drivers/pinctrl/pinctrl-u300.c

   1 /*
   2  * Driver for the U300 pin controller
   3  *
   4  * Based on the original U300 padmux functions
   5  * Copyright (C) 2009-2011 ST-Ericsson AB
   6  * Author: Martin Persson <martin.persson@stericsson.com>
   7  * Author: Linus Walleij <linus.walleij@linaro.org>
   8  *
   9  * The DB3350 design and control registers are oriented around pads rather than
  10  * pins, so we enumerate the pads we can mux rather than actual pins. The pads
  11  * are connected to different pins in different packaging types, so it would
  12  * be confusing.
  13  */
  14 #include <linux/init.h>
  15 #include <linux/module.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/io.h>
  18 #include <linux/slab.h>
  19 #include <linux/err.h>
  20 #include <linux/pinctrl/pinctrl.h>
  21 #include <linux/pinctrl/pinmux.h>
  22 #include <linux/pinctrl/pinconf.h>
  23 #include <linux/pinctrl/pinconf-generic.h>
  24 #include "pinctrl-coh901.h"
  25
  26 /*
  27  * Register definitions for the U300 Padmux control registers in the
  28  * system controller
  29  */
  30
  31 /* PAD MUX Control register 1 (LOW) 16bit (R/W) */
  32 #define U300_SYSCON_PMC1LR                                      0x007C
  33 #define U300_SYSCON_PMC1LR_MASK                                 0xFFFF
  34 #define U300_SYSCON_PMC1LR_CDI_MASK                             0xC000
  35 #define U300_SYSCON_PMC1LR_CDI_CDI                              0x0000
  36 #define U300_SYSCON_PMC1LR_CDI_EMIF                             0x4000
  37 /* For BS335 */
  38 #define U300_SYSCON_PMC1LR_CDI_CDI2                             0x8000
  39 #define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO                   0xC000
  40 /* For BS365 */
  41 #define U300_SYSCON_PMC1LR_CDI_GPIO                             0x8000
  42 #define U300_SYSCON_PMC1LR_CDI_WCDMA                            0xC000
  43 /* Common defs */
  44 #define U300_SYSCON_PMC1LR_PDI_MASK                             0x3000
  45 #define U300_SYSCON_PMC1LR_PDI_PDI                              0x0000
  46 #define U300_SYSCON_PMC1LR_PDI_EGG                              0x1000
  47 #define U300_SYSCON_PMC1LR_PDI_WCDMA                            0x3000
  48 #define U300_SYSCON_PMC1LR_MMCSD_MASK                           0x0C00
  49 #define U300_SYSCON_PMC1LR_MMCSD_MMCSD                          0x0000
  50 #define U300_SYSCON_PMC1LR_MMCSD_MSPRO                          0x0400
  51 #define U300_SYSCON_PMC1LR_MMCSD_DSP                            0x0800
  52 #define U300_SYSCON_PMC1LR_MMCSD_WCDMA                          0x0C00
  53 #define U300_SYSCON_PMC1LR_ETM_MASK                             0x0300
  54 #define U300_SYSCON_PMC1LR_ETM_ACC                              0x0000
  55 #define U300_SYSCON_PMC1LR_ETM_APP                              0x0100
  56 #define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK                      0x00C0
  57 #define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC                    0x0000
  58 #define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF                      0x0040
  59 #define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM                     0x0080
  60 #define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB                0x00C0
  61 #define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK                      0x0030
  62 #define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC                    0x0000
  63 #define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF                      0x0010
  64 #define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM                     0x0020
  65 #define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI                      0x0030
  66 #define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK                      0x000C
  67 #define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC                    0x0000
  68 #define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF                      0x0004
  69 #define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM                     0x0008
  70 #define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI                      0x000C
  71 #define U300_SYSCON_PMC1LR_EMIF_1_MASK                          0x0003
  72 #define U300_SYSCON_PMC1LR_EMIF_1_STATIC                        0x0000
  73 #define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0                        0x0001
  74 #define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1                        0x0002
  75 #define U300_SYSCON_PMC1LR_EMIF_1                               0x0003
  76 /* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
  77 #define U300_SYSCON_PMC1HR                                      0x007E
  78 #define U300_SYSCON_PMC1HR_MASK                                 0xFFFF
  79 #define U300_SYSCON_PMC1HR_MISC_2_MASK                          0xC000
  80 #define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO                      0x0000
  81 #define U300_SYSCON_PMC1HR_MISC_2_MSPRO                         0x4000
  82 #define U300_SYSCON_PMC1HR_MISC_2_DSP                           0x8000
  83 #define U300_SYSCON_PMC1HR_MISC_2_AAIF                          0xC000
  84 #define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK                      0x3000
  85 #define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO                  0x0000
  86 #define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF                      0x1000
  87 #define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP                       0x2000
  88 #define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF                      0x3000
  89 #define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK                      0x0C00
  90 #define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO                  0x0000
  91 #define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC                       0x0400
  92 #define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP                       0x0800
  93 #define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF                      0x0C00
  94 #define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK                    0x0300
  95 #define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO                0x0000
  96 #define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI                     0x0100
  97 #define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF                    0x0300
  98 #define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK                    0x00C0
  99 #define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO                0x0000
 100 #define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI                     0x0040
 101 #define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF                    0x00C0
 102 #define U300_SYSCON_PMC1HR_APP_SPI_2_MASK                       0x0030
 103 #define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO                   0x0000
 104 #define U300_SYSCON_PMC1HR_APP_SPI_2_SPI                        0x0010
 105 #define U300_SYSCON_PMC1HR_APP_SPI_2_DSP                        0x0020
 106 #define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF                       0x0030
 107 #define U300_SYSCON_PMC1HR_APP_UART0_2_MASK                     0x000C
 108 #define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO                 0x0000
 109 #define U300_SYSCON_PMC1HR_APP_UART0_2_UART0                    0x0004
 110 #define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS                  0x0008
 111 #define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF                     0x000C
 112 #define U300_SYSCON_PMC1HR_APP_UART0_1_MASK                     0x0003
 113 #define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO                 0x0000
 114 #define U300_SYSCON_PMC1HR_APP_UART0_1_UART0                    0x0001
 115 #define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF                     0x0003
 116 /* Padmux 2 control */
 117 #define U300_SYSCON_PMC2R                                       0x100
 118 #define U300_SYSCON_PMC2R_APP_MISC_0_MASK                       0x00C0
 119 #define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO                   0x0000
 120 #define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM                 0x0040
 121 #define U300_SYSCON_PMC2R_APP_MISC_0_MMC                        0x0080
 122 #define U300_SYSCON_PMC2R_APP_MISC_0_CDI2                       0x00C0
 123 #define U300_SYSCON_PMC2R_APP_MISC_1_MASK                       0x0300
 124 #define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO                   0x0000
 125 #define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM                 0x0100
 126 #define U300_SYSCON_PMC2R_APP_MISC_1_MMC                        0x0200
 127 #define U300_SYSCON_PMC2R_APP_MISC_1_CDI2                       0x0300
 128 #define U300_SYSCON_PMC2R_APP_MISC_2_MASK                       0x0C00
 129 #define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO                   0x0000
 130 #define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM                 0x0400
 131 #define U300_SYSCON_PMC2R_APP_MISC_2_MMC                        0x0800
 132 #define U300_SYSCON_PMC2R_APP_MISC_2_CDI2                       0x0C00
 133 #define U300_SYSCON_PMC2R_APP_MISC_3_MASK                       0x3000
 134 #define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO                   0x0000
 135 #define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM                 0x1000
 136 #define U300_SYSCON_PMC2R_APP_MISC_3_MMC                        0x2000
 137 #define U300_SYSCON_PMC2R_APP_MISC_3_CDI2                       0x3000
 138 #define U300_SYSCON_PMC2R_APP_MISC_4_MASK                       0xC000
 139 #define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO                   0x0000
 140 #define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM                 0x4000
 141 #define U300_SYSCON_PMC2R_APP_MISC_4_MMC                        0x8000
 142 #define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO                   0xC000
 143 /* TODO: More SYSCON registers missing */
 144 #define U300_SYSCON_PMC3R                                       0x10C
 145 #define U300_SYSCON_PMC3R_APP_MISC_11_MASK                      0xC000
 146 #define U300_SYSCON_PMC3R_APP_MISC_11_SPI                       0x4000
 147 #define U300_SYSCON_PMC3R_APP_MISC_10_MASK                      0x3000
 148 #define U300_SYSCON_PMC3R_APP_MISC_10_SPI                       0x1000
 149 /* TODO: Missing other configs */
 150 #define U300_SYSCON_PMC4R                                       0x168
 151 #define U300_SYSCON_PMC4R_APP_MISC_12_MASK                      0x0003
 152 #define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO                  0x0000
 153 #define U300_SYSCON_PMC4R_APP_MISC_13_MASK                      0x000C
 154 #define U300_SYSCON_PMC4R_APP_MISC_13_CDI                       0x0000
 155 #define U300_SYSCON_PMC4R_APP_MISC_13_SMIA                      0x0004
 156 #define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2                     0x0008
 157 #define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO                  0x000C
 158 #define U300_SYSCON_PMC4R_APP_MISC_14_MASK                      0x0030
 159 #define U300_SYSCON_PMC4R_APP_MISC_14_CDI                       0x0000
 160 #define U300_SYSCON_PMC4R_APP_MISC_14_SMIA                      0x0010
 161 #define U300_SYSCON_PMC4R_APP_MISC_14_CDI2                      0x0020
 162 #define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO                  0x0030
 163 #define U300_SYSCON_PMC4R_APP_MISC_16_MASK                      0x0300
 164 #define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13               0x0000
 165 #define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS             0x0100
 166 #define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N       0x0200
 167
 168 #define DRIVER_NAME "pinctrl-u300"
 169
 170 /*
 171  * The DB3350 has 467 pads, I have enumerated the pads clockwise around the
 172  * edges of the silicon, finger by finger. LTCORNER upper left is pad 0.
 173  * Data taken from the PadRing chart, arranged like this:
 174  *
 175  *   0 ..... 104
 176  * 466        105
 177  *   .        .
 178  *   .        .
 179  * 358        224
 180  *  357 .... 225
 181  */
 182 #define U300_NUM_PADS 467
 183
 184 /* Pad names for the pinmux subsystem */
 185 static const struct pinctrl_pin_desc u300_pads[] = {
 186         /* Pads along the top edge of the chip */
 187         PINCTRL_PIN(0, "P PAD VDD 28"),
 188         PINCTRL_PIN(1, "P PAD GND 28"),
 189         PINCTRL_PIN(2, "PO SIM RST N"),
 190         PINCTRL_PIN(3, "VSSIO 25"),
 191         PINCTRL_PIN(4, "VSSA ADDA ESDSUB"),
 192         PINCTRL_PIN(5, "PWR VSSCOMMON"),
 193         PINCTRL_PIN(6, "PI ADC I1 POS"),
 194         PINCTRL_PIN(7, "PI ADC I1 NEG"),
 195         PINCTRL_PIN(8, "PWR VSSAD0"),
 196         PINCTRL_PIN(9, "PWR VCCAD0"),
 197         PINCTRL_PIN(10, "PI ADC Q1 NEG"),
 198         PINCTRL_PIN(11, "PI ADC Q1 POS"),
 199         PINCTRL_PIN(12, "PWR VDDAD"),
 200         PINCTRL_PIN(13, "PWR GNDAD"),
 201         PINCTRL_PIN(14, "PI ADC I2 POS"),
 202         PINCTRL_PIN(15, "PI ADC I2 NEG"),
 203         PINCTRL_PIN(16, "PWR VSSAD1"),
 204         PINCTRL_PIN(17, "PWR VCCAD1"),
 205         PINCTRL_PIN(18, "PI ADC Q2 NEG"),
 206         PINCTRL_PIN(19, "PI ADC Q2 POS"),
 207         PINCTRL_PIN(20, "VSSA ADDA ESDSUB"),
 208         PINCTRL_PIN(21, "PWR VCCGPAD"),
 209         PINCTRL_PIN(22, "PI TX POW"),
 210         PINCTRL_PIN(23, "PWR VSSGPAD"),
 211         PINCTRL_PIN(24, "PO DAC I POS"),
 212         PINCTRL_PIN(25, "PO DAC I NEG"),
 213         PINCTRL_PIN(26, "PO DAC Q POS"),
 214         PINCTRL_PIN(27, "PO DAC Q NEG"),
 215         PINCTRL_PIN(28, "PWR VSSDA"),
 216         PINCTRL_PIN(29, "PWR VCCDA"),
 217         PINCTRL_PIN(30, "VSSA ADDA ESDSUB"),
 218         PINCTRL_PIN(31, "P PAD VDDIO 11"),
 219         PINCTRL_PIN(32, "PI PLL 26 FILTVDD"),
 220         PINCTRL_PIN(33, "PI PLL 26 VCONT"),
 221         PINCTRL_PIN(34, "PWR AGNDPLL2V5 32 13"),
 222         PINCTRL_PIN(35, "PWR AVDDPLL2V5 32 13"),
 223         PINCTRL_PIN(36, "VDDA PLL ESD"),
 224         PINCTRL_PIN(37, "VSSA PLL ESD"),
 225         PINCTRL_PIN(38, "VSS PLL"),
 226         PINCTRL_PIN(39, "VDDC PLL"),
 227         PINCTRL_PIN(40, "PWR AGNDPLL2V5 26 60"),
 228         PINCTRL_PIN(41, "PWR AVDDPLL2V5 26 60"),
 229         PINCTRL_PIN(42, "PWR AVDDPLL2V5 26 208"),
 230         PINCTRL_PIN(43, "PWR AGNDPLL2V5 26 208"),
 231         PINCTRL_PIN(44, "PWR AVDDPLL2V5 13 208"),
 232         PINCTRL_PIN(45, "PWR AGNDPLL2V5 13 208"),
 233         PINCTRL_PIN(46, "P PAD VSSIO 11"),
 234         PINCTRL_PIN(47, "P PAD VSSIO 12"),
 235         PINCTRL_PIN(48, "PI POW RST N"),
 236         PINCTRL_PIN(49, "VDDC IO"),
 237         PINCTRL_PIN(50, "P PAD VDDIO 16"),
 238         PINCTRL_PIN(51, "PO RF WCDMA EN 4"),
 239         PINCTRL_PIN(52, "PO RF WCDMA EN 3"),
 240         PINCTRL_PIN(53, "PO RF WCDMA EN 2"),
 241         PINCTRL_PIN(54, "PO RF WCDMA EN 1"),
 242         PINCTRL_PIN(55, "PO RF WCDMA EN 0"),
 243         PINCTRL_PIN(56, "PO GSM PA ENABLE"),
 244         PINCTRL_PIN(57, "PO RF DATA STRB"),
 245         PINCTRL_PIN(58, "PO RF DATA2"),
 246         PINCTRL_PIN(59, "PIO RF DATA1"),
 247         PINCTRL_PIN(60, "PIO RF DATA0"),
 248         PINCTRL_PIN(61, "P PAD VDD 11"),
 249         PINCTRL_PIN(62, "P PAD GND 11"),
 250         PINCTRL_PIN(63, "P PAD VSSIO 16"),
 251         PINCTRL_PIN(64, "P PAD VDDIO 18"),
 252         PINCTRL_PIN(65, "PO RF CTRL STRB2"),
 253         PINCTRL_PIN(66, "PO RF CTRL STRB1"),
 254         PINCTRL_PIN(67, "PO RF CTRL STRB0"),
 255         PINCTRL_PIN(68, "PIO RF CTRL DATA"),
 256         PINCTRL_PIN(69, "PO RF CTRL CLK"),
 257         PINCTRL_PIN(70, "PO TX ADC STRB"),
 258         PINCTRL_PIN(71, "PO ANT SW 2"),
 259         PINCTRL_PIN(72, "PO ANT SW 3"),
 260         PINCTRL_PIN(73, "PO ANT SW 0"),
 261         PINCTRL_PIN(74, "PO ANT SW 1"),
 262         PINCTRL_PIN(75, "PO M CLKRQ"),
 263         PINCTRL_PIN(76, "PI M CLK"),
 264         PINCTRL_PIN(77, "PI RTC CLK"),
 265         PINCTRL_PIN(78, "P PAD VDD 8"),
 266         PINCTRL_PIN(79, "P PAD GND 8"),
 267         PINCTRL_PIN(80, "P PAD VSSIO 13"),
 268         PINCTRL_PIN(81, "P PAD VDDIO 13"),
 269         PINCTRL_PIN(82, "PO SYS 1 CLK"),
 270         PINCTRL_PIN(83, "PO SYS 2 CLK"),
 271         PINCTRL_PIN(84, "PO SYS 0 CLK"),
 272         PINCTRL_PIN(85, "PI SYS 0 CLKRQ"),
 273         PINCTRL_PIN(86, "PO PWR MNGT CTRL 1"),
 274         PINCTRL_PIN(87, "PO PWR MNGT CTRL 0"),
 275         PINCTRL_PIN(88, "PO RESOUT2 RST N"),
 276         PINCTRL_PIN(89, "PO RESOUT1 RST N"),
 277         PINCTRL_PIN(90, "PO RESOUT0 RST N"),
 278         PINCTRL_PIN(91, "PI SERVICE N"),
 279         PINCTRL_PIN(92, "P PAD VDD 29"),
 280         PINCTRL_PIN(93, "P PAD GND 29"),
 281         PINCTRL_PIN(94, "P PAD VSSIO 8"),
 282         PINCTRL_PIN(95, "P PAD VDDIO 8"),
 283         PINCTRL_PIN(96, "PI EXT IRQ1 N"),
 284         PINCTRL_PIN(97, "PI EXT IRQ0 N"),
 285         PINCTRL_PIN(98, "PIO DC ON"),
 286         PINCTRL_PIN(99, "PIO ACC APP I2C DATA"),
 287         PINCTRL_PIN(100, "PIO ACC APP I2C CLK"),
 288         PINCTRL_PIN(101, "P PAD VDD 12"),
 289         PINCTRL_PIN(102, "P PAD GND 12"),
 290         PINCTRL_PIN(103, "P PAD VSSIO 14"),
 291         PINCTRL_PIN(104, "P PAD VDDIO 14"),
 292         /* Pads along the right edge of the chip */
 293         PINCTRL_PIN(105, "PIO APP I2C1 DATA"),
 294         PINCTRL_PIN(106, "PIO APP I2C1 CLK"),
 295         PINCTRL_PIN(107, "PO KEY OUT0"),
 296         PINCTRL_PIN(108, "PO KEY OUT1"),
 297         PINCTRL_PIN(109, "PO KEY OUT2"),
 298         PINCTRL_PIN(110, "PO KEY OUT3"),
 299         PINCTRL_PIN(111, "PO KEY OUT4"),
 300         PINCTRL_PIN(112, "PI KEY IN0"),
 301         PINCTRL_PIN(113, "PI KEY IN1"),
 302         PINCTRL_PIN(114, "PI KEY IN2"),
 303         PINCTRL_PIN(115, "P PAD VDDIO 15"),
 304         PINCTRL_PIN(116, "P PAD VSSIO 15"),
 305         PINCTRL_PIN(117, "P PAD GND 13"),
 306         PINCTRL_PIN(118, "P PAD VDD 13"),
 307         PINCTRL_PIN(119, "PI KEY IN3"),
 308         PINCTRL_PIN(120, "PI KEY IN4"),
 309         PINCTRL_PIN(121, "PI KEY IN5"),
 310         PINCTRL_PIN(122, "PIO APP PCM I2S1 DATA B"),
 311         PINCTRL_PIN(123, "PIO APP PCM I2S1 DATA A"),
 312         PINCTRL_PIN(124, "PIO APP PCM I2S1 WS"),
 313         PINCTRL_PIN(125, "PIO APP PCM I2S1 CLK"),
 314         PINCTRL_PIN(126, "PIO APP PCM I2S0 DATA B"),
 315         PINCTRL_PIN(127, "PIO APP PCM I2S0 DATA A"),
 316         PINCTRL_PIN(128, "PIO APP PCM I2S0 WS"),
 317         PINCTRL_PIN(129, "PIO APP PCM I2S0 CLK"),
 318         PINCTRL_PIN(130, "P PAD VDD 17"),
 319         PINCTRL_PIN(131, "P PAD GND 17"),
 320         PINCTRL_PIN(132, "P PAD VSSIO 19"),
 321         PINCTRL_PIN(133, "P PAD VDDIO 19"),
 322         PINCTRL_PIN(134, "UART0 RTS"),
 323         PINCTRL_PIN(135, "UART0 CTS"),
 324         PINCTRL_PIN(136, "UART0 TX"),
 325         PINCTRL_PIN(137, "UART0 RX"),
 326         PINCTRL_PIN(138, "PIO ACC SPI DO"),
 327         PINCTRL_PIN(139, "PIO ACC SPI DI"),
 328         PINCTRL_PIN(140, "PIO ACC SPI CS0 N"),
 329         PINCTRL_PIN(141, "PIO ACC SPI CS1 N"),
 330         PINCTRL_PIN(142, "PIO ACC SPI CS2 N"),
 331         PINCTRL_PIN(143, "PIO ACC SPI CLK"),
 332         PINCTRL_PIN(144, "PO PDI EXT RST N"),
 333         PINCTRL_PIN(145, "P PAD VDDIO 22"),
 334         PINCTRL_PIN(146, "P PAD VSSIO 22"),
 335         PINCTRL_PIN(147, "P PAD GND 18"),
 336         PINCTRL_PIN(148, "P PAD VDD 18"),
 337         PINCTRL_PIN(149, "PIO PDI C0"),
 338         PINCTRL_PIN(150, "PIO PDI C1"),
 339         PINCTRL_PIN(151, "PIO PDI C2"),
 340         PINCTRL_PIN(152, "PIO PDI C3"),
 341         PINCTRL_PIN(153, "PIO PDI C4"),
 342         PINCTRL_PIN(154, "PIO PDI C5"),
 343         PINCTRL_PIN(155, "PIO PDI D0"),
 344         PINCTRL_PIN(156, "PIO PDI D1"),
 345         PINCTRL_PIN(157, "PIO PDI D2"),
 346         PINCTRL_PIN(158, "PIO PDI D3"),
 347         PINCTRL_PIN(159, "P PAD VDDIO 21"),
 348         PINCTRL_PIN(160, "P PAD VSSIO 21"),
 349         PINCTRL_PIN(161, "PIO PDI D4"),
 350         PINCTRL_PIN(162, "PIO PDI D5"),
 351         PINCTRL_PIN(163, "PIO PDI D6"),
 352         PINCTRL_PIN(164, "PIO PDI D7"),
 353         PINCTRL_PIN(165, "PIO MS INS"),
 354         PINCTRL_PIN(166, "MMC DATA DIR LS"),
 355         PINCTRL_PIN(167, "MMC DATA 3"),
 356         PINCTRL_PIN(168, "MMC DATA 2"),
 357         PINCTRL_PIN(169, "MMC DATA 1"),
 358         PINCTRL_PIN(170, "MMC DATA 0"),
 359         PINCTRL_PIN(171, "MMC CMD DIR LS"),
 360         PINCTRL_PIN(172, "P PAD VDD 27"),
 361         PINCTRL_PIN(173, "P PAD GND 27"),
 362         PINCTRL_PIN(174, "P PAD VSSIO 20"),
 363         PINCTRL_PIN(175, "P PAD VDDIO 20"),
 364         PINCTRL_PIN(176, "MMC CMD"),
 365         PINCTRL_PIN(177, "MMC CLK"),
 366         PINCTRL_PIN(178, "PIO APP GPIO 14"),
 367         PINCTRL_PIN(179, "PIO APP GPIO 13"),
 368         PINCTRL_PIN(180, "PIO APP GPIO 11"),
 369         PINCTRL_PIN(181, "PIO APP GPIO 25"),
 370         PINCTRL_PIN(182, "PIO APP GPIO 24"),
 371         PINCTRL_PIN(183, "PIO APP GPIO 23"),
 372         PINCTRL_PIN(184, "PIO APP GPIO 22"),
 373         PINCTRL_PIN(185, "PIO APP GPIO 21"),
 374         PINCTRL_PIN(186, "PIO APP GPIO 20"),
 375         PINCTRL_PIN(187, "P PAD VDD 19"),
 376         PINCTRL_PIN(188, "P PAD GND 19"),
 377         PINCTRL_PIN(189, "P PAD VSSIO 23"),
 378         PINCTRL_PIN(190, "P PAD VDDIO 23"),
 379         PINCTRL_PIN(191, "PIO APP GPIO 19"),
 380         PINCTRL_PIN(192, "PIO APP GPIO 18"),
 381         PINCTRL_PIN(193, "PIO APP GPIO 17"),
 382         PINCTRL_PIN(194, "PIO APP GPIO 16"),
 383         PINCTRL_PIN(195, "PI CI D1"),
 384         PINCTRL_PIN(196, "PI CI D0"),
 385         PINCTRL_PIN(197, "PI CI HSYNC"),
 386         PINCTRL_PIN(198, "PI CI VSYNC"),
 387         PINCTRL_PIN(199, "PI CI EXT CLK"),
 388         PINCTRL_PIN(200, "PO CI EXT RST N"),
 389         PINCTRL_PIN(201, "P PAD VSSIO 43"),
 390         PINCTRL_PIN(202, "P PAD VDDIO 43"),
 391         PINCTRL_PIN(203, "PI CI D6"),
 392         PINCTRL_PIN(204, "PI CI D7"),
 393         PINCTRL_PIN(205, "PI CI D2"),
 394         PINCTRL_PIN(206, "PI CI D3"),
 395         PINCTRL_PIN(207, "PI CI D4"),
 396         PINCTRL_PIN(208, "PI CI D5"),
 397         PINCTRL_PIN(209, "PI CI D8"),
 398         PINCTRL_PIN(210, "PI CI D9"),
 399         PINCTRL_PIN(211, "P PAD VDD 20"),
 400         PINCTRL_PIN(212, "P PAD GND 20"),
 401         PINCTRL_PIN(213, "P PAD VSSIO 24"),
 402         PINCTRL_PIN(214, "P PAD VDDIO 24"),
 403         PINCTRL_PIN(215, "P PAD VDDIO 26"),
 404         PINCTRL_PIN(216, "PO EMIF 1 A26"),
 405         PINCTRL_PIN(217, "PO EMIF 1 A25"),
 406         PINCTRL_PIN(218, "P PAD VSSIO 26"),
 407         PINCTRL_PIN(219, "PO EMIF 1 A24"),
 408         PINCTRL_PIN(220, "PO EMIF 1 A23"),
 409         /* Pads along the bottom edge of the chip */
 410         PINCTRL_PIN(221, "PO EMIF 1 A22"),
 411         PINCTRL_PIN(222, "PO EMIF 1 A21"),
 412         PINCTRL_PIN(223, "P PAD VDD 21"),
 413         PINCTRL_PIN(224, "P PAD GND 21"),
 414         PINCTRL_PIN(225, "P PAD VSSIO 27"),
 415         PINCTRL_PIN(226, "P PAD VDDIO 27"),
 416         PINCTRL_PIN(227, "PO EMIF 1 A20"),
 417         PINCTRL_PIN(228, "PO EMIF 1 A19"),
 418         PINCTRL_PIN(229, "PO EMIF 1 A18"),
 419         PINCTRL_PIN(230, "PO EMIF 1 A17"),
 420         PINCTRL_PIN(231, "P PAD VDDIO 28"),
 421         PINCTRL_PIN(232, "P PAD VSSIO 28"),
 422         PINCTRL_PIN(233, "PO EMIF 1 A16"),
 423         PINCTRL_PIN(234, "PIO EMIF 1 D15"),
 424         PINCTRL_PIN(235, "PO EMIF 1 A15"),
 425         PINCTRL_PIN(236, "PIO EMIF 1 D14"),
 426         PINCTRL_PIN(237, "P PAD VDD 22"),
 427         PINCTRL_PIN(238, "P PAD GND 22"),
 428         PINCTRL_PIN(239, "P PAD VSSIO 29"),
 429         PINCTRL_PIN(240, "P PAD VDDIO 29"),
 430         PINCTRL_PIN(241, "PO EMIF 1 A14"),
 431         PINCTRL_PIN(242, "PIO EMIF 1 D13"),
 432         PINCTRL_PIN(243, "PO EMIF 1 A13"),
 433         PINCTRL_PIN(244, "PIO EMIF 1 D12"),
 434         PINCTRL_PIN(245, "P PAD VSSIO 30"),
 435         PINCTRL_PIN(246, "P PAD VDDIO 30"),
 436         PINCTRL_PIN(247, "PO EMIF 1 A12"),
 437         PINCTRL_PIN(248, "PIO EMIF 1 D11"),
 438         PINCTRL_PIN(249, "PO EMIF 1 A11"),
 439         PINCTRL_PIN(250, "PIO EMIF 1 D10"),
 440         PINCTRL_PIN(251, "P PAD VSSIO 31"),
 441         PINCTRL_PIN(252, "P PAD VDDIO 31"),
 442         PINCTRL_PIN(253, "PO EMIF 1 A10"),
 443         PINCTRL_PIN(254, "PIO EMIF 1 D09"),
 444         PINCTRL_PIN(255, "PO EMIF 1 A09"),
 445         PINCTRL_PIN(256, "P PAD VDDIO 32"),
 446         PINCTRL_PIN(257, "P PAD VSSIO 32"),
 447         PINCTRL_PIN(258, "P PAD GND 24"),
 448         PINCTRL_PIN(259, "P PAD VDD 24"),
 449         PINCTRL_PIN(260, "PIO EMIF 1 D08"),
 450         PINCTRL_PIN(261, "PO EMIF 1 A08"),
 451         PINCTRL_PIN(262, "PIO EMIF 1 D07"),
 452         PINCTRL_PIN(263, "PO EMIF 1 A07"),
 453         PINCTRL_PIN(264, "P PAD VDDIO 33"),
 454         PINCTRL_PIN(265, "P PAD VSSIO 33"),
 455         PINCTRL_PIN(266, "PIO EMIF 1 D06"),
 456         PINCTRL_PIN(267, "PO EMIF 1 A06"),
 457         PINCTRL_PIN(268, "PIO EMIF 1 D05"),
 458         PINCTRL_PIN(269, "PO EMIF 1 A05"),
 459         PINCTRL_PIN(270, "P PAD VDDIO 34"),
 460         PINCTRL_PIN(271, "P PAD VSSIO 34"),
 461         PINCTRL_PIN(272, "PIO EMIF 1 D04"),
 462         PINCTRL_PIN(273, "PO EMIF 1 A04"),
 463         PINCTRL_PIN(274, "PIO EMIF 1 D03"),
 464         PINCTRL_PIN(275, "PO EMIF 1 A03"),
 465         PINCTRL_PIN(276, "P PAD VDDIO 35"),
 466         PINCTRL_PIN(277, "P PAD VSSIO 35"),
 467         PINCTRL_PIN(278, "P PAD GND 23"),
 468         PINCTRL_PIN(279, "P PAD VDD 23"),
 469         PINCTRL_PIN(280, "PIO EMIF 1 D02"),
 470         PINCTRL_PIN(281, "PO EMIF 1 A02"),
 471         PINCTRL_PIN(282, "PIO EMIF 1 D01"),
 472         PINCTRL_PIN(283, "PO EMIF 1 A01"),
 473         PINCTRL_PIN(284, "P PAD VDDIO 36"),
 474         PINCTRL_PIN(285, "P PAD VSSIO 36"),
 475         PINCTRL_PIN(286, "PIO EMIF 1 D00"),
 476         PINCTRL_PIN(287, "PO EMIF 1 BE1 N"),
 477         PINCTRL_PIN(288, "PO EMIF 1 BE0 N"),
 478         PINCTRL_PIN(289, "PO EMIF 1 ADV N"),
 479         PINCTRL_PIN(290, "P PAD VDDIO 37"),
 480         PINCTRL_PIN(291, "P PAD VSSIO 37"),
 481         PINCTRL_PIN(292, "PO EMIF 1 SD CKE0"),
 482         PINCTRL_PIN(293, "PO EMIF 1 OE N"),
 483         PINCTRL_PIN(294, "PO EMIF 1 WE N"),
 484         PINCTRL_PIN(295, "P PAD VDDIO 38"),
 485         PINCTRL_PIN(296, "P PAD VSSIO 38"),
 486         PINCTRL_PIN(297, "PO EMIF 1 CLK"),
 487         PINCTRL_PIN(298, "PIO EMIF 1 SD CLK"),
 488         PINCTRL_PIN(299, "P PAD VSSIO 45 (not bonded)"),
 489         PINCTRL_PIN(300, "P PAD VDDIO 42"),
 490         PINCTRL_PIN(301, "P PAD VSSIO 42"),
 491         PINCTRL_PIN(302, "P PAD GND 31"),
 492         PINCTRL_PIN(303, "P PAD VDD 31"),
 493         PINCTRL_PIN(304, "PI EMIF 1 RET CLK"),
 494         PINCTRL_PIN(305, "PI EMIF 1 WAIT N"),
 495         PINCTRL_PIN(306, "PI EMIF 1 NFIF READY"),
 496         PINCTRL_PIN(307, "PO EMIF 1 SD CKE1"),
 497         PINCTRL_PIN(308, "PO EMIF 1 CS3 N"),
 498         PINCTRL_PIN(309, "P PAD VDD 25"),
 499         PINCTRL_PIN(310, "P PAD GND 25"),
 500         PINCTRL_PIN(311, "P PAD VSSIO 39"),
 501         PINCTRL_PIN(312, "P PAD VDDIO 39"),
 502         PINCTRL_PIN(313, "PO EMIF 1 CS2 N"),
 503         PINCTRL_PIN(314, "PO EMIF 1 CS1 N"),
 504         PINCTRL_PIN(315, "PO EMIF 1 CS0 N"),
 505         PINCTRL_PIN(316, "PO ETM TRACE PKT0"),
 506         PINCTRL_PIN(317, "PO ETM TRACE PKT1"),
 507         PINCTRL_PIN(318, "PO ETM TRACE PKT2"),
 508         PINCTRL_PIN(319, "P PAD VDD 30"),
 509         PINCTRL_PIN(320, "P PAD GND 30"),
 510         PINCTRL_PIN(321, "P PAD VSSIO 44"),
 511         PINCTRL_PIN(322, "P PAD VDDIO 44"),
 512         PINCTRL_PIN(323, "PO ETM TRACE PKT3"),
 513         PINCTRL_PIN(324, "PO ETM TRACE PKT4"),
 514         PINCTRL_PIN(325, "PO ETM TRACE PKT5"),
 515         PINCTRL_PIN(326, "PO ETM TRACE PKT6"),
 516         PINCTRL_PIN(327, "PO ETM TRACE PKT7"),
 517         PINCTRL_PIN(328, "PO ETM PIPE STAT0"),
 518         PINCTRL_PIN(329, "P PAD VDD 26"),
 519         PINCTRL_PIN(330, "P PAD GND 26"),
 520         PINCTRL_PIN(331, "P PAD VSSIO 40"),
 521         PINCTRL_PIN(332, "P PAD VDDIO 40"),
 522         PINCTRL_PIN(333, "PO ETM PIPE STAT1"),
 523         PINCTRL_PIN(334, "PO ETM PIPE STAT2"),
 524         PINCTRL_PIN(335, "PO ETM TRACE CLK"),
 525         PINCTRL_PIN(336, "PO ETM TRACE SYNC"),
 526         PINCTRL_PIN(337, "PIO ACC GPIO 33"),
 527         PINCTRL_PIN(338, "PIO ACC GPIO 32"),
 528         PINCTRL_PIN(339, "PIO ACC GPIO 30"),
 529         PINCTRL_PIN(340, "PIO ACC GPIO 29"),
 530         PINCTRL_PIN(341, "P PAD VDDIO 17"),
 531         PINCTRL_PIN(342, "P PAD VSSIO 17"),
 532         PINCTRL_PIN(343, "P PAD GND 15"),
 533         PINCTRL_PIN(344, "P PAD VDD 15"),
 534         PINCTRL_PIN(345, "PIO ACC GPIO 28"),
 535         PINCTRL_PIN(346, "PIO ACC GPIO 27"),
 536         PINCTRL_PIN(347, "PIO ACC GPIO 16"),
 537         PINCTRL_PIN(348, "PI TAP TMS"),
 538         PINCTRL_PIN(349, "PI TAP TDI"),
 539         PINCTRL_PIN(350, "PO TAP TDO"),
 540         PINCTRL_PIN(351, "PI TAP RST N"),
 541         /* Pads along the left edge of the chip */
 542         PINCTRL_PIN(352, "PI EMU MODE 0"),
 543         PINCTRL_PIN(353, "PO TAP RET CLK"),
 544         PINCTRL_PIN(354, "PI TAP CLK"),
 545         PINCTRL_PIN(355, "PO EMIF 0 SD CS N"),
 546         PINCTRL_PIN(356, "PO EMIF 0 SD CAS N"),
 547         PINCTRL_PIN(357, "PO EMIF 0 SD WE N"),
 548         PINCTRL_PIN(358, "P PAD VDDIO 1"),
 549         PINCTRL_PIN(359, "P PAD VSSIO 1"),
 550         PINCTRL_PIN(360, "P PAD GND 1"),
 551         PINCTRL_PIN(361, "P PAD VDD 1"),
 552         PINCTRL_PIN(362, "PO EMIF 0 SD CKE"),
 553         PINCTRL_PIN(363, "PO EMIF 0 SD DQML"),
 554         PINCTRL_PIN(364, "PO EMIF 0 SD DQMU"),
 555         PINCTRL_PIN(365, "PO EMIF 0 SD RAS N"),
 556         PINCTRL_PIN(366, "PIO EMIF 0 D15"),
 557         PINCTRL_PIN(367, "PO EMIF 0 A15"),
 558         PINCTRL_PIN(368, "PIO EMIF 0 D14"),
 559         PINCTRL_PIN(369, "PO EMIF 0 A14"),
 560         PINCTRL_PIN(370, "PIO EMIF 0 D13"),
 561         PINCTRL_PIN(371, "PO EMIF 0 A13"),
 562         PINCTRL_PIN(372, "P PAD VDDIO 2"),
 563         PINCTRL_PIN(373, "P PAD VSSIO 2"),
 564         PINCTRL_PIN(374, "P PAD GND 2"),
 565         PINCTRL_PIN(375, "P PAD VDD 2"),
 566         PINCTRL_PIN(376, "PIO EMIF 0 D12"),
 567         PINCTRL_PIN(377, "PO EMIF 0 A12"),
 568         PINCTRL_PIN(378, "PIO EMIF 0 D11"),
 569         PINCTRL_PIN(379, "PO EMIF 0 A11"),
 570         PINCTRL_PIN(380, "PIO EMIF 0 D10"),
 571         PINCTRL_PIN(381, "PO EMIF 0 A10"),
 572         PINCTRL_PIN(382, "PIO EMIF 0 D09"),
 573         PINCTRL_PIN(383, "PO EMIF 0 A09"),
 574         PINCTRL_PIN(384, "PIO EMIF 0 D08"),
 575         PINCTRL_PIN(385, "PO EMIF 0 A08"),
 576         PINCTRL_PIN(386, "PIO EMIF 0 D07"),
 577         PINCTRL_PIN(387, "PO EMIF 0 A07"),
 578         PINCTRL_PIN(388, "P PAD VDDIO 3"),
 579         PINCTRL_PIN(389, "P PAD VSSIO 3"),
 580         PINCTRL_PIN(390, "P PAD GND 3"),
 581         PINCTRL_PIN(391, "P PAD VDD 3"),
 582         PINCTRL_PIN(392, "PO EFUSE RDOUT1"),
 583         PINCTRL_PIN(393, "PIO EMIF 0 D06"),
 584         PINCTRL_PIN(394, "PO EMIF 0 A06"),
 585         PINCTRL_PIN(395, "PIO EMIF 0 D05"),
 586         PINCTRL_PIN(396, "PO EMIF 0 A05"),
 587         PINCTRL_PIN(397, "PIO EMIF 0 D04"),
 588         PINCTRL_PIN(398, "PO EMIF 0 A04"),
 589         PINCTRL_PIN(399, "A PADS/A VDDCO1v82v5 GND 80U SF LIN VDDCO AF"),
 590         PINCTRL_PIN(400, "PWR VDDCO AF"),
 591         PINCTRL_PIN(401, "PWR EFUSE HV1"),
 592         PINCTRL_PIN(402, "P PAD VSSIO 4"),
 593         PINCTRL_PIN(403, "P PAD VDDIO 4"),
 594         PINCTRL_PIN(404, "P PAD GND 4"),
 595         PINCTRL_PIN(405, "P PAD VDD 4"),
 596         PINCTRL_PIN(406, "PIO EMIF 0 D03"),
 597         PINCTRL_PIN(407, "PO EMIF 0 A03"),
 598         PINCTRL_PIN(408, "PWR EFUSE HV2"),
 599         PINCTRL_PIN(409, "PWR EFUSE HV3"),
 600         PINCTRL_PIN(410, "PIO EMIF 0 D02"),
 601         PINCTRL_PIN(411, "PO EMIF 0 A02"),
 602         PINCTRL_PIN(412, "PIO EMIF 0 D01"),
 603         PINCTRL_PIN(413, "P PAD VDDIO 5"),
 604         PINCTRL_PIN(414, "P PAD VSSIO 5"),
 605         PINCTRL_PIN(415, "P PAD GND 5"),
 606         PINCTRL_PIN(416, "P PAD VDD 5"),
 607         PINCTRL_PIN(417, "PO EMIF 0 A01"),
 608         PINCTRL_PIN(418, "PIO EMIF 0 D00"),
 609         PINCTRL_PIN(419, "IF 0 SD CLK"),
 610         PINCTRL_PIN(420, "APP SPI CLK"),
 611         PINCTRL_PIN(421, "APP SPI DO"),
 612         PINCTRL_PIN(422, "APP SPI DI"),
 613         PINCTRL_PIN(423, "APP SPI CS0"),
 614         PINCTRL_PIN(424, "APP SPI CS1"),
 615         PINCTRL_PIN(425, "APP SPI CS2"),
 616         PINCTRL_PIN(426, "PIO APP GPIO 10"),
 617         PINCTRL_PIN(427, "P PAD VDDIO 41"),
 618         PINCTRL_PIN(428, "P PAD VSSIO 41"),
 619         PINCTRL_PIN(429, "P PAD GND 6"),
 620         PINCTRL_PIN(430, "P PAD VDD 6"),
 621         PINCTRL_PIN(431, "PIO ACC SDIO0 CMD"),
 622         PINCTRL_PIN(432, "PIO ACC SDIO0 CK"),
 623         PINCTRL_PIN(433, "PIO ACC SDIO0 D3"),
 624         PINCTRL_PIN(434, "PIO ACC SDIO0 D2"),
 625         PINCTRL_PIN(435, "PIO ACC SDIO0 D1"),
 626         PINCTRL_PIN(436, "PIO ACC SDIO0 D0"),
 627         PINCTRL_PIN(437, "PIO USB PU"),
 628         PINCTRL_PIN(438, "PIO USB SP"),
 629         PINCTRL_PIN(439, "PIO USB DAT VP"),
 630         PINCTRL_PIN(440, "PIO USB SE0 VM"),
 631         PINCTRL_PIN(441, "PIO USB OE"),
 632         PINCTRL_PIN(442, "PIO USB SUSP"),
 633         PINCTRL_PIN(443, "P PAD VSSIO 6"),
 634         PINCTRL_PIN(444, "P PAD VDDIO 6"),
 635         PINCTRL_PIN(445, "PIO USB PUEN"),
 636         PINCTRL_PIN(446, "PIO ACC UART0 RX"),
 637         PINCTRL_PIN(447, "PIO ACC UART0 TX"),
 638         PINCTRL_PIN(448, "PIO ACC UART0 CTS"),
 639         PINCTRL_PIN(449, "PIO ACC UART0 RTS"),
 640         PINCTRL_PIN(450, "PIO ACC UART3 RX"),
 641         PINCTRL_PIN(451, "PIO ACC UART3 TX"),
 642         PINCTRL_PIN(452, "PIO ACC UART3 CTS"),
 643         PINCTRL_PIN(453, "PIO ACC UART3 RTS"),
 644         PINCTRL_PIN(454, "PIO ACC IRDA TX"),
 645         PINCTRL_PIN(455, "P PAD VDDIO 7"),
 646         PINCTRL_PIN(456, "P PAD VSSIO 7"),
 647         PINCTRL_PIN(457, "P PAD GND 7"),
 648         PINCTRL_PIN(458, "P PAD VDD 7"),
 649         PINCTRL_PIN(459, "PIO ACC IRDA RX"),
 650         PINCTRL_PIN(460, "PIO ACC PCM I2S CLK"),
 651         PINCTRL_PIN(461, "PIO ACC PCM I2S WS"),
 652         PINCTRL_PIN(462, "PIO ACC PCM I2S DATA A"),
 653         PINCTRL_PIN(463, "PIO ACC PCM I2S DATA B"),
 654         PINCTRL_PIN(464, "PO SIM CLK"),
 655         PINCTRL_PIN(465, "PIO ACC IRDA SD"),
 656         PINCTRL_PIN(466, "PIO SIM DATA"),
 657 };
 658
 659 /**
 660  * @dev: a pointer back to containing device
 661  * @virtbase: the offset to the controller in virtual memory
 662  */
 663 struct u300_pmx {
 664         struct device *dev;
 665         struct pinctrl_dev *pctl;
 666         void __iomem *virtbase;
 667 };
 668
 669 /**
 670  * u300_pmx_registers - the array of registers read/written for each pinmux
 671  * shunt setting
 672  */
 673 const u32 u300_pmx_registers[] = {
 674         U300_SYSCON_PMC1LR,
 675         U300_SYSCON_PMC1HR,
 676         U300_SYSCON_PMC2R,
 677         U300_SYSCON_PMC3R,
 678         U300_SYSCON_PMC4R,
 679 };
 680
 681 /**
 682  * struct u300_pin_group - describes a U300 pin group
 683  * @name: the name of this specific pin group
 684  * @pins: an array of discrete physical pins used in this group, taken
 685  *      from the driver-local pin enumeration space
 686  * @num_pins: the number of pins in this group array, i.e. the number of
 687  *      elements in .pins so we can iterate over that array
 688  */
 689 struct u300_pin_group {
 690         const char *name;
 691         const unsigned int *pins;
 692         const unsigned num_pins;
 693 };
 694
 695 /**
 696  * struct pmx_onmask - mask bits to enable/disable padmux
 697  * @mask: mask bits to disable
 698  * @val: mask bits to enable
 699  *
 700  * onmask lazy dog:
 701  * onmask = {
 702  *   {"PMC1LR" mask, "PMC1LR" value},
 703  *   {"PMC1HR" mask, "PMC1HR" value},
 704  *   {"PMC2R"  mask, "PMC2R"  value},
 705  *   {"PMC3R"  mask, "PMC3R"  value},
 706  *   {"PMC4R"  mask, "PMC4R"  value}
 707  * }
 708  */
 709 struct u300_pmx_mask {
 710         u16 mask;
 711         u16 bits;
 712 };
 713
 714 /* The chip power pins are VDD, GND, VDDIO and VSSIO */
 715 static const unsigned power_pins[] = { 0, 1, 3, 31, 46, 47, 49, 50, 61, 62, 63,
 716         64, 78, 79, 80, 81, 92, 93, 94, 95, 101, 102, 103, 104, 115, 116, 117,
 717         118, 130, 131, 132, 133, 145, 146, 147, 148, 159, 160, 172, 173, 174,
 718         175, 187, 188, 189, 190, 201, 202, 211, 212, 213, 214, 215, 218, 223,
 719         224, 225, 226, 231, 232, 237, 238, 239, 240, 245, 246, 251, 252, 256,
 720         257, 258, 259, 264, 265, 270, 271, 276, 277, 278, 279, 284, 285, 290,
 721         291, 295, 296, 299, 300, 301, 302, 303, 309, 310, 311, 312, 319, 320,
 722         321, 322, 329, 330, 331, 332, 341, 342, 343, 344, 358, 359, 360, 361,
 723         372, 373, 374, 375, 388, 389, 390, 391, 402, 403, 404, 405, 413, 414,
 724         415, 416, 427, 428, 429, 430, 443, 444, 455, 456, 457, 458 };
 725 static const unsigned emif0_pins[] = { 355, 356, 357, 362, 363, 364, 365, 366,
 726         367, 368, 369, 370, 371, 376, 377, 378, 379, 380, 381, 382, 383, 384,
 727         385, 386, 387, 393, 394, 395, 396, 397, 398, 406, 407, 410, 411, 412,
 728         417, 418 };
 729 static const unsigned emif1_pins[] = { 216, 217, 219, 220, 221, 222, 227, 228,
 730         229, 230, 233, 234, 235, 236, 241, 242, 243, 244, 247, 248, 249, 250,
 731         253, 254, 255, 260, 261, 262, 263, 266, 267, 268, 269, 272, 273, 274,
 732         275, 280, 281, 282, 283, 286, 287, 288, 289, 292, 293, 294, 297, 298,
 733         304, 305, 306, 307, 308, 313, 314, 315 };
 734 static const unsigned uart0_pins[] = { 134, 135, 136, 137 };
 735 static const unsigned mmc0_pins[] = { 166, 167, 168, 169, 170, 171, 176, 177 };
 736 static const unsigned spi0_pins[] = { 420, 421, 422, 423, 424, 425 };
 737
 738 static const struct u300_pmx_mask emif0_mask[] = {
 739         {0, 0},
 740         {0, 0},
 741         {0, 0},
 742         {0, 0},
 743         {0, 0},
 744 };
 745
 746 static const struct u300_pmx_mask emif1_mask[] = {
 747         /*
 748          * This connects the SDRAM to CS2 and a NAND flash to
 749          * CS0 on the EMIF.
 750          */
 751         {
 752                 U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK |
 753                 U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK |
 754                 U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK |
 755                 U300_SYSCON_PMC1LR_EMIF_1_MASK,
 756                 U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM |
 757                 U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC |
 758                 U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF |
 759                 U300_SYSCON_PMC1LR_EMIF_1_SDRAM0
 760         },
 761         {0, 0},
 762         {0, 0},
 763         {0, 0},
 764         {0, 0},
 765 };
 766
 767 static const struct u300_pmx_mask uart0_mask[] = {
 768         {0, 0},
 769         {
 770                 U300_SYSCON_PMC1HR_APP_UART0_1_MASK |
 771                 U300_SYSCON_PMC1HR_APP_UART0_2_MASK,
 772                 U300_SYSCON_PMC1HR_APP_UART0_1_UART0 |
 773                 U300_SYSCON_PMC1HR_APP_UART0_2_UART0
 774         },
 775         {0, 0},
 776         {0, 0},
 777         {0, 0},
 778 };
 779
 780 static const struct u300_pmx_mask mmc0_mask[] = {
 781         { U300_SYSCON_PMC1LR_MMCSD_MASK, U300_SYSCON_PMC1LR_MMCSD_MMCSD},
 782         {0, 0},
 783         {0, 0},
 784         {0, 0},
 785         { U300_SYSCON_PMC4R_APP_MISC_12_MASK,
 786           U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO }
 787 };
 788
 789 static const struct u300_pmx_mask spi0_mask[] = {
 790         {0, 0},
 791         {
 792                 U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
 793                 U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
 794                 U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
 795                 U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
 796                 U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
 797                 U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI
 798         },
 799         {0, 0},
 800         {0, 0},
 801         {0, 0}
 802 };
 803
 804 static const struct u300_pin_group u300_pin_groups[] = {
 805         {
 806                 .name = "powergrp",
 807                 .pins = power_pins,
 808                 .num_pins = ARRAY_SIZE(power_pins),
 809         },
 810         {
 811                 .name = "emif0grp",
 812                 .pins = emif0_pins,
 813                 .num_pins = ARRAY_SIZE(emif0_pins),
 814         },
 815         {
 816                 .name = "emif1grp",
 817                 .pins = emif1_pins,
 818                 .num_pins = ARRAY_SIZE(emif1_pins),
 819         },
 820         {
 821                 .name = "uart0grp",
 822                 .pins = uart0_pins,
 823                 .num_pins = ARRAY_SIZE(uart0_pins),
 824         },
 825         {
 826                 .name = "mmc0grp",
 827                 .pins = mmc0_pins,
 828                 .num_pins = ARRAY_SIZE(mmc0_pins),
 829         },
 830         {
 831                 .name = "spi0grp",
 832                 .pins = spi0_pins,
 833                 .num_pins = ARRAY_SIZE(spi0_pins),
 834         },
 835 };
 836
 837 static int u300_get_groups_count(struct pinctrl_dev *pctldev)
 838 {
 839         return ARRAY_SIZE(u300_pin_groups);
 840 }
 841
 842 static const char *u300_get_group_name(struct pinctrl_dev *pctldev,
 843                                        unsigned selector)
 844 {
 845         return u300_pin_groups[selector].name;
 846 }
 847
 848 static int u300_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
 849                                const unsigned **pins,
 850                                unsigned *num_pins)
 851 {
 852         *pins = u300_pin_groups[selector].pins;
 853         *num_pins = u300_pin_groups[selector].num_pins;
 854         return 0;
 855 }
 856
 857 static void u300_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
 858                    unsigned offset)
 859 {
 860         seq_printf(s, " " DRIVER_NAME);
 861 }
 862
 863 static const struct pinctrl_ops u300_pctrl_ops = {
 864         .get_groups_count = u300_get_groups_count,
 865         .get_group_name = u300_get_group_name,
 866         .get_group_pins = u300_get_group_pins,
 867         .pin_dbg_show = u300_pin_dbg_show,
 868 };
 869
 870 /*
 871  * Here we define the available functions and their corresponding pin groups
 872  */
 873
 874 /**
 875  * struct u300_pmx_func - describes U300 pinmux functions
 876  * @name: the name of this specific function
 877  * @groups: corresponding pin groups
 878  * @onmask: bits to set to enable this when doing pin muxing
 879  */
 880 struct u300_pmx_func {
 881         const char *name;
 882         const char * const *groups;
 883         const unsigned num_groups;
 884         const struct u300_pmx_mask *mask;
 885 };
 886
 887 static const char * const powergrps[] = { "powergrp" };
 888 static const char * const emif0grps[] = { "emif0grp" };
 889 static const char * const emif1grps[] = { "emif1grp" };
 890 static const char * const uart0grps[] = { "uart0grp" };
 891 static const char * const mmc0grps[] = { "mmc0grp" };
 892 static const char * const spi0grps[] = { "spi0grp" };
 893
 894 static const struct u300_pmx_func u300_pmx_functions[] = {
 895         {
 896                 .name = "power",
 897                 .groups = powergrps,
 898                 .num_groups = ARRAY_SIZE(powergrps),
 899                 /* Mask is N/A */
 900         },
 901         {
 902                 .name = "emif0",
 903                 .groups = emif0grps,
 904                 .num_groups = ARRAY_SIZE(emif0grps),
 905                 .mask = emif0_mask,
 906         },
 907         {
 908                 .name = "emif1",
 909                 .groups = emif1grps,
 910                 .num_groups = ARRAY_SIZE(emif1grps),
 911                 .mask = emif1_mask,
 912         },
 913         {
 914                 .name = "uart0",
 915                 .groups = uart0grps,
 916                 .num_groups = ARRAY_SIZE(uart0grps),
 917                 .mask = uart0_mask,
 918         },
 919         {
 920                 .name = "mmc0",
 921                 .groups = mmc0grps,
 922                 .num_groups = ARRAY_SIZE(mmc0grps),
 923                 .mask = mmc0_mask,
 924         },
 925         {
 926                 .name = "spi0",
 927                 .groups = spi0grps,
 928                 .num_groups = ARRAY_SIZE(spi0grps),
 929                 .mask = spi0_mask,
 930         },
 931 };
 932
 933 static void u300_pmx_endisable(struct u300_pmx *upmx, unsigned selector,
 934                                bool enable)
 935 {
 936         u16 regval, val, mask;
 937         int i;
 938         const struct u300_pmx_mask *upmx_mask;
 939
 940         upmx_mask = u300_pmx_functions[selector].mask;
 941         for (i = 0; i < ARRAY_SIZE(u300_pmx_registers); i++) {
 942                 if (enable)
 943                         val = upmx_mask->bits;
 944                 else
 945                         val = 0;
 946
 947                 mask = upmx_mask->mask;
 948                 if (mask != 0) {
 949                         regval = readw(upmx->virtbase + u300_pmx_registers[i]);
 950                         regval &= ~mask;
 951                         regval |= val;
 952                         writew(regval, upmx->virtbase + u300_pmx_registers[i]);
 953                 }
 954                 upmx_mask++;
 955         }
 956 }
 957
 958 static int u300_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
 959                            unsigned group)
 960 {
 961         struct u300_pmx *upmx;
 962
 963         /* There is nothing to do with the power pins */
 964         if (selector == 0)
 965                 return 0;
 966
 967         upmx = pinctrl_dev_get_drvdata(pctldev);
 968         u300_pmx_endisable(upmx, selector, true);
 969
 970         return 0;
 971 }
 972
 973 static void u300_pmx_disable(struct pinctrl_dev *pctldev, unsigned selector,
 974                              unsigned group)
 975 {
 976         struct u300_pmx *upmx;
 977
 978         /* There is nothing to do with the power pins */
 979         if (selector == 0)
 980                 return;
 981
 982         upmx = pinctrl_dev_get_drvdata(pctldev);
 983         u300_pmx_endisable(upmx, selector, false);
 984 }
 985
 986 static int u300_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
 987 {
 988         return ARRAY_SIZE(u300_pmx_functions);
 989 }
 990
 991 static const char *u300_pmx_get_func_name(struct pinctrl_dev *pctldev,
 992                                           unsigned selector)
 993 {
 994         return u300_pmx_functions[selector].name;
 995 }
 996
 997 static int u300_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
 998                                const char * const **groups,
 999                                unsigned * const num_groups)
1000 {
1001         *groups = u300_pmx_functions[selector].groups;
1002         *num_groups = u300_pmx_functions[selector].num_groups;
1003         return 0;
1004 }
1005
1006 static const struct pinmux_ops u300_pmx_ops = {
1007         .get_functions_count = u300_pmx_get_funcs_count,
1008         .get_function_name = u300_pmx_get_func_name,
1009         .get_function_groups = u300_pmx_get_groups,
1010         .enable = u300_pmx_enable,
1011         .disable = u300_pmx_disable,
1012 };
1013
1014 static int u300_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
1015                                unsigned long *config)
1016 {
1017         struct pinctrl_gpio_range *range =
1018                 pinctrl_find_gpio_range_from_pin(pctldev, pin);
1019
1020         /* We get config for those pins we CAN get it for and that's it */
1021         if (!range)
1022                 return -ENOTSUPP;
1023
1024         return u300_gpio_config_get(range->gc,
1025                                     (pin - range->pin_base + range->base),
1026                                     config);
1027 }
1028
1029 static int u300_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
1030                                unsigned long config)
1031 {
1032         struct pinctrl_gpio_range *range =
1033                 pinctrl_find_gpio_range_from_pin(pctldev, pin);
1034         int ret;
1035
1036         if (!range)
1037                 return -EINVAL;
1038
1039         /* Note: none of these configurations take any argument */
1040         ret = u300_gpio_config_set(range->gc,
1041                                    (pin - range->pin_base + range->base),
1042                                    pinconf_to_config_param(config));
1043         if (ret)
1044                 return ret;
1045
1046         return 0;
1047 }
1048
1049 static const struct pinconf_ops u300_pconf_ops = {
1050         .is_generic = true,
1051         .pin_config_get = u300_pin_config_get,
1052         .pin_config_set = u300_pin_config_set,
1053 };
1054
1055 static struct pinctrl_desc u300_pmx_desc = {
1056         .name = DRIVER_NAME,
1057         .pins = u300_pads,
1058         .npins = ARRAY_SIZE(u300_pads),
1059         .pctlops = &u300_pctrl_ops,
1060         .pmxops = &u300_pmx_ops,
1061         .confops = &u300_pconf_ops,
1062         .owner = THIS_MODULE,
1063 };
1064
1065 static int u300_pmx_probe(struct platform_device *pdev)
1066 {
1067         struct u300_pmx *upmx;
1068         struct resource *res;
1069
1070         /* Create state holders etc for this driver */
1071         upmx = devm_kzalloc(&pdev->dev, sizeof(*upmx), GFP_KERNEL);
1072         if (!upmx)
1073                 return -ENOMEM;
1074
1075         upmx->dev = &pdev->dev;
1076
1077         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1078         if (!res)
1079                 return -ENOENT;
1080
1081         upmx->virtbase = devm_ioremap_resource(&pdev->dev, res);
1082         if (IS_ERR(upmx->virtbase))
1083                 return PTR_ERR(upmx->virtbase);
1084
1085         upmx->pctl = pinctrl_register(&u300_pmx_desc, &pdev->dev, upmx);
1086         if (!upmx->pctl) {
1087                 dev_err(&pdev->dev, "could not register U300 pinmux driver\n");
1088                 return -EINVAL;
1089         }
1090
1091         platform_set_drvdata(pdev, upmx);
1092
1093         dev_info(&pdev->dev, "initialized U300 pin control driver\n");
1094
1095         return 0;
1096 }
1097
1098 static int u300_pmx_remove(struct platform_device *pdev)
1099 {
1100         struct u300_pmx *upmx = platform_get_drvdata(pdev);
1101
1102         pinctrl_unregister(upmx->pctl);
1103
1104         return 0;
1105 }
1106
1107 static const struct of_device_id u300_pinctrl_match[] = {
1108         { .compatible = "stericsson,pinctrl-u300" },
1109         {},
1110 };
1111
1112
1113 static struct platform_driver u300_pmx_driver = {
1114         .driver = {
1115                 .name = DRIVER_NAME,
1116                 .owner = THIS_MODULE,
1117                 .of_match_table = u300_pinctrl_match,
1118         },
1119         .probe = u300_pmx_probe,
1120         .remove = u300_pmx_remove,
1121 };
1122
1123 static int __init u300_pmx_init(void)
1124 {
1125         return platform_driver_register(&u300_pmx_driver);
1126 }
1127 arch_initcall(u300_pmx_init);
1128
1129 static void __exit u300_pmx_exit(void)
1130 {
1131         platform_driver_unregister(&u300_pmx_driver);
1132 }
1133 module_exit(u300_pmx_exit);
1134
1135 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
1136 MODULE_DESCRIPTION("U300 pin control driver");
1137 MODULE_LICENSE("GPL v2");