misc: make sure Tizen notifier is executed before reset
[platform/kernel/linux-rpi.git] / drivers / regulator / ab8500.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) ST-Ericsson SA 2010
4  *
5  * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
6  *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
7  *          Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
8  *
9  * AB8500 peripheral regulators
10  *
11  * AB8500 supports the following regulators:
12  *   VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
13  *
14  * AB8505 supports the following regulators:
15  *   VAUX1/2/3/4/5/6, VINTCORE, VADC, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
16  */
17 #include <linux/init.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/err.h>
21 #include <linux/platform_device.h>
22 #include <linux/mfd/abx500.h>
23 #include <linux/mfd/abx500/ab8500.h>
24 #include <linux/of.h>
25 #include <linux/regulator/of_regulator.h>
26 #include <linux/regulator/driver.h>
27 #include <linux/regulator/machine.h>
28 #include <linux/slab.h>
29
30 /* AB8500 regulators */
31 enum ab8500_regulator_id {
32         AB8500_LDO_AUX1,
33         AB8500_LDO_AUX2,
34         AB8500_LDO_AUX3,
35         AB8500_LDO_INTCORE,
36         AB8500_LDO_TVOUT,
37         AB8500_LDO_AUDIO,
38         AB8500_LDO_ANAMIC1,
39         AB8500_LDO_ANAMIC2,
40         AB8500_LDO_DMIC,
41         AB8500_LDO_ANA,
42         AB8500_NUM_REGULATORS,
43 };
44
45 /* AB8505 regulators */
46 enum ab8505_regulator_id {
47         AB8505_LDO_AUX1,
48         AB8505_LDO_AUX2,
49         AB8505_LDO_AUX3,
50         AB8505_LDO_AUX4,
51         AB8505_LDO_AUX5,
52         AB8505_LDO_AUX6,
53         AB8505_LDO_INTCORE,
54         AB8505_LDO_ADC,
55         AB8505_LDO_AUDIO,
56         AB8505_LDO_ANAMIC1,
57         AB8505_LDO_ANAMIC2,
58         AB8505_LDO_AUX8,
59         AB8505_LDO_ANA,
60         AB8505_NUM_REGULATORS,
61 };
62
63 /* AB8500 registers */
64 enum ab8500_regulator_reg {
65         AB8500_REGUREQUESTCTRL2,
66         AB8500_REGUREQUESTCTRL3,
67         AB8500_REGUREQUESTCTRL4,
68         AB8500_REGUSYSCLKREQ1HPVALID1,
69         AB8500_REGUSYSCLKREQ1HPVALID2,
70         AB8500_REGUHWHPREQ1VALID1,
71         AB8500_REGUHWHPREQ1VALID2,
72         AB8500_REGUHWHPREQ2VALID1,
73         AB8500_REGUHWHPREQ2VALID2,
74         AB8500_REGUSWHPREQVALID1,
75         AB8500_REGUSWHPREQVALID2,
76         AB8500_REGUSYSCLKREQVALID1,
77         AB8500_REGUSYSCLKREQVALID2,
78         AB8500_REGUMISC1,
79         AB8500_VAUDIOSUPPLY,
80         AB8500_REGUCTRL1VAMIC,
81         AB8500_VPLLVANAREGU,
82         AB8500_VREFDDR,
83         AB8500_EXTSUPPLYREGU,
84         AB8500_VAUX12REGU,
85         AB8500_VRF1VAUX3REGU,
86         AB8500_VAUX1SEL,
87         AB8500_VAUX2SEL,
88         AB8500_VRF1VAUX3SEL,
89         AB8500_REGUCTRL2SPARE,
90         AB8500_REGUCTRLDISCH,
91         AB8500_REGUCTRLDISCH2,
92         AB8500_NUM_REGULATOR_REGISTERS,
93 };
94
95 /* AB8505 registers */
96 enum ab8505_regulator_reg {
97         AB8505_REGUREQUESTCTRL1,
98         AB8505_REGUREQUESTCTRL2,
99         AB8505_REGUREQUESTCTRL3,
100         AB8505_REGUREQUESTCTRL4,
101         AB8505_REGUSYSCLKREQ1HPVALID1,
102         AB8505_REGUSYSCLKREQ1HPVALID2,
103         AB8505_REGUHWHPREQ1VALID1,
104         AB8505_REGUHWHPREQ1VALID2,
105         AB8505_REGUHWHPREQ2VALID1,
106         AB8505_REGUHWHPREQ2VALID2,
107         AB8505_REGUSWHPREQVALID1,
108         AB8505_REGUSWHPREQVALID2,
109         AB8505_REGUSYSCLKREQVALID1,
110         AB8505_REGUSYSCLKREQVALID2,
111         AB8505_REGUVAUX4REQVALID,
112         AB8505_REGUMISC1,
113         AB8505_VAUDIOSUPPLY,
114         AB8505_REGUCTRL1VAMIC,
115         AB8505_VSMPSAREGU,
116         AB8505_VSMPSBREGU,
117         AB8505_VSAFEREGU, /* NOTE! PRCMU register */
118         AB8505_VPLLVANAREGU,
119         AB8505_EXTSUPPLYREGU,
120         AB8505_VAUX12REGU,
121         AB8505_VRF1VAUX3REGU,
122         AB8505_VSMPSASEL1,
123         AB8505_VSMPSASEL2,
124         AB8505_VSMPSASEL3,
125         AB8505_VSMPSBSEL1,
126         AB8505_VSMPSBSEL2,
127         AB8505_VSMPSBSEL3,
128         AB8505_VSAFESEL1, /* NOTE! PRCMU register */
129         AB8505_VSAFESEL2, /* NOTE! PRCMU register */
130         AB8505_VSAFESEL3, /* NOTE! PRCMU register */
131         AB8505_VAUX1SEL,
132         AB8505_VAUX2SEL,
133         AB8505_VRF1VAUX3SEL,
134         AB8505_VAUX4REQCTRL,
135         AB8505_VAUX4REGU,
136         AB8505_VAUX4SEL,
137         AB8505_REGUCTRLDISCH,
138         AB8505_REGUCTRLDISCH2,
139         AB8505_REGUCTRLDISCH3,
140         AB8505_CTRLVAUX5,
141         AB8505_CTRLVAUX6,
142         AB8505_NUM_REGULATOR_REGISTERS,
143 };
144
145 /**
146  * struct ab8500_shared_mode - is used when mode is shared between
147  * two regulators.
148  * @shared_regulator: pointer to the other sharing regulator
149  * @lp_mode_req: low power mode requested by this regulator
150  */
151 struct ab8500_shared_mode {
152         struct ab8500_regulator_info *shared_regulator;
153         bool lp_mode_req;
154 };
155
156 /**
157  * struct ab8500_regulator_info - ab8500 regulator information
158  * @dev: device pointer
159  * @desc: regulator description
160  * @shared_mode: used when mode is shared between two regulators
161  * @load_lp_uA: maximum load in idle (low power) mode
162  * @update_bank: bank to control on/off
163  * @update_reg: register to control on/off
164  * @update_mask: mask to enable/disable and set mode of regulator
165  * @update_val: bits holding the regulator current mode
166  * @update_val_idle: bits to enable the regulator in idle (low power) mode
167  * @update_val_normal: bits to enable the regulator in normal (high power) mode
168  * @mode_bank: bank with location of mode register
169  * @mode_reg: mode register
170  * @mode_mask: mask for setting mode
171  * @mode_val_idle: mode setting for low power
172  * @mode_val_normal: mode setting for normal power
173  * @voltage_bank: bank to control regulator voltage
174  * @voltage_reg: register to control regulator voltage
175  * @voltage_mask: mask to control regulator voltage
176  * @expand_register: 
177  */
178 struct ab8500_regulator_info {
179         struct device           *dev;
180         struct regulator_desc   desc;
181         struct ab8500_shared_mode *shared_mode;
182         int load_lp_uA;
183         u8 update_bank;
184         u8 update_reg;
185         u8 update_mask;
186         u8 update_val;
187         u8 update_val_idle;
188         u8 update_val_normal;
189         u8 mode_bank;
190         u8 mode_reg;
191         u8 mode_mask;
192         u8 mode_val_idle;
193         u8 mode_val_normal;
194         u8 voltage_bank;
195         u8 voltage_reg;
196         u8 voltage_mask;
197 };
198
199 /* voltage tables for the vauxn/vintcore supplies */
200 static const unsigned int ldo_vauxn_voltages[] = {
201         1100000,
202         1200000,
203         1300000,
204         1400000,
205         1500000,
206         1800000,
207         1850000,
208         1900000,
209         2500000,
210         2650000,
211         2700000,
212         2750000,
213         2800000,
214         2900000,
215         3000000,
216         3300000,
217 };
218
219 static const unsigned int ldo_vaux3_voltages[] = {
220         1200000,
221         1500000,
222         1800000,
223         2100000,
224         2500000,
225         2750000,
226         2790000,
227         2910000,
228 };
229
230 static const unsigned int ldo_vaux56_voltages[] = {
231         1800000,
232         1050000,
233         1100000,
234         1200000,
235         1500000,
236         2200000,
237         2500000,
238         2790000,
239 };
240
241 static const unsigned int ldo_vintcore_voltages[] = {
242         1200000,
243         1225000,
244         1250000,
245         1275000,
246         1300000,
247         1325000,
248         1350000,
249 };
250
251 static const unsigned int fixed_1200000_voltage[] = {
252         1200000,
253 };
254
255 static const unsigned int fixed_1800000_voltage[] = {
256         1800000,
257 };
258
259 static const unsigned int fixed_2000000_voltage[] = {
260         2000000,
261 };
262
263 static const unsigned int fixed_2050000_voltage[] = {
264         2050000,
265 };
266
267 static const unsigned int ldo_vana_voltages[] = {
268         1050000,
269         1075000,
270         1100000,
271         1125000,
272         1150000,
273         1175000,
274         1200000,
275         1225000,
276 };
277
278 static const unsigned int ldo_vaudio_voltages[] = {
279         2000000,
280         2100000,
281         2200000,
282         2300000,
283         2400000,
284         2500000,
285         2600000,
286         2600000,        /* Duplicated in Vaudio and IsoUicc Control register. */
287 };
288
289 static DEFINE_MUTEX(shared_mode_mutex);
290 static struct ab8500_shared_mode ldo_anamic1_shared;
291 static struct ab8500_shared_mode ldo_anamic2_shared;
292
293 static int ab8500_regulator_enable(struct regulator_dev *rdev)
294 {
295         int ret;
296         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
297
298         if (info == NULL) {
299                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
300                 return -EINVAL;
301         }
302
303         ret = abx500_mask_and_set_register_interruptible(info->dev,
304                 info->update_bank, info->update_reg,
305                 info->update_mask, info->update_val);
306         if (ret < 0) {
307                 dev_err(rdev_get_dev(rdev),
308                         "couldn't set enable bits for regulator\n");
309                 return ret;
310         }
311
312         dev_vdbg(rdev_get_dev(rdev),
313                 "%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
314                 info->desc.name, info->update_bank, info->update_reg,
315                 info->update_mask, info->update_val);
316
317         return ret;
318 }
319
320 static int ab8500_regulator_disable(struct regulator_dev *rdev)
321 {
322         int ret;
323         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
324
325         if (info == NULL) {
326                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
327                 return -EINVAL;
328         }
329
330         ret = abx500_mask_and_set_register_interruptible(info->dev,
331                 info->update_bank, info->update_reg,
332                 info->update_mask, 0x0);
333         if (ret < 0) {
334                 dev_err(rdev_get_dev(rdev),
335                         "couldn't set disable bits for regulator\n");
336                 return ret;
337         }
338
339         dev_vdbg(rdev_get_dev(rdev),
340                 "%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
341                 info->desc.name, info->update_bank, info->update_reg,
342                 info->update_mask, 0x0);
343
344         return ret;
345 }
346
347 static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
348 {
349         int ret;
350         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
351         u8 regval;
352
353         if (info == NULL) {
354                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
355                 return -EINVAL;
356         }
357
358         ret = abx500_get_register_interruptible(info->dev,
359                 info->update_bank, info->update_reg, &regval);
360         if (ret < 0) {
361                 dev_err(rdev_get_dev(rdev),
362                         "couldn't read 0x%x register\n", info->update_reg);
363                 return ret;
364         }
365
366         dev_vdbg(rdev_get_dev(rdev),
367                 "%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
368                 " 0x%x\n",
369                 info->desc.name, info->update_bank, info->update_reg,
370                 info->update_mask, regval);
371
372         if (regval & info->update_mask)
373                 return 1;
374         else
375                 return 0;
376 }
377
378 static unsigned int ab8500_regulator_get_optimum_mode(
379                 struct regulator_dev *rdev, int input_uV,
380                 int output_uV, int load_uA)
381 {
382         unsigned int mode;
383
384         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
385
386         if (info == NULL) {
387                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
388                 return -EINVAL;
389         }
390
391         if (load_uA <= info->load_lp_uA)
392                 mode = REGULATOR_MODE_IDLE;
393         else
394                 mode = REGULATOR_MODE_NORMAL;
395
396         return mode;
397 }
398
399 static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
400                                      unsigned int mode)
401 {
402         int ret = 0;
403         u8 bank, reg, mask, val;
404         bool lp_mode_req = false;
405         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
406
407         if (info == NULL) {
408                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
409                 return -EINVAL;
410         }
411
412         if (info->mode_mask) {
413                 bank = info->mode_bank;
414                 reg = info->mode_reg;
415                 mask = info->mode_mask;
416         } else {
417                 bank = info->update_bank;
418                 reg = info->update_reg;
419                 mask = info->update_mask;
420         }
421
422         if (info->shared_mode)
423                 mutex_lock(&shared_mode_mutex);
424
425         switch (mode) {
426         case REGULATOR_MODE_NORMAL:
427                 if (info->shared_mode)
428                         lp_mode_req = false;
429
430                 if (info->mode_mask)
431                         val = info->mode_val_normal;
432                 else
433                         val = info->update_val_normal;
434                 break;
435         case REGULATOR_MODE_IDLE:
436                 if (info->shared_mode) {
437                         struct ab8500_regulator_info *shared_regulator;
438
439                         shared_regulator = info->shared_mode->shared_regulator;
440                         if (!shared_regulator->shared_mode->lp_mode_req) {
441                                 /* Other regulator prevent LP mode */
442                                 info->shared_mode->lp_mode_req = true;
443                                 goto out_unlock;
444                         }
445
446                         lp_mode_req = true;
447                 }
448
449                 if (info->mode_mask)
450                         val = info->mode_val_idle;
451                 else
452                         val = info->update_val_idle;
453                 break;
454         default:
455                 ret = -EINVAL;
456                 goto out_unlock;
457         }
458
459         if (info->mode_mask || ab8500_regulator_is_enabled(rdev)) {
460                 ret = abx500_mask_and_set_register_interruptible(info->dev,
461                         bank, reg, mask, val);
462                 if (ret < 0) {
463                         dev_err(rdev_get_dev(rdev),
464                                 "couldn't set regulator mode\n");
465                         goto out_unlock;
466                 }
467
468                 dev_vdbg(rdev_get_dev(rdev),
469                         "%s-set_mode (bank, reg, mask, value): "
470                         "0x%x, 0x%x, 0x%x, 0x%x\n",
471                         info->desc.name, bank, reg,
472                         mask, val);
473         }
474
475         if (!info->mode_mask)
476                 info->update_val = val;
477
478         if (info->shared_mode)
479                 info->shared_mode->lp_mode_req = lp_mode_req;
480
481 out_unlock:
482         if (info->shared_mode)
483                 mutex_unlock(&shared_mode_mutex);
484
485         return ret;
486 }
487
488 static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
489 {
490         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
491         int ret;
492         u8 val;
493         u8 val_normal;
494         u8 val_idle;
495
496         if (info == NULL) {
497                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
498                 return -EINVAL;
499         }
500
501         /* Need special handling for shared mode */
502         if (info->shared_mode) {
503                 if (info->shared_mode->lp_mode_req)
504                         return REGULATOR_MODE_IDLE;
505                 else
506                         return REGULATOR_MODE_NORMAL;
507         }
508
509         if (info->mode_mask) {
510                 /* Dedicated register for handling mode */
511                 ret = abx500_get_register_interruptible(info->dev,
512                 info->mode_bank, info->mode_reg, &val);
513                 val = val & info->mode_mask;
514
515                 val_normal = info->mode_val_normal;
516                 val_idle = info->mode_val_idle;
517         } else {
518                 /* Mode register same as enable register */
519                 val = info->update_val;
520                 val_normal = info->update_val_normal;
521                 val_idle = info->update_val_idle;
522         }
523
524         if (val == val_normal)
525                 ret = REGULATOR_MODE_NORMAL;
526         else if (val == val_idle)
527                 ret = REGULATOR_MODE_IDLE;
528         else
529                 ret = -EINVAL;
530
531         return ret;
532 }
533
534 static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
535 {
536         int ret, voltage_shift;
537         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
538         u8 regval;
539
540         if (info == NULL) {
541                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
542                 return -EINVAL;
543         }
544
545         voltage_shift = ffs(info->voltage_mask) - 1;
546
547         ret = abx500_get_register_interruptible(info->dev,
548                         info->voltage_bank, info->voltage_reg, &regval);
549         if (ret < 0) {
550                 dev_err(rdev_get_dev(rdev),
551                         "couldn't read voltage reg for regulator\n");
552                 return ret;
553         }
554
555         dev_vdbg(rdev_get_dev(rdev),
556                 "%s-get_voltage (bank, reg, mask, shift, value): "
557                 "0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
558                 info->desc.name, info->voltage_bank,
559                 info->voltage_reg, info->voltage_mask,
560                 voltage_shift, regval);
561
562         return (regval & info->voltage_mask) >> voltage_shift;
563 }
564
565 static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
566                                             unsigned selector)
567 {
568         int ret, voltage_shift;
569         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
570         u8 regval;
571
572         if (info == NULL) {
573                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
574                 return -EINVAL;
575         }
576
577         voltage_shift = ffs(info->voltage_mask) - 1;
578
579         /* set the registers for the request */
580         regval = (u8)selector << voltage_shift;
581         ret = abx500_mask_and_set_register_interruptible(info->dev,
582                         info->voltage_bank, info->voltage_reg,
583                         info->voltage_mask, regval);
584         if (ret < 0)
585                 dev_err(rdev_get_dev(rdev),
586                 "couldn't set voltage reg for regulator\n");
587
588         dev_vdbg(rdev_get_dev(rdev),
589                 "%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
590                 " 0x%x\n",
591                 info->desc.name, info->voltage_bank, info->voltage_reg,
592                 info->voltage_mask, regval);
593
594         return ret;
595 }
596
597 static const struct regulator_ops ab8500_regulator_volt_mode_ops = {
598         .enable                 = ab8500_regulator_enable,
599         .disable                = ab8500_regulator_disable,
600         .is_enabled             = ab8500_regulator_is_enabled,
601         .get_optimum_mode       = ab8500_regulator_get_optimum_mode,
602         .set_mode               = ab8500_regulator_set_mode,
603         .get_mode               = ab8500_regulator_get_mode,
604         .get_voltage_sel        = ab8500_regulator_get_voltage_sel,
605         .set_voltage_sel        = ab8500_regulator_set_voltage_sel,
606         .list_voltage           = regulator_list_voltage_table,
607 };
608
609 static const struct regulator_ops ab8500_regulator_volt_ops = {
610         .enable         = ab8500_regulator_enable,
611         .disable        = ab8500_regulator_disable,
612         .is_enabled     = ab8500_regulator_is_enabled,
613         .get_voltage_sel = ab8500_regulator_get_voltage_sel,
614         .set_voltage_sel = ab8500_regulator_set_voltage_sel,
615         .list_voltage   = regulator_list_voltage_table,
616 };
617
618 static const struct regulator_ops ab8500_regulator_mode_ops = {
619         .enable                 = ab8500_regulator_enable,
620         .disable                = ab8500_regulator_disable,
621         .is_enabled             = ab8500_regulator_is_enabled,
622         .get_optimum_mode       = ab8500_regulator_get_optimum_mode,
623         .set_mode               = ab8500_regulator_set_mode,
624         .get_mode               = ab8500_regulator_get_mode,
625         .list_voltage           = regulator_list_voltage_table,
626 };
627
628 static const struct regulator_ops ab8500_regulator_ops = {
629         .enable                 = ab8500_regulator_enable,
630         .disable                = ab8500_regulator_disable,
631         .is_enabled             = ab8500_regulator_is_enabled,
632         .list_voltage           = regulator_list_voltage_table,
633 };
634
635 static const struct regulator_ops ab8500_regulator_anamic_mode_ops = {
636         .enable         = ab8500_regulator_enable,
637         .disable        = ab8500_regulator_disable,
638         .is_enabled     = ab8500_regulator_is_enabled,
639         .set_mode       = ab8500_regulator_set_mode,
640         .get_mode       = ab8500_regulator_get_mode,
641         .list_voltage   = regulator_list_voltage_table,
642 };
643
644 /* AB8500 regulator information */
645 static struct ab8500_regulator_info
646                 ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
647         /*
648          * Variable Voltage Regulators
649          *   name, min mV, max mV,
650          *   update bank, reg, mask, enable val
651          *   volt bank, reg, mask
652          */
653         [AB8500_LDO_AUX1] = {
654                 .desc = {
655                         .name           = "LDO-AUX1",
656                         .ops            = &ab8500_regulator_volt_mode_ops,
657                         .type           = REGULATOR_VOLTAGE,
658                         .id             = AB8500_LDO_AUX1,
659                         .owner          = THIS_MODULE,
660                         .n_voltages     = ARRAY_SIZE(ldo_vauxn_voltages),
661                         .volt_table     = ldo_vauxn_voltages,
662                         .enable_time    = 200,
663                         .supply_name    = "vin",
664                 },
665                 .load_lp_uA             = 5000,
666                 .update_bank            = 0x04,
667                 .update_reg             = 0x09,
668                 .update_mask            = 0x03,
669                 .update_val             = 0x01,
670                 .update_val_idle        = 0x03,
671                 .update_val_normal      = 0x01,
672                 .voltage_bank           = 0x04,
673                 .voltage_reg            = 0x1f,
674                 .voltage_mask           = 0x0f,
675         },
676         [AB8500_LDO_AUX2] = {
677                 .desc = {
678                         .name           = "LDO-AUX2",
679                         .ops            = &ab8500_regulator_volt_mode_ops,
680                         .type           = REGULATOR_VOLTAGE,
681                         .id             = AB8500_LDO_AUX2,
682                         .owner          = THIS_MODULE,
683                         .n_voltages     = ARRAY_SIZE(ldo_vauxn_voltages),
684                         .volt_table     = ldo_vauxn_voltages,
685                         .enable_time    = 200,
686                         .supply_name    = "vin",
687                 },
688                 .load_lp_uA             = 5000,
689                 .update_bank            = 0x04,
690                 .update_reg             = 0x09,
691                 .update_mask            = 0x0c,
692                 .update_val             = 0x04,
693                 .update_val_idle        = 0x0c,
694                 .update_val_normal      = 0x04,
695                 .voltage_bank           = 0x04,
696                 .voltage_reg            = 0x20,
697                 .voltage_mask           = 0x0f,
698         },
699         [AB8500_LDO_AUX3] = {
700                 .desc = {
701                         .name           = "LDO-AUX3",
702                         .ops            = &ab8500_regulator_volt_mode_ops,
703                         .type           = REGULATOR_VOLTAGE,
704                         .id             = AB8500_LDO_AUX3,
705                         .owner          = THIS_MODULE,
706                         .n_voltages     = ARRAY_SIZE(ldo_vaux3_voltages),
707                         .volt_table     = ldo_vaux3_voltages,
708                         .enable_time    = 450,
709                         .supply_name    = "vin",
710                 },
711                 .load_lp_uA             = 5000,
712                 .update_bank            = 0x04,
713                 .update_reg             = 0x0a,
714                 .update_mask            = 0x03,
715                 .update_val             = 0x01,
716                 .update_val_idle        = 0x03,
717                 .update_val_normal      = 0x01,
718                 .voltage_bank           = 0x04,
719                 .voltage_reg            = 0x21,
720                 .voltage_mask           = 0x07,
721         },
722         [AB8500_LDO_INTCORE] = {
723                 .desc = {
724                         .name           = "LDO-INTCORE",
725                         .ops            = &ab8500_regulator_volt_mode_ops,
726                         .type           = REGULATOR_VOLTAGE,
727                         .id             = AB8500_LDO_INTCORE,
728                         .owner          = THIS_MODULE,
729                         .n_voltages     = ARRAY_SIZE(ldo_vintcore_voltages),
730                         .volt_table     = ldo_vintcore_voltages,
731                         .enable_time    = 750,
732                 },
733                 .load_lp_uA             = 5000,
734                 .update_bank            = 0x03,
735                 .update_reg             = 0x80,
736                 .update_mask            = 0x44,
737                 .update_val             = 0x44,
738                 .update_val_idle        = 0x44,
739                 .update_val_normal      = 0x04,
740                 .voltage_bank           = 0x03,
741                 .voltage_reg            = 0x80,
742                 .voltage_mask           = 0x38,
743         },
744
745         /*
746          * Fixed Voltage Regulators
747          *   name, fixed mV,
748          *   update bank, reg, mask, enable val
749          */
750         [AB8500_LDO_TVOUT] = {
751                 .desc = {
752                         .name           = "LDO-TVOUT",
753                         .ops            = &ab8500_regulator_mode_ops,
754                         .type           = REGULATOR_VOLTAGE,
755                         .id             = AB8500_LDO_TVOUT,
756                         .owner          = THIS_MODULE,
757                         .n_voltages     = 1,
758                         .volt_table     = fixed_2000000_voltage,
759                         .enable_time    = 500,
760                 },
761                 .load_lp_uA             = 1000,
762                 .update_bank            = 0x03,
763                 .update_reg             = 0x80,
764                 .update_mask            = 0x82,
765                 .update_val             = 0x02,
766                 .update_val_idle        = 0x82,
767                 .update_val_normal      = 0x02,
768         },
769         [AB8500_LDO_AUDIO] = {
770                 .desc = {
771                         .name           = "LDO-AUDIO",
772                         .ops            = &ab8500_regulator_ops,
773                         .type           = REGULATOR_VOLTAGE,
774                         .id             = AB8500_LDO_AUDIO,
775                         .owner          = THIS_MODULE,
776                         .n_voltages     = 1,
777                         .enable_time    = 140,
778                         .volt_table     = fixed_2000000_voltage,
779                 },
780                 .update_bank            = 0x03,
781                 .update_reg             = 0x83,
782                 .update_mask            = 0x02,
783                 .update_val             = 0x02,
784         },
785         [AB8500_LDO_ANAMIC1] = {
786                 .desc = {
787                         .name           = "LDO-ANAMIC1",
788                         .ops            = &ab8500_regulator_ops,
789                         .type           = REGULATOR_VOLTAGE,
790                         .id             = AB8500_LDO_ANAMIC1,
791                         .owner          = THIS_MODULE,
792                         .n_voltages     = 1,
793                         .enable_time    = 500,
794                         .volt_table     = fixed_2050000_voltage,
795                 },
796                 .update_bank            = 0x03,
797                 .update_reg             = 0x83,
798                 .update_mask            = 0x08,
799                 .update_val             = 0x08,
800         },
801         [AB8500_LDO_ANAMIC2] = {
802                 .desc = {
803                         .name           = "LDO-ANAMIC2",
804                         .ops            = &ab8500_regulator_ops,
805                         .type           = REGULATOR_VOLTAGE,
806                         .id             = AB8500_LDO_ANAMIC2,
807                         .owner          = THIS_MODULE,
808                         .n_voltages     = 1,
809                         .enable_time    = 500,
810                         .volt_table     = fixed_2050000_voltage,
811                 },
812                 .update_bank            = 0x03,
813                 .update_reg             = 0x83,
814                 .update_mask            = 0x10,
815                 .update_val             = 0x10,
816         },
817         [AB8500_LDO_DMIC] = {
818                 .desc = {
819                         .name           = "LDO-DMIC",
820                         .ops            = &ab8500_regulator_ops,
821                         .type           = REGULATOR_VOLTAGE,
822                         .id             = AB8500_LDO_DMIC,
823                         .owner          = THIS_MODULE,
824                         .n_voltages     = 1,
825                         .enable_time    = 420,
826                         .volt_table     = fixed_1800000_voltage,
827                 },
828                 .update_bank            = 0x03,
829                 .update_reg             = 0x83,
830                 .update_mask            = 0x04,
831                 .update_val             = 0x04,
832         },
833
834         /*
835          * Regulators with fixed voltage and normal/idle modes
836          */
837         [AB8500_LDO_ANA] = {
838                 .desc = {
839                         .name           = "LDO-ANA",
840                         .ops            = &ab8500_regulator_mode_ops,
841                         .type           = REGULATOR_VOLTAGE,
842                         .id             = AB8500_LDO_ANA,
843                         .owner          = THIS_MODULE,
844                         .n_voltages     = 1,
845                         .enable_time    = 140,
846                         .volt_table     = fixed_1200000_voltage,
847                 },
848                 .load_lp_uA             = 1000,
849                 .update_bank            = 0x04,
850                 .update_reg             = 0x06,
851                 .update_mask            = 0x0c,
852                 .update_val             = 0x04,
853                 .update_val_idle        = 0x0c,
854                 .update_val_normal      = 0x04,
855         },
856 };
857
858 /* AB8505 regulator information */
859 static struct ab8500_regulator_info
860                 ab8505_regulator_info[AB8505_NUM_REGULATORS] = {
861         /*
862          * Variable Voltage Regulators
863          *   name, min mV, max mV,
864          *   update bank, reg, mask, enable val
865          *   volt bank, reg, mask
866          */
867         [AB8505_LDO_AUX1] = {
868                 .desc = {
869                         .name           = "LDO-AUX1",
870                         .ops            = &ab8500_regulator_volt_mode_ops,
871                         .type           = REGULATOR_VOLTAGE,
872                         .id             = AB8505_LDO_AUX1,
873                         .owner          = THIS_MODULE,
874                         .n_voltages     = ARRAY_SIZE(ldo_vauxn_voltages),
875                         .volt_table     = ldo_vauxn_voltages,
876                 },
877                 .load_lp_uA             = 5000,
878                 .update_bank            = 0x04,
879                 .update_reg             = 0x09,
880                 .update_mask            = 0x03,
881                 .update_val             = 0x01,
882                 .update_val_idle        = 0x03,
883                 .update_val_normal      = 0x01,
884                 .voltage_bank           = 0x04,
885                 .voltage_reg            = 0x1f,
886                 .voltage_mask           = 0x0f,
887         },
888         [AB8505_LDO_AUX2] = {
889                 .desc = {
890                         .name           = "LDO-AUX2",
891                         .ops            = &ab8500_regulator_volt_mode_ops,
892                         .type           = REGULATOR_VOLTAGE,
893                         .id             = AB8505_LDO_AUX2,
894                         .owner          = THIS_MODULE,
895                         .n_voltages     = ARRAY_SIZE(ldo_vauxn_voltages),
896                         .volt_table     = ldo_vauxn_voltages,
897                 },
898                 .load_lp_uA             = 5000,
899                 .update_bank            = 0x04,
900                 .update_reg             = 0x09,
901                 .update_mask            = 0x0c,
902                 .update_val             = 0x04,
903                 .update_val_idle        = 0x0c,
904                 .update_val_normal      = 0x04,
905                 .voltage_bank           = 0x04,
906                 .voltage_reg            = 0x20,
907                 .voltage_mask           = 0x0f,
908         },
909         [AB8505_LDO_AUX3] = {
910                 .desc = {
911                         .name           = "LDO-AUX3",
912                         .ops            = &ab8500_regulator_volt_mode_ops,
913                         .type           = REGULATOR_VOLTAGE,
914                         .id             = AB8505_LDO_AUX3,
915                         .owner          = THIS_MODULE,
916                         .n_voltages     = ARRAY_SIZE(ldo_vaux3_voltages),
917                         .volt_table     = ldo_vaux3_voltages,
918                 },
919                 .load_lp_uA             = 5000,
920                 .update_bank            = 0x04,
921                 .update_reg             = 0x0a,
922                 .update_mask            = 0x03,
923                 .update_val             = 0x01,
924                 .update_val_idle        = 0x03,
925                 .update_val_normal      = 0x01,
926                 .voltage_bank           = 0x04,
927                 .voltage_reg            = 0x21,
928                 .voltage_mask           = 0x07,
929         },
930         [AB8505_LDO_AUX4] = {
931                 .desc = {
932                         .name           = "LDO-AUX4",
933                         .ops            = &ab8500_regulator_volt_mode_ops,
934                         .type           = REGULATOR_VOLTAGE,
935                         .id             = AB8505_LDO_AUX4,
936                         .owner          = THIS_MODULE,
937                         .n_voltages     = ARRAY_SIZE(ldo_vauxn_voltages),
938                         .volt_table     = ldo_vauxn_voltages,
939                 },
940                 .load_lp_uA             = 5000,
941                 /* values for Vaux4Regu register */
942                 .update_bank            = 0x04,
943                 .update_reg             = 0x2e,
944                 .update_mask            = 0x03,
945                 .update_val             = 0x01,
946                 .update_val_idle        = 0x03,
947                 .update_val_normal      = 0x01,
948                 /* values for Vaux4SEL register */
949                 .voltage_bank           = 0x04,
950                 .voltage_reg            = 0x2f,
951                 .voltage_mask           = 0x0f,
952         },
953         [AB8505_LDO_AUX5] = {
954                 .desc = {
955                         .name           = "LDO-AUX5",
956                         .ops            = &ab8500_regulator_volt_mode_ops,
957                         .type           = REGULATOR_VOLTAGE,
958                         .id             = AB8505_LDO_AUX5,
959                         .owner          = THIS_MODULE,
960                         .n_voltages     = ARRAY_SIZE(ldo_vaux56_voltages),
961                         .volt_table     = ldo_vaux56_voltages,
962                 },
963                 .load_lp_uA             = 2000,
964                 /* values for CtrlVaux5 register */
965                 .update_bank            = 0x01,
966                 .update_reg             = 0x55,
967                 .update_mask            = 0x18,
968                 .update_val             = 0x10,
969                 .update_val_idle        = 0x18,
970                 .update_val_normal      = 0x10,
971                 .voltage_bank           = 0x01,
972                 .voltage_reg            = 0x55,
973                 .voltage_mask           = 0x07,
974         },
975         [AB8505_LDO_AUX6] = {
976                 .desc = {
977                         .name           = "LDO-AUX6",
978                         .ops            = &ab8500_regulator_volt_mode_ops,
979                         .type           = REGULATOR_VOLTAGE,
980                         .id             = AB8505_LDO_AUX6,
981                         .owner          = THIS_MODULE,
982                         .n_voltages     = ARRAY_SIZE(ldo_vaux56_voltages),
983                         .volt_table     = ldo_vaux56_voltages,
984                 },
985                 .load_lp_uA             = 2000,
986                 /* values for CtrlVaux6 register */
987                 .update_bank            = 0x01,
988                 .update_reg             = 0x56,
989                 .update_mask            = 0x18,
990                 .update_val             = 0x10,
991                 .update_val_idle        = 0x18,
992                 .update_val_normal      = 0x10,
993                 .voltage_bank           = 0x01,
994                 .voltage_reg            = 0x56,
995                 .voltage_mask           = 0x07,
996         },
997         [AB8505_LDO_INTCORE] = {
998                 .desc = {
999                         .name           = "LDO-INTCORE",
1000                         .ops            = &ab8500_regulator_volt_mode_ops,
1001                         .type           = REGULATOR_VOLTAGE,
1002                         .id             = AB8505_LDO_INTCORE,
1003                         .owner          = THIS_MODULE,
1004                         .n_voltages     = ARRAY_SIZE(ldo_vintcore_voltages),
1005                         .volt_table     = ldo_vintcore_voltages,
1006                 },
1007                 .load_lp_uA             = 5000,
1008                 .update_bank            = 0x03,
1009                 .update_reg             = 0x80,
1010                 .update_mask            = 0x44,
1011                 .update_val             = 0x04,
1012                 .update_val_idle        = 0x44,
1013                 .update_val_normal      = 0x04,
1014                 .voltage_bank           = 0x03,
1015                 .voltage_reg            = 0x80,
1016                 .voltage_mask           = 0x38,
1017         },
1018
1019         /*
1020          * Fixed Voltage Regulators
1021          *   name, fixed mV,
1022          *   update bank, reg, mask, enable val
1023          */
1024         [AB8505_LDO_ADC] = {
1025                 .desc = {
1026                         .name           = "LDO-ADC",
1027                         .ops            = &ab8500_regulator_mode_ops,
1028                         .type           = REGULATOR_VOLTAGE,
1029                         .id             = AB8505_LDO_ADC,
1030                         .owner          = THIS_MODULE,
1031                         .n_voltages     = 1,
1032                         .volt_table     = fixed_2000000_voltage,
1033                         .enable_time    = 10000,
1034                 },
1035                 .load_lp_uA             = 1000,
1036                 .update_bank            = 0x03,
1037                 .update_reg             = 0x80,
1038                 .update_mask            = 0x82,
1039                 .update_val             = 0x02,
1040                 .update_val_idle        = 0x82,
1041                 .update_val_normal      = 0x02,
1042         },
1043         [AB8505_LDO_AUDIO] = {
1044                 .desc = {
1045                         .name           = "LDO-AUDIO",
1046                         .ops            = &ab8500_regulator_volt_ops,
1047                         .type           = REGULATOR_VOLTAGE,
1048                         .id             = AB8505_LDO_AUDIO,
1049                         .owner          = THIS_MODULE,
1050                         .n_voltages     = ARRAY_SIZE(ldo_vaudio_voltages),
1051                         .volt_table     = ldo_vaudio_voltages,
1052                 },
1053                 .update_bank            = 0x03,
1054                 .update_reg             = 0x83,
1055                 .update_mask            = 0x02,
1056                 .update_val             = 0x02,
1057                 .voltage_bank           = 0x01,
1058                 .voltage_reg            = 0x57,
1059                 .voltage_mask           = 0x70,
1060         },
1061         [AB8505_LDO_ANAMIC1] = {
1062                 .desc = {
1063                         .name           = "LDO-ANAMIC1",
1064                         .ops            = &ab8500_regulator_anamic_mode_ops,
1065                         .type           = REGULATOR_VOLTAGE,
1066                         .id             = AB8505_LDO_ANAMIC1,
1067                         .owner          = THIS_MODULE,
1068                         .n_voltages     = 1,
1069                         .volt_table     = fixed_2050000_voltage,
1070                 },
1071                 .shared_mode            = &ldo_anamic1_shared,
1072                 .update_bank            = 0x03,
1073                 .update_reg             = 0x83,
1074                 .update_mask            = 0x08,
1075                 .update_val             = 0x08,
1076                 .mode_bank              = 0x01,
1077                 .mode_reg               = 0x54,
1078                 .mode_mask              = 0x04,
1079                 .mode_val_idle          = 0x04,
1080                 .mode_val_normal        = 0x00,
1081         },
1082         [AB8505_LDO_ANAMIC2] = {
1083                 .desc = {
1084                         .name           = "LDO-ANAMIC2",
1085                         .ops            = &ab8500_regulator_anamic_mode_ops,
1086                         .type           = REGULATOR_VOLTAGE,
1087                         .id             = AB8505_LDO_ANAMIC2,
1088                         .owner          = THIS_MODULE,
1089                         .n_voltages     = 1,
1090                         .volt_table     = fixed_2050000_voltage,
1091                 },
1092                 .shared_mode            = &ldo_anamic2_shared,
1093                 .update_bank            = 0x03,
1094                 .update_reg             = 0x83,
1095                 .update_mask            = 0x10,
1096                 .update_val             = 0x10,
1097                 .mode_bank              = 0x01,
1098                 .mode_reg               = 0x54,
1099                 .mode_mask              = 0x04,
1100                 .mode_val_idle          = 0x04,
1101                 .mode_val_normal        = 0x00,
1102         },
1103         [AB8505_LDO_AUX8] = {
1104                 .desc = {
1105                         .name           = "LDO-AUX8",
1106                         .ops            = &ab8500_regulator_ops,
1107                         .type           = REGULATOR_VOLTAGE,
1108                         .id             = AB8505_LDO_AUX8,
1109                         .owner          = THIS_MODULE,
1110                         .n_voltages     = 1,
1111                         .volt_table     = fixed_1800000_voltage,
1112                 },
1113                 .update_bank            = 0x03,
1114                 .update_reg             = 0x83,
1115                 .update_mask            = 0x04,
1116                 .update_val             = 0x04,
1117         },
1118         /*
1119          * Regulators with fixed voltage and normal/idle modes
1120          */
1121         [AB8505_LDO_ANA] = {
1122                 .desc = {
1123                         .name           = "LDO-ANA",
1124                         .ops            = &ab8500_regulator_volt_mode_ops,
1125                         .type           = REGULATOR_VOLTAGE,
1126                         .id             = AB8505_LDO_ANA,
1127                         .owner          = THIS_MODULE,
1128                         .n_voltages     = ARRAY_SIZE(ldo_vana_voltages),
1129                         .volt_table     = ldo_vana_voltages,
1130                 },
1131                 .load_lp_uA             = 1000,
1132                 .update_bank            = 0x04,
1133                 .update_reg             = 0x06,
1134                 .update_mask            = 0x0c,
1135                 .update_val             = 0x04,
1136                 .update_val_idle        = 0x0c,
1137                 .update_val_normal      = 0x04,
1138                 .voltage_bank           = 0x04,
1139                 .voltage_reg            = 0x29,
1140                 .voltage_mask           = 0x7,
1141         },
1142 };
1143
1144 static struct ab8500_shared_mode ldo_anamic1_shared = {
1145         .shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC2],
1146 };
1147
1148 static struct ab8500_shared_mode ldo_anamic2_shared = {
1149         .shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC1],
1150 };
1151
1152 struct ab8500_reg_init {
1153         u8 bank;
1154         u8 addr;
1155         u8 mask;
1156 };
1157
1158 #define REG_INIT(_id, _bank, _addr, _mask)      \
1159         [_id] = {                               \
1160                 .bank = _bank,                  \
1161                 .addr = _addr,                  \
1162                 .mask = _mask,                  \
1163         }
1164
1165 /* AB8500 register init */
1166 static struct ab8500_reg_init ab8500_reg_init[] = {
1167         /*
1168          * 0x30, VanaRequestCtrl
1169          * 0xc0, VextSupply1RequestCtrl
1170          */
1171         REG_INIT(AB8500_REGUREQUESTCTRL2,       0x03, 0x04, 0xf0),
1172         /*
1173          * 0x03, VextSupply2RequestCtrl
1174          * 0x0c, VextSupply3RequestCtrl
1175          * 0x30, Vaux1RequestCtrl
1176          * 0xc0, Vaux2RequestCtrl
1177          */
1178         REG_INIT(AB8500_REGUREQUESTCTRL3,       0x03, 0x05, 0xff),
1179         /*
1180          * 0x03, Vaux3RequestCtrl
1181          * 0x04, SwHPReq
1182          */
1183         REG_INIT(AB8500_REGUREQUESTCTRL4,       0x03, 0x06, 0x07),
1184         /*
1185          * 0x08, VanaSysClkReq1HPValid
1186          * 0x20, Vaux1SysClkReq1HPValid
1187          * 0x40, Vaux2SysClkReq1HPValid
1188          * 0x80, Vaux3SysClkReq1HPValid
1189          */
1190         REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xe8),
1191         /*
1192          * 0x10, VextSupply1SysClkReq1HPValid
1193          * 0x20, VextSupply2SysClkReq1HPValid
1194          * 0x40, VextSupply3SysClkReq1HPValid
1195          */
1196         REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x70),
1197         /*
1198          * 0x08, VanaHwHPReq1Valid
1199          * 0x20, Vaux1HwHPReq1Valid
1200          * 0x40, Vaux2HwHPReq1Valid
1201          * 0x80, Vaux3HwHPReq1Valid
1202          */
1203         REG_INIT(AB8500_REGUHWHPREQ1VALID1,     0x03, 0x09, 0xe8),
1204         /*
1205          * 0x01, VextSupply1HwHPReq1Valid
1206          * 0x02, VextSupply2HwHPReq1Valid
1207          * 0x04, VextSupply3HwHPReq1Valid
1208          */
1209         REG_INIT(AB8500_REGUHWHPREQ1VALID2,     0x03, 0x0a, 0x07),
1210         /*
1211          * 0x08, VanaHwHPReq2Valid
1212          * 0x20, Vaux1HwHPReq2Valid
1213          * 0x40, Vaux2HwHPReq2Valid
1214          * 0x80, Vaux3HwHPReq2Valid
1215          */
1216         REG_INIT(AB8500_REGUHWHPREQ2VALID1,     0x03, 0x0b, 0xe8),
1217         /*
1218          * 0x01, VextSupply1HwHPReq2Valid
1219          * 0x02, VextSupply2HwHPReq2Valid
1220          * 0x04, VextSupply3HwHPReq2Valid
1221          */
1222         REG_INIT(AB8500_REGUHWHPREQ2VALID2,     0x03, 0x0c, 0x07),
1223         /*
1224          * 0x20, VanaSwHPReqValid
1225          * 0x80, Vaux1SwHPReqValid
1226          */
1227         REG_INIT(AB8500_REGUSWHPREQVALID1,      0x03, 0x0d, 0xa0),
1228         /*
1229          * 0x01, Vaux2SwHPReqValid
1230          * 0x02, Vaux3SwHPReqValid
1231          * 0x04, VextSupply1SwHPReqValid
1232          * 0x08, VextSupply2SwHPReqValid
1233          * 0x10, VextSupply3SwHPReqValid
1234          */
1235         REG_INIT(AB8500_REGUSWHPREQVALID2,      0x03, 0x0e, 0x1f),
1236         /*
1237          * 0x02, SysClkReq2Valid1
1238          * 0x04, SysClkReq3Valid1
1239          * 0x08, SysClkReq4Valid1
1240          * 0x10, SysClkReq5Valid1
1241          * 0x20, SysClkReq6Valid1
1242          * 0x40, SysClkReq7Valid1
1243          * 0x80, SysClkReq8Valid1
1244          */
1245         REG_INIT(AB8500_REGUSYSCLKREQVALID1,    0x03, 0x0f, 0xfe),
1246         /*
1247          * 0x02, SysClkReq2Valid2
1248          * 0x04, SysClkReq3Valid2
1249          * 0x08, SysClkReq4Valid2
1250          * 0x10, SysClkReq5Valid2
1251          * 0x20, SysClkReq6Valid2
1252          * 0x40, SysClkReq7Valid2
1253          * 0x80, SysClkReq8Valid2
1254          */
1255         REG_INIT(AB8500_REGUSYSCLKREQVALID2,    0x03, 0x10, 0xfe),
1256         /*
1257          * 0x02, VTVoutEna
1258          * 0x04, Vintcore12Ena
1259          * 0x38, Vintcore12Sel
1260          * 0x40, Vintcore12LP
1261          * 0x80, VTVoutLP
1262          */
1263         REG_INIT(AB8500_REGUMISC1,              0x03, 0x80, 0xfe),
1264         /*
1265          * 0x02, VaudioEna
1266          * 0x04, VdmicEna
1267          * 0x08, Vamic1Ena
1268          * 0x10, Vamic2Ena
1269          */
1270         REG_INIT(AB8500_VAUDIOSUPPLY,           0x03, 0x83, 0x1e),
1271         /*
1272          * 0x01, Vamic1_dzout
1273          * 0x02, Vamic2_dzout
1274          */
1275         REG_INIT(AB8500_REGUCTRL1VAMIC,         0x03, 0x84, 0x03),
1276         /*
1277          * 0x03, VpllRegu (NOTE! PRCMU register bits)
1278          * 0x0c, VanaRegu
1279          */
1280         REG_INIT(AB8500_VPLLVANAREGU,           0x04, 0x06, 0x0f),
1281         /*
1282          * 0x01, VrefDDREna
1283          * 0x02, VrefDDRSleepMode
1284          */
1285         REG_INIT(AB8500_VREFDDR,                0x04, 0x07, 0x03),
1286         /*
1287          * 0x03, VextSupply1Regu
1288          * 0x0c, VextSupply2Regu
1289          * 0x30, VextSupply3Regu
1290          * 0x40, ExtSupply2Bypass
1291          * 0x80, ExtSupply3Bypass
1292          */
1293         REG_INIT(AB8500_EXTSUPPLYREGU,          0x04, 0x08, 0xff),
1294         /*
1295          * 0x03, Vaux1Regu
1296          * 0x0c, Vaux2Regu
1297          */
1298         REG_INIT(AB8500_VAUX12REGU,             0x04, 0x09, 0x0f),
1299         /*
1300          * 0x03, Vaux3Regu
1301          */
1302         REG_INIT(AB8500_VRF1VAUX3REGU,          0x04, 0x0a, 0x03),
1303         /*
1304          * 0x0f, Vaux1Sel
1305          */
1306         REG_INIT(AB8500_VAUX1SEL,               0x04, 0x1f, 0x0f),
1307         /*
1308          * 0x0f, Vaux2Sel
1309          */
1310         REG_INIT(AB8500_VAUX2SEL,               0x04, 0x20, 0x0f),
1311         /*
1312          * 0x07, Vaux3Sel
1313          */
1314         REG_INIT(AB8500_VRF1VAUX3SEL,           0x04, 0x21, 0x07),
1315         /*
1316          * 0x01, VextSupply12LP
1317          */
1318         REG_INIT(AB8500_REGUCTRL2SPARE,         0x04, 0x22, 0x01),
1319         /*
1320          * 0x04, Vaux1Disch
1321          * 0x08, Vaux2Disch
1322          * 0x10, Vaux3Disch
1323          * 0x20, Vintcore12Disch
1324          * 0x40, VTVoutDisch
1325          * 0x80, VaudioDisch
1326          */
1327         REG_INIT(AB8500_REGUCTRLDISCH,          0x04, 0x43, 0xfc),
1328         /*
1329          * 0x02, VanaDisch
1330          * 0x04, VdmicPullDownEna
1331          * 0x10, VdmicDisch
1332          */
1333         REG_INIT(AB8500_REGUCTRLDISCH2,         0x04, 0x44, 0x16),
1334 };
1335
1336 /* AB8505 register init */
1337 static struct ab8500_reg_init ab8505_reg_init[] = {
1338         /*
1339          * 0x03, VarmRequestCtrl
1340          * 0x0c, VsmpsCRequestCtrl
1341          * 0x30, VsmpsARequestCtrl
1342          * 0xc0, VsmpsBRequestCtrl
1343          */
1344         REG_INIT(AB8505_REGUREQUESTCTRL1,       0x03, 0x03, 0xff),
1345         /*
1346          * 0x03, VsafeRequestCtrl
1347          * 0x0c, VpllRequestCtrl
1348          * 0x30, VanaRequestCtrl
1349          */
1350         REG_INIT(AB8505_REGUREQUESTCTRL2,       0x03, 0x04, 0x3f),
1351         /*
1352          * 0x30, Vaux1RequestCtrl
1353          * 0xc0, Vaux2RequestCtrl
1354          */
1355         REG_INIT(AB8505_REGUREQUESTCTRL3,       0x03, 0x05, 0xf0),
1356         /*
1357          * 0x03, Vaux3RequestCtrl
1358          * 0x04, SwHPReq
1359          */
1360         REG_INIT(AB8505_REGUREQUESTCTRL4,       0x03, 0x06, 0x07),
1361         /*
1362          * 0x01, VsmpsASysClkReq1HPValid
1363          * 0x02, VsmpsBSysClkReq1HPValid
1364          * 0x04, VsafeSysClkReq1HPValid
1365          * 0x08, VanaSysClkReq1HPValid
1366          * 0x10, VpllSysClkReq1HPValid
1367          * 0x20, Vaux1SysClkReq1HPValid
1368          * 0x40, Vaux2SysClkReq1HPValid
1369          * 0x80, Vaux3SysClkReq1HPValid
1370          */
1371         REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff),
1372         /*
1373          * 0x01, VsmpsCSysClkReq1HPValid
1374          * 0x02, VarmSysClkReq1HPValid
1375          * 0x04, VbbSysClkReq1HPValid
1376          * 0x08, VsmpsMSysClkReq1HPValid
1377          */
1378         REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x0f),
1379         /*
1380          * 0x01, VsmpsAHwHPReq1Valid
1381          * 0x02, VsmpsBHwHPReq1Valid
1382          * 0x04, VsafeHwHPReq1Valid
1383          * 0x08, VanaHwHPReq1Valid
1384          * 0x10, VpllHwHPReq1Valid
1385          * 0x20, Vaux1HwHPReq1Valid
1386          * 0x40, Vaux2HwHPReq1Valid
1387          * 0x80, Vaux3HwHPReq1Valid
1388          */
1389         REG_INIT(AB8505_REGUHWHPREQ1VALID1,     0x03, 0x09, 0xff),
1390         /*
1391          * 0x08, VsmpsMHwHPReq1Valid
1392          */
1393         REG_INIT(AB8505_REGUHWHPREQ1VALID2,     0x03, 0x0a, 0x08),
1394         /*
1395          * 0x01, VsmpsAHwHPReq2Valid
1396          * 0x02, VsmpsBHwHPReq2Valid
1397          * 0x04, VsafeHwHPReq2Valid
1398          * 0x08, VanaHwHPReq2Valid
1399          * 0x10, VpllHwHPReq2Valid
1400          * 0x20, Vaux1HwHPReq2Valid
1401          * 0x40, Vaux2HwHPReq2Valid
1402          * 0x80, Vaux3HwHPReq2Valid
1403          */
1404         REG_INIT(AB8505_REGUHWHPREQ2VALID1,     0x03, 0x0b, 0xff),
1405         /*
1406          * 0x08, VsmpsMHwHPReq2Valid
1407          */
1408         REG_INIT(AB8505_REGUHWHPREQ2VALID2,     0x03, 0x0c, 0x08),
1409         /*
1410          * 0x01, VsmpsCSwHPReqValid
1411          * 0x02, VarmSwHPReqValid
1412          * 0x04, VsmpsASwHPReqValid
1413          * 0x08, VsmpsBSwHPReqValid
1414          * 0x10, VsafeSwHPReqValid
1415          * 0x20, VanaSwHPReqValid
1416          * 0x40, VpllSwHPReqValid
1417          * 0x80, Vaux1SwHPReqValid
1418          */
1419         REG_INIT(AB8505_REGUSWHPREQVALID1,      0x03, 0x0d, 0xff),
1420         /*
1421          * 0x01, Vaux2SwHPReqValid
1422          * 0x02, Vaux3SwHPReqValid
1423          * 0x20, VsmpsMSwHPReqValid
1424          */
1425         REG_INIT(AB8505_REGUSWHPREQVALID2,      0x03, 0x0e, 0x23),
1426         /*
1427          * 0x02, SysClkReq2Valid1
1428          * 0x04, SysClkReq3Valid1
1429          * 0x08, SysClkReq4Valid1
1430          */
1431         REG_INIT(AB8505_REGUSYSCLKREQVALID1,    0x03, 0x0f, 0x0e),
1432         /*
1433          * 0x02, SysClkReq2Valid2
1434          * 0x04, SysClkReq3Valid2
1435          * 0x08, SysClkReq4Valid2
1436          */
1437         REG_INIT(AB8505_REGUSYSCLKREQVALID2,    0x03, 0x10, 0x0e),
1438         /*
1439          * 0x01, Vaux4SwHPReqValid
1440          * 0x02, Vaux4HwHPReq2Valid
1441          * 0x04, Vaux4HwHPReq1Valid
1442          * 0x08, Vaux4SysClkReq1HPValid
1443          */
1444         REG_INIT(AB8505_REGUVAUX4REQVALID,      0x03, 0x11, 0x0f),
1445         /*
1446          * 0x02, VadcEna
1447          * 0x04, VintCore12Ena
1448          * 0x38, VintCore12Sel
1449          * 0x40, VintCore12LP
1450          * 0x80, VadcLP
1451          */
1452         REG_INIT(AB8505_REGUMISC1,              0x03, 0x80, 0xfe),
1453         /*
1454          * 0x02, VaudioEna
1455          * 0x04, VdmicEna
1456          * 0x08, Vamic1Ena
1457          * 0x10, Vamic2Ena
1458          */
1459         REG_INIT(AB8505_VAUDIOSUPPLY,           0x03, 0x83, 0x1e),
1460         /*
1461          * 0x01, Vamic1_dzout
1462          * 0x02, Vamic2_dzout
1463          */
1464         REG_INIT(AB8505_REGUCTRL1VAMIC,         0x03, 0x84, 0x03),
1465         /*
1466          * 0x03, VsmpsARegu
1467          * 0x0c, VsmpsASelCtrl
1468          * 0x10, VsmpsAAutoMode
1469          * 0x20, VsmpsAPWMMode
1470          */
1471         REG_INIT(AB8505_VSMPSAREGU,             0x04, 0x03, 0x3f),
1472         /*
1473          * 0x03, VsmpsBRegu
1474          * 0x0c, VsmpsBSelCtrl
1475          * 0x10, VsmpsBAutoMode
1476          * 0x20, VsmpsBPWMMode
1477          */
1478         REG_INIT(AB8505_VSMPSBREGU,             0x04, 0x04, 0x3f),
1479         /*
1480          * 0x03, VsafeRegu
1481          * 0x0c, VsafeSelCtrl
1482          * 0x10, VsafeAutoMode
1483          * 0x20, VsafePWMMode
1484          */
1485         REG_INIT(AB8505_VSAFEREGU,              0x04, 0x05, 0x3f),
1486         /*
1487          * 0x03, VpllRegu (NOTE! PRCMU register bits)
1488          * 0x0c, VanaRegu
1489          */
1490         REG_INIT(AB8505_VPLLVANAREGU,           0x04, 0x06, 0x0f),
1491         /*
1492          * 0x03, VextSupply1Regu
1493          * 0x0c, VextSupply2Regu
1494          * 0x30, VextSupply3Regu
1495          * 0x40, ExtSupply2Bypass
1496          * 0x80, ExtSupply3Bypass
1497          */
1498         REG_INIT(AB8505_EXTSUPPLYREGU,          0x04, 0x08, 0xff),
1499         /*
1500          * 0x03, Vaux1Regu
1501          * 0x0c, Vaux2Regu
1502          */
1503         REG_INIT(AB8505_VAUX12REGU,             0x04, 0x09, 0x0f),
1504         /*
1505          * 0x0f, Vaux3Regu
1506          */
1507         REG_INIT(AB8505_VRF1VAUX3REGU,          0x04, 0x0a, 0x0f),
1508         /*
1509          * 0x3f, VsmpsASel1
1510          */
1511         REG_INIT(AB8505_VSMPSASEL1,             0x04, 0x13, 0x3f),
1512         /*
1513          * 0x3f, VsmpsASel2
1514          */
1515         REG_INIT(AB8505_VSMPSASEL2,             0x04, 0x14, 0x3f),
1516         /*
1517          * 0x3f, VsmpsASel3
1518          */
1519         REG_INIT(AB8505_VSMPSASEL3,             0x04, 0x15, 0x3f),
1520         /*
1521          * 0x3f, VsmpsBSel1
1522          */
1523         REG_INIT(AB8505_VSMPSBSEL1,             0x04, 0x17, 0x3f),
1524         /*
1525          * 0x3f, VsmpsBSel2
1526          */
1527         REG_INIT(AB8505_VSMPSBSEL2,             0x04, 0x18, 0x3f),
1528         /*
1529          * 0x3f, VsmpsBSel3
1530          */
1531         REG_INIT(AB8505_VSMPSBSEL3,             0x04, 0x19, 0x3f),
1532         /*
1533          * 0x7f, VsafeSel1
1534          */
1535         REG_INIT(AB8505_VSAFESEL1,              0x04, 0x1b, 0x7f),
1536         /*
1537          * 0x3f, VsafeSel2
1538          */
1539         REG_INIT(AB8505_VSAFESEL2,              0x04, 0x1c, 0x7f),
1540         /*
1541          * 0x3f, VsafeSel3
1542          */
1543         REG_INIT(AB8505_VSAFESEL3,              0x04, 0x1d, 0x7f),
1544         /*
1545          * 0x0f, Vaux1Sel
1546          */
1547         REG_INIT(AB8505_VAUX1SEL,               0x04, 0x1f, 0x0f),
1548         /*
1549          * 0x0f, Vaux2Sel
1550          */
1551         REG_INIT(AB8505_VAUX2SEL,               0x04, 0x20, 0x0f),
1552         /*
1553          * 0x07, Vaux3Sel
1554          * 0x30, VRF1Sel
1555          */
1556         REG_INIT(AB8505_VRF1VAUX3SEL,           0x04, 0x21, 0x37),
1557         /*
1558          * 0x03, Vaux4RequestCtrl
1559          */
1560         REG_INIT(AB8505_VAUX4REQCTRL,           0x04, 0x2d, 0x03),
1561         /*
1562          * 0x03, Vaux4Regu
1563          */
1564         REG_INIT(AB8505_VAUX4REGU,              0x04, 0x2e, 0x03),
1565         /*
1566          * 0x0f, Vaux4Sel
1567          */
1568         REG_INIT(AB8505_VAUX4SEL,               0x04, 0x2f, 0x0f),
1569         /*
1570          * 0x04, Vaux1Disch
1571          * 0x08, Vaux2Disch
1572          * 0x10, Vaux3Disch
1573          * 0x20, Vintcore12Disch
1574          * 0x40, VTVoutDisch
1575          * 0x80, VaudioDisch
1576          */
1577         REG_INIT(AB8505_REGUCTRLDISCH,          0x04, 0x43, 0xfc),
1578         /*
1579          * 0x02, VanaDisch
1580          * 0x04, VdmicPullDownEna
1581          * 0x10, VdmicDisch
1582          */
1583         REG_INIT(AB8505_REGUCTRLDISCH2,         0x04, 0x44, 0x16),
1584         /*
1585          * 0x01, Vaux4Disch
1586          */
1587         REG_INIT(AB8505_REGUCTRLDISCH3,         0x04, 0x48, 0x01),
1588         /*
1589          * 0x07, Vaux5Sel
1590          * 0x08, Vaux5LP
1591          * 0x10, Vaux5Ena
1592          * 0x20, Vaux5Disch
1593          * 0x40, Vaux5DisSfst
1594          * 0x80, Vaux5DisPulld
1595          */
1596         REG_INIT(AB8505_CTRLVAUX5,              0x01, 0x55, 0xff),
1597         /*
1598          * 0x07, Vaux6Sel
1599          * 0x08, Vaux6LP
1600          * 0x10, Vaux6Ena
1601          * 0x80, Vaux6DisPulld
1602          */
1603         REG_INIT(AB8505_CTRLVAUX6,              0x01, 0x56, 0x9f),
1604 };
1605
1606 static struct of_regulator_match ab8500_regulator_match[] = {
1607         { .name = "ab8500_ldo_aux1",    .driver_data = (void *) AB8500_LDO_AUX1, },
1608         { .name = "ab8500_ldo_aux2",    .driver_data = (void *) AB8500_LDO_AUX2, },
1609         { .name = "ab8500_ldo_aux3",    .driver_data = (void *) AB8500_LDO_AUX3, },
1610         { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
1611         { .name = "ab8500_ldo_tvout",   .driver_data = (void *) AB8500_LDO_TVOUT, },
1612         { .name = "ab8500_ldo_audio",   .driver_data = (void *) AB8500_LDO_AUDIO, },
1613         { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
1614         { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
1615         { .name = "ab8500_ldo_dmic",    .driver_data = (void *) AB8500_LDO_DMIC, },
1616         { .name = "ab8500_ldo_ana",     .driver_data = (void *) AB8500_LDO_ANA, },
1617 };
1618
1619 static struct of_regulator_match ab8505_regulator_match[] = {
1620         { .name = "ab8500_ldo_aux1",    .driver_data = (void *) AB8505_LDO_AUX1, },
1621         { .name = "ab8500_ldo_aux2",    .driver_data = (void *) AB8505_LDO_AUX2, },
1622         { .name = "ab8500_ldo_aux3",    .driver_data = (void *) AB8505_LDO_AUX3, },
1623         { .name = "ab8500_ldo_aux4",    .driver_data = (void *) AB8505_LDO_AUX4, },
1624         { .name = "ab8500_ldo_aux5",    .driver_data = (void *) AB8505_LDO_AUX5, },
1625         { .name = "ab8500_ldo_aux6",    .driver_data = (void *) AB8505_LDO_AUX6, },
1626         { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8505_LDO_INTCORE, },
1627         { .name = "ab8500_ldo_adc",     .driver_data = (void *) AB8505_LDO_ADC, },
1628         { .name = "ab8500_ldo_audio",   .driver_data = (void *) AB8505_LDO_AUDIO, },
1629         { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8505_LDO_ANAMIC1, },
1630         { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, },
1631         { .name = "ab8500_ldo_aux8",    .driver_data = (void *) AB8505_LDO_AUX8, },
1632         { .name = "ab8500_ldo_ana",     .driver_data = (void *) AB8505_LDO_ANA, },
1633 };
1634
1635 static struct {
1636         struct ab8500_regulator_info *info;
1637         int info_size;
1638         struct ab8500_reg_init *init;
1639         int init_size;
1640         struct of_regulator_match *match;
1641         int match_size;
1642 } abx500_regulator;
1643
1644 static void abx500_get_regulator_info(struct ab8500 *ab8500)
1645 {
1646         if (is_ab8505(ab8500)) {
1647                 abx500_regulator.info = ab8505_regulator_info;
1648                 abx500_regulator.info_size = ARRAY_SIZE(ab8505_regulator_info);
1649                 abx500_regulator.init = ab8505_reg_init;
1650                 abx500_regulator.init_size = AB8505_NUM_REGULATOR_REGISTERS;
1651                 abx500_regulator.match = ab8505_regulator_match;
1652                 abx500_regulator.match_size = ARRAY_SIZE(ab8505_regulator_match);
1653         } else {
1654                 abx500_regulator.info = ab8500_regulator_info;
1655                 abx500_regulator.info_size = ARRAY_SIZE(ab8500_regulator_info);
1656                 abx500_regulator.init = ab8500_reg_init;
1657                 abx500_regulator.init_size = AB8500_NUM_REGULATOR_REGISTERS;
1658                 abx500_regulator.match = ab8500_regulator_match;
1659                 abx500_regulator.match_size = ARRAY_SIZE(ab8500_regulator_match);
1660         }
1661 }
1662
1663 static int ab8500_regulator_register(struct platform_device *pdev,
1664                                      struct regulator_init_data *init_data,
1665                                      int id, struct device_node *np)
1666 {
1667         struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
1668         struct ab8500_regulator_info *info = NULL;
1669         struct regulator_config config = { };
1670         struct regulator_dev *rdev;
1671
1672         /* assign per-regulator data */
1673         info = &abx500_regulator.info[id];
1674         info->dev = &pdev->dev;
1675
1676         config.dev = &pdev->dev;
1677         config.init_data = init_data;
1678         config.driver_data = info;
1679         config.of_node = np;
1680
1681         /* fix for hardware before ab8500v2.0 */
1682         if (is_ab8500_1p1_or_earlier(ab8500)) {
1683                 if (info->desc.id == AB8500_LDO_AUX3) {
1684                         info->desc.n_voltages =
1685                                 ARRAY_SIZE(ldo_vauxn_voltages);
1686                         info->desc.volt_table = ldo_vauxn_voltages;
1687                         info->voltage_mask = 0xf;
1688                 }
1689         }
1690
1691         /* register regulator with framework */
1692         rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
1693         if (IS_ERR(rdev)) {
1694                 dev_err(&pdev->dev, "failed to register regulator %s\n",
1695                         info->desc.name);
1696                 return PTR_ERR(rdev);
1697         }
1698
1699         return 0;
1700 }
1701
1702 static int ab8500_regulator_probe(struct platform_device *pdev)
1703 {
1704         struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
1705         struct device_node *np = pdev->dev.of_node;
1706         struct of_regulator_match *match;
1707         int err, i;
1708
1709         if (!ab8500) {
1710                 dev_err(&pdev->dev, "null mfd parent\n");
1711                 return -EINVAL;
1712         }
1713
1714         abx500_get_regulator_info(ab8500);
1715
1716         err = of_regulator_match(&pdev->dev, np,
1717                                  abx500_regulator.match,
1718                                  abx500_regulator.match_size);
1719         if (err < 0) {
1720                 dev_err(&pdev->dev,
1721                         "Error parsing regulator init data: %d\n", err);
1722                 return err;
1723         }
1724
1725         match = abx500_regulator.match;
1726         for (i = 0; i < abx500_regulator.info_size; i++) {
1727                 err = ab8500_regulator_register(pdev, match[i].init_data, i,
1728                                                 match[i].of_node);
1729                 if (err)
1730                         return err;
1731         }
1732
1733         return 0;
1734 }
1735
1736 static struct platform_driver ab8500_regulator_driver = {
1737         .probe = ab8500_regulator_probe,
1738         .driver         = {
1739                 .name   = "ab8500-regulator",
1740         },
1741 };
1742
1743 static int __init ab8500_regulator_init(void)
1744 {
1745         int ret;
1746
1747         ret = platform_driver_register(&ab8500_regulator_driver);
1748         if (ret != 0)
1749                 pr_err("Failed to register ab8500 regulator: %d\n", ret);
1750
1751         return ret;
1752 }
1753 subsys_initcall(ab8500_regulator_init);
1754
1755 static void __exit ab8500_regulator_exit(void)
1756 {
1757         platform_driver_unregister(&ab8500_regulator_driver);
1758 }
1759 module_exit(ab8500_regulator_exit);
1760
1761 MODULE_LICENSE("GPL v2");
1762 MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
1763 MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
1764 MODULE_AUTHOR("Daniel Willerud <daniel.willerud@stericsson.com>");
1765 MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
1766 MODULE_ALIAS("platform:ab8500-regulator");