1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Intersil ISL1208 rtc class driver
5 * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
10 #include <linux/module.h>
11 #include <linux/of_device.h>
12 #include <linux/of_irq.h>
13 #include <linux/rtc.h>
17 #define ISL1208_REG_SC 0x00
18 #define ISL1208_REG_MN 0x01
19 #define ISL1208_REG_HR 0x02
20 #define ISL1208_REG_HR_MIL (1<<7) /* 24h/12h mode */
21 #define ISL1208_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
22 #define ISL1208_REG_DT 0x03
23 #define ISL1208_REG_MO 0x04
24 #define ISL1208_REG_YR 0x05
25 #define ISL1208_REG_DW 0x06
26 #define ISL1208_RTC_SECTION_LEN 7
28 /* control/status section */
29 #define ISL1208_REG_SR 0x07
30 #define ISL1208_REG_SR_ARST (1<<7) /* auto reset */
31 #define ISL1208_REG_SR_XTOSCB (1<<6) /* crystal oscillator */
32 #define ISL1208_REG_SR_WRTC (1<<4) /* write rtc */
33 #define ISL1208_REG_SR_EVT (1<<3) /* event */
34 #define ISL1208_REG_SR_ALM (1<<2) /* alarm */
35 #define ISL1208_REG_SR_BAT (1<<1) /* battery */
36 #define ISL1208_REG_SR_RTCF (1<<0) /* rtc fail */
37 #define ISL1208_REG_INT 0x08
38 #define ISL1208_REG_INT_ALME (1<<6) /* alarm enable */
39 #define ISL1208_REG_INT_IM (1<<7) /* interrupt/alarm mode */
40 #define ISL1219_REG_EV 0x09
41 #define ISL1219_REG_EV_EVEN (1<<4) /* event detection enable */
42 #define ISL1219_REG_EV_EVIENB (1<<7) /* event in pull-up disable */
43 #define ISL1208_REG_ATR 0x0a
44 #define ISL1208_REG_DTR 0x0b
47 #define ISL1208_REG_SCA 0x0c
48 #define ISL1208_REG_MNA 0x0d
49 #define ISL1208_REG_HRA 0x0e
50 #define ISL1208_REG_DTA 0x0f
51 #define ISL1208_REG_MOA 0x10
52 #define ISL1208_REG_DWA 0x11
53 #define ISL1208_ALARM_SECTION_LEN 6
56 #define ISL1208_REG_USR1 0x12
57 #define ISL1208_REG_USR2 0x13
58 #define ISL1208_USR_SECTION_LEN 2
61 #define ISL1219_REG_SCT 0x14
62 #define ISL1219_REG_MNT 0x15
63 #define ISL1219_REG_HRT 0x16
64 #define ISL1219_REG_DTT 0x17
65 #define ISL1219_REG_MOT 0x18
66 #define ISL1219_REG_YRT 0x19
67 #define ISL1219_EVT_SECTION_LEN 6
69 static struct i2c_driver isl1208_driver;
71 /* ISL1208 various variants */
80 /* Chip capabilities table */
81 static const struct isl1208_config {
83 unsigned int nvmem_length;
84 unsigned has_tamper:1;
85 unsigned has_timestamp:1;
86 } isl1208_configs[] = {
87 [TYPE_ISL1208] = { "isl1208", 2, false, false },
88 [TYPE_ISL1209] = { "isl1209", 2, true, false },
89 [TYPE_ISL1218] = { "isl1218", 8, false, false },
90 [TYPE_ISL1219] = { "isl1219", 2, true, true },
93 static const struct i2c_device_id isl1208_id[] = {
94 { "isl1208", TYPE_ISL1208 },
95 { "isl1209", TYPE_ISL1209 },
96 { "isl1218", TYPE_ISL1218 },
97 { "isl1219", TYPE_ISL1219 },
100 MODULE_DEVICE_TABLE(i2c, isl1208_id);
102 static const __maybe_unused struct of_device_id isl1208_of_match[] = {
103 { .compatible = "isil,isl1208", .data = &isl1208_configs[TYPE_ISL1208] },
104 { .compatible = "isil,isl1209", .data = &isl1208_configs[TYPE_ISL1209] },
105 { .compatible = "isil,isl1218", .data = &isl1208_configs[TYPE_ISL1218] },
106 { .compatible = "isil,isl1219", .data = &isl1208_configs[TYPE_ISL1219] },
109 MODULE_DEVICE_TABLE(of, isl1208_of_match);
112 struct isl1208_state {
113 struct nvmem_config nvmem_config;
114 struct rtc_device *rtc;
115 const struct isl1208_config *config;
120 isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
125 WARN_ON(reg > ISL1219_REG_YRT);
126 WARN_ON(reg + len > ISL1219_REG_YRT + 1);
128 ret = i2c_smbus_read_i2c_block_data(client, reg, len, buf);
129 return (ret < 0) ? ret : 0;
134 isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
139 WARN_ON(reg > ISL1219_REG_YRT);
140 WARN_ON(reg + len > ISL1219_REG_YRT + 1);
142 ret = i2c_smbus_write_i2c_block_data(client, reg, len, buf);
143 return (ret < 0) ? ret : 0;
146 /* simple check to see whether we have a isl1208 */
148 isl1208_i2c_validate_client(struct i2c_client *client)
150 u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
151 u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
152 0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
157 ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
161 for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
162 if (regs[i] & zero_mask[i]) /* check if bits are cleared */
170 isl1208_i2c_get_sr(struct i2c_client *client)
172 return i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
176 isl1208_i2c_get_atr(struct i2c_client *client)
178 int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
182 /* The 6bit value in the ATR register controls the load
183 * capacitance C_load * in steps of 0.25pF
185 * bit (1<<5) of the ATR register is inverted
187 * C_load(ATR=0x20) = 4.50pF
188 * C_load(ATR=0x00) = 12.50pF
189 * C_load(ATR=0x1f) = 20.25pF
193 atr &= 0x3f; /* mask out lsb */
194 atr ^= 1 << 5; /* invert 6th bit */
195 atr += 2 * 9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
200 /* returns adjustment value + 100 */
202 isl1208_i2c_get_dtr(struct i2c_client *client)
204 int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
208 /* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
209 dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
215 isl1208_i2c_get_usr(struct i2c_client *client)
217 u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
220 ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
221 ISL1208_USR_SECTION_LEN);
225 return (buf[1] << 8) | buf[0];
229 isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
231 u8 buf[ISL1208_USR_SECTION_LEN];
234 buf[1] = (usr >> 8) & 0xff;
236 return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
237 ISL1208_USR_SECTION_LEN);
241 isl1208_rtc_toggle_alarm(struct i2c_client *client, int enable)
243 int icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
246 dev_err(&client->dev, "%s: reading INT failed\n", __func__);
251 icr |= ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM;
253 icr &= ~(ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM);
255 icr = i2c_smbus_write_byte_data(client, ISL1208_REG_INT, icr);
257 dev_err(&client->dev, "%s: writing INT failed\n", __func__);
265 isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
267 struct i2c_client *const client = to_i2c_client(dev);
268 int sr, dtr, atr, usr;
270 sr = isl1208_i2c_get_sr(client);
272 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
276 seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
277 (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
278 (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
279 (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
280 (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
281 (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
282 (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
284 seq_printf(seq, "batt_status\t: %s\n",
285 (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
287 dtr = isl1208_i2c_get_dtr(client);
289 seq_printf(seq, "digital_trim\t: %d ppm\n", dtr - 100);
291 atr = isl1208_i2c_get_atr(client);
293 seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
294 atr >> 2, (atr & 0x3) * 25);
296 usr = isl1208_i2c_get_usr(client);
298 seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
304 isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
307 u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
309 sr = isl1208_i2c_get_sr(client);
311 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
315 sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
317 dev_err(&client->dev, "%s: reading RTC section failed\n",
322 tm->tm_sec = bcd2bin(regs[ISL1208_REG_SC]);
323 tm->tm_min = bcd2bin(regs[ISL1208_REG_MN]);
325 /* HR field has a more complex interpretation */
327 const u8 _hr = regs[ISL1208_REG_HR];
328 if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
329 tm->tm_hour = bcd2bin(_hr & 0x3f);
332 tm->tm_hour = bcd2bin(_hr & 0x1f);
333 if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
338 tm->tm_mday = bcd2bin(regs[ISL1208_REG_DT]);
339 tm->tm_mon = bcd2bin(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
340 tm->tm_year = bcd2bin(regs[ISL1208_REG_YR]) + 100;
341 tm->tm_wday = bcd2bin(regs[ISL1208_REG_DW]);
347 isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
349 struct rtc_time *const tm = &alarm->time;
350 u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
351 int icr, yr, sr = isl1208_i2c_get_sr(client);
354 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
358 sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
359 ISL1208_ALARM_SECTION_LEN);
361 dev_err(&client->dev, "%s: reading alarm section failed\n",
366 /* MSB of each alarm register is an enable bit */
367 tm->tm_sec = bcd2bin(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
368 tm->tm_min = bcd2bin(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
369 tm->tm_hour = bcd2bin(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
370 tm->tm_mday = bcd2bin(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
372 bcd2bin(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
373 tm->tm_wday = bcd2bin(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
375 /* The alarm doesn't store the year so get it from the rtc section */
376 yr = i2c_smbus_read_byte_data(client, ISL1208_REG_YR);
378 dev_err(&client->dev, "%s: reading RTC YR failed\n", __func__);
381 tm->tm_year = bcd2bin(yr) + 100;
383 icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
385 dev_err(&client->dev, "%s: reading INT failed\n", __func__);
388 alarm->enabled = !!(icr & ISL1208_REG_INT_ALME);
394 isl1208_i2c_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
396 struct rtc_time *alarm_tm = &alarm->time;
397 u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
398 const int offs = ISL1208_REG_SCA;
399 struct rtc_time rtc_tm;
402 err = isl1208_i2c_read_time(client, &rtc_tm);
406 /* If the alarm time is before the current time disable the alarm */
407 if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
412 /* Program the alarm and enable it for each setting */
413 regs[ISL1208_REG_SCA - offs] = bin2bcd(alarm_tm->tm_sec) | enable;
414 regs[ISL1208_REG_MNA - offs] = bin2bcd(alarm_tm->tm_min) | enable;
415 regs[ISL1208_REG_HRA - offs] = bin2bcd(alarm_tm->tm_hour) |
416 ISL1208_REG_HR_MIL | enable;
418 regs[ISL1208_REG_DTA - offs] = bin2bcd(alarm_tm->tm_mday) | enable;
419 regs[ISL1208_REG_MOA - offs] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
420 regs[ISL1208_REG_DWA - offs] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
422 /* write ALARM registers */
423 err = isl1208_i2c_set_regs(client, offs, regs,
424 ISL1208_ALARM_SECTION_LEN);
426 dev_err(&client->dev, "%s: writing ALARM section failed\n",
431 err = isl1208_rtc_toggle_alarm(client, enable);
439 isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
441 return isl1208_i2c_read_time(to_i2c_client(dev), tm);
445 isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
448 u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
450 /* The clock has an 8 bit wide bcd-coded register (they never learn)
451 * for the year. tm_year is an offset from 1900 and we are interested
452 * in the 2000-2099 range, so any value less than 100 is invalid.
454 if (tm->tm_year < 100)
457 regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
458 regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
459 regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
461 regs[ISL1208_REG_DT] = bin2bcd(tm->tm_mday);
462 regs[ISL1208_REG_MO] = bin2bcd(tm->tm_mon + 1);
463 regs[ISL1208_REG_YR] = bin2bcd(tm->tm_year - 100);
465 regs[ISL1208_REG_DW] = bin2bcd(tm->tm_wday & 7);
467 sr = isl1208_i2c_get_sr(client);
469 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
474 sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
475 sr | ISL1208_REG_SR_WRTC);
477 dev_err(&client->dev, "%s: writing SR failed\n", __func__);
481 /* write RTC registers */
482 sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
484 dev_err(&client->dev, "%s: writing RTC section failed\n",
489 /* clear WRTC again */
490 sr = isl1208_i2c_get_sr(client);
492 dev_err(&client->dev, "%s: reading SR failed\n", __func__);
495 sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
496 sr & ~ISL1208_REG_SR_WRTC);
498 dev_err(&client->dev, "%s: writing SR failed\n", __func__);
507 isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
509 return isl1208_i2c_set_time(to_i2c_client(dev), tm);
513 isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
515 return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
519 isl1208_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
521 return isl1208_i2c_set_alarm(to_i2c_client(dev), alarm);
524 static ssize_t timestamp0_store(struct device *dev,
525 struct device_attribute *attr,
526 const char *buf, size_t count)
528 struct i2c_client *client = to_i2c_client(dev->parent);
531 sr = isl1208_i2c_get_sr(client);
533 dev_err(dev, "%s: reading SR failed\n", __func__);
537 sr &= ~ISL1208_REG_SR_EVT;
539 sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
541 dev_err(dev, "%s: writing SR failed\n",
547 static ssize_t timestamp0_show(struct device *dev,
548 struct device_attribute *attr, char *buf)
550 struct i2c_client *client = to_i2c_client(dev->parent);
551 u8 regs[ISL1219_EVT_SECTION_LEN] = { 0, };
555 sr = isl1208_i2c_get_sr(client);
557 dev_err(dev, "%s: reading SR failed\n", __func__);
561 if (!(sr & ISL1208_REG_SR_EVT))
564 sr = isl1208_i2c_read_regs(client, ISL1219_REG_SCT, regs,
565 ISL1219_EVT_SECTION_LEN);
567 dev_err(dev, "%s: reading event section failed\n",
572 /* MSB of each alarm register is an enable bit */
573 tm.tm_sec = bcd2bin(regs[ISL1219_REG_SCT - ISL1219_REG_SCT] & 0x7f);
574 tm.tm_min = bcd2bin(regs[ISL1219_REG_MNT - ISL1219_REG_SCT] & 0x7f);
575 tm.tm_hour = bcd2bin(regs[ISL1219_REG_HRT - ISL1219_REG_SCT] & 0x3f);
576 tm.tm_mday = bcd2bin(regs[ISL1219_REG_DTT - ISL1219_REG_SCT] & 0x3f);
578 bcd2bin(regs[ISL1219_REG_MOT - ISL1219_REG_SCT] & 0x1f) - 1;
579 tm.tm_year = bcd2bin(regs[ISL1219_REG_YRT - ISL1219_REG_SCT]) + 100;
581 sr = rtc_valid_tm(&tm);
585 return sprintf(buf, "%llu\n",
586 (unsigned long long)rtc_tm_to_time64(&tm));
589 static DEVICE_ATTR_RW(timestamp0);
592 isl1208_rtc_interrupt(int irq, void *data)
594 unsigned long timeout = jiffies + msecs_to_jiffies(1000);
595 struct i2c_client *client = data;
596 struct isl1208_state *isl1208 = i2c_get_clientdata(client);
597 int handled = 0, sr, err;
600 * I2C reads get NAK'ed if we read straight away after an interrupt?
601 * Using a mdelay/msleep didn't seem to help either, so we work around
602 * this by continually trying to read the register for a short time.
605 sr = isl1208_i2c_get_sr(client);
609 if (time_after(jiffies, timeout)) {
610 dev_err(&client->dev, "%s: reading SR failed\n",
616 if (sr & ISL1208_REG_SR_ALM) {
617 dev_dbg(&client->dev, "alarm!\n");
619 rtc_update_irq(isl1208->rtc, 1, RTC_IRQF | RTC_AF);
621 /* Clear the alarm */
622 sr &= ~ISL1208_REG_SR_ALM;
623 sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
625 dev_err(&client->dev, "%s: writing SR failed\n",
630 /* Disable the alarm */
631 err = isl1208_rtc_toggle_alarm(client, 0);
636 if (isl1208->config->has_tamper && (sr & ISL1208_REG_SR_EVT)) {
637 dev_warn(&client->dev, "event detected");
639 if (isl1208->config->has_timestamp)
640 sysfs_notify(&isl1208->rtc->dev.kobj, NULL,
641 dev_attr_timestamp0.attr.name);
644 return handled ? IRQ_HANDLED : IRQ_NONE;
647 static const struct rtc_class_ops isl1208_rtc_ops = {
648 .proc = isl1208_rtc_proc,
649 .read_time = isl1208_rtc_read_time,
650 .set_time = isl1208_rtc_set_time,
651 .read_alarm = isl1208_rtc_read_alarm,
652 .set_alarm = isl1208_rtc_set_alarm,
655 /* sysfs interface */
658 isl1208_sysfs_show_atrim(struct device *dev,
659 struct device_attribute *attr, char *buf)
661 int atr = isl1208_i2c_get_atr(to_i2c_client(dev->parent));
665 return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
668 static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
671 isl1208_sysfs_show_dtrim(struct device *dev,
672 struct device_attribute *attr, char *buf)
674 int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev->parent));
678 return sprintf(buf, "%d ppm\n", dtr - 100);
681 static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
684 isl1208_sysfs_show_usr(struct device *dev,
685 struct device_attribute *attr, char *buf)
687 int usr = isl1208_i2c_get_usr(to_i2c_client(dev->parent));
691 return sprintf(buf, "0x%.4x\n", usr);
695 isl1208_sysfs_store_usr(struct device *dev,
696 struct device_attribute *attr,
697 const char *buf, size_t count)
701 if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
702 if (sscanf(buf, "%x", &usr) != 1)
705 if (sscanf(buf, "%d", &usr) != 1)
709 if (usr < 0 || usr > 0xffff)
712 if (isl1208_i2c_set_usr(to_i2c_client(dev->parent), usr))
718 static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
719 isl1208_sysfs_store_usr);
721 static struct attribute *isl1208_rtc_attrs[] = {
722 &dev_attr_atrim.attr,
723 &dev_attr_dtrim.attr,
728 static const struct attribute_group isl1208_rtc_sysfs_files = {
729 .attrs = isl1208_rtc_attrs,
732 static struct attribute *isl1219_rtc_attrs[] = {
733 &dev_attr_timestamp0.attr,
737 static const struct attribute_group isl1219_rtc_sysfs_files = {
738 .attrs = isl1219_rtc_attrs,
741 static int isl1208_nvmem_read(void *priv, unsigned int off, void *buf,
744 struct isl1208_state *isl1208 = priv;
745 struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
748 /* nvmem sanitizes offset/count for us, but count==0 is possible */
751 ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1 + off, buf,
753 return ret == 0 ? count : ret;
756 static int isl1208_nvmem_write(void *priv, unsigned int off, void *buf,
759 struct isl1208_state *isl1208 = priv;
760 struct i2c_client *client = to_i2c_client(isl1208->rtc->dev.parent);
763 /* nvmem sanitizes off/count for us, but count==0 is possible */
766 ret = isl1208_i2c_set_regs(client, ISL1208_REG_USR1 + off, buf,
769 return ret == 0 ? count : ret;
772 static const struct nvmem_config isl1208_nvmem_config = {
773 .name = "isl1208_nvram",
776 /* .size from chip specific config */
777 .reg_read = isl1208_nvmem_read,
778 .reg_write = isl1208_nvmem_write,
781 static int isl1208_setup_irq(struct i2c_client *client, int irq)
783 int rc = devm_request_threaded_irq(&client->dev, irq, NULL,
784 isl1208_rtc_interrupt,
785 IRQF_SHARED | IRQF_ONESHOT,
786 isl1208_driver.driver.name,
789 device_init_wakeup(&client->dev, 1);
790 enable_irq_wake(irq);
792 dev_err(&client->dev,
793 "Unable to request irq %d, no alarm support\n",
800 isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
803 struct isl1208_state *isl1208;
806 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
809 if (isl1208_i2c_validate_client(client) < 0)
812 /* Allocate driver state, point i2c client data to it */
813 isl1208 = devm_kzalloc(&client->dev, sizeof(*isl1208), GFP_KERNEL);
816 i2c_set_clientdata(client, isl1208);
818 /* Determine which chip we have */
819 if (client->dev.of_node) {
820 isl1208->config = of_device_get_match_data(&client->dev);
821 if (!isl1208->config)
824 if (id->driver_data >= ISL_LAST_ID)
826 isl1208->config = &isl1208_configs[id->driver_data];
829 isl1208->rtc = devm_rtc_allocate_device(&client->dev);
830 if (IS_ERR(isl1208->rtc))
831 return PTR_ERR(isl1208->rtc);
833 isl1208->rtc->ops = &isl1208_rtc_ops;
835 /* Setup nvmem configuration in driver state struct */
836 isl1208->nvmem_config = isl1208_nvmem_config;
837 isl1208->nvmem_config.size = isl1208->config->nvmem_length;
838 isl1208->nvmem_config.priv = isl1208;
840 rc = isl1208_i2c_get_sr(client);
842 dev_err(&client->dev, "reading status failed\n");
846 if (rc & ISL1208_REG_SR_RTCF)
847 dev_warn(&client->dev, "rtc power failure detected, "
848 "please set clock.\n");
850 if (isl1208->config->has_tamper) {
851 struct device_node *np = client->dev.of_node;
854 rc = i2c_smbus_read_byte_data(client, ISL1219_REG_EV);
856 dev_err(&client->dev, "failed to read EV reg\n");
859 rc |= ISL1219_REG_EV_EVEN;
860 if (!of_property_read_u32(np, "isil,ev-evienb", &evienb)) {
862 rc |= ISL1219_REG_EV_EVIENB;
864 rc &= ~ISL1219_REG_EV_EVIENB;
866 rc = i2c_smbus_write_byte_data(client, ISL1219_REG_EV, rc);
868 dev_err(&client->dev, "could not enable tamper detection\n");
871 evdet_irq = of_irq_get_byname(np, "evdet");
873 if (isl1208->config->has_timestamp) {
874 rc = rtc_add_group(isl1208->rtc, &isl1219_rtc_sysfs_files);
879 rc = rtc_add_group(isl1208->rtc, &isl1208_rtc_sysfs_files);
884 rc = isl1208_setup_irq(client, client->irq);
888 if (evdet_irq > 0 && evdet_irq != client->irq)
889 rc = isl1208_setup_irq(client, evdet_irq);
893 rc = devm_rtc_nvmem_register(isl1208->rtc, &isl1208->nvmem_config);
897 return devm_rtc_register_device(isl1208->rtc);
900 static struct i2c_driver isl1208_driver = {
902 .name = "rtc-isl1208",
903 .of_match_table = of_match_ptr(isl1208_of_match),
905 .probe = isl1208_probe,
906 .id_table = isl1208_id,
909 module_i2c_driver(isl1208_driver);
911 MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
912 MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
913 MODULE_LICENSE("GPL");