1 // SPDX-License-Identifier: GPL-2.0
3 * STM32 Low-Power Timer PWM driver
5 * Copyright (C) STMicroelectronics 2017
7 * Author: Gerald Baeza <gerald.baeza@st.com>
9 * Inspired by Gerald Baeza's pwm-stm32 driver
12 #include <linux/bitfield.h>
13 #include <linux/mfd/stm32-lptimer.h>
14 #include <linux/module.h>
16 #include <linux/pinctrl/consumer.h>
17 #include <linux/platform_device.h>
18 #include <linux/pwm.h>
23 struct regmap *regmap;
26 static inline struct stm32_pwm_lp *to_stm32_pwm_lp(struct pwm_chip *chip)
28 return container_of(chip, struct stm32_pwm_lp, chip);
31 /* STM32 Low-Power Timer is preceded by a configurable power-of-2 prescaler */
32 #define STM32_LPTIM_MAX_PRESCALER 128
34 static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm,
35 const struct pwm_state *state)
37 struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
38 unsigned long long prd, div, dty;
39 struct pwm_state cstate;
40 u32 val, mask, cfgr, presc = 0;
44 pwm_get_state(pwm, &cstate);
45 reenable = !cstate.enabled;
47 if (!state->enabled) {
49 /* Disable LP timer */
50 ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
53 /* disable clock to PWM counter */
54 clk_disable(priv->clk);
59 /* Calculate the period and prescaler value */
60 div = (unsigned long long)clk_get_rate(priv->clk) * state->period;
61 do_div(div, NSEC_PER_SEC);
63 /* Clock is too slow to achieve requested period. */
64 dev_dbg(priv->chip.dev, "Can't reach %llu ns\n", state->period);
69 while (div > STM32_LPTIM_MAX_ARR) {
71 if ((1 << presc) > STM32_LPTIM_MAX_PRESCALER) {
72 dev_err(priv->chip.dev, "max prescaler exceeded\n");
79 /* Calculate the duty cycle */
80 dty = prd * state->duty_cycle;
81 do_div(dty, state->period);
83 if (!cstate.enabled) {
84 /* enable clock to drive PWM counter */
85 ret = clk_enable(priv->clk);
90 ret = regmap_read(priv->regmap, STM32_LPTIM_CFGR, &cfgr);
94 if ((FIELD_GET(STM32_LPTIM_PRESC, cfgr) != presc) ||
95 (FIELD_GET(STM32_LPTIM_WAVPOL, cfgr) != state->polarity)) {
96 val = FIELD_PREP(STM32_LPTIM_PRESC, presc);
97 val |= FIELD_PREP(STM32_LPTIM_WAVPOL, state->polarity);
98 mask = STM32_LPTIM_PRESC | STM32_LPTIM_WAVPOL;
100 /* Must disable LP timer to modify CFGR */
102 ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
106 ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask,
113 /* Must (re)enable LP timer to modify CMP & ARR */
114 ret = regmap_write(priv->regmap, STM32_LPTIM_CR,
120 ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, prd - 1);
124 ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, prd - (1 + dty));
128 /* ensure CMP & ARR registers are properly written */
129 ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
130 (val & STM32_LPTIM_CMPOK_ARROK),
133 dev_err(priv->chip.dev, "ARR/CMP registers write issue\n");
136 ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
137 STM32_LPTIM_CMPOKCF_ARROKCF);
142 /* Start LP timer in continuous mode */
143 ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CR,
145 STM32_LPTIM_CNTSTRT);
147 regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
155 clk_disable(priv->clk);
160 static void stm32_pwm_lp_get_state(struct pwm_chip *chip,
161 struct pwm_device *pwm,
162 struct pwm_state *state)
164 struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
165 unsigned long rate = clk_get_rate(priv->clk);
169 regmap_read(priv->regmap, STM32_LPTIM_CR, &val);
170 state->enabled = !!FIELD_GET(STM32_LPTIM_ENABLE, val);
171 /* Keep PWM counter clock refcount in sync with PWM initial state */
173 clk_enable(priv->clk);
175 regmap_read(priv->regmap, STM32_LPTIM_CFGR, &val);
176 presc = FIELD_GET(STM32_LPTIM_PRESC, val);
177 state->polarity = FIELD_GET(STM32_LPTIM_WAVPOL, val);
179 regmap_read(priv->regmap, STM32_LPTIM_ARR, &prd);
181 tmp = (tmp << presc) * NSEC_PER_SEC;
182 state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
184 regmap_read(priv->regmap, STM32_LPTIM_CMP, &val);
186 tmp = (tmp << presc) * NSEC_PER_SEC;
187 state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
190 static const struct pwm_ops stm32_pwm_lp_ops = {
191 .owner = THIS_MODULE,
192 .apply = stm32_pwm_lp_apply,
193 .get_state = stm32_pwm_lp_get_state,
196 static int stm32_pwm_lp_probe(struct platform_device *pdev)
198 struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
199 struct stm32_pwm_lp *priv;
202 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
206 priv->regmap = ddata->regmap;
207 priv->clk = ddata->clk;
208 priv->chip.dev = &pdev->dev;
209 priv->chip.ops = &stm32_pwm_lp_ops;
212 ret = devm_pwmchip_add(&pdev->dev, &priv->chip);
216 platform_set_drvdata(pdev, priv);
221 static int __maybe_unused stm32_pwm_lp_suspend(struct device *dev)
223 struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
224 struct pwm_state state;
226 pwm_get_state(&priv->chip.pwms[0], &state);
228 dev_err(dev, "The consumer didn't stop us (%s)\n",
229 priv->chip.pwms[0].label);
233 return pinctrl_pm_select_sleep_state(dev);
236 static int __maybe_unused stm32_pwm_lp_resume(struct device *dev)
238 return pinctrl_pm_select_default_state(dev);
241 static SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend,
242 stm32_pwm_lp_resume);
244 static const struct of_device_id stm32_pwm_lp_of_match[] = {
245 { .compatible = "st,stm32-pwm-lp", },
248 MODULE_DEVICE_TABLE(of, stm32_pwm_lp_of_match);
250 static struct platform_driver stm32_pwm_lp_driver = {
251 .probe = stm32_pwm_lp_probe,
253 .name = "stm32-pwm-lp",
254 .of_match_table = of_match_ptr(stm32_pwm_lp_of_match),
255 .pm = &stm32_pwm_lp_pm_ops,
258 module_platform_driver(stm32_pwm_lp_driver);
260 MODULE_ALIAS("platform:stm32-pwm-lp");
261 MODULE_DESCRIPTION("STMicroelectronics STM32 PWM LP driver");
262 MODULE_LICENSE("GPL v2");