drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c

   1 /*
   2  * Copyright (c) 2010 Broadcom Corporation
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #include <linux/types.h>
  18 #include <linux/kernel.h>
  19 #include <linux/kthread.h>
  20 #include <linux/printk.h>
  21 #include <linux/pci_ids.h>
  22 #include <linux/netdevice.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/sched.h>
  25 #include <linux/mmc/sdio.h>
  26 #include <linux/mmc/sdio_func.h>
  27 #include <linux/mmc/card.h>
  28 #include <linux/semaphore.h>
  29 #include <linux/firmware.h>
  30 #include <linux/module.h>
  31 #include <linux/bcma/bcma.h>
  32 #include <linux/debugfs.h>
  33 #include <linux/vmalloc.h>
  34 #include <linux/platform_data/brcmfmac-sdio.h>
  35 #include <asm/unaligned.h>
  36 #include <defs.h>
  37 #include <brcmu_wifi.h>
  38 #include <brcmu_utils.h>
  39 #include <brcm_hw_ids.h>
  40 #include <soc.h>
  41 #include "sdio_host.h"
  42 #include "sdio_chip.h"
  43
  44 #define DCMD_RESP_TIMEOUT  2000 /* In milli second */
  45
  46 #ifdef DEBUG
  47
  48 #define BRCMF_TRAP_INFO_SIZE    80
  49
  50 #define CBUF_LEN        (128)
  51
  52 /* Device console log buffer state */
  53 #define CONSOLE_BUFFER_MAX      2024
  54
  55 struct rte_log_le {
  56         __le32 buf;             /* Can't be pointer on (64-bit) hosts */
  57         __le32 buf_size;
  58         __le32 idx;
  59         char *_buf_compat;      /* Redundant pointer for backward compat. */
  60 };
  61
  62 struct rte_console {
  63         /* Virtual UART
  64          * When there is no UART (e.g. Quickturn),
  65          * the host should write a complete
  66          * input line directly into cbuf and then write
  67          * the length into vcons_in.
  68          * This may also be used when there is a real UART
  69          * (at risk of conflicting with
  70          * the real UART).  vcons_out is currently unused.
  71          */
  72         uint vcons_in;
  73         uint vcons_out;
  74
  75         /* Output (logging) buffer
  76          * Console output is written to a ring buffer log_buf at index log_idx.
  77          * The host may read the output when it sees log_idx advance.
  78          * Output will be lost if the output wraps around faster than the host
  79          * polls.
  80          */
  81         struct rte_log_le log_le;
  82
  83         /* Console input line buffer
  84          * Characters are read one at a time into cbuf
  85          * until <CR> is received, then
  86          * the buffer is processed as a command line.
  87          * Also used for virtual UART.
  88          */
  89         uint cbuf_idx;
  90         char cbuf[CBUF_LEN];
  91 };
  92
  93 #endif                          /* DEBUG */
  94 #include <chipcommon.h>
  95
  96 #include "dhd_bus.h"
  97 #include "dhd_dbg.h"
  98 #include "tracepoint.h"
  99
 100 #define TXQLEN          2048    /* bulk tx queue length */
 101 #define TXHI            (TXQLEN - 256)  /* turn on flow control above TXHI */
 102 #define TXLOW           (TXHI - 256)    /* turn off flow control below TXLOW */
 103 #define PRIOMASK        7
 104
 105 #define TXRETRIES       2       /* # of retries for tx frames */
 106
 107 #define BRCMF_RXBOUND   50      /* Default for max rx frames in
 108                                  one scheduling */
 109
 110 #define BRCMF_TXBOUND   20      /* Default for max tx frames in
 111                                  one scheduling */
 112
 113 #define BRCMF_TXMINMAX  1       /* Max tx frames if rx still pending */
 114
 115 #define MEMBLOCK        2048    /* Block size used for downloading
 116                                  of dongle image */
 117 #define MAX_DATA_BUF    (32 * 1024)     /* Must be large enough to hold
 118                                  biggest possible glom */
 119
 120 #define BRCMF_FIRSTREAD (1 << 6)
 121
 122
 123 /* SBSDIO_DEVICE_CTL */
 124
 125 /* 1: device will assert busy signal when receiving CMD53 */
 126 #define SBSDIO_DEVCTL_SETBUSY           0x01
 127 /* 1: assertion of sdio interrupt is synchronous to the sdio clock */
 128 #define SBSDIO_DEVCTL_SPI_INTR_SYNC     0x02
 129 /* 1: mask all interrupts to host except the chipActive (rev 8) */
 130 #define SBSDIO_DEVCTL_CA_INT_ONLY       0x04
 131 /* 1: isolate internal sdio signals, put external pads in tri-state; requires
 132  * sdio bus power cycle to clear (rev 9) */
 133 #define SBSDIO_DEVCTL_PADS_ISO          0x08
 134 /* Force SD->SB reset mapping (rev 11) */
 135 #define SBSDIO_DEVCTL_SB_RST_CTL        0x30
 136 /*   Determined by CoreControl bit */
 137 #define SBSDIO_DEVCTL_RST_CORECTL       0x00
 138 /*   Force backplane reset */
 139 #define SBSDIO_DEVCTL_RST_BPRESET       0x10
 140 /*   Force no backplane reset */
 141 #define SBSDIO_DEVCTL_RST_NOBPRESET     0x20
 142
 143 /* direct(mapped) cis space */
 144
 145 /* MAPPED common CIS address */
 146 #define SBSDIO_CIS_BASE_COMMON          0x1000
 147 /* maximum bytes in one CIS */
 148 #define SBSDIO_CIS_SIZE_LIMIT           0x200
 149 /* cis offset addr is < 17 bits */
 150 #define SBSDIO_CIS_OFT_ADDR_MASK        0x1FFFF
 151
 152 /* manfid tuple length, include tuple, link bytes */
 153 #define SBSDIO_CIS_MANFID_TUPLE_LEN     6
 154
 155 /* intstatus */
 156 #define I_SMB_SW0       (1 << 0)        /* To SB Mail S/W interrupt 0 */
 157 #define I_SMB_SW1       (1 << 1)        /* To SB Mail S/W interrupt 1 */
 158 #define I_SMB_SW2       (1 << 2)        /* To SB Mail S/W interrupt 2 */
 159 #define I_SMB_SW3       (1 << 3)        /* To SB Mail S/W interrupt 3 */
 160 #define I_SMB_SW_MASK   0x0000000f      /* To SB Mail S/W interrupts mask */
 161 #define I_SMB_SW_SHIFT  0       /* To SB Mail S/W interrupts shift */
 162 #define I_HMB_SW0       (1 << 4)        /* To Host Mail S/W interrupt 0 */
 163 #define I_HMB_SW1       (1 << 5)        /* To Host Mail S/W interrupt 1 */
 164 #define I_HMB_SW2       (1 << 6)        /* To Host Mail S/W interrupt 2 */
 165 #define I_HMB_SW3       (1 << 7)        /* To Host Mail S/W interrupt 3 */
 166 #define I_HMB_SW_MASK   0x000000f0      /* To Host Mail S/W interrupts mask */
 167 #define I_HMB_SW_SHIFT  4       /* To Host Mail S/W interrupts shift */
 168 #define I_WR_OOSYNC     (1 << 8)        /* Write Frame Out Of Sync */
 169 #define I_RD_OOSYNC     (1 << 9)        /* Read Frame Out Of Sync */
 170 #define I_PC            (1 << 10)       /* descriptor error */
 171 #define I_PD            (1 << 11)       /* data error */
 172 #define I_DE            (1 << 12)       /* Descriptor protocol Error */
 173 #define I_RU            (1 << 13)       /* Receive descriptor Underflow */
 174 #define I_RO            (1 << 14)       /* Receive fifo Overflow */
 175 #define I_XU            (1 << 15)       /* Transmit fifo Underflow */
 176 #define I_RI            (1 << 16)       /* Receive Interrupt */
 177 #define I_BUSPWR        (1 << 17)       /* SDIO Bus Power Change (rev 9) */
 178 #define I_XMTDATA_AVAIL (1 << 23)       /* bits in fifo */
 179 #define I_XI            (1 << 24)       /* Transmit Interrupt */
 180 #define I_RF_TERM       (1 << 25)       /* Read Frame Terminate */
 181 #define I_WF_TERM       (1 << 26)       /* Write Frame Terminate */
 182 #define I_PCMCIA_XU     (1 << 27)       /* PCMCIA Transmit FIFO Underflow */
 183 #define I_SBINT         (1 << 28)       /* sbintstatus Interrupt */
 184 #define I_CHIPACTIVE    (1 << 29)       /* chip from doze to active state */
 185 #define I_SRESET        (1 << 30)       /* CCCR RES interrupt */
 186 #define I_IOE2          (1U << 31)      /* CCCR IOE2 Bit Changed */
 187 #define I_ERRORS        (I_PC | I_PD | I_DE | I_RU | I_RO | I_XU)
 188 #define I_DMA           (I_RI | I_XI | I_ERRORS)
 189
 190 /* corecontrol */
 191 #define CC_CISRDY               (1 << 0)        /* CIS Ready */
 192 #define CC_BPRESEN              (1 << 1)        /* CCCR RES signal */
 193 #define CC_F2RDY                (1 << 2)        /* set CCCR IOR2 bit */
 194 #define CC_CLRPADSISO           (1 << 3)        /* clear SDIO pads isolation */
 195 #define CC_XMTDATAAVAIL_MODE    (1 << 4)
 196 #define CC_XMTDATAAVAIL_CTRL    (1 << 5)
 197
 198 /* SDA_FRAMECTRL */
 199 #define SFC_RF_TERM     (1 << 0)        /* Read Frame Terminate */
 200 #define SFC_WF_TERM     (1 << 1)        /* Write Frame Terminate */
 201 #define SFC_CRC4WOOS    (1 << 2)        /* CRC error for write out of sync */
 202 #define SFC_ABORTALL    (1 << 3)        /* Abort all in-progress frames */
 203
 204 /* HW frame tag */
 205 #define SDPCM_FRAMETAG_LEN      4       /* 2 bytes len, 2 bytes check val */
 206
 207 /* Total length of frame header for dongle protocol */
 208 #define SDPCM_HDRLEN    (SDPCM_FRAMETAG_LEN + SDPCM_SWHEADER_LEN)
 209 #define SDPCM_RESERVE   (SDPCM_HDRLEN + BRCMF_SDALIGN)
 210
 211 /*
 212  * Software allocation of To SB Mailbox resources
 213  */
 214
 215 /* tosbmailbox bits corresponding to intstatus bits */
 216 #define SMB_NAK         (1 << 0)        /* Frame NAK */
 217 #define SMB_INT_ACK     (1 << 1)        /* Host Interrupt ACK */
 218 #define SMB_USE_OOB     (1 << 2)        /* Use OOB Wakeup */
 219 #define SMB_DEV_INT     (1 << 3)        /* Miscellaneous Interrupt */
 220
 221 /* tosbmailboxdata */
 222 #define SMB_DATA_VERSION_SHIFT  16      /* host protocol version */
 223
 224 /*
 225  * Software allocation of To Host Mailbox resources
 226  */
 227
 228 /* intstatus bits */
 229 #define I_HMB_FC_STATE  I_HMB_SW0       /* Flow Control State */
 230 #define I_HMB_FC_CHANGE I_HMB_SW1       /* Flow Control State Changed */
 231 #define I_HMB_FRAME_IND I_HMB_SW2       /* Frame Indication */
 232 #define I_HMB_HOST_INT  I_HMB_SW3       /* Miscellaneous Interrupt */
 233
 234 /* tohostmailboxdata */
 235 #define HMB_DATA_NAKHANDLED     1       /* retransmit NAK'd frame */
 236 #define HMB_DATA_DEVREADY       2       /* talk to host after enable */
 237 #define HMB_DATA_FC             4       /* per prio flowcontrol update flag */
 238 #define HMB_DATA_FWREADY        8       /* fw ready for protocol activity */
 239
 240 #define HMB_DATA_FCDATA_MASK    0xff000000
 241 #define HMB_DATA_FCDATA_SHIFT   24
 242
 243 #define HMB_DATA_VERSION_MASK   0x00ff0000
 244 #define HMB_DATA_VERSION_SHIFT  16
 245
 246 /*
 247  * Software-defined protocol header
 248  */
 249
 250 /* Current protocol version */
 251 #define SDPCM_PROT_VERSION      4
 252
 253 /* SW frame header */
 254 #define SDPCM_PACKET_SEQUENCE(p)        (((u8 *)p)[0] & 0xff)
 255
 256 #define SDPCM_CHANNEL_MASK              0x00000f00
 257 #define SDPCM_CHANNEL_SHIFT             8
 258 #define SDPCM_PACKET_CHANNEL(p)         (((u8 *)p)[1] & 0x0f)
 259
 260 #define SDPCM_NEXTLEN_OFFSET            2
 261
 262 /* Data Offset from SOF (HW Tag, SW Tag, Pad) */
 263 #define SDPCM_DOFFSET_OFFSET            3       /* Data Offset */
 264 #define SDPCM_DOFFSET_VALUE(p)          (((u8 *)p)[SDPCM_DOFFSET_OFFSET] & 0xff)
 265 #define SDPCM_DOFFSET_MASK              0xff000000
 266 #define SDPCM_DOFFSET_SHIFT             24
 267 #define SDPCM_FCMASK_OFFSET             4       /* Flow control */
 268 #define SDPCM_FCMASK_VALUE(p)           (((u8 *)p)[SDPCM_FCMASK_OFFSET] & 0xff)
 269 #define SDPCM_WINDOW_OFFSET             5       /* Credit based fc */
 270 #define SDPCM_WINDOW_VALUE(p)           (((u8 *)p)[SDPCM_WINDOW_OFFSET] & 0xff)
 271
 272 #define SDPCM_SWHEADER_LEN      8       /* SW header is 64 bits */
 273
 274 /* logical channel numbers */
 275 #define SDPCM_CONTROL_CHANNEL   0       /* Control channel Id */
 276 #define SDPCM_EVENT_CHANNEL     1       /* Asyc Event Indication Channel Id */
 277 #define SDPCM_DATA_CHANNEL      2       /* Data Xmit/Recv Channel Id */
 278 #define SDPCM_GLOM_CHANNEL      3       /* For coalesced packets */
 279 #define SDPCM_TEST_CHANNEL      15      /* Reserved for test/debug packets */
 280
 281 #define SDPCM_SEQUENCE_WRAP     256     /* wrap-around val for 8bit frame seq */
 282
 283 #define SDPCM_GLOMDESC(p)       (((u8 *)p)[1] & 0x80)
 284
 285 /*
 286  * Shared structure between dongle and the host.
 287  * The structure contains pointers to trap or assert information.
 288  */
 289 #define SDPCM_SHARED_VERSION       0x0003
 290 #define SDPCM_SHARED_VERSION_MASK  0x00FF
 291 #define SDPCM_SHARED_ASSERT_BUILT  0x0100
 292 #define SDPCM_SHARED_ASSERT        0x0200
 293 #define SDPCM_SHARED_TRAP          0x0400
 294
 295 /* Space for header read, limit for data packets */
 296 #define MAX_HDR_READ    (1 << 6)
 297 #define MAX_RX_DATASZ   2048
 298
 299 /* Maximum milliseconds to wait for F2 to come up */
 300 #define BRCMF_WAIT_F2RDY        3000
 301
 302 /* Bump up limit on waiting for HT to account for first startup;
 303  * if the image is doing a CRC calculation before programming the PMU
 304  * for HT availability, it could take a couple hundred ms more, so
 305  * max out at a 1 second (1000000us).
 306  */
 307 #undef PMU_MAX_TRANSITION_DLY
 308 #define PMU_MAX_TRANSITION_DLY 1000000
 309
 310 /* Value for ChipClockCSR during initial setup */
 311 #define BRCMF_INIT_CLKCTL1      (SBSDIO_FORCE_HW_CLKREQ_OFF |   \
 312                                         SBSDIO_ALP_AVAIL_REQ)
 313
 314 /* Flags for SDH calls */
 315 #define F2SYNC  (SDIO_REQ_4BYTE | SDIO_REQ_FIXED)
 316
 317 #define BRCMF_SDIO_FW_NAME      "brcm/brcmfmac-sdio.bin"
 318 #define BRCMF_SDIO_NV_NAME      "brcm/brcmfmac-sdio.txt"
 319 MODULE_FIRMWARE(BRCMF_SDIO_FW_NAME);
 320 MODULE_FIRMWARE(BRCMF_SDIO_NV_NAME);
 321
 322 #define BRCMF_IDLE_IMMEDIATE    (-1)    /* Enter idle immediately */
 323 #define BRCMF_IDLE_ACTIVE       0       /* Do not request any SD clock change
 324                                          * when idle
 325                                          */
 326 #define BRCMF_IDLE_INTERVAL     1
 327
 328 #define KSO_WAIT_US 50
 329 #define MAX_KSO_ATTEMPTS (PMU_MAX_TRANSITION_DLY/KSO_WAIT_US)
 330
 331 /*
 332  * Conversion of 802.1D priority to precedence level
 333  */
 334 static uint prio2prec(u32 prio)
 335 {
 336         return (prio == PRIO_8021D_NONE || prio == PRIO_8021D_BE) ?
 337                (prio^2) : prio;
 338 }
 339
 340 #ifdef DEBUG
 341 /* Device console log buffer state */
 342 struct brcmf_console {
 343         uint count;             /* Poll interval msec counter */
 344         uint log_addr;          /* Log struct address (fixed) */
 345         struct rte_log_le log_le;       /* Log struct (host copy) */
 346         uint bufsize;           /* Size of log buffer */
 347         u8 *buf;                /* Log buffer (host copy) */
 348         uint last;              /* Last buffer read index */
 349 };
 350
 351 struct brcmf_trap_info {
 352         __le32          type;
 353         __le32          epc;
 354         __le32          cpsr;
 355         __le32          spsr;
 356         __le32          r0;     /* a1 */
 357         __le32          r1;     /* a2 */
 358         __le32          r2;     /* a3 */
 359         __le32          r3;     /* a4 */
 360         __le32          r4;     /* v1 */
 361         __le32          r5;     /* v2 */
 362         __le32          r6;     /* v3 */
 363         __le32          r7;     /* v4 */
 364         __le32          r8;     /* v5 */
 365         __le32          r9;     /* sb/v6 */
 366         __le32          r10;    /* sl/v7 */
 367         __le32          r11;    /* fp/v8 */
 368         __le32          r12;    /* ip */
 369         __le32          r13;    /* sp */
 370         __le32          r14;    /* lr */
 371         __le32          pc;     /* r15 */
 372 };
 373 #endif                          /* DEBUG */
 374
 375 struct sdpcm_shared {
 376         u32 flags;
 377         u32 trap_addr;
 378         u32 assert_exp_addr;
 379         u32 assert_file_addr;
 380         u32 assert_line;
 381         u32 console_addr;       /* Address of struct rte_console */
 382         u32 msgtrace_addr;
 383         u8 tag[32];
 384         u32 brpt_addr;
 385 };
 386
 387 struct sdpcm_shared_le {
 388         __le32 flags;
 389         __le32 trap_addr;
 390         __le32 assert_exp_addr;
 391         __le32 assert_file_addr;
 392         __le32 assert_line;
 393         __le32 console_addr;    /* Address of struct rte_console */
 394         __le32 msgtrace_addr;
 395         u8 tag[32];
 396         __le32 brpt_addr;
 397 };
 398
 399 /* SDIO read frame info */
 400 struct brcmf_sdio_read {
 401         u8 seq_num;
 402         u8 channel;
 403         u16 len;
 404         u16 len_left;
 405         u16 len_nxtfrm;
 406         u8 dat_offset;
 407 };
 408
 409 /* misc chip info needed by some of the routines */
 410 /* Private data for SDIO bus interaction */
 411 struct brcmf_sdio {
 412         struct brcmf_sdio_dev *sdiodev; /* sdio device handler */
 413         struct chip_info *ci;   /* Chip info struct */
 414         char *vars;             /* Variables (from CIS and/or other) */
 415         uint varsz;             /* Size of variables buffer */
 416
 417         u32 ramsize;            /* Size of RAM in SOCRAM (bytes) */
 418
 419         u32 hostintmask;        /* Copy of Host Interrupt Mask */
 420         atomic_t intstatus;     /* Intstatus bits (events) pending */
 421         atomic_t fcstate;       /* State of dongle flow-control */
 422
 423         uint blocksize;         /* Block size of SDIO transfers */
 424         uint roundup;           /* Max roundup limit */
 425
 426         struct pktq txq;        /* Queue length used for flow-control */
 427         u8 flowcontrol; /* per prio flow control bitmask */
 428         u8 tx_seq;              /* Transmit sequence number (next) */
 429         u8 tx_max;              /* Maximum transmit sequence allowed */
 430
 431         u8 hdrbuf[MAX_HDR_READ + BRCMF_SDALIGN];
 432         u8 *rxhdr;              /* Header of current rx frame (in hdrbuf) */
 433         u8 rx_seq;              /* Receive sequence number (expected) */
 434         struct brcmf_sdio_read cur_read;
 435                                 /* info of current read frame */
 436         bool rxskip;            /* Skip receive (awaiting NAK ACK) */
 437         bool rxpending;         /* Data frame pending in dongle */
 438
 439         uint rxbound;           /* Rx frames to read before resched */
 440         uint txbound;           /* Tx frames to send before resched */
 441         uint txminmax;
 442
 443         struct sk_buff *glomd;  /* Packet containing glomming descriptor */
 444         struct sk_buff_head glom; /* Packet list for glommed superframe */
 445         uint glomerr;           /* Glom packet read errors */
 446
 447         u8 *rxbuf;              /* Buffer for receiving control packets */
 448         uint rxblen;            /* Allocated length of rxbuf */
 449         u8 *rxctl;              /* Aligned pointer into rxbuf */
 450         u8 *rxctl_orig;         /* pointer for freeing rxctl */
 451         uint rxlen;             /* Length of valid data in buffer */
 452         spinlock_t rxctl_lock;  /* protection lock for ctrl frame resources */
 453
 454         u8 sdpcm_ver;   /* Bus protocol reported by dongle */
 455
 456         bool intr;              /* Use interrupts */
 457         bool poll;              /* Use polling */
 458         atomic_t ipend;         /* Device interrupt is pending */
 459         uint spurious;          /* Count of spurious interrupts */
 460         uint pollrate;          /* Ticks between device polls */
 461         uint polltick;          /* Tick counter */
 462
 463 #ifdef DEBUG
 464         uint console_interval;
 465         struct brcmf_console console;   /* Console output polling support */
 466         uint console_addr;      /* Console address from shared struct */
 467 #endif                          /* DEBUG */
 468
 469         uint clkstate;          /* State of sd and backplane clock(s) */
 470         bool activity;          /* Activity flag for clock down */
 471         s32 idletime;           /* Control for activity timeout */
 472         s32 idlecount;  /* Activity timeout counter */
 473         s32 idleclock;  /* How to set bus driver when idle */
 474         bool rxflow_mode;       /* Rx flow control mode */
 475         bool rxflow;            /* Is rx flow control on */
 476         bool alp_only;          /* Don't use HT clock (ALP only) */
 477
 478         u8 *ctrl_frame_buf;
 479         u32 ctrl_frame_len;
 480         bool ctrl_frame_stat;
 481
 482         spinlock_t txqlock;
 483         wait_queue_head_t ctrl_wait;
 484         wait_queue_head_t dcmd_resp_wait;
 485
 486         struct timer_list timer;
 487         struct completion watchdog_wait;
 488         struct task_struct *watchdog_tsk;
 489         bool wd_timer_valid;
 490         uint save_ms;
 491
 492         struct workqueue_struct *brcmf_wq;
 493         struct work_struct datawork;
 494         atomic_t dpc_tskcnt;
 495
 496         const struct firmware *firmware;
 497         u32 fw_ptr;
 498
 499         bool txoff;             /* Transmit flow-controlled */
 500         struct brcmf_sdio_count sdcnt;
 501         bool sr_enabled; /* SaveRestore enabled */
 502         bool sleeping; /* SDIO bus sleeping */
 503 };
 504
 505 /* clkstate */
 506 #define CLK_NONE        0
 507 #define CLK_SDONLY      1
 508 #define CLK_PENDING     2
 509 #define CLK_AVAIL       3
 510
 511 #ifdef DEBUG
 512 static int qcount[NUMPRIO];
 513 static int tx_packets[NUMPRIO];
 514 #endif                          /* DEBUG */
 515
 516 #define DEFAULT_SDIO_DRIVE_STRENGTH     6       /* in milliamps */
 517
 518 #define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL)
 519
 520 /* Retry count for register access failures */
 521 static const uint retry_limit = 2;
 522
 523 /* Limit on rounding up frames */
 524 static const uint max_roundup = 512;
 525
 526 #define ALIGNMENT  4
 527
 528 enum brcmf_sdio_frmtype {
 529         BRCMF_SDIO_FT_NORMAL,
 530         BRCMF_SDIO_FT_SUPER,
 531         BRCMF_SDIO_FT_SUB,
 532 };
 533
 534 static void pkt_align(struct sk_buff *p, int len, int align)
 535 {
 536         uint datalign;
 537         datalign = (unsigned long)(p->data);
 538         datalign = roundup(datalign, (align)) - datalign;
 539         if (datalign)
 540                 skb_pull(p, datalign);
 541         __skb_trim(p, len);
 542 }
 543
 544 /* To check if there's window offered */
 545 static bool data_ok(struct brcmf_sdio *bus)
 546 {
 547         return (u8)(bus->tx_max - bus->tx_seq) != 0 &&
 548                ((u8)(bus->tx_max - bus->tx_seq) & 0x80) == 0;
 549 }
 550
 551 /*
 552  * Reads a register in the SDIO hardware block. This block occupies a series of
 553  * adresses on the 32 bit backplane bus.
 554  */
 555 static int
 556 r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
 557 {
 558         u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
 559         int ret;
 560
 561         *regvar = brcmf_sdio_regrl(bus->sdiodev,
 562                                    bus->ci->c_inf[idx].base + offset, &ret);
 563
 564         return ret;
 565 }
 566
 567 static int
 568 w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
 569 {
 570         u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
 571         int ret;
 572
 573         brcmf_sdio_regwl(bus->sdiodev,
 574                          bus->ci->c_inf[idx].base + reg_offset,
 575                          regval, &ret);
 576
 577         return ret;
 578 }
 579
 580 static int
 581 brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on)
 582 {
 583         u8 wr_val = 0, rd_val, cmp_val, bmask;
 584         int err = 0;
 585         int try_cnt = 0;
 586
 587         brcmf_dbg(TRACE, "Enter\n");
 588
 589         wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 590         /* 1st KSO write goes to AOS wake up core if device is asleep  */
 591         brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 592                          wr_val, &err);
 593         if (err) {
 594                 brcmf_err("SDIO_AOS KSO write error: %d\n", err);
 595                 return err;
 596         }
 597
 598         if (on) {
 599                 /* device WAKEUP through KSO:
 600                  * write bit 0 & read back until
 601                  * both bits 0 (kso bit) & 1 (dev on status) are set
 602                  */
 603                 cmp_val = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK |
 604                           SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK;
 605                 bmask = cmp_val;
 606                 usleep_range(2000, 3000);
 607         } else {
 608                 /* Put device to sleep, turn off KSO */
 609                 cmp_val = 0;
 610                 /* only check for bit0, bit1(dev on status) may not
 611                  * get cleared right away
 612                  */
 613                 bmask = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK;
 614         }
 615
 616         do {
 617                 /* reliable KSO bit set/clr:
 618                  * the sdiod sleep write access is synced to PMU 32khz clk
 619                  * just one write attempt may fail,
 620                  * read it back until it matches written value
 621                  */
 622                 rd_val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 623                                           &err);
 624                 if (((rd_val & bmask) == cmp_val) && !err)
 625                         break;
 626                 brcmf_dbg(SDIO, "KSO wr/rd retry:%d (max: %d) ERR:%x\n",
 627                           try_cnt, MAX_KSO_ATTEMPTS, err);
 628                 udelay(KSO_WAIT_US);
 629                 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 630                                  wr_val, &err);
 631         } while (try_cnt++ < MAX_KSO_ATTEMPTS);
 632
 633         return err;
 634 }
 635
 636 #define PKT_AVAILABLE()         (intstatus & I_HMB_FRAME_IND)
 637
 638 #define HOSTINTMASK             (I_HMB_SW_MASK | I_CHIPACTIVE)
 639
 640 /* Turn backplane clock on or off */
 641 static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 642 {
 643         int err;
 644         u8 clkctl, clkreq, devctl;
 645         unsigned long timeout;
 646
 647         brcmf_dbg(SDIO, "Enter\n");
 648
 649         clkctl = 0;
 650
 651         if (bus->sr_enabled) {
 652                 bus->clkstate = (on ? CLK_AVAIL : CLK_SDONLY);
 653                 return 0;
 654         }
 655
 656         if (on) {
 657                 /* Request HT Avail */
 658                 clkreq =
 659                     bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
 660
 661                 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 662                                  clkreq, &err);
 663                 if (err) {
 664                         brcmf_err("HT Avail request error: %d\n", err);
 665                         return -EBADE;
 666                 }
 667
 668                 /* Check current status */
 669                 clkctl = brcmf_sdio_regrb(bus->sdiodev,
 670                                           SBSDIO_FUNC1_CHIPCLKCSR, &err);
 671                 if (err) {
 672                         brcmf_err("HT Avail read error: %d\n", err);
 673                         return -EBADE;
 674                 }
 675
 676                 /* Go to pending and await interrupt if appropriate */
 677                 if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
 678                         /* Allow only clock-available interrupt */
 679                         devctl = brcmf_sdio_regrb(bus->sdiodev,
 680                                                   SBSDIO_DEVICE_CTL, &err);
 681                         if (err) {
 682                                 brcmf_err("Devctl error setting CA: %d\n",
 683                                           err);
 684                                 return -EBADE;
 685                         }
 686
 687                         devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
 688                         brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 689                                          devctl, &err);
 690                         brcmf_dbg(SDIO, "CLKCTL: set PENDING\n");
 691                         bus->clkstate = CLK_PENDING;
 692
 693                         return 0;
 694                 } else if (bus->clkstate == CLK_PENDING) {
 695                         /* Cancel CA-only interrupt filter */
 696                         devctl = brcmf_sdio_regrb(bus->sdiodev,
 697                                                   SBSDIO_DEVICE_CTL, &err);
 698                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
 699                         brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 700                                          devctl, &err);
 701                 }
 702
 703                 /* Otherwise, wait here (polling) for HT Avail */
 704                 timeout = jiffies +
 705                           msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
 706                 while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
 707                         clkctl = brcmf_sdio_regrb(bus->sdiodev,
 708                                                   SBSDIO_FUNC1_CHIPCLKCSR,
 709                                                   &err);
 710                         if (time_after(jiffies, timeout))
 711                                 break;
 712                         else
 713                                 usleep_range(5000, 10000);
 714                 }
 715                 if (err) {
 716                         brcmf_err("HT Avail request error: %d\n", err);
 717                         return -EBADE;
 718                 }
 719                 if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
 720                         brcmf_err("HT Avail timeout (%d): clkctl 0x%02x\n",
 721                                   PMU_MAX_TRANSITION_DLY, clkctl);
 722                         return -EBADE;
 723                 }
 724
 725                 /* Mark clock available */
 726                 bus->clkstate = CLK_AVAIL;
 727                 brcmf_dbg(SDIO, "CLKCTL: turned ON\n");
 728
 729 #if defined(DEBUG)
 730                 if (!bus->alp_only) {
 731                         if (SBSDIO_ALPONLY(clkctl))
 732                                 brcmf_err("HT Clock should be on\n");
 733                 }
 734 #endif                          /* defined (DEBUG) */
 735
 736                 bus->activity = true;
 737         } else {
 738                 clkreq = 0;
 739
 740                 if (bus->clkstate == CLK_PENDING) {
 741                         /* Cancel CA-only interrupt filter */
 742                         devctl = brcmf_sdio_regrb(bus->sdiodev,
 743                                                   SBSDIO_DEVICE_CTL, &err);
 744                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
 745                         brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 746                                          devctl, &err);
 747                 }
 748
 749                 bus->clkstate = CLK_SDONLY;
 750                 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 751                                  clkreq, &err);
 752                 brcmf_dbg(SDIO, "CLKCTL: turned OFF\n");
 753                 if (err) {
 754                         brcmf_err("Failed access turning clock off: %d\n",
 755                                   err);
 756                         return -EBADE;
 757                 }
 758         }
 759         return 0;
 760 }
 761
 762 /* Change idle/active SD state */
 763 static int brcmf_sdbrcm_sdclk(struct brcmf_sdio *bus, bool on)
 764 {
 765         brcmf_dbg(SDIO, "Enter\n");
 766
 767         if (on)
 768                 bus->clkstate = CLK_SDONLY;
 769         else
 770                 bus->clkstate = CLK_NONE;
 771
 772         return 0;
 773 }
 774
 775 /* Transition SD and backplane clock readiness */
 776 static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
 777 {
 778 #ifdef DEBUG
 779         uint oldstate = bus->clkstate;
 780 #endif                          /* DEBUG */
 781
 782         brcmf_dbg(SDIO, "Enter\n");
 783
 784         /* Early exit if we're already there */
 785         if (bus->clkstate == target) {
 786                 if (target == CLK_AVAIL) {
 787                         brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
 788                         bus->activity = true;
 789                 }
 790                 return 0;
 791         }
 792
 793         switch (target) {
 794         case CLK_AVAIL:
 795                 /* Make sure SD clock is available */
 796                 if (bus->clkstate == CLK_NONE)
 797                         brcmf_sdbrcm_sdclk(bus, true);
 798                 /* Now request HT Avail on the backplane */
 799                 brcmf_sdbrcm_htclk(bus, true, pendok);
 800                 brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
 801                 bus->activity = true;
 802                 break;
 803
 804         case CLK_SDONLY:
 805                 /* Remove HT request, or bring up SD clock */
 806                 if (bus->clkstate == CLK_NONE)
 807                         brcmf_sdbrcm_sdclk(bus, true);
 808                 else if (bus->clkstate == CLK_AVAIL)
 809                         brcmf_sdbrcm_htclk(bus, false, false);
 810                 else
 811                         brcmf_err("request for %d -> %d\n",
 812                                   bus->clkstate, target);
 813                 brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
 814                 break;
 815
 816         case CLK_NONE:
 817                 /* Make sure to remove HT request */
 818                 if (bus->clkstate == CLK_AVAIL)
 819                         brcmf_sdbrcm_htclk(bus, false, false);
 820                 /* Now remove the SD clock */
 821                 brcmf_sdbrcm_sdclk(bus, false);
 822                 brcmf_sdbrcm_wd_timer(bus, 0);
 823                 break;
 824         }
 825 #ifdef DEBUG
 826         brcmf_dbg(SDIO, "%d -> %d\n", oldstate, bus->clkstate);
 827 #endif                          /* DEBUG */
 828
 829         return 0;
 830 }
 831
 832 static int
 833 brcmf_sdbrcm_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 834 {
 835         int err = 0;
 836         brcmf_dbg(TRACE, "Enter\n");
 837         brcmf_dbg(SDIO, "request %s currently %s\n",
 838                   (sleep ? "SLEEP" : "WAKE"),
 839                   (bus->sleeping ? "SLEEP" : "WAKE"));
 840
 841         /* If SR is enabled control bus state with KSO */
 842         if (bus->sr_enabled) {
 843                 /* Done if we're already in the requested state */
 844                 if (sleep == bus->sleeping)
 845                         goto end;
 846
 847                 /* Going to sleep */
 848                 if (sleep) {
 849                         /* Don't sleep if something is pending */
 850                         if (atomic_read(&bus->intstatus) ||
 851                             atomic_read(&bus->ipend) > 0 ||
 852                             (!atomic_read(&bus->fcstate) &&
 853                             brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
 854                             data_ok(bus)))
 855                                  return -EBUSY;
 856                         err = brcmf_sdbrcm_kso_control(bus, false);
 857                         /* disable watchdog */
 858                         if (!err)
 859                                 brcmf_sdbrcm_wd_timer(bus, 0);
 860                 } else {
 861                         bus->idlecount = 0;
 862                         err = brcmf_sdbrcm_kso_control(bus, true);
 863                 }
 864                 if (!err) {
 865                         /* Change state */
 866                         bus->sleeping = sleep;
 867                         brcmf_dbg(SDIO, "new state %s\n",
 868                                   (sleep ? "SLEEP" : "WAKE"));
 869                 } else {
 870                         brcmf_err("error while changing bus sleep state %d\n",
 871                                   err);
 872                         return err;
 873                 }
 874         }
 875
 876 end:
 877         /* control clocks */
 878         if (sleep) {
 879                 if (!bus->sr_enabled)
 880                         brcmf_sdbrcm_clkctl(bus, CLK_NONE, pendok);
 881         } else {
 882                 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, pendok);
 883         }
 884
 885         return err;
 886
 887 }
 888
 889 static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus)
 890 {
 891         u32 intstatus = 0;
 892         u32 hmb_data;
 893         u8 fcbits;
 894         int ret;
 895
 896         brcmf_dbg(SDIO, "Enter\n");
 897
 898         /* Read mailbox data and ack that we did so */
 899         ret = r_sdreg32(bus, &hmb_data,
 900                         offsetof(struct sdpcmd_regs, tohostmailboxdata));
 901
 902         if (ret == 0)
 903                 w_sdreg32(bus, SMB_INT_ACK,
 904                           offsetof(struct sdpcmd_regs, tosbmailbox));
 905         bus->sdcnt.f1regdata += 2;
 906
 907         /* Dongle recomposed rx frames, accept them again */
 908         if (hmb_data & HMB_DATA_NAKHANDLED) {
 909                 brcmf_dbg(SDIO, "Dongle reports NAK handled, expect rtx of %d\n",
 910                           bus->rx_seq);
 911                 if (!bus->rxskip)
 912                         brcmf_err("unexpected NAKHANDLED!\n");
 913
 914                 bus->rxskip = false;
 915                 intstatus |= I_HMB_FRAME_IND;
 916         }
 917
 918         /*
 919          * DEVREADY does not occur with gSPI.
 920          */
 921         if (hmb_data & (HMB_DATA_DEVREADY | HMB_DATA_FWREADY)) {
 922                 bus->sdpcm_ver =
 923                     (hmb_data & HMB_DATA_VERSION_MASK) >>
 924                     HMB_DATA_VERSION_SHIFT;
 925                 if (bus->sdpcm_ver != SDPCM_PROT_VERSION)
 926                         brcmf_err("Version mismatch, dongle reports %d, "
 927                                   "expecting %d\n",
 928                                   bus->sdpcm_ver, SDPCM_PROT_VERSION);
 929                 else
 930                         brcmf_dbg(SDIO, "Dongle ready, protocol version %d\n",
 931                                   bus->sdpcm_ver);
 932         }
 933
 934         /*
 935          * Flow Control has been moved into the RX headers and this out of band
 936          * method isn't used any more.
 937          * remaining backward compatible with older dongles.
 938          */
 939         if (hmb_data & HMB_DATA_FC) {
 940                 fcbits = (hmb_data & HMB_DATA_FCDATA_MASK) >>
 941                                                         HMB_DATA_FCDATA_SHIFT;
 942
 943                 if (fcbits & ~bus->flowcontrol)
 944                         bus->sdcnt.fc_xoff++;
 945
 946                 if (bus->flowcontrol & ~fcbits)
 947                         bus->sdcnt.fc_xon++;
 948
 949                 bus->sdcnt.fc_rcvd++;
 950                 bus->flowcontrol = fcbits;
 951         }
 952
 953         /* Shouldn't be any others */
 954         if (hmb_data & ~(HMB_DATA_DEVREADY |
 955                          HMB_DATA_NAKHANDLED |
 956                          HMB_DATA_FC |
 957                          HMB_DATA_FWREADY |
 958                          HMB_DATA_FCDATA_MASK | HMB_DATA_VERSION_MASK))
 959                 brcmf_err("Unknown mailbox data content: 0x%02x\n",
 960                           hmb_data);
 961
 962         return intstatus;
 963 }
 964
 965 static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 966 {
 967         uint retries = 0;
 968         u16 lastrbc;
 969         u8 hi, lo;
 970         int err;
 971
 972         brcmf_err("%sterminate frame%s\n",
 973                   abort ? "abort command, " : "",
 974                   rtx ? ", send NAK" : "");
 975
 976         if (abort)
 977                 brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
 978
 979         brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
 980                          SFC_RF_TERM, &err);
 981         bus->sdcnt.f1regdata++;
 982
 983         /* Wait until the packet has been flushed (device/FIFO stable) */
 984         for (lastrbc = retries = 0xffff; retries > 0; retries--) {
 985                 hi = brcmf_sdio_regrb(bus->sdiodev,
 986                                       SBSDIO_FUNC1_RFRAMEBCHI, &err);
 987                 lo = brcmf_sdio_regrb(bus->sdiodev,
 988                                       SBSDIO_FUNC1_RFRAMEBCLO, &err);
 989                 bus->sdcnt.f1regdata += 2;
 990
 991                 if ((hi == 0) && (lo == 0))
 992                         break;
 993
 994                 if ((hi > (lastrbc >> 8)) && (lo > (lastrbc & 0x00ff))) {
 995                         brcmf_err("count growing: last 0x%04x now 0x%04x\n",
 996                                   lastrbc, (hi << 8) + lo);
 997                 }
 998                 lastrbc = (hi << 8) + lo;
 999         }
1000
1001         if (!retries)
1002                 brcmf_err("count never zeroed: last 0x%04x\n", lastrbc);
1003         else
1004                 brcmf_dbg(SDIO, "flush took %d iterations\n", 0xffff - retries);
1005
1006         if (rtx) {
1007                 bus->sdcnt.rxrtx++;
1008                 err = w_sdreg32(bus, SMB_NAK,
1009                                 offsetof(struct sdpcmd_regs, tosbmailbox));
1010
1011                 bus->sdcnt.f1regdata++;
1012                 if (err == 0)
1013                         bus->rxskip = true;
1014         }
1015
1016         /* Clear partial in any case */
1017         bus->cur_read.len = 0;
1018
1019         /* If we can't reach the device, signal failure */
1020         if (err)
1021                 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
1022 }
1023
1024 /* return total length of buffer chain */
1025 static uint brcmf_sdbrcm_glom_len(struct brcmf_sdio *bus)
1026 {
1027         struct sk_buff *p;
1028         uint total;
1029
1030         total = 0;
1031         skb_queue_walk(&bus->glom, p)
1032                 total += p->len;
1033         return total;
1034 }
1035
1036 static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus)
1037 {
1038         struct sk_buff *cur, *next;
1039
1040         skb_queue_walk_safe(&bus->glom, cur, next) {
1041                 skb_unlink(cur, &bus->glom);
1042                 brcmu_pkt_buf_free_skb(cur);
1043         }
1044 }
1045
1046 static int brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
1047                                struct brcmf_sdio_read *rd,
1048                                enum brcmf_sdio_frmtype type)
1049 {
1050         u16 len, checksum;
1051         u8 rx_seq, fc, tx_seq_max;
1052
1053         /*
1054          * 4 bytes hardware header (frame tag)
1055          * Byte 0~1: Frame length
1056          * Byte 2~3: Checksum, bit-wise inverse of frame length
1057          */
1058         len = get_unaligned_le16(header);
1059         checksum = get_unaligned_le16(header + sizeof(u16));
1060         /* All zero means no more to read */
1061         if (!(len | checksum)) {
1062                 bus->rxpending = false;
1063                 return -ENODATA;
1064         }
1065         if ((u16)(~(len ^ checksum))) {
1066                 brcmf_err("HW header checksum error\n");
1067                 bus->sdcnt.rx_badhdr++;
1068                 brcmf_sdbrcm_rxfail(bus, false, false);
1069                 return -EIO;
1070         }
1071         if (len < SDPCM_HDRLEN) {
1072                 brcmf_err("HW header length error\n");
1073                 return -EPROTO;
1074         }
1075         if (type == BRCMF_SDIO_FT_SUPER &&
1076             (roundup(len, bus->blocksize) != rd->len)) {
1077                 brcmf_err("HW superframe header length error\n");
1078                 return -EPROTO;
1079         }
1080         if (type == BRCMF_SDIO_FT_SUB && len > rd->len) {
1081                 brcmf_err("HW subframe header length error\n");
1082                 return -EPROTO;
1083         }
1084         rd->len = len;
1085
1086         /*
1087          * 8 bytes hardware header
1088          * Byte 0: Rx sequence number
1089          * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag
1090          * Byte 2: Length of next data frame
1091          * Byte 3: Data offset
1092          * Byte 4: Flow control bits
1093          * Byte 5: Maximum Sequence number allow for Tx
1094          * Byte 6~7: Reserved
1095          */
1096         if (type == BRCMF_SDIO_FT_SUPER &&
1097             SDPCM_GLOMDESC(&header[SDPCM_FRAMETAG_LEN])) {
1098                 brcmf_err("Glom descriptor found in superframe head\n");
1099                 rd->len = 0;
1100                 return -EINVAL;
1101         }
1102         rx_seq = SDPCM_PACKET_SEQUENCE(&header[SDPCM_FRAMETAG_LEN]);
1103         rd->channel = SDPCM_PACKET_CHANNEL(&header[SDPCM_FRAMETAG_LEN]);
1104         if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL &&
1105             type != BRCMF_SDIO_FT_SUPER) {
1106                 brcmf_err("HW header length too long\n");
1107                 bus->sdcnt.rx_toolong++;
1108                 brcmf_sdbrcm_rxfail(bus, false, false);
1109                 rd->len = 0;
1110                 return -EPROTO;
1111         }
1112         if (type == BRCMF_SDIO_FT_SUPER && rd->channel != SDPCM_GLOM_CHANNEL) {
1113                 brcmf_err("Wrong channel for superframe\n");
1114                 rd->len = 0;
1115                 return -EINVAL;
1116         }
1117         if (type == BRCMF_SDIO_FT_SUB && rd->channel != SDPCM_DATA_CHANNEL &&
1118             rd->channel != SDPCM_EVENT_CHANNEL) {
1119                 brcmf_err("Wrong channel for subframe\n");
1120                 rd->len = 0;
1121                 return -EINVAL;
1122         }
1123         rd->dat_offset = SDPCM_DOFFSET_VALUE(&header[SDPCM_FRAMETAG_LEN]);
1124         if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) {
1125                 brcmf_err("seq %d: bad data offset\n", rx_seq);
1126                 bus->sdcnt.rx_badhdr++;
1127                 brcmf_sdbrcm_rxfail(bus, false, false);
1128                 rd->len = 0;
1129                 return -ENXIO;
1130         }
1131         if (rd->seq_num != rx_seq) {
1132                 brcmf_err("seq %d: sequence number error, expect %d\n",
1133                           rx_seq, rd->seq_num);
1134                 bus->sdcnt.rx_badseq++;
1135                 rd->seq_num = rx_seq;
1136         }
1137         /* no need to check the reset for subframe */
1138         if (type == BRCMF_SDIO_FT_SUB)
1139                 return 0;
1140         rd->len_nxtfrm = header[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
1141         if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) {
1142                 /* only warm for NON glom packet */
1143                 if (rd->channel != SDPCM_GLOM_CHANNEL)
1144                         brcmf_err("seq %d: next length error\n", rx_seq);
1145                 rd->len_nxtfrm = 0;
1146         }
1147         fc = SDPCM_FCMASK_VALUE(&header[SDPCM_FRAMETAG_LEN]);
1148         if (bus->flowcontrol != fc) {
1149                 if (~bus->flowcontrol & fc)
1150                         bus->sdcnt.fc_xoff++;
1151                 if (bus->flowcontrol & ~fc)
1152                         bus->sdcnt.fc_xon++;
1153                 bus->sdcnt.fc_rcvd++;
1154                 bus->flowcontrol = fc;
1155         }
1156         tx_seq_max = SDPCM_WINDOW_VALUE(&header[SDPCM_FRAMETAG_LEN]);
1157         if ((u8)(tx_seq_max - bus->tx_seq) > 0x40) {
1158                 brcmf_err("seq %d: max tx seq number error\n", rx_seq);
1159                 tx_seq_max = bus->tx_seq + 2;
1160         }
1161         bus->tx_max = tx_seq_max;
1162
1163         return 0;
1164 }
1165
1166 static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
1167 {
1168         u16 dlen, totlen;
1169         u8 *dptr, num = 0;
1170
1171         u16 sublen;
1172         struct sk_buff *pfirst, *pnext;
1173
1174         int errcode;
1175         u8 doff, sfdoff;
1176
1177         struct brcmf_sdio_read rd_new;
1178
1179         /* If packets, issue read(s) and send up packet chain */
1180         /* Return sequence numbers consumed? */
1181
1182         brcmf_dbg(SDIO, "start: glomd %p glom %p\n",
1183                   bus->glomd, skb_peek(&bus->glom));
1184
1185         /* If there's a descriptor, generate the packet chain */
1186         if (bus->glomd) {
1187                 pfirst = pnext = NULL;
1188                 dlen = (u16) (bus->glomd->len);
1189                 dptr = bus->glomd->data;
1190                 if (!dlen || (dlen & 1)) {
1191                         brcmf_err("bad glomd len(%d), ignore descriptor\n",
1192                                   dlen);
1193                         dlen = 0;
1194                 }
1195
1196                 for (totlen = num = 0; dlen; num++) {
1197                         /* Get (and move past) next length */
1198                         sublen = get_unaligned_le16(dptr);
1199                         dlen -= sizeof(u16);
1200                         dptr += sizeof(u16);
1201                         if ((sublen < SDPCM_HDRLEN) ||
1202                             ((num == 0) && (sublen < (2 * SDPCM_HDRLEN)))) {
1203                                 brcmf_err("descriptor len %d bad: %d\n",
1204                                           num, sublen);
1205                                 pnext = NULL;
1206                                 break;
1207                         }
1208                         if (sublen % BRCMF_SDALIGN) {
1209                                 brcmf_err("sublen %d not multiple of %d\n",
1210                                           sublen, BRCMF_SDALIGN);
1211                         }
1212                         totlen += sublen;
1213
1214                         /* For last frame, adjust read len so total
1215                                  is a block multiple */
1216                         if (!dlen) {
1217                                 sublen +=
1218                                     (roundup(totlen, bus->blocksize) - totlen);
1219                                 totlen = roundup(totlen, bus->blocksize);
1220                         }
1221
1222                         /* Allocate/chain packet for next subframe */
1223                         pnext = brcmu_pkt_buf_get_skb(sublen + BRCMF_SDALIGN);
1224                         if (pnext == NULL) {
1225                                 brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n",
1226                                           num, sublen);
1227                                 break;
1228                         }
1229                         skb_queue_tail(&bus->glom, pnext);
1230
1231                         /* Adhere to start alignment requirements */
1232                         pkt_align(pnext, sublen, BRCMF_SDALIGN);
1233                 }
1234
1235                 /* If all allocations succeeded, save packet chain
1236                          in bus structure */
1237                 if (pnext) {
1238                         brcmf_dbg(GLOM, "allocated %d-byte packet chain for %d subframes\n",
1239                                   totlen, num);
1240                         if (BRCMF_GLOM_ON() && bus->cur_read.len &&
1241                             totlen != bus->cur_read.len) {
1242                                 brcmf_dbg(GLOM, "glomdesc mismatch: nextlen %d glomdesc %d rxseq %d\n",
1243                                           bus->cur_read.len, totlen, rxseq);
1244                         }
1245                         pfirst = pnext = NULL;
1246                 } else {
1247                         brcmf_sdbrcm_free_glom(bus);
1248                         num = 0;
1249                 }
1250
1251                 /* Done with descriptor packet */
1252                 brcmu_pkt_buf_free_skb(bus->glomd);
1253                 bus->glomd = NULL;
1254                 bus->cur_read.len = 0;
1255         }
1256
1257         /* Ok -- either we just generated a packet chain,
1258                  or had one from before */
1259         if (!skb_queue_empty(&bus->glom)) {
1260                 if (BRCMF_GLOM_ON()) {
1261                         brcmf_dbg(GLOM, "try superframe read, packet chain:\n");
1262                         skb_queue_walk(&bus->glom, pnext) {
1263                                 brcmf_dbg(GLOM, "    %p: %p len 0x%04x (%d)\n",
1264                                           pnext, (u8 *) (pnext->data),
1265                                           pnext->len, pnext->len);
1266                         }
1267                 }
1268
1269                 pfirst = skb_peek(&bus->glom);
1270                 dlen = (u16) brcmf_sdbrcm_glom_len(bus);
1271
1272                 /* Do an SDIO read for the superframe.  Configurable iovar to
1273                  * read directly into the chained packet, or allocate a large
1274                  * packet and and copy into the chain.
1275                  */
1276                 sdio_claim_host(bus->sdiodev->func[1]);
1277                 errcode = brcmf_sdcard_recv_chain(bus->sdiodev,
1278                                 bus->sdiodev->sbwad,
1279                                 SDIO_FUNC_2, F2SYNC, &bus->glom);
1280                 sdio_release_host(bus->sdiodev->func[1]);
1281                 bus->sdcnt.f2rxdata++;
1282
1283                 /* On failure, kill the superframe, allow a couple retries */
1284                 if (errcode < 0) {
1285                         brcmf_err("glom read of %d bytes failed: %d\n",
1286                                   dlen, errcode);
1287
1288                         sdio_claim_host(bus->sdiodev->func[1]);
1289                         if (bus->glomerr++ < 3) {
1290                                 brcmf_sdbrcm_rxfail(bus, true, true);
1291                         } else {
1292                                 bus->glomerr = 0;
1293                                 brcmf_sdbrcm_rxfail(bus, true, false);
1294                                 bus->sdcnt.rxglomfail++;
1295                                 brcmf_sdbrcm_free_glom(bus);
1296                         }
1297                         sdio_release_host(bus->sdiodev->func[1]);
1298                         return 0;
1299                 }
1300
1301                 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1302                                    pfirst->data, min_t(int, pfirst->len, 48),
1303                                    "SUPERFRAME:\n");
1304
1305                 rd_new.seq_num = rxseq;
1306                 rd_new.len = dlen;
1307                 sdio_claim_host(bus->sdiodev->func[1]);
1308                 errcode = brcmf_sdio_hdparser(bus, pfirst->data, &rd_new,
1309                                               BRCMF_SDIO_FT_SUPER);
1310                 sdio_release_host(bus->sdiodev->func[1]);
1311                 bus->cur_read.len = rd_new.len_nxtfrm << 4;
1312
1313                 /* Remove superframe header, remember offset */
1314                 skb_pull(pfirst, rd_new.dat_offset);
1315                 sfdoff = rd_new.dat_offset;
1316                 num = 0;
1317
1318                 /* Validate all the subframe headers */
1319                 skb_queue_walk(&bus->glom, pnext) {
1320                         /* leave when invalid subframe is found */
1321                         if (errcode)
1322                                 break;
1323
1324                         rd_new.len = pnext->len;
1325                         rd_new.seq_num = rxseq++;
1326                         sdio_claim_host(bus->sdiodev->func[1]);
1327                         errcode = brcmf_sdio_hdparser(bus, pnext->data, &rd_new,
1328                                                       BRCMF_SDIO_FT_SUB);
1329                         sdio_release_host(bus->sdiodev->func[1]);
1330                         brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1331                                            pnext->data, 32, "subframe:\n");
1332
1333                         num++;
1334                 }
1335
1336                 if (errcode) {
1337                         /* Terminate frame on error, request
1338                                  a couple retries */
1339                         sdio_claim_host(bus->sdiodev->func[1]);
1340                         if (bus->glomerr++ < 3) {
1341                                 /* Restore superframe header space */
1342                                 skb_push(pfirst, sfdoff);
1343                                 brcmf_sdbrcm_rxfail(bus, true, true);
1344                         } else {
1345                                 bus->glomerr = 0;
1346                                 brcmf_sdbrcm_rxfail(bus, true, false);
1347                                 bus->sdcnt.rxglomfail++;
1348                                 brcmf_sdbrcm_free_glom(bus);
1349                         }
1350                         sdio_release_host(bus->sdiodev->func[1]);
1351                         bus->cur_read.len = 0;
1352                         return 0;
1353                 }
1354
1355                 /* Basic SD framing looks ok - process each packet (header) */
1356
1357                 skb_queue_walk_safe(&bus->glom, pfirst, pnext) {
1358                         dptr = (u8 *) (pfirst->data);
1359                         sublen = get_unaligned_le16(dptr);
1360                         doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
1361
1362                         brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
1363                                            dptr, pfirst->len,
1364                                            "Rx Subframe Data:\n");
1365
1366                         __skb_trim(pfirst, sublen);
1367                         skb_pull(pfirst, doff);
1368
1369                         if (pfirst->len == 0) {
1370                                 skb_unlink(pfirst, &bus->glom);
1371                                 brcmu_pkt_buf_free_skb(pfirst);
1372                                 continue;
1373                         }
1374
1375                         brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1376                                            pfirst->data,
1377                                            min_t(int, pfirst->len, 32),
1378                                            "subframe %d to stack, %p (%p/%d) nxt/lnk %p/%p\n",
1379                                            bus->glom.qlen, pfirst, pfirst->data,
1380                                            pfirst->len, pfirst->next,
1381                                            pfirst->prev);
1382                 }
1383                 /* sent any remaining packets up */
1384                 if (bus->glom.qlen)
1385                         brcmf_rx_frames(bus->sdiodev->dev, &bus->glom);
1386
1387                 bus->sdcnt.rxglomframes++;
1388                 bus->sdcnt.rxglompkts += bus->glom.qlen;
1389         }
1390         return num;
1391 }
1392
1393 static int brcmf_sdbrcm_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition,
1394                                         bool *pending)
1395 {
1396         DECLARE_WAITQUEUE(wait, current);
1397         int timeout = msecs_to_jiffies(DCMD_RESP_TIMEOUT);
1398
1399         /* Wait until control frame is available */
1400         add_wait_queue(&bus->dcmd_resp_wait, &wait);
1401         set_current_state(TASK_INTERRUPTIBLE);
1402
1403         while (!(*condition) && (!signal_pending(current) && timeout))
1404                 timeout = schedule_timeout(timeout);
1405
1406         if (signal_pending(current))
1407                 *pending = true;
1408
1409         set_current_state(TASK_RUNNING);
1410         remove_wait_queue(&bus->dcmd_resp_wait, &wait);
1411
1412         return timeout;
1413 }
1414
1415 static int brcmf_sdbrcm_dcmd_resp_wake(struct brcmf_sdio *bus)
1416 {
1417         if (waitqueue_active(&bus->dcmd_resp_wait))
1418                 wake_up_interruptible(&bus->dcmd_resp_wait);
1419
1420         return 0;
1421 }
1422 static void
1423 brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
1424 {
1425         uint rdlen, pad;
1426         u8 *buf = NULL, *rbuf;
1427         int sdret;
1428
1429         brcmf_dbg(TRACE, "Enter\n");
1430
1431         if (bus->rxblen)
1432                 buf = vzalloc(bus->rxblen);
1433         if (!buf)
1434                 goto done;
1435
1436         rbuf = bus->rxbuf;
1437         pad = ((unsigned long)rbuf % BRCMF_SDALIGN);
1438         if (pad)
1439                 rbuf += (BRCMF_SDALIGN - pad);
1440
1441         /* Copy the already-read portion over */
1442         memcpy(buf, hdr, BRCMF_FIRSTREAD);
1443         if (len <= BRCMF_FIRSTREAD)
1444                 goto gotpkt;
1445
1446         /* Raise rdlen to next SDIO block to avoid tail command */
1447         rdlen = len - BRCMF_FIRSTREAD;
1448         if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) {
1449                 pad = bus->blocksize - (rdlen % bus->blocksize);
1450                 if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
1451                     ((len + pad) < bus->sdiodev->bus_if->maxctl))
1452                         rdlen += pad;
1453         } else if (rdlen % BRCMF_SDALIGN) {
1454                 rdlen += BRCMF_SDALIGN - (rdlen % BRCMF_SDALIGN);
1455         }
1456
1457         /* Satisfy length-alignment requirements */
1458         if (rdlen & (ALIGNMENT - 1))
1459                 rdlen = roundup(rdlen, ALIGNMENT);
1460
1461         /* Drop if the read is too big or it exceeds our maximum */
1462         if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) {
1463                 brcmf_err("%d-byte control read exceeds %d-byte buffer\n",
1464                           rdlen, bus->sdiodev->bus_if->maxctl);
1465                 brcmf_sdbrcm_rxfail(bus, false, false);
1466                 goto done;
1467         }
1468
1469         if ((len - doff) > bus->sdiodev->bus_if->maxctl) {
1470                 brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
1471                           len, len - doff, bus->sdiodev->bus_if->maxctl);
1472                 bus->sdcnt.rx_toolong++;
1473                 brcmf_sdbrcm_rxfail(bus, false, false);
1474                 goto done;
1475         }
1476
1477         /* Read remain of frame body */
1478         sdret = brcmf_sdcard_recv_buf(bus->sdiodev,
1479                                 bus->sdiodev->sbwad,
1480                                 SDIO_FUNC_2,
1481                                 F2SYNC, rbuf, rdlen);
1482         bus->sdcnt.f2rxdata++;
1483
1484         /* Control frame failures need retransmission */
1485         if (sdret < 0) {
1486                 brcmf_err("read %d control bytes failed: %d\n",
1487                           rdlen, sdret);
1488                 bus->sdcnt.rxc_errors++;
1489                 brcmf_sdbrcm_rxfail(bus, true, true);
1490                 goto done;
1491         } else
1492                 memcpy(buf + BRCMF_FIRSTREAD, rbuf, rdlen);
1493
1494 gotpkt:
1495
1496         brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
1497                            buf, len, "RxCtrl:\n");
1498
1499         /* Point to valid data and indicate its length */
1500         spin_lock_bh(&bus->rxctl_lock);
1501         if (bus->rxctl) {
1502                 brcmf_err("last control frame is being processed.\n");
1503                 spin_unlock_bh(&bus->rxctl_lock);
1504                 vfree(buf);
1505                 goto done;
1506         }
1507         bus->rxctl = buf + doff;
1508         bus->rxctl_orig = buf;
1509         bus->rxlen = len - doff;
1510         spin_unlock_bh(&bus->rxctl_lock);
1511
1512 done:
1513         /* Awake any waiters */
1514         brcmf_sdbrcm_dcmd_resp_wake(bus);
1515 }
1516
1517 /* Pad read to blocksize for efficiency */
1518 static void brcmf_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen)
1519 {
1520         if (bus->roundup && bus->blocksize && *rdlen > bus->blocksize) {
1521                 *pad = bus->blocksize - (*rdlen % bus->blocksize);
1522                 if (*pad <= bus->roundup && *pad < bus->blocksize &&
1523                     *rdlen + *pad + BRCMF_FIRSTREAD < MAX_RX_DATASZ)
1524                         *rdlen += *pad;
1525         } else if (*rdlen % BRCMF_SDALIGN) {
1526                 *rdlen += BRCMF_SDALIGN - (*rdlen % BRCMF_SDALIGN);
1527         }
1528 }
1529
1530 static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
1531 {
1532         struct sk_buff *pkt;            /* Packet for event or data frames */
1533         struct sk_buff_head pktlist;    /* needed for bus interface */
1534         u16 pad;                /* Number of pad bytes to read */
1535         uint rxleft = 0;        /* Remaining number of frames allowed */
1536         int ret;                /* Return code from calls */
1537         uint rxcount = 0;       /* Total frames read */
1538         struct brcmf_sdio_read *rd = &bus->cur_read, rd_new;
1539         u8 head_read = 0;
1540
1541         brcmf_dbg(TRACE, "Enter\n");
1542
1543         /* Not finished unless we encounter no more frames indication */
1544         bus->rxpending = true;
1545
1546         for (rd->seq_num = bus->rx_seq, rxleft = maxframes;
1547              !bus->rxskip && rxleft &&
1548              bus->sdiodev->bus_if->state != BRCMF_BUS_DOWN;
1549              rd->seq_num++, rxleft--) {
1550
1551                 /* Handle glomming separately */
1552                 if (bus->glomd || !skb_queue_empty(&bus->glom)) {
1553                         u8 cnt;
1554                         brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n",
1555                                   bus->glomd, skb_peek(&bus->glom));
1556                         cnt = brcmf_sdbrcm_rxglom(bus, rd->seq_num);
1557                         brcmf_dbg(GLOM, "rxglom returned %d\n", cnt);
1558                         rd->seq_num += cnt - 1;
1559                         rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1;
1560                         continue;
1561                 }
1562
1563                 rd->len_left = rd->len;
1564                 /* read header first for unknow frame length */
1565                 sdio_claim_host(bus->sdiodev->func[1]);
1566                 if (!rd->len) {
1567                         ret = brcmf_sdcard_recv_buf(bus->sdiodev,
1568                                                       bus->sdiodev->sbwad,
1569                                                       SDIO_FUNC_2, F2SYNC,
1570                                                       bus->rxhdr,
1571                                                       BRCMF_FIRSTREAD);
1572                         bus->sdcnt.f2rxhdrs++;
1573                         if (ret < 0) {
1574                                 brcmf_err("RXHEADER FAILED: %d\n",
1575                                           ret);
1576                                 bus->sdcnt.rx_hdrfail++;
1577                                 brcmf_sdbrcm_rxfail(bus, true, true);
1578                                 sdio_release_host(bus->sdiodev->func[1]);
1579                                 continue;
1580                         }
1581
1582                         brcmf_dbg_hex_dump(BRCMF_BYTES_ON() || BRCMF_HDRS_ON(),
1583                                            bus->rxhdr, SDPCM_HDRLEN,
1584                                            "RxHdr:\n");
1585
1586                         if (brcmf_sdio_hdparser(bus, bus->rxhdr, rd,
1587                                                 BRCMF_SDIO_FT_NORMAL)) {
1588                                 sdio_release_host(bus->sdiodev->func[1]);
1589                                 if (!bus->rxpending)
1590                                         break;
1591                                 else
1592                                         continue;
1593                         }
1594
1595                         if (rd->channel == SDPCM_CONTROL_CHANNEL) {
1596                                 brcmf_sdbrcm_read_control(bus, bus->rxhdr,
1597                                                           rd->len,
1598                                                           rd->dat_offset);
1599                                 /* prepare the descriptor for the next read */
1600                                 rd->len = rd->len_nxtfrm << 4;
1601                                 rd->len_nxtfrm = 0;
1602                                 /* treat all packet as event if we don't know */
1603                                 rd->channel = SDPCM_EVENT_CHANNEL;
1604                                 sdio_release_host(bus->sdiodev->func[1]);
1605                                 continue;
1606                         }
1607                         rd->len_left = rd->len > BRCMF_FIRSTREAD ?
1608                                        rd->len - BRCMF_FIRSTREAD : 0;
1609                         head_read = BRCMF_FIRSTREAD;
1610                 }
1611
1612                 brcmf_pad(bus, &pad, &rd->len_left);
1613
1614                 pkt = brcmu_pkt_buf_get_skb(rd->len_left + head_read +
1615                                             BRCMF_SDALIGN);
1616                 if (!pkt) {
1617                         /* Give up on data, request rtx of events */
1618                         brcmf_err("brcmu_pkt_buf_get_skb failed\n");
1619                         brcmf_sdbrcm_rxfail(bus, false,
1620                                             RETRYCHAN(rd->channel));
1621                         sdio_release_host(bus->sdiodev->func[1]);
1622                         continue;
1623                 }
1624                 skb_pull(pkt, head_read);
1625                 pkt_align(pkt, rd->len_left, BRCMF_SDALIGN);
1626
1627                 ret = brcmf_sdcard_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
1628                                               SDIO_FUNC_2, F2SYNC, pkt);
1629                 bus->sdcnt.f2rxdata++;
1630                 sdio_release_host(bus->sdiodev->func[1]);
1631
1632                 if (ret < 0) {
1633                         brcmf_err("read %d bytes from channel %d failed: %d\n",
1634                                   rd->len, rd->channel, ret);
1635                         brcmu_pkt_buf_free_skb(pkt);
1636                         sdio_claim_host(bus->sdiodev->func[1]);
1637                         brcmf_sdbrcm_rxfail(bus, true,
1638                                             RETRYCHAN(rd->channel));
1639                         sdio_release_host(bus->sdiodev->func[1]);
1640                         continue;
1641                 }
1642
1643                 if (head_read) {
1644                         skb_push(pkt, head_read);
1645                         memcpy(pkt->data, bus->rxhdr, head_read);
1646                         head_read = 0;
1647                 } else {
1648                         memcpy(bus->rxhdr, pkt->data, SDPCM_HDRLEN);
1649                         rd_new.seq_num = rd->seq_num;
1650                         sdio_claim_host(bus->sdiodev->func[1]);
1651                         if (brcmf_sdio_hdparser(bus, bus->rxhdr, &rd_new,
1652                                                 BRCMF_SDIO_FT_NORMAL)) {
1653                                 rd->len = 0;
1654                                 brcmu_pkt_buf_free_skb(pkt);
1655                         }
1656                         bus->sdcnt.rx_readahead_cnt++;
1657                         if (rd->len != roundup(rd_new.len, 16)) {
1658                                 brcmf_err("frame length mismatch:read %d, should be %d\n",
1659                                           rd->len,
1660                                           roundup(rd_new.len, 16) >> 4);
1661                                 rd->len = 0;
1662                                 brcmf_sdbrcm_rxfail(bus, true, true);
1663                                 sdio_release_host(bus->sdiodev->func[1]);
1664                                 brcmu_pkt_buf_free_skb(pkt);
1665                                 continue;
1666                         }
1667                         sdio_release_host(bus->sdiodev->func[1]);
1668                         rd->len_nxtfrm = rd_new.len_nxtfrm;
1669                         rd->channel = rd_new.channel;
1670                         rd->dat_offset = rd_new.dat_offset;
1671
1672                         brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() &&
1673                                              BRCMF_DATA_ON()) &&
1674                                            BRCMF_HDRS_ON(),
1675                                            bus->rxhdr, SDPCM_HDRLEN,
1676                                            "RxHdr:\n");
1677
1678                         if (rd_new.channel == SDPCM_CONTROL_CHANNEL) {
1679                                 brcmf_err("readahead on control packet %d?\n",
1680                                           rd_new.seq_num);
1681                                 /* Force retry w/normal header read */
1682                                 rd->len = 0;
1683                                 sdio_claim_host(bus->sdiodev->func[1]);
1684                                 brcmf_sdbrcm_rxfail(bus, false, true);
1685                                 sdio_release_host(bus->sdiodev->func[1]);
1686                                 brcmu_pkt_buf_free_skb(pkt);
1687                                 continue;
1688                         }
1689                 }
1690
1691                 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
1692                                    pkt->data, rd->len, "Rx Data:\n");
1693
1694                 /* Save superframe descriptor and allocate packet frame */
1695                 if (rd->channel == SDPCM_GLOM_CHANNEL) {
1696                         if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_FRAMETAG_LEN])) {
1697                                 brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n",
1698                                           rd->len);
1699                                 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1700                                                    pkt->data, rd->len,
1701                                                    "Glom Data:\n");
1702                                 __skb_trim(pkt, rd->len);
1703                                 skb_pull(pkt, SDPCM_HDRLEN);
1704                                 bus->glomd = pkt;
1705                         } else {
1706                                 brcmf_err("%s: glom superframe w/o "
1707                                           "descriptor!\n", __func__);
1708                                 sdio_claim_host(bus->sdiodev->func[1]);
1709                                 brcmf_sdbrcm_rxfail(bus, false, false);
1710                                 sdio_release_host(bus->sdiodev->func[1]);
1711                         }
1712                         /* prepare the descriptor for the next read */
1713                         rd->len = rd->len_nxtfrm << 4;
1714                         rd->len_nxtfrm = 0;
1715                         /* treat all packet as event if we don't know */
1716                         rd->channel = SDPCM_EVENT_CHANNEL;
1717                         continue;
1718                 }
1719
1720                 /* Fill in packet len and prio, deliver upward */
1721                 __skb_trim(pkt, rd->len);
1722                 skb_pull(pkt, rd->dat_offset);
1723
1724                 /* prepare the descriptor for the next read */
1725                 rd->len = rd->len_nxtfrm << 4;
1726                 rd->len_nxtfrm = 0;
1727                 /* treat all packet as event if we don't know */
1728                 rd->channel = SDPCM_EVENT_CHANNEL;
1729
1730                 if (pkt->len == 0) {
1731                         brcmu_pkt_buf_free_skb(pkt);
1732                         continue;
1733                 }
1734
1735                 skb_queue_head_init(&pktlist);
1736                 skb_queue_tail(&pktlist, pkt);
1737                 brcmf_rx_frames(bus->sdiodev->dev, &pktlist);
1738         }
1739
1740         rxcount = maxframes - rxleft;
1741         /* Message if we hit the limit */
1742         if (!rxleft)
1743                 brcmf_dbg(DATA, "hit rx limit of %d frames\n", maxframes);
1744         else
1745                 brcmf_dbg(DATA, "processed %d frames\n", rxcount);
1746         /* Back off rxseq if awaiting rtx, update rx_seq */
1747         if (bus->rxskip)
1748                 rd->seq_num--;
1749         bus->rx_seq = rd->seq_num;
1750
1751         return rxcount;
1752 }
1753
1754 static void
1755 brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus)
1756 {
1757         if (waitqueue_active(&bus->ctrl_wait))
1758                 wake_up_interruptible(&bus->ctrl_wait);
1759         return;
1760 }
1761
1762 /* Writes a HW/SW header into the packet and sends it. */
1763 /* Assumes: (a) header space already there, (b) caller holds lock */
1764 static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,
1765                               uint chan)
1766 {
1767         int ret;
1768         u8 *frame;
1769         u16 len, pad = 0;
1770         u32 swheader;
1771         int i;
1772
1773         brcmf_dbg(TRACE, "Enter\n");
1774
1775         frame = (u8 *) (pkt->data);
1776
1777         /* Add alignment padding, allocate new packet if needed */
1778         pad = ((unsigned long)frame % BRCMF_SDALIGN);
1779         if (pad) {
1780                 if (skb_headroom(pkt) < pad) {
1781                         brcmf_dbg(INFO, "insufficient headroom %d for %d pad\n",
1782                                   skb_headroom(pkt), pad);
1783                         bus->sdiodev->bus_if->tx_realloc++;
1784                         ret = skb_cow(pkt, BRCMF_SDALIGN);
1785                         if (ret)
1786                                 goto done;
1787                         pad = ((unsigned long)frame % BRCMF_SDALIGN);
1788                 }
1789                 skb_push(pkt, pad);
1790                 frame = (u8 *) (pkt->data);
1791                 memset(frame, 0, pad + SDPCM_HDRLEN);
1792         }
1793         /* precondition: pad < BRCMF_SDALIGN */
1794
1795         /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */
1796         len = (u16) (pkt->len);
1797         *(__le16 *) frame = cpu_to_le16(len);
1798         *(((__le16 *) frame) + 1) = cpu_to_le16(~len);
1799
1800         /* Software tag: channel, sequence number, data offset */
1801         swheader =
1802             ((chan << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK) | bus->tx_seq |
1803             (((pad +
1804                SDPCM_HDRLEN) << SDPCM_DOFFSET_SHIFT) & SDPCM_DOFFSET_MASK);
1805
1806         *(((__le32 *) frame) + 1) = cpu_to_le32(swheader);
1807         *(((__le32 *) frame) + 2) = 0;
1808
1809 #ifdef DEBUG
1810         tx_packets[pkt->priority]++;
1811 #endif
1812
1813         brcmf_dbg_hex_dump(BRCMF_BYTES_ON() &&
1814                            ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) ||
1815                             (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL)),
1816                            frame, len, "Tx Frame:\n");
1817         brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() &&
1818                              ((BRCMF_CTL_ON() &&
1819                                chan == SDPCM_CONTROL_CHANNEL) ||
1820                               (BRCMF_DATA_ON() &&
1821                                chan != SDPCM_CONTROL_CHANNEL))) &&
1822                            BRCMF_HDRS_ON(),
1823                            frame, min_t(u16, len, 16), "TxHdr:\n");
1824
1825         /* Raise len to next SDIO block to eliminate tail command */
1826         if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
1827                 u16 pad = bus->blocksize - (len % bus->blocksize);
1828                 if ((pad <= bus->roundup) && (pad < bus->blocksize))
1829                                 len += pad;
1830         } else if (len % BRCMF_SDALIGN) {
1831                 len += BRCMF_SDALIGN - (len % BRCMF_SDALIGN);
1832         }
1833
1834         /* Some controllers have trouble with odd bytes -- round to even */
1835         if (len & (ALIGNMENT - 1))
1836                         len = roundup(len, ALIGNMENT);
1837
1838         sdio_claim_host(bus->sdiodev->func[1]);
1839         ret = brcmf_sdcard_send_pkt(bus->sdiodev, bus->sdiodev->sbwad,
1840                                     SDIO_FUNC_2, F2SYNC, pkt);
1841         bus->sdcnt.f2txdata++;
1842
1843         if (ret < 0) {
1844                 /* On failure, abort the command and terminate the frame */
1845                 brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
1846                           ret);
1847                 bus->sdcnt.tx_sderrs++;
1848
1849                 brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
1850                 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
1851                                  SFC_WF_TERM, NULL);
1852                 bus->sdcnt.f1regdata++;
1853
1854                 for (i = 0; i < 3; i++) {
1855                         u8 hi, lo;
1856                         hi = brcmf_sdio_regrb(bus->sdiodev,
1857                                               SBSDIO_FUNC1_WFRAMEBCHI, NULL);
1858                         lo = brcmf_sdio_regrb(bus->sdiodev,
1859                                               SBSDIO_FUNC1_WFRAMEBCLO, NULL);
1860                         bus->sdcnt.f1regdata += 2;
1861                         if ((hi == 0) && (lo == 0))
1862                                 break;
1863                 }
1864
1865         }
1866         sdio_release_host(bus->sdiodev->func[1]);
1867         if (ret == 0)
1868                 bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
1869
1870 done:
1871         /* restore pkt buffer pointer before calling tx complete routine */
1872         skb_pull(pkt, SDPCM_HDRLEN + pad);
1873         brcmf_txcomplete(bus->sdiodev->dev, pkt, ret == 0);
1874         return ret;
1875 }
1876
1877 static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes)
1878 {
1879         struct sk_buff *pkt;
1880         u32 intstatus = 0;
1881         int ret = 0, prec_out;
1882         uint cnt = 0;
1883         uint datalen;
1884         u8 tx_prec_map;
1885
1886         brcmf_dbg(TRACE, "Enter\n");
1887
1888         tx_prec_map = ~bus->flowcontrol;
1889
1890         /* Send frames until the limit or some other event */
1891         for (cnt = 0; (cnt < maxframes) && data_ok(bus); cnt++) {
1892                 spin_lock_bh(&bus->txqlock);
1893                 pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, &prec_out);
1894                 if (pkt == NULL) {
1895                         spin_unlock_bh(&bus->txqlock);
1896                         break;
1897                 }
1898                 spin_unlock_bh(&bus->txqlock);
1899                 datalen = pkt->len - SDPCM_HDRLEN;
1900
1901                 ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL);
1902
1903                 /* In poll mode, need to check for other events */
1904                 if (!bus->intr && cnt) {
1905                         /* Check device status, signal pending interrupt */
1906                         sdio_claim_host(bus->sdiodev->func[1]);
1907                         ret = r_sdreg32(bus, &intstatus,
1908                                         offsetof(struct sdpcmd_regs,
1909                                                  intstatus));
1910                         sdio_release_host(bus->sdiodev->func[1]);
1911                         bus->sdcnt.f2txdata++;
1912                         if (ret != 0)
1913                                 break;
1914                         if (intstatus & bus->hostintmask)
1915                                 atomic_set(&bus->ipend, 1);
1916                 }
1917         }
1918
1919         /* Deflow-control stack if needed */
1920         if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DATA) &&
1921             bus->txoff && (pktq_len(&bus->txq) < TXLOW)) {
1922                 bus->txoff = false;
1923                 brcmf_txflowblock(bus->sdiodev->dev, false);
1924         }
1925
1926         return cnt;
1927 }
1928
1929 static void brcmf_sdbrcm_bus_stop(struct device *dev)
1930 {
1931         u32 local_hostintmask;
1932         u8 saveclk;
1933         int err;
1934         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
1935         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
1936         struct brcmf_sdio *bus = sdiodev->bus;
1937
1938         brcmf_dbg(TRACE, "Enter\n");
1939
1940         if (bus->watchdog_tsk) {
1941                 send_sig(SIGTERM, bus->watchdog_tsk, 1);
1942                 kthread_stop(bus->watchdog_tsk);
1943                 bus->watchdog_tsk = NULL;
1944         }
1945
1946         sdio_claim_host(bus->sdiodev->func[1]);
1947
1948         /* Enable clock for device interrupts */
1949         brcmf_sdbrcm_bus_sleep(bus, false, false);
1950
1951         /* Disable and clear interrupts at the chip level also */
1952         w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask));
1953         local_hostintmask = bus->hostintmask;
1954         bus->hostintmask = 0;
1955
1956         /* Change our idea of bus state */
1957         bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
1958
1959         /* Force clocks on backplane to be sure F2 interrupt propagates */
1960         saveclk = brcmf_sdio_regrb(bus->sdiodev,
1961                                    SBSDIO_FUNC1_CHIPCLKCSR, &err);
1962         if (!err) {
1963                 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
1964                                  (saveclk | SBSDIO_FORCE_HT), &err);
1965         }
1966         if (err)
1967                 brcmf_err("Failed to force clock for F2: err %d\n", err);
1968
1969         /* Turn off the bus (F2), free any pending packets */
1970         brcmf_dbg(INTR, "disable SDIO interrupts\n");
1971         brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1,
1972                          NULL);
1973
1974         /* Clear any pending interrupts now that F2 is disabled */
1975         w_sdreg32(bus, local_hostintmask,
1976                   offsetof(struct sdpcmd_regs, intstatus));
1977
1978         /* Turn off the backplane clock (only) */
1979         brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
1980         sdio_release_host(bus->sdiodev->func[1]);
1981
1982         /* Clear the data packet queues */
1983         brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
1984
1985         /* Clear any held glomming stuff */
1986         if (bus->glomd)
1987                 brcmu_pkt_buf_free_skb(bus->glomd);
1988         brcmf_sdbrcm_free_glom(bus);
1989
1990         /* Clear rx control and wake any waiters */
1991         spin_lock_bh(&bus->rxctl_lock);
1992         bus->rxlen = 0;
1993         spin_unlock_bh(&bus->rxctl_lock);
1994         brcmf_sdbrcm_dcmd_resp_wake(bus);
1995
1996         /* Reset some F2 state stuff */
1997         bus->rxskip = false;
1998         bus->tx_seq = bus->rx_seq = 0;
1999 }
2000
2001 static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
2002 {
2003         unsigned long flags;
2004
2005         if (bus->sdiodev->oob_irq_requested) {
2006                 spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags);
2007                 if (!bus->sdiodev->irq_en && !atomic_read(&bus->ipend)) {
2008                         enable_irq(bus->sdiodev->pdata->oob_irq_nr);
2009                         bus->sdiodev->irq_en = true;
2010                 }
2011                 spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags);
2012         }
2013 }
2014
2015 static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
2016 {
2017         u8 idx;
2018         u32 addr;
2019         unsigned long val;
2020         int n, ret;
2021
2022         idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
2023         addr = bus->ci->c_inf[idx].base +
2024                offsetof(struct sdpcmd_regs, intstatus);
2025
2026         ret = brcmf_sdio_regrw_helper(bus->sdiodev, addr, &val, false);
2027         bus->sdcnt.f1regdata++;
2028         if (ret != 0)
2029                 val = 0;
2030
2031         val &= bus->hostintmask;
2032         atomic_set(&bus->fcstate, !!(val & I_HMB_FC_STATE));
2033
2034         /* Clear interrupts */
2035         if (val) {
2036                 ret = brcmf_sdio_regrw_helper(bus->sdiodev, addr, &val, true);
2037                 bus->sdcnt.f1regdata++;
2038         }
2039
2040         if (ret) {
2041                 atomic_set(&bus->intstatus, 0);
2042         } else if (val) {
2043                 for_each_set_bit(n, &val, 32)
2044                         set_bit(n, (unsigned long *)&bus->intstatus.counter);
2045         }
2046
2047         return ret;
2048 }
2049
2050 static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
2051 {
2052         u32 newstatus = 0;
2053         unsigned long intstatus;
2054         uint rxlimit = bus->rxbound;    /* Rx frames to read before resched */
2055         uint txlimit = bus->txbound;    /* Tx frames to send before resched */
2056         uint framecnt = 0;      /* Temporary counter of tx/rx frames */
2057         int err = 0, n;
2058
2059         brcmf_dbg(TRACE, "Enter\n");
2060
2061         sdio_claim_host(bus->sdiodev->func[1]);
2062
2063         /* If waiting for HTAVAIL, check status */
2064         if (!bus->sr_enabled && bus->clkstate == CLK_PENDING) {
2065                 u8 clkctl, devctl = 0;
2066
2067 #ifdef DEBUG
2068                 /* Check for inconsistent device control */
2069                 devctl = brcmf_sdio_regrb(bus->sdiodev,
2070                                           SBSDIO_DEVICE_CTL, &err);
2071                 if (err) {
2072                         brcmf_err("error reading DEVCTL: %d\n", err);
2073                         bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
2074                 }
2075 #endif                          /* DEBUG */
2076
2077                 /* Read CSR, if clock on switch to AVAIL, else ignore */
2078                 clkctl = brcmf_sdio_regrb(bus->sdiodev,
2079                                           SBSDIO_FUNC1_CHIPCLKCSR, &err);
2080                 if (err) {
2081                         brcmf_err("error reading CSR: %d\n",
2082                                   err);
2083                         bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
2084                 }
2085
2086                 brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",
2087                           devctl, clkctl);
2088
2089                 if (SBSDIO_HTAV(clkctl)) {
2090                         devctl = brcmf_sdio_regrb(bus->sdiodev,
2091                                                   SBSDIO_DEVICE_CTL, &err);
2092                         if (err) {
2093                                 brcmf_err("error reading DEVCTL: %d\n",
2094                                           err);
2095                                 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
2096                         }
2097                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
2098                         brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
2099                                          devctl, &err);
2100                         if (err) {
2101                                 brcmf_err("error writing DEVCTL: %d\n",
2102                                           err);
2103                                 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
2104                         }
2105                         bus->clkstate = CLK_AVAIL;
2106                 }
2107         }
2108
2109         /* Make sure backplane clock is on */
2110         brcmf_sdbrcm_bus_sleep(bus, false, true);
2111
2112         /* Pending interrupt indicates new device status */
2113         if (atomic_read(&bus->ipend) > 0) {
2114                 atomic_set(&bus->ipend, 0);
2115                 err = brcmf_sdio_intr_rstatus(bus);
2116         }
2117
2118         /* Start with leftover status bits */
2119         intstatus = atomic_xchg(&bus->intstatus, 0);
2120
2121         /* Handle flow-control change: read new state in case our ack
2122          * crossed another change interrupt.  If change still set, assume
2123          * FC ON for safety, let next loop through do the debounce.
2124          */
2125         if (intstatus & I_HMB_FC_CHANGE) {
2126                 intstatus &= ~I_HMB_FC_CHANGE;
2127                 err = w_sdreg32(bus, I_HMB_FC_CHANGE,
2128                                 offsetof(struct sdpcmd_regs, intstatus));
2129
2130                 err = r_sdreg32(bus, &newstatus,
2131                                 offsetof(struct sdpcmd_regs, intstatus));
2132                 bus->sdcnt.f1regdata += 2;
2133                 atomic_set(&bus->fcstate,
2134                            !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE)));
2135                 intstatus |= (newstatus & bus->hostintmask);
2136         }
2137
2138         /* Handle host mailbox indication */
2139         if (intstatus & I_HMB_HOST_INT) {
2140                 intstatus &= ~I_HMB_HOST_INT;
2141                 intstatus |= brcmf_sdbrcm_hostmail(bus);
2142         }
2143
2144         sdio_release_host(bus->sdiodev->func[1]);
2145
2146         /* Generally don't ask for these, can get CRC errors... */
2147         if (intstatus & I_WR_OOSYNC) {
2148                 brcmf_err("Dongle reports WR_OOSYNC\n");
2149                 intstatus &= ~I_WR_OOSYNC;
2150         }
2151
2152         if (intstatus & I_RD_OOSYNC) {
2153                 brcmf_err("Dongle reports RD_OOSYNC\n");
2154                 intstatus &= ~I_RD_OOSYNC;
2155         }
2156
2157         if (intstatus & I_SBINT) {
2158                 brcmf_err("Dongle reports SBINT\n");
2159                 intstatus &= ~I_SBINT;
2160         }
2161
2162         /* Would be active due to wake-wlan in gSPI */
2163         if (intstatus & I_CHIPACTIVE) {
2164                 brcmf_dbg(INFO, "Dongle reports CHIPACTIVE\n");
2165                 intstatus &= ~I_CHIPACTIVE;
2166         }
2167
2168         /* Ignore frame indications if rxskip is set */
2169         if (bus->rxskip)
2170                 intstatus &= ~I_HMB_FRAME_IND;
2171
2172         /* On frame indication, read available frames */
2173         if (PKT_AVAILABLE() && bus->clkstate == CLK_AVAIL) {
2174                 framecnt = brcmf_sdio_readframes(bus, rxlimit);
2175                 if (!bus->rxpending)
2176                         intstatus &= ~I_HMB_FRAME_IND;
2177                 rxlimit -= min(framecnt, rxlimit);
2178         }
2179
2180         /* Keep still-pending events for next scheduling */
2181         if (intstatus) {
2182                 for_each_set_bit(n, &intstatus, 32)
2183                         set_bit(n, (unsigned long *)&bus->intstatus.counter);
2184         }
2185
2186         brcmf_sdbrcm_clrintr(bus);
2187
2188         if (data_ok(bus) && bus->ctrl_frame_stat &&
2189                 (bus->clkstate == CLK_AVAIL)) {
2190                 int i;
2191
2192                 sdio_claim_host(bus->sdiodev->func[1]);
2193                 err = brcmf_sdcard_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
2194                         SDIO_FUNC_2, F2SYNC, bus->ctrl_frame_buf,
2195                         (u32) bus->ctrl_frame_len);
2196
2197                 if (err < 0) {
2198                         /* On failure, abort the command and
2199                                 terminate the frame */
2200                         brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
2201                                   err);
2202                         bus->sdcnt.tx_sderrs++;
2203
2204                         brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
2205
2206                         brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
2207                                          SFC_WF_TERM, &err);
2208                         bus->sdcnt.f1regdata++;
2209
2210                         for (i = 0; i < 3; i++) {
2211                                 u8 hi, lo;
2212                                 hi = brcmf_sdio_regrb(bus->sdiodev,
2213                                                       SBSDIO_FUNC1_WFRAMEBCHI,
2214                                                       &err);
2215                                 lo = brcmf_sdio_regrb(bus->sdiodev,
2216                                                       SBSDIO_FUNC1_WFRAMEBCLO,
2217                                                       &err);
2218                                 bus->sdcnt.f1regdata += 2;
2219                                 if ((hi == 0) && (lo == 0))
2220                                         break;
2221                         }
2222
2223                 } else {
2224                         bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
2225                 }
2226                 sdio_release_host(bus->sdiodev->func[1]);
2227                 bus->ctrl_frame_stat = false;
2228                 brcmf_sdbrcm_wait_event_wakeup(bus);
2229         }
2230         /* Send queued frames (limit 1 if rx may still be pending) */
2231         else if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) &&
2232                  brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit
2233                  && data_ok(bus)) {
2234                 framecnt = bus->rxpending ? min(txlimit, bus->txminmax) :
2235                                             txlimit;
2236                 framecnt = brcmf_sdbrcm_sendfromq(bus, framecnt);
2237                 txlimit -= framecnt;
2238         }
2239
2240         if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || (err != 0)) {
2241                 brcmf_err("failed backplane access over SDIO, halting operation\n");
2242                 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
2243                 atomic_set(&bus->intstatus, 0);
2244         } else if (atomic_read(&bus->intstatus) ||
2245                    atomic_read(&bus->ipend) > 0 ||
2246                    (!atomic_read(&bus->fcstate) &&
2247                     brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
2248                     data_ok(bus)) || PKT_AVAILABLE()) {
2249                 atomic_inc(&bus->dpc_tskcnt);
2250         }
2251
2252         /* If we're done for now, turn off clock request. */
2253         if ((bus->clkstate != CLK_PENDING)
2254             && bus->idletime == BRCMF_IDLE_IMMEDIATE) {
2255                 bus->activity = false;
2256                 brcmf_dbg(SDIO, "idle state\n");
2257                 sdio_claim_host(bus->sdiodev->func[1]);
2258                 brcmf_sdbrcm_bus_sleep(bus, true, false);
2259                 sdio_release_host(bus->sdiodev->func[1]);
2260         }
2261 }
2262
2263 static struct pktq *brcmf_sdbrcm_bus_gettxq(struct device *dev)
2264 {
2265         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2266         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2267         struct brcmf_sdio *bus = sdiodev->bus;
2268
2269         return &bus->txq;
2270 }
2271
2272 static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
2273 {
2274         int ret = -EBADE;
2275         uint datalen, prec;
2276         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2277         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2278         struct brcmf_sdio *bus = sdiodev->bus;
2279         ulong flags;
2280
2281         brcmf_dbg(TRACE, "Enter\n");
2282
2283         datalen = pkt->len;
2284
2285         /* Add space for the header */
2286         skb_push(pkt, SDPCM_HDRLEN);
2287         /* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */
2288
2289         prec = prio2prec((pkt->priority & PRIOMASK));
2290
2291         /* Check for existing queue, current flow-control,
2292                          pending event, or pending clock */
2293         brcmf_dbg(TRACE, "deferring pktq len %d\n", pktq_len(&bus->txq));
2294         bus->sdcnt.fcqueued++;
2295
2296         /* Priority based enq */
2297         spin_lock_irqsave(&bus->txqlock, flags);
2298         if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) {
2299                 skb_pull(pkt, SDPCM_HDRLEN);
2300                 brcmf_txcomplete(bus->sdiodev->dev, pkt, false);
2301                 brcmf_err("out of bus->txq !!!\n");
2302                 ret = -ENOSR;
2303         } else {
2304                 ret = 0;
2305         }
2306
2307         if (pktq_len(&bus->txq) >= TXHI) {
2308                 bus->txoff = true;
2309                 brcmf_txflowblock(bus->sdiodev->dev, true);
2310         }
2311         spin_unlock_irqrestore(&bus->txqlock, flags);
2312
2313 #ifdef DEBUG
2314         if (pktq_plen(&bus->txq, prec) > qcount[prec])
2315                 qcount[prec] = pktq_plen(&bus->txq, prec);
2316 #endif
2317
2318         if (atomic_read(&bus->dpc_tskcnt) == 0) {
2319                 atomic_inc(&bus->dpc_tskcnt);
2320                 queue_work(bus->brcmf_wq, &bus->datawork);
2321         }
2322
2323         return ret;
2324 }
2325
2326 #ifdef DEBUG
2327 #define CONSOLE_LINE_MAX        192
2328
2329 static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus)
2330 {
2331         struct brcmf_console *c = &bus->console;
2332         u8 line[CONSOLE_LINE_MAX], ch;
2333         u32 n, idx, addr;
2334         int rv;
2335
2336         /* Don't do anything until FWREADY updates console address */
2337         if (bus->console_addr == 0)
2338                 return 0;
2339
2340         /* Read console log struct */
2341         addr = bus->console_addr + offsetof(struct rte_console, log_le);
2342         rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le,
2343                               sizeof(c->log_le));
2344         if (rv < 0)
2345                 return rv;
2346
2347         /* Allocate console buffer (one time only) */
2348         if (c->buf == NULL) {
2349                 c->bufsize = le32_to_cpu(c->log_le.buf_size);
2350                 c->buf = kmalloc(c->bufsize, GFP_ATOMIC);
2351                 if (c->buf == NULL)
2352                         return -ENOMEM;
2353         }
2354
2355         idx = le32_to_cpu(c->log_le.idx);
2356
2357         /* Protect against corrupt value */
2358         if (idx > c->bufsize)
2359                 return -EBADE;
2360
2361         /* Skip reading the console buffer if the index pointer
2362          has not moved */
2363         if (idx == c->last)
2364                 return 0;
2365
2366         /* Read the console buffer */
2367         addr = le32_to_cpu(c->log_le.buf);
2368         rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize);
2369         if (rv < 0)
2370                 return rv;
2371
2372         while (c->last != idx) {
2373                 for (n = 0; n < CONSOLE_LINE_MAX - 2; n++) {
2374                         if (c->last == idx) {
2375                                 /* This would output a partial line.
2376                                  * Instead, back up
2377                                  * the buffer pointer and output this
2378                                  * line next time around.
2379                                  */
2380                                 if (c->last >= n)
2381                                         c->last -= n;
2382                                 else
2383                                         c->last = c->bufsize - n;
2384                                 goto break2;
2385                         }
2386                         ch = c->buf[c->last];
2387                         c->last = (c->last + 1) % c->bufsize;
2388                         if (ch == '\n')
2389                                 break;
2390                         line[n] = ch;
2391                 }
2392
2393                 if (n > 0) {
2394                         if (line[n - 1] == '\r')
2395                                 n--;
2396                         line[n] = 0;
2397                         pr_debug("CONSOLE: %s\n", line);
2398                 }
2399         }
2400 break2:
2401
2402         return 0;
2403 }
2404 #endif                          /* DEBUG */
2405
2406 static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
2407 {
2408         int i;
2409         int ret;
2410
2411         bus->ctrl_frame_stat = false;
2412         ret = brcmf_sdcard_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
2413                                     SDIO_FUNC_2, F2SYNC, frame, len);
2414
2415         if (ret < 0) {
2416                 /* On failure, abort the command and terminate the frame */
2417                 brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
2418                           ret);
2419                 bus->sdcnt.tx_sderrs++;
2420
2421                 brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
2422
2423                 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
2424                                  SFC_WF_TERM, NULL);
2425                 bus->sdcnt.f1regdata++;
2426
2427                 for (i = 0; i < 3; i++) {
2428                         u8 hi, lo;
2429                         hi = brcmf_sdio_regrb(bus->sdiodev,
2430                                               SBSDIO_FUNC1_WFRAMEBCHI, NULL);
2431                         lo = brcmf_sdio_regrb(bus->sdiodev,
2432                                               SBSDIO_FUNC1_WFRAMEBCLO, NULL);
2433                         bus->sdcnt.f1regdata += 2;
2434                         if (hi == 0 && lo == 0)
2435                                 break;
2436                 }
2437                 return ret;
2438         }
2439
2440         bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
2441
2442         return ret;
2443 }
2444
2445 static int
2446 brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
2447 {
2448         u8 *frame;
2449         u16 len;
2450         u32 swheader;
2451         uint retries = 0;
2452         u8 doff = 0;
2453         int ret = -1;
2454         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2455         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2456         struct brcmf_sdio *bus = sdiodev->bus;
2457
2458         brcmf_dbg(TRACE, "Enter\n");
2459
2460         /* Back the pointer to make a room for bus header */
2461         frame = msg - SDPCM_HDRLEN;
2462         len = (msglen += SDPCM_HDRLEN);
2463
2464         /* Add alignment padding (optional for ctl frames) */
2465         doff = ((unsigned long)frame % BRCMF_SDALIGN);
2466         if (doff) {
2467                 frame -= doff;
2468                 len += doff;
2469                 msglen += doff;
2470                 memset(frame, 0, doff + SDPCM_HDRLEN);
2471         }
2472         /* precondition: doff < BRCMF_SDALIGN */
2473         doff += SDPCM_HDRLEN;
2474
2475         /* Round send length to next SDIO block */
2476         if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
2477                 u16 pad = bus->blocksize - (len % bus->blocksize);
2478                 if ((pad <= bus->roundup) && (pad < bus->blocksize))
2479                         len += pad;
2480         } else if (len % BRCMF_SDALIGN) {
2481                 len += BRCMF_SDALIGN - (len % BRCMF_SDALIGN);
2482         }
2483
2484         /* Satisfy length-alignment requirements */
2485         if (len & (ALIGNMENT - 1))
2486                 len = roundup(len, ALIGNMENT);
2487
2488         /* precondition: IS_ALIGNED((unsigned long)frame, 2) */
2489
2490         /* Make sure backplane clock is on */
2491         sdio_claim_host(bus->sdiodev->func[1]);
2492         brcmf_sdbrcm_bus_sleep(bus, false, false);
2493         sdio_release_host(bus->sdiodev->func[1]);
2494
2495         /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */
2496         *(__le16 *) frame = cpu_to_le16((u16) msglen);
2497         *(((__le16 *) frame) + 1) = cpu_to_le16(~msglen);
2498
2499         /* Software tag: channel, sequence number, data offset */
2500         swheader =
2501             ((SDPCM_CONTROL_CHANNEL << SDPCM_CHANNEL_SHIFT) &
2502              SDPCM_CHANNEL_MASK)
2503             | bus->tx_seq | ((doff << SDPCM_DOFFSET_SHIFT) &
2504                              SDPCM_DOFFSET_MASK);
2505         put_unaligned_le32(swheader, frame + SDPCM_FRAMETAG_LEN);
2506         put_unaligned_le32(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader));
2507
2508         if (!data_ok(bus)) {
2509                 brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n",
2510                           bus->tx_max, bus->tx_seq);
2511                 bus->ctrl_frame_stat = true;
2512                 /* Send from dpc */
2513                 bus->ctrl_frame_buf = frame;
2514                 bus->ctrl_frame_len = len;
2515
2516                 wait_event_interruptible_timeout(bus->ctrl_wait,
2517                                                  !bus->ctrl_frame_stat,
2518                                                  msecs_to_jiffies(2000));
2519
2520                 if (!bus->ctrl_frame_stat) {
2521                         brcmf_dbg(SDIO, "ctrl_frame_stat == false\n");
2522                         ret = 0;
2523                 } else {
2524                         brcmf_dbg(SDIO, "ctrl_frame_stat == true\n");
2525                         ret = -1;
2526                 }
2527         }
2528
2529         if (ret == -1) {
2530                 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
2531                                    frame, len, "Tx Frame:\n");
2532                 brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) &&
2533                                    BRCMF_HDRS_ON(),
2534                                    frame, min_t(u16, len, 16), "TxHdr:\n");
2535
2536                 do {
2537                         sdio_claim_host(bus->sdiodev->func[1]);
2538                         ret = brcmf_tx_frame(bus, frame, len);
2539                         sdio_release_host(bus->sdiodev->func[1]);
2540                 } while (ret < 0 && retries++ < TXRETRIES);
2541         }
2542
2543         if ((bus->idletime == BRCMF_IDLE_IMMEDIATE) &&
2544             atomic_read(&bus->dpc_tskcnt) == 0) {
2545                 bus->activity = false;
2546                 sdio_claim_host(bus->sdiodev->func[1]);
2547                 brcmf_dbg(INFO, "idle\n");
2548                 brcmf_sdbrcm_clkctl(bus, CLK_NONE, true);
2549                 sdio_release_host(bus->sdiodev->func[1]);
2550         }
2551
2552         if (ret)
2553                 bus->sdcnt.tx_ctlerrs++;
2554         else
2555                 bus->sdcnt.tx_ctlpkts++;
2556
2557         return ret ? -EIO : 0;
2558 }
2559
2560 #ifdef DEBUG
2561 static inline bool brcmf_sdio_valid_shared_address(u32 addr)
2562 {
2563         return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff));
2564 }
2565
2566 static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
2567                                  struct sdpcm_shared *sh)
2568 {
2569         u32 addr;
2570         int rv;
2571         u32 shaddr = 0;
2572         struct sdpcm_shared_le sh_le;
2573         __le32 addr_le;
2574
2575         shaddr = bus->ci->rambase + bus->ramsize - 4;
2576
2577         /*
2578          * Read last word in socram to determine
2579          * address of sdpcm_shared structure
2580          */
2581         sdio_claim_host(bus->sdiodev->func[1]);
2582         brcmf_sdbrcm_bus_sleep(bus, false, false);
2583         rv = brcmf_sdio_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
2584         sdio_release_host(bus->sdiodev->func[1]);
2585         if (rv < 0)
2586                 return rv;
2587
2588         addr = le32_to_cpu(addr_le);
2589
2590         brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr);
2591
2592         /*
2593          * Check if addr is valid.
2594          * NVRAM length at the end of memory should have been overwritten.
2595          */
2596         if (!brcmf_sdio_valid_shared_address(addr)) {
2597                         brcmf_err("invalid sdpcm_shared address 0x%08X\n",
2598                                   addr);
2599                         return -EINVAL;
2600         }
2601
2602         /* Read hndrte_shared structure */
2603         rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
2604                               sizeof(struct sdpcm_shared_le));
2605         if (rv < 0)
2606                 return rv;
2607
2608         /* Endianness */
2609         sh->flags = le32_to_cpu(sh_le.flags);
2610         sh->trap_addr = le32_to_cpu(sh_le.trap_addr);
2611         sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr);
2612         sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr);
2613         sh->assert_line = le32_to_cpu(sh_le.assert_line);
2614         sh->console_addr = le32_to_cpu(sh_le.console_addr);
2615         sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr);
2616
2617         if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) {
2618                 brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n",
2619                           SDPCM_SHARED_VERSION,
2620                           sh->flags & SDPCM_SHARED_VERSION_MASK);
2621                 return -EPROTO;
2622         }
2623
2624         return 0;
2625 }
2626
2627 static int brcmf_sdio_dump_console(struct brcmf_sdio *bus,
2628                                    struct sdpcm_shared *sh, char __user *data,
2629                                    size_t count)
2630 {
2631         u32 addr, console_ptr, console_size, console_index;
2632         char *conbuf = NULL;
2633         __le32 sh_val;
2634         int rv;
2635         loff_t pos = 0;
2636         int nbytes = 0;
2637
2638         /* obtain console information from device memory */
2639         addr = sh->console_addr + offsetof(struct rte_console, log_le);
2640         rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr,
2641                               (u8 *)&sh_val, sizeof(u32));
2642         if (rv < 0)
2643                 return rv;
2644         console_ptr = le32_to_cpu(sh_val);
2645
2646         addr = sh->console_addr + offsetof(struct rte_console, log_le.buf_size);
2647         rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr,
2648                               (u8 *)&sh_val, sizeof(u32));
2649         if (rv < 0)
2650                 return rv;
2651         console_size = le32_to_cpu(sh_val);
2652
2653         addr = sh->console_addr + offsetof(struct rte_console, log_le.idx);
2654         rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr,
2655                               (u8 *)&sh_val, sizeof(u32));
2656         if (rv < 0)
2657                 return rv;
2658         console_index = le32_to_cpu(sh_val);
2659
2660         /* allocate buffer for console data */
2661         if (console_size <= CONSOLE_BUFFER_MAX)
2662                 conbuf = vzalloc(console_size+1);
2663
2664         if (!conbuf)
2665                 return -ENOMEM;
2666
2667         /* obtain the console data from device */
2668         conbuf[console_size] = '\0';
2669         rv = brcmf_sdio_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf,
2670                               console_size);
2671         if (rv < 0)
2672                 goto done;
2673
2674         rv = simple_read_from_buffer(data, count, &pos,
2675                                      conbuf + console_index,
2676                                      console_size - console_index);
2677         if (rv < 0)
2678                 goto done;
2679
2680         nbytes = rv;
2681         if (console_index > 0) {
2682                 pos = 0;
2683                 rv = simple_read_from_buffer(data+nbytes, count, &pos,
2684                                              conbuf, console_index - 1);
2685                 if (rv < 0)
2686                         goto done;
2687                 rv += nbytes;
2688         }
2689 done:
2690         vfree(conbuf);
2691         return rv;
2692 }
2693
2694 static int brcmf_sdio_trap_info(struct brcmf_sdio *bus, struct sdpcm_shared *sh,
2695                                 char __user *data, size_t count)
2696 {
2697         int error, res;
2698         char buf[350];
2699         struct brcmf_trap_info tr;
2700         loff_t pos = 0;
2701
2702         if ((sh->flags & SDPCM_SHARED_TRAP) == 0) {
2703                 brcmf_dbg(INFO, "no trap in firmware\n");
2704                 return 0;
2705         }
2706
2707         error = brcmf_sdio_ramrw(bus->sdiodev, false, sh->trap_addr, (u8 *)&tr,
2708                                  sizeof(struct brcmf_trap_info));
2709         if (error < 0)
2710                 return error;
2711
2712         res = scnprintf(buf, sizeof(buf),
2713                         "dongle trap info: type 0x%x @ epc 0x%08x\n"
2714                         "  cpsr 0x%08x spsr 0x%08x sp 0x%08x\n"
2715                         "  lr   0x%08x pc   0x%08x offset 0x%x\n"
2716                         "  r0   0x%08x r1   0x%08x r2 0x%08x r3 0x%08x\n"
2717                         "  r4   0x%08x r5   0x%08x r6 0x%08x r7 0x%08x\n",
2718                         le32_to_cpu(tr.type), le32_to_cpu(tr.epc),
2719                         le32_to_cpu(tr.cpsr), le32_to_cpu(tr.spsr),
2720                         le32_to_cpu(tr.r13), le32_to_cpu(tr.r14),
2721                         le32_to_cpu(tr.pc), sh->trap_addr,
2722                         le32_to_cpu(tr.r0), le32_to_cpu(tr.r1),
2723                         le32_to_cpu(tr.r2), le32_to_cpu(tr.r3),
2724                         le32_to_cpu(tr.r4), le32_to_cpu(tr.r5),
2725                         le32_to_cpu(tr.r6), le32_to_cpu(tr.r7));
2726
2727         return simple_read_from_buffer(data, count, &pos, buf, res);
2728 }
2729
2730 static int brcmf_sdio_assert_info(struct brcmf_sdio *bus,
2731                                   struct sdpcm_shared *sh, char __user *data,
2732                                   size_t count)
2733 {
2734         int error = 0;
2735         char buf[200];
2736         char file[80] = "?";
2737         char expr[80] = "<???>";
2738         int res;
2739         loff_t pos = 0;
2740
2741         if ((sh->flags & SDPCM_SHARED_ASSERT_BUILT) == 0) {
2742                 brcmf_dbg(INFO, "firmware not built with -assert\n");
2743                 return 0;
2744         } else if ((sh->flags & SDPCM_SHARED_ASSERT) == 0) {
2745                 brcmf_dbg(INFO, "no assert in dongle\n");
2746                 return 0;
2747         }
2748
2749         sdio_claim_host(bus->sdiodev->func[1]);
2750         if (sh->assert_file_addr != 0) {
2751                 error = brcmf_sdio_ramrw(bus->sdiodev, false,
2752                                          sh->assert_file_addr, (u8 *)file, 80);
2753                 if (error < 0)
2754                         return error;
2755         }
2756         if (sh->assert_exp_addr != 0) {
2757                 error = brcmf_sdio_ramrw(bus->sdiodev, false,
2758                                          sh->assert_exp_addr, (u8 *)expr, 80);
2759                 if (error < 0)
2760                         return error;
2761         }
2762         sdio_release_host(bus->sdiodev->func[1]);
2763
2764         res = scnprintf(buf, sizeof(buf),
2765                         "dongle assert: %s:%d: assert(%s)\n",
2766                         file, sh->assert_line, expr);
2767         return simple_read_from_buffer(data, count, &pos, buf, res);
2768 }
2769
2770 static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus)
2771 {
2772         int error;
2773         struct sdpcm_shared sh;
2774
2775         error = brcmf_sdio_readshared(bus, &sh);
2776
2777         if (error < 0)
2778                 return error;
2779
2780         if ((sh.flags & SDPCM_SHARED_ASSERT_BUILT) == 0)
2781                 brcmf_dbg(INFO, "firmware not built with -assert\n");
2782         else if (sh.flags & SDPCM_SHARED_ASSERT)
2783                 brcmf_err("assertion in dongle\n");
2784
2785         if (sh.flags & SDPCM_SHARED_TRAP)
2786                 brcmf_err("firmware trap in dongle\n");
2787
2788         return 0;
2789 }
2790
2791 static int brcmf_sdbrcm_died_dump(struct brcmf_sdio *bus, char __user *data,
2792                                   size_t count, loff_t *ppos)
2793 {
2794         int error = 0;
2795         struct sdpcm_shared sh;
2796         int nbytes = 0;
2797         loff_t pos = *ppos;
2798
2799         if (pos != 0)
2800                 return 0;
2801
2802         error = brcmf_sdio_readshared(bus, &sh);
2803         if (error < 0)
2804                 goto done;
2805
2806         error = brcmf_sdio_assert_info(bus, &sh, data, count);
2807         if (error < 0)
2808                 goto done;
2809         nbytes = error;
2810
2811         error = brcmf_sdio_trap_info(bus, &sh, data+nbytes, count);
2812         if (error < 0)
2813                 goto done;
2814         nbytes += error;
2815
2816         error = brcmf_sdio_dump_console(bus, &sh, data+nbytes, count);
2817         if (error < 0)
2818                 goto done;
2819         nbytes += error;
2820
2821         error = nbytes;
2822         *ppos += nbytes;
2823 done:
2824         return error;
2825 }
2826
2827 static ssize_t brcmf_sdio_forensic_read(struct file *f, char __user *data,
2828                                         size_t count, loff_t *ppos)
2829 {
2830         struct brcmf_sdio *bus = f->private_data;
2831         int res;
2832
2833         res = brcmf_sdbrcm_died_dump(bus, data, count, ppos);
2834         if (res > 0)
2835                 *ppos += res;
2836         return (ssize_t)res;
2837 }
2838
2839 static const struct file_operations brcmf_sdio_forensic_ops = {
2840         .owner = THIS_MODULE,
2841         .open = simple_open,
2842         .read = brcmf_sdio_forensic_read
2843 };
2844
2845 static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
2846 {
2847         struct brcmf_pub *drvr = bus->sdiodev->bus_if->drvr;
2848         struct dentry *dentry = brcmf_debugfs_get_devdir(drvr);
2849
2850         if (IS_ERR_OR_NULL(dentry))
2851                 return;
2852
2853         debugfs_create_file("forensics", S_IRUGO, dentry, bus,
2854                             &brcmf_sdio_forensic_ops);
2855         brcmf_debugfs_create_sdio_count(drvr, &bus->sdcnt);
2856 }
2857 #else
2858 static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus)
2859 {
2860         return 0;
2861 }
2862
2863 static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
2864 {
2865 }
2866 #endif /* DEBUG */
2867
2868 static int
2869 brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
2870 {
2871         int timeleft;
2872         uint rxlen = 0;
2873         bool pending;
2874         u8 *buf;
2875         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2876         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2877         struct brcmf_sdio *bus = sdiodev->bus;
2878
2879         brcmf_dbg(TRACE, "Enter\n");
2880
2881         /* Wait until control frame is available */
2882         timeleft = brcmf_sdbrcm_dcmd_resp_wait(bus, &bus->rxlen, &pending);
2883
2884         spin_lock_bh(&bus->rxctl_lock);
2885         rxlen = bus->rxlen;
2886         memcpy(msg, bus->rxctl, min(msglen, rxlen));
2887         bus->rxctl = NULL;
2888         buf = bus->rxctl_orig;
2889         bus->rxctl_orig = NULL;
2890         bus->rxlen = 0;
2891         spin_unlock_bh(&bus->rxctl_lock);
2892         vfree(buf);
2893
2894         if (rxlen) {
2895                 brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n",
2896                           rxlen, msglen);
2897         } else if (timeleft == 0) {
2898                 brcmf_err("resumed on timeout\n");
2899                 brcmf_sdbrcm_checkdied(bus);
2900         } else if (pending) {
2901                 brcmf_dbg(CTL, "cancelled\n");
2902                 return -ERESTARTSYS;
2903         } else {
2904                 brcmf_dbg(CTL, "resumed for unknown reason?\n");
2905                 brcmf_sdbrcm_checkdied(bus);
2906         }
2907
2908         if (rxlen)
2909                 bus->sdcnt.rx_ctlpkts++;
2910         else
2911                 bus->sdcnt.rx_ctlerrs++;
2912
2913         return rxlen ? (int)rxlen : -ETIMEDOUT;
2914 }
2915
2916 static bool brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter)
2917 {
2918         struct chip_info *ci = bus->ci;
2919
2920         /* To enter download state, disable ARM and reset SOCRAM.
2921          * To exit download state, simply reset ARM (default is RAM boot).
2922          */
2923         if (enter) {
2924                 bus->alp_only = true;
2925
2926                 brcmf_sdio_chip_enter_download(bus->sdiodev, ci);
2927         } else {
2928                 if (!brcmf_sdio_chip_exit_download(bus->sdiodev, ci, bus->vars,
2929                                                    bus->varsz))
2930                         return false;
2931
2932                 /* Allow HT Clock now that the ARM is running. */
2933                 bus->alp_only = false;
2934
2935                 bus->sdiodev->bus_if->state = BRCMF_BUS_LOAD;
2936         }
2937
2938         return true;
2939 }
2940
2941 static int brcmf_sdbrcm_get_image(char *buf, int len, struct brcmf_sdio *bus)
2942 {
2943         if (bus->firmware->size < bus->fw_ptr + len)
2944                 len = bus->firmware->size - bus->fw_ptr;
2945
2946         memcpy(buf, &bus->firmware->data[bus->fw_ptr], len);
2947         bus->fw_ptr += len;
2948         return len;
2949 }
2950
2951 static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus)
2952 {
2953         int offset;
2954         uint len;
2955         u8 *memblock = NULL, *memptr;
2956         int ret;
2957         u8 idx;
2958
2959         brcmf_dbg(INFO, "Enter\n");
2960
2961         ret = request_firmware(&bus->firmware, BRCMF_SDIO_FW_NAME,
2962                                &bus->sdiodev->func[2]->dev);
2963         if (ret) {
2964                 brcmf_err("Fail to request firmware %d\n", ret);
2965                 return ret;
2966         }
2967         bus->fw_ptr = 0;
2968
2969         memptr = memblock = kmalloc(MEMBLOCK + BRCMF_SDALIGN, GFP_ATOMIC);
2970         if (memblock == NULL) {
2971                 ret = -ENOMEM;
2972                 goto err;
2973         }
2974         if ((u32)(unsigned long)memblock % BRCMF_SDALIGN)
2975                 memptr += (BRCMF_SDALIGN -
2976                            ((u32)(unsigned long)memblock % BRCMF_SDALIGN));
2977
2978         offset = bus->ci->rambase;
2979
2980         /* Download image */
2981         len = brcmf_sdbrcm_get_image((char *)memptr, MEMBLOCK, bus);
2982         idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_ARM_CR4);
2983         if (BRCMF_MAX_CORENUM != idx)
2984                 memcpy(&bus->ci->rst_vec, memptr, sizeof(bus->ci->rst_vec));
2985         while (len) {
2986                 ret = brcmf_sdio_ramrw(bus->sdiodev, true, offset, memptr, len);
2987                 if (ret) {
2988                         brcmf_err("error %d on writing %d membytes at 0x%08x\n",
2989                                   ret, MEMBLOCK, offset);
2990                         goto err;
2991                 }
2992
2993                 offset += MEMBLOCK;
2994                 len = brcmf_sdbrcm_get_image((char *)memptr, MEMBLOCK, bus);
2995         }
2996
2997 err:
2998         kfree(memblock);
2999
3000         release_firmware(bus->firmware);
3001         bus->fw_ptr = 0;
3002
3003         return ret;
3004 }
3005
3006 /*
3007  * ProcessVars:Takes a buffer of "<var>=<value>\n" lines read from a file
3008  * and ending in a NUL.
3009  * Removes carriage returns, empty lines, comment lines, and converts
3010  * newlines to NULs.
3011  * Shortens buffer as needed and pads with NULs.  End of buffer is marked
3012  * by two NULs.
3013 */
3014
3015 static int brcmf_process_nvram_vars(struct brcmf_sdio *bus)
3016 {
3017         char *varbuf;
3018         char *dp;
3019         bool findNewline;
3020         int column;
3021         int ret = 0;
3022         uint buf_len, n, len;
3023
3024         len = bus->firmware->size;
3025         varbuf = vmalloc(len);
3026         if (!varbuf)
3027                 return -ENOMEM;
3028
3029         memcpy(varbuf, bus->firmware->data, len);
3030         dp = varbuf;
3031
3032         findNewline = false;
3033         column = 0;
3034
3035         for (n = 0; n < len; n++) {
3036                 if (varbuf[n] == 0)
3037                         break;
3038                 if (varbuf[n] == '\r')
3039                         continue;
3040                 if (findNewline && varbuf[n] != '\n')
3041                         continue;
3042                 findNewline = false;
3043                 if (varbuf[n] == '#') {
3044                         findNewline = true;
3045                         continue;
3046                 }
3047                 if (varbuf[n] == '\n') {
3048                         if (column == 0)
3049                                 continue;
3050                         *dp++ = 0;
3051                         column = 0;
3052                         continue;
3053                 }
3054                 *dp++ = varbuf[n];
3055                 column++;
3056         }
3057         buf_len = dp - varbuf;
3058         while (dp < varbuf + n)
3059                 *dp++ = 0;
3060
3061         kfree(bus->vars);
3062         /* roundup needed for download to device */
3063         bus->varsz = roundup(buf_len + 1, 4);
3064         bus->vars = kmalloc(bus->varsz, GFP_KERNEL);
3065         if (bus->vars == NULL) {
3066                 bus->varsz = 0;
3067                 ret = -ENOMEM;
3068                 goto err;
3069         }
3070
3071         /* copy the processed variables and add null termination */
3072         memcpy(bus->vars, varbuf, buf_len);
3073         bus->vars[buf_len] = 0;
3074 err:
3075         vfree(varbuf);
3076         return ret;
3077 }
3078
3079 static int brcmf_sdbrcm_download_nvram(struct brcmf_sdio *bus)
3080 {
3081         int ret;
3082
3083         ret = request_firmware(&bus->firmware, BRCMF_SDIO_NV_NAME,
3084                                &bus->sdiodev->func[2]->dev);
3085         if (ret) {
3086                 brcmf_err("Fail to request nvram %d\n", ret);
3087                 return ret;
3088         }
3089
3090         ret = brcmf_process_nvram_vars(bus);
3091
3092         release_firmware(bus->firmware);
3093
3094         return ret;
3095 }
3096
3097 static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
3098 {
3099         int bcmerror = -1;
3100
3101         /* Keep arm in reset */
3102         if (!brcmf_sdbrcm_download_state(bus, true)) {
3103                 brcmf_err("error placing ARM core in reset\n");
3104                 goto err;
3105         }
3106
3107         if (brcmf_sdbrcm_download_code_file(bus)) {
3108                 brcmf_err("dongle image file download failed\n");
3109                 goto err;
3110         }
3111
3112         if (brcmf_sdbrcm_download_nvram(bus)) {
3113                 brcmf_err("dongle nvram file download failed\n");
3114                 goto err;
3115         }
3116
3117         /* Take arm out of reset */
3118         if (!brcmf_sdbrcm_download_state(bus, false)) {
3119                 brcmf_err("error getting out of ARM core reset\n");
3120                 goto err;
3121         }
3122
3123         bcmerror = 0;
3124
3125 err:
3126         return bcmerror;
3127 }
3128
3129 static bool brcmf_sdbrcm_sr_capable(struct brcmf_sdio *bus)
3130 {
3131         u32 addr, reg;
3132
3133         brcmf_dbg(TRACE, "Enter\n");
3134
3135         /* old chips with PMU version less than 17 don't support save restore */
3136         if (bus->ci->pmurev < 17)
3137                 return false;
3138
3139         /* read PMU chipcontrol register 3*/
3140         addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr);
3141         brcmf_sdio_regwl(bus->sdiodev, addr, 3, NULL);
3142         addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data);
3143         reg = brcmf_sdio_regrl(bus->sdiodev, addr, NULL);
3144
3145         return (bool)reg;
3146 }
3147
3148 static void brcmf_sdbrcm_sr_init(struct brcmf_sdio *bus)
3149 {
3150         int err = 0;
3151         u8 val;
3152
3153         brcmf_dbg(TRACE, "Enter\n");
3154
3155         val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL,
3156                                &err);
3157         if (err) {
3158                 brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n");
3159                 return;
3160         }
3161
3162         val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
3163         brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL,
3164                          val, &err);
3165         if (err) {
3166                 brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n");
3167                 return;
3168         }
3169
3170         /* Add CMD14 Support */
3171         brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
3172                          (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
3173                           SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
3174                          &err);
3175         if (err) {
3176                 brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n");
3177                 return;
3178         }
3179
3180         brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
3181                          SBSDIO_FORCE_HT, &err);
3182         if (err) {
3183                 brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n");
3184                 return;
3185         }
3186
3187         /* set flag */
3188         bus->sr_enabled = true;
3189         brcmf_dbg(INFO, "SR enabled\n");
3190 }
3191
3192 /* enable KSO bit */
3193 static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus)
3194 {
3195         u8 val;
3196         int err = 0;
3197
3198         brcmf_dbg(TRACE, "Enter\n");
3199
3200         /* KSO bit added in SDIO core rev 12 */
3201         if (bus->ci->c_inf[1].rev < 12)
3202                 return 0;
3203
3204         val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
3205                                &err);
3206         if (err) {
3207                 brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n");
3208                 return err;
3209         }
3210
3211         if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) {
3212                 val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN <<
3213                         SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
3214                 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
3215                                  val, &err);
3216                 if (err) {
3217                         brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n");
3218                         return err;
3219                 }
3220         }
3221
3222         return 0;
3223 }
3224
3225
3226 static bool
3227 brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
3228 {
3229         bool ret;
3230
3231         sdio_claim_host(bus->sdiodev->func[1]);
3232
3233         brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3234
3235         ret = _brcmf_sdbrcm_download_firmware(bus) == 0;
3236
3237         brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
3238
3239         sdio_release_host(bus->sdiodev->func[1]);
3240
3241         return ret;
3242 }
3243
3244 static int brcmf_sdbrcm_bus_init(struct device *dev)
3245 {
3246         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
3247         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
3248         struct brcmf_sdio *bus = sdiodev->bus;
3249         unsigned long timeout;
3250         u8 ready, enable;
3251         int err, ret = 0;
3252         u8 saveclk;
3253
3254         brcmf_dbg(TRACE, "Enter\n");
3255
3256         /* try to download image and nvram to the dongle */
3257         if (bus_if->state == BRCMF_BUS_DOWN) {
3258                 if (!(brcmf_sdbrcm_download_firmware(bus)))
3259                         return -1;
3260         }
3261
3262         if (!bus->sdiodev->bus_if->drvr)
3263                 return 0;
3264
3265         /* Start the watchdog timer */
3266         bus->sdcnt.tickcnt = 0;
3267         brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
3268
3269         sdio_claim_host(bus->sdiodev->func[1]);
3270
3271         /* Make sure backplane clock is on, needed to generate F2 interrupt */
3272         brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3273         if (bus->clkstate != CLK_AVAIL)
3274                 goto exit;
3275
3276         /* Force clocks on backplane to be sure F2 interrupt propagates */
3277         saveclk = brcmf_sdio_regrb(bus->sdiodev,
3278                                    SBSDIO_FUNC1_CHIPCLKCSR, &err);
3279         if (!err) {
3280                 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
3281                                  (saveclk | SBSDIO_FORCE_HT), &err);
3282         }
3283         if (err) {
3284                 brcmf_err("Failed to force clock for F2: err %d\n", err);
3285                 goto exit;
3286         }
3287
3288         /* Enable function 2 (frame transfers) */
3289         w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
3290                   offsetof(struct sdpcmd_regs, tosbmailboxdata));
3291         enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2);
3292
3293         brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
3294
3295         timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY);
3296         ready = 0;
3297         while (enable != ready) {
3298                 ready = brcmf_sdio_regrb(bus->sdiodev,
3299                                          SDIO_CCCR_IORx, NULL);
3300                 if (time_after(jiffies, timeout))
3301                         break;
3302                 else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50))
3303                         /* prevent busy waiting if it takes too long */
3304                         msleep_interruptible(20);
3305         }
3306
3307         brcmf_dbg(INFO, "enable 0x%02x, ready 0x%02x\n", enable, ready);
3308
3309         /* If F2 successfully enabled, set core and enable interrupts */
3310         if (ready == enable) {
3311                 /* Set up the interrupt mask and enable interrupts */
3312                 bus->hostintmask = HOSTINTMASK;
3313                 w_sdreg32(bus, bus->hostintmask,
3314                           offsetof(struct sdpcmd_regs, hostintmask));
3315
3316                 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err);
3317         } else {
3318                 /* Disable F2 again */
3319                 enable = SDIO_FUNC_ENABLE_1;
3320                 brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
3321                 ret = -ENODEV;
3322         }
3323
3324         if (brcmf_sdbrcm_sr_capable(bus)) {
3325                 brcmf_sdbrcm_sr_init(bus);
3326         } else {
3327                 /* Restore previous clock setting */
3328                 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
3329                                  saveclk, &err);
3330         }
3331
3332         if (ret == 0) {
3333                 ret = brcmf_sdio_intr_register(bus->sdiodev);
3334                 if (ret != 0)
3335                         brcmf_err("intr register failed:%d\n", ret);
3336         }
3337
3338         /* If we didn't come up, turn off backplane clock */
3339         if (bus_if->state != BRCMF_BUS_DATA)
3340                 brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
3341
3342 exit:
3343         sdio_release_host(bus->sdiodev->func[1]);
3344
3345         return ret;
3346 }
3347
3348 void brcmf_sdbrcm_isr(void *arg)
3349 {
3350         struct brcmf_sdio *bus = (struct brcmf_sdio *) arg;
3351
3352         brcmf_dbg(TRACE, "Enter\n");
3353
3354         if (!bus) {
3355                 brcmf_err("bus is null pointer, exiting\n");
3356                 return;
3357         }
3358
3359         if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
3360                 brcmf_err("bus is down. we have nothing to do\n");
3361                 return;
3362         }
3363         /* Count the interrupt call */
3364         bus->sdcnt.intrcount++;
3365         if (in_interrupt())
3366                 atomic_set(&bus->ipend, 1);
3367         else
3368                 if (brcmf_sdio_intr_rstatus(bus)) {
3369                         brcmf_err("failed backplane access\n");
3370                         bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
3371                 }
3372
3373         /* Disable additional interrupts (is this needed now)? */
3374         if (!bus->intr)
3375                 brcmf_err("isr w/o interrupt configured!\n");
3376
3377         atomic_inc(&bus->dpc_tskcnt);
3378         queue_work(bus->brcmf_wq, &bus->datawork);
3379 }
3380
3381 static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
3382 {
3383 #ifdef DEBUG
3384         struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev);
3385 #endif  /* DEBUG */
3386
3387         brcmf_dbg(TIMER, "Enter\n");
3388
3389         /* Poll period: check device if appropriate. */
3390         if (!bus->sr_enabled &&
3391             bus->poll && (++bus->polltick >= bus->pollrate)) {
3392                 u32 intstatus = 0;
3393
3394                 /* Reset poll tick */
3395                 bus->polltick = 0;
3396
3397                 /* Check device if no interrupts */
3398                 if (!bus->intr ||
3399                     (bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) {
3400
3401                         if (atomic_read(&bus->dpc_tskcnt) == 0) {
3402                                 u8 devpend;
3403
3404                                 sdio_claim_host(bus->sdiodev->func[1]);
3405                                 devpend = brcmf_sdio_regrb(bus->sdiodev,
3406                                                            SDIO_CCCR_INTx,
3407                                                            NULL);
3408                                 sdio_release_host(bus->sdiodev->func[1]);
3409                                 intstatus =
3410                                     devpend & (INTR_STATUS_FUNC1 |
3411                                                INTR_STATUS_FUNC2);
3412                         }
3413
3414                         /* If there is something, make like the ISR and
3415                                  schedule the DPC */
3416                         if (intstatus) {
3417                                 bus->sdcnt.pollcnt++;
3418                                 atomic_set(&bus->ipend, 1);
3419
3420                                 atomic_inc(&bus->dpc_tskcnt);
3421                                 queue_work(bus->brcmf_wq, &bus->datawork);
3422                         }
3423                 }
3424
3425                 /* Update interrupt tracking */
3426                 bus->sdcnt.lastintrs = bus->sdcnt.intrcount;
3427         }
3428 #ifdef DEBUG
3429         /* Poll for console output periodically */
3430         if (bus_if && bus_if->state == BRCMF_BUS_DATA &&
3431             bus->console_interval != 0) {
3432                 bus->console.count += BRCMF_WD_POLL_MS;
3433                 if (bus->console.count >= bus->console_interval) {
3434                         bus->console.count -= bus->console_interval;
3435                         sdio_claim_host(bus->sdiodev->func[1]);
3436                         /* Make sure backplane clock is on */
3437                         brcmf_sdbrcm_bus_sleep(bus, false, false);
3438                         if (brcmf_sdbrcm_readconsole(bus) < 0)
3439                                 /* stop on error */
3440                                 bus->console_interval = 0;
3441                         sdio_release_host(bus->sdiodev->func[1]);
3442                 }
3443         }
3444 #endif                          /* DEBUG */
3445
3446         /* On idle timeout clear activity flag and/or turn off clock */
3447         if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
3448                 if (++bus->idlecount >= bus->idletime) {
3449                         bus->idlecount = 0;
3450                         if (bus->activity) {
3451                                 bus->activity = false;
3452                                 brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
3453                         } else {
3454                                 brcmf_dbg(SDIO, "idle\n");
3455                                 sdio_claim_host(bus->sdiodev->func[1]);
3456                                 brcmf_sdbrcm_bus_sleep(bus, true, false);
3457                                 sdio_release_host(bus->sdiodev->func[1]);
3458                         }
3459                 }
3460         }
3461
3462         return (atomic_read(&bus->ipend) > 0);
3463 }
3464
3465 static void brcmf_sdio_dataworker(struct work_struct *work)
3466 {
3467         struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio,
3468                                               datawork);
3469
3470         while (atomic_read(&bus->dpc_tskcnt)) {
3471                 brcmf_sdbrcm_dpc(bus);
3472                 atomic_dec(&bus->dpc_tskcnt);
3473         }
3474 }
3475
3476 static void brcmf_sdbrcm_release_malloc(struct brcmf_sdio *bus)
3477 {
3478         brcmf_dbg(TRACE, "Enter\n");
3479
3480         kfree(bus->rxbuf);
3481         bus->rxctl = bus->rxbuf = NULL;
3482         bus->rxlen = 0;
3483 }
3484
3485 static bool brcmf_sdbrcm_probe_malloc(struct brcmf_sdio *bus)
3486 {
3487         brcmf_dbg(TRACE, "Enter\n");
3488
3489         if (bus->sdiodev->bus_if->maxctl) {
3490                 bus->rxblen =
3491                     roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN),
3492                             ALIGNMENT) + BRCMF_SDALIGN;
3493                 bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC);
3494                 if (!(bus->rxbuf))
3495                         return false;
3496         }
3497
3498         return true;
3499 }
3500
3501 static bool
3502 brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
3503 {
3504         u8 clkctl = 0;
3505         int err = 0;
3506         int reg_addr;
3507         u32 reg_val;
3508         u32 drivestrength;
3509
3510         bus->alp_only = true;
3511
3512         sdio_claim_host(bus->sdiodev->func[1]);
3513
3514         pr_debug("F1 signature read @0x18000000=0x%4x\n",
3515                  brcmf_sdio_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
3516
3517         /*
3518          * Force PLL off until brcmf_sdio_chip_attach()
3519          * programs PLL control regs
3520          */
3521
3522         brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
3523                          BRCMF_INIT_CLKCTL1, &err);
3524         if (!err)
3525                 clkctl = brcmf_sdio_regrb(bus->sdiodev,
3526                                           SBSDIO_FUNC1_CHIPCLKCSR, &err);
3527
3528         if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
3529                 brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
3530                           err, BRCMF_INIT_CLKCTL1, clkctl);
3531                 goto fail;
3532         }
3533
3534         if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci, regsva)) {
3535                 brcmf_err("brcmf_sdio_chip_attach failed!\n");
3536                 goto fail;
3537         }
3538
3539         if (brcmf_sdbrcm_kso_init(bus)) {
3540                 brcmf_err("error enabling KSO\n");
3541                 goto fail;
3542         }
3543
3544         if ((bus->sdiodev->pdata) && (bus->sdiodev->pdata->drive_strength))
3545                 drivestrength = bus->sdiodev->pdata->drive_strength;
3546         else
3547                 drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
3548         brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
3549
3550         /* Get info on the SOCRAM cores... */
3551         bus->ramsize = bus->ci->ramsize;
3552         if (!(bus->ramsize)) {
3553                 brcmf_err("failed to find SOCRAM memory!\n");
3554                 goto fail;
3555         }
3556
3557         /* Set card control so an SDIO card reset does a WLAN backplane reset */
3558         reg_val = brcmf_sdio_regrb(bus->sdiodev,
3559                                    SDIO_CCCR_BRCM_CARDCTRL, &err);
3560         if (err)
3561                 goto fail;
3562
3563         reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
3564
3565         brcmf_sdio_regwb(bus->sdiodev,
3566                          SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
3567         if (err)
3568                 goto fail;
3569
3570         /* set PMUControl so a backplane reset does PMU state reload */
3571         reg_addr = CORE_CC_REG(bus->ci->c_inf[0].base,
3572                                pmucontrol);
3573         reg_val = brcmf_sdio_regrl(bus->sdiodev,
3574                                    reg_addr,
3575                                    &err);
3576         if (err)
3577                 goto fail;
3578
3579         reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
3580
3581         brcmf_sdio_regwl(bus->sdiodev,
3582                          reg_addr,
3583                          reg_val,
3584                          &err);
3585         if (err)
3586                 goto fail;
3587
3588
3589         sdio_release_host(bus->sdiodev->func[1]);
3590
3591         brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
3592
3593         /* Locate an appropriately-aligned portion of hdrbuf */
3594         bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0],
3595                                     BRCMF_SDALIGN);
3596
3597         /* Set the poll and/or interrupt flags */
3598         bus->intr = true;
3599         bus->poll = false;
3600         if (bus->poll)
3601                 bus->pollrate = 1;
3602
3603         return true;
3604
3605 fail:
3606         sdio_release_host(bus->sdiodev->func[1]);
3607         return false;
3608 }
3609
3610 static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus)
3611 {
3612         brcmf_dbg(TRACE, "Enter\n");
3613
3614         sdio_claim_host(bus->sdiodev->func[1]);
3615
3616         /* Disable F2 to clear any intermediate frame state on the dongle */
3617         brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx,
3618                          SDIO_FUNC_ENABLE_1, NULL);
3619
3620         bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
3621         bus->rxflow = false;
3622
3623         /* Done with backplane-dependent accesses, can drop clock... */
3624         brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
3625
3626         sdio_release_host(bus->sdiodev->func[1]);
3627
3628         /* ...and initialize clock/power states */
3629         bus->clkstate = CLK_SDONLY;
3630         bus->idletime = BRCMF_IDLE_INTERVAL;
3631         bus->idleclock = BRCMF_IDLE_ACTIVE;
3632
3633         /* Query the F2 block size, set roundup accordingly */
3634         bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
3635         bus->roundup = min(max_roundup, bus->blocksize);
3636
3637         /* SR state */
3638         bus->sleeping = false;
3639         bus->sr_enabled = false;
3640
3641         return true;
3642 }
3643
3644 static int
3645 brcmf_sdbrcm_watchdog_thread(void *data)
3646 {
3647         struct brcmf_sdio *bus = (struct brcmf_sdio *)data;
3648
3649         allow_signal(SIGTERM);
3650         /* Run until signal received */
3651         while (1) {
3652                 if (kthread_should_stop())
3653                         break;
3654                 if (!wait_for_completion_interruptible(&bus->watchdog_wait)) {
3655                         brcmf_sdbrcm_bus_watchdog(bus);
3656                         /* Count the tick for reference */
3657                         bus->sdcnt.tickcnt++;
3658                 } else
3659                         break;
3660         }
3661         return 0;
3662 }
3663
3664 static void
3665 brcmf_sdbrcm_watchdog(unsigned long data)
3666 {
3667         struct brcmf_sdio *bus = (struct brcmf_sdio *)data;
3668
3669         if (bus->watchdog_tsk) {
3670                 complete(&bus->watchdog_wait);
3671                 /* Reschedule the watchdog */
3672                 if (bus->wd_timer_valid)
3673                         mod_timer(&bus->timer,
3674                                   jiffies + BRCMF_WD_POLL_MS * HZ / 1000);
3675         }
3676 }
3677
3678 static void brcmf_sdbrcm_release_dongle(struct brcmf_sdio *bus)
3679 {
3680         brcmf_dbg(TRACE, "Enter\n");
3681
3682         if (bus->ci) {
3683                 sdio_claim_host(bus->sdiodev->func[1]);
3684                 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3685                 brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
3686                 sdio_release_host(bus->sdiodev->func[1]);
3687                 brcmf_sdio_chip_detach(&bus->ci);
3688                 if (bus->vars && bus->varsz)
3689                         kfree(bus->vars);
3690                 bus->vars = NULL;
3691         }
3692
3693         brcmf_dbg(TRACE, "Disconnected\n");
3694 }
3695
3696 /* Detach and free everything */
3697 static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
3698 {
3699         brcmf_dbg(TRACE, "Enter\n");
3700
3701         if (bus) {
3702                 /* De-register interrupt handler */
3703                 brcmf_sdio_intr_unregister(bus->sdiodev);
3704
3705                 cancel_work_sync(&bus->datawork);
3706                 if (bus->brcmf_wq)
3707                         destroy_workqueue(bus->brcmf_wq);
3708
3709                 if (bus->sdiodev->bus_if->drvr) {
3710                         brcmf_detach(bus->sdiodev->dev);
3711                         brcmf_sdbrcm_release_dongle(bus);
3712                 }
3713
3714                 brcmf_sdbrcm_release_malloc(bus);
3715
3716                 kfree(bus);
3717         }
3718
3719         brcmf_dbg(TRACE, "Disconnected\n");
3720 }
3721
3722 static struct brcmf_bus_ops brcmf_sdio_bus_ops = {
3723         .stop = brcmf_sdbrcm_bus_stop,
3724         .init = brcmf_sdbrcm_bus_init,
3725         .txdata = brcmf_sdbrcm_bus_txdata,
3726         .txctl = brcmf_sdbrcm_bus_txctl,
3727         .rxctl = brcmf_sdbrcm_bus_rxctl,
3728         .gettxq = brcmf_sdbrcm_bus_gettxq,
3729 };
3730
3731 void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
3732 {
3733         int ret;
3734         struct brcmf_sdio *bus;
3735         struct brcmf_bus_dcmd *dlst;
3736         u32 dngl_txglom;
3737         u32 dngl_txglomalign;
3738         u8 idx;
3739
3740         brcmf_dbg(TRACE, "Enter\n");
3741
3742         /* We make an assumption about address window mappings:
3743          * regsva == SI_ENUM_BASE*/
3744
3745         /* Allocate private bus interface state */
3746         bus = kzalloc(sizeof(struct brcmf_sdio), GFP_ATOMIC);
3747         if (!bus)
3748                 goto fail;
3749
3750         bus->sdiodev = sdiodev;
3751         sdiodev->bus = bus;
3752         skb_queue_head_init(&bus->glom);
3753         bus->txbound = BRCMF_TXBOUND;
3754         bus->rxbound = BRCMF_RXBOUND;
3755         bus->txminmax = BRCMF_TXMINMAX;
3756         bus->tx_seq = SDPCM_SEQUENCE_WRAP - 1;
3757
3758         INIT_WORK(&bus->datawork, brcmf_sdio_dataworker);
3759         bus->brcmf_wq = create_singlethread_workqueue("brcmf_wq");
3760         if (bus->brcmf_wq == NULL) {
3761                 brcmf_err("insufficient memory to create txworkqueue\n");
3762                 goto fail;
3763         }
3764
3765         /* attempt to attach to the dongle */
3766         if (!(brcmf_sdbrcm_probe_attach(bus, regsva))) {
3767                 brcmf_err("brcmf_sdbrcm_probe_attach failed\n");
3768                 goto fail;
3769         }
3770
3771         spin_lock_init(&bus->rxctl_lock);
3772         spin_lock_init(&bus->txqlock);
3773         init_waitqueue_head(&bus->ctrl_wait);
3774         init_waitqueue_head(&bus->dcmd_resp_wait);
3775
3776         /* Set up the watchdog timer */
3777         init_timer(&bus->timer);
3778         bus->timer.data = (unsigned long)bus;
3779         bus->timer.function = brcmf_sdbrcm_watchdog;
3780
3781         /* Initialize watchdog thread */
3782         init_completion(&bus->watchdog_wait);
3783         bus->watchdog_tsk = kthread_run(brcmf_sdbrcm_watchdog_thread,
3784                                         bus, "brcmf_watchdog");
3785         if (IS_ERR(bus->watchdog_tsk)) {
3786                 pr_warn("brcmf_watchdog thread failed to start\n");
3787                 bus->watchdog_tsk = NULL;
3788         }
3789         /* Initialize DPC thread */
3790         atomic_set(&bus->dpc_tskcnt, 0);
3791
3792         /* Assign bus interface call back */
3793         bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
3794         bus->sdiodev->bus_if->ops = &brcmf_sdio_bus_ops;
3795         bus->sdiodev->bus_if->chip = bus->ci->chip;
3796         bus->sdiodev->bus_if->chiprev = bus->ci->chiprev;
3797
3798         /* Attach to the brcmf/OS/network interface */
3799         ret = brcmf_attach(SDPCM_RESERVE, bus->sdiodev->dev);
3800         if (ret != 0) {
3801                 brcmf_err("brcmf_attach failed\n");
3802                 goto fail;
3803         }
3804
3805         /* Allocate buffers */
3806         if (!(brcmf_sdbrcm_probe_malloc(bus))) {
3807                 brcmf_err("brcmf_sdbrcm_probe_malloc failed\n");
3808                 goto fail;
3809         }
3810
3811         if (!(brcmf_sdbrcm_probe_init(bus))) {
3812                 brcmf_err("brcmf_sdbrcm_probe_init failed\n");
3813                 goto fail;
3814         }
3815
3816         brcmf_sdio_debugfs_create(bus);
3817         brcmf_dbg(INFO, "completed!!\n");
3818
3819         /* sdio bus core specific dcmd */
3820         idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
3821         dlst = kzalloc(sizeof(struct brcmf_bus_dcmd), GFP_KERNEL);
3822         if (dlst) {
3823                 if (bus->ci->c_inf[idx].rev < 12) {
3824                         /* for sdio core rev < 12, disable txgloming */
3825                         dngl_txglom = 0;
3826                         dlst->name = "bus:txglom";
3827                         dlst->param = (char *)&dngl_txglom;
3828                         dlst->param_len = sizeof(u32);
3829                 } else {
3830                         /* otherwise, set txglomalign */
3831                         dngl_txglomalign = bus->sdiodev->bus_if->align;
3832                         dlst->name = "bus:txglomalign";
3833                         dlst->param = (char *)&dngl_txglomalign;
3834                         dlst->param_len = sizeof(u32);
3835                 }
3836                 list_add(&dlst->list, &bus->sdiodev->bus_if->dcmd_list);
3837         }
3838
3839         /* if firmware path present try to download and bring up bus */
3840         ret = brcmf_bus_start(bus->sdiodev->dev);
3841         if (ret != 0) {
3842                 brcmf_err("dongle is not responding\n");
3843                 goto fail;
3844         }
3845
3846         return bus;
3847
3848 fail:
3849         brcmf_sdbrcm_release(bus);
3850         return NULL;
3851 }
3852
3853 void brcmf_sdbrcm_disconnect(void *ptr)
3854 {
3855         struct brcmf_sdio *bus = (struct brcmf_sdio *)ptr;
3856
3857         brcmf_dbg(TRACE, "Enter\n");
3858
3859         if (bus)
3860                 brcmf_sdbrcm_release(bus);
3861
3862         brcmf_dbg(TRACE, "Disconnected\n");
3863 }
3864
3865 void
3866 brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick)
3867 {
3868         /* Totally stop the timer */
3869         if (!wdtick && bus->wd_timer_valid) {
3870                 del_timer_sync(&bus->timer);
3871                 bus->wd_timer_valid = false;
3872                 bus->save_ms = wdtick;
3873                 return;
3874         }
3875
3876         /* don't start the wd until fw is loaded */
3877         if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN)
3878                 return;
3879
3880         if (wdtick) {
3881                 if (bus->save_ms != BRCMF_WD_POLL_MS) {
3882                         if (bus->wd_timer_valid)
3883                                 /* Stop timer and restart at new value */
3884                                 del_timer_sync(&bus->timer);
3885
3886                         /* Create timer again when watchdog period is
3887                            dynamically changed or in the first instance
3888                          */
3889                         bus->timer.expires =
3890                                 jiffies + BRCMF_WD_POLL_MS * HZ / 1000;
3891                         add_timer(&bus->timer);
3892
3893                 } else {
3894                         /* Re arm the timer, at last watchdog period */
3895                         mod_timer(&bus->timer,
3896                                 jiffies + BRCMF_WD_POLL_MS * HZ / 1000);
3897                 }
3898
3899                 bus->wd_timer_valid = true;
3900                 bus->save_ms = wdtick;
3901         }
3902 }