /* Initialize Mode 0 Transfer Level to 512. */
1004 asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 0), LmMnXFRLVL_512);
1005 /* Initialize Mode 1 Transfer Level to 256. */
1006 asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 1), LmMnXFRLVL_256);
1008 /* Initialize Program Count. */
1009 asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
1011 /* Enable Blind SG Move. */
1012 asd_write_reg_dword(asd_ha, LmMODECTL(lseq), LmBLIND48);
1013 asd_write_reg_word(asd_ha, LmM3SATATIMER(lseq),
1014 ASD_SATA_INTERLOCK_TIMEOUT);
1016 (void) asd_read_reg_dword(asd_ha, LmREQMBX(lseq));
1018 /* Clear Primitive Status 0 and 1. */
1019 asd_write_reg_dword(asd_ha, LmPRMSTAT0(lseq), 0xFFFFFFFF);
1020 asd_write_reg_dword(asd_ha, LmPRMSTAT1(lseq), 0xFFFFFFFF);
1022 /* Clear HW Timer status. */
1023 asd_write_reg_byte(asd_ha, LmHWTSTAT(lseq), 0xFF);
1025 /* Clear DMA Errors for Mode 0 and 1. */
1026 asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 0), 0xFF);
1027 asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 1), 0xFF);
1029 /* Clear SG DMA Errors for Mode 0 and 1. */
1030 asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 0), 0xFF);
1031 asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 1), 0xFF);
1033 /* Clear Mode 0 Buffer Parity Error. */
1034 asd_write_reg_byte(asd_ha, LmMnBUFSTAT(lseq, 0), LmMnBUFPERR);
1036 /* Clear Mode 0 Frame Error register. */
1037 asd_write_reg_dword(asd_ha, LmMnFRMERR(lseq, 0), 0xFFFFFFFF);
1039 /* Reset LSEQ external interrupt arbiter. */
1040 asd_write_reg_byte(asd_ha, LmARP2INTCTL(lseq), RSTINTCTL);
1042 /* Set the Phy SAS for the LmSEQ WWN. */
1043 sas_addr = asd_ha->phys[lseq].phy_desc->sas_addr;
1044 for (i = 0; i < SAS_ADDR_SIZE; i++)
1045 asd_write_reg_byte(asd_ha, LmWWN(lseq) + i, sas_addr[i]);
1047 /* Set the Transmit Size to 1024 bytes, 0 = 256 Dwords. */
1048 asd_write_reg_byte(asd_ha, LmMnXMTSIZE(lseq, 1), 0);
1050 /* Set the Bus Inactivity Time Limit Timer. */
1051 asd_write_reg_word(asd_ha, LmBITL_TIMER(lseq), 9);
1053 /* Enable SATA Port Multiplier. */
1054 asd_write_reg_byte(asd_ha, LmMnSATAFS(lseq, 1), 0x80);
1056 /* Initialize Interrupt Vector[0-10] address in Mode 3.
1057 * See the comment on CSEQ_INT_* */
1058 asd_write_reg_word(asd_ha, LmM3INTVEC0(lseq), lseq_vecs[0]);
1059 asd_write_reg_word(asd_ha, LmM3INTVEC1(lseq), lseq_vecs[1]);
1060 asd_write_reg_word(asd_ha, LmM3INTVEC2(lseq), lseq_vecs[2]);
1061 asd_write_reg_word(asd_ha, LmM3INTVEC3(lseq), lseq_vecs[3]);
1062 asd_write_reg_word(asd_ha, LmM3INTVEC4(lseq), lseq_vecs[4]);
1063 asd_write_reg_word(asd_ha, LmM3INTVEC5(lseq), lseq_vecs[5]);
1064 asd_write_reg_word(asd_ha, LmM3INTVEC6(lseq), lseq_vecs[6]);
1065 asd_write_reg_word(asd_ha, LmM3INTVEC7(lseq), lseq_vecs[7]);
1066 asd_write_reg_word(asd_ha, LmM3INTVEC8(lseq), lseq_vecs[8]);
1067 asd_write_reg_word(asd_ha, LmM3INTVEC9(lseq), lseq_vecs[9]);
1068 asd_write_reg_word(asd_ha, LmM3INTVEC10(lseq), lseq_vecs[10]);
1070 * Program the Link LED control, applicable only for
1071 * Chip Rev. B or later.
1073 asd_write_reg_dword(asd_ha, LmCONTROL(lseq),
1074 (LEDTIMER | LEDMODE_TXRX | LEDTIMERS_100ms));
1076 /* Set the Align Rate for SAS and STP mode. */
1077 asd_write_reg_byte(asd_ha, LmM1SASALIGN(lseq), SAS_ALIGN_DEFAULT);
1078 asd_write_reg_byte(asd_ha, LmM1STPALIGN(lseq), STP_ALIGN_DEFAULT);
1083 * asd_post_init_cseq -- clear CSEQ Mode n Int. status and Response mailbox
1084 * @asd_ha: pointer to host adapter struct
1086 static void asd_post_init_cseq(struct asd_ha_struct *asd_ha)
1090 for (i = 0; i < 8; i++)
1091 asd_write_reg_dword(asd_ha, CMnINT(i), 0xFFFFFFFF);
1092 for (i = 0; i < 8; i++)
1093 asd_read_reg_dword(asd_ha, CMnRSPMBX(i));
1094 /* Reset the external interrupt arbiter. */
1095 asd_write_reg_byte(asd_ha, CARP2INTCTL, RSTINTCTL);
1099 * asd_init_ddb_0 -- initialize DDB 0
1100 * @asd_ha: pointer to host adapter structure
1102 * Initialize DDB site 0 which is used internally by the sequencer.
1104 static void asd_init_ddb_0(struct asd_ha_struct *asd_ha)
1108 /* Zero out the DDB explicitly */
1109 for (i = 0; i < sizeof(struct asd_ddb_seq_shared); i+=4)
1110 asd_ddbsite_write_dword(asd_ha, 0, i, 0);
1112 asd_ddbsite_write_word(asd_ha, 0,
1113 offsetof(struct asd_ddb_seq_shared, q_free_ddb_head), 0);
1114 asd_ddbsite_write_word(asd_ha, 0,
1115 offsetof(struct asd_ddb_seq_shared, q_free_ddb_tail),
1116 asd_ha->hw_prof.max_ddbs-1);
1117 asd_ddbsite_write_word(asd_ha, 0,
1118 offsetof(struct asd_ddb_seq_shared, q_free_ddb_cnt), 0);
1119 asd_ddbsite_write_word(asd_ha, 0,
1120 offsetof(struct asd_ddb_seq_shared, q_used_ddb_head), 0xFFFF);
1121 asd_ddbsite_write_word(asd_ha, 0,
1122 offsetof(struct asd_ddb_seq_shared, q_used_ddb_tail), 0xFFFF);
1123 asd_ddbsite_write_word(asd_ha, 0,
1124 offsetof(struct asd_ddb_seq_shared, shared_mem_lock), 0);
1125 asd_ddbsite_write_word(asd_ha, 0,
1126 offsetof(struct asd_ddb_seq_shared, smp_conn_tag), 0);
1127 asd_ddbsite_write_word(asd_ha, 0,
1128 offsetof(struct asd_ddb_seq_shared, est_nexus_buf_cnt), 0);
1129 asd_ddbsite_write_word(asd_ha, 0,
1130 offsetof(struct asd_ddb_seq_shared, est_nexus_buf_thresh),
1131 asd_ha->hw_prof.num_phys * 2);
1132 asd_ddbsite_write_byte(asd_ha, 0,
1133 offsetof(struct asd_ddb_seq_shared, settable_max_contexts),0);
1134 asd_ddbsite_write_byte(asd_ha, 0,
1135 offsetof(struct asd_ddb_seq_shared, conn_not_active), 0xFF);
1136 asd_ddbsite_write_byte(asd_ha, 0,
1137 offsetof(struct asd_ddb_seq_shared, phy_is_up), 0x00);
1138 /* DDB 0 is reserved */
1139 set_bit(0, asd_ha->hw_prof.ddb_bitmap);
1142 static void asd_seq_init_ddb_sites(struct asd_ha_struct *asd_ha)
1145 unsigned int ddb_site;
1147 for (ddb_site = 0 ; ddb_site < ASD_MAX_DDBS; ddb_site++)
1148 for (i = 0; i < sizeof(struct asd_ddb_ssp_smp_target_port); i+= 4)
1149 asd_ddbsite_write_dword(asd_ha, ddb_site, i, 0);
1153 * asd_seq_setup_seqs -- setup and initialize central and link sequencers
1154 * @asd_ha: pointer to host adapter structure
1156 static void asd_seq_setup_seqs(struct asd_ha_struct *asd_ha)
1161 /* Initialize DDB sites */
1162 asd_seq_init_ddb_sites(asd_ha);
1164 /* Initialize SCB sites. Done first to compute some values which
1165 * the rest of the init code depends on. */
1166 asd_init_scb_sites(asd_ha);
1168 /* Initialize CSEQ Scratch RAM registers. */
1169 asd_init_cseq_scratch(asd_ha);
1171 /* Initialize LmSEQ Scratch RAM registers. */
1172 asd_init_lseq_scratch(asd_ha);
1174 /* Initialize CSEQ CIO registers. */
1175 asd_init_cseq_cio(asd_ha);
1177 asd_init_ddb_0(asd_ha);
1179 /* Initialize LmSEQ CIO registers. */
1180 lseq_mask = asd_ha->hw_prof.enabled_phys;
1181 for_each_sequencer(lseq_mask, lseq_mask, lseq)
1182 asd_init_lseq_cio(asd_ha, lseq);
1183 asd_post_init_cseq(asd_ha);
1188 * asd_seq_start_cseq -- start the central sequencer, CSEQ
1189 * @asd_ha: pointer to host adapter structure
1191 static int asd_seq_start_cseq(struct asd_ha_struct *asd_ha)
1193 /* Reset the ARP2 instruction to location zero. */
1194 asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
1196 /* Unpause the CSEQ */
1197 return asd_unpause_cseq(asd_ha);
1201 * asd_seq_start_lseq -- start a link sequencer
1202 * @asd_ha: pointer to host adapter structure
1203 * @lseq: the link sequencer of interest
1205 static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq)
1207 /* Reset the ARP2 instruction to location zero. */
1208 asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
1210 /* Unpause the LmSEQ */
1211 return asd_seq_unpause_lseq(asd_ha, lseq);
1214 int asd_release_firmware(void)
1216 release_firmware(sequencer_fw);
1220 static int asd_request_firmware(struct asd_ha_struct *asd_ha)
1223 struct sequencer_file_header header;
1224 const struct sequencer_file_header *hdr_ptr;
1226 u16 *ptr_cseq_vecs, *ptr_lseq_vecs;
1229 /* already loaded */
1232 err = request_firmware(&sequencer_fw,
1233 SAS_RAZOR_SEQUENCER_FW_FILE,
1234 &asd_ha->pcidev->dev);
1238 hdr_ptr = (const struct sequencer_file_header *)sequencer_fw->data;
1240 header.csum = le32_to_cpu(hdr_ptr->csum);
1241 header.major = le32_to_cpu(hdr_ptr->major);
1242 header.minor = le32_to_cpu(hdr_ptr->minor);
1243 header.cseq_table_offset = le32_to_cpu(hdr_ptr->cseq_table_offset);
1244 header.cseq_table_size = le32_to_cpu(hdr_ptr->cseq_table_size);
1245 header.lseq_table_offset = le32_to_cpu(hdr_ptr->lseq_table_offset);
1246 header.lseq_table_size = le32_to_cpu(hdr_ptr->lseq_table_size);
1247 header.cseq_code_offset = le32_to_cpu(hdr_ptr->cseq_code_offset);
1248 header.cseq_code_size = le32_to_cpu(hdr_ptr->cseq_code_size);
1249 header.lseq_code_offset = le32_to_cpu(hdr_ptr->lseq_code_offset);
1250 header.lseq_code_size = le32_to_cpu(hdr_ptr->lseq_code_size);
1251 header.mode2_task = le16_to_cpu(hdr_ptr->mode2_task);
1252 header.cseq_idle_loop = le16_to_cpu(hdr_ptr->cseq_idle_loop);
1253 header.lseq_idle_loop = le16_to_cpu(hdr_ptr->lseq_idle_loop);
1255 for (i = sizeof(header.csum); i < sequencer_fw->size; i++)
1256 csum += sequencer_fw->data[i];
1258 if (csum != header.csum) {
1259 asd_printk("Firmware file checksum mismatch\n");
1263 if (header.cseq_table_size != CSEQ_NUM_VECS ||
1264 header.lseq_table_size != LSEQ_NUM_VECS) {
1265 asd_printk("Firmware file table size mismatch\n");
1269 asd_printk("Found sequencer Firmware version %d.%d (%s)\n",
1270 header.major, header.minor, hdr_ptr->version);
1272 if (header.major != SAS_RAZOR_SEQUENCER_FW_MAJOR) {
1273 asd_printk("Firmware Major Version Mismatch;"
1274 "driver requires version %d.X",
1275 SAS_RAZOR_SEQUENCER_FW_MAJOR);
1279 ptr_cseq_vecs = (u16 *)&sequencer_fw->data[header.cseq_table_offset];
1280 ptr_lseq_vecs = (u16 *)&sequencer_fw->data[header.lseq_table_offset];
1281 mode2_task = header.mode2_task;
1282 cseq_idle_loop = header.cseq_idle_loop;
1283 lseq_idle_loop = header.lseq_idle_loop;
1285 for (i = 0; i < CSEQ_NUM_VECS; i++)
1286 cseq_vecs[i] = le16_to_cpu(ptr_cseq_vecs[i]);
1288 for (i = 0; i < LSEQ_NUM_VECS; i++)
1289 lseq_vecs[i] = le16_to_cpu(ptr_lseq_vecs[i]);
1291 cseq_code = &sequencer_fw->data[header.cseq_code_offset];
1292 cseq_code_size = header.cseq_code_size;
1293 lseq_code = &sequencer_fw->data[header.lseq_code_offset];
1294 lseq_code_size = header.lseq_code_size;
1299 int asd_init_seqs(struct asd_ha_struct *asd_ha)
1303 err = asd_request_firmware(asd_ha);
1306 asd_printk("Failed to load sequencer firmware file %s, error %d\n",
1307 SAS_RAZOR_SEQUENCER_FW_FILE, err);
1311 err = asd_seq_download_seqs(asd_ha);
1313 asd_printk("couldn't download sequencers for %s\n",
1314 pci_name(asd_ha->pcidev));
1318 asd_seq_setup_seqs(asd_ha);
1323 int asd_start_seqs(struct asd_ha_struct *asd_ha)
1329 err = asd_seq_start_cseq(asd_ha);
1331 asd_printk("couldn't start CSEQ for %s\n",
1332 pci_name(asd_ha->pcidev));
1336 lseq_mask = asd_ha->hw_prof.enabled_phys;
1337 for_each_sequencer(lseq_mask, lseq_mask, lseq) {
1338 err = asd_seq_start_lseq(asd_ha, lseq);
1340 asd_printk("couldn't start LSEQ %d for %s\n", lseq,
1341 pci_name(asd_ha->pcidev));
1350 * asd_update_port_links -- update port_map_by_links and phy_is_up
1351 * @asd_ha: pointer to host adapter structure
1352 * @phy: pointer to the phy which has been added to a port
1354 * 1) When a link reset has completed and we got BYTES DMAED with a
1355 * valid frame we call this function for that phy, to indicate that
1356 * the phy is up, i.e. we update the phy_is_up in DDB 0. The
1357 * sequencer checks phy_is_up when pending SCBs are to be sent, and
1358 * when an open address frame has been received.
1360 * 2) When we know of ports, we call this function to update the map
1361 * of phys participaing in that port, i.e. we update the
1362 * port_map_by_links in DDB 0. When a HARD_RESET primitive has been
1363 * received, the sequencer disables all phys in that port.
1364 * port_map_by_links is also used as the conn_mask byte in the
1365 * initiator/target port DDB.
1367 void asd_update_port_links(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
1369 const u8 phy_mask = (u8) phy->asd_port->phy_mask;
1373 unsigned long flags;
1375 spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
1376 for_each_phy(phy_mask, mask, i)
1377 asd_ddbsite_write_byte(asd_ha, 0,
1378 offsetof(struct asd_ddb_seq_shared,
1379 port_map_by_links)+i,phy_mask);
1381 for (i = 0; i < 12; i++) {
1382 phy_is_up = asd_ddbsite_read_byte(asd_ha, 0,
1383 offsetof(struct asd_ddb_seq_shared, phy_is_up));
1384 err = asd_ddbsite_update_byte(asd_ha, 0,
1385 offsetof(struct asd_ddb_seq_shared, phy_is_up),
1387 phy_is_up | phy_mask);
1390 else if (err == -EFAULT) {
1391 asd_printk("phy_is_up: parity error in DDB 0\n");
1395 spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
1398 asd_printk("couldn't update DDB 0:error:%d\n", err);
1401 MODULE_FIRMWARE(SAS_RAZOR_SEQUENCER_FW_FILE);