Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel...
[platform/adaptation/renesas_rcar/renesas_kernel.git] / drivers / power / bq2415x_charger.c
1 /*
2  * bq2415x charger driver
3  *
4  * Copyright (C) 2011-2012  Pali Rohár <pali.rohar@gmail.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License along
17  * with this program; if not, write to the Free Software Foundation, Inc.,
18  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
19  */
20
21 /*
22  * Datasheets:
23  * http://www.ti.com/product/bq24150
24  * http://www.ti.com/product/bq24150a
25  * http://www.ti.com/product/bq24152
26  * http://www.ti.com/product/bq24153
27  * http://www.ti.com/product/bq24153a
28  * http://www.ti.com/product/bq24155
29  */
30
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/param.h>
34 #include <linux/err.h>
35 #include <linux/workqueue.h>
36 #include <linux/sysfs.h>
37 #include <linux/platform_device.h>
38 #include <linux/power_supply.h>
39 #include <linux/idr.h>
40 #include <linux/i2c.h>
41 #include <linux/slab.h>
42
43 #include <linux/power/bq2415x_charger.h>
44
45 /* timeout for resetting chip timer */
46 #define BQ2415X_TIMER_TIMEOUT           10
47
48 #define BQ2415X_REG_STATUS              0x00
49 #define BQ2415X_REG_CONTROL             0x01
50 #define BQ2415X_REG_VOLTAGE             0x02
51 #define BQ2415X_REG_VENDER              0x03
52 #define BQ2415X_REG_CURRENT             0x04
53
54 /* reset state for all registers */
55 #define BQ2415X_RESET_STATUS            BIT(6)
56 #define BQ2415X_RESET_CONTROL           (BIT(4)|BIT(5))
57 #define BQ2415X_RESET_VOLTAGE           (BIT(1)|BIT(3))
58 #define BQ2415X_RESET_CURRENT           (BIT(0)|BIT(3)|BIT(7))
59
60 /* status register */
61 #define BQ2415X_BIT_TMR_RST             7
62 #define BQ2415X_BIT_OTG                 7
63 #define BQ2415X_BIT_EN_STAT             6
64 #define BQ2415X_MASK_STAT               (BIT(4)|BIT(5))
65 #define BQ2415X_SHIFT_STAT              4
66 #define BQ2415X_BIT_BOOST               3
67 #define BQ2415X_MASK_FAULT              (BIT(0)|BIT(1)|BIT(2))
68 #define BQ2415X_SHIFT_FAULT             0
69
70 /* control register */
71 #define BQ2415X_MASK_LIMIT              (BIT(6)|BIT(7))
72 #define BQ2415X_SHIFT_LIMIT             6
73 #define BQ2415X_MASK_VLOWV              (BIT(4)|BIT(5))
74 #define BQ2415X_SHIFT_VLOWV             4
75 #define BQ2415X_BIT_TE                  3
76 #define BQ2415X_BIT_CE                  2
77 #define BQ2415X_BIT_HZ_MODE             1
78 #define BQ2415X_BIT_OPA_MODE            0
79
80 /* voltage register */
81 #define BQ2415X_MASK_VO         (BIT(2)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7))
82 #define BQ2415X_SHIFT_VO                2
83 #define BQ2415X_BIT_OTG_PL              1
84 #define BQ2415X_BIT_OTG_EN              0
85
86 /* vender register */
87 #define BQ2415X_MASK_VENDER             (BIT(5)|BIT(6)|BIT(7))
88 #define BQ2415X_SHIFT_VENDER            5
89 #define BQ2415X_MASK_PN                 (BIT(3)|BIT(4))
90 #define BQ2415X_SHIFT_PN                3
91 #define BQ2415X_MASK_REVISION           (BIT(0)|BIT(1)|BIT(2))
92 #define BQ2415X_SHIFT_REVISION          0
93
94 /* current register */
95 #define BQ2415X_MASK_RESET              BIT(7)
96 #define BQ2415X_MASK_VI_CHRG            (BIT(4)|BIT(5)|BIT(6))
97 #define BQ2415X_SHIFT_VI_CHRG           4
98 /* N/A                                  BIT(3) */
99 #define BQ2415X_MASK_VI_TERM            (BIT(0)|BIT(1)|BIT(2))
100 #define BQ2415X_SHIFT_VI_TERM           0
101
102
103 enum bq2415x_command {
104         BQ2415X_TIMER_RESET,
105         BQ2415X_OTG_STATUS,
106         BQ2415X_STAT_PIN_STATUS,
107         BQ2415X_STAT_PIN_ENABLE,
108         BQ2415X_STAT_PIN_DISABLE,
109         BQ2415X_CHARGE_STATUS,
110         BQ2415X_BOOST_STATUS,
111         BQ2415X_FAULT_STATUS,
112
113         BQ2415X_CHARGE_TERMINATION_STATUS,
114         BQ2415X_CHARGE_TERMINATION_ENABLE,
115         BQ2415X_CHARGE_TERMINATION_DISABLE,
116         BQ2415X_CHARGER_STATUS,
117         BQ2415X_CHARGER_ENABLE,
118         BQ2415X_CHARGER_DISABLE,
119         BQ2415X_HIGH_IMPEDANCE_STATUS,
120         BQ2415X_HIGH_IMPEDANCE_ENABLE,
121         BQ2415X_HIGH_IMPEDANCE_DISABLE,
122         BQ2415X_BOOST_MODE_STATUS,
123         BQ2415X_BOOST_MODE_ENABLE,
124         BQ2415X_BOOST_MODE_DISABLE,
125
126         BQ2415X_OTG_LEVEL,
127         BQ2415X_OTG_ACTIVATE_HIGH,
128         BQ2415X_OTG_ACTIVATE_LOW,
129         BQ2415X_OTG_PIN_STATUS,
130         BQ2415X_OTG_PIN_ENABLE,
131         BQ2415X_OTG_PIN_DISABLE,
132
133         BQ2415X_VENDER_CODE,
134         BQ2415X_PART_NUMBER,
135         BQ2415X_REVISION,
136 };
137
138 enum bq2415x_chip {
139         BQUNKNOWN,
140         BQ24150,
141         BQ24150A,
142         BQ24151,
143         BQ24151A,
144         BQ24152,
145         BQ24153,
146         BQ24153A,
147         BQ24155,
148         BQ24156,
149         BQ24156A,
150         BQ24158,
151 };
152
153 static char *bq2415x_chip_name[] = {
154         "unknown",
155         "bq24150",
156         "bq24150a",
157         "bq24151",
158         "bq24151a",
159         "bq24152",
160         "bq24153",
161         "bq24153a",
162         "bq24155",
163         "bq24156",
164         "bq24156a",
165         "bq24158",
166 };
167
168 struct bq2415x_device {
169         struct device *dev;
170         struct bq2415x_platform_data init_data;
171         struct power_supply charger;
172         struct delayed_work work;
173         enum bq2415x_mode reported_mode;/* mode reported by hook function */
174         enum bq2415x_mode mode;         /* current configured mode */
175         enum bq2415x_chip chip;
176         const char *timer_error;
177         char *model;
178         char *name;
179         int autotimer;  /* 1 - if driver automatically reset timer, 0 - not */
180         int automode;   /* 1 - enabled, 0 - disabled; -1 - not supported */
181         int id;
182 };
183
184 /* each registered chip must have unique id */
185 static DEFINE_IDR(bq2415x_id);
186
187 static DEFINE_MUTEX(bq2415x_id_mutex);
188 static DEFINE_MUTEX(bq2415x_timer_mutex);
189 static DEFINE_MUTEX(bq2415x_i2c_mutex);
190
191 /**** i2c read functions ****/
192
193 /* read value from register */
194 static int bq2415x_i2c_read(struct bq2415x_device *bq, u8 reg)
195 {
196         struct i2c_client *client = to_i2c_client(bq->dev);
197         struct i2c_msg msg[2];
198         u8 val;
199         int ret;
200
201         if (!client->adapter)
202                 return -ENODEV;
203
204         msg[0].addr = client->addr;
205         msg[0].flags = 0;
206         msg[0].buf = &reg;
207         msg[0].len = sizeof(reg);
208         msg[1].addr = client->addr;
209         msg[1].flags = I2C_M_RD;
210         msg[1].buf = &val;
211         msg[1].len = sizeof(val);
212
213         mutex_lock(&bq2415x_i2c_mutex);
214         ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
215         mutex_unlock(&bq2415x_i2c_mutex);
216
217         if (ret < 0)
218                 return ret;
219
220         return val;
221 }
222
223 /* read value from register, apply mask and right shift it */
224 static int bq2415x_i2c_read_mask(struct bq2415x_device *bq, u8 reg,
225                                  u8 mask, u8 shift)
226 {
227         int ret;
228
229         if (shift > 8)
230                 return -EINVAL;
231
232         ret = bq2415x_i2c_read(bq, reg);
233         if (ret < 0)
234                 return ret;
235         return (ret & mask) >> shift;
236 }
237
238 /* read value from register and return one specified bit */
239 static int bq2415x_i2c_read_bit(struct bq2415x_device *bq, u8 reg, u8 bit)
240 {
241         if (bit > 8)
242                 return -EINVAL;
243         return bq2415x_i2c_read_mask(bq, reg, BIT(bit), bit);
244 }
245
246 /**** i2c write functions ****/
247
248 /* write value to register */
249 static int bq2415x_i2c_write(struct bq2415x_device *bq, u8 reg, u8 val)
250 {
251         struct i2c_client *client = to_i2c_client(bq->dev);
252         struct i2c_msg msg[1];
253         u8 data[2];
254         int ret;
255
256         data[0] = reg;
257         data[1] = val;
258
259         msg[0].addr = client->addr;
260         msg[0].flags = 0;
261         msg[0].buf = data;
262         msg[0].len = ARRAY_SIZE(data);
263
264         mutex_lock(&bq2415x_i2c_mutex);
265         ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
266         mutex_unlock(&bq2415x_i2c_mutex);
267
268         /* i2c_transfer returns number of messages transferred */
269         if (ret < 0)
270                 return ret;
271         else if (ret != 1)
272                 return -EIO;
273
274         return 0;
275 }
276
277 /* read value from register, change it with mask left shifted and write back */
278 static int bq2415x_i2c_write_mask(struct bq2415x_device *bq, u8 reg, u8 val,
279                                   u8 mask, u8 shift)
280 {
281         int ret;
282
283         if (shift > 8)
284                 return -EINVAL;
285
286         ret = bq2415x_i2c_read(bq, reg);
287         if (ret < 0)
288                 return ret;
289
290         ret &= ~mask;
291         ret |= val << shift;
292
293         return bq2415x_i2c_write(bq, reg, ret);
294 }
295
296 /* change only one bit in register */
297 static int bq2415x_i2c_write_bit(struct bq2415x_device *bq, u8 reg,
298                                  bool val, u8 bit)
299 {
300         if (bit > 8)
301                 return -EINVAL;
302         return bq2415x_i2c_write_mask(bq, reg, val, BIT(bit), bit);
303 }
304
305 /**** global functions ****/
306
307 /* exec command function */
308 static int bq2415x_exec_command(struct bq2415x_device *bq,
309                                 enum bq2415x_command command)
310 {
311         int ret;
312
313         switch (command) {
314         case BQ2415X_TIMER_RESET:
315                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS,
316                                 1, BQ2415X_BIT_TMR_RST);
317         case BQ2415X_OTG_STATUS:
318                 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
319                                 BQ2415X_BIT_OTG);
320         case BQ2415X_STAT_PIN_STATUS:
321                 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
322                                 BQ2415X_BIT_EN_STAT);
323         case BQ2415X_STAT_PIN_ENABLE:
324                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 1,
325                                 BQ2415X_BIT_EN_STAT);
326         case BQ2415X_STAT_PIN_DISABLE:
327                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 0,
328                                 BQ2415X_BIT_EN_STAT);
329         case BQ2415X_CHARGE_STATUS:
330                 return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS,
331                                 BQ2415X_MASK_STAT, BQ2415X_SHIFT_STAT);
332         case BQ2415X_BOOST_STATUS:
333                 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
334                                 BQ2415X_BIT_BOOST);
335         case BQ2415X_FAULT_STATUS:
336                 return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS,
337                         BQ2415X_MASK_FAULT, BQ2415X_SHIFT_FAULT);
338
339         case BQ2415X_CHARGE_TERMINATION_STATUS:
340                 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
341                                 BQ2415X_BIT_TE);
342         case BQ2415X_CHARGE_TERMINATION_ENABLE:
343                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
344                                 1, BQ2415X_BIT_TE);
345         case BQ2415X_CHARGE_TERMINATION_DISABLE:
346                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
347                                 0, BQ2415X_BIT_TE);
348         case BQ2415X_CHARGER_STATUS:
349                 ret = bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
350                         BQ2415X_BIT_CE);
351                 if (ret < 0)
352                         return ret;
353                 else
354                         return ret > 0 ? 0 : 1;
355         case BQ2415X_CHARGER_ENABLE:
356                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
357                                 0, BQ2415X_BIT_CE);
358         case BQ2415X_CHARGER_DISABLE:
359                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
360                                 1, BQ2415X_BIT_CE);
361         case BQ2415X_HIGH_IMPEDANCE_STATUS:
362                 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
363                                 BQ2415X_BIT_HZ_MODE);
364         case BQ2415X_HIGH_IMPEDANCE_ENABLE:
365                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
366                                 1, BQ2415X_BIT_HZ_MODE);
367         case BQ2415X_HIGH_IMPEDANCE_DISABLE:
368                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
369                                 0, BQ2415X_BIT_HZ_MODE);
370         case BQ2415X_BOOST_MODE_STATUS:
371                 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
372                                 BQ2415X_BIT_OPA_MODE);
373         case BQ2415X_BOOST_MODE_ENABLE:
374                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
375                                 1, BQ2415X_BIT_OPA_MODE);
376         case BQ2415X_BOOST_MODE_DISABLE:
377                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
378                                 0, BQ2415X_BIT_OPA_MODE);
379
380         case BQ2415X_OTG_LEVEL:
381                 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE,
382                                 BQ2415X_BIT_OTG_PL);
383         case BQ2415X_OTG_ACTIVATE_HIGH:
384                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
385                                 1, BQ2415X_BIT_OTG_PL);
386         case BQ2415X_OTG_ACTIVATE_LOW:
387                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
388                                 0, BQ2415X_BIT_OTG_PL);
389         case BQ2415X_OTG_PIN_STATUS:
390                 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE,
391                                 BQ2415X_BIT_OTG_EN);
392         case BQ2415X_OTG_PIN_ENABLE:
393                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
394                                 1, BQ2415X_BIT_OTG_EN);
395         case BQ2415X_OTG_PIN_DISABLE:
396                 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
397                                 0, BQ2415X_BIT_OTG_EN);
398
399         case BQ2415X_VENDER_CODE:
400                 return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
401                         BQ2415X_MASK_VENDER, BQ2415X_SHIFT_VENDER);
402         case BQ2415X_PART_NUMBER:
403                 return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
404                                 BQ2415X_MASK_PN, BQ2415X_SHIFT_PN);
405         case BQ2415X_REVISION:
406                 return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
407                         BQ2415X_MASK_REVISION, BQ2415X_SHIFT_REVISION);
408         }
409         return -EINVAL;
410 }
411
412 /* detect chip type */
413 static enum bq2415x_chip bq2415x_detect_chip(struct bq2415x_device *bq)
414 {
415         struct i2c_client *client = to_i2c_client(bq->dev);
416         int ret = bq2415x_exec_command(bq, BQ2415X_PART_NUMBER);
417
418         if (ret < 0)
419                 return ret;
420
421         switch (client->addr) {
422         case 0x6b:
423                 switch (ret) {
424                 case 0:
425                         if (bq->chip == BQ24151A)
426                                 return bq->chip;
427                         else
428                                 return BQ24151;
429                 case 1:
430                         if (bq->chip == BQ24150A ||
431                                 bq->chip == BQ24152 ||
432                                 bq->chip == BQ24155)
433                                 return bq->chip;
434                         else
435                                 return BQ24150;
436                 case 2:
437                         if (bq->chip == BQ24153A)
438                                 return bq->chip;
439                         else
440                                 return BQ24153;
441                 default:
442                         return BQUNKNOWN;
443                 }
444                 break;
445
446         case 0x6a:
447                 switch (ret) {
448                 case 0:
449                         if (bq->chip == BQ24156A)
450                                 return bq->chip;
451                         else
452                                 return BQ24156;
453                 case 2:
454                         return BQ24158;
455                 default:
456                         return BQUNKNOWN;
457                 }
458                 break;
459         }
460
461         return BQUNKNOWN;
462 }
463
464 /* detect chip revision */
465 static int bq2415x_detect_revision(struct bq2415x_device *bq)
466 {
467         int ret = bq2415x_exec_command(bq, BQ2415X_REVISION);
468         int chip = bq2415x_detect_chip(bq);
469
470         if (ret < 0 || chip < 0)
471                 return -1;
472
473         switch (chip) {
474         case BQ24150:
475         case BQ24150A:
476         case BQ24151:
477         case BQ24151A:
478         case BQ24152:
479                 if (ret >= 0 && ret <= 3)
480                         return ret;
481                 else
482                         return -1;
483         case BQ24153:
484         case BQ24153A:
485         case BQ24156:
486         case BQ24156A:
487         case BQ24158:
488                 if (ret == 3)
489                         return 0;
490                 else if (ret == 1)
491                         return 1;
492                 else
493                         return -1;
494         case BQ24155:
495                 if (ret == 3)
496                         return 3;
497                 else
498                         return -1;
499         case BQUNKNOWN:
500                 return -1;
501         }
502
503         return -1;
504 }
505
506 /* return chip vender code */
507 static int bq2415x_get_vender_code(struct bq2415x_device *bq)
508 {
509         int ret;
510
511         ret = bq2415x_exec_command(bq, BQ2415X_VENDER_CODE);
512         if (ret < 0)
513                 return 0;
514
515         /* convert to binary */
516         return (ret & 0x1) +
517                ((ret >> 1) & 0x1) * 10 +
518                ((ret >> 2) & 0x1) * 100;
519 }
520
521 /* reset all chip registers to default state */
522 static void bq2415x_reset_chip(struct bq2415x_device *bq)
523 {
524         bq2415x_i2c_write(bq, BQ2415X_REG_CURRENT, BQ2415X_RESET_CURRENT);
525         bq2415x_i2c_write(bq, BQ2415X_REG_VOLTAGE, BQ2415X_RESET_VOLTAGE);
526         bq2415x_i2c_write(bq, BQ2415X_REG_CONTROL, BQ2415X_RESET_CONTROL);
527         bq2415x_i2c_write(bq, BQ2415X_REG_STATUS, BQ2415X_RESET_STATUS);
528         bq->timer_error = NULL;
529 }
530
531 /**** properties functions ****/
532
533 /* set current limit in mA */
534 static int bq2415x_set_current_limit(struct bq2415x_device *bq, int mA)
535 {
536         int val;
537
538         if (mA <= 100)
539                 val = 0;
540         else if (mA <= 500)
541                 val = 1;
542         else if (mA <= 800)
543                 val = 2;
544         else
545                 val = 3;
546
547         return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val,
548                         BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT);
549 }
550
551 /* get current limit in mA */
552 static int bq2415x_get_current_limit(struct bq2415x_device *bq)
553 {
554         int ret;
555
556         ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL,
557                         BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT);
558         if (ret < 0)
559                 return ret;
560         else if (ret == 0)
561                 return 100;
562         else if (ret == 1)
563                 return 500;
564         else if (ret == 2)
565                 return 800;
566         else if (ret == 3)
567                 return 1800;
568         return -EINVAL;
569 }
570
571 /* set weak battery voltage in mV */
572 static int bq2415x_set_weak_battery_voltage(struct bq2415x_device *bq, int mV)
573 {
574         int val;
575
576         /* round to 100mV */
577         if (mV <= 3400 + 50)
578                 val = 0;
579         else if (mV <= 3500 + 50)
580                 val = 1;
581         else if (mV <= 3600 + 50)
582                 val = 2;
583         else
584                 val = 3;
585
586         return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val,
587                         BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV);
588 }
589
590 /* get weak battery voltage in mV */
591 static int bq2415x_get_weak_battery_voltage(struct bq2415x_device *bq)
592 {
593         int ret;
594
595         ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL,
596                         BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV);
597         if (ret < 0)
598                 return ret;
599         return 100 * (34 + ret);
600 }
601
602 /* set battery regulation voltage in mV */
603 static int bq2415x_set_battery_regulation_voltage(struct bq2415x_device *bq,
604                                                   int mV)
605 {
606         int val = (mV/10 - 350) / 2;
607
608         if (val < 0)
609                 val = 0;
610         else if (val > 94) /* FIXME: Max is 94 or 122 ? Set max value ? */
611                 return -EINVAL;
612
613         return bq2415x_i2c_write_mask(bq, BQ2415X_REG_VOLTAGE, val,
614                         BQ2415X_MASK_VO, BQ2415X_SHIFT_VO);
615 }
616
617 /* get battery regulation voltage in mV */
618 static int bq2415x_get_battery_regulation_voltage(struct bq2415x_device *bq)
619 {
620         int ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_VOLTAGE,
621                         BQ2415X_MASK_VO, BQ2415X_SHIFT_VO);
622
623         if (ret < 0)
624                 return ret;
625         return 10 * (350 + 2*ret);
626 }
627
628 /* set charge current in mA (platform data must provide resistor sense) */
629 static int bq2415x_set_charge_current(struct bq2415x_device *bq, int mA)
630 {
631         int val;
632
633         if (bq->init_data.resistor_sense <= 0)
634                 return -ENOSYS;
635
636         val = (mA * bq->init_data.resistor_sense - 37400) / 6800;
637         if (val < 0)
638                 val = 0;
639         else if (val > 7)
640                 val = 7;
641
642         return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val,
643                         BQ2415X_MASK_VI_CHRG | BQ2415X_MASK_RESET,
644                         BQ2415X_SHIFT_VI_CHRG);
645 }
646
647 /* get charge current in mA (platform data must provide resistor sense) */
648 static int bq2415x_get_charge_current(struct bq2415x_device *bq)
649 {
650         int ret;
651
652         if (bq->init_data.resistor_sense <= 0)
653                 return -ENOSYS;
654
655         ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
656                         BQ2415X_MASK_VI_CHRG, BQ2415X_SHIFT_VI_CHRG);
657         if (ret < 0)
658                 return ret;
659         return (37400 + 6800*ret) / bq->init_data.resistor_sense;
660 }
661
662 /* set termination current in mA (platform data must provide resistor sense) */
663 static int bq2415x_set_termination_current(struct bq2415x_device *bq, int mA)
664 {
665         int val;
666
667         if (bq->init_data.resistor_sense <= 0)
668                 return -ENOSYS;
669
670         val = (mA * bq->init_data.resistor_sense - 3400) / 3400;
671         if (val < 0)
672                 val = 0;
673         else if (val > 7)
674                 val = 7;
675
676         return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val,
677                         BQ2415X_MASK_VI_TERM | BQ2415X_MASK_RESET,
678                         BQ2415X_SHIFT_VI_TERM);
679 }
680
681 /* get termination current in mA (platform data must provide resistor sense) */
682 static int bq2415x_get_termination_current(struct bq2415x_device *bq)
683 {
684         int ret;
685
686         if (bq->init_data.resistor_sense <= 0)
687                 return -ENOSYS;
688
689         ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
690                         BQ2415X_MASK_VI_TERM, BQ2415X_SHIFT_VI_TERM);
691         if (ret < 0)
692                 return ret;
693         return (3400 + 3400*ret) / bq->init_data.resistor_sense;
694 }
695
696 /* set default value of property */
697 #define bq2415x_set_default_value(bq, prop) \
698         do { \
699                 int ret = 0; \
700                 if (bq->init_data.prop != -1) \
701                         ret = bq2415x_set_##prop(bq, bq->init_data.prop); \
702                 if (ret < 0) \
703                         return ret; \
704         } while (0)
705
706 /* set default values of all properties */
707 static int bq2415x_set_defaults(struct bq2415x_device *bq)
708 {
709         bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE);
710         bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
711         bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_DISABLE);
712
713         bq2415x_set_default_value(bq, current_limit);
714         bq2415x_set_default_value(bq, weak_battery_voltage);
715         bq2415x_set_default_value(bq, battery_regulation_voltage);
716
717         if (bq->init_data.resistor_sense > 0) {
718                 bq2415x_set_default_value(bq, charge_current);
719                 bq2415x_set_default_value(bq, termination_current);
720                 bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_ENABLE);
721         }
722
723         bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE);
724         return 0;
725 }
726
727 /**** charger mode functions ****/
728
729 /* set charger mode */
730 static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode)
731 {
732         int ret = 0;
733         int charger = 0;
734         int boost = 0;
735
736         if (mode == BQ2415X_MODE_BOOST)
737                 boost = 1;
738         else if (mode != BQ2415X_MODE_OFF)
739                 charger = 1;
740
741         if (!charger)
742                 ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
743
744         if (!boost)
745                 ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE);
746
747         if (ret < 0)
748                 return ret;
749
750         switch (mode) {
751         case BQ2415X_MODE_OFF:
752                 dev_dbg(bq->dev, "changing mode to: Offline\n");
753                 ret = bq2415x_set_current_limit(bq, 100);
754                 break;
755         case BQ2415X_MODE_NONE:
756                 dev_dbg(bq->dev, "changing mode to: N/A\n");
757                 ret = bq2415x_set_current_limit(bq, 100);
758                 break;
759         case BQ2415X_MODE_HOST_CHARGER:
760                 dev_dbg(bq->dev, "changing mode to: Host/HUB charger\n");
761                 ret = bq2415x_set_current_limit(bq, 500);
762                 break;
763         case BQ2415X_MODE_DEDICATED_CHARGER:
764                 dev_dbg(bq->dev, "changing mode to: Dedicated charger\n");
765                 ret = bq2415x_set_current_limit(bq, 1800);
766                 break;
767         case BQ2415X_MODE_BOOST: /* Boost mode */
768                 dev_dbg(bq->dev, "changing mode to: Boost\n");
769                 ret = bq2415x_set_current_limit(bq, 100);
770                 break;
771         }
772
773         if (ret < 0)
774                 return ret;
775
776         if (charger)
777                 ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE);
778         else if (boost)
779                 ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_ENABLE);
780
781         if (ret < 0)
782                 return ret;
783
784         bq2415x_set_default_value(bq, weak_battery_voltage);
785         bq2415x_set_default_value(bq, battery_regulation_voltage);
786
787         bq->mode = mode;
788         sysfs_notify(&bq->charger.dev->kobj, NULL, "mode");
789
790         return 0;
791
792 }
793
794 /* hook function called by other driver which set reported mode */
795 static void bq2415x_hook_function(enum bq2415x_mode mode, void *data)
796 {
797         struct bq2415x_device *bq = data;
798
799         if (!bq)
800                 return;
801
802         dev_dbg(bq->dev, "hook function was called\n");
803         bq->reported_mode = mode;
804
805         /* if automode is not enabled do not tell about reported_mode */
806         if (bq->automode < 1)
807                 return;
808
809         sysfs_notify(&bq->charger.dev->kobj, NULL, "reported_mode");
810         bq2415x_set_mode(bq, bq->reported_mode);
811
812 }
813
814 /**** timer functions ****/
815
816 /* enable/disable auto resetting chip timer */
817 static void bq2415x_set_autotimer(struct bq2415x_device *bq, int state)
818 {
819         mutex_lock(&bq2415x_timer_mutex);
820
821         if (bq->autotimer == state) {
822                 mutex_unlock(&bq2415x_timer_mutex);
823                 return;
824         }
825
826         bq->autotimer = state;
827
828         if (state) {
829                 schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ);
830                 bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
831                 bq->timer_error = NULL;
832         } else {
833                 cancel_delayed_work_sync(&bq->work);
834         }
835
836         mutex_unlock(&bq2415x_timer_mutex);
837 }
838
839 /* called by bq2415x_timer_work on timer error */
840 static void bq2415x_timer_error(struct bq2415x_device *bq, const char *msg)
841 {
842         bq->timer_error = msg;
843         sysfs_notify(&bq->charger.dev->kobj, NULL, "timer");
844         dev_err(bq->dev, "%s\n", msg);
845         if (bq->automode > 0)
846                 bq->automode = 0;
847         bq2415x_set_mode(bq, BQ2415X_MODE_OFF);
848         bq2415x_set_autotimer(bq, 0);
849 }
850
851 /* delayed work function for auto resetting chip timer */
852 static void bq2415x_timer_work(struct work_struct *work)
853 {
854         struct bq2415x_device *bq = container_of(work, struct bq2415x_device,
855                                                  work.work);
856         int ret;
857         int error;
858         int boost;
859
860         if (!bq->autotimer)
861                 return;
862
863         ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
864         if (ret < 0) {
865                 bq2415x_timer_error(bq, "Resetting timer failed");
866                 return;
867         }
868
869         boost = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_STATUS);
870         if (boost < 0) {
871                 bq2415x_timer_error(bq, "Unknown error");
872                 return;
873         }
874
875         error = bq2415x_exec_command(bq, BQ2415X_FAULT_STATUS);
876         if (error < 0) {
877                 bq2415x_timer_error(bq, "Unknown error");
878                 return;
879         }
880
881         if (boost) {
882                 switch (error) {
883                 /* Non fatal errors, chip is OK */
884                 case 0: /* No error */
885                         break;
886                 case 6: /* Timer expired */
887                         dev_err(bq->dev, "Timer expired\n");
888                         break;
889                 case 3: /* Battery voltage too low */
890                         dev_err(bq->dev, "Battery voltage to low\n");
891                         break;
892
893                 /* Fatal errors, disable and reset chip */
894                 case 1: /* Overvoltage protection (chip fried) */
895                         bq2415x_timer_error(bq,
896                                 "Overvoltage protection (chip fried)");
897                         return;
898                 case 2: /* Overload */
899                         bq2415x_timer_error(bq, "Overload");
900                         return;
901                 case 4: /* Battery overvoltage protection */
902                         bq2415x_timer_error(bq,
903                                 "Battery overvoltage protection");
904                         return;
905                 case 5: /* Thermal shutdown (too hot) */
906                         bq2415x_timer_error(bq,
907                                         "Thermal shutdown (too hot)");
908                         return;
909                 case 7: /* N/A */
910                         bq2415x_timer_error(bq, "Unknown error");
911                         return;
912                 }
913         } else {
914                 switch (error) {
915                 /* Non fatal errors, chip is OK */
916                 case 0: /* No error */
917                         break;
918                 case 2: /* Sleep mode */
919                         dev_err(bq->dev, "Sleep mode\n");
920                         break;
921                 case 3: /* Poor input source */
922                         dev_err(bq->dev, "Poor input source\n");
923                         break;
924                 case 6: /* Timer expired */
925                         dev_err(bq->dev, "Timer expired\n");
926                         break;
927                 case 7: /* No battery */
928                         dev_err(bq->dev, "No battery\n");
929                         break;
930
931                 /* Fatal errors, disable and reset chip */
932                 case 1: /* Overvoltage protection (chip fried) */
933                         bq2415x_timer_error(bq,
934                                 "Overvoltage protection (chip fried)");
935                         return;
936                 case 4: /* Battery overvoltage protection */
937                         bq2415x_timer_error(bq,
938                                 "Battery overvoltage protection");
939                         return;
940                 case 5: /* Thermal shutdown (too hot) */
941                         bq2415x_timer_error(bq,
942                                 "Thermal shutdown (too hot)");
943                         return;
944                 }
945         }
946
947         schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ);
948 }
949
950 /**** power supply interface code ****/
951
952 static enum power_supply_property bq2415x_power_supply_props[] = {
953         /* TODO: maybe add more power supply properties */
954         POWER_SUPPLY_PROP_STATUS,
955         POWER_SUPPLY_PROP_MODEL_NAME,
956 };
957
958 static int bq2415x_power_supply_get_property(struct power_supply *psy,
959                                              enum power_supply_property psp,
960                                              union power_supply_propval *val)
961 {
962         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
963                                                  charger);
964         int ret;
965
966         switch (psp) {
967         case POWER_SUPPLY_PROP_STATUS:
968                 ret = bq2415x_exec_command(bq, BQ2415X_CHARGE_STATUS);
969                 if (ret < 0)
970                         return ret;
971                 else if (ret == 0) /* Ready */
972                         val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
973                 else if (ret == 1) /* Charge in progress */
974                         val->intval = POWER_SUPPLY_STATUS_CHARGING;
975                 else if (ret == 2) /* Charge done */
976                         val->intval = POWER_SUPPLY_STATUS_FULL;
977                 else
978                         val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
979                 break;
980         case POWER_SUPPLY_PROP_MODEL_NAME:
981                 val->strval = bq->model;
982                 break;
983         default:
984                 return -EINVAL;
985         }
986         return 0;
987 }
988
989 static int bq2415x_power_supply_init(struct bq2415x_device *bq)
990 {
991         int ret;
992         int chip;
993         char revstr[8];
994
995         bq->charger.name = bq->name;
996         bq->charger.type = POWER_SUPPLY_TYPE_USB;
997         bq->charger.properties = bq2415x_power_supply_props;
998         bq->charger.num_properties = ARRAY_SIZE(bq2415x_power_supply_props);
999         bq->charger.get_property = bq2415x_power_supply_get_property;
1000
1001         ret = bq2415x_detect_chip(bq);
1002         if (ret < 0)
1003                 chip = BQUNKNOWN;
1004         else
1005                 chip = ret;
1006
1007         ret = bq2415x_detect_revision(bq);
1008         if (ret < 0)
1009                 strcpy(revstr, "unknown");
1010         else
1011                 sprintf(revstr, "1.%d", ret);
1012
1013         bq->model = kasprintf(GFP_KERNEL,
1014                                 "chip %s, revision %s, vender code %.3d",
1015                                 bq2415x_chip_name[chip], revstr,
1016                                 bq2415x_get_vender_code(bq));
1017         if (!bq->model) {
1018                 dev_err(bq->dev, "failed to allocate model name\n");
1019                 return -ENOMEM;
1020         }
1021
1022         ret = power_supply_register(bq->dev, &bq->charger);
1023         if (ret) {
1024                 kfree(bq->model);
1025                 return ret;
1026         }
1027
1028         return 0;
1029 }
1030
1031 static void bq2415x_power_supply_exit(struct bq2415x_device *bq)
1032 {
1033         bq->autotimer = 0;
1034         if (bq->automode > 0)
1035                 bq->automode = 0;
1036         cancel_delayed_work_sync(&bq->work);
1037         power_supply_unregister(&bq->charger);
1038         kfree(bq->model);
1039 }
1040
1041 /**** additional sysfs entries for power supply interface ****/
1042
1043 /* show *_status entries */
1044 static ssize_t bq2415x_sysfs_show_status(struct device *dev,
1045                                          struct device_attribute *attr,
1046                                          char *buf)
1047 {
1048         struct power_supply *psy = dev_get_drvdata(dev);
1049         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1050                                                 charger);
1051         enum bq2415x_command command;
1052         int ret;
1053
1054         if (strcmp(attr->attr.name, "otg_status") == 0)
1055                 command = BQ2415X_OTG_STATUS;
1056         else if (strcmp(attr->attr.name, "charge_status") == 0)
1057                 command = BQ2415X_CHARGE_STATUS;
1058         else if (strcmp(attr->attr.name, "boost_status") == 0)
1059                 command = BQ2415X_BOOST_STATUS;
1060         else if (strcmp(attr->attr.name, "fault_status") == 0)
1061                 command = BQ2415X_FAULT_STATUS;
1062         else
1063                 return -EINVAL;
1064
1065         ret = bq2415x_exec_command(bq, command);
1066         if (ret < 0)
1067                 return ret;
1068         return sprintf(buf, "%d\n", ret);
1069 }
1070
1071 /*
1072  * set timer entry:
1073  *    auto - enable auto mode
1074  *    off - disable auto mode
1075  *    (other values) - reset chip timer
1076  */
1077 static ssize_t bq2415x_sysfs_set_timer(struct device *dev,
1078                                        struct device_attribute *attr,
1079                                        const char *buf,
1080                                        size_t count)
1081 {
1082         struct power_supply *psy = dev_get_drvdata(dev);
1083         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1084                                                 charger);
1085         int ret = 0;
1086
1087         if (strncmp(buf, "auto", 4) == 0)
1088                 bq2415x_set_autotimer(bq, 1);
1089         else if (strncmp(buf, "off", 3) == 0)
1090                 bq2415x_set_autotimer(bq, 0);
1091         else
1092                 ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
1093
1094         if (ret < 0)
1095                 return ret;
1096         return count;
1097 }
1098
1099 /* show timer entry (auto or off) */
1100 static ssize_t bq2415x_sysfs_show_timer(struct device *dev,
1101                                         struct device_attribute *attr,
1102                                         char *buf)
1103 {
1104         struct power_supply *psy = dev_get_drvdata(dev);
1105         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1106                                                  charger);
1107
1108         if (bq->timer_error)
1109                 return sprintf(buf, "%s\n", bq->timer_error);
1110
1111         if (bq->autotimer)
1112                 return sprintf(buf, "auto\n");
1113         return sprintf(buf, "off\n");
1114 }
1115
1116 /*
1117  * set mode entry:
1118  *    auto - if automode is supported, enable it and set mode to reported
1119  *    none - disable charger and boost mode
1120  *    host - charging mode for host/hub chargers (current limit 500mA)
1121  *    dedicated - charging mode for dedicated chargers (unlimited current limit)
1122  *    boost - disable charger and enable boost mode
1123  */
1124 static ssize_t bq2415x_sysfs_set_mode(struct device *dev,
1125                                       struct device_attribute *attr,
1126                                       const char *buf,
1127                                       size_t count)
1128 {
1129         struct power_supply *psy = dev_get_drvdata(dev);
1130         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1131                                                  charger);
1132         enum bq2415x_mode mode;
1133         int ret = 0;
1134
1135         if (strncmp(buf, "auto", 4) == 0) {
1136                 if (bq->automode < 0)
1137                         return -ENOSYS;
1138                 bq->automode = 1;
1139                 mode = bq->reported_mode;
1140         } else if (strncmp(buf, "off", 3) == 0) {
1141                 if (bq->automode > 0)
1142                         bq->automode = 0;
1143                 mode = BQ2415X_MODE_OFF;
1144         } else if (strncmp(buf, "none", 4) == 0) {
1145                 if (bq->automode > 0)
1146                         bq->automode = 0;
1147                 mode = BQ2415X_MODE_NONE;
1148         } else if (strncmp(buf, "host", 4) == 0) {
1149                 if (bq->automode > 0)
1150                         bq->automode = 0;
1151                 mode = BQ2415X_MODE_HOST_CHARGER;
1152         } else if (strncmp(buf, "dedicated", 9) == 0) {
1153                 if (bq->automode > 0)
1154                         bq->automode = 0;
1155                 mode = BQ2415X_MODE_DEDICATED_CHARGER;
1156         } else if (strncmp(buf, "boost", 5) == 0) {
1157                 if (bq->automode > 0)
1158                         bq->automode = 0;
1159                 mode = BQ2415X_MODE_BOOST;
1160         } else if (strncmp(buf, "reset", 5) == 0) {
1161                 bq2415x_reset_chip(bq);
1162                 bq2415x_set_defaults(bq);
1163                 if (bq->automode <= 0)
1164                         return count;
1165                 bq->automode = 1;
1166                 mode = bq->reported_mode;
1167         } else {
1168                 return -EINVAL;
1169         }
1170
1171         ret = bq2415x_set_mode(bq, mode);
1172         if (ret < 0)
1173                 return ret;
1174         return count;
1175 }
1176
1177 /* show mode entry (auto, none, host, dedicated or boost) */
1178 static ssize_t bq2415x_sysfs_show_mode(struct device *dev,
1179                                        struct device_attribute *attr,
1180                                        char *buf)
1181 {
1182         struct power_supply *psy = dev_get_drvdata(dev);
1183         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1184                                                 charger);
1185         ssize_t ret = 0;
1186
1187         if (bq->automode > 0)
1188                 ret += sprintf(buf+ret, "auto (");
1189
1190         switch (bq->mode) {
1191         case BQ2415X_MODE_OFF:
1192                 ret += sprintf(buf+ret, "off");
1193                 break;
1194         case BQ2415X_MODE_NONE:
1195                 ret += sprintf(buf+ret, "none");
1196                 break;
1197         case BQ2415X_MODE_HOST_CHARGER:
1198                 ret += sprintf(buf+ret, "host");
1199                 break;
1200         case BQ2415X_MODE_DEDICATED_CHARGER:
1201                 ret += sprintf(buf+ret, "dedicated");
1202                 break;
1203         case BQ2415X_MODE_BOOST:
1204                 ret += sprintf(buf+ret, "boost");
1205                 break;
1206         }
1207
1208         if (bq->automode > 0)
1209                 ret += sprintf(buf+ret, ")");
1210
1211         ret += sprintf(buf+ret, "\n");
1212         return ret;
1213 }
1214
1215 /* show reported_mode entry (none, host, dedicated or boost) */
1216 static ssize_t bq2415x_sysfs_show_reported_mode(struct device *dev,
1217                                                 struct device_attribute *attr,
1218                                                 char *buf)
1219 {
1220         struct power_supply *psy = dev_get_drvdata(dev);
1221         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1222                                                  charger);
1223
1224         if (bq->automode < 0)
1225                 return -EINVAL;
1226
1227         switch (bq->reported_mode) {
1228         case BQ2415X_MODE_OFF:
1229                 return sprintf(buf, "off\n");
1230         case BQ2415X_MODE_NONE:
1231                 return sprintf(buf, "none\n");
1232         case BQ2415X_MODE_HOST_CHARGER:
1233                 return sprintf(buf, "host\n");
1234         case BQ2415X_MODE_DEDICATED_CHARGER:
1235                 return sprintf(buf, "dedicated\n");
1236         case BQ2415X_MODE_BOOST:
1237                 return sprintf(buf, "boost\n");
1238         }
1239
1240         return -EINVAL;
1241 }
1242
1243 /* directly set raw value to chip register, format: 'register value' */
1244 static ssize_t bq2415x_sysfs_set_registers(struct device *dev,
1245                                            struct device_attribute *attr,
1246                                            const char *buf,
1247                                            size_t count)
1248 {
1249         struct power_supply *psy = dev_get_drvdata(dev);
1250         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1251                                                  charger);
1252         ssize_t ret = 0;
1253         unsigned int reg;
1254         unsigned int val;
1255
1256         if (sscanf(buf, "%x %x", &reg, &val) != 2)
1257                 return -EINVAL;
1258
1259         if (reg > 4 || val > 255)
1260                 return -EINVAL;
1261
1262         ret = bq2415x_i2c_write(bq, reg, val);
1263         if (ret < 0)
1264                 return ret;
1265         return count;
1266 }
1267
1268 /* print value of chip register, format: 'register=value' */
1269 static ssize_t bq2415x_sysfs_print_reg(struct bq2415x_device *bq,
1270                                        u8 reg,
1271                                        char *buf)
1272 {
1273         int ret = bq2415x_i2c_read(bq, reg);
1274
1275         if (ret < 0)
1276                 return sprintf(buf, "%#.2x=error %d\n", reg, ret);
1277         return sprintf(buf, "%#.2x=%#.2x\n", reg, ret);
1278 }
1279
1280 /* show all raw values of chip register, format per line: 'register=value' */
1281 static ssize_t bq2415x_sysfs_show_registers(struct device *dev,
1282                                             struct device_attribute *attr,
1283                                             char *buf)
1284 {
1285         struct power_supply *psy = dev_get_drvdata(dev);
1286         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1287                                                  charger);
1288         ssize_t ret = 0;
1289
1290         ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_STATUS, buf+ret);
1291         ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CONTROL, buf+ret);
1292         ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VOLTAGE, buf+ret);
1293         ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VENDER, buf+ret);
1294         ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CURRENT, buf+ret);
1295         return ret;
1296 }
1297
1298 /* set current and voltage limit entries (in mA or mV) */
1299 static ssize_t bq2415x_sysfs_set_limit(struct device *dev,
1300                                        struct device_attribute *attr,
1301                                        const char *buf,
1302                                        size_t count)
1303 {
1304         struct power_supply *psy = dev_get_drvdata(dev);
1305         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1306                                                  charger);
1307         long val;
1308         int ret;
1309
1310         if (kstrtol(buf, 10, &val) < 0)
1311                 return -EINVAL;
1312
1313         if (strcmp(attr->attr.name, "current_limit") == 0)
1314                 ret = bq2415x_set_current_limit(bq, val);
1315         else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0)
1316                 ret = bq2415x_set_weak_battery_voltage(bq, val);
1317         else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0)
1318                 ret = bq2415x_set_battery_regulation_voltage(bq, val);
1319         else if (strcmp(attr->attr.name, "charge_current") == 0)
1320                 ret = bq2415x_set_charge_current(bq, val);
1321         else if (strcmp(attr->attr.name, "termination_current") == 0)
1322                 ret = bq2415x_set_termination_current(bq, val);
1323         else
1324                 return -EINVAL;
1325
1326         if (ret < 0)
1327                 return ret;
1328         return count;
1329 }
1330
1331 /* show current and voltage limit entries (in mA or mV) */
1332 static ssize_t bq2415x_sysfs_show_limit(struct device *dev,
1333                                         struct device_attribute *attr,
1334                                         char *buf)
1335 {
1336         struct power_supply *psy = dev_get_drvdata(dev);
1337         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1338                                                  charger);
1339         int ret;
1340
1341         if (strcmp(attr->attr.name, "current_limit") == 0)
1342                 ret = bq2415x_get_current_limit(bq);
1343         else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0)
1344                 ret = bq2415x_get_weak_battery_voltage(bq);
1345         else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0)
1346                 ret = bq2415x_get_battery_regulation_voltage(bq);
1347         else if (strcmp(attr->attr.name, "charge_current") == 0)
1348                 ret = bq2415x_get_charge_current(bq);
1349         else if (strcmp(attr->attr.name, "termination_current") == 0)
1350                 ret = bq2415x_get_termination_current(bq);
1351         else
1352                 return -EINVAL;
1353
1354         if (ret < 0)
1355                 return ret;
1356         return sprintf(buf, "%d\n", ret);
1357 }
1358
1359 /* set *_enable entries */
1360 static ssize_t bq2415x_sysfs_set_enable(struct device *dev,
1361                                         struct device_attribute *attr,
1362                                         const char *buf,
1363                                         size_t count)
1364 {
1365         struct power_supply *psy = dev_get_drvdata(dev);
1366         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1367                                                  charger);
1368         enum bq2415x_command command;
1369         long val;
1370         int ret;
1371
1372         if (kstrtol(buf, 10, &val) < 0)
1373                 return -EINVAL;
1374
1375         if (strcmp(attr->attr.name, "charge_termination_enable") == 0)
1376                 command = val ? BQ2415X_CHARGE_TERMINATION_ENABLE :
1377                         BQ2415X_CHARGE_TERMINATION_DISABLE;
1378         else if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
1379                 command = val ? BQ2415X_HIGH_IMPEDANCE_ENABLE :
1380                         BQ2415X_HIGH_IMPEDANCE_DISABLE;
1381         else if (strcmp(attr->attr.name, "otg_pin_enable") == 0)
1382                 command = val ? BQ2415X_OTG_PIN_ENABLE :
1383                         BQ2415X_OTG_PIN_DISABLE;
1384         else if (strcmp(attr->attr.name, "stat_pin_enable") == 0)
1385                 command = val ? BQ2415X_STAT_PIN_ENABLE :
1386                         BQ2415X_STAT_PIN_DISABLE;
1387         else
1388                 return -EINVAL;
1389
1390         ret = bq2415x_exec_command(bq, command);
1391         if (ret < 0)
1392                 return ret;
1393         return count;
1394 }
1395
1396 /* show *_enable entries */
1397 static ssize_t bq2415x_sysfs_show_enable(struct device *dev,
1398                                          struct device_attribute *attr,
1399                                          char *buf)
1400 {
1401         struct power_supply *psy = dev_get_drvdata(dev);
1402         struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1403                                                  charger);
1404         enum bq2415x_command command;
1405         int ret;
1406
1407         if (strcmp(attr->attr.name, "charge_termination_enable") == 0)
1408                 command = BQ2415X_CHARGE_TERMINATION_STATUS;
1409         else if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
1410                 command = BQ2415X_HIGH_IMPEDANCE_STATUS;
1411         else if (strcmp(attr->attr.name, "otg_pin_enable") == 0)
1412                 command = BQ2415X_OTG_PIN_STATUS;
1413         else if (strcmp(attr->attr.name, "stat_pin_enable") == 0)
1414                 command = BQ2415X_STAT_PIN_STATUS;
1415         else
1416                 return -EINVAL;
1417
1418         ret = bq2415x_exec_command(bq, command);
1419         if (ret < 0)
1420                 return ret;
1421         return sprintf(buf, "%d\n", ret);
1422 }
1423
1424 static DEVICE_ATTR(current_limit, S_IWUSR | S_IRUGO,
1425                 bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
1426 static DEVICE_ATTR(weak_battery_voltage, S_IWUSR | S_IRUGO,
1427                 bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
1428 static DEVICE_ATTR(battery_regulation_voltage, S_IWUSR | S_IRUGO,
1429                 bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
1430 static DEVICE_ATTR(charge_current, S_IWUSR | S_IRUGO,
1431                 bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
1432 static DEVICE_ATTR(termination_current, S_IWUSR | S_IRUGO,
1433                 bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
1434
1435 static DEVICE_ATTR(charge_termination_enable, S_IWUSR | S_IRUGO,
1436                 bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
1437 static DEVICE_ATTR(high_impedance_enable, S_IWUSR | S_IRUGO,
1438                 bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
1439 static DEVICE_ATTR(otg_pin_enable, S_IWUSR | S_IRUGO,
1440                 bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
1441 static DEVICE_ATTR(stat_pin_enable, S_IWUSR | S_IRUGO,
1442                 bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
1443
1444 static DEVICE_ATTR(reported_mode, S_IRUGO,
1445                 bq2415x_sysfs_show_reported_mode, NULL);
1446 static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO,
1447                 bq2415x_sysfs_show_mode, bq2415x_sysfs_set_mode);
1448 static DEVICE_ATTR(timer, S_IWUSR | S_IRUGO,
1449                 bq2415x_sysfs_show_timer, bq2415x_sysfs_set_timer);
1450
1451 static DEVICE_ATTR(registers, S_IWUSR | S_IRUGO,
1452                 bq2415x_sysfs_show_registers, bq2415x_sysfs_set_registers);
1453
1454 static DEVICE_ATTR(otg_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
1455 static DEVICE_ATTR(charge_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
1456 static DEVICE_ATTR(boost_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
1457 static DEVICE_ATTR(fault_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
1458
1459 static struct attribute *bq2415x_sysfs_attributes[] = {
1460         /*
1461          * TODO: some (appropriate) of these attrs should be switched to
1462          * use power supply class props.
1463          */
1464         &dev_attr_current_limit.attr,
1465         &dev_attr_weak_battery_voltage.attr,
1466         &dev_attr_battery_regulation_voltage.attr,
1467         &dev_attr_charge_current.attr,
1468         &dev_attr_termination_current.attr,
1469
1470         &dev_attr_charge_termination_enable.attr,
1471         &dev_attr_high_impedance_enable.attr,
1472         &dev_attr_otg_pin_enable.attr,
1473         &dev_attr_stat_pin_enable.attr,
1474
1475         &dev_attr_reported_mode.attr,
1476         &dev_attr_mode.attr,
1477         &dev_attr_timer.attr,
1478
1479         &dev_attr_registers.attr,
1480
1481         &dev_attr_otg_status.attr,
1482         &dev_attr_charge_status.attr,
1483         &dev_attr_boost_status.attr,
1484         &dev_attr_fault_status.attr,
1485         NULL,
1486 };
1487
1488 static const struct attribute_group bq2415x_sysfs_attr_group = {
1489         .attrs = bq2415x_sysfs_attributes,
1490 };
1491
1492 static int bq2415x_sysfs_init(struct bq2415x_device *bq)
1493 {
1494         return sysfs_create_group(&bq->charger.dev->kobj,
1495                         &bq2415x_sysfs_attr_group);
1496 }
1497
1498 static void bq2415x_sysfs_exit(struct bq2415x_device *bq)
1499 {
1500         sysfs_remove_group(&bq->charger.dev->kobj, &bq2415x_sysfs_attr_group);
1501 }
1502
1503 /* main bq2415x probe function */
1504 static int bq2415x_probe(struct i2c_client *client,
1505                          const struct i2c_device_id *id)
1506 {
1507         int ret;
1508         int num;
1509         char *name;
1510         struct bq2415x_device *bq;
1511
1512         if (!client->dev.platform_data) {
1513                 dev_err(&client->dev, "platform data not set\n");
1514                 return -ENODEV;
1515         }
1516
1517         /* Get new ID for the new device */
1518         mutex_lock(&bq2415x_id_mutex);
1519         num = idr_alloc(&bq2415x_id, client, 0, 0, GFP_KERNEL);
1520         mutex_unlock(&bq2415x_id_mutex);
1521         if (num < 0)
1522                 return num;
1523
1524         name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num);
1525         if (!name) {
1526                 dev_err(&client->dev, "failed to allocate device name\n");
1527                 ret = -ENOMEM;
1528                 goto error_1;
1529         }
1530
1531         bq = devm_kzalloc(&client->dev, sizeof(*bq), GFP_KERNEL);
1532         if (!bq) {
1533                 dev_err(&client->dev, "failed to allocate device data\n");
1534                 ret = -ENOMEM;
1535                 goto error_2;
1536         }
1537
1538         i2c_set_clientdata(client, bq);
1539
1540         bq->id = num;
1541         bq->dev = &client->dev;
1542         bq->chip = id->driver_data;
1543         bq->name = name;
1544         bq->mode = BQ2415X_MODE_OFF;
1545         bq->reported_mode = BQ2415X_MODE_OFF;
1546         bq->autotimer = 0;
1547         bq->automode = 0;
1548
1549         memcpy(&bq->init_data, client->dev.platform_data,
1550                         sizeof(bq->init_data));
1551
1552         bq2415x_reset_chip(bq);
1553
1554         ret = bq2415x_power_supply_init(bq);
1555         if (ret) {
1556                 dev_err(bq->dev, "failed to register power supply: %d\n", ret);
1557                 goto error_2;
1558         }
1559
1560         ret = bq2415x_sysfs_init(bq);
1561         if (ret) {
1562                 dev_err(bq->dev, "failed to create sysfs entries: %d\n", ret);
1563                 goto error_3;
1564         }
1565
1566         ret = bq2415x_set_defaults(bq);
1567         if (ret) {
1568                 dev_err(bq->dev, "failed to set default values: %d\n", ret);
1569                 goto error_4;
1570         }
1571
1572         if (bq->init_data.set_mode_hook) {
1573                 if (bq->init_data.set_mode_hook(
1574                                 bq2415x_hook_function, bq)) {
1575                         bq->automode = 1;
1576                         bq2415x_set_mode(bq, bq->reported_mode);
1577                         dev_info(bq->dev, "automode enabled\n");
1578                 } else {
1579                         bq->automode = -1;
1580                         dev_info(bq->dev, "automode failed\n");
1581                 }
1582         } else {
1583                 bq->automode = -1;
1584                 dev_info(bq->dev, "automode not supported\n");
1585         }
1586
1587         INIT_DELAYED_WORK(&bq->work, bq2415x_timer_work);
1588         bq2415x_set_autotimer(bq, 1);
1589
1590         dev_info(bq->dev, "driver registered\n");
1591         return 0;
1592
1593 error_4:
1594         bq2415x_sysfs_exit(bq);
1595 error_3:
1596         bq2415x_power_supply_exit(bq);
1597 error_2:
1598         kfree(name);
1599 error_1:
1600         mutex_lock(&bq2415x_id_mutex);
1601         idr_remove(&bq2415x_id, num);
1602         mutex_unlock(&bq2415x_id_mutex);
1603
1604         return ret;
1605 }
1606
1607 /* main bq2415x remove function */
1608
1609 static int bq2415x_remove(struct i2c_client *client)
1610 {
1611         struct bq2415x_device *bq = i2c_get_clientdata(client);
1612
1613         if (bq->init_data.set_mode_hook)
1614                 bq->init_data.set_mode_hook(NULL, NULL);
1615
1616         bq2415x_sysfs_exit(bq);
1617         bq2415x_power_supply_exit(bq);
1618
1619         bq2415x_reset_chip(bq);
1620
1621         mutex_lock(&bq2415x_id_mutex);
1622         idr_remove(&bq2415x_id, bq->id);
1623         mutex_unlock(&bq2415x_id_mutex);
1624
1625         dev_info(bq->dev, "driver unregistered\n");
1626
1627         kfree(bq->name);
1628
1629         return 0;
1630 }
1631
1632 static const struct i2c_device_id bq2415x_i2c_id_table[] = {
1633         { "bq2415x", BQUNKNOWN },
1634         { "bq24150", BQ24150 },
1635         { "bq24150a", BQ24150A },
1636         { "bq24151", BQ24151 },
1637         { "bq24151a", BQ24151A },
1638         { "bq24152", BQ24152 },
1639         { "bq24153", BQ24153 },
1640         { "bq24153a", BQ24153A },
1641         { "bq24155", BQ24155 },
1642         { "bq24156", BQ24156 },
1643         { "bq24156a", BQ24156A },
1644         { "bq24158", BQ24158 },
1645         {},
1646 };
1647 MODULE_DEVICE_TABLE(i2c, bq2415x_i2c_id_table);
1648
1649 static struct i2c_driver bq2415x_driver = {
1650         .driver = {
1651                 .name = "bq2415x-charger",
1652         },
1653         .probe = bq2415x_probe,
1654         .remove = bq2415x_remove,
1655         .id_table = bq2415x_i2c_id_table,
1656 };
1657 module_i2c_driver(bq2415x_driver);
1658
1659 MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
1660 MODULE_DESCRIPTION("bq2415x charger driver");
1661 MODULE_LICENSE("GPL");