drivers/regulator/atc260x-regulator.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Regulator driver for ATC260x PMICs
   4 //
   5 // Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
   6 // Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
   7
   8 #include <linux/mfd/atc260x/core.h>
   9 #include <linux/module.h>
  10 #include <linux/of_device.h>
  11 #include <linux/regmap.h>
  12 #include <linux/regulator/driver.h>
  13
  14 struct atc260x_regulator_data {
  15         int voltage_time_dcdc;
  16         int voltage_time_ldo;
  17 };
  18
  19 static const struct linear_range atc2603c_dcdc_voltage_ranges[] = {
  20         REGULATOR_LINEAR_RANGE(1300000, 0, 13, 50000),
  21         REGULATOR_LINEAR_RANGE(1950000, 14, 15, 100000),
  22 };
  23
  24 static const struct linear_range atc2609a_dcdc_voltage_ranges[] = {
  25         REGULATOR_LINEAR_RANGE(600000, 0, 127, 6250),
  26         REGULATOR_LINEAR_RANGE(1400000, 128, 232, 25000),
  27 };
  28
  29 static const struct linear_range atc2609a_ldo_voltage_ranges0[] = {
  30         REGULATOR_LINEAR_RANGE(700000, 0, 15, 100000),
  31         REGULATOR_LINEAR_RANGE(2100000, 0, 12, 100000),
  32 };
  33
  34 static const struct linear_range atc2609a_ldo_voltage_ranges1[] = {
  35         REGULATOR_LINEAR_RANGE(850000, 0, 15, 100000),
  36         REGULATOR_LINEAR_RANGE(2100000, 0, 11, 100000),
  37 };
  38
  39 static const unsigned int atc260x_ldo_voltage_range_sel[] = {
  40         0x0, 0x20,
  41 };
  42
  43 static int atc260x_dcdc_set_voltage_time_sel(struct regulator_dev *rdev,
  44                                              unsigned int old_selector,
  45                                              unsigned int new_selector)
  46 {
  47         struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
  48
  49         if (new_selector > old_selector)
  50                 return data->voltage_time_dcdc;
  51
  52         return 0;
  53 }
  54
  55 static int atc260x_ldo_set_voltage_time_sel(struct regulator_dev *rdev,
  56                                             unsigned int old_selector,
  57                                             unsigned int new_selector)
  58 {
  59         struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
  60
  61         if (new_selector > old_selector)
  62                 return data->voltage_time_ldo;
  63
  64         return 0;
  65 }
  66
  67 static const struct regulator_ops atc260x_dcdc_ops = {
  68         .enable = regulator_enable_regmap,
  69         .disable = regulator_disable_regmap,
  70         .is_enabled = regulator_is_enabled_regmap,
  71         .list_voltage = regulator_list_voltage_linear,
  72         .set_voltage_sel = regulator_set_voltage_sel_regmap,
  73         .get_voltage_sel = regulator_get_voltage_sel_regmap,
  74         .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
  75 };
  76
  77 static const struct regulator_ops atc260x_ldo_ops = {
  78         .enable = regulator_enable_regmap,
  79         .disable = regulator_disable_regmap,
  80         .is_enabled = regulator_is_enabled_regmap,
  81         .list_voltage = regulator_list_voltage_linear,
  82         .set_voltage_sel = regulator_set_voltage_sel_regmap,
  83         .get_voltage_sel = regulator_get_voltage_sel_regmap,
  84         .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
  85 };
  86
  87 static const struct regulator_ops atc260x_ldo_bypass_ops = {
  88         .enable = regulator_enable_regmap,
  89         .disable = regulator_disable_regmap,
  90         .is_enabled = regulator_is_enabled_regmap,
  91         .list_voltage = regulator_list_voltage_linear,
  92         .set_voltage_sel = regulator_set_voltage_sel_regmap,
  93         .get_voltage_sel = regulator_get_voltage_sel_regmap,
  94         .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
  95         .set_bypass = regulator_set_bypass_regmap,
  96         .get_bypass = regulator_get_bypass_regmap,
  97 };
  98
  99 static const struct regulator_ops atc260x_ldo_bypass_discharge_ops = {
 100         .enable = regulator_enable_regmap,
 101         .disable = regulator_disable_regmap,
 102         .is_enabled = regulator_is_enabled_regmap,
 103         .list_voltage = regulator_list_voltage_linear,
 104         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 105         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 106         .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
 107         .set_bypass = regulator_set_bypass_regmap,
 108         .get_bypass = regulator_get_bypass_regmap,
 109         .set_active_discharge = regulator_set_active_discharge_regmap,
 110 };
 111
 112 static const struct regulator_ops atc260x_dcdc_range_ops = {
 113         .enable = regulator_enable_regmap,
 114         .disable = regulator_disable_regmap,
 115         .is_enabled = regulator_is_enabled_regmap,
 116         .list_voltage = regulator_list_voltage_linear_range,
 117         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 118         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 119         .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
 120 };
 121
 122 static const struct regulator_ops atc260x_ldo_range_pick_ops = {
 123         .enable = regulator_enable_regmap,
 124         .disable = regulator_disable_regmap,
 125         .is_enabled = regulator_is_enabled_regmap,
 126         .list_voltage = regulator_list_voltage_pickable_linear_range,
 127         .set_voltage_sel = regulator_set_voltage_sel_pickable_regmap,
 128         .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
 129         .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
 130 };
 131
 132 static const struct regulator_ops atc260x_dcdc_fixed_ops = {
 133         .list_voltage = regulator_list_voltage_linear,
 134         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 135         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 136         .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
 137 };
 138
 139 static const struct regulator_ops atc260x_ldo_fixed_ops = {
 140         .list_voltage = regulator_list_voltage_linear,
 141         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 142         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 143         .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
 144 };
 145
 146 static const struct regulator_ops atc260x_no_ops = {
 147 };
 148
 149 /*
 150  * Note LDO8 is not documented in datasheet (v2.4), but supported
 151  * in the vendor's driver implementation (xapp-le-kernel).
 152  */
 153 enum atc2603c_reg_ids {
 154         ATC2603C_ID_DCDC1,
 155         ATC2603C_ID_DCDC2,
 156         ATC2603C_ID_DCDC3,
 157         ATC2603C_ID_LDO1,
 158         ATC2603C_ID_LDO2,
 159         ATC2603C_ID_LDO3,
 160         ATC2603C_ID_LDO5,
 161         ATC2603C_ID_LDO6,
 162         ATC2603C_ID_LDO7,
 163         ATC2603C_ID_LDO8,
 164         ATC2603C_ID_LDO11,
 165         ATC2603C_ID_LDO12,
 166         ATC2603C_ID_SWITCHLDO1,
 167         ATC2603C_ID_MAX,
 168 };
 169
 170 #define atc2603c_reg_desc_dcdc(num, min, step, n_volt, vsel_h, vsel_l) { \
 171         .name = "DCDC"#num, \
 172         .supply_name = "dcdc"#num, \
 173         .of_match = of_match_ptr("dcdc"#num), \
 174         .regulators_node = of_match_ptr("regulators"), \
 175         .id = ATC2603C_ID_DCDC##num, \
 176         .ops = &atc260x_dcdc_ops, \
 177         .type = REGULATOR_VOLTAGE, \
 178         .min_uV = min, \
 179         .uV_step = step, \
 180         .n_voltages = n_volt, \
 181         .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
 182         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 183         .enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
 184         .enable_mask = BIT(15), \
 185         .enable_time = 800, \
 186         .owner = THIS_MODULE, \
 187 }
 188
 189 #define atc2603c_reg_desc_dcdc_range(num, vsel_h, vsel_l) { \
 190         .name = "DCDC"#num, \
 191         .supply_name = "dcdc"#num, \
 192         .of_match = of_match_ptr("dcdc"#num), \
 193         .regulators_node = of_match_ptr("regulators"), \
 194         .id = ATC2603C_ID_DCDC##num, \
 195         .ops = &atc260x_dcdc_range_ops, \
 196         .type = REGULATOR_VOLTAGE, \
 197         .n_voltages = 16, \
 198         .linear_ranges = atc2603c_dcdc_voltage_ranges, \
 199         .n_linear_ranges = ARRAY_SIZE(atc2603c_dcdc_voltage_ranges), \
 200         .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
 201         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 202         .enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
 203         .enable_mask = BIT(15), \
 204         .enable_time = 800, \
 205         .owner = THIS_MODULE, \
 206 }
 207
 208 #define atc2603c_reg_desc_dcdc_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
 209         .name = "DCDC"#num, \
 210         .supply_name = "dcdc"#num, \
 211         .of_match = of_match_ptr("dcdc"#num), \
 212         .regulators_node = of_match_ptr("regulators"), \
 213         .id = ATC2603C_ID_DCDC##num, \
 214         .ops = &atc260x_dcdc_fixed_ops, \
 215         .type = REGULATOR_VOLTAGE, \
 216         .min_uV = min, \
 217         .uV_step = step, \
 218         .n_voltages = n_volt, \
 219         .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
 220         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 221         .enable_time = 800, \
 222         .owner = THIS_MODULE, \
 223 }
 224
 225 #define atc2603c_reg_desc_ldo(num, min, step, n_volt, vsel_h, vsel_l) { \
 226         .name = "LDO"#num, \
 227         .supply_name = "ldo"#num, \
 228         .of_match = of_match_ptr("ldo"#num), \
 229         .regulators_node = of_match_ptr("regulators"), \
 230         .id = ATC2603C_ID_LDO##num, \
 231         .ops = &atc260x_ldo_ops, \
 232         .type = REGULATOR_VOLTAGE, \
 233         .min_uV = min, \
 234         .uV_step = step, \
 235         .n_voltages = n_volt, \
 236         .vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
 237         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 238         .enable_reg = ATC2603C_PMU_LDO##num##_CTL, \
 239         .enable_mask = BIT(0), \
 240         .enable_time = 2000, \
 241         .owner = THIS_MODULE, \
 242 }
 243
 244 #define atc2603c_reg_desc_ldo_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
 245         .name = "LDO"#num, \
 246         .supply_name = "ldo"#num, \
 247         .of_match = of_match_ptr("ldo"#num), \
 248         .regulators_node = of_match_ptr("regulators"), \
 249         .id = ATC2603C_ID_LDO##num, \
 250         .ops = &atc260x_ldo_fixed_ops, \
 251         .type = REGULATOR_VOLTAGE, \
 252         .min_uV = min, \
 253         .uV_step = step, \
 254         .n_voltages = n_volt, \
 255         .vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
 256         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 257         .enable_time = 2000, \
 258         .owner = THIS_MODULE, \
 259 }
 260
 261 #define atc2603c_reg_desc_ldo_noops(num, vfixed) { \
 262         .name = "LDO"#num, \
 263         .supply_name = "ldo"#num, \
 264         .of_match = of_match_ptr("ldo"#num), \
 265         .regulators_node = of_match_ptr("regulators"), \
 266         .id = ATC2603C_ID_LDO##num, \
 267         .ops = &atc260x_no_ops, \
 268         .type = REGULATOR_VOLTAGE, \
 269         .fixed_uV = vfixed, \
 270         .n_voltages = 1, \
 271         .owner = THIS_MODULE, \
 272 }
 273
 274 #define atc2603c_reg_desc_ldo_switch(num, min, step, n_volt, vsel_h, vsel_l) { \
 275         .name = "SWITCHLDO"#num, \
 276         .supply_name = "switchldo"#num, \
 277         .of_match = of_match_ptr("switchldo"#num), \
 278         .regulators_node = of_match_ptr("regulators"), \
 279         .id = ATC2603C_ID_SWITCHLDO##num, \
 280         .ops = &atc260x_ldo_bypass_discharge_ops, \
 281         .type = REGULATOR_VOLTAGE, \
 282         .min_uV = min, \
 283         .uV_step = step, \
 284         .n_voltages = n_volt, \
 285         .vsel_reg = ATC2603C_PMU_SWITCH_CTL, \
 286         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 287         .enable_reg = ATC2603C_PMU_SWITCH_CTL, \
 288         .enable_mask = BIT(15), \
 289         .enable_is_inverted = true, \
 290         .enable_time = 2000, \
 291         .bypass_reg = ATC2603C_PMU_SWITCH_CTL, \
 292         .bypass_mask = BIT(5), \
 293         .active_discharge_reg = ATC2603C_PMU_SWITCH_CTL, \
 294         .active_discharge_mask = BIT(1), \
 295         .active_discharge_on = BIT(1), \
 296         .owner = THIS_MODULE, \
 297 }
 298
 299 static const struct regulator_desc atc2603c_reg[] = {
 300         atc2603c_reg_desc_dcdc_fixed(1, 700000, 25000, 29, 11, 7),
 301         atc2603c_reg_desc_dcdc_range(2, 12, 8),
 302         atc2603c_reg_desc_dcdc_fixed(3, 2600000, 100000, 8, 11, 9),
 303         atc2603c_reg_desc_ldo_fixed(1, 2600000, 100000, 8, 15, 13),
 304         atc2603c_reg_desc_ldo_fixed(2, 2600000, 100000, 8, 15, 13),
 305         atc2603c_reg_desc_ldo_fixed(3, 1500000, 100000, 6, 15, 13),
 306         atc2603c_reg_desc_ldo(5, 2600000, 100000, 8, 15, 13),
 307         atc2603c_reg_desc_ldo_fixed(6, 700000, 25000, 29, 15, 11),
 308         atc2603c_reg_desc_ldo(7, 1500000, 100000, 6, 15, 13),
 309         atc2603c_reg_desc_ldo(8, 2300000, 100000, 11, 15, 12),
 310         atc2603c_reg_desc_ldo_fixed(11, 2600000, 100000, 8, 15, 13),
 311         atc2603c_reg_desc_ldo_noops(12, 1800000),
 312         atc2603c_reg_desc_ldo_switch(1, 3000000, 100000, 4, 4, 3),
 313 };
 314
 315 static const struct regulator_desc atc2603c_reg_dcdc2_ver_b =
 316         atc2603c_reg_desc_dcdc(2, 1000000, 50000, 18, 12, 8);
 317
 318 enum atc2609a_reg_ids {
 319         ATC2609A_ID_DCDC0,
 320         ATC2609A_ID_DCDC1,
 321         ATC2609A_ID_DCDC2,
 322         ATC2609A_ID_DCDC3,
 323         ATC2609A_ID_DCDC4,
 324         ATC2609A_ID_LDO0,
 325         ATC2609A_ID_LDO1,
 326         ATC2609A_ID_LDO2,
 327         ATC2609A_ID_LDO3,
 328         ATC2609A_ID_LDO4,
 329         ATC2609A_ID_LDO5,
 330         ATC2609A_ID_LDO6,
 331         ATC2609A_ID_LDO7,
 332         ATC2609A_ID_LDO8,
 333         ATC2609A_ID_LDO9,
 334         ATC2609A_ID_MAX,
 335 };
 336
 337 #define atc2609a_reg_desc_dcdc(num, en_bit) { \
 338         .name = "DCDC"#num, \
 339         .supply_name = "dcdc"#num, \
 340         .of_match = of_match_ptr("dcdc"#num), \
 341         .regulators_node = of_match_ptr("regulators"), \
 342         .id = ATC2609A_ID_DCDC##num, \
 343         .ops = &atc260x_dcdc_ops, \
 344         .type = REGULATOR_VOLTAGE, \
 345         .min_uV = 600000, \
 346         .uV_step = 6250, \
 347         .n_voltages = 256, \
 348         .vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
 349         .vsel_mask = GENMASK(15, 8), \
 350         .enable_reg = ATC2609A_PMU_DC_OSC, \
 351         .enable_mask = BIT(en_bit), \
 352         .enable_time = 800, \
 353         .owner = THIS_MODULE, \
 354 }
 355
 356 #define atc2609a_reg_desc_dcdc_range(num, en_bit) { \
 357         .name = "DCDC"#num, \
 358         .supply_name = "dcdc"#num, \
 359         .of_match = of_match_ptr("dcdc"#num), \
 360         .regulators_node = of_match_ptr("regulators"), \
 361         .id = ATC2609A_ID_DCDC##num, \
 362         .ops = &atc260x_dcdc_range_ops, \
 363         .type = REGULATOR_VOLTAGE, \
 364         .n_voltages = 233, \
 365         .linear_ranges = atc2609a_dcdc_voltage_ranges, \
 366         .n_linear_ranges = ARRAY_SIZE(atc2609a_dcdc_voltage_ranges), \
 367         .vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
 368         .vsel_mask = GENMASK(15, 8), \
 369         .enable_reg = ATC2609A_PMU_DC_OSC, \
 370         .enable_mask = BIT(en_bit), \
 371         .enable_time = 800, \
 372         .owner = THIS_MODULE, \
 373 }
 374
 375 #define atc2609a_reg_desc_ldo(num) { \
 376         .name = "LDO"#num, \
 377         .supply_name = "ldo"#num, \
 378         .of_match = of_match_ptr("ldo"#num), \
 379         .regulators_node = of_match_ptr("regulators"), \
 380         .id = ATC2609A_ID_LDO##num, \
 381         .ops = &atc260x_ldo_ops, \
 382         .type = REGULATOR_VOLTAGE, \
 383         .min_uV = 700000, \
 384         .uV_step = 100000, \
 385         .n_voltages = 16, \
 386         .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 387         .vsel_mask = GENMASK(4, 1), \
 388         .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 389         .enable_mask = BIT(0), \
 390         .enable_time = 2000, \
 391         .owner = THIS_MODULE, \
 392 }
 393
 394 #define atc2609a_reg_desc_ldo_bypass(num) { \
 395         .name = "LDO"#num, \
 396         .supply_name = "ldo"#num, \
 397         .of_match = of_match_ptr("ldo"#num), \
 398         .regulators_node = of_match_ptr("regulators"), \
 399         .id = ATC2609A_ID_LDO##num, \
 400         .ops = &atc260x_ldo_bypass_ops, \
 401         .type = REGULATOR_VOLTAGE, \
 402         .min_uV = 2300000, \
 403         .uV_step = 100000, \
 404         .n_voltages = 12, \
 405         .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 406         .vsel_mask = GENMASK(5, 2), \
 407         .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 408         .enable_mask = BIT(0), \
 409         .enable_time = 2000, \
 410         .bypass_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 411         .bypass_mask = BIT(1), \
 412         .owner = THIS_MODULE, \
 413 }
 414
 415 #define atc2609a_reg_desc_ldo_range_pick(num, n_range, n_volt) { \
 416         .name = "LDO"#num, \
 417         .supply_name = "ldo"#num, \
 418         .of_match = of_match_ptr("ldo"#num), \
 419         .regulators_node = of_match_ptr("regulators"), \
 420         .id = ATC2609A_ID_LDO##num, \
 421         .ops = &atc260x_ldo_range_pick_ops, \
 422         .type = REGULATOR_VOLTAGE, \
 423         .linear_ranges = atc2609a_ldo_voltage_ranges##n_range, \
 424         .n_linear_ranges = ARRAY_SIZE(atc2609a_ldo_voltage_ranges##n_range), \
 425         .n_voltages = n_volt, \
 426         .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 427         .vsel_mask = GENMASK(4, 1), \
 428         .vsel_range_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 429         .vsel_range_mask = BIT(5), \
 430         .linear_range_selectors = atc260x_ldo_voltage_range_sel, \
 431         .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 432         .enable_mask = BIT(0), \
 433         .enable_time = 2000, \
 434         .owner = THIS_MODULE, \
 435 }
 436
 437 #define atc2609a_reg_desc_ldo_fixed(num) { \
 438         .name = "LDO"#num, \
 439         .supply_name = "ldo"#num, \
 440         .of_match = of_match_ptr("ldo"#num), \
 441         .regulators_node = of_match_ptr("regulators"), \
 442         .id = ATC2609A_ID_LDO##num, \
 443         .ops = &atc260x_ldo_fixed_ops, \
 444         .type = REGULATOR_VOLTAGE, \
 445         .min_uV = 2600000, \
 446         .uV_step = 100000, \
 447         .n_voltages = 8, \
 448         .vsel_reg = ATC2609A_PMU_LDO##num##_CTL, \
 449         .vsel_mask = GENMASK(15, 13), \
 450         .enable_time = 2000, \
 451         .owner = THIS_MODULE, \
 452 }
 453
 454 static const struct regulator_desc atc2609a_reg[] = {
 455         atc2609a_reg_desc_dcdc(0, 4),
 456         atc2609a_reg_desc_dcdc(1, 5),
 457         atc2609a_reg_desc_dcdc(2, 6),
 458         atc2609a_reg_desc_dcdc_range(3, 7),
 459         atc2609a_reg_desc_dcdc(4, 8),
 460         atc2609a_reg_desc_ldo_bypass(0),
 461         atc2609a_reg_desc_ldo_bypass(1),
 462         atc2609a_reg_desc_ldo_bypass(2),
 463         atc2609a_reg_desc_ldo_range_pick(3, 0, 29),
 464         atc2609a_reg_desc_ldo_range_pick(4, 0, 29),
 465         atc2609a_reg_desc_ldo(5),
 466         atc2609a_reg_desc_ldo_range_pick(6, 1, 28),
 467         atc2609a_reg_desc_ldo_range_pick(7, 0, 29),
 468         atc2609a_reg_desc_ldo_range_pick(8, 0, 29),
 469         atc2609a_reg_desc_ldo_fixed(9),
 470 };
 471
 472 static int atc260x_regulator_probe(struct platform_device *pdev)
 473 {
 474         struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent);
 475         struct device *dev = atc260x->dev;
 476         struct atc260x_regulator_data *atc260x_data;
 477         struct regulator_config config = {};
 478         struct regulator_dev *atc260x_rdev;
 479         const struct regulator_desc *regulators;
 480         bool atc2603c_ver_b = false;
 481         int i, nregulators;
 482
 483         atc260x_data = devm_kzalloc(&pdev->dev, sizeof(*atc260x_data), GFP_KERNEL);
 484         if (!atc260x_data)
 485                 return -ENOMEM;
 486
 487         atc260x_data->voltage_time_dcdc = 350;
 488         atc260x_data->voltage_time_ldo = 800;
 489
 490         switch (atc260x->ic_type) {
 491         case ATC2603C:
 492                 regulators = atc2603c_reg;
 493                 nregulators = ATC2603C_ID_MAX;
 494                 atc2603c_ver_b = atc260x->ic_ver == ATC260X_B;
 495                 break;
 496         case ATC2609A:
 497                 atc260x_data->voltage_time_dcdc = 250;
 498                 regulators = atc2609a_reg;
 499                 nregulators = ATC2609A_ID_MAX;
 500                 break;
 501         default:
 502                 dev_err(dev, "unsupported ATC260X ID %d\n", atc260x->ic_type);
 503                 return -EINVAL;
 504         }
 505
 506         config.dev = dev;
 507         config.regmap = atc260x->regmap;
 508         config.driver_data = atc260x_data;
 509
 510         /* Instantiate the regulators */
 511         for (i = 0; i < nregulators; i++) {
 512                 if (atc2603c_ver_b && regulators[i].id == ATC2603C_ID_DCDC2)
 513                         atc260x_rdev = devm_regulator_register(&pdev->dev,
 514                                                                &atc2603c_reg_dcdc2_ver_b,
 515                                                                &config);
 516                 else
 517                         atc260x_rdev = devm_regulator_register(&pdev->dev,
 518                                                                &regulators[i],
 519                                                                &config);
 520                 if (IS_ERR(atc260x_rdev)) {
 521                         dev_err(dev, "failed to register regulator: %d\n", i);
 522                         return PTR_ERR(atc260x_rdev);
 523                 }
 524         }
 525
 526         return 0;
 527 }
 528
 529 static struct platform_driver atc260x_regulator_driver = {
 530         .probe = atc260x_regulator_probe,
 531         .driver = {
 532                 .name = "atc260x-regulator",
 533         },
 534 };
 535
 536 module_platform_driver(atc260x_regulator_driver);
 537
 538 MODULE_DESCRIPTION("Regulator driver for ATC260x PMICs");
 539 MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
 540 MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>");
 541 MODULE_LICENSE("GPL");