db9897e825b458ded1bcb3a2afd003b099fff296
[platform/kernel/linux-starfive.git] / drivers / net / usb / r8152.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  Copyright (c) 2014 Realtek Semiconductor Corp. All rights reserved.
4  */
5
6 #include <linux/signal.h>
7 #include <linux/slab.h>
8 #include <linux/module.h>
9 #include <linux/netdevice.h>
10 #include <linux/etherdevice.h>
11 #include <linux/mii.h>
12 #include <linux/ethtool.h>
13 #include <linux/usb.h>
14 #include <linux/crc32.h>
15 #include <linux/if_vlan.h>
16 #include <linux/uaccess.h>
17 #include <linux/list.h>
18 #include <linux/ip.h>
19 #include <linux/ipv6.h>
20 #include <net/ip6_checksum.h>
21 #include <uapi/linux/mdio.h>
22 #include <linux/mdio.h>
23 #include <linux/usb/cdc.h>
24 #include <linux/suspend.h>
25 #include <linux/atomic.h>
26 #include <linux/acpi.h>
27 #include <linux/firmware.h>
28 #include <crypto/hash.h>
29 #include <linux/usb/r8152.h>
30 #include <net/gso.h>
31
32 /* Information for net-next */
33 #define NETNEXT_VERSION         "12"
34
35 /* Information for net */
36 #define NET_VERSION             "13"
37
38 #define DRIVER_VERSION          "v1." NETNEXT_VERSION "." NET_VERSION
39 #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
40 #define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
41 #define MODULENAME "r8152"
42
43 #define R8152_PHY_ID            32
44
45 #define PLA_IDR                 0xc000
46 #define PLA_RCR                 0xc010
47 #define PLA_RCR1                0xc012
48 #define PLA_RMS                 0xc016
49 #define PLA_RXFIFO_CTRL0        0xc0a0
50 #define PLA_RXFIFO_FULL         0xc0a2
51 #define PLA_RXFIFO_CTRL1        0xc0a4
52 #define PLA_RX_FIFO_FULL        0xc0a6
53 #define PLA_RXFIFO_CTRL2        0xc0a8
54 #define PLA_RX_FIFO_EMPTY       0xc0aa
55 #define PLA_DMY_REG0            0xc0b0
56 #define PLA_FMC                 0xc0b4
57 #define PLA_CFG_WOL             0xc0b6
58 #define PLA_TEREDO_CFG          0xc0bc
59 #define PLA_TEREDO_WAKE_BASE    0xc0c4
60 #define PLA_MAR                 0xcd00
61 #define PLA_BACKUP              0xd000
62 #define PLA_BDC_CR              0xd1a0
63 #define PLA_TEREDO_TIMER        0xd2cc
64 #define PLA_REALWOW_TIMER       0xd2e8
65 #define PLA_UPHY_TIMER          0xd388
66 #define PLA_SUSPEND_FLAG        0xd38a
67 #define PLA_INDICATE_FALG       0xd38c
68 #define PLA_MACDBG_PRE          0xd38c  /* RTL_VER_04 only */
69 #define PLA_MACDBG_POST         0xd38e  /* RTL_VER_04 only */
70 #define PLA_EXTRA_STATUS        0xd398
71 #define PLA_GPHY_CTRL           0xd3ae
72 #define PLA_POL_GPIO_CTRL       0xdc6a
73 #define PLA_EFUSE_DATA          0xdd00
74 #define PLA_EFUSE_CMD           0xdd02
75 #define PLA_LEDSEL              0xdd90
76 #define PLA_LED_FEATURE         0xdd92
77 #define PLA_PHYAR               0xde00
78 #define PLA_BOOT_CTRL           0xe004
79 #define PLA_LWAKE_CTRL_REG      0xe007
80 #define PLA_GPHY_INTR_IMR       0xe022
81 #define PLA_EEE_CR              0xe040
82 #define PLA_EEE_TXTWSYS         0xe04c
83 #define PLA_EEE_TXTWSYS_2P5G    0xe058
84 #define PLA_EEEP_CR             0xe080
85 #define PLA_MAC_PWR_CTRL        0xe0c0
86 #define PLA_MAC_PWR_CTRL2       0xe0ca
87 #define PLA_MAC_PWR_CTRL3       0xe0cc
88 #define PLA_MAC_PWR_CTRL4       0xe0ce
89 #define PLA_WDT6_CTRL           0xe428
90 #define PLA_TCR0                0xe610
91 #define PLA_TCR1                0xe612
92 #define PLA_MTPS                0xe615
93 #define PLA_TXFIFO_CTRL         0xe618
94 #define PLA_TXFIFO_FULL         0xe61a
95 #define PLA_RSTTALLY            0xe800
96 #define PLA_CR                  0xe813
97 #define PLA_CRWECR              0xe81c
98 #define PLA_CONFIG12            0xe81e  /* CONFIG1, CONFIG2 */
99 #define PLA_CONFIG34            0xe820  /* CONFIG3, CONFIG4 */
100 #define PLA_CONFIG5             0xe822
101 #define PLA_PHY_PWR             0xe84c
102 #define PLA_OOB_CTRL            0xe84f
103 #define PLA_CPCR                0xe854
104 #define PLA_MISC_0              0xe858
105 #define PLA_MISC_1              0xe85a
106 #define PLA_OCP_GPHY_BASE       0xe86c
107 #define PLA_TALLYCNT            0xe890
108 #define PLA_SFF_STS_7           0xe8de
109 #define PLA_PHYSTATUS           0xe908
110 #define PLA_CONFIG6             0xe90a /* CONFIG6 */
111 #define PLA_USB_CFG             0xe952
112 #define PLA_BP_BA               0xfc26
113 #define PLA_BP_0                0xfc28
114 #define PLA_BP_1                0xfc2a
115 #define PLA_BP_2                0xfc2c
116 #define PLA_BP_3                0xfc2e
117 #define PLA_BP_4                0xfc30
118 #define PLA_BP_5                0xfc32
119 #define PLA_BP_6                0xfc34
120 #define PLA_BP_7                0xfc36
121 #define PLA_BP_EN               0xfc38
122
123 #define USB_USB2PHY             0xb41e
124 #define USB_SSPHYLINK1          0xb426
125 #define USB_SSPHYLINK2          0xb428
126 #define USB_L1_CTRL             0xb45e
127 #define USB_U2P3_CTRL           0xb460
128 #define USB_CSR_DUMMY1          0xb464
129 #define USB_CSR_DUMMY2          0xb466
130 #define USB_DEV_STAT            0xb808
131 #define USB_CONNECT_TIMER       0xcbf8
132 #define USB_MSC_TIMER           0xcbfc
133 #define USB_BURST_SIZE          0xcfc0
134 #define USB_FW_FIX_EN0          0xcfca
135 #define USB_FW_FIX_EN1          0xcfcc
136 #define USB_LPM_CONFIG          0xcfd8
137 #define USB_ECM_OPTION          0xcfee
138 #define USB_CSTMR               0xcfef  /* RTL8153A */
139 #define USB_MISC_2              0xcfff
140 #define USB_ECM_OP              0xd26b
141 #define USB_GPHY_CTRL           0xd284
142 #define USB_SPEED_OPTION        0xd32a
143 #define USB_FW_CTRL             0xd334  /* RTL8153B */
144 #define USB_FC_TIMER            0xd340
145 #define USB_USB_CTRL            0xd406
146 #define USB_PHY_CTRL            0xd408
147 #define USB_TX_AGG              0xd40a
148 #define USB_RX_BUF_TH           0xd40c
149 #define USB_USB_TIMER           0xd428
150 #define USB_RX_EARLY_TIMEOUT    0xd42c
151 #define USB_RX_EARLY_SIZE       0xd42e
152 #define USB_PM_CTRL_STATUS      0xd432  /* RTL8153A */
153 #define USB_RX_EXTRA_AGGR_TMR   0xd432  /* RTL8153B */
154 #define USB_TX_DMA              0xd434
155 #define USB_UPT_RXDMA_OWN       0xd437
156 #define USB_UPHY3_MDCMDIO       0xd480
157 #define USB_TOLERANCE           0xd490
158 #define USB_LPM_CTRL            0xd41a
159 #define USB_BMU_RESET           0xd4b0
160 #define USB_BMU_CONFIG          0xd4b4
161 #define USB_U1U2_TIMER          0xd4da
162 #define USB_FW_TASK             0xd4e8  /* RTL8153B */
163 #define USB_RX_AGGR_NUM         0xd4ee
164 #define USB_UPS_CTRL            0xd800
165 #define USB_POWER_CUT           0xd80a
166 #define USB_MISC_0              0xd81a
167 #define USB_MISC_1              0xd81f
168 #define USB_AFE_CTRL2           0xd824
169 #define USB_UPHY_XTAL           0xd826
170 #define USB_UPS_CFG             0xd842
171 #define USB_UPS_FLAGS           0xd848
172 #define USB_WDT1_CTRL           0xe404
173 #define USB_WDT11_CTRL          0xe43c
174 #define USB_BP_BA               PLA_BP_BA
175 #define USB_BP_0                PLA_BP_0
176 #define USB_BP_1                PLA_BP_1
177 #define USB_BP_2                PLA_BP_2
178 #define USB_BP_3                PLA_BP_3
179 #define USB_BP_4                PLA_BP_4
180 #define USB_BP_5                PLA_BP_5
181 #define USB_BP_6                PLA_BP_6
182 #define USB_BP_7                PLA_BP_7
183 #define USB_BP_EN               PLA_BP_EN       /* RTL8153A */
184 #define USB_BP_8                0xfc38          /* RTL8153B */
185 #define USB_BP_9                0xfc3a
186 #define USB_BP_10               0xfc3c
187 #define USB_BP_11               0xfc3e
188 #define USB_BP_12               0xfc40
189 #define USB_BP_13               0xfc42
190 #define USB_BP_14               0xfc44
191 #define USB_BP_15               0xfc46
192 #define USB_BP2_EN              0xfc48
193
194 /* OCP Registers */
195 #define OCP_ALDPS_CONFIG        0x2010
196 #define OCP_EEE_CONFIG1         0x2080
197 #define OCP_EEE_CONFIG2         0x2092
198 #define OCP_EEE_CONFIG3         0x2094
199 #define OCP_BASE_MII            0xa400
200 #define OCP_EEE_AR              0xa41a
201 #define OCP_EEE_DATA            0xa41c
202 #define OCP_PHY_STATUS          0xa420
203 #define OCP_INTR_EN             0xa424
204 #define OCP_NCTL_CFG            0xa42c
205 #define OCP_POWER_CFG           0xa430
206 #define OCP_EEE_CFG             0xa432
207 #define OCP_SRAM_ADDR           0xa436
208 #define OCP_SRAM_DATA           0xa438
209 #define OCP_DOWN_SPEED          0xa442
210 #define OCP_EEE_ABLE            0xa5c4
211 #define OCP_EEE_ADV             0xa5d0
212 #define OCP_EEE_LPABLE          0xa5d2
213 #define OCP_10GBT_CTRL          0xa5d4
214 #define OCP_10GBT_STAT          0xa5d6
215 #define OCP_EEE_ADV2            0xa6d4
216 #define OCP_PHY_STATE           0xa708          /* nway state for 8153 */
217 #define OCP_PHY_PATCH_STAT      0xb800
218 #define OCP_PHY_PATCH_CMD       0xb820
219 #define OCP_PHY_LOCK            0xb82e
220 #define OCP_ADC_IOFFSET         0xbcfc
221 #define OCP_ADC_CFG             0xbc06
222 #define OCP_SYSCLK_CFG          0xc416
223
224 /* SRAM Register */
225 #define SRAM_GREEN_CFG          0x8011
226 #define SRAM_LPF_CFG            0x8012
227 #define SRAM_GPHY_FW_VER        0x801e
228 #define SRAM_10M_AMP1           0x8080
229 #define SRAM_10M_AMP2           0x8082
230 #define SRAM_IMPEDANCE          0x8084
231 #define SRAM_PHY_LOCK           0xb82e
232
233 /* PLA_RCR */
234 #define RCR_AAP                 0x00000001
235 #define RCR_APM                 0x00000002
236 #define RCR_AM                  0x00000004
237 #define RCR_AB                  0x00000008
238 #define RCR_ACPT_ALL            (RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
239 #define SLOT_EN                 BIT(11)
240
241 /* PLA_RCR1 */
242 #define OUTER_VLAN              BIT(7)
243 #define INNER_VLAN              BIT(6)
244
245 /* PLA_RXFIFO_CTRL0 */
246 #define RXFIFO_THR1_NORMAL      0x00080002
247 #define RXFIFO_THR1_OOB         0x01800003
248
249 /* PLA_RXFIFO_FULL */
250 #define RXFIFO_FULL_MASK        0xfff
251
252 /* PLA_RXFIFO_CTRL1 */
253 #define RXFIFO_THR2_FULL        0x00000060
254 #define RXFIFO_THR2_HIGH        0x00000038
255 #define RXFIFO_THR2_OOB         0x0000004a
256 #define RXFIFO_THR2_NORMAL      0x00a0
257
258 /* PLA_RXFIFO_CTRL2 */
259 #define RXFIFO_THR3_FULL        0x00000078
260 #define RXFIFO_THR3_HIGH        0x00000048
261 #define RXFIFO_THR3_OOB         0x0000005a
262 #define RXFIFO_THR3_NORMAL      0x0110
263
264 /* PLA_TXFIFO_CTRL */
265 #define TXFIFO_THR_NORMAL       0x00400008
266 #define TXFIFO_THR_NORMAL2      0x01000008
267
268 /* PLA_DMY_REG0 */
269 #define ECM_ALDPS               0x0002
270
271 /* PLA_FMC */
272 #define FMC_FCR_MCU_EN          0x0001
273
274 /* PLA_EEEP_CR */
275 #define EEEP_CR_EEEP_TX         0x0002
276
277 /* PLA_WDT6_CTRL */
278 #define WDT6_SET_MODE           0x0010
279
280 /* PLA_TCR0 */
281 #define TCR0_TX_EMPTY           0x0800
282 #define TCR0_AUTO_FIFO          0x0080
283
284 /* PLA_TCR1 */
285 #define VERSION_MASK            0x7cf0
286 #define IFG_MASK                (BIT(3) | BIT(9) | BIT(8))
287 #define IFG_144NS               BIT(9)
288 #define IFG_96NS                (BIT(9) | BIT(8))
289
290 /* PLA_MTPS */
291 #define MTPS_JUMBO              (12 * 1024 / 64)
292 #define MTPS_DEFAULT            (6 * 1024 / 64)
293
294 /* PLA_RSTTALLY */
295 #define TALLY_RESET             0x0001
296
297 /* PLA_CR */
298 #define CR_RST                  0x10
299 #define CR_RE                   0x08
300 #define CR_TE                   0x04
301
302 /* PLA_CRWECR */
303 #define CRWECR_NORAML           0x00
304 #define CRWECR_CONFIG           0xc0
305
306 /* PLA_OOB_CTRL */
307 #define NOW_IS_OOB              0x80
308 #define TXFIFO_EMPTY            0x20
309 #define RXFIFO_EMPTY            0x10
310 #define LINK_LIST_READY         0x02
311 #define DIS_MCU_CLROOB          0x01
312 #define FIFO_EMPTY              (TXFIFO_EMPTY | RXFIFO_EMPTY)
313
314 /* PLA_MISC_1 */
315 #define RXDY_GATED_EN           0x0008
316
317 /* PLA_SFF_STS_7 */
318 #define RE_INIT_LL              0x8000
319 #define MCU_BORW_EN             0x4000
320
321 /* PLA_CPCR */
322 #define FLOW_CTRL_EN            BIT(0)
323 #define CPCR_RX_VLAN            0x0040
324
325 /* PLA_CFG_WOL */
326 #define MAGIC_EN                0x0001
327
328 /* PLA_TEREDO_CFG */
329 #define TEREDO_SEL              0x8000
330 #define TEREDO_WAKE_MASK        0x7f00
331 #define TEREDO_RS_EVENT_MASK    0x00fe
332 #define OOB_TEREDO_EN           0x0001
333
334 /* PLA_BDC_CR */
335 #define ALDPS_PROXY_MODE        0x0001
336
337 /* PLA_EFUSE_CMD */
338 #define EFUSE_READ_CMD          BIT(15)
339 #define EFUSE_DATA_BIT16        BIT(7)
340
341 /* PLA_CONFIG34 */
342 #define LINK_ON_WAKE_EN         0x0010
343 #define LINK_OFF_WAKE_EN        0x0008
344
345 /* PLA_CONFIG6 */
346 #define LANWAKE_CLR_EN          BIT(0)
347
348 /* PLA_USB_CFG */
349 #define EN_XG_LIP               BIT(1)
350 #define EN_G_LIP                BIT(2)
351
352 /* PLA_CONFIG5 */
353 #define BWF_EN                  0x0040
354 #define MWF_EN                  0x0020
355 #define UWF_EN                  0x0010
356 #define LAN_WAKE_EN             0x0002
357
358 /* PLA_LED_FEATURE */
359 #define LED_MODE_MASK           0x0700
360
361 /* PLA_PHY_PWR */
362 #define TX_10M_IDLE_EN          0x0080
363 #define PFM_PWM_SWITCH          0x0040
364 #define TEST_IO_OFF             BIT(4)
365
366 /* PLA_MAC_PWR_CTRL */
367 #define D3_CLK_GATED_EN         0x00004000
368 #define MCU_CLK_RATIO           0x07010f07
369 #define MCU_CLK_RATIO_MASK      0x0f0f0f0f
370 #define ALDPS_SPDWN_RATIO       0x0f87
371
372 /* PLA_MAC_PWR_CTRL2 */
373 #define EEE_SPDWN_RATIO         0x8007
374 #define MAC_CLK_SPDWN_EN        BIT(15)
375 #define EEE_SPDWN_RATIO_MASK    0xff
376
377 /* PLA_MAC_PWR_CTRL3 */
378 #define PLA_MCU_SPDWN_EN        BIT(14)
379 #define PKT_AVAIL_SPDWN_EN      0x0100
380 #define SUSPEND_SPDWN_EN        0x0004
381 #define U1U2_SPDWN_EN           0x0002
382 #define L1_SPDWN_EN             0x0001
383
384 /* PLA_MAC_PWR_CTRL4 */
385 #define PWRSAVE_SPDWN_EN        0x1000
386 #define RXDV_SPDWN_EN           0x0800
387 #define TX10MIDLE_EN            0x0100
388 #define IDLE_SPDWN_EN           BIT(6)
389 #define TP100_SPDWN_EN          0x0020
390 #define TP500_SPDWN_EN          0x0010
391 #define TP1000_SPDWN_EN         0x0008
392 #define EEE_SPDWN_EN            0x0001
393
394 /* PLA_GPHY_INTR_IMR */
395 #define GPHY_STS_MSK            0x0001
396 #define SPEED_DOWN_MSK          0x0002
397 #define SPDWN_RXDV_MSK          0x0004
398 #define SPDWN_LINKCHG_MSK       0x0008
399
400 /* PLA_PHYAR */
401 #define PHYAR_FLAG              0x80000000
402
403 /* PLA_EEE_CR */
404 #define EEE_RX_EN               0x0001
405 #define EEE_TX_EN               0x0002
406
407 /* PLA_BOOT_CTRL */
408 #define AUTOLOAD_DONE           0x0002
409
410 /* PLA_LWAKE_CTRL_REG */
411 #define LANWAKE_PIN             BIT(7)
412
413 /* PLA_SUSPEND_FLAG */
414 #define LINK_CHG_EVENT          BIT(0)
415
416 /* PLA_INDICATE_FALG */
417 #define UPCOMING_RUNTIME_D3     BIT(0)
418
419 /* PLA_MACDBG_PRE and PLA_MACDBG_POST */
420 #define DEBUG_OE                BIT(0)
421 #define DEBUG_LTSSM             0x0082
422
423 /* PLA_EXTRA_STATUS */
424 #define CUR_LINK_OK             BIT(15)
425 #define U3P3_CHECK_EN           BIT(7)  /* RTL_VER_05 only */
426 #define LINK_CHANGE_FLAG        BIT(8)
427 #define POLL_LINK_CHG           BIT(0)
428
429 /* PLA_GPHY_CTRL */
430 #define GPHY_FLASH              BIT(1)
431
432 /* PLA_POL_GPIO_CTRL */
433 #define DACK_DET_EN             BIT(15)
434 #define POL_GPHY_PATCH          BIT(4)
435
436 /* USB_USB2PHY */
437 #define USB2PHY_SUSPEND         0x0001
438 #define USB2PHY_L1              0x0002
439
440 /* USB_SSPHYLINK1 */
441 #define DELAY_PHY_PWR_CHG       BIT(1)
442
443 /* USB_SSPHYLINK2 */
444 #define pwd_dn_scale_mask       0x3ffe
445 #define pwd_dn_scale(x)         ((x) << 1)
446
447 /* USB_CSR_DUMMY1 */
448 #define DYNAMIC_BURST           0x0001
449
450 /* USB_CSR_DUMMY2 */
451 #define EP4_FULL_FC             0x0001
452
453 /* USB_DEV_STAT */
454 #define STAT_SPEED_MASK         0x0006
455 #define STAT_SPEED_HIGH         0x0000
456 #define STAT_SPEED_FULL         0x0002
457
458 /* USB_FW_FIX_EN0 */
459 #define FW_FIX_SUSPEND          BIT(14)
460
461 /* USB_FW_FIX_EN1 */
462 #define FW_IP_RESET_EN          BIT(9)
463
464 /* USB_LPM_CONFIG */
465 #define LPM_U1U2_EN             BIT(0)
466
467 /* USB_TX_AGG */
468 #define TX_AGG_MAX_THRESHOLD    0x03
469
470 /* USB_RX_BUF_TH */
471 #define RX_THR_SUPPER           0x0c350180
472 #define RX_THR_HIGH             0x7a120180
473 #define RX_THR_SLOW             0xffff0180
474 #define RX_THR_B                0x00010001
475
476 /* USB_TX_DMA */
477 #define TEST_MODE_DISABLE       0x00000001
478 #define TX_SIZE_ADJUST1         0x00000100
479
480 /* USB_BMU_RESET */
481 #define BMU_RESET_EP_IN         0x01
482 #define BMU_RESET_EP_OUT        0x02
483
484 /* USB_BMU_CONFIG */
485 #define ACT_ODMA                BIT(1)
486
487 /* USB_UPT_RXDMA_OWN */
488 #define OWN_UPDATE              BIT(0)
489 #define OWN_CLEAR               BIT(1)
490
491 /* USB_FW_TASK */
492 #define FC_PATCH_TASK           BIT(1)
493
494 /* USB_RX_AGGR_NUM */
495 #define RX_AGGR_NUM_MASK        0x1ff
496
497 /* USB_UPS_CTRL */
498 #define POWER_CUT               0x0100
499
500 /* USB_PM_CTRL_STATUS */
501 #define RESUME_INDICATE         0x0001
502
503 /* USB_ECM_OPTION */
504 #define BYPASS_MAC_RESET        BIT(5)
505
506 /* USB_CSTMR */
507 #define FORCE_SUPER             BIT(0)
508
509 /* USB_MISC_2 */
510 #define UPS_FORCE_PWR_DOWN      BIT(0)
511
512 /* USB_ECM_OP */
513 #define EN_ALL_SPEED            BIT(0)
514
515 /* USB_GPHY_CTRL */
516 #define GPHY_PATCH_DONE         BIT(2)
517 #define BYPASS_FLASH            BIT(5)
518 #define BACKUP_RESTRORE         BIT(6)
519
520 /* USB_SPEED_OPTION */
521 #define RG_PWRDN_EN             BIT(8)
522 #define ALL_SPEED_OFF           BIT(9)
523
524 /* USB_FW_CTRL */
525 #define FLOW_CTRL_PATCH_OPT     BIT(1)
526 #define AUTO_SPEEDUP            BIT(3)
527 #define FLOW_CTRL_PATCH_2       BIT(8)
528
529 /* USB_FC_TIMER */
530 #define CTRL_TIMER_EN           BIT(15)
531
532 /* USB_USB_CTRL */
533 #define CDC_ECM_EN              BIT(3)
534 #define RX_AGG_DISABLE          0x0010
535 #define RX_ZERO_EN              0x0080
536
537 /* USB_U2P3_CTRL */
538 #define U2P3_ENABLE             0x0001
539 #define RX_DETECT8              BIT(3)
540
541 /* USB_POWER_CUT */
542 #define PWR_EN                  0x0001
543 #define PHASE2_EN               0x0008
544 #define UPS_EN                  BIT(4)
545 #define USP_PREWAKE             BIT(5)
546
547 /* USB_MISC_0 */
548 #define PCUT_STATUS             0x0001
549
550 /* USB_RX_EARLY_TIMEOUT */
551 #define COALESCE_SUPER           85000U
552 #define COALESCE_HIGH           250000U
553 #define COALESCE_SLOW           524280U
554
555 /* USB_WDT1_CTRL */
556 #define WTD1_EN                 BIT(0)
557
558 /* USB_WDT11_CTRL */
559 #define TIMER11_EN              0x0001
560
561 /* USB_LPM_CTRL */
562 /* bit 4 ~ 5: fifo empty boundary */
563 #define FIFO_EMPTY_1FB          0x30    /* 0x1fb * 64 = 32448 bytes */
564 /* bit 2 ~ 3: LMP timer */
565 #define LPM_TIMER_MASK          0x0c
566 #define LPM_TIMER_500MS         0x04    /* 500 ms */
567 #define LPM_TIMER_500US         0x0c    /* 500 us */
568 #define ROK_EXIT_LPM            0x02
569
570 /* USB_AFE_CTRL2 */
571 #define SEN_VAL_MASK            0xf800
572 #define SEN_VAL_NORMAL          0xa000
573 #define SEL_RXIDLE              0x0100
574
575 /* USB_UPHY_XTAL */
576 #define OOBS_POLLING            BIT(8)
577
578 /* USB_UPS_CFG */
579 #define SAW_CNT_1MS_MASK        0x0fff
580 #define MID_REVERSE             BIT(5)  /* RTL8156A */
581
582 /* USB_UPS_FLAGS */
583 #define UPS_FLAGS_R_TUNE                BIT(0)
584 #define UPS_FLAGS_EN_10M_CKDIV          BIT(1)
585 #define UPS_FLAGS_250M_CKDIV            BIT(2)
586 #define UPS_FLAGS_EN_ALDPS              BIT(3)
587 #define UPS_FLAGS_CTAP_SHORT_DIS        BIT(4)
588 #define UPS_FLAGS_SPEED_MASK            (0xf << 16)
589 #define ups_flags_speed(x)              ((x) << 16)
590 #define UPS_FLAGS_EN_EEE                BIT(20)
591 #define UPS_FLAGS_EN_500M_EEE           BIT(21)
592 #define UPS_FLAGS_EN_EEE_CKDIV          BIT(22)
593 #define UPS_FLAGS_EEE_PLLOFF_100        BIT(23)
594 #define UPS_FLAGS_EEE_PLLOFF_GIGA       BIT(24)
595 #define UPS_FLAGS_EEE_CMOD_LV_EN        BIT(25)
596 #define UPS_FLAGS_EN_GREEN              BIT(26)
597 #define UPS_FLAGS_EN_FLOW_CTR           BIT(27)
598
599 enum spd_duplex {
600         NWAY_10M_HALF,
601         NWAY_10M_FULL,
602         NWAY_100M_HALF,
603         NWAY_100M_FULL,
604         NWAY_1000M_FULL,
605         FORCE_10M_HALF,
606         FORCE_10M_FULL,
607         FORCE_100M_HALF,
608         FORCE_100M_FULL,
609         FORCE_1000M_FULL,
610         NWAY_2500M_FULL,
611 };
612
613 /* OCP_ALDPS_CONFIG */
614 #define ENPWRSAVE               0x8000
615 #define ENPDNPS                 0x0200
616 #define LINKENA                 0x0100
617 #define DIS_SDSAVE              0x0010
618
619 /* OCP_PHY_STATUS */
620 #define PHY_STAT_MASK           0x0007
621 #define PHY_STAT_EXT_INIT       2
622 #define PHY_STAT_LAN_ON         3
623 #define PHY_STAT_PWRDN          5
624
625 /* OCP_INTR_EN */
626 #define INTR_SPEED_FORCE        BIT(3)
627
628 /* OCP_NCTL_CFG */
629 #define PGA_RETURN_EN           BIT(1)
630
631 /* OCP_POWER_CFG */
632 #define EEE_CLKDIV_EN           0x8000
633 #define EN_ALDPS                0x0004
634 #define EN_10M_PLLOFF           0x0001
635
636 /* OCP_EEE_CONFIG1 */
637 #define RG_TXLPI_MSK_HFDUP      0x8000
638 #define RG_MATCLR_EN            0x4000
639 #define EEE_10_CAP              0x2000
640 #define EEE_NWAY_EN             0x1000
641 #define TX_QUIET_EN             0x0200
642 #define RX_QUIET_EN             0x0100
643 #define sd_rise_time_mask       0x0070
644 #define sd_rise_time(x)         (min(x, 7) << 4)        /* bit 4 ~ 6 */
645 #define RG_RXLPI_MSK_HFDUP      0x0008
646 #define SDFALLTIME              0x0007  /* bit 0 ~ 2 */
647
648 /* OCP_EEE_CONFIG2 */
649 #define RG_LPIHYS_NUM           0x7000  /* bit 12 ~ 15 */
650 #define RG_DACQUIET_EN          0x0400
651 #define RG_LDVQUIET_EN          0x0200
652 #define RG_CKRSEL               0x0020
653 #define RG_EEEPRG_EN            0x0010
654
655 /* OCP_EEE_CONFIG3 */
656 #define fast_snr_mask           0xff80
657 #define fast_snr(x)             (min(x, 0x1ff) << 7)    /* bit 7 ~ 15 */
658 #define RG_LFS_SEL              0x0060  /* bit 6 ~ 5 */
659 #define MSK_PH                  0x0006  /* bit 0 ~ 3 */
660
661 /* OCP_EEE_AR */
662 /* bit[15:14] function */
663 #define FUN_ADDR                0x0000
664 #define FUN_DATA                0x4000
665 /* bit[4:0] device addr */
666
667 /* OCP_EEE_CFG */
668 #define CTAP_SHORT_EN           0x0040
669 #define EEE10_EN                0x0010
670
671 /* OCP_DOWN_SPEED */
672 #define EN_EEE_CMODE            BIT(14)
673 #define EN_EEE_1000             BIT(13)
674 #define EN_EEE_100              BIT(12)
675 #define EN_10M_CLKDIV           BIT(11)
676 #define EN_10M_BGOFF            0x0080
677
678 /* OCP_10GBT_CTRL */
679 #define RTL_ADV2_5G_F_R         BIT(5)  /* Advertise 2.5GBASE-T fast-retrain */
680
681 /* OCP_PHY_STATE */
682 #define TXDIS_STATE             0x01
683 #define ABD_STATE               0x02
684
685 /* OCP_PHY_PATCH_STAT */
686 #define PATCH_READY             BIT(6)
687
688 /* OCP_PHY_PATCH_CMD */
689 #define PATCH_REQUEST           BIT(4)
690
691 /* OCP_PHY_LOCK */
692 #define PATCH_LOCK              BIT(0)
693
694 /* OCP_ADC_CFG */
695 #define CKADSEL_L               0x0100
696 #define ADC_EN                  0x0080
697 #define EN_EMI_L                0x0040
698
699 /* OCP_SYSCLK_CFG */
700 #define sysclk_div_expo(x)      (min(x, 5) << 8)
701 #define clk_div_expo(x)         (min(x, 5) << 4)
702
703 /* SRAM_GREEN_CFG */
704 #define GREEN_ETH_EN            BIT(15)
705 #define R_TUNE_EN               BIT(11)
706
707 /* SRAM_LPF_CFG */
708 #define LPF_AUTO_TUNE           0x8000
709
710 /* SRAM_10M_AMP1 */
711 #define GDAC_IB_UPALL           0x0008
712
713 /* SRAM_10M_AMP2 */
714 #define AMP_DN                  0x0200
715
716 /* SRAM_IMPEDANCE */
717 #define RX_DRIVING_MASK         0x6000
718
719 /* SRAM_PHY_LOCK */
720 #define PHY_PATCH_LOCK          0x0001
721
722 /* MAC PASSTHRU */
723 #define AD_MASK                 0xfee0
724 #define BND_MASK                0x0004
725 #define BD_MASK                 0x0001
726 #define EFUSE                   0xcfdb
727 #define PASS_THRU_MASK          0x1
728
729 #define BP4_SUPER_ONLY          0x1578  /* RTL_VER_04 only */
730
731 enum rtl_register_content {
732         _2500bps        = BIT(10),
733         _1250bps        = BIT(9),
734         _500bps         = BIT(8),
735         _tx_flow        = BIT(6),
736         _rx_flow        = BIT(5),
737         _1000bps        = 0x10,
738         _100bps         = 0x08,
739         _10bps          = 0x04,
740         LINK_STATUS     = 0x02,
741         FULL_DUP        = 0x01,
742 };
743
744 #define is_speed_2500(_speed)   (((_speed) & (_2500bps | LINK_STATUS)) == (_2500bps | LINK_STATUS))
745 #define is_flow_control(_speed) (((_speed) & (_tx_flow | _rx_flow)) == (_tx_flow | _rx_flow))
746
747 #define RTL8152_MAX_TX          4
748 #define RTL8152_MAX_RX          10
749 #define INTBUFSIZE              2
750 #define TX_ALIGN                4
751 #define RX_ALIGN                8
752
753 #define RTL8152_RX_MAX_PENDING  4096
754 #define RTL8152_RXFG_HEADSZ     256
755
756 #define INTR_LINK               0x0004
757
758 #define RTL8152_RMS             (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
759 #define RTL8153_RMS             RTL8153_MAX_PACKET
760 #define RTL8152_TX_TIMEOUT      (5 * HZ)
761 #define mtu_to_size(m)          ((m) + VLAN_ETH_HLEN + ETH_FCS_LEN)
762 #define size_to_mtu(s)          ((s) - VLAN_ETH_HLEN - ETH_FCS_LEN)
763 #define rx_reserved_size(x)     (mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN)
764
765 /* rtl8152 flags */
766 enum rtl8152_flags {
767         RTL8152_UNPLUG = 0,
768         RTL8152_SET_RX_MODE,
769         WORK_ENABLE,
770         RTL8152_LINK_CHG,
771         SELECTIVE_SUSPEND,
772         PHY_RESET,
773         SCHEDULE_TASKLET,
774         GREEN_ETHERNET,
775         RX_EPROTO,
776 };
777
778 #define DEVICE_ID_LENOVO_USB_C_TRAVEL_HUB               0x721e
779 #define DEVICE_ID_THINKPAD_ONELINK_PLUS_DOCK            0x3054
780 #define DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2       0x3082
781 #define DEVICE_ID_THINKPAD_USB_C_DONGLE                 0x720c
782 #define DEVICE_ID_THINKPAD_USB_C_DOCK_GEN2              0xa387
783 #define DEVICE_ID_THINKPAD_USB_C_DOCK_GEN3              0x3062
784
785 struct tally_counter {
786         __le64  tx_packets;
787         __le64  rx_packets;
788         __le64  tx_errors;
789         __le32  rx_errors;
790         __le16  rx_missed;
791         __le16  align_errors;
792         __le32  tx_one_collision;
793         __le32  tx_multi_collision;
794         __le64  rx_unicast;
795         __le64  rx_broadcast;
796         __le32  rx_multicast;
797         __le16  tx_aborted;
798         __le16  tx_underrun;
799 };
800
801 struct rx_desc {
802         __le32 opts1;
803 #define RX_LEN_MASK                     0x7fff
804
805         __le32 opts2;
806 #define RD_UDP_CS                       BIT(23)
807 #define RD_TCP_CS                       BIT(22)
808 #define RD_IPV6_CS                      BIT(20)
809 #define RD_IPV4_CS                      BIT(19)
810
811         __le32 opts3;
812 #define IPF                             BIT(23) /* IP checksum fail */
813 #define UDPF                            BIT(22) /* UDP checksum fail */
814 #define TCPF                            BIT(21) /* TCP checksum fail */
815 #define RX_VLAN_TAG                     BIT(16)
816
817         __le32 opts4;
818         __le32 opts5;
819         __le32 opts6;
820 };
821
822 struct tx_desc {
823         __le32 opts1;
824 #define TX_FS                   BIT(31) /* First segment of a packet */
825 #define TX_LS                   BIT(30) /* Final segment of a packet */
826 #define GTSENDV4                BIT(28)
827 #define GTSENDV6                BIT(27)
828 #define GTTCPHO_SHIFT           18
829 #define GTTCPHO_MAX             0x7fU
830 #define TX_LEN_MAX              0x3ffffU
831
832         __le32 opts2;
833 #define UDP_CS                  BIT(31) /* Calculate UDP/IP checksum */
834 #define TCP_CS                  BIT(30) /* Calculate TCP/IP checksum */
835 #define IPV4_CS                 BIT(29) /* Calculate IPv4 checksum */
836 #define IPV6_CS                 BIT(28) /* Calculate IPv6 checksum */
837 #define MSS_SHIFT               17
838 #define MSS_MAX                 0x7ffU
839 #define TCPHO_SHIFT             17
840 #define TCPHO_MAX               0x7ffU
841 #define TX_VLAN_TAG             BIT(16)
842 };
843
844 struct r8152;
845
846 struct rx_agg {
847         struct list_head list, info_list;
848         struct urb *urb;
849         struct r8152 *context;
850         struct page *page;
851         void *buffer;
852 };
853
854 struct tx_agg {
855         struct list_head list;
856         struct urb *urb;
857         struct r8152 *context;
858         void *buffer;
859         void *head;
860         u32 skb_num;
861         u32 skb_len;
862 };
863
864 struct r8152 {
865         unsigned long flags;
866         struct usb_device *udev;
867         struct napi_struct napi;
868         struct usb_interface *intf;
869         struct net_device *netdev;
870         struct urb *intr_urb;
871         struct tx_agg tx_info[RTL8152_MAX_TX];
872         struct list_head rx_info, rx_used;
873         struct list_head rx_done, tx_free;
874         struct sk_buff_head tx_queue, rx_queue;
875         spinlock_t rx_lock, tx_lock;
876         struct delayed_work schedule, hw_phy_work;
877         struct mii_if_info mii;
878         struct mutex control;   /* use for hw setting */
879 #ifdef CONFIG_PM_SLEEP
880         struct notifier_block pm_notifier;
881 #endif
882         struct tasklet_struct tx_tl;
883
884         struct rtl_ops {
885                 void (*init)(struct r8152 *tp);
886                 int (*enable)(struct r8152 *tp);
887                 void (*disable)(struct r8152 *tp);
888                 void (*up)(struct r8152 *tp);
889                 void (*down)(struct r8152 *tp);
890                 void (*unload)(struct r8152 *tp);
891                 int (*eee_get)(struct r8152 *tp, struct ethtool_eee *eee);
892                 int (*eee_set)(struct r8152 *tp, struct ethtool_eee *eee);
893                 bool (*in_nway)(struct r8152 *tp);
894                 void (*hw_phy_cfg)(struct r8152 *tp);
895                 void (*autosuspend_en)(struct r8152 *tp, bool enable);
896                 void (*change_mtu)(struct r8152 *tp);
897         } rtl_ops;
898
899         struct ups_info {
900                 u32 r_tune:1;
901                 u32 _10m_ckdiv:1;
902                 u32 _250m_ckdiv:1;
903                 u32 aldps:1;
904                 u32 lite_mode:2;
905                 u32 speed_duplex:4;
906                 u32 eee:1;
907                 u32 eee_lite:1;
908                 u32 eee_ckdiv:1;
909                 u32 eee_plloff_100:1;
910                 u32 eee_plloff_giga:1;
911                 u32 eee_cmod_lv:1;
912                 u32 green:1;
913                 u32 flow_control:1;
914                 u32 ctap_short_off:1;
915         } ups_info;
916
917 #define RTL_VER_SIZE            32
918
919         struct rtl_fw {
920                 const char *fw_name;
921                 const struct firmware *fw;
922
923                 char version[RTL_VER_SIZE];
924                 int (*pre_fw)(struct r8152 *tp);
925                 int (*post_fw)(struct r8152 *tp);
926
927                 bool retry;
928         } rtl_fw;
929
930         atomic_t rx_count;
931
932         bool eee_en;
933         int intr_interval;
934         u32 saved_wolopts;
935         u32 msg_enable;
936         u32 tx_qlen;
937         u32 coalesce;
938         u32 advertising;
939         u32 rx_buf_sz;
940         u32 rx_copybreak;
941         u32 rx_pending;
942         u32 fc_pause_on, fc_pause_off;
943
944         unsigned int pipe_in, pipe_out, pipe_intr, pipe_ctrl_in, pipe_ctrl_out;
945
946         u32 support_2500full:1;
947         u32 lenovo_macpassthru:1;
948         u32 dell_tb_rx_agg_bug:1;
949         u16 ocp_base;
950         u16 speed;
951         u16 eee_adv;
952         u8 *intr_buff;
953         u8 version;
954         u8 duplex;
955         u8 autoneg;
956 };
957
958 /**
959  * struct fw_block - block type and total length
960  * @type: type of the current block, such as RTL_FW_END, RTL_FW_PLA,
961  *      RTL_FW_USB and so on.
962  * @length: total length of the current block.
963  */
964 struct fw_block {
965         __le32 type;
966         __le32 length;
967 } __packed;
968
969 /**
970  * struct fw_header - header of the firmware file
971  * @checksum: checksum of sha256 which is calculated from the whole file
972  *      except the checksum field of the file. That is, calculate sha256
973  *      from the version field to the end of the file.
974  * @version: version of this firmware.
975  * @blocks: the first firmware block of the file
976  */
977 struct fw_header {
978         u8 checksum[32];
979         char version[RTL_VER_SIZE];
980         struct fw_block blocks[];
981 } __packed;
982
983 enum rtl8152_fw_flags {
984         FW_FLAGS_USB = 0,
985         FW_FLAGS_PLA,
986         FW_FLAGS_START,
987         FW_FLAGS_STOP,
988         FW_FLAGS_NC,
989         FW_FLAGS_NC1,
990         FW_FLAGS_NC2,
991         FW_FLAGS_UC2,
992         FW_FLAGS_UC,
993         FW_FLAGS_SPEED_UP,
994         FW_FLAGS_VER,
995 };
996
997 enum rtl8152_fw_fixup_cmd {
998         FW_FIXUP_AND = 0,
999         FW_FIXUP_OR,
1000         FW_FIXUP_NOT,
1001         FW_FIXUP_XOR,
1002 };
1003
1004 struct fw_phy_set {
1005         __le16 addr;
1006         __le16 data;
1007 } __packed;
1008
1009 struct fw_phy_speed_up {
1010         struct fw_block blk_hdr;
1011         __le16 fw_offset;
1012         __le16 version;
1013         __le16 fw_reg;
1014         __le16 reserved;
1015         char info[];
1016 } __packed;
1017
1018 struct fw_phy_ver {
1019         struct fw_block blk_hdr;
1020         struct fw_phy_set ver;
1021         __le32 reserved;
1022 } __packed;
1023
1024 struct fw_phy_fixup {
1025         struct fw_block blk_hdr;
1026         struct fw_phy_set setting;
1027         __le16 bit_cmd;
1028         __le16 reserved;
1029 } __packed;
1030
1031 struct fw_phy_union {
1032         struct fw_block blk_hdr;
1033         __le16 fw_offset;
1034         __le16 fw_reg;
1035         struct fw_phy_set pre_set[2];
1036         struct fw_phy_set bp[8];
1037         struct fw_phy_set bp_en;
1038         u8 pre_num;
1039         u8 bp_num;
1040         char info[];
1041 } __packed;
1042
1043 /**
1044  * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
1045  *      The layout of the firmware block is:
1046  *      <struct fw_mac> + <info> + <firmware data>.
1047  * @blk_hdr: firmware descriptor (type, length)
1048  * @fw_offset: offset of the firmware binary data. The start address of
1049  *      the data would be the address of struct fw_mac + @fw_offset.
1050  * @fw_reg: the register to load the firmware. Depends on chip.
1051  * @bp_ba_addr: the register to write break point base address. Depends on
1052  *      chip.
1053  * @bp_ba_value: break point base address. Depends on chip.
1054  * @bp_en_addr: the register to write break point enabled mask. Depends
1055  *      on chip.
1056  * @bp_en_value: break point enabled mask. Depends on the firmware.
1057  * @bp_start: the start register of break points. Depends on chip.
1058  * @bp_num: the break point number which needs to be set for this firmware.
1059  *      Depends on the firmware.
1060  * @bp: break points. Depends on firmware.
1061  * @reserved: reserved space (unused)
1062  * @fw_ver_reg: the register to store the fw version.
1063  * @fw_ver_data: the firmware version of the current type.
1064  * @info: additional information for debugging, and is followed by the
1065  *      binary data of firmware.
1066  */
1067 struct fw_mac {
1068         struct fw_block blk_hdr;
1069         __le16 fw_offset;
1070         __le16 fw_reg;
1071         __le16 bp_ba_addr;
1072         __le16 bp_ba_value;
1073         __le16 bp_en_addr;
1074         __le16 bp_en_value;
1075         __le16 bp_start;
1076         __le16 bp_num;
1077         __le16 bp[16]; /* any value determined by firmware */
1078         __le32 reserved;
1079         __le16 fw_ver_reg;
1080         u8 fw_ver_data;
1081         char info[];
1082 } __packed;
1083
1084 /**
1085  * struct fw_phy_patch_key - a firmware block used by RTL_FW_PHY_START.
1086  *      This is used to set patch key when loading the firmware of PHY.
1087  * @blk_hdr: firmware descriptor (type, length)
1088  * @key_reg: the register to write the patch key.
1089  * @key_data: patch key.
1090  * @reserved: reserved space (unused)
1091  */
1092 struct fw_phy_patch_key {
1093         struct fw_block blk_hdr;
1094         __le16 key_reg;
1095         __le16 key_data;
1096         __le32 reserved;
1097 } __packed;
1098
1099 /**
1100  * struct fw_phy_nc - a firmware block used by RTL_FW_PHY_NC.
1101  *      The layout of the firmware block is:
1102  *      <struct fw_phy_nc> + <info> + <firmware data>.
1103  * @blk_hdr: firmware descriptor (type, length)
1104  * @fw_offset: offset of the firmware binary data. The start address of
1105  *      the data would be the address of struct fw_phy_nc + @fw_offset.
1106  * @fw_reg: the register to load the firmware. Depends on chip.
1107  * @ba_reg: the register to write the base address. Depends on chip.
1108  * @ba_data: base address. Depends on chip.
1109  * @patch_en_addr: the register of enabling patch mode. Depends on chip.
1110  * @patch_en_value: patch mode enabled mask. Depends on the firmware.
1111  * @mode_reg: the regitster of switching the mode.
1112  * @mode_pre: the mode needing to be set before loading the firmware.
1113  * @mode_post: the mode to be set when finishing to load the firmware.
1114  * @reserved: reserved space (unused)
1115  * @bp_start: the start register of break points. Depends on chip.
1116  * @bp_num: the break point number which needs to be set for this firmware.
1117  *      Depends on the firmware.
1118  * @bp: break points. Depends on firmware.
1119  * @info: additional information for debugging, and is followed by the
1120  *      binary data of firmware.
1121  */
1122 struct fw_phy_nc {
1123         struct fw_block blk_hdr;
1124         __le16 fw_offset;
1125         __le16 fw_reg;
1126         __le16 ba_reg;
1127         __le16 ba_data;
1128         __le16 patch_en_addr;
1129         __le16 patch_en_value;
1130         __le16 mode_reg;
1131         __le16 mode_pre;
1132         __le16 mode_post;
1133         __le16 reserved;
1134         __le16 bp_start;
1135         __le16 bp_num;
1136         __le16 bp[4];
1137         char info[];
1138 } __packed;
1139
1140 enum rtl_fw_type {
1141         RTL_FW_END = 0,
1142         RTL_FW_PLA,
1143         RTL_FW_USB,
1144         RTL_FW_PHY_START,
1145         RTL_FW_PHY_STOP,
1146         RTL_FW_PHY_NC,
1147         RTL_FW_PHY_FIXUP,
1148         RTL_FW_PHY_UNION_NC,
1149         RTL_FW_PHY_UNION_NC1,
1150         RTL_FW_PHY_UNION_NC2,
1151         RTL_FW_PHY_UNION_UC2,
1152         RTL_FW_PHY_UNION_UC,
1153         RTL_FW_PHY_UNION_MISC,
1154         RTL_FW_PHY_SPEED_UP,
1155         RTL_FW_PHY_VER,
1156 };
1157
1158 enum rtl_version {
1159         RTL_VER_UNKNOWN = 0,
1160         RTL_VER_01,
1161         RTL_VER_02,
1162         RTL_VER_03,
1163         RTL_VER_04,
1164         RTL_VER_05,
1165         RTL_VER_06,
1166         RTL_VER_07,
1167         RTL_VER_08,
1168         RTL_VER_09,
1169
1170         RTL_TEST_01,
1171         RTL_VER_10,
1172         RTL_VER_11,
1173         RTL_VER_12,
1174         RTL_VER_13,
1175         RTL_VER_14,
1176         RTL_VER_15,
1177
1178         RTL_VER_MAX
1179 };
1180
1181 enum tx_csum_stat {
1182         TX_CSUM_SUCCESS = 0,
1183         TX_CSUM_TSO,
1184         TX_CSUM_NONE
1185 };
1186
1187 #define RTL_ADVERTISED_10_HALF                  BIT(0)
1188 #define RTL_ADVERTISED_10_FULL                  BIT(1)
1189 #define RTL_ADVERTISED_100_HALF                 BIT(2)
1190 #define RTL_ADVERTISED_100_FULL                 BIT(3)
1191 #define RTL_ADVERTISED_1000_HALF                BIT(4)
1192 #define RTL_ADVERTISED_1000_FULL                BIT(5)
1193 #define RTL_ADVERTISED_2500_FULL                BIT(6)
1194
1195 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
1196  * The RTL chips use a 64 element hash table based on the Ethernet CRC.
1197  */
1198 static const int multicast_filter_limit = 32;
1199 static unsigned int agg_buf_sz = 16384;
1200
1201 #define RTL_LIMITED_TSO_SIZE    (size_to_mtu(agg_buf_sz) - sizeof(struct tx_desc))
1202
1203 static
1204 int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
1205 {
1206         int ret;
1207         void *tmp;
1208
1209         tmp = kmalloc(size, GFP_KERNEL);
1210         if (!tmp)
1211                 return -ENOMEM;
1212
1213         ret = usb_control_msg(tp->udev, tp->pipe_ctrl_in,
1214                               RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
1215                               value, index, tmp, size, 500);
1216         if (ret < 0)
1217                 memset(data, 0xff, size);
1218         else
1219                 memcpy(data, tmp, size);
1220
1221         kfree(tmp);
1222
1223         return ret;
1224 }
1225
1226 static
1227 int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
1228 {
1229         int ret;
1230         void *tmp;
1231
1232         tmp = kmemdup(data, size, GFP_KERNEL);
1233         if (!tmp)
1234                 return -ENOMEM;
1235
1236         ret = usb_control_msg(tp->udev, tp->pipe_ctrl_out,
1237                               RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE,
1238                               value, index, tmp, size, 500);
1239
1240         kfree(tmp);
1241
1242         return ret;
1243 }
1244
1245 static void rtl_set_unplug(struct r8152 *tp)
1246 {
1247         if (tp->udev->state == USB_STATE_NOTATTACHED) {
1248                 set_bit(RTL8152_UNPLUG, &tp->flags);
1249                 smp_mb__after_atomic();
1250         }
1251 }
1252
1253 static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
1254                             void *data, u16 type)
1255 {
1256         u16 limit = 64;
1257         int ret = 0;
1258
1259         if (test_bit(RTL8152_UNPLUG, &tp->flags))
1260                 return -ENODEV;
1261
1262         /* both size and indix must be 4 bytes align */
1263         if ((size & 3) || !size || (index & 3) || !data)
1264                 return -EPERM;
1265
1266         if ((u32)index + (u32)size > 0xffff)
1267                 return -EPERM;
1268
1269         while (size) {
1270                 if (size > limit) {
1271                         ret = get_registers(tp, index, type, limit, data);
1272                         if (ret < 0)
1273                                 break;
1274
1275                         index += limit;
1276                         data += limit;
1277                         size -= limit;
1278                 } else {
1279                         ret = get_registers(tp, index, type, size, data);
1280                         if (ret < 0)
1281                                 break;
1282
1283                         index += size;
1284                         data += size;
1285                         size = 0;
1286                         break;
1287                 }
1288         }
1289
1290         if (ret == -ENODEV)
1291                 rtl_set_unplug(tp);
1292
1293         return ret;
1294 }
1295
1296 static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
1297                              u16 size, void *data, u16 type)
1298 {
1299         int ret;
1300         u16 byteen_start, byteen_end, byen;
1301         u16 limit = 512;
1302
1303         if (test_bit(RTL8152_UNPLUG, &tp->flags))
1304                 return -ENODEV;
1305
1306         /* both size and indix must be 4 bytes align */
1307         if ((size & 3) || !size || (index & 3) || !data)
1308                 return -EPERM;
1309
1310         if ((u32)index + (u32)size > 0xffff)
1311                 return -EPERM;
1312
1313         byteen_start = byteen & BYTE_EN_START_MASK;
1314         byteen_end = byteen & BYTE_EN_END_MASK;
1315
1316         byen = byteen_start | (byteen_start << 4);
1317
1318         /* Split the first DWORD if the byte_en is not 0xff */
1319         if (byen != BYTE_EN_DWORD) {
1320                 ret = set_registers(tp, index, type | byen, 4, data);
1321                 if (ret < 0)
1322                         goto error1;
1323
1324                 index += 4;
1325                 data += 4;
1326                 size -= 4;
1327         }
1328
1329         if (size) {
1330                 byen = byteen_end | (byteen_end >> 4);
1331
1332                 /* Split the last DWORD if the byte_en is not 0xff */
1333                 if (byen != BYTE_EN_DWORD)
1334                         size -= 4;
1335
1336                 while (size) {
1337                         if (size > limit) {
1338                                 ret = set_registers(tp, index,
1339                                                     type | BYTE_EN_DWORD,
1340                                                     limit, data);
1341                                 if (ret < 0)
1342                                         goto error1;
1343
1344                                 index += limit;
1345                                 data += limit;
1346                                 size -= limit;
1347                         } else {
1348                                 ret = set_registers(tp, index,
1349                                                     type | BYTE_EN_DWORD,
1350                                                     size, data);
1351                                 if (ret < 0)
1352                                         goto error1;
1353
1354                                 index += size;
1355                                 data += size;
1356                                 size = 0;
1357                                 break;
1358                         }
1359                 }
1360
1361                 /* Set the last DWORD */
1362                 if (byen != BYTE_EN_DWORD)
1363                         ret = set_registers(tp, index, type | byen, 4, data);
1364         }
1365
1366 error1:
1367         if (ret == -ENODEV)
1368                 rtl_set_unplug(tp);
1369
1370         return ret;
1371 }
1372
1373 static inline
1374 int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
1375 {
1376         return generic_ocp_read(tp, index, size, data, MCU_TYPE_PLA);
1377 }
1378
1379 static inline
1380 int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
1381 {
1382         return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_PLA);
1383 }
1384
1385 static inline
1386 int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
1387 {
1388         return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB);
1389 }
1390
1391 static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index)
1392 {
1393         __le32 data;
1394
1395         generic_ocp_read(tp, index, sizeof(data), &data, type);
1396
1397         return __le32_to_cpu(data);
1398 }
1399
1400 static void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data)
1401 {
1402         __le32 tmp = __cpu_to_le32(data);
1403
1404         generic_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(tmp), &tmp, type);
1405 }
1406
1407 static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
1408 {
1409         u32 data;
1410         __le32 tmp;
1411         u16 byen = BYTE_EN_WORD;
1412         u8 shift = index & 2;
1413
1414         index &= ~3;
1415         byen <<= shift;
1416
1417         generic_ocp_read(tp, index, sizeof(tmp), &tmp, type | byen);
1418
1419         data = __le32_to_cpu(tmp);
1420         data >>= (shift * 8);
1421         data &= 0xffff;
1422
1423         return (u16)data;
1424 }
1425
1426 static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data)
1427 {
1428         u32 mask = 0xffff;
1429         __le32 tmp;
1430         u16 byen = BYTE_EN_WORD;
1431         u8 shift = index & 2;
1432
1433         data &= mask;
1434
1435         if (index & 2) {
1436                 byen <<= shift;
1437                 mask <<= (shift * 8);
1438                 data <<= (shift * 8);
1439                 index &= ~3;
1440         }
1441
1442         tmp = __cpu_to_le32(data);
1443
1444         generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
1445 }
1446
1447 static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index)
1448 {
1449         u32 data;
1450         __le32 tmp;
1451         u8 shift = index & 3;
1452
1453         index &= ~3;
1454
1455         generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
1456
1457         data = __le32_to_cpu(tmp);
1458         data >>= (shift * 8);
1459         data &= 0xff;
1460
1461         return (u8)data;
1462 }
1463
1464 static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
1465 {
1466         u32 mask = 0xff;
1467         __le32 tmp;
1468         u16 byen = BYTE_EN_BYTE;
1469         u8 shift = index & 3;
1470
1471         data &= mask;
1472
1473         if (index & 3) {
1474                 byen <<= shift;
1475                 mask <<= (shift * 8);
1476                 data <<= (shift * 8);
1477                 index &= ~3;
1478         }
1479
1480         tmp = __cpu_to_le32(data);
1481
1482         generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
1483 }
1484
1485 static u16 ocp_reg_read(struct r8152 *tp, u16 addr)
1486 {
1487         u16 ocp_base, ocp_index;
1488
1489         ocp_base = addr & 0xf000;
1490         if (ocp_base != tp->ocp_base) {
1491                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
1492                 tp->ocp_base = ocp_base;
1493         }
1494
1495         ocp_index = (addr & 0x0fff) | 0xb000;
1496         return ocp_read_word(tp, MCU_TYPE_PLA, ocp_index);
1497 }
1498
1499 static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
1500 {
1501         u16 ocp_base, ocp_index;
1502
1503         ocp_base = addr & 0xf000;
1504         if (ocp_base != tp->ocp_base) {
1505                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
1506                 tp->ocp_base = ocp_base;
1507         }
1508
1509         ocp_index = (addr & 0x0fff) | 0xb000;
1510         ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data);
1511 }
1512
1513 static inline void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value)
1514 {
1515         ocp_reg_write(tp, OCP_BASE_MII + reg_addr * 2, value);
1516 }
1517
1518 static inline int r8152_mdio_read(struct r8152 *tp, u32 reg_addr)
1519 {
1520         return ocp_reg_read(tp, OCP_BASE_MII + reg_addr * 2);
1521 }
1522
1523 static void sram_write(struct r8152 *tp, u16 addr, u16 data)
1524 {
1525         ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
1526         ocp_reg_write(tp, OCP_SRAM_DATA, data);
1527 }
1528
1529 static u16 sram_read(struct r8152 *tp, u16 addr)
1530 {
1531         ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
1532         return ocp_reg_read(tp, OCP_SRAM_DATA);
1533 }
1534
1535 static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
1536 {
1537         struct r8152 *tp = netdev_priv(netdev);
1538         int ret;
1539
1540         if (test_bit(RTL8152_UNPLUG, &tp->flags))
1541                 return -ENODEV;
1542
1543         if (phy_id != R8152_PHY_ID)
1544                 return -EINVAL;
1545
1546         ret = r8152_mdio_read(tp, reg);
1547
1548         return ret;
1549 }
1550
1551 static
1552 void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
1553 {
1554         struct r8152 *tp = netdev_priv(netdev);
1555
1556         if (test_bit(RTL8152_UNPLUG, &tp->flags))
1557                 return;
1558
1559         if (phy_id != R8152_PHY_ID)
1560                 return;
1561
1562         r8152_mdio_write(tp, reg, val);
1563 }
1564
1565 static int
1566 r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
1567
1568 static int
1569 rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
1570                   u32 advertising);
1571
1572 static int __rtl8152_set_mac_address(struct net_device *netdev, void *p,
1573                                      bool in_resume)
1574 {
1575         struct r8152 *tp = netdev_priv(netdev);
1576         struct sockaddr *addr = p;
1577         int ret = -EADDRNOTAVAIL;
1578
1579         if (!is_valid_ether_addr(addr->sa_data))
1580                 goto out1;
1581
1582         if (!in_resume) {
1583                 ret = usb_autopm_get_interface(tp->intf);
1584                 if (ret < 0)
1585                         goto out1;
1586         }
1587
1588         mutex_lock(&tp->control);
1589
1590         eth_hw_addr_set(netdev, addr->sa_data);
1591
1592         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
1593         pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data);
1594         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
1595
1596         mutex_unlock(&tp->control);
1597
1598         if (!in_resume)
1599                 usb_autopm_put_interface(tp->intf);
1600 out1:
1601         return ret;
1602 }
1603
1604 static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
1605 {
1606         return __rtl8152_set_mac_address(netdev, p, false);
1607 }
1608
1609 /* Devices containing proper chips can support a persistent
1610  * host system provided MAC address.
1611  * Examples of this are Dell TB15 and Dell WD15 docks
1612  */
1613 static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
1614 {
1615         acpi_status status;
1616         struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
1617         union acpi_object *obj;
1618         int ret = -EINVAL;
1619         u32 ocp_data;
1620         unsigned char buf[6];
1621         char *mac_obj_name;
1622         acpi_object_type mac_obj_type;
1623         int mac_strlen;
1624
1625         if (tp->lenovo_macpassthru) {
1626                 mac_obj_name = "\\MACA";
1627                 mac_obj_type = ACPI_TYPE_STRING;
1628                 mac_strlen = 0x16;
1629         } else {
1630                 /* test for -AD variant of RTL8153 */
1631                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
1632                 if ((ocp_data & AD_MASK) == 0x1000) {
1633                         /* test for MAC address pass-through bit */
1634                         ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
1635                         if ((ocp_data & PASS_THRU_MASK) != 1) {
1636                                 netif_dbg(tp, probe, tp->netdev,
1637                                                 "No efuse for RTL8153-AD MAC pass through\n");
1638                                 return -ENODEV;
1639                         }
1640                 } else {
1641                         /* test for RTL8153-BND and RTL8153-BD */
1642                         ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
1643                         if ((ocp_data & BND_MASK) == 0 && (ocp_data & BD_MASK) == 0) {
1644                                 netif_dbg(tp, probe, tp->netdev,
1645                                                 "Invalid variant for MAC pass through\n");
1646                                 return -ENODEV;
1647                         }
1648                 }
1649
1650                 mac_obj_name = "\\_SB.AMAC";
1651                 mac_obj_type = ACPI_TYPE_BUFFER;
1652                 mac_strlen = 0x17;
1653         }
1654
1655         /* returns _AUXMAC_#AABBCCDDEEFF# */
1656         status = acpi_evaluate_object(NULL, mac_obj_name, NULL, &buffer);
1657         obj = (union acpi_object *)buffer.pointer;
1658         if (!ACPI_SUCCESS(status))
1659                 return -ENODEV;
1660         if (obj->type != mac_obj_type || obj->string.length != mac_strlen) {
1661                 netif_warn(tp, probe, tp->netdev,
1662                            "Invalid buffer for pass-thru MAC addr: (%d, %d)\n",
1663                            obj->type, obj->string.length);
1664                 goto amacout;
1665         }
1666
1667         if (strncmp(obj->string.pointer, "_AUXMAC_#", 9) != 0 ||
1668             strncmp(obj->string.pointer + 0x15, "#", 1) != 0) {
1669                 netif_warn(tp, probe, tp->netdev,
1670                            "Invalid header when reading pass-thru MAC addr\n");
1671                 goto amacout;
1672         }
1673         ret = hex2bin(buf, obj->string.pointer + 9, 6);
1674         if (!(ret == 0 && is_valid_ether_addr(buf))) {
1675                 netif_warn(tp, probe, tp->netdev,
1676                            "Invalid MAC for pass-thru MAC addr: %d, %pM\n",
1677                            ret, buf);
1678                 ret = -EINVAL;
1679                 goto amacout;
1680         }
1681         memcpy(sa->sa_data, buf, 6);
1682         netif_info(tp, probe, tp->netdev,
1683                    "Using pass-thru MAC addr %pM\n", sa->sa_data);
1684
1685 amacout:
1686         kfree(obj);
1687         return ret;
1688 }
1689
1690 static int determine_ethernet_addr(struct r8152 *tp, struct sockaddr *sa)
1691 {
1692         struct net_device *dev = tp->netdev;
1693         int ret;
1694
1695         sa->sa_family = dev->type;
1696
1697         ret = eth_platform_get_mac_address(&tp->udev->dev, sa->sa_data);
1698         if (ret < 0) {
1699                 if (tp->version == RTL_VER_01) {
1700                         ret = pla_ocp_read(tp, PLA_IDR, 8, sa->sa_data);
1701                 } else {
1702                         /* if device doesn't support MAC pass through this will
1703                          * be expected to be non-zero
1704                          */
1705                         ret = vendor_mac_passthru_addr_read(tp, sa);
1706                         if (ret < 0)
1707                                 ret = pla_ocp_read(tp, PLA_BACKUP, 8,
1708                                                    sa->sa_data);
1709                 }
1710         }
1711
1712         if (ret < 0) {
1713                 netif_err(tp, probe, dev, "Get ether addr fail\n");
1714         } else if (!is_valid_ether_addr(sa->sa_data)) {
1715                 netif_err(tp, probe, dev, "Invalid ether addr %pM\n",
1716                           sa->sa_data);
1717                 eth_hw_addr_random(dev);
1718                 ether_addr_copy(sa->sa_data, dev->dev_addr);
1719                 netif_info(tp, probe, dev, "Random ether addr %pM\n",
1720                            sa->sa_data);
1721                 return 0;
1722         }
1723
1724         return ret;
1725 }
1726
1727 static int set_ethernet_addr(struct r8152 *tp, bool in_resume)
1728 {
1729         struct net_device *dev = tp->netdev;
1730         struct sockaddr sa;
1731         int ret;
1732
1733         ret = determine_ethernet_addr(tp, &sa);
1734         if (ret < 0)
1735                 return ret;
1736
1737         if (tp->version == RTL_VER_01)
1738                 eth_hw_addr_set(dev, sa.sa_data);
1739         else
1740                 ret = __rtl8152_set_mac_address(dev, &sa, in_resume);
1741
1742         return ret;
1743 }
1744
1745 static void read_bulk_callback(struct urb *urb)
1746 {
1747         struct net_device *netdev;
1748         int status = urb->status;
1749         struct rx_agg *agg;
1750         struct r8152 *tp;
1751         unsigned long flags;
1752
1753         agg = urb->context;
1754         if (!agg)
1755                 return;
1756
1757         tp = agg->context;
1758         if (!tp)
1759                 return;
1760
1761         if (test_bit(RTL8152_UNPLUG, &tp->flags))
1762                 return;
1763
1764         if (!test_bit(WORK_ENABLE, &tp->flags))
1765                 return;
1766
1767         netdev = tp->netdev;
1768
1769         /* When link down, the driver would cancel all bulks. */
1770         /* This avoid the re-submitting bulk */
1771         if (!netif_carrier_ok(netdev))
1772                 return;
1773
1774         usb_mark_last_busy(tp->udev);
1775
1776         switch (status) {
1777         case 0:
1778                 if (urb->actual_length < ETH_ZLEN)
1779                         break;
1780
1781                 spin_lock_irqsave(&tp->rx_lock, flags);
1782                 list_add_tail(&agg->list, &tp->rx_done);
1783                 spin_unlock_irqrestore(&tp->rx_lock, flags);
1784                 napi_schedule(&tp->napi);
1785                 return;
1786         case -ESHUTDOWN:
1787                 rtl_set_unplug(tp);
1788                 netif_device_detach(tp->netdev);
1789                 return;
1790         case -EPROTO:
1791                 urb->actual_length = 0;
1792                 spin_lock_irqsave(&tp->rx_lock, flags);
1793                 list_add_tail(&agg->list, &tp->rx_done);
1794                 spin_unlock_irqrestore(&tp->rx_lock, flags);
1795                 set_bit(RX_EPROTO, &tp->flags);
1796                 schedule_delayed_work(&tp->schedule, 1);
1797                 return;
1798         case -ENOENT:
1799                 return; /* the urb is in unlink state */
1800         case -ETIME:
1801                 if (net_ratelimit())
1802                         netdev_warn(netdev, "maybe reset is needed?\n");
1803                 break;
1804         default:
1805                 if (net_ratelimit())
1806                         netdev_warn(netdev, "Rx status %d\n", status);
1807                 break;
1808         }
1809
1810         r8152_submit_rx(tp, agg, GFP_ATOMIC);
1811 }
1812
1813 static void write_bulk_callback(struct urb *urb)
1814 {
1815         struct net_device_stats *stats;
1816         struct net_device *netdev;
1817         struct tx_agg *agg;
1818         struct r8152 *tp;
1819         unsigned long flags;
1820         int status = urb->status;
1821
1822         agg = urb->context;
1823         if (!agg)
1824                 return;
1825
1826         tp = agg->context;
1827         if (!tp)
1828                 return;
1829
1830         netdev = tp->netdev;
1831         stats = &netdev->stats;
1832         if (status) {
1833                 if (net_ratelimit())
1834                         netdev_warn(netdev, "Tx status %d\n", status);
1835                 stats->tx_errors += agg->skb_num;
1836         } else {
1837                 stats->tx_packets += agg->skb_num;
1838                 stats->tx_bytes += agg->skb_len;
1839         }
1840
1841         spin_lock_irqsave(&tp->tx_lock, flags);
1842         list_add_tail(&agg->list, &tp->tx_free);
1843         spin_unlock_irqrestore(&tp->tx_lock, flags);
1844
1845         usb_autopm_put_interface_async(tp->intf);
1846
1847         if (!netif_carrier_ok(netdev))
1848                 return;
1849
1850         if (!test_bit(WORK_ENABLE, &tp->flags))
1851                 return;
1852
1853         if (test_bit(RTL8152_UNPLUG, &tp->flags))
1854                 return;
1855
1856         if (!skb_queue_empty(&tp->tx_queue))
1857                 tasklet_schedule(&tp->tx_tl);
1858 }
1859
1860 static void intr_callback(struct urb *urb)
1861 {
1862         struct r8152 *tp;
1863         __le16 *d;
1864         int status = urb->status;
1865         int res;
1866
1867         tp = urb->context;
1868         if (!tp)
1869                 return;
1870
1871         if (!test_bit(WORK_ENABLE, &tp->flags))
1872                 return;
1873
1874         if (test_bit(RTL8152_UNPLUG, &tp->flags))
1875                 return;
1876
1877         switch (status) {
1878         case 0:                 /* success */
1879                 break;
1880         case -ECONNRESET:       /* unlink */
1881         case -ESHUTDOWN:
1882                 netif_device_detach(tp->netdev);
1883                 fallthrough;
1884         case -ENOENT:
1885         case -EPROTO:
1886                 netif_info(tp, intr, tp->netdev,
1887                            "Stop submitting intr, status %d\n", status);
1888                 return;
1889         case -EOVERFLOW:
1890                 if (net_ratelimit())
1891                         netif_info(tp, intr, tp->netdev,
1892                                    "intr status -EOVERFLOW\n");
1893                 goto resubmit;
1894         /* -EPIPE:  should clear the halt */
1895         default:
1896                 netif_info(tp, intr, tp->netdev, "intr status %d\n", status);
1897                 goto resubmit;
1898         }
1899
1900         d = urb->transfer_buffer;
1901         if (INTR_LINK & __le16_to_cpu(d[0])) {
1902                 if (!netif_carrier_ok(tp->netdev)) {
1903                         set_bit(RTL8152_LINK_CHG, &tp->flags);
1904                         schedule_delayed_work(&tp->schedule, 0);
1905                 }
1906         } else {
1907                 if (netif_carrier_ok(tp->netdev)) {
1908                         netif_stop_queue(tp->netdev);
1909                         set_bit(RTL8152_LINK_CHG, &tp->flags);
1910                         schedule_delayed_work(&tp->schedule, 0);
1911                 }
1912         }
1913
1914 resubmit:
1915         res = usb_submit_urb(urb, GFP_ATOMIC);
1916         if (res == -ENODEV) {
1917                 rtl_set_unplug(tp);
1918                 netif_device_detach(tp->netdev);
1919         } else if (res) {
1920                 netif_err(tp, intr, tp->netdev,
1921                           "can't resubmit intr, status %d\n", res);
1922         }
1923 }
1924
1925 static inline void *rx_agg_align(void *data)
1926 {
1927         return (void *)ALIGN((uintptr_t)data, RX_ALIGN);
1928 }
1929
1930 static inline void *tx_agg_align(void *data)
1931 {
1932         return (void *)ALIGN((uintptr_t)data, TX_ALIGN);
1933 }
1934
1935 static void free_rx_agg(struct r8152 *tp, struct rx_agg *agg)
1936 {
1937         list_del(&agg->info_list);
1938
1939         usb_free_urb(agg->urb);
1940         put_page(agg->page);
1941         kfree(agg);
1942
1943         atomic_dec(&tp->rx_count);
1944 }
1945
1946 static struct rx_agg *alloc_rx_agg(struct r8152 *tp, gfp_t mflags)
1947 {
1948         struct net_device *netdev = tp->netdev;
1949         int node = netdev->dev.parent ? dev_to_node(netdev->dev.parent) : -1;
1950         unsigned int order = get_order(tp->rx_buf_sz);
1951         struct rx_agg *rx_agg;
1952         unsigned long flags;
1953
1954         rx_agg = kmalloc_node(sizeof(*rx_agg), mflags, node);
1955         if (!rx_agg)
1956                 return NULL;
1957
1958         rx_agg->page = alloc_pages(mflags | __GFP_COMP | __GFP_NOWARN, order);
1959         if (!rx_agg->page)
1960                 goto free_rx;
1961
1962         rx_agg->buffer = page_address(rx_agg->page);
1963
1964         rx_agg->urb = usb_alloc_urb(0, mflags);
1965         if (!rx_agg->urb)
1966                 goto free_buf;
1967
1968         rx_agg->context = tp;
1969
1970         INIT_LIST_HEAD(&rx_agg->list);
1971         INIT_LIST_HEAD(&rx_agg->info_list);
1972         spin_lock_irqsave(&tp->rx_lock, flags);
1973         list_add_tail(&rx_agg->info_list, &tp->rx_info);
1974         spin_unlock_irqrestore(&tp->rx_lock, flags);
1975
1976         atomic_inc(&tp->rx_count);
1977
1978         return rx_agg;
1979
1980 free_buf:
1981         __free_pages(rx_agg->page, order);
1982 free_rx:
1983         kfree(rx_agg);
1984         return NULL;
1985 }
1986
1987 static void free_all_mem(struct r8152 *tp)
1988 {
1989         struct rx_agg *agg, *agg_next;
1990         unsigned long flags;
1991         int i;
1992
1993         spin_lock_irqsave(&tp->rx_lock, flags);
1994
1995         list_for_each_entry_safe(agg, agg_next, &tp->rx_info, info_list)
1996                 free_rx_agg(tp, agg);
1997
1998         spin_unlock_irqrestore(&tp->rx_lock, flags);
1999
2000         WARN_ON(atomic_read(&tp->rx_count));
2001
2002         for (i = 0; i < RTL8152_MAX_TX; i++) {
2003                 usb_free_urb(tp->tx_info[i].urb);
2004                 tp->tx_info[i].urb = NULL;
2005
2006                 kfree(tp->tx_info[i].buffer);
2007                 tp->tx_info[i].buffer = NULL;
2008                 tp->tx_info[i].head = NULL;
2009         }
2010
2011         usb_free_urb(tp->intr_urb);
2012         tp->intr_urb = NULL;
2013
2014         kfree(tp->intr_buff);
2015         tp->intr_buff = NULL;
2016 }
2017
2018 static int alloc_all_mem(struct r8152 *tp)
2019 {
2020         struct net_device *netdev = tp->netdev;
2021         struct usb_interface *intf = tp->intf;
2022         struct usb_host_interface *alt = intf->cur_altsetting;
2023         struct usb_host_endpoint *ep_intr = alt->endpoint + 2;
2024         int node, i;
2025
2026         node = netdev->dev.parent ? dev_to_node(netdev->dev.parent) : -1;
2027
2028         spin_lock_init(&tp->rx_lock);
2029         spin_lock_init(&tp->tx_lock);
2030         INIT_LIST_HEAD(&tp->rx_info);
2031         INIT_LIST_HEAD(&tp->tx_free);
2032         INIT_LIST_HEAD(&tp->rx_done);
2033         skb_queue_head_init(&tp->tx_queue);
2034         skb_queue_head_init(&tp->rx_queue);
2035         atomic_set(&tp->rx_count, 0);
2036
2037         for (i = 0; i < RTL8152_MAX_RX; i++) {
2038                 if (!alloc_rx_agg(tp, GFP_KERNEL))
2039                         goto err1;
2040         }
2041
2042         for (i = 0; i < RTL8152_MAX_TX; i++) {
2043                 struct urb *urb;
2044                 u8 *buf;
2045
2046                 buf = kmalloc_node(agg_buf_sz, GFP_KERNEL, node);
2047                 if (!buf)
2048                         goto err1;
2049
2050                 if (buf != tx_agg_align(buf)) {
2051                         kfree(buf);
2052                         buf = kmalloc_node(agg_buf_sz + TX_ALIGN, GFP_KERNEL,
2053                                            node);
2054                         if (!buf)
2055                                 goto err1;
2056                 }
2057
2058                 urb = usb_alloc_urb(0, GFP_KERNEL);
2059                 if (!urb) {
2060                         kfree(buf);
2061                         goto err1;
2062                 }
2063
2064                 INIT_LIST_HEAD(&tp->tx_info[i].list);
2065                 tp->tx_info[i].context = tp;
2066                 tp->tx_info[i].urb = urb;
2067                 tp->tx_info[i].buffer = buf;
2068                 tp->tx_info[i].head = tx_agg_align(buf);
2069
2070                 list_add_tail(&tp->tx_info[i].list, &tp->tx_free);
2071         }
2072
2073         tp->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
2074         if (!tp->intr_urb)
2075                 goto err1;
2076
2077         tp->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
2078         if (!tp->intr_buff)
2079                 goto err1;
2080
2081         tp->intr_interval = (int)ep_intr->desc.bInterval;
2082         usb_fill_int_urb(tp->intr_urb, tp->udev, tp->pipe_intr,
2083                          tp->intr_buff, INTBUFSIZE, intr_callback,
2084                          tp, tp->intr_interval);
2085
2086         return 0;
2087
2088 err1:
2089         free_all_mem(tp);
2090         return -ENOMEM;
2091 }
2092
2093 static struct tx_agg *r8152_get_tx_agg(struct r8152 *tp)
2094 {
2095         struct tx_agg *agg = NULL;
2096         unsigned long flags;
2097
2098         if (list_empty(&tp->tx_free))
2099                 return NULL;
2100
2101         spin_lock_irqsave(&tp->tx_lock, flags);
2102         if (!list_empty(&tp->tx_free)) {
2103                 struct list_head *cursor;
2104
2105                 cursor = tp->tx_free.next;
2106                 list_del_init(cursor);
2107                 agg = list_entry(cursor, struct tx_agg, list);
2108         }
2109         spin_unlock_irqrestore(&tp->tx_lock, flags);
2110
2111         return agg;
2112 }
2113
2114 /* r8152_csum_workaround()
2115  * The hw limits the value of the transport offset. When the offset is out of
2116  * range, calculate the checksum by sw.
2117  */
2118 static void r8152_csum_workaround(struct r8152 *tp, struct sk_buff *skb,
2119                                   struct sk_buff_head *list)
2120 {
2121         if (skb_shinfo(skb)->gso_size) {
2122                 netdev_features_t features = tp->netdev->features;
2123                 struct sk_buff *segs, *seg, *next;
2124                 struct sk_buff_head seg_list;
2125
2126                 features &= ~(NETIF_F_SG | NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
2127                 segs = skb_gso_segment(skb, features);
2128                 if (IS_ERR(segs) || !segs)
2129                         goto drop;
2130
2131                 __skb_queue_head_init(&seg_list);
2132
2133                 skb_list_walk_safe(segs, seg, next) {
2134                         skb_mark_not_on_list(seg);
2135                         __skb_queue_tail(&seg_list, seg);
2136                 }
2137
2138                 skb_queue_splice(&seg_list, list);
2139                 dev_kfree_skb(skb);
2140         } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
2141                 if (skb_checksum_help(skb) < 0)
2142                         goto drop;
2143
2144                 __skb_queue_head(list, skb);
2145         } else {
2146                 struct net_device_stats *stats;
2147
2148 drop:
2149                 stats = &tp->netdev->stats;
2150                 stats->tx_dropped++;
2151                 dev_kfree_skb(skb);
2152         }
2153 }
2154
2155 static inline void rtl_tx_vlan_tag(struct tx_desc *desc, struct sk_buff *skb)
2156 {
2157         if (skb_vlan_tag_present(skb)) {
2158                 u32 opts2;
2159
2160                 opts2 = TX_VLAN_TAG | swab16(skb_vlan_tag_get(skb));
2161                 desc->opts2 |= cpu_to_le32(opts2);
2162         }
2163 }
2164
2165 static inline void rtl_rx_vlan_tag(struct rx_desc *desc, struct sk_buff *skb)
2166 {
2167         u32 opts2 = le32_to_cpu(desc->opts2);
2168
2169         if (opts2 & RX_VLAN_TAG)
2170                 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
2171                                        swab16(opts2 & 0xffff));
2172 }
2173
2174 static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
2175                          struct sk_buff *skb, u32 len)
2176 {
2177         u32 mss = skb_shinfo(skb)->gso_size;
2178         u32 opts1, opts2 = 0;
2179         int ret = TX_CSUM_SUCCESS;
2180
2181         WARN_ON_ONCE(len > TX_LEN_MAX);
2182
2183         opts1 = len | TX_FS | TX_LS;
2184
2185         if (mss) {
2186                 u32 transport_offset = (u32)skb_transport_offset(skb);
2187
2188                 if (transport_offset > GTTCPHO_MAX) {
2189                         netif_warn(tp, tx_err, tp->netdev,
2190                                    "Invalid transport offset 0x%x for TSO\n",
2191                                    transport_offset);
2192                         ret = TX_CSUM_TSO;
2193                         goto unavailable;
2194                 }
2195
2196                 switch (vlan_get_protocol(skb)) {
2197                 case htons(ETH_P_IP):
2198                         opts1 |= GTSENDV4;
2199                         break;
2200
2201                 case htons(ETH_P_IPV6):
2202                         if (skb_cow_head(skb, 0)) {
2203                                 ret = TX_CSUM_TSO;
2204                                 goto unavailable;
2205                         }
2206                         tcp_v6_gso_csum_prep(skb);
2207                         opts1 |= GTSENDV6;
2208                         break;
2209
2210                 default:
2211                         WARN_ON_ONCE(1);
2212                         break;
2213                 }
2214
2215                 opts1 |= transport_offset << GTTCPHO_SHIFT;
2216                 opts2 |= min(mss, MSS_MAX) << MSS_SHIFT;
2217         } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
2218                 u32 transport_offset = (u32)skb_transport_offset(skb);
2219                 u8 ip_protocol;
2220
2221                 if (transport_offset > TCPHO_MAX) {
2222                         netif_warn(tp, tx_err, tp->netdev,
2223                                    "Invalid transport offset 0x%x\n",
2224                                    transport_offset);
2225                         ret = TX_CSUM_NONE;
2226                         goto unavailable;
2227                 }
2228
2229                 switch (vlan_get_protocol(skb)) {
2230                 case htons(ETH_P_IP):
2231                         opts2 |= IPV4_CS;
2232                         ip_protocol = ip_hdr(skb)->protocol;
2233                         break;
2234
2235                 case htons(ETH_P_IPV6):
2236                         opts2 |= IPV6_CS;
2237                         ip_protocol = ipv6_hdr(skb)->nexthdr;
2238                         break;
2239
2240                 default:
2241                         ip_protocol = IPPROTO_RAW;
2242                         break;
2243                 }
2244
2245                 if (ip_protocol == IPPROTO_TCP)
2246                         opts2 |= TCP_CS;
2247                 else if (ip_protocol == IPPROTO_UDP)
2248                         opts2 |= UDP_CS;
2249                 else
2250                         WARN_ON_ONCE(1);
2251
2252                 opts2 |= transport_offset << TCPHO_SHIFT;
2253         }
2254
2255         desc->opts2 = cpu_to_le32(opts2);
2256         desc->opts1 = cpu_to_le32(opts1);
2257
2258 unavailable:
2259         return ret;
2260 }
2261
2262 static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
2263 {
2264         struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
2265         int remain, ret;
2266         u8 *tx_data;
2267
2268         __skb_queue_head_init(&skb_head);
2269         spin_lock(&tx_queue->lock);
2270         skb_queue_splice_init(tx_queue, &skb_head);
2271         spin_unlock(&tx_queue->lock);
2272
2273         tx_data = agg->head;
2274         agg->skb_num = 0;
2275         agg->skb_len = 0;
2276         remain = agg_buf_sz;
2277
2278         while (remain >= ETH_ZLEN + sizeof(struct tx_desc)) {
2279                 struct tx_desc *tx_desc;
2280                 struct sk_buff *skb;
2281                 unsigned int len;
2282
2283                 skb = __skb_dequeue(&skb_head);
2284                 if (!skb)
2285                         break;
2286
2287                 len = skb->len + sizeof(*tx_desc);
2288
2289                 if (len > remain) {
2290                         __skb_queue_head(&skb_head, skb);
2291                         break;
2292                 }
2293
2294                 tx_data = tx_agg_align(tx_data);
2295                 tx_desc = (struct tx_desc *)tx_data;
2296
2297                 if (r8152_tx_csum(tp, tx_desc, skb, skb->len)) {
2298                         r8152_csum_workaround(tp, skb, &skb_head);
2299                         continue;
2300                 }
2301
2302                 rtl_tx_vlan_tag(tx_desc, skb);
2303
2304                 tx_data += sizeof(*tx_desc);
2305
2306                 len = skb->len;
2307                 if (skb_copy_bits(skb, 0, tx_data, len) < 0) {
2308                         struct net_device_stats *stats = &tp->netdev->stats;
2309
2310                         stats->tx_dropped++;
2311                         dev_kfree_skb_any(skb);
2312                         tx_data -= sizeof(*tx_desc);
2313                         continue;
2314                 }
2315
2316                 tx_data += len;
2317                 agg->skb_len += len;
2318                 agg->skb_num += skb_shinfo(skb)->gso_segs ?: 1;
2319
2320                 dev_kfree_skb_any(skb);
2321
2322                 remain = agg_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
2323
2324                 if (tp->dell_tb_rx_agg_bug)
2325                         break;
2326         }
2327
2328         if (!skb_queue_empty(&skb_head)) {
2329                 spin_lock(&tx_queue->lock);
2330                 skb_queue_splice(&skb_head, tx_queue);
2331                 spin_unlock(&tx_queue->lock);
2332         }
2333
2334         netif_tx_lock(tp->netdev);
2335
2336         if (netif_queue_stopped(tp->netdev) &&
2337             skb_queue_len(&tp->tx_queue) < tp->tx_qlen)
2338                 netif_wake_queue(tp->netdev);
2339
2340         netif_tx_unlock(tp->netdev);
2341
2342         ret = usb_autopm_get_interface_async(tp->intf);
2343         if (ret < 0)
2344                 goto out_tx_fill;
2345
2346         usb_fill_bulk_urb(agg->urb, tp->udev, tp->pipe_out,
2347                           agg->head, (int)(tx_data - (u8 *)agg->head),
2348                           (usb_complete_t)write_bulk_callback, agg);
2349
2350         ret = usb_submit_urb(agg->urb, GFP_ATOMIC);
2351         if (ret < 0)
2352                 usb_autopm_put_interface_async(tp->intf);
2353
2354 out_tx_fill:
2355         return ret;
2356 }
2357
2358 static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc)
2359 {
2360         u8 checksum = CHECKSUM_NONE;
2361         u32 opts2, opts3;
2362
2363         if (!(tp->netdev->features & NETIF_F_RXCSUM))
2364                 goto return_result;
2365
2366         opts2 = le32_to_cpu(rx_desc->opts2);
2367         opts3 = le32_to_cpu(rx_desc->opts3);
2368
2369         if (opts2 & RD_IPV4_CS) {
2370                 if (opts3 & IPF)
2371                         checksum = CHECKSUM_NONE;
2372                 else if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF))
2373                         checksum = CHECKSUM_UNNECESSARY;
2374                 else if ((opts2 & RD_TCP_CS) && !(opts3 & TCPF))
2375                         checksum = CHECKSUM_UNNECESSARY;
2376         } else if (opts2 & RD_IPV6_CS) {
2377                 if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF))
2378                         checksum = CHECKSUM_UNNECESSARY;
2379                 else if ((opts2 & RD_TCP_CS) && !(opts3 & TCPF))
2380                         checksum = CHECKSUM_UNNECESSARY;
2381         }
2382
2383 return_result:
2384         return checksum;
2385 }
2386
2387 static inline bool rx_count_exceed(struct r8152 *tp)
2388 {
2389         return atomic_read(&tp->rx_count) > RTL8152_MAX_RX;
2390 }
2391
2392 static inline int agg_offset(struct rx_agg *agg, void *addr)
2393 {
2394         return (int)(addr - agg->buffer);
2395 }
2396
2397 static struct rx_agg *rtl_get_free_rx(struct r8152 *tp, gfp_t mflags)
2398 {
2399         struct rx_agg *agg, *agg_next, *agg_free = NULL;
2400         unsigned long flags;
2401
2402         spin_lock_irqsave(&tp->rx_lock, flags);
2403
2404         list_for_each_entry_safe(agg, agg_next, &tp->rx_used, list) {
2405                 if (page_count(agg->page) == 1) {
2406                         if (!agg_free) {
2407                                 list_del_init(&agg->list);
2408                                 agg_free = agg;
2409                                 continue;
2410                         }
2411                         if (rx_count_exceed(tp)) {
2412                                 list_del_init(&agg->list);
2413                                 free_rx_agg(tp, agg);
2414                         }
2415                         break;
2416                 }
2417         }
2418
2419         spin_unlock_irqrestore(&tp->rx_lock, flags);
2420
2421         if (!agg_free && atomic_read(&tp->rx_count) < tp->rx_pending)
2422                 agg_free = alloc_rx_agg(tp, mflags);
2423
2424         return agg_free;
2425 }
2426
2427 static int rx_bottom(struct r8152 *tp, int budget)
2428 {
2429         unsigned long flags;
2430         struct list_head *cursor, *next, rx_queue;
2431         int ret = 0, work_done = 0;
2432         struct napi_struct *napi = &tp->napi;
2433
2434         if (!skb_queue_empty(&tp->rx_queue)) {
2435                 while (work_done < budget) {
2436                         struct sk_buff *skb = __skb_dequeue(&tp->rx_queue);
2437                         struct net_device *netdev = tp->netdev;
2438                         struct net_device_stats *stats = &netdev->stats;
2439                         unsigned int pkt_len;
2440
2441                         if (!skb)
2442                                 break;
2443
2444                         pkt_len = skb->len;
2445                         napi_gro_receive(napi, skb);
2446                         work_done++;
2447                         stats->rx_packets++;
2448                         stats->rx_bytes += pkt_len;
2449                 }
2450         }
2451
2452         if (list_empty(&tp->rx_done))
2453                 goto out1;
2454
2455         clear_bit(RX_EPROTO, &tp->flags);
2456         INIT_LIST_HEAD(&rx_queue);
2457         spin_lock_irqsave(&tp->rx_lock, flags);
2458         list_splice_init(&tp->rx_done, &rx_queue);
2459         spin_unlock_irqrestore(&tp->rx_lock, flags);
2460
2461         list_for_each_safe(cursor, next, &rx_queue) {
2462                 struct rx_desc *rx_desc;
2463                 struct rx_agg *agg, *agg_free;
2464                 int len_used = 0;
2465                 struct urb *urb;
2466                 u8 *rx_data;
2467
2468                 list_del_init(cursor);
2469
2470                 agg = list_entry(cursor, struct rx_agg, list);
2471                 urb = agg->urb;
2472                 if (urb->status != 0 || urb->actual_length < ETH_ZLEN)
2473                         goto submit;
2474
2475                 agg_free = rtl_get_free_rx(tp, GFP_ATOMIC);
2476
2477                 rx_desc = agg->buffer;
2478                 rx_data = agg->buffer;
2479                 len_used += sizeof(struct rx_desc);
2480
2481                 while (urb->actual_length > len_used) {
2482                         struct net_device *netdev = tp->netdev;
2483                         struct net_device_stats *stats = &netdev->stats;
2484                         unsigned int pkt_len, rx_frag_head_sz;
2485                         struct sk_buff *skb;
2486
2487                         /* limit the skb numbers for rx_queue */
2488                         if (unlikely(skb_queue_len(&tp->rx_queue) >= 1000))
2489                                 break;
2490
2491                         pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
2492                         if (pkt_len < ETH_ZLEN)
2493                                 break;
2494
2495                         len_used += pkt_len;
2496                         if (urb->actual_length < len_used)
2497                                 break;
2498
2499                         pkt_len -= ETH_FCS_LEN;
2500                         rx_data += sizeof(struct rx_desc);
2501
2502                         if (!agg_free || tp->rx_copybreak > pkt_len)
2503                                 rx_frag_head_sz = pkt_len;
2504                         else
2505                                 rx_frag_head_sz = tp->rx_copybreak;
2506
2507                         skb = napi_alloc_skb(napi, rx_frag_head_sz);
2508                         if (!skb) {
2509                                 stats->rx_dropped++;
2510                                 goto find_next_rx;
2511                         }
2512
2513                         skb->ip_summed = r8152_rx_csum(tp, rx_desc);
2514                         memcpy(skb->data, rx_data, rx_frag_head_sz);
2515                         skb_put(skb, rx_frag_head_sz);
2516                         pkt_len -= rx_frag_head_sz;
2517                         rx_data += rx_frag_head_sz;
2518                         if (pkt_len) {
2519                                 skb_add_rx_frag(skb, 0, agg->page,
2520                                                 agg_offset(agg, rx_data),
2521                                                 pkt_len,
2522                                                 SKB_DATA_ALIGN(pkt_len));
2523                                 get_page(agg->page);
2524                         }
2525
2526                         skb->protocol = eth_type_trans(skb, netdev);
2527                         rtl_rx_vlan_tag(rx_desc, skb);
2528                         if (work_done < budget) {
2529                                 work_done++;
2530                                 stats->rx_packets++;
2531                                 stats->rx_bytes += skb->len;
2532                                 napi_gro_receive(napi, skb);
2533                         } else {
2534                                 __skb_queue_tail(&tp->rx_queue, skb);
2535                         }
2536
2537 find_next_rx:
2538                         rx_data = rx_agg_align(rx_data + pkt_len + ETH_FCS_LEN);
2539                         rx_desc = (struct rx_desc *)rx_data;
2540                         len_used = agg_offset(agg, rx_data);
2541                         len_used += sizeof(struct rx_desc);
2542                 }
2543
2544                 WARN_ON(!agg_free && page_count(agg->page) > 1);
2545
2546                 if (agg_free) {
2547                         spin_lock_irqsave(&tp->rx_lock, flags);
2548                         if (page_count(agg->page) == 1) {
2549                                 list_add(&agg_free->list, &tp->rx_used);
2550                         } else {
2551                                 list_add_tail(&agg->list, &tp->rx_used);
2552                                 agg = agg_free;
2553                                 urb = agg->urb;
2554                         }
2555                         spin_unlock_irqrestore(&tp->rx_lock, flags);
2556                 }
2557
2558 submit:
2559                 if (!ret) {
2560                         ret = r8152_submit_rx(tp, agg, GFP_ATOMIC);
2561                 } else {
2562                         urb->actual_length = 0;
2563                         list_add_tail(&agg->list, next);
2564                 }
2565         }
2566
2567         if (!list_empty(&rx_queue)) {
2568                 spin_lock_irqsave(&tp->rx_lock, flags);
2569                 list_splice_tail(&rx_queue, &tp->rx_done);
2570                 spin_unlock_irqrestore(&tp->rx_lock, flags);
2571         }
2572
2573 out1:
2574         return work_done;
2575 }
2576
2577 static void tx_bottom(struct r8152 *tp)
2578 {
2579         int res;
2580
2581         do {
2582                 struct net_device *netdev = tp->netdev;
2583                 struct tx_agg *agg;
2584
2585                 if (skb_queue_empty(&tp->tx_queue))
2586                         break;
2587
2588                 agg = r8152_get_tx_agg(tp);
2589                 if (!agg)
2590                         break;
2591
2592                 res = r8152_tx_agg_fill(tp, agg);
2593                 if (!res)
2594                         continue;
2595
2596                 if (res == -ENODEV) {
2597                         rtl_set_unplug(tp);
2598                         netif_device_detach(netdev);
2599                 } else {
2600                         struct net_device_stats *stats = &netdev->stats;
2601                         unsigned long flags;
2602
2603                         netif_warn(tp, tx_err, netdev,
2604                                    "failed tx_urb %d\n", res);
2605                         stats->tx_dropped += agg->skb_num;
2606
2607                         spin_lock_irqsave(&tp->tx_lock, flags);
2608                         list_add_tail(&agg->list, &tp->tx_free);
2609                         spin_unlock_irqrestore(&tp->tx_lock, flags);
2610                 }
2611         } while (res == 0);
2612 }
2613
2614 static void bottom_half(struct tasklet_struct *t)
2615 {
2616         struct r8152 *tp = from_tasklet(tp, t, tx_tl);
2617
2618         if (test_bit(RTL8152_UNPLUG, &tp->flags))
2619                 return;
2620
2621         if (!test_bit(WORK_ENABLE, &tp->flags))
2622                 return;
2623
2624         /* When link down, the driver would cancel all bulks. */
2625         /* This avoid the re-submitting bulk */
2626         if (!netif_carrier_ok(tp->netdev))
2627                 return;
2628
2629         clear_bit(SCHEDULE_TASKLET, &tp->flags);
2630
2631         tx_bottom(tp);
2632 }
2633
2634 static int r8152_poll(struct napi_struct *napi, int budget)
2635 {
2636         struct r8152 *tp = container_of(napi, struct r8152, napi);
2637         int work_done;
2638
2639         work_done = rx_bottom(tp, budget);
2640
2641         if (work_done < budget) {
2642                 if (!napi_complete_done(napi, work_done))
2643                         goto out;
2644                 if (!list_empty(&tp->rx_done))
2645                         napi_schedule(napi);
2646         }
2647
2648 out:
2649         return work_done;
2650 }
2651
2652 static
2653 int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags)
2654 {
2655         int ret;
2656
2657         /* The rx would be stopped, so skip submitting */
2658         if (test_bit(RTL8152_UNPLUG, &tp->flags) ||
2659             !test_bit(WORK_ENABLE, &tp->flags) || !netif_carrier_ok(tp->netdev))
2660                 return 0;
2661
2662         usb_fill_bulk_urb(agg->urb, tp->udev, tp->pipe_in,
2663                           agg->buffer, tp->rx_buf_sz,
2664                           (usb_complete_t)read_bulk_callback, agg);
2665
2666         ret = usb_submit_urb(agg->urb, mem_flags);
2667         if (ret == -ENODEV) {
2668                 rtl_set_unplug(tp);
2669                 netif_device_detach(tp->netdev);
2670         } else if (ret) {
2671                 struct urb *urb = agg->urb;
2672                 unsigned long flags;
2673
2674                 urb->actual_length = 0;
2675                 spin_lock_irqsave(&tp->rx_lock, flags);
2676                 list_add_tail(&agg->list, &tp->rx_done);
2677                 spin_unlock_irqrestore(&tp->rx_lock, flags);
2678
2679                 netif_err(tp, rx_err, tp->netdev,
2680                           "Couldn't submit rx[%p], ret = %d\n", agg, ret);
2681
2682                 napi_schedule(&tp->napi);
2683         }
2684
2685         return ret;
2686 }
2687
2688 static void rtl_drop_queued_tx(struct r8152 *tp)
2689 {
2690         struct net_device_stats *stats = &tp->netdev->stats;
2691         struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
2692         struct sk_buff *skb;
2693
2694         if (skb_queue_empty(tx_queue))
2695                 return;
2696
2697         __skb_queue_head_init(&skb_head);
2698         spin_lock_bh(&tx_queue->lock);
2699         skb_queue_splice_init(tx_queue, &skb_head);
2700         spin_unlock_bh(&tx_queue->lock);
2701
2702         while ((skb = __skb_dequeue(&skb_head))) {
2703                 dev_kfree_skb(skb);
2704                 stats->tx_dropped++;
2705         }
2706 }
2707
2708 static void rtl8152_tx_timeout(struct net_device *netdev, unsigned int txqueue)
2709 {
2710         struct r8152 *tp = netdev_priv(netdev);
2711
2712         netif_warn(tp, tx_err, netdev, "Tx timeout\n");
2713
2714         usb_queue_reset_device(tp->intf);
2715 }
2716
2717 static void rtl8152_set_rx_mode(struct net_device *netdev)
2718 {
2719         struct r8152 *tp = netdev_priv(netdev);
2720
2721         if (netif_carrier_ok(netdev)) {
2722                 set_bit(RTL8152_SET_RX_MODE, &tp->flags);
2723                 schedule_delayed_work(&tp->schedule, 0);
2724         }
2725 }
2726
2727 static void _rtl8152_set_rx_mode(struct net_device *netdev)
2728 {
2729         struct r8152 *tp = netdev_priv(netdev);
2730         u32 mc_filter[2];       /* Multicast hash filter */
2731         __le32 tmp[2];
2732         u32 ocp_data;
2733
2734         netif_stop_queue(netdev);
2735         ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
2736         ocp_data &= ~RCR_ACPT_ALL;
2737         ocp_data |= RCR_AB | RCR_APM;
2738
2739         if (netdev->flags & IFF_PROMISC) {
2740                 /* Unconditionally log net taps. */
2741                 netif_notice(tp, link, netdev, "Promiscuous mode enabled\n");
2742                 ocp_data |= RCR_AM | RCR_AAP;
2743                 mc_filter[1] = 0xffffffff;
2744                 mc_filter[0] = 0xffffffff;
2745         } else if ((netdev->flags & IFF_MULTICAST &&
2746                                 netdev_mc_count(netdev) > multicast_filter_limit) ||
2747                            (netdev->flags & IFF_ALLMULTI)) {
2748                 /* Too many to filter perfectly -- accept all multicasts. */
2749                 ocp_data |= RCR_AM;
2750                 mc_filter[1] = 0xffffffff;
2751                 mc_filter[0] = 0xffffffff;
2752         } else {
2753                 mc_filter[1] = 0;
2754                 mc_filter[0] = 0;
2755
2756                 if (netdev->flags & IFF_MULTICAST) {
2757                         struct netdev_hw_addr *ha;
2758
2759                         netdev_for_each_mc_addr(ha, netdev) {
2760                                 int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
2761
2762                                 mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
2763                                 ocp_data |= RCR_AM;
2764                         }
2765                 }
2766         }
2767
2768         tmp[0] = __cpu_to_le32(swab32(mc_filter[1]));
2769         tmp[1] = __cpu_to_le32(swab32(mc_filter[0]));
2770
2771         pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(tmp), tmp);
2772         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
2773         netif_wake_queue(netdev);
2774 }
2775
2776 static netdev_features_t
2777 rtl8152_features_check(struct sk_buff *skb, struct net_device *dev,
2778                        netdev_features_t features)
2779 {
2780         u32 mss = skb_shinfo(skb)->gso_size;
2781         int max_offset = mss ? GTTCPHO_MAX : TCPHO_MAX;
2782
2783         if ((mss || skb->ip_summed == CHECKSUM_PARTIAL) &&
2784             skb_transport_offset(skb) > max_offset)
2785                 features &= ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
2786         else if ((skb->len + sizeof(struct tx_desc)) > agg_buf_sz)
2787                 features &= ~NETIF_F_GSO_MASK;
2788
2789         return features;
2790 }
2791
2792 static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
2793                                       struct net_device *netdev)
2794 {
2795         struct r8152 *tp = netdev_priv(netdev);
2796
2797         skb_tx_timestamp(skb);
2798
2799         skb_queue_tail(&tp->tx_queue, skb);
2800
2801         if (!list_empty(&tp->tx_free)) {
2802                 if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
2803                         set_bit(SCHEDULE_TASKLET, &tp->flags);
2804                         schedule_delayed_work(&tp->schedule, 0);
2805                 } else {
2806                         usb_mark_last_busy(tp->udev);
2807                         tasklet_schedule(&tp->tx_tl);
2808                 }
2809         } else if (skb_queue_len(&tp->tx_queue) > tp->tx_qlen) {
2810                 netif_stop_queue(netdev);
2811         }
2812
2813         return NETDEV_TX_OK;
2814 }
2815
2816 static void r8152b_reset_packet_filter(struct r8152 *tp)
2817 {
2818         u32 ocp_data;
2819
2820         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
2821         ocp_data &= ~FMC_FCR_MCU_EN;
2822         ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
2823         ocp_data |= FMC_FCR_MCU_EN;
2824         ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
2825 }
2826
2827 static void rtl8152_nic_reset(struct r8152 *tp)
2828 {
2829         u32 ocp_data;
2830         int i;
2831
2832         switch (tp->version) {
2833         case RTL_TEST_01:
2834         case RTL_VER_10:
2835         case RTL_VER_11:
2836                 ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
2837                 ocp_data &= ~CR_TE;
2838                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
2839
2840                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
2841                 ocp_data &= ~BMU_RESET_EP_IN;
2842                 ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
2843
2844                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
2845                 ocp_data |= CDC_ECM_EN;
2846                 ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
2847
2848                 ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
2849                 ocp_data &= ~CR_RE;
2850                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
2851
2852                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
2853                 ocp_data |= BMU_RESET_EP_IN;
2854                 ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
2855
2856                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
2857                 ocp_data &= ~CDC_ECM_EN;
2858                 ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
2859                 break;
2860
2861         default:
2862                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
2863
2864                 for (i = 0; i < 1000; i++) {
2865                         if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
2866                                 break;
2867                         usleep_range(100, 400);
2868                 }
2869                 break;
2870         }
2871 }
2872
2873 static void set_tx_qlen(struct r8152 *tp)
2874 {
2875         tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc));
2876 }
2877
2878 static inline u16 rtl8152_get_speed(struct r8152 *tp)
2879 {
2880         return ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
2881 }
2882
2883 static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
2884 {
2885         u32 ocp_data;
2886
2887         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
2888         if (enable)
2889                 ocp_data |= EEEP_CR_EEEP_TX;
2890         else
2891                 ocp_data &= ~EEEP_CR_EEEP_TX;
2892         ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
2893 }
2894
2895 static void rtl_set_eee_plus(struct r8152 *tp)
2896 {
2897         if (rtl8152_get_speed(tp) & _10bps)
2898                 rtl_eee_plus_en(tp, true);
2899         else
2900                 rtl_eee_plus_en(tp, false);
2901 }
2902
2903 static void rxdy_gated_en(struct r8152 *tp, bool enable)
2904 {
2905         u32 ocp_data;
2906
2907         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
2908         if (enable)
2909                 ocp_data |= RXDY_GATED_EN;
2910         else
2911                 ocp_data &= ~RXDY_GATED_EN;
2912         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
2913 }
2914
2915 static int rtl_start_rx(struct r8152 *tp)
2916 {
2917         struct rx_agg *agg, *agg_next;
2918         struct list_head tmp_list;
2919         unsigned long flags;
2920         int ret = 0, i = 0;
2921
2922         INIT_LIST_HEAD(&tmp_list);
2923
2924         spin_lock_irqsave(&tp->rx_lock, flags);
2925
2926         INIT_LIST_HEAD(&tp->rx_done);
2927         INIT_LIST_HEAD(&tp->rx_used);
2928
2929         list_splice_init(&tp->rx_info, &tmp_list);
2930
2931         spin_unlock_irqrestore(&tp->rx_lock, flags);
2932
2933         list_for_each_entry_safe(agg, agg_next, &tmp_list, info_list) {
2934                 INIT_LIST_HEAD(&agg->list);
2935
2936                 /* Only RTL8152_MAX_RX rx_agg need to be submitted. */
2937                 if (++i > RTL8152_MAX_RX) {
2938                         spin_lock_irqsave(&tp->rx_lock, flags);
2939                         list_add_tail(&agg->list, &tp->rx_used);
2940                         spin_unlock_irqrestore(&tp->rx_lock, flags);
2941                 } else if (unlikely(ret < 0)) {
2942                         spin_lock_irqsave(&tp->rx_lock, flags);
2943                         list_add_tail(&agg->list, &tp->rx_done);
2944                         spin_unlock_irqrestore(&tp->rx_lock, flags);
2945                 } else {
2946                         ret = r8152_submit_rx(tp, agg, GFP_KERNEL);
2947                 }
2948         }
2949
2950         spin_lock_irqsave(&tp->rx_lock, flags);
2951         WARN_ON(!list_empty(&tp->rx_info));
2952         list_splice(&tmp_list, &tp->rx_info);
2953         spin_unlock_irqrestore(&tp->rx_lock, flags);
2954
2955         return ret;
2956 }
2957
2958 static int rtl_stop_rx(struct r8152 *tp)
2959 {
2960         struct rx_agg *agg, *agg_next;
2961         struct list_head tmp_list;
2962         unsigned long flags;
2963
2964         INIT_LIST_HEAD(&tmp_list);
2965
2966         /* The usb_kill_urb() couldn't be used in atomic.
2967          * Therefore, move the list of rx_info to a tmp one.
2968          * Then, list_for_each_entry_safe could be used without
2969          * spin lock.
2970          */
2971
2972         spin_lock_irqsave(&tp->rx_lock, flags);
2973         list_splice_init(&tp->rx_info, &tmp_list);
2974         spin_unlock_irqrestore(&tp->rx_lock, flags);
2975
2976         list_for_each_entry_safe(agg, agg_next, &tmp_list, info_list) {
2977                 /* At least RTL8152_MAX_RX rx_agg have the page_count being
2978                  * equal to 1, so the other ones could be freed safely.
2979                  */
2980                 if (page_count(agg->page) > 1)
2981                         free_rx_agg(tp, agg);
2982                 else
2983                         usb_kill_urb(agg->urb);
2984         }
2985
2986         /* Move back the list of temp to the rx_info */
2987         spin_lock_irqsave(&tp->rx_lock, flags);
2988         WARN_ON(!list_empty(&tp->rx_info));
2989         list_splice(&tmp_list, &tp->rx_info);
2990         spin_unlock_irqrestore(&tp->rx_lock, flags);
2991
2992         while (!skb_queue_empty(&tp->rx_queue))
2993                 dev_kfree_skb(__skb_dequeue(&tp->rx_queue));
2994
2995         return 0;
2996 }
2997
2998 static void rtl_set_ifg(struct r8152 *tp, u16 speed)
2999 {
3000         u32 ocp_data;
3001
3002         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
3003         ocp_data &= ~IFG_MASK;
3004         if ((speed & (_10bps | _100bps)) && !(speed & FULL_DUP)) {
3005                 ocp_data |= IFG_144NS;
3006                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
3007
3008                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
3009                 ocp_data &= ~TX10MIDLE_EN;
3010                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
3011         } else {
3012                 ocp_data |= IFG_96NS;
3013                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
3014
3015                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
3016                 ocp_data |= TX10MIDLE_EN;
3017                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
3018         }
3019 }
3020
3021 static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
3022 {
3023         ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN,
3024                        OWN_UPDATE | OWN_CLEAR);
3025 }
3026
3027 static int rtl_enable(struct r8152 *tp)
3028 {
3029         u32 ocp_data;
3030
3031         r8152b_reset_packet_filter(tp);
3032
3033         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
3034         ocp_data |= CR_RE | CR_TE;
3035         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
3036
3037         switch (tp->version) {
3038         case RTL_VER_01:
3039         case RTL_VER_02:
3040         case RTL_VER_03:
3041         case RTL_VER_04:
3042         case RTL_VER_05:
3043         case RTL_VER_06:
3044         case RTL_VER_07:
3045                 break;
3046         default:
3047                 r8153b_rx_agg_chg_indicate(tp);
3048                 break;
3049         }
3050
3051         rxdy_gated_en(tp, false);
3052
3053         return 0;
3054 }
3055
3056 static int rtl8152_enable(struct r8152 *tp)
3057 {
3058         if (test_bit(RTL8152_UNPLUG, &tp->flags))
3059                 return -ENODEV;
3060
3061         set_tx_qlen(tp);
3062         rtl_set_eee_plus(tp);
3063
3064         return rtl_enable(tp);
3065 }
3066
3067 static void r8153_set_rx_early_timeout(struct r8152 *tp)
3068 {
3069         u32 ocp_data = tp->coalesce / 8;
3070
3071         switch (tp->version) {
3072         case RTL_VER_03:
3073         case RTL_VER_04:
3074         case RTL_VER_05:
3075         case RTL_VER_06:
3076                 ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
3077                                ocp_data);
3078                 break;
3079
3080         case RTL_VER_08:
3081         case RTL_VER_09:
3082         case RTL_VER_14:
3083                 /* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout
3084                  * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns.
3085                  */
3086                 ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
3087                                128 / 8);
3088                 ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR,
3089                                ocp_data);
3090                 break;
3091
3092         case RTL_VER_10:
3093         case RTL_VER_11:
3094         case RTL_VER_12:
3095         case RTL_VER_13:
3096         case RTL_VER_15:
3097                 ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
3098                                640 / 8);
3099                 ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR,
3100                                ocp_data);
3101                 break;
3102
3103         default:
3104                 break;
3105         }
3106 }
3107
3108 static void r8153_set_rx_early_size(struct r8152 *tp)
3109 {
3110         u32 ocp_data = tp->rx_buf_sz - rx_reserved_size(tp->netdev->mtu);
3111
3112         switch (tp->version) {
3113         case RTL_VER_03:
3114         case RTL_VER_04:
3115         case RTL_VER_05:
3116         case RTL_VER_06:
3117                 ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
3118                                ocp_data / 4);
3119                 break;
3120         case RTL_VER_08:
3121         case RTL_VER_09:
3122         case RTL_VER_14:
3123                 ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
3124                                ocp_data / 8);
3125                 break;
3126         case RTL_TEST_01:
3127         case RTL_VER_10:
3128         case RTL_VER_11:
3129         case RTL_VER_12:
3130         case RTL_VER_13:
3131         case RTL_VER_15:
3132                 ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
3133                                ocp_data / 8);
3134                 break;
3135         default:
3136                 WARN_ON_ONCE(1);
3137                 break;
3138         }
3139 }
3140
3141 static int rtl8153_enable(struct r8152 *tp)
3142 {
3143         u32 ocp_data;
3144
3145         if (test_bit(RTL8152_UNPLUG, &tp->flags))
3146                 return -ENODEV;
3147
3148         set_tx_qlen(tp);
3149         rtl_set_eee_plus(tp);
3150         r8153_set_rx_early_timeout(tp);
3151         r8153_set_rx_early_size(tp);
3152
3153         rtl_set_ifg(tp, rtl8152_get_speed(tp));
3154
3155         switch (tp->version) {
3156         case RTL_VER_09:
3157         case RTL_VER_14:
3158                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
3159                 ocp_data &= ~FC_PATCH_TASK;
3160                 ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
3161                 usleep_range(1000, 2000);
3162                 ocp_data |= FC_PATCH_TASK;
3163                 ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
3164                 break;
3165         default:
3166                 break;
3167         }
3168
3169         return rtl_enable(tp);
3170 }
3171
3172 static void rtl_disable(struct r8152 *tp)
3173 {
3174         u32 ocp_data;
3175         int i;
3176
3177         if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
3178                 rtl_drop_queued_tx(tp);
3179                 return;
3180         }
3181
3182         ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
3183         ocp_data &= ~RCR_ACPT_ALL;
3184         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
3185
3186         rtl_drop_queued_tx(tp);
3187
3188         for (i = 0; i < RTL8152_MAX_TX; i++)
3189                 usb_kill_urb(tp->tx_info[i].urb);
3190
3191         rxdy_gated_en(tp, true);
3192
3193         for (i = 0; i < 1000; i++) {
3194                 ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
3195                 if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY)
3196                         break;
3197                 usleep_range(1000, 2000);
3198         }
3199
3200         for (i = 0; i < 1000; i++) {
3201                 if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY)
3202                         break;
3203                 usleep_range(1000, 2000);
3204         }
3205
3206         rtl_stop_rx(tp);
3207
3208         rtl8152_nic_reset(tp);
3209 }
3210
3211 static void r8152_power_cut_en(struct r8152 *tp, bool enable)
3212 {
3213         u32 ocp_data;
3214
3215         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
3216         if (enable)
3217                 ocp_data |= POWER_CUT;
3218         else
3219                 ocp_data &= ~POWER_CUT;
3220         ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
3221
3222         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
3223         ocp_data &= ~RESUME_INDICATE;
3224         ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
3225 }
3226
3227 static void rtl_rx_vlan_en(struct r8152 *tp, bool enable)
3228 {
3229         u32 ocp_data;
3230
3231         switch (tp->version) {
3232         case RTL_VER_01:
3233         case RTL_VER_02:
3234         case RTL_VER_03:
3235         case RTL_VER_04:
3236         case RTL_VER_05:
3237         case RTL_VER_06:
3238         case RTL_VER_07:
3239         case RTL_VER_08:
3240         case RTL_VER_09:
3241         case RTL_VER_14:
3242                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
3243                 if (enable)
3244                         ocp_data |= CPCR_RX_VLAN;
3245                 else
3246                         ocp_data &= ~CPCR_RX_VLAN;
3247                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
3248                 break;
3249
3250         case RTL_TEST_01:
3251         case RTL_VER_10:
3252         case RTL_VER_11:
3253         case RTL_VER_12:
3254         case RTL_VER_13:
3255         case RTL_VER_15:
3256         default:
3257                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR1);
3258                 if (enable)
3259                         ocp_data |= OUTER_VLAN | INNER_VLAN;
3260                 else
3261                         ocp_data &= ~(OUTER_VLAN | INNER_VLAN);
3262                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR1, ocp_data);
3263                 break;
3264         }
3265 }
3266
3267 static int rtl8152_set_features(struct net_device *dev,
3268                                 netdev_features_t features)
3269 {
3270         netdev_features_t changed = features ^ dev->features;
3271         struct r8152 *tp = netdev_priv(dev);
3272         int ret;
3273
3274         ret = usb_autopm_get_interface(tp->intf);
3275         if (ret < 0)
3276                 goto out;
3277
3278         mutex_lock(&tp->control);
3279
3280         if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
3281                 if (features & NETIF_F_HW_VLAN_CTAG_RX)
3282                         rtl_rx_vlan_en(tp, true);
3283                 else
3284                         rtl_rx_vlan_en(tp, false);
3285         }
3286
3287         mutex_unlock(&tp->control);
3288
3289         usb_autopm_put_interface(tp->intf);
3290
3291 out:
3292         return ret;
3293 }
3294
3295 #define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
3296
3297 static u32 __rtl_get_wol(struct r8152 *tp)
3298 {
3299         u32 ocp_data;
3300         u32 wolopts = 0;
3301
3302         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
3303         if (ocp_data & LINK_ON_WAKE_EN)
3304                 wolopts |= WAKE_PHY;
3305
3306         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
3307         if (ocp_data & UWF_EN)
3308                 wolopts |= WAKE_UCAST;
3309         if (ocp_data & BWF_EN)
3310                 wolopts |= WAKE_BCAST;
3311         if (ocp_data & MWF_EN)
3312                 wolopts |= WAKE_MCAST;
3313
3314         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
3315         if (ocp_data & MAGIC_EN)
3316                 wolopts |= WAKE_MAGIC;
3317
3318         return wolopts;
3319 }
3320
3321 static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
3322 {
3323         u32 ocp_data;
3324
3325         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
3326
3327         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
3328         ocp_data &= ~LINK_ON_WAKE_EN;
3329         if (wolopts & WAKE_PHY)
3330                 ocp_data |= LINK_ON_WAKE_EN;
3331         ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
3332
3333         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
3334         ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN);
3335         if (wolopts & WAKE_UCAST)
3336                 ocp_data |= UWF_EN;
3337         if (wolopts & WAKE_BCAST)
3338                 ocp_data |= BWF_EN;
3339         if (wolopts & WAKE_MCAST)
3340                 ocp_data |= MWF_EN;
3341         ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
3342
3343         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
3344
3345         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
3346         ocp_data &= ~MAGIC_EN;
3347         if (wolopts & WAKE_MAGIC)
3348                 ocp_data |= MAGIC_EN;
3349         ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
3350
3351         if (wolopts & WAKE_ANY)
3352                 device_set_wakeup_enable(&tp->udev->dev, true);
3353         else
3354                 device_set_wakeup_enable(&tp->udev->dev, false);
3355 }
3356
3357 static void r8153_mac_clk_speed_down(struct r8152 *tp, bool enable)
3358 {
3359         u32 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
3360
3361         /* MAC clock speed down */
3362         if (enable)
3363                 ocp_data |= MAC_CLK_SPDWN_EN;
3364         else
3365                 ocp_data &= ~MAC_CLK_SPDWN_EN;
3366
3367         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
3368 }
3369
3370 static void r8156_mac_clk_spd(struct r8152 *tp, bool enable)
3371 {
3372         u32 ocp_data;
3373
3374         /* MAC clock speed down */
3375         if (enable) {
3376                 /* aldps_spdwn_ratio, tp10_spdwn_ratio */
3377                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL,
3378                                0x0403);
3379
3380                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
3381                 ocp_data &= ~EEE_SPDWN_RATIO_MASK;
3382                 ocp_data |= MAC_CLK_SPDWN_EN | 0x03; /* eee_spdwn_ratio */
3383                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
3384         } else {
3385                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
3386                 ocp_data &= ~MAC_CLK_SPDWN_EN;
3387                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
3388         }
3389 }
3390
3391 static void r8153_u1u2en(struct r8152 *tp, bool enable)
3392 {
3393         u8 u1u2[8];
3394
3395         if (enable)
3396                 memset(u1u2, 0xff, sizeof(u1u2));
3397         else
3398                 memset(u1u2, 0x00, sizeof(u1u2));
3399
3400         usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
3401 }
3402
3403 static void r8153b_u1u2en(struct r8152 *tp, bool enable)
3404 {
3405         u32 ocp_data;
3406
3407         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG);
3408         if (enable)
3409                 ocp_data |= LPM_U1U2_EN;
3410         else
3411                 ocp_data &= ~LPM_U1U2_EN;
3412
3413         ocp_write_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG, ocp_data);
3414 }
3415
3416 static void r8153_u2p3en(struct r8152 *tp, bool enable)
3417 {
3418         u32 ocp_data;
3419
3420         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
3421         if (enable)
3422                 ocp_data |= U2P3_ENABLE;
3423         else
3424                 ocp_data &= ~U2P3_ENABLE;
3425         ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
3426 }
3427
3428 static void r8153b_ups_flags(struct r8152 *tp)
3429 {
3430         u32 ups_flags = 0;
3431
3432         if (tp->ups_info.green)
3433                 ups_flags |= UPS_FLAGS_EN_GREEN;
3434
3435         if (tp->ups_info.aldps)
3436                 ups_flags |= UPS_FLAGS_EN_ALDPS;
3437
3438         if (tp->ups_info.eee)
3439                 ups_flags |= UPS_FLAGS_EN_EEE;
3440
3441         if (tp->ups_info.flow_control)
3442                 ups_flags |= UPS_FLAGS_EN_FLOW_CTR;
3443
3444         if (tp->ups_info.eee_ckdiv)
3445                 ups_flags |= UPS_FLAGS_EN_EEE_CKDIV;
3446
3447         if (tp->ups_info.eee_cmod_lv)
3448                 ups_flags |= UPS_FLAGS_EEE_CMOD_LV_EN;
3449
3450         if (tp->ups_info.r_tune)
3451                 ups_flags |= UPS_FLAGS_R_TUNE;
3452
3453         if (tp->ups_info._10m_ckdiv)
3454                 ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
3455
3456         if (tp->ups_info.eee_plloff_100)
3457                 ups_flags |= UPS_FLAGS_EEE_PLLOFF_100;
3458
3459         if (tp->ups_info.eee_plloff_giga)
3460                 ups_flags |= UPS_FLAGS_EEE_PLLOFF_GIGA;
3461
3462         if (tp->ups_info._250m_ckdiv)
3463                 ups_flags |= UPS_FLAGS_250M_CKDIV;
3464
3465         if (tp->ups_info.ctap_short_off)
3466                 ups_flags |= UPS_FLAGS_CTAP_SHORT_DIS;
3467
3468         switch (tp->ups_info.speed_duplex) {
3469         case NWAY_10M_HALF:
3470                 ups_flags |= ups_flags_speed(1);
3471                 break;
3472         case NWAY_10M_FULL:
3473                 ups_flags |= ups_flags_speed(2);
3474                 break;
3475         case NWAY_100M_HALF:
3476                 ups_flags |= ups_flags_speed(3);
3477                 break;
3478         case NWAY_100M_FULL:
3479                 ups_flags |= ups_flags_speed(4);
3480                 break;
3481         case NWAY_1000M_FULL:
3482                 ups_flags |= ups_flags_speed(5);
3483                 break;
3484         case FORCE_10M_HALF:
3485                 ups_flags |= ups_flags_speed(6);
3486                 break;
3487         case FORCE_10M_FULL:
3488                 ups_flags |= ups_flags_speed(7);
3489                 break;
3490         case FORCE_100M_HALF:
3491                 ups_flags |= ups_flags_speed(8);
3492                 break;
3493         case FORCE_100M_FULL:
3494                 ups_flags |= ups_flags_speed(9);
3495                 break;
3496         default:
3497                 break;
3498         }
3499
3500         ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
3501 }
3502
3503 static void r8156_ups_flags(struct r8152 *tp)
3504 {
3505         u32 ups_flags = 0;
3506
3507         if (tp->ups_info.green)
3508                 ups_flags |= UPS_FLAGS_EN_GREEN;
3509
3510         if (tp->ups_info.aldps)
3511                 ups_flags |= UPS_FLAGS_EN_ALDPS;
3512
3513         if (tp->ups_info.eee)
3514                 ups_flags |= UPS_FLAGS_EN_EEE;
3515
3516         if (tp->ups_info.flow_control)
3517                 ups_flags |= UPS_FLAGS_EN_FLOW_CTR;
3518
3519         if (tp->ups_info.eee_ckdiv)
3520                 ups_flags |= UPS_FLAGS_EN_EEE_CKDIV;
3521
3522         if (tp->ups_info._10m_ckdiv)
3523                 ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
3524
3525         if (tp->ups_info.eee_plloff_100)
3526                 ups_flags |= UPS_FLAGS_EEE_PLLOFF_100;
3527
3528         if (tp->ups_info.eee_plloff_giga)
3529                 ups_flags |= UPS_FLAGS_EEE_PLLOFF_GIGA;
3530
3531         if (tp->ups_info._250m_ckdiv)
3532                 ups_flags |= UPS_FLAGS_250M_CKDIV;
3533
3534         switch (tp->ups_info.speed_duplex) {
3535         case FORCE_10M_HALF:
3536                 ups_flags |= ups_flags_speed(0);
3537                 break;
3538         case FORCE_10M_FULL:
3539                 ups_flags |= ups_flags_speed(1);
3540                 break;
3541         case FORCE_100M_HALF:
3542                 ups_flags |= ups_flags_speed(2);
3543                 break;
3544         case FORCE_100M_FULL:
3545                 ups_flags |= ups_flags_speed(3);
3546                 break;
3547         case NWAY_10M_HALF:
3548                 ups_flags |= ups_flags_speed(4);
3549                 break;
3550         case NWAY_10M_FULL:
3551                 ups_flags |= ups_flags_speed(5);
3552                 break;
3553         case NWAY_100M_HALF:
3554                 ups_flags |= ups_flags_speed(6);
3555                 break;
3556         case NWAY_100M_FULL:
3557                 ups_flags |= ups_flags_speed(7);
3558                 break;
3559         case NWAY_1000M_FULL:
3560                 ups_flags |= ups_flags_speed(8);
3561                 break;
3562         case NWAY_2500M_FULL:
3563                 ups_flags |= ups_flags_speed(9);
3564                 break;
3565         default:
3566                 break;
3567         }
3568
3569         switch (tp->ups_info.lite_mode) {
3570         case 1:
3571                 ups_flags |= 0 << 5;
3572                 break;
3573         case 2:
3574                 ups_flags |= 2 << 5;
3575                 break;
3576         case 0:
3577         default:
3578                 ups_flags |= 1 << 5;
3579                 break;
3580         }
3581
3582         ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
3583 }
3584
3585 static void rtl_green_en(struct r8152 *tp, bool enable)
3586 {
3587         u16 data;
3588
3589         data = sram_read(tp, SRAM_GREEN_CFG);
3590         if (enable)
3591                 data |= GREEN_ETH_EN;
3592         else
3593                 data &= ~GREEN_ETH_EN;
3594         sram_write(tp, SRAM_GREEN_CFG, data);
3595
3596         tp->ups_info.green = enable;
3597 }
3598
3599 static void r8153b_green_en(struct r8152 *tp, bool enable)
3600 {
3601         if (enable) {
3602                 sram_write(tp, 0x8045, 0);      /* 10M abiq&ldvbias */
3603                 sram_write(tp, 0x804d, 0x1222); /* 100M short abiq&ldvbias */
3604                 sram_write(tp, 0x805d, 0x0022); /* 1000M short abiq&ldvbias */
3605         } else {
3606                 sram_write(tp, 0x8045, 0x2444); /* 10M abiq&ldvbias */
3607                 sram_write(tp, 0x804d, 0x2444); /* 100M short abiq&ldvbias */
3608                 sram_write(tp, 0x805d, 0x2444); /* 1000M short abiq&ldvbias */
3609         }
3610
3611         rtl_green_en(tp, true);
3612 }
3613
3614 static u16 r8153_phy_status(struct r8152 *tp, u16 desired)
3615 {
3616         u16 data;
3617         int i;
3618
3619         for (i = 0; i < 500; i++) {
3620                 data = ocp_reg_read(tp, OCP_PHY_STATUS);
3621                 data &= PHY_STAT_MASK;
3622                 if (desired) {
3623                         if (data == desired)
3624                                 break;
3625                 } else if (data == PHY_STAT_LAN_ON || data == PHY_STAT_PWRDN ||
3626                            data == PHY_STAT_EXT_INIT) {
3627                         break;
3628                 }
3629
3630                 msleep(20);
3631                 if (test_bit(RTL8152_UNPLUG, &tp->flags))
3632                         break;
3633         }
3634
3635         return data;
3636 }
3637
3638 static void r8153b_ups_en(struct r8152 *tp, bool enable)
3639 {
3640         u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
3641
3642         if (enable) {
3643                 r8153b_ups_flags(tp);
3644
3645                 ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
3646                 ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
3647
3648                 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
3649                 ocp_data |= UPS_FORCE_PWR_DOWN;
3650                 ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
3651         } else {
3652                 ocp_data &= ~(UPS_EN | USP_PREWAKE);
3653                 ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
3654
3655                 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
3656                 ocp_data &= ~UPS_FORCE_PWR_DOWN;
3657                 ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
3658
3659                 if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
3660                         int i;
3661
3662                         for (i = 0; i < 500; i++) {
3663                                 if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
3664                                     AUTOLOAD_DONE)
3665                                         break;
3666                                 msleep(20);
3667                         }
3668
3669                         tp->rtl_ops.hw_phy_cfg(tp);
3670
3671                         rtl8152_set_speed(tp, tp->autoneg, tp->speed,
3672                                           tp->duplex, tp->advertising);
3673                 }
3674         }
3675 }
3676
3677 static void r8153c_ups_en(struct r8152 *tp, bool enable)
3678 {
3679         u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
3680
3681         if (enable) {
3682                 r8153b_ups_flags(tp);
3683
3684                 ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
3685                 ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
3686
3687                 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
3688                 ocp_data |= UPS_FORCE_PWR_DOWN;
3689                 ocp_data &= ~BIT(7);
3690                 ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
3691         } else {
3692                 ocp_data &= ~(UPS_EN | USP_PREWAKE);
3693                 ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
3694
3695                 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
3696                 ocp_data &= ~UPS_FORCE_PWR_DOWN;
3697                 ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
3698
3699                 if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
3700                         int i;
3701
3702                         for (i = 0; i < 500; i++) {
3703                                 if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
3704                                     AUTOLOAD_DONE)
3705                                         break;
3706                                 msleep(20);
3707                         }
3708
3709                         tp->rtl_ops.hw_phy_cfg(tp);
3710
3711                         rtl8152_set_speed(tp, tp->autoneg, tp->speed,
3712                                           tp->duplex, tp->advertising);
3713                 }
3714
3715                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
3716
3717                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
3718                 ocp_data |= BIT(8);
3719                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
3720
3721                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
3722         }
3723 }
3724
3725 static void r8156_ups_en(struct r8152 *tp, bool enable)
3726 {
3727         u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
3728
3729         if (enable) {
3730                 r8156_ups_flags(tp);
3731
3732                 ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
3733                 ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
3734
3735                 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
3736                 ocp_data |= UPS_FORCE_PWR_DOWN;
3737                 ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
3738
3739                 switch (tp->version) {
3740                 case RTL_VER_13:
3741                 case RTL_VER_15:
3742                         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPHY_XTAL);
3743                         ocp_data &= ~OOBS_POLLING;
3744                         ocp_write_byte(tp, MCU_TYPE_USB, USB_UPHY_XTAL, ocp_data);
3745                         break;
3746                 default:
3747                         break;
3748                 }
3749         } else {
3750                 ocp_data &= ~(UPS_EN | USP_PREWAKE);
3751                 ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
3752
3753                 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
3754                 ocp_data &= ~UPS_FORCE_PWR_DOWN;
3755                 ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
3756
3757                 if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
3758                         tp->rtl_ops.hw_phy_cfg(tp);
3759
3760                         rtl8152_set_speed(tp, tp->autoneg, tp->speed,
3761                                           tp->duplex, tp->advertising);
3762                 }
3763         }
3764 }
3765
3766 static void r8153_power_cut_en(struct r8152 *tp, bool enable)
3767 {
3768         u32 ocp_data;
3769
3770         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
3771         if (enable)
3772                 ocp_data |= PWR_EN | PHASE2_EN;
3773         else
3774                 ocp_data &= ~(PWR_EN | PHASE2_EN);
3775         ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
3776
3777         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
3778         ocp_data &= ~PCUT_STATUS;
3779         ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
3780 }
3781
3782 static void r8153b_power_cut_en(struct r8152 *tp, bool enable)
3783 {
3784         u32 ocp_data;
3785
3786         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
3787         if (enable)
3788                 ocp_data |= PWR_EN | PHASE2_EN;
3789         else
3790                 ocp_data &= ~PWR_EN;
3791         ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
3792
3793         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
3794         ocp_data &= ~PCUT_STATUS;
3795         ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
3796 }
3797
3798 static void r8153_queue_wake(struct r8152 *tp, bool enable)
3799 {
3800         u32 ocp_data;
3801
3802         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG);
3803         if (enable)
3804                 ocp_data |= UPCOMING_RUNTIME_D3;
3805         else
3806                 ocp_data &= ~UPCOMING_RUNTIME_D3;
3807         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG, ocp_data);
3808
3809         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_SUSPEND_FLAG);
3810         ocp_data &= ~LINK_CHG_EVENT;
3811         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_SUSPEND_FLAG, ocp_data);
3812
3813         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
3814         ocp_data &= ~LINK_CHANGE_FLAG;
3815         ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
3816 }
3817
3818 static bool rtl_can_wakeup(struct r8152 *tp)
3819 {
3820         struct usb_device *udev = tp->udev;
3821
3822         return (udev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_WAKEUP);
3823 }
3824
3825 static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable)
3826 {
3827         if (enable) {
3828                 u32 ocp_data;
3829
3830                 __rtl_set_wol(tp, WAKE_ANY);
3831
3832                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
3833
3834                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
3835                 ocp_data |= LINK_OFF_WAKE_EN;
3836                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
3837
3838                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
3839         } else {
3840                 u32 ocp_data;
3841
3842                 __rtl_set_wol(tp, tp->saved_wolopts);
3843
3844                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
3845
3846                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
3847                 ocp_data &= ~LINK_OFF_WAKE_EN;
3848                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
3849
3850                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
3851         }
3852 }
3853
3854 static void rtl8153_runtime_enable(struct r8152 *tp, bool enable)
3855 {
3856         if (enable) {
3857                 r8153_u1u2en(tp, false);
3858                 r8153_u2p3en(tp, false);
3859                 rtl_runtime_suspend_enable(tp, true);
3860         } else {
3861                 rtl_runtime_suspend_enable(tp, false);
3862
3863                 switch (tp->version) {
3864                 case RTL_VER_03:
3865                 case RTL_VER_04:
3866                         break;
3867                 case RTL_VER_05:
3868                 case RTL_VER_06:
3869                 default:
3870                         r8153_u2p3en(tp, true);
3871                         break;
3872                 }
3873
3874                 r8153_u1u2en(tp, true);
3875         }
3876 }
3877
3878 static void rtl8153b_runtime_enable(struct r8152 *tp, bool enable)
3879 {
3880         if (enable) {
3881                 r8153_queue_wake(tp, true);
3882                 r8153b_u1u2en(tp, false);
3883                 r8153_u2p3en(tp, false);
3884                 rtl_runtime_suspend_enable(tp, true);
3885                 r8153b_ups_en(tp, true);
3886         } else {
3887                 r8153b_ups_en(tp, false);
3888                 r8153_queue_wake(tp, false);
3889                 rtl_runtime_suspend_enable(tp, false);
3890                 if (tp->udev->speed >= USB_SPEED_SUPER)
3891                         r8153b_u1u2en(tp, true);
3892         }
3893 }
3894
3895 static void rtl8153c_runtime_enable(struct r8152 *tp, bool enable)
3896 {
3897         if (enable) {
3898                 r8153_queue_wake(tp, true);
3899                 r8153b_u1u2en(tp, false);
3900                 r8153_u2p3en(tp, false);
3901                 rtl_runtime_suspend_enable(tp, true);
3902                 r8153c_ups_en(tp, true);
3903         } else {
3904                 r8153c_ups_en(tp, false);
3905                 r8153_queue_wake(tp, false);
3906                 rtl_runtime_suspend_enable(tp, false);
3907                 r8153b_u1u2en(tp, true);
3908         }
3909 }
3910
3911 static void rtl8156_runtime_enable(struct r8152 *tp, bool enable)
3912 {
3913         if (enable) {
3914                 r8153_queue_wake(tp, true);
3915                 r8153b_u1u2en(tp, false);
3916                 r8153_u2p3en(tp, false);
3917                 rtl_runtime_suspend_enable(tp, true);
3918         } else {
3919                 r8153_queue_wake(tp, false);
3920                 rtl_runtime_suspend_enable(tp, false);
3921                 r8153_u2p3en(tp, true);
3922                 if (tp->udev->speed >= USB_SPEED_SUPER)
3923                         r8153b_u1u2en(tp, true);
3924         }
3925 }
3926
3927 static void r8153_teredo_off(struct r8152 *tp)
3928 {
3929         u32 ocp_data;
3930
3931         switch (tp->version) {
3932         case RTL_VER_01:
3933         case RTL_VER_02:
3934         case RTL_VER_03:
3935         case RTL_VER_04:
3936         case RTL_VER_05:
3937         case RTL_VER_06:
3938         case RTL_VER_07:
3939                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
3940                 ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK |
3941                               OOB_TEREDO_EN);
3942                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
3943                 break;
3944
3945         case RTL_VER_08:
3946         case RTL_VER_09:
3947         case RTL_TEST_01:
3948         case RTL_VER_10:
3949         case RTL_VER_11:
3950         case RTL_VER_12:
3951         case RTL_VER_13:
3952         case RTL_VER_14:
3953         case RTL_VER_15:
3954         default:
3955                 /* The bit 0 ~ 7 are relative with teredo settings. They are
3956                  * W1C (write 1 to clear), so set all 1 to disable it.
3957                  */
3958                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff);
3959                 break;
3960         }
3961
3962         ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
3963         ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
3964         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
3965 }
3966
3967 static void rtl_reset_bmu(struct r8152 *tp)
3968 {
3969         u32 ocp_data;
3970
3971         ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET);
3972         ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
3973         ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
3974         ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT;
3975         ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
3976 }
3977
3978 /* Clear the bp to stop the firmware before loading a new one */
3979 static void rtl_clear_bp(struct r8152 *tp, u16 type)
3980 {
3981         u16 bp[16] = {0};
3982         u16 bp_num;
3983
3984         switch (tp->version) {
3985         case RTL_VER_08:
3986         case RTL_VER_09:
3987         case RTL_VER_10:
3988         case RTL_VER_11:
3989         case RTL_VER_12:
3990         case RTL_VER_13:
3991         case RTL_VER_15:
3992                 if (type == MCU_TYPE_USB) {
3993                         ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
3994                         bp_num = 16;
3995                         break;
3996                 }
3997                 fallthrough;
3998         case RTL_VER_03:
3999         case RTL_VER_04:
4000         case RTL_VER_05:
4001         case RTL_VER_06:
4002                 ocp_write_byte(tp, type, PLA_BP_EN, 0);
4003                 fallthrough;
4004         case RTL_VER_01:
4005         case RTL_VER_02:
4006         case RTL_VER_07:
4007                 bp_num = 8;
4008                 break;
4009         case RTL_VER_14:
4010         default:
4011                 ocp_write_word(tp, type, USB_BP2_EN, 0);
4012                 bp_num = 16;
4013                 break;
4014         }
4015
4016         generic_ocp_write(tp, PLA_BP_0, BYTE_EN_DWORD, bp_num << 1, bp, type);
4017
4018         /* wait 3 ms to make sure the firmware is stopped */
4019         usleep_range(3000, 6000);
4020         ocp_write_word(tp, type, PLA_BP_BA, 0);
4021 }
4022
4023 static inline void rtl_reset_ocp_base(struct r8152 *tp)
4024 {
4025         tp->ocp_base = -1;
4026 }
4027
4028 static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
4029 {
4030         u16 data, check;
4031         int i;
4032
4033         data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD);
4034         if (request) {
4035                 data |= PATCH_REQUEST;
4036                 check = 0;
4037         } else {
4038                 data &= ~PATCH_REQUEST;
4039                 check = PATCH_READY;
4040         }
4041         ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data);
4042
4043         for (i = 0; wait && i < 5000; i++) {
4044                 u32 ocp_data;
4045
4046                 usleep_range(1000, 2000);
4047                 ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT);
4048                 if ((ocp_data & PATCH_READY) ^ check)
4049                         break;
4050         }
4051
4052         if (request && wait &&
4053             !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
4054                 dev_err(&tp->intf->dev, "PHY patch request fail\n");
4055                 rtl_phy_patch_request(tp, false, false);
4056                 return -ETIME;
4057         } else {
4058                 return 0;
4059         }
4060 }
4061
4062 static void rtl_patch_key_set(struct r8152 *tp, u16 key_addr, u16 patch_key)
4063 {
4064         if (patch_key && key_addr) {
4065                 sram_write(tp, key_addr, patch_key);
4066                 sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK);
4067         } else if (key_addr) {
4068                 u16 data;
4069
4070                 sram_write(tp, 0x0000, 0x0000);
4071
4072                 data = ocp_reg_read(tp, OCP_PHY_LOCK);
4073                 data &= ~PATCH_LOCK;
4074                 ocp_reg_write(tp, OCP_PHY_LOCK, data);
4075
4076                 sram_write(tp, key_addr, 0x0000);
4077         } else {
4078                 WARN_ON_ONCE(1);
4079         }
4080 }
4081
4082 static int
4083 rtl_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key, bool wait)
4084 {
4085         if (rtl_phy_patch_request(tp, true, wait))
4086                 return -ETIME;
4087
4088         rtl_patch_key_set(tp, key_addr, patch_key);
4089
4090         return 0;
4091 }
4092
4093 static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait)
4094 {
4095         rtl_patch_key_set(tp, key_addr, 0);
4096
4097         rtl_phy_patch_request(tp, false, wait);
4098
4099         return 0;
4100 }
4101
4102 static bool rtl8152_is_fw_phy_speed_up_ok(struct r8152 *tp, struct fw_phy_speed_up *phy)
4103 {
4104         u16 fw_offset;
4105         u32 length;
4106         bool rc = false;
4107
4108         switch (tp->version) {
4109         case RTL_VER_01:
4110         case RTL_VER_02:
4111         case RTL_VER_03:
4112         case RTL_VER_04:
4113         case RTL_VER_05:
4114         case RTL_VER_06:
4115         case RTL_VER_07:
4116         case RTL_VER_08:
4117         case RTL_VER_09:
4118         case RTL_VER_10:
4119         case RTL_VER_11:
4120         case RTL_VER_12:
4121         case RTL_VER_14:
4122                 goto out;
4123         case RTL_VER_13:
4124         case RTL_VER_15:
4125         default:
4126                 break;
4127         }
4128
4129         fw_offset = __le16_to_cpu(phy->fw_offset);
4130         length = __le32_to_cpu(phy->blk_hdr.length);
4131         if (fw_offset < sizeof(*phy) || length <= fw_offset) {
4132                 dev_err(&tp->intf->dev, "invalid fw_offset\n");
4133                 goto out;
4134         }
4135
4136         length -= fw_offset;
4137         if (length & 3) {
4138                 dev_err(&tp->intf->dev, "invalid block length\n");
4139                 goto out;
4140         }
4141
4142         if (__le16_to_cpu(phy->fw_reg) != 0x9A00) {
4143                 dev_err(&tp->intf->dev, "invalid register to load firmware\n");
4144                 goto out;
4145         }
4146
4147         rc = true;
4148 out:
4149         return rc;
4150 }
4151
4152 static bool rtl8152_is_fw_phy_ver_ok(struct r8152 *tp, struct fw_phy_ver *ver)
4153 {
4154         bool rc = false;
4155
4156         switch (tp->version) {
4157         case RTL_VER_10:
4158         case RTL_VER_11:
4159         case RTL_VER_12:
4160         case RTL_VER_13:
4161         case RTL_VER_15:
4162                 break;
4163         default:
4164                 goto out;
4165         }
4166
4167         if (__le32_to_cpu(ver->blk_hdr.length) != sizeof(*ver)) {
4168                 dev_err(&tp->intf->dev, "invalid block length\n");
4169                 goto out;
4170         }
4171
4172         if (__le16_to_cpu(ver->ver.addr) != SRAM_GPHY_FW_VER) {
4173                 dev_err(&tp->intf->dev, "invalid phy ver addr\n");
4174                 goto out;
4175         }
4176
4177         rc = true;
4178 out:
4179         return rc;
4180 }
4181
4182 static bool rtl8152_is_fw_phy_fixup_ok(struct r8152 *tp, struct fw_phy_fixup *fix)
4183 {
4184         bool rc = false;
4185
4186         switch (tp->version) {
4187         case RTL_VER_10:
4188         case RTL_VER_11:
4189         case RTL_VER_12:
4190         case RTL_VER_13:
4191         case RTL_VER_15:
4192                 break;
4193         default:
4194                 goto out;
4195         }
4196
4197         if (__le32_to_cpu(fix->blk_hdr.length) != sizeof(*fix)) {
4198                 dev_err(&tp->intf->dev, "invalid block length\n");
4199                 goto out;
4200         }
4201
4202         if (__le16_to_cpu(fix->setting.addr) != OCP_PHY_PATCH_CMD ||
4203             __le16_to_cpu(fix->setting.data) != BIT(7)) {
4204                 dev_err(&tp->intf->dev, "invalid phy fixup\n");
4205                 goto out;
4206         }
4207
4208         rc = true;
4209 out:
4210         return rc;
4211 }
4212
4213 static bool rtl8152_is_fw_phy_union_ok(struct r8152 *tp, struct fw_phy_union *phy)
4214 {
4215         u16 fw_offset;
4216         u32 length;
4217         bool rc = false;
4218
4219         switch (tp->version) {
4220         case RTL_VER_10:
4221         case RTL_VER_11:
4222         case RTL_VER_12:
4223         case RTL_VER_13:
4224         case RTL_VER_15:
4225                 break;
4226         default:
4227                 goto out;
4228         }
4229
4230         fw_offset = __le16_to_cpu(phy->fw_offset);
4231         length = __le32_to_cpu(phy->blk_hdr.length);
4232         if (fw_offset < sizeof(*phy) || length <= fw_offset) {
4233                 dev_err(&tp->intf->dev, "invalid fw_offset\n");
4234                 goto out;
4235         }
4236
4237         length -= fw_offset;
4238         if (length & 1) {
4239                 dev_err(&tp->intf->dev, "invalid block length\n");
4240                 goto out;
4241         }
4242
4243         if (phy->pre_num > 2) {
4244                 dev_err(&tp->intf->dev, "invalid pre_num %d\n", phy->pre_num);
4245                 goto out;
4246         }
4247
4248         if (phy->bp_num > 8) {
4249                 dev_err(&tp->intf->dev, "invalid bp_num %d\n", phy->bp_num);
4250                 goto out;
4251         }
4252
4253         rc = true;
4254 out:
4255         return rc;
4256 }
4257
4258 static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy)
4259 {
4260         u32 length;
4261         u16 fw_offset, fw_reg, ba_reg, patch_en_addr, mode_reg, bp_start;
4262         bool rc = false;
4263
4264         switch (tp->version) {
4265         case RTL_VER_04:
4266         case RTL_VER_05:
4267         case RTL_VER_06:
4268                 fw_reg = 0xa014;
4269                 ba_reg = 0xa012;
4270                 patch_en_addr = 0xa01a;
4271                 mode_reg = 0xb820;
4272                 bp_start = 0xa000;
4273                 break;
4274         default:
4275                 goto out;
4276         }
4277
4278         fw_offset = __le16_to_cpu(phy->fw_offset);
4279         if (fw_offset < sizeof(*phy)) {
4280                 dev_err(&tp->intf->dev, "fw_offset too small\n");
4281                 goto out;
4282         }
4283
4284         length = __le32_to_cpu(phy->blk_hdr.length);
4285         if (length < fw_offset) {
4286                 dev_err(&tp->intf->dev, "invalid fw_offset\n");
4287                 goto out;
4288         }
4289
4290         length -= __le16_to_cpu(phy->fw_offset);
4291         if (!length || (length & 1)) {
4292                 dev_err(&tp->intf->dev, "invalid block length\n");
4293                 goto out;
4294         }
4295
4296         if (__le16_to_cpu(phy->fw_reg) != fw_reg) {
4297                 dev_err(&tp->intf->dev, "invalid register to load firmware\n");
4298                 goto out;
4299         }
4300
4301         if (__le16_to_cpu(phy->ba_reg) != ba_reg) {
4302                 dev_err(&tp->intf->dev, "invalid base address register\n");
4303                 goto out;
4304         }
4305
4306         if (__le16_to_cpu(phy->patch_en_addr) != patch_en_addr) {
4307                 dev_err(&tp->intf->dev,
4308                         "invalid patch mode enabled register\n");
4309                 goto out;
4310         }
4311
4312         if (__le16_to_cpu(phy->mode_reg) != mode_reg) {
4313                 dev_err(&tp->intf->dev,
4314                         "invalid register to switch the mode\n");
4315                 goto out;
4316         }
4317
4318         if (__le16_to_cpu(phy->bp_start) != bp_start) {
4319                 dev_err(&tp->intf->dev,
4320                         "invalid start register of break point\n");
4321                 goto out;
4322         }
4323
4324         if (__le16_to_cpu(phy->bp_num) > 4) {
4325                 dev_err(&tp->intf->dev, "invalid break point number\n");
4326                 goto out;
4327         }
4328
4329         rc = true;
4330 out:
4331         return rc;
4332 }
4333
4334 static bool rtl8152_is_fw_mac_ok(struct r8152 *tp, struct fw_mac *mac)
4335 {
4336         u16 fw_reg, bp_ba_addr, bp_en_addr, bp_start, fw_offset;
4337         bool rc = false;
4338         u32 length, type;
4339         int i, max_bp;
4340
4341         type = __le32_to_cpu(mac->blk_hdr.type);
4342         if (type == RTL_FW_PLA) {
4343                 switch (tp->version) {
4344                 case RTL_VER_01:
4345                 case RTL_VER_02:
4346                 case RTL_VER_07:
4347                         fw_reg = 0xf800;
4348                         bp_ba_addr = PLA_BP_BA;
4349                         bp_en_addr = 0;
4350                         bp_start = PLA_BP_0;
4351                         max_bp = 8;
4352                         break;
4353                 case RTL_VER_03:
4354                 case RTL_VER_04:
4355                 case RTL_VER_05:
4356                 case RTL_VER_06:
4357                 case RTL_VER_08:
4358                 case RTL_VER_09:
4359                 case RTL_VER_11:
4360                 case RTL_VER_12:
4361                 case RTL_VER_13:
4362                 case RTL_VER_15:
4363                         fw_reg = 0xf800;
4364                         bp_ba_addr = PLA_BP_BA;
4365                         bp_en_addr = PLA_BP_EN;
4366                         bp_start = PLA_BP_0;
4367                         max_bp = 8;
4368                         break;
4369                 case RTL_VER_14:
4370                         fw_reg = 0xf800;
4371                         bp_ba_addr = PLA_BP_BA;
4372                         bp_en_addr = USB_BP2_EN;
4373                         bp_start = PLA_BP_0;
4374                         max_bp = 16;
4375                         break;
4376                 default:
4377                         goto out;
4378                 }
4379         } else if (type == RTL_FW_USB) {
4380                 switch (tp->version) {
4381                 case RTL_VER_03:
4382                 case RTL_VER_04:
4383                 case RTL_VER_05:
4384                 case RTL_VER_06:
4385                         fw_reg = 0xf800;
4386                         bp_ba_addr = USB_BP_BA;
4387                         bp_en_addr = USB_BP_EN;
4388                         bp_start = USB_BP_0;
4389                         max_bp = 8;
4390                         break;
4391                 case RTL_VER_08:
4392                 case RTL_VER_09:
4393                 case RTL_VER_11:
4394                 case RTL_VER_12:
4395                 case RTL_VER_13:
4396                 case RTL_VER_14:
4397                 case RTL_VER_15:
4398                         fw_reg = 0xe600;
4399                         bp_ba_addr = USB_BP_BA;
4400                         bp_en_addr = USB_BP2_EN;
4401                         bp_start = USB_BP_0;
4402                         max_bp = 16;
4403                         break;
4404                 case RTL_VER_01:
4405                 case RTL_VER_02:
4406                 case RTL_VER_07:
4407                 default:
4408                         goto out;
4409                 }
4410         } else {
4411                 goto out;
4412         }
4413
4414         fw_offset = __le16_to_cpu(mac->fw_offset);
4415         if (fw_offset < sizeof(*mac)) {
4416                 dev_err(&tp->intf->dev, "fw_offset too small\n");
4417                 goto out;
4418         }
4419
4420         length = __le32_to_cpu(mac->blk_hdr.length);
4421         if (length < fw_offset) {
4422                 dev_err(&tp->intf->dev, "invalid fw_offset\n");
4423                 goto out;
4424         }
4425
4426         length -= fw_offset;
4427         if (length < 4 || (length & 3)) {
4428                 dev_err(&tp->intf->dev, "invalid block length\n");
4429                 goto out;
4430         }
4431
4432         if (__le16_to_cpu(mac->fw_reg) != fw_reg) {
4433                 dev_err(&tp->intf->dev, "invalid register to load firmware\n");
4434                 goto out;
4435         }
4436
4437         if (__le16_to_cpu(mac->bp_ba_addr) != bp_ba_addr) {
4438                 dev_err(&tp->intf->dev, "invalid base address register\n");
4439                 goto out;
4440         }
4441
4442         if (__le16_to_cpu(mac->bp_en_addr) != bp_en_addr) {
4443                 dev_err(&tp->intf->dev, "invalid enabled mask register\n");
4444                 goto out;
4445         }
4446
4447         if (__le16_to_cpu(mac->bp_start) != bp_start) {
4448                 dev_err(&tp->intf->dev,
4449                         "invalid start register of break point\n");
4450                 goto out;
4451         }
4452
4453         if (__le16_to_cpu(mac->bp_num) > max_bp) {
4454                 dev_err(&tp->intf->dev, "invalid break point number\n");
4455                 goto out;
4456         }
4457
4458         for (i = __le16_to_cpu(mac->bp_num); i < max_bp; i++) {
4459                 if (mac->bp[i]) {
4460                         dev_err(&tp->intf->dev, "unused bp%u is not zero\n", i);
4461                         goto out;
4462                 }
4463         }
4464
4465         rc = true;
4466 out:
4467         return rc;
4468 }
4469
4470 /* Verify the checksum for the firmware file. It is calculated from the version
4471  * field to the end of the file. Compare the result with the checksum field to
4472  * make sure the file is correct.
4473  */
4474 static long rtl8152_fw_verify_checksum(struct r8152 *tp,
4475                                        struct fw_header *fw_hdr, size_t size)
4476 {
4477         unsigned char checksum[sizeof(fw_hdr->checksum)];
4478         struct crypto_shash *alg;
4479         struct shash_desc *sdesc;
4480         size_t len;
4481         long rc;
4482
4483         alg = crypto_alloc_shash("sha256", 0, 0);
4484         if (IS_ERR(alg)) {
4485                 rc = PTR_ERR(alg);
4486                 goto out;
4487         }
4488
4489         if (crypto_shash_digestsize(alg) != sizeof(fw_hdr->checksum)) {
4490                 rc = -EFAULT;
4491                 dev_err(&tp->intf->dev, "digestsize incorrect (%u)\n",
4492                         crypto_shash_digestsize(alg));
4493                 goto free_shash;
4494         }
4495
4496         len = sizeof(*sdesc) + crypto_shash_descsize(alg);
4497         sdesc = kmalloc(len, GFP_KERNEL);
4498         if (!sdesc) {
4499                 rc = -ENOMEM;
4500                 goto free_shash;
4501         }
4502         sdesc->tfm = alg;
4503
4504         len = size - sizeof(fw_hdr->checksum);
4505         rc = crypto_shash_digest(sdesc, fw_hdr->version, len, checksum);
4506         kfree(sdesc);
4507         if (rc)
4508                 goto free_shash;
4509
4510         if (memcmp(fw_hdr->checksum, checksum, sizeof(fw_hdr->checksum))) {
4511                 dev_err(&tp->intf->dev, "checksum fail\n");
4512                 rc = -EFAULT;
4513         }
4514
4515 free_shash:
4516         crypto_free_shash(alg);
4517 out:
4518         return rc;
4519 }
4520
4521 static long rtl8152_check_firmware(struct r8152 *tp, struct rtl_fw *rtl_fw)
4522 {
4523         const struct firmware *fw = rtl_fw->fw;
4524         struct fw_header *fw_hdr = (struct fw_header *)fw->data;
4525         unsigned long fw_flags = 0;
4526         long ret = -EFAULT;
4527         int i;
4528
4529         if (fw->size < sizeof(*fw_hdr)) {
4530                 dev_err(&tp->intf->dev, "file too small\n");
4531                 goto fail;
4532         }
4533
4534         ret = rtl8152_fw_verify_checksum(tp, fw_hdr, fw->size);
4535         if (ret)
4536                 goto fail;
4537
4538         ret = -EFAULT;
4539
4540         for (i = sizeof(*fw_hdr); i < fw->size;) {
4541                 struct fw_block *block = (struct fw_block *)&fw->data[i];
4542                 u32 type;
4543
4544                 if ((i + sizeof(*block)) > fw->size)
4545                         goto fail;
4546
4547                 type = __le32_to_cpu(block->type);
4548                 switch (type) {
4549                 case RTL_FW_END:
4550                         if (__le32_to_cpu(block->length) != sizeof(*block))
4551                                 goto fail;
4552                         goto fw_end;
4553                 case RTL_FW_PLA:
4554                         if (test_bit(FW_FLAGS_PLA, &fw_flags)) {
4555                                 dev_err(&tp->intf->dev,
4556                                         "multiple PLA firmware encountered");
4557                                 goto fail;
4558                         }
4559
4560                         if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
4561                                 dev_err(&tp->intf->dev,
4562                                         "check PLA firmware failed\n");
4563                                 goto fail;
4564                         }
4565                         __set_bit(FW_FLAGS_PLA, &fw_flags);
4566                         break;
4567                 case RTL_FW_USB:
4568                         if (test_bit(FW_FLAGS_USB, &fw_flags)) {
4569                                 dev_err(&tp->intf->dev,
4570                                         "multiple USB firmware encountered");
4571                                 goto fail;
4572                         }
4573
4574                         if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
4575                                 dev_err(&tp->intf->dev,
4576                                         "check USB firmware failed\n");
4577                                 goto fail;
4578                         }
4579                         __set_bit(FW_FLAGS_USB, &fw_flags);
4580                         break;
4581                 case RTL_FW_PHY_START:
4582                         if (test_bit(FW_FLAGS_START, &fw_flags) ||
4583                             test_bit(FW_FLAGS_NC, &fw_flags) ||
4584                             test_bit(FW_FLAGS_NC1, &fw_flags) ||
4585                             test_bit(FW_FLAGS_NC2, &fw_flags) ||
4586                             test_bit(FW_FLAGS_UC2, &fw_flags) ||
4587                             test_bit(FW_FLAGS_UC, &fw_flags) ||
4588                             test_bit(FW_FLAGS_STOP, &fw_flags)) {
4589                                 dev_err(&tp->intf->dev,
4590                                         "check PHY_START fail\n");
4591                                 goto fail;
4592                         }
4593
4594                         if (__le32_to_cpu(block->length) != sizeof(struct fw_phy_patch_key)) {
4595                                 dev_err(&tp->intf->dev,
4596                                         "Invalid length for PHY_START\n");
4597                                 goto fail;
4598                         }
4599                         __set_bit(FW_FLAGS_START, &fw_flags);
4600                         break;
4601                 case RTL_FW_PHY_STOP:
4602                         if (test_bit(FW_FLAGS_STOP, &fw_flags) ||
4603                             !test_bit(FW_FLAGS_START, &fw_flags)) {
4604                                 dev_err(&tp->intf->dev,
4605                                         "Check PHY_STOP fail\n");
4606                                 goto fail;
4607                         }
4608
4609                         if (__le32_to_cpu(block->length) != sizeof(*block)) {
4610                                 dev_err(&tp->intf->dev,
4611                                         "Invalid length for PHY_STOP\n");
4612                                 goto fail;
4613                         }
4614                         __set_bit(FW_FLAGS_STOP, &fw_flags);
4615                         break;
4616                 case RTL_FW_PHY_NC:
4617                         if (!test_bit(FW_FLAGS_START, &fw_flags) ||
4618                             test_bit(FW_FLAGS_STOP, &fw_flags)) {
4619                                 dev_err(&tp->intf->dev,
4620                                         "check PHY_NC fail\n");
4621                                 goto fail;
4622                         }
4623
4624                         if (test_bit(FW_FLAGS_NC, &fw_flags)) {
4625                                 dev_err(&tp->intf->dev,
4626                                         "multiple PHY NC encountered\n");
4627                                 goto fail;
4628                         }
4629
4630                         if (!rtl8152_is_fw_phy_nc_ok(tp, (struct fw_phy_nc *)block)) {
4631                                 dev_err(&tp->intf->dev,
4632                                         "check PHY NC firmware failed\n");
4633                                 goto fail;
4634                         }
4635                         __set_bit(FW_FLAGS_NC, &fw_flags);
4636                         break;
4637                 case RTL_FW_PHY_UNION_NC:
4638                         if (!test_bit(FW_FLAGS_START, &fw_flags) ||
4639                             test_bit(FW_FLAGS_NC1, &fw_flags) ||
4640                             test_bit(FW_FLAGS_NC2, &fw_flags) ||
4641                             test_bit(FW_FLAGS_UC2, &fw_flags) ||
4642                             test_bit(FW_FLAGS_UC, &fw_flags) ||
4643                             test_bit(FW_FLAGS_STOP, &fw_flags)) {
4644                                 dev_err(&tp->intf->dev, "PHY_UNION_NC out of order\n");
4645                                 goto fail;
4646                         }
4647
4648                         if (test_bit(FW_FLAGS_NC, &fw_flags)) {
4649                                 dev_err(&tp->intf->dev, "multiple PHY_UNION_NC encountered\n");
4650                                 goto fail;
4651                         }
4652
4653                         if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
4654                                 dev_err(&tp->intf->dev, "check PHY_UNION_NC failed\n");
4655                                 goto fail;
4656                         }
4657                         __set_bit(FW_FLAGS_NC, &fw_flags);
4658                         break;
4659                 case RTL_FW_PHY_UNION_NC1:
4660                         if (!test_bit(FW_FLAGS_START, &fw_flags) ||
4661                             test_bit(FW_FLAGS_NC2, &fw_flags) ||
4662                             test_bit(FW_FLAGS_UC2, &fw_flags) ||
4663                             test_bit(FW_FLAGS_UC, &fw_flags) ||
4664                             test_bit(FW_FLAGS_STOP, &fw_flags)) {
4665                                 dev_err(&tp->intf->dev, "PHY_UNION_NC1 out of order\n");
4666                                 goto fail;
4667                         }
4668
4669                         if (test_bit(FW_FLAGS_NC1, &fw_flags)) {
4670                                 dev_err(&tp->intf->dev, "multiple PHY NC1 encountered\n");
4671                                 goto fail;
4672                         }
4673
4674                         if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
4675                                 dev_err(&tp->intf->dev, "check PHY_UNION_NC1 failed\n");
4676                                 goto fail;
4677                         }
4678                         __set_bit(FW_FLAGS_NC1, &fw_flags);
4679                         break;
4680                 case RTL_FW_PHY_UNION_NC2:
4681                         if (!test_bit(FW_FLAGS_START, &fw_flags) ||
4682                             test_bit(FW_FLAGS_UC2, &fw_flags) ||
4683                             test_bit(FW_FLAGS_UC, &fw_flags) ||
4684                             test_bit(FW_FLAGS_STOP, &fw_flags)) {
4685                                 dev_err(&tp->intf->dev, "PHY_UNION_NC2 out of order\n");
4686                                 goto fail;
4687                         }
4688
4689                         if (test_bit(FW_FLAGS_NC2, &fw_flags)) {
4690                                 dev_err(&tp->intf->dev, "multiple PHY NC2 encountered\n");
4691                                 goto fail;
4692                         }
4693
4694                         if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
4695                                 dev_err(&tp->intf->dev, "check PHY_UNION_NC2 failed\n");
4696                                 goto fail;
4697                         }
4698                         __set_bit(FW_FLAGS_NC2, &fw_flags);
4699                         break;
4700                 case RTL_FW_PHY_UNION_UC2:
4701                         if (!test_bit(FW_FLAGS_START, &fw_flags) ||
4702                             test_bit(FW_FLAGS_UC, &fw_flags) ||
4703                             test_bit(FW_FLAGS_STOP, &fw_flags)) {
4704                                 dev_err(&tp->intf->dev, "PHY_UNION_UC2 out of order\n");
4705                                 goto fail;
4706                         }
4707
4708                         if (test_bit(FW_FLAGS_UC2, &fw_flags)) {
4709                                 dev_err(&tp->intf->dev, "multiple PHY UC2 encountered\n");
4710                                 goto fail;
4711                         }
4712
4713                         if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
4714                                 dev_err(&tp->intf->dev, "check PHY_UNION_UC2 failed\n");
4715                                 goto fail;
4716                         }
4717                         __set_bit(FW_FLAGS_UC2, &fw_flags);
4718                         break;
4719                 case RTL_FW_PHY_UNION_UC:
4720                         if (!test_bit(FW_FLAGS_START, &fw_flags) ||
4721                             test_bit(FW_FLAGS_STOP, &fw_flags)) {
4722                                 dev_err(&tp->intf->dev, "PHY_UNION_UC out of order\n");
4723                                 goto fail;
4724                         }
4725
4726                         if (test_bit(FW_FLAGS_UC, &fw_flags)) {
4727                                 dev_err(&tp->intf->dev, "multiple PHY UC encountered\n");
4728                                 goto fail;
4729                         }
4730
4731                         if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
4732                                 dev_err(&tp->intf->dev, "check PHY_UNION_UC failed\n");
4733                                 goto fail;
4734                         }
4735                         __set_bit(FW_FLAGS_UC, &fw_flags);
4736                         break;
4737                 case RTL_FW_PHY_UNION_MISC:
4738                         if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
4739                                 dev_err(&tp->intf->dev, "check RTL_FW_PHY_UNION_MISC failed\n");
4740                                 goto fail;
4741                         }
4742                         break;
4743                 case RTL_FW_PHY_FIXUP:
4744                         if (!rtl8152_is_fw_phy_fixup_ok(tp, (struct fw_phy_fixup *)block)) {
4745                                 dev_err(&tp->intf->dev, "check PHY fixup failed\n");
4746                                 goto fail;
4747                         }
4748                         break;
4749                 case RTL_FW_PHY_SPEED_UP:
4750                         if (test_bit(FW_FLAGS_SPEED_UP, &fw_flags)) {
4751                                 dev_err(&tp->intf->dev, "multiple PHY firmware encountered");
4752                                 goto fail;
4753                         }
4754
4755                         if (!rtl8152_is_fw_phy_speed_up_ok(tp, (struct fw_phy_speed_up *)block)) {
4756                                 dev_err(&tp->intf->dev, "check PHY speed up failed\n");
4757                                 goto fail;
4758                         }
4759                         __set_bit(FW_FLAGS_SPEED_UP, &fw_flags);
4760                         break;
4761                 case RTL_FW_PHY_VER:
4762                         if (test_bit(FW_FLAGS_START, &fw_flags) ||
4763                             test_bit(FW_FLAGS_NC, &fw_flags) ||
4764                             test_bit(FW_FLAGS_NC1, &fw_flags) ||
4765                             test_bit(FW_FLAGS_NC2, &fw_flags) ||
4766                             test_bit(FW_FLAGS_UC2, &fw_flags) ||
4767                             test_bit(FW_FLAGS_UC, &fw_flags) ||
4768                             test_bit(FW_FLAGS_STOP, &fw_flags)) {
4769                                 dev_err(&tp->intf->dev, "Invalid order to set PHY version\n");
4770                                 goto fail;
4771                         }
4772
4773                         if (test_bit(FW_FLAGS_VER, &fw_flags)) {
4774                                 dev_err(&tp->intf->dev, "multiple PHY version encountered");
4775                                 goto fail;
4776                         }
4777
4778                         if (!rtl8152_is_fw_phy_ver_ok(tp, (struct fw_phy_ver *)block)) {
4779                                 dev_err(&tp->intf->dev, "check PHY version failed\n");
4780                                 goto fail;
4781                         }
4782                         __set_bit(FW_FLAGS_VER, &fw_flags);
4783                         break;
4784                 default:
4785                         dev_warn(&tp->intf->dev, "Unknown type %u is found\n",
4786                                  type);
4787                         break;
4788                 }
4789
4790                 /* next block */
4791                 i += ALIGN(__le32_to_cpu(block->length), 8);
4792         }
4793
4794 fw_end:
4795         if (test_bit(FW_FLAGS_START, &fw_flags) && !test_bit(FW_FLAGS_STOP, &fw_flags)) {
4796                 dev_err(&tp->intf->dev, "without PHY_STOP\n");
4797                 goto fail;
4798         }
4799
4800         return 0;
4801 fail:
4802         return ret;
4803 }
4804
4805 static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy, bool wait)
4806 {
4807         u32 len;
4808         u8 *data;
4809
4810         rtl_reset_ocp_base(tp);
4811
4812         if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) {
4813                 dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
4814                 return;
4815         }
4816
4817         len = __le32_to_cpu(phy->blk_hdr.length);
4818         len -= __le16_to_cpu(phy->fw_offset);
4819         data = (u8 *)phy + __le16_to_cpu(phy->fw_offset);
4820
4821         if (rtl_phy_patch_request(tp, true, wait))
4822                 return;
4823
4824         while (len) {
4825                 u32 ocp_data, size;
4826                 int i;
4827
4828                 if (len < 2048)
4829                         size = len;
4830                 else
4831                         size = 2048;
4832
4833                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL);
4834                 ocp_data |= GPHY_PATCH_DONE | BACKUP_RESTRORE;
4835                 ocp_write_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL, ocp_data);
4836
4837                 generic_ocp_write(tp, __le16_to_cpu(phy->fw_reg), 0xff, size, data, MCU_TYPE_USB);
4838
4839                 data += size;
4840                 len -= size;
4841
4842                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL);
4843                 ocp_data |= POL_GPHY_PATCH;
4844                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL, ocp_data);
4845
4846                 for (i = 0; i < 1000; i++) {
4847                         if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & POL_GPHY_PATCH))
4848                                 break;
4849                 }
4850
4851                 if (i == 1000) {
4852                         dev_err(&tp->intf->dev, "ram code speedup mode timeout\n");
4853                         break;
4854                 }
4855         }
4856
4857         rtl_reset_ocp_base(tp);
4858
4859         rtl_phy_patch_request(tp, false, wait);
4860
4861         if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version))
4862                 dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
4863         else
4864                 dev_err(&tp->intf->dev, "ram code speedup mode fail\n");
4865 }
4866
4867 static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver)
4868 {
4869         u16 ver_addr, ver;
4870
4871         ver_addr = __le16_to_cpu(phy_ver->ver.addr);
4872         ver = __le16_to_cpu(phy_ver->ver.data);
4873
4874         rtl_reset_ocp_base(tp);
4875
4876         if (sram_read(tp, ver_addr) >= ver) {
4877                 dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
4878                 return 0;
4879         }
4880
4881         sram_write(tp, ver_addr, ver);
4882
4883         dev_dbg(&tp->intf->dev, "PHY firmware version %x\n", ver);
4884
4885         return ver;
4886 }
4887
4888 static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix)
4889 {
4890         u16 addr, data;
4891
4892         rtl_reset_ocp_base(tp);
4893
4894         addr = __le16_to_cpu(fix->setting.addr);
4895         data = ocp_reg_read(tp, addr);
4896
4897         switch (__le16_to_cpu(fix->bit_cmd)) {
4898         case FW_FIXUP_AND:
4899                 data &= __le16_to_cpu(fix->setting.data);
4900                 break;
4901         case FW_FIXUP_OR:
4902                 data |= __le16_to_cpu(fix->setting.data);
4903                 break;
4904         case FW_FIXUP_NOT:
4905                 data &= ~__le16_to_cpu(fix->setting.data);
4906                 break;
4907         case FW_FIXUP_XOR:
4908                 data ^= __le16_to_cpu(fix->setting.data);
4909                 break;
4910         default:
4911                 return;
4912         }
4913
4914         ocp_reg_write(tp, addr, data);
4915
4916         dev_dbg(&tp->intf->dev, "applied ocp %x %x\n", addr, data);
4917 }
4918
4919 static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *phy)
4920 {
4921         __le16 *data;
4922         u32 length;
4923         int i, num;
4924
4925         rtl_reset_ocp_base(tp);
4926
4927         num = phy->pre_num;
4928         for (i = 0; i < num; i++)
4929                 sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr),
4930                            __le16_to_cpu(phy->pre_set[i].data));
4931
4932         length = __le32_to_cpu(phy->blk_hdr.length);
4933         length -= __le16_to_cpu(phy->fw_offset);
4934         num = length / 2;
4935         data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
4936
4937         ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
4938         for (i = 0; i < num; i++)
4939                 ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
4940
4941         num = phy->bp_num;
4942         for (i = 0; i < num; i++)
4943                 sram_write(tp, __le16_to_cpu(phy->bp[i].addr), __le16_to_cpu(phy->bp[i].data));
4944
4945         if (phy->bp_num && phy->bp_en.addr)
4946                 sram_write(tp, __le16_to_cpu(phy->bp_en.addr), __le16_to_cpu(phy->bp_en.data));
4947
4948         dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
4949 }
4950
4951 static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
4952 {
4953         u16 mode_reg, bp_index;
4954         u32 length, i, num;
4955         __le16 *data;
4956
4957         rtl_reset_ocp_base(tp);
4958
4959         mode_reg = __le16_to_cpu(phy->mode_reg);
4960         sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_pre));
4961         sram_write(tp, __le16_to_cpu(phy->ba_reg),
4962                    __le16_to_cpu(phy->ba_data));
4963
4964         length = __le32_to_cpu(phy->blk_hdr.length);
4965         length -= __le16_to_cpu(phy->fw_offset);
4966         num = length / 2;
4967         data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
4968
4969         ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
4970         for (i = 0; i < num; i++)
4971                 ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
4972
4973         sram_write(tp, __le16_to_cpu(phy->patch_en_addr),
4974                    __le16_to_cpu(phy->patch_en_value));
4975
4976         bp_index = __le16_to_cpu(phy->bp_start);
4977         num = __le16_to_cpu(phy->bp_num);
4978         for (i = 0; i < num; i++) {
4979                 sram_write(tp, bp_index, __le16_to_cpu(phy->bp[i]));
4980                 bp_index += 2;
4981         }
4982
4983         sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_post));
4984
4985         dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
4986 }
4987
4988 static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
4989 {
4990         u16 bp_en_addr, type, fw_ver_reg;
4991         u32 length;
4992         u8 *data;
4993
4994         switch (__le32_to_cpu(mac->blk_hdr.type)) {
4995         case RTL_FW_PLA:
4996                 type = MCU_TYPE_PLA;
4997                 break;
4998         case RTL_FW_USB:
4999                 type = MCU_TYPE_USB;
5000                 break;
5001         default:
5002                 return;
5003         }
5004
5005         fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
5006         if (fw_ver_reg && ocp_read_byte(tp, MCU_TYPE_USB, fw_ver_reg) >= mac->fw_ver_data) {
5007                 dev_dbg(&tp->intf->dev, "%s firmware has been the newest\n", type ? "PLA" : "USB");
5008                 return;
5009         }
5010
5011         rtl_clear_bp(tp, type);
5012
5013         /* Enable backup/restore of MACDBG. This is required after clearing PLA
5014          * break points and before applying the PLA firmware.
5015          */
5016         if (tp->version == RTL_VER_04 && type == MCU_TYPE_PLA &&
5017             !(ocp_read_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST) & DEBUG_OE)) {
5018                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_PRE, DEBUG_LTSSM);
5019                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST, DEBUG_LTSSM);
5020         }
5021
5022         length = __le32_to_cpu(mac->blk_hdr.length);
5023         length -= __le16_to_cpu(mac->fw_offset);
5024
5025         data = (u8 *)mac;
5026         data += __le16_to_cpu(mac->fw_offset);
5027
5028         generic_ocp_write(tp, __le16_to_cpu(mac->fw_reg), 0xff, length, data,
5029                           type);
5030
5031         ocp_write_word(tp, type, __le16_to_cpu(mac->bp_ba_addr),
5032                        __le16_to_cpu(mac->bp_ba_value));
5033
5034         generic_ocp_write(tp, __le16_to_cpu(mac->bp_start), BYTE_EN_DWORD,
5035                           __le16_to_cpu(mac->bp_num) << 1, mac->bp, type);
5036
5037         bp_en_addr = __le16_to_cpu(mac->bp_en_addr);
5038         if (bp_en_addr)
5039                 ocp_write_word(tp, type, bp_en_addr,
5040                                __le16_to_cpu(mac->bp_en_value));
5041
5042         if (fw_ver_reg)
5043                 ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
5044                                mac->fw_ver_data);
5045
5046         dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
5047 }
5048
5049 static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut)
5050 {
5051         struct rtl_fw *rtl_fw = &tp->rtl_fw;
5052         const struct firmware *fw;
5053         struct fw_header *fw_hdr;
5054         struct fw_phy_patch_key *key;
5055         u16 key_addr = 0;
5056         int i, patch_phy = 1;
5057
5058         if (IS_ERR_OR_NULL(rtl_fw->fw))
5059                 return;
5060
5061         fw = rtl_fw->fw;
5062         fw_hdr = (struct fw_header *)fw->data;
5063
5064         if (rtl_fw->pre_fw)
5065                 rtl_fw->pre_fw(tp);
5066
5067         for (i = offsetof(struct fw_header, blocks); i < fw->size;) {
5068                 struct fw_block *block = (struct fw_block *)&fw->data[i];
5069
5070                 switch (__le32_to_cpu(block->type)) {
5071                 case RTL_FW_END:
5072                         goto post_fw;
5073                 case RTL_FW_PLA:
5074                 case RTL_FW_USB:
5075                         rtl8152_fw_mac_apply(tp, (struct fw_mac *)block);
5076                         break;
5077                 case RTL_FW_PHY_START:
5078                         if (!patch_phy)
5079                                 break;
5080                         key = (struct fw_phy_patch_key *)block;
5081                         key_addr = __le16_to_cpu(key->key_reg);
5082                         rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut);
5083                         break;
5084                 case RTL_FW_PHY_STOP:
5085                         if (!patch_phy)
5086                                 break;
5087                         WARN_ON(!key_addr);
5088                         rtl_post_ram_code(tp, key_addr, !power_cut);
5089                         break;
5090                 case RTL_FW_PHY_NC:
5091                         rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
5092                         break;
5093                 case RTL_FW_PHY_VER:
5094                         patch_phy = rtl8152_fw_phy_ver(tp, (struct fw_phy_ver *)block);
5095                         break;
5096                 case RTL_FW_PHY_UNION_NC:
5097                 case RTL_FW_PHY_UNION_NC1:
5098                 case RTL_FW_PHY_UNION_NC2:
5099                 case RTL_FW_PHY_UNION_UC2:
5100                 case RTL_FW_PHY_UNION_UC:
5101                 case RTL_FW_PHY_UNION_MISC:
5102                         if (patch_phy)
5103                                 rtl8152_fw_phy_union_apply(tp, (struct fw_phy_union *)block);
5104                         break;
5105                 case RTL_FW_PHY_FIXUP:
5106                         if (patch_phy)
5107                                 rtl8152_fw_phy_fixup(tp, (struct fw_phy_fixup *)block);
5108                         break;
5109                 case RTL_FW_PHY_SPEED_UP:
5110                         rtl_ram_code_speed_up(tp, (struct fw_phy_speed_up *)block, !power_cut);
5111                         break;
5112                 default:
5113                         break;
5114                 }
5115
5116                 i += ALIGN(__le32_to_cpu(block->length), 8);
5117         }
5118
5119 post_fw:
5120         if (rtl_fw->post_fw)
5121                 rtl_fw->post_fw(tp);
5122
5123         rtl_reset_ocp_base(tp);
5124         strscpy(rtl_fw->version, fw_hdr->version, RTL_VER_SIZE);
5125         dev_info(&tp->intf->dev, "load %s successfully\n", rtl_fw->version);
5126 }
5127
5128 static void rtl8152_release_firmware(struct r8152 *tp)
5129 {
5130         struct rtl_fw *rtl_fw = &tp->rtl_fw;
5131
5132         if (!IS_ERR_OR_NULL(rtl_fw->fw)) {
5133                 release_firmware(rtl_fw->fw);
5134                 rtl_fw->fw = NULL;
5135         }
5136 }
5137
5138 static int rtl8152_request_firmware(struct r8152 *tp)
5139 {
5140         struct rtl_fw *rtl_fw = &tp->rtl_fw;
5141         long rc;
5142
5143         if (rtl_fw->fw || !rtl_fw->fw_name) {
5144                 dev_info(&tp->intf->dev, "skip request firmware\n");
5145                 rc = 0;
5146                 goto result;
5147         }
5148
5149         rc = request_firmware(&rtl_fw->fw, rtl_fw->fw_name, &tp->intf->dev);
5150         if (rc < 0)
5151                 goto result;
5152
5153         rc = rtl8152_check_firmware(tp, rtl_fw);
5154         if (rc < 0)
5155                 release_firmware(rtl_fw->fw);
5156
5157 result:
5158         if (rc) {
5159                 rtl_fw->fw = ERR_PTR(rc);
5160
5161                 dev_warn(&tp->intf->dev,
5162                          "unable to load firmware patch %s (%ld)\n",
5163                          rtl_fw->fw_name, rc);
5164         }
5165
5166         return rc;
5167 }
5168
5169 static void r8152_aldps_en(struct r8152 *tp, bool enable)
5170 {
5171         if (enable) {
5172                 ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
5173                                                     LINKENA | DIS_SDSAVE);
5174         } else {
5175                 ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA |
5176                                                     DIS_SDSAVE);
5177                 msleep(20);
5178         }
5179 }
5180
5181 static inline void r8152_mmd_indirect(struct r8152 *tp, u16 dev, u16 reg)
5182 {
5183         ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | dev);
5184         ocp_reg_write(tp, OCP_EEE_DATA, reg);
5185         ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | dev);
5186 }
5187
5188 static u16 r8152_mmd_read(struct r8152 *tp, u16 dev, u16 reg)
5189 {
5190         u16 data;
5191
5192         r8152_mmd_indirect(tp, dev, reg);
5193         data = ocp_reg_read(tp, OCP_EEE_DATA);
5194         ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
5195
5196         return data;
5197 }
5198
5199 static void r8152_mmd_write(struct r8152 *tp, u16 dev, u16 reg, u16 data)
5200 {
5201         r8152_mmd_indirect(tp, dev, reg);
5202         ocp_reg_write(tp, OCP_EEE_DATA, data);
5203         ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
5204 }
5205
5206 static void r8152_eee_en(struct r8152 *tp, bool enable)
5207 {
5208         u16 config1, config2, config3;
5209         u32 ocp_data;
5210
5211         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
5212         config1 = ocp_reg_read(tp, OCP_EEE_CONFIG1) & ~sd_rise_time_mask;
5213         config2 = ocp_reg_read(tp, OCP_EEE_CONFIG2);
5214         config3 = ocp_reg_read(tp, OCP_EEE_CONFIG3) & ~fast_snr_mask;
5215
5216         if (enable) {
5217                 ocp_data |= EEE_RX_EN | EEE_TX_EN;
5218                 config1 |= EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | RX_QUIET_EN;
5219                 config1 |= sd_rise_time(1);
5220                 config2 |= RG_DACQUIET_EN | RG_LDVQUIET_EN;
5221                 config3 |= fast_snr(42);
5222         } else {
5223                 ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
5224                 config1 &= ~(EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN |
5225                              RX_QUIET_EN);
5226                 config1 |= sd_rise_time(7);
5227                 config2 &= ~(RG_DACQUIET_EN | RG_LDVQUIET_EN);
5228                 config3 |= fast_snr(511);
5229         }
5230
5231         ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
5232         ocp_reg_write(tp, OCP_EEE_CONFIG1, config1);
5233         ocp_reg_write(tp, OCP_EEE_CONFIG2, config2);
5234         ocp_reg_write(tp, OCP_EEE_CONFIG3, config3);
5235 }
5236
5237 static void r8153_eee_en(struct r8152 *tp, bool enable)
5238 {
5239         u32 ocp_data;
5240         u16 config;
5241
5242         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
5243         config = ocp_reg_read(tp, OCP_EEE_CFG);
5244
5245         if (enable) {
5246                 ocp_data |= EEE_RX_EN | EEE_TX_EN;
5247                 config |= EEE10_EN;
5248         } else {
5249                 ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
5250                 config &= ~EEE10_EN;
5251         }
5252
5253         ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
5254         ocp_reg_write(tp, OCP_EEE_CFG, config);
5255
5256         tp->ups_info.eee = enable;
5257 }
5258
5259 static void r8156_eee_en(struct r8152 *tp, bool enable)
5260 {
5261         u16 config;
5262
5263         r8153_eee_en(tp, enable);
5264
5265         config = ocp_reg_read(tp, OCP_EEE_ADV2);
5266
5267         if (enable)
5268                 config |= MDIO_EEE_2_5GT;
5269         else
5270                 config &= ~MDIO_EEE_2_5GT;
5271
5272         ocp_reg_write(tp, OCP_EEE_ADV2, config);
5273 }
5274
5275 static void rtl_eee_enable(struct r8152 *tp, bool enable)
5276 {
5277         switch (tp->version) {
5278         case RTL_VER_01:
5279         case RTL_VER_02:
5280         case RTL_VER_07:
5281                 if (enable) {
5282                         r8152_eee_en(tp, true);
5283                         r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
5284                                         tp->eee_adv);
5285                 } else {
5286                         r8152_eee_en(tp, false);
5287                         r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
5288                 }
5289                 break;
5290         case RTL_VER_03:
5291         case RTL_VER_04:
5292         case RTL_VER_05:
5293         case RTL_VER_06:
5294         case RTL_VER_08:
5295         case RTL_VER_09:
5296         case RTL_VER_14:
5297                 if (enable) {
5298                         r8153_eee_en(tp, true);
5299                         ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
5300                 } else {
5301                         r8153_eee_en(tp, false);
5302                         ocp_reg_write(tp, OCP_EEE_ADV, 0);
5303                 }
5304                 break;
5305         case RTL_VER_10:
5306         case RTL_VER_11:
5307         case RTL_VER_12:
5308         case RTL_VER_13:
5309         case RTL_VER_15:
5310                 if (enable) {
5311                         r8156_eee_en(tp, true);
5312                         ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
5313                 } else {
5314                         r8156_eee_en(tp, false);
5315                         ocp_reg_write(tp, OCP_EEE_ADV, 0);
5316                 }
5317                 break;
5318         default:
5319                 break;
5320         }
5321 }
5322
5323 static void r8152b_enable_fc(struct r8152 *tp)
5324 {
5325         u16 anar;
5326
5327         anar = r8152_mdio_read(tp, MII_ADVERTISE);
5328         anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
5329         r8152_mdio_write(tp, MII_ADVERTISE, anar);
5330
5331         tp->ups_info.flow_control = true;
5332 }
5333
5334 static void rtl8152_disable(struct r8152 *tp)
5335 {
5336         r8152_aldps_en(tp, false);
5337         rtl_disable(tp);
5338         r8152_aldps_en(tp, true);
5339 }
5340
5341 static void r8152b_hw_phy_cfg(struct r8152 *tp)
5342 {
5343         rtl8152_apply_firmware(tp, false);
5344         rtl_eee_enable(tp, tp->eee_en);
5345         r8152_aldps_en(tp, true);
5346         r8152b_enable_fc(tp);
5347
5348         set_bit(PHY_RESET, &tp->flags);
5349 }
5350
5351 static void wait_oob_link_list_ready(struct r8152 *tp)
5352 {
5353         u32 ocp_data;
5354         int i;
5355
5356         for (i = 0; i < 1000; i++) {
5357                 ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
5358                 if (ocp_data & LINK_LIST_READY)
5359                         break;
5360                 usleep_range(1000, 2000);
5361         }
5362 }
5363
5364 static void r8156b_wait_loading_flash(struct r8152 *tp)
5365 {
5366         if ((ocp_read_word(tp, MCU_TYPE_PLA, PLA_GPHY_CTRL) & GPHY_FLASH) &&
5367             !(ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & BYPASS_FLASH)) {
5368                 int i;
5369
5370                 for (i = 0; i < 100; i++) {
5371                         if (ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & GPHY_PATCH_DONE)
5372                                 break;
5373                         usleep_range(1000, 2000);
5374                 }
5375         }
5376 }
5377
5378 static void r8152b_exit_oob(struct r8152 *tp)
5379 {
5380         u32 ocp_data;
5381
5382         ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
5383         ocp_data &= ~RCR_ACPT_ALL;
5384         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
5385
5386         rxdy_gated_en(tp, true);
5387         r8153_teredo_off(tp);
5388         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
5389         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
5390
5391         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
5392         ocp_data &= ~NOW_IS_OOB;
5393         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
5394
5395         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
5396         ocp_data &= ~MCU_BORW_EN;
5397         ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
5398
5399         wait_oob_link_list_ready(tp);
5400
5401         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
5402         ocp_data |= RE_INIT_LL;
5403         ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
5404
5405         wait_oob_link_list_ready(tp);
5406
5407         rtl8152_nic_reset(tp);
5408
5409         /* rx share fifo credit full threshold */
5410         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
5411
5412         if (tp->udev->speed == USB_SPEED_FULL ||
5413             tp->udev->speed == USB_SPEED_LOW) {
5414                 /* rx share fifo credit near full threshold */
5415                 ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
5416                                 RXFIFO_THR2_FULL);
5417                 ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
5418                                 RXFIFO_THR3_FULL);
5419         } else {
5420                 /* rx share fifo credit near full threshold */
5421                 ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
5422                                 RXFIFO_THR2_HIGH);
5423                 ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
5424                                 RXFIFO_THR3_HIGH);
5425         }
5426
5427         /* TX share fifo free credit full threshold */
5428         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
5429
5430         ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
5431         ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
5432         ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA,
5433                         TEST_MODE_DISABLE | TX_SIZE_ADJUST1);
5434
5435         rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
5436
5437         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
5438
5439         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
5440         ocp_data |= TCR0_AUTO_FIFO;
5441         ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
5442 }
5443
5444 static void r8152b_enter_oob(struct r8152 *tp)
5445 {
5446         u32 ocp_data;
5447
5448         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
5449         ocp_data &= ~NOW_IS_OOB;
5450         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
5451
5452         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
5453         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
5454         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
5455
5456         rtl_disable(tp);
5457
5458         wait_oob_link_list_ready(tp);
5459
5460         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
5461         ocp_data |= RE_INIT_LL;
5462         ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
5463
5464         wait_oob_link_list_ready(tp);
5465
5466         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
5467
5468         rtl_rx_vlan_en(tp, true);
5469
5470         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR);
5471         ocp_data |= ALDPS_PROXY_MODE;
5472         ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data);
5473
5474         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
5475         ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
5476         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
5477
5478         rxdy_gated_en(tp, false);
5479
5480         ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
5481         ocp_data |= RCR_APM | RCR_AM | RCR_AB;
5482         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
5483 }
5484
5485 static int r8153_pre_firmware_1(struct r8152 *tp)
5486 {
5487         int i;
5488
5489         /* Wait till the WTD timer is ready. It would take at most 104 ms. */
5490         for (i = 0; i < 104; i++) {
5491                 u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL);
5492
5493                 if (!(ocp_data & WTD1_EN))
5494                         break;
5495                 usleep_range(1000, 2000);
5496         }
5497
5498         return 0;
5499 }
5500
5501 static int r8153_post_firmware_1(struct r8152 *tp)
5502 {
5503         /* set USB_BP_4 to support USB_SPEED_SUPER only */
5504         if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER)
5505                 ocp_write_word(tp, MCU_TYPE_USB, USB_BP_4, BP4_SUPER_ONLY);
5506
5507         /* reset UPHY timer to 36 ms */
5508         ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
5509
5510         return 0;
5511 }
5512
5513 static int r8153_pre_firmware_2(struct r8152 *tp)
5514 {
5515         u32 ocp_data;
5516
5517         r8153_pre_firmware_1(tp);
5518
5519         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
5520         ocp_data &= ~FW_FIX_SUSPEND;
5521         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
5522
5523         return 0;
5524 }
5525
5526 static int r8153_post_firmware_2(struct r8152 *tp)
5527 {
5528         u32 ocp_data;
5529
5530         /* enable bp0 if support USB_SPEED_SUPER only */
5531         if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER) {
5532                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
5533                 ocp_data |= BIT(0);
5534                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
5535         }
5536
5537         /* reset UPHY timer to 36 ms */
5538         ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
5539
5540         /* enable U3P3 check, set the counter to 4 */
5541         ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, U3P3_CHECK_EN | 4);
5542
5543         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
5544         ocp_data |= FW_FIX_SUSPEND;
5545         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
5546
5547         ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
5548         ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
5549         ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
5550
5551         return 0;
5552 }
5553
5554 static int r8153_post_firmware_3(struct r8152 *tp)
5555 {
5556         u32 ocp_data;
5557
5558         ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
5559         ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
5560         ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
5561
5562         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
5563         ocp_data |= FW_IP_RESET_EN;
5564         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
5565
5566         return 0;
5567 }
5568
5569 static int r8153b_pre_firmware_1(struct r8152 *tp)
5570 {
5571         /* enable fc timer and set timer to 1 second. */
5572         ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
5573                        CTRL_TIMER_EN | (1000 / 8));
5574
5575         return 0;
5576 }
5577
5578 static int r8153b_post_firmware_1(struct r8152 *tp)
5579 {
5580         u32 ocp_data;
5581
5582         /* enable bp0 for RTL8153-BND */
5583         ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
5584         if (ocp_data & BND_MASK) {
5585                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
5586                 ocp_data |= BIT(0);
5587                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
5588         }
5589
5590         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
5591         ocp_data |= FLOW_CTRL_PATCH_OPT;
5592         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
5593
5594         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
5595         ocp_data |= FC_PATCH_TASK;
5596         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
5597
5598         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
5599         ocp_data |= FW_IP_RESET_EN;
5600         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
5601
5602         return 0;
5603 }
5604
5605 static int r8153c_post_firmware_1(struct r8152 *tp)
5606 {
5607         u32 ocp_data;
5608
5609         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
5610         ocp_data |= FLOW_CTRL_PATCH_2;
5611         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
5612
5613         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
5614         ocp_data |= FC_PATCH_TASK;
5615         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
5616
5617         return 0;
5618 }
5619
5620 static int r8156a_post_firmware_1(struct r8152 *tp)
5621 {
5622         u32 ocp_data;
5623
5624         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
5625         ocp_data |= FW_IP_RESET_EN;
5626         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
5627
5628         /* Modify U3PHY parameter for compatibility issue */
5629         ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4026840e);
5630         ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4001acc9);
5631
5632         return 0;
5633 }
5634
5635 static void r8153_aldps_en(struct r8152 *tp, bool enable)
5636 {
5637         u16 data;
5638
5639         data = ocp_reg_read(tp, OCP_POWER_CFG);
5640         if (enable) {
5641                 data |= EN_ALDPS;
5642                 ocp_reg_write(tp, OCP_POWER_CFG, data);
5643         } else {
5644                 int i;
5645
5646                 data &= ~EN_ALDPS;
5647                 ocp_reg_write(tp, OCP_POWER_CFG, data);
5648                 for (i = 0; i < 20; i++) {
5649                         usleep_range(1000, 2000);
5650                         if (ocp_read_word(tp, MCU_TYPE_PLA, 0xe000) & 0x0100)
5651                                 break;
5652                 }
5653         }
5654
5655         tp->ups_info.aldps = enable;
5656 }
5657
5658 static void r8153_hw_phy_cfg(struct r8152 *tp)
5659 {
5660         u32 ocp_data;
5661         u16 data;
5662
5663         /* disable ALDPS before updating the PHY parameters */
5664         r8153_aldps_en(tp, false);
5665
5666         /* disable EEE before updating the PHY parameters */
5667         rtl_eee_enable(tp, false);
5668
5669         rtl8152_apply_firmware(tp, false);
5670
5671         if (tp->version == RTL_VER_03) {
5672                 data = ocp_reg_read(tp, OCP_EEE_CFG);
5673                 data &= ~CTAP_SHORT_EN;
5674                 ocp_reg_write(tp, OCP_EEE_CFG, data);
5675         }
5676
5677         data = ocp_reg_read(tp, OCP_POWER_CFG);
5678         data |= EEE_CLKDIV_EN;
5679         ocp_reg_write(tp, OCP_POWER_CFG, data);
5680
5681         data = ocp_reg_read(tp, OCP_DOWN_SPEED);
5682         data |= EN_10M_BGOFF;
5683         ocp_reg_write(tp, OCP_DOWN_SPEED, data);
5684         data = ocp_reg_read(tp, OCP_POWER_CFG);
5685         data |= EN_10M_PLLOFF;
5686         ocp_reg_write(tp, OCP_POWER_CFG, data);
5687         sram_write(tp, SRAM_IMPEDANCE, 0x0b13);
5688
5689         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
5690         ocp_data |= PFM_PWM_SWITCH;
5691         ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
5692
5693         /* Enable LPF corner auto tune */
5694         sram_write(tp, SRAM_LPF_CFG, 0xf70f);
5695
5696         /* Adjust 10M Amplitude */
5697         sram_write(tp, SRAM_10M_AMP1, 0x00af);
5698         sram_write(tp, SRAM_10M_AMP2, 0x0208);
5699
5700         if (tp->eee_en)
5701                 rtl_eee_enable(tp, true);
5702
5703         r8153_aldps_en(tp, true);
5704         r8152b_enable_fc(tp);
5705
5706         switch (tp->version) {
5707         case RTL_VER_03:
5708         case RTL_VER_04:
5709                 break;
5710         case RTL_VER_05:
5711         case RTL_VER_06:
5712         default:
5713                 r8153_u2p3en(tp, true);
5714                 break;
5715         }
5716
5717         set_bit(PHY_RESET, &tp->flags);
5718 }
5719
5720 static u32 r8152_efuse_read(struct r8152 *tp, u8 addr)
5721 {
5722         u32 ocp_data;
5723
5724         ocp_write_word(tp, MCU_TYPE_PLA, PLA_EFUSE_CMD, EFUSE_READ_CMD | addr);
5725         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EFUSE_CMD);
5726         ocp_data = (ocp_data & EFUSE_DATA_BIT16) << 9;  /* data of bit16 */
5727         ocp_data |= ocp_read_word(tp, MCU_TYPE_PLA, PLA_EFUSE_DATA);
5728
5729         return ocp_data;
5730 }
5731
5732 static void r8153b_hw_phy_cfg(struct r8152 *tp)
5733 {
5734         u32 ocp_data;
5735         u16 data;
5736
5737         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
5738         if (ocp_data & PCUT_STATUS) {
5739                 ocp_data &= ~PCUT_STATUS;
5740                 ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
5741         }
5742
5743         /* disable ALDPS before updating the PHY parameters */
5744         r8153_aldps_en(tp, false);
5745
5746         /* disable EEE before updating the PHY parameters */
5747         rtl_eee_enable(tp, false);
5748
5749         /* U1/U2/L1 idle timer. 500 us */
5750         ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
5751
5752         data = r8153_phy_status(tp, 0);
5753
5754         switch (data) {
5755         case PHY_STAT_PWRDN:
5756         case PHY_STAT_EXT_INIT:
5757                 rtl8152_apply_firmware(tp, true);
5758
5759                 data = r8152_mdio_read(tp, MII_BMCR);
5760                 data &= ~BMCR_PDOWN;
5761                 r8152_mdio_write(tp, MII_BMCR, data);
5762                 break;
5763         case PHY_STAT_LAN_ON:
5764         default:
5765                 rtl8152_apply_firmware(tp, false);
5766                 break;
5767         }
5768
5769         r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
5770
5771         data = sram_read(tp, SRAM_GREEN_CFG);
5772         data |= R_TUNE_EN;
5773         sram_write(tp, SRAM_GREEN_CFG, data);
5774         data = ocp_reg_read(tp, OCP_NCTL_CFG);
5775         data |= PGA_RETURN_EN;
5776         ocp_reg_write(tp, OCP_NCTL_CFG, data);
5777
5778         /* ADC Bias Calibration:
5779          * read efuse offset 0x7d to get a 17-bit data. Remove the dummy/fake
5780          * bit (bit3) to rebuild the real 16-bit data. Write the data to the
5781          * ADC ioffset.
5782          */
5783         ocp_data = r8152_efuse_read(tp, 0x7d);
5784         data = (u16)(((ocp_data & 0x1fff0) >> 1) | (ocp_data & 0x7));
5785         if (data != 0xffff)
5786                 ocp_reg_write(tp, OCP_ADC_IOFFSET, data);
5787
5788         /* ups mode tx-link-pulse timing adjustment:
5789          * rg_saw_cnt = OCP reg 0xC426 Bit[13:0]
5790          * swr_cnt_1ms_ini = 16000000 / rg_saw_cnt
5791          */
5792         ocp_data = ocp_reg_read(tp, 0xc426);
5793         ocp_data &= 0x3fff;
5794         if (ocp_data) {
5795                 u32 swr_cnt_1ms_ini;
5796
5797                 swr_cnt_1ms_ini = (16000000 / ocp_data) & SAW_CNT_1MS_MASK;
5798                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG);
5799                 ocp_data = (ocp_data & ~SAW_CNT_1MS_MASK) | swr_cnt_1ms_ini;
5800                 ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CFG, ocp_data);
5801         }
5802
5803         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
5804         ocp_data |= PFM_PWM_SWITCH;
5805         ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
5806
5807         /* Advnace EEE */
5808         if (!rtl_phy_patch_request(tp, true, true)) {
5809                 data = ocp_reg_read(tp, OCP_POWER_CFG);
5810                 data |= EEE_CLKDIV_EN;
5811                 ocp_reg_write(tp, OCP_POWER_CFG, data);
5812                 tp->ups_info.eee_ckdiv = true;
5813
5814                 data = ocp_reg_read(tp, OCP_DOWN_SPEED);
5815                 data |= EN_EEE_CMODE | EN_EEE_1000 | EN_10M_CLKDIV;
5816                 ocp_reg_write(tp, OCP_DOWN_SPEED, data);
5817                 tp->ups_info.eee_cmod_lv = true;
5818                 tp->ups_info._10m_ckdiv = true;
5819                 tp->ups_info.eee_plloff_giga = true;
5820
5821                 ocp_reg_write(tp, OCP_SYSCLK_CFG, 0);
5822                 ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5));
5823                 tp->ups_info._250m_ckdiv = true;
5824
5825                 rtl_phy_patch_request(tp, false, true);
5826         }
5827
5828         if (tp->eee_en)
5829                 rtl_eee_enable(tp, true);
5830
5831         r8153_aldps_en(tp, true);
5832         r8152b_enable_fc(tp);
5833
5834         set_bit(PHY_RESET, &tp->flags);
5835 }
5836
5837 static void r8153c_hw_phy_cfg(struct r8152 *tp)
5838 {
5839         r8153b_hw_phy_cfg(tp);
5840
5841         tp->ups_info.r_tune = true;
5842 }
5843
5844 static void rtl8153_change_mtu(struct r8152 *tp)
5845 {
5846         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
5847         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
5848 }
5849
5850 static void r8153_first_init(struct r8152 *tp)
5851 {
5852         u32 ocp_data;
5853
5854         rxdy_gated_en(tp, true);
5855         r8153_teredo_off(tp);
5856
5857         ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
5858         ocp_data &= ~RCR_ACPT_ALL;
5859         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
5860
5861         rtl8152_nic_reset(tp);
5862         rtl_reset_bmu(tp);
5863
5864         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
5865         ocp_data &= ~NOW_IS_OOB;
5866         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
5867
5868         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
5869         ocp_data &= ~MCU_BORW_EN;
5870         ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
5871
5872         wait_oob_link_list_ready(tp);
5873
5874         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
5875         ocp_data |= RE_INIT_LL;
5876         ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
5877
5878         wait_oob_link_list_ready(tp);
5879
5880         rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
5881
5882         rtl8153_change_mtu(tp);
5883
5884         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
5885         ocp_data |= TCR0_AUTO_FIFO;
5886         ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
5887
5888         rtl8152_nic_reset(tp);
5889
5890         /* rx share fifo credit full threshold */
5891         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
5892         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
5893         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
5894         /* TX share fifo free credit full threshold */
5895         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
5896 }
5897
5898 static void r8153_enter_oob(struct r8152 *tp)
5899 {
5900         u32 ocp_data;
5901
5902         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
5903         ocp_data &= ~NOW_IS_OOB;
5904         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
5905
5906         /* RX FIFO settings for OOB */
5907         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
5908         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
5909         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
5910
5911         rtl_disable(tp);
5912         rtl_reset_bmu(tp);
5913
5914         wait_oob_link_list_ready(tp);
5915
5916         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
5917         ocp_data |= RE_INIT_LL;
5918         ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
5919
5920         wait_oob_link_list_ready(tp);
5921
5922         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, 1522);
5923         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_DEFAULT);
5924
5925         switch (tp->version) {
5926         case RTL_VER_03:
5927         case RTL_VER_04:
5928         case RTL_VER_05:
5929         case RTL_VER_06:
5930                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
5931                 ocp_data &= ~TEREDO_WAKE_MASK;
5932                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
5933                 break;
5934
5935         case RTL_VER_08:
5936         case RTL_VER_09:
5937         case RTL_VER_14:
5938                 /* Clear teredo wake event. bit[15:8] is the teredo wakeup
5939                  * type. Set it to zero. bits[7:0] are the W1C bits about
5940                  * the events. Set them to all 1 to clear them.
5941                  */
5942                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff);
5943                 break;
5944
5945         default:
5946                 break;
5947         }
5948
5949         rtl_rx_vlan_en(tp, true);
5950
5951         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR);
5952         ocp_data |= ALDPS_PROXY_MODE;
5953         ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data);
5954
5955         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
5956         ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
5957         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
5958
5959         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
5960         ocp_data |= MCU_BORW_EN;
5961         ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
5962
5963         rxdy_gated_en(tp, false);
5964
5965         ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
5966         ocp_data |= RCR_APM | RCR_AM | RCR_AB;
5967         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
5968 }
5969
5970 static void rtl8153_disable(struct r8152 *tp)
5971 {
5972         r8153_aldps_en(tp, false);
5973         rtl_disable(tp);
5974         rtl_reset_bmu(tp);
5975         r8153_aldps_en(tp, true);
5976 }
5977
5978 static u32 fc_pause_on_auto(struct r8152 *tp)
5979 {
5980         return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 6 * 1024);
5981 }
5982
5983 static u32 fc_pause_off_auto(struct r8152 *tp)
5984 {
5985         return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 14 * 1024);
5986 }
5987
5988 static void r8156_fc_parameter(struct r8152 *tp)
5989 {
5990         u32 pause_on = tp->fc_pause_on ? tp->fc_pause_on : fc_pause_on_auto(tp);
5991         u32 pause_off = tp->fc_pause_off ? tp->fc_pause_off : fc_pause_off_auto(tp);
5992
5993         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 16);
5994         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 16);
5995 }
5996
5997 static int rtl8156_enable(struct r8152 *tp)
5998 {
5999         u32 ocp_data;
6000         u16 speed;
6001
6002         if (test_bit(RTL8152_UNPLUG, &tp->flags))
6003                 return -ENODEV;
6004
6005         r8156_fc_parameter(tp);
6006         set_tx_qlen(tp);
6007         rtl_set_eee_plus(tp);
6008         r8153_set_rx_early_timeout(tp);
6009         r8153_set_rx_early_size(tp);
6010
6011         speed = rtl8152_get_speed(tp);
6012         rtl_set_ifg(tp, speed);
6013
6014         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
6015         if (speed & _2500bps)
6016                 ocp_data &= ~IDLE_SPDWN_EN;
6017         else
6018                 ocp_data |= IDLE_SPDWN_EN;
6019         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
6020
6021         if (speed & _1000bps)
6022                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x11);
6023         else if (speed & _500bps)
6024                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x3d);
6025
6026         if (tp->udev->speed == USB_SPEED_HIGH) {
6027                 /* USB 0xb45e[3:0] l1_nyet_hird */
6028                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
6029                 ocp_data &= ~0xf;
6030                 if (is_flow_control(speed))
6031                         ocp_data |= 0xf;
6032                 else
6033                         ocp_data |= 0x1;
6034                 ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
6035         }
6036
6037         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
6038         ocp_data &= ~FC_PATCH_TASK;
6039         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
6040         usleep_range(1000, 2000);
6041         ocp_data |= FC_PATCH_TASK;
6042         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
6043
6044         return rtl_enable(tp);
6045 }
6046
6047 static void rtl8156_disable(struct r8152 *tp)
6048 {
6049         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, 0);
6050         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, 0);
6051
6052         rtl8153_disable(tp);
6053 }
6054
6055 static int rtl8156b_enable(struct r8152 *tp)
6056 {
6057         u32 ocp_data;
6058         u16 speed;
6059
6060         if (test_bit(RTL8152_UNPLUG, &tp->flags))
6061                 return -ENODEV;
6062
6063         set_tx_qlen(tp);
6064         rtl_set_eee_plus(tp);
6065
6066         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM);
6067         ocp_data &= ~RX_AGGR_NUM_MASK;
6068         ocp_write_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM, ocp_data);
6069
6070         r8153_set_rx_early_timeout(tp);
6071         r8153_set_rx_early_size(tp);
6072
6073         speed = rtl8152_get_speed(tp);
6074         rtl_set_ifg(tp, speed);
6075
6076         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
6077         if (speed & _2500bps)
6078                 ocp_data &= ~IDLE_SPDWN_EN;
6079         else
6080                 ocp_data |= IDLE_SPDWN_EN;
6081         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
6082
6083         if (tp->udev->speed == USB_SPEED_HIGH) {
6084                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
6085                 ocp_data &= ~0xf;
6086                 if (is_flow_control(speed))
6087                         ocp_data |= 0xf;
6088                 else
6089                         ocp_data |= 0x1;
6090                 ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
6091         }
6092
6093         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
6094         ocp_data &= ~FC_PATCH_TASK;
6095         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
6096         usleep_range(1000, 2000);
6097         ocp_data |= FC_PATCH_TASK;
6098         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
6099
6100         return rtl_enable(tp);
6101 }
6102
6103 static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
6104                              u32 advertising)
6105 {
6106         u16 bmcr;
6107         int ret = 0;
6108
6109         if (autoneg == AUTONEG_DISABLE) {
6110                 if (duplex != DUPLEX_HALF && duplex != DUPLEX_FULL)
6111                         return -EINVAL;
6112
6113                 switch (speed) {
6114                 case SPEED_10:
6115                         bmcr = BMCR_SPEED10;
6116                         if (duplex == DUPLEX_FULL) {
6117                                 bmcr |= BMCR_FULLDPLX;
6118                                 tp->ups_info.speed_duplex = FORCE_10M_FULL;
6119                         } else {
6120                                 tp->ups_info.speed_duplex = FORCE_10M_HALF;
6121                         }
6122                         break;
6123                 case SPEED_100:
6124                         bmcr = BMCR_SPEED100;
6125                         if (duplex == DUPLEX_FULL) {
6126                                 bmcr |= BMCR_FULLDPLX;
6127                                 tp->ups_info.speed_duplex = FORCE_100M_FULL;
6128                         } else {
6129                                 tp->ups_info.speed_duplex = FORCE_100M_HALF;
6130                         }
6131                         break;
6132                 case SPEED_1000:
6133                         if (tp->mii.supports_gmii) {
6134                                 bmcr = BMCR_SPEED1000 | BMCR_FULLDPLX;
6135                                 tp->ups_info.speed_duplex = NWAY_1000M_FULL;
6136                                 break;
6137                         }
6138                         fallthrough;
6139                 default:
6140                         ret = -EINVAL;
6141                         goto out;
6142                 }
6143
6144                 if (duplex == DUPLEX_FULL)
6145                         tp->mii.full_duplex = 1;
6146                 else
6147                         tp->mii.full_duplex = 0;
6148
6149                 tp->mii.force_media = 1;
6150         } else {
6151                 u16 orig, new1;
6152                 u32 support;
6153
6154                 support = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
6155                           RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
6156
6157                 if (tp->mii.supports_gmii) {
6158                         support |= RTL_ADVERTISED_1000_FULL;
6159
6160                         if (tp->support_2500full)
6161                                 support |= RTL_ADVERTISED_2500_FULL;
6162                 }
6163
6164                 if (!(advertising & support))
6165                         return -EINVAL;
6166
6167                 orig = r8152_mdio_read(tp, MII_ADVERTISE);
6168                 new1 = orig & ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
6169                                 ADVERTISE_100HALF | ADVERTISE_100FULL);
6170                 if (advertising & RTL_ADVERTISED_10_HALF) {
6171                         new1 |= ADVERTISE_10HALF;
6172                         tp->ups_info.speed_duplex = NWAY_10M_HALF;
6173                 }
6174                 if (advertising & RTL_ADVERTISED_10_FULL) {
6175                         new1 |= ADVERTISE_10FULL;
6176                         tp->ups_info.speed_duplex = NWAY_10M_FULL;
6177                 }
6178
6179                 if (advertising & RTL_ADVERTISED_100_HALF) {
6180                         new1 |= ADVERTISE_100HALF;
6181                         tp->ups_info.speed_duplex = NWAY_100M_HALF;
6182                 }
6183                 if (advertising & RTL_ADVERTISED_100_FULL) {
6184                         new1 |= ADVERTISE_100FULL;
6185                         tp->ups_info.speed_duplex = NWAY_100M_FULL;
6186                 }
6187
6188                 if (orig != new1) {
6189                         r8152_mdio_write(tp, MII_ADVERTISE, new1);
6190                         tp->mii.advertising = new1;
6191                 }
6192
6193                 if (tp->mii.supports_gmii) {
6194                         orig = r8152_mdio_read(tp, MII_CTRL1000);
6195                         new1 = orig & ~(ADVERTISE_1000FULL |
6196                                         ADVERTISE_1000HALF);
6197
6198                         if (advertising & RTL_ADVERTISED_1000_FULL) {
6199                                 new1 |= ADVERTISE_1000FULL;
6200                                 tp->ups_info.speed_duplex = NWAY_1000M_FULL;
6201                         }
6202
6203                         if (orig != new1)
6204                                 r8152_mdio_write(tp, MII_CTRL1000, new1);
6205                 }
6206
6207                 if (tp->support_2500full) {
6208                         orig = ocp_reg_read(tp, OCP_10GBT_CTRL);
6209                         new1 = orig & ~MDIO_AN_10GBT_CTRL_ADV2_5G;
6210
6211                         if (advertising & RTL_ADVERTISED_2500_FULL) {
6212                                 new1 |= MDIO_AN_10GBT_CTRL_ADV2_5G;
6213                                 tp->ups_info.speed_duplex = NWAY_2500M_FULL;
6214                         }
6215
6216                         if (orig != new1)
6217                                 ocp_reg_write(tp, OCP_10GBT_CTRL, new1);
6218                 }
6219
6220                 bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
6221
6222                 tp->mii.force_media = 0;
6223         }
6224
6225         if (test_and_clear_bit(PHY_RESET, &tp->flags))
6226                 bmcr |= BMCR_RESET;
6227
6228         r8152_mdio_write(tp, MII_BMCR, bmcr);
6229
6230         if (bmcr & BMCR_RESET) {
6231                 int i;
6232
6233                 for (i = 0; i < 50; i++) {
6234                         msleep(20);
6235                         if ((r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET) == 0)
6236                                 break;
6237                 }
6238         }
6239
6240 out:
6241         return ret;
6242 }
6243
6244 static void rtl8152_up(struct r8152 *tp)
6245 {
6246         if (test_bit(RTL8152_UNPLUG, &tp->flags))
6247                 return;
6248
6249         r8152_aldps_en(tp, false);
6250         r8152b_exit_oob(tp);
6251         r8152_aldps_en(tp, true);
6252 }
6253
6254 static void rtl8152_down(struct r8152 *tp)
6255 {
6256         if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
6257                 rtl_drop_queued_tx(tp);
6258                 return;
6259         }
6260
6261         r8152_power_cut_en(tp, false);
6262         r8152_aldps_en(tp, false);
6263         r8152b_enter_oob(tp);
6264         r8152_aldps_en(tp, true);
6265 }
6266
6267 static void rtl8153_up(struct r8152 *tp)
6268 {
6269         u32 ocp_data;
6270
6271         if (test_bit(RTL8152_UNPLUG, &tp->flags))
6272                 return;
6273
6274         r8153_u1u2en(tp, false);
6275         r8153_u2p3en(tp, false);
6276         r8153_aldps_en(tp, false);
6277         r8153_first_init(tp);
6278
6279         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
6280         ocp_data |= LANWAKE_CLR_EN;
6281         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
6282
6283         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
6284         ocp_data &= ~LANWAKE_PIN;
6285         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
6286
6287         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1);
6288         ocp_data &= ~DELAY_PHY_PWR_CHG;
6289         ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1, ocp_data);
6290
6291         r8153_aldps_en(tp, true);
6292
6293         switch (tp->version) {
6294         case RTL_VER_03:
6295         case RTL_VER_04:
6296                 break;
6297         case RTL_VER_05:
6298         case RTL_VER_06:
6299         default:
6300                 r8153_u2p3en(tp, true);
6301                 break;
6302         }
6303
6304         r8153_u1u2en(tp, true);
6305 }
6306
6307 static void rtl8153_down(struct r8152 *tp)
6308 {
6309         u32 ocp_data;
6310
6311         if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
6312                 rtl_drop_queued_tx(tp);
6313                 return;
6314         }
6315
6316         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
6317         ocp_data &= ~LANWAKE_CLR_EN;
6318         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
6319
6320         r8153_u1u2en(tp, false);
6321         r8153_u2p3en(tp, false);
6322         r8153_power_cut_en(tp, false);
6323         r8153_aldps_en(tp, false);
6324         r8153_enter_oob(tp);
6325         r8153_aldps_en(tp, true);
6326 }
6327
6328 static void rtl8153b_up(struct r8152 *tp)
6329 {
6330         u32 ocp_data;
6331
6332         if (test_bit(RTL8152_UNPLUG, &tp->flags))
6333                 return;
6334
6335         r8153b_u1u2en(tp, false);
6336         r8153_u2p3en(tp, false);
6337         r8153_aldps_en(tp, false);
6338
6339         r8153_first_init(tp);
6340         ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B);
6341
6342         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
6343         ocp_data &= ~PLA_MCU_SPDWN_EN;
6344         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
6345
6346         r8153_aldps_en(tp, true);
6347
6348         if (tp->udev->speed >= USB_SPEED_SUPER)
6349                 r8153b_u1u2en(tp, true);
6350 }
6351
6352 static void rtl8153b_down(struct r8152 *tp)
6353 {
6354         u32 ocp_data;
6355
6356         if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
6357                 rtl_drop_queued_tx(tp);
6358                 return;
6359         }
6360
6361         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
6362         ocp_data |= PLA_MCU_SPDWN_EN;
6363         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
6364
6365         r8153b_u1u2en(tp, false);
6366         r8153_u2p3en(tp, false);
6367         r8153b_power_cut_en(tp, false);
6368         r8153_aldps_en(tp, false);
6369         r8153_enter_oob(tp);
6370         r8153_aldps_en(tp, true);
6371 }
6372
6373 static void rtl8153c_change_mtu(struct r8152 *tp)
6374 {
6375         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
6376         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, 10 * 1024 / 64);
6377
6378         ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64);
6379
6380         /* Adjust the tx fifo free credit full threshold, otherwise
6381          * the fifo would be too small to send a jumbo frame packet.
6382          */
6383         if (tp->netdev->mtu < 8000)
6384                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 2048 / 8);
6385         else
6386                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 900 / 8);
6387 }
6388
6389 static void rtl8153c_up(struct r8152 *tp)
6390 {
6391         u32 ocp_data;
6392
6393         if (test_bit(RTL8152_UNPLUG, &tp->flags))
6394                 return;
6395
6396         r8153b_u1u2en(tp, false);
6397         r8153_u2p3en(tp, false);
6398         r8153_aldps_en(tp, false);
6399
6400         rxdy_gated_en(tp, true);
6401         r8153_teredo_off(tp);
6402
6403         ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
6404         ocp_data &= ~RCR_ACPT_ALL;
6405         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
6406
6407         rtl8152_nic_reset(tp);
6408         rtl_reset_bmu(tp);
6409
6410         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
6411         ocp_data &= ~NOW_IS_OOB;
6412         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
6413
6414         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
6415         ocp_data &= ~MCU_BORW_EN;
6416         ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
6417
6418         wait_oob_link_list_ready(tp);
6419
6420         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
6421         ocp_data |= RE_INIT_LL;
6422         ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
6423
6424         wait_oob_link_list_ready(tp);
6425
6426         rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
6427
6428         rtl8153c_change_mtu(tp);
6429
6430         rtl8152_nic_reset(tp);
6431
6432         /* rx share fifo credit full threshold */
6433         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, 0x02);
6434         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, 0x08);
6435         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
6436         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
6437
6438         ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B);
6439
6440         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
6441
6442         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
6443         ocp_data |= BIT(8);
6444         ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
6445
6446         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
6447
6448         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
6449         ocp_data &= ~PLA_MCU_SPDWN_EN;
6450         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
6451
6452         r8153_aldps_en(tp, true);
6453         r8153b_u1u2en(tp, true);
6454 }
6455
6456 static void rtl8156_change_mtu(struct r8152 *tp)
6457 {
6458         u32 rx_max_size = mtu_to_size(tp->netdev->mtu);
6459
6460         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rx_max_size);
6461         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
6462         r8156_fc_parameter(tp);
6463
6464         /* TX share fifo free credit full threshold */
6465         ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64);
6466         ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL,
6467                        ALIGN(rx_max_size + sizeof(struct tx_desc), 1024) / 16);
6468 }
6469
6470 static void rtl8156_up(struct r8152 *tp)
6471 {
6472         u32 ocp_data;
6473
6474         if (test_bit(RTL8152_UNPLUG, &tp->flags))
6475                 return;
6476
6477         r8153b_u1u2en(tp, false);
6478         r8153_u2p3en(tp, false);
6479         r8153_aldps_en(tp, false);
6480
6481         rxdy_gated_en(tp, true);
6482         r8153_teredo_off(tp);
6483
6484         ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
6485         ocp_data &= ~RCR_ACPT_ALL;
6486         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
6487
6488         rtl8152_nic_reset(tp);
6489         rtl_reset_bmu(tp);
6490
6491         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
6492         ocp_data &= ~NOW_IS_OOB;
6493         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
6494
6495         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
6496         ocp_data &= ~MCU_BORW_EN;
6497         ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
6498
6499         rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
6500
6501         rtl8156_change_mtu(tp);
6502
6503         switch (tp->version) {
6504         case RTL_TEST_01:
6505         case RTL_VER_10:
6506         case RTL_VER_11:
6507                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
6508                 ocp_data |= ACT_ODMA;
6509                 ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
6510                 break;
6511         default:
6512                 break;
6513         }
6514
6515         /* share FIFO settings */
6516         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL);
6517         ocp_data &= ~RXFIFO_FULL_MASK;
6518         ocp_data |= 0x08;
6519         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, ocp_data);
6520
6521         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
6522         ocp_data &= ~PLA_MCU_SPDWN_EN;
6523         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
6524
6525         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION);
6526         ocp_data &= ~(RG_PWRDN_EN | ALL_SPEED_OFF);
6527         ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, ocp_data);
6528
6529         ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, 0x00600400);
6530
6531         if (tp->saved_wolopts != __rtl_get_wol(tp)) {
6532                 netif_warn(tp, ifup, tp->netdev, "wol setting is changed\n");
6533                 __rtl_set_wol(tp, tp->saved_wolopts);
6534         }
6535
6536         r8153_aldps_en(tp, true);
6537         r8153_u2p3en(tp, true);
6538
6539         if (tp->udev->speed >= USB_SPEED_SUPER)
6540                 r8153b_u1u2en(tp, true);
6541 }
6542
6543 static void rtl8156_down(struct r8152 *tp)
6544 {
6545         u32 ocp_data;
6546
6547         if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
6548                 rtl_drop_queued_tx(tp);
6549                 return;
6550         }
6551
6552         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
6553         ocp_data |= PLA_MCU_SPDWN_EN;
6554         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
6555
6556         r8153b_u1u2en(tp, false);
6557         r8153_u2p3en(tp, false);
6558         r8153b_power_cut_en(tp, false);
6559         r8153_aldps_en(tp, false);
6560
6561         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
6562         ocp_data &= ~NOW_IS_OOB;
6563         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
6564
6565         /* RX FIFO settings for OOB */
6566         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, 64 / 16);
6567         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, 1024 / 16);
6568         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, 4096 / 16);
6569
6570         rtl_disable(tp);
6571         rtl_reset_bmu(tp);
6572
6573         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, 1522);
6574         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_DEFAULT);
6575
6576         /* Clear teredo wake event. bit[15:8] is the teredo wakeup
6577          * type. Set it to zero. bits[7:0] are the W1C bits about
6578          * the events. Set them to all 1 to clear them.
6579          */
6580         ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff);
6581
6582         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
6583         ocp_data |= NOW_IS_OOB;
6584         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
6585
6586         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
6587         ocp_data |= MCU_BORW_EN;
6588         ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
6589
6590         rtl_rx_vlan_en(tp, true);
6591         rxdy_gated_en(tp, false);
6592
6593         ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
6594         ocp_data |= RCR_APM | RCR_AM | RCR_AB;
6595         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
6596
6597         r8153_aldps_en(tp, true);
6598 }
6599
6600 static bool rtl8152_in_nway(struct r8152 *tp)
6601 {
6602         u16 nway_state;
6603
6604         ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, 0x2000);
6605         tp->ocp_base = 0x2000;
6606         ocp_write_byte(tp, MCU_TYPE_PLA, 0xb014, 0x4c);         /* phy state */
6607         nway_state = ocp_read_word(tp, MCU_TYPE_PLA, 0xb01a);
6608
6609         /* bit 15: TXDIS_STATE, bit 14: ABD_STATE */
6610         if (nway_state & 0xc000)
6611                 return false;
6612         else
6613                 return true;
6614 }
6615
6616 static bool rtl8153_in_nway(struct r8152 *tp)
6617 {
6618         u16 phy_state = ocp_reg_read(tp, OCP_PHY_STATE) & 0xff;
6619
6620         if (phy_state == TXDIS_STATE || phy_state == ABD_STATE)
6621                 return false;
6622         else
6623                 return true;
6624 }
6625
6626 static void r8156_mdio_force_mode(struct r8152 *tp)
6627 {
6628         u16 data;
6629
6630         /* Select force mode through 0xa5b4 bit 15
6631          * 0: MDIO force mode
6632          * 1: MMD force mode
6633          */
6634         data = ocp_reg_read(tp, 0xa5b4);
6635         if (data & BIT(15)) {
6636                 data &= ~BIT(15);
6637                 ocp_reg_write(tp, 0xa5b4, data);
6638         }
6639 }
6640
6641 static void set_carrier(struct r8152 *tp)
6642 {
6643         struct net_device *netdev = tp->netdev;
6644         struct napi_struct *napi = &tp->napi;
6645         u16 speed;
6646
6647         speed = rtl8152_get_speed(tp);
6648
6649         if (speed & LINK_STATUS) {
6650                 if (!netif_carrier_ok(netdev)) {
6651                         tp->rtl_ops.enable(tp);
6652                         netif_stop_queue(netdev);
6653                         napi_disable(napi);
6654                         netif_carrier_on(netdev);
6655                         rtl_start_rx(tp);
6656                         clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
6657                         _rtl8152_set_rx_mode(netdev);
6658                         napi_enable(napi);
6659                         netif_wake_queue(netdev);
6660                         netif_info(tp, link, netdev, "carrier on\n");
6661                 } else if (netif_queue_stopped(netdev) &&
6662                            skb_queue_len(&tp->tx_queue) < tp->tx_qlen) {
6663                         netif_wake_queue(netdev);
6664                 }
6665         } else {
6666                 if (netif_carrier_ok(netdev)) {
6667                         netif_carrier_off(netdev);
6668                         tasklet_disable(&tp->tx_tl);
6669                         napi_disable(napi);
6670                         tp->rtl_ops.disable(tp);
6671                         napi_enable(napi);
6672                         tasklet_enable(&tp->tx_tl);
6673                         netif_info(tp, link, netdev, "carrier off\n");
6674                 }
6675         }
6676 }
6677
6678 static void rtl_work_func_t(struct work_struct *work)
6679 {
6680         struct r8152 *tp = container_of(work, struct r8152, schedule.work);
6681
6682         /* If the device is unplugged or !netif_running(), the workqueue
6683          * doesn't need to wake the device, and could return directly.
6684          */
6685         if (test_bit(RTL8152_UNPLUG, &tp->flags) || !netif_running(tp->netdev))
6686                 return;
6687
6688         if (usb_autopm_get_interface(tp->intf) < 0)
6689                 return;
6690
6691         if (!test_bit(WORK_ENABLE, &tp->flags))
6692                 goto out1;
6693
6694         if (!mutex_trylock(&tp->control)) {
6695                 schedule_delayed_work(&tp->schedule, 0);
6696                 goto out1;
6697         }
6698
6699         if (test_and_clear_bit(RTL8152_LINK_CHG, &tp->flags))
6700                 set_carrier(tp);
6701
6702         if (test_and_clear_bit(RTL8152_SET_RX_MODE, &tp->flags))
6703                 _rtl8152_set_rx_mode(tp->netdev);
6704
6705         /* don't schedule tasket before linking */
6706         if (test_and_clear_bit(SCHEDULE_TASKLET, &tp->flags) &&
6707             netif_carrier_ok(tp->netdev))
6708                 tasklet_schedule(&tp->tx_tl);
6709
6710         if (test_and_clear_bit(RX_EPROTO, &tp->flags) &&
6711             !list_empty(&tp->rx_done))
6712                 napi_schedule(&tp->napi);
6713
6714         mutex_unlock(&tp->control);
6715
6716 out1:
6717         usb_autopm_put_interface(tp->intf);
6718 }
6719
6720 static void rtl_hw_phy_work_func_t(struct work_struct *work)
6721 {
6722         struct r8152 *tp = container_of(work, struct r8152, hw_phy_work.work);
6723
6724         if (test_bit(RTL8152_UNPLUG, &tp->flags))
6725                 return;
6726
6727         if (usb_autopm_get_interface(tp->intf) < 0)
6728                 return;
6729
6730         mutex_lock(&tp->control);
6731
6732         if (rtl8152_request_firmware(tp) == -ENODEV && tp->rtl_fw.retry) {
6733                 tp->rtl_fw.retry = false;
6734                 tp->rtl_fw.fw = NULL;
6735
6736                 /* Delay execution in case request_firmware() is not ready yet.
6737                  */
6738                 queue_delayed_work(system_long_wq, &tp->hw_phy_work, HZ * 10);
6739                 goto ignore_once;
6740         }
6741
6742         tp->rtl_ops.hw_phy_cfg(tp);
6743
6744         rtl8152_set_speed(tp, tp->autoneg, tp->speed, tp->duplex,
6745                           tp->advertising);
6746
6747 ignore_once:
6748         mutex_unlock(&tp->control);
6749
6750         usb_autopm_put_interface(tp->intf);
6751 }
6752
6753 #ifdef CONFIG_PM_SLEEP
6754 static int rtl_notifier(struct notifier_block *nb, unsigned long action,
6755                         void *data)
6756 {
6757         struct r8152 *tp = container_of(nb, struct r8152, pm_notifier);
6758
6759         switch (action) {
6760         case PM_HIBERNATION_PREPARE:
6761         case PM_SUSPEND_PREPARE:
6762                 usb_autopm_get_interface(tp->intf);
6763                 break;
6764
6765         case PM_POST_HIBERNATION:
6766         case PM_POST_SUSPEND:
6767                 usb_autopm_put_interface(tp->intf);
6768                 break;
6769
6770         case PM_POST_RESTORE:
6771         case PM_RESTORE_PREPARE:
6772         default:
6773                 break;
6774         }
6775
6776         return NOTIFY_DONE;
6777 }
6778 #endif
6779
6780 static int rtl8152_open(struct net_device *netdev)
6781 {
6782         struct r8152 *tp = netdev_priv(netdev);
6783         int res = 0;
6784
6785         if (work_busy(&tp->hw_phy_work.work) & WORK_BUSY_PENDING) {
6786                 cancel_delayed_work_sync(&tp->hw_phy_work);
6787                 rtl_hw_phy_work_func_t(&tp->hw_phy_work.work);
6788         }
6789
6790         res = alloc_all_mem(tp);
6791         if (res)
6792                 goto out;
6793
6794         res = usb_autopm_get_interface(tp->intf);
6795         if (res < 0)
6796                 goto out_free;
6797
6798         mutex_lock(&tp->control);
6799
6800         tp->rtl_ops.up(tp);
6801
6802         netif_carrier_off(netdev);
6803         netif_start_queue(netdev);
6804         set_bit(WORK_ENABLE, &tp->flags);
6805
6806         res = usb_submit_urb(tp->intr_urb, GFP_KERNEL);
6807         if (res) {
6808                 if (res == -ENODEV)
6809                         netif_device_detach(tp->netdev);
6810                 netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
6811                            res);
6812                 goto out_unlock;
6813         }
6814         napi_enable(&tp->napi);
6815         tasklet_enable(&tp->tx_tl);
6816
6817         mutex_unlock(&tp->control);
6818
6819         usb_autopm_put_interface(tp->intf);
6820 #ifdef CONFIG_PM_SLEEP
6821         tp->pm_notifier.notifier_call = rtl_notifier;
6822         register_pm_notifier(&tp->pm_notifier);
6823 #endif
6824         return 0;
6825
6826 out_unlock:
6827         mutex_unlock(&tp->control);
6828         usb_autopm_put_interface(tp->intf);
6829 out_free:
6830         free_all_mem(tp);
6831 out:
6832         return res;
6833 }
6834
6835 static int rtl8152_close(struct net_device *netdev)
6836 {
6837         struct r8152 *tp = netdev_priv(netdev);
6838         int res = 0;
6839
6840 #ifdef CONFIG_PM_SLEEP
6841         unregister_pm_notifier(&tp->pm_notifier);
6842 #endif
6843         tasklet_disable(&tp->tx_tl);
6844         clear_bit(WORK_ENABLE, &tp->flags);
6845         usb_kill_urb(tp->intr_urb);
6846         cancel_delayed_work_sync(&tp->schedule);
6847         napi_disable(&tp->napi);
6848         netif_stop_queue(netdev);
6849
6850         res = usb_autopm_get_interface(tp->intf);
6851         if (res < 0 || test_bit(RTL8152_UNPLUG, &tp->flags)) {
6852                 rtl_drop_queued_tx(tp);
6853                 rtl_stop_rx(tp);
6854         } else {
6855                 mutex_lock(&tp->control);
6856
6857                 tp->rtl_ops.down(tp);
6858
6859                 mutex_unlock(&tp->control);
6860         }
6861
6862         if (!res)
6863                 usb_autopm_put_interface(tp->intf);
6864
6865         free_all_mem(tp);
6866
6867         return res;
6868 }
6869
6870 static void rtl_tally_reset(struct r8152 *tp)
6871 {
6872         u32 ocp_data;
6873
6874         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY);
6875         ocp_data |= TALLY_RESET;
6876         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
6877 }
6878
6879 static void r8152b_init(struct r8152 *tp)
6880 {
6881         u32 ocp_data;
6882         u16 data;
6883
6884         if (test_bit(RTL8152_UNPLUG, &tp->flags))
6885                 return;
6886
6887         data = r8152_mdio_read(tp, MII_BMCR);
6888         if (data & BMCR_PDOWN) {
6889                 data &= ~BMCR_PDOWN;
6890                 r8152_mdio_write(tp, MII_BMCR, data);
6891         }
6892
6893         r8152_aldps_en(tp, false);
6894
6895         if (tp->version == RTL_VER_01) {
6896                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
6897                 ocp_data &= ~LED_MODE_MASK;
6898                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
6899         }
6900
6901         r8152_power_cut_en(tp, false);
6902
6903         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
6904         ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
6905         ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
6906         ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL);
6907         ocp_data &= ~MCU_CLK_RATIO_MASK;
6908         ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN;
6909         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data);
6910         ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK |
6911                    SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK;
6912         ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data);
6913
6914         rtl_tally_reset(tp);
6915
6916         /* enable rx aggregation */
6917         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
6918         ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
6919         ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
6920 }
6921
6922 static void r8153_init(struct r8152 *tp)
6923 {
6924         u32 ocp_data;
6925         u16 data;
6926         int i;
6927
6928         if (test_bit(RTL8152_UNPLUG, &tp->flags))
6929                 return;
6930
6931         r8153_u1u2en(tp, false);
6932
6933         for (i = 0; i < 500; i++) {
6934                 if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
6935                     AUTOLOAD_DONE)
6936                         break;
6937
6938                 msleep(20);
6939                 if (test_bit(RTL8152_UNPLUG, &tp->flags))
6940                         break;
6941         }
6942
6943         data = r8153_phy_status(tp, 0);
6944
6945         if (tp->version == RTL_VER_03 || tp->version == RTL_VER_04 ||
6946             tp->version == RTL_VER_05)
6947                 ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L);
6948
6949         data = r8152_mdio_read(tp, MII_BMCR);
6950         if (data & BMCR_PDOWN) {
6951                 data &= ~BMCR_PDOWN;
6952                 r8152_mdio_write(tp, MII_BMCR, data);
6953         }
6954
6955         data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
6956
6957         r8153_u2p3en(tp, false);
6958
6959         if (tp->version == RTL_VER_04) {
6960                 ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2);
6961                 ocp_data &= ~pwd_dn_scale_mask;
6962                 ocp_data |= pwd_dn_scale(96);
6963                 ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2, ocp_data);
6964
6965                 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
6966                 ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
6967                 ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
6968         } else if (tp->version == RTL_VER_05) {
6969                 ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0);
6970                 ocp_data &= ~ECM_ALDPS;
6971                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0, ocp_data);
6972
6973                 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1);
6974                 if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0)
6975                         ocp_data &= ~DYNAMIC_BURST;
6976                 else
6977                         ocp_data |= DYNAMIC_BURST;
6978                 ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
6979         } else if (tp->version == RTL_VER_06) {
6980                 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1);
6981                 if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0)
6982                         ocp_data &= ~DYNAMIC_BURST;
6983                 else
6984                         ocp_data |= DYNAMIC_BURST;
6985                 ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
6986
6987                 r8153_queue_wake(tp, false);
6988
6989                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
6990                 if (rtl8152_get_speed(tp) & LINK_STATUS)
6991                         ocp_data |= CUR_LINK_OK;
6992                 else
6993                         ocp_data &= ~CUR_LINK_OK;
6994                 ocp_data |= POLL_LINK_CHG;
6995                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
6996         }
6997
6998         ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2);
6999         ocp_data |= EP4_FULL_FC;
7000         ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2, ocp_data);
7001
7002         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL);
7003         ocp_data &= ~TIMER11_EN;
7004         ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data);
7005
7006         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
7007         ocp_data &= ~LED_MODE_MASK;
7008         ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
7009
7010         ocp_data = FIFO_EMPTY_1FB | ROK_EXIT_LPM;
7011         if (tp->version == RTL_VER_04 && tp->udev->speed < USB_SPEED_SUPER)
7012                 ocp_data |= LPM_TIMER_500MS;
7013         else
7014                 ocp_data |= LPM_TIMER_500US;
7015         ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data);
7016
7017         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2);
7018         ocp_data &= ~SEN_VAL_MASK;
7019         ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE;
7020         ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data);
7021
7022         ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
7023
7024         r8153_power_cut_en(tp, false);
7025         rtl_runtime_suspend_enable(tp, false);
7026         r8153_mac_clk_speed_down(tp, false);
7027         r8153_u1u2en(tp, true);
7028         usb_enable_lpm(tp->udev);
7029
7030         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
7031         ocp_data |= LANWAKE_CLR_EN;
7032         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
7033
7034         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
7035         ocp_data &= ~LANWAKE_PIN;
7036         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
7037
7038         /* rx aggregation */
7039         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
7040         ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
7041         if (tp->dell_tb_rx_agg_bug)
7042                 ocp_data |= RX_AGG_DISABLE;
7043
7044         ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
7045
7046         rtl_tally_reset(tp);
7047
7048         switch (tp->udev->speed) {
7049         case USB_SPEED_SUPER:
7050         case USB_SPEED_SUPER_PLUS:
7051                 tp->coalesce = COALESCE_SUPER;
7052                 break;
7053         case USB_SPEED_HIGH:
7054                 tp->coalesce = COALESCE_HIGH;
7055                 break;
7056         default:
7057                 tp->coalesce = COALESCE_SLOW;
7058                 break;
7059         }
7060 }
7061
7062 static void r8153b_init(struct r8152 *tp)
7063 {
7064         u32 ocp_data;
7065         u16 data;
7066         int i;
7067
7068         if (test_bit(RTL8152_UNPLUG, &tp->flags))
7069                 return;
7070
7071         r8153b_u1u2en(tp, false);
7072
7073         for (i = 0; i < 500; i++) {
7074                 if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
7075                     AUTOLOAD_DONE)
7076                         break;
7077
7078                 msleep(20);
7079                 if (test_bit(RTL8152_UNPLUG, &tp->flags))
7080                         break;
7081         }
7082
7083         data = r8153_phy_status(tp, 0);
7084
7085         data = r8152_mdio_read(tp, MII_BMCR);
7086         if (data & BMCR_PDOWN) {
7087                 data &= ~BMCR_PDOWN;
7088                 r8152_mdio_write(tp, MII_BMCR, data);
7089         }
7090
7091         data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
7092
7093         r8153_u2p3en(tp, false);
7094
7095         /* MSC timer = 0xfff * 8ms = 32760 ms */
7096         ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
7097
7098         r8153b_power_cut_en(tp, false);
7099         r8153b_ups_en(tp, false);
7100         r8153_queue_wake(tp, false);
7101         rtl_runtime_suspend_enable(tp, false);
7102
7103         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
7104         if (rtl8152_get_speed(tp) & LINK_STATUS)
7105                 ocp_data |= CUR_LINK_OK;
7106         else
7107                 ocp_data &= ~CUR_LINK_OK;
7108         ocp_data |= POLL_LINK_CHG;
7109         ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
7110
7111         if (tp->udev->speed >= USB_SPEED_SUPER)
7112                 r8153b_u1u2en(tp, true);
7113
7114         usb_enable_lpm(tp->udev);
7115
7116         /* MAC clock speed down */
7117         r8153_mac_clk_speed_down(tp, true);
7118
7119         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
7120         ocp_data &= ~PLA_MCU_SPDWN_EN;
7121         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
7122
7123         if (tp->version == RTL_VER_09) {
7124                 /* Disable Test IO for 32QFN */
7125                 if (ocp_read_byte(tp, MCU_TYPE_PLA, 0xdc00) & BIT(5)) {
7126                         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
7127                         ocp_data |= TEST_IO_OFF;
7128                         ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
7129                 }
7130         }
7131
7132         set_bit(GREEN_ETHERNET, &tp->flags);
7133
7134         /* rx aggregation */
7135         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
7136         ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
7137         ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
7138
7139         rtl_tally_reset(tp);
7140
7141         tp->coalesce = 15000;   /* 15 us */
7142 }
7143
7144 static void r8153c_init(struct r8152 *tp)
7145 {
7146         u32 ocp_data;
7147         u16 data;
7148         int i;
7149
7150         if (test_bit(RTL8152_UNPLUG, &tp->flags))
7151                 return;
7152
7153         r8153b_u1u2en(tp, false);
7154
7155         /* Disable spi_en */
7156         ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
7157         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
7158         ocp_data &= ~BIT(3);
7159         ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
7160         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, 0xcbf0);
7161         ocp_data |= BIT(1);
7162         ocp_write_word(tp, MCU_TYPE_USB, 0xcbf0, ocp_data);
7163
7164         for (i = 0; i < 500; i++) {
7165                 if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
7166                     AUTOLOAD_DONE)
7167                         break;
7168
7169                 msleep(20);
7170                 if (test_bit(RTL8152_UNPLUG, &tp->flags))
7171                         return;
7172         }
7173
7174         data = r8153_phy_status(tp, 0);
7175
7176         data = r8152_mdio_read(tp, MII_BMCR);
7177         if (data & BMCR_PDOWN) {
7178                 data &= ~BMCR_PDOWN;
7179                 r8152_mdio_write(tp, MII_BMCR, data);
7180         }
7181
7182         data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
7183
7184         r8153_u2p3en(tp, false);
7185
7186         /* MSC timer = 0xfff * 8ms = 32760 ms */
7187         ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
7188
7189         r8153b_power_cut_en(tp, false);
7190         r8153c_ups_en(tp, false);
7191         r8153_queue_wake(tp, false);
7192         rtl_runtime_suspend_enable(tp, false);
7193
7194         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
7195         if (rtl8152_get_speed(tp) & LINK_STATUS)
7196                 ocp_data |= CUR_LINK_OK;
7197         else
7198                 ocp_data &= ~CUR_LINK_OK;
7199
7200         ocp_data |= POLL_LINK_CHG;
7201         ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
7202
7203         r8153b_u1u2en(tp, true);
7204
7205         usb_enable_lpm(tp->udev);
7206
7207         /* MAC clock speed down */
7208         r8153_mac_clk_speed_down(tp, true);
7209
7210         ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
7211         ocp_data &= ~BIT(7);
7212         ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
7213
7214         set_bit(GREEN_ETHERNET, &tp->flags);
7215
7216         /* rx aggregation */
7217         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
7218         ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
7219         ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
7220
7221         rtl_tally_reset(tp);
7222
7223         tp->coalesce = 15000;   /* 15 us */
7224 }
7225
7226 static void r8156_hw_phy_cfg(struct r8152 *tp)
7227 {
7228         u32 ocp_data;
7229         u16 data;
7230
7231         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
7232         if (ocp_data & PCUT_STATUS) {
7233                 ocp_data &= ~PCUT_STATUS;
7234                 ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
7235         }
7236
7237         data = r8153_phy_status(tp, 0);
7238         switch (data) {
7239         case PHY_STAT_EXT_INIT:
7240                 rtl8152_apply_firmware(tp, true);
7241
7242                 data = ocp_reg_read(tp, 0xa468);
7243                 data &= ~(BIT(3) | BIT(1));
7244                 ocp_reg_write(tp, 0xa468, data);
7245                 break;
7246         case PHY_STAT_LAN_ON:
7247         case PHY_STAT_PWRDN:
7248         default:
7249                 rtl8152_apply_firmware(tp, false);
7250                 break;
7251         }
7252
7253         /* disable ALDPS before updating the PHY parameters */
7254         r8153_aldps_en(tp, false);
7255
7256         /* disable EEE before updating the PHY parameters */
7257         rtl_eee_enable(tp, false);
7258
7259         data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
7260         WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
7261
7262         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
7263         ocp_data |= PFM_PWM_SWITCH;
7264         ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
7265
7266         switch (tp->version) {
7267         case RTL_VER_10:
7268                 data = ocp_reg_read(tp, 0xad40);
7269                 data &= ~0x3ff;
7270                 data |= BIT(7) | BIT(2);
7271                 ocp_reg_write(tp, 0xad40, data);
7272
7273                 data = ocp_reg_read(tp, 0xad4e);
7274                 data |= BIT(4);
7275                 ocp_reg_write(tp, 0xad4e, data);
7276                 data = ocp_reg_read(tp, 0xad16);
7277                 data &= ~0x3ff;
7278                 data |= 0x6;
7279                 ocp_reg_write(tp, 0xad16, data);
7280                 data = ocp_reg_read(tp, 0xad32);
7281                 data &= ~0x3f;
7282                 data |= 6;
7283                 ocp_reg_write(tp, 0xad32, data);
7284                 data = ocp_reg_read(tp, 0xac08);
7285                 data &= ~(BIT(12) | BIT(8));
7286                 ocp_reg_write(tp, 0xac08, data);
7287                 data = ocp_reg_read(tp, 0xac8a);
7288                 data |= BIT(12) | BIT(13) | BIT(14);
7289                 data &= ~BIT(15);
7290                 ocp_reg_write(tp, 0xac8a, data);
7291                 data = ocp_reg_read(tp, 0xad18);
7292                 data |= BIT(10);
7293                 ocp_reg_write(tp, 0xad18, data);
7294                 data = ocp_reg_read(tp, 0xad1a);
7295                 data |= 0x3ff;
7296                 ocp_reg_write(tp, 0xad1a, data);
7297                 data = ocp_reg_read(tp, 0xad1c);
7298                 data |= 0x3ff;
7299                 ocp_reg_write(tp, 0xad1c, data);
7300
7301                 data = sram_read(tp, 0x80ea);
7302                 data &= ~0xff00;
7303                 data |= 0xc400;
7304                 sram_write(tp, 0x80ea, data);
7305                 data = sram_read(tp, 0x80eb);
7306                 data &= ~0x0700;
7307                 data |= 0x0300;
7308                 sram_write(tp, 0x80eb, data);
7309                 data = sram_read(tp, 0x80f8);
7310                 data &= ~0xff00;
7311                 data |= 0x1c00;
7312                 sram_write(tp, 0x80f8, data);
7313                 data = sram_read(tp, 0x80f1);
7314                 data &= ~0xff00;
7315                 data |= 0x3000;
7316                 sram_write(tp, 0x80f1, data);
7317
7318                 data = sram_read(tp, 0x80fe);
7319                 data &= ~0xff00;
7320                 data |= 0xa500;
7321                 sram_write(tp, 0x80fe, data);
7322                 data = sram_read(tp, 0x8102);
7323                 data &= ~0xff00;
7324                 data |= 0x5000;
7325                 sram_write(tp, 0x8102, data);
7326                 data = sram_read(tp, 0x8015);
7327                 data &= ~0xff00;
7328                 data |= 0x3300;
7329                 sram_write(tp, 0x8015, data);
7330                 data = sram_read(tp, 0x8100);
7331                 data &= ~0xff00;
7332                 data |= 0x7000;
7333                 sram_write(tp, 0x8100, data);
7334                 data = sram_read(tp, 0x8014);
7335                 data &= ~0xff00;
7336                 data |= 0xf000;
7337                 sram_write(tp, 0x8014, data);
7338                 data = sram_read(tp, 0x8016);
7339                 data &= ~0xff00;
7340                 data |= 0x6500;
7341                 sram_write(tp, 0x8016, data);
7342                 data = sram_read(tp, 0x80dc);
7343                 data &= ~0xff00;
7344                 data |= 0xed00;
7345                 sram_write(tp, 0x80dc, data);
7346                 data = sram_read(tp, 0x80df);
7347                 data |= BIT(8);
7348                 sram_write(tp, 0x80df, data);
7349                 data = sram_read(tp, 0x80e1);
7350                 data &= ~BIT(8);
7351                 sram_write(tp, 0x80e1, data);
7352
7353                 data = ocp_reg_read(tp, 0xbf06);
7354                 data &= ~0x003f;
7355                 data |= 0x0038;
7356                 ocp_reg_write(tp, 0xbf06, data);
7357
7358                 sram_write(tp, 0x819f, 0xddb6);
7359
7360                 ocp_reg_write(tp, 0xbc34, 0x5555);
7361                 data = ocp_reg_read(tp, 0xbf0a);
7362                 data &= ~0x0e00;
7363                 data |= 0x0a00;
7364                 ocp_reg_write(tp, 0xbf0a, data);
7365
7366                 data = ocp_reg_read(tp, 0xbd2c);
7367                 data &= ~BIT(13);
7368                 ocp_reg_write(tp, 0xbd2c, data);
7369                 break;
7370         case RTL_VER_11:
7371                 data = ocp_reg_read(tp, 0xad16);
7372                 data |= 0x3ff;
7373                 ocp_reg_write(tp, 0xad16, data);
7374                 data = ocp_reg_read(tp, 0xad32);
7375                 data &= ~0x3f;
7376                 data |= 6;
7377                 ocp_reg_write(tp, 0xad32, data);
7378                 data = ocp_reg_read(tp, 0xac08);
7379                 data &= ~(BIT(12) | BIT(8));
7380                 ocp_reg_write(tp, 0xac08, data);
7381                 data = ocp_reg_read(tp, 0xacc0);
7382                 data &= ~0x3;
7383                 data |= BIT(1);
7384                 ocp_reg_write(tp, 0xacc0, data);
7385                 data = ocp_reg_read(tp, 0xad40);
7386                 data &= ~0xe7;
7387                 data |= BIT(6) | BIT(2);
7388                 ocp_reg_write(tp, 0xad40, data);
7389                 data = ocp_reg_read(tp, 0xac14);
7390                 data &= ~BIT(7);
7391                 ocp_reg_write(tp, 0xac14, data);
7392                 data = ocp_reg_read(tp, 0xac80);
7393                 data &= ~(BIT(8) | BIT(9));
7394                 ocp_reg_write(tp, 0xac80, data);
7395                 data = ocp_reg_read(tp, 0xac5e);
7396                 data &= ~0x7;
7397                 data |= BIT(1);
7398                 ocp_reg_write(tp, 0xac5e, data);
7399                 ocp_reg_write(tp, 0xad4c, 0x00a8);
7400                 ocp_reg_write(tp, 0xac5c, 0x01ff);
7401                 data = ocp_reg_read(tp, 0xac8a);
7402                 data &= ~0xf0;
7403                 data |= BIT(4) | BIT(5);
7404                 ocp_reg_write(tp, 0xac8a, data);
7405                 ocp_reg_write(tp, 0xb87c, 0x8157);
7406                 data = ocp_reg_read(tp, 0xb87e);
7407                 data &= ~0xff00;
7408                 data |= 0x0500;
7409                 ocp_reg_write(tp, 0xb87e, data);
7410                 ocp_reg_write(tp, 0xb87c, 0x8159);
7411                 data = ocp_reg_read(tp, 0xb87e);
7412                 data &= ~0xff00;
7413                 data |= 0x0700;
7414                 ocp_reg_write(tp, 0xb87e, data);
7415
7416                 /* AAGC */
7417                 ocp_reg_write(tp, 0xb87c, 0x80a2);
7418                 ocp_reg_write(tp, 0xb87e, 0x0153);
7419                 ocp_reg_write(tp, 0xb87c, 0x809c);
7420                 ocp_reg_write(tp, 0xb87e, 0x0153);
7421
7422                 /* EEE parameter */
7423                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS_2P5G, 0x0056);
7424
7425                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_USB_CFG);
7426                 ocp_data |= EN_XG_LIP | EN_G_LIP;
7427                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
7428
7429                 sram_write(tp, 0x8257, 0x020f); /*  XG PLL */
7430                 sram_write(tp, 0x80ea, 0x7843); /* GIGA Master */
7431
7432                 if (rtl_phy_patch_request(tp, true, true))
7433                         return;
7434
7435                 /* Advance EEE */
7436                 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
7437                 ocp_data |= EEE_SPDWN_EN;
7438                 ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
7439
7440                 data = ocp_reg_read(tp, OCP_DOWN_SPEED);
7441                 data &= ~(EN_EEE_100 | EN_EEE_1000);
7442                 data |= EN_10M_CLKDIV;
7443                 ocp_reg_write(tp, OCP_DOWN_SPEED, data);
7444                 tp->ups_info._10m_ckdiv = true;
7445                 tp->ups_info.eee_plloff_100 = false;
7446                 tp->ups_info.eee_plloff_giga = false;
7447
7448                 data = ocp_reg_read(tp, OCP_POWER_CFG);
7449                 data &= ~EEE_CLKDIV_EN;
7450                 ocp_reg_write(tp, OCP_POWER_CFG, data);
7451                 tp->ups_info.eee_ckdiv = false;
7452
7453                 ocp_reg_write(tp, OCP_SYSCLK_CFG, 0);
7454                 ocp_reg_write(tp, OCP_SYSCLK_CFG, sysclk_div_expo(5));
7455                 tp->ups_info._250m_ckdiv = false;
7456
7457                 rtl_phy_patch_request(tp, false, true);
7458
7459                 /* enable ADC Ibias Cal */
7460                 data = ocp_reg_read(tp, 0xd068);
7461                 data |= BIT(13);
7462                 ocp_reg_write(tp, 0xd068, data);
7463
7464                 /* enable Thermal Sensor */
7465                 data = sram_read(tp, 0x81a2);
7466                 data &= ~BIT(8);
7467                 sram_write(tp, 0x81a2, data);
7468                 data = ocp_reg_read(tp, 0xb54c);
7469                 data &= ~0xff00;
7470                 data |= 0xdb00;
7471                 ocp_reg_write(tp, 0xb54c, data);
7472
7473                 /* Nway 2.5G Lite */
7474                 data = ocp_reg_read(tp, 0xa454);
7475                 data &= ~BIT(0);
7476                 ocp_reg_write(tp, 0xa454, data);
7477
7478                 /* CS DSP solution */
7479                 data = ocp_reg_read(tp, OCP_10GBT_CTRL);
7480                 data |= RTL_ADV2_5G_F_R;
7481                 ocp_reg_write(tp, OCP_10GBT_CTRL, data);
7482                 data = ocp_reg_read(tp, 0xad4e);
7483                 data &= ~BIT(4);
7484                 ocp_reg_write(tp, 0xad4e, data);
7485                 data = ocp_reg_read(tp, 0xa86a);
7486                 data &= ~BIT(0);
7487                 ocp_reg_write(tp, 0xa86a, data);
7488
7489                 /* MDI SWAP */
7490                 if ((ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG) & MID_REVERSE) &&
7491                     (ocp_reg_read(tp, 0xd068) & BIT(1))) {
7492                         u16 swap_a, swap_b;
7493
7494                         data = ocp_reg_read(tp, 0xd068);
7495                         data &= ~0x1f;
7496                         data |= 0x1; /* p0 */
7497                         ocp_reg_write(tp, 0xd068, data);
7498                         swap_a = ocp_reg_read(tp, 0xd06a);
7499                         data &= ~0x18;
7500                         data |= 0x18; /* p3 */
7501                         ocp_reg_write(tp, 0xd068, data);
7502                         swap_b = ocp_reg_read(tp, 0xd06a);
7503                         data &= ~0x18; /* p0 */
7504                         ocp_reg_write(tp, 0xd068, data);
7505                         ocp_reg_write(tp, 0xd06a,
7506                                       (swap_a & ~0x7ff) | (swap_b & 0x7ff));
7507                         data |= 0x18; /* p3 */
7508                         ocp_reg_write(tp, 0xd068, data);
7509                         ocp_reg_write(tp, 0xd06a,
7510                                       (swap_b & ~0x7ff) | (swap_a & 0x7ff));
7511                         data &= ~0x18;
7512                         data |= 0x08; /* p1 */
7513                         ocp_reg_write(tp, 0xd068, data);
7514                         swap_a = ocp_reg_read(tp, 0xd06a);
7515                         data &= ~0x18;
7516                         data |= 0x10; /* p2 */
7517                         ocp_reg_write(tp, 0xd068, data);
7518                         swap_b = ocp_reg_read(tp, 0xd06a);
7519                         data &= ~0x18;
7520                         data |= 0x08; /* p1 */
7521                         ocp_reg_write(tp, 0xd068, data);
7522                         ocp_reg_write(tp, 0xd06a,
7523                                       (swap_a & ~0x7ff) | (swap_b & 0x7ff));
7524                         data &= ~0x18;
7525                         data |= 0x10; /* p2 */
7526                         ocp_reg_write(tp, 0xd068, data);
7527                         ocp_reg_write(tp, 0xd06a,
7528                                       (swap_b & ~0x7ff) | (swap_a & 0x7ff));
7529                         swap_a = ocp_reg_read(tp, 0xbd5a);
7530                         swap_b = ocp_reg_read(tp, 0xbd5c);
7531                         ocp_reg_write(tp, 0xbd5a, (swap_a & ~0x1f1f) |
7532                                       ((swap_b & 0x1f) << 8) |
7533                                       ((swap_b >> 8) & 0x1f));
7534                         ocp_reg_write(tp, 0xbd5c, (swap_b & ~0x1f1f) |
7535                                       ((swap_a & 0x1f) << 8) |
7536                                       ((swap_a >> 8) & 0x1f));
7537                         swap_a = ocp_reg_read(tp, 0xbc18);
7538                         swap_b = ocp_reg_read(tp, 0xbc1a);
7539                         ocp_reg_write(tp, 0xbc18, (swap_a & ~0x1f1f) |
7540                                       ((swap_b & 0x1f) << 8) |
7541                                       ((swap_b >> 8) & 0x1f));
7542                         ocp_reg_write(tp, 0xbc1a, (swap_b & ~0x1f1f) |
7543                                       ((swap_a & 0x1f) << 8) |
7544                                       ((swap_a >> 8) & 0x1f));
7545                 }
7546
7547                 /* Notify the MAC when the speed is changed to force mode. */
7548                 data = ocp_reg_read(tp, OCP_INTR_EN);
7549                 data |= INTR_SPEED_FORCE;
7550                 ocp_reg_write(tp, OCP_INTR_EN, data);
7551                 break;
7552         default:
7553                 break;
7554         }
7555
7556         rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
7557
7558         data = ocp_reg_read(tp, 0xa428);
7559         data &= ~BIT(9);
7560         ocp_reg_write(tp, 0xa428, data);
7561         data = ocp_reg_read(tp, 0xa5ea);
7562         data &= ~BIT(0);
7563         ocp_reg_write(tp, 0xa5ea, data);
7564         tp->ups_info.lite_mode = 0;
7565
7566         if (tp->eee_en)
7567                 rtl_eee_enable(tp, true);
7568
7569         r8153_aldps_en(tp, true);
7570         r8152b_enable_fc(tp);
7571         r8153_u2p3en(tp, true);
7572
7573         set_bit(PHY_RESET, &tp->flags);
7574 }
7575
7576 static void r8156b_hw_phy_cfg(struct r8152 *tp)
7577 {
7578         u32 ocp_data;
7579         u16 data;
7580
7581         switch (tp->version) {
7582         case RTL_VER_12:
7583                 ocp_reg_write(tp, 0xbf86, 0x9000);
7584                 data = ocp_reg_read(tp, 0xc402);
7585                 data |= BIT(10);
7586                 ocp_reg_write(tp, 0xc402, data);
7587                 data &= ~BIT(10);
7588                 ocp_reg_write(tp, 0xc402, data);
7589                 ocp_reg_write(tp, 0xbd86, 0x1010);
7590                 ocp_reg_write(tp, 0xbd88, 0x1010);
7591                 data = ocp_reg_read(tp, 0xbd4e);
7592                 data &= ~(BIT(10) | BIT(11));
7593                 data |= BIT(11);
7594                 ocp_reg_write(tp, 0xbd4e, data);
7595                 data = ocp_reg_read(tp, 0xbf46);
7596                 data &= ~0xf00;
7597                 data |= 0x700;
7598                 ocp_reg_write(tp, 0xbf46, data);
7599                 break;
7600         case RTL_VER_13:
7601         case RTL_VER_15:
7602                 r8156b_wait_loading_flash(tp);
7603                 break;
7604         default:
7605                 break;
7606         }
7607
7608         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
7609         if (ocp_data & PCUT_STATUS) {
7610                 ocp_data &= ~PCUT_STATUS;
7611                 ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
7612         }
7613
7614         data = r8153_phy_status(tp, 0);
7615         switch (data) {
7616         case PHY_STAT_EXT_INIT:
7617                 rtl8152_apply_firmware(tp, true);
7618
7619                 data = ocp_reg_read(tp, 0xa466);
7620                 data &= ~BIT(0);
7621                 ocp_reg_write(tp, 0xa466, data);
7622
7623                 data = ocp_reg_read(tp, 0xa468);
7624                 data &= ~(BIT(3) | BIT(1));
7625                 ocp_reg_write(tp, 0xa468, data);
7626                 break;
7627         case PHY_STAT_LAN_ON:
7628         case PHY_STAT_PWRDN:
7629         default:
7630                 rtl8152_apply_firmware(tp, false);
7631                 break;
7632         }
7633
7634         data = r8152_mdio_read(tp, MII_BMCR);
7635         if (data & BMCR_PDOWN) {
7636                 data &= ~BMCR_PDOWN;
7637                 r8152_mdio_write(tp, MII_BMCR, data);
7638         }
7639
7640         /* disable ALDPS before updating the PHY parameters */
7641         r8153_aldps_en(tp, false);
7642
7643         /* disable EEE before updating the PHY parameters */
7644         rtl_eee_enable(tp, false);
7645
7646         data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
7647         WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
7648
7649         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
7650         ocp_data |= PFM_PWM_SWITCH;
7651         ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
7652
7653         switch (tp->version) {
7654         case RTL_VER_12:
7655                 data = ocp_reg_read(tp, 0xbc08);
7656                 data |= BIT(3) | BIT(2);
7657                 ocp_reg_write(tp, 0xbc08, data);
7658
7659                 data = sram_read(tp, 0x8fff);
7660                 data &= ~0xff00;
7661                 data |= 0x0400;
7662                 sram_write(tp, 0x8fff, data);
7663
7664                 data = ocp_reg_read(tp, 0xacda);
7665                 data |= 0xff00;
7666                 ocp_reg_write(tp, 0xacda, data);
7667                 data = ocp_reg_read(tp, 0xacde);
7668                 data |= 0xf000;
7669                 ocp_reg_write(tp, 0xacde, data);
7670                 ocp_reg_write(tp, 0xac8c, 0x0ffc);
7671                 ocp_reg_write(tp, 0xac46, 0xb7b4);
7672                 ocp_reg_write(tp, 0xac50, 0x0fbc);
7673                 ocp_reg_write(tp, 0xac3c, 0x9240);
7674                 ocp_reg_write(tp, 0xac4e, 0x0db4);
7675                 ocp_reg_write(tp, 0xacc6, 0x0707);
7676                 ocp_reg_write(tp, 0xacc8, 0xa0d3);
7677                 ocp_reg_write(tp, 0xad08, 0x0007);
7678
7679                 ocp_reg_write(tp, 0xb87c, 0x8560);
7680                 ocp_reg_write(tp, 0xb87e, 0x19cc);
7681                 ocp_reg_write(tp, 0xb87c, 0x8562);
7682                 ocp_reg_write(tp, 0xb87e, 0x19cc);
7683                 ocp_reg_write(tp, 0xb87c, 0x8564);
7684                 ocp_reg_write(tp, 0xb87e, 0x19cc);
7685                 ocp_reg_write(tp, 0xb87c, 0x8566);
7686                 ocp_reg_write(tp, 0xb87e, 0x147d);
7687                 ocp_reg_write(tp, 0xb87c, 0x8568);
7688                 ocp_reg_write(tp, 0xb87e, 0x147d);
7689                 ocp_reg_write(tp, 0xb87c, 0x856a);
7690                 ocp_reg_write(tp, 0xb87e, 0x147d);
7691                 ocp_reg_write(tp, 0xb87c, 0x8ffe);
7692                 ocp_reg_write(tp, 0xb87e, 0x0907);
7693                 ocp_reg_write(tp, 0xb87c, 0x80d6);
7694                 ocp_reg_write(tp, 0xb87e, 0x2801);
7695                 ocp_reg_write(tp, 0xb87c, 0x80f2);
7696                 ocp_reg_write(tp, 0xb87e, 0x2801);
7697                 ocp_reg_write(tp, 0xb87c, 0x80f4);
7698                 ocp_reg_write(tp, 0xb87e, 0x6077);
7699                 ocp_reg_write(tp, 0xb506, 0x01e7);
7700
7701                 ocp_reg_write(tp, 0xb87c, 0x8013);
7702                 ocp_reg_write(tp, 0xb87e, 0x0700);
7703                 ocp_reg_write(tp, 0xb87c, 0x8fb9);
7704                 ocp_reg_write(tp, 0xb87e, 0x2801);
7705                 ocp_reg_write(tp, 0xb87c, 0x8fba);
7706                 ocp_reg_write(tp, 0xb87e, 0x0100);
7707                 ocp_reg_write(tp, 0xb87c, 0x8fbc);
7708                 ocp_reg_write(tp, 0xb87e, 0x1900);
7709                 ocp_reg_write(tp, 0xb87c, 0x8fbe);
7710                 ocp_reg_write(tp, 0xb87e, 0xe100);
7711                 ocp_reg_write(tp, 0xb87c, 0x8fc0);
7712                 ocp_reg_write(tp, 0xb87e, 0x0800);
7713                 ocp_reg_write(tp, 0xb87c, 0x8fc2);
7714                 ocp_reg_write(tp, 0xb87e, 0xe500);
7715                 ocp_reg_write(tp, 0xb87c, 0x8fc4);
7716                 ocp_reg_write(tp, 0xb87e, 0x0f00);
7717                 ocp_reg_write(tp, 0xb87c, 0x8fc6);
7718                 ocp_reg_write(tp, 0xb87e, 0xf100);
7719                 ocp_reg_write(tp, 0xb87c, 0x8fc8);
7720                 ocp_reg_write(tp, 0xb87e, 0x0400);
7721                 ocp_reg_write(tp, 0xb87c, 0x8fca);
7722                 ocp_reg_write(tp, 0xb87e, 0xf300);
7723                 ocp_reg_write(tp, 0xb87c, 0x8fcc);
7724                 ocp_reg_write(tp, 0xb87e, 0xfd00);
7725                 ocp_reg_write(tp, 0xb87c, 0x8fce);
7726                 ocp_reg_write(tp, 0xb87e, 0xff00);
7727                 ocp_reg_write(tp, 0xb87c, 0x8fd0);
7728                 ocp_reg_write(tp, 0xb87e, 0xfb00);
7729                 ocp_reg_write(tp, 0xb87c, 0x8fd2);
7730                 ocp_reg_write(tp, 0xb87e, 0x0100);
7731                 ocp_reg_write(tp, 0xb87c, 0x8fd4);
7732                 ocp_reg_write(tp, 0xb87e, 0xf400);
7733                 ocp_reg_write(tp, 0xb87c, 0x8fd6);
7734                 ocp_reg_write(tp, 0xb87e, 0xff00);
7735                 ocp_reg_write(tp, 0xb87c, 0x8fd8);
7736                 ocp_reg_write(tp, 0xb87e, 0xf600);
7737
7738                 ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG);
7739                 ocp_data |= EN_XG_LIP | EN_G_LIP;
7740                 ocp_write_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
7741                 ocp_reg_write(tp, 0xb87c, 0x813d);
7742                 ocp_reg_write(tp, 0xb87e, 0x390e);
7743                 ocp_reg_write(tp, 0xb87c, 0x814f);
7744                 ocp_reg_write(tp, 0xb87e, 0x790e);
7745                 ocp_reg_write(tp, 0xb87c, 0x80b0);
7746                 ocp_reg_write(tp, 0xb87e, 0x0f31);
7747                 data = ocp_reg_read(tp, 0xbf4c);
7748                 data |= BIT(1);
7749                 ocp_reg_write(tp, 0xbf4c, data);
7750                 data = ocp_reg_read(tp, 0xbcca);
7751                 data |= BIT(9) | BIT(8);
7752                 ocp_reg_write(tp, 0xbcca, data);
7753                 ocp_reg_write(tp, 0xb87c, 0x8141);
7754                 ocp_reg_write(tp, 0xb87e, 0x320e);
7755                 ocp_reg_write(tp, 0xb87c, 0x8153);
7756                 ocp_reg_write(tp, 0xb87e, 0x720e);
7757                 ocp_reg_write(tp, 0xb87c, 0x8529);
7758                 ocp_reg_write(tp, 0xb87e, 0x050e);
7759                 data = ocp_reg_read(tp, OCP_EEE_CFG);
7760                 data &= ~CTAP_SHORT_EN;
7761                 ocp_reg_write(tp, OCP_EEE_CFG, data);
7762
7763                 sram_write(tp, 0x816c, 0xc4a0);
7764                 sram_write(tp, 0x8170, 0xc4a0);
7765                 sram_write(tp, 0x8174, 0x04a0);
7766                 sram_write(tp, 0x8178, 0x04a0);
7767                 sram_write(tp, 0x817c, 0x0719);
7768                 sram_write(tp, 0x8ff4, 0x0400);
7769                 sram_write(tp, 0x8ff1, 0x0404);
7770
7771                 ocp_reg_write(tp, 0xbf4a, 0x001b);
7772                 ocp_reg_write(tp, 0xb87c, 0x8033);
7773                 ocp_reg_write(tp, 0xb87e, 0x7c13);
7774                 ocp_reg_write(tp, 0xb87c, 0x8037);
7775                 ocp_reg_write(tp, 0xb87e, 0x7c13);
7776                 ocp_reg_write(tp, 0xb87c, 0x803b);
7777                 ocp_reg_write(tp, 0xb87e, 0xfc32);
7778                 ocp_reg_write(tp, 0xb87c, 0x803f);
7779                 ocp_reg_write(tp, 0xb87e, 0x7c13);
7780                 ocp_reg_write(tp, 0xb87c, 0x8043);
7781                 ocp_reg_write(tp, 0xb87e, 0x7c13);
7782                 ocp_reg_write(tp, 0xb87c, 0x8047);
7783                 ocp_reg_write(tp, 0xb87e, 0x7c13);
7784
7785                 ocp_reg_write(tp, 0xb87c, 0x8145);
7786                 ocp_reg_write(tp, 0xb87e, 0x370e);
7787                 ocp_reg_write(tp, 0xb87c, 0x8157);
7788                 ocp_reg_write(tp, 0xb87e, 0x770e);
7789                 ocp_reg_write(tp, 0xb87c, 0x8169);
7790                 ocp_reg_write(tp, 0xb87e, 0x0d0a);
7791                 ocp_reg_write(tp, 0xb87c, 0x817b);
7792                 ocp_reg_write(tp, 0xb87e, 0x1d0a);
7793
7794                 data = sram_read(tp, 0x8217);
7795                 data &= ~0xff00;
7796                 data |= 0x5000;
7797                 sram_write(tp, 0x8217, data);
7798                 data = sram_read(tp, 0x821a);
7799                 data &= ~0xff00;
7800                 data |= 0x5000;
7801                 sram_write(tp, 0x821a, data);
7802                 sram_write(tp, 0x80da, 0x0403);
7803                 data = sram_read(tp, 0x80dc);
7804                 data &= ~0xff00;
7805                 data |= 0x1000;
7806                 sram_write(tp, 0x80dc, data);
7807                 sram_write(tp, 0x80b3, 0x0384);
7808                 sram_write(tp, 0x80b7, 0x2007);
7809                 data = sram_read(tp, 0x80ba);
7810                 data &= ~0xff00;
7811                 data |= 0x6c00;
7812                 sram_write(tp, 0x80ba, data);
7813                 sram_write(tp, 0x80b5, 0xf009);
7814                 data = sram_read(tp, 0x80bd);
7815                 data &= ~0xff00;
7816                 data |= 0x9f00;
7817                 sram_write(tp, 0x80bd, data);
7818                 sram_write(tp, 0x80c7, 0xf083);
7819                 sram_write(tp, 0x80dd, 0x03f0);
7820                 data = sram_read(tp, 0x80df);
7821                 data &= ~0xff00;
7822                 data |= 0x1000;
7823                 sram_write(tp, 0x80df, data);
7824                 sram_write(tp, 0x80cb, 0x2007);
7825                 data = sram_read(tp, 0x80ce);
7826                 data &= ~0xff00;
7827                 data |= 0x6c00;
7828                 sram_write(tp, 0x80ce, data);
7829                 sram_write(tp, 0x80c9, 0x8009);
7830                 data = sram_read(tp, 0x80d1);
7831                 data &= ~0xff00;
7832                 data |= 0x8000;
7833                 sram_write(tp, 0x80d1, data);
7834                 sram_write(tp, 0x80a3, 0x200a);
7835                 sram_write(tp, 0x80a5, 0xf0ad);
7836                 sram_write(tp, 0x809f, 0x6073);
7837                 sram_write(tp, 0x80a1, 0x000b);
7838                 data = sram_read(tp, 0x80a9);
7839                 data &= ~0xff00;
7840                 data |= 0xc000;
7841                 sram_write(tp, 0x80a9, data);
7842
7843                 if (rtl_phy_patch_request(tp, true, true))
7844                         return;
7845
7846                 data = ocp_reg_read(tp, 0xb896);
7847                 data &= ~BIT(0);
7848                 ocp_reg_write(tp, 0xb896, data);
7849                 data = ocp_reg_read(tp, 0xb892);
7850                 data &= ~0xff00;
7851                 ocp_reg_write(tp, 0xb892, data);
7852                 ocp_reg_write(tp, 0xb88e, 0xc23e);
7853                 ocp_reg_write(tp, 0xb890, 0x0000);
7854                 ocp_reg_write(tp, 0xb88e, 0xc240);
7855                 ocp_reg_write(tp, 0xb890, 0x0103);
7856                 ocp_reg_write(tp, 0xb88e, 0xc242);
7857                 ocp_reg_write(tp, 0xb890, 0x0507);
7858                 ocp_reg_write(tp, 0xb88e, 0xc244);
7859                 ocp_reg_write(tp, 0xb890, 0x090b);
7860                 ocp_reg_write(tp, 0xb88e, 0xc246);
7861                 ocp_reg_write(tp, 0xb890, 0x0c0e);
7862                 ocp_reg_write(tp, 0xb88e, 0xc248);
7863                 ocp_reg_write(tp, 0xb890, 0x1012);
7864                 ocp_reg_write(tp, 0xb88e, 0xc24a);
7865                 ocp_reg_write(tp, 0xb890, 0x1416);
7866                 data = ocp_reg_read(tp, 0xb896);
7867                 data |= BIT(0);
7868                 ocp_reg_write(tp, 0xb896, data);
7869
7870                 rtl_phy_patch_request(tp, false, true);
7871
7872                 data = ocp_reg_read(tp, 0xa86a);
7873                 data |= BIT(0);
7874                 ocp_reg_write(tp, 0xa86a, data);
7875                 data = ocp_reg_read(tp, 0xa6f0);
7876                 data |= BIT(0);
7877                 ocp_reg_write(tp, 0xa6f0, data);
7878
7879                 ocp_reg_write(tp, 0xbfa0, 0xd70d);
7880                 ocp_reg_write(tp, 0xbfa2, 0x4100);
7881                 ocp_reg_write(tp, 0xbfa4, 0xe868);
7882                 ocp_reg_write(tp, 0xbfa6, 0xdc59);
7883                 ocp_reg_write(tp, 0xb54c, 0x3c18);
7884                 data = ocp_reg_read(tp, 0xbfa4);
7885                 data &= ~BIT(5);
7886                 ocp_reg_write(tp, 0xbfa4, data);
7887                 data = sram_read(tp, 0x817d);
7888                 data |= BIT(12);
7889                 sram_write(tp, 0x817d, data);
7890                 break;
7891         case RTL_VER_13:
7892                 /* 2.5G INRX */
7893                 data = ocp_reg_read(tp, 0xac46);
7894                 data &= ~0x00f0;
7895                 data |= 0x0090;
7896                 ocp_reg_write(tp, 0xac46, data);
7897                 data = ocp_reg_read(tp, 0xad30);
7898                 data &= ~0x0003;
7899                 data |= 0x0001;
7900                 ocp_reg_write(tp, 0xad30, data);
7901                 fallthrough;
7902         case RTL_VER_15:
7903                 /* EEE parameter */
7904                 ocp_reg_write(tp, 0xb87c, 0x80f5);
7905                 ocp_reg_write(tp, 0xb87e, 0x760e);
7906                 ocp_reg_write(tp, 0xb87c, 0x8107);
7907                 ocp_reg_write(tp, 0xb87e, 0x360e);
7908                 ocp_reg_write(tp, 0xb87c, 0x8551);
7909                 data = ocp_reg_read(tp, 0xb87e);
7910                 data &= ~0xff00;
7911                 data |= 0x0800;
7912                 ocp_reg_write(tp, 0xb87e, data);
7913
7914                 /* ADC_PGA parameter */
7915                 data = ocp_reg_read(tp, 0xbf00);
7916                 data &= ~0xe000;
7917                 data |= 0xa000;
7918                 ocp_reg_write(tp, 0xbf00, data);
7919                 data = ocp_reg_read(tp, 0xbf46);
7920                 data &= ~0x0f00;
7921                 data |= 0x0300;
7922                 ocp_reg_write(tp, 0xbf46, data);
7923
7924                 /* Green Table-PGA, 1G full viterbi */
7925                 sram_write(tp, 0x8044, 0x2417);
7926                 sram_write(tp, 0x804a, 0x2417);
7927                 sram_write(tp, 0x8050, 0x2417);
7928                 sram_write(tp, 0x8056, 0x2417);
7929                 sram_write(tp, 0x805c, 0x2417);
7930                 sram_write(tp, 0x8062, 0x2417);
7931                 sram_write(tp, 0x8068, 0x2417);
7932                 sram_write(tp, 0x806e, 0x2417);
7933                 sram_write(tp, 0x8074, 0x2417);
7934                 sram_write(tp, 0x807a, 0x2417);
7935
7936                 /* XG PLL */
7937                 data = ocp_reg_read(tp, 0xbf84);
7938                 data &= ~0xe000;
7939                 data |= 0xa000;
7940                 ocp_reg_write(tp, 0xbf84, data);
7941                 break;
7942         default:
7943                 break;
7944         }
7945
7946         /* Notify the MAC when the speed is changed to force mode. */
7947         data = ocp_reg_read(tp, OCP_INTR_EN);
7948         data |= INTR_SPEED_FORCE;
7949         ocp_reg_write(tp, OCP_INTR_EN, data);
7950
7951         if (rtl_phy_patch_request(tp, true, true))
7952                 return;
7953
7954         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
7955         ocp_data |= EEE_SPDWN_EN;
7956         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
7957
7958         data = ocp_reg_read(tp, OCP_DOWN_SPEED);
7959         data &= ~(EN_EEE_100 | EN_EEE_1000);
7960         data |= EN_10M_CLKDIV;
7961         ocp_reg_write(tp, OCP_DOWN_SPEED, data);
7962         tp->ups_info._10m_ckdiv = true;
7963         tp->ups_info.eee_plloff_100 = false;
7964         tp->ups_info.eee_plloff_giga = false;
7965
7966         data = ocp_reg_read(tp, OCP_POWER_CFG);
7967         data &= ~EEE_CLKDIV_EN;
7968         ocp_reg_write(tp, OCP_POWER_CFG, data);
7969         tp->ups_info.eee_ckdiv = false;
7970
7971         rtl_phy_patch_request(tp, false, true);
7972
7973         rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
7974
7975         data = ocp_reg_read(tp, 0xa428);
7976         data &= ~BIT(9);
7977         ocp_reg_write(tp, 0xa428, data);
7978         data = ocp_reg_read(tp, 0xa5ea);
7979         data &= ~BIT(0);
7980         ocp_reg_write(tp, 0xa5ea, data);
7981         tp->ups_info.lite_mode = 0;
7982
7983         if (tp->eee_en)
7984                 rtl_eee_enable(tp, true);
7985
7986         r8153_aldps_en(tp, true);
7987         r8152b_enable_fc(tp);
7988         r8153_u2p3en(tp, true);
7989
7990         set_bit(PHY_RESET, &tp->flags);
7991 }
7992
7993 static void r8156_init(struct r8152 *tp)
7994 {
7995         u32 ocp_data;
7996         u16 data;
7997         int i;
7998
7999         if (test_bit(RTL8152_UNPLUG, &tp->flags))
8000                 return;
8001
8002         ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
8003         ocp_data &= ~EN_ALL_SPEED;
8004         ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
8005
8006         ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
8007
8008         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
8009         ocp_data |= BYPASS_MAC_RESET;
8010         ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
8011
8012         r8153b_u1u2en(tp, false);
8013
8014         for (i = 0; i < 500; i++) {
8015                 if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
8016                     AUTOLOAD_DONE)
8017                         break;
8018
8019                 msleep(20);
8020                 if (test_bit(RTL8152_UNPLUG, &tp->flags))
8021                         return;
8022         }
8023
8024         data = r8153_phy_status(tp, 0);
8025         if (data == PHY_STAT_EXT_INIT) {
8026                 data = ocp_reg_read(tp, 0xa468);
8027                 data &= ~(BIT(3) | BIT(1));
8028                 ocp_reg_write(tp, 0xa468, data);
8029         }
8030
8031         data = r8152_mdio_read(tp, MII_BMCR);
8032         if (data & BMCR_PDOWN) {
8033                 data &= ~BMCR_PDOWN;
8034                 r8152_mdio_write(tp, MII_BMCR, data);
8035         }
8036
8037         data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
8038         WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
8039
8040         r8153_u2p3en(tp, false);
8041
8042         /* MSC timer = 0xfff * 8ms = 32760 ms */
8043         ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
8044
8045         /* U1/U2/L1 idle timer. 500 us */
8046         ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
8047
8048         r8153b_power_cut_en(tp, false);
8049         r8156_ups_en(tp, false);
8050         r8153_queue_wake(tp, false);
8051         rtl_runtime_suspend_enable(tp, false);
8052
8053         if (tp->udev->speed >= USB_SPEED_SUPER)
8054                 r8153b_u1u2en(tp, true);
8055
8056         usb_enable_lpm(tp->udev);
8057
8058         r8156_mac_clk_spd(tp, true);
8059
8060         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
8061         ocp_data &= ~PLA_MCU_SPDWN_EN;
8062         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
8063
8064         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
8065         if (rtl8152_get_speed(tp) & LINK_STATUS)
8066                 ocp_data |= CUR_LINK_OK;
8067         else
8068                 ocp_data &= ~CUR_LINK_OK;
8069         ocp_data |= POLL_LINK_CHG;
8070         ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
8071
8072         set_bit(GREEN_ETHERNET, &tp->flags);
8073
8074         /* rx aggregation */
8075         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
8076         ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
8077         ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
8078
8079         ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
8080         ocp_data |= ACT_ODMA;
8081         ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
8082
8083         r8156_mdio_force_mode(tp);
8084         rtl_tally_reset(tp);
8085
8086         tp->coalesce = 15000;   /* 15 us */
8087 }
8088
8089 static void r8156b_init(struct r8152 *tp)
8090 {
8091         u32 ocp_data;
8092         u16 data;
8093         int i;
8094
8095         if (test_bit(RTL8152_UNPLUG, &tp->flags))
8096                 return;
8097
8098         ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
8099         ocp_data &= ~EN_ALL_SPEED;
8100         ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
8101
8102         ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
8103
8104         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
8105         ocp_data |= BYPASS_MAC_RESET;
8106         ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
8107
8108         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
8109         ocp_data |= RX_DETECT8;
8110         ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
8111
8112         r8153b_u1u2en(tp, false);
8113
8114         switch (tp->version) {
8115         case RTL_VER_13:
8116         case RTL_VER_15:
8117                 r8156b_wait_loading_flash(tp);
8118                 break;
8119         default:
8120                 break;
8121         }
8122
8123         for (i = 0; i < 500; i++) {
8124                 if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
8125                     AUTOLOAD_DONE)
8126                         break;
8127
8128                 msleep(20);
8129                 if (test_bit(RTL8152_UNPLUG, &tp->flags))
8130                         return;
8131         }
8132
8133         data = r8153_phy_status(tp, 0);
8134         if (data == PHY_STAT_EXT_INIT) {
8135                 data = ocp_reg_read(tp, 0xa468);
8136                 data &= ~(BIT(3) | BIT(1));
8137                 ocp_reg_write(tp, 0xa468, data);
8138
8139                 data = ocp_reg_read(tp, 0xa466);
8140                 data &= ~BIT(0);
8141                 ocp_reg_write(tp, 0xa466, data);
8142         }
8143
8144         data = r8152_mdio_read(tp, MII_BMCR);
8145         if (data & BMCR_PDOWN) {
8146                 data &= ~BMCR_PDOWN;
8147                 r8152_mdio_write(tp, MII_BMCR, data);
8148         }
8149
8150         data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
8151
8152         r8153_u2p3en(tp, false);
8153
8154         /* MSC timer = 0xfff * 8ms = 32760 ms */
8155         ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
8156
8157         /* U1/U2/L1 idle timer. 500 us */
8158         ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
8159
8160         r8153b_power_cut_en(tp, false);
8161         r8156_ups_en(tp, false);
8162         r8153_queue_wake(tp, false);
8163         rtl_runtime_suspend_enable(tp, false);
8164
8165         if (tp->udev->speed >= USB_SPEED_SUPER)
8166                 r8153b_u1u2en(tp, true);
8167
8168         usb_enable_lpm(tp->udev);
8169
8170         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR);
8171         ocp_data &= ~SLOT_EN;
8172         ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
8173
8174         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
8175         ocp_data |= FLOW_CTRL_EN;
8176         ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
8177
8178         /* enable fc timer and set timer to 600 ms. */
8179         ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
8180                        CTRL_TIMER_EN | (600 / 8));
8181
8182         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
8183         if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & DACK_DET_EN))
8184                 ocp_data |= FLOW_CTRL_PATCH_2;
8185         ocp_data &= ~AUTO_SPEEDUP;
8186         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
8187
8188         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
8189         ocp_data |= FC_PATCH_TASK;
8190         ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
8191
8192         r8156_mac_clk_spd(tp, true);
8193
8194         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
8195         ocp_data &= ~PLA_MCU_SPDWN_EN;
8196         ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
8197
8198         ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
8199         if (rtl8152_get_speed(tp) & LINK_STATUS)
8200                 ocp_data |= CUR_LINK_OK;
8201         else
8202                 ocp_data &= ~CUR_LINK_OK;
8203         ocp_data |= POLL_LINK_CHG;
8204         ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
8205
8206         set_bit(GREEN_ETHERNET, &tp->flags);
8207
8208         /* rx aggregation */
8209         ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
8210         ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
8211         ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
8212
8213         r8156_mdio_force_mode(tp);
8214         rtl_tally_reset(tp);
8215
8216         tp->coalesce = 15000;   /* 15 us */
8217 }
8218
8219 static bool rtl_check_vendor_ok(struct usb_interface *intf)
8220 {
8221         struct usb_host_interface *alt = intf->cur_altsetting;
8222         struct usb_endpoint_descriptor *in, *out, *intr;
8223
8224         if (usb_find_common_endpoints(alt, &in, &out, &intr, NULL) < 0) {
8225                 dev_err(&intf->dev, "Expected endpoints are not found\n");
8226                 return false;
8227         }
8228
8229         /* Check Rx endpoint address */
8230         if (usb_endpoint_num(in) != 1) {
8231                 dev_err(&intf->dev, "Invalid Rx endpoint address\n");
8232                 return false;
8233         }
8234
8235         /* Check Tx endpoint address */
8236         if (usb_endpoint_num(out) != 2) {
8237                 dev_err(&intf->dev, "Invalid Tx endpoint address\n");
8238                 return false;
8239         }
8240
8241         /* Check interrupt endpoint address */
8242         if (usb_endpoint_num(intr) != 3) {
8243                 dev_err(&intf->dev, "Invalid interrupt endpoint address\n");
8244                 return false;
8245         }
8246
8247         return true;
8248 }
8249
8250 static int rtl8152_pre_reset(struct usb_interface *intf)
8251 {
8252         struct r8152 *tp = usb_get_intfdata(intf);
8253         struct net_device *netdev;
8254
8255         if (!tp)
8256                 return 0;
8257
8258         netdev = tp->netdev;
8259         if (!netif_running(netdev))
8260                 return 0;
8261
8262         netif_stop_queue(netdev);
8263         tasklet_disable(&tp->tx_tl);
8264         clear_bit(WORK_ENABLE, &tp->flags);
8265         usb_kill_urb(tp->intr_urb);
8266         cancel_delayed_work_sync(&tp->schedule);
8267         napi_disable(&tp->napi);
8268         if (netif_carrier_ok(netdev)) {
8269                 mutex_lock(&tp->control);
8270                 tp->rtl_ops.disable(tp);
8271                 mutex_unlock(&tp->control);
8272         }
8273
8274         return 0;
8275 }
8276
8277 static int rtl8152_post_reset(struct usb_interface *intf)
8278 {
8279         struct r8152 *tp = usb_get_intfdata(intf);
8280         struct net_device *netdev;
8281         struct sockaddr sa;
8282
8283         if (!tp)
8284                 return 0;
8285
8286         /* reset the MAC address in case of policy change */
8287         if (determine_ethernet_addr(tp, &sa) >= 0) {
8288                 rtnl_lock();
8289                 dev_set_mac_address (tp->netdev, &sa, NULL);
8290                 rtnl_unlock();
8291         }
8292
8293         netdev = tp->netdev;
8294         if (!netif_running(netdev))
8295                 return 0;
8296
8297         set_bit(WORK_ENABLE, &tp->flags);
8298         if (netif_carrier_ok(netdev)) {
8299                 mutex_lock(&tp->control);
8300                 tp->rtl_ops.enable(tp);
8301                 rtl_start_rx(tp);
8302                 _rtl8152_set_rx_mode(netdev);
8303                 mutex_unlock(&tp->control);
8304         }
8305
8306         napi_enable(&tp->napi);
8307         tasklet_enable(&tp->tx_tl);
8308         netif_wake_queue(netdev);
8309         usb_submit_urb(tp->intr_urb, GFP_KERNEL);
8310
8311         if (!list_empty(&tp->rx_done))
8312                 napi_schedule(&tp->napi);
8313
8314         return 0;
8315 }
8316
8317 static bool delay_autosuspend(struct r8152 *tp)
8318 {
8319         bool sw_linking = !!netif_carrier_ok(tp->netdev);
8320         bool hw_linking = !!(rtl8152_get_speed(tp) & LINK_STATUS);
8321
8322         /* This means a linking change occurs and the driver doesn't detect it,
8323          * yet. If the driver has disabled tx/rx and hw is linking on, the
8324          * device wouldn't wake up by receiving any packet.
8325          */
8326         if (work_busy(&tp->schedule.work) || sw_linking != hw_linking)
8327                 return true;
8328
8329         /* If the linking down is occurred by nway, the device may miss the
8330          * linking change event. And it wouldn't wake when linking on.
8331          */
8332         if (!sw_linking && tp->rtl_ops.in_nway(tp))
8333                 return true;
8334         else if (!skb_queue_empty(&tp->tx_queue))
8335                 return true;
8336         else
8337                 return false;
8338 }
8339
8340 static int rtl8152_runtime_resume(struct r8152 *tp)
8341 {
8342         struct net_device *netdev = tp->netdev;
8343
8344         if (netif_running(netdev) && netdev->flags & IFF_UP) {
8345                 struct napi_struct *napi = &tp->napi;
8346
8347                 tp->rtl_ops.autosuspend_en(tp, false);
8348                 napi_disable(napi);
8349                 set_bit(WORK_ENABLE, &tp->flags);
8350
8351                 if (netif_carrier_ok(netdev)) {
8352                         if (rtl8152_get_speed(tp) & LINK_STATUS) {
8353                                 rtl_start_rx(tp);
8354                         } else {
8355                                 netif_carrier_off(netdev);
8356                                 tp->rtl_ops.disable(tp);
8357                                 netif_info(tp, link, netdev, "linking down\n");
8358                         }
8359                 }
8360
8361                 napi_enable(napi);
8362                 clear_bit(SELECTIVE_SUSPEND, &tp->flags);
8363                 smp_mb__after_atomic();
8364
8365                 if (!list_empty(&tp->rx_done))
8366                         napi_schedule(&tp->napi);
8367
8368                 usb_submit_urb(tp->intr_urb, GFP_NOIO);
8369         } else {
8370                 if (netdev->flags & IFF_UP)
8371                         tp->rtl_ops.autosuspend_en(tp, false);
8372
8373                 clear_bit(SELECTIVE_SUSPEND, &tp->flags);
8374         }
8375
8376         return 0;
8377 }
8378
8379 static int rtl8152_system_resume(struct r8152 *tp)
8380 {
8381         struct net_device *netdev = tp->netdev;
8382
8383         netif_device_attach(netdev);
8384
8385         if (netif_running(netdev) && (netdev->flags & IFF_UP)) {
8386                 tp->rtl_ops.up(tp);
8387                 netif_carrier_off(netdev);
8388                 set_bit(WORK_ENABLE, &tp->flags);
8389                 usb_submit_urb(tp->intr_urb, GFP_NOIO);
8390         }
8391
8392         return 0;
8393 }
8394
8395 static int rtl8152_runtime_suspend(struct r8152 *tp)
8396 {
8397         struct net_device *netdev = tp->netdev;
8398         int ret = 0;
8399
8400         if (!tp->rtl_ops.autosuspend_en)
8401                 return -EBUSY;
8402
8403         set_bit(SELECTIVE_SUSPEND, &tp->flags);
8404         smp_mb__after_atomic();
8405
8406         if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
8407                 u32 rcr = 0;
8408
8409                 if (netif_carrier_ok(netdev)) {
8410                         u32 ocp_data;
8411
8412                         rcr = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
8413                         ocp_data = rcr & ~RCR_ACPT_ALL;
8414                         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
8415                         rxdy_gated_en(tp, true);
8416                         ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA,
8417                                                  PLA_OOB_CTRL);
8418                         if (!(ocp_data & RXFIFO_EMPTY)) {
8419                                 rxdy_gated_en(tp, false);
8420                                 ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr);
8421                                 clear_bit(SELECTIVE_SUSPEND, &tp->flags);
8422                                 smp_mb__after_atomic();
8423                                 ret = -EBUSY;
8424                                 goto out1;
8425                         }
8426                 }
8427
8428                 clear_bit(WORK_ENABLE, &tp->flags);
8429                 usb_kill_urb(tp->intr_urb);
8430
8431                 tp->rtl_ops.autosuspend_en(tp, true);
8432
8433                 if (netif_carrier_ok(netdev)) {
8434                         struct napi_struct *napi = &tp->napi;
8435
8436                         napi_disable(napi);
8437                         rtl_stop_rx(tp);
8438                         rxdy_gated_en(tp, false);
8439                         ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr);
8440                         napi_enable(napi);
8441                 }
8442
8443                 if (delay_autosuspend(tp)) {
8444                         rtl8152_runtime_resume(tp);
8445                         ret = -EBUSY;
8446                 }
8447         }
8448
8449 out1:
8450         return ret;
8451 }
8452
8453 static int rtl8152_system_suspend(struct r8152 *tp)
8454 {
8455         struct net_device *netdev = tp->netdev;
8456
8457         netif_device_detach(netdev);
8458
8459         if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
8460                 struct napi_struct *napi = &tp->napi;
8461
8462                 clear_bit(WORK_ENABLE, &tp->flags);
8463                 usb_kill_urb(tp->intr_urb);
8464                 tasklet_disable(&tp->tx_tl);
8465                 napi_disable(napi);
8466                 cancel_delayed_work_sync(&tp->schedule);
8467                 tp->rtl_ops.down(tp);
8468                 napi_enable(napi);
8469                 tasklet_enable(&tp->tx_tl);
8470         }
8471
8472         return 0;
8473 }
8474
8475 static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
8476 {
8477         struct r8152 *tp = usb_get_intfdata(intf);
8478         int ret;
8479
8480         mutex_lock(&tp->control);
8481
8482         if (PMSG_IS_AUTO(message))
8483                 ret = rtl8152_runtime_suspend(tp);
8484         else
8485                 ret = rtl8152_system_suspend(tp);
8486
8487         mutex_unlock(&tp->control);
8488
8489         return ret;
8490 }
8491
8492 static int rtl8152_resume(struct usb_interface *intf)
8493 {
8494         struct r8152 *tp = usb_get_intfdata(intf);
8495         int ret;
8496
8497         mutex_lock(&tp->control);
8498
8499         rtl_reset_ocp_base(tp);
8500
8501         if (test_bit(SELECTIVE_SUSPEND, &tp->flags))
8502                 ret = rtl8152_runtime_resume(tp);
8503         else
8504                 ret = rtl8152_system_resume(tp);
8505
8506         mutex_unlock(&tp->control);
8507
8508         return ret;
8509 }
8510
8511 static int rtl8152_reset_resume(struct usb_interface *intf)
8512 {
8513         struct r8152 *tp = usb_get_intfdata(intf);
8514
8515         clear_bit(SELECTIVE_SUSPEND, &tp->flags);
8516         rtl_reset_ocp_base(tp);
8517         tp->rtl_ops.init(tp);
8518         queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
8519         set_ethernet_addr(tp, true);
8520         return rtl8152_resume(intf);
8521 }
8522
8523 static void rtl8152_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
8524 {
8525         struct r8152 *tp = netdev_priv(dev);
8526
8527         if (usb_autopm_get_interface(tp->intf) < 0)
8528                 return;
8529
8530         if (!rtl_can_wakeup(tp)) {
8531                 wol->supported = 0;
8532                 wol->wolopts = 0;
8533         } else {
8534                 mutex_lock(&tp->control);
8535                 wol->supported = WAKE_ANY;
8536                 wol->wolopts = __rtl_get_wol(tp);
8537                 mutex_unlock(&tp->control);
8538         }
8539
8540         usb_autopm_put_interface(tp->intf);
8541 }
8542
8543 static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
8544 {
8545         struct r8152 *tp = netdev_priv(dev);
8546         int ret;
8547
8548         if (!rtl_can_wakeup(tp))
8549                 return -EOPNOTSUPP;
8550
8551         if (wol->wolopts & ~WAKE_ANY)
8552                 return -EINVAL;
8553
8554         ret = usb_autopm_get_interface(tp->intf);
8555         if (ret < 0)
8556                 goto out_set_wol;
8557
8558         mutex_lock(&tp->control);
8559
8560         __rtl_set_wol(tp, wol->wolopts);
8561         tp->saved_wolopts = wol->wolopts & WAKE_ANY;
8562
8563         mutex_unlock(&tp->control);
8564
8565         usb_autopm_put_interface(tp->intf);
8566
8567 out_set_wol:
8568         return ret;
8569 }
8570
8571 static u32 rtl8152_get_msglevel(struct net_device *dev)
8572 {
8573         struct r8152 *tp = netdev_priv(dev);
8574
8575         return tp->msg_enable;
8576 }
8577
8578 static void rtl8152_set_msglevel(struct net_device *dev, u32 value)
8579 {
8580         struct r8152 *tp = netdev_priv(dev);
8581
8582         tp->msg_enable = value;
8583 }
8584
8585 static void rtl8152_get_drvinfo(struct net_device *netdev,
8586                                 struct ethtool_drvinfo *info)
8587 {
8588         struct r8152 *tp = netdev_priv(netdev);
8589
8590         strscpy(info->driver, MODULENAME, sizeof(info->driver));
8591         strscpy(info->version, DRIVER_VERSION, sizeof(info->version));
8592         usb_make_path(tp->udev, info->bus_info, sizeof(info->bus_info));
8593         if (!IS_ERR_OR_NULL(tp->rtl_fw.fw))
8594                 strscpy(info->fw_version, tp->rtl_fw.version,
8595                         sizeof(info->fw_version));
8596 }
8597
8598 static
8599 int rtl8152_get_link_ksettings(struct net_device *netdev,
8600                                struct ethtool_link_ksettings *cmd)
8601 {
8602         struct r8152 *tp = netdev_priv(netdev);
8603         int ret;
8604
8605         if (!tp->mii.mdio_read)
8606                 return -EOPNOTSUPP;
8607
8608         ret = usb_autopm_get_interface(tp->intf);
8609         if (ret < 0)
8610                 goto out;
8611
8612         mutex_lock(&tp->control);
8613
8614         mii_ethtool_get_link_ksettings(&tp->mii, cmd);
8615
8616         linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
8617                          cmd->link_modes.supported, tp->support_2500full);
8618
8619         if (tp->support_2500full) {
8620                 linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
8621                                  cmd->link_modes.advertising,
8622                                  ocp_reg_read(tp, OCP_10GBT_CTRL) & MDIO_AN_10GBT_CTRL_ADV2_5G);
8623
8624                 linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
8625                                  cmd->link_modes.lp_advertising,
8626                                  ocp_reg_read(tp, OCP_10GBT_STAT) & MDIO_AN_10GBT_STAT_LP2_5G);
8627
8628                 if (is_speed_2500(rtl8152_get_speed(tp)))
8629                         cmd->base.speed = SPEED_2500;
8630         }
8631
8632         mutex_unlock(&tp->control);
8633
8634         usb_autopm_put_interface(tp->intf);
8635
8636 out:
8637         return ret;
8638 }
8639
8640 static int rtl8152_set_link_ksettings(struct net_device *dev,
8641                                       const struct ethtool_link_ksettings *cmd)
8642 {
8643         struct r8152 *tp = netdev_priv(dev);
8644         u32 advertising = 0;
8645         int ret;
8646
8647         ret = usb_autopm_get_interface(tp->intf);
8648         if (ret < 0)
8649                 goto out;
8650
8651         if (test_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
8652                      cmd->link_modes.advertising))
8653                 advertising |= RTL_ADVERTISED_10_HALF;
8654
8655         if (test_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
8656                      cmd->link_modes.advertising))
8657                 advertising |= RTL_ADVERTISED_10_FULL;
8658
8659         if (test_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
8660                      cmd->link_modes.advertising))
8661                 advertising |= RTL_ADVERTISED_100_HALF;
8662
8663         if (test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
8664                      cmd->link_modes.advertising))
8665                 advertising |= RTL_ADVERTISED_100_FULL;
8666
8667         if (test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
8668                      cmd->link_modes.advertising))
8669                 advertising |= RTL_ADVERTISED_1000_HALF;
8670
8671         if (test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
8672                      cmd->link_modes.advertising))
8673                 advertising |= RTL_ADVERTISED_1000_FULL;
8674
8675         if (test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
8676                      cmd->link_modes.advertising))
8677                 advertising |= RTL_ADVERTISED_2500_FULL;
8678
8679         mutex_lock(&tp->control);
8680
8681         ret = rtl8152_set_speed(tp, cmd->base.autoneg, cmd->base.speed,
8682                                 cmd->base.duplex, advertising);
8683         if (!ret) {
8684                 tp->autoneg = cmd->base.autoneg;
8685                 tp->speed = cmd->base.speed;
8686                 tp->duplex = cmd->base.duplex;
8687                 tp->advertising = advertising;
8688         }
8689
8690         mutex_unlock(&tp->control);
8691
8692         usb_autopm_put_interface(tp->intf);
8693
8694 out:
8695         return ret;
8696 }
8697
8698 static const char rtl8152_gstrings[][ETH_GSTRING_LEN] = {
8699         "tx_packets",
8700         "rx_packets",
8701         "tx_errors",
8702         "rx_errors",
8703         "rx_missed",
8704         "align_errors",
8705         "tx_single_collisions",
8706         "tx_multi_collisions",
8707         "rx_unicast",
8708         "rx_broadcast",
8709         "rx_multicast",
8710         "tx_aborted",
8711         "tx_underrun",
8712 };
8713
8714 static int rtl8152_get_sset_count(struct net_device *dev, int sset)
8715 {
8716         switch (sset) {
8717         case ETH_SS_STATS:
8718                 return ARRAY_SIZE(rtl8152_gstrings);
8719         default:
8720                 return -EOPNOTSUPP;
8721         }
8722 }
8723
8724 static void rtl8152_get_ethtool_stats(struct net_device *dev,
8725                                       struct ethtool_stats *stats, u64 *data)
8726 {
8727         struct r8152 *tp = netdev_priv(dev);
8728         struct tally_counter tally;
8729
8730         if (usb_autopm_get_interface(tp->intf) < 0)
8731                 return;
8732
8733         generic_ocp_read(tp, PLA_TALLYCNT, sizeof(tally), &tally, MCU_TYPE_PLA);
8734
8735         usb_autopm_put_interface(tp->intf);
8736
8737         data[0] = le64_to_cpu(tally.tx_packets);
8738         data[1] = le64_to_cpu(tally.rx_packets);
8739         data[2] = le64_to_cpu(tally.tx_errors);
8740         data[3] = le32_to_cpu(tally.rx_errors);
8741         data[4] = le16_to_cpu(tally.rx_missed);
8742         data[5] = le16_to_cpu(tally.align_errors);
8743         data[6] = le32_to_cpu(tally.tx_one_collision);
8744         data[7] = le32_to_cpu(tally.tx_multi_collision);
8745         data[8] = le64_to_cpu(tally.rx_unicast);
8746         data[9] = le64_to_cpu(tally.rx_broadcast);
8747         data[10] = le32_to_cpu(tally.rx_multicast);
8748         data[11] = le16_to_cpu(tally.tx_aborted);
8749         data[12] = le16_to_cpu(tally.tx_underrun);
8750 }
8751
8752 static void rtl8152_get_strings(struct net_device *dev, u32 stringset, u8 *data)
8753 {
8754         switch (stringset) {
8755         case ETH_SS_STATS:
8756                 memcpy(data, rtl8152_gstrings, sizeof(rtl8152_gstrings));
8757                 break;
8758         }
8759 }
8760
8761 static int r8152_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
8762 {
8763         u32 lp, adv, supported = 0;
8764         u16 val;
8765
8766         val = r8152_mmd_read(tp, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
8767         supported = mmd_eee_cap_to_ethtool_sup_t(val);
8768
8769         val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
8770         adv = mmd_eee_adv_to_ethtool_adv_t(val);
8771
8772         val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
8773         lp = mmd_eee_adv_to_ethtool_adv_t(val);
8774
8775         eee->eee_enabled = tp->eee_en;
8776         eee->eee_active = !!(supported & adv & lp);
8777         eee->supported = supported;
8778         eee->advertised = tp->eee_adv;
8779         eee->lp_advertised = lp;
8780
8781         return 0;
8782 }
8783
8784 static int r8152_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
8785 {
8786         u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
8787
8788         tp->eee_en = eee->eee_enabled;
8789         tp->eee_adv = val;
8790
8791         rtl_eee_enable(tp, tp->eee_en);
8792
8793         return 0;
8794 }
8795
8796 static int r8153_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
8797 {
8798         u32 lp, adv, supported = 0;
8799         u16 val;
8800
8801         val = ocp_reg_read(tp, OCP_EEE_ABLE);
8802         supported = mmd_eee_cap_to_ethtool_sup_t(val);
8803
8804         val = ocp_reg_read(tp, OCP_EEE_ADV);
8805         adv = mmd_eee_adv_to_ethtool_adv_t(val);
8806
8807         val = ocp_reg_read(tp, OCP_EEE_LPABLE);
8808         lp = mmd_eee_adv_to_ethtool_adv_t(val);
8809
8810         eee->eee_enabled = tp->eee_en;
8811         eee->eee_active = !!(supported & adv & lp);
8812         eee->supported = supported;
8813         eee->advertised = tp->eee_adv;
8814         eee->lp_advertised = lp;
8815
8816         return 0;
8817 }
8818
8819 static int
8820 rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata)
8821 {
8822         struct r8152 *tp = netdev_priv(net);
8823         int ret;
8824
8825         if (!tp->rtl_ops.eee_get) {
8826                 ret = -EOPNOTSUPP;
8827                 goto out;
8828         }
8829
8830         ret = usb_autopm_get_interface(tp->intf);
8831         if (ret < 0)
8832                 goto out;
8833
8834         mutex_lock(&tp->control);
8835
8836         ret = tp->rtl_ops.eee_get(tp, edata);
8837
8838         mutex_unlock(&tp->control);
8839
8840         usb_autopm_put_interface(tp->intf);
8841
8842 out:
8843         return ret;
8844 }
8845
8846 static int
8847 rtl_ethtool_set_eee(struct net_device *net, struct ethtool_eee *edata)
8848 {
8849         struct r8152 *tp = netdev_priv(net);
8850         int ret;
8851
8852         if (!tp->rtl_ops.eee_set) {
8853                 ret = -EOPNOTSUPP;
8854                 goto out;
8855         }
8856
8857         ret = usb_autopm_get_interface(tp->intf);
8858         if (ret < 0)
8859                 goto out;
8860
8861         mutex_lock(&tp->control);
8862
8863         ret = tp->rtl_ops.eee_set(tp, edata);
8864         if (!ret)
8865                 ret = mii_nway_restart(&tp->mii);
8866
8867         mutex_unlock(&tp->control);
8868
8869         usb_autopm_put_interface(tp->intf);
8870
8871 out:
8872         return ret;
8873 }
8874
8875 static int rtl8152_nway_reset(struct net_device *dev)
8876 {
8877         struct r8152 *tp = netdev_priv(dev);
8878         int ret;
8879
8880         ret = usb_autopm_get_interface(tp->intf);
8881         if (ret < 0)
8882                 goto out;
8883
8884         mutex_lock(&tp->control);
8885
8886         ret = mii_nway_restart(&tp->mii);
8887
8888         mutex_unlock(&tp->control);
8889
8890         usb_autopm_put_interface(tp->intf);
8891
8892 out:
8893         return ret;
8894 }
8895
8896 static int rtl8152_get_coalesce(struct net_device *netdev,
8897                                 struct ethtool_coalesce *coalesce,
8898                                 struct kernel_ethtool_coalesce *kernel_coal,
8899                                 struct netlink_ext_ack *extack)
8900 {
8901         struct r8152 *tp = netdev_priv(netdev);
8902
8903         switch (tp->version) {
8904         case RTL_VER_01:
8905         case RTL_VER_02:
8906         case RTL_VER_07:
8907                 return -EOPNOTSUPP;
8908         default:
8909                 break;
8910         }
8911
8912         coalesce->rx_coalesce_usecs = tp->coalesce;
8913
8914         return 0;
8915 }
8916
8917 static int rtl8152_set_coalesce(struct net_device *netdev,
8918                                 struct ethtool_coalesce *coalesce,
8919                                 struct kernel_ethtool_coalesce *kernel_coal,
8920                                 struct netlink_ext_ack *extack)
8921 {
8922         struct r8152 *tp = netdev_priv(netdev);
8923         int ret;
8924
8925         switch (tp->version) {
8926         case RTL_VER_01:
8927         case RTL_VER_02:
8928         case RTL_VER_07:
8929                 return -EOPNOTSUPP;
8930         default:
8931                 break;
8932         }
8933
8934         if (coalesce->rx_coalesce_usecs > COALESCE_SLOW)
8935                 return -EINVAL;
8936
8937         ret = usb_autopm_get_interface(tp->intf);
8938         if (ret < 0)
8939                 return ret;
8940
8941         mutex_lock(&tp->control);
8942
8943         if (tp->coalesce != coalesce->rx_coalesce_usecs) {
8944                 tp->coalesce = coalesce->rx_coalesce_usecs;
8945
8946                 if (netif_running(netdev) && netif_carrier_ok(netdev)) {
8947                         netif_stop_queue(netdev);
8948                         napi_disable(&tp->napi);
8949                         tp->rtl_ops.disable(tp);
8950                         tp->rtl_ops.enable(tp);
8951                         rtl_start_rx(tp);
8952                         clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
8953                         _rtl8152_set_rx_mode(netdev);
8954                         napi_enable(&tp->napi);
8955                         netif_wake_queue(netdev);
8956                 }
8957         }
8958
8959         mutex_unlock(&tp->control);
8960
8961         usb_autopm_put_interface(tp->intf);
8962
8963         return ret;
8964 }
8965
8966 static int rtl8152_get_tunable(struct net_device *netdev,
8967                                const struct ethtool_tunable *tunable, void *d)
8968 {
8969         struct r8152 *tp = netdev_priv(netdev);
8970
8971         switch (tunable->id) {
8972         case ETHTOOL_RX_COPYBREAK:
8973                 *(u32 *)d = tp->rx_copybreak;
8974                 break;
8975         default:
8976                 return -EOPNOTSUPP;
8977         }
8978
8979         return 0;
8980 }
8981
8982 static int rtl8152_set_tunable(struct net_device *netdev,
8983                                const struct ethtool_tunable *tunable,
8984                                const void *d)
8985 {
8986         struct r8152 *tp = netdev_priv(netdev);
8987         u32 val;
8988
8989         switch (tunable->id) {
8990         case ETHTOOL_RX_COPYBREAK:
8991                 val = *(u32 *)d;
8992                 if (val < ETH_ZLEN) {
8993                         netif_err(tp, rx_err, netdev,
8994                                   "Invalid rx copy break value\n");
8995                         return -EINVAL;
8996                 }
8997
8998                 if (tp->rx_copybreak != val) {
8999                         if (netdev->flags & IFF_UP) {
9000                                 mutex_lock(&tp->control);
9001                                 napi_disable(&tp->napi);
9002                                 tp->rx_copybreak = val;
9003                                 napi_enable(&tp->napi);
9004                                 mutex_unlock(&tp->control);
9005                         } else {
9006                                 tp->rx_copybreak = val;
9007                         }
9008                 }
9009                 break;
9010         default:
9011                 return -EOPNOTSUPP;
9012         }
9013
9014         return 0;
9015 }
9016
9017 static void rtl8152_get_ringparam(struct net_device *netdev,
9018                                   struct ethtool_ringparam *ring,
9019                                   struct kernel_ethtool_ringparam *kernel_ring,
9020                                   struct netlink_ext_ack *extack)
9021 {
9022         struct r8152 *tp = netdev_priv(netdev);
9023
9024         ring->rx_max_pending = RTL8152_RX_MAX_PENDING;
9025         ring->rx_pending = tp->rx_pending;
9026 }
9027
9028 static int rtl8152_set_ringparam(struct net_device *netdev,
9029                                  struct ethtool_ringparam *ring,
9030                                  struct kernel_ethtool_ringparam *kernel_ring,
9031                                  struct netlink_ext_ack *extack)
9032 {
9033         struct r8152 *tp = netdev_priv(netdev);
9034
9035         if (ring->rx_pending < (RTL8152_MAX_RX * 2))
9036                 return -EINVAL;
9037
9038         if (tp->rx_pending != ring->rx_pending) {
9039                 if (netdev->flags & IFF_UP) {
9040                         mutex_lock(&tp->control);
9041                         napi_disable(&tp->napi);
9042                         tp->rx_pending = ring->rx_pending;
9043                         napi_enable(&tp->napi);
9044                         mutex_unlock(&tp->control);
9045                 } else {
9046                         tp->rx_pending = ring->rx_pending;
9047                 }
9048         }
9049
9050         return 0;
9051 }
9052
9053 static void rtl8152_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
9054 {
9055         struct r8152 *tp = netdev_priv(netdev);
9056         u16 bmcr, lcladv, rmtadv;
9057         u8 cap;
9058
9059         if (usb_autopm_get_interface(tp->intf) < 0)
9060                 return;
9061
9062         mutex_lock(&tp->control);
9063
9064         bmcr = r8152_mdio_read(tp, MII_BMCR);
9065         lcladv = r8152_mdio_read(tp, MII_ADVERTISE);
9066         rmtadv = r8152_mdio_read(tp, MII_LPA);
9067
9068         mutex_unlock(&tp->control);
9069
9070         usb_autopm_put_interface(tp->intf);
9071
9072         if (!(bmcr & BMCR_ANENABLE)) {
9073                 pause->autoneg = 0;
9074                 pause->rx_pause = 0;
9075                 pause->tx_pause = 0;
9076                 return;
9077         }
9078
9079         pause->autoneg = 1;
9080
9081         cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
9082
9083         if (cap & FLOW_CTRL_RX)
9084                 pause->rx_pause = 1;
9085
9086         if (cap & FLOW_CTRL_TX)
9087                 pause->tx_pause = 1;
9088 }
9089
9090 static int rtl8152_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
9091 {
9092         struct r8152 *tp = netdev_priv(netdev);
9093         u16 old, new1;
9094         u8 cap = 0;
9095         int ret;
9096
9097         ret = usb_autopm_get_interface(tp->intf);
9098         if (ret < 0)
9099                 return ret;
9100
9101         mutex_lock(&tp->control);
9102
9103         if (pause->autoneg && !(r8152_mdio_read(tp, MII_BMCR) & BMCR_ANENABLE)) {
9104                 ret = -EINVAL;
9105                 goto out;
9106         }
9107
9108         if (pause->rx_pause)
9109                 cap |= FLOW_CTRL_RX;
9110
9111         if (pause->tx_pause)
9112                 cap |= FLOW_CTRL_TX;
9113
9114         old = r8152_mdio_read(tp, MII_ADVERTISE);
9115         new1 = (old & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) | mii_advertise_flowctrl(cap);
9116         if (old != new1)
9117                 r8152_mdio_write(tp, MII_ADVERTISE, new1);
9118
9119 out:
9120         mutex_unlock(&tp->control);
9121         usb_autopm_put_interface(tp->intf);
9122
9123         return ret;
9124 }
9125
9126 static const struct ethtool_ops ops = {
9127         .supported_coalesce_params = ETHTOOL_COALESCE_USECS,
9128         .get_drvinfo = rtl8152_get_drvinfo,
9129         .get_link = ethtool_op_get_link,
9130         .nway_reset = rtl8152_nway_reset,
9131         .get_msglevel = rtl8152_get_msglevel,
9132         .set_msglevel = rtl8152_set_msglevel,
9133         .get_wol = rtl8152_get_wol,
9134         .set_wol = rtl8152_set_wol,
9135         .get_strings = rtl8152_get_strings,
9136         .get_sset_count = rtl8152_get_sset_count,
9137         .get_ethtool_stats = rtl8152_get_ethtool_stats,
9138         .get_coalesce = rtl8152_get_coalesce,
9139         .set_coalesce = rtl8152_set_coalesce,
9140         .get_eee = rtl_ethtool_get_eee,
9141         .set_eee = rtl_ethtool_set_eee,
9142         .get_link_ksettings = rtl8152_get_link_ksettings,
9143         .set_link_ksettings = rtl8152_set_link_ksettings,
9144         .get_tunable = rtl8152_get_tunable,
9145         .set_tunable = rtl8152_set_tunable,
9146         .get_ringparam = rtl8152_get_ringparam,
9147         .set_ringparam = rtl8152_set_ringparam,
9148         .get_pauseparam = rtl8152_get_pauseparam,
9149         .set_pauseparam = rtl8152_set_pauseparam,
9150 };
9151
9152 static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
9153 {
9154         struct r8152 *tp = netdev_priv(netdev);
9155         struct mii_ioctl_data *data = if_mii(rq);
9156         int res;
9157
9158         if (test_bit(RTL8152_UNPLUG, &tp->flags))
9159                 return -ENODEV;
9160
9161         res = usb_autopm_get_interface(tp->intf);
9162         if (res < 0)
9163                 goto out;
9164
9165         switch (cmd) {
9166         case SIOCGMIIPHY:
9167                 data->phy_id = R8152_PHY_ID; /* Internal PHY */
9168                 break;
9169
9170         case SIOCGMIIREG:
9171                 mutex_lock(&tp->control);
9172                 data->val_out = r8152_mdio_read(tp, data->reg_num);
9173                 mutex_unlock(&tp->control);
9174                 break;
9175
9176         case SIOCSMIIREG:
9177                 if (!capable(CAP_NET_ADMIN)) {
9178                         res = -EPERM;
9179                         break;
9180                 }
9181                 mutex_lock(&tp->control);
9182                 r8152_mdio_write(tp, data->reg_num, data->val_in);
9183                 mutex_unlock(&tp->control);
9184                 break;
9185
9186         default:
9187                 res = -EOPNOTSUPP;
9188         }
9189
9190         usb_autopm_put_interface(tp->intf);
9191
9192 out:
9193         return res;
9194 }
9195
9196 static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
9197 {
9198         struct r8152 *tp = netdev_priv(dev);
9199         int ret;
9200
9201         switch (tp->version) {
9202         case RTL_VER_01:
9203         case RTL_VER_02:
9204         case RTL_VER_07:
9205                 dev->mtu = new_mtu;
9206                 return 0;
9207         default:
9208                 break;
9209         }
9210
9211         ret = usb_autopm_get_interface(tp->intf);
9212         if (ret < 0)
9213                 return ret;
9214
9215         mutex_lock(&tp->control);
9216
9217         dev->mtu = new_mtu;
9218
9219         if (netif_running(dev)) {
9220                 if (tp->rtl_ops.change_mtu)
9221                         tp->rtl_ops.change_mtu(tp);
9222
9223                 if (netif_carrier_ok(dev)) {
9224                         netif_stop_queue(dev);
9225                         napi_disable(&tp->napi);
9226                         tasklet_disable(&tp->tx_tl);
9227                         tp->rtl_ops.disable(tp);
9228                         tp->rtl_ops.enable(tp);
9229                         rtl_start_rx(tp);
9230                         tasklet_enable(&tp->tx_tl);
9231                         napi_enable(&tp->napi);
9232                         rtl8152_set_rx_mode(dev);
9233                         netif_wake_queue(dev);
9234                 }
9235         }
9236
9237         mutex_unlock(&tp->control);
9238
9239         usb_autopm_put_interface(tp->intf);
9240
9241         return ret;
9242 }
9243
9244 static const struct net_device_ops rtl8152_netdev_ops = {
9245         .ndo_open               = rtl8152_open,
9246         .ndo_stop               = rtl8152_close,
9247         .ndo_eth_ioctl          = rtl8152_ioctl,
9248         .ndo_start_xmit         = rtl8152_start_xmit,
9249         .ndo_tx_timeout         = rtl8152_tx_timeout,
9250         .ndo_set_features       = rtl8152_set_features,
9251         .ndo_set_rx_mode        = rtl8152_set_rx_mode,
9252         .ndo_set_mac_address    = rtl8152_set_mac_address,
9253         .ndo_change_mtu         = rtl8152_change_mtu,
9254         .ndo_validate_addr      = eth_validate_addr,
9255         .ndo_features_check     = rtl8152_features_check,
9256 };
9257
9258 static void rtl8152_unload(struct r8152 *tp)
9259 {
9260         if (test_bit(RTL8152_UNPLUG, &tp->flags))
9261                 return;
9262
9263         if (tp->version != RTL_VER_01)
9264                 r8152_power_cut_en(tp, true);
9265 }
9266
9267 static void rtl8153_unload(struct r8152 *tp)
9268 {
9269         if (test_bit(RTL8152_UNPLUG, &tp->flags))
9270                 return;
9271
9272         r8153_power_cut_en(tp, false);
9273 }
9274
9275 static void rtl8153b_unload(struct r8152 *tp)
9276 {
9277         if (test_bit(RTL8152_UNPLUG, &tp->flags))
9278                 return;
9279
9280         r8153b_power_cut_en(tp, false);
9281 }
9282
9283 static int rtl_ops_init(struct r8152 *tp)
9284 {
9285         struct rtl_ops *ops = &tp->rtl_ops;
9286         int ret = 0;
9287
9288         switch (tp->version) {
9289         case RTL_VER_01:
9290         case RTL_VER_02:
9291         case RTL_VER_07:
9292                 ops->init               = r8152b_init;
9293                 ops->enable             = rtl8152_enable;
9294                 ops->disable            = rtl8152_disable;
9295                 ops->up                 = rtl8152_up;
9296                 ops->down               = rtl8152_down;
9297                 ops->unload             = rtl8152_unload;
9298                 ops->eee_get            = r8152_get_eee;
9299                 ops->eee_set            = r8152_set_eee;
9300                 ops->in_nway            = rtl8152_in_nway;
9301                 ops->hw_phy_cfg         = r8152b_hw_phy_cfg;
9302                 ops->autosuspend_en     = rtl_runtime_suspend_enable;
9303                 tp->rx_buf_sz           = 16 * 1024;
9304                 tp->eee_en              = true;
9305                 tp->eee_adv             = MDIO_EEE_100TX;
9306                 break;
9307
9308         case RTL_VER_03:
9309         case RTL_VER_04:
9310         case RTL_VER_05:
9311         case RTL_VER_06:
9312                 ops->init               = r8153_init;
9313                 ops->enable             = rtl8153_enable;
9314                 ops->disable            = rtl8153_disable;
9315                 ops->up                 = rtl8153_up;
9316                 ops->down               = rtl8153_down;
9317                 ops->unload             = rtl8153_unload;
9318                 ops->eee_get            = r8153_get_eee;
9319                 ops->eee_set            = r8152_set_eee;
9320                 ops->in_nway            = rtl8153_in_nway;
9321                 ops->hw_phy_cfg         = r8153_hw_phy_cfg;
9322                 ops->autosuspend_en     = rtl8153_runtime_enable;
9323                 ops->change_mtu         = rtl8153_change_mtu;
9324                 if (tp->udev->speed < USB_SPEED_SUPER)
9325                         tp->rx_buf_sz   = 16 * 1024;
9326                 else
9327                         tp->rx_buf_sz   = 32 * 1024;
9328                 tp->eee_en              = true;
9329                 tp->eee_adv             = MDIO_EEE_1000T | MDIO_EEE_100TX;
9330                 break;
9331
9332         case RTL_VER_08:
9333         case RTL_VER_09:
9334                 ops->init               = r8153b_init;
9335                 ops->enable             = rtl8153_enable;
9336                 ops->disable            = rtl8153_disable;
9337                 ops->up                 = rtl8153b_up;
9338                 ops->down               = rtl8153b_down;
9339                 ops->unload             = rtl8153b_unload;
9340                 ops->eee_get            = r8153_get_eee;
9341                 ops->eee_set            = r8152_set_eee;
9342                 ops->in_nway            = rtl8153_in_nway;
9343                 ops->hw_phy_cfg         = r8153b_hw_phy_cfg;
9344                 ops->autosuspend_en     = rtl8153b_runtime_enable;
9345                 ops->change_mtu         = rtl8153_change_mtu;
9346                 tp->rx_buf_sz           = 32 * 1024;
9347                 tp->eee_en              = true;
9348                 tp->eee_adv             = MDIO_EEE_1000T | MDIO_EEE_100TX;
9349                 break;
9350
9351         case RTL_VER_11:
9352                 tp->eee_en              = true;
9353                 tp->eee_adv             = MDIO_EEE_1000T | MDIO_EEE_100TX;
9354                 fallthrough;
9355         case RTL_VER_10:
9356                 ops->init               = r8156_init;
9357                 ops->enable             = rtl8156_enable;
9358                 ops->disable            = rtl8156_disable;
9359                 ops->up                 = rtl8156_up;
9360                 ops->down               = rtl8156_down;
9361                 ops->unload             = rtl8153_unload;
9362                 ops->eee_get            = r8153_get_eee;
9363                 ops->eee_set            = r8152_set_eee;
9364                 ops->in_nway            = rtl8153_in_nway;
9365                 ops->hw_phy_cfg         = r8156_hw_phy_cfg;
9366                 ops->autosuspend_en     = rtl8156_runtime_enable;
9367                 ops->change_mtu         = rtl8156_change_mtu;
9368                 tp->rx_buf_sz           = 48 * 1024;
9369                 tp->support_2500full    = 1;
9370                 break;
9371
9372         case RTL_VER_12:
9373         case RTL_VER_13:
9374                 tp->support_2500full    = 1;
9375                 fallthrough;
9376         case RTL_VER_15:
9377                 tp->eee_en              = true;
9378                 tp->eee_adv             = MDIO_EEE_1000T | MDIO_EEE_100TX;
9379                 ops->init               = r8156b_init;
9380                 ops->enable             = rtl8156b_enable;
9381                 ops->disable            = rtl8153_disable;
9382                 ops->up                 = rtl8156_up;
9383                 ops->down               = rtl8156_down;
9384                 ops->unload             = rtl8153_unload;
9385                 ops->eee_get            = r8153_get_eee;
9386                 ops->eee_set            = r8152_set_eee;
9387                 ops->in_nway            = rtl8153_in_nway;
9388                 ops->hw_phy_cfg         = r8156b_hw_phy_cfg;
9389                 ops->autosuspend_en     = rtl8156_runtime_enable;
9390                 ops->change_mtu         = rtl8156_change_mtu;
9391                 tp->rx_buf_sz           = 48 * 1024;
9392                 break;
9393
9394         case RTL_VER_14:
9395                 ops->init               = r8153c_init;
9396                 ops->enable             = rtl8153_enable;
9397                 ops->disable            = rtl8153_disable;
9398                 ops->up                 = rtl8153c_up;
9399                 ops->down               = rtl8153b_down;
9400                 ops->unload             = rtl8153_unload;
9401                 ops->eee_get            = r8153_get_eee;
9402                 ops->eee_set            = r8152_set_eee;
9403                 ops->in_nway            = rtl8153_in_nway;
9404                 ops->hw_phy_cfg         = r8153c_hw_phy_cfg;
9405                 ops->autosuspend_en     = rtl8153c_runtime_enable;
9406                 ops->change_mtu         = rtl8153c_change_mtu;
9407                 tp->rx_buf_sz           = 32 * 1024;
9408                 tp->eee_en              = true;
9409                 tp->eee_adv             = MDIO_EEE_1000T | MDIO_EEE_100TX;
9410                 break;
9411
9412         default:
9413                 ret = -ENODEV;
9414                 dev_err(&tp->intf->dev, "Unknown Device\n");
9415                 break;
9416         }
9417
9418         return ret;
9419 }
9420
9421 #define FIRMWARE_8153A_2        "rtl_nic/rtl8153a-2.fw"
9422 #define FIRMWARE_8153A_3        "rtl_nic/rtl8153a-3.fw"
9423 #define FIRMWARE_8153A_4        "rtl_nic/rtl8153a-4.fw"
9424 #define FIRMWARE_8153B_2        "rtl_nic/rtl8153b-2.fw"
9425 #define FIRMWARE_8153C_1        "rtl_nic/rtl8153c-1.fw"
9426 #define FIRMWARE_8156A_2        "rtl_nic/rtl8156a-2.fw"
9427 #define FIRMWARE_8156B_2        "rtl_nic/rtl8156b-2.fw"
9428
9429 MODULE_FIRMWARE(FIRMWARE_8153A_2);
9430 MODULE_FIRMWARE(FIRMWARE_8153A_3);
9431 MODULE_FIRMWARE(FIRMWARE_8153A_4);
9432 MODULE_FIRMWARE(FIRMWARE_8153B_2);
9433 MODULE_FIRMWARE(FIRMWARE_8153C_1);
9434 MODULE_FIRMWARE(FIRMWARE_8156A_2);
9435 MODULE_FIRMWARE(FIRMWARE_8156B_2);
9436
9437 static int rtl_fw_init(struct r8152 *tp)
9438 {
9439         struct rtl_fw *rtl_fw = &tp->rtl_fw;
9440
9441         switch (tp->version) {
9442         case RTL_VER_04:
9443                 rtl_fw->fw_name         = FIRMWARE_8153A_2;
9444                 rtl_fw->pre_fw          = r8153_pre_firmware_1;
9445                 rtl_fw->post_fw         = r8153_post_firmware_1;
9446                 break;
9447         case RTL_VER_05:
9448                 rtl_fw->fw_name         = FIRMWARE_8153A_3;
9449                 rtl_fw->pre_fw          = r8153_pre_firmware_2;
9450                 rtl_fw->post_fw         = r8153_post_firmware_2;
9451                 break;
9452         case RTL_VER_06:
9453                 rtl_fw->fw_name         = FIRMWARE_8153A_4;
9454                 rtl_fw->post_fw         = r8153_post_firmware_3;
9455                 break;
9456         case RTL_VER_09:
9457                 rtl_fw->fw_name         = FIRMWARE_8153B_2;
9458                 rtl_fw->pre_fw          = r8153b_pre_firmware_1;
9459                 rtl_fw->post_fw         = r8153b_post_firmware_1;
9460                 break;
9461         case RTL_VER_11:
9462                 rtl_fw->fw_name         = FIRMWARE_8156A_2;
9463                 rtl_fw->post_fw         = r8156a_post_firmware_1;
9464                 break;
9465         case RTL_VER_13:
9466         case RTL_VER_15:
9467                 rtl_fw->fw_name         = FIRMWARE_8156B_2;
9468                 break;
9469         case RTL_VER_14:
9470                 rtl_fw->fw_name         = FIRMWARE_8153C_1;
9471                 rtl_fw->pre_fw          = r8153b_pre_firmware_1;
9472                 rtl_fw->post_fw         = r8153c_post_firmware_1;
9473                 break;
9474         default:
9475                 break;
9476         }
9477
9478         return 0;
9479 }
9480
9481 static u8 __rtl_get_hw_ver(struct usb_device *udev)
9482 {
9483         u32 ocp_data = 0;
9484         __le32 *tmp;
9485         u8 version;
9486         int ret;
9487
9488         tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
9489         if (!tmp)
9490                 return 0;
9491
9492         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
9493                               RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
9494                               PLA_TCR0, MCU_TYPE_PLA, tmp, sizeof(*tmp), 500);
9495         if (ret > 0)
9496                 ocp_data = (__le32_to_cpu(*tmp) >> 16) & VERSION_MASK;
9497
9498         kfree(tmp);
9499
9500         switch (ocp_data) {
9501         case 0x4c00:
9502                 version = RTL_VER_01;
9503                 break;
9504         case 0x4c10:
9505                 version = RTL_VER_02;
9506                 break;
9507         case 0x5c00:
9508                 version = RTL_VER_03;
9509                 break;
9510         case 0x5c10:
9511                 version = RTL_VER_04;
9512                 break;
9513         case 0x5c20:
9514                 version = RTL_VER_05;
9515                 break;
9516         case 0x5c30:
9517                 version = RTL_VER_06;
9518                 break;
9519         case 0x4800:
9520                 version = RTL_VER_07;
9521                 break;
9522         case 0x6000:
9523                 version = RTL_VER_08;
9524                 break;
9525         case 0x6010:
9526                 version = RTL_VER_09;
9527                 break;
9528         case 0x7010:
9529                 version = RTL_TEST_01;
9530                 break;
9531         case 0x7020:
9532                 version = RTL_VER_10;
9533                 break;
9534         case 0x7030:
9535                 version = RTL_VER_11;
9536                 break;
9537         case 0x7400:
9538                 version = RTL_VER_12;
9539                 break;
9540         case 0x7410:
9541                 version = RTL_VER_13;
9542                 break;
9543         case 0x6400:
9544                 version = RTL_VER_14;
9545                 break;
9546         case 0x7420:
9547                 version = RTL_VER_15;
9548                 break;
9549         default:
9550                 version = RTL_VER_UNKNOWN;
9551                 dev_info(&udev->dev, "Unknown version 0x%04x\n", ocp_data);
9552                 break;
9553         }
9554
9555         return version;
9556 }
9557
9558 u8 rtl8152_get_version(struct usb_interface *intf)
9559 {
9560         u8 version;
9561
9562         version = __rtl_get_hw_ver(interface_to_usbdev(intf));
9563
9564         dev_dbg(&intf->dev, "Detected version 0x%04x\n", version);
9565
9566         return version;
9567 }
9568 EXPORT_SYMBOL_GPL(rtl8152_get_version);
9569
9570 static bool rtl8152_supports_lenovo_macpassthru(struct usb_device *udev)
9571 {
9572         int parent_vendor_id = le16_to_cpu(udev->parent->descriptor.idVendor);
9573         int product_id = le16_to_cpu(udev->descriptor.idProduct);
9574         int vendor_id = le16_to_cpu(udev->descriptor.idVendor);
9575
9576         if (vendor_id == VENDOR_ID_LENOVO) {
9577                 switch (product_id) {
9578                 case DEVICE_ID_LENOVO_USB_C_TRAVEL_HUB:
9579                 case DEVICE_ID_THINKPAD_ONELINK_PLUS_DOCK:
9580                 case DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2:
9581                 case DEVICE_ID_THINKPAD_USB_C_DOCK_GEN2:
9582                 case DEVICE_ID_THINKPAD_USB_C_DOCK_GEN3:
9583                 case DEVICE_ID_THINKPAD_USB_C_DONGLE:
9584                         return 1;
9585                 }
9586         } else if (vendor_id == VENDOR_ID_REALTEK && parent_vendor_id == VENDOR_ID_LENOVO) {
9587                 switch (product_id) {
9588                 case 0x8153:
9589                         return 1;
9590                 }
9591         }
9592         return 0;
9593 }
9594
9595 static int rtl8152_probe(struct usb_interface *intf,
9596                          const struct usb_device_id *id)
9597 {
9598         struct usb_device *udev = interface_to_usbdev(intf);
9599         struct r8152 *tp;
9600         struct net_device *netdev;
9601         u8 version;
9602         int ret;
9603
9604         if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
9605                 return -ENODEV;
9606
9607         if (!rtl_check_vendor_ok(intf))
9608                 return -ENODEV;
9609
9610         version = rtl8152_get_version(intf);
9611         if (version == RTL_VER_UNKNOWN)
9612                 return -ENODEV;
9613
9614         usb_reset_device(udev);
9615         netdev = alloc_etherdev(sizeof(struct r8152));
9616         if (!netdev) {
9617                 dev_err(&intf->dev, "Out of memory\n");
9618                 return -ENOMEM;
9619         }
9620
9621         SET_NETDEV_DEV(netdev, &intf->dev);
9622         tp = netdev_priv(netdev);
9623         tp->msg_enable = 0x7FFF;
9624
9625         tp->udev = udev;
9626         tp->netdev = netdev;
9627         tp->intf = intf;
9628         tp->version = version;
9629
9630         tp->pipe_ctrl_in = usb_rcvctrlpipe(udev, 0);
9631         tp->pipe_ctrl_out = usb_sndctrlpipe(udev, 0);
9632         tp->pipe_in = usb_rcvbulkpipe(udev, 1);
9633         tp->pipe_out = usb_sndbulkpipe(udev, 2);
9634         tp->pipe_intr = usb_rcvintpipe(udev, 3);
9635
9636         switch (version) {
9637         case RTL_VER_01:
9638         case RTL_VER_02:
9639         case RTL_VER_07:
9640                 tp->mii.supports_gmii = 0;
9641                 break;
9642         default:
9643                 tp->mii.supports_gmii = 1;
9644                 break;
9645         }
9646
9647         ret = rtl_ops_init(tp);
9648         if (ret)
9649                 goto out;
9650
9651         rtl_fw_init(tp);
9652
9653         mutex_init(&tp->control);
9654         INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
9655         INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t);
9656         tasklet_setup(&tp->tx_tl, bottom_half);
9657         tasklet_disable(&tp->tx_tl);
9658
9659         netdev->netdev_ops = &rtl8152_netdev_ops;
9660         netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
9661
9662         netdev->features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_SG |
9663                             NETIF_F_TSO | NETIF_F_FRAGLIST | NETIF_F_IPV6_CSUM |
9664                             NETIF_F_TSO6 | NETIF_F_HW_VLAN_CTAG_RX |
9665                             NETIF_F_HW_VLAN_CTAG_TX;
9666         netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_SG |
9667                               NETIF_F_TSO | NETIF_F_FRAGLIST |
9668                               NETIF_F_IPV6_CSUM | NETIF_F_TSO6 |
9669                               NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX;
9670         netdev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
9671                                 NETIF_F_HIGHDMA | NETIF_F_FRAGLIST |
9672                                 NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
9673
9674         if (tp->version == RTL_VER_01) {
9675                 netdev->features &= ~NETIF_F_RXCSUM;
9676                 netdev->hw_features &= ~NETIF_F_RXCSUM;
9677         }
9678
9679         tp->lenovo_macpassthru = rtl8152_supports_lenovo_macpassthru(udev);
9680
9681         if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x3011 && udev->serial &&
9682             (!strcmp(udev->serial, "000001000000") ||
9683              !strcmp(udev->serial, "000002000000"))) {
9684                 dev_info(&udev->dev, "Dell TB16 Dock, disable RX aggregation");
9685                 tp->dell_tb_rx_agg_bug = 1;
9686         }
9687
9688         netdev->ethtool_ops = &ops;
9689         netif_set_tso_max_size(netdev, RTL_LIMITED_TSO_SIZE);
9690
9691         /* MTU range: 68 - 1500 or 9194 */
9692         netdev->min_mtu = ETH_MIN_MTU;
9693         switch (tp->version) {
9694         case RTL_VER_03:
9695         case RTL_VER_04:
9696         case RTL_VER_05:
9697         case RTL_VER_06:
9698         case RTL_VER_08:
9699         case RTL_VER_09:
9700         case RTL_VER_14:
9701                 netdev->max_mtu = size_to_mtu(9 * 1024);
9702                 break;
9703         case RTL_VER_10:
9704         case RTL_VER_11:
9705                 netdev->max_mtu = size_to_mtu(15 * 1024);
9706                 break;
9707         case RTL_VER_12:
9708         case RTL_VER_13:
9709         case RTL_VER_15:
9710                 netdev->max_mtu = size_to_mtu(16 * 1024);
9711                 break;
9712         case RTL_VER_01:
9713         case RTL_VER_02:
9714         case RTL_VER_07:
9715         default:
9716                 netdev->max_mtu = ETH_DATA_LEN;
9717                 break;
9718         }
9719
9720         tp->mii.dev = netdev;
9721         tp->mii.mdio_read = read_mii_word;
9722         tp->mii.mdio_write = write_mii_word;
9723         tp->mii.phy_id_mask = 0x3f;
9724         tp->mii.reg_num_mask = 0x1f;
9725         tp->mii.phy_id = R8152_PHY_ID;
9726
9727         tp->autoneg = AUTONEG_ENABLE;
9728         tp->speed = SPEED_100;
9729         tp->advertising = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
9730                           RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
9731         if (tp->mii.supports_gmii) {
9732                 if (tp->support_2500full &&
9733                     tp->udev->speed >= USB_SPEED_SUPER) {
9734                         tp->speed = SPEED_2500;
9735                         tp->advertising |= RTL_ADVERTISED_2500_FULL;
9736                 } else {
9737                         tp->speed = SPEED_1000;
9738                 }
9739                 tp->advertising |= RTL_ADVERTISED_1000_FULL;
9740         }
9741         tp->duplex = DUPLEX_FULL;
9742
9743         tp->rx_copybreak = RTL8152_RXFG_HEADSZ;
9744         tp->rx_pending = 10 * RTL8152_MAX_RX;
9745
9746         intf->needs_remote_wakeup = 1;
9747
9748         if (!rtl_can_wakeup(tp))
9749                 __rtl_set_wol(tp, 0);
9750         else
9751                 tp->saved_wolopts = __rtl_get_wol(tp);
9752
9753         tp->rtl_ops.init(tp);
9754 #if IS_BUILTIN(CONFIG_USB_RTL8152)
9755         /* Retry in case request_firmware() is not ready yet. */
9756         tp->rtl_fw.retry = true;
9757 #endif
9758         queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
9759         set_ethernet_addr(tp, false);
9760
9761         usb_set_intfdata(intf, tp);
9762
9763         netif_napi_add_weight(netdev, &tp->napi, r8152_poll,
9764                               tp->support_2500full ? 256 : 64);
9765
9766         ret = register_netdev(netdev);
9767         if (ret != 0) {
9768                 dev_err(&intf->dev, "couldn't register the device\n");
9769                 goto out1;
9770         }
9771
9772         if (tp->saved_wolopts)
9773                 device_set_wakeup_enable(&udev->dev, true);
9774         else
9775                 device_set_wakeup_enable(&udev->dev, false);
9776
9777         netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION);
9778
9779         return 0;
9780
9781 out1:
9782         tasklet_kill(&tp->tx_tl);
9783         usb_set_intfdata(intf, NULL);
9784 out:
9785         free_netdev(netdev);
9786         return ret;
9787 }
9788
9789 static void rtl8152_disconnect(struct usb_interface *intf)
9790 {
9791         struct r8152 *tp = usb_get_intfdata(intf);
9792
9793         usb_set_intfdata(intf, NULL);
9794         if (tp) {
9795                 rtl_set_unplug(tp);
9796
9797                 unregister_netdev(tp->netdev);
9798                 tasklet_kill(&tp->tx_tl);
9799                 cancel_delayed_work_sync(&tp->hw_phy_work);
9800                 if (tp->rtl_ops.unload)
9801                         tp->rtl_ops.unload(tp);
9802                 rtl8152_release_firmware(tp);
9803                 free_netdev(tp->netdev);
9804         }
9805 }
9806
9807 /* table of devices that work with this driver */
9808 static const struct usb_device_id rtl8152_table[] = {
9809         /* Realtek */
9810         { USB_DEVICE(VENDOR_ID_REALTEK, 0x8050) },
9811         { USB_DEVICE(VENDOR_ID_REALTEK, 0x8053) },
9812         { USB_DEVICE(VENDOR_ID_REALTEK, 0x8152) },
9813         { USB_DEVICE(VENDOR_ID_REALTEK, 0x8153) },
9814         { USB_DEVICE(VENDOR_ID_REALTEK, 0x8155) },
9815         { USB_DEVICE(VENDOR_ID_REALTEK, 0x8156) },
9816
9817         /* Microsoft */
9818         { USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab) },
9819         { USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6) },
9820         { USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927) },
9821         { USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0c5e) },
9822         { USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101) },
9823         { USB_DEVICE(VENDOR_ID_LENOVO,  0x304f) },
9824         { USB_DEVICE(VENDOR_ID_LENOVO,  0x3054) },
9825         { USB_DEVICE(VENDOR_ID_LENOVO,  0x3062) },
9826         { USB_DEVICE(VENDOR_ID_LENOVO,  0x3069) },
9827         { USB_DEVICE(VENDOR_ID_LENOVO,  0x3082) },
9828         { USB_DEVICE(VENDOR_ID_LENOVO,  0x7205) },
9829         { USB_DEVICE(VENDOR_ID_LENOVO,  0x720c) },
9830         { USB_DEVICE(VENDOR_ID_LENOVO,  0x7214) },
9831         { USB_DEVICE(VENDOR_ID_LENOVO,  0x721e) },
9832         { USB_DEVICE(VENDOR_ID_LENOVO,  0xa387) },
9833         { USB_DEVICE(VENDOR_ID_LINKSYS, 0x0041) },
9834         { USB_DEVICE(VENDOR_ID_NVIDIA,  0x09ff) },
9835         { USB_DEVICE(VENDOR_ID_TPLINK,  0x0601) },
9836         {}
9837 };
9838
9839 MODULE_DEVICE_TABLE(usb, rtl8152_table);
9840
9841 static struct usb_driver rtl8152_driver = {
9842         .name =         MODULENAME,
9843         .id_table =     rtl8152_table,
9844         .probe =        rtl8152_probe,
9845         .disconnect =   rtl8152_disconnect,
9846         .suspend =      rtl8152_suspend,
9847         .resume =       rtl8152_resume,
9848         .reset_resume = rtl8152_reset_resume,
9849         .pre_reset =    rtl8152_pre_reset,
9850         .post_reset =   rtl8152_post_reset,
9851         .supports_autosuspend = 1,
9852         .disable_hub_initiated_lpm = 1,
9853 };
9854
9855 static int rtl8152_cfgselector_probe(struct usb_device *udev)
9856 {
9857         struct usb_host_config *c;
9858         int i, num_configs;
9859
9860         /* Switch the device to vendor mode, if and only if the vendor mode
9861          * driver supports it.
9862          */
9863         if (__rtl_get_hw_ver(udev) == RTL_VER_UNKNOWN)
9864                 return 0;
9865
9866         /* The vendor mode is not always config #1, so to find it out. */
9867         c = udev->config;
9868         num_configs = udev->descriptor.bNumConfigurations;
9869         for (i = 0; i < num_configs; (i++, c++)) {
9870                 struct usb_interface_descriptor *desc = NULL;
9871
9872                 if (!c->desc.bNumInterfaces)
9873                         continue;
9874                 desc = &c->intf_cache[0]->altsetting->desc;
9875                 if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC)
9876                         break;
9877         }
9878
9879         if (i == num_configs)
9880                 return -ENODEV;
9881
9882         if (usb_set_configuration(udev, c->desc.bConfigurationValue)) {
9883                 dev_err(&udev->dev, "Failed to set configuration %d\n",
9884                         c->desc.bConfigurationValue);
9885                 return -ENODEV;
9886         }
9887
9888         return 0;
9889 }
9890
9891 static struct usb_device_driver rtl8152_cfgselector_driver = {
9892         .name =         MODULENAME "-cfgselector",
9893         .probe =        rtl8152_cfgselector_probe,
9894         .id_table =     rtl8152_table,
9895         .generic_subclass = 1,
9896         .supports_autosuspend = 1,
9897 };
9898
9899 static int __init rtl8152_driver_init(void)
9900 {
9901         int ret;
9902
9903         ret = usb_register_device_driver(&rtl8152_cfgselector_driver, THIS_MODULE);
9904         if (ret)
9905                 return ret;
9906         return usb_register(&rtl8152_driver);
9907 }
9908
9909 static void __exit rtl8152_driver_exit(void)
9910 {
9911         usb_deregister(&rtl8152_driver);
9912         usb_deregister_device_driver(&rtl8152_cfgselector_driver);
9913 }
9914
9915 module_init(rtl8152_driver_init);
9916 module_exit(rtl8152_driver_exit);
9917
9918 MODULE_AUTHOR(DRIVER_AUTHOR);
9919 MODULE_DESCRIPTION(DRIVER_DESC);
9920 MODULE_LICENSE("GPL");
9921 MODULE_VERSION(DRIVER_VERSION);