1 /******************************************************************************
5 * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *****************************************************************************/
28 #include <linux/slab.h>
29 #include <linux/types.h>
30 #include <linux/etherdevice.h>
31 #include <net/mac80211.h>
33 #include "iwl-eeprom.h"
38 #include "iwl-helpers.h"
40 /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
41 * sending probe req. This should be set long enough to hear probe responses
42 * from more than one AP. */
43 #define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */
44 #define IWL_ACTIVE_DWELL_TIME_52 (20)
46 #define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
47 #define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
49 /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
50 * Must be set longer than active dwell time.
51 * For the most reliable scan, set > AP beacon interval (typically 100msec). */
52 #define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
53 #define IWL_PASSIVE_DWELL_TIME_52 (10)
54 #define IWL_PASSIVE_DWELL_BASE (100)
55 #define IWL_CHANNEL_TUNE_TIME 5
57 static int iwl_send_scan_abort(struct iwl_priv *priv)
60 struct iwl_rx_packet *pkt;
61 struct iwl_host_cmd cmd = {
62 .id = REPLY_SCAN_ABORT_CMD,
63 .flags = CMD_WANT_SKB,
66 /* Exit instantly with error when device is not ready
67 * to receive scan abort command or it does not perform
68 * hardware scan currently */
69 if (!test_bit(STATUS_READY, &priv->status) ||
70 !test_bit(STATUS_GEO_CONFIGURED, &priv->status) ||
71 !test_bit(STATUS_SCAN_HW, &priv->status) ||
72 test_bit(STATUS_FW_ERROR, &priv->status) ||
73 test_bit(STATUS_EXIT_PENDING, &priv->status))
76 ret = iwl_send_cmd_sync(priv, &cmd);
80 pkt = (struct iwl_rx_packet *)cmd.reply_page;
81 if (pkt->u.status != CAN_ABORT_STATUS) {
82 /* The scan abort will return 1 for success or
83 * 2 for "failure". A failure condition can be
84 * due to simply not being in an active scan which
85 * can occur if we send the scan abort before we
86 * the microcode has notified us that a scan is
88 IWL_DEBUG_SCAN(priv, "SCAN_ABORT ret %d.\n", pkt->u.status);
92 iwl_free_pages(priv, cmd.reply_page);
96 static void iwl_complete_scan(struct iwl_priv *priv, bool aborted)
98 /* check if scan was requested from mac80211 */
99 if (priv->scan_request) {
100 IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n");
101 ieee80211_scan_completed(priv->hw, aborted);
104 priv->is_internal_short_scan = false;
105 priv->scan_vif = NULL;
106 priv->scan_request = NULL;
109 void iwl_force_scan_end(struct iwl_priv *priv)
111 lockdep_assert_held(&priv->mutex);
113 if (!test_bit(STATUS_SCANNING, &priv->status)) {
114 IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n");
118 IWL_DEBUG_SCAN(priv, "Forcing scan end\n");
119 clear_bit(STATUS_SCANNING, &priv->status);
120 clear_bit(STATUS_SCAN_HW, &priv->status);
121 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
122 iwl_complete_scan(priv, true);
124 EXPORT_SYMBOL(iwl_force_scan_end);
126 static void iwl_do_scan_abort(struct iwl_priv *priv)
130 lockdep_assert_held(&priv->mutex);
132 if (!test_bit(STATUS_SCANNING, &priv->status)) {
133 IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n");
137 if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) {
138 IWL_DEBUG_SCAN(priv, "Scan abort in progress\n");
142 ret = iwl_send_scan_abort(priv);
144 IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret);
145 iwl_force_scan_end(priv);
147 IWL_DEBUG_SCAN(priv, "Sucessfully send scan abort\n");
151 * iwl_scan_cancel - Cancel any currently executing HW scan
153 int iwl_scan_cancel(struct iwl_priv *priv)
155 IWL_DEBUG_SCAN(priv, "Queuing abort scan\n");
156 queue_work(priv->workqueue, &priv->abort_scan);
159 EXPORT_SYMBOL(iwl_scan_cancel);
162 * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
163 * @ms: amount of time to wait (in milliseconds) for scan to abort
166 int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
168 unsigned long timeout = jiffies + msecs_to_jiffies(ms);
170 lockdep_assert_held(&priv->mutex);
172 IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n");
174 iwl_do_scan_abort(priv);
176 while (time_before_eq(jiffies, timeout)) {
177 if (!test_bit(STATUS_SCAN_HW, &priv->status))
182 return test_bit(STATUS_SCAN_HW, &priv->status);
184 EXPORT_SYMBOL(iwl_scan_cancel_timeout);
186 /* Service response to REPLY_SCAN_CMD (0x80) */
187 static void iwl_rx_reply_scan(struct iwl_priv *priv,
188 struct iwl_rx_mem_buffer *rxb)
190 #ifdef CONFIG_IWLWIFI_DEBUG
191 struct iwl_rx_packet *pkt = rxb_addr(rxb);
192 struct iwl_scanreq_notification *notif =
193 (struct iwl_scanreq_notification *)pkt->u.raw;
195 IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status);
199 /* Service SCAN_START_NOTIFICATION (0x82) */
200 static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
201 struct iwl_rx_mem_buffer *rxb)
203 struct iwl_rx_packet *pkt = rxb_addr(rxb);
204 struct iwl_scanstart_notification *notif =
205 (struct iwl_scanstart_notification *)pkt->u.raw;
206 priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
207 IWL_DEBUG_SCAN(priv, "Scan start: "
209 "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
211 notif->band ? "bg" : "a",
212 le32_to_cpu(notif->tsf_high),
213 le32_to_cpu(notif->tsf_low),
214 notif->status, notif->beacon_timer);
217 /* Service SCAN_RESULTS_NOTIFICATION (0x83) */
218 static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
219 struct iwl_rx_mem_buffer *rxb)
221 #ifdef CONFIG_IWLWIFI_DEBUG
222 struct iwl_rx_packet *pkt = rxb_addr(rxb);
223 struct iwl_scanresults_notification *notif =
224 (struct iwl_scanresults_notification *)pkt->u.raw;
226 IWL_DEBUG_SCAN(priv, "Scan ch.res: "
228 "(TSF: 0x%08X:%08X) - %d "
229 "elapsed=%lu usec\n",
231 notif->band ? "bg" : "a",
232 le32_to_cpu(notif->tsf_high),
233 le32_to_cpu(notif->tsf_low),
234 le32_to_cpu(notif->statistics[0]),
235 le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf);
239 /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
240 static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
241 struct iwl_rx_mem_buffer *rxb)
243 struct iwl_rx_packet *pkt = rxb_addr(rxb);
244 struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
246 IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
247 scan_notif->scanned_channels,
249 scan_notif->tsf_high, scan_notif->status);
251 /* The HW is no longer scanning */
252 clear_bit(STATUS_SCAN_HW, &priv->status);
254 IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n",
255 (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
256 jiffies_to_msecs(elapsed_jiffies
257 (priv->scan_start, jiffies)));
259 queue_work(priv->workqueue, &priv->scan_completed);
261 if (priv->iw_mode != NL80211_IFTYPE_ADHOC &&
262 priv->cfg->bt_params &&
263 priv->cfg->bt_params->advanced_bt_coexist &&
264 priv->bt_status != scan_notif->bt_status) {
265 if (scan_notif->bt_status) {
267 if (!priv->bt_ch_announce)
268 priv->bt_traffic_load =
269 IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
271 * otherwise, no traffic load information provided
276 priv->bt_traffic_load =
277 IWL_BT_COEX_TRAFFIC_LOAD_NONE;
279 priv->bt_status = scan_notif->bt_status;
280 queue_work(priv->workqueue, &priv->bt_traffic_change_work);
284 void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
287 priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan;
288 priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif;
289 priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
290 iwl_rx_scan_results_notif;
291 priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
292 iwl_rx_scan_complete_notif;
294 EXPORT_SYMBOL(iwl_setup_rx_scan_handlers);
296 inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
297 enum ieee80211_band band,
300 if (band == IEEE80211_BAND_5GHZ)
301 return IWL_ACTIVE_DWELL_TIME_52 +
302 IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
304 return IWL_ACTIVE_DWELL_TIME_24 +
305 IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
307 EXPORT_SYMBOL(iwl_get_active_dwell_time);
309 u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
310 enum ieee80211_band band,
311 struct ieee80211_vif *vif)
313 struct iwl_rxon_context *ctx;
314 u16 passive = (band == IEEE80211_BAND_2GHZ) ?
315 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
316 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
318 if (iwl_is_any_associated(priv)) {
320 * If we're associated, we clamp the maximum passive
321 * dwell time to be 98% of the smallest beacon interval
322 * (minus 2 * channel tune time)
324 for_each_context(priv, ctx) {
327 if (!iwl_is_associated_ctx(ctx))
329 value = ctx->vif ? ctx->vif->bss_conf.beacon_int : 0;
330 if ((value > IWL_PASSIVE_DWELL_BASE) || !value)
331 value = IWL_PASSIVE_DWELL_BASE;
332 value = (value * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
333 passive = min(value, passive);
339 EXPORT_SYMBOL(iwl_get_passive_dwell_time);
341 void iwl_init_scan_params(struct iwl_priv *priv)
343 u8 ant_idx = fls(priv->hw_params.valid_tx_ant) - 1;
344 if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ])
345 priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx;
346 if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
347 priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
349 EXPORT_SYMBOL(iwl_init_scan_params);
351 static int __must_check iwl_scan_initiate(struct iwl_priv *priv,
352 struct ieee80211_vif *vif,
354 enum ieee80211_band band)
358 lockdep_assert_held(&priv->mutex);
360 if (WARN_ON(!priv->cfg->ops->utils->request_scan))
363 cancel_delayed_work(&priv->scan_check);
365 if (!iwl_is_ready_rf(priv)) {
366 IWL_WARN(priv, "Request scan called when driver not ready.\n");
370 if (test_bit(STATUS_SCAN_HW, &priv->status)) {
372 "Multiple concurrent scan requests in parallel.\n");
376 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
377 IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n");
381 IWL_DEBUG_SCAN(priv, "Starting %sscan...\n",
382 internal ? "internal short " : "");
384 set_bit(STATUS_SCANNING, &priv->status);
385 priv->is_internal_short_scan = internal;
386 priv->scan_start = jiffies;
387 priv->scan_band = band;
389 ret = priv->cfg->ops->utils->request_scan(priv, vif);
391 clear_bit(STATUS_SCANNING, &priv->status);
392 priv->is_internal_short_scan = false;
396 queue_delayed_work(priv->workqueue, &priv->scan_check,
397 IWL_SCAN_CHECK_WATCHDOG);
402 int iwl_mac_hw_scan(struct ieee80211_hw *hw,
403 struct ieee80211_vif *vif,
404 struct cfg80211_scan_request *req)
406 struct iwl_priv *priv = hw->priv;
409 IWL_DEBUG_MAC80211(priv, "enter\n");
411 if (req->n_channels == 0)
414 mutex_lock(&priv->mutex);
416 if (test_bit(STATUS_SCANNING, &priv->status) &&
417 !priv->is_internal_short_scan) {
418 IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
423 /* mac80211 will only ask for one band at a time */
424 priv->scan_request = req;
425 priv->scan_vif = vif;
428 * If an internal scan is in progress, just set
429 * up the scan_request as per above.
431 if (priv->is_internal_short_scan) {
432 IWL_DEBUG_SCAN(priv, "SCAN request during internal scan\n");
435 ret = iwl_scan_initiate(priv, vif, false,
436 req->channels[0]->band);
438 IWL_DEBUG_MAC80211(priv, "leave\n");
441 mutex_unlock(&priv->mutex);
445 EXPORT_SYMBOL(iwl_mac_hw_scan);
448 * internal short scan, this function should only been called while associated.
449 * It will reset and tune the radio to prevent possible RF related problem
451 void iwl_internal_short_hw_scan(struct iwl_priv *priv)
453 queue_work(priv->workqueue, &priv->start_internal_scan);
456 static void iwl_bg_start_internal_scan(struct work_struct *work)
458 struct iwl_priv *priv =
459 container_of(work, struct iwl_priv, start_internal_scan);
461 IWL_DEBUG_SCAN(priv, "Start internal scan\n");
463 mutex_lock(&priv->mutex);
465 if (priv->is_internal_short_scan == true) {
466 IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n");
470 if (test_bit(STATUS_SCANNING, &priv->status)) {
471 IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
475 if (iwl_scan_initiate(priv, NULL, true, priv->band))
476 IWL_DEBUG_SCAN(priv, "failed to start internal short scan\n");
478 mutex_unlock(&priv->mutex);
481 static void iwl_bg_scan_check(struct work_struct *data)
483 struct iwl_priv *priv =
484 container_of(data, struct iwl_priv, scan_check.work);
486 IWL_DEBUG_SCAN(priv, "Scan check work\n");
488 /* Since we are here firmware does not finish scan and
489 * most likely is in bad shape, so we don't bother to
490 * send abort command, just force scan complete to mac80211 */
491 mutex_lock(&priv->mutex);
492 iwl_force_scan_end(priv);
493 mutex_unlock(&priv->mutex);
497 * iwl_fill_probe_req - fill in all required fields and IE for probe request
500 u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
501 const u8 *ta, const u8 *ies, int ie_len, int left)
506 /* Make sure there is enough space for the probe request,
507 * two mandatory IEs and the data */
512 frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
513 memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
514 memcpy(frame->sa, ta, ETH_ALEN);
515 memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
521 pos = &frame->u.probe_req.variable[0];
523 /* fill in our indirect SSID IE */
527 *pos++ = WLAN_EID_SSID;
532 if (WARN_ON(left < ie_len))
536 memcpy(pos, ies, ie_len);
542 EXPORT_SYMBOL(iwl_fill_probe_req);
544 static void iwl_bg_abort_scan(struct work_struct *work)
546 struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
548 IWL_DEBUG_SCAN(priv, "Abort scan work\n");
550 /* We keep scan_check work queued in case when firmware will not
551 * report back scan completed notification */
552 mutex_lock(&priv->mutex);
553 iwl_scan_cancel_timeout(priv, 200);
554 mutex_unlock(&priv->mutex);
557 static void iwl_bg_scan_completed(struct work_struct *work)
559 struct iwl_priv *priv =
560 container_of(work, struct iwl_priv, scan_completed);
563 IWL_DEBUG_SCAN(priv, "Completed %sscan.\n",
564 priv->is_internal_short_scan ? "internal short " : "");
566 cancel_delayed_work(&priv->scan_check);
568 mutex_lock(&priv->mutex);
570 aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status);
572 IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n");
574 if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) {
575 IWL_DEBUG_SCAN(priv, "Scan already completed.\n");
579 if (priv->is_internal_short_scan && !aborted) {
582 /* Check if mac80211 requested scan during our internal scan */
583 if (priv->scan_request == NULL)
586 /* If so request a new scan */
587 err = iwl_scan_initiate(priv, priv->scan_vif, false,
588 priv->scan_request->channels[0]->band);
591 "failed to initiate pending scan: %d\n", err);
600 iwl_complete_scan(priv, aborted);
603 /* Can we still talk to firmware ? */
604 if (!iwl_is_ready_rf(priv))
607 /* Since setting the TXPOWER may have been deferred while
608 * performing the scan, fire one off */
609 iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
611 priv->cfg->ops->utils->post_scan(priv);
614 mutex_unlock(&priv->mutex);
617 void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
619 INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
620 INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
621 INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
622 INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
624 EXPORT_SYMBOL(iwl_setup_scan_deferred_work);
626 void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
628 cancel_work_sync(&priv->start_internal_scan);
629 cancel_work_sync(&priv->abort_scan);
630 cancel_work_sync(&priv->scan_completed);
632 if (cancel_delayed_work_sync(&priv->scan_check)) {
633 mutex_lock(&priv->mutex);
634 iwl_force_scan_end(priv);
635 mutex_unlock(&priv->mutex);
638 EXPORT_SYMBOL(iwl_cancel_scan_deferred_work);