1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (c) 2014, The Linux Foundation. All rights reserved.
7 #include <linux/iopoll.h>
8 #include <linux/kernel.h>
9 #include <linux/module.h>
11 #include <linux/time.h>
12 #include <linux/delay.h>
13 #include <linux/clk.h>
14 #include <linux/slab.h>
15 #include <linux/platform_device.h>
16 #include <linux/phy/phy.h>
19 #define UNIPHY_PLL_REFCLK_CFG 0x000
20 #define UNIPHY_PLL_PWRGEN_CFG 0x014
21 #define UNIPHY_PLL_GLB_CFG 0x020
22 #define UNIPHY_PLL_SDM_CFG0 0x038
23 #define UNIPHY_PLL_SDM_CFG1 0x03C
24 #define UNIPHY_PLL_SDM_CFG2 0x040
25 #define UNIPHY_PLL_SDM_CFG3 0x044
26 #define UNIPHY_PLL_SDM_CFG4 0x048
27 #define UNIPHY_PLL_SSC_CFG0 0x04C
28 #define UNIPHY_PLL_SSC_CFG1 0x050
29 #define UNIPHY_PLL_SSC_CFG2 0x054
30 #define UNIPHY_PLL_SSC_CFG3 0x058
31 #define UNIPHY_PLL_LKDET_CFG0 0x05C
32 #define UNIPHY_PLL_LKDET_CFG1 0x060
33 #define UNIPHY_PLL_LKDET_CFG2 0x064
34 #define UNIPHY_PLL_CAL_CFG0 0x06C
35 #define UNIPHY_PLL_CAL_CFG8 0x08C
36 #define UNIPHY_PLL_CAL_CFG9 0x090
37 #define UNIPHY_PLL_CAL_CFG10 0x094
38 #define UNIPHY_PLL_CAL_CFG11 0x098
39 #define UNIPHY_PLL_STATUS 0x0C0
41 #define SATA_PHY_SER_CTRL 0x100
42 #define SATA_PHY_TX_DRIV_CTRL0 0x104
43 #define SATA_PHY_TX_DRIV_CTRL1 0x108
44 #define SATA_PHY_TX_IMCAL0 0x11C
45 #define SATA_PHY_TX_IMCAL2 0x124
46 #define SATA_PHY_RX_IMCAL0 0x128
47 #define SATA_PHY_EQUAL 0x13C
48 #define SATA_PHY_OOB_TERM 0x144
49 #define SATA_PHY_CDR_CTRL0 0x148
50 #define SATA_PHY_CDR_CTRL1 0x14C
51 #define SATA_PHY_CDR_CTRL2 0x150
52 #define SATA_PHY_CDR_CTRL3 0x154
53 #define SATA_PHY_PI_CTRL0 0x168
54 #define SATA_PHY_POW_DWN_CTRL0 0x180
55 #define SATA_PHY_POW_DWN_CTRL1 0x184
56 #define SATA_PHY_TX_DATA_CTRL 0x188
57 #define SATA_PHY_ALIGNP 0x1A4
58 #define SATA_PHY_TX_IMCAL_STAT 0x1E4
59 #define SATA_PHY_RX_IMCAL_STAT 0x1E8
61 #define UNIPHY_PLL_LOCK BIT(0)
62 #define SATA_PHY_TX_CAL BIT(0)
63 #define SATA_PHY_RX_CAL BIT(0)
65 /* default timeout set to 1 sec */
66 #define TIMEOUT_MS 10000
67 #define DELAY_INTERVAL_US 100
69 struct qcom_apq8064_sata_phy {
75 /* Helper function to do poll and timeout */
76 static int poll_timeout(void __iomem *addr, u32 mask)
80 return readl_relaxed_poll_timeout(addr, val, (val & mask),
81 DELAY_INTERVAL_US, TIMEOUT_MS * 1000);
84 static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
86 struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
87 void __iomem *base = phy->mmio;
90 /* SATA phy initialization */
91 writel_relaxed(0x01, base + SATA_PHY_SER_CTRL);
92 writel_relaxed(0xB1, base + SATA_PHY_POW_DWN_CTRL0);
93 /* Make sure the power down happens before power up */
97 writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
98 writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
99 writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
100 writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
101 writel_relaxed(0x02, base + SATA_PHY_TX_IMCAL2);
103 /* Write UNIPHYPLL registers to configure PLL */
104 writel_relaxed(0x04, base + UNIPHY_PLL_REFCLK_CFG);
105 writel_relaxed(0x00, base + UNIPHY_PLL_PWRGEN_CFG);
107 writel_relaxed(0x0A, base + UNIPHY_PLL_CAL_CFG0);
108 writel_relaxed(0xF3, base + UNIPHY_PLL_CAL_CFG8);
109 writel_relaxed(0x01, base + UNIPHY_PLL_CAL_CFG9);
110 writel_relaxed(0xED, base + UNIPHY_PLL_CAL_CFG10);
111 writel_relaxed(0x02, base + UNIPHY_PLL_CAL_CFG11);
113 writel_relaxed(0x36, base + UNIPHY_PLL_SDM_CFG0);
114 writel_relaxed(0x0D, base + UNIPHY_PLL_SDM_CFG1);
115 writel_relaxed(0xA3, base + UNIPHY_PLL_SDM_CFG2);
116 writel_relaxed(0xF0, base + UNIPHY_PLL_SDM_CFG3);
117 writel_relaxed(0x00, base + UNIPHY_PLL_SDM_CFG4);
119 writel_relaxed(0x19, base + UNIPHY_PLL_SSC_CFG0);
120 writel_relaxed(0xE1, base + UNIPHY_PLL_SSC_CFG1);
121 writel_relaxed(0x00, base + UNIPHY_PLL_SSC_CFG2);
122 writel_relaxed(0x11, base + UNIPHY_PLL_SSC_CFG3);
124 writel_relaxed(0x04, base + UNIPHY_PLL_LKDET_CFG0);
125 writel_relaxed(0xFF, base + UNIPHY_PLL_LKDET_CFG1);
127 writel_relaxed(0x02, base + UNIPHY_PLL_GLB_CFG);
128 /* make sure global config LDO power down happens before power up */
131 writel_relaxed(0x03, base + UNIPHY_PLL_GLB_CFG);
132 writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2);
135 ret = poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
137 dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n");
142 ret = poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
144 dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n");
149 ret = poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
151 dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n");
155 /* SATA phy calibrated succesfully, power up to functional mode */
156 writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
157 writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
158 writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
160 writel_relaxed(0x00, base + SATA_PHY_POW_DWN_CTRL1);
161 writel_relaxed(0x59, base + SATA_PHY_CDR_CTRL0);
162 writel_relaxed(0x04, base + SATA_PHY_CDR_CTRL1);
163 writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL2);
164 writel_relaxed(0x00, base + SATA_PHY_PI_CTRL0);
165 writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL3);
166 writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
168 writel_relaxed(0x11, base + SATA_PHY_TX_DATA_CTRL);
169 writel_relaxed(0x43, base + SATA_PHY_ALIGNP);
170 writel_relaxed(0x04, base + SATA_PHY_OOB_TERM);
172 writel_relaxed(0x01, base + SATA_PHY_EQUAL);
173 writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL0);
174 writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL1);
179 static int qcom_apq8064_sata_phy_exit(struct phy *generic_phy)
181 struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
182 void __iomem *base = phy->mmio;
185 writel_relaxed(0xF8, base + SATA_PHY_POW_DWN_CTRL0);
186 writel_relaxed(0xFE, base + SATA_PHY_POW_DWN_CTRL1);
188 /* Power down PLL block */
189 writel_relaxed(0x00, base + UNIPHY_PLL_GLB_CFG);
194 static const struct phy_ops qcom_apq8064_sata_phy_ops = {
195 .init = qcom_apq8064_sata_phy_init,
196 .exit = qcom_apq8064_sata_phy_exit,
197 .owner = THIS_MODULE,
200 static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
202 struct qcom_apq8064_sata_phy *phy;
203 struct device *dev = &pdev->dev;
204 struct phy_provider *phy_provider;
205 struct phy *generic_phy;
208 phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
212 phy->mmio = devm_platform_ioremap_resource(pdev, 0);
213 if (IS_ERR(phy->mmio))
214 return PTR_ERR(phy->mmio);
216 generic_phy = devm_phy_create(dev, NULL, &qcom_apq8064_sata_phy_ops);
217 if (IS_ERR(generic_phy)) {
218 dev_err(dev, "%s: failed to create phy\n", __func__);
219 return PTR_ERR(generic_phy);
223 phy_set_drvdata(generic_phy, phy);
224 platform_set_drvdata(pdev, phy);
226 phy->cfg_clk = devm_clk_get(dev, "cfg");
227 if (IS_ERR(phy->cfg_clk)) {
228 dev_err(dev, "Failed to get sata cfg clock\n");
229 return PTR_ERR(phy->cfg_clk);
232 ret = clk_prepare_enable(phy->cfg_clk);
236 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
237 if (IS_ERR(phy_provider)) {
238 clk_disable_unprepare(phy->cfg_clk);
239 dev_err(dev, "%s: failed to register phy\n", __func__);
240 return PTR_ERR(phy_provider);
246 static void qcom_apq8064_sata_phy_remove(struct platform_device *pdev)
248 struct qcom_apq8064_sata_phy *phy = platform_get_drvdata(pdev);
250 clk_disable_unprepare(phy->cfg_clk);
253 static const struct of_device_id qcom_apq8064_sata_phy_of_match[] = {
254 { .compatible = "qcom,apq8064-sata-phy" },
257 MODULE_DEVICE_TABLE(of, qcom_apq8064_sata_phy_of_match);
259 static struct platform_driver qcom_apq8064_sata_phy_driver = {
260 .probe = qcom_apq8064_sata_phy_probe,
261 .remove_new = qcom_apq8064_sata_phy_remove,
263 .name = "qcom-apq8064-sata-phy",
264 .of_match_table = qcom_apq8064_sata_phy_of_match,
267 module_platform_driver(qcom_apq8064_sata_phy_driver);
269 MODULE_DESCRIPTION("QCOM apq8064 SATA PHY driver");
270 MODULE_LICENSE("GPL v2");