imx8mm-cl-iot-gate-optee: align config with Kconfig
[platform/kernel/u-boot.git] / drivers / pwm / Kconfig
1 config DM_PWM
2         bool "Enable support for pulse-width modulation devices (PWM)"
3         depends on DM
4         help
5           A pulse-width modulator emits a pulse of varying width and provides
6           control over the duty cycle (high and low time) of the signal. This
7           is often used to control a voltage level. The more time the PWM
8           spends in the 'high' state, the higher the voltage. The PWM's
9           frequency/period can be controlled along with the proportion of that
10           time that the signal is high.
11
12 config PWM_CROS_EC
13         bool "Enable support for the Chrome OS EC PWM"
14         depends on DM_PWM
15         help
16           This PWM is found on several Chrome OS devices and controlled by
17           the Chrome OS embedded controller. It may be used to control the
18           screen brightness and/or the keyboard backlight depending on the
19           device.
20
21 config PWM_EXYNOS
22         bool "Enable support for the Exynos PWM"
23         depends on DM_PWM
24         help
25           This PWM is found on Samsung Exynos 5250 and other Samsung SoCs. It
26           supports a programmable period and duty cycle. A 32-bit counter is
27           used. It provides 5 channels which can be independently
28           programmed. Channel 4 (the last) is normally used as a timer.
29
30 config PWM_IMX
31         bool "Enable support for i.MX27 and later PWM"
32         help
33           This PWM is found i.MX27 and later i.MX SoCs.
34
35 config PWM_MESON
36         bool "Enable support for Amlogic Meson SoCs PWM"
37         depends on DM_PWM
38         help
39           This PWM is found on Amlogic Meson SoCs. It supports a
40           programmable period and duty cycle for 2 independant channels.
41
42 config PWM_MTK
43         bool "Enable support for MediaTek PWM"
44         depends on DM_PWM
45         help
46           This PWM is found on MT7622, MT7623, and MT7629. It supports a
47           programmable period and duty cycle.
48
49 config PWM_ROCKCHIP
50         bool "Enable support for the Rockchip PWM"
51         depends on DM_PWM
52         help
53           This PWM is found on RK3288 and other Rockchip SoCs. It supports a
54           programmable period and duty cycle. A 32-bit counter is used.
55           Various options provided in the hardware (such as capture mode and
56           continuous/single-shot) are not supported by the driver.
57
58 config PWM_SANDBOX
59         bool "Enable support for the sandbox PWM"
60         help
61           This is a sandbox PWM used for testing. It provides 3 channels and
62           records the settings passed into it, but otherwise does nothing
63           useful. The PWM can be enabled but is not connected to any outputs
64           so this is not very useful.
65
66 config PWM_SIFIVE
67         bool "Enable support for SiFive PWM"
68         depends on DM_PWM
69         help
70           This PWM is found SiFive's FU540 and other SoCs.
71
72 config PWM_TEGRA
73         bool "Enable support for the Tegra PWM"
74         depends on DM_PWM
75         help
76           This PWM is found on Tegra 20 and other Nvidia SoCs. It supports
77           four channels with a programmable period and duty cycle. Only a
78           32KHz clock is supported by the driver but the duty cycle is
79           configurable.
80
81 config PWM_SUNXI
82         bool "Enable support for the Allwinner Sunxi PWM"
83         depends on DM_PWM
84         help
85           This PWM is found on H3, A64 and other Allwinner SoCs. It supports a
86           programmable period and duty cycle. A 16-bit counter is used.
87
88 config PWM_TI_EHRPWM
89         bool "Enable support for EHRPWM PWM"
90         depends on DM_PWM && ARCH_OMAP2PLUS
91         default y
92         help
93           PWM driver support for the EHRPWM controller found on TI SOCs.