drivers/phy/meson-gxbb-usb2.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Meson8, Meson8b and GXBB USB2 PHY driver
   4  *
   5  * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
   6  * Copyright (C) 2018 BayLibre, SAS
   7  *
   8  * Author: Beniamino Galvani <b.galvani@gmail.com>
   9  */
  10
  11 #include <common.h>
  12 #include <clk.h>
  13 #include <dm.h>
  14 #include <generic-phy.h>
  15 #include <power/regulator.h>
  16 #include <regmap.h>
  17 #include <reset.h>
  18 #include <linux/bitops.h>
  19
  20 #define REG_CONFIG                                      0x00
  21         #define REG_CONFIG_CLK_EN                       BIT(0)
  22         #define REG_CONFIG_CLK_SEL_MASK                 GENMASK(3, 1)
  23         #define REG_CONFIG_CLK_DIV_MASK                 GENMASK(10, 4)
  24         #define REG_CONFIG_CLK_32k_ALTSEL               BIT(15)
  25         #define REG_CONFIG_TEST_TRIG                    BIT(31)
  26
  27 #define REG_CTRL                                        0x04
  28         #define REG_CTRL_SOFT_PRST                      BIT(0)
  29         #define REG_CTRL_SOFT_HRESET                    BIT(1)
  30         #define REG_CTRL_SS_SCALEDOWN_MODE_MASK         GENMASK(3, 2)
  31         #define REG_CTRL_CLK_DET_RST                    BIT(4)
  32         #define REG_CTRL_INTR_SEL                       BIT(5)
  33         #define REG_CTRL_CLK_DETECTED                   BIT(8)
  34         #define REG_CTRL_SOF_SENT_RCVD_TGL              BIT(9)
  35         #define REG_CTRL_SOF_TOGGLE_OUT                 BIT(10)
  36         #define REG_CTRL_POWER_ON_RESET                 BIT(15)
  37         #define REG_CTRL_SLEEPM                         BIT(16)
  38         #define REG_CTRL_TX_BITSTUFF_ENN_H              BIT(17)
  39         #define REG_CTRL_TX_BITSTUFF_ENN                BIT(18)
  40         #define REG_CTRL_COMMON_ON                      BIT(19)
  41         #define REG_CTRL_REF_CLK_SEL_MASK               GENMASK(21, 20)
  42         #define REG_CTRL_REF_CLK_SEL_SHIFT              20
  43         #define REG_CTRL_FSEL_MASK                      GENMASK(24, 22)
  44         #define REG_CTRL_FSEL_SHIFT                     22
  45         #define REG_CTRL_PORT_RESET                     BIT(25)
  46         #define REG_CTRL_THREAD_ID_MASK                 GENMASK(31, 26)
  47
  48 /* bits [31:26], [24:21] and [15:3] seem to be read-only */
  49 #define REG_ADP_BC                                      0x0c
  50         #define REG_ADP_BC_VBUS_VLD_EXT_SEL             BIT(0)
  51         #define REG_ADP_BC_VBUS_VLD_EXT                 BIT(1)
  52         #define REG_ADP_BC_OTG_DISABLE                  BIT(2)
  53         #define REG_ADP_BC_ID_PULLUP                    BIT(3)
  54         #define REG_ADP_BC_DRV_VBUS                     BIT(4)
  55         #define REG_ADP_BC_ADP_PRB_EN                   BIT(5)
  56         #define REG_ADP_BC_ADP_DISCHARGE                BIT(6)
  57         #define REG_ADP_BC_ADP_CHARGE                   BIT(7)
  58         #define REG_ADP_BC_SESS_END                     BIT(8)
  59         #define REG_ADP_BC_DEVICE_SESS_VLD              BIT(9)
  60         #define REG_ADP_BC_B_VALID                      BIT(10)
  61         #define REG_ADP_BC_A_VALID                      BIT(11)
  62         #define REG_ADP_BC_ID_DIG                       BIT(12)
  63         #define REG_ADP_BC_VBUS_VALID                   BIT(13)
  64         #define REG_ADP_BC_ADP_PROBE                    BIT(14)
  65         #define REG_ADP_BC_ADP_SENSE                    BIT(15)
  66         #define REG_ADP_BC_ACA_ENABLE                   BIT(16)
  67         #define REG_ADP_BC_DCD_ENABLE                   BIT(17)
  68         #define REG_ADP_BC_VDAT_DET_EN_B                BIT(18)
  69         #define REG_ADP_BC_VDAT_SRC_EN_B                BIT(19)
  70         #define REG_ADP_BC_CHARGE_SEL                   BIT(20)
  71         #define REG_ADP_BC_CHARGE_DETECT                BIT(21)
  72         #define REG_ADP_BC_ACA_PIN_RANGE_C              BIT(22)
  73         #define REG_ADP_BC_ACA_PIN_RANGE_B              BIT(23)
  74         #define REG_ADP_BC_ACA_PIN_RANGE_A              BIT(24)
  75         #define REG_ADP_BC_ACA_PIN_GND                  BIT(25)
  76         #define REG_ADP_BC_ACA_PIN_FLOAT                BIT(26)
  77
  78 #define RESET_COMPLETE_TIME                             500
  79 #define ACA_ENABLE_COMPLETE_TIME                        50
  80
  81 struct phy_meson_gxbb_usb2_priv {
  82         struct regmap *regmap;
  83         struct reset_ctl_bulk resets;
  84 #if CONFIG_IS_ENABLED(DM_REGULATOR)
  85         struct udevice *phy_supply;
  86 #endif
  87 };
  88
  89 static int phy_meson_gxbb_usb2_power_on(struct phy *phy)
  90 {
  91         struct udevice *dev = phy->dev;
  92         struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
  93         uint val;
  94
  95 #if CONFIG_IS_ENABLED(DM_REGULATOR)
  96         if (priv->phy_supply) {
  97                 int ret = regulator_set_enable(priv->phy_supply, true);
  98
  99                 if (ret)
 100                         return ret;
 101         }
 102 #endif
 103
 104         regmap_update_bits(priv->regmap, REG_CONFIG,
 105                            REG_CONFIG_CLK_32k_ALTSEL,
 106                            REG_CONFIG_CLK_32k_ALTSEL);
 107         regmap_update_bits(priv->regmap, REG_CTRL,
 108                            REG_CTRL_REF_CLK_SEL_MASK,
 109                            0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);
 110         regmap_update_bits(priv->regmap, REG_CTRL,
 111                            REG_CTRL_FSEL_MASK,
 112                            0x5 << REG_CTRL_FSEL_SHIFT);
 113
 114         /* reset the PHY */
 115         regmap_update_bits(priv->regmap, REG_CTRL,
 116                            REG_CTRL_POWER_ON_RESET,
 117                            REG_CTRL_POWER_ON_RESET);
 118         udelay(RESET_COMPLETE_TIME);
 119         regmap_update_bits(priv->regmap, REG_CTRL,
 120                            REG_CTRL_POWER_ON_RESET,
 121                            0);
 122         udelay(RESET_COMPLETE_TIME);
 123
 124         regmap_update_bits(priv->regmap, REG_CTRL,
 125                            REG_CTRL_SOF_TOGGLE_OUT,
 126                            REG_CTRL_SOF_TOGGLE_OUT);
 127
 128         /* Set host mode */
 129         regmap_update_bits(priv->regmap, REG_ADP_BC,
 130                            REG_ADP_BC_ACA_ENABLE,
 131                            REG_ADP_BC_ACA_ENABLE);
 132         udelay(ACA_ENABLE_COMPLETE_TIME);
 133
 134         regmap_read(priv->regmap, REG_ADP_BC, &val);
 135         if (val & REG_ADP_BC_ACA_PIN_FLOAT) {
 136                 pr_err("Error powering on GXBB USB PHY\n");
 137                 return -EINVAL;
 138         }
 139
 140         return 0;
 141 }
 142
 143 static int phy_meson_gxbb_usb2_power_off(struct phy *phy)
 144 {
 145 #if CONFIG_IS_ENABLED(DM_REGULATOR)
 146         struct udevice *dev = phy->dev;
 147         struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
 148
 149         if (priv->phy_supply) {
 150                 int ret = regulator_set_enable(priv->phy_supply, false);
 151
 152                 if (ret)
 153                         return ret;
 154         }
 155 #endif
 156
 157         return 0;
 158 }
 159
 160 static struct phy_ops meson_gxbb_usb2_phy_ops = {
 161         .power_on = phy_meson_gxbb_usb2_power_on,
 162         .power_off = phy_meson_gxbb_usb2_power_off,
 163 };
 164
 165 static int meson_gxbb_usb2_phy_probe(struct udevice *dev)
 166 {
 167         struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
 168         struct clk clk_usb_general, clk_usb;
 169         int ret;
 170
 171         ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
 172         if (ret)
 173                 return ret;
 174
 175         ret = clk_get_by_name(dev, "usb_general", &clk_usb_general);
 176         if (ret)
 177                 return ret;
 178
 179         ret = clk_enable(&clk_usb_general);
 180         if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
 181                 pr_err("Failed to enable PHY general clock\n");
 182                 return ret;
 183         }
 184
 185         ret = clk_get_by_name(dev, "usb", &clk_usb);
 186         if (ret)
 187                 return ret;
 188
 189         ret = clk_enable(&clk_usb);
 190         if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
 191                 pr_err("Failed to enable PHY clock\n");
 192                 return ret;
 193         }
 194
 195 #if CONFIG_IS_ENABLED(DM_REGULATOR)
 196         ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
 197         if (ret && ret != -ENOENT) {
 198                 pr_err("Failed to get PHY regulator\n");
 199                 return ret;
 200         }
 201 #endif
 202         ret = reset_get_bulk(dev, &priv->resets);
 203         if (!ret) {
 204                 ret = reset_deassert_bulk(&priv->resets);
 205                 if (ret) {
 206                         pr_err("Failed to deassert reset\n");
 207                         return ret;
 208                 }
 209         }
 210
 211         return 0;
 212 }
 213
 214 static int meson_gxbb_usb2_phy_remove(struct udevice *dev)
 215 {
 216         struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
 217
 218         return reset_release_bulk(&priv->resets);
 219 }
 220
 221 static const struct udevice_id meson_gxbb_usb2_phy_ids[] = {
 222         { .compatible = "amlogic,meson8-usb2-phy" },
 223         { .compatible = "amlogic,meson8b-usb2-phy" },
 224         { .compatible = "amlogic,meson-gxbb-usb2-phy" },
 225         { }
 226 };
 227
 228 U_BOOT_DRIVER(meson_gxbb_usb2_phy) = {
 229         .name = "meson_gxbb_usb2_phy",
 230         .id = UCLASS_PHY,
 231         .of_match = meson_gxbb_usb2_phy_ids,
 232         .probe = meson_gxbb_usb2_phy_probe,
 233         .remove = meson_gxbb_usb2_phy_remove,
 234         .ops = &meson_gxbb_usb2_phy_ops,
 235         .priv_auto      = sizeof(struct phy_meson_gxbb_usb2_priv),
 236 };