1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
4 * Author: Chris Zhong <zyw@rock-chips.com>
5 * Kever Yang <kever.yang@rock-chips.com>
7 * The ROCKCHIP Type-C PHY has two PLL clocks. The first PLL clock
8 * is used for USB3, the second PLL clock is used for DP. This Type-C PHY has
9 * 3 working modes: USB3 only mode, DP only mode, and USB3+DP mode.
10 * At USB3 only mode, both PLL clocks need to be initialized, this allows the
11 * PHY to switch mode between USB3 and USB3+DP, without disconnecting the USB
13 * In The DP only mode, only the DP PLL needs to be powered on, and the 4 lanes
14 * are all used for DP.
16 * This driver gets extcon cable state and property, then decides which mode to
20 * EXTCON_USB or EXTCON_USB_HOST state is true, and
21 * EXTCON_PROP_USB_SS property is true.
22 * EXTCON_DISP_DP state is false.
25 * EXTCON_DISP_DP state is true, and
26 * EXTCON_PROP_USB_SS property is false.
27 * If EXTCON_USB_HOST state is true, it is DP + USB2 mode, since the USB2 phy
28 * is a separate phy, so this case is still DP only mode.
31 * EXTCON_USB_HOST and EXTCON_DISP_DP are both true, and
32 * EXTCON_PROP_USB_SS property is true.
34 * This Type-C PHY driver supports normal and flip orientation. The orientation
35 * is reported by the EXTCON_PROP_USB_TYPEC_POLARITY property: true is flip
36 * orientation, false is normal orientation.
39 #include <linux/clk.h>
40 #include <linux/clk-provider.h>
41 #include <linux/delay.h>
42 #include <linux/extcon.h>
44 #include <linux/iopoll.h>
45 #include <linux/kernel.h>
46 #include <linux/module.h>
47 #include <linux/mutex.h>
49 #include <linux/of_address.h>
50 #include <linux/of_platform.h>
51 #include <linux/platform_device.h>
52 #include <linux/regmap.h>
53 #include <linux/reset.h>
55 #include <linux/mfd/syscon.h>
56 #include <linux/phy/phy.h>
58 #define CMN_SSM_BANDGAP (0x21 << 2)
59 #define CMN_SSM_BIAS (0x22 << 2)
60 #define CMN_PLLSM0_PLLEN (0x29 << 2)
61 #define CMN_PLLSM0_PLLPRE (0x2a << 2)
62 #define CMN_PLLSM0_PLLVREF (0x2b << 2)
63 #define CMN_PLLSM0_PLLLOCK (0x2c << 2)
64 #define CMN_PLLSM1_PLLEN (0x31 << 2)
65 #define CMN_PLLSM1_PLLPRE (0x32 << 2)
66 #define CMN_PLLSM1_PLLVREF (0x33 << 2)
67 #define CMN_PLLSM1_PLLLOCK (0x34 << 2)
68 #define CMN_PLLSM1_USER_DEF_CTRL (0x37 << 2)
69 #define CMN_ICAL_OVRD (0xc1 << 2)
70 #define CMN_PLL0_VCOCAL_OVRD (0x83 << 2)
71 #define CMN_PLL0_VCOCAL_INIT (0x84 << 2)
72 #define CMN_PLL0_VCOCAL_ITER (0x85 << 2)
73 #define CMN_PLL0_LOCK_REFCNT_START (0x90 << 2)
74 #define CMN_PLL0_LOCK_PLLCNT_START (0x92 << 2)
75 #define CMN_PLL0_LOCK_PLLCNT_THR (0x93 << 2)
76 #define CMN_PLL0_INTDIV (0x94 << 2)
77 #define CMN_PLL0_FRACDIV (0x95 << 2)
78 #define CMN_PLL0_HIGH_THR (0x96 << 2)
79 #define CMN_PLL0_DSM_DIAG (0x97 << 2)
80 #define CMN_PLL0_SS_CTRL1 (0x98 << 2)
81 #define CMN_PLL0_SS_CTRL2 (0x99 << 2)
82 #define CMN_PLL1_VCOCAL_START (0xa1 << 2)
83 #define CMN_PLL1_VCOCAL_OVRD (0xa3 << 2)
84 #define CMN_PLL1_VCOCAL_INIT (0xa4 << 2)
85 #define CMN_PLL1_VCOCAL_ITER (0xa5 << 2)
86 #define CMN_PLL1_LOCK_REFCNT_START (0xb0 << 2)
87 #define CMN_PLL1_LOCK_PLLCNT_START (0xb2 << 2)
88 #define CMN_PLL1_LOCK_PLLCNT_THR (0xb3 << 2)
89 #define CMN_PLL1_INTDIV (0xb4 << 2)
90 #define CMN_PLL1_FRACDIV (0xb5 << 2)
91 #define CMN_PLL1_HIGH_THR (0xb6 << 2)
92 #define CMN_PLL1_DSM_DIAG (0xb7 << 2)
93 #define CMN_PLL1_SS_CTRL1 (0xb8 << 2)
94 #define CMN_PLL1_SS_CTRL2 (0xb9 << 2)
95 #define CMN_RXCAL_OVRD (0xd1 << 2)
97 #define CMN_TXPUCAL_CTRL (0xe0 << 2)
98 #define CMN_TXPUCAL_OVRD (0xe1 << 2)
99 #define CMN_TXPDCAL_CTRL (0xf0 << 2)
100 #define CMN_TXPDCAL_OVRD (0xf1 << 2)
102 /* For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL */
103 #define CMN_TXPXCAL_START BIT(15)
104 #define CMN_TXPXCAL_DONE BIT(14)
105 #define CMN_TXPXCAL_NO_RESPONSE BIT(13)
106 #define CMN_TXPXCAL_CURRENT_RESPONSE BIT(12)
108 #define CMN_TXPU_ADJ_CTRL (0x108 << 2)
109 #define CMN_TXPD_ADJ_CTRL (0x10c << 2)
112 * For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL,
113 * CMN_TXPU_ADJ_CTRL, CMN_TXPDCAL_CTRL
115 * NOTE: some of these registers are documented to be 2's complement
116 * signed numbers, but then documented to be always positive. Weird.
117 * In such a case, using CMN_CALIB_CODE_POS() avoids the unnecessary
120 #define CMN_CALIB_CODE_WIDTH 7
121 #define CMN_CALIB_CODE_OFFSET 0
122 #define CMN_CALIB_CODE_MASK GENMASK(CMN_CALIB_CODE_WIDTH, 0)
123 #define CMN_CALIB_CODE(x) \
124 sign_extend32((x) >> CMN_CALIB_CODE_OFFSET, CMN_CALIB_CODE_WIDTH)
126 #define CMN_CALIB_CODE_POS_MASK GENMASK(CMN_CALIB_CODE_WIDTH - 1, 0)
127 #define CMN_CALIB_CODE_POS(x) \
128 (((x) >> CMN_CALIB_CODE_OFFSET) & CMN_CALIB_CODE_POS_MASK)
130 #define CMN_DIAG_PLL0_FBH_OVRD (0x1c0 << 2)
131 #define CMN_DIAG_PLL0_FBL_OVRD (0x1c1 << 2)
132 #define CMN_DIAG_PLL0_OVRD (0x1c2 << 2)
133 #define CMN_DIAG_PLL0_V2I_TUNE (0x1c5 << 2)
134 #define CMN_DIAG_PLL0_CP_TUNE (0x1c6 << 2)
135 #define CMN_DIAG_PLL0_LF_PROG (0x1c7 << 2)
136 #define CMN_DIAG_PLL1_FBH_OVRD (0x1d0 << 2)
137 #define CMN_DIAG_PLL1_FBL_OVRD (0x1d1 << 2)
138 #define CMN_DIAG_PLL1_OVRD (0x1d2 << 2)
139 #define CMN_DIAG_PLL1_V2I_TUNE (0x1d5 << 2)
140 #define CMN_DIAG_PLL1_CP_TUNE (0x1d6 << 2)
141 #define CMN_DIAG_PLL1_LF_PROG (0x1d7 << 2)
142 #define CMN_DIAG_PLL1_PTATIS_TUNE1 (0x1d8 << 2)
143 #define CMN_DIAG_PLL1_PTATIS_TUNE2 (0x1d9 << 2)
144 #define CMN_DIAG_PLL1_INCLK_CTRL (0x1da << 2)
145 #define CMN_DIAG_HSCLK_SEL (0x1e0 << 2)
147 #define XCVR_PSM_RCTRL(n) ((0x4001 | ((n) << 9)) << 2)
148 #define XCVR_PSM_CAL_TMR(n) ((0x4002 | ((n) << 9)) << 2)
149 #define XCVR_PSM_A0IN_TMR(n) ((0x4003 | ((n) << 9)) << 2)
150 #define TX_TXCC_CAL_SCLR_MULT(n) ((0x4047 | ((n) << 9)) << 2)
151 #define TX_TXCC_CPOST_MULT_00(n) ((0x404c | ((n) << 9)) << 2)
152 #define TX_TXCC_CPOST_MULT_01(n) ((0x404d | ((n) << 9)) << 2)
153 #define TX_TXCC_CPOST_MULT_10(n) ((0x404e | ((n) << 9)) << 2)
154 #define TX_TXCC_CPOST_MULT_11(n) ((0x404f | ((n) << 9)) << 2)
155 #define TX_TXCC_MGNFS_MULT_000(n) ((0x4050 | ((n) << 9)) << 2)
156 #define TX_TXCC_MGNFS_MULT_001(n) ((0x4051 | ((n) << 9)) << 2)
157 #define TX_TXCC_MGNFS_MULT_010(n) ((0x4052 | ((n) << 9)) << 2)
158 #define TX_TXCC_MGNFS_MULT_011(n) ((0x4053 | ((n) << 9)) << 2)
159 #define TX_TXCC_MGNFS_MULT_100(n) ((0x4054 | ((n) << 9)) << 2)
160 #define TX_TXCC_MGNFS_MULT_101(n) ((0x4055 | ((n) << 9)) << 2)
161 #define TX_TXCC_MGNFS_MULT_110(n) ((0x4056 | ((n) << 9)) << 2)
162 #define TX_TXCC_MGNFS_MULT_111(n) ((0x4057 | ((n) << 9)) << 2)
163 #define TX_TXCC_MGNLS_MULT_000(n) ((0x4058 | ((n) << 9)) << 2)
164 #define TX_TXCC_MGNLS_MULT_001(n) ((0x4059 | ((n) << 9)) << 2)
165 #define TX_TXCC_MGNLS_MULT_010(n) ((0x405a | ((n) << 9)) << 2)
166 #define TX_TXCC_MGNLS_MULT_011(n) ((0x405b | ((n) << 9)) << 2)
167 #define TX_TXCC_MGNLS_MULT_100(n) ((0x405c | ((n) << 9)) << 2)
168 #define TX_TXCC_MGNLS_MULT_101(n) ((0x405d | ((n) << 9)) << 2)
169 #define TX_TXCC_MGNLS_MULT_110(n) ((0x405e | ((n) << 9)) << 2)
170 #define TX_TXCC_MGNLS_MULT_111(n) ((0x405f | ((n) << 9)) << 2)
172 #define XCVR_DIAG_PLLDRC_CTRL(n) ((0x40e0 | ((n) << 9)) << 2)
173 #define XCVR_DIAG_BIDI_CTRL(n) ((0x40e8 | ((n) << 9)) << 2)
174 #define XCVR_DIAG_LANE_FCM_EN_MGN(n) ((0x40f2 | ((n) << 9)) << 2)
175 #define TX_PSC_A0(n) ((0x4100 | ((n) << 9)) << 2)
176 #define TX_PSC_A1(n) ((0x4101 | ((n) << 9)) << 2)
177 #define TX_PSC_A2(n) ((0x4102 | ((n) << 9)) << 2)
178 #define TX_PSC_A3(n) ((0x4103 | ((n) << 9)) << 2)
179 #define TX_RCVDET_CTRL(n) ((0x4120 | ((n) << 9)) << 2)
180 #define TX_RCVDET_EN_TMR(n) ((0x4122 | ((n) << 9)) << 2)
181 #define TX_RCVDET_ST_TMR(n) ((0x4123 | ((n) << 9)) << 2)
182 #define TX_DIAG_TX_DRV(n) ((0x41e1 | ((n) << 9)) << 2)
183 #define TX_DIAG_BGREF_PREDRV_DELAY (0x41e7 << 2)
185 /* Use this for "n" in macros like "_MULT_XXX" to target the aux channel */
186 #define AUX_CH_LANE 8
188 #define TX_ANA_CTRL_REG_1 (0x5020 << 2)
190 #define TXDA_DP_AUX_EN BIT(15)
191 #define AUXDA_SE_EN BIT(14)
192 #define TXDA_CAL_LATCH_EN BIT(13)
193 #define AUXDA_POLARITY BIT(12)
194 #define TXDA_DRV_POWER_ISOLATION_EN BIT(11)
195 #define TXDA_DRV_POWER_EN_PH_2_N BIT(10)
196 #define TXDA_DRV_POWER_EN_PH_1_N BIT(9)
197 #define TXDA_BGREF_EN BIT(8)
198 #define TXDA_DRV_LDO_EN BIT(7)
199 #define TXDA_DECAP_EN_DEL BIT(6)
200 #define TXDA_DECAP_EN BIT(5)
201 #define TXDA_UPHY_SUPPLY_EN_DEL BIT(4)
202 #define TXDA_UPHY_SUPPLY_EN BIT(3)
203 #define TXDA_LOW_LEAKAGE_EN BIT(2)
204 #define TXDA_DRV_IDLE_LOWI_EN BIT(1)
205 #define TXDA_DRV_CMN_MODE_EN BIT(0)
207 #define TX_ANA_CTRL_REG_2 (0x5021 << 2)
209 #define AUXDA_DEBOUNCING_CLK BIT(15)
210 #define TXDA_LPBK_RECOVERED_CLK_EN BIT(14)
211 #define TXDA_LPBK_ISI_GEN_EN BIT(13)
212 #define TXDA_LPBK_SERIAL_EN BIT(12)
213 #define TXDA_LPBK_LINE_EN BIT(11)
214 #define TXDA_DRV_LDO_REDC_SINKIQ BIT(10)
215 #define XCVR_DECAP_EN_DEL BIT(9)
216 #define XCVR_DECAP_EN BIT(8)
217 #define TXDA_MPHY_ENABLE_HS_NT BIT(7)
218 #define TXDA_MPHY_SA_MODE BIT(6)
219 #define TXDA_DRV_LDO_RBYR_FB_EN BIT(5)
220 #define TXDA_DRV_RST_PULL_DOWN BIT(4)
221 #define TXDA_DRV_LDO_BG_FB_EN BIT(3)
222 #define TXDA_DRV_LDO_BG_REF_EN BIT(2)
223 #define TXDA_DRV_PREDRV_EN_DEL BIT(1)
224 #define TXDA_DRV_PREDRV_EN BIT(0)
226 #define TXDA_COEFF_CALC_CTRL (0x5022 << 2)
228 #define TX_HIGH_Z BIT(6)
229 #define TX_VMARGIN_OFFSET 3
230 #define TX_VMARGIN_MASK 0x7
231 #define LOW_POWER_SWING_EN BIT(2)
232 #define TX_FCM_DRV_MAIN_EN BIT(1)
233 #define TX_FCM_FULL_MARGIN BIT(0)
235 #define TX_DIG_CTRL_REG_2 (0x5024 << 2)
237 #define TX_HIGH_Z_TM_EN BIT(15)
238 #define TX_RESCAL_CODE_OFFSET 0
239 #define TX_RESCAL_CODE_MASK 0x3f
241 #define TXDA_CYA_AUXDA_CYA (0x5025 << 2)
242 #define TX_ANA_CTRL_REG_3 (0x5026 << 2)
243 #define TX_ANA_CTRL_REG_4 (0x5027 << 2)
244 #define TX_ANA_CTRL_REG_5 (0x5029 << 2)
246 #define RX_PSC_A0(n) ((0x8000 | ((n) << 9)) << 2)
247 #define RX_PSC_A1(n) ((0x8001 | ((n) << 9)) << 2)
248 #define RX_PSC_A2(n) ((0x8002 | ((n) << 9)) << 2)
249 #define RX_PSC_A3(n) ((0x8003 | ((n) << 9)) << 2)
250 #define RX_PSC_CAL(n) ((0x8006 | ((n) << 9)) << 2)
251 #define RX_PSC_RDY(n) ((0x8007 | ((n) << 9)) << 2)
252 #define RX_IQPI_ILL_CAL_OVRD (0x8023 << 2)
253 #define RX_EPI_ILL_CAL_OVRD (0x8033 << 2)
254 #define RX_SDCAL0_OVRD (0x8041 << 2)
255 #define RX_SDCAL1_OVRD (0x8049 << 2)
256 #define RX_SLC_INIT (0x806d << 2)
257 #define RX_SLC_RUN (0x806e << 2)
258 #define RX_CDRLF_CNFG2 (0x8081 << 2)
259 #define RX_SIGDET_HL_FILT_TMR(n) ((0x8090 | ((n) << 9)) << 2)
260 #define RX_SLC_IOP0_OVRD (0x8101 << 2)
261 #define RX_SLC_IOP1_OVRD (0x8105 << 2)
262 #define RX_SLC_QOP0_OVRD (0x8109 << 2)
263 #define RX_SLC_QOP1_OVRD (0x810d << 2)
264 #define RX_SLC_EOP0_OVRD (0x8111 << 2)
265 #define RX_SLC_EOP1_OVRD (0x8115 << 2)
266 #define RX_SLC_ION0_OVRD (0x8119 << 2)
267 #define RX_SLC_ION1_OVRD (0x811d << 2)
268 #define RX_SLC_QON0_OVRD (0x8121 << 2)
269 #define RX_SLC_QON1_OVRD (0x8125 << 2)
270 #define RX_SLC_EON0_OVRD (0x8129 << 2)
271 #define RX_SLC_EON1_OVRD (0x812d << 2)
272 #define RX_SLC_IEP0_OVRD (0x8131 << 2)
273 #define RX_SLC_IEP1_OVRD (0x8135 << 2)
274 #define RX_SLC_QEP0_OVRD (0x8139 << 2)
275 #define RX_SLC_QEP1_OVRD (0x813d << 2)
276 #define RX_SLC_EEP0_OVRD (0x8141 << 2)
277 #define RX_SLC_EEP1_OVRD (0x8145 << 2)
278 #define RX_SLC_IEN0_OVRD (0x8149 << 2)
279 #define RX_SLC_IEN1_OVRD (0x814d << 2)
280 #define RX_SLC_QEN0_OVRD (0x8151 << 2)
281 #define RX_SLC_QEN1_OVRD (0x8155 << 2)
282 #define RX_SLC_EEN0_OVRD (0x8159 << 2)
283 #define RX_SLC_EEN1_OVRD (0x815d << 2)
284 #define RX_REE_CTRL_DATA_MASK(n) ((0x81bb | ((n) << 9)) << 2)
285 #define RX_DIAG_SIGDET_TUNE(n) ((0x81dc | ((n) << 9)) << 2)
286 #define RX_DIAG_SC2C_DELAY (0x81e1 << 2)
288 #define PMA_LANE_CFG (0xc000 << 2)
289 #define PIPE_CMN_CTRL1 (0xc001 << 2)
290 #define PIPE_CMN_CTRL2 (0xc002 << 2)
291 #define PIPE_COM_LOCK_CFG1 (0xc003 << 2)
292 #define PIPE_COM_LOCK_CFG2 (0xc004 << 2)
293 #define PIPE_RCV_DET_INH (0xc005 << 2)
294 #define DP_MODE_CTL (0xc008 << 2)
295 #define DP_CLK_CTL (0xc009 << 2)
296 #define STS (0xc00F << 2)
297 #define PHY_ISO_CMN_CTRL (0xc010 << 2)
298 #define PHY_DP_TX_CTL (0xc408 << 2)
299 #define PMA_CMN_CTRL1 (0xc800 << 2)
300 #define PHY_PMA_ISO_CMN_CTRL (0xc810 << 2)
301 #define PHY_ISOLATION_CTRL (0xc81f << 2)
302 #define PHY_PMA_ISO_XCVR_CTRL(n) ((0xcc11 | ((n) << 6)) << 2)
303 #define PHY_PMA_ISO_LINK_MODE(n) ((0xcc12 | ((n) << 6)) << 2)
304 #define PHY_PMA_ISO_PWRST_CTRL(n) ((0xcc13 | ((n) << 6)) << 2)
305 #define PHY_PMA_ISO_TX_DATA_LO(n) ((0xcc14 | ((n) << 6)) << 2)
306 #define PHY_PMA_ISO_TX_DATA_HI(n) ((0xcc15 | ((n) << 6)) << 2)
307 #define PHY_PMA_ISO_RX_DATA_LO(n) ((0xcc16 | ((n) << 6)) << 2)
308 #define PHY_PMA_ISO_RX_DATA_HI(n) ((0xcc17 | ((n) << 6)) << 2)
309 #define TX_BIST_CTRL(n) ((0x4140 | ((n) << 9)) << 2)
310 #define TX_BIST_UDDWR(n) ((0x4141 | ((n) << 9)) << 2)
313 * Selects which PLL clock will be driven on the analog high speed
314 * clock 0: PLL 0 div 1
315 * clock 1: PLL 1 div 2
317 #define CLK_PLL_CONFIG 0X30
318 #define CLK_PLL_MASK 0x33
320 #define CMN_READY BIT(0)
322 #define DP_PLL_CLOCK_ENABLE BIT(2)
323 #define DP_PLL_ENABLE BIT(0)
324 #define DP_PLL_DATA_RATE_RBR ((2 << 12) | (4 << 8))
325 #define DP_PLL_DATA_RATE_HBR ((2 << 12) | (4 << 8))
326 #define DP_PLL_DATA_RATE_HBR2 ((1 << 12) | (2 << 8))
328 #define DP_MODE_A0 BIT(4)
329 #define DP_MODE_A2 BIT(6)
330 #define DP_MODE_ENTER_A0 0xc101
331 #define DP_MODE_ENTER_A2 0xc104
333 #define PHY_MODE_SET_TIMEOUT 100000
335 #define PIN_ASSIGN_C_E 0x51d9
336 #define PIN_ASSIGN_D_F 0x5100
338 #define MODE_DISCONNECT 0
339 #define MODE_UFP_USB BIT(0)
340 #define MODE_DFP_USB BIT(1)
341 #define MODE_DFP_DP BIT(2)
350 * struct rockchip_usb3phy_port_cfg - usb3-phy port configuration.
351 * @reg: the base address for usb3-phy config.
352 * @typec_conn_dir: the register of type-c connector direction.
353 * @usb3tousb2_en: the register of type-c force usb2 to usb2 enable.
354 * @external_psm: the register of type-c phy external psm clock.
355 * @pipe_status: the register of type-c phy pipe status.
356 * @usb3_host_disable: the register of type-c usb3 host disable.
357 * @usb3_host_port: the register of type-c usb3 host port.
358 * @uphy_dp_sel: the register of type-c phy DP select control.
360 struct rockchip_usb3phy_port_cfg {
362 struct usb3phy_reg typec_conn_dir;
363 struct usb3phy_reg usb3tousb2_en;
364 struct usb3phy_reg external_psm;
365 struct usb3phy_reg pipe_status;
366 struct usb3phy_reg usb3_host_disable;
367 struct usb3phy_reg usb3_host_port;
368 struct usb3phy_reg uphy_dp_sel;
371 struct rockchip_typec_phy {
374 struct extcon_dev *extcon;
375 struct regmap *grf_regs;
376 struct clk *clk_core;
378 struct reset_control *uphy_rst;
379 struct reset_control *pipe_rst;
380 struct reset_control *tcphy_rst;
381 const struct rockchip_usb3phy_port_cfg *port_cfgs;
382 /* mutex to protect access to individual PHYs */
394 static struct phy_reg usb3_pll_cfg[] = {
395 { 0xf0, CMN_PLL0_VCOCAL_INIT },
396 { 0x18, CMN_PLL0_VCOCAL_ITER },
397 { 0xd0, CMN_PLL0_INTDIV },
398 { 0x4a4a, CMN_PLL0_FRACDIV },
399 { 0x34, CMN_PLL0_HIGH_THR },
400 { 0x1ee, CMN_PLL0_SS_CTRL1 },
401 { 0x7f03, CMN_PLL0_SS_CTRL2 },
402 { 0x20, CMN_PLL0_DSM_DIAG },
403 { 0, CMN_DIAG_PLL0_OVRD },
404 { 0, CMN_DIAG_PLL0_FBH_OVRD },
405 { 0, CMN_DIAG_PLL0_FBL_OVRD },
406 { 0x7, CMN_DIAG_PLL0_V2I_TUNE },
407 { 0x45, CMN_DIAG_PLL0_CP_TUNE },
408 { 0x8, CMN_DIAG_PLL0_LF_PROG },
411 static struct phy_reg dp_pll_cfg[] = {
412 { 0xf0, CMN_PLL1_VCOCAL_INIT },
413 { 0x18, CMN_PLL1_VCOCAL_ITER },
414 { 0x30b9, CMN_PLL1_VCOCAL_START },
415 { 0x21c, CMN_PLL1_INTDIV },
416 { 0, CMN_PLL1_FRACDIV },
417 { 0x5, CMN_PLL1_HIGH_THR },
418 { 0x35, CMN_PLL1_SS_CTRL1 },
419 { 0x7f1e, CMN_PLL1_SS_CTRL2 },
420 { 0x20, CMN_PLL1_DSM_DIAG },
421 { 0, CMN_PLLSM1_USER_DEF_CTRL },
422 { 0, CMN_DIAG_PLL1_OVRD },
423 { 0, CMN_DIAG_PLL1_FBH_OVRD },
424 { 0, CMN_DIAG_PLL1_FBL_OVRD },
425 { 0x6, CMN_DIAG_PLL1_V2I_TUNE },
426 { 0x45, CMN_DIAG_PLL1_CP_TUNE },
427 { 0x8, CMN_DIAG_PLL1_LF_PROG },
428 { 0x100, CMN_DIAG_PLL1_PTATIS_TUNE1 },
429 { 0x7, CMN_DIAG_PLL1_PTATIS_TUNE2 },
430 { 0x4, CMN_DIAG_PLL1_INCLK_CTRL },
433 static const struct rockchip_usb3phy_port_cfg rk3399_usb3phy_port_cfgs[] = {
436 .typec_conn_dir = { 0xe580, 0, 16 },
437 .usb3tousb2_en = { 0xe580, 3, 19 },
438 .external_psm = { 0xe588, 14, 30 },
439 .pipe_status = { 0xe5c0, 0, 0 },
440 .usb3_host_disable = { 0x2434, 0, 16 },
441 .usb3_host_port = { 0x2434, 12, 28 },
442 .uphy_dp_sel = { 0x6268, 19, 19 },
446 .typec_conn_dir = { 0xe58c, 0, 16 },
447 .usb3tousb2_en = { 0xe58c, 3, 19 },
448 .external_psm = { 0xe594, 14, 30 },
449 .pipe_status = { 0xe5c0, 16, 16 },
450 .usb3_host_disable = { 0x2444, 0, 16 },
451 .usb3_host_port = { 0x2444, 12, 28 },
452 .uphy_dp_sel = { 0x6268, 3, 19 },
457 static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy)
462 * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
463 * cmn_psm_clk_dig_div = 2, set the clk division to 2
465 writel(0x830, tcphy->base + PMA_CMN_CTRL1);
466 for (i = 0; i < 4; i++) {
468 * The following PHY configuration assumes a 24 MHz reference
471 writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
472 writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
473 writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
476 rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
477 rdata &= ~CLK_PLL_MASK;
478 rdata |= CLK_PLL_CONFIG;
479 writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
482 static void tcphy_cfg_usb3_pll(struct rockchip_typec_phy *tcphy)
486 /* load the configuration of PLL0 */
487 for (i = 0; i < ARRAY_SIZE(usb3_pll_cfg); i++)
488 writel(usb3_pll_cfg[i].value,
489 tcphy->base + usb3_pll_cfg[i].addr);
492 static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy)
496 /* set the default mode to RBR */
497 writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR,
498 tcphy->base + DP_CLK_CTL);
500 /* load the configuration of PLL1 */
501 for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++)
502 writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr);
505 static void tcphy_tx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
507 writel(0x7799, tcphy->base + TX_PSC_A0(lane));
508 writel(0x7798, tcphy->base + TX_PSC_A1(lane));
509 writel(0x5098, tcphy->base + TX_PSC_A2(lane));
510 writel(0x5098, tcphy->base + TX_PSC_A3(lane));
511 writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
512 writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
515 static void tcphy_rx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
517 writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
518 writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
519 writel(0xa410, tcphy->base + RX_PSC_A2(lane));
520 writel(0x2410, tcphy->base + RX_PSC_A3(lane));
521 writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
522 writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
523 writel(0x03e7, tcphy->base + RX_REE_CTRL_DATA_MASK(lane));
524 writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
525 writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
526 writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
529 static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
533 writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane));
534 writel(0x6799, tcphy->base + TX_PSC_A0(lane));
535 writel(0x6798, tcphy->base + TX_PSC_A1(lane));
536 writel(0x98, tcphy->base + TX_PSC_A2(lane));
537 writel(0x98, tcphy->base + TX_PSC_A3(lane));
539 writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
540 writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane));
541 writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane));
542 writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane));
543 writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane));
544 writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane));
545 writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane));
546 writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane));
547 writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane));
548 writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane));
549 writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane));
550 writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane));
552 writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane));
553 writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane));
555 rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
556 rdata = (rdata & 0x8fff) | 0x6000;
557 writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
560 static inline int property_enable(struct rockchip_typec_phy *tcphy,
561 const struct usb3phy_reg *reg, bool en)
563 u32 mask = 1 << reg->write_enable;
564 u32 val = en << reg->enable_bit;
566 return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
569 static void tcphy_dp_aux_set_flip(struct rockchip_typec_phy *tcphy)
571 u16 tx_ana_ctrl_reg_1;
574 * Select the polarity of the xcvr:
575 * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
577 * 0, Normal polarity (if TYPEC, pulls up aux_m and pulls down
580 tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
582 tx_ana_ctrl_reg_1 |= AUXDA_POLARITY;
584 tx_ana_ctrl_reg_1 &= ~AUXDA_POLARITY;
585 writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
588 static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
591 u16 tx_ana_ctrl_reg_1;
592 u16 tx_ana_ctrl_reg_2;
593 s32 pu_calib_code, pd_calib_code;
598 * Calculate calibration code as per docs: use an average of the
599 * pull down and pull up. Then add in adjustments.
601 val = readl(tcphy->base + CMN_TXPUCAL_CTRL);
602 pu_calib_code = CMN_CALIB_CODE_POS(val);
603 val = readl(tcphy->base + CMN_TXPDCAL_CTRL);
604 pd_calib_code = CMN_CALIB_CODE_POS(val);
605 val = readl(tcphy->base + CMN_TXPU_ADJ_CTRL);
606 pu_adj = CMN_CALIB_CODE(val);
607 val = readl(tcphy->base + CMN_TXPD_ADJ_CTRL);
608 pd_adj = CMN_CALIB_CODE(val);
609 calib = (pu_calib_code + pd_calib_code) / 2 + pu_adj + pd_adj;
611 /* disable txda_cal_latch_en for rewrite the calibration values */
612 tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
613 tx_ana_ctrl_reg_1 &= ~TXDA_CAL_LATCH_EN;
614 writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
616 /* write the calibration, then delay 10 ms as sample in docs */
617 val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
618 val &= ~(TX_RESCAL_CODE_MASK << TX_RESCAL_CODE_OFFSET);
619 val |= calib << TX_RESCAL_CODE_OFFSET;
620 writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
621 usleep_range(10000, 10050);
624 * Enable signal for latch that sample and holds calibration values.
625 * Activate this signal for 1 clock cycle to sample new calibration
628 tx_ana_ctrl_reg_1 |= TXDA_CAL_LATCH_EN;
629 writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
630 usleep_range(150, 200);
632 /* set TX Voltage Level and TX Deemphasis to 0 */
633 writel(0, tcphy->base + PHY_DP_TX_CTL);
635 /* re-enable decap */
636 tx_ana_ctrl_reg_2 = XCVR_DECAP_EN;
637 writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
639 tx_ana_ctrl_reg_2 |= XCVR_DECAP_EN_DEL;
640 writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
642 writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
644 tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN;
645 writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
647 tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN_DEL;
648 writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
650 writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
653 * Programs txda_drv_ldo_prog[15:0], Sets driver LDO
654 * voltage 16'h1001 for DP-AUX-TX and RX
656 writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
658 /* re-enables Bandgap reference for LDO */
659 tx_ana_ctrl_reg_1 |= TXDA_DRV_LDO_EN;
660 writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
662 tx_ana_ctrl_reg_1 |= TXDA_BGREF_EN;
663 writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
666 * re-enables the transmitter pre-driver, driver data selection MUX,
667 * and receiver detect circuits.
669 tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN;
670 writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
672 tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN_DEL;
673 writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
676 * Do all the undocumented magic:
677 * - Turn on TXDA_DP_AUX_EN, whatever that is, even though sample
678 * never shows this going on.
679 * - Turn on TXDA_DECAP_EN (and TXDA_DECAP_EN_DEL) even though
680 * docs say for aux it's always 0.
681 * - Turn off the LDO and BGREF, which we just spent time turning
684 * Without this magic, things seem worse.
686 tx_ana_ctrl_reg_1 |= TXDA_DP_AUX_EN;
687 tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN;
688 tx_ana_ctrl_reg_1 &= ~TXDA_DRV_LDO_EN;
689 tx_ana_ctrl_reg_1 &= ~TXDA_BGREF_EN;
690 writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
692 tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN_DEL;
693 writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
696 * Undo the work we did to set the LDO voltage.
697 * This doesn't seem to help nor hurt, but it kinda goes with the
698 * undocumented magic above.
700 writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
702 /* Don't set voltage swing to 400 mV peak to peak (differential) */
703 writel(0, tcphy->base + TXDA_COEFF_CALC_CTRL);
705 /* Init TXDA_CYA_AUXDA_CYA for unknown magic reasons */
706 writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
709 * More undocumented magic, presumably the goal of which is to
710 * make the "auxda_source_aux_oen" be ignored and instead to decide
711 * about "high impedance state" based on what software puts in the
712 * register TXDA_COEFF_CALC_CTRL (see TX_HIGH_Z). Since we only
713 * program that register once and we don't set the bit TX_HIGH_Z,
714 * presumably the goal here is that we should never put the analog
715 * driver in high impedance state.
717 val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
718 val |= TX_HIGH_Z_TM_EN;
719 writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
722 static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
724 const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
728 ret = clk_prepare_enable(tcphy->clk_core);
730 dev_err(tcphy->dev, "Failed to prepare_enable core clock\n");
734 ret = clk_prepare_enable(tcphy->clk_ref);
736 dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n");
740 reset_control_deassert(tcphy->tcphy_rst);
742 property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
743 tcphy_dp_aux_set_flip(tcphy);
745 tcphy_cfg_24m(tcphy);
747 if (mode == MODE_DFP_DP) {
748 tcphy_cfg_dp_pll(tcphy);
749 for (i = 0; i < 4; i++)
750 tcphy_dp_cfg_lane(tcphy, i);
752 writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG);
754 tcphy_cfg_usb3_pll(tcphy);
755 tcphy_cfg_dp_pll(tcphy);
757 tcphy_tx_usb3_cfg_lane(tcphy, 3);
758 tcphy_rx_usb3_cfg_lane(tcphy, 2);
759 tcphy_dp_cfg_lane(tcphy, 0);
760 tcphy_dp_cfg_lane(tcphy, 1);
762 tcphy_tx_usb3_cfg_lane(tcphy, 0);
763 tcphy_rx_usb3_cfg_lane(tcphy, 1);
764 tcphy_dp_cfg_lane(tcphy, 2);
765 tcphy_dp_cfg_lane(tcphy, 3);
768 writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG);
771 writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
773 reset_control_deassert(tcphy->uphy_rst);
775 ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1,
776 val, val & CMN_READY, 10,
777 PHY_MODE_SET_TIMEOUT);
779 dev_err(tcphy->dev, "wait pma ready timeout\n");
784 reset_control_deassert(tcphy->pipe_rst);
789 reset_control_assert(tcphy->uphy_rst);
790 reset_control_assert(tcphy->tcphy_rst);
791 clk_disable_unprepare(tcphy->clk_ref);
793 clk_disable_unprepare(tcphy->clk_core);
797 static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
799 reset_control_assert(tcphy->tcphy_rst);
800 reset_control_assert(tcphy->uphy_rst);
801 reset_control_assert(tcphy->pipe_rst);
802 clk_disable_unprepare(tcphy->clk_core);
803 clk_disable_unprepare(tcphy->clk_ref);
806 static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
808 struct extcon_dev *edev = tcphy->extcon;
809 union extcon_property_value property;
817 ufp = extcon_get_state(edev, EXTCON_USB);
818 dp = extcon_get_state(edev, EXTCON_DISP_DP);
821 id = EXTCON_USB_HOST;
830 ret = extcon_get_property(edev, id, EXTCON_PROP_USB_SS,
833 dev_err(tcphy->dev, "get superspeed property failed\n");
838 mode |= MODE_DFP_USB;
841 ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY,
844 dev_err(tcphy->dev, "get polarity property failed\n");
848 tcphy->flip = property.intval ? 1 : 0;
853 static int tcphy_cfg_usb3_to_usb2_only(struct rockchip_typec_phy *tcphy,
856 const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
858 property_enable(tcphy, &cfg->usb3tousb2_en, value);
859 property_enable(tcphy, &cfg->usb3_host_disable, value);
860 property_enable(tcphy, &cfg->usb3_host_port, !value);
865 static int rockchip_usb3_phy_power_on(struct phy *phy)
867 struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
868 const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
869 const struct usb3phy_reg *reg = &cfg->pipe_status;
870 int timeout, new_mode, ret = 0;
873 mutex_lock(&tcphy->lock);
875 new_mode = tcphy_get_mode(tcphy);
881 /* DP-only mode; fall back to USB2 */
882 if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB))) {
883 tcphy_cfg_usb3_to_usb2_only(tcphy, true);
887 if (tcphy->mode == new_mode)
890 if (tcphy->mode == MODE_DISCONNECT) {
891 ret = tcphy_phy_init(tcphy, new_mode);
896 /* wait TCPHY for pipe ready */
897 for (timeout = 0; timeout < 100; timeout++) {
898 regmap_read(tcphy->grf_regs, reg->offset, &val);
899 if (!(val & BIT(reg->enable_bit))) {
900 tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB);
902 /* enable usb3 host */
903 tcphy_cfg_usb3_to_usb2_only(tcphy, false);
906 usleep_range(10, 20);
909 if (tcphy->mode == MODE_DISCONNECT)
910 tcphy_phy_deinit(tcphy);
915 mutex_unlock(&tcphy->lock);
919 static int rockchip_usb3_phy_power_off(struct phy *phy)
921 struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
923 mutex_lock(&tcphy->lock);
924 tcphy_cfg_usb3_to_usb2_only(tcphy, false);
926 if (tcphy->mode == MODE_DISCONNECT)
929 tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB);
930 if (tcphy->mode == MODE_DISCONNECT)
931 tcphy_phy_deinit(tcphy);
934 mutex_unlock(&tcphy->lock);
938 static const struct phy_ops rockchip_usb3_phy_ops = {
939 .power_on = rockchip_usb3_phy_power_on,
940 .power_off = rockchip_usb3_phy_power_off,
941 .owner = THIS_MODULE,
944 static int rockchip_dp_phy_power_on(struct phy *phy)
946 struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
947 const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
948 int new_mode, ret = 0;
951 mutex_lock(&tcphy->lock);
953 new_mode = tcphy_get_mode(tcphy);
959 if (!(new_mode & MODE_DFP_DP)) {
964 if (tcphy->mode == new_mode)
968 * If the PHY has been power on, but the mode is not DP only mode,
969 * re-init the PHY for setting all of 4 lanes to DP.
971 if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) {
972 tcphy_phy_deinit(tcphy);
973 ret = tcphy_phy_init(tcphy, new_mode);
974 } else if (tcphy->mode == MODE_DISCONNECT) {
975 ret = tcphy_phy_init(tcphy, new_mode);
980 property_enable(tcphy, &cfg->uphy_dp_sel, 1);
982 ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
983 val, val & DP_MODE_A2, 1000,
984 PHY_MODE_SET_TIMEOUT);
986 dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n");
987 goto power_on_finish;
990 tcphy_dp_aux_calibration(tcphy);
992 writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL);
994 ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
995 val, val & DP_MODE_A0, 1000,
996 PHY_MODE_SET_TIMEOUT);
998 writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
999 dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n");
1000 goto power_on_finish;
1003 tcphy->mode |= MODE_DFP_DP;
1006 if (tcphy->mode == MODE_DISCONNECT)
1007 tcphy_phy_deinit(tcphy);
1009 mutex_unlock(&tcphy->lock);
1013 static int rockchip_dp_phy_power_off(struct phy *phy)
1015 struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
1017 mutex_lock(&tcphy->lock);
1019 if (tcphy->mode == MODE_DISCONNECT)
1022 tcphy->mode &= ~MODE_DFP_DP;
1024 writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
1026 if (tcphy->mode == MODE_DISCONNECT)
1027 tcphy_phy_deinit(tcphy);
1030 mutex_unlock(&tcphy->lock);
1034 static const struct phy_ops rockchip_dp_phy_ops = {
1035 .power_on = rockchip_dp_phy_power_on,
1036 .power_off = rockchip_dp_phy_power_off,
1037 .owner = THIS_MODULE,
1040 static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
1043 tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
1045 if (IS_ERR(tcphy->grf_regs)) {
1046 dev_err(dev, "could not find grf dt node\n");
1047 return PTR_ERR(tcphy->grf_regs);
1050 tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
1051 if (IS_ERR(tcphy->clk_core)) {
1052 dev_err(dev, "could not get uphy core clock\n");
1053 return PTR_ERR(tcphy->clk_core);
1056 tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref");
1057 if (IS_ERR(tcphy->clk_ref)) {
1058 dev_err(dev, "could not get uphy ref clock\n");
1059 return PTR_ERR(tcphy->clk_ref);
1062 tcphy->uphy_rst = devm_reset_control_get(dev, "uphy");
1063 if (IS_ERR(tcphy->uphy_rst)) {
1064 dev_err(dev, "no uphy_rst reset control found\n");
1065 return PTR_ERR(tcphy->uphy_rst);
1068 tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe");
1069 if (IS_ERR(tcphy->pipe_rst)) {
1070 dev_err(dev, "no pipe_rst reset control found\n");
1071 return PTR_ERR(tcphy->pipe_rst);
1074 tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy");
1075 if (IS_ERR(tcphy->tcphy_rst)) {
1076 dev_err(dev, "no tcphy_rst reset control found\n");
1077 return PTR_ERR(tcphy->tcphy_rst);
1083 static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy)
1085 const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
1087 reset_control_assert(tcphy->tcphy_rst);
1088 reset_control_assert(tcphy->uphy_rst);
1089 reset_control_assert(tcphy->pipe_rst);
1091 /* select external psm clock */
1092 property_enable(tcphy, &cfg->external_psm, 1);
1093 property_enable(tcphy, &cfg->usb3tousb2_en, 0);
1095 tcphy->mode = MODE_DISCONNECT;
1098 static int rockchip_typec_phy_probe(struct platform_device *pdev)
1100 struct device *dev = &pdev->dev;
1101 struct device_node *np = dev->of_node;
1102 struct device_node *child_np;
1103 struct rockchip_typec_phy *tcphy;
1104 struct phy_provider *phy_provider;
1105 struct resource *res;
1106 const struct rockchip_usb3phy_port_cfg *phy_cfgs;
1109 tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
1113 phy_cfgs = of_device_get_match_data(dev);
1115 dev_err(dev, "phy configs are not assigned!\n");
1119 tcphy->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
1120 if (IS_ERR(tcphy->base))
1121 return PTR_ERR(tcphy->base);
1123 /* find out a proper config which can be matched with dt. */
1125 while (phy_cfgs[index].reg) {
1126 if (phy_cfgs[index].reg == res->start) {
1127 tcphy->port_cfgs = &phy_cfgs[index];
1134 if (!tcphy->port_cfgs) {
1135 dev_err(dev, "no phy-config can be matched with %pOFn node\n",
1140 ret = tcphy_parse_dt(tcphy, dev);
1145 platform_set_drvdata(pdev, tcphy);
1146 mutex_init(&tcphy->lock);
1148 typec_phy_pre_init(tcphy);
1150 tcphy->extcon = extcon_get_edev_by_phandle(dev, 0);
1151 if (IS_ERR(tcphy->extcon)) {
1152 if (PTR_ERR(tcphy->extcon) == -ENODEV) {
1153 tcphy->extcon = NULL;
1155 if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
1156 dev_err(dev, "Invalid or missing extcon\n");
1157 return PTR_ERR(tcphy->extcon);
1161 pm_runtime_enable(dev);
1163 for_each_available_child_of_node(np, child_np) {
1166 if (of_node_name_eq(child_np, "dp-port"))
1167 phy = devm_phy_create(dev, child_np,
1168 &rockchip_dp_phy_ops);
1169 else if (of_node_name_eq(child_np, "usb3-port"))
1170 phy = devm_phy_create(dev, child_np,
1171 &rockchip_usb3_phy_ops);
1176 dev_err(dev, "failed to create phy: %pOFn\n",
1178 pm_runtime_disable(dev);
1179 of_node_put(child_np);
1180 return PTR_ERR(phy);
1183 phy_set_drvdata(phy, tcphy);
1186 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
1187 if (IS_ERR(phy_provider)) {
1188 dev_err(dev, "Failed to register phy provider\n");
1189 pm_runtime_disable(dev);
1190 return PTR_ERR(phy_provider);
1196 static void rockchip_typec_phy_remove(struct platform_device *pdev)
1198 pm_runtime_disable(&pdev->dev);
1201 static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
1203 .compatible = "rockchip,rk3399-typec-phy",
1204 .data = &rk3399_usb3phy_port_cfgs
1209 MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
1211 static struct platform_driver rockchip_typec_phy_driver = {
1212 .probe = rockchip_typec_phy_probe,
1213 .remove_new = rockchip_typec_phy_remove,
1215 .name = "rockchip-typec-phy",
1216 .of_match_table = rockchip_typec_phy_dt_ids,
1220 module_platform_driver(rockchip_typec_phy_driver);
1222 MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
1223 MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>");
1224 MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver");
1225 MODULE_LICENSE("GPL v2");