1 // SPDX-License-Identifier: GPL-2.0-only
3 * Remote processor machine-specific module for DA8XX
5 * Copyright (C) 2013 Texas Instruments, Inc.
8 #include <linux/bitops.h>
10 #include <linux/reset.h>
11 #include <linux/err.h>
12 #include <linux/interrupt.h>
14 #include <linux/irq.h>
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/of_reserved_mem.h>
18 #include <linux/platform_device.h>
19 #include <linux/remoteproc.h>
21 #include "remoteproc_internal.h"
23 static char *da8xx_fw_name;
24 module_param(da8xx_fw_name, charp, 0444);
25 MODULE_PARM_DESC(da8xx_fw_name,
26 "Name of DSP firmware file in /lib/firmware (if not specified defaults to 'rproc-dsp-fw')");
29 * OMAP-L138 Technical References:
30 * http://www.ti.com/product/omap-l138
32 #define SYSCFG_CHIPSIG0 BIT(0)
33 #define SYSCFG_CHIPSIG1 BIT(1)
34 #define SYSCFG_CHIPSIG2 BIT(2)
35 #define SYSCFG_CHIPSIG3 BIT(3)
36 #define SYSCFG_CHIPSIG4 BIT(4)
38 #define DA8XX_RPROC_LOCAL_ADDRESS_MASK (SZ_16M - 1)
41 * struct da8xx_rproc_mem - internal memory structure
42 * @cpu_addr: MPU virtual address of the memory region
43 * @bus_addr: Bus address used to access the memory region
44 * @dev_addr: Device address of the memory region from DSP view
45 * @size: Size of the memory region
47 struct da8xx_rproc_mem {
48 void __iomem *cpu_addr;
55 * struct da8xx_rproc - da8xx remote processor instance state
56 * @rproc: rproc handle
57 * @mem: internal memory regions data
58 * @num_mems: number of internal memory regions
59 * @dsp_clk: placeholder for platform's DSP clk
60 * @ack_fxn: chip-specific ack function for ack'ing irq
61 * @irq_data: ack_fxn function parameter
62 * @chipsig: virt ptr to DSP interrupt registers (CHIPSIG & CHIPSIG_CLR)
63 * @bootreg: virt ptr to DSP boot address register (HOST1CFG)
64 * @irq: irq # used by this instance
68 struct da8xx_rproc_mem *mem;
71 struct reset_control *dsp_reset;
72 void (*ack_fxn)(struct irq_data *data);
73 struct irq_data *irq_data;
74 void __iomem *chipsig;
75 void __iomem *bootreg;
80 * handle_event() - inbound virtqueue message workqueue function
82 * This function is registered as a kernel thread and is scheduled by the
85 static irqreturn_t handle_event(int irq, void *p)
87 struct rproc *rproc = p;
89 /* Process incoming buffers on all our vrings */
90 rproc_vq_interrupt(rproc, 0);
91 rproc_vq_interrupt(rproc, 1);
97 * da8xx_rproc_callback() - inbound virtqueue message handler
99 * This handler is invoked directly by the kernel whenever the remote
100 * core (DSP) has modified the state of a virtqueue. There is no
101 * "payload" message indicating the virtqueue index as is the case with
102 * mailbox-based implementations on OMAP4. As such, this handler "polls"
103 * each known virtqueue index for every invocation.
105 static irqreturn_t da8xx_rproc_callback(int irq, void *p)
107 struct rproc *rproc = p;
108 struct da8xx_rproc *drproc = rproc->priv;
111 chipsig = readl(drproc->chipsig);
112 if (chipsig & SYSCFG_CHIPSIG0) {
113 /* Clear interrupt level source */
114 writel(SYSCFG_CHIPSIG0, drproc->chipsig + 4);
119 * It has already been ack'ed by the kernel before calling
120 * this function, but since the ARM<->DSP interrupts in the
121 * CHIPSIG register are "level" instead of "pulse" variety,
122 * we need to ack it after taking down the level else we'll
123 * be called again immediately after returning.
125 drproc->ack_fxn(drproc->irq_data);
127 return IRQ_WAKE_THREAD;
133 static int da8xx_rproc_start(struct rproc *rproc)
135 struct device *dev = rproc->dev.parent;
136 struct da8xx_rproc *drproc = rproc->priv;
137 struct clk *dsp_clk = drproc->dsp_clk;
138 struct reset_control *dsp_reset = drproc->dsp_reset;
141 /* hw requires the start (boot) address be on 1KB boundary */
142 if (rproc->bootaddr & 0x3ff) {
143 dev_err(dev, "invalid boot address: must be aligned to 1KB\n");
148 writel(rproc->bootaddr, drproc->bootreg);
150 ret = clk_prepare_enable(dsp_clk);
152 dev_err(dev, "clk_prepare_enable() failed: %d\n", ret);
156 ret = reset_control_deassert(dsp_reset);
158 dev_err(dev, "reset_control_deassert() failed: %d\n", ret);
159 clk_disable_unprepare(dsp_clk);
166 static int da8xx_rproc_stop(struct rproc *rproc)
168 struct da8xx_rproc *drproc = rproc->priv;
169 struct device *dev = rproc->dev.parent;
172 ret = reset_control_assert(drproc->dsp_reset);
174 dev_err(dev, "reset_control_assert() failed: %d\n", ret);
178 clk_disable_unprepare(drproc->dsp_clk);
183 /* kick a virtqueue */
184 static void da8xx_rproc_kick(struct rproc *rproc, int vqid)
186 struct da8xx_rproc *drproc = rproc->priv;
188 /* Interrupt remote proc */
189 writel(SYSCFG_CHIPSIG2, drproc->chipsig);
192 static const struct rproc_ops da8xx_rproc_ops = {
193 .start = da8xx_rproc_start,
194 .stop = da8xx_rproc_stop,
195 .kick = da8xx_rproc_kick,
198 static int da8xx_rproc_get_internal_memories(struct platform_device *pdev,
199 struct da8xx_rproc *drproc)
201 static const char * const mem_names[] = {"l2sram", "l1pram", "l1dram"};
202 int num_mems = ARRAY_SIZE(mem_names);
203 struct device *dev = &pdev->dev;
204 struct resource *res;
207 drproc->mem = devm_kcalloc(dev, num_mems, sizeof(*drproc->mem),
212 for (i = 0; i < num_mems; i++) {
213 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
215 drproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
216 if (IS_ERR(drproc->mem[i].cpu_addr)) {
217 dev_err(dev, "failed to parse and map %s memory\n",
219 return PTR_ERR(drproc->mem[i].cpu_addr);
221 drproc->mem[i].bus_addr = res->start;
222 drproc->mem[i].dev_addr =
223 res->start & DA8XX_RPROC_LOCAL_ADDRESS_MASK;
224 drproc->mem[i].size = resource_size(res);
226 dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %p da 0x%x\n",
227 mem_names[i], &drproc->mem[i].bus_addr,
228 drproc->mem[i].size, drproc->mem[i].cpu_addr,
229 drproc->mem[i].dev_addr);
231 drproc->num_mems = num_mems;
236 static int da8xx_rproc_probe(struct platform_device *pdev)
238 struct device *dev = &pdev->dev;
239 struct da8xx_rproc *drproc;
241 struct irq_data *irq_data;
242 struct resource *bootreg_res;
243 struct resource *chipsig_res;
245 struct reset_control *dsp_reset;
246 void __iomem *chipsig;
247 void __iomem *bootreg;
251 irq = platform_get_irq(pdev, 0);
255 irq_data = irq_get_irq_data(irq);
257 dev_err(dev, "irq_get_irq_data(%d): NULL\n", irq);
261 bootreg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
263 bootreg = devm_ioremap_resource(dev, bootreg_res);
265 return PTR_ERR(bootreg);
267 chipsig_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
269 chipsig = devm_ioremap_resource(dev, chipsig_res);
271 return PTR_ERR(chipsig);
273 dsp_clk = devm_clk_get(dev, NULL);
274 if (IS_ERR(dsp_clk)) {
275 dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk));
277 return PTR_ERR(dsp_clk);
280 dsp_reset = devm_reset_control_get_exclusive(dev, NULL);
281 if (IS_ERR(dsp_reset)) {
282 if (PTR_ERR(dsp_reset) != -EPROBE_DEFER)
283 dev_err(dev, "unable to get reset control: %ld\n",
286 return PTR_ERR(dsp_reset);
290 ret = of_reserved_mem_device_init(dev);
292 dev_err(dev, "device does not have specific CMA pool: %d\n",
298 rproc = rproc_alloc(dev, "dsp", &da8xx_rproc_ops, da8xx_fw_name,
305 /* error recovery is not supported at present */
306 rproc->recovery_disabled = true;
308 drproc = rproc->priv;
309 drproc->rproc = rproc;
310 drproc->dsp_clk = dsp_clk;
311 drproc->dsp_reset = dsp_reset;
312 rproc->has_iommu = false;
314 ret = da8xx_rproc_get_internal_memories(pdev, drproc);
318 platform_set_drvdata(pdev, rproc);
320 /* everything the ISR needs is now setup, so hook it up */
321 ret = devm_request_threaded_irq(dev, irq, da8xx_rproc_callback,
322 handle_event, 0, "da8xx-remoteproc",
325 dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
330 * rproc_add() can end up enabling the DSP's clk with the DSP
331 * *not* in reset, but da8xx_rproc_start() needs the DSP to be
332 * held in reset at the time it is called.
334 ret = reset_control_assert(dsp_reset);
338 drproc->chipsig = chipsig;
339 drproc->bootreg = bootreg;
340 drproc->ack_fxn = irq_data->chip->irq_ack;
341 drproc->irq_data = irq_data;
344 ret = rproc_add(rproc);
346 dev_err(dev, "rproc_add failed: %d\n", ret);
356 of_reserved_mem_device_release(dev);
360 static void da8xx_rproc_remove(struct platform_device *pdev)
362 struct rproc *rproc = platform_get_drvdata(pdev);
363 struct da8xx_rproc *drproc = rproc->priv;
364 struct device *dev = &pdev->dev;
367 * The devm subsystem might end up releasing things before
368 * freeing the irq, thus allowing an interrupt to sneak in while
369 * the device is being removed. This should prevent that.
371 disable_irq(drproc->irq);
376 of_reserved_mem_device_release(dev);
379 static const struct of_device_id davinci_rproc_of_match[] __maybe_unused = {
380 { .compatible = "ti,da850-dsp", },
383 MODULE_DEVICE_TABLE(of, davinci_rproc_of_match);
385 static struct platform_driver da8xx_rproc_driver = {
386 .probe = da8xx_rproc_probe,
387 .remove_new = da8xx_rproc_remove,
389 .name = "davinci-rproc",
390 .of_match_table = of_match_ptr(davinci_rproc_of_match),
394 module_platform_driver(da8xx_rproc_driver);
396 MODULE_LICENSE("GPL v2");
397 MODULE_DESCRIPTION("DA8XX Remote Processor control driver");