drivers/regulator/atc260x-regulator.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Regulator driver for ATC260x PMICs
   4 //
   5 // Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
   6 // Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
   7
   8 #include <linux/mfd/atc260x/core.h>
   9 #include <linux/module.h>
  10 #include <linux/of.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/regmap.h>
  13 #include <linux/regulator/driver.h>
  14
  15 struct atc260x_regulator_data {
  16         int voltage_time_dcdc;
  17         int voltage_time_ldo;
  18 };
  19
  20 static const struct linear_range atc2603c_dcdc_voltage_ranges[] = {
  21         REGULATOR_LINEAR_RANGE(1300000, 0, 13, 50000),
  22         REGULATOR_LINEAR_RANGE(1950000, 14, 15, 100000),
  23 };
  24
  25 static const struct linear_range atc2609a_dcdc_voltage_ranges[] = {
  26         REGULATOR_LINEAR_RANGE(600000, 0, 127, 6250),
  27         REGULATOR_LINEAR_RANGE(1400000, 128, 232, 25000),
  28 };
  29
  30 static const struct linear_range atc2609a_ldo_voltage_ranges0[] = {
  31         REGULATOR_LINEAR_RANGE(700000, 0, 15, 100000),
  32         REGULATOR_LINEAR_RANGE(2100000, 0, 12, 100000),
  33 };
  34
  35 static const struct linear_range atc2609a_ldo_voltage_ranges1[] = {
  36         REGULATOR_LINEAR_RANGE(850000, 0, 15, 100000),
  37         REGULATOR_LINEAR_RANGE(2100000, 0, 11, 100000),
  38 };
  39
  40 static const unsigned int atc260x_ldo_voltage_range_sel[] = {
  41         0x0, 0x1,
  42 };
  43
  44 static int atc260x_dcdc_set_voltage_time_sel(struct regulator_dev *rdev,
  45                                              unsigned int old_selector,
  46                                              unsigned int new_selector)
  47 {
  48         struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
  49
  50         if (new_selector > old_selector)
  51                 return data->voltage_time_dcdc;
  52
  53         return 0;
  54 }
  55
  56 static int atc260x_ldo_set_voltage_time_sel(struct regulator_dev *rdev,
  57                                             unsigned int old_selector,
  58                                             unsigned int new_selector)
  59 {
  60         struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
  61
  62         if (new_selector > old_selector)
  63                 return data->voltage_time_ldo;
  64
  65         return 0;
  66 }
  67
  68 static const struct regulator_ops atc260x_dcdc_ops = {
  69         .enable = regulator_enable_regmap,
  70         .disable = regulator_disable_regmap,
  71         .is_enabled = regulator_is_enabled_regmap,
  72         .list_voltage = regulator_list_voltage_linear,
  73         .set_voltage_sel = regulator_set_voltage_sel_regmap,
  74         .get_voltage_sel = regulator_get_voltage_sel_regmap,
  75         .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
  76 };
  77
  78 static const struct regulator_ops atc260x_ldo_ops = {
  79         .enable = regulator_enable_regmap,
  80         .disable = regulator_disable_regmap,
  81         .is_enabled = regulator_is_enabled_regmap,
  82         .list_voltage = regulator_list_voltage_linear,
  83         .set_voltage_sel = regulator_set_voltage_sel_regmap,
  84         .get_voltage_sel = regulator_get_voltage_sel_regmap,
  85         .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
  86 };
  87
  88 static const struct regulator_ops atc260x_ldo_bypass_ops = {
  89         .enable = regulator_enable_regmap,
  90         .disable = regulator_disable_regmap,
  91         .is_enabled = regulator_is_enabled_regmap,
  92         .list_voltage = regulator_list_voltage_linear,
  93         .set_voltage_sel = regulator_set_voltage_sel_regmap,
  94         .get_voltage_sel = regulator_get_voltage_sel_regmap,
  95         .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
  96         .set_bypass = regulator_set_bypass_regmap,
  97         .get_bypass = regulator_get_bypass_regmap,
  98 };
  99
 100 static const struct regulator_ops atc260x_ldo_bypass_discharge_ops = {
 101         .enable = regulator_enable_regmap,
 102         .disable = regulator_disable_regmap,
 103         .is_enabled = regulator_is_enabled_regmap,
 104         .list_voltage = regulator_list_voltage_linear,
 105         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 106         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 107         .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
 108         .set_bypass = regulator_set_bypass_regmap,
 109         .get_bypass = regulator_get_bypass_regmap,
 110         .set_active_discharge = regulator_set_active_discharge_regmap,
 111 };
 112
 113 static const struct regulator_ops atc260x_dcdc_range_ops = {
 114         .enable = regulator_enable_regmap,
 115         .disable = regulator_disable_regmap,
 116         .is_enabled = regulator_is_enabled_regmap,
 117         .list_voltage = regulator_list_voltage_linear_range,
 118         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 119         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 120         .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
 121 };
 122
 123 static const struct regulator_ops atc260x_ldo_range_pick_ops = {
 124         .enable = regulator_enable_regmap,
 125         .disable = regulator_disable_regmap,
 126         .is_enabled = regulator_is_enabled_regmap,
 127         .list_voltage = regulator_list_voltage_pickable_linear_range,
 128         .set_voltage_sel = regulator_set_voltage_sel_pickable_regmap,
 129         .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
 130         .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
 131 };
 132
 133 static const struct regulator_ops atc260x_dcdc_fixed_ops = {
 134         .list_voltage = regulator_list_voltage_linear,
 135         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 136         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 137         .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
 138 };
 139
 140 static const struct regulator_ops atc260x_ldo_fixed_ops = {
 141         .list_voltage = regulator_list_voltage_linear,
 142         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 143         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 144         .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
 145 };
 146
 147 static const struct regulator_ops atc260x_no_ops = {
 148 };
 149
 150 /*
 151  * Note LDO8 is not documented in datasheet (v2.4), but supported
 152  * in the vendor's driver implementation (xapp-le-kernel).
 153  */
 154 enum atc2603c_reg_ids {
 155         ATC2603C_ID_DCDC1,
 156         ATC2603C_ID_DCDC2,
 157         ATC2603C_ID_DCDC3,
 158         ATC2603C_ID_LDO1,
 159         ATC2603C_ID_LDO2,
 160         ATC2603C_ID_LDO3,
 161         ATC2603C_ID_LDO5,
 162         ATC2603C_ID_LDO6,
 163         ATC2603C_ID_LDO7,
 164         ATC2603C_ID_LDO8,
 165         ATC2603C_ID_LDO11,
 166         ATC2603C_ID_LDO12,
 167         ATC2603C_ID_SWITCHLDO1,
 168         ATC2603C_ID_MAX,
 169 };
 170
 171 #define atc2603c_reg_desc_dcdc(num, min, step, n_volt, vsel_h, vsel_l) { \
 172         .name = "DCDC"#num, \
 173         .supply_name = "dcdc"#num, \
 174         .of_match = of_match_ptr("dcdc"#num), \
 175         .regulators_node = of_match_ptr("regulators"), \
 176         .id = ATC2603C_ID_DCDC##num, \
 177         .ops = &atc260x_dcdc_ops, \
 178         .type = REGULATOR_VOLTAGE, \
 179         .min_uV = min, \
 180         .uV_step = step, \
 181         .n_voltages = n_volt, \
 182         .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
 183         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 184         .enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
 185         .enable_mask = BIT(15), \
 186         .enable_time = 800, \
 187         .owner = THIS_MODULE, \
 188 }
 189
 190 #define atc2603c_reg_desc_dcdc_range(num, vsel_h, vsel_l) { \
 191         .name = "DCDC"#num, \
 192         .supply_name = "dcdc"#num, \
 193         .of_match = of_match_ptr("dcdc"#num), \
 194         .regulators_node = of_match_ptr("regulators"), \
 195         .id = ATC2603C_ID_DCDC##num, \
 196         .ops = &atc260x_dcdc_range_ops, \
 197         .type = REGULATOR_VOLTAGE, \
 198         .n_voltages = 16, \
 199         .linear_ranges = atc2603c_dcdc_voltage_ranges, \
 200         .n_linear_ranges = ARRAY_SIZE(atc2603c_dcdc_voltage_ranges), \
 201         .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
 202         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 203         .enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
 204         .enable_mask = BIT(15), \
 205         .enable_time = 800, \
 206         .owner = THIS_MODULE, \
 207 }
 208
 209 #define atc2603c_reg_desc_dcdc_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
 210         .name = "DCDC"#num, \
 211         .supply_name = "dcdc"#num, \
 212         .of_match = of_match_ptr("dcdc"#num), \
 213         .regulators_node = of_match_ptr("regulators"), \
 214         .id = ATC2603C_ID_DCDC##num, \
 215         .ops = &atc260x_dcdc_fixed_ops, \
 216         .type = REGULATOR_VOLTAGE, \
 217         .min_uV = min, \
 218         .uV_step = step, \
 219         .n_voltages = n_volt, \
 220         .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
 221         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 222         .enable_time = 800, \
 223         .owner = THIS_MODULE, \
 224 }
 225
 226 #define atc2603c_reg_desc_ldo(num, min, step, n_volt, vsel_h, vsel_l) { \
 227         .name = "LDO"#num, \
 228         .supply_name = "ldo"#num, \
 229         .of_match = of_match_ptr("ldo"#num), \
 230         .regulators_node = of_match_ptr("regulators"), \
 231         .id = ATC2603C_ID_LDO##num, \
 232         .ops = &atc260x_ldo_ops, \
 233         .type = REGULATOR_VOLTAGE, \
 234         .min_uV = min, \
 235         .uV_step = step, \
 236         .n_voltages = n_volt, \
 237         .vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
 238         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 239         .enable_reg = ATC2603C_PMU_LDO##num##_CTL, \
 240         .enable_mask = BIT(0), \
 241         .enable_time = 2000, \
 242         .owner = THIS_MODULE, \
 243 }
 244
 245 #define atc2603c_reg_desc_ldo_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
 246         .name = "LDO"#num, \
 247         .supply_name = "ldo"#num, \
 248         .of_match = of_match_ptr("ldo"#num), \
 249         .regulators_node = of_match_ptr("regulators"), \
 250         .id = ATC2603C_ID_LDO##num, \
 251         .ops = &atc260x_ldo_fixed_ops, \
 252         .type = REGULATOR_VOLTAGE, \
 253         .min_uV = min, \
 254         .uV_step = step, \
 255         .n_voltages = n_volt, \
 256         .vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
 257         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 258         .enable_time = 2000, \
 259         .owner = THIS_MODULE, \
 260 }
 261
 262 #define atc2603c_reg_desc_ldo_noops(num, vfixed) { \
 263         .name = "LDO"#num, \
 264         .supply_name = "ldo"#num, \
 265         .of_match = of_match_ptr("ldo"#num), \
 266         .regulators_node = of_match_ptr("regulators"), \
 267         .id = ATC2603C_ID_LDO##num, \
 268         .ops = &atc260x_no_ops, \
 269         .type = REGULATOR_VOLTAGE, \
 270         .fixed_uV = vfixed, \
 271         .n_voltages = 1, \
 272         .owner = THIS_MODULE, \
 273 }
 274
 275 #define atc2603c_reg_desc_ldo_switch(num, min, step, n_volt, vsel_h, vsel_l) { \
 276         .name = "SWITCHLDO"#num, \
 277         .supply_name = "switchldo"#num, \
 278         .of_match = of_match_ptr("switchldo"#num), \
 279         .regulators_node = of_match_ptr("regulators"), \
 280         .id = ATC2603C_ID_SWITCHLDO##num, \
 281         .ops = &atc260x_ldo_bypass_discharge_ops, \
 282         .type = REGULATOR_VOLTAGE, \
 283         .min_uV = min, \
 284         .uV_step = step, \
 285         .n_voltages = n_volt, \
 286         .vsel_reg = ATC2603C_PMU_SWITCH_CTL, \
 287         .vsel_mask = GENMASK(vsel_h, vsel_l), \
 288         .enable_reg = ATC2603C_PMU_SWITCH_CTL, \
 289         .enable_mask = BIT(15), \
 290         .enable_is_inverted = true, \
 291         .enable_time = 2000, \
 292         .bypass_reg = ATC2603C_PMU_SWITCH_CTL, \
 293         .bypass_mask = BIT(5), \
 294         .active_discharge_reg = ATC2603C_PMU_SWITCH_CTL, \
 295         .active_discharge_mask = BIT(1), \
 296         .active_discharge_on = BIT(1), \
 297         .owner = THIS_MODULE, \
 298 }
 299
 300 static const struct regulator_desc atc2603c_reg[] = {
 301         atc2603c_reg_desc_dcdc_fixed(1, 700000, 25000, 29, 11, 7),
 302         atc2603c_reg_desc_dcdc_range(2, 12, 8),
 303         atc2603c_reg_desc_dcdc_fixed(3, 2600000, 100000, 8, 11, 9),
 304         atc2603c_reg_desc_ldo_fixed(1, 2600000, 100000, 8, 15, 13),
 305         atc2603c_reg_desc_ldo_fixed(2, 2600000, 100000, 8, 15, 13),
 306         atc2603c_reg_desc_ldo_fixed(3, 1500000, 100000, 6, 15, 13),
 307         atc2603c_reg_desc_ldo(5, 2600000, 100000, 8, 15, 13),
 308         atc2603c_reg_desc_ldo_fixed(6, 700000, 25000, 29, 15, 11),
 309         atc2603c_reg_desc_ldo(7, 1500000, 100000, 6, 15, 13),
 310         atc2603c_reg_desc_ldo(8, 2300000, 100000, 11, 15, 12),
 311         atc2603c_reg_desc_ldo_fixed(11, 2600000, 100000, 8, 15, 13),
 312         atc2603c_reg_desc_ldo_noops(12, 1800000),
 313         atc2603c_reg_desc_ldo_switch(1, 3000000, 100000, 4, 4, 3),
 314 };
 315
 316 static const struct regulator_desc atc2603c_reg_dcdc2_ver_b =
 317         atc2603c_reg_desc_dcdc(2, 1000000, 50000, 18, 12, 8);
 318
 319 enum atc2609a_reg_ids {
 320         ATC2609A_ID_DCDC0,
 321         ATC2609A_ID_DCDC1,
 322         ATC2609A_ID_DCDC2,
 323         ATC2609A_ID_DCDC3,
 324         ATC2609A_ID_DCDC4,
 325         ATC2609A_ID_LDO0,
 326         ATC2609A_ID_LDO1,
 327         ATC2609A_ID_LDO2,
 328         ATC2609A_ID_LDO3,
 329         ATC2609A_ID_LDO4,
 330         ATC2609A_ID_LDO5,
 331         ATC2609A_ID_LDO6,
 332         ATC2609A_ID_LDO7,
 333         ATC2609A_ID_LDO8,
 334         ATC2609A_ID_LDO9,
 335         ATC2609A_ID_MAX,
 336 };
 337
 338 #define atc2609a_reg_desc_dcdc(num, en_bit) { \
 339         .name = "DCDC"#num, \
 340         .supply_name = "dcdc"#num, \
 341         .of_match = of_match_ptr("dcdc"#num), \
 342         .regulators_node = of_match_ptr("regulators"), \
 343         .id = ATC2609A_ID_DCDC##num, \
 344         .ops = &atc260x_dcdc_ops, \
 345         .type = REGULATOR_VOLTAGE, \
 346         .min_uV = 600000, \
 347         .uV_step = 6250, \
 348         .n_voltages = 256, \
 349         .vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
 350         .vsel_mask = GENMASK(15, 8), \
 351         .enable_reg = ATC2609A_PMU_DC_OSC, \
 352         .enable_mask = BIT(en_bit), \
 353         .enable_time = 800, \
 354         .owner = THIS_MODULE, \
 355 }
 356
 357 #define atc2609a_reg_desc_dcdc_range(num, en_bit) { \
 358         .name = "DCDC"#num, \
 359         .supply_name = "dcdc"#num, \
 360         .of_match = of_match_ptr("dcdc"#num), \
 361         .regulators_node = of_match_ptr("regulators"), \
 362         .id = ATC2609A_ID_DCDC##num, \
 363         .ops = &atc260x_dcdc_range_ops, \
 364         .type = REGULATOR_VOLTAGE, \
 365         .n_voltages = 233, \
 366         .linear_ranges = atc2609a_dcdc_voltage_ranges, \
 367         .n_linear_ranges = ARRAY_SIZE(atc2609a_dcdc_voltage_ranges), \
 368         .vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
 369         .vsel_mask = GENMASK(15, 8), \
 370         .enable_reg = ATC2609A_PMU_DC_OSC, \
 371         .enable_mask = BIT(en_bit), \
 372         .enable_time = 800, \
 373         .owner = THIS_MODULE, \
 374 }
 375
 376 #define atc2609a_reg_desc_ldo(num) { \
 377         .name = "LDO"#num, \
 378         .supply_name = "ldo"#num, \
 379         .of_match = of_match_ptr("ldo"#num), \
 380         .regulators_node = of_match_ptr("regulators"), \
 381         .id = ATC2609A_ID_LDO##num, \
 382         .ops = &atc260x_ldo_ops, \
 383         .type = REGULATOR_VOLTAGE, \
 384         .min_uV = 700000, \
 385         .uV_step = 100000, \
 386         .n_voltages = 16, \
 387         .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 388         .vsel_mask = GENMASK(4, 1), \
 389         .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 390         .enable_mask = BIT(0), \
 391         .enable_time = 2000, \
 392         .owner = THIS_MODULE, \
 393 }
 394
 395 #define atc2609a_reg_desc_ldo_bypass(num) { \
 396         .name = "LDO"#num, \
 397         .supply_name = "ldo"#num, \
 398         .of_match = of_match_ptr("ldo"#num), \
 399         .regulators_node = of_match_ptr("regulators"), \
 400         .id = ATC2609A_ID_LDO##num, \
 401         .ops = &atc260x_ldo_bypass_ops, \
 402         .type = REGULATOR_VOLTAGE, \
 403         .min_uV = 2300000, \
 404         .uV_step = 100000, \
 405         .n_voltages = 12, \
 406         .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 407         .vsel_mask = GENMASK(5, 2), \
 408         .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 409         .enable_mask = BIT(0), \
 410         .enable_time = 2000, \
 411         .bypass_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 412         .bypass_mask = BIT(1), \
 413         .owner = THIS_MODULE, \
 414 }
 415
 416 #define atc2609a_reg_desc_ldo_range_pick(num, n_range, n_volt) { \
 417         .name = "LDO"#num, \
 418         .supply_name = "ldo"#num, \
 419         .of_match = of_match_ptr("ldo"#num), \
 420         .regulators_node = of_match_ptr("regulators"), \
 421         .id = ATC2609A_ID_LDO##num, \
 422         .ops = &atc260x_ldo_range_pick_ops, \
 423         .type = REGULATOR_VOLTAGE, \
 424         .linear_ranges = atc2609a_ldo_voltage_ranges##n_range, \
 425         .n_linear_ranges = ARRAY_SIZE(atc2609a_ldo_voltage_ranges##n_range), \
 426         .n_voltages = n_volt, \
 427         .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 428         .vsel_mask = GENMASK(4, 1), \
 429         .vsel_range_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 430         .vsel_range_mask = BIT(5), \
 431         .linear_range_selectors_bitfield = atc260x_ldo_voltage_range_sel, \
 432         .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
 433         .enable_mask = BIT(0), \
 434         .enable_time = 2000, \
 435         .owner = THIS_MODULE, \
 436 }
 437
 438 #define atc2609a_reg_desc_ldo_fixed(num) { \
 439         .name = "LDO"#num, \
 440         .supply_name = "ldo"#num, \
 441         .of_match = of_match_ptr("ldo"#num), \
 442         .regulators_node = of_match_ptr("regulators"), \
 443         .id = ATC2609A_ID_LDO##num, \
 444         .ops = &atc260x_ldo_fixed_ops, \
 445         .type = REGULATOR_VOLTAGE, \
 446         .min_uV = 2600000, \
 447         .uV_step = 100000, \
 448         .n_voltages = 8, \
 449         .vsel_reg = ATC2609A_PMU_LDO##num##_CTL, \
 450         .vsel_mask = GENMASK(15, 13), \
 451         .enable_time = 2000, \
 452         .owner = THIS_MODULE, \
 453 }
 454
 455 static const struct regulator_desc atc2609a_reg[] = {
 456         atc2609a_reg_desc_dcdc(0, 4),
 457         atc2609a_reg_desc_dcdc(1, 5),
 458         atc2609a_reg_desc_dcdc(2, 6),
 459         atc2609a_reg_desc_dcdc_range(3, 7),
 460         atc2609a_reg_desc_dcdc(4, 8),
 461         atc2609a_reg_desc_ldo_bypass(0),
 462         atc2609a_reg_desc_ldo_bypass(1),
 463         atc2609a_reg_desc_ldo_bypass(2),
 464         atc2609a_reg_desc_ldo_range_pick(3, 0, 29),
 465         atc2609a_reg_desc_ldo_range_pick(4, 0, 29),
 466         atc2609a_reg_desc_ldo(5),
 467         atc2609a_reg_desc_ldo_range_pick(6, 1, 28),
 468         atc2609a_reg_desc_ldo_range_pick(7, 0, 29),
 469         atc2609a_reg_desc_ldo_range_pick(8, 0, 29),
 470         atc2609a_reg_desc_ldo_fixed(9),
 471 };
 472
 473 static int atc260x_regulator_probe(struct platform_device *pdev)
 474 {
 475         struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent);
 476         struct device *dev = atc260x->dev;
 477         struct atc260x_regulator_data *atc260x_data;
 478         struct regulator_config config = {};
 479         struct regulator_dev *atc260x_rdev;
 480         const struct regulator_desc *regulators;
 481         bool atc2603c_ver_b = false;
 482         int i, nregulators;
 483
 484         atc260x_data = devm_kzalloc(&pdev->dev, sizeof(*atc260x_data), GFP_KERNEL);
 485         if (!atc260x_data)
 486                 return -ENOMEM;
 487
 488         atc260x_data->voltage_time_dcdc = 350;
 489         atc260x_data->voltage_time_ldo = 800;
 490
 491         switch (atc260x->ic_type) {
 492         case ATC2603C:
 493                 regulators = atc2603c_reg;
 494                 nregulators = ATC2603C_ID_MAX;
 495                 atc2603c_ver_b = atc260x->ic_ver == ATC260X_B;
 496                 break;
 497         case ATC2609A:
 498                 atc260x_data->voltage_time_dcdc = 250;
 499                 regulators = atc2609a_reg;
 500                 nregulators = ATC2609A_ID_MAX;
 501                 break;
 502         default:
 503                 dev_err(dev, "unsupported ATC260X ID %d\n", atc260x->ic_type);
 504                 return -EINVAL;
 505         }
 506
 507         config.dev = dev;
 508         config.regmap = atc260x->regmap;
 509         config.driver_data = atc260x_data;
 510
 511         /* Instantiate the regulators */
 512         for (i = 0; i < nregulators; i++) {
 513                 if (atc2603c_ver_b && regulators[i].id == ATC2603C_ID_DCDC2)
 514                         atc260x_rdev = devm_regulator_register(&pdev->dev,
 515                                                                &atc2603c_reg_dcdc2_ver_b,
 516                                                                &config);
 517                 else
 518                         atc260x_rdev = devm_regulator_register(&pdev->dev,
 519                                                                &regulators[i],
 520                                                                &config);
 521                 if (IS_ERR(atc260x_rdev)) {
 522                         dev_err(dev, "failed to register regulator: %d\n", i);
 523                         return PTR_ERR(atc260x_rdev);
 524                 }
 525         }
 526
 527         return 0;
 528 }
 529
 530 static struct platform_driver atc260x_regulator_driver = {
 531         .probe = atc260x_regulator_probe,
 532         .driver = {
 533                 .name = "atc260x-regulator",
 534                 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
 535         },
 536 };
 537
 538 module_platform_driver(atc260x_regulator_driver);
 539
 540 MODULE_DESCRIPTION("Regulator driver for ATC260x PMICs");
 541 MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
 542 MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>");
 543 MODULE_LICENSE("GPL");