drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c

   1 /*
   2  * Copyright (c) 2010 Broadcom Corporation
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #define __UNDEF_NO_VERSION__
  18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  19
  20 #include <linux/etherdevice.h>
  21 #include <linux/sched.h>
  22 #include <linux/firmware.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/module.h>
  25 #include <linux/bcma/bcma.h>
  26 #include <net/mac80211.h>
  27 #include <defs.h>
  28 #include "phy/phy_int.h"
  29 #include "d11.h"
  30 #include "channel.h"
  31 #include "scb.h"
  32 #include "pub.h"
  33 #include "ucode_loader.h"
  34 #include "mac80211_if.h"
  35 #include "main.h"
  36 #include "debug.h"
  37
  38 #define N_TX_QUEUES     4 /* #tx queues on mac80211<->driver interface */
  39 #define BRCMS_FLUSH_TIMEOUT     500 /* msec */
  40
  41 /* Flags we support */
  42 #define MAC_FILTERS (FIF_PROMISC_IN_BSS | \
  43         FIF_ALLMULTI | \
  44         FIF_FCSFAIL | \
  45         FIF_CONTROL | \
  46         FIF_OTHER_BSS | \
  47         FIF_BCN_PRBRESP_PROMISC | \
  48         FIF_PSPOLL)
  49
  50 #define CHAN2GHZ(channel, freqency, chflags)  { \
  51         .band = IEEE80211_BAND_2GHZ, \
  52         .center_freq = (freqency), \
  53         .hw_value = (channel), \
  54         .flags = chflags, \
  55         .max_antenna_gain = 0, \
  56         .max_power = 19, \
  57 }
  58
  59 #define CHAN5GHZ(channel, chflags)  { \
  60         .band = IEEE80211_BAND_5GHZ, \
  61         .center_freq = 5000 + 5*(channel), \
  62         .hw_value = (channel), \
  63         .flags = chflags, \
  64         .max_antenna_gain = 0, \
  65         .max_power = 21, \
  66 }
  67
  68 #define RATE(rate100m, _flags) { \
  69         .bitrate = (rate100m), \
  70         .flags = (_flags), \
  71         .hw_value = (rate100m / 5), \
  72 }
  73
  74 struct firmware_hdr {
  75         __le32 offset;
  76         __le32 len;
  77         __le32 idx;
  78 };
  79
  80 static const char * const brcms_firmwares[MAX_FW_IMAGES] = {
  81         "brcm/bcm43xx",
  82         NULL
  83 };
  84
  85 static int n_adapters_found;
  86
  87 MODULE_AUTHOR("Broadcom Corporation");
  88 MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
  89 MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
  90 MODULE_LICENSE("Dual BSD/GPL");
  91 /* This needs to be adjusted when brcms_firmwares changes */
  92 MODULE_FIRMWARE("brcm/bcm43xx-0.fw");
  93 MODULE_FIRMWARE("brcm/bcm43xx_hdr-0.fw");
  94
  95 /* recognized BCMA Core IDs */
  96 static struct bcma_device_id brcms_coreid_table[] = {
  97         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS),
  98         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS),
  99         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS),
 100         BCMA_CORETABLE_END
 101 };
 102 MODULE_DEVICE_TABLE(bcma, brcms_coreid_table);
 103
 104 #if defined(CONFIG_BRCMDBG)
 105 /*
 106  * Module parameter for setting the debug message level. Available
 107  * flags are specified by the BRCM_DL_* macros in
 108  * drivers/net/wireless/brcm80211/include/defs.h.
 109  */
 110 module_param_named(debug, brcm_msg_level, uint, S_IRUGO | S_IWUSR);
 111 #endif
 112
 113 static struct ieee80211_channel brcms_2ghz_chantable[] = {
 114         CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS),
 115         CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS),
 116         CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS),
 117         CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS),
 118         CHAN2GHZ(5, 2432, 0),
 119         CHAN2GHZ(6, 2437, 0),
 120         CHAN2GHZ(7, 2442, 0),
 121         CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS),
 122         CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS),
 123         CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS),
 124         CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS),
 125         CHAN2GHZ(12, 2467,
 126                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
 127                  IEEE80211_CHAN_NO_HT40PLUS),
 128         CHAN2GHZ(13, 2472,
 129                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
 130                  IEEE80211_CHAN_NO_HT40PLUS),
 131         CHAN2GHZ(14, 2484,
 132                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
 133                  IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
 134                  IEEE80211_CHAN_NO_OFDM)
 135 };
 136
 137 static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
 138         /* UNII-1 */
 139         CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS),
 140         CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
 141         CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
 142         CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
 143         /* UNII-2 */
 144         CHAN5GHZ(52,
 145                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 146                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 147         CHAN5GHZ(56,
 148                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 149                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 150         CHAN5GHZ(60,
 151                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 152                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 153         CHAN5GHZ(64,
 154                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 155                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 156         /* MID */
 157         CHAN5GHZ(100,
 158                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 159                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 160         CHAN5GHZ(104,
 161                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 162                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 163         CHAN5GHZ(108,
 164                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 165                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 166         CHAN5GHZ(112,
 167                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 168                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 169         CHAN5GHZ(116,
 170                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 171                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 172         CHAN5GHZ(120,
 173                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 174                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 175         CHAN5GHZ(124,
 176                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 177                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 178         CHAN5GHZ(128,
 179                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 180                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 181         CHAN5GHZ(132,
 182                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 183                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 184         CHAN5GHZ(136,
 185                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 186                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 187         CHAN5GHZ(140,
 188                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 189                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS |
 190                  IEEE80211_CHAN_NO_HT40MINUS),
 191         /* UNII-3 */
 192         CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
 193         CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),
 194         CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS),
 195         CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS),
 196         CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
 197 };
 198
 199 /*
 200  * The rate table is used for both 2.4G and 5G rates. The
 201  * latter being a subset as it does not support CCK rates.
 202  */
 203 static struct ieee80211_rate legacy_ratetable[] = {
 204         RATE(10, 0),
 205         RATE(20, IEEE80211_RATE_SHORT_PREAMBLE),
 206         RATE(55, IEEE80211_RATE_SHORT_PREAMBLE),
 207         RATE(110, IEEE80211_RATE_SHORT_PREAMBLE),
 208         RATE(60, 0),
 209         RATE(90, 0),
 210         RATE(120, 0),
 211         RATE(180, 0),
 212         RATE(240, 0),
 213         RATE(360, 0),
 214         RATE(480, 0),
 215         RATE(540, 0),
 216 };
 217
 218 static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = {
 219         .band = IEEE80211_BAND_2GHZ,
 220         .channels = brcms_2ghz_chantable,
 221         .n_channels = ARRAY_SIZE(brcms_2ghz_chantable),
 222         .bitrates = legacy_ratetable,
 223         .n_bitrates = ARRAY_SIZE(legacy_ratetable),
 224         .ht_cap = {
 225                    /* from include/linux/ieee80211.h */
 226                    .cap = IEEE80211_HT_CAP_GRN_FLD |
 227                           IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40,
 228                    .ht_supported = true,
 229                    .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 230                    .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 231                    .mcs = {
 232                            /* placeholders for now */
 233                            .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
 234                            .rx_highest = cpu_to_le16(500),
 235                            .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
 236                    }
 237 };
 238
 239 static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = {
 240         .band = IEEE80211_BAND_5GHZ,
 241         .channels = brcms_5ghz_nphy_chantable,
 242         .n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable),
 243         .bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET,
 244         .n_bitrates = ARRAY_SIZE(legacy_ratetable) -
 245                         BRCMS_LEGACY_5G_RATE_OFFSET,
 246         .ht_cap = {
 247                    .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
 248                           IEEE80211_HT_CAP_SGI_40,
 249                    .ht_supported = true,
 250                    .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 251                    .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 252                    .mcs = {
 253                            /* placeholders for now */
 254                            .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
 255                            .rx_highest = cpu_to_le16(500),
 256                            .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
 257                    }
 258 };
 259
 260 /* flags the given rate in rateset as requested */
 261 static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br)
 262 {
 263         u32 i;
 264
 265         for (i = 0; i < rs->count; i++) {
 266                 if (rate != (rs->rates[i] & 0x7f))
 267                         continue;
 268
 269                 if (is_br)
 270                         rs->rates[i] |= BRCMS_RATE_FLAG;
 271                 else
 272                         rs->rates[i] &= BRCMS_RATE_MASK;
 273                 return;
 274         }
 275 }
 276
 277 static void brcms_ops_tx(struct ieee80211_hw *hw,
 278                          struct ieee80211_tx_control *control,
 279                          struct sk_buff *skb)
 280 {
 281         struct brcms_info *wl = hw->priv;
 282         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 283
 284         spin_lock_bh(&wl->lock);
 285         if (!wl->pub->up) {
 286                 brcms_err(wl->wlc->hw->d11core, "ops->tx called while down\n");
 287                 kfree_skb(skb);
 288                 goto done;
 289         }
 290         if (brcms_c_sendpkt_mac80211(wl->wlc, skb, hw))
 291                 tx_info->rate_driver_data[0] = control->sta;
 292  done:
 293         spin_unlock_bh(&wl->lock);
 294 }
 295
 296 static int brcms_ops_start(struct ieee80211_hw *hw)
 297 {
 298         struct brcms_info *wl = hw->priv;
 299         bool blocked;
 300         int err;
 301
 302         ieee80211_wake_queues(hw);
 303         spin_lock_bh(&wl->lock);
 304         blocked = brcms_rfkill_set_hw_state(wl);
 305         spin_unlock_bh(&wl->lock);
 306         if (!blocked)
 307                 wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 308
 309         spin_lock_bh(&wl->lock);
 310         /* avoid acknowledging frames before a non-monitor device is added */
 311         wl->mute_tx = true;
 312
 313         if (!wl->pub->up)
 314                 if (!blocked)
 315                         err = brcms_up(wl);
 316                 else
 317                         err = -ERFKILL;
 318         else
 319                 err = -ENODEV;
 320         spin_unlock_bh(&wl->lock);
 321
 322         if (err != 0)
 323                 brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n",
 324                           __func__, err);
 325         return err;
 326 }
 327
 328 static void brcms_ops_stop(struct ieee80211_hw *hw)
 329 {
 330         struct brcms_info *wl = hw->priv;
 331         int status;
 332
 333         ieee80211_stop_queues(hw);
 334
 335         if (wl->wlc == NULL)
 336                 return;
 337
 338         spin_lock_bh(&wl->lock);
 339         status = brcms_c_chipmatch(wl->wlc->hw->d11core);
 340         spin_unlock_bh(&wl->lock);
 341         if (!status) {
 342                 brcms_err(wl->wlc->hw->d11core,
 343                           "wl: brcms_ops_stop: chipmatch failed\n");
 344                 return;
 345         }
 346
 347         /* put driver in down state */
 348         spin_lock_bh(&wl->lock);
 349         brcms_down(wl);
 350         spin_unlock_bh(&wl->lock);
 351 }
 352
 353 static int
 354 brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 355 {
 356         struct brcms_info *wl = hw->priv;
 357
 358         /* Just STA for now */
 359         if (vif->type != NL80211_IFTYPE_STATION) {
 360                 brcms_err(wl->wlc->hw->d11core,
 361                           "%s: Attempt to add type %d, only STA for now\n",
 362                           __func__, vif->type);
 363                 return -EOPNOTSUPP;
 364         }
 365
 366         spin_lock_bh(&wl->lock);
 367         memcpy(wl->pub->cur_etheraddr, vif->addr, sizeof(vif->addr));
 368         wl->mute_tx = false;
 369         brcms_c_mute(wl->wlc, false);
 370         spin_unlock_bh(&wl->lock);
 371
 372         return 0;
 373 }
 374
 375 static void
 376 brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 377 {
 378 }
 379
 380 static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
 381 {
 382         struct ieee80211_conf *conf = &hw->conf;
 383         struct brcms_info *wl = hw->priv;
 384         struct bcma_device *core = wl->wlc->hw->d11core;
 385         int err = 0;
 386         int new_int;
 387
 388         spin_lock_bh(&wl->lock);
 389         if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
 390                 brcms_c_set_beacon_listen_interval(wl->wlc,
 391                                                    conf->listen_interval);
 392         }
 393         if (changed & IEEE80211_CONF_CHANGE_MONITOR)
 394                 brcms_dbg_info(core, "%s: change monitor mode: %s\n",
 395                                __func__, conf->flags & IEEE80211_CONF_MONITOR ?
 396                                "true" : "false");
 397         if (changed & IEEE80211_CONF_CHANGE_PS)
 398                 brcms_err(core, "%s: change power-save mode: %s (implement)\n",
 399                           __func__, conf->flags & IEEE80211_CONF_PS ?
 400                           "true" : "false");
 401
 402         if (changed & IEEE80211_CONF_CHANGE_POWER) {
 403                 err = brcms_c_set_tx_power(wl->wlc, conf->power_level);
 404                 if (err < 0) {
 405                         brcms_err(core, "%s: Error setting power_level\n",
 406                                   __func__);
 407                         goto config_out;
 408                 }
 409                 new_int = brcms_c_get_tx_power(wl->wlc);
 410                 if (new_int != conf->power_level)
 411                         brcms_err(core,
 412                                   "%s: Power level req != actual, %d %d\n",
 413                                   __func__, conf->power_level,
 414                                   new_int);
 415         }
 416         if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
 417                 if (conf->channel_type == NL80211_CHAN_HT20 ||
 418                     conf->channel_type == NL80211_CHAN_NO_HT)
 419                         err = brcms_c_set_channel(wl->wlc,
 420                                                   conf->channel->hw_value);
 421                 else
 422                         err = -ENOTSUPP;
 423         }
 424         if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 425                 err = brcms_c_set_rate_limit(wl->wlc,
 426                                              conf->short_frame_max_tx_count,
 427                                              conf->long_frame_max_tx_count);
 428
 429  config_out:
 430         spin_unlock_bh(&wl->lock);
 431         return err;
 432 }
 433
 434 static void
 435 brcms_ops_bss_info_changed(struct ieee80211_hw *hw,
 436                         struct ieee80211_vif *vif,
 437                         struct ieee80211_bss_conf *info, u32 changed)
 438 {
 439         struct brcms_info *wl = hw->priv;
 440         struct bcma_device *core = wl->wlc->hw->d11core;
 441
 442         if (changed & BSS_CHANGED_ASSOC) {
 443                 /* association status changed (associated/disassociated)
 444                  * also implies a change in the AID.
 445                  */
 446                 brcms_err(core, "%s: %s: %sassociated\n", KBUILD_MODNAME,
 447                           __func__, info->assoc ? "" : "dis");
 448                 spin_lock_bh(&wl->lock);
 449                 brcms_c_associate_upd(wl->wlc, info->assoc);
 450                 spin_unlock_bh(&wl->lock);
 451         }
 452         if (changed & BSS_CHANGED_ERP_SLOT) {
 453                 s8 val;
 454
 455                 /* slot timing changed */
 456                 if (info->use_short_slot)
 457                         val = 1;
 458                 else
 459                         val = 0;
 460                 spin_lock_bh(&wl->lock);
 461                 brcms_c_set_shortslot_override(wl->wlc, val);
 462                 spin_unlock_bh(&wl->lock);
 463         }
 464
 465         if (changed & BSS_CHANGED_HT) {
 466                 /* 802.11n parameters changed */
 467                 u16 mode = info->ht_operation_mode;
 468
 469                 spin_lock_bh(&wl->lock);
 470                 brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG,
 471                         mode & IEEE80211_HT_OP_MODE_PROTECTION);
 472                 brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF,
 473                         mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
 474                 brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS,
 475                         mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT);
 476                 spin_unlock_bh(&wl->lock);
 477         }
 478         if (changed & BSS_CHANGED_BASIC_RATES) {
 479                 struct ieee80211_supported_band *bi;
 480                 u32 br_mask, i;
 481                 u16 rate;
 482                 struct brcm_rateset rs;
 483                 int error;
 484
 485                 /* retrieve the current rates */
 486                 spin_lock_bh(&wl->lock);
 487                 brcms_c_get_current_rateset(wl->wlc, &rs);
 488                 spin_unlock_bh(&wl->lock);
 489
 490                 br_mask = info->basic_rates;
 491                 bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)];
 492                 for (i = 0; i < bi->n_bitrates; i++) {
 493                         /* convert to internal rate value */
 494                         rate = (bi->bitrates[i].bitrate << 1) / 10;
 495
 496                         /* set/clear basic rate flag */
 497                         brcms_set_basic_rate(&rs, rate, br_mask & 1);
 498                         br_mask >>= 1;
 499                 }
 500
 501                 /* update the rate set */
 502                 spin_lock_bh(&wl->lock);
 503                 error = brcms_c_set_rateset(wl->wlc, &rs);
 504                 spin_unlock_bh(&wl->lock);
 505                 if (error)
 506                         brcms_err(core, "changing basic rates failed: %d\n",
 507                                   error);
 508         }
 509         if (changed & BSS_CHANGED_BEACON_INT) {
 510                 /* Beacon interval changed */
 511                 spin_lock_bh(&wl->lock);
 512                 brcms_c_set_beacon_period(wl->wlc, info->beacon_int);
 513                 spin_unlock_bh(&wl->lock);
 514         }
 515         if (changed & BSS_CHANGED_BSSID) {
 516                 /* BSSID changed, for whatever reason (IBSS and managed mode) */
 517                 spin_lock_bh(&wl->lock);
 518                 brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid);
 519                 spin_unlock_bh(&wl->lock);
 520         }
 521         if (changed & BSS_CHANGED_BEACON)
 522                 /* Beacon data changed, retrieve new beacon (beaconing modes) */
 523                 brcms_err(core, "%s: beacon changed\n", __func__);
 524
 525         if (changed & BSS_CHANGED_BEACON_ENABLED) {
 526                 /* Beaconing should be enabled/disabled (beaconing modes) */
 527                 brcms_err(core, "%s: Beacon enabled: %s\n", __func__,
 528                           info->enable_beacon ? "true" : "false");
 529         }
 530
 531         if (changed & BSS_CHANGED_CQM) {
 532                 /* Connection quality monitor config changed */
 533                 brcms_err(core, "%s: cqm change: threshold %d, hys %d "
 534                           " (implement)\n", __func__, info->cqm_rssi_thold,
 535                           info->cqm_rssi_hyst);
 536         }
 537
 538         if (changed & BSS_CHANGED_IBSS) {
 539                 /* IBSS join status changed */
 540                 brcms_err(core, "%s: IBSS joined: %s (implement)\n",
 541                           __func__, info->ibss_joined ? "true" : "false");
 542         }
 543
 544         if (changed & BSS_CHANGED_ARP_FILTER) {
 545                 /* Hardware ARP filter address list or state changed */
 546                 brcms_err(core, "%s: arp filtering: %d addresses"
 547                           " (implement)\n", __func__, info->arp_addr_cnt);
 548         }
 549
 550         if (changed & BSS_CHANGED_QOS) {
 551                 /*
 552                  * QoS for this association was enabled/disabled.
 553                  * Note that it is only ever disabled for station mode.
 554                  */
 555                 brcms_err(core, "%s: qos enabled: %s (implement)\n",
 556                           __func__, info->qos ? "true" : "false");
 557         }
 558         return;
 559 }
 560
 561 static void
 562 brcms_ops_configure_filter(struct ieee80211_hw *hw,
 563                         unsigned int changed_flags,
 564                         unsigned int *total_flags, u64 multicast)
 565 {
 566         struct brcms_info *wl = hw->priv;
 567         struct bcma_device *core = wl->wlc->hw->d11core;
 568
 569         changed_flags &= MAC_FILTERS;
 570         *total_flags &= MAC_FILTERS;
 571
 572         if (changed_flags & FIF_PROMISC_IN_BSS)
 573                 brcms_dbg_info(core, "FIF_PROMISC_IN_BSS\n");
 574         if (changed_flags & FIF_ALLMULTI)
 575                 brcms_dbg_info(core, "FIF_ALLMULTI\n");
 576         if (changed_flags & FIF_FCSFAIL)
 577                 brcms_dbg_info(core, "FIF_FCSFAIL\n");
 578         if (changed_flags & FIF_CONTROL)
 579                 brcms_dbg_info(core, "FIF_CONTROL\n");
 580         if (changed_flags & FIF_OTHER_BSS)
 581                 brcms_dbg_info(core, "FIF_OTHER_BSS\n");
 582         if (changed_flags & FIF_PSPOLL)
 583                 brcms_dbg_info(core, "FIF_PSPOLL\n");
 584         if (changed_flags & FIF_BCN_PRBRESP_PROMISC)
 585                 brcms_dbg_info(core, "FIF_BCN_PRBRESP_PROMISC\n");
 586
 587         spin_lock_bh(&wl->lock);
 588         brcms_c_mac_promisc(wl->wlc, *total_flags);
 589         spin_unlock_bh(&wl->lock);
 590         return;
 591 }
 592
 593 static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw)
 594 {
 595         struct brcms_info *wl = hw->priv;
 596         spin_lock_bh(&wl->lock);
 597         brcms_c_scan_start(wl->wlc);
 598         spin_unlock_bh(&wl->lock);
 599         return;
 600 }
 601
 602 static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw)
 603 {
 604         struct brcms_info *wl = hw->priv;
 605         spin_lock_bh(&wl->lock);
 606         brcms_c_scan_stop(wl->wlc);
 607         spin_unlock_bh(&wl->lock);
 608         return;
 609 }
 610
 611 static int
 612 brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue,
 613                   const struct ieee80211_tx_queue_params *params)
 614 {
 615         struct brcms_info *wl = hw->priv;
 616
 617         spin_lock_bh(&wl->lock);
 618         brcms_c_wme_setparams(wl->wlc, queue, params, true);
 619         spin_unlock_bh(&wl->lock);
 620
 621         return 0;
 622 }
 623
 624 static int
 625 brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 626                struct ieee80211_sta *sta)
 627 {
 628         struct brcms_info *wl = hw->priv;
 629         struct scb *scb = &wl->wlc->pri_scb;
 630
 631         brcms_c_init_scb(scb);
 632
 633         wl->pub->global_ampdu = &(scb->scb_ampdu);
 634         wl->pub->global_ampdu->scb = scb;
 635         wl->pub->global_ampdu->max_pdu = 16;
 636
 637         /*
 638          * minstrel_ht initiates addBA on our behalf by calling
 639          * ieee80211_start_tx_ba_session()
 640          */
 641         return 0;
 642 }
 643
 644 static int
 645 brcms_ops_ampdu_action(struct ieee80211_hw *hw,
 646                     struct ieee80211_vif *vif,
 647                     enum ieee80211_ampdu_mlme_action action,
 648                     struct ieee80211_sta *sta, u16 tid, u16 *ssn,
 649                     u8 buf_size)
 650 {
 651         struct brcms_info *wl = hw->priv;
 652         struct scb *scb = &wl->wlc->pri_scb;
 653         int status;
 654
 655         if (WARN_ON(scb->magic != SCB_MAGIC))
 656                 return -EIDRM;
 657         switch (action) {
 658         case IEEE80211_AMPDU_RX_START:
 659                 break;
 660         case IEEE80211_AMPDU_RX_STOP:
 661                 break;
 662         case IEEE80211_AMPDU_TX_START:
 663                 spin_lock_bh(&wl->lock);
 664                 status = brcms_c_aggregatable(wl->wlc, tid);
 665                 spin_unlock_bh(&wl->lock);
 666                 if (!status) {
 667                         brcms_err(wl->wlc->hw->d11core,
 668                                   "START: tid %d is not agg\'able\n", tid);
 669                         return -EINVAL;
 670                 }
 671                 ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 672                 break;
 673
 674         case IEEE80211_AMPDU_TX_STOP_CONT:
 675         case IEEE80211_AMPDU_TX_STOP_FLUSH:
 676         case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
 677                 spin_lock_bh(&wl->lock);
 678                 brcms_c_ampdu_flush(wl->wlc, sta, tid);
 679                 spin_unlock_bh(&wl->lock);
 680                 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 681                 break;
 682         case IEEE80211_AMPDU_TX_OPERATIONAL:
 683                 /*
 684                  * BA window size from ADDBA response ('buf_size') defines how
 685                  * many outstanding MPDUs are allowed for the BA stream by
 686                  * recipient and traffic class. 'ampdu_factor' gives maximum
 687                  * AMPDU size.
 688                  */
 689                 spin_lock_bh(&wl->lock);
 690                 brcms_c_ampdu_tx_operational(wl->wlc, tid, buf_size,
 691                         (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 692                          sta->ht_cap.ampdu_factor)) - 1);
 693                 spin_unlock_bh(&wl->lock);
 694                 /* Power save wakeup */
 695                 break;
 696         default:
 697                 brcms_err(wl->wlc->hw->d11core,
 698                           "%s: Invalid command, ignoring\n", __func__);
 699         }
 700
 701         return 0;
 702 }
 703
 704 static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw)
 705 {
 706         struct brcms_info *wl = hw->priv;
 707         bool blocked;
 708
 709         spin_lock_bh(&wl->lock);
 710         blocked = brcms_c_check_radio_disabled(wl->wlc);
 711         spin_unlock_bh(&wl->lock);
 712
 713         wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
 714 }
 715
 716 static bool brcms_tx_flush_completed(struct brcms_info *wl)
 717 {
 718         bool result;
 719
 720         spin_lock_bh(&wl->lock);
 721         result = brcms_c_tx_flush_completed(wl->wlc);
 722         spin_unlock_bh(&wl->lock);
 723         return result;
 724 }
 725
 726 static void brcms_ops_flush(struct ieee80211_hw *hw, bool drop)
 727 {
 728         struct brcms_info *wl = hw->priv;
 729         int ret;
 730
 731         no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");
 732
 733         ret = wait_event_timeout(wl->tx_flush_wq,
 734                                  brcms_tx_flush_completed(wl),
 735                                  msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT));
 736
 737         brcms_dbg_mac80211(wl->wlc->hw->d11core,
 738                            "ret=%d\n", jiffies_to_msecs(ret));
 739 }
 740
 741 static const struct ieee80211_ops brcms_ops = {
 742         .tx = brcms_ops_tx,
 743         .start = brcms_ops_start,
 744         .stop = brcms_ops_stop,
 745         .add_interface = brcms_ops_add_interface,
 746         .remove_interface = brcms_ops_remove_interface,
 747         .config = brcms_ops_config,
 748         .bss_info_changed = brcms_ops_bss_info_changed,
 749         .configure_filter = brcms_ops_configure_filter,
 750         .sw_scan_start = brcms_ops_sw_scan_start,
 751         .sw_scan_complete = brcms_ops_sw_scan_complete,
 752         .conf_tx = brcms_ops_conf_tx,
 753         .sta_add = brcms_ops_sta_add,
 754         .ampdu_action = brcms_ops_ampdu_action,
 755         .rfkill_poll = brcms_ops_rfkill_poll,
 756         .flush = brcms_ops_flush,
 757 };
 758
 759 void brcms_dpc(unsigned long data)
 760 {
 761         struct brcms_info *wl;
 762
 763         wl = (struct brcms_info *) data;
 764
 765         spin_lock_bh(&wl->lock);
 766
 767         /* call the common second level interrupt handler */
 768         if (wl->pub->up) {
 769                 if (wl->resched) {
 770                         unsigned long flags;
 771
 772                         spin_lock_irqsave(&wl->isr_lock, flags);
 773                         brcms_c_intrsupd(wl->wlc);
 774                         spin_unlock_irqrestore(&wl->isr_lock, flags);
 775                 }
 776
 777                 wl->resched = brcms_c_dpc(wl->wlc, true);
 778         }
 779
 780         /* brcms_c_dpc() may bring the driver down */
 781         if (!wl->pub->up)
 782                 goto done;
 783
 784         /* re-schedule dpc */
 785         if (wl->resched)
 786                 tasklet_schedule(&wl->tasklet);
 787         else
 788                 /* re-enable interrupts */
 789                 brcms_intrson(wl);
 790
 791  done:
 792         spin_unlock_bh(&wl->lock);
 793         wake_up(&wl->tx_flush_wq);
 794 }
 795
 796 /*
 797  * Precondition: Since this function is called in brcms_pci_probe() context,
 798  * no locking is required.
 799  */
 800 static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev)
 801 {
 802         int status;
 803         struct device *device = &pdev->dev;
 804         char fw_name[100];
 805         int i;
 806
 807         memset(&wl->fw, 0, sizeof(struct brcms_firmware));
 808         for (i = 0; i < MAX_FW_IMAGES; i++) {
 809                 if (brcms_firmwares[i] == NULL)
 810                         break;
 811                 sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i],
 812                         UCODE_LOADER_API_VER);
 813                 status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
 814                 if (status) {
 815                         wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
 816                                   KBUILD_MODNAME, fw_name);
 817                         return status;
 818                 }
 819                 sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i],
 820                         UCODE_LOADER_API_VER);
 821                 status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
 822                 if (status) {
 823                         wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
 824                                   KBUILD_MODNAME, fw_name);
 825                         return status;
 826                 }
 827                 wl->fw.hdr_num_entries[i] =
 828                     wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr));
 829         }
 830         wl->fw.fw_cnt = i;
 831         return brcms_ucode_data_init(wl, &wl->ucode);
 832 }
 833
 834 /*
 835  * Precondition: Since this function is called in brcms_pci_probe() context,
 836  * no locking is required.
 837  */
 838 static void brcms_release_fw(struct brcms_info *wl)
 839 {
 840         int i;
 841         for (i = 0; i < MAX_FW_IMAGES; i++) {
 842                 release_firmware(wl->fw.fw_bin[i]);
 843                 release_firmware(wl->fw.fw_hdr[i]);
 844         }
 845 }
 846
 847 /**
 848  * This function frees the WL per-device resources.
 849  *
 850  * This function frees resources owned by the WL device pointed to
 851  * by the wl parameter.
 852  *
 853  * precondition: can both be called locked and unlocked
 854  *
 855  */
 856 static void brcms_free(struct brcms_info *wl)
 857 {
 858         struct brcms_timer *t, *next;
 859
 860         /* free ucode data */
 861         if (wl->fw.fw_cnt)
 862                 brcms_ucode_data_free(&wl->ucode);
 863         if (wl->irq)
 864                 free_irq(wl->irq, wl);
 865
 866         /* kill dpc */
 867         tasklet_kill(&wl->tasklet);
 868
 869         if (wl->pub) {
 870                 brcms_debugfs_detach(wl->pub);
 871                 brcms_c_module_unregister(wl->pub, "linux", wl);
 872         }
 873
 874         /* free common resources */
 875         if (wl->wlc) {
 876                 brcms_c_detach(wl->wlc);
 877                 wl->wlc = NULL;
 878                 wl->pub = NULL;
 879         }
 880
 881         /* virtual interface deletion is deferred so we cannot spinwait */
 882
 883         /* wait for all pending callbacks to complete */
 884         while (atomic_read(&wl->callbacks) > 0)
 885                 schedule();
 886
 887         /* free timers */
 888         for (t = wl->timers; t; t = next) {
 889                 next = t->next;
 890 #ifdef DEBUG
 891                 kfree(t->name);
 892 #endif
 893                 kfree(t);
 894         }
 895 }
 896
 897 /*
 898 * called from both kernel as from this kernel module (error flow on attach)
 899 * precondition: perimeter lock is not acquired.
 900 */
 901 static void brcms_remove(struct bcma_device *pdev)
 902 {
 903         struct ieee80211_hw *hw = bcma_get_drvdata(pdev);
 904         struct brcms_info *wl = hw->priv;
 905
 906         if (wl->wlc) {
 907                 wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
 908                 wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 909                 ieee80211_unregister_hw(hw);
 910         }
 911
 912         brcms_free(wl);
 913
 914         bcma_set_drvdata(pdev, NULL);
 915         ieee80211_free_hw(hw);
 916 }
 917
 918 static irqreturn_t brcms_isr(int irq, void *dev_id)
 919 {
 920         struct brcms_info *wl;
 921         irqreturn_t ret = IRQ_NONE;
 922
 923         wl = (struct brcms_info *) dev_id;
 924
 925         spin_lock(&wl->isr_lock);
 926
 927         /* call common first level interrupt handler */
 928         if (brcms_c_isr(wl->wlc)) {
 929                 /* schedule second level handler */
 930                 tasklet_schedule(&wl->tasklet);
 931                 ret = IRQ_HANDLED;
 932         }
 933
 934         spin_unlock(&wl->isr_lock);
 935
 936         return ret;
 937 }
 938
 939 /*
 940  * is called in brcms_pci_probe() context, therefore no locking required.
 941  */
 942 static int ieee_hw_rate_init(struct ieee80211_hw *hw)
 943 {
 944         struct brcms_info *wl = hw->priv;
 945         struct brcms_c_info *wlc = wl->wlc;
 946         struct ieee80211_supported_band *band;
 947         int has_5g = 0;
 948         u16 phy_type;
 949
 950         hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
 951         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
 952
 953         phy_type = brcms_c_get_phy_type(wl->wlc, 0);
 954         if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
 955                 band = &wlc->bandstate[BAND_2G_INDEX]->band;
 956                 *band = brcms_band_2GHz_nphy_template;
 957                 if (phy_type == PHY_TYPE_LCN) {
 958                         /* Single stream */
 959                         band->ht_cap.mcs.rx_mask[1] = 0;
 960                         band->ht_cap.mcs.rx_highest = cpu_to_le16(72);
 961                 }
 962                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
 963         } else {
 964                 return -EPERM;
 965         }
 966
 967         /* Assume all bands use the same phy.  True for 11n devices. */
 968         if (wl->pub->_nbands > 1) {
 969                 has_5g++;
 970                 if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
 971                         band = &wlc->bandstate[BAND_5G_INDEX]->band;
 972                         *band = brcms_band_5GHz_nphy_template;
 973                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
 974                 } else {
 975                         return -EPERM;
 976                 }
 977         }
 978         return 0;
 979 }
 980
 981 /*
 982  * is called in brcms_pci_probe() context, therefore no locking required.
 983  */
 984 static int ieee_hw_init(struct ieee80211_hw *hw)
 985 {
 986         hw->flags = IEEE80211_HW_SIGNAL_DBM
 987             /* | IEEE80211_HW_CONNECTION_MONITOR  What is this? */
 988             | IEEE80211_HW_REPORTS_TX_ACK_STATUS
 989             | IEEE80211_HW_AMPDU_AGGREGATION;
 990
 991         hw->extra_tx_headroom = brcms_c_get_header_len();
 992         hw->queues = N_TX_QUEUES;
 993         hw->max_rates = 2;      /* Primary rate and 1 fallback rate */
 994
 995         /* channel change time is dependent on chip and band  */
 996         hw->channel_change_time = 7 * 1000;
 997         hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 998
 999         hw->rate_control_algorithm = "minstrel_ht";
1000
1001         hw->sta_data_size = 0;
1002         return ieee_hw_rate_init(hw);
1003 }
1004
1005 /**
1006  * attach to the WL device.
1007  *
1008  * Attach to the WL device identified by vendor and device parameters.
1009  * regs is a host accessible memory address pointing to WL device registers.
1010  *
1011  * brcms_attach is not defined as static because in the case where no bus
1012  * is defined, wl_attach will never be called, and thus, gcc will issue
1013  * a warning that this function is defined but not used if we declare
1014  * it as static.
1015  *
1016  *
1017  * is called in brcms_bcma_probe() context, therefore no locking required.
1018  */
1019 static struct brcms_info *brcms_attach(struct bcma_device *pdev)
1020 {
1021         struct brcms_info *wl = NULL;
1022         int unit, err;
1023         struct ieee80211_hw *hw;
1024         u8 perm[ETH_ALEN];
1025
1026         unit = n_adapters_found;
1027         err = 0;
1028
1029         if (unit < 0)
1030                 return NULL;
1031
1032         /* allocate private info */
1033         hw = bcma_get_drvdata(pdev);
1034         if (hw != NULL)
1035                 wl = hw->priv;
1036         if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
1037                 return NULL;
1038         wl->wiphy = hw->wiphy;
1039
1040         atomic_set(&wl->callbacks, 0);
1041
1042         init_waitqueue_head(&wl->tx_flush_wq);
1043
1044         /* setup the bottom half handler */
1045         tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl);
1046
1047         spin_lock_init(&wl->lock);
1048         spin_lock_init(&wl->isr_lock);
1049
1050         /* prepare ucode */
1051         if (brcms_request_fw(wl, pdev) < 0) {
1052                 wiphy_err(wl->wiphy, "%s: Failed to find firmware usually in "
1053                           "%s\n", KBUILD_MODNAME, "/lib/firmware/brcm");
1054                 brcms_release_fw(wl);
1055                 brcms_remove(pdev);
1056                 return NULL;
1057         }
1058
1059         /* common load-time initialization */
1060         wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err);
1061         brcms_release_fw(wl);
1062         if (!wl->wlc) {
1063                 wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
1064                           KBUILD_MODNAME, err);
1065                 goto fail;
1066         }
1067         wl->pub = brcms_c_pub(wl->wlc);
1068
1069         wl->pub->ieee_hw = hw;
1070
1071         /* register our interrupt handler */
1072         if (request_irq(pdev->irq, brcms_isr,
1073                         IRQF_SHARED, KBUILD_MODNAME, wl)) {
1074                 wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit);
1075                 goto fail;
1076         }
1077         wl->irq = pdev->irq;
1078
1079         /* register module */
1080         brcms_c_module_register(wl->pub, "linux", wl, NULL);
1081
1082         if (ieee_hw_init(hw)) {
1083                 wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit,
1084                           __func__);
1085                 goto fail;
1086         }
1087
1088         brcms_c_regd_init(wl->wlc);
1089
1090         memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
1091         if (WARN_ON(!is_valid_ether_addr(perm)))
1092                 goto fail;
1093         SET_IEEE80211_PERM_ADDR(hw, perm);
1094
1095         err = ieee80211_register_hw(hw);
1096         if (err)
1097                 wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status"
1098                           "%d\n", __func__, err);
1099
1100         if (wl->pub->srom_ccode[0] &&
1101             regulatory_hint(wl->wiphy, wl->pub->srom_ccode))
1102                 wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__);
1103
1104         brcms_debugfs_attach(wl->pub);
1105         brcms_debugfs_create_files(wl->pub);
1106         n_adapters_found++;
1107         return wl;
1108
1109 fail:
1110         brcms_free(wl);
1111         return NULL;
1112 }
1113
1114
1115
1116 /**
1117  * determines if a device is a WL device, and if so, attaches it.
1118  *
1119  * This function determines if a device pointed to by pdev is a WL device,
1120  * and if so, performs a brcms_attach() on it.
1121  *
1122  * Perimeter lock is initialized in the course of this function.
1123  */
1124 static int brcms_bcma_probe(struct bcma_device *pdev)
1125 {
1126         struct brcms_info *wl;
1127         struct ieee80211_hw *hw;
1128
1129         dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
1130                  pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
1131                  pdev->irq);
1132
1133         if ((pdev->id.manuf != BCMA_MANUF_BCM) ||
1134             (pdev->id.id != BCMA_CORE_80211))
1135                 return -ENODEV;
1136
1137         hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops);
1138         if (!hw) {
1139                 pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
1140                 return -ENOMEM;
1141         }
1142
1143         SET_IEEE80211_DEV(hw, &pdev->dev);
1144
1145         bcma_set_drvdata(pdev, hw);
1146
1147         memset(hw->priv, 0, sizeof(*wl));
1148
1149         wl = brcms_attach(pdev);
1150         if (!wl) {
1151                 pr_err("%s: brcms_attach failed!\n", __func__);
1152                 return -ENODEV;
1153         }
1154         return 0;
1155 }
1156
1157 static int brcms_suspend(struct bcma_device *pdev)
1158 {
1159         struct brcms_info *wl;
1160         struct ieee80211_hw *hw;
1161
1162         hw = bcma_get_drvdata(pdev);
1163         wl = hw->priv;
1164         if (!wl) {
1165                 pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME,
1166                        __func__);
1167                 return -ENODEV;
1168         }
1169
1170         /* only need to flag hw is down for proper resume */
1171         spin_lock_bh(&wl->lock);
1172         wl->pub->hw_up = false;
1173         spin_unlock_bh(&wl->lock);
1174
1175         brcms_dbg_info(wl->wlc->hw->d11core, "brcms_suspend ok\n");
1176
1177         return 0;
1178 }
1179
1180 static int brcms_resume(struct bcma_device *pdev)
1181 {
1182         return 0;
1183 }
1184
1185 static struct bcma_driver brcms_bcma_driver = {
1186         .name     = KBUILD_MODNAME,
1187         .probe    = brcms_bcma_probe,
1188         .suspend  = brcms_suspend,
1189         .resume   = brcms_resume,
1190         .remove   = brcms_remove,
1191         .id_table = brcms_coreid_table,
1192 };
1193
1194 /**
1195  * This is the main entry point for the brcmsmac driver.
1196  *
1197  * This function is scheduled upon module initialization and
1198  * does the driver registration, which result in brcms_bcma_probe()
1199  * call resulting in the driver bringup.
1200  */
1201 static void brcms_driver_init(struct work_struct *work)
1202 {
1203         int error;
1204
1205         error = bcma_driver_register(&brcms_bcma_driver);
1206         if (error)
1207                 pr_err("%s: register returned %d\n", __func__, error);
1208 }
1209
1210 static DECLARE_WORK(brcms_driver_work, brcms_driver_init);
1211
1212 static int __init brcms_module_init(void)
1213 {
1214         brcms_debugfs_init();
1215         if (!schedule_work(&brcms_driver_work))
1216                 return -EBUSY;
1217
1218         return 0;
1219 }
1220
1221 /**
1222  * This function unloads the brcmsmac driver from the system.
1223  *
1224  * This function unconditionally unloads the brcmsmac driver module from the
1225  * system.
1226  *
1227  */
1228 static void __exit brcms_module_exit(void)
1229 {
1230         cancel_work_sync(&brcms_driver_work);
1231         bcma_driver_unregister(&brcms_bcma_driver);
1232         brcms_debugfs_exit();
1233 }
1234
1235 module_init(brcms_module_init);
1236 module_exit(brcms_module_exit);
1237
1238 /*
1239  * precondition: perimeter lock has been acquired
1240  */
1241 void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif,
1242                          bool state, int prio)
1243 {
1244         brcms_err(wl->wlc->hw->d11core, "Shouldn't be here %s\n", __func__);
1245 }
1246
1247 /*
1248  * precondition: perimeter lock has been acquired
1249  */
1250 void brcms_init(struct brcms_info *wl)
1251 {
1252         brcms_dbg_info(wl->wlc->hw->d11core, "Initializing wl%d\n",
1253                        wl->pub->unit);
1254         brcms_reset(wl);
1255         brcms_c_init(wl->wlc, wl->mute_tx);
1256 }
1257
1258 /*
1259  * precondition: perimeter lock has been acquired
1260  */
1261 uint brcms_reset(struct brcms_info *wl)
1262 {
1263         brcms_dbg_info(wl->wlc->hw->d11core, "Resetting wl%d\n", wl->pub->unit);
1264         brcms_c_reset(wl->wlc);
1265
1266         /* dpc will not be rescheduled */
1267         wl->resched = false;
1268
1269         /* inform publicly that interface is down */
1270         wl->pub->up = false;
1271
1272         return 0;
1273 }
1274
1275 void brcms_fatal_error(struct brcms_info *wl)
1276 {
1277         brcms_err(wl->wlc->hw->d11core, "wl%d: fatal error, reinitializing\n",
1278                   wl->wlc->pub->unit);
1279         brcms_reset(wl);
1280         ieee80211_restart_hw(wl->pub->ieee_hw);
1281 }
1282
1283 /*
1284  * These are interrupt on/off entry points. Disable interrupts
1285  * during interrupt state transition.
1286  */
1287 void brcms_intrson(struct brcms_info *wl)
1288 {
1289         unsigned long flags;
1290
1291         spin_lock_irqsave(&wl->isr_lock, flags);
1292         brcms_c_intrson(wl->wlc);
1293         spin_unlock_irqrestore(&wl->isr_lock, flags);
1294 }
1295
1296 u32 brcms_intrsoff(struct brcms_info *wl)
1297 {
1298         unsigned long flags;
1299         u32 status;
1300
1301         spin_lock_irqsave(&wl->isr_lock, flags);
1302         status = brcms_c_intrsoff(wl->wlc);
1303         spin_unlock_irqrestore(&wl->isr_lock, flags);
1304         return status;
1305 }
1306
1307 void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask)
1308 {
1309         unsigned long flags;
1310
1311         spin_lock_irqsave(&wl->isr_lock, flags);
1312         brcms_c_intrsrestore(wl->wlc, macintmask);
1313         spin_unlock_irqrestore(&wl->isr_lock, flags);
1314 }
1315
1316 /*
1317  * precondition: perimeter lock has been acquired
1318  */
1319 int brcms_up(struct brcms_info *wl)
1320 {
1321         int error = 0;
1322
1323         if (wl->pub->up)
1324                 return 0;
1325
1326         error = brcms_c_up(wl->wlc);
1327
1328         return error;
1329 }
1330
1331 /*
1332  * precondition: perimeter lock has been acquired
1333  */
1334 void brcms_down(struct brcms_info *wl)
1335 {
1336         uint callbacks, ret_val = 0;
1337
1338         /* call common down function */
1339         ret_val = brcms_c_down(wl->wlc);
1340         callbacks = atomic_read(&wl->callbacks) - ret_val;
1341
1342         /* wait for down callbacks to complete */
1343         spin_unlock_bh(&wl->lock);
1344
1345         /* For HIGH_only driver, it's important to actually schedule other work,
1346          * not just spin wait since everything runs at schedule level
1347          */
1348         SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000);
1349
1350         spin_lock_bh(&wl->lock);
1351 }
1352
1353 /*
1354 * precondition: perimeter lock is not acquired
1355  */
1356 static void _brcms_timer(struct work_struct *work)
1357 {
1358         struct brcms_timer *t = container_of(work, struct brcms_timer,
1359                                              dly_wrk.work);
1360
1361         spin_lock_bh(&t->wl->lock);
1362
1363         if (t->set) {
1364                 if (t->periodic) {
1365                         atomic_inc(&t->wl->callbacks);
1366                         ieee80211_queue_delayed_work(t->wl->pub->ieee_hw,
1367                                                      &t->dly_wrk,
1368                                                      msecs_to_jiffies(t->ms));
1369                 } else {
1370                         t->set = false;
1371                 }
1372
1373                 t->fn(t->arg);
1374         }
1375
1376         atomic_dec(&t->wl->callbacks);
1377
1378         spin_unlock_bh(&t->wl->lock);
1379 }
1380
1381 /*
1382  * Adds a timer to the list. Caller supplies a timer function.
1383  * Is called from wlc.
1384  *
1385  * precondition: perimeter lock has been acquired
1386  */
1387 struct brcms_timer *brcms_init_timer(struct brcms_info *wl,
1388                                      void (*fn) (void *arg),
1389                                      void *arg, const char *name)
1390 {
1391         struct brcms_timer *t;
1392
1393         t = kzalloc(sizeof(struct brcms_timer), GFP_ATOMIC);
1394         if (!t)
1395                 return NULL;
1396
1397         INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer);
1398         t->wl = wl;
1399         t->fn = fn;
1400         t->arg = arg;
1401         t->next = wl->timers;
1402         wl->timers = t;
1403
1404 #ifdef DEBUG
1405         t->name = kmalloc(strlen(name) + 1, GFP_ATOMIC);
1406         if (t->name)
1407                 strcpy(t->name, name);
1408 #endif
1409
1410         return t;
1411 }
1412
1413 /*
1414  * adds only the kernel timer since it's going to be more accurate
1415  * as well as it's easier to make it periodic
1416  *
1417  * precondition: perimeter lock has been acquired
1418  */
1419 void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic)
1420 {
1421         struct ieee80211_hw *hw = t->wl->pub->ieee_hw;
1422
1423 #ifdef DEBUG
1424         if (t->set)
1425                 brcms_dbg_info(t->wl->wlc->hw->d11core,
1426                                "%s: Already set. Name: %s, per %d\n",
1427                                __func__, t->name, periodic);
1428 #endif
1429         t->ms = ms;
1430         t->periodic = (bool) periodic;
1431         if (!t->set) {
1432                 t->set = true;
1433                 atomic_inc(&t->wl->callbacks);
1434         }
1435
1436         ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms));
1437 }
1438
1439 /*
1440  * return true if timer successfully deleted, false if still pending
1441  *
1442  * precondition: perimeter lock has been acquired
1443  */
1444 bool brcms_del_timer(struct brcms_timer *t)
1445 {
1446         if (t->set) {
1447                 t->set = false;
1448                 if (!cancel_delayed_work(&t->dly_wrk))
1449                         return false;
1450
1451                 atomic_dec(&t->wl->callbacks);
1452         }
1453
1454         return true;
1455 }
1456
1457 /*
1458  * precondition: perimeter lock has been acquired
1459  */
1460 void brcms_free_timer(struct brcms_timer *t)
1461 {
1462         struct brcms_info *wl = t->wl;
1463         struct brcms_timer *tmp;
1464
1465         /* delete the timer in case it is active */
1466         brcms_del_timer(t);
1467
1468         if (wl->timers == t) {
1469                 wl->timers = wl->timers->next;
1470 #ifdef DEBUG
1471                 kfree(t->name);
1472 #endif
1473                 kfree(t);
1474                 return;
1475
1476         }
1477
1478         tmp = wl->timers;
1479         while (tmp) {
1480                 if (tmp->next == t) {
1481                         tmp->next = t->next;
1482 #ifdef DEBUG
1483                         kfree(t->name);
1484 #endif
1485                         kfree(t);
1486                         return;
1487                 }
1488                 tmp = tmp->next;
1489         }
1490
1491 }
1492
1493 /*
1494  * precondition: perimeter lock has been acquired
1495  */
1496 int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx)
1497 {
1498         int i, entry;
1499         const u8 *pdata;
1500         struct firmware_hdr *hdr;
1501         for (i = 0; i < wl->fw.fw_cnt; i++) {
1502                 hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1503                 for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1504                      entry++, hdr++) {
1505                         u32 len = le32_to_cpu(hdr->len);
1506                         if (le32_to_cpu(hdr->idx) == idx) {
1507                                 pdata = wl->fw.fw_bin[i]->data +
1508                                         le32_to_cpu(hdr->offset);
1509                                 *pbuf = kmemdup(pdata, len, GFP_ATOMIC);
1510                                 if (*pbuf == NULL)
1511                                         goto fail;
1512
1513                                 return 0;
1514                         }
1515                 }
1516         }
1517         brcms_err(wl->wlc->hw->d11core,
1518                   "ERROR: ucode buf tag:%d can not be found!\n", idx);
1519         *pbuf = NULL;
1520 fail:
1521         return -ENODATA;
1522 }
1523
1524 /*
1525  * Precondition: Since this function is called in brcms_bcma_probe() context,
1526  * no locking is required.
1527  */
1528 int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx)
1529 {
1530         int i, entry;
1531         const u8 *pdata;
1532         struct firmware_hdr *hdr;
1533         for (i = 0; i < wl->fw.fw_cnt; i++) {
1534                 hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1535                 for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1536                      entry++, hdr++) {
1537                         if (le32_to_cpu(hdr->idx) == idx) {
1538                                 pdata = wl->fw.fw_bin[i]->data +
1539                                         le32_to_cpu(hdr->offset);
1540                                 if (le32_to_cpu(hdr->len) != 4) {
1541                                         brcms_err(wl->wlc->hw->d11core,
1542                                                   "ERROR: fw hdr len\n");
1543                                         return -ENOMSG;
1544                                 }
1545                                 *n_bytes = le32_to_cpu(*((__le32 *) pdata));
1546                                 return 0;
1547                         }
1548                 }
1549         }
1550         brcms_err(wl->wlc->hw->d11core,
1551                   "ERROR: ucode tag:%d can not be found!\n", idx);
1552         return -ENOMSG;
1553 }
1554
1555 /*
1556  * precondition: can both be called locked and unlocked
1557  */
1558 void brcms_ucode_free_buf(void *p)
1559 {
1560         kfree(p);
1561 }
1562
1563 /*
1564  * checks validity of all firmware images loaded from user space
1565  *
1566  * Precondition: Since this function is called in brcms_bcma_probe() context,
1567  * no locking is required.
1568  */
1569 int brcms_check_firmwares(struct brcms_info *wl)
1570 {
1571         int i;
1572         int entry;
1573         int rc = 0;
1574         const struct firmware *fw;
1575         const struct firmware *fw_hdr;
1576         struct firmware_hdr *ucode_hdr;
1577         for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) {
1578                 fw =  wl->fw.fw_bin[i];
1579                 fw_hdr = wl->fw.fw_hdr[i];
1580                 if (fw == NULL && fw_hdr == NULL) {
1581                         break;
1582                 } else if (fw == NULL || fw_hdr == NULL) {
1583                         wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n",
1584                                   __func__);
1585                         rc = -EBADF;
1586                 } else if (fw_hdr->size % sizeof(struct firmware_hdr)) {
1587                         wiphy_err(wl->wiphy, "%s: non integral fw hdr file "
1588                                 "size %zu/%zu\n", __func__, fw_hdr->size,
1589                                 sizeof(struct firmware_hdr));
1590                         rc = -EBADF;
1591                 } else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) {
1592                         wiphy_err(wl->wiphy, "%s: out of bounds fw file size %zu\n",
1593                                   __func__, fw->size);
1594                         rc = -EBADF;
1595                 } else {
1596                         /* check if ucode section overruns firmware image */
1597                         ucode_hdr = (struct firmware_hdr *)fw_hdr->data;
1598                         for (entry = 0; entry < wl->fw.hdr_num_entries[i] &&
1599                              !rc; entry++, ucode_hdr++) {
1600                                 if (le32_to_cpu(ucode_hdr->offset) +
1601                                     le32_to_cpu(ucode_hdr->len) >
1602                                     fw->size) {
1603                                         wiphy_err(wl->wiphy,
1604                                                   "%s: conflicting bin/hdr\n",
1605                                                   __func__);
1606                                         rc = -EBADF;
1607                                 }
1608                         }
1609                 }
1610         }
1611         if (rc == 0 && wl->fw.fw_cnt != i) {
1612                 wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__,
1613                         wl->fw.fw_cnt);
1614                 rc = -EBADF;
1615         }
1616         return rc;
1617 }
1618
1619 /*
1620  * precondition: perimeter lock has been acquired
1621  */
1622 bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
1623 {
1624         bool blocked = brcms_c_check_radio_disabled(wl->wlc);
1625
1626         spin_unlock_bh(&wl->lock);
1627         wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
1628         if (blocked)
1629                 wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy);
1630         spin_lock_bh(&wl->lock);
1631         return blocked;
1632 }