2 * This file is part of wl1271
4 * Copyright (C) 2009-2010 Nokia Corporation
6 * Contact: Luciano Coelho <luciano.coelho@nokia.com>
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
24 #include <linux/irq.h>
25 #include <linux/module.h>
26 #include <linux/vmalloc.h>
27 #include <linux/platform_device.h>
28 #include <linux/mmc/sdio.h>
29 #include <linux/mmc/sdio_func.h>
30 #include <linux/mmc/sdio_ids.h>
31 #include <linux/mmc/card.h>
32 #include <linux/mmc/host.h>
33 #include <linux/gpio.h>
34 #include <linux/wl12xx.h>
35 #include <linux/pm_runtime.h>
36 #include <linux/printk.h>
39 #include "wl12xx_80211.h"
42 #ifndef SDIO_VENDOR_ID_TI
43 #define SDIO_VENDOR_ID_TI 0x0097
46 #ifndef SDIO_DEVICE_ID_TI_WL1271
47 #define SDIO_DEVICE_ID_TI_WL1271 0x4076
50 static bool dump = false;
52 struct wl12xx_sdio_glue {
54 struct platform_device *core;
57 static const struct sdio_device_id wl1271_devices[] __devinitconst = {
58 { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) },
61 MODULE_DEVICE_TABLE(sdio, wl1271_devices);
63 static void wl1271_sdio_set_block_size(struct device *child,
66 struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
67 struct sdio_func *func = dev_to_sdio_func(glue->dev);
69 sdio_claim_host(func);
70 sdio_set_block_size(func, blksz);
71 sdio_release_host(func);
74 static void wl12xx_sdio_raw_read(struct device *child, int addr, void *buf,
75 size_t len, bool fixed)
78 struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
79 struct sdio_func *func = dev_to_sdio_func(glue->dev);
81 sdio_claim_host(func);
84 printk(KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n", addr);
85 print_hex_dump(KERN_DEBUG, "wlcore_sdio: READ ",
86 DUMP_PREFIX_OFFSET, 16, 1,
90 if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) {
91 ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
92 dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n",
93 addr, ((u8 *)buf)[0]);
96 ret = sdio_readsb(func, buf, addr, len);
98 ret = sdio_memcpy_fromio(func, buf, addr, len);
100 dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n",
104 sdio_release_host(func);
107 dev_err(child->parent, "sdio read failed (%d)\n", ret);
110 static void wl12xx_sdio_raw_write(struct device *child, int addr, void *buf,
111 size_t len, bool fixed)
114 struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
115 struct sdio_func *func = dev_to_sdio_func(glue->dev);
117 sdio_claim_host(func);
119 if (unlikely(dump)) {
120 printk(KERN_DEBUG "wlcore_sdio: WRITE to 0x%04x\n", addr);
121 print_hex_dump(KERN_DEBUG, "wlcore_sdio: WRITE ",
122 DUMP_PREFIX_OFFSET, 16, 1,
126 if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) {
127 sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret);
128 dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n",
129 addr, ((u8 *)buf)[0]);
131 dev_dbg(child->parent, "sdio write 53 addr 0x%x, %zu bytes\n",
135 ret = sdio_writesb(func, addr, buf, len);
137 ret = sdio_memcpy_toio(func, addr, buf, len);
140 sdio_release_host(func);
143 dev_err(child->parent, "sdio write failed (%d)\n", ret);
146 static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue)
149 struct sdio_func *func = dev_to_sdio_func(glue->dev);
151 /* If enabled, tell runtime PM not to power off the card */
152 if (pm_runtime_enabled(&func->dev)) {
153 ret = pm_runtime_get_sync(&func->dev);
157 /* Runtime PM is disabled: power up the card manually */
158 ret = mmc_power_restore_host(func->card->host);
163 sdio_claim_host(func);
164 sdio_enable_func(func);
165 sdio_release_host(func);
171 static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue)
174 struct sdio_func *func = dev_to_sdio_func(glue->dev);
176 sdio_claim_host(func);
177 sdio_disable_func(func);
178 sdio_release_host(func);
180 /* Power off the card manually, even if runtime PM is enabled. */
181 ret = mmc_power_save_host(func->card->host);
185 /* If enabled, let runtime PM know the card is powered off */
186 if (pm_runtime_enabled(&func->dev))
187 ret = pm_runtime_put_sync(&func->dev);
192 static int wl12xx_sdio_set_power(struct device *child, bool enable)
194 struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
197 return wl12xx_sdio_power_on(glue);
199 return wl12xx_sdio_power_off(glue);
202 static struct wl1271_if_operations sdio_ops = {
203 .read = wl12xx_sdio_raw_read,
204 .write = wl12xx_sdio_raw_write,
205 .power = wl12xx_sdio_set_power,
206 .set_block_size = wl1271_sdio_set_block_size,
209 static int __devinit wl1271_probe(struct sdio_func *func,
210 const struct sdio_device_id *id)
212 struct wl12xx_platform_data *wlan_data;
213 struct wl12xx_sdio_glue *glue;
214 struct resource res[1];
215 mmc_pm_flag_t mmcflags;
217 const char *chip_family;
219 /* We are only able to handle the wlan function */
220 if (func->num != 0x02)
223 glue = kzalloc(sizeof(*glue), GFP_KERNEL);
225 dev_err(&func->dev, "can't allocate glue\n");
229 glue->dev = &func->dev;
231 /* Grab access to FN0 for ELP reg. */
232 func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
234 /* Use block mode for transferring over one block size of data */
235 func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
237 wlan_data = wl12xx_get_platform_data();
238 if (IS_ERR(wlan_data)) {
239 ret = PTR_ERR(wlan_data);
240 dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
244 /* if sdio can keep power while host is suspended, enable wow */
245 mmcflags = sdio_get_host_pm_caps(func);
246 dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags);
248 if (mmcflags & MMC_PM_KEEP_POWER)
249 wlan_data->pwr_in_suspend = true;
251 wlan_data->ops = &sdio_ops;
253 sdio_set_drvdata(func, glue);
255 /* Tell PM core that we don't need the card to be powered now */
256 pm_runtime_put_noidle(&func->dev);
259 * Due to a hardware bug, we can't differentiate wl18xx from
260 * wl12xx, because both report the same device ID. The only
261 * way to differentiate is by checking the SDIO revision,
262 * which is 3.00 on the wl18xx chips.
264 if (func->card->cccr.sdio_vsn == SDIO_SDIO_REV_3_00)
265 chip_family = "wl18xx";
267 chip_family = "wl12xx";
269 glue->core = platform_device_alloc(chip_family, -1);
271 dev_err(glue->dev, "can't allocate platform_device");
276 glue->core->dev.parent = &func->dev;
278 memset(res, 0x00, sizeof(res));
280 res[0].start = wlan_data->irq;
281 res[0].flags = IORESOURCE_IRQ;
284 ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res));
286 dev_err(glue->dev, "can't add resources\n");
290 ret = platform_device_add_data(glue->core, wlan_data,
293 dev_err(glue->dev, "can't add platform data\n");
297 ret = platform_device_add(glue->core);
299 dev_err(glue->dev, "can't add platform device\n");
305 platform_device_put(glue->core);
314 static void __devexit wl1271_remove(struct sdio_func *func)
316 struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
318 /* Undo decrement done above in wl1271_probe */
319 pm_runtime_get_noresume(&func->dev);
321 platform_device_del(glue->core);
322 platform_device_put(glue->core);
327 static int wl1271_suspend(struct device *dev)
329 /* Tell MMC/SDIO core it's OK to power down the card
330 * (if it isn't already), but not to remove it completely */
331 struct sdio_func *func = dev_to_sdio_func(dev);
332 struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
333 struct wl1271 *wl = platform_get_drvdata(glue->core);
334 mmc_pm_flag_t sdio_flags;
337 dev_dbg(dev, "wl1271 suspend. wow_enabled: %d\n",
340 /* check whether sdio should keep power */
341 if (wl->wow_enabled) {
342 sdio_flags = sdio_get_host_pm_caps(func);
344 if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
345 dev_err(dev, "can't keep power while host "
351 /* keep power while host suspended */
352 ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
354 dev_err(dev, "error while trying to keep power\n");
362 static int wl1271_resume(struct device *dev)
364 dev_dbg(dev, "wl1271 resume\n");
369 static const struct dev_pm_ops wl1271_sdio_pm_ops = {
370 .suspend = wl1271_suspend,
371 .resume = wl1271_resume,
375 static struct sdio_driver wl1271_sdio_driver = {
376 .name = "wl1271_sdio",
377 .id_table = wl1271_devices,
378 .probe = wl1271_probe,
379 .remove = __devexit_p(wl1271_remove),
382 .pm = &wl1271_sdio_pm_ops,
387 static int __init wl1271_init(void)
389 return sdio_register_driver(&wl1271_sdio_driver);
392 static void __exit wl1271_exit(void)
394 sdio_unregister_driver(&wl1271_sdio_driver);
397 module_init(wl1271_init);
398 module_exit(wl1271_exit);
400 module_param(dump, bool, S_IRUSR | S_IWUSR);
401 MODULE_PARM_DESC(dump, "Enable sdio read/write dumps.");
403 MODULE_LICENSE("GPL");
404 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
405 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
406 MODULE_FIRMWARE(WL127X_FW_NAME_SINGLE);
407 MODULE_FIRMWARE(WL127X_FW_NAME_MULTI);
408 MODULE_FIRMWARE(WL127X_PLT_FW_NAME);
409 MODULE_FIRMWARE(WL128X_FW_NAME_SINGLE);
410 MODULE_FIRMWARE(WL128X_FW_NAME_MULTI);
411 MODULE_FIRMWARE(WL128X_PLT_FW_NAME);