drivers/phy/samsung/phy-exynos5250-usb2.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 5250 support
   4  *
   5  * Copyright (C) 2013 Samsung Electronics Co., Ltd.
   6  * Author: Kamil Debski <k.debski@samsung.com>
   7  */
   8
   9 #include <linux/delay.h>
  10 #include <linux/io.h>
  11 #include <linux/phy/phy.h>
  12 #include <linux/regmap.h>
  13 #include "phy-samsung-usb2.h"
  14
  15 /* Exynos USB PHY registers */
  16 #define EXYNOS_5250_REFCLKSEL_CRYSTAL   0x0
  17 #define EXYNOS_5250_REFCLKSEL_XO        0x1
  18 #define EXYNOS_5250_REFCLKSEL_CLKCORE   0x2
  19
  20 #define EXYNOS_5250_FSEL_9MHZ6          0x0
  21 #define EXYNOS_5250_FSEL_10MHZ          0x1
  22 #define EXYNOS_5250_FSEL_12MHZ          0x2
  23 #define EXYNOS_5250_FSEL_19MHZ2         0x3
  24 #define EXYNOS_5250_FSEL_20MHZ          0x4
  25 #define EXYNOS_5250_FSEL_24MHZ          0x5
  26 #define EXYNOS_5250_FSEL_50MHZ          0x7
  27
  28 /* Normal host */
  29 #define EXYNOS_5250_HOSTPHYCTRL0                        0x0
  30
  31 #define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL            BIT(31)
  32 #define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT        19
  33 #define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_MASK \
  34                 (0x3 << EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT)
  35 #define EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT             16
  36 #define EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK \
  37                 (0x7 << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT)
  38 #define EXYNOS_5250_HOSTPHYCTRL0_TESTBURNIN             BIT(11)
  39 #define EXYNOS_5250_HOSTPHYCTRL0_RETENABLE              BIT(10)
  40 #define EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N            BIT(9)
  41 #define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_MASK         (0x3 << 7)
  42 #define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_DUAL         (0x0 << 7)
  43 #define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ID0          (0x1 << 7)
  44 #define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ANALOGTEST   (0x2 << 7)
  45 #define EXYNOS_5250_HOSTPHYCTRL0_SIDDQ                  BIT(6)
  46 #define EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP             BIT(5)
  47 #define EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND           BIT(4)
  48 #define EXYNOS_5250_HOSTPHYCTRL0_WORDINTERFACE          BIT(3)
  49 #define EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST              BIT(2)
  50 #define EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST              BIT(1)
  51 #define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST               BIT(0)
  52
  53 /* HSIC0 & HSIC1 */
  54 #define EXYNOS_5250_HSICPHYCTRL1                        0x10
  55 #define EXYNOS_5250_HSICPHYCTRL2                        0x20
  56
  57 #define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_MASK         (0x3 << 23)
  58 #define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT      (0x2 << 23)
  59 #define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_MASK         (0x7f << 16)
  60 #define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12           (0x24 << 16)
  61 #define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_15           (0x1c << 16)
  62 #define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_16           (0x1a << 16)
  63 #define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_19_2         (0x15 << 16)
  64 #define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_20           (0x14 << 16)
  65 #define EXYNOS_5250_HSICPHYCTRLX_SIDDQ                  BIT(6)
  66 #define EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP             BIT(5)
  67 #define EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND           BIT(4)
  68 #define EXYNOS_5250_HSICPHYCTRLX_WORDINTERFACE          BIT(3)
  69 #define EXYNOS_5250_HSICPHYCTRLX_UTMISWRST              BIT(2)
  70 #define EXYNOS_5250_HSICPHYCTRLX_PHYSWRST               BIT(0)
  71
  72 /* EHCI control */
  73 #define EXYNOS_5250_HOSTEHCICTRL                        0x30
  74 #define EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN          BIT(29)
  75 #define EXYNOS_5250_HOSTEHCICTRL_ENAINCR4               BIT(28)
  76 #define EXYNOS_5250_HOSTEHCICTRL_ENAINCR8               BIT(27)
  77 #define EXYNOS_5250_HOSTEHCICTRL_ENAINCR16              BIT(26)
  78 #define EXYNOS_5250_HOSTEHCICTRL_AUTOPPDONOVRCUREN      BIT(25)
  79 #define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT        19
  80 #define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
  81                 (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
  82 #define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT        13
  83 #define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_MASK \
  84                 (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT)
  85 #define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL2_SHIFT        7
  86 #define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
  87                 (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
  88 #define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT     1
  89 #define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_MASK \
  90                 (0x1 << EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT)
  91 #define EXYNOS_5250_HOSTEHCICTRL_SIMULATIONMODE         BIT(0)
  92
  93 /* OHCI control */
  94 #define EXYNOS_5250_HOSTOHCICTRL                        0x34
  95 #define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT      1
  96 #define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_MASK \
  97                 (0x3ff << EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT)
  98 #define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVALEN          BIT(0)
  99
 100 /* USBOTG */
 101 #define EXYNOS_5250_USBOTGSYS                           0x38
 102 #define EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET          BIT(14)
 103 #define EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG          BIT(13)
 104 #define EXYNOS_5250_USBOTGSYS_PHY_SW_RST                BIT(12)
 105 #define EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT           9
 106 #define EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK \
 107                 (0x3 << EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT)
 108 #define EXYNOS_5250_USBOTGSYS_ID_PULLUP                 BIT(8)
 109 #define EXYNOS_5250_USBOTGSYS_COMMON_ON                 BIT(7)
 110 #define EXYNOS_5250_USBOTGSYS_FSEL_SHIFT                4
 111 #define EXYNOS_5250_USBOTGSYS_FSEL_MASK \
 112                 (0x3 << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT)
 113 #define EXYNOS_5250_USBOTGSYS_FORCE_SLEEP               BIT(3)
 114 #define EXYNOS_5250_USBOTGSYS_OTGDISABLE                BIT(2)
 115 #define EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG                BIT(1)
 116 #define EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND             BIT(0)
 117
 118 /* Isolation, configured in the power management unit */
 119 #define EXYNOS_5250_USB_ISOL_OTG_OFFSET         0x704
 120 #define EXYNOS_5250_USB_ISOL_HOST_OFFSET        0x708
 121 #define EXYNOS_5420_USB_ISOL_HOST_OFFSET        0x70C
 122 #define EXYNOS_5250_USB_ISOL_ENABLE             BIT(0)
 123
 124 /* Mode swtich register */
 125 #define EXYNOS_5250_MODE_SWITCH_OFFSET          0x230
 126 #define EXYNOS_5250_MODE_SWITCH_MASK            1
 127 #define EXYNOS_5250_MODE_SWITCH_DEVICE          0
 128 #define EXYNOS_5250_MODE_SWITCH_HOST            1
 129
 130 enum exynos4x12_phy_id {
 131         EXYNOS5250_DEVICE,
 132         EXYNOS5250_HOST,
 133         EXYNOS5250_HSIC0,
 134         EXYNOS5250_HSIC1,
 135 };
 136
 137 /*
 138  * exynos5250_rate_to_clk() converts the supplied clock rate to the value that
 139  * can be written to the phy register.
 140  */
 141 static int exynos5250_rate_to_clk(unsigned long rate, u32 *reg)
 142 {
 143         /* EXYNOS_5250_FSEL_MASK */
 144
 145         switch (rate) {
 146         case 9600 * KHZ:
 147                 *reg = EXYNOS_5250_FSEL_9MHZ6;
 148                 break;
 149         case 10 * MHZ:
 150                 *reg = EXYNOS_5250_FSEL_10MHZ;
 151                 break;
 152         case 12 * MHZ:
 153                 *reg = EXYNOS_5250_FSEL_12MHZ;
 154                 break;
 155         case 19200 * KHZ:
 156                 *reg = EXYNOS_5250_FSEL_19MHZ2;
 157                 break;
 158         case 20 * MHZ:
 159                 *reg = EXYNOS_5250_FSEL_20MHZ;
 160                 break;
 161         case 24 * MHZ:
 162                 *reg = EXYNOS_5250_FSEL_24MHZ;
 163                 break;
 164         case 50 * MHZ:
 165                 *reg = EXYNOS_5250_FSEL_50MHZ;
 166                 break;
 167         default:
 168                 return -EINVAL;
 169         }
 170
 171         return 0;
 172 }
 173
 174 static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on)
 175 {
 176         struct samsung_usb2_phy_driver *drv = inst->drv;
 177         u32 offset;
 178         u32 mask = EXYNOS_5250_USB_ISOL_ENABLE;
 179
 180         if (drv->cfg == &exynos5250_usb2_phy_config &&
 181             inst->cfg->id == EXYNOS5250_DEVICE)
 182                 offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET;
 183         else if (drv->cfg == &exynos5250_usb2_phy_config &&
 184                  inst->cfg->id == EXYNOS5250_HOST)
 185                 offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET;
 186         else if (drv->cfg == &exynos5420_usb2_phy_config &&
 187                  inst->cfg->id == EXYNOS5250_HOST)
 188                 offset = EXYNOS_5420_USB_ISOL_HOST_OFFSET;
 189         else
 190                 return;
 191
 192         regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
 193 }
 194
 195 static int exynos5250_power_on(struct samsung_usb2_phy_instance *inst)
 196 {
 197         struct samsung_usb2_phy_driver *drv = inst->drv;
 198         u32 ctrl0;
 199         u32 otg;
 200         u32 ehci;
 201         u32 ohci;
 202         u32 hsic;
 203
 204         switch (inst->cfg->id) {
 205         case EXYNOS5250_DEVICE:
 206                 regmap_update_bits(drv->reg_sys,
 207                                    EXYNOS_5250_MODE_SWITCH_OFFSET,
 208                                    EXYNOS_5250_MODE_SWITCH_MASK,
 209                                    EXYNOS_5250_MODE_SWITCH_DEVICE);
 210
 211                 /* OTG configuration */
 212                 otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
 213                 /* The clock */
 214                 otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
 215                 otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
 216                 /* Reset */
 217                 otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
 218                         EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
 219                         EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
 220                 otg |=  EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
 221                         EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
 222                         EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
 223                         EXYNOS_5250_USBOTGSYS_OTGDISABLE;
 224                 /* Ref clock */
 225                 otg &=  ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
 226                 otg |=  EXYNOS_5250_REFCLKSEL_CLKCORE <<
 227                                         EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
 228                 writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
 229                 udelay(100);
 230                 otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
 231                         EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
 232                         EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
 233                         EXYNOS_5250_USBOTGSYS_OTGDISABLE);
 234                 writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
 235
 236
 237                 break;
 238         case EXYNOS5250_HOST:
 239         case EXYNOS5250_HSIC0:
 240         case EXYNOS5250_HSIC1:
 241                 /* Host registers configuration */
 242                 ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
 243                 /* The clock */
 244                 ctrl0 &= ~EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK;
 245                 ctrl0 |= drv->ref_reg_val <<
 246                                         EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT;
 247
 248                 /* Reset */
 249                 ctrl0 &=        ~(EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST |
 250                                 EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL |
 251                                 EXYNOS_5250_HOSTPHYCTRL0_SIDDQ |
 252                                 EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND |
 253                                 EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP);
 254                 ctrl0 |=        EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
 255                                 EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST |
 256                                 EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N;
 257                 writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
 258                 udelay(10);
 259                 ctrl0 &=        ~(EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
 260                                 EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST);
 261                 writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
 262
 263                 /* OTG configuration */
 264                 otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
 265                 /* The clock */
 266                 otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
 267                 otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
 268                 /* Reset */
 269                 otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
 270                         EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
 271                         EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
 272                 otg |=  EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
 273                         EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
 274                         EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
 275                         EXYNOS_5250_USBOTGSYS_OTGDISABLE;
 276                 /* Ref clock */
 277                 otg &=  ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
 278                 otg |=  EXYNOS_5250_REFCLKSEL_CLKCORE <<
 279                                         EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
 280                 writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
 281                 udelay(10);
 282                 otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
 283                         EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
 284                         EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET);
 285
 286                 /* HSIC phy configuration */
 287                 hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 |
 288                                 EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT |
 289                                 EXYNOS_5250_HSICPHYCTRLX_PHYSWRST);
 290                 writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1);
 291                 writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2);
 292                 udelay(10);
 293                 hsic &= ~EXYNOS_5250_HSICPHYCTRLX_PHYSWRST;
 294                 writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1);
 295                 writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2);
 296                 /* The following delay is necessary for the reset sequence to be
 297                  * completed */
 298                 udelay(80);
 299
 300                 /* Enable EHCI DMA burst */
 301                 ehci = readl(drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
 302                 ehci |= EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN |
 303                         EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 |
 304                         EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 |
 305                         EXYNOS_5250_HOSTEHCICTRL_ENAINCR16;
 306                 writel(ehci, drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
 307
 308                 /* OHCI settings */
 309                 ohci = readl(drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
 310                 /* Following code is based on the old driver */
 311                 ohci |= 0x1 << 3;
 312                 writel(ohci, drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
 313
 314                 break;
 315         }
 316         exynos5250_isol(inst, 0);
 317
 318         return 0;
 319 }
 320
 321 static int exynos5250_power_off(struct samsung_usb2_phy_instance *inst)
 322 {
 323         struct samsung_usb2_phy_driver *drv = inst->drv;
 324         u32 ctrl0;
 325         u32 otg;
 326         u32 hsic;
 327
 328         exynos5250_isol(inst, 1);
 329
 330         switch (inst->cfg->id) {
 331         case EXYNOS5250_DEVICE:
 332                 otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
 333                 otg |= (EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
 334                         EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG |
 335                         EXYNOS_5250_USBOTGSYS_FORCE_SLEEP);
 336                 writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
 337                 break;
 338         case EXYNOS5250_HOST:
 339                 ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
 340                 ctrl0 |= (EXYNOS_5250_HOSTPHYCTRL0_SIDDQ |
 341                                 EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND |
 342                                 EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP |
 343                                 EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST |
 344                                 EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL);
 345                 writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
 346                 break;
 347         case EXYNOS5250_HSIC0:
 348         case EXYNOS5250_HSIC1:
 349                 hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 |
 350                                 EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT |
 351                                 EXYNOS_5250_HSICPHYCTRLX_SIDDQ |
 352                                 EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP |
 353                                 EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND
 354                                 );
 355                 writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1);
 356                 writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2);
 357                 break;
 358         }
 359
 360         return 0;
 361 }
 362
 363
 364 static const struct samsung_usb2_common_phy exynos5250_phys[] = {
 365         {
 366                 .label          = "device",
 367                 .id             = EXYNOS5250_DEVICE,
 368                 .power_on       = exynos5250_power_on,
 369                 .power_off      = exynos5250_power_off,
 370         },
 371         {
 372                 .label          = "host",
 373                 .id             = EXYNOS5250_HOST,
 374                 .power_on       = exynos5250_power_on,
 375                 .power_off      = exynos5250_power_off,
 376         },
 377         {
 378                 .label          = "hsic0",
 379                 .id             = EXYNOS5250_HSIC0,
 380                 .power_on       = exynos5250_power_on,
 381                 .power_off      = exynos5250_power_off,
 382         },
 383         {
 384                 .label          = "hsic1",
 385                 .id             = EXYNOS5250_HSIC1,
 386                 .power_on       = exynos5250_power_on,
 387                 .power_off      = exynos5250_power_off,
 388         },
 389 };
 390
 391 static const struct samsung_usb2_common_phy exynos5420_phys[] = {
 392         {
 393                 .label          = "host",
 394                 .id             = EXYNOS5250_HOST,
 395                 .power_on       = exynos5250_power_on,
 396                 .power_off      = exynos5250_power_off,
 397         },
 398         {
 399                 .label          = "hsic",
 400                 .id             = EXYNOS5250_HSIC0,
 401                 .power_on       = exynos5250_power_on,
 402                 .power_off      = exynos5250_power_off,
 403         },
 404 };
 405
 406 const struct samsung_usb2_phy_config exynos5250_usb2_phy_config = {
 407         .has_mode_switch        = 1,
 408         .num_phys               = ARRAY_SIZE(exynos5250_phys),
 409         .phys                   = exynos5250_phys,
 410         .rate_to_clk            = exynos5250_rate_to_clk,
 411 };
 412
 413 const struct samsung_usb2_phy_config exynos5420_usb2_phy_config = {
 414         .has_mode_switch        = 1,
 415         .num_phys               = ARRAY_SIZE(exynos5420_phys),
 416         .phys                   = exynos5420_phys,
 417         .rate_to_clk            = exynos5250_rate_to_clk,
 418 };