Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[platform/adaptation/renesas_rcar/renesas_kernel.git] / drivers / power / 88pm860x_charger.c
1 /*
2  * Battery driver for Marvell 88PM860x PMIC
3  *
4  * Copyright (c) 2012 Marvell International Ltd.
5  * Author:      Jett Zhou <jtzhou@marvell.com>
6  *              Haojian Zhuang <haojian.zhuang@marvell.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/platform_device.h>
16 #include <linux/slab.h>
17 #include <linux/power_supply.h>
18 #include <linux/mfd/88pm860x.h>
19 #include <linux/delay.h>
20 #include <linux/uaccess.h>
21 #include <asm/div64.h>
22
23 /* bit definitions of Status Query Interface 2 */
24 #define STATUS2_CHG             (1 << 2)
25
26 /* bit definitions of Reset Out Register */
27 #define RESET_SW_PD             (1 << 7)
28
29 /* bit definitions of PreReg 1 */
30 #define PREREG1_90MA            (0x0)
31 #define PREREG1_180MA           (0x1)
32 #define PREREG1_450MA           (0x4)
33 #define PREREG1_540MA           (0x5)
34 #define PREREG1_1350MA          (0xE)
35 #define PREREG1_VSYS_4_5V       (3 << 4)
36
37 /* bit definitions of Charger Control 1 Register */
38 #define CC1_MODE_OFF            (0)
39 #define CC1_MODE_PRECHARGE      (1)
40 #define CC1_MODE_FASTCHARGE     (2)
41 #define CC1_MODE_PULSECHARGE    (3)
42 #define CC1_ITERM_20MA          (0 << 2)
43 #define CC1_ITERM_60MA          (2 << 2)
44 #define CC1_VFCHG_4_2V          (9 << 4)
45
46 /* bit definitions of Charger Control 2 Register */
47 #define CC2_ICHG_100MA          (0x1)
48 #define CC2_ICHG_500MA          (0x9)
49 #define CC2_ICHG_1000MA         (0x13)
50
51 /* bit definitions of Charger Control 3 Register */
52 #define CC3_180MIN_TIMEOUT      (0x6 << 4)
53 #define CC3_270MIN_TIMEOUT      (0x7 << 4)
54 #define CC3_360MIN_TIMEOUT      (0xA << 4)
55 #define CC3_DISABLE_TIMEOUT     (0xF << 4)
56
57 /* bit definitions of Charger Control 4 Register */
58 #define CC4_IPRE_40MA           (7)
59 #define CC4_VPCHG_3_2V          (3 << 4)
60 #define CC4_IFCHG_MON_EN        (1 << 6)
61 #define CC4_BTEMP_MON_EN        (1 << 7)
62
63 /* bit definitions of Charger Control 6 Register */
64 #define CC6_BAT_OV_EN           (1 << 2)
65 #define CC6_BAT_UV_EN           (1 << 3)
66 #define CC6_UV_VBAT_SET         (0x3 << 6)      /* 2.8v */
67
68 /* bit definitions of Charger Control 7 Register */
69 #define CC7_BAT_REM_EN          (1 << 3)
70 #define CC7_IFSM_EN             (1 << 7)
71
72 /* bit definitions of Measurement Enable 1 Register */
73 #define MEAS1_VBAT              (1 << 0)
74
75 /* bit definitions of Measurement Enable 3 Register */
76 #define MEAS3_IBAT_EN           (1 << 0)
77 #define MEAS3_CC_EN             (1 << 2)
78
79 #define FSM_INIT                0
80 #define FSM_DISCHARGE           1
81 #define FSM_PRECHARGE           2
82 #define FSM_FASTCHARGE          3
83
84 #define PRECHARGE_THRESHOLD     3100
85 #define POWEROFF_THRESHOLD      3400
86 #define CHARGE_THRESHOLD        4000
87 #define DISCHARGE_THRESHOLD     4180
88
89 /* over-temperature on PM8606 setting */
90 #define OVER_TEMP_FLAG          (1 << 6)
91 #define OVTEMP_AUTORECOVER      (1 << 3)
92
93 /* over-voltage protect on vchg setting mv */
94 #define VCHG_NORMAL_LOW         4200
95 #define VCHG_NORMAL_CHECK       5800
96 #define VCHG_NORMAL_HIGH        6000
97 #define VCHG_OVP_LOW            5500
98
99 struct pm860x_charger_info {
100         struct pm860x_chip *chip;
101         struct i2c_client *i2c;
102         struct i2c_client *i2c_8606;
103         struct device *dev;
104
105         struct power_supply usb;
106         struct mutex lock;
107         int irq_nums;
108         int irq[7];
109         unsigned state:3;       /* fsm state */
110         unsigned online:1;      /* usb charger */
111         unsigned present:1;     /* battery present */
112         unsigned allowed:1;
113 };
114
115 static char *pm860x_supplied_to[] = {
116         "battery-monitor",
117 };
118
119 static int measure_vchg(struct pm860x_charger_info *info, int *data)
120 {
121         unsigned char buf[2];
122         int ret = 0;
123
124         ret = pm860x_bulk_read(info->i2c, PM8607_VCHG_MEAS1, 2, buf);
125         if (ret < 0)
126                 return ret;
127
128         *data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f);
129         /* V_BATT_MEAS(mV) = value * 5 * 1.8 * 1000 / (2^12) */
130         *data = ((*data & 0xfff) * 9 * 125) >> 9;
131
132         dev_dbg(info->dev, "%s, vchg: %d mv\n", __func__, *data);
133
134         return ret;
135 }
136
137 static void set_vchg_threshold(struct pm860x_charger_info *info,
138                                int min, int max)
139 {
140         int data;
141
142         /* (tmp << 8) * / 5 / 1800 */
143         if (min <= 0)
144                 data = 0;
145         else
146                 data = (min << 5) / 1125;
147         pm860x_reg_write(info->i2c, PM8607_VCHG_LOWTH, data);
148         dev_dbg(info->dev, "VCHG_LOWTH:%dmv, 0x%x\n", min, data);
149
150         if (max <= 0)
151                 data = 0xff;
152         else
153                 data = (max << 5) / 1125;
154         pm860x_reg_write(info->i2c, PM8607_VCHG_HIGHTH, data);
155         dev_dbg(info->dev, "VCHG_HIGHTH:%dmv, 0x%x\n", max, data);
156
157 }
158
159 static void set_vbatt_threshold(struct pm860x_charger_info *info,
160                                 int min, int max)
161 {
162         int data;
163
164         /* (tmp << 8) * 3 / 1800 */
165         if (min <= 0)
166                 data = 0;
167         else
168                 data = (min << 5) / 675;
169         pm860x_reg_write(info->i2c, PM8607_VBAT_LOWTH, data);
170         dev_dbg(info->dev, "VBAT Min:%dmv, LOWTH:0x%x\n", min, data);
171
172         if (max <= 0)
173                 data = 0xff;
174         else
175                 data = (max << 5) / 675;
176         pm860x_reg_write(info->i2c, PM8607_VBAT_HIGHTH, data);
177         dev_dbg(info->dev, "VBAT Max:%dmv, HIGHTH:0x%x\n", max, data);
178
179         return;
180 }
181
182 static int start_precharge(struct pm860x_charger_info *info)
183 {
184         int ret;
185
186         dev_dbg(info->dev, "Start Pre-charging!\n");
187         set_vbatt_threshold(info, 0, 0);
188
189         ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
190                                PREREG1_1350MA | PREREG1_VSYS_4_5V);
191         if (ret < 0)
192                 goto out;
193         /* stop charging */
194         ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
195                               CC1_MODE_OFF);
196         if (ret < 0)
197                 goto out;
198         /* set 270 minutes timeout */
199         ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
200                               CC3_270MIN_TIMEOUT);
201         if (ret < 0)
202                 goto out;
203         /* set precharge current, termination voltage, IBAT & TBAT monitor */
204         ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL4,
205                                CC4_IPRE_40MA | CC4_VPCHG_3_2V |
206                                CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
207         if (ret < 0)
208                 goto out;
209         ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
210                               CC7_BAT_REM_EN | CC7_IFSM_EN,
211                               CC7_BAT_REM_EN | CC7_IFSM_EN);
212         if (ret < 0)
213                 goto out;
214         /* trigger precharge */
215         ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
216                               CC1_MODE_PRECHARGE);
217 out:
218         return ret;
219 }
220
221 static int start_fastcharge(struct pm860x_charger_info *info)
222 {
223         int ret;
224
225         dev_dbg(info->dev, "Start Fast-charging!\n");
226
227         /* set fastcharge termination current & voltage, disable charging */
228         ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL1,
229                                CC1_MODE_OFF | CC1_ITERM_60MA |
230                                CC1_VFCHG_4_2V);
231         if (ret < 0)
232                 goto out;
233         ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
234                                PREREG1_540MA | PREREG1_VSYS_4_5V);
235         if (ret < 0)
236                 goto out;
237         ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f,
238                               CC2_ICHG_500MA);
239         if (ret < 0)
240                 goto out;
241         /* set 270 minutes timeout */
242         ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
243                               CC3_270MIN_TIMEOUT);
244         if (ret < 0)
245                 goto out;
246         /* set IBAT & TBAT monitor */
247         ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL4,
248                               CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN,
249                               CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
250         if (ret < 0)
251                 goto out;
252         ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6,
253                               CC6_BAT_OV_EN | CC6_BAT_UV_EN |
254                               CC6_UV_VBAT_SET,
255                               CC6_BAT_OV_EN | CC6_BAT_UV_EN |
256                               CC6_UV_VBAT_SET);
257         if (ret < 0)
258                 goto out;
259         ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
260                               CC7_BAT_REM_EN | CC7_IFSM_EN,
261                               CC7_BAT_REM_EN | CC7_IFSM_EN);
262         if (ret < 0)
263                 goto out;
264         /* launch fast-charge */
265         ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
266                               CC1_MODE_FASTCHARGE);
267         /* vchg threshold setting */
268         set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_NORMAL_HIGH);
269 out:
270         return ret;
271 }
272
273 static void stop_charge(struct pm860x_charger_info *info, int vbatt)
274 {
275         dev_dbg(info->dev, "Stop charging!\n");
276         pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, CC1_MODE_OFF);
277         if (vbatt > CHARGE_THRESHOLD && info->online)
278                 set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
279 }
280
281 static void power_off_notification(struct pm860x_charger_info *info)
282 {
283         dev_dbg(info->dev, "Power-off notification!\n");
284 }
285
286 static int set_charging_fsm(struct pm860x_charger_info *info)
287 {
288         struct power_supply *psy;
289         union power_supply_propval data;
290         unsigned char fsm_state[][16] = { "init", "discharge", "precharge",
291                 "fastcharge",
292         };
293         int ret;
294         int vbatt;
295
296         psy = power_supply_get_by_name(pm860x_supplied_to[0]);
297         if (!psy)
298                 return -EINVAL;
299         ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &data);
300         if (ret)
301                 return ret;
302         vbatt = data.intval / 1000;
303
304         ret = psy->get_property(psy, POWER_SUPPLY_PROP_PRESENT, &data);
305         if (ret)
306                 return ret;
307
308         mutex_lock(&info->lock);
309         info->present = data.intval;
310
311         dev_dbg(info->dev, "Entering FSM:%s, Charger:%s, Battery:%s, "
312                 "Allowed:%d\n",
313                 &fsm_state[info->state][0],
314                 (info->online) ? "online" : "N/A",
315                 (info->present) ? "present" : "N/A", info->allowed);
316         dev_dbg(info->dev, "set_charging_fsm:vbatt:%d(mV)\n", vbatt);
317
318         switch (info->state) {
319         case FSM_INIT:
320                 if (info->online && info->present && info->allowed) {
321                         if (vbatt < PRECHARGE_THRESHOLD) {
322                                 info->state = FSM_PRECHARGE;
323                                 start_precharge(info);
324                         } else if (vbatt > DISCHARGE_THRESHOLD) {
325                                 info->state = FSM_DISCHARGE;
326                                 stop_charge(info, vbatt);
327                         } else if (vbatt < DISCHARGE_THRESHOLD) {
328                                 info->state = FSM_FASTCHARGE;
329                                 start_fastcharge(info);
330                         }
331                 } else {
332                         if (vbatt < POWEROFF_THRESHOLD) {
333                                 power_off_notification(info);
334                         } else {
335                                 info->state = FSM_DISCHARGE;
336                                 stop_charge(info, vbatt);
337                         }
338                 }
339                 break;
340         case FSM_PRECHARGE:
341                 if (info->online && info->present && info->allowed) {
342                         if (vbatt > PRECHARGE_THRESHOLD) {
343                                 info->state = FSM_FASTCHARGE;
344                                 start_fastcharge(info);
345                         }
346                 } else {
347                         info->state = FSM_DISCHARGE;
348                         stop_charge(info, vbatt);
349                 }
350                 break;
351         case FSM_FASTCHARGE:
352                 if (info->online && info->present && info->allowed) {
353                         if (vbatt < PRECHARGE_THRESHOLD) {
354                                 info->state = FSM_PRECHARGE;
355                                 start_precharge(info);
356                         }
357                 } else {
358                         info->state = FSM_DISCHARGE;
359                         stop_charge(info, vbatt);
360                 }
361                 break;
362         case FSM_DISCHARGE:
363                 if (info->online && info->present && info->allowed) {
364                         if (vbatt < PRECHARGE_THRESHOLD) {
365                                 info->state = FSM_PRECHARGE;
366                                 start_precharge(info);
367                         } else if (vbatt < DISCHARGE_THRESHOLD) {
368                                 info->state = FSM_FASTCHARGE;
369                                 start_fastcharge(info);
370                         }
371                 } else {
372                         if (vbatt < POWEROFF_THRESHOLD)
373                                 power_off_notification(info);
374                         else if (vbatt > CHARGE_THRESHOLD && info->online)
375                                 set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
376                 }
377                 break;
378         default:
379                 dev_warn(info->dev, "FSM meets wrong state:%d\n",
380                          info->state);
381                 break;
382         }
383         dev_dbg(info->dev,
384                 "Out FSM:%s, Charger:%s, Battery:%s, Allowed:%d\n",
385                 &fsm_state[info->state][0],
386                 (info->online) ? "online" : "N/A",
387                 (info->present) ? "present" : "N/A", info->allowed);
388         mutex_unlock(&info->lock);
389
390         return 0;
391 }
392
393 static irqreturn_t pm860x_charger_handler(int irq, void *data)
394 {
395         struct pm860x_charger_info *info = data;
396         int ret;
397
398         mutex_lock(&info->lock);
399         ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
400         if (ret < 0) {
401                 mutex_unlock(&info->lock);
402                 goto out;
403         }
404         if (ret & STATUS2_CHG) {
405                 info->online = 1;
406                 info->allowed = 1;
407         } else {
408                 info->online = 0;
409                 info->allowed = 0;
410         }
411         mutex_unlock(&info->lock);
412         dev_dbg(info->dev, "%s, Charger:%s, Allowed:%d\n", __func__,
413                 (info->online) ? "online" : "N/A", info->allowed);
414
415         set_charging_fsm(info);
416
417         power_supply_changed(&info->usb);
418 out:
419         return IRQ_HANDLED;
420 }
421
422 static irqreturn_t pm860x_temp_handler(int irq, void *data)
423 {
424         struct power_supply *psy;
425         struct pm860x_charger_info *info = data;
426         union power_supply_propval temp;
427         int value;
428         int ret;
429
430         psy = power_supply_get_by_name(pm860x_supplied_to[0]);
431         if (!psy)
432                 goto out;
433         ret = psy->get_property(psy, POWER_SUPPLY_PROP_TEMP, &temp);
434         if (ret)
435                 goto out;
436         value = temp.intval / 10;
437
438         mutex_lock(&info->lock);
439         /* Temperature < -10 C or >40 C, Will not allow charge */
440         if (value < -10 || value > 40)
441                 info->allowed = 0;
442         else
443                 info->allowed = 1;
444         dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
445         mutex_unlock(&info->lock);
446
447         set_charging_fsm(info);
448 out:
449         return IRQ_HANDLED;
450 }
451
452 static irqreturn_t pm860x_exception_handler(int irq, void *data)
453 {
454         struct pm860x_charger_info *info = data;
455
456         mutex_lock(&info->lock);
457         info->allowed = 0;
458         mutex_unlock(&info->lock);
459         dev_dbg(info->dev, "%s, irq: %d\n", __func__, irq);
460
461         set_charging_fsm(info);
462         return IRQ_HANDLED;
463 }
464
465 static irqreturn_t pm860x_done_handler(int irq, void *data)
466 {
467         struct pm860x_charger_info *info = data;
468         struct power_supply *psy;
469         union power_supply_propval val;
470         int ret;
471         int vbatt;
472
473         mutex_lock(&info->lock);
474         /* pre-charge done, will transimit to fast-charge stage */
475         if (info->state == FSM_PRECHARGE) {
476                 info->allowed = 1;
477                 goto out;
478         }
479         /*
480          * Fast charge done, delay to read
481          * the correct status of CHG_DET.
482          */
483         mdelay(5);
484         info->allowed = 0;
485         psy = power_supply_get_by_name(pm860x_supplied_to[0]);
486         if (!psy)
487                 goto out;
488         ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &val);
489         if (ret)
490                 goto out;
491         vbatt = val.intval / 1000;
492         /*
493          * CHG_DONE interrupt is faster than CHG_DET interrupt when
494          * plug in/out usb, So we can not rely on info->online, we
495          * need check pm8607 status register to check usb is online
496          * or not, then we can decide it is real charge done
497          * automatically or it is triggered by usb plug out;
498          */
499         ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
500         if (ret < 0)
501                 goto out;
502         if (vbatt > CHARGE_THRESHOLD && ret & STATUS2_CHG)
503                 psy->set_property(psy, POWER_SUPPLY_PROP_CHARGE_FULL, &val);
504
505 out:
506         mutex_unlock(&info->lock);
507         dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
508         set_charging_fsm(info);
509
510         return IRQ_HANDLED;
511 }
512
513 static irqreturn_t pm860x_vbattery_handler(int irq, void *data)
514 {
515         struct pm860x_charger_info *info = data;
516
517         mutex_lock(&info->lock);
518
519         set_vbatt_threshold(info, 0, 0);
520
521         if (info->present && info->online)
522                 info->allowed = 1;
523         else
524                 info->allowed = 0;
525         mutex_unlock(&info->lock);
526         dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
527
528         set_charging_fsm(info);
529
530         return IRQ_HANDLED;
531 }
532
533 static irqreturn_t pm860x_vchg_handler(int irq, void *data)
534 {
535         struct pm860x_charger_info *info = data;
536         int vchg = 0;
537
538         if (info->present)
539                 goto out;
540
541         measure_vchg(info, &vchg);
542
543         mutex_lock(&info->lock);
544         if (!info->online) {
545                 int status;
546                 /* check if over-temp on pm8606 or not */
547                 status = pm860x_reg_read(info->i2c_8606, PM8606_FLAGS);
548                 if (status & OVER_TEMP_FLAG) {
549                         /* clear over temp flag and set auto recover */
550                         pm860x_set_bits(info->i2c_8606, PM8606_FLAGS,
551                                         OVER_TEMP_FLAG, OVER_TEMP_FLAG);
552                         pm860x_set_bits(info->i2c_8606,
553                                         PM8606_VSYS,
554                                         OVTEMP_AUTORECOVER,
555                                         OVTEMP_AUTORECOVER);
556                         dev_dbg(info->dev,
557                                 "%s, pm8606 over-temp occurred\n", __func__);
558                 }
559         }
560
561         if (vchg > VCHG_NORMAL_CHECK) {
562                 set_vchg_threshold(info, VCHG_OVP_LOW, 0);
563                 info->allowed = 0;
564                 dev_dbg(info->dev,
565                         "%s,pm8607 over-vchg occurred,vchg = %dmv\n",
566                         __func__, vchg);
567         } else if (vchg < VCHG_OVP_LOW) {
568                 set_vchg_threshold(info, VCHG_NORMAL_LOW,
569                                    VCHG_NORMAL_HIGH);
570                 info->allowed = 1;
571                 dev_dbg(info->dev,
572                         "%s,pm8607 over-vchg recover,vchg = %dmv\n",
573                         __func__, vchg);
574         }
575         mutex_unlock(&info->lock);
576
577         dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
578         set_charging_fsm(info);
579 out:
580         return IRQ_HANDLED;
581 }
582
583 static int pm860x_usb_get_prop(struct power_supply *psy,
584                                enum power_supply_property psp,
585                                union power_supply_propval *val)
586 {
587         struct pm860x_charger_info *info =
588             dev_get_drvdata(psy->dev->parent);
589
590         switch (psp) {
591         case POWER_SUPPLY_PROP_STATUS:
592                 if (info->state == FSM_FASTCHARGE ||
593                                 info->state == FSM_PRECHARGE)
594                         val->intval = POWER_SUPPLY_STATUS_CHARGING;
595                 else
596                         val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
597                 break;
598         case POWER_SUPPLY_PROP_ONLINE:
599                 val->intval = info->online;
600                 break;
601         default:
602                 return -ENODEV;
603         }
604         return 0;
605 }
606
607 static enum power_supply_property pm860x_usb_props[] = {
608         POWER_SUPPLY_PROP_STATUS,
609         POWER_SUPPLY_PROP_ONLINE,
610 };
611
612 static int pm860x_init_charger(struct pm860x_charger_info *info)
613 {
614         int ret;
615
616         ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
617         if (ret < 0)
618                 return ret;
619
620         mutex_lock(&info->lock);
621         info->state = FSM_INIT;
622         if (ret & STATUS2_CHG) {
623                 info->online = 1;
624                 info->allowed = 1;
625         } else {
626                 info->online = 0;
627                 info->allowed = 0;
628         }
629         mutex_unlock(&info->lock);
630
631         set_charging_fsm(info);
632         return 0;
633 }
634
635 static struct pm860x_irq_desc {
636         const char *name;
637         irqreturn_t (*handler)(int irq, void *data);
638 } pm860x_irq_descs[] = {
639         { "usb supply detect", pm860x_charger_handler },
640         { "charge done", pm860x_done_handler },
641         { "charge timeout", pm860x_exception_handler },
642         { "charge fault", pm860x_exception_handler },
643         { "temperature", pm860x_temp_handler },
644         { "vbatt", pm860x_vbattery_handler },
645         { "vchg", pm860x_vchg_handler },
646 };
647
648 static int pm860x_charger_probe(struct platform_device *pdev)
649 {
650         struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
651         struct pm860x_charger_info *info;
652         int ret;
653         int count;
654         int i;
655         int j;
656
657         info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
658         if (!info)
659                 return -ENOMEM;
660
661         count = pdev->num_resources;
662         for (i = 0, j = 0; i < count; i++) {
663                 info->irq[j] = platform_get_irq(pdev, i);
664                 if (info->irq[j] < 0)
665                         continue;
666                 j++;
667         }
668         info->irq_nums = j;
669
670         info->chip = chip;
671         info->i2c =
672             (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
673         info->i2c_8606 =
674             (chip->id == CHIP_PM8607) ? chip->companion : chip->client;
675         if (!info->i2c_8606) {
676                 dev_err(&pdev->dev, "Missed I2C address of 88PM8606!\n");
677                 ret = -EINVAL;
678                 goto out;
679         }
680         info->dev = &pdev->dev;
681
682         /* set init value for the case we are not using battery */
683         set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_OVP_LOW);
684
685         mutex_init(&info->lock);
686         platform_set_drvdata(pdev, info);
687
688         info->usb.name = "usb";
689         info->usb.type = POWER_SUPPLY_TYPE_USB;
690         info->usb.supplied_to = pm860x_supplied_to;
691         info->usb.num_supplicants = ARRAY_SIZE(pm860x_supplied_to);
692         info->usb.properties = pm860x_usb_props;
693         info->usb.num_properties = ARRAY_SIZE(pm860x_usb_props);
694         info->usb.get_property = pm860x_usb_get_prop;
695         ret = power_supply_register(&pdev->dev, &info->usb);
696         if (ret)
697                 goto out;
698
699         pm860x_init_charger(info);
700
701         for (i = 0; i < ARRAY_SIZE(info->irq); i++) {
702                 ret = request_threaded_irq(info->irq[i], NULL,
703                         pm860x_irq_descs[i].handler,
704                         IRQF_ONESHOT, pm860x_irq_descs[i].name, info);
705                 if (ret < 0) {
706                         dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
707                                 info->irq[i], ret);
708                         goto out_irq;
709                 }
710         }
711         return 0;
712
713 out_irq:
714         while (--i >= 0)
715                 free_irq(info->irq[i], info);
716 out:
717         return ret;
718 }
719
720 static int pm860x_charger_remove(struct platform_device *pdev)
721 {
722         struct pm860x_charger_info *info = platform_get_drvdata(pdev);
723         int i;
724
725         power_supply_unregister(&info->usb);
726         free_irq(info->irq[0], info);
727         for (i = 0; i < info->irq_nums; i++)
728                 free_irq(info->irq[i], info);
729         return 0;
730 }
731
732 static struct platform_driver pm860x_charger_driver = {
733         .driver = {
734                    .name = "88pm860x-charger",
735                    .owner = THIS_MODULE,
736         },
737         .probe = pm860x_charger_probe,
738         .remove = pm860x_charger_remove,
739 };
740 module_platform_driver(pm860x_charger_driver);
741
742 MODULE_DESCRIPTION("Marvell 88PM860x Charger driver");
743 MODULE_LICENSE("GPL");