drivers/regulator/ab8500-ext.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) ST-Ericsson SA 2010
   4  *
   5  * Authors: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
   6  *
   7  * This file is based on drivers/regulator/ab8500.c
   8  *
   9  * AB8500 external regulators
  10  *
  11  * ab8500-ext supports the following regulators:
  12  * - VextSupply3
  13  */
  14 #include <linux/init.h>
  15 #include <linux/kernel.h>
  16 #include <linux/err.h>
  17 #include <linux/module.h>
  18 #include <linux/of.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/regulator/driver.h>
  21 #include <linux/regulator/machine.h>
  22 #include <linux/regulator/of_regulator.h>
  23 #include <linux/mfd/abx500.h>
  24 #include <linux/mfd/abx500/ab8500.h>
  25
  26 /* AB8500 external regulators */
  27 enum ab8500_ext_regulator_id {
  28         AB8500_EXT_SUPPLY1,
  29         AB8500_EXT_SUPPLY2,
  30         AB8500_EXT_SUPPLY3,
  31         AB8500_NUM_EXT_REGULATORS,
  32 };
  33
  34 struct ab8500_ext_regulator_cfg {
  35         bool hwreq; /* requires hw mode or high power mode */
  36 };
  37
  38 /* supply for VextSupply3 */
  39 static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
  40         /* SIM supply for 3 V SIM cards */
  41         REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
  42 };
  43
  44 /*
  45  * AB8500 external regulators
  46  */
  47 static struct regulator_init_data ab8500_ext_regulators[] = {
  48         /* fixed Vbat supplies VSMPS1_EXT_1V8 */
  49         [AB8500_EXT_SUPPLY1] = {
  50                 .constraints = {
  51                         .name = "ab8500-ext-supply1",
  52                         .min_uV = 1800000,
  53                         .max_uV = 1800000,
  54                         .initial_mode = REGULATOR_MODE_IDLE,
  55                         .boot_on = 1,
  56                         .always_on = 1,
  57                 },
  58         },
  59         /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */
  60         [AB8500_EXT_SUPPLY2] = {
  61                 .constraints = {
  62                         .name = "ab8500-ext-supply2",
  63                         .min_uV = 1360000,
  64                         .max_uV = 1360000,
  65                 },
  66         },
  67         /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */
  68         [AB8500_EXT_SUPPLY3] = {
  69                 .constraints = {
  70                         .name = "ab8500-ext-supply3",
  71                         .min_uV = 3400000,
  72                         .max_uV = 3400000,
  73                         .valid_ops_mask = REGULATOR_CHANGE_STATUS,
  74                         .boot_on = 1,
  75                 },
  76                 .num_consumer_supplies =
  77                         ARRAY_SIZE(ab8500_ext_supply3_consumers),
  78                 .consumer_supplies = ab8500_ext_supply3_consumers,
  79         },
  80 };
  81
  82 /**
  83  * struct ab8500_ext_regulator_info - ab8500 regulator information
  84  * @dev: device pointer
  85  * @desc: regulator description
  86  * @cfg: regulator configuration (extension of regulator FW configuration)
  87  * @update_bank: bank to control on/off
  88  * @update_reg: register to control on/off
  89  * @update_mask: mask to enable/disable and set mode of regulator
  90  * @update_val: bits holding the regulator current mode
  91  * @update_val_hp: bits to set EN pin active (LPn pin deactive)
  92  *                 normally this means high power mode
  93  * @update_val_lp: bits to set EN pin active and LPn pin active
  94  *                 normally this means low power mode
  95  * @update_val_hw: bits to set regulator pins in HW control
  96  *                 SysClkReq pins and logic will choose mode
  97  */
  98 struct ab8500_ext_regulator_info {
  99         struct device *dev;
 100         struct regulator_desc desc;
 101         struct ab8500_ext_regulator_cfg *cfg;
 102         u8 update_bank;
 103         u8 update_reg;
 104         u8 update_mask;
 105         u8 update_val;
 106         u8 update_val_hp;
 107         u8 update_val_lp;
 108         u8 update_val_hw;
 109 };
 110
 111 static int ab8500_ext_regulator_enable(struct regulator_dev *rdev)
 112 {
 113         int ret;
 114         struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
 115         u8 regval;
 116
 117         if (info == NULL) {
 118                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 119                 return -EINVAL;
 120         }
 121
 122         /*
 123          * To satisfy both HW high power request and SW request, the regulator
 124          * must be on in high power.
 125          */
 126         if (info->cfg && info->cfg->hwreq)
 127                 regval = info->update_val_hp;
 128         else
 129                 regval = info->update_val;
 130
 131         ret = abx500_mask_and_set_register_interruptible(info->dev,
 132                 info->update_bank, info->update_reg,
 133                 info->update_mask, regval);
 134         if (ret < 0) {
 135                 dev_err(rdev_get_dev(rdev),
 136                         "couldn't set enable bits for regulator\n");
 137                 return ret;
 138         }
 139
 140         dev_dbg(rdev_get_dev(rdev),
 141                 "%s-enable (bank, reg, mask, value): 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
 142                 info->desc.name, info->update_bank, info->update_reg,
 143                 info->update_mask, regval);
 144
 145         return 0;
 146 }
 147
 148 static int ab8500_ext_regulator_disable(struct regulator_dev *rdev)
 149 {
 150         int ret;
 151         struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
 152         u8 regval;
 153
 154         if (info == NULL) {
 155                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 156                 return -EINVAL;
 157         }
 158
 159         /*
 160          * Set the regulator in HW request mode if configured
 161          */
 162         if (info->cfg && info->cfg->hwreq)
 163                 regval = info->update_val_hw;
 164         else
 165                 regval = 0;
 166
 167         ret = abx500_mask_and_set_register_interruptible(info->dev,
 168                 info->update_bank, info->update_reg,
 169                 info->update_mask, regval);
 170         if (ret < 0) {
 171                 dev_err(rdev_get_dev(rdev),
 172                         "couldn't set disable bits for regulator\n");
 173                 return ret;
 174         }
 175
 176         dev_dbg(rdev_get_dev(rdev), "%s-disable (bank, reg, mask, value):"
 177                 " 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
 178                 info->desc.name, info->update_bank, info->update_reg,
 179                 info->update_mask, regval);
 180
 181         return 0;
 182 }
 183
 184 static int ab8500_ext_regulator_is_enabled(struct regulator_dev *rdev)
 185 {
 186         int ret;
 187         struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
 188         u8 regval;
 189
 190         if (info == NULL) {
 191                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 192                 return -EINVAL;
 193         }
 194
 195         ret = abx500_get_register_interruptible(info->dev,
 196                 info->update_bank, info->update_reg, &regval);
 197         if (ret < 0) {
 198                 dev_err(rdev_get_dev(rdev),
 199                         "couldn't read 0x%x register\n", info->update_reg);
 200                 return ret;
 201         }
 202
 203         dev_dbg(rdev_get_dev(rdev), "%s-is_enabled (bank, reg, mask, value):"
 204                 " 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
 205                 info->desc.name, info->update_bank, info->update_reg,
 206                 info->update_mask, regval);
 207
 208         if (((regval & info->update_mask) == info->update_val_lp) ||
 209             ((regval & info->update_mask) == info->update_val_hp))
 210                 return 1;
 211         else
 212                 return 0;
 213 }
 214
 215 static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev,
 216                                          unsigned int mode)
 217 {
 218         int ret = 0;
 219         struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
 220         u8 regval;
 221
 222         if (info == NULL) {
 223                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 224                 return -EINVAL;
 225         }
 226
 227         switch (mode) {
 228         case REGULATOR_MODE_NORMAL:
 229                 regval = info->update_val_hp;
 230                 break;
 231         case REGULATOR_MODE_IDLE:
 232                 regval = info->update_val_lp;
 233                 break;
 234
 235         default:
 236                 return -EINVAL;
 237         }
 238
 239         /* If regulator is enabled and info->cfg->hwreq is set, the regulator
 240            must be on in high power, so we don't need to write the register with
 241            the same value.
 242          */
 243         if (ab8500_ext_regulator_is_enabled(rdev) &&
 244             !(info->cfg && info->cfg->hwreq)) {
 245                 ret = abx500_mask_and_set_register_interruptible(info->dev,
 246                                         info->update_bank, info->update_reg,
 247                                         info->update_mask, regval);
 248                 if (ret < 0) {
 249                         dev_err(rdev_get_dev(rdev),
 250                                 "Could not set regulator mode.\n");
 251                         return ret;
 252                 }
 253
 254                 dev_dbg(rdev_get_dev(rdev),
 255                         "%s-set_mode (bank, reg, mask, value): "
 256                         "0x%x, 0x%x, 0x%x, 0x%x\n",
 257                         info->desc.name, info->update_bank, info->update_reg,
 258                         info->update_mask, regval);
 259         }
 260
 261         info->update_val = regval;
 262
 263         return 0;
 264 }
 265
 266 static unsigned int ab8500_ext_regulator_get_mode(struct regulator_dev *rdev)
 267 {
 268         struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
 269         int ret;
 270
 271         if (info == NULL) {
 272                 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 273                 return -EINVAL;
 274         }
 275
 276         if (info->update_val == info->update_val_hp)
 277                 ret = REGULATOR_MODE_NORMAL;
 278         else if (info->update_val == info->update_val_lp)
 279                 ret = REGULATOR_MODE_IDLE;
 280         else
 281                 ret = -EINVAL;
 282
 283         return ret;
 284 }
 285
 286 static int ab8500_ext_set_voltage(struct regulator_dev *rdev, int min_uV,
 287                                   int max_uV, unsigned *selector)
 288 {
 289         struct regulation_constraints *regu_constraints = rdev->constraints;
 290
 291         if (!regu_constraints) {
 292                 dev_err(rdev_get_dev(rdev), "No regulator constraints\n");
 293                 return -EINVAL;
 294         }
 295
 296         if (regu_constraints->min_uV == min_uV &&
 297             regu_constraints->max_uV == max_uV)
 298                 return 0;
 299
 300         dev_err(rdev_get_dev(rdev),
 301                 "Requested min %duV max %duV != constrained min %duV max %duV\n",
 302                 min_uV, max_uV,
 303                 regu_constraints->min_uV, regu_constraints->max_uV);
 304
 305         return -EINVAL;
 306 }
 307
 308 static int ab8500_ext_list_voltage(struct regulator_dev *rdev,
 309                                    unsigned selector)
 310 {
 311         struct regulation_constraints *regu_constraints = rdev->constraints;
 312
 313         if (regu_constraints == NULL) {
 314                 dev_err(rdev_get_dev(rdev), "regulator constraints null pointer\n");
 315                 return -EINVAL;
 316         }
 317         /* return the uV for the fixed regulators */
 318         if (regu_constraints->min_uV && regu_constraints->max_uV) {
 319                 if (regu_constraints->min_uV == regu_constraints->max_uV)
 320                         return regu_constraints->min_uV;
 321         }
 322         return -EINVAL;
 323 }
 324
 325 static const struct regulator_ops ab8500_ext_regulator_ops = {
 326         .enable                 = ab8500_ext_regulator_enable,
 327         .disable                = ab8500_ext_regulator_disable,
 328         .is_enabled             = ab8500_ext_regulator_is_enabled,
 329         .set_mode               = ab8500_ext_regulator_set_mode,
 330         .get_mode               = ab8500_ext_regulator_get_mode,
 331         .set_voltage            = ab8500_ext_set_voltage,
 332         .list_voltage           = ab8500_ext_list_voltage,
 333 };
 334
 335 static struct ab8500_ext_regulator_info
 336                 ab8500_ext_regulator_info[AB8500_NUM_EXT_REGULATORS] = {
 337         [AB8500_EXT_SUPPLY1] = {
 338                 .desc = {
 339                         .name           = "VEXTSUPPLY1",
 340                         .of_match       = of_match_ptr("ab8500_ext1"),
 341                         .ops            = &ab8500_ext_regulator_ops,
 342                         .type           = REGULATOR_VOLTAGE,
 343                         .id             = AB8500_EXT_SUPPLY1,
 344                         .owner          = THIS_MODULE,
 345                         .n_voltages     = 1,
 346                 },
 347                 .update_bank            = 0x04,
 348                 .update_reg             = 0x08,
 349                 .update_mask            = 0x03,
 350                 .update_val             = 0x01,
 351                 .update_val_hp          = 0x01,
 352                 .update_val_lp          = 0x03,
 353                 .update_val_hw          = 0x02,
 354         },
 355         [AB8500_EXT_SUPPLY2] = {
 356                 .desc = {
 357                         .name           = "VEXTSUPPLY2",
 358                         .of_match       = of_match_ptr("ab8500_ext2"),
 359                         .ops            = &ab8500_ext_regulator_ops,
 360                         .type           = REGULATOR_VOLTAGE,
 361                         .id             = AB8500_EXT_SUPPLY2,
 362                         .owner          = THIS_MODULE,
 363                         .n_voltages     = 1,
 364                 },
 365                 .update_bank            = 0x04,
 366                 .update_reg             = 0x08,
 367                 .update_mask            = 0x0c,
 368                 .update_val             = 0x04,
 369                 .update_val_hp          = 0x04,
 370                 .update_val_lp          = 0x0c,
 371                 .update_val_hw          = 0x08,
 372         },
 373         [AB8500_EXT_SUPPLY3] = {
 374                 .desc = {
 375                         .name           = "VEXTSUPPLY3",
 376                         .of_match       = of_match_ptr("ab8500_ext3"),
 377                         .ops            = &ab8500_ext_regulator_ops,
 378                         .type           = REGULATOR_VOLTAGE,
 379                         .id             = AB8500_EXT_SUPPLY3,
 380                         .owner          = THIS_MODULE,
 381                         .n_voltages     = 1,
 382                 },
 383                 .update_bank            = 0x04,
 384                 .update_reg             = 0x08,
 385                 .update_mask            = 0x30,
 386                 .update_val             = 0x10,
 387                 .update_val_hp          = 0x10,
 388                 .update_val_lp          = 0x30,
 389                 .update_val_hw          = 0x20,
 390         },
 391 };
 392
 393 static int ab8500_ext_regulator_probe(struct platform_device *pdev)
 394 {
 395         struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 396         struct regulator_config config = { };
 397         struct regulator_dev *rdev;
 398         int i;
 399
 400         if (!ab8500) {
 401                 dev_err(&pdev->dev, "null mfd parent\n");
 402                 return -EINVAL;
 403         }
 404
 405         /* check for AB8500 2.x */
 406         if (is_ab8500_2p0_or_earlier(ab8500)) {
 407                 struct ab8500_ext_regulator_info *info;
 408
 409                 /* VextSupply3LPn is inverted on AB8500 2.x */
 410                 info = &ab8500_ext_regulator_info[AB8500_EXT_SUPPLY3];
 411                 info->update_val = 0x30;
 412                 info->update_val_hp = 0x30;
 413                 info->update_val_lp = 0x10;
 414         }
 415
 416         /* register all regulators */
 417         for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) {
 418                 struct ab8500_ext_regulator_info *info = NULL;
 419
 420                 /* assign per-regulator data */
 421                 info = &ab8500_ext_regulator_info[i];
 422                 info->dev = &pdev->dev;
 423                 info->cfg = (struct ab8500_ext_regulator_cfg *)
 424                         ab8500_ext_regulators[i].driver_data;
 425
 426                 config.dev = &pdev->dev;
 427                 config.driver_data = info;
 428                 config.init_data = &ab8500_ext_regulators[i];
 429
 430                 /* register regulator with framework */
 431                 rdev = devm_regulator_register(&pdev->dev, &info->desc,
 432                                                &config);
 433                 if (IS_ERR(rdev)) {
 434                         dev_err(&pdev->dev, "failed to register regulator %s\n",
 435                                         info->desc.name);
 436                         return PTR_ERR(rdev);
 437                 }
 438
 439                 dev_dbg(&pdev->dev, "%s-probed\n", info->desc.name);
 440         }
 441
 442         return 0;
 443 }
 444
 445 static struct platform_driver ab8500_ext_regulator_driver = {
 446         .probe = ab8500_ext_regulator_probe,
 447         .driver         = {
 448                 .name   = "ab8500-ext-regulator",
 449         },
 450 };
 451
 452 static int __init ab8500_ext_regulator_init(void)
 453 {
 454         int ret;
 455
 456         ret = platform_driver_register(&ab8500_ext_regulator_driver);
 457         if (ret)
 458                 pr_err("Failed to register ab8500 ext regulator: %d\n", ret);
 459
 460         return ret;
 461 }
 462 subsys_initcall(ab8500_ext_regulator_init);
 463
 464 static void __exit ab8500_ext_regulator_exit(void)
 465 {
 466         platform_driver_unregister(&ab8500_ext_regulator_driver);
 467 }
 468 module_exit(ab8500_ext_regulator_exit);
 469
 470 MODULE_LICENSE("GPL v2");
 471 MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
 472 MODULE_DESCRIPTION("AB8500 external regulator driver");
 473 MODULE_ALIAS("platform:ab8500-ext-regulator");