drivers/net/wireless/microchip/wilc1000/wlan_if.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
   4  * All rights reserved.
   5  */
   6
   7 #ifndef WILC_WLAN_IF_H
   8 #define WILC_WLAN_IF_H
   9
  10 #include <linux/netdevice.h>
  11 #include "fw.h"
  12
  13 /********************************************
  14  *
  15  *      Wlan Configuration ID
  16  *
  17  ********************************************/
  18
  19 enum bss_types {
  20         WILC_FW_BSS_TYPE_INFRA = 0,
  21         WILC_FW_BSS_TYPE_INDEPENDENT,
  22         WILC_FW_BSS_TYPE_AP,
  23 };
  24
  25 enum {
  26         WILC_FW_OPER_MODE_B_ONLY = 0,    /* 1, 2 M, otherwise 5, 11 M */
  27         WILC_FW_OPER_MODE_G_ONLY,        /* 6,12,24 otherwise 9,18,36,48,54 */
  28         WILC_FW_OPER_MODE_G_MIXED_11B_1, /* 1,2,5.5,11 otherwise all on */
  29         WILC_FW_OPER_MODE_G_MIXED_11B_2, /* 1,2,5,11,6,12,24 otherwise all on */
  30 };
  31
  32 enum {
  33         WILC_FW_PREAMBLE_SHORT = 0,     /* Short Preamble */
  34         WILC_FW_PREAMBLE_LONG = 1,      /* Long Preamble */
  35         WILC_FW_PREAMBLE_AUTO = 2,      /* Auto Preamble Selection */
  36 };
  37
  38 enum {
  39         WILC_FW_PASSIVE_SCAN = 0,
  40         WILC_FW_ACTIVE_SCAN = 1,
  41 };
  42
  43 enum {
  44         WILC_FW_NO_POWERSAVE = 0,
  45         WILC_FW_MIN_FAST_PS = 1,
  46         WILC_FW_MAX_FAST_PS = 2,
  47         WILC_FW_MIN_PSPOLL_PS = 3,
  48         WILC_FW_MAX_PSPOLL_PS = 4
  49 };
  50
  51 enum bus_acquire {
  52         WILC_BUS_ACQUIRE_ONLY = 0,
  53         WILC_BUS_ACQUIRE_AND_WAKEUP = 1,
  54 };
  55
  56 enum bus_release {
  57         WILC_BUS_RELEASE_ONLY = 0,
  58         WILC_BUS_RELEASE_ALLOW_SLEEP = 1,
  59 };
  60
  61 enum {
  62         WILC_FW_NO_ENCRYPT = 0,
  63         WILC_FW_ENCRYPT_ENABLED = BIT(0),
  64         WILC_FW_WEP = BIT(1),
  65         WILC_FW_WEP_EXTENDED = BIT(2),
  66         WILC_FW_WPA = BIT(3),
  67         WILC_FW_WPA2 = BIT(4),
  68         WILC_FW_AES = BIT(5),
  69         WILC_FW_TKIP = BIT(6)
  70 };
  71
  72 enum {
  73         WILC_FW_SEC_NO = WILC_FW_NO_ENCRYPT,
  74         WILC_FW_SEC_WEP = WILC_FW_WEP | WILC_FW_ENCRYPT_ENABLED,
  75         WILC_FW_SEC_WEP_EXTENDED = WILC_FW_WEP_EXTENDED | WILC_FW_SEC_WEP,
  76         WILC_FW_SEC_WPA = WILC_FW_WPA | WILC_FW_ENCRYPT_ENABLED,
  77         WILC_FW_SEC_WPA_AES = WILC_FW_AES | WILC_FW_SEC_WPA,
  78         WILC_FW_SEC_WPA_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA,
  79         WILC_FW_SEC_WPA2 = WILC_FW_WPA2 | WILC_FW_ENCRYPT_ENABLED,
  80         WILC_FW_SEC_WPA2_AES = WILC_FW_AES | WILC_FW_SEC_WPA2,
  81         WILC_FW_SEC_WPA2_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA2
  82 };
  83
  84 enum authtype {
  85         WILC_FW_AUTH_OPEN_SYSTEM = 1,
  86         WILC_FW_AUTH_SHARED_KEY = 2,
  87         WILC_FW_AUTH_ANY = 3,
  88         WILC_FW_AUTH_IEEE8021 = 5,
  89         WILC_FW_AUTH_SAE = 7,
  90         WILC_FW_AUTH_IEE8021X_SHA256 = 9,
  91         WILC_FW_AUTH_OPEN_SYSTEM_SHA256 = 13
  92 };
  93
  94 enum mfptype {
  95         WILC_FW_MFP_NONE = 0x0,
  96         WILC_FW_MFP_OPTIONAL = 0x1,
  97         WILC_FW_MFP_REQUIRED = 0x2
  98 };
  99
 100 enum site_survey {
 101         WILC_FW_SITE_SURVEY_1CH = 0,
 102         WILC_FW_SITE_SURVEY_ALL_CH = 1,
 103         WILC_FW_SITE_SURVEY_OFF = 2
 104 };
 105
 106 enum {
 107         WILC_FW_ACK_POLICY_NORMAL = 0,
 108         WILC_FW_ACK_NO_POLICY,
 109 };
 110
 111 enum {
 112         WILC_FW_REKEY_POLICY_DISABLE = 1,
 113         WILC_FW_REKEY_POLICY_TIME_BASE,
 114         WILC_FW_REKEY_POLICY_PKT_BASE,
 115         WILC_FW_REKEY_POLICY_TIME_PKT_BASE
 116 };
 117
 118 enum {
 119         WILC_FW_FILTER_NO = 0x00,
 120         WILC_FW_FILTER_AP_ONLY = 0x01,
 121         WILC_FW_FILTER_STA_ONLY = 0x02
 122 };
 123
 124 enum {
 125         WILC_FW_11N_PROT_AUTO = 0,      /* Auto */
 126         WILC_FW_11N_NO_PROT,            /* Do not use any protection */
 127         WILC_FW_11N_PROT_ERP,           /* Protect all ERP frame exchanges */
 128         WILC_FW_11N_PROT_HT,            /* Protect all HT frame exchanges  */
 129         WILC_FW_11N_PROT_GF             /* Protect all GF frame exchanges  */
 130 };
 131
 132 enum {
 133         WILC_FW_ERP_PROT_SELF_CTS,
 134         WILC_FW_ERP_PROT_RTS_CTS,
 135 };
 136
 137 enum {
 138         WILC_FW_11N_OP_MODE_HT_MIXED = 1,
 139         WILC_FW_11N_OP_MODE_HT_ONLY_20MHZ,
 140         WILC_FW_11N_OP_MODE_HT_ONLY_20_40MHZ,
 141 };
 142
 143 enum {
 144         WILC_FW_OBBS_NONHT_NO_DETECT = 0,
 145         WILC_FW_OBBS_NONHT_DETECT_ONLY = 1,
 146         WILC_FW_OBBS_NONHT_DETECT_PROTECT = 2,
 147         WILC_FW_OBBS_NONHT_DETECT_PROTECT_REPORT = 3,
 148 };
 149
 150 enum {
 151         WILC_FW_HT_PROT_RTS_CTS_NONHT = 0,  /* RTS-CTS at non-HT rate */
 152         WILC_FW_HT_PROT_FIRST_FRAME_NONHT,  /* First frame at non-HT rate */
 153         WILC_FW_HT_PROT_LSIG_TXOP,          /* LSIG TXOP Protection */
 154         WILC_FW_HT_PROT_FIRST_FRAME_MIXED,  /* First frame at Mixed format */
 155 };
 156
 157 enum {
 158         WILC_FW_SMPS_MODE_STATIC = 1,
 159         WILC_FW_SMPS_MODE_DYNAMIC = 2,
 160         WILC_FW_SMPS_MODE_MIMO = 3,     /* power save disable */
 161 };
 162
 163 enum {
 164         WILC_FW_TX_RATE_AUTO = 0,
 165         WILC_FW_TX_RATE_MBPS_1 = 1,
 166         WILC_FW_TX_RATE_MBPS_2 = 2,
 167         WILC_FW_TX_RATE_MBPS_5_5 = 5,
 168         WILC_FW_TX_RATE_MBPS_11 = 11,
 169         WILC_FW_TX_RATE_MBPS_6 = 6,
 170         WILC_FW_TX_RATE_MBPS_9 = 9,
 171         WILC_FW_TX_RATE_MBPS_12 = 12,
 172         WILC_FW_TX_RATE_MBPS_18 = 18,
 173         WILC_FW_TX_RATE_MBPS_24 = 24,
 174         WILC_FW_TX_RATE_MBPS_36 = 36,
 175         WILC_FW_TX_RATE_MBPS_48 = 48,
 176         WILC_FW_TX_RATE_MBPS_54 = 54
 177 };
 178
 179 enum {
 180         WILC_FW_DEFAULT_SCAN = 0,
 181         WILC_FW_USER_SCAN = BIT(0),
 182         WILC_FW_OBSS_PERIODIC_SCAN = BIT(1),
 183         WILC_FW_OBSS_ONETIME_SCAN = BIT(2)
 184 };
 185
 186 enum {
 187         WILC_FW_ACTION_FRM_IDX = 0,
 188         WILC_FW_PROBE_REQ_IDX = 1,
 189         WILC_FW_AUTH_REQ_IDX = 2
 190 };
 191
 192 enum wid_type {
 193         WID_CHAR                = 0,
 194         WID_SHORT               = 1,
 195         WID_INT                 = 2,
 196         WID_STR                 = 3,
 197         WID_BIN_DATA            = 4,
 198         WID_BIN                 = 5,
 199 };
 200
 201 struct wid {
 202         u16 id;
 203         enum wid_type type;
 204         s32 size;
 205         s8 *val;
 206 };
 207
 208 enum {
 209         WID_NIL                         = 0xffff,
 210
 211         /*
 212          *  BSS Type
 213          *  -----------------------------------------------------------
 214          *  Configuration : Infrastructure   Independent   Access Point
 215          *  Values to set :         0               1            2
 216          *  -----------------------------------------------------------
 217          */
 218         WID_BSS_TYPE                    = 0x0000,
 219
 220         /*
 221          *  Transmit Rate
 222          *  -----------------------------------------------------------
 223          *  Configuration : 1  2  5.5  11  6  9  12  18  24  36  48  54
 224          *  Values to set : 1  2    5  11  6  9  12  18  24  36  48  54
 225          *  -----------------------------------------------------------
 226          */
 227         WID_CURRENT_TX_RATE             = 0x0001,
 228
 229         /*
 230          *  Channel
 231          *  -----------------------------------------------------------
 232          *  Configuration(g) : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
 233          *  Values to set    : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
 234          *  -----------------------------------------------------------
 235          */
 236         WID_CURRENT_CHANNEL             = 0x0002,
 237
 238         /*
 239          *  Preamble
 240          *  -----------------------------------------------------------
 241          *  Configuration :    short    long      Auto
 242          *  Values to set :       0       1         2
 243          *  -----------------------------------------------------------
 244          */
 245         WID_PREAMBLE                    = 0x0003,
 246
 247         /*
 248          * 11g operating mode (ignored if 11g not present)
 249          *  -----------------------------------------------------------
 250          *  Configuration :   HighPerf  Compat(RSet #1) Compat(RSet #2)
 251          *  Values to set :          1               2               3
 252          *  -----------------------------------------------------------
 253          */
 254         WID_11G_OPERATING_MODE          = 0x0004,
 255
 256         /*
 257          *  Mac status (response only)
 258          *  -----------------------------------------------------------
 259          *  Configuration :   disconnect  connect
 260          *  Values to get :          0       1
 261          *  -----------------------------------------------------------
 262          */
 263         WID_STATUS                      = 0x0005,
 264
 265         /*
 266          *  Scan type
 267          *  -----------------------------------------------------------
 268          *  Configuration :   Passive Scanning   Active Scanning
 269          *  Values to set :                  0                 1
 270          *  -----------------------------------------------------------
 271          */
 272         WID_SCAN_TYPE                   = 0x0007,
 273
 274         /*
 275          *  Key Id (WEP default key Id)
 276          *  -----------------------------------------------------------
 277          *  Configuration :   Any value between 0 to 3
 278          *  Values to set :   Same value. Default is 0
 279          *  -----------------------------------------------------------
 280          */
 281         WID_KEY_ID                      = 0x0009,
 282
 283         /*
 284          *  QoS Enable
 285          *  -----------------------------------------------------------
 286          *  Configuration :   QoS Disable   WMM Enable
 287          *  Values to set :   0             1
 288          *  -----------------------------------------------------------
 289          */
 290         WID_QOS_ENABLE                  = 0x000A,
 291
 292         /*
 293          *  Power Management
 294          *  -----------------------------------------------------------
 295          *  Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE
 296          *  Values to set : 0            1             2
 297          *  -----------------------------------------------------------
 298          */
 299         WID_POWER_MANAGEMENT            = 0x000B,
 300
 301         /*
 302          *  WEP/802 11I Configuration
 303          *  -----------------------------------------------------------
 304          *  Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
 305          *  Values (0x)  :   00     03   07     29       49       31      51
 306          *  Configuration:WPA-AES+TKIP RSN-AES+TKIP
 307          *  Values (0x)  :      69        71
 308          *  -----------------------------------------------------------
 309          */
 310         WID_11I_MODE                    = 0x000C,
 311
 312         /*
 313          *  WEP Configuration: Used in BSS STA mode only when WEP is enabled
 314          *  -----------------------------------------------------------
 315          *  Configuration : Open System Shared Key Any Type | 802.1x Auth
 316          *  Values (0x)   :    01             02         03 |    BIT2
 317          *  -----------------------------------------------------------
 318          */
 319         WID_AUTH_TYPE                   = 0x000D,
 320
 321         /*
 322          *  Site Survey Type
 323          *  -----------------------------------------------------------
 324          *  Configuration       :  Values to set
 325          *  Survey 1 Channel    :  0
 326          *  survey all Channels :  1
 327          *  Disable Site Survey :  2
 328          *  -----------------------------------------------------------
 329          */
 330         WID_SITE_SURVEY                 = 0x000E,
 331
 332         /*
 333          *  Listen Interval
 334          *  -----------------------------------------------------------
 335          *  Configuration :   Any value between 1 to 255
 336          *  Values to set :   Same value. Default is 3
 337          *  -----------------------------------------------------------
 338          */
 339         WID_LISTEN_INTERVAL             = 0x000F,
 340
 341         /*
 342          *  DTIM Period
 343          *  -----------------------------------------------------------
 344          *  Configuration :   Any value between 1 to 255
 345          *  Values to set :   Same value. Default is 3
 346          *  -----------------------------------------------------------
 347          */
 348         WID_DTIM_PERIOD                 = 0x0010,
 349
 350         /*
 351          *  ACK Policy
 352          *  -----------------------------------------------------------
 353          *  Configuration :   Normal Ack            No Ack
 354          *  Values to set :       0                   1
 355          *  -----------------------------------------------------------
 356          */
 357         WID_ACK_POLICY                  = 0x0011,
 358
 359         /*
 360          *  Reset MAC (Set only)
 361          *  -----------------------------------------------------------
 362          *  Configuration :   Don't Reset       Reset   No Request
 363          *  Values to set :       0               1         2
 364          *  -----------------------------------------------------------
 365          */
 366         WID_RESET                       = 0x0012,
 367
 368         /*
 369          *  Broadcast SSID Option: Setting this will adhere to "" SSID element
 370          *  -----------------------------------------------------------
 371          *  Configuration :   Enable             Disable
 372          *  Values to set :   1                  0
 373          *  -----------------------------------------------------------
 374          */
 375         WID_BCAST_SSID                  = 0x0015,
 376
 377         /*
 378          *  Disconnect (Station)
 379          *  -----------------------------------------------------------
 380          *  Configuration :   Association ID
 381          *  Values to set :   Association ID
 382          *  -----------------------------------------------------------
 383          */
 384         WID_DISCONNECT                  = 0x0016,
 385
 386         /*
 387          *  11a Tx Power Level
 388          *  -----------------------------------------------------------
 389          *  Configuration : Sets TX Power (Higher the value greater the power)
 390          *  Values to set : Any value between 0 and 63 (inclusive Default 48)
 391          *  -----------------------------------------------------------
 392          */
 393         WID_TX_POWER_LEVEL_11A          = 0x0018,
 394
 395         /*
 396          *  Group Key Update Policy Selection
 397          *  -----------------------------------------------------------
 398          *  Configuration : Disabled timeBased packetBased timePacketBased
 399          *  Values to set :   1            2          3              4
 400          *  -----------------------------------------------------------
 401          */
 402         WID_REKEY_POLICY                = 0x0019,
 403
 404         /*
 405          *  Allow Short Slot
 406          *  -----------------------------------------------------------
 407          *  Configuration : Disallow Short Slot      Allow Short Slot
 408          *          (Enable Only Long Slot) (Enable Short Slot if applicable)
 409          *  Values to set :    0         1
 410          *  -----------------------------------------------------------
 411          */
 412         WID_SHORT_SLOT_ALLOWED          = 0x001A,
 413
 414         WID_PHY_ACTIVE_REG              = 0x001B,
 415
 416         /*
 417          *  11b Tx Power Level
 418          *  -----------------------------------------------------------
 419          *  Configuration : Sets TX Power (Higher the value greater the power)
 420          *  Values to set : Any value between 0 and 63 (inclusive Default 48)
 421          *  -----------------------------------------------------------
 422          */
 423         WID_TX_POWER_LEVEL_11B          = 0x001D,
 424
 425         /*
 426          *  Scan Request
 427          *  -----------------------------------------------------------
 428          *  Configuration : Request default scan
 429          *  Values to set : 0
 430          *  -----------------------------------------------------------
 431          */
 432         WID_START_SCAN_REQ              = 0x001E,
 433
 434         /*
 435          *  Rssi (get only)
 436          *  -----------------------------------------------------------
 437          *  Configuration :
 438          *  Values to get : Rssi value
 439          *  -----------------------------------------------------------
 440          */
 441         WID_RSSI                        = 0x001F,
 442
 443         /*
 444          * Join Request
 445          *  -----------------------------------------------------------
 446          *  Configuration : Request to join
 447          *  Values to set : index of scan result
 448          *  -----------------------------------------------------------
 449          */
 450         WID_JOIN_REQ                    = 0x0020,
 451
 452         WID_LINKSPEED                   = 0x0026,
 453
 454         /*
 455          *  Enable User Control of TX Power
 456          *  -----------------------------------------------------------
 457          *  Configuration : Disable                  Enable
 458          *  Values to set :    0                       1
 459          *  -----------------------------------------------------------
 460          */
 461         WID_USER_CONTROL_ON_TX_POWER    = 0x0027,
 462
 463         WID_MEMORY_ACCESS_8BIT          = 0x0029,
 464
 465         /*
 466          *  Enable Auto RX Sensitivity feature
 467          *  -----------------------------------------------------------
 468          *  Configuration : Disable                  Enable
 469          *  Values to set :    0                       1
 470          *  -----------------------------------------------------------
 471          */
 472         WID_AUTO_RX_SENSITIVITY         = 0x0032,
 473
 474         /*
 475          *  Receive Buffer Based Ack
 476          *  -----------------------------------------------------------
 477          *  Configuration : Disable                  Enable
 478          *  Values to set :    0                       1
 479          *  -----------------------------------------------------------
 480          */
 481         WID_DATAFLOW_CONTROL            = 0x0033,
 482
 483         /*
 484          *  Scan Filter
 485          *  -----------------------------------------------------------
 486          *  Configuration : Class       No filter   AP only   Station Only
 487          *  Values to set :                0           1           2
 488          *  Configuration : Priority    High Rssi   Low Rssi     Detect
 489          *  Values to set :                0          0x4         0x0
 490          *  Configuration : Channel     filter off  filter on
 491          *  Values to set :                0          0x10
 492          *  -----------------------------------------------------------
 493          */
 494         WID_SCAN_FILTER                 = 0x0036,
 495
 496         /*
 497          *  Link Loss Threshold (measure in the beacon period)
 498          *  -----------------------------------------------------------
 499          *  Configuration : Any value between 10 and 254(Set to 255 disable)
 500          *  Values to set : Same value. Default is 10
 501          *  -----------------------------------------------------------
 502          */
 503         WID_LINK_LOSS_THRESHOLD         = 0x0037,
 504
 505         WID_ABORT_RUNNING_SCAN          = 0x003E,
 506
 507         /* NMAC Character WID list */
 508         WID_WPS_START                   = 0x0043,
 509
 510         /*
 511          *  Protection mode for MAC
 512          *  -----------------------------------------------------------
 513          *  Configuration :  Auto  No protection  ERP    HT    GF
 514          *  Values to set :  0     1              2      3     4
 515          *  -----------------------------------------------------------
 516          */
 517         WID_11N_PROT_MECH               = 0x0080,
 518
 519         /*
 520          *  ERP Protection type for MAC
 521          *  -----------------------------------------------------------
 522          *  Configuration :  Self-CTS   RTS-CTS
 523          *  Values to set :  0          1
 524          *  -----------------------------------------------------------
 525          */
 526         WID_11N_ERP_PROT_TYPE           = 0x0081,
 527
 528         /*
 529          *  HT Option Enable
 530          *  -----------------------------------------------------------
 531          *  Configuration :   HT Enable          HT Disable
 532          *  Values to set :   1                  0
 533          *  -----------------------------------------------------------
 534          */
 535         WID_11N_ENABLE                  = 0x0082,
 536
 537         /*
 538          *  11n Operating mode (Note that 11g operating mode will also be
 539          *  used in addition to this, if this is set to HT Mixed mode)
 540          *  -----------------------------------------------------------
 541          *   Configuration :  HT Mixed  HT Only-20MHz   HT Only-20/40MHz
 542          *  Values to set :     1         2               3
 543          *  -----------------------------------------------------------
 544          */
 545         WID_11N_OPERATING_MODE          = 0x0083,
 546
 547         /*
 548          *  11n OBSS non-HT STA Detection flag
 549          *  -----------------------------------------------------------
 550          *  Configuration :  Do not detect
 551          *  Values to set :  0
 552          *  Configuration :  Detect, do not protect or report
 553          *  Values to set :  1
 554          *  Configuration :  Detect, protect and do not report
 555          *  Values to set :  2
 556          *  Configuration :  Detect, protect and report to other BSS
 557          *  Values to set :  3
 558          *  -----------------------------------------------------------
 559          */
 560         WID_11N_OBSS_NONHT_DETECTION    = 0x0084,
 561
 562         /*
 563          *  11n HT Protection Type
 564          *  -----------------------------------------------------------
 565          *  Configuration :  RTS-CTS   First Frame Exchange at non-HT-rate
 566          *  Values to set :  0         1
 567          *  Configuration :  LSIG TXOP First Frame Exchange in Mixed Fmt
 568          *  Values to set :  2         3
 569          *  -----------------------------------------------------------
 570          */
 571         WID_11N_HT_PROT_TYPE            = 0x0085,
 572
 573         /*
 574          *  11n RIFS Protection Enable Flag
 575          *  -----------------------------------------------------------
 576          *  Configuration :  Disable    Enable
 577          *  Values to set :  0          1
 578          *  -----------------------------------------------------------
 579          */
 580         WID_11N_RIFS_PROT_ENABLE        = 0x0086,
 581
 582         /*
 583          *  SMPS Mode
 584          *  -----------------------------------------------------------
 585          *  Configuration :  Static   Dynamic   MIMO (Power Save Disabled)
 586          *  Values to set :  1        2         3
 587          *  -----------------------------------------------------------
 588          */
 589         WID_11N_SMPS_MODE               = 0x0087,
 590
 591         /*
 592          *  Current transmit MCS
 593          *  -----------------------------------------------------------
 594          *  Configuration :  MCS Index for data rate
 595          *  Values to set :  0 to 7
 596          *  -----------------------------------------------------------
 597          */
 598         WID_11N_CURRENT_TX_MCS          = 0x0088,
 599
 600         WID_11N_PRINT_STATS             = 0x0089,
 601
 602         /*
 603          *  11n Short GI Enable Flag
 604          *  -----------------------------------------------------------
 605          *  Configuration :  Disable    Enable
 606          *  Values to set :  0          1
 607          *  -----------------------------------------------------------
 608          */
 609         WID_11N_SHORT_GI_ENABLE         = 0x008D,
 610
 611         /*
 612          *  11n RIFS Enable Flag
 613          *  -----------------------------------------------------------
 614          *  Configuration :  Disable    Enable
 615          *  Values to set :  0          1
 616          *  -----------------------------------------------------------
 617          */
 618         WID_RIFS_MODE                   = 0x0094,
 619
 620         /*
 621          *  TX Abort Feature
 622          *  -----------------------------------------------------------
 623          *  Configuration :  Disable Self CTS    Enable Self CTS
 624          *  Values to set :             0                      1
 625          *  Configuration :  Disable TX Abort    Enable TX Abort
 626          *  Values to set :             2                      3
 627          *  Configuration :  Enable HW TX Abort Enable SW TX Abort
 628          *  Values to set :             4                      5
 629          *  -----------------------------------------------------------
 630          */
 631         WID_TX_ABORT_CONFIG             = 0x00A1,
 632
 633         WID_REG_TSSI_11B_VALUE          = 0x00A6,
 634         WID_REG_TSSI_11G_VALUE          = 0x00A7,
 635         WID_REG_TSSI_11N_VALUE          = 0x00A8,
 636         WID_TX_CALIBRATION              = 0x00A9,
 637         WID_DSCR_TSSI_11B_VALUE         = 0x00AA,
 638         WID_DSCR_TSSI_11G_VALUE         = 0x00AB,
 639         WID_DSCR_TSSI_11N_VALUE         = 0x00AC,
 640
 641         /*
 642          *  Immediate Block-Ack Support
 643          *  -----------------------------------------------------------
 644          *  Configuration : Disable                  Enable
 645          *  Values to set :    0                       1
 646          *  -----------------------------------------------------------
 647          */
 648         WID_11N_IMMEDIATE_BA_ENABLED    = 0x00AF,
 649
 650         /*
 651          *  TXOP Disable Flag
 652          *  -----------------------------------------------------------
 653          *  Configuration : Disable                  Enable
 654          *  Values to set :    1                        0
 655          *  -----------------------------------------------------------
 656          */
 657         WID_11N_TXOP_PROT_DISABLE       = 0x00B0,
 658
 659         WID_TX_POWER_LEVEL_11N          = 0x00B1,
 660
 661         /* Custom Character WID list */
 662         /* SCAN Complete notification WID*/
 663         WID_SCAN_COMPLETE               = 0x00C9,
 664
 665         WID_DEL_BEACON                  = 0x00CA,
 666
 667         WID_LOG_TERMINAL_SWITCH         = 0x00CD,
 668         WID_TX_POWER                    = 0x00CE,
 669         WID_WOWLAN_TRIGGER              = 0X00CF,
 670         WID_SET_MFP                     = 0x00D0,
 671
 672         WID_DEFAULT_MGMT_KEY_ID         = 0x00D2,
 673         /*  EMAC Short WID list */
 674         /*  RTS Threshold */
 675         /*
 676          *  -----------------------------------------------------------
 677          *  Configuration :   Any value between 256 to 2347
 678          *  Values to set :   Same value. Default is 2347
 679          *  -----------------------------------------------------------
 680          */
 681         WID_RTS_THRESHOLD               = 0x1000,
 682
 683         /*
 684          *  Fragmentation Threshold
 685          *  -----------------------------------------------------------
 686          *  Configuration :   Any value between 256 to 2346
 687          *  Values to set :   Same value. Default is 2346
 688          *  -----------------------------------------------------------
 689          */
 690         WID_FRAG_THRESHOLD              = 0x1001,
 691
 692         WID_SHORT_RETRY_LIMIT           = 0x1002,
 693         WID_LONG_RETRY_LIMIT            = 0x1003,
 694         WID_BEACON_INTERVAL             = 0x1006,
 695         WID_MEMORY_ACCESS_16BIT         = 0x1008,
 696         WID_PASSIVE_SCAN_TIME           = 0x100D,
 697         WID_JOIN_START_TIMEOUT          = 0x100F,
 698         WID_ASOC_TIMEOUT                = 0x1011,
 699         WID_11I_PROTOCOL_TIMEOUT        = 0x1012,
 700         WID_EAPOL_RESPONSE_TIMEOUT      = 0x1013,
 701
 702         /* NMAC Short WID list */
 703         WID_11N_SIG_QUAL_VAL            = 0x1085,
 704         WID_CCA_THRESHOLD               = 0x1087,
 705
 706         /* Custom Short WID list */
 707
 708         /* EMAC Integer WID list */
 709         WID_FAILED_COUNT                = 0x2000,
 710         WID_RETRY_COUNT                 = 0x2001,
 711         WID_MULTIPLE_RETRY_COUNT        = 0x2002,
 712         WID_FRAME_DUPLICATE_COUNT       = 0x2003,
 713         WID_ACK_FAILURE_COUNT           = 0x2004,
 714         WID_RECEIVED_FRAGMENT_COUNT     = 0x2005,
 715         WID_MCAST_RECEIVED_FRAME_COUNT  = 0x2006,
 716         WID_FCS_ERROR_COUNT             = 0x2007,
 717         WID_SUCCESS_FRAME_COUNT         = 0x2008,
 718         WID_HUT_TX_COUNT                = 0x200A,
 719         WID_TX_FRAGMENT_COUNT           = 0x200B,
 720         WID_TX_MULTICAST_FRAME_COUNT    = 0x200C,
 721         WID_RTS_SUCCESS_COUNT           = 0x200D,
 722         WID_RTS_FAILURE_COUNT           = 0x200E,
 723         WID_WEP_UNDECRYPTABLE_COUNT     = 0x200F,
 724         WID_REKEY_PERIOD                = 0x2010,
 725         WID_REKEY_PACKET_COUNT          = 0x2011,
 726         WID_1X_SERV_ADDR                = 0x2012,
 727         WID_STACK_IP_ADDR               = 0x2013,
 728         WID_STACK_NETMASK_ADDR          = 0x2014,
 729         WID_HW_RX_COUNT                 = 0x2015,
 730         WID_MEMORY_ADDRESS              = 0x201E,
 731         WID_MEMORY_ACCESS_32BIT         = 0x201F,
 732
 733         /* NMAC Integer WID list */
 734         /* Custom Integer WID list */
 735         WID_GET_INACTIVE_TIME           = 0x2084,
 736         /* EMAC String WID list */
 737         WID_SSID                        = 0x3000,
 738         WID_FIRMWARE_VERSION            = 0x3001,
 739         WID_OPERATIONAL_RATE_SET        = 0x3002,
 740         WID_BSSID                       = 0x3003,
 741         WID_WEP_KEY_VALUE               = 0x3004,
 742         WID_11I_PSK                     = 0x3008,
 743         WID_11E_P_ACTION_REQ            = 0x3009,
 744         WID_1X_KEY                      = 0x300A,
 745         WID_HARDWARE_VERSION            = 0x300B,
 746         WID_MAC_ADDR                    = 0x300C,
 747         WID_HUT_DEST_ADDR               = 0x300D,
 748         WID_PHY_VERSION                 = 0x300F,
 749         WID_SUPP_USERNAME               = 0x3010,
 750         WID_SUPP_PASSWORD               = 0x3011,
 751         WID_SITE_SURVEY_RESULTS         = 0x3012,
 752         WID_RX_POWER_LEVEL              = 0x3013,
 753         WID_SET_STA_MAC_INACTIVE_TIME   = 0x3017,
 754         WID_ADD_WEP_KEY                 = 0x3019,
 755         WID_REMOVE_WEP_KEY              = 0x301A,
 756         WID_ADD_PTK                     = 0x301B,
 757         WID_ADD_RX_GTK                  = 0x301C,
 758         WID_ADD_TX_GTK                  = 0x301D,
 759         WID_REMOVE_KEY                  = 0x301E,
 760         WID_ASSOC_REQ_INFO              = 0x301F,
 761         WID_ASSOC_RES_INFO              = 0x3020,
 762         WID_ADD_IGTK                    = 0x3022,
 763         WID_MANUFACTURER                = 0x3026, /* Added for CAPI tool */
 764         WID_MODEL_NAME                  = 0x3027, /* Added for CAPI tool */
 765         WID_MODEL_NUM                   = 0x3028, /* Added for CAPI tool */
 766         WID_DEVICE_NAME                 = 0x3029, /* Added for CAPI tool */
 767
 768         /* NMAC String WID list */
 769         WID_SET_OPERATION_MODE          = 0x3079,
 770         WID_11N_P_ACTION_REQ            = 0x3080,
 771         WID_HUT_TEST_ID                 = 0x3081,
 772         WID_PMKID_INFO                  = 0x3082,
 773         WID_FIRMWARE_INFO               = 0x3083,
 774         WID_REGISTER_FRAME              = 0x3084,
 775         WID_DEL_ALL_STA                 = 0x3085,
 776         WID_REMAIN_ON_CHAN              = 0x3996,
 777         WID_SSID_PROBE_REQ              = 0x3997,
 778         WID_JOIN_REQ_EXTENDED           = 0x3998,
 779
 780         WID_IP_ADDRESS                  = 0x3999,
 781
 782         /* Custom String WID list */
 783
 784         /* EMAC Binary WID list */
 785         WID_UAPSD_CONFIG                = 0x4001,
 786         WID_UAPSD_STATUS                = 0x4002,
 787         WID_WMM_AP_AC_PARAMS            = 0x4003,
 788         WID_WMM_STA_AC_PARAMS           = 0x4004,
 789         WID_NETWORK_INFO                = 0x4005,
 790         WID_STA_JOIN_INFO               = 0x4006,
 791         WID_CONNECTED_STA_LIST          = 0x4007,
 792
 793         /* NMAC Binary WID list */
 794         WID_11N_AUTORATE_TABLE          = 0x4080,
 795
 796         WID_SCAN_CHANNEL_LIST           = 0x4084,
 797
 798         WID_INFO_ELEMENT_PROBE          = 0x4085,
 799         WID_INFO_ELEMENT_ASSOCIATE      = 0x4086,
 800         WID_ADD_STA                     = 0X4087,
 801         WID_REMOVE_STA                  = 0X4088,
 802         WID_EDIT_STA                    = 0X4089,
 803         WID_ADD_BEACON                  = 0x408a,
 804
 805         WID_SETUP_MULTICAST_FILTER      = 0x408b,
 806         WID_EXTERNAL_AUTH_PARAM         = 0x408d,
 807         /* Miscellaneous WIDs */
 808         WID_ALL                         = 0x7FFE,
 809         WID_MAX                         = 0xFFFF
 810 };
 811
 812 #endif