drivers/regulator/wm831x-dcdc.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // wm831x-dcdc.c  --  DC-DC buck converter driver for the WM831x series
   4 //
   5 // Copyright 2009 Wolfson Microelectronics PLC.
   6 //
   7 // Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
   8
   9 #include <linux/module.h>
  10 #include <linux/moduleparam.h>
  11 #include <linux/init.h>
  12 #include <linux/bitops.h>
  13 #include <linux/err.h>
  14 #include <linux/i2c.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/regulator/driver.h>
  17 #include <linux/regulator/machine.h>
  18 #include <linux/gpio/consumer.h>
  19 #include <linux/slab.h>
  20
  21 #include <linux/mfd/wm831x/core.h>
  22 #include <linux/mfd/wm831x/regulator.h>
  23 #include <linux/mfd/wm831x/pdata.h>
  24
  25 #define WM831X_BUCKV_MAX_SELECTOR 0x68
  26 #define WM831X_BUCKP_MAX_SELECTOR 0x66
  27
  28 #define WM831X_DCDC_MODE_FAST    0
  29 #define WM831X_DCDC_MODE_NORMAL  1
  30 #define WM831X_DCDC_MODE_IDLE    2
  31 #define WM831X_DCDC_MODE_STANDBY 3
  32
  33 #define WM831X_DCDC_MAX_NAME 9
  34
  35 /* Register offsets in control block */
  36 #define WM831X_DCDC_CONTROL_1     0
  37 #define WM831X_DCDC_CONTROL_2     1
  38 #define WM831X_DCDC_ON_CONFIG     2
  39 #define WM831X_DCDC_SLEEP_CONTROL 3
  40 #define WM831X_DCDC_DVS_CONTROL   4
  41
  42 /*
  43  * Shared
  44  */
  45
  46 struct wm831x_dcdc {
  47         char name[WM831X_DCDC_MAX_NAME];
  48         char supply_name[WM831X_DCDC_MAX_NAME];
  49         struct regulator_desc desc;
  50         int base;
  51         struct wm831x *wm831x;
  52         struct regulator_dev *regulator;
  53         struct gpio_desc *dvs_gpiod;
  54         int dvs_gpio_state;
  55         int on_vsel;
  56         int dvs_vsel;
  57 };
  58
  59 static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev)
  60
  61 {
  62         struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
  63         struct wm831x *wm831x = dcdc->wm831x;
  64         u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
  65         int val;
  66
  67         val = wm831x_reg_read(wm831x, reg);
  68         if (val < 0)
  69                 return val;
  70
  71         val = (val & WM831X_DC1_ON_MODE_MASK) >> WM831X_DC1_ON_MODE_SHIFT;
  72
  73         switch (val) {
  74         case WM831X_DCDC_MODE_FAST:
  75                 return REGULATOR_MODE_FAST;
  76         case WM831X_DCDC_MODE_NORMAL:
  77                 return REGULATOR_MODE_NORMAL;
  78         case WM831X_DCDC_MODE_STANDBY:
  79                 return REGULATOR_MODE_STANDBY;
  80         case WM831X_DCDC_MODE_IDLE:
  81                 return REGULATOR_MODE_IDLE;
  82         default:
  83                 BUG();
  84                 return -EINVAL;
  85         }
  86 }
  87
  88 static int wm831x_dcdc_set_mode_int(struct wm831x *wm831x, int reg,
  89                                     unsigned int mode)
  90 {
  91         int val;
  92
  93         switch (mode) {
  94         case REGULATOR_MODE_FAST:
  95                 val = WM831X_DCDC_MODE_FAST;
  96                 break;
  97         case REGULATOR_MODE_NORMAL:
  98                 val = WM831X_DCDC_MODE_NORMAL;
  99                 break;
 100         case REGULATOR_MODE_STANDBY:
 101                 val = WM831X_DCDC_MODE_STANDBY;
 102                 break;
 103         case REGULATOR_MODE_IDLE:
 104                 val = WM831X_DCDC_MODE_IDLE;
 105                 break;
 106         default:
 107                 return -EINVAL;
 108         }
 109
 110         return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_MODE_MASK,
 111                                val << WM831X_DC1_ON_MODE_SHIFT);
 112 }
 113
 114 static int wm831x_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode)
 115 {
 116         struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
 117         struct wm831x *wm831x = dcdc->wm831x;
 118         u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
 119
 120         return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
 121 }
 122
 123 static int wm831x_dcdc_set_suspend_mode(struct regulator_dev *rdev,
 124                                         unsigned int mode)
 125 {
 126         struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
 127         struct wm831x *wm831x = dcdc->wm831x;
 128         u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
 129
 130         return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
 131 }
 132
 133 static int wm831x_dcdc_get_status(struct regulator_dev *rdev)
 134 {
 135         struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
 136         struct wm831x *wm831x = dcdc->wm831x;
 137         int ret;
 138
 139         /* First, check for errors */
 140         ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
 141         if (ret < 0)
 142                 return ret;
 143
 144         if (ret & (1 << rdev_get_id(rdev))) {
 145                 dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
 146                         rdev_get_id(rdev) + 1);
 147                 return REGULATOR_STATUS_ERROR;
 148         }
 149
 150         /* DCDC1 and DCDC2 can additionally detect high voltage/current */
 151         if (rdev_get_id(rdev) < 2) {
 152                 if (ret & (WM831X_DC1_OV_STS << rdev_get_id(rdev))) {
 153                         dev_dbg(wm831x->dev, "DCDC%d over voltage\n",
 154                                 rdev_get_id(rdev) + 1);
 155                         return REGULATOR_STATUS_ERROR;
 156                 }
 157
 158                 if (ret & (WM831X_DC1_HC_STS << rdev_get_id(rdev))) {
 159                         dev_dbg(wm831x->dev, "DCDC%d over current\n",
 160                                 rdev_get_id(rdev) + 1);
 161                         return REGULATOR_STATUS_ERROR;
 162                 }
 163         }
 164
 165         /* Is the regulator on? */
 166         ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
 167         if (ret < 0)
 168                 return ret;
 169         if (!(ret & (1 << rdev_get_id(rdev))))
 170                 return REGULATOR_STATUS_OFF;
 171
 172         /* TODO: When we handle hardware control modes so we can report the
 173          * current mode. */
 174         return REGULATOR_STATUS_ON;
 175 }
 176
 177 static irqreturn_t wm831x_dcdc_uv_irq(int irq, void *data)
 178 {
 179         struct wm831x_dcdc *dcdc = data;
 180
 181         regulator_notifier_call_chain(dcdc->regulator,
 182                                       REGULATOR_EVENT_UNDER_VOLTAGE,
 183                                       NULL);
 184
 185         return IRQ_HANDLED;
 186 }
 187
 188 static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
 189 {
 190         struct wm831x_dcdc *dcdc = data;
 191
 192         regulator_notifier_call_chain(dcdc->regulator,
 193                                       REGULATOR_EVENT_OVER_CURRENT,
 194                                       NULL);
 195
 196         return IRQ_HANDLED;
 197 }
 198
 199 /*
 200  * BUCKV specifics
 201  */
 202
 203 static const struct linear_range wm831x_buckv_ranges[] = {
 204         REGULATOR_LINEAR_RANGE(600000, 0, 0x7, 0),
 205         REGULATOR_LINEAR_RANGE(600000, 0x8, 0x68, 12500),
 206 };
 207
 208 static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state)
 209 {
 210         struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
 211
 212         if (state == dcdc->dvs_gpio_state)
 213                 return 0;
 214
 215         dcdc->dvs_gpio_state = state;
 216         gpiod_set_value(dcdc->dvs_gpiod, state);
 217
 218         /* Should wait for DVS state change to be asserted if we have
 219          * a GPIO for it, for now assume the device is configured
 220          * for the fastest possible transition.
 221          */
 222
 223         return 0;
 224 }
 225
 226 static int wm831x_buckv_set_voltage_sel(struct regulator_dev *rdev,
 227                                         unsigned vsel)
 228 {
 229         struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
 230         struct wm831x *wm831x = dcdc->wm831x;
 231         int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
 232         int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL;
 233         int ret;
 234
 235         /* If this value is already set then do a GPIO update if we can */
 236         if (dcdc->dvs_gpiod && dcdc->on_vsel == vsel)
 237                 return wm831x_buckv_set_dvs(rdev, 0);
 238
 239         if (dcdc->dvs_gpiod && dcdc->dvs_vsel == vsel)
 240                 return wm831x_buckv_set_dvs(rdev, 1);
 241
 242         /* Always set the ON status to the minimum voltage */
 243         ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel);
 244         if (ret < 0)
 245                 return ret;
 246         dcdc->on_vsel = vsel;
 247
 248         if (!dcdc->dvs_gpiod)
 249                 return ret;
 250
 251         /* Kick the voltage transition now */
 252         ret = wm831x_buckv_set_dvs(rdev, 0);
 253         if (ret < 0)
 254                 return ret;
 255
 256         /*
 257          * If this VSEL is higher than the last one we've seen then
 258          * remember it as the DVS VSEL.  This is optimised for CPUfreq
 259          * usage where we want to get to the highest voltage very
 260          * quickly.
 261          */
 262         if (vsel > dcdc->dvs_vsel) {
 263                 ret = wm831x_set_bits(wm831x, dvs_reg,
 264                                       WM831X_DC1_DVS_VSEL_MASK,
 265                                       vsel);
 266                 if (ret == 0)
 267                         dcdc->dvs_vsel = vsel;
 268                 else
 269                         dev_warn(wm831x->dev,
 270                                  "Failed to set DCDC DVS VSEL: %d\n", ret);
 271         }
 272
 273         return 0;
 274 }
 275
 276 static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
 277                                             int uV)
 278 {
 279         struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
 280         struct wm831x *wm831x = dcdc->wm831x;
 281         u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
 282         int vsel;
 283
 284         vsel = regulator_map_voltage_linear_range(rdev, uV, uV);
 285         if (vsel < 0)
 286                 return vsel;
 287
 288         return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel);
 289 }
 290
 291 static int wm831x_buckv_get_voltage_sel(struct regulator_dev *rdev)
 292 {
 293         struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
 294
 295         if (dcdc->dvs_gpiod && dcdc->dvs_gpio_state)
 296                 return dcdc->dvs_vsel;
 297         else
 298                 return dcdc->on_vsel;
 299 }
 300
 301 /* Current limit options */
 302 static const unsigned int wm831x_dcdc_ilim[] = {
 303         125000, 250000, 375000, 500000, 625000, 750000, 875000, 1000000
 304 };
 305
 306 static const struct regulator_ops wm831x_buckv_ops = {
 307         .set_voltage_sel = wm831x_buckv_set_voltage_sel,
 308         .get_voltage_sel = wm831x_buckv_get_voltage_sel,
 309         .list_voltage = regulator_list_voltage_linear_range,
 310         .map_voltage = regulator_map_voltage_linear_range,
 311         .set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
 312         .set_current_limit = regulator_set_current_limit_regmap,
 313         .get_current_limit = regulator_get_current_limit_regmap,
 314
 315         .is_enabled = regulator_is_enabled_regmap,
 316         .enable = regulator_enable_regmap,
 317         .disable = regulator_disable_regmap,
 318         .get_status = wm831x_dcdc_get_status,
 319         .get_mode = wm831x_dcdc_get_mode,
 320         .set_mode = wm831x_dcdc_set_mode,
 321         .set_suspend_mode = wm831x_dcdc_set_suspend_mode,
 322 };
 323
 324 /*
 325  * Set up DVS control.  We just log errors since we can still run
 326  * (with reduced performance) if we fail.
 327  */
 328 static void wm831x_buckv_dvs_init(struct platform_device *pdev,
 329                                   struct wm831x_dcdc *dcdc,
 330                                   struct wm831x_buckv_pdata *pdata)
 331 {
 332         struct wm831x *wm831x = dcdc->wm831x;
 333         int ret;
 334         u16 ctrl;
 335
 336         if (!pdata)
 337                 return;
 338
 339         /* gpiolib won't let us read the GPIO status so pick the higher
 340          * of the two existing voltages so we take it as platform data.
 341          */
 342         dcdc->dvs_gpio_state = pdata->dvs_init_state;
 343
 344         dcdc->dvs_gpiod = devm_gpiod_get(&pdev->dev, "dvs",
 345                         dcdc->dvs_gpio_state ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
 346         if (IS_ERR(dcdc->dvs_gpiod)) {
 347                 dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %ld\n",
 348                         dcdc->name, PTR_ERR(dcdc->dvs_gpiod));
 349                 return;
 350         }
 351
 352         switch (pdata->dvs_control_src) {
 353         case 1:
 354                 ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT;
 355                 break;
 356         case 2:
 357                 ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT;
 358                 break;
 359         default:
 360                 dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n",
 361                         pdata->dvs_control_src, dcdc->name);
 362                 return;
 363         }
 364
 365         /* If DVS_VSEL is set to the minimum value then raise it to ON_VSEL
 366          * to make bootstrapping a bit smoother.
 367          */
 368         if (!dcdc->dvs_vsel) {
 369                 ret = wm831x_set_bits(wm831x,
 370                                       dcdc->base + WM831X_DCDC_DVS_CONTROL,
 371                                       WM831X_DC1_DVS_VSEL_MASK, dcdc->on_vsel);
 372                 if (ret == 0)
 373                         dcdc->dvs_vsel = dcdc->on_vsel;
 374                 else
 375                         dev_warn(wm831x->dev, "Failed to set DVS_VSEL: %d\n",
 376                                  ret);
 377         }
 378
 379         ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL,
 380                               WM831X_DC1_DVS_SRC_MASK, ctrl);
 381         if (ret < 0) {
 382                 dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n",
 383                         dcdc->name, ret);
 384         }
 385 }
 386
 387 static int wm831x_buckv_probe(struct platform_device *pdev)
 388 {
 389         struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 390         struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
 391         struct regulator_config config = { };
 392         int id;
 393         struct wm831x_dcdc *dcdc;
 394         struct resource *res;
 395         int ret, irq;
 396
 397         if (pdata && pdata->wm831x_num)
 398                 id = (pdata->wm831x_num * 10) + 1;
 399         else
 400                 id = 0;
 401         id = pdev->id - id;
 402
 403         dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
 404
 405         dcdc = devm_kzalloc(&pdev->dev,  sizeof(struct wm831x_dcdc),
 406                             GFP_KERNEL);
 407         if (!dcdc)
 408                 return -ENOMEM;
 409
 410         dcdc->wm831x = wm831x;
 411
 412         res = platform_get_resource(pdev, IORESOURCE_REG, 0);
 413         if (res == NULL) {
 414                 dev_err(&pdev->dev, "No REG resource\n");
 415                 ret = -EINVAL;
 416                 goto err;
 417         }
 418         dcdc->base = res->start;
 419
 420         snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
 421         dcdc->desc.name = dcdc->name;
 422
 423         snprintf(dcdc->supply_name, sizeof(dcdc->supply_name),
 424                  "DC%dVDD", id + 1);
 425         dcdc->desc.supply_name = dcdc->supply_name;
 426
 427         dcdc->desc.id = id;
 428         dcdc->desc.type = REGULATOR_VOLTAGE;
 429         dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
 430         dcdc->desc.linear_ranges = wm831x_buckv_ranges;
 431         dcdc->desc.n_linear_ranges = ARRAY_SIZE(wm831x_buckv_ranges);
 432         dcdc->desc.ops = &wm831x_buckv_ops;
 433         dcdc->desc.owner = THIS_MODULE;
 434         dcdc->desc.enable_reg = WM831X_DCDC_ENABLE;
 435         dcdc->desc.enable_mask = 1 << id;
 436         dcdc->desc.csel_reg = dcdc->base + WM831X_DCDC_CONTROL_2;
 437         dcdc->desc.csel_mask = WM831X_DC1_HC_THR_MASK;
 438         dcdc->desc.n_current_limits = ARRAY_SIZE(wm831x_dcdc_ilim);
 439         dcdc->desc.curr_table = wm831x_dcdc_ilim;
 440
 441         ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
 442         if (ret < 0) {
 443                 dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret);
 444                 goto err;
 445         }
 446         dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK;
 447
 448         ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL);
 449         if (ret < 0) {
 450                 dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret);
 451                 goto err;
 452         }
 453         dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK;
 454
 455         if (pdata && pdata->dcdc[id])
 456                 wm831x_buckv_dvs_init(pdev, dcdc,
 457                                       pdata->dcdc[id]->driver_data);
 458
 459         config.dev = pdev->dev.parent;
 460         if (pdata)
 461                 config.init_data = pdata->dcdc[id];
 462         config.driver_data = dcdc;
 463         config.regmap = wm831x->regmap;
 464
 465         dcdc->regulator = devm_regulator_register(&pdev->dev, &dcdc->desc,
 466                                                   &config);
 467         if (IS_ERR(dcdc->regulator)) {
 468                 ret = PTR_ERR(dcdc->regulator);
 469                 dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
 470                         id + 1, ret);
 471                 goto err;
 472         }
 473
 474         irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 475         ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 476                                         wm831x_dcdc_uv_irq,
 477                                         IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 478                                         dcdc->name, dcdc);
 479         if (ret != 0) {
 480                 dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 481                         irq, ret);
 482                 goto err;
 483         }
 484
 485         irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "HC"));
 486         ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 487                                         wm831x_dcdc_oc_irq,
 488                                         IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 489                                         dcdc->name, dcdc);
 490         if (ret != 0) {
 491                 dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n",
 492                         irq, ret);
 493                 goto err;
 494         }
 495
 496         platform_set_drvdata(pdev, dcdc);
 497
 498         return 0;
 499
 500 err:
 501         return ret;
 502 }
 503
 504 static struct platform_driver wm831x_buckv_driver = {
 505         .probe = wm831x_buckv_probe,
 506         .driver         = {
 507                 .name   = "wm831x-buckv",
 508         },
 509 };
 510
 511 /*
 512  * BUCKP specifics
 513  */
 514
 515 static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev, int uV)
 516 {
 517         struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
 518         struct wm831x *wm831x = dcdc->wm831x;
 519         u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
 520         int sel;
 521
 522         sel = regulator_map_voltage_linear(rdev, uV, uV);
 523         if (sel < 0)
 524                 return sel;
 525
 526         return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, sel);
 527 }
 528
 529 static const struct regulator_ops wm831x_buckp_ops = {
 530         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 531         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 532         .list_voltage = regulator_list_voltage_linear,
 533         .map_voltage = regulator_map_voltage_linear,
 534         .set_suspend_voltage = wm831x_buckp_set_suspend_voltage,
 535
 536         .is_enabled = regulator_is_enabled_regmap,
 537         .enable = regulator_enable_regmap,
 538         .disable = regulator_disable_regmap,
 539         .get_status = wm831x_dcdc_get_status,
 540         .get_mode = wm831x_dcdc_get_mode,
 541         .set_mode = wm831x_dcdc_set_mode,
 542         .set_suspend_mode = wm831x_dcdc_set_suspend_mode,
 543 };
 544
 545 static int wm831x_buckp_probe(struct platform_device *pdev)
 546 {
 547         struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 548         struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
 549         struct regulator_config config = { };
 550         int id;
 551         struct wm831x_dcdc *dcdc;
 552         struct resource *res;
 553         int ret, irq;
 554
 555         if (pdata && pdata->wm831x_num)
 556                 id = (pdata->wm831x_num * 10) + 1;
 557         else
 558                 id = 0;
 559         id = pdev->id - id;
 560
 561         dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
 562
 563         dcdc = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_dcdc),
 564                             GFP_KERNEL);
 565         if (!dcdc)
 566                 return -ENOMEM;
 567
 568         dcdc->wm831x = wm831x;
 569
 570         res = platform_get_resource(pdev, IORESOURCE_REG, 0);
 571         if (res == NULL) {
 572                 dev_err(&pdev->dev, "No REG resource\n");
 573                 ret = -EINVAL;
 574                 goto err;
 575         }
 576         dcdc->base = res->start;
 577
 578         snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
 579         dcdc->desc.name = dcdc->name;
 580
 581         snprintf(dcdc->supply_name, sizeof(dcdc->supply_name),
 582                  "DC%dVDD", id + 1);
 583         dcdc->desc.supply_name = dcdc->supply_name;
 584
 585         dcdc->desc.id = id;
 586         dcdc->desc.type = REGULATOR_VOLTAGE;
 587         dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1;
 588         dcdc->desc.ops = &wm831x_buckp_ops;
 589         dcdc->desc.owner = THIS_MODULE;
 590         dcdc->desc.vsel_reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
 591         dcdc->desc.vsel_mask = WM831X_DC3_ON_VSEL_MASK;
 592         dcdc->desc.enable_reg = WM831X_DCDC_ENABLE;
 593         dcdc->desc.enable_mask = 1 << id;
 594         dcdc->desc.min_uV = 850000;
 595         dcdc->desc.uV_step = 25000;
 596
 597         config.dev = pdev->dev.parent;
 598         if (pdata)
 599                 config.init_data = pdata->dcdc[id];
 600         config.driver_data = dcdc;
 601         config.regmap = wm831x->regmap;
 602
 603         dcdc->regulator = devm_regulator_register(&pdev->dev, &dcdc->desc,
 604                                                   &config);
 605         if (IS_ERR(dcdc->regulator)) {
 606                 ret = PTR_ERR(dcdc->regulator);
 607                 dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
 608                         id + 1, ret);
 609                 goto err;
 610         }
 611
 612         irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 613         ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 614                                         wm831x_dcdc_uv_irq,
 615                                         IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 616                                         dcdc->name, dcdc);
 617         if (ret != 0) {
 618                 dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 619                         irq, ret);
 620                 goto err;
 621         }
 622
 623         platform_set_drvdata(pdev, dcdc);
 624
 625         return 0;
 626
 627 err:
 628         return ret;
 629 }
 630
 631 static struct platform_driver wm831x_buckp_driver = {
 632         .probe = wm831x_buckp_probe,
 633         .driver         = {
 634                 .name   = "wm831x-buckp",
 635         },
 636 };
 637
 638 /*
 639  * DCDC boost convertors
 640  */
 641
 642 static int wm831x_boostp_get_status(struct regulator_dev *rdev)
 643 {
 644         struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
 645         struct wm831x *wm831x = dcdc->wm831x;
 646         int ret;
 647
 648         /* First, check for errors */
 649         ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
 650         if (ret < 0)
 651                 return ret;
 652
 653         if (ret & (1 << rdev_get_id(rdev))) {
 654                 dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
 655                         rdev_get_id(rdev) + 1);
 656                 return REGULATOR_STATUS_ERROR;
 657         }
 658
 659         /* Is the regulator on? */
 660         ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
 661         if (ret < 0)
 662                 return ret;
 663         if (ret & (1 << rdev_get_id(rdev)))
 664                 return REGULATOR_STATUS_ON;
 665         else
 666                 return REGULATOR_STATUS_OFF;
 667 }
 668
 669 static const struct regulator_ops wm831x_boostp_ops = {
 670         .get_status = wm831x_boostp_get_status,
 671
 672         .is_enabled = regulator_is_enabled_regmap,
 673         .enable = regulator_enable_regmap,
 674         .disable = regulator_disable_regmap,
 675 };
 676
 677 static int wm831x_boostp_probe(struct platform_device *pdev)
 678 {
 679         struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 680         struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
 681         struct regulator_config config = { };
 682         int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
 683         struct wm831x_dcdc *dcdc;
 684         struct resource *res;
 685         int ret, irq;
 686
 687         dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
 688
 689         if (pdata == NULL || pdata->dcdc[id] == NULL)
 690                 return -ENODEV;
 691
 692         dcdc = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_dcdc), GFP_KERNEL);
 693         if (!dcdc)
 694                 return -ENOMEM;
 695
 696         dcdc->wm831x = wm831x;
 697
 698         res = platform_get_resource(pdev, IORESOURCE_REG, 0);
 699         if (res == NULL) {
 700                 dev_err(&pdev->dev, "No REG resource\n");
 701                 return -EINVAL;
 702         }
 703         dcdc->base = res->start;
 704
 705         snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
 706         dcdc->desc.name = dcdc->name;
 707         dcdc->desc.id = id;
 708         dcdc->desc.type = REGULATOR_VOLTAGE;
 709         dcdc->desc.ops = &wm831x_boostp_ops;
 710         dcdc->desc.owner = THIS_MODULE;
 711         dcdc->desc.enable_reg = WM831X_DCDC_ENABLE;
 712         dcdc->desc.enable_mask = 1 << id;
 713
 714         config.dev = pdev->dev.parent;
 715         if (pdata)
 716                 config.init_data = pdata->dcdc[id];
 717         config.driver_data = dcdc;
 718         config.regmap = wm831x->regmap;
 719
 720         dcdc->regulator = devm_regulator_register(&pdev->dev, &dcdc->desc,
 721                                                   &config);
 722         if (IS_ERR(dcdc->regulator)) {
 723                 ret = PTR_ERR(dcdc->regulator);
 724                 dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
 725                         id + 1, ret);
 726                 return ret;
 727         }
 728
 729         irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 730         ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 731                                         wm831x_dcdc_uv_irq,
 732                                         IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 733                                         dcdc->name,
 734                                         dcdc);
 735         if (ret != 0) {
 736                 dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 737                         irq, ret);
 738                 return ret;
 739         }
 740
 741         platform_set_drvdata(pdev, dcdc);
 742
 743         return 0;
 744 }
 745
 746 static struct platform_driver wm831x_boostp_driver = {
 747         .probe = wm831x_boostp_probe,
 748         .driver         = {
 749                 .name   = "wm831x-boostp",
 750         },
 751 };
 752
 753 /*
 754  * External Power Enable
 755  *
 756  * These aren't actually DCDCs but look like them in hardware so share
 757  * code.
 758  */
 759
 760 #define WM831X_EPE_BASE 6
 761
 762 static const struct regulator_ops wm831x_epe_ops = {
 763         .is_enabled = regulator_is_enabled_regmap,
 764         .enable = regulator_enable_regmap,
 765         .disable = regulator_disable_regmap,
 766         .get_status = wm831x_dcdc_get_status,
 767 };
 768
 769 static int wm831x_epe_probe(struct platform_device *pdev)
 770 {
 771         struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 772         struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
 773         struct regulator_config config = { };
 774         int id = pdev->id % ARRAY_SIZE(pdata->epe);
 775         struct wm831x_dcdc *dcdc;
 776         int ret;
 777
 778         dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1);
 779
 780         dcdc = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_dcdc), GFP_KERNEL);
 781         if (!dcdc)
 782                 return -ENOMEM;
 783
 784         dcdc->wm831x = wm831x;
 785
 786         /* For current parts this is correct; probably need to revisit
 787          * in future.
 788          */
 789         snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1);
 790         dcdc->desc.name = dcdc->name;
 791         dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */
 792         dcdc->desc.ops = &wm831x_epe_ops;
 793         dcdc->desc.type = REGULATOR_VOLTAGE;
 794         dcdc->desc.owner = THIS_MODULE;
 795         dcdc->desc.enable_reg = WM831X_DCDC_ENABLE;
 796         dcdc->desc.enable_mask = 1 << dcdc->desc.id;
 797
 798         config.dev = pdev->dev.parent;
 799         if (pdata)
 800                 config.init_data = pdata->epe[id];
 801         config.driver_data = dcdc;
 802         config.regmap = wm831x->regmap;
 803
 804         dcdc->regulator = devm_regulator_register(&pdev->dev, &dcdc->desc,
 805                                                   &config);
 806         if (IS_ERR(dcdc->regulator)) {
 807                 ret = PTR_ERR(dcdc->regulator);
 808                 dev_err(wm831x->dev, "Failed to register EPE%d: %d\n",
 809                         id + 1, ret);
 810                 goto err;
 811         }
 812
 813         platform_set_drvdata(pdev, dcdc);
 814
 815         return 0;
 816
 817 err:
 818         return ret;
 819 }
 820
 821 static struct platform_driver wm831x_epe_driver = {
 822         .probe = wm831x_epe_probe,
 823         .driver         = {
 824                 .name   = "wm831x-epe",
 825         },
 826 };
 827
 828 static struct platform_driver * const drivers[] = {
 829         &wm831x_buckv_driver,
 830         &wm831x_buckp_driver,
 831         &wm831x_boostp_driver,
 832         &wm831x_epe_driver,
 833 };
 834
 835 static int __init wm831x_dcdc_init(void)
 836 {
 837         return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
 838 }
 839 subsys_initcall(wm831x_dcdc_init);
 840
 841 static void __exit wm831x_dcdc_exit(void)
 842 {
 843         platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
 844 }
 845 module_exit(wm831x_dcdc_exit);
 846
 847 /* Module information */
 848 MODULE_AUTHOR("Mark Brown");
 849 MODULE_DESCRIPTION("WM831x DC-DC convertor driver");
 850 MODULE_LICENSE("GPL");
 851 MODULE_ALIAS("platform:wm831x-buckv");
 852 MODULE_ALIAS("platform:wm831x-buckp");
 853 MODULE_ALIAS("platform:wm831x-boostp");
 854 MODULE_ALIAS("platform:wm831x-epe");