upload tizen1.0 source
[kernel/linux-2.6.36.git] / drivers / net / wireless / ath / ath5k / ath5k.h
1 /*
2  * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
3  * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
4  *
5  * Permission to use, copy, modify, and distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17
18 #ifndef _ATH5K_H
19 #define _ATH5K_H
20
21 /* TODO: Clean up channel debuging -doesn't work anyway- and start
22  * working on reg. control code using all available eeprom information
23  * -rev. engineering needed- */
24 #define CHAN_DEBUG      0
25
26 #include <linux/io.h>
27 #include <linux/types.h>
28 #include <net/mac80211.h>
29
30 /* RX/TX descriptor hw structs
31  * TODO: Driver part should only see sw structs */
32 #include "desc.h"
33
34 /* EEPROM structs/offsets
35  * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
36  * and clean up common bits, then introduce set/get functions in eeprom.c */
37 #include "eeprom.h"
38 #include "../ath.h"
39
40 /* PCI IDs */
41 #define PCI_DEVICE_ID_ATHEROS_AR5210            0x0007 /* AR5210 */
42 #define PCI_DEVICE_ID_ATHEROS_AR5311            0x0011 /* AR5311 */
43 #define PCI_DEVICE_ID_ATHEROS_AR5211            0x0012 /* AR5211 */
44 #define PCI_DEVICE_ID_ATHEROS_AR5212            0x0013 /* AR5212 */
45 #define PCI_DEVICE_ID_3COM_3CRDAG675            0x0013 /* 3CRDAG675 (Atheros AR5212) */
46 #define PCI_DEVICE_ID_3COM_2_3CRPAG175          0x0013 /* 3CRPAG175 (Atheros AR5212) */
47 #define PCI_DEVICE_ID_ATHEROS_AR5210_AP         0x0207 /* AR5210 (Early) */
48 #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM        0x1014 /* AR5212 (IBM MiniPCI) */
49 #define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT    0x1107 /* AR5210 (no eeprom) */
50 #define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT    0x1113 /* AR5212 (no eeprom) */
51 #define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT    0x1112 /* AR5211 (no eeprom) */
52 #define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA       0xf013 /* AR5212 (emulation board) */
53 #define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY     0xff12 /* AR5211 (emulation board) */
54 #define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B    0xf11b /* AR5211 (emulation board) */
55 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV2       0x0052 /* AR5312 WMAC (AP31) */
56 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV7       0x0057 /* AR5312 WMAC (AP30-040) */
57 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV8       0x0058 /* AR5312 WMAC (AP43-030) */
58 #define PCI_DEVICE_ID_ATHEROS_AR5212_0014       0x0014 /* AR5212 compatible */
59 #define PCI_DEVICE_ID_ATHEROS_AR5212_0015       0x0015 /* AR5212 compatible */
60 #define PCI_DEVICE_ID_ATHEROS_AR5212_0016       0x0016 /* AR5212 compatible */
61 #define PCI_DEVICE_ID_ATHEROS_AR5212_0017       0x0017 /* AR5212 compatible */
62 #define PCI_DEVICE_ID_ATHEROS_AR5212_0018       0x0018 /* AR5212 compatible */
63 #define PCI_DEVICE_ID_ATHEROS_AR5212_0019       0x0019 /* AR5212 compatible */
64 #define PCI_DEVICE_ID_ATHEROS_AR2413            0x001a /* AR2413 (Griffin-lite) */
65 #define PCI_DEVICE_ID_ATHEROS_AR5413            0x001b /* AR5413 (Eagle) */
66 #define PCI_DEVICE_ID_ATHEROS_AR5424            0x001c /* AR5424 (Condor PCI-E) */
67 #define PCI_DEVICE_ID_ATHEROS_AR5416            0x0023 /* AR5416 */
68 #define PCI_DEVICE_ID_ATHEROS_AR5418            0x0024 /* AR5418 */
69
70 /****************************\
71   GENERIC DRIVER DEFINITIONS
72 \****************************/
73
74 #define ATH5K_PRINTF(fmt, ...)   printk("%s: " fmt, __func__, ##__VA_ARGS__)
75
76 #define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
77         printk(_level "ath5k %s: " _fmt, \
78                 ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
79                 ##__VA_ARGS__)
80
81 #define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
82         if (net_ratelimit()) \
83                 ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
84         } while (0)
85
86 #define ATH5K_INFO(_sc, _fmt, ...) \
87         ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
88
89 #define ATH5K_WARN(_sc, _fmt, ...) \
90         ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
91
92 #define ATH5K_ERR(_sc, _fmt, ...) \
93         ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
94
95 /*
96  * AR5K REGISTER ACCESS
97  */
98
99 /* Some macros to read/write fields */
100
101 /* First shift, then mask */
102 #define AR5K_REG_SM(_val, _flags)                                       \
103         (((_val) << _flags##_S) & (_flags))
104
105 /* First mask, then shift */
106 #define AR5K_REG_MS(_val, _flags)                                       \
107         (((_val) & (_flags)) >> _flags##_S)
108
109 /* Some registers can hold multiple values of interest. For this
110  * reason when we want to write to these registers we must first
111  * retrieve the values which we do not want to clear (lets call this
112  * old_data) and then set the register with this and our new_value:
113  * ( old_data | new_value) */
114 #define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val)                     \
115         ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
116             (((_val) << _flags##_S) & (_flags)), _reg)
117
118 #define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask)                   \
119         ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) &           \
120                         (_mask)) | (_flags), _reg)
121
122 #define AR5K_REG_ENABLE_BITS(ah, _reg, _flags)                          \
123         ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
124
125 #define AR5K_REG_DISABLE_BITS(ah, _reg, _flags)                 \
126         ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
127
128 /* Access to PHY registers */
129 #define AR5K_PHY_READ(ah, _reg)                                 \
130         ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
131
132 #define AR5K_PHY_WRITE(ah, _reg, _val)                                  \
133         ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
134
135 /* Access QCU registers per queue */
136 #define AR5K_REG_READ_Q(ah, _reg, _queue)                               \
137         (ath5k_hw_reg_read(ah, _reg) & (1 << _queue))                   \
138
139 #define AR5K_REG_WRITE_Q(ah, _reg, _queue)                              \
140         ath5k_hw_reg_write(ah, (1 << _queue), _reg)
141
142 #define AR5K_Q_ENABLE_BITS(_reg, _queue) do {                           \
143         _reg |= 1 << _queue;                                            \
144 } while (0)
145
146 #define AR5K_Q_DISABLE_BITS(_reg, _queue) do {                          \
147         _reg &= ~(1 << _queue);                                         \
148 } while (0)
149
150 /* Used while writing initvals */
151 #define AR5K_REG_WAIT(_i) do {                                          \
152         if (_i % 64)                                                    \
153                 udelay(1);                                              \
154 } while (0)
155
156 /* Register dumps are done per operation mode */
157 #define AR5K_INI_RFGAIN_5GHZ            0
158 #define AR5K_INI_RFGAIN_2GHZ            1
159
160 /* TODO: Clean this up */
161 #define AR5K_INI_VAL_11A                0
162 #define AR5K_INI_VAL_11A_TURBO          1
163 #define AR5K_INI_VAL_11B                2
164 #define AR5K_INI_VAL_11G                3
165 #define AR5K_INI_VAL_11G_TURBO          4
166 #define AR5K_INI_VAL_XR                 0
167 #define AR5K_INI_VAL_MAX                5
168
169 /*
170  * Some tuneable values (these should be changeable by the user)
171  * TODO: Make use of them and add more options OR use debug/configfs
172  */
173 #define AR5K_TUNE_DMA_BEACON_RESP               2
174 #define AR5K_TUNE_SW_BEACON_RESP                10
175 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF       0
176 #define AR5K_TUNE_RADAR_ALERT                   false
177 #define AR5K_TUNE_MIN_TX_FIFO_THRES             1
178 #define AR5K_TUNE_MAX_TX_FIFO_THRES             ((IEEE80211_MAX_LEN / 64) + 1)
179 #define AR5K_TUNE_REGISTER_TIMEOUT              20000
180 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to
181  * be the max value. */
182 #define AR5K_TUNE_RSSI_THRES                    129
183 /* This must be set when setting the RSSI threshold otherwise it can
184  * prevent a reset. If AR5K_RSSI_THR is read after writing to it
185  * the BMISS_THRES will be seen as 0, seems harware doesn't keep
186  * track of it. Max value depends on harware. For AR5210 this is just 7.
187  * For AR5211+ this seems to be up to 255. */
188 #define AR5K_TUNE_BMISS_THRES                   7
189 #define AR5K_TUNE_REGISTER_DWELL_TIME           20000
190 #define AR5K_TUNE_BEACON_INTERVAL               100
191 #define AR5K_TUNE_AIFS                          2
192 #define AR5K_TUNE_AIFS_11B                      2
193 #define AR5K_TUNE_AIFS_XR                       0
194 #define AR5K_TUNE_CWMIN                         15
195 #define AR5K_TUNE_CWMIN_11B                     31
196 #define AR5K_TUNE_CWMIN_XR                      3
197 #define AR5K_TUNE_CWMAX                         1023
198 #define AR5K_TUNE_CWMAX_11B                     1023
199 #define AR5K_TUNE_CWMAX_XR                      7
200 #define AR5K_TUNE_NOISE_FLOOR                   -72
201 #define AR5K_TUNE_CCA_MAX_GOOD_VALUE            -95
202 #define AR5K_TUNE_MAX_TXPOWER                   63
203 #define AR5K_TUNE_DEFAULT_TXPOWER               25
204 #define AR5K_TUNE_TPC_TXPOWER                   false
205 #define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL    10000   /* 10 sec */
206 #define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI     1000    /* 1 sec */
207 #define ATH5K_TUNE_CALIBRATION_INTERVAL_NF      60000   /* 60 sec */
208
209 #define AR5K_INIT_CARR_SENSE_EN                 1
210
211 /*Swap RX/TX Descriptor for big endian archs*/
212 #if defined(__BIG_ENDIAN)
213 #define AR5K_INIT_CFG   (               \
214         AR5K_CFG_SWTD | AR5K_CFG_SWRD   \
215 )
216 #else
217 #define AR5K_INIT_CFG   0x00000000
218 #endif
219
220 /* Initial values */
221 #define AR5K_INIT_CYCRSSI_THR1                  2
222 #define AR5K_INIT_TX_LATENCY                    502
223 #define AR5K_INIT_USEC                          39
224 #define AR5K_INIT_USEC_TURBO                    79
225 #define AR5K_INIT_USEC_32                       31
226 #define AR5K_INIT_SLOT_TIME                     396
227 #define AR5K_INIT_SLOT_TIME_TURBO               480
228 #define AR5K_INIT_ACK_CTS_TIMEOUT               1024
229 #define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO         0x08000800
230 #define AR5K_INIT_PROG_IFS                      920
231 #define AR5K_INIT_PROG_IFS_TURBO                960
232 #define AR5K_INIT_EIFS                          3440
233 #define AR5K_INIT_EIFS_TURBO                    6880
234 #define AR5K_INIT_SIFS                          560
235 #define AR5K_INIT_SIFS_TURBO                    480
236 #define AR5K_INIT_SH_RETRY                      10
237 #define AR5K_INIT_LG_RETRY                      AR5K_INIT_SH_RETRY
238 #define AR5K_INIT_SSH_RETRY                     32
239 #define AR5K_INIT_SLG_RETRY                     AR5K_INIT_SSH_RETRY
240 #define AR5K_INIT_TX_RETRY                      10
241
242 #define AR5K_INIT_TRANSMIT_LATENCY              (                       \
243         (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |       \
244         (AR5K_INIT_USEC)                                                \
245 )
246 #define AR5K_INIT_TRANSMIT_LATENCY_TURBO        (                       \
247         (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |       \
248         (AR5K_INIT_USEC_TURBO)                                          \
249 )
250 #define AR5K_INIT_PROTO_TIME_CNTRL              (                       \
251         (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) |      \
252         (AR5K_INIT_PROG_IFS)                                            \
253 )
254 #define AR5K_INIT_PROTO_TIME_CNTRL_TURBO        (                       \
255         (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
256         (AR5K_INIT_PROG_IFS_TURBO)                                      \
257 )
258
259 /* token to use for aifs, cwmin, cwmax in MadWiFi */
260 #define AR5K_TXQ_USEDEFAULT     ((u32) -1)
261
262 /* GENERIC CHIPSET DEFINITIONS */
263
264 /* MAC Chips */
265 enum ath5k_version {
266         AR5K_AR5210     = 0,
267         AR5K_AR5211     = 1,
268         AR5K_AR5212     = 2,
269 };
270
271 /* PHY Chips */
272 enum ath5k_radio {
273         AR5K_RF5110     = 0,
274         AR5K_RF5111     = 1,
275         AR5K_RF5112     = 2,
276         AR5K_RF2413     = 3,
277         AR5K_RF5413     = 4,
278         AR5K_RF2316     = 5,
279         AR5K_RF2317     = 6,
280         AR5K_RF2425     = 7,
281 };
282
283 /*
284  * Common silicon revision/version values
285  */
286
287 enum ath5k_srev_type {
288         AR5K_VERSION_MAC,
289         AR5K_VERSION_RAD,
290 };
291
292 struct ath5k_srev_name {
293         const char              *sr_name;
294         enum ath5k_srev_type    sr_type;
295         u_int                   sr_val;
296 };
297
298 #define AR5K_SREV_UNKNOWN       0xffff
299
300 #define AR5K_SREV_AR5210        0x00 /* Crete */
301 #define AR5K_SREV_AR5311        0x10 /* Maui 1 */
302 #define AR5K_SREV_AR5311A       0x20 /* Maui 2 */
303 #define AR5K_SREV_AR5311B       0x30 /* Spirit */
304 #define AR5K_SREV_AR5211        0x40 /* Oahu */
305 #define AR5K_SREV_AR5212        0x50 /* Venice */
306 #define AR5K_SREV_AR5212_V4     0x54 /* ??? */
307 #define AR5K_SREV_AR5213        0x55 /* ??? */
308 #define AR5K_SREV_AR5213A       0x59 /* Hainan */
309 #define AR5K_SREV_AR2413        0x78 /* Griffin lite */
310 #define AR5K_SREV_AR2414        0x70 /* Griffin */
311 #define AR5K_SREV_AR5424        0x90 /* Condor */
312 #define AR5K_SREV_AR5413        0xa4 /* Eagle lite */
313 #define AR5K_SREV_AR5414        0xa0 /* Eagle */
314 #define AR5K_SREV_AR2415        0xb0 /* Talon */
315 #define AR5K_SREV_AR5416        0xc0 /* PCI-E */
316 #define AR5K_SREV_AR5418        0xca /* PCI-E */
317 #define AR5K_SREV_AR2425        0xe0 /* Swan */
318 #define AR5K_SREV_AR2417        0xf0 /* Nala */
319
320 #define AR5K_SREV_RAD_5110      0x00
321 #define AR5K_SREV_RAD_5111      0x10
322 #define AR5K_SREV_RAD_5111A     0x15
323 #define AR5K_SREV_RAD_2111      0x20
324 #define AR5K_SREV_RAD_5112      0x30
325 #define AR5K_SREV_RAD_5112A     0x35
326 #define AR5K_SREV_RAD_5112B     0x36
327 #define AR5K_SREV_RAD_2112      0x40
328 #define AR5K_SREV_RAD_2112A     0x45
329 #define AR5K_SREV_RAD_2112B     0x46
330 #define AR5K_SREV_RAD_2413      0x50
331 #define AR5K_SREV_RAD_5413      0x60
332 #define AR5K_SREV_RAD_2316      0x70 /* Cobra SoC */
333 #define AR5K_SREV_RAD_2317      0x80
334 #define AR5K_SREV_RAD_5424      0xa0 /* Mostly same as 5413 */
335 #define AR5K_SREV_RAD_2425      0xa2
336 #define AR5K_SREV_RAD_5133      0xc0
337
338 #define AR5K_SREV_PHY_5211      0x30
339 #define AR5K_SREV_PHY_5212      0x41
340 #define AR5K_SREV_PHY_5212A     0x42
341 #define AR5K_SREV_PHY_5212B     0x43
342 #define AR5K_SREV_PHY_2413      0x45
343 #define AR5K_SREV_PHY_5413      0x61
344 #define AR5K_SREV_PHY_2425      0x70
345
346 /* IEEE defs */
347 #define IEEE80211_MAX_LEN       2500
348
349 /* TODO add support to mac80211 for vendor-specific rates and modes */
350
351 /*
352  * Some of this information is based on Documentation from:
353  *
354  * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
355  *
356  * Modulation for Atheros' eXtended Range - range enhancing extension that is
357  * supposed to double the distance an Atheros client device can keep a
358  * connection with an Atheros access point. This is achieved by increasing
359  * the receiver sensitivity up to, -105dBm, which is about 20dB above what
360  * the 802.11 specifications demand. In addition, new (proprietary) data rates
361  * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
362  *
363  * Please note that can you either use XR or TURBO but you cannot use both,
364  * they are exclusive.
365  *
366  */
367 #define MODULATION_XR           0x00000200
368 /*
369  * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
370  * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
371  * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
372  * channels. To use this feature your Access Point must also suport it.
373  * There is also a distinction between "static" and "dynamic" turbo modes:
374  *
375  * - Static: is the dumb version: devices set to this mode stick to it until
376  *     the mode is turned off.
377  * - Dynamic: is the intelligent version, the network decides itself if it
378  *     is ok to use turbo. As soon as traffic is detected on adjacent channels
379  *     (which would get used in turbo mode), or when a non-turbo station joins
380  *     the network, turbo mode won't be used until the situation changes again.
381  *     Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
382  *     monitors the used radio band in order to decide whether turbo mode may
383  *     be used or not.
384  *
385  * This article claims Super G sticks to bonding of channels 5 and 6 for
386  * USA:
387  *
388  * http://www.pcworld.com/article/id,113428-page,1/article.html
389  *
390  * The channel bonding seems to be driver specific though. In addition to
391  * deciding what channels will be used, these "Turbo" modes are accomplished
392  * by also enabling the following features:
393  *
394  * - Bursting: allows multiple frames to be sent at once, rather than pausing
395  *     after each frame. Bursting is a standards-compliant feature that can be
396  *     used with any Access Point.
397  * - Fast frames: increases the amount of information that can be sent per
398  *     frame, also resulting in a reduction of transmission overhead. It is a
399  *     proprietary feature that needs to be supported by the Access Point.
400  * - Compression: data frames are compressed in real time using a Lempel Ziv
401  *     algorithm. This is done transparently. Once this feature is enabled,
402  *     compression and decompression takes place inside the chipset, without
403  *     putting additional load on the host CPU.
404  *
405  */
406 #define MODULATION_TURBO        0x00000080
407
408 enum ath5k_driver_mode {
409         AR5K_MODE_11A           =       0,
410         AR5K_MODE_11A_TURBO     =       1,
411         AR5K_MODE_11B           =       2,
412         AR5K_MODE_11G           =       3,
413         AR5K_MODE_11G_TURBO     =       4,
414         AR5K_MODE_XR            =       0,
415         AR5K_MODE_MAX           =       5
416 };
417
418 enum ath5k_ant_mode {
419         AR5K_ANTMODE_DEFAULT    = 0,    /* default antenna setup */
420         AR5K_ANTMODE_FIXED_A    = 1,    /* only antenna A is present */
421         AR5K_ANTMODE_FIXED_B    = 2,    /* only antenna B is present */
422         AR5K_ANTMODE_SINGLE_AP  = 3,    /* sta locked on a single ap */
423         AR5K_ANTMODE_SECTOR_AP  = 4,    /* AP with tx antenna set on tx desc */
424         AR5K_ANTMODE_SECTOR_STA = 5,    /* STA with tx antenna set on tx desc */
425         AR5K_ANTMODE_DEBUG      = 6,    /* Debug mode -A -> Rx, B-> Tx- */
426         AR5K_ANTMODE_MAX,
427 };
428
429
430 /****************\
431   TX DEFINITIONS
432 \****************/
433
434 /*
435  * TX Status descriptor
436  */
437 struct ath5k_tx_status {
438         u16     ts_seqnum;
439         u16     ts_tstamp;
440         u8      ts_status;
441         u8      ts_rate[4];
442         u8      ts_retry[4];
443         u8      ts_final_idx;
444         s8      ts_rssi;
445         u8      ts_shortretry;
446         u8      ts_longretry;
447         u8      ts_virtcol;
448         u8      ts_antenna;
449 };
450
451 #define AR5K_TXSTAT_ALTRATE     0x80
452 #define AR5K_TXERR_XRETRY       0x01
453 #define AR5K_TXERR_FILT         0x02
454 #define AR5K_TXERR_FIFO         0x04
455
456 /**
457  * enum ath5k_tx_queue - Queue types used to classify tx queues.
458  * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
459  * @AR5K_TX_QUEUE_DATA: A normal data queue
460  * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
461  * @AR5K_TX_QUEUE_BEACON: The beacon queue
462  * @AR5K_TX_QUEUE_CAB: The after-beacon queue
463  * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
464  */
465 enum ath5k_tx_queue {
466         AR5K_TX_QUEUE_INACTIVE = 0,
467         AR5K_TX_QUEUE_DATA,
468         AR5K_TX_QUEUE_XR_DATA,
469         AR5K_TX_QUEUE_BEACON,
470         AR5K_TX_QUEUE_CAB,
471         AR5K_TX_QUEUE_UAPSD,
472 };
473
474 #define AR5K_NUM_TX_QUEUES              10
475 #define AR5K_NUM_TX_QUEUES_NOQCU        2
476
477 /*
478  * Queue syb-types to classify normal data queues.
479  * These are the 4 Access Categories as defined in
480  * WME spec. 0 is the lowest priority and 4 is the
481  * highest. Normal data that hasn't been classified
482  * goes to the Best Effort AC.
483  */
484 enum ath5k_tx_queue_subtype {
485         AR5K_WME_AC_BK = 0,     /*Background traffic*/
486         AR5K_WME_AC_BE,         /*Best-effort (normal) traffic)*/
487         AR5K_WME_AC_VI,         /*Video traffic*/
488         AR5K_WME_AC_VO,         /*Voice traffic*/
489 };
490
491 /*
492  * Queue ID numbers as returned by the hw functions, each number
493  * represents a hw queue. If hw does not support hw queues
494  * (eg 5210) all data goes in one queue. These match
495  * d80211 definitions (net80211/MadWiFi don't use them).
496  */
497 enum ath5k_tx_queue_id {
498         AR5K_TX_QUEUE_ID_NOQCU_DATA     = 0,
499         AR5K_TX_QUEUE_ID_NOQCU_BEACON   = 1,
500         AR5K_TX_QUEUE_ID_DATA_MIN       = 0, /*IEEE80211_TX_QUEUE_DATA0*/
501         AR5K_TX_QUEUE_ID_DATA_MAX       = 4, /*IEEE80211_TX_QUEUE_DATA4*/
502         AR5K_TX_QUEUE_ID_DATA_SVP       = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
503         AR5K_TX_QUEUE_ID_CAB            = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
504         AR5K_TX_QUEUE_ID_BEACON         = 7, /*IEEE80211_TX_QUEUE_BEACON*/
505         AR5K_TX_QUEUE_ID_UAPSD          = 8,
506         AR5K_TX_QUEUE_ID_XR_DATA        = 9,
507 };
508
509 /*
510  * Flags to set hw queue's parameters...
511  */
512 #define AR5K_TXQ_FLAG_TXOKINT_ENABLE            0x0001  /* Enable TXOK interrupt */
513 #define AR5K_TXQ_FLAG_TXERRINT_ENABLE           0x0002  /* Enable TXERR interrupt */
514 #define AR5K_TXQ_FLAG_TXEOLINT_ENABLE           0x0004  /* Enable TXEOL interrupt -not used- */
515 #define AR5K_TXQ_FLAG_TXDESCINT_ENABLE          0x0008  /* Enable TXDESC interrupt -not used- */
516 #define AR5K_TXQ_FLAG_TXURNINT_ENABLE           0x0010  /* Enable TXURN interrupt */
517 #define AR5K_TXQ_FLAG_CBRORNINT_ENABLE          0x0020  /* Enable CBRORN interrupt */
518 #define AR5K_TXQ_FLAG_CBRURNINT_ENABLE          0x0040  /* Enable CBRURN interrupt */
519 #define AR5K_TXQ_FLAG_QTRIGINT_ENABLE           0x0080  /* Enable QTRIG interrupt */
520 #define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE         0x0100  /* Enable TXNOFRM interrupt */
521 #define AR5K_TXQ_FLAG_BACKOFF_DISABLE           0x0200  /* Disable random post-backoff */
522 #define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300  /* Enable ready time expiry policy (?)*/
523 #define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800  /* Enable backoff while bursting */
524 #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS         0x1000  /* Disable backoff while bursting */
525 #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE        0x2000  /* Enable hw compression -not implemented-*/
526
527 /*
528  * A struct to hold tx queue's parameters
529  */
530 struct ath5k_txq_info {
531         enum ath5k_tx_queue tqi_type;
532         enum ath5k_tx_queue_subtype tqi_subtype;
533         u16     tqi_flags;      /* Tx queue flags (see above) */
534         u32     tqi_aifs;       /* Arbitrated Interframe Space */
535         s32     tqi_cw_min;     /* Minimum Contention Window */
536         s32     tqi_cw_max;     /* Maximum Contention Window */
537         u32     tqi_cbr_period; /* Constant bit rate period */
538         u32     tqi_cbr_overflow_limit;
539         u32     tqi_burst_time;
540         u32     tqi_ready_time; /* Time queue waits after an event */
541 };
542
543 /*
544  * Transmit packet types.
545  * used on tx control descriptor
546  */
547 enum ath5k_pkt_type {
548         AR5K_PKT_TYPE_NORMAL            = 0,
549         AR5K_PKT_TYPE_ATIM              = 1,
550         AR5K_PKT_TYPE_PSPOLL            = 2,
551         AR5K_PKT_TYPE_BEACON            = 3,
552         AR5K_PKT_TYPE_PROBE_RESP        = 4,
553         AR5K_PKT_TYPE_PIFS              = 5,
554 };
555
556 /*
557  * TX power and TPC settings
558  */
559 #define AR5K_TXPOWER_OFDM(_r, _v)       (                       \
560         ((0 & 1) << ((_v) + 6)) |                               \
561         (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \
562 )
563
564 #define AR5K_TXPOWER_CCK(_r, _v)        (                       \
565         (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v)     \
566 )
567
568 /*
569  * DMA size definitions (2^(n+2))
570  */
571 enum ath5k_dmasize {
572         AR5K_DMASIZE_4B = 0,
573         AR5K_DMASIZE_8B,
574         AR5K_DMASIZE_16B,
575         AR5K_DMASIZE_32B,
576         AR5K_DMASIZE_64B,
577         AR5K_DMASIZE_128B,
578         AR5K_DMASIZE_256B,
579         AR5K_DMASIZE_512B
580 };
581
582
583 /****************\
584   RX DEFINITIONS
585 \****************/
586
587 /*
588  * RX Status descriptor
589  */
590 struct ath5k_rx_status {
591         u16     rs_datalen;
592         u16     rs_tstamp;
593         u8      rs_status;
594         u8      rs_phyerr;
595         s8      rs_rssi;
596         u8      rs_keyix;
597         u8      rs_rate;
598         u8      rs_antenna;
599         u8      rs_more;
600 };
601
602 #define AR5K_RXERR_CRC          0x01
603 #define AR5K_RXERR_PHY          0x02
604 #define AR5K_RXERR_FIFO         0x04
605 #define AR5K_RXERR_DECRYPT      0x08
606 #define AR5K_RXERR_MIC          0x10
607 #define AR5K_RXKEYIX_INVALID    ((u8) - 1)
608 #define AR5K_TXKEYIX_INVALID    ((u32) - 1)
609
610
611 /**************************\
612  BEACON TIMERS DEFINITIONS
613 \**************************/
614
615 #define AR5K_BEACON_PERIOD      0x0000ffff
616 #define AR5K_BEACON_ENA         0x00800000 /*enable beacon xmit*/
617 #define AR5K_BEACON_RESET_TSF   0x01000000 /*force a TSF reset*/
618
619
620 /*
621  * TSF to TU conversion:
622  *
623  * TSF is a 64bit value in usec (microseconds).
624  * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
625  * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
626  */
627 #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
628
629
630 /*******************************\
631   GAIN OPTIMIZATION DEFINITIONS
632 \*******************************/
633
634 enum ath5k_rfgain {
635         AR5K_RFGAIN_INACTIVE = 0,
636         AR5K_RFGAIN_ACTIVE,
637         AR5K_RFGAIN_READ_REQUESTED,
638         AR5K_RFGAIN_NEED_CHANGE,
639 };
640
641 struct ath5k_gain {
642         u8                      g_step_idx;
643         u8                      g_current;
644         u8                      g_target;
645         u8                      g_low;
646         u8                      g_high;
647         u8                      g_f_corr;
648         u8                      g_state;
649 };
650
651 /********************\
652   COMMON DEFINITIONS
653 \********************/
654
655 #define AR5K_SLOT_TIME_9        396
656 #define AR5K_SLOT_TIME_20       880
657 #define AR5K_SLOT_TIME_MAX      0xffff
658
659 /* channel_flags */
660 #define CHANNEL_CW_INT  0x0008  /* Contention Window interference detected */
661 #define CHANNEL_TURBO   0x0010  /* Turbo Channel */
662 #define CHANNEL_CCK     0x0020  /* CCK channel */
663 #define CHANNEL_OFDM    0x0040  /* OFDM channel */
664 #define CHANNEL_2GHZ    0x0080  /* 2GHz channel. */
665 #define CHANNEL_5GHZ    0x0100  /* 5GHz channel */
666 #define CHANNEL_PASSIVE 0x0200  /* Only passive scan allowed */
667 #define CHANNEL_DYN     0x0400  /* Dynamic CCK-OFDM channel (for g operation) */
668 #define CHANNEL_XR      0x0800  /* XR channel */
669
670 #define CHANNEL_A       (CHANNEL_5GHZ|CHANNEL_OFDM)
671 #define CHANNEL_B       (CHANNEL_2GHZ|CHANNEL_CCK)
672 #define CHANNEL_G       (CHANNEL_2GHZ|CHANNEL_OFDM)
673 #define CHANNEL_T       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
674 #define CHANNEL_TG      (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
675 #define CHANNEL_108A    CHANNEL_T
676 #define CHANNEL_108G    CHANNEL_TG
677 #define CHANNEL_X       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
678
679 #define CHANNEL_ALL     (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
680                 CHANNEL_TURBO)
681
682 #define CHANNEL_ALL_NOTURBO     (CHANNEL_ALL & ~CHANNEL_TURBO)
683 #define CHANNEL_MODES           CHANNEL_ALL
684
685 /*
686  * Used internaly for reset_tx_queue).
687  * Also see struct struct ieee80211_channel.
688  */
689 #define IS_CHAN_XR(_c)  ((_c->hw_value & CHANNEL_XR) != 0)
690 #define IS_CHAN_B(_c)   ((_c->hw_value & CHANNEL_B) != 0)
691
692 /*
693  * The following structure is used to map 2GHz channels to
694  * 5GHz Atheros channels.
695  * TODO: Clean up
696  */
697 struct ath5k_athchan_2ghz {
698         u32     a2_flags;
699         u16     a2_athchan;
700 };
701
702
703 /******************\
704   RATE DEFINITIONS
705 \******************/
706
707 /**
708  * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
709  *
710  * The rate code is used to get the RX rate or set the TX rate on the
711  * hardware descriptors. It is also used for internal modulation control
712  * and settings.
713  *
714  * This is the hardware rate map we are aware of:
715  *
716  * rate_code   0x01    0x02    0x03    0x04    0x05    0x06    0x07    0x08
717  * rate_kbps   3000    1000    ?       ?       ?       2000    500     48000
718  *
719  * rate_code   0x09    0x0A    0x0B    0x0C    0x0D    0x0E    0x0F    0x10
720  * rate_kbps   24000   12000   6000    54000   36000   18000   9000    ?
721  *
722  * rate_code   17      18      19      20      21      22      23      24
723  * rate_kbps   ?       ?       ?       ?       ?       ?       ?       11000
724  *
725  * rate_code   25      26      27      28      29      30      31      32
726  * rate_kbps   5500    2000    1000    11000S  5500S   2000S   ?       ?
727  *
728  * "S" indicates CCK rates with short preamble.
729  *
730  * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
731  * lowest 4 bits, so they are the same as below with a 0xF mask.
732  * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
733  * We handle this in ath5k_setup_bands().
734  */
735 #define AR5K_MAX_RATES 32
736
737 /* B */
738 #define ATH5K_RATE_CODE_1M      0x1B
739 #define ATH5K_RATE_CODE_2M      0x1A
740 #define ATH5K_RATE_CODE_5_5M    0x19
741 #define ATH5K_RATE_CODE_11M     0x18
742 /* A and G */
743 #define ATH5K_RATE_CODE_6M      0x0B
744 #define ATH5K_RATE_CODE_9M      0x0F
745 #define ATH5K_RATE_CODE_12M     0x0A
746 #define ATH5K_RATE_CODE_18M     0x0E
747 #define ATH5K_RATE_CODE_24M     0x09
748 #define ATH5K_RATE_CODE_36M     0x0D
749 #define ATH5K_RATE_CODE_48M     0x08
750 #define ATH5K_RATE_CODE_54M     0x0C
751 /* XR */
752 #define ATH5K_RATE_CODE_XR_500K 0x07
753 #define ATH5K_RATE_CODE_XR_1M   0x02
754 #define ATH5K_RATE_CODE_XR_2M   0x06
755 #define ATH5K_RATE_CODE_XR_3M   0x01
756
757 /* adding this flag to rate_code enables short preamble */
758 #define AR5K_SET_SHORT_PREAMBLE 0x04
759
760 /*
761  * Crypto definitions
762  */
763
764 #define AR5K_KEYCACHE_SIZE      8
765
766 /***********************\
767  HW RELATED DEFINITIONS
768 \***********************/
769
770 /*
771  * Misc definitions
772  */
773 #define AR5K_RSSI_EP_MULTIPLIER (1<<7)
774
775 #define AR5K_ASSERT_ENTRY(_e, _s) do {          \
776         if (_e >= _s)                           \
777                 return (false);                 \
778 } while (0)
779
780 /*
781  * Hardware interrupt abstraction
782  */
783
784 /**
785  * enum ath5k_int - Hardware interrupt masks helpers
786  *
787  * @AR5K_INT_RX: mask to identify received frame interrupts, of type
788  *      AR5K_ISR_RXOK or AR5K_ISR_RXERR
789  * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
790  * @AR5K_INT_RXNOFRM: No frame received (?)
791  * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
792  *      Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
793  *      LinkPtr is NULL. For more details, refer to:
794  *      http://www.freepatentsonline.com/20030225739.html
795  * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
796  *      Note that Rx overrun is not always fatal, on some chips we can continue
797  *      operation without reseting the card, that's why int_fatal is not
798  *      common for all chips.
799  * @AR5K_INT_TX: mask to identify received frame interrupts, of type
800  *      AR5K_ISR_TXOK or AR5K_ISR_TXERR
801  * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
802  * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
803  *      We currently do increments on interrupt by
804  *      (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
805  * @AR5K_INT_MIB: Indicates the either Management Information Base counters or
806  *      one of the PHY error counters reached the maximum value and should be
807  *      read and cleared.
808  * @AR5K_INT_RXPHY: RX PHY Error
809  * @AR5K_INT_RXKCM: RX Key cache miss
810  * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
811  *      beacon that must be handled in software. The alternative is if you
812  *      have VEOL support, in that case you let the hardware deal with things.
813  * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
814  *      beacons from the AP have associated with, we should probably try to
815  *      reassociate. When in IBSS mode this might mean we have not received
816  *      any beacons from any local stations. Note that every station in an
817  *      IBSS schedules to send beacons at the Target Beacon Transmission Time
818  *      (TBTT) with a random backoff.
819  * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
820  * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
821  *      until properly handled
822  * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
823  *      errors. These types of errors we can enable seem to be of type
824  *      AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
825  * @AR5K_INT_GLOBAL: Used to clear and set the IER
826  * @AR5K_INT_NOCARD: signals the card has been removed
827  * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
828  *      bit value
829  *
830  * These are mapped to take advantage of some common bits
831  * between the MACs, to be able to set intr properties
832  * easier. Some of them are not used yet inside hw.c. Most map
833  * to the respective hw interrupt value as they are common amogst different
834  * MACs.
835  */
836 enum ath5k_int {
837         AR5K_INT_RXOK   = 0x00000001,
838         AR5K_INT_RXDESC = 0x00000002,
839         AR5K_INT_RXERR  = 0x00000004,
840         AR5K_INT_RXNOFRM = 0x00000008,
841         AR5K_INT_RXEOL  = 0x00000010,
842         AR5K_INT_RXORN  = 0x00000020,
843         AR5K_INT_TXOK   = 0x00000040,
844         AR5K_INT_TXDESC = 0x00000080,
845         AR5K_INT_TXERR  = 0x00000100,
846         AR5K_INT_TXNOFRM = 0x00000200,
847         AR5K_INT_TXEOL  = 0x00000400,
848         AR5K_INT_TXURN  = 0x00000800,
849         AR5K_INT_MIB    = 0x00001000,
850         AR5K_INT_SWI    = 0x00002000,
851         AR5K_INT_RXPHY  = 0x00004000,
852         AR5K_INT_RXKCM  = 0x00008000,
853         AR5K_INT_SWBA   = 0x00010000,
854         AR5K_INT_BRSSI  = 0x00020000,
855         AR5K_INT_BMISS  = 0x00040000,
856         AR5K_INT_FATAL  = 0x00080000, /* Non common */
857         AR5K_INT_BNR    = 0x00100000, /* Non common */
858         AR5K_INT_TIM    = 0x00200000, /* Non common */
859         AR5K_INT_DTIM   = 0x00400000, /* Non common */
860         AR5K_INT_DTIM_SYNC =    0x00800000, /* Non common */
861         AR5K_INT_GPIO   =       0x01000000,
862         AR5K_INT_BCN_TIMEOUT =  0x02000000, /* Non common */
863         AR5K_INT_CAB_TIMEOUT =  0x04000000, /* Non common */
864         AR5K_INT_RX_DOPPLER =   0x08000000, /* Non common */
865         AR5K_INT_QCBRORN =      0x10000000, /* Non common */
866         AR5K_INT_QCBRURN =      0x20000000, /* Non common */
867         AR5K_INT_QTRIG  =       0x40000000, /* Non common */
868         AR5K_INT_GLOBAL =       0x80000000,
869
870         AR5K_INT_COMMON  = AR5K_INT_RXOK
871                 | AR5K_INT_RXDESC
872                 | AR5K_INT_RXERR
873                 | AR5K_INT_RXNOFRM
874                 | AR5K_INT_RXEOL
875                 | AR5K_INT_RXORN
876                 | AR5K_INT_TXOK
877                 | AR5K_INT_TXDESC
878                 | AR5K_INT_TXERR
879                 | AR5K_INT_TXNOFRM
880                 | AR5K_INT_TXEOL
881                 | AR5K_INT_TXURN
882                 | AR5K_INT_MIB
883                 | AR5K_INT_SWI
884                 | AR5K_INT_RXPHY
885                 | AR5K_INT_RXKCM
886                 | AR5K_INT_SWBA
887                 | AR5K_INT_BRSSI
888                 | AR5K_INT_BMISS
889                 | AR5K_INT_GPIO
890                 | AR5K_INT_GLOBAL,
891
892         AR5K_INT_NOCARD = 0xffffffff
893 };
894
895 /* mask which calibration is active at the moment */
896 enum ath5k_calibration_mask {
897         AR5K_CALIBRATION_FULL = 0x01,
898         AR5K_CALIBRATION_SHORT = 0x02,
899         AR5K_CALIBRATION_ANI = 0x04,
900 };
901
902 /*
903  * Power management
904  */
905 enum ath5k_power_mode {
906         AR5K_PM_UNDEFINED = 0,
907         AR5K_PM_AUTO,
908         AR5K_PM_AWAKE,
909         AR5K_PM_FULL_SLEEP,
910         AR5K_PM_NETWORK_SLEEP,
911 };
912
913 /*
914  * These match net80211 definitions (not used in
915  * mac80211).
916  * TODO: Clean this up
917  */
918 #define AR5K_LED_INIT   0 /*IEEE80211_S_INIT*/
919 #define AR5K_LED_SCAN   1 /*IEEE80211_S_SCAN*/
920 #define AR5K_LED_AUTH   2 /*IEEE80211_S_AUTH*/
921 #define AR5K_LED_ASSOC  3 /*IEEE80211_S_ASSOC*/
922 #define AR5K_LED_RUN    4 /*IEEE80211_S_RUN*/
923
924 /* GPIO-controlled software LED */
925 #define AR5K_SOFTLED_PIN        0
926 #define AR5K_SOFTLED_ON         0
927 #define AR5K_SOFTLED_OFF        1
928
929 /*
930  * Chipset capabilities -see ath5k_hw_get_capability-
931  * get_capability function is not yet fully implemented
932  * in ath5k so most of these don't work yet...
933  * TODO: Implement these & merge with _TUNE_ stuff above
934  */
935 enum ath5k_capability_type {
936         AR5K_CAP_REG_DMN                = 0,    /* Used to get current reg. domain id */
937         AR5K_CAP_TKIP_MIC               = 2,    /* Can handle TKIP MIC in hardware */
938         AR5K_CAP_TKIP_SPLIT             = 3,    /* TKIP uses split keys */
939         AR5K_CAP_PHYCOUNTERS            = 4,    /* PHY error counters */
940         AR5K_CAP_DIVERSITY              = 5,    /* Supports fast diversity */
941         AR5K_CAP_NUM_TXQUEUES           = 6,    /* Used to get max number of hw txqueues */
942         AR5K_CAP_VEOL                   = 7,    /* Supports virtual EOL */
943         AR5K_CAP_COMPRESSION            = 8,    /* Supports compression */
944         AR5K_CAP_BURST                  = 9,    /* Supports packet bursting */
945         AR5K_CAP_FASTFRAME              = 10,   /* Supports fast frames */
946         AR5K_CAP_TXPOW                  = 11,   /* Used to get global tx power limit */
947         AR5K_CAP_TPC                    = 12,   /* Can do per-packet tx power control (needed for 802.11a) */
948         AR5K_CAP_BSSIDMASK              = 13,   /* Supports bssid mask */
949         AR5K_CAP_MCAST_KEYSRCH          = 14,   /* Supports multicast key search */
950         AR5K_CAP_TSF_ADJUST             = 15,   /* Supports beacon tsf adjust */
951         AR5K_CAP_XR                     = 16,   /* Supports XR mode */
952         AR5K_CAP_WME_TKIPMIC            = 17,   /* Supports TKIP MIC when using WMM */
953         AR5K_CAP_CHAN_HALFRATE          = 18,   /* Supports half rate channels */
954         AR5K_CAP_CHAN_QUARTERRATE       = 19,   /* Supports quarter rate channels */
955         AR5K_CAP_RFSILENT               = 20,   /* Supports RFsilent */
956 };
957
958
959 /* XXX: we *may* move cap_range stuff to struct wiphy */
960 struct ath5k_capabilities {
961         /*
962          * Supported PHY modes
963          * (ie. CHANNEL_A, CHANNEL_B, ...)
964          */
965         DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
966
967         /*
968          * Frequency range (without regulation restrictions)
969          */
970         struct {
971                 u16     range_2ghz_min;
972                 u16     range_2ghz_max;
973                 u16     range_5ghz_min;
974                 u16     range_5ghz_max;
975         } cap_range;
976
977         /*
978          * Values stored in the EEPROM (some of them...)
979          */
980         struct ath5k_eeprom_info        cap_eeprom;
981
982         /*
983          * Queue information
984          */
985         struct {
986                 u8      q_tx_num;
987         } cap_queues;
988
989         bool cap_has_phyerr_counters;
990 };
991
992 /* size of noise floor history (keep it a power of two) */
993 #define ATH5K_NF_CAL_HIST_MAX   8
994 struct ath5k_nfcal_hist
995 {
996         s16 index;                              /* current index into nfval */
997         s16 nfval[ATH5K_NF_CAL_HIST_MAX];       /* last few noise floors */
998 };
999
1000 /**
1001  * struct avg_val - Helper structure for average calculation
1002  * @avg: contains the actual average value
1003  * @avg_weight: is used internally during calculation to prevent rounding errors
1004  */
1005 struct ath5k_avg_val {
1006         int avg;
1007         int avg_weight;
1008 };
1009
1010 /***************************************\
1011   HARDWARE ABSTRACTION LAYER STRUCTURE
1012 \***************************************/
1013
1014 /*
1015  * Misc defines
1016  */
1017
1018 #define AR5K_MAX_GPIO           10
1019 #define AR5K_MAX_RF_BANKS       8
1020
1021 /* TODO: Clean up and merge with ath5k_softc */
1022 struct ath5k_hw {
1023         struct ath_common       common;
1024
1025         struct ath5k_softc      *ah_sc;
1026         void __iomem            *ah_iobase;
1027
1028         enum ath5k_int          ah_imr;
1029
1030         struct ieee80211_channel *ah_current_channel;
1031         bool                    ah_turbo;
1032         bool                    ah_calibration;
1033         bool                    ah_single_chip;
1034         bool                    ah_aes_support;
1035         bool                    ah_combined_mic;
1036
1037         enum ath5k_version      ah_version;
1038         enum ath5k_radio        ah_radio;
1039         u32                     ah_phy;
1040         u32                     ah_mac_srev;
1041         u16                     ah_mac_version;
1042         u16                     ah_phy_revision;
1043         u16                     ah_radio_5ghz_revision;
1044         u16                     ah_radio_2ghz_revision;
1045
1046 #define ah_modes                ah_capabilities.cap_mode
1047 #define ah_ee_version           ah_capabilities.cap_eeprom.ee_version
1048
1049         u32                     ah_atim_window;
1050         u32                     ah_aifs;
1051         u32                     ah_cw_min;
1052         u32                     ah_cw_max;
1053         u32                     ah_limit_tx_retries;
1054         u8                      ah_coverage_class;
1055
1056         /* Antenna Control */
1057         u32                     ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
1058         u8                      ah_ant_mode;
1059         u8                      ah_tx_ant;
1060         u8                      ah_def_ant;
1061         bool                    ah_software_retry;
1062
1063         struct ath5k_capabilities ah_capabilities;
1064
1065         struct ath5k_txq_info   ah_txq[AR5K_NUM_TX_QUEUES];
1066         u32                     ah_txq_status;
1067         u32                     ah_txq_imr_txok;
1068         u32                     ah_txq_imr_txerr;
1069         u32                     ah_txq_imr_txurn;
1070         u32                     ah_txq_imr_txdesc;
1071         u32                     ah_txq_imr_txeol;
1072         u32                     ah_txq_imr_cbrorn;
1073         u32                     ah_txq_imr_cbrurn;
1074         u32                     ah_txq_imr_qtrig;
1075         u32                     ah_txq_imr_nofrm;
1076         u32                     ah_txq_isr;
1077         u32                     *ah_rf_banks;
1078         size_t                  ah_rf_banks_size;
1079         size_t                  ah_rf_regs_count;
1080         struct ath5k_gain       ah_gain;
1081         u8                      ah_offset[AR5K_MAX_RF_BANKS];
1082
1083
1084         struct {
1085                 /* Temporary tables used for interpolation */
1086                 u8              tmpL[AR5K_EEPROM_N_PD_GAINS]
1087                                         [AR5K_EEPROM_POWER_TABLE_SIZE];
1088                 u8              tmpR[AR5K_EEPROM_N_PD_GAINS]
1089                                         [AR5K_EEPROM_POWER_TABLE_SIZE];
1090                 u8              txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2];
1091                 u16             txp_rates_power_table[AR5K_MAX_RATES];
1092                 u8              txp_min_idx;
1093                 bool            txp_tpc;
1094                 /* Values in 0.25dB units */
1095                 s16             txp_min_pwr;
1096                 s16             txp_max_pwr;
1097                 /* Values in 0.5dB units */
1098                 s16             txp_offset;
1099                 s16             txp_ofdm;
1100                 s16             txp_cck_ofdm_gainf_delta;
1101                 /* Value in dB units */
1102                 s16             txp_cck_ofdm_pwr_delta;
1103         } ah_txpower;
1104
1105         struct {
1106                 bool            r_enabled;
1107                 int             r_last_alert;
1108                 struct ieee80211_channel r_last_channel;
1109         } ah_radar;
1110
1111         struct ath5k_nfcal_hist ah_nfcal_hist;
1112
1113         /* average beacon RSSI in our BSS (used by ANI) */
1114         struct ath5k_avg_val    ah_beacon_rssi_avg;
1115
1116         /* noise floor from last periodic calibration */
1117         s32                     ah_noise_floor;
1118
1119         /* Calibration timestamp */
1120         unsigned long           ah_cal_next_full;
1121         unsigned long           ah_cal_next_ani;
1122         unsigned long           ah_cal_next_nf;
1123
1124         /* Calibration mask */
1125         u8                      ah_cal_mask;
1126
1127         /*
1128          * Function pointers
1129          */
1130         int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1131                 unsigned int, unsigned int, int, enum ath5k_pkt_type,
1132                 unsigned int, unsigned int, unsigned int, unsigned int,
1133                 unsigned int, unsigned int, unsigned int, unsigned int);
1134         int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1135                 struct ath5k_tx_status *);
1136         int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1137                 struct ath5k_rx_status *);
1138 };
1139
1140 /*
1141  * Prototypes
1142  */
1143
1144 /* Attach/Detach Functions */
1145 int ath5k_hw_attach(struct ath5k_softc *sc);
1146 void ath5k_hw_detach(struct ath5k_hw *ah);
1147
1148 int ath5k_sysfs_register(struct ath5k_softc *sc);
1149 void ath5k_sysfs_unregister(struct ath5k_softc *sc);
1150
1151 /* LED functions */
1152 int ath5k_init_leds(struct ath5k_softc *sc);
1153 void ath5k_led_enable(struct ath5k_softc *sc);
1154 void ath5k_led_off(struct ath5k_softc *sc);
1155 void ath5k_unregister_leds(struct ath5k_softc *sc);
1156
1157 /* Reset Functions */
1158 int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
1159 int ath5k_hw_on_hold(struct ath5k_hw *ah);
1160 int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
1161                    struct ieee80211_channel *channel, bool change_channel);
1162 int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
1163                               bool is_set);
1164 /* Power management functions */
1165
1166 /* DMA Related Functions */
1167 void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
1168 int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
1169 u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
1170 void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
1171 int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
1172 int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
1173 u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
1174 int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
1175                                 u32 phys_addr);
1176 int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
1177 /* Interrupt handling */
1178 bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
1179 int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
1180 enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask);
1181 void ath5k_hw_update_mib_counters(struct ath5k_hw *ah);
1182
1183 /* EEPROM access functions */
1184 int ath5k_eeprom_init(struct ath5k_hw *ah);
1185 void ath5k_eeprom_detach(struct ath5k_hw *ah);
1186 int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
1187
1188 /* Protocol Control Unit Functions */
1189 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode);
1190 void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class);
1191 /* BSSID Functions */
1192 int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
1193 void ath5k_hw_set_associd(struct ath5k_hw *ah);
1194 void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
1195 /* Receive start/stop functions */
1196 void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
1197 void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
1198 /* RX Filter functions */
1199 void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
1200 u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
1201 void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
1202 /* Beacon control functions */
1203 u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
1204 void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64);
1205 void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
1206 void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
1207 /* ACK bit rate */
1208 void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
1209 /* Clock rate related functions */
1210 unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec);
1211 unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock);
1212 unsigned int ath5k_hw_get_clockrate(struct ath5k_hw *ah);
1213 /* Key table (WEP) functions */
1214 int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
1215 int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
1216                      const struct ieee80211_key_conf *key, const u8 *mac);
1217 int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
1218
1219 /* Queue Control Unit, DFS Control Unit Functions */
1220 int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
1221                                struct ath5k_txq_info *queue_info);
1222 int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
1223                                const struct ath5k_txq_info *queue_info);
1224 int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
1225                             enum ath5k_tx_queue queue_type,
1226                             struct ath5k_txq_info *queue_info);
1227 u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
1228 void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1229 int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1230 int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
1231
1232 /* Hardware Descriptor Functions */
1233 int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
1234 int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
1235                            u32 size, unsigned int flags);
1236 int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
1237         unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
1238         u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3);
1239
1240 /* GPIO Functions */
1241 void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
1242 int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
1243 int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
1244 u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
1245 int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
1246 void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
1247                             u32 interrupt_level);
1248
1249 /* rfkill Functions */
1250 void ath5k_rfkill_hw_start(struct ath5k_hw *ah);
1251 void ath5k_rfkill_hw_stop(struct ath5k_hw *ah);
1252
1253 /* Misc functions */
1254 int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
1255 int ath5k_hw_get_capability(struct ath5k_hw *ah,
1256                             enum ath5k_capability_type cap_type, u32 capability,
1257                             u32 *result);
1258 int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
1259 int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
1260
1261 /* Initial register settings functions */
1262 int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
1263
1264 /* Initialize RF */
1265 int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
1266                          struct ieee80211_channel *channel,
1267                          unsigned int mode);
1268 int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq);
1269 enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah);
1270 int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah);
1271 /* PHY/RF channel functions */
1272 bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
1273 int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1274 /* PHY calibration */
1275 void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah);
1276 int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
1277                            struct ieee80211_channel *channel);
1278 void ath5k_hw_update_noise_floor(struct ath5k_hw *ah);
1279 /* Spur mitigation */
1280 bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
1281                                   struct ieee80211_channel *channel);
1282 void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
1283                                          struct ieee80211_channel *channel);
1284 /* Misc PHY functions */
1285 u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
1286 int ath5k_hw_phy_disable(struct ath5k_hw *ah);
1287 /* Antenna control */
1288 void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode);
1289 void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode);
1290 /* TX power setup */
1291 int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
1292                      u8 ee_mode, u8 txpower);
1293 int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
1294
1295 /*
1296  * Functions used internaly
1297  */
1298
1299 static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
1300 {
1301         return &ah->common;
1302 }
1303
1304 static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
1305 {
1306         return &(ath5k_hw_common(ah)->regulatory);
1307 }
1308
1309 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
1310 {
1311         return ioread32(ah->ah_iobase + reg);
1312 }
1313
1314 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
1315 {
1316         iowrite32(val, ah->ah_iobase + reg);
1317 }
1318
1319 static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
1320 {
1321         u32 retval = 0, bit, i;
1322
1323         for (i = 0; i < bits; i++) {
1324                 bit = (val >> i) & 1;
1325                 retval = (retval << 1) | bit;
1326         }
1327
1328         return retval;
1329 }
1330
1331 #define AVG_SAMPLES     8
1332 #define AVG_FACTOR      1000
1333
1334 /**
1335  * ath5k_moving_average -  Exponentially weighted moving average
1336  * @avg: average structure
1337  * @val: current value
1338  *
1339  * This implementation make use of a struct ath5k_avg_val to prevent rounding
1340  * errors.
1341  */
1342 static inline struct ath5k_avg_val
1343 ath5k_moving_average(const struct ath5k_avg_val avg, const int val)
1344 {
1345         struct ath5k_avg_val new;
1346         new.avg_weight = avg.avg_weight  ?
1347                 (((avg.avg_weight * ((AVG_SAMPLES) - 1)) +
1348                         (val * (AVG_FACTOR))) / (AVG_SAMPLES)) :
1349                 (val * (AVG_FACTOR));
1350         new.avg = new.avg_weight / (AVG_FACTOR);
1351         return new;
1352 }
1353
1354 #endif