2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: Data structures and registers for the rt61pci module.
24 Supported chipsets: RT2561, RT2561s, RT2661.
33 #define RT2561s_PCI_ID 0x0301
34 #define RT2561_PCI_ID 0x0302
35 #define RT2661_PCI_ID 0x0401
47 * Default offset is required for RSSI <-> dBm conversion.
49 #define DEFAULT_RSSI_OFFSET 120
52 * Register layout information.
54 #define CSR_REG_BASE 0x3000
55 #define CSR_REG_SIZE 0x04b0
56 #define EEPROM_BASE 0x0000
57 #define EEPROM_SIZE 0x0100
58 #define BBP_BASE 0x0000
59 #define BBP_SIZE 0x0080
60 #define RF_BASE 0x0004
61 #define RF_SIZE 0x0010
64 * Number of TX queues.
66 #define NUM_TX_QUEUES 4
73 * HOST_CMD_CSR: For HOST to interrupt embedded processor
75 #define HOST_CMD_CSR 0x0008
76 #define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x0000007f)
77 #define HOST_CMD_CSR_INTERRUPT_MCU FIELD32(0x00000080)
81 * SELECT_BANK: Select 8051 program bank.
82 * RESET: Enable 8051 reset state.
83 * READY: Ready state for 8051.
85 #define MCU_CNTL_CSR 0x000c
86 #define MCU_CNTL_CSR_SELECT_BANK FIELD32(0x00000001)
87 #define MCU_CNTL_CSR_RESET FIELD32(0x00000002)
88 #define MCU_CNTL_CSR_READY FIELD32(0x00000004)
92 * FORCE_CLOCK_ON: Host force MAC clock ON
94 #define SOFT_RESET_CSR 0x0010
95 #define SOFT_RESET_CSR_FORCE_CLOCK_ON FIELD32(0x00000002)
98 * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register.
100 #define MCU_INT_SOURCE_CSR 0x0014
101 #define MCU_INT_SOURCE_CSR_0 FIELD32(0x00000001)
102 #define MCU_INT_SOURCE_CSR_1 FIELD32(0x00000002)
103 #define MCU_INT_SOURCE_CSR_2 FIELD32(0x00000004)
104 #define MCU_INT_SOURCE_CSR_3 FIELD32(0x00000008)
105 #define MCU_INT_SOURCE_CSR_4 FIELD32(0x00000010)
106 #define MCU_INT_SOURCE_CSR_5 FIELD32(0x00000020)
107 #define MCU_INT_SOURCE_CSR_6 FIELD32(0x00000040)
108 #define MCU_INT_SOURCE_CSR_7 FIELD32(0x00000080)
109 #define MCU_INT_SOURCE_CSR_TWAKEUP FIELD32(0x00000100)
110 #define MCU_INT_SOURCE_CSR_TBTT_EXPIRE FIELD32(0x00000200)
113 * MCU_INT_MASK_CSR: MCU interrupt source/mask register.
115 #define MCU_INT_MASK_CSR 0x0018
116 #define MCU_INT_MASK_CSR_0 FIELD32(0x00000001)
117 #define MCU_INT_MASK_CSR_1 FIELD32(0x00000002)
118 #define MCU_INT_MASK_CSR_2 FIELD32(0x00000004)
119 #define MCU_INT_MASK_CSR_3 FIELD32(0x00000008)
120 #define MCU_INT_MASK_CSR_4 FIELD32(0x00000010)
121 #define MCU_INT_MASK_CSR_5 FIELD32(0x00000020)
122 #define MCU_INT_MASK_CSR_6 FIELD32(0x00000040)
123 #define MCU_INT_MASK_CSR_7 FIELD32(0x00000080)
124 #define MCU_INT_MASK_CSR_TWAKEUP FIELD32(0x00000100)
125 #define MCU_INT_MASK_CSR_TBTT_EXPIRE FIELD32(0x00000200)
130 #define PCI_USEC_CSR 0x001c
133 * Security key table memory.
134 * 16 entries 32-byte for shared key table
135 * 64 entries 32-byte for pairwise key table
136 * 64 entries 8-byte for pairwise ta key table
138 #define SHARED_KEY_TABLE_BASE 0x1000
139 #define PAIRWISE_KEY_TABLE_BASE 0x1200
140 #define PAIRWISE_TA_TABLE_BASE 0x1a00
142 #define SHARED_KEY_ENTRY(__idx) \
143 ( SHARED_KEY_TABLE_BASE + \
144 ((__idx) * sizeof(struct hw_key_entry)) )
145 #define PAIRWISE_KEY_ENTRY(__idx) \
146 ( PAIRWISE_KEY_TABLE_BASE + \
147 ((__idx) * sizeof(struct hw_key_entry)) )
148 #define PAIRWISE_TA_ENTRY(__idx) \
149 ( PAIRWISE_TA_TABLE_BASE + \
150 ((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
152 struct hw_key_entry {
158 struct hw_pairwise_ta_entry {
165 * Other on-chip shared memory space.
167 #define HW_CIS_BASE 0x2000
168 #define HW_NULL_BASE 0x2b00
171 * Since NULL frame won't be that long (256 byte),
172 * We steal 16 tail bytes to save debugging settings.
174 #define HW_DEBUG_SETTING_BASE 0x2bf0
177 * On-chip BEACON frame space.
179 #define HW_BEACON_BASE0 0x2c00
180 #define HW_BEACON_BASE1 0x2d00
181 #define HW_BEACON_BASE2 0x2e00
182 #define HW_BEACON_BASE3 0x2f00
184 #define HW_BEACON_OFFSET(__index) \
185 ( HW_BEACON_BASE0 + (__index * 0x0100) )
188 * HOST-MCU shared memory.
192 * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
194 #define H2M_MAILBOX_CSR 0x2100
195 #define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
196 #define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
197 #define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
198 #define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
201 * MCU_LEDCS: LED control for MCU Mailbox.
203 #define MCU_LEDCS_LED_MODE FIELD16(0x001f)
204 #define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020)
205 #define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040)
206 #define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080)
207 #define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100)
208 #define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200)
209 #define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400)
210 #define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800)
211 #define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000)
212 #define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000)
213 #define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000)
214 #define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000)
219 #define M2H_CMD_DONE_CSR 0x2104
222 * MCU_TXOP_ARRAY_BASE.
224 #define MCU_TXOP_ARRAY_BASE 0x2110
227 * MAC Control/Status Registers(CSR).
228 * Some values are set in TU, whereas 1 TU == 1024 us.
232 * MAC_CSR0: ASIC revision number.
234 #define MAC_CSR0 0x3000
235 #define MAC_CSR0_REVISION FIELD32(0x0000000f)
236 #define MAC_CSR0_CHIPSET FIELD32(0x000ffff0)
239 * MAC_CSR1: System control register.
240 * SOFT_RESET: Software reset bit, 1: reset, 0: normal.
241 * BBP_RESET: Hardware reset BBP.
242 * HOST_READY: Host is ready after initialization, 1: ready.
244 #define MAC_CSR1 0x3004
245 #define MAC_CSR1_SOFT_RESET FIELD32(0x00000001)
246 #define MAC_CSR1_BBP_RESET FIELD32(0x00000002)
247 #define MAC_CSR1_HOST_READY FIELD32(0x00000004)
250 * MAC_CSR2: STA MAC register 0.
252 #define MAC_CSR2 0x3008
253 #define MAC_CSR2_BYTE0 FIELD32(0x000000ff)
254 #define MAC_CSR2_BYTE1 FIELD32(0x0000ff00)
255 #define MAC_CSR2_BYTE2 FIELD32(0x00ff0000)
256 #define MAC_CSR2_BYTE3 FIELD32(0xff000000)
259 * MAC_CSR3: STA MAC register 1.
260 * UNICAST_TO_ME_MASK:
261 * Used to mask off bits from byte 5 of the MAC address
262 * to determine the UNICAST_TO_ME bit for RX frames.
263 * The full mask is complemented by BSS_ID_MASK:
264 * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
266 #define MAC_CSR3 0x300c
267 #define MAC_CSR3_BYTE4 FIELD32(0x000000ff)
268 #define MAC_CSR3_BYTE5 FIELD32(0x0000ff00)
269 #define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
272 * MAC_CSR4: BSSID register 0.
274 #define MAC_CSR4 0x3010
275 #define MAC_CSR4_BYTE0 FIELD32(0x000000ff)
276 #define MAC_CSR4_BYTE1 FIELD32(0x0000ff00)
277 #define MAC_CSR4_BYTE2 FIELD32(0x00ff0000)
278 #define MAC_CSR4_BYTE3 FIELD32(0xff000000)
281 * MAC_CSR5: BSSID register 1.
283 * This mask is used to mask off bits 0 and 1 of byte 5 of the
284 * BSSID. This will make sure that those bits will be ignored
285 * when determining the MY_BSS of RX frames.
286 * 0: 1-BSSID mode (BSS index = 0)
287 * 1: 2-BSSID mode (BSS index: Byte5, bit 0)
288 * 2: 2-BSSID mode (BSS index: byte5, bit 1)
289 * 3: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
291 #define MAC_CSR5 0x3014
292 #define MAC_CSR5_BYTE4 FIELD32(0x000000ff)
293 #define MAC_CSR5_BYTE5 FIELD32(0x0000ff00)
294 #define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000)
297 * MAC_CSR6: Maximum frame length register.
299 #define MAC_CSR6 0x3018
300 #define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff)
305 #define MAC_CSR7 0x301c
308 * MAC_CSR8: SIFS/EIFS register.
309 * All units are in US.
311 #define MAC_CSR8 0x3020
312 #define MAC_CSR8_SIFS FIELD32(0x000000ff)
313 #define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00)
314 #define MAC_CSR8_EIFS FIELD32(0xffff0000)
317 * MAC_CSR9: Back-Off control register.
318 * SLOT_TIME: Slot time, default is 20us for 802.11BG.
319 * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1).
320 * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1).
321 * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD.
323 #define MAC_CSR9 0x3024
324 #define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff)
325 #define MAC_CSR9_CWMIN FIELD32(0x00000f00)
326 #define MAC_CSR9_CWMAX FIELD32(0x0000f000)
327 #define MAC_CSR9_CW_SELECT FIELD32(0x00010000)
330 * MAC_CSR10: Power state configuration.
332 #define MAC_CSR10 0x3028
335 * MAC_CSR11: Power saving transition time register.
336 * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU.
337 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
338 * WAKEUP_LATENCY: In unit of TU.
340 #define MAC_CSR11 0x302c
341 #define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff)
342 #define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00)
343 #define MAC_CSR11_AUTOWAKE FIELD32(0x00008000)
344 #define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000)
347 * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1).
348 * CURRENT_STATE: 0:sleep, 1:awake.
349 * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP.
350 * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake.
352 #define MAC_CSR12 0x3030
353 #define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001)
354 #define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002)
355 #define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004)
356 #define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008)
361 #define MAC_CSR13 0x3034
362 #define MAC_CSR13_BIT0 FIELD32(0x00000001)
363 #define MAC_CSR13_BIT1 FIELD32(0x00000002)
364 #define MAC_CSR13_BIT2 FIELD32(0x00000004)
365 #define MAC_CSR13_BIT3 FIELD32(0x00000008)
366 #define MAC_CSR13_BIT4 FIELD32(0x00000010)
367 #define MAC_CSR13_BIT5 FIELD32(0x00000020)
368 #define MAC_CSR13_BIT6 FIELD32(0x00000040)
369 #define MAC_CSR13_BIT7 FIELD32(0x00000080)
370 #define MAC_CSR13_BIT8 FIELD32(0x00000100)
371 #define MAC_CSR13_BIT9 FIELD32(0x00000200)
372 #define MAC_CSR13_BIT10 FIELD32(0x00000400)
373 #define MAC_CSR13_BIT11 FIELD32(0x00000800)
374 #define MAC_CSR13_BIT12 FIELD32(0x00001000)
377 * MAC_CSR14: LED control register.
378 * ON_PERIOD: On period, default 70ms.
379 * OFF_PERIOD: Off period, default 30ms.
380 * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON.
381 * SW_LED: s/w LED, 1: ON, 0: OFF.
382 * HW_LED_POLARITY: 0: active low, 1: active high.
384 #define MAC_CSR14 0x3038
385 #define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff)
386 #define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00)
387 #define MAC_CSR14_HW_LED FIELD32(0x00010000)
388 #define MAC_CSR14_SW_LED FIELD32(0x00020000)
389 #define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000)
390 #define MAC_CSR14_SW_LED2 FIELD32(0x00080000)
393 * MAC_CSR15: NAV control.
395 #define MAC_CSR15 0x303c
398 * TXRX control registers.
399 * Some values are set in TU, whereas 1 TU == 1024 us.
403 * TXRX_CSR0: TX/RX configuration register.
404 * TSF_OFFSET: Default is 24.
405 * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame.
406 * DISABLE_RX: Disable Rx engine.
407 * DROP_CRC: Drop CRC error.
408 * DROP_PHYSICAL: Drop physical error.
409 * DROP_CONTROL: Drop control frame.
410 * DROP_NOT_TO_ME: Drop not to me unicast frame.
411 * DROP_TO_DS: Drop fram ToDs bit is true.
412 * DROP_VERSION_ERROR: Drop version error frame.
413 * DROP_MULTICAST: Drop multicast frames.
414 * DROP_BORADCAST: Drop broadcast frames.
415 * ROP_ACK_CTS: Drop received ACK and CTS.
417 #define TXRX_CSR0 0x3040
418 #define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff)
419 #define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00)
420 #define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000)
421 #define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000)
422 #define TXRX_CSR0_DROP_CRC FIELD32(0x00020000)
423 #define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000)
424 #define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000)
425 #define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000)
426 #define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000)
427 #define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000)
428 #define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000)
429 #define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000)
430 #define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000)
431 #define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000)
436 #define TXRX_CSR1 0x3044
437 #define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f)
438 #define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080)
439 #define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00)
440 #define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000)
441 #define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000)
442 #define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000)
443 #define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000)
444 #define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000)
449 #define TXRX_CSR2 0x3048
450 #define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f)
451 #define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080)
452 #define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00)
453 #define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000)
454 #define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000)
455 #define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000)
456 #define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000)
457 #define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000)
462 #define TXRX_CSR3 0x304c
463 #define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f)
464 #define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080)
465 #define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00)
466 #define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000)
467 #define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000)
468 #define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000)
469 #define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000)
470 #define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000)
473 * TXRX_CSR4: Auto-Responder/Tx-retry register.
474 * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble.
475 * OFDM_TX_RATE_DOWN: 1:enable.
476 * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step.
477 * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M.
479 #define TXRX_CSR4 0x3050
480 #define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff)
481 #define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700)
482 #define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000)
483 #define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000)
484 #define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000)
485 #define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000)
486 #define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000)
487 #define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000)
488 #define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000)
489 #define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000)
494 #define TXRX_CSR5 0x3054
497 * TXRX_CSR6: ACK/CTS payload consumed time
499 #define TXRX_CSR6 0x3058
502 * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
504 #define TXRX_CSR7 0x305c
505 #define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff)
506 #define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00)
507 #define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000)
508 #define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000)
511 * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
513 #define TXRX_CSR8 0x3060
514 #define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff)
515 #define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00)
516 #define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000)
517 #define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000)
520 * TXRX_CSR9: Synchronization control register.
521 * BEACON_INTERVAL: In unit of 1/16 TU.
522 * TSF_TICKING: Enable TSF auto counting.
523 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
524 * BEACON_GEN: Enable beacon generator.
526 #define TXRX_CSR9 0x3064
527 #define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff)
528 #define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000)
529 #define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000)
530 #define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000)
531 #define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000)
532 #define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000)
535 * TXRX_CSR10: BEACON alignment.
537 #define TXRX_CSR10 0x3068
540 * TXRX_CSR11: AES mask.
542 #define TXRX_CSR11 0x306c
545 * TXRX_CSR12: TSF low 32.
547 #define TXRX_CSR12 0x3070
548 #define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff)
551 * TXRX_CSR13: TSF high 32.
553 #define TXRX_CSR13 0x3074
554 #define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff)
557 * TXRX_CSR14: TBTT timer.
559 #define TXRX_CSR14 0x3078
562 * TXRX_CSR15: TKIP MIC priority byte "AND" mask.
564 #define TXRX_CSR15 0x307c
567 * PHY control registers.
568 * Some values are set in TU, whereas 1 TU == 1024 us.
572 * PHY_CSR0: RF/PS control.
574 #define PHY_CSR0 0x3080
575 #define PHY_CSR0_PA_PE_BG FIELD32(0x00010000)
576 #define PHY_CSR0_PA_PE_A FIELD32(0x00020000)
581 #define PHY_CSR1 0x3084
584 * PHY_CSR2: Pre-TX BBP control.
586 #define PHY_CSR2 0x3088
589 * PHY_CSR3: BBP serial control register.
590 * VALUE: Register value to program into BBP.
591 * REG_NUM: Selected BBP register.
592 * READ_CONTROL: 0: Write BBP, 1: Read BBP.
593 * BUSY: 1: ASIC is busy execute BBP programming.
595 #define PHY_CSR3 0x308c
596 #define PHY_CSR3_VALUE FIELD32(0x000000ff)
597 #define PHY_CSR3_REGNUM FIELD32(0x00007f00)
598 #define PHY_CSR3_READ_CONTROL FIELD32(0x00008000)
599 #define PHY_CSR3_BUSY FIELD32(0x00010000)
602 * PHY_CSR4: RF serial control register
603 * VALUE: Register value (include register id) serial out to RF/IF chip.
604 * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22).
605 * IF_SELECT: 1: select IF to program, 0: select RF to program.
606 * PLL_LD: RF PLL_LD status.
607 * BUSY: 1: ASIC is busy execute RF programming.
609 #define PHY_CSR4 0x3090
610 #define PHY_CSR4_VALUE FIELD32(0x00ffffff)
611 #define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000)
612 #define PHY_CSR4_IF_SELECT FIELD32(0x20000000)
613 #define PHY_CSR4_PLL_LD FIELD32(0x40000000)
614 #define PHY_CSR4_BUSY FIELD32(0x80000000)
617 * PHY_CSR5: RX to TX signal switch timing control.
619 #define PHY_CSR5 0x3094
620 #define PHY_CSR5_IQ_FLIP FIELD32(0x00000004)
623 * PHY_CSR6: TX to RX signal timing control.
625 #define PHY_CSR6 0x3098
626 #define PHY_CSR6_IQ_FLIP FIELD32(0x00000004)
629 * PHY_CSR7: TX DAC switching timing control.
631 #define PHY_CSR7 0x309c
634 * Security control register.
638 * SEC_CSR0: Shared key table control.
640 #define SEC_CSR0 0x30a0
641 #define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001)
642 #define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002)
643 #define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004)
644 #define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008)
645 #define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010)
646 #define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020)
647 #define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040)
648 #define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080)
649 #define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100)
650 #define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200)
651 #define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400)
652 #define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800)
653 #define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000)
654 #define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000)
655 #define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000)
656 #define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000)
659 * SEC_CSR1: Shared key table security mode register.
661 #define SEC_CSR1 0x30a4
662 #define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007)
663 #define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070)
664 #define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700)
665 #define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000)
666 #define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000)
667 #define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000)
668 #define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000)
669 #define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000)
672 * Pairwise key table valid bitmap registers.
673 * SEC_CSR2: pairwise key table valid bitmap 0.
674 * SEC_CSR3: pairwise key table valid bitmap 1.
676 #define SEC_CSR2 0x30a8
677 #define SEC_CSR3 0x30ac
680 * SEC_CSR4: Pairwise key table lookup control.
682 #define SEC_CSR4 0x30b0
683 #define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001)
684 #define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002)
685 #define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004)
686 #define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008)
689 * SEC_CSR5: shared key table security mode register.
691 #define SEC_CSR5 0x30b4
692 #define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007)
693 #define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070)
694 #define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700)
695 #define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000)
696 #define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000)
697 #define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000)
698 #define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000)
699 #define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000)
702 * STA control registers.
706 * STA_CSR0: RX PLCP error count & RX FCS error count.
708 #define STA_CSR0 0x30c0
709 #define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff)
710 #define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000)
713 * STA_CSR1: RX False CCA count & RX LONG frame count.
715 #define STA_CSR1 0x30c4
716 #define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff)
717 #define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000)
720 * STA_CSR2: TX Beacon count and RX FIFO overflow count.
722 #define STA_CSR2 0x30c8
723 #define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff)
724 #define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000)
727 * STA_CSR3: TX Beacon count.
729 #define STA_CSR3 0x30cc
730 #define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff)
733 * STA_CSR4: TX Result status register.
734 * VALID: 1:This register contains a valid TX result.
736 #define STA_CSR4 0x30d0
737 #define STA_CSR4_VALID FIELD32(0x00000001)
738 #define STA_CSR4_TX_RESULT FIELD32(0x0000000e)
739 #define STA_CSR4_RETRY_COUNT FIELD32(0x000000f0)
740 #define STA_CSR4_PID_SUBTYPE FIELD32(0x00001f00)
741 #define STA_CSR4_PID_TYPE FIELD32(0x0000e000)
742 #define STA_CSR4_TXRATE FIELD32(0x000f0000)
745 * QOS control registers.
749 * QOS_CSR0: TXOP holder MAC address register.
751 #define QOS_CSR0 0x30e0
752 #define QOS_CSR0_BYTE0 FIELD32(0x000000ff)
753 #define QOS_CSR0_BYTE1 FIELD32(0x0000ff00)
754 #define QOS_CSR0_BYTE2 FIELD32(0x00ff0000)
755 #define QOS_CSR0_BYTE3 FIELD32(0xff000000)
758 * QOS_CSR1: TXOP holder MAC address register.
760 #define QOS_CSR1 0x30e4
761 #define QOS_CSR1_BYTE4 FIELD32(0x000000ff)
762 #define QOS_CSR1_BYTE5 FIELD32(0x0000ff00)
765 * QOS_CSR2: TXOP holder timeout register.
767 #define QOS_CSR2 0x30e8
770 * RX QOS-CFPOLL MAC address register.
771 * QOS_CSR3: RX QOS-CFPOLL MAC address 0.
772 * QOS_CSR4: RX QOS-CFPOLL MAC address 1.
774 #define QOS_CSR3 0x30ec
775 #define QOS_CSR4 0x30f0
778 * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL.
780 #define QOS_CSR5 0x30f4
783 * Host DMA registers.
787 * AC0_BASE_CSR: AC_BK base address.
789 #define AC0_BASE_CSR 0x3400
790 #define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
793 * AC1_BASE_CSR: AC_BE base address.
795 #define AC1_BASE_CSR 0x3404
796 #define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
799 * AC2_BASE_CSR: AC_VI base address.
801 #define AC2_BASE_CSR 0x3408
802 #define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
805 * AC3_BASE_CSR: AC_VO base address.
807 #define AC3_BASE_CSR 0x340c
808 #define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
811 * MGMT_BASE_CSR: MGMT ring base address.
813 #define MGMT_BASE_CSR 0x3410
814 #define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
817 * TX_RING_CSR0: TX Ring size for AC_BK, AC_BE, AC_VI, AC_VO.
819 #define TX_RING_CSR0 0x3418
820 #define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff)
821 #define TX_RING_CSR0_AC1_RING_SIZE FIELD32(0x0000ff00)
822 #define TX_RING_CSR0_AC2_RING_SIZE FIELD32(0x00ff0000)
823 #define TX_RING_CSR0_AC3_RING_SIZE FIELD32(0xff000000)
826 * TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring
827 * TXD_SIZE: In unit of 32-bit.
829 #define TX_RING_CSR1 0x341c
830 #define TX_RING_CSR1_MGMT_RING_SIZE FIELD32(0x000000ff)
831 #define TX_RING_CSR1_HCCA_RING_SIZE FIELD32(0x0000ff00)
832 #define TX_RING_CSR1_TXD_SIZE FIELD32(0x003f0000)
835 * AIFSN_CSR: AIFSN for each EDCA AC.
841 #define AIFSN_CSR 0x3420
842 #define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f)
843 #define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0)
844 #define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00)
845 #define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000)
848 * CWMIN_CSR: CWmin for each EDCA AC.
854 #define CWMIN_CSR 0x3424
855 #define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f)
856 #define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0)
857 #define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00)
858 #define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000)
861 * CWMAX_CSR: CWmax for each EDCA AC.
867 #define CWMAX_CSR 0x3428
868 #define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f)
869 #define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0)
870 #define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00)
871 #define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000)
874 * TX_DMA_DST_CSR: TX DMA destination
875 * 0: TX ring0, 1: TX ring1, 2: TX ring2 3: invalid
877 #define TX_DMA_DST_CSR 0x342c
878 #define TX_DMA_DST_CSR_DEST_AC0 FIELD32(0x00000003)
879 #define TX_DMA_DST_CSR_DEST_AC1 FIELD32(0x0000000c)
880 #define TX_DMA_DST_CSR_DEST_AC2 FIELD32(0x00000030)
881 #define TX_DMA_DST_CSR_DEST_AC3 FIELD32(0x000000c0)
882 #define TX_DMA_DST_CSR_DEST_MGMT FIELD32(0x00000300)
885 * TX_CNTL_CSR: KICK/Abort TX.
886 * KICK_TX_AC0: For AC_BK.
887 * KICK_TX_AC1: For AC_BE.
888 * KICK_TX_AC2: For AC_VI.
889 * KICK_TX_AC3: For AC_VO.
890 * ABORT_TX_AC0: For AC_BK.
891 * ABORT_TX_AC1: For AC_BE.
892 * ABORT_TX_AC2: For AC_VI.
893 * ABORT_TX_AC3: For AC_VO.
895 #define TX_CNTL_CSR 0x3430
896 #define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001)
897 #define TX_CNTL_CSR_KICK_TX_AC1 FIELD32(0x00000002)
898 #define TX_CNTL_CSR_KICK_TX_AC2 FIELD32(0x00000004)
899 #define TX_CNTL_CSR_KICK_TX_AC3 FIELD32(0x00000008)
900 #define TX_CNTL_CSR_KICK_TX_MGMT FIELD32(0x00000010)
901 #define TX_CNTL_CSR_ABORT_TX_AC0 FIELD32(0x00010000)
902 #define TX_CNTL_CSR_ABORT_TX_AC1 FIELD32(0x00020000)
903 #define TX_CNTL_CSR_ABORT_TX_AC2 FIELD32(0x00040000)
904 #define TX_CNTL_CSR_ABORT_TX_AC3 FIELD32(0x00080000)
905 #define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000)
908 * LOAD_TX_RING_CSR: Load RX desriptor
910 #define LOAD_TX_RING_CSR 0x3434
911 #define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001)
912 #define LOAD_TX_RING_CSR_LOAD_TXD_AC1 FIELD32(0x00000002)
913 #define LOAD_TX_RING_CSR_LOAD_TXD_AC2 FIELD32(0x00000004)
914 #define LOAD_TX_RING_CSR_LOAD_TXD_AC3 FIELD32(0x00000008)
915 #define LOAD_TX_RING_CSR_LOAD_TXD_MGMT FIELD32(0x00000010)
918 * Several read-only registers, for debugging.
920 #define AC0_TXPTR_CSR 0x3438
921 #define AC1_TXPTR_CSR 0x343c
922 #define AC2_TXPTR_CSR 0x3440
923 #define AC3_TXPTR_CSR 0x3444
924 #define MGMT_TXPTR_CSR 0x3448
929 #define RX_BASE_CSR 0x3450
930 #define RX_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
934 * RXD_SIZE: In unit of 32-bit.
936 #define RX_RING_CSR 0x3454
937 #define RX_RING_CSR_RING_SIZE FIELD32(0x000000ff)
938 #define RX_RING_CSR_RXD_SIZE FIELD32(0x00003f00)
939 #define RX_RING_CSR_RXD_WRITEBACK_SIZE FIELD32(0x00070000)
944 #define RX_CNTL_CSR 0x3458
945 #define RX_CNTL_CSR_ENABLE_RX_DMA FIELD32(0x00000001)
946 #define RX_CNTL_CSR_LOAD_RXD FIELD32(0x00000002)
949 * RXPTR_CSR: Read-only, for debugging.
951 #define RXPTR_CSR 0x345c
956 #define PCI_CFG_CSR 0x3460
961 #define BUF_FORMAT_CSR 0x3464
964 * INT_SOURCE_CSR: Interrupt source register.
965 * Write one to clear corresponding bit.
967 #define INT_SOURCE_CSR 0x3468
968 #define INT_SOURCE_CSR_TXDONE FIELD32(0x00000001)
969 #define INT_SOURCE_CSR_RXDONE FIELD32(0x00000002)
970 #define INT_SOURCE_CSR_BEACON_DONE FIELD32(0x00000004)
971 #define INT_SOURCE_CSR_TX_ABORT_DONE FIELD32(0x00000010)
972 #define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00010000)
973 #define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00020000)
974 #define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00040000)
975 #define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00080000)
976 #define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
977 #define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
980 * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
981 * MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock.
983 #define INT_MASK_CSR 0x346c
984 #define INT_MASK_CSR_TXDONE FIELD32(0x00000001)
985 #define INT_MASK_CSR_RXDONE FIELD32(0x00000002)
986 #define INT_MASK_CSR_BEACON_DONE FIELD32(0x00000004)
987 #define INT_MASK_CSR_TX_ABORT_DONE FIELD32(0x00000010)
988 #define INT_MASK_CSR_ENABLE_MITIGATION FIELD32(0x00000080)
989 #define INT_MASK_CSR_MITIGATION_PERIOD FIELD32(0x0000ff00)
990 #define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00010000)
991 #define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00020000)
992 #define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00040000)
993 #define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00080000)
994 #define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
995 #define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
998 * E2PROM_CSR: EEPROM control register.
999 * RELOAD: Write 1 to reload eeprom content.
1000 * TYPE_93C46: 1: 93c46, 0:93c66.
1001 * LOAD_STATUS: 1:loading, 0:done.
1003 #define E2PROM_CSR 0x3470
1004 #define E2PROM_CSR_RELOAD FIELD32(0x00000001)
1005 #define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000002)
1006 #define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000004)
1007 #define E2PROM_CSR_DATA_IN FIELD32(0x00000008)
1008 #define E2PROM_CSR_DATA_OUT FIELD32(0x00000010)
1009 #define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020)
1010 #define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
1013 * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register.
1014 * AC0_TX_OP: For AC_BK, in unit of 32us.
1015 * AC1_TX_OP: For AC_BE, in unit of 32us.
1017 #define AC_TXOP_CSR0 0x3474
1018 #define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff)
1019 #define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000)
1022 * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register.
1023 * AC2_TX_OP: For AC_VI, in unit of 32us.
1024 * AC3_TX_OP: For AC_VO, in unit of 32us.
1026 #define AC_TXOP_CSR1 0x3478
1027 #define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff)
1028 #define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000)
1033 #define DMA_STATUS_CSR 0x3480
1038 #define TEST_MODE_CSR 0x3484
1043 #define UART0_TX_CSR 0x3488
1048 #define UART0_RX_CSR 0x348c
1053 #define UART0_FRAME_CSR 0x3490
1058 #define UART0_BUFFER_CSR 0x3494
1062 * RF_PS: Set RF interface value to power save
1064 #define IO_CNTL_CSR 0x3498
1065 #define IO_CNTL_CSR_RF_PS FIELD32(0x00000004)
1068 * UART_INT_SOURCE_CSR
1070 #define UART_INT_SOURCE_CSR 0x34a8
1075 #define UART_INT_MASK_CSR 0x34ac
1080 #define PBF_QUEUE_CSR 0x34b0
1083 * Firmware DMA registers.
1084 * Firmware DMA registers are dedicated for MCU usage
1085 * and should not be touched by host driver.
1086 * Therefore we skip the definition of these registers.
1088 #define FW_TX_BASE_CSR 0x34c0
1089 #define FW_TX_START_CSR 0x34c4
1090 #define FW_TX_LAST_CSR 0x34c8
1091 #define FW_MODE_CNTL_CSR 0x34cc
1092 #define FW_TXPTR_CSR 0x34d0
1095 * 8051 firmware image.
1097 #define FIRMWARE_RT2561 "rt2561.bin"
1098 #define FIRMWARE_RT2561s "rt2561s.bin"
1099 #define FIRMWARE_RT2661 "rt2661.bin"
1100 #define FIRMWARE_IMAGE_BASE 0x4000
1104 * The wordsize of the BBP is 8 bits.
1110 #define BBP_R2_BG_MODE FIELD8(0x20)
1115 #define BBP_R3_SMART_MODE FIELD8(0x01)
1118 * R4: RX antenna control
1119 * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529)
1123 * ANTENNA_CONTROL semantics (guessed):
1124 * 0x1: Software controlled antenna switching (fixed or SW diversity)
1125 * 0x2: Hardware diversity.
1127 #define BBP_R4_RX_ANTENNA_CONTROL FIELD8(0x03)
1128 #define BBP_R4_RX_FRAME_END FIELD8(0x20)
1133 #define BBP_R77_RX_ANTENNA FIELD8(0x03)
1142 #define RF3_TXPOWER FIELD32(0x00003e00)
1147 #define RF4_FREQ_OFFSET FIELD32(0x0003f000)
1151 * The wordsize of the EEPROM is 16 bits.
1157 #define EEPROM_MAC_ADDR_0 0x0002
1158 #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
1159 #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
1160 #define EEPROM_MAC_ADDR1 0x0003
1161 #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
1162 #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
1163 #define EEPROM_MAC_ADDR_2 0x0004
1164 #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
1165 #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
1169 * ANTENNA_NUM: Number of antenna's.
1170 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1171 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1172 * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only.
1173 * DYN_TXAGC: Dynamic TX AGC control.
1174 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
1175 * RF_TYPE: Rf_type of this adapter.
1177 #define EEPROM_ANTENNA 0x0010
1178 #define EEPROM_ANTENNA_NUM FIELD16(0x0003)
1179 #define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
1180 #define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
1181 #define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040)
1182 #define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
1183 #define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
1184 #define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
1187 * EEPROM NIC config.
1188 * ENABLE_DIVERSITY: 1:enable, 0:disable.
1189 * EXTERNAL_LNA_BG: External LNA enable for 2.4G.
1190 * CARDBUS_ACCEL: 0:enable, 1:disable.
1191 * EXTERNAL_LNA_A: External LNA enable for 5G.
1193 #define EEPROM_NIC 0x0011
1194 #define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001)
1195 #define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002)
1196 #define EEPROM_NIC_RX_FIXED FIELD16(0x0004)
1197 #define EEPROM_NIC_TX_FIXED FIELD16(0x0008)
1198 #define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010)
1199 #define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020)
1200 #define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040)
1204 * GEO_A: Default geographical setting for 5GHz band
1205 * GEO: Default geographical setting.
1207 #define EEPROM_GEOGRAPHY 0x0012
1208 #define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff)
1209 #define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00)
1214 #define EEPROM_BBP_START 0x0013
1215 #define EEPROM_BBP_SIZE 16
1216 #define EEPROM_BBP_VALUE FIELD16(0x00ff)
1217 #define EEPROM_BBP_REG_ID FIELD16(0xff00)
1220 * EEPROM TXPOWER 802.11G
1222 #define EEPROM_TXPOWER_G_START 0x0023
1223 #define EEPROM_TXPOWER_G_SIZE 7
1224 #define EEPROM_TXPOWER_G_1 FIELD16(0x00ff)
1225 #define EEPROM_TXPOWER_G_2 FIELD16(0xff00)
1230 #define EEPROM_FREQ 0x002f
1231 #define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
1232 #define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00)
1233 #define EEPROM_FREQ_SEQ FIELD16(0x0300)
1237 * POLARITY_RDY_G: Polarity RDY_G setting.
1238 * POLARITY_RDY_A: Polarity RDY_A setting.
1239 * POLARITY_ACT: Polarity ACT setting.
1240 * POLARITY_GPIO_0: Polarity GPIO0 setting.
1241 * POLARITY_GPIO_1: Polarity GPIO1 setting.
1242 * POLARITY_GPIO_2: Polarity GPIO2 setting.
1243 * POLARITY_GPIO_3: Polarity GPIO3 setting.
1244 * POLARITY_GPIO_4: Polarity GPIO4 setting.
1245 * LED_MODE: Led mode.
1247 #define EEPROM_LED 0x0030
1248 #define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001)
1249 #define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
1250 #define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
1251 #define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
1252 #define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
1253 #define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
1254 #define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
1255 #define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
1256 #define EEPROM_LED_LED_MODE FIELD16(0x1f00)
1259 * EEPROM TXPOWER 802.11A
1261 #define EEPROM_TXPOWER_A_START 0x0031
1262 #define EEPROM_TXPOWER_A_SIZE 12
1263 #define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
1264 #define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
1267 * EEPROM RSSI offset 802.11BG
1269 #define EEPROM_RSSI_OFFSET_BG 0x004d
1270 #define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff)
1271 #define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00)
1274 * EEPROM RSSI offset 802.11A
1276 #define EEPROM_RSSI_OFFSET_A 0x004e
1277 #define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff)
1278 #define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00)
1281 * MCU mailbox commands.
1283 #define MCU_SLEEP 0x30
1284 #define MCU_WAKEUP 0x31
1285 #define MCU_LED 0x50
1286 #define MCU_LED_STRENGTH 0x52
1289 * DMA descriptor defines.
1291 #define TXD_DESC_SIZE ( 16 * sizeof(__le32) )
1292 #define TXINFO_SIZE ( 6 * sizeof(__le32) )
1293 #define RXD_DESC_SIZE ( 16 * sizeof(__le32) )
1296 * TX descriptor format for TX, PRIO and Beacon Ring.
1301 * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used.
1302 * KEY_TABLE: Use per-client pairwise KEY table.
1304 * Key index (0~31) to the pairwise KEY table.
1305 * 0~3 to shared KEY table 0 (BSS0).
1306 * 4~7 to shared KEY table 1 (BSS1).
1307 * 8~11 to shared KEY table 2 (BSS2).
1308 * 12~15 to shared KEY table 3 (BSS3).
1309 * BURST: Next frame belongs to same "burst" event.
1311 #define TXD_W0_OWNER_NIC FIELD32(0x00000001)
1312 #define TXD_W0_VALID FIELD32(0x00000002)
1313 #define TXD_W0_MORE_FRAG FIELD32(0x00000004)
1314 #define TXD_W0_ACK FIELD32(0x00000008)
1315 #define TXD_W0_TIMESTAMP FIELD32(0x00000010)
1316 #define TXD_W0_OFDM FIELD32(0x00000020)
1317 #define TXD_W0_IFS FIELD32(0x00000040)
1318 #define TXD_W0_RETRY_MODE FIELD32(0x00000080)
1319 #define TXD_W0_TKIP_MIC FIELD32(0x00000100)
1320 #define TXD_W0_KEY_TABLE FIELD32(0x00000200)
1321 #define TXD_W0_KEY_INDEX FIELD32(0x0000fc00)
1322 #define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1323 #define TXD_W0_BURST FIELD32(0x10000000)
1324 #define TXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1328 * HOST_Q_ID: EDCA/HCCA queue ID.
1329 * HW_SEQUENCE: MAC overwrites the frame sequence number.
1330 * BUFFER_COUNT: Number of buffers in this TXD.
1332 #define TXD_W1_HOST_Q_ID FIELD32(0x0000000f)
1333 #define TXD_W1_AIFSN FIELD32(0x000000f0)
1334 #define TXD_W1_CWMIN FIELD32(0x00000f00)
1335 #define TXD_W1_CWMAX FIELD32(0x0000f000)
1336 #define TXD_W1_IV_OFFSET FIELD32(0x003f0000)
1337 #define TXD_W1_PIGGY_BACK FIELD32(0x01000000)
1338 #define TXD_W1_HW_SEQUENCE FIELD32(0x10000000)
1339 #define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000)
1342 * Word2: PLCP information
1344 #define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff)
1345 #define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00)
1346 #define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
1347 #define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000)
1352 #define TXD_W3_IV FIELD32(0xffffffff)
1357 #define TXD_W4_EIV FIELD32(0xffffffff)
1361 * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field).
1362 * TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler.
1363 * TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler.
1364 * WAITING_DMA_DONE_INT: TXD been filled with data
1365 * and waiting for TxDoneISR housekeeping.
1367 #define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff)
1368 #define TXD_W5_PID_SUBTYPE FIELD32(0x00001f00)
1369 #define TXD_W5_PID_TYPE FIELD32(0x0000e000)
1370 #define TXD_W5_TX_POWER FIELD32(0x00ff0000)
1371 #define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000)
1374 * the above 24-byte is called TXINFO and will be DMAed to MAC block
1375 * through TXFIFO. MAC block use this TXINFO to control the transmission
1376 * behavior of this frame.
1377 * The following fields are not used by MAC block.
1378 * They are used by DMA block and HOST driver only.
1379 * Once a frame has been DMA to ASIC, all the following fields are useless
1384 * Word6-10: Buffer physical address
1386 #define TXD_W6_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1387 #define TXD_W7_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1388 #define TXD_W8_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1389 #define TXD_W9_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1390 #define TXD_W10_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1393 * Word11-13: Buffer length
1395 #define TXD_W11_BUFFER_LENGTH0 FIELD32(0x00000fff)
1396 #define TXD_W11_BUFFER_LENGTH1 FIELD32(0x0fff0000)
1397 #define TXD_W12_BUFFER_LENGTH2 FIELD32(0x00000fff)
1398 #define TXD_W12_BUFFER_LENGTH3 FIELD32(0x0fff0000)
1399 #define TXD_W13_BUFFER_LENGTH4 FIELD32(0x00000fff)
1404 #define TXD_W14_SK_BUFFER FIELD32(0xffffffff)
1409 #define TXD_W15_NEXT_SK_BUFFER FIELD32(0xffffffff)
1412 * RX descriptor format for RX Ring.
1417 * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key.
1418 * KEY_INDEX: Decryption key actually used.
1420 #define RXD_W0_OWNER_NIC FIELD32(0x00000001)
1421 #define RXD_W0_DROP FIELD32(0x00000002)
1422 #define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004)
1423 #define RXD_W0_MULTICAST FIELD32(0x00000008)
1424 #define RXD_W0_BROADCAST FIELD32(0x00000010)
1425 #define RXD_W0_MY_BSS FIELD32(0x00000020)
1426 #define RXD_W0_CRC_ERROR FIELD32(0x00000040)
1427 #define RXD_W0_OFDM FIELD32(0x00000080)
1428 #define RXD_W0_CIPHER_ERROR FIELD32(0x00000300)
1429 #define RXD_W0_KEY_INDEX FIELD32(0x0000fc00)
1430 #define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1431 #define RXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1435 * SIGNAL: RX raw data rate reported by BBP.
1437 #define RXD_W1_SIGNAL FIELD32(0x000000ff)
1438 #define RXD_W1_RSSI_AGC FIELD32(0x00001f00)
1439 #define RXD_W1_RSSI_LNA FIELD32(0x00006000)
1440 #define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000)
1444 * IV: Received IV of originally encrypted.
1446 #define RXD_W2_IV FIELD32(0xffffffff)
1450 * EIV: Received EIV of originally encrypted.
1452 #define RXD_W3_EIV FIELD32(0xffffffff)
1456 * ICV: Received ICV of originally encrypted.
1457 * NOTE: This is a guess, the official definition is "reserved"
1459 #define RXD_W4_ICV FIELD32(0xffffffff)
1462 * the above 20-byte is called RXINFO and will be DMAed to MAC RX block
1463 * and passed to the HOST driver.
1464 * The following fields are for DMA block and HOST usage only.
1465 * Can't be touched by ASIC MAC block.
1471 #define RXD_W5_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1474 * Word6-15: Reserved
1476 #define RXD_W6_RESERVED FIELD32(0xffffffff)
1477 #define RXD_W7_RESERVED FIELD32(0xffffffff)
1478 #define RXD_W8_RESERVED FIELD32(0xffffffff)
1479 #define RXD_W9_RESERVED FIELD32(0xffffffff)
1480 #define RXD_W10_RESERVED FIELD32(0xffffffff)
1481 #define RXD_W11_RESERVED FIELD32(0xffffffff)
1482 #define RXD_W12_RESERVED FIELD32(0xffffffff)
1483 #define RXD_W13_RESERVED FIELD32(0xffffffff)
1484 #define RXD_W14_RESERVED FIELD32(0xffffffff)
1485 #define RXD_W15_RESERVED FIELD32(0xffffffff)
1488 * Macros for converting txpower from EEPROM to mac80211 value
1489 * and from mac80211 value to register value.
1491 #define MIN_TXPOWER 0
1492 #define MAX_TXPOWER 31
1493 #define DEFAULT_TXPOWER 24
1495 #define TXPOWER_FROM_DEV(__txpower) \
1496 (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
1498 #define TXPOWER_TO_DEV(__txpower) \
1499 clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
1501 #endif /* RT61PCI_H */