Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
[platform/kernel/linux-rpi.git] / drivers / phy / phy-lgm-usb.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Intel LGM USB PHY driver
4  *
5  * Copyright (C) 2020 Intel Corporation.
6  */
7
8 #include <linux/bitfield.h>
9 #include <linux/delay.h>
10 #include <linux/iopoll.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/platform_device.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/reset.h>
16 #include <linux/usb/phy.h>
17 #include <linux/workqueue.h>
18
19 #define CTRL1_OFFSET            0x14
20 #define SRAM_EXT_LD_DONE        BIT(25)
21 #define SRAM_INIT_DONE          BIT(26)
22
23 #define TCPC_OFFSET             0x1014
24 #define TCPC_MUX_CTL            GENMASK(1, 0)
25 #define MUX_NC                  0
26 #define MUX_USB                 1
27 #define MUX_DP                  2
28 #define MUX_USBDP               3
29 #define TCPC_FLIPPED            BIT(2)
30 #define TCPC_LOW_POWER_EN       BIT(3)
31 #define TCPC_VALID              BIT(4)
32 #define TCPC_CONN               \
33         (TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_USB))
34 #define TCPC_DISCONN            \
35         (TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_NC) | TCPC_LOW_POWER_EN)
36
37 static const char *const PHY_RESETS[] = { "phy31", "phy", };
38 static const char *const CTL_RESETS[] = { "apb", "ctrl", };
39
40 struct tca_apb {
41         struct reset_control *resets[ARRAY_SIZE(PHY_RESETS)];
42         struct regulator *vbus;
43         struct work_struct wk;
44         struct usb_phy phy;
45
46         bool regulator_enabled;
47         bool phy_initialized;
48         bool connected;
49 };
50
51 static int get_flipped(struct tca_apb *ta, bool *flipped)
52 {
53         union extcon_property_value property;
54         int ret;
55
56         ret = extcon_get_property(ta->phy.edev, EXTCON_USB_HOST,
57                                   EXTCON_PROP_USB_TYPEC_POLARITY, &property);
58         if (ret) {
59                 dev_err(ta->phy.dev, "no polarity property from extcon\n");
60                 return ret;
61         }
62
63         *flipped = property.intval;
64
65         return 0;
66 }
67
68 static int phy_init(struct usb_phy *phy)
69 {
70         struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
71         void __iomem *ctrl1 = phy->io_priv + CTRL1_OFFSET;
72         int val, ret, i;
73
74         if (ta->phy_initialized)
75                 return 0;
76
77         for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
78                 reset_control_deassert(ta->resets[i]);
79
80         ret = readl_poll_timeout(ctrl1, val, val & SRAM_INIT_DONE, 10, 10 * 1000);
81         if (ret) {
82                 dev_err(ta->phy.dev, "SRAM init failed, 0x%x\n", val);
83                 return ret;
84         }
85
86         writel(readl(ctrl1) | SRAM_EXT_LD_DONE, ctrl1);
87
88         ta->phy_initialized = true;
89         if (!ta->phy.edev) {
90                 writel(TCPC_CONN, ta->phy.io_priv + TCPC_OFFSET);
91                 return phy->set_vbus(phy, true);
92         }
93
94         schedule_work(&ta->wk);
95
96         return ret;
97 }
98
99 static void phy_shutdown(struct usb_phy *phy)
100 {
101         struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
102         int i;
103
104         if (!ta->phy_initialized)
105                 return;
106
107         ta->phy_initialized = false;
108         flush_work(&ta->wk);
109         ta->phy.set_vbus(&ta->phy, false);
110
111         ta->connected = false;
112         writel(TCPC_DISCONN, ta->phy.io_priv + TCPC_OFFSET);
113
114         for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
115                 reset_control_assert(ta->resets[i]);
116 }
117
118 static int phy_set_vbus(struct usb_phy *phy, int on)
119 {
120         struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
121         int ret;
122
123         if (!!on == ta->regulator_enabled)
124                 return 0;
125
126         if (on)
127                 ret = regulator_enable(ta->vbus);
128         else
129                 ret = regulator_disable(ta->vbus);
130
131         if (!ret)
132                 ta->regulator_enabled = on;
133
134         dev_dbg(ta->phy.dev, "set vbus: %d\n", on);
135         return ret;
136 }
137
138 static void tca_work(struct work_struct *work)
139 {
140         struct tca_apb *ta = container_of(work, struct tca_apb, wk);
141         bool connected;
142         bool flipped = false;
143         u32 val;
144         int ret;
145
146         ret = get_flipped(ta, &flipped);
147         if (ret)
148                 return;
149
150         connected = extcon_get_state(ta->phy.edev, EXTCON_USB_HOST);
151         if (connected == ta->connected)
152                 return;
153
154         ta->connected = connected;
155         if (connected) {
156                 val = TCPC_CONN;
157                 if (flipped)
158                         val |= TCPC_FLIPPED;
159                 dev_dbg(ta->phy.dev, "connected%s\n", flipped ? " flipped" : "");
160         } else {
161                 val = TCPC_DISCONN;
162                 dev_dbg(ta->phy.dev, "disconnected\n");
163         }
164
165         writel(val, ta->phy.io_priv + TCPC_OFFSET);
166
167         ret = ta->phy.set_vbus(&ta->phy, connected);
168         if (ret)
169                 dev_err(ta->phy.dev, "failed to set VBUS\n");
170 }
171
172 static int id_notifier(struct notifier_block *nb, unsigned long event, void *ptr)
173 {
174         struct tca_apb *ta = container_of(nb, struct tca_apb, phy.id_nb);
175
176         if (ta->phy_initialized)
177                 schedule_work(&ta->wk);
178
179         return NOTIFY_DONE;
180 }
181
182 static int vbus_notifier(struct notifier_block *nb, unsigned long evnt, void *ptr)
183 {
184         return NOTIFY_DONE;
185 }
186
187 static int phy_probe(struct platform_device *pdev)
188 {
189         struct reset_control *resets[ARRAY_SIZE(CTL_RESETS)];
190         struct device *dev = &pdev->dev;
191         struct usb_phy *phy;
192         struct tca_apb *ta;
193         int i;
194
195         ta = devm_kzalloc(dev, sizeof(*ta), GFP_KERNEL);
196         if (!ta)
197                 return -ENOMEM;
198
199         platform_set_drvdata(pdev, ta);
200         INIT_WORK(&ta->wk, tca_work);
201
202         phy = &ta->phy;
203         phy->dev = dev;
204         phy->label = dev_name(dev);
205         phy->type = USB_PHY_TYPE_USB3;
206         phy->init = phy_init;
207         phy->shutdown = phy_shutdown;
208         phy->set_vbus = phy_set_vbus;
209         phy->id_nb.notifier_call = id_notifier;
210         phy->vbus_nb.notifier_call = vbus_notifier;
211
212         phy->io_priv = devm_platform_ioremap_resource(pdev, 0);
213         if (IS_ERR(phy->io_priv))
214                 return PTR_ERR(phy->io_priv);
215
216         ta->vbus = devm_regulator_get(dev, "vbus");
217         if (IS_ERR(ta->vbus))
218                 return PTR_ERR(ta->vbus);
219
220         for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++) {
221                 resets[i] = devm_reset_control_get_exclusive(dev, CTL_RESETS[i]);
222                 if (IS_ERR(resets[i])) {
223                         dev_err(dev, "%s reset not found\n", CTL_RESETS[i]);
224                         return PTR_ERR(resets[i]);
225                 }
226         }
227
228         for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) {
229                 ta->resets[i] = devm_reset_control_get_exclusive(dev, PHY_RESETS[i]);
230                 if (IS_ERR(ta->resets[i])) {
231                         dev_err(dev, "%s reset not found\n", PHY_RESETS[i]);
232                         return PTR_ERR(ta->resets[i]);
233                 }
234         }
235
236         for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++)
237                 reset_control_assert(resets[i]);
238
239         for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
240                 reset_control_assert(ta->resets[i]);
241         /*
242          * Out-of-band reset of the controller after PHY reset will cause
243          * controller malfunctioning, so we should use in-band controller
244          * reset only and leave the controller de-asserted here.
245          */
246         for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++)
247                 reset_control_deassert(resets[i]);
248
249         /* Need to wait at least 20us after de-assert the controller */
250         usleep_range(20, 100);
251
252         return usb_add_phy_dev(phy);
253 }
254
255 static void phy_remove(struct platform_device *pdev)
256 {
257         struct tca_apb *ta = platform_get_drvdata(pdev);
258
259         usb_remove_phy(&ta->phy);
260 }
261
262 static const struct of_device_id intel_usb_phy_dt_ids[] = {
263         { .compatible = "intel,lgm-usb-phy" },
264         { }
265 };
266 MODULE_DEVICE_TABLE(of, intel_usb_phy_dt_ids);
267
268 static struct platform_driver lgm_phy_driver = {
269         .driver = {
270                 .name = "lgm-usb-phy",
271                 .of_match_table = intel_usb_phy_dt_ids,
272         },
273         .probe = phy_probe,
274         .remove_new = phy_remove,
275 };
276
277 module_platform_driver(lgm_phy_driver);
278
279 MODULE_DESCRIPTION("Intel LGM USB PHY driver");
280 MODULE_AUTHOR("Li Yin <yin1.li@intel.com>");
281 MODULE_AUTHOR("Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com>");
282 MODULE_LICENSE("GPL v2");