Merge tag 'zynq-soc-for-v5.15' of https://github.com/Xilinx/linux-xlnx into arm/defconfig
[platform/kernel/linux-starfive.git] / drivers / pwm / pwm-tiecap.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * ECAP PWM driver
4  *
5  * Copyright (C) 2012 Texas Instruments, Inc. - https://www.ti.com/
6  */
7
8 #include <linux/module.h>
9 #include <linux/platform_device.h>
10 #include <linux/io.h>
11 #include <linux/err.h>
12 #include <linux/clk.h>
13 #include <linux/pm_runtime.h>
14 #include <linux/pwm.h>
15 #include <linux/of_device.h>
16
17 /* ECAP registers and bits definitions */
18 #define CAP1                    0x08
19 #define CAP2                    0x0C
20 #define CAP3                    0x10
21 #define CAP4                    0x14
22 #define ECCTL2                  0x2A
23 #define ECCTL2_APWM_POL_LOW     BIT(10)
24 #define ECCTL2_APWM_MODE        BIT(9)
25 #define ECCTL2_SYNC_SEL_DISA    (BIT(7) | BIT(6))
26 #define ECCTL2_TSCTR_FREERUN    BIT(4)
27
28 struct ecap_context {
29         u32 cap3;
30         u32 cap4;
31         u16 ecctl2;
32 };
33
34 struct ecap_pwm_chip {
35         struct pwm_chip chip;
36         unsigned int clk_rate;
37         void __iomem *mmio_base;
38         struct ecap_context ctx;
39 };
40
41 static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip)
42 {
43         return container_of(chip, struct ecap_pwm_chip, chip);
44 }
45
46 /*
47  * period_ns = 10^9 * period_cycles / PWM_CLK_RATE
48  * duty_ns   = 10^9 * duty_cycles / PWM_CLK_RATE
49  */
50 static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
51                            int duty_ns, int period_ns, int enabled)
52 {
53         struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
54         u32 period_cycles, duty_cycles;
55         unsigned long long c;
56         u16 value;
57
58         c = pc->clk_rate;
59         c = c * period_ns;
60         do_div(c, NSEC_PER_SEC);
61         period_cycles = (u32)c;
62
63         if (period_cycles < 1) {
64                 period_cycles = 1;
65                 duty_cycles = 1;
66         } else {
67                 c = pc->clk_rate;
68                 c = c * duty_ns;
69                 do_div(c, NSEC_PER_SEC);
70                 duty_cycles = (u32)c;
71         }
72
73         pm_runtime_get_sync(pc->chip.dev);
74
75         value = readw(pc->mmio_base + ECCTL2);
76
77         /* Configure APWM mode & disable sync option */
78         value |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA;
79
80         writew(value, pc->mmio_base + ECCTL2);
81
82         if (!enabled) {
83                 /* Update active registers if not running */
84                 writel(duty_cycles, pc->mmio_base + CAP2);
85                 writel(period_cycles, pc->mmio_base + CAP1);
86         } else {
87                 /*
88                  * Update shadow registers to configure period and
89                  * compare values. This helps current PWM period to
90                  * complete on reconfiguring
91                  */
92                 writel(duty_cycles, pc->mmio_base + CAP4);
93                 writel(period_cycles, pc->mmio_base + CAP3);
94         }
95
96         if (!enabled) {
97                 value = readw(pc->mmio_base + ECCTL2);
98                 /* Disable APWM mode to put APWM output Low */
99                 value &= ~ECCTL2_APWM_MODE;
100                 writew(value, pc->mmio_base + ECCTL2);
101         }
102
103         pm_runtime_put_sync(pc->chip.dev);
104
105         return 0;
106 }
107
108 static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
109                                  enum pwm_polarity polarity)
110 {
111         struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
112         u16 value;
113
114         pm_runtime_get_sync(pc->chip.dev);
115
116         value = readw(pc->mmio_base + ECCTL2);
117
118         if (polarity == PWM_POLARITY_INVERSED)
119                 /* Duty cycle defines LOW period of PWM */
120                 value |= ECCTL2_APWM_POL_LOW;
121         else
122                 /* Duty cycle defines HIGH period of PWM */
123                 value &= ~ECCTL2_APWM_POL_LOW;
124
125         writew(value, pc->mmio_base + ECCTL2);
126
127         pm_runtime_put_sync(pc->chip.dev);
128
129         return 0;
130 }
131
132 static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
133 {
134         struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
135         u16 value;
136
137         /* Leave clock enabled on enabling PWM */
138         pm_runtime_get_sync(pc->chip.dev);
139
140         /*
141          * Enable 'Free run Time stamp counter mode' to start counter
142          * and  'APWM mode' to enable APWM output
143          */
144         value = readw(pc->mmio_base + ECCTL2);
145         value |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE;
146         writew(value, pc->mmio_base + ECCTL2);
147
148         return 0;
149 }
150
151 static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
152 {
153         struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
154         u16 value;
155
156         /*
157          * Disable 'Free run Time stamp counter mode' to stop counter
158          * and 'APWM mode' to put APWM output to low
159          */
160         value = readw(pc->mmio_base + ECCTL2);
161         value &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE);
162         writew(value, pc->mmio_base + ECCTL2);
163
164         /* Disable clock on PWM disable */
165         pm_runtime_put_sync(pc->chip.dev);
166 }
167
168 static int ecap_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
169                           const struct pwm_state *state)
170 {
171         int err;
172         int enabled = pwm->state.enabled;
173
174         if (state->polarity != pwm->state.polarity) {
175
176                 if (enabled) {
177                         ecap_pwm_disable(chip, pwm);
178                         enabled = false;
179                 }
180
181                 err = ecap_pwm_set_polarity(chip, pwm, state->polarity);
182                 if (err)
183                         return err;
184         }
185
186         if (!state->enabled) {
187                 if (enabled)
188                         ecap_pwm_disable(chip, pwm);
189                 return 0;
190         }
191
192         if (state->period > NSEC_PER_SEC)
193                 return -ERANGE;
194
195         err = ecap_pwm_config(chip, pwm, state->duty_cycle,
196                               state->period, enabled);
197         if (err)
198                 return err;
199
200         if (!enabled)
201                 return ecap_pwm_enable(chip, pwm);
202
203         return 0;
204 }
205
206 static const struct pwm_ops ecap_pwm_ops = {
207         .apply = ecap_pwm_apply,
208         .owner = THIS_MODULE,
209 };
210
211 static const struct of_device_id ecap_of_match[] = {
212         { .compatible   = "ti,am3352-ecap" },
213         { .compatible   = "ti,am33xx-ecap" },
214         {},
215 };
216 MODULE_DEVICE_TABLE(of, ecap_of_match);
217
218 static int ecap_pwm_probe(struct platform_device *pdev)
219 {
220         struct device_node *np = pdev->dev.of_node;
221         struct ecap_pwm_chip *pc;
222         struct clk *clk;
223         int ret;
224
225         pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
226         if (!pc)
227                 return -ENOMEM;
228
229         clk = devm_clk_get(&pdev->dev, "fck");
230         if (IS_ERR(clk)) {
231                 if (of_device_is_compatible(np, "ti,am33xx-ecap")) {
232                         dev_warn(&pdev->dev, "Binding is obsolete.\n");
233                         clk = devm_clk_get(pdev->dev.parent, "fck");
234                 }
235         }
236
237         if (IS_ERR(clk)) {
238                 dev_err(&pdev->dev, "failed to get clock\n");
239                 return PTR_ERR(clk);
240         }
241
242         pc->clk_rate = clk_get_rate(clk);
243         if (!pc->clk_rate) {
244                 dev_err(&pdev->dev, "failed to get clock rate\n");
245                 return -EINVAL;
246         }
247
248         pc->chip.dev = &pdev->dev;
249         pc->chip.ops = &ecap_pwm_ops;
250         pc->chip.npwm = 1;
251
252         pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
253         if (IS_ERR(pc->mmio_base))
254                 return PTR_ERR(pc->mmio_base);
255
256         ret = pwmchip_add(&pc->chip);
257         if (ret < 0) {
258                 dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
259                 return ret;
260         }
261
262         platform_set_drvdata(pdev, pc);
263         pm_runtime_enable(&pdev->dev);
264
265         return 0;
266 }
267
268 static int ecap_pwm_remove(struct platform_device *pdev)
269 {
270         struct ecap_pwm_chip *pc = platform_get_drvdata(pdev);
271
272         pm_runtime_disable(&pdev->dev);
273
274         return pwmchip_remove(&pc->chip);
275 }
276
277 #ifdef CONFIG_PM_SLEEP
278 static void ecap_pwm_save_context(struct ecap_pwm_chip *pc)
279 {
280         pm_runtime_get_sync(pc->chip.dev);
281         pc->ctx.ecctl2 = readw(pc->mmio_base + ECCTL2);
282         pc->ctx.cap4 = readl(pc->mmio_base + CAP4);
283         pc->ctx.cap3 = readl(pc->mmio_base + CAP3);
284         pm_runtime_put_sync(pc->chip.dev);
285 }
286
287 static void ecap_pwm_restore_context(struct ecap_pwm_chip *pc)
288 {
289         writel(pc->ctx.cap3, pc->mmio_base + CAP3);
290         writel(pc->ctx.cap4, pc->mmio_base + CAP4);
291         writew(pc->ctx.ecctl2, pc->mmio_base + ECCTL2);
292 }
293
294 static int ecap_pwm_suspend(struct device *dev)
295 {
296         struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
297         struct pwm_device *pwm = pc->chip.pwms;
298
299         ecap_pwm_save_context(pc);
300
301         /* Disable explicitly if PWM is running */
302         if (pwm_is_enabled(pwm))
303                 pm_runtime_put_sync(dev);
304
305         return 0;
306 }
307
308 static int ecap_pwm_resume(struct device *dev)
309 {
310         struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
311         struct pwm_device *pwm = pc->chip.pwms;
312
313         /* Enable explicitly if PWM was running */
314         if (pwm_is_enabled(pwm))
315                 pm_runtime_get_sync(dev);
316
317         ecap_pwm_restore_context(pc);
318         return 0;
319 }
320 #endif
321
322 static SIMPLE_DEV_PM_OPS(ecap_pwm_pm_ops, ecap_pwm_suspend, ecap_pwm_resume);
323
324 static struct platform_driver ecap_pwm_driver = {
325         .driver = {
326                 .name = "ecap",
327                 .of_match_table = ecap_of_match,
328                 .pm = &ecap_pwm_pm_ops,
329         },
330         .probe = ecap_pwm_probe,
331         .remove = ecap_pwm_remove,
332 };
333 module_platform_driver(ecap_pwm_driver);
334
335 MODULE_DESCRIPTION("ECAP PWM driver");
336 MODULE_AUTHOR("Texas Instruments");
337 MODULE_LICENSE("GPL");