drivers/qe/uec.c

   1 /*
   2  * Copyright (C) 2006 Freescale Semiconductor, Inc.
   3  *
   4  * Dave Liu <daveliu@freescale.com>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation; either version 2 of
   9  * the License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  19  * MA 02111-1307 USA
  20  */
  21
  22 #include "common.h"
  23 #include "net.h"
  24 #include "malloc.h"
  25 #include "asm/errno.h"
  26 #include "asm/io.h"
  27 #include "asm/immap_qe.h"
  28 #include "qe.h"
  29 #include "uccf.h"
  30 #include "uec.h"
  31 #include "uec_phy.h"
  32
  33 #if defined(CONFIG_QE)
  34
  35 #ifdef CONFIG_UEC_ETH1
  36 static uec_info_t eth1_uec_info = {
  37         .uf_info                = {
  38                 .ucc_num        = CFG_UEC1_UCC_NUM,
  39                 .rx_clock       = CFG_UEC1_RX_CLK,
  40                 .tx_clock       = CFG_UEC1_TX_CLK,
  41                 .eth_type       = CFG_UEC1_ETH_TYPE,
  42         },
  43         .num_threads_tx         = UEC_NUM_OF_THREADS_4,
  44         .num_threads_rx         = UEC_NUM_OF_THREADS_4,
  45         .riscTx                 = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
  46         .riscRx                 = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
  47         .tx_bd_ring_len         = 16,
  48         .rx_bd_ring_len         = 16,
  49         .phy_address            = CFG_UEC1_PHY_ADDR,
  50         .enet_interface         = CFG_UEC1_INTERFACE_MODE,
  51 };
  52 #endif
  53 #ifdef CONFIG_UEC_ETH2
  54 static uec_info_t eth2_uec_info = {
  55         .uf_info                = {
  56                 .ucc_num        = CFG_UEC2_UCC_NUM,
  57                 .rx_clock       = CFG_UEC2_RX_CLK,
  58                 .tx_clock       = CFG_UEC2_TX_CLK,
  59                 .eth_type       = CFG_UEC2_ETH_TYPE,
  60         },
  61         .num_threads_tx         = UEC_NUM_OF_THREADS_4,
  62         .num_threads_rx         = UEC_NUM_OF_THREADS_4,
  63         .riscTx                 = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
  64         .riscRx                 = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
  65         .tx_bd_ring_len         = 16,
  66         .rx_bd_ring_len         = 16,
  67         .phy_address            = CFG_UEC2_PHY_ADDR,
  68         .enet_interface         = CFG_UEC2_INTERFACE_MODE,
  69 };
  70 #endif
  71
  72 static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
  73 {
  74         uec_t           *uec_regs;
  75         u32             maccfg1;
  76
  77         if (!uec) {
  78                 printf("%s: uec not initial\n", __FUNCTION__);
  79                 return -EINVAL;
  80         }
  81         uec_regs = uec->uec_regs;
  82
  83         maccfg1 = in_be32(&uec_regs->maccfg1);
  84
  85         if (mode & COMM_DIR_TX) {
  86                 maccfg1 |= MACCFG1_ENABLE_TX;
  87                 out_be32(&uec_regs->maccfg1, maccfg1);
  88                 uec->mac_tx_enabled = 1;
  89         }
  90
  91         if (mode & COMM_DIR_RX) {
  92                 maccfg1 |= MACCFG1_ENABLE_RX;
  93                 out_be32(&uec_regs->maccfg1, maccfg1);
  94                 uec->mac_rx_enabled = 1;
  95         }
  96
  97         return 0;
  98 }
  99
 100 static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode)
 101 {
 102         uec_t           *uec_regs;
 103         u32             maccfg1;
 104
 105         if (!uec) {
 106                 printf("%s: uec not initial\n", __FUNCTION__);
 107                 return -EINVAL;
 108         }
 109         uec_regs = uec->uec_regs;
 110
 111         maccfg1 = in_be32(&uec_regs->maccfg1);
 112
 113         if (mode & COMM_DIR_TX) {
 114                 maccfg1 &= ~MACCFG1_ENABLE_TX;
 115                 out_be32(&uec_regs->maccfg1, maccfg1);
 116                 uec->mac_tx_enabled = 0;
 117         }
 118
 119         if (mode & COMM_DIR_RX) {
 120                 maccfg1 &= ~MACCFG1_ENABLE_RX;
 121                 out_be32(&uec_regs->maccfg1, maccfg1);
 122                 uec->mac_rx_enabled = 0;
 123         }
 124
 125         return 0;
 126 }
 127
 128 static int uec_graceful_stop_tx(uec_private_t *uec)
 129 {
 130         ucc_fast_t              *uf_regs;
 131         u32                     cecr_subblock;
 132         u32                     ucce;
 133
 134         if (!uec || !uec->uccf) {
 135                 printf("%s: No handle passed.\n", __FUNCTION__);
 136                 return -EINVAL;
 137         }
 138
 139         uf_regs = uec->uccf->uf_regs;
 140
 141         /* Clear the grace stop event */
 142         out_be32(&uf_regs->ucce, UCCE_GRA);
 143
 144         /* Issue host command */
 145         cecr_subblock =
 146                  ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 147         qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
 148                          (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 149
 150         /* Wait for command to complete */
 151         do {
 152                 ucce = in_be32(&uf_regs->ucce);
 153         } while (! (ucce & UCCE_GRA));
 154
 155         uec->grace_stopped_tx = 1;
 156
 157         return 0;
 158 }
 159
 160 static int uec_graceful_stop_rx(uec_private_t *uec)
 161 {
 162         u32             cecr_subblock;
 163         u8              ack;
 164
 165         if (!uec) {
 166                 printf("%s: No handle passed.\n", __FUNCTION__);
 167                 return -EINVAL;
 168         }
 169
 170         if (!uec->p_rx_glbl_pram) {
 171                 printf("%s: No init rx global parameter\n", __FUNCTION__);
 172                 return -EINVAL;
 173         }
 174
 175         /* Clear acknowledge bit */
 176         ack = uec->p_rx_glbl_pram->rxgstpack;
 177         ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX;
 178         uec->p_rx_glbl_pram->rxgstpack = ack;
 179
 180         /* Keep issuing cmd and checking ack bit until it is asserted */
 181         do {
 182                 /* Issue host command */
 183                 cecr_subblock =
 184                  ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 185                 qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock,
 186                                  (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 187                 ack = uec->p_rx_glbl_pram->rxgstpack;
 188         } while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX ));
 189
 190         uec->grace_stopped_rx = 1;
 191
 192         return 0;
 193 }
 194
 195 static int uec_restart_tx(uec_private_t *uec)
 196 {
 197         u32             cecr_subblock;
 198
 199         if (!uec || !uec->uec_info) {
 200                 printf("%s: No handle passed.\n", __FUNCTION__);
 201                 return -EINVAL;
 202         }
 203
 204         cecr_subblock =
 205          ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 206         qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
 207                          (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 208
 209         uec->grace_stopped_tx = 0;
 210
 211         return 0;
 212 }
 213
 214 static int uec_restart_rx(uec_private_t *uec)
 215 {
 216         u32             cecr_subblock;
 217
 218         if (!uec || !uec->uec_info) {
 219                 printf("%s: No handle passed.\n", __FUNCTION__);
 220                 return -EINVAL;
 221         }
 222
 223         cecr_subblock =
 224          ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 225         qe_issue_cmd(QE_RESTART_RX, cecr_subblock,
 226                          (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 227
 228         uec->grace_stopped_rx = 0;
 229
 230         return 0;
 231 }
 232
 233 static int uec_open(uec_private_t *uec, comm_dir_e mode)
 234 {
 235         ucc_fast_private_t      *uccf;
 236
 237         if (!uec || !uec->uccf) {
 238                 printf("%s: No handle passed.\n", __FUNCTION__);
 239                 return -EINVAL;
 240         }
 241         uccf = uec->uccf;
 242
 243         /* check if the UCC number is in range. */
 244         if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
 245                 printf("%s: ucc_num out of range.\n", __FUNCTION__);
 246                 return -EINVAL;
 247         }
 248
 249         /* Enable MAC */
 250         uec_mac_enable(uec, mode);
 251
 252         /* Enable UCC fast */
 253         ucc_fast_enable(uccf, mode);
 254
 255         /* RISC microcode start */
 256         if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) {
 257                 uec_restart_tx(uec);
 258         }
 259         if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) {
 260                 uec_restart_rx(uec);
 261         }
 262
 263         return 0;
 264 }
 265
 266 static int uec_stop(uec_private_t *uec, comm_dir_e mode)
 267 {
 268         ucc_fast_private_t      *uccf;
 269
 270         if (!uec || !uec->uccf) {
 271                 printf("%s: No handle passed.\n", __FUNCTION__);
 272                 return -EINVAL;
 273         }
 274         uccf = uec->uccf;
 275
 276         /* check if the UCC number is in range. */
 277         if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
 278                 printf("%s: ucc_num out of range.\n", __FUNCTION__);
 279                 return -EINVAL;
 280         }
 281         /* Stop any transmissions */
 282         if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) {
 283                 uec_graceful_stop_tx(uec);
 284         }
 285         /* Stop any receptions */
 286         if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) {
 287                 uec_graceful_stop_rx(uec);
 288         }
 289
 290         /* Disable the UCC fast */
 291         ucc_fast_disable(uec->uccf, mode);
 292
 293         /* Disable the MAC */
 294         uec_mac_disable(uec, mode);
 295
 296         return 0;
 297 }
 298
 299 static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
 300 {
 301         uec_t           *uec_regs;
 302         u32             maccfg2;
 303
 304         if (!uec) {
 305                 printf("%s: uec not initial\n", __FUNCTION__);
 306                 return -EINVAL;
 307         }
 308         uec_regs = uec->uec_regs;
 309
 310         if (duplex == DUPLEX_HALF) {
 311                 maccfg2 = in_be32(&uec_regs->maccfg2);
 312                 maccfg2 &= ~MACCFG2_FDX;
 313                 out_be32(&uec_regs->maccfg2, maccfg2);
 314         }
 315
 316         if (duplex == DUPLEX_FULL) {
 317                 maccfg2 = in_be32(&uec_regs->maccfg2);
 318                 maccfg2 |= MACCFG2_FDX;
 319                 out_be32(&uec_regs->maccfg2, maccfg2);
 320         }
 321
 322         return 0;
 323 }
 324
 325 static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
 326 {
 327         enet_interface_e        enet_if_mode;
 328         uec_info_t              *uec_info;
 329         uec_t                   *uec_regs;
 330         u32                     upsmr;
 331         u32                     maccfg2;
 332
 333         if (!uec) {
 334                 printf("%s: uec not initial\n", __FUNCTION__);
 335                 return -EINVAL;
 336         }
 337
 338         uec_info = uec->uec_info;
 339         uec_regs = uec->uec_regs;
 340         enet_if_mode = if_mode;
 341
 342         maccfg2 = in_be32(&uec_regs->maccfg2);
 343         maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK;
 344
 345         upsmr = in_be32(&uec->uccf->uf_regs->upsmr);
 346         upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
 347
 348         switch (enet_if_mode) {
 349                 case ENET_100_MII:
 350                 case ENET_10_MII:
 351                         maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
 352                         break;
 353                 case ENET_1000_GMII:
 354                         maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
 355                         break;
 356                 case ENET_1000_TBI:
 357                         maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
 358                         upsmr |= UPSMR_TBIM;
 359                         break;
 360                 case ENET_1000_RTBI:
 361                         maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
 362                         upsmr |= (UPSMR_RPM | UPSMR_TBIM);
 363                         break;
 364                 case ENET_1000_RGMII:
 365                         maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
 366                         upsmr |= UPSMR_RPM;
 367                         break;
 368                 case ENET_100_RGMII:
 369                         maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
 370                         upsmr |= UPSMR_RPM;
 371                         break;
 372                 case ENET_10_RGMII:
 373                         maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
 374                         upsmr |= (UPSMR_RPM | UPSMR_R10M);
 375                         break;
 376                 case ENET_100_RMII:
 377                         maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
 378                         upsmr |= UPSMR_RMM;
 379                         break;
 380                 case ENET_10_RMII:
 381                         maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
 382                         upsmr |= (UPSMR_R10M | UPSMR_RMM);
 383                         break;
 384                 default:
 385                         return -EINVAL;
 386                         break;
 387         }
 388         out_be32(&uec_regs->maccfg2, maccfg2);
 389         out_be32(&uec->uccf->uf_regs->upsmr, upsmr);
 390
 391         return 0;
 392 }
 393
 394 static int init_mii_management_configuration(uec_t *uec_regs)
 395 {
 396         uint            timeout = 0x1000;
 397         u32             miimcfg = 0;
 398
 399         miimcfg = in_be32(&uec_regs->miimcfg);
 400         miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE;
 401         out_be32(&uec_regs->miimcfg, miimcfg);
 402
 403         /* Wait until the bus is free */
 404         while ((in_be32(&uec_regs->miimcfg) & MIIMIND_BUSY) && timeout--);
 405         if (timeout <= 0) {
 406                 printf("%s: The MII Bus is stuck!", __FUNCTION__);
 407                 return -ETIMEDOUT;
 408         }
 409
 410         return 0;
 411 }
 412
 413 static int init_phy(struct eth_device *dev)
 414 {
 415         uec_private_t           *uec;
 416         uec_t                   *uec_regs;
 417         struct uec_mii_info     *mii_info;
 418         struct phy_info         *curphy;
 419         int                     err;
 420
 421         uec = (uec_private_t *)dev->priv;
 422         uec_regs = uec->uec_regs;
 423
 424         uec->oldlink = 0;
 425         uec->oldspeed = 0;
 426         uec->oldduplex = -1;
 427
 428         mii_info = malloc(sizeof(*mii_info));
 429         if (!mii_info) {
 430                 printf("%s: Could not allocate mii_info", dev->name);
 431                 return -ENOMEM;
 432         }
 433         memset(mii_info, 0, sizeof(*mii_info));
 434
 435         if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
 436                 mii_info->speed = SPEED_1000;
 437         } else {
 438                 mii_info->speed = SPEED_100;
 439         }
 440
 441         mii_info->duplex = DUPLEX_FULL;
 442         mii_info->pause = 0;
 443         mii_info->link = 1;
 444
 445         mii_info->advertising = (ADVERTISED_10baseT_Half |
 446                                 ADVERTISED_10baseT_Full |
 447                                 ADVERTISED_100baseT_Half |
 448                                 ADVERTISED_100baseT_Full |
 449                                 ADVERTISED_1000baseT_Full);
 450         mii_info->autoneg = 1;
 451         mii_info->mii_id = uec->uec_info->phy_address;
 452         mii_info->dev = dev;
 453
 454         mii_info->mdio_read = &read_phy_reg;
 455         mii_info->mdio_write = &write_phy_reg;
 456
 457         uec->mii_info = mii_info;
 458
 459         if (init_mii_management_configuration(uec_regs)) {
 460                 printf("%s: The MII Bus is stuck!", dev->name);
 461                 err = -1;
 462                 goto bus_fail;
 463         }
 464
 465         /* get info for this PHY */
 466         curphy = get_phy_info(uec->mii_info);
 467         if (!curphy) {
 468                 printf("%s: No PHY found", dev->name);
 469                 err = -1;
 470                 goto no_phy;
 471         }
 472
 473         mii_info->phyinfo = curphy;
 474
 475         /* Run the commands which initialize the PHY */
 476         if (curphy->init) {
 477                 err = curphy->init(uec->mii_info);
 478                 if (err)
 479                         goto phy_init_fail;
 480         }
 481
 482         return 0;
 483
 484 phy_init_fail:
 485 no_phy:
 486 bus_fail:
 487         free(mii_info);
 488         return err;
 489 }
 490
 491 static void adjust_link(struct eth_device *dev)
 492 {
 493         uec_private_t           *uec = (uec_private_t *)dev->priv;
 494         uec_t                   *uec_regs;
 495         struct uec_mii_info     *mii_info = uec->mii_info;
 496
 497         extern void change_phy_interface_mode(struct eth_device *dev,
 498                                          enet_interface_e mode);
 499         uec_regs = uec->uec_regs;
 500
 501         if (mii_info->link) {
 502                 /* Now we make sure that we can be in full duplex mode.
 503                 * If not, we operate in half-duplex mode. */
 504                 if (mii_info->duplex != uec->oldduplex) {
 505                         if (!(mii_info->duplex)) {
 506                                 uec_set_mac_duplex(uec, DUPLEX_HALF);
 507                                 printf("%s: Half Duplex\n", dev->name);
 508                         } else {
 509                                 uec_set_mac_duplex(uec, DUPLEX_FULL);
 510                                 printf("%s: Full Duplex\n", dev->name);
 511                         }
 512                         uec->oldduplex = mii_info->duplex;
 513                 }
 514
 515                 if (mii_info->speed != uec->oldspeed) {
 516                         if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
 517                                 switch (mii_info->speed) {
 518                                 case 1000:
 519                                         break;
 520                                 case 100:
 521                                         printf ("switching to rgmii 100\n");
 522                                         /* change phy to rgmii 100 */
 523                                         change_phy_interface_mode(dev,
 524                                                                 ENET_100_RGMII);
 525                                         /* change the MAC interface mode */
 526                                         uec_set_mac_if_mode(uec,ENET_100_RGMII);
 527                                         break;
 528                                 case 10:
 529                                         printf ("switching to rgmii 10\n");
 530                                         /* change phy to rgmii 10 */
 531                                         change_phy_interface_mode(dev,
 532                                                                 ENET_10_RGMII);
 533                                         /* change the MAC interface mode */
 534                                         uec_set_mac_if_mode(uec,ENET_10_RGMII);
 535                                         break;
 536                                 default:
 537                                         printf("%s: Ack,Speed(%d)is illegal\n",
 538                                                 dev->name, mii_info->speed);
 539                                         break;
 540                                 }
 541                         }
 542
 543                         printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
 544                         uec->oldspeed = mii_info->speed;
 545                 }
 546
 547                 if (!uec->oldlink) {
 548                         printf("%s: Link is up\n", dev->name);
 549                         uec->oldlink = 1;
 550                 }
 551
 552         } else { /* if (mii_info->link) */
 553                 if (uec->oldlink) {
 554                         printf("%s: Link is down\n", dev->name);
 555                         uec->oldlink = 0;
 556                         uec->oldspeed = 0;
 557                         uec->oldduplex = -1;
 558                 }
 559         }
 560 }
 561
 562 static void phy_change(struct eth_device *dev)
 563 {
 564         uec_private_t   *uec = (uec_private_t *)dev->priv;
 565         uec_t           *uec_regs;
 566         int             result = 0;
 567
 568         uec_regs = uec->uec_regs;
 569
 570         /* Delay 5s to give the PHY a chance to change the register state */
 571         udelay(5000000);
 572
 573         /* Update the link, speed, duplex */
 574         result = uec->mii_info->phyinfo->read_status(uec->mii_info);
 575
 576         /* Adjust the interface according to speed */
 577         if ((0 == result) || (uec->mii_info->link == 0)) {
 578                 adjust_link(dev);
 579         }
 580 }
 581
 582 static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
 583 {
 584         uec_t           *uec_regs;
 585         u32             mac_addr1;
 586         u32             mac_addr2;
 587
 588         if (!uec) {
 589                 printf("%s: uec not initial\n", __FUNCTION__);
 590                 return -EINVAL;
 591         }
 592
 593         uec_regs = uec->uec_regs;
 594
 595         /* if a station address of 0x12345678ABCD, perform a write to
 596         MACSTNADDR1 of 0xCDAB7856,
 597         MACSTNADDR2 of 0x34120000 */
 598
 599         mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \
 600                         (mac_addr[3] << 8)  | (mac_addr[2]);
 601         out_be32(&uec_regs->macstnaddr1, mac_addr1);
 602
 603         mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000;
 604         out_be32(&uec_regs->macstnaddr2, mac_addr2);
 605
 606         return 0;
 607 }
 608
 609 static int uec_convert_threads_num(uec_num_of_threads_e threads_num,
 610                                          int *threads_num_ret)
 611 {
 612         int     num_threads_numerica;
 613
 614         switch (threads_num) {
 615                 case UEC_NUM_OF_THREADS_1:
 616                         num_threads_numerica = 1;
 617                         break;
 618                 case UEC_NUM_OF_THREADS_2:
 619                         num_threads_numerica = 2;
 620                         break;
 621                 case UEC_NUM_OF_THREADS_4:
 622                         num_threads_numerica = 4;
 623                         break;
 624                 case UEC_NUM_OF_THREADS_6:
 625                         num_threads_numerica = 6;
 626                         break;
 627                 case UEC_NUM_OF_THREADS_8:
 628                         num_threads_numerica = 8;
 629                         break;
 630                 default:
 631                         printf("%s: Bad number of threads value.",
 632                                  __FUNCTION__);
 633                         return -EINVAL;
 634         }
 635
 636         *threads_num_ret = num_threads_numerica;
 637
 638         return 0;
 639 }
 640
 641 static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx)
 642 {
 643         uec_info_t      *uec_info;
 644         u32             end_bd;
 645         u8              bmrx = 0;
 646         int             i;
 647
 648         uec_info = uec->uec_info;
 649
 650         /* Alloc global Tx parameter RAM page */
 651         uec->tx_glbl_pram_offset = qe_muram_alloc(
 652                                 sizeof(uec_tx_global_pram_t),
 653                                  UEC_TX_GLOBAL_PRAM_ALIGNMENT);
 654         uec->p_tx_glbl_pram = (uec_tx_global_pram_t *)
 655                                 qe_muram_addr(uec->tx_glbl_pram_offset);
 656
 657         /* Zero the global Tx prameter RAM */
 658         memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t));
 659
 660         /* Init global Tx parameter RAM */
 661
 662         /* TEMODER, RMON statistics disable, one Tx queue */
 663         out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE);
 664
 665         /* SQPTR */
 666         uec->send_q_mem_reg_offset = qe_muram_alloc(
 667                                 sizeof(uec_send_queue_qd_t),
 668                                  UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
 669         uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *)
 670                                 qe_muram_addr(uec->send_q_mem_reg_offset);
 671         out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset);
 672
 673         /* Setup the table with TxBDs ring */
 674         end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1)
 675                                          * SIZEOFBD;
 676         out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base,
 677                                  (u32)(uec->p_tx_bd_ring));
 678         out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address,
 679                                                  end_bd);
 680
 681         /* Scheduler Base Pointer, we have only one Tx queue, no need it */
 682         out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0);
 683
 684         /* TxRMON Base Pointer, TxRMON disable, we don't need it */
 685         out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0);
 686
 687         /* TSTATE, global snooping, big endian, the CSB bus selected */
 688         bmrx = BMR_INIT_VALUE;
 689         out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT));
 690
 691         /* IPH_Offset */
 692         for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) {
 693                 out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0);
 694         }
 695
 696         /* VTAG table */
 697         for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) {
 698                 out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0);
 699         }
 700
 701         /* TQPTR */
 702         uec->thread_dat_tx_offset = qe_muram_alloc(
 703                 num_threads_tx * sizeof(uec_thread_data_tx_t) +
 704                  32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT);
 705
 706         uec->p_thread_data_tx = (uec_thread_data_tx_t *)
 707                                 qe_muram_addr(uec->thread_dat_tx_offset);
 708         out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset);
 709 }
 710
 711 static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx)
 712 {
 713         u8      bmrx = 0;
 714         int     i;
 715         uec_82xx_address_filtering_pram_t       *p_af_pram;
 716
 717         /* Allocate global Rx parameter RAM page */
 718         uec->rx_glbl_pram_offset = qe_muram_alloc(
 719                 sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT);
 720         uec->p_rx_glbl_pram = (uec_rx_global_pram_t *)
 721                                 qe_muram_addr(uec->rx_glbl_pram_offset);
 722
 723         /* Zero Global Rx parameter RAM */
 724         memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t));
 725
 726         /* Init global Rx parameter RAM */
 727         /* REMODER, Extended feature mode disable, VLAN disable,
 728          LossLess flow control disable, Receive firmware statisic disable,
 729          Extended address parsing mode disable, One Rx queues,
 730          Dynamic maximum/minimum frame length disable, IP checksum check
 731          disable, IP address alignment disable
 732         */
 733         out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE);
 734
 735         /* RQPTR */
 736         uec->thread_dat_rx_offset = qe_muram_alloc(
 737                         num_threads_rx * sizeof(uec_thread_data_rx_t),
 738                          UEC_THREAD_DATA_ALIGNMENT);
 739         uec->p_thread_data_rx = (uec_thread_data_rx_t *)
 740                                 qe_muram_addr(uec->thread_dat_rx_offset);
 741         out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset);
 742
 743         /* Type_or_Len */
 744         out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072);
 745
 746         /* RxRMON base pointer, we don't need it */
 747         out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0);
 748
 749         /* IntCoalescingPTR, we don't need it, no interrupt */
 750         out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0);
 751
 752         /* RSTATE, global snooping, big endian, the CSB bus selected */
 753         bmrx = BMR_INIT_VALUE;
 754         out_8(&uec->p_rx_glbl_pram->rstate, bmrx);
 755
 756         /* MRBLR */
 757         out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN);
 758
 759         /* RBDQPTR */
 760         uec->rx_bd_qs_tbl_offset = qe_muram_alloc(
 761                                 sizeof(uec_rx_bd_queues_entry_t) + \
 762                                 sizeof(uec_rx_prefetched_bds_t),
 763                                  UEC_RX_BD_QUEUES_ALIGNMENT);
 764         uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *)
 765                                 qe_muram_addr(uec->rx_bd_qs_tbl_offset);
 766
 767         /* Zero it */
 768         memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \
 769                                         sizeof(uec_rx_prefetched_bds_t));
 770         out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset);
 771         out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr,
 772                  (u32)uec->p_rx_bd_ring);
 773
 774         /* MFLR */
 775         out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN);
 776         /* MINFLR */
 777         out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN);
 778         /* MAXD1 */
 779         out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN);
 780         /* MAXD2 */
 781         out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN);
 782         /* ECAM_PTR */
 783         out_be32(&uec->p_rx_glbl_pram->ecamptr, 0);
 784         /* L2QT */
 785         out_be32(&uec->p_rx_glbl_pram->l2qt, 0);
 786         /* L3QT */
 787         for (i = 0; i < 8; i++) {
 788                 out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0);
 789         }
 790
 791         /* VLAN_TYPE */
 792         out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100);
 793         /* TCI */
 794         out_be16(&uec->p_rx_glbl_pram->vlantci, 0);
 795
 796         /* Clear PQ2 style address filtering hash table */
 797         p_af_pram = (uec_82xx_address_filtering_pram_t *) \
 798                         uec->p_rx_glbl_pram->addressfiltering;
 799
 800         p_af_pram->iaddr_h = 0;
 801         p_af_pram->iaddr_l = 0;
 802         p_af_pram->gaddr_h = 0;
 803         p_af_pram->gaddr_l = 0;
 804 }
 805
 806 static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec,
 807                                          int thread_tx, int thread_rx)
 808 {
 809         uec_init_cmd_pram_t             *p_init_enet_param;
 810         u32                             init_enet_param_offset;
 811         uec_info_t                      *uec_info;
 812         int                             i;
 813         int                             snum;
 814         u32                             init_enet_offset;
 815         u32                             entry_val;
 816         u32                             command;
 817         u32                             cecr_subblock;
 818
 819         uec_info = uec->uec_info;
 820
 821         /* Allocate init enet command parameter */
 822         uec->init_enet_param_offset = qe_muram_alloc(
 823                                         sizeof(uec_init_cmd_pram_t), 4);
 824         init_enet_param_offset = uec->init_enet_param_offset;
 825         uec->p_init_enet_param = (uec_init_cmd_pram_t *)
 826                                 qe_muram_addr(uec->init_enet_param_offset);
 827
 828         /* Zero init enet command struct */
 829         memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t));
 830
 831         /* Init the command struct */
 832         p_init_enet_param = uec->p_init_enet_param;
 833         p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0;
 834         p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1;
 835         p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2;
 836         p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3;
 837         p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4;
 838         p_init_enet_param->largestexternallookupkeysize = 0;
 839
 840         p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx)
 841                                          << ENET_INIT_PARAM_RGF_SHIFT;
 842         p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx)
 843                                          << ENET_INIT_PARAM_TGF_SHIFT;
 844
 845         /* Init Rx global parameter pointer */
 846         p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset |
 847                                                  (u32)uec_info->riscRx;
 848
 849         /* Init Rx threads */
 850         for (i = 0; i < (thread_rx + 1); i++) {
 851                 if ((snum = qe_get_snum()) < 0) {
 852                         printf("%s can not get snum\n", __FUNCTION__);
 853                         return -ENOMEM;
 854                 }
 855
 856                 if (i==0) {
 857                         init_enet_offset = 0;
 858                 } else {
 859                         init_enet_offset = qe_muram_alloc(
 860                                         sizeof(uec_thread_rx_pram_t),
 861                                          UEC_THREAD_RX_PRAM_ALIGNMENT);
 862                 }
 863
 864                 entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
 865                                  init_enet_offset | (u32)uec_info->riscRx;
 866                 p_init_enet_param->rxthread[i] = entry_val;
 867         }
 868
 869         /* Init Tx global parameter pointer */
 870         p_init_enet_param->txglobal = uec->tx_glbl_pram_offset |
 871                                          (u32)uec_info->riscTx;
 872
 873         /* Init Tx threads */
 874         for (i = 0; i < thread_tx; i++) {
 875                 if ((snum = qe_get_snum()) < 0) {
 876                         printf("%s can not get snum\n", __FUNCTION__);
 877                         return -ENOMEM;
 878                 }
 879
 880                 init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t),
 881                                                  UEC_THREAD_TX_PRAM_ALIGNMENT);
 882
 883                 entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
 884                                  init_enet_offset | (u32)uec_info->riscTx;
 885                 p_init_enet_param->txthread[i] = entry_val;
 886         }
 887
 888         __asm__ __volatile__("sync");
 889
 890         /* Issue QE command */
 891         command = QE_INIT_TX_RX;
 892         cecr_subblock = ucc_fast_get_qe_cr_subblock(
 893                                 uec->uec_info->uf_info.ucc_num);
 894         qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET,
 895                                                  init_enet_param_offset);
 896
 897         return 0;
 898 }
 899
 900 static int uec_startup(uec_private_t *uec)
 901 {
 902         uec_info_t                      *uec_info;
 903         ucc_fast_info_t                 *uf_info;
 904         ucc_fast_private_t              *uccf;
 905         ucc_fast_t                      *uf_regs;
 906         uec_t                           *uec_regs;
 907         int                             num_threads_tx;
 908         int                             num_threads_rx;
 909         u32                             utbipar;
 910         enet_interface_e                enet_interface;
 911         u32                             length;
 912         u32                             align;
 913         qe_bd_t                         *bd;
 914         u8                              *buf;
 915         int                             i;
 916
 917         if (!uec || !uec->uec_info) {
 918                 printf("%s: uec or uec_info not initial\n", __FUNCTION__);
 919                 return -EINVAL;
 920         }
 921
 922         uec_info = uec->uec_info;
 923         uf_info = &(uec_info->uf_info);
 924
 925         /* Check if Rx BD ring len is illegal */
 926         if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \
 927                 (uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) {
 928                 printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n",
 929                          __FUNCTION__);
 930                 return -EINVAL;
 931         }
 932
 933         /* Check if Tx BD ring len is illegal */
 934         if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) {
 935                 printf("%s: Tx BD ring length must not be smaller than 2.\n",
 936                          __FUNCTION__);
 937                 return -EINVAL;
 938         }
 939
 940         /* Check if MRBLR is illegal */
 941         if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN  % UEC_MRBLR_ALIGNMENT)) {
 942                 printf("%s: max rx buffer length must be mutliple of 128.\n",
 943                          __FUNCTION__);
 944                 return -EINVAL;
 945         }
 946
 947         /* Both Rx and Tx are stopped */
 948         uec->grace_stopped_rx = 1;
 949         uec->grace_stopped_tx = 1;
 950
 951         /* Init UCC fast */
 952         if (ucc_fast_init(uf_info, &uccf)) {
 953                 printf("%s: failed to init ucc fast\n", __FUNCTION__);
 954                 return -ENOMEM;
 955         }
 956
 957         /* Save uccf */
 958         uec->uccf = uccf;
 959
 960         /* Convert the Tx threads number */
 961         if (uec_convert_threads_num(uec_info->num_threads_tx,
 962                                          &num_threads_tx)) {
 963                 return -EINVAL;
 964         }
 965
 966         /* Convert the Rx threads number */
 967         if (uec_convert_threads_num(uec_info->num_threads_rx,
 968                                          &num_threads_rx)) {
 969                 return -EINVAL;
 970         }
 971
 972         uf_regs = uccf->uf_regs;
 973
 974         /* UEC register is following UCC fast registers */
 975         uec_regs = (uec_t *)(&uf_regs->ucc_eth);
 976
 977         /* Save the UEC register pointer to UEC private struct */
 978         uec->uec_regs = uec_regs;
 979
 980         /* Init UPSMR, enable hardware statistics (UCC) */
 981         out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE);
 982
 983         /* Init MACCFG1, flow control disable, disable Tx and Rx */
 984         out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE);
 985
 986         /* Init MACCFG2, length check, MAC PAD and CRC enable */
 987         out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE);
 988
 989         /* Setup MAC interface mode */
 990         uec_set_mac_if_mode(uec, uec_info->enet_interface);
 991
 992         /* Setup MII master clock source */
 993         qe_set_mii_clk_src(uec_info->uf_info.ucc_num);
 994
 995         /* Setup UTBIPAR */
 996         utbipar = in_be32(&uec_regs->utbipar);
 997         utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK;
 998         enet_interface = uec->uec_info->enet_interface;
 999         if (enet_interface == ENET_1000_TBI ||
1000                  enet_interface == ENET_1000_RTBI) {
1001                 utbipar |=  (uec_info->phy_address + uec_info->uf_info.ucc_num)
1002                                                  << UTBIPAR_PHY_ADDRESS_SHIFT;
1003         } else {
1004                 utbipar |=  (0x10 + uec_info->uf_info.ucc_num)
1005                                                  << UTBIPAR_PHY_ADDRESS_SHIFT;
1006         }
1007
1008         out_be32(&uec_regs->utbipar, utbipar);
1009
1010         /* Allocate Tx BDs */
1011         length = ((uec_info->tx_bd_ring_len * SIZEOFBD) /
1012                  UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) *
1013                  UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
1014         if ((uec_info->tx_bd_ring_len * SIZEOFBD) %
1015                  UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) {
1016                 length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
1017         }
1018
1019         align = UEC_TX_BD_RING_ALIGNMENT;
1020         uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align));
1021         if (uec->tx_bd_ring_offset != 0) {
1022                 uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align)
1023                                                  & ~(align - 1));
1024         }
1025
1026         /* Zero all of Tx BDs */
1027         memset((void *)(uec->tx_bd_ring_offset), 0, length + align);
1028
1029         /* Allocate Rx BDs */
1030         length = uec_info->rx_bd_ring_len * SIZEOFBD;
1031         align = UEC_RX_BD_RING_ALIGNMENT;
1032         uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align)));
1033         if (uec->rx_bd_ring_offset != 0) {
1034                 uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align)
1035                                                          & ~(align - 1));
1036         }
1037
1038         /* Zero all of Rx BDs */
1039         memset((void *)(uec->rx_bd_ring_offset), 0, length + align);
1040
1041         /* Allocate Rx buffer */
1042         length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN;
1043         align = UEC_RX_DATA_BUF_ALIGNMENT;
1044         uec->rx_buf_offset = (u32)malloc(length + align);
1045         if (uec->rx_buf_offset != 0) {
1046                 uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align)
1047                                                  & ~(align - 1));
1048         }
1049
1050         /* Zero all of the Rx buffer */
1051         memset((void *)(uec->rx_buf_offset), 0, length + align);
1052
1053         /* Init TxBD ring */
1054         bd = (qe_bd_t *)uec->p_tx_bd_ring;
1055         uec->txBd = bd;
1056
1057         for (i = 0; i < uec_info->tx_bd_ring_len; i++) {
1058                 BD_DATA_CLEAR(bd);
1059                 BD_STATUS_SET(bd, 0);
1060                 BD_LENGTH_SET(bd, 0);
1061                 bd ++;
1062         }
1063         BD_STATUS_SET((--bd), TxBD_WRAP);
1064
1065         /* Init RxBD ring */
1066         bd = (qe_bd_t *)uec->p_rx_bd_ring;
1067         uec->rxBd = bd;
1068         buf = uec->p_rx_buf;
1069         for (i = 0; i < uec_info->rx_bd_ring_len; i++) {
1070                 BD_DATA_SET(bd, buf);
1071                 BD_LENGTH_SET(bd, 0);
1072                 BD_STATUS_SET(bd, RxBD_EMPTY);
1073                 buf += MAX_RXBUF_LEN;
1074                 bd ++;
1075         }
1076         BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY);
1077
1078         /* Init global Tx parameter RAM */
1079         uec_init_tx_parameter(uec, num_threads_tx);
1080
1081         /* Init global Rx parameter RAM */
1082         uec_init_rx_parameter(uec, num_threads_rx);
1083
1084         /* Init ethernet Tx and Rx parameter command */
1085         if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx,
1086                                          num_threads_rx)) {
1087                 printf("%s issue init enet cmd failed\n", __FUNCTION__);
1088                 return -ENOMEM;
1089         }
1090
1091         return 0;
1092 }
1093
1094 static int uec_init(struct eth_device* dev, bd_t *bd)
1095 {
1096         uec_private_t           *uec;
1097         int                     err;
1098
1099         uec = (uec_private_t *)dev->priv;
1100
1101         if (uec->the_first_run == 0) {
1102                 /* Set up the MAC address */
1103                 if (dev->enetaddr[0] & 0x01) {
1104                         printf("%s: MacAddress is multcast address\n",
1105                                  __FUNCTION__);
1106                         return -EINVAL;
1107                 }
1108                 uec_set_mac_address(uec, dev->enetaddr);
1109                 uec->the_first_run = 1;
1110         }
1111
1112         err = uec_open(uec, COMM_DIR_RX_AND_TX);
1113         if (err) {
1114                 printf("%s: cannot enable UEC device\n", dev->name);
1115                 return err;
1116         }
1117
1118         return 0;
1119 }
1120
1121 static void uec_halt(struct eth_device* dev)
1122 {
1123         uec_private_t   *uec = (uec_private_t *)dev->priv;
1124         uec_stop(uec, COMM_DIR_RX_AND_TX);
1125 }
1126
1127 static int uec_send(struct eth_device* dev, volatile void *buf, int len)
1128 {
1129         uec_private_t           *uec;
1130         ucc_fast_private_t      *uccf;
1131         volatile qe_bd_t        *bd;
1132         u16                     status;
1133         int                     i;
1134         int                     result = 0;
1135
1136         uec = (uec_private_t *)dev->priv;
1137         uccf = uec->uccf;
1138         bd = uec->txBd;
1139
1140         /* Find an empty TxBD */
1141         for (i = 0; bd->status & TxBD_READY; i++) {
1142                 if (i > 0x100000) {
1143                         printf("%s: tx buffer not ready\n", dev->name);
1144                         return result;
1145                 }
1146         }
1147
1148         /* Init TxBD */
1149         BD_DATA_SET(bd, buf);
1150         BD_LENGTH_SET(bd, len);
1151         status = bd->status;
1152         status &= BD_WRAP;
1153         status |= (TxBD_READY | TxBD_LAST);
1154         BD_STATUS_SET(bd, status);
1155
1156         /* Tell UCC to transmit the buffer */
1157         ucc_fast_transmit_on_demand(uccf);
1158
1159         /* Wait for buffer to be transmitted */
1160         for (i = 0; bd->status & TxBD_READY; i++) {
1161                 if (i > 0x100000) {
1162                         printf("%s: tx error\n", dev->name);
1163                         return result;
1164                 }
1165         }
1166
1167         /* Ok, the buffer be transimitted */
1168         BD_ADVANCE(bd, status, uec->p_tx_bd_ring);
1169         uec->txBd = bd;
1170         result = 1;
1171
1172         return result;
1173 }
1174
1175 static int uec_recv(struct eth_device* dev)
1176 {
1177         uec_private_t           *uec = dev->priv;
1178         volatile qe_bd_t        *bd;
1179         u16                     status;
1180         u16                     len;
1181         u8                      *data;
1182
1183         bd = uec->rxBd;
1184         status = bd->status;
1185
1186         while (!(status & RxBD_EMPTY)) {
1187                 if (!(status & RxBD_ERROR)) {
1188                         data = BD_DATA(bd);
1189                         len = BD_LENGTH(bd);
1190                         NetReceive(data, len);
1191                 } else {
1192                         printf("%s: Rx error\n", dev->name);
1193                 }
1194                 status &= BD_CLEAN;
1195                 BD_LENGTH_SET(bd, 0);
1196                 BD_STATUS_SET(bd, status | RxBD_EMPTY);
1197                 BD_ADVANCE(bd, status, uec->p_rx_bd_ring);
1198                 status = bd->status;
1199         }
1200         uec->rxBd = bd;
1201
1202         return 1;
1203 }
1204
1205 int uec_initialize(int index)
1206 {
1207         struct eth_device       *dev;
1208         int                     i;
1209         uec_private_t           *uec;
1210         uec_info_t              *uec_info;
1211         int                     err;
1212
1213         dev = (struct eth_device *)malloc(sizeof(struct eth_device));
1214         if (!dev)
1215                 return 0;
1216         memset(dev, 0, sizeof(struct eth_device));
1217
1218         /* Allocate the UEC private struct */
1219         uec = (uec_private_t *)malloc(sizeof(uec_private_t));
1220         if (!uec) {
1221                 return -ENOMEM;
1222         }
1223         memset(uec, 0, sizeof(uec_private_t));
1224
1225         /* Init UEC private struct, they come from board.h */
1226         if (index == 0) {
1227 #ifdef CONFIG_UEC_ETH1
1228                 uec_info = &eth1_uec_info;
1229 #endif
1230         } else if (index == 1) {
1231 #ifdef CONFIG_UEC_ETH2
1232                 uec_info = &eth2_uec_info;
1233 #endif
1234         } else {
1235                 printf("%s: index is illegal.\n", __FUNCTION__);
1236                 return -EINVAL;
1237         }
1238
1239         uec->uec_info = uec_info;
1240
1241         sprintf(dev->name, "FSL UEC%d", index);
1242         dev->iobase = 0;
1243         dev->priv = (void *)uec;
1244         dev->init = uec_init;
1245         dev->halt = uec_halt;
1246         dev->send = uec_send;
1247         dev->recv = uec_recv;
1248
1249         /* Clear the ethnet address */
1250         for (i = 0; i < 6; i++)
1251                 dev->enetaddr[i] = 0;
1252
1253         eth_register(dev);
1254
1255         err = uec_startup(uec);
1256         if (err) {
1257                 printf("%s: Cannot configure net device, aborting.",dev->name);
1258                 return err;
1259         }
1260
1261         err = init_phy(dev);
1262         if (err) {
1263                 printf("%s: Cannot initialize PHY, aborting.\n", dev->name);
1264                 return err;
1265         }
1266
1267         phy_change(dev);
1268
1269         return 1;
1270 }
1271 #endif /* CONFIG_QE */