drivers/net/phy/mscc/mscc_main.c

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2 /*
   3  * Driver for Microsemi VSC85xx PHYs
   4  *
   5  * Author: Nagaraju Lakkaraju
   6  * License: Dual MIT/GPL
   7  * Copyright (c) 2016 Microsemi Corporation
   8  */
   9
  10 #include <linux/firmware.h>
  11 #include <linux/jiffies.h>
  12 #include <linux/kernel.h>
  13 #include <linux/module.h>
  14 #include <linux/mdio.h>
  15 #include <linux/mii.h>
  16 #include <linux/phy.h>
  17 #include <linux/of.h>
  18 #include <linux/netdevice.h>
  19 #include <dt-bindings/net/mscc-phy-vsc8531.h>
  20 #include "mscc_serdes.h"
  21 #include "mscc.h"
  22
  23 static const struct vsc85xx_hw_stat vsc85xx_hw_stats[] = {
  24         {
  25                 .string = "phy_receive_errors",
  26                 .reg    = MSCC_PHY_ERR_RX_CNT,
  27                 .page   = MSCC_PHY_PAGE_STANDARD,
  28                 .mask   = ERR_CNT_MASK,
  29         }, {
  30                 .string = "phy_false_carrier",
  31                 .reg    = MSCC_PHY_ERR_FALSE_CARRIER_CNT,
  32                 .page   = MSCC_PHY_PAGE_STANDARD,
  33                 .mask   = ERR_CNT_MASK,
  34         }, {
  35                 .string = "phy_cu_media_link_disconnect",
  36                 .reg    = MSCC_PHY_ERR_LINK_DISCONNECT_CNT,
  37                 .page   = MSCC_PHY_PAGE_STANDARD,
  38                 .mask   = ERR_CNT_MASK,
  39         }, {
  40                 .string = "phy_cu_media_crc_good_count",
  41                 .reg    = MSCC_PHY_CU_MEDIA_CRC_VALID_CNT,
  42                 .page   = MSCC_PHY_PAGE_EXTENDED,
  43                 .mask   = VALID_CRC_CNT_CRC_MASK,
  44         }, {
  45                 .string = "phy_cu_media_crc_error_count",
  46                 .reg    = MSCC_PHY_EXT_PHY_CNTL_4,
  47                 .page   = MSCC_PHY_PAGE_EXTENDED,
  48                 .mask   = ERR_CNT_MASK,
  49         },
  50 };
  51
  52 static const struct vsc85xx_hw_stat vsc8584_hw_stats[] = {
  53         {
  54                 .string = "phy_receive_errors",
  55                 .reg    = MSCC_PHY_ERR_RX_CNT,
  56                 .page   = MSCC_PHY_PAGE_STANDARD,
  57                 .mask   = ERR_CNT_MASK,
  58         }, {
  59                 .string = "phy_false_carrier",
  60                 .reg    = MSCC_PHY_ERR_FALSE_CARRIER_CNT,
  61                 .page   = MSCC_PHY_PAGE_STANDARD,
  62                 .mask   = ERR_CNT_MASK,
  63         }, {
  64                 .string = "phy_cu_media_link_disconnect",
  65                 .reg    = MSCC_PHY_ERR_LINK_DISCONNECT_CNT,
  66                 .page   = MSCC_PHY_PAGE_STANDARD,
  67                 .mask   = ERR_CNT_MASK,
  68         }, {
  69                 .string = "phy_cu_media_crc_good_count",
  70                 .reg    = MSCC_PHY_CU_MEDIA_CRC_VALID_CNT,
  71                 .page   = MSCC_PHY_PAGE_EXTENDED,
  72                 .mask   = VALID_CRC_CNT_CRC_MASK,
  73         }, {
  74                 .string = "phy_cu_media_crc_error_count",
  75                 .reg    = MSCC_PHY_EXT_PHY_CNTL_4,
  76                 .page   = MSCC_PHY_PAGE_EXTENDED,
  77                 .mask   = ERR_CNT_MASK,
  78         }, {
  79                 .string = "phy_serdes_tx_good_pkt_count",
  80                 .reg    = MSCC_PHY_SERDES_TX_VALID_CNT,
  81                 .page   = MSCC_PHY_PAGE_EXTENDED_3,
  82                 .mask   = VALID_CRC_CNT_CRC_MASK,
  83         }, {
  84                 .string = "phy_serdes_tx_bad_crc_count",
  85                 .reg    = MSCC_PHY_SERDES_TX_CRC_ERR_CNT,
  86                 .page   = MSCC_PHY_PAGE_EXTENDED_3,
  87                 .mask   = ERR_CNT_MASK,
  88         }, {
  89                 .string = "phy_serdes_rx_good_pkt_count",
  90                 .reg    = MSCC_PHY_SERDES_RX_VALID_CNT,
  91                 .page   = MSCC_PHY_PAGE_EXTENDED_3,
  92                 .mask   = VALID_CRC_CNT_CRC_MASK,
  93         }, {
  94                 .string = "phy_serdes_rx_bad_crc_count",
  95                 .reg    = MSCC_PHY_SERDES_RX_CRC_ERR_CNT,
  96                 .page   = MSCC_PHY_PAGE_EXTENDED_3,
  97                 .mask   = ERR_CNT_MASK,
  98         },
  99 };
 100
 101 #if IS_ENABLED(CONFIG_OF_MDIO)
 102 static const struct vsc8531_edge_rate_table edge_table[] = {
 103         {MSCC_VDDMAC_3300, { 0, 2,  4,  7, 10, 17, 29, 53} },
 104         {MSCC_VDDMAC_2500, { 0, 3,  6, 10, 14, 23, 37, 63} },
 105         {MSCC_VDDMAC_1800, { 0, 5,  9, 16, 23, 35, 52, 76} },
 106         {MSCC_VDDMAC_1500, { 0, 6, 14, 21, 29, 42, 58, 77} },
 107 };
 108 #endif
 109
 110 static int vsc85xx_phy_read_page(struct phy_device *phydev)
 111 {
 112         return __phy_read(phydev, MSCC_EXT_PAGE_ACCESS);
 113 }
 114
 115 static int vsc85xx_phy_write_page(struct phy_device *phydev, int page)
 116 {
 117         return __phy_write(phydev, MSCC_EXT_PAGE_ACCESS, page);
 118 }
 119
 120 static int vsc85xx_get_sset_count(struct phy_device *phydev)
 121 {
 122         struct vsc8531_private *priv = phydev->priv;
 123
 124         if (!priv)
 125                 return 0;
 126
 127         return priv->nstats;
 128 }
 129
 130 static void vsc85xx_get_strings(struct phy_device *phydev, u8 *data)
 131 {
 132         struct vsc8531_private *priv = phydev->priv;
 133         int i;
 134
 135         if (!priv)
 136                 return;
 137
 138         for (i = 0; i < priv->nstats; i++)
 139                 strlcpy(data + i * ETH_GSTRING_LEN, priv->hw_stats[i].string,
 140                         ETH_GSTRING_LEN);
 141 }
 142
 143 static u64 vsc85xx_get_stat(struct phy_device *phydev, int i)
 144 {
 145         struct vsc8531_private *priv = phydev->priv;
 146         int val;
 147
 148         val = phy_read_paged(phydev, priv->hw_stats[i].page,
 149                              priv->hw_stats[i].reg);
 150         if (val < 0)
 151                 return U64_MAX;
 152
 153         val = val & priv->hw_stats[i].mask;
 154         priv->stats[i] += val;
 155
 156         return priv->stats[i];
 157 }
 158
 159 static void vsc85xx_get_stats(struct phy_device *phydev,
 160                               struct ethtool_stats *stats, u64 *data)
 161 {
 162         struct vsc8531_private *priv = phydev->priv;
 163         int i;
 164
 165         if (!priv)
 166                 return;
 167
 168         for (i = 0; i < priv->nstats; i++)
 169                 data[i] = vsc85xx_get_stat(phydev, i);
 170 }
 171
 172 static int vsc85xx_led_cntl_set(struct phy_device *phydev,
 173                                 u8 led_num,
 174                                 u8 mode)
 175 {
 176         int rc;
 177         u16 reg_val;
 178
 179         mutex_lock(&phydev->lock);
 180         reg_val = phy_read(phydev, MSCC_PHY_LED_MODE_SEL);
 181         reg_val &= ~LED_MODE_SEL_MASK(led_num);
 182         reg_val |= LED_MODE_SEL(led_num, (u16)mode);
 183         rc = phy_write(phydev, MSCC_PHY_LED_MODE_SEL, reg_val);
 184         mutex_unlock(&phydev->lock);
 185
 186         return rc;
 187 }
 188
 189 static int vsc85xx_mdix_get(struct phy_device *phydev, u8 *mdix)
 190 {
 191         u16 reg_val;
 192
 193         reg_val = phy_read(phydev, MSCC_PHY_DEV_AUX_CNTL);
 194         if (reg_val & HP_AUTO_MDIX_X_OVER_IND_MASK)
 195                 *mdix = ETH_TP_MDI_X;
 196         else
 197                 *mdix = ETH_TP_MDI;
 198
 199         return 0;
 200 }
 201
 202 static int vsc85xx_mdix_set(struct phy_device *phydev, u8 mdix)
 203 {
 204         int rc;
 205         u16 reg_val;
 206
 207         reg_val = phy_read(phydev, MSCC_PHY_BYPASS_CONTROL);
 208         if (mdix == ETH_TP_MDI || mdix == ETH_TP_MDI_X) {
 209                 reg_val |= (DISABLE_PAIR_SWAP_CORR_MASK |
 210                             DISABLE_POLARITY_CORR_MASK  |
 211                             DISABLE_HP_AUTO_MDIX_MASK);
 212         } else {
 213                 reg_val &= ~(DISABLE_PAIR_SWAP_CORR_MASK |
 214                              DISABLE_POLARITY_CORR_MASK  |
 215                              DISABLE_HP_AUTO_MDIX_MASK);
 216         }
 217         rc = phy_write(phydev, MSCC_PHY_BYPASS_CONTROL, reg_val);
 218         if (rc)
 219                 return rc;
 220
 221         reg_val = 0;
 222
 223         if (mdix == ETH_TP_MDI)
 224                 reg_val = FORCE_MDI_CROSSOVER_MDI;
 225         else if (mdix == ETH_TP_MDI_X)
 226                 reg_val = FORCE_MDI_CROSSOVER_MDIX;
 227
 228         rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED,
 229                               MSCC_PHY_EXT_MODE_CNTL, FORCE_MDI_CROSSOVER_MASK,
 230                               reg_val);
 231         if (rc < 0)
 232                 return rc;
 233
 234         return genphy_restart_aneg(phydev);
 235 }
 236
 237 static int vsc85xx_downshift_get(struct phy_device *phydev, u8 *count)
 238 {
 239         int reg_val;
 240
 241         reg_val = phy_read_paged(phydev, MSCC_PHY_PAGE_EXTENDED,
 242                                  MSCC_PHY_ACTIPHY_CNTL);
 243         if (reg_val < 0)
 244                 return reg_val;
 245
 246         reg_val &= DOWNSHIFT_CNTL_MASK;
 247         if (!(reg_val & DOWNSHIFT_EN))
 248                 *count = DOWNSHIFT_DEV_DISABLE;
 249         else
 250                 *count = ((reg_val & ~DOWNSHIFT_EN) >> DOWNSHIFT_CNTL_POS) + 2;
 251
 252         return 0;
 253 }
 254
 255 static int vsc85xx_downshift_set(struct phy_device *phydev, u8 count)
 256 {
 257         if (count == DOWNSHIFT_DEV_DEFAULT_COUNT) {
 258                 /* Default downshift count 3 (i.e. Bit3:2 = 0b01) */
 259                 count = ((1 << DOWNSHIFT_CNTL_POS) | DOWNSHIFT_EN);
 260         } else if (count > DOWNSHIFT_COUNT_MAX || count == 1) {
 261                 phydev_err(phydev, "Downshift count should be 2,3,4 or 5\n");
 262                 return -ERANGE;
 263         } else if (count) {
 264                 /* Downshift count is either 2,3,4 or 5 */
 265                 count = (((count - 2) << DOWNSHIFT_CNTL_POS) | DOWNSHIFT_EN);
 266         }
 267
 268         return phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED,
 269                                 MSCC_PHY_ACTIPHY_CNTL, DOWNSHIFT_CNTL_MASK,
 270                                 count);
 271 }
 272
 273 static int vsc85xx_wol_set(struct phy_device *phydev,
 274                            struct ethtool_wolinfo *wol)
 275 {
 276         const u8 *mac_addr = phydev->attached_dev->dev_addr;
 277         int rc;
 278         u16 reg_val;
 279         u8  i;
 280         u16 pwd[3] = {0, 0, 0};
 281         struct ethtool_wolinfo *wol_conf = wol;
 282
 283         mutex_lock(&phydev->lock);
 284         rc = phy_select_page(phydev, MSCC_PHY_PAGE_EXTENDED_2);
 285         if (rc < 0) {
 286                 rc = phy_restore_page(phydev, rc, rc);
 287                 goto out_unlock;
 288         }
 289
 290         if (wol->wolopts & WAKE_MAGIC) {
 291                 /* Store the device address for the magic packet */
 292                 for (i = 0; i < ARRAY_SIZE(pwd); i++)
 293                         pwd[i] = mac_addr[5 - (i * 2 + 1)] << 8 |
 294                                  mac_addr[5 - i * 2];
 295                 __phy_write(phydev, MSCC_PHY_WOL_LOWER_MAC_ADDR, pwd[0]);
 296                 __phy_write(phydev, MSCC_PHY_WOL_MID_MAC_ADDR, pwd[1]);
 297                 __phy_write(phydev, MSCC_PHY_WOL_UPPER_MAC_ADDR, pwd[2]);
 298         } else {
 299                 __phy_write(phydev, MSCC_PHY_WOL_LOWER_MAC_ADDR, 0);
 300                 __phy_write(phydev, MSCC_PHY_WOL_MID_MAC_ADDR, 0);
 301                 __phy_write(phydev, MSCC_PHY_WOL_UPPER_MAC_ADDR, 0);
 302         }
 303
 304         if (wol_conf->wolopts & WAKE_MAGICSECURE) {
 305                 for (i = 0; i < ARRAY_SIZE(pwd); i++)
 306                         pwd[i] = wol_conf->sopass[5 - (i * 2 + 1)] << 8 |
 307                                  wol_conf->sopass[5 - i * 2];
 308                 __phy_write(phydev, MSCC_PHY_WOL_LOWER_PASSWD, pwd[0]);
 309                 __phy_write(phydev, MSCC_PHY_WOL_MID_PASSWD, pwd[1]);
 310                 __phy_write(phydev, MSCC_PHY_WOL_UPPER_PASSWD, pwd[2]);
 311         } else {
 312                 __phy_write(phydev, MSCC_PHY_WOL_LOWER_PASSWD, 0);
 313                 __phy_write(phydev, MSCC_PHY_WOL_MID_PASSWD, 0);
 314                 __phy_write(phydev, MSCC_PHY_WOL_UPPER_PASSWD, 0);
 315         }
 316
 317         reg_val = __phy_read(phydev, MSCC_PHY_WOL_MAC_CONTROL);
 318         if (wol_conf->wolopts & WAKE_MAGICSECURE)
 319                 reg_val |= SECURE_ON_ENABLE;
 320         else
 321                 reg_val &= ~SECURE_ON_ENABLE;
 322         __phy_write(phydev, MSCC_PHY_WOL_MAC_CONTROL, reg_val);
 323
 324         rc = phy_restore_page(phydev, rc, rc > 0 ? 0 : rc);
 325         if (rc < 0)
 326                 goto out_unlock;
 327
 328         if (wol->wolopts & WAKE_MAGIC) {
 329                 /* Enable the WOL interrupt */
 330                 reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK);
 331                 reg_val |= MII_VSC85XX_INT_MASK_WOL;
 332                 rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val);
 333                 if (rc)
 334                         goto out_unlock;
 335         } else {
 336                 /* Disable the WOL interrupt */
 337                 reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK);
 338                 reg_val &= (~MII_VSC85XX_INT_MASK_WOL);
 339                 rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val);
 340                 if (rc)
 341                         goto out_unlock;
 342         }
 343         /* Clear WOL iterrupt status */
 344         reg_val = phy_read(phydev, MII_VSC85XX_INT_STATUS);
 345
 346 out_unlock:
 347         mutex_unlock(&phydev->lock);
 348
 349         return rc;
 350 }
 351
 352 static void vsc85xx_wol_get(struct phy_device *phydev,
 353                             struct ethtool_wolinfo *wol)
 354 {
 355         int rc;
 356         u16 reg_val;
 357         u8  i;
 358         u16 pwd[3] = {0, 0, 0};
 359         struct ethtool_wolinfo *wol_conf = wol;
 360
 361         mutex_lock(&phydev->lock);
 362         rc = phy_select_page(phydev, MSCC_PHY_PAGE_EXTENDED_2);
 363         if (rc < 0)
 364                 goto out_unlock;
 365
 366         reg_val = __phy_read(phydev, MSCC_PHY_WOL_MAC_CONTROL);
 367         if (reg_val & SECURE_ON_ENABLE)
 368                 wol_conf->wolopts |= WAKE_MAGICSECURE;
 369         if (wol_conf->wolopts & WAKE_MAGICSECURE) {
 370                 pwd[0] = __phy_read(phydev, MSCC_PHY_WOL_LOWER_PASSWD);
 371                 pwd[1] = __phy_read(phydev, MSCC_PHY_WOL_MID_PASSWD);
 372                 pwd[2] = __phy_read(phydev, MSCC_PHY_WOL_UPPER_PASSWD);
 373                 for (i = 0; i < ARRAY_SIZE(pwd); i++) {
 374                         wol_conf->sopass[5 - i * 2] = pwd[i] & 0x00ff;
 375                         wol_conf->sopass[5 - (i * 2 + 1)] = (pwd[i] & 0xff00)
 376                                                             >> 8;
 377                 }
 378         }
 379
 380 out_unlock:
 381         phy_restore_page(phydev, rc, rc > 0 ? 0 : rc);
 382         mutex_unlock(&phydev->lock);
 383 }
 384
 385 #if IS_ENABLED(CONFIG_OF_MDIO)
 386 static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
 387 {
 388         u32 vdd, sd;
 389         int i, j;
 390         struct device *dev = &phydev->mdio.dev;
 391         struct device_node *of_node = dev->of_node;
 392         u8 sd_array_size = ARRAY_SIZE(edge_table[0].slowdown);
 393
 394         if (!of_node)
 395                 return -ENODEV;
 396
 397         if (of_property_read_u32(of_node, "vsc8531,vddmac", &vdd))
 398                 vdd = MSCC_VDDMAC_3300;
 399
 400         if (of_property_read_u32(of_node, "vsc8531,edge-slowdown", &sd))
 401                 sd = 0;
 402
 403         for (i = 0; i < ARRAY_SIZE(edge_table); i++)
 404                 if (edge_table[i].vddmac == vdd)
 405                         for (j = 0; j < sd_array_size; j++)
 406                                 if (edge_table[i].slowdown[j] == sd)
 407                                         return (sd_array_size - j - 1);
 408
 409         return -EINVAL;
 410 }
 411
 412 static int vsc85xx_dt_led_mode_get(struct phy_device *phydev,
 413                                    char *led,
 414                                    u32 default_mode)
 415 {
 416         struct vsc8531_private *priv = phydev->priv;
 417         struct device *dev = &phydev->mdio.dev;
 418         struct device_node *of_node = dev->of_node;
 419         u32 led_mode;
 420         int err;
 421
 422         if (!of_node)
 423                 return -ENODEV;
 424
 425         led_mode = default_mode;
 426         err = of_property_read_u32(of_node, led, &led_mode);
 427         if (!err && !(BIT(led_mode) & priv->supp_led_modes)) {
 428                 phydev_err(phydev, "DT %s invalid\n", led);
 429                 return -EINVAL;
 430         }
 431
 432         return led_mode;
 433 }
 434
 435 #else
 436 static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
 437 {
 438         return 0;
 439 }
 440
 441 static int vsc85xx_dt_led_mode_get(struct phy_device *phydev,
 442                                    char *led,
 443                                    u8 default_mode)
 444 {
 445         return default_mode;
 446 }
 447 #endif /* CONFIG_OF_MDIO */
 448
 449 static int vsc85xx_dt_led_modes_get(struct phy_device *phydev,
 450                                     u32 *default_mode)
 451 {
 452         struct vsc8531_private *priv = phydev->priv;
 453         char led_dt_prop[28];
 454         int i, ret;
 455
 456         for (i = 0; i < priv->nleds; i++) {
 457                 ret = sprintf(led_dt_prop, "vsc8531,led-%d-mode", i);
 458                 if (ret < 0)
 459                         return ret;
 460
 461                 ret = vsc85xx_dt_led_mode_get(phydev, led_dt_prop,
 462                                               default_mode[i]);
 463                 if (ret < 0)
 464                         return ret;
 465                 priv->leds_mode[i] = ret;
 466         }
 467
 468         return 0;
 469 }
 470
 471 static int vsc85xx_edge_rate_cntl_set(struct phy_device *phydev, u8 edge_rate)
 472 {
 473         int rc;
 474
 475         mutex_lock(&phydev->lock);
 476         rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2,
 477                               MSCC_PHY_WOL_MAC_CONTROL, EDGE_RATE_CNTL_MASK,
 478                               edge_rate << EDGE_RATE_CNTL_POS);
 479         mutex_unlock(&phydev->lock);
 480
 481         return rc;
 482 }
 483
 484 static int vsc85xx_mac_if_set(struct phy_device *phydev,
 485                               phy_interface_t interface)
 486 {
 487         int rc;
 488         u16 reg_val;
 489
 490         mutex_lock(&phydev->lock);
 491         reg_val = phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_1);
 492         reg_val &= ~(MAC_IF_SELECTION_MASK);
 493         switch (interface) {
 494         case PHY_INTERFACE_MODE_RGMII_TXID:
 495         case PHY_INTERFACE_MODE_RGMII_RXID:
 496         case PHY_INTERFACE_MODE_RGMII_ID:
 497         case PHY_INTERFACE_MODE_RGMII:
 498                 reg_val |= (MAC_IF_SELECTION_RGMII << MAC_IF_SELECTION_POS);
 499                 break;
 500         case PHY_INTERFACE_MODE_RMII:
 501                 reg_val |= (MAC_IF_SELECTION_RMII << MAC_IF_SELECTION_POS);
 502                 break;
 503         case PHY_INTERFACE_MODE_MII:
 504         case PHY_INTERFACE_MODE_GMII:
 505                 reg_val |= (MAC_IF_SELECTION_GMII << MAC_IF_SELECTION_POS);
 506                 break;
 507         default:
 508                 rc = -EINVAL;
 509                 goto out_unlock;
 510         }
 511         rc = phy_write(phydev, MSCC_PHY_EXT_PHY_CNTL_1, reg_val);
 512         if (rc)
 513                 goto out_unlock;
 514
 515         rc = genphy_soft_reset(phydev);
 516
 517 out_unlock:
 518         mutex_unlock(&phydev->lock);
 519
 520         return rc;
 521 }
 522
 523 /* Set the RGMII RX and TX clock skews individually, according to the PHY
 524  * interface type, to:
 525  *  * 0.2 ns (their default, and lowest, hardware value) if delays should
 526  *    not be enabled
 527  *  * 2.0 ns (which causes the data to be sampled at exactly half way between
 528  *    clock transitions at 1000 Mbps) if delays should be enabled
 529  */
 530 static int vsc85xx_rgmii_set_skews(struct phy_device *phydev, u32 rgmii_cntl,
 531                                    u16 rgmii_rx_delay_mask,
 532                                    u16 rgmii_tx_delay_mask)
 533 {
 534         u16 rgmii_rx_delay_pos = ffs(rgmii_rx_delay_mask) - 1;
 535         u16 rgmii_tx_delay_pos = ffs(rgmii_tx_delay_mask) - 1;
 536         u16 reg_val = 0;
 537         int rc;
 538
 539         mutex_lock(&phydev->lock);
 540
 541         if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
 542             phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
 543                 reg_val |= RGMII_CLK_DELAY_2_0_NS << rgmii_rx_delay_pos;
 544         if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
 545             phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
 546                 reg_val |= RGMII_CLK_DELAY_2_0_NS << rgmii_tx_delay_pos;
 547
 548         rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2,
 549                               rgmii_cntl,
 550                               rgmii_rx_delay_mask | rgmii_tx_delay_mask,
 551                               reg_val);
 552
 553         mutex_unlock(&phydev->lock);
 554
 555         return rc;
 556 }
 557
 558 static int vsc85xx_default_config(struct phy_device *phydev)
 559 {
 560         int rc;
 561
 562         phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
 563
 564         if (phy_interface_mode_is_rgmii(phydev->interface)) {
 565                 rc = vsc85xx_rgmii_set_skews(phydev, VSC8502_RGMII_CNTL,
 566                                              VSC8502_RGMII_RX_DELAY_MASK,
 567                                              VSC8502_RGMII_TX_DELAY_MASK);
 568                 if (rc)
 569                         return rc;
 570         }
 571
 572         return 0;
 573 }
 574
 575 static int vsc85xx_get_tunable(struct phy_device *phydev,
 576                                struct ethtool_tunable *tuna, void *data)
 577 {
 578         switch (tuna->id) {
 579         case ETHTOOL_PHY_DOWNSHIFT:
 580                 return vsc85xx_downshift_get(phydev, (u8 *)data);
 581         default:
 582                 return -EINVAL;
 583         }
 584 }
 585
 586 static int vsc85xx_set_tunable(struct phy_device *phydev,
 587                                struct ethtool_tunable *tuna,
 588                                const void *data)
 589 {
 590         switch (tuna->id) {
 591         case ETHTOOL_PHY_DOWNSHIFT:
 592                 return vsc85xx_downshift_set(phydev, *(u8 *)data);
 593         default:
 594                 return -EINVAL;
 595         }
 596 }
 597
 598 /* mdiobus lock should be locked when using this function */
 599 static void vsc85xx_tr_write(struct phy_device *phydev, u16 addr, u32 val)
 600 {
 601         __phy_write(phydev, MSCC_PHY_TR_MSB, val >> 16);
 602         __phy_write(phydev, MSCC_PHY_TR_LSB, val & GENMASK(15, 0));
 603         __phy_write(phydev, MSCC_PHY_TR_CNTL, TR_WRITE | TR_ADDR(addr));
 604 }
 605
 606 static int vsc8531_pre_init_seq_set(struct phy_device *phydev)
 607 {
 608         int rc;
 609         static const struct reg_val init_seq[] = {
 610                 {0x0f90, 0x00688980},
 611                 {0x0696, 0x00000003},
 612                 {0x07fa, 0x0050100f},
 613                 {0x1686, 0x00000004},
 614         };
 615         unsigned int i;
 616         int oldpage;
 617
 618         rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_STANDARD,
 619                               MSCC_PHY_EXT_CNTL_STATUS, SMI_BROADCAST_WR_EN,
 620                               SMI_BROADCAST_WR_EN);
 621         if (rc < 0)
 622                 return rc;
 623         rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_TEST,
 624                               MSCC_PHY_TEST_PAGE_24, 0, 0x0400);
 625         if (rc < 0)
 626                 return rc;
 627         rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_TEST,
 628                               MSCC_PHY_TEST_PAGE_5, 0x0a00, 0x0e00);
 629         if (rc < 0)
 630                 return rc;
 631         rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_TEST,
 632                               MSCC_PHY_TEST_PAGE_8, TR_CLK_DISABLE, TR_CLK_DISABLE);
 633         if (rc < 0)
 634                 return rc;
 635
 636         mutex_lock(&phydev->lock);
 637         oldpage = phy_select_page(phydev, MSCC_PHY_PAGE_TR);
 638         if (oldpage < 0)
 639                 goto out_unlock;
 640
 641         for (i = 0; i < ARRAY_SIZE(init_seq); i++)
 642                 vsc85xx_tr_write(phydev, init_seq[i].reg, init_seq[i].val);
 643
 644 out_unlock:
 645         oldpage = phy_restore_page(phydev, oldpage, oldpage);
 646         mutex_unlock(&phydev->lock);
 647
 648         return oldpage;
 649 }
 650
 651 static int vsc85xx_eee_init_seq_set(struct phy_device *phydev)
 652 {
 653         static const struct reg_val init_eee[] = {
 654                 {0x0f82, 0x0012b00a},
 655                 {0x1686, 0x00000004},
 656                 {0x168c, 0x00d2c46f},
 657                 {0x17a2, 0x00000620},
 658                 {0x16a0, 0x00eeffdd},
 659                 {0x16a6, 0x00071448},
 660                 {0x16a4, 0x0013132f},
 661                 {0x16a8, 0x00000000},
 662                 {0x0ffc, 0x00c0a028},
 663                 {0x0fe8, 0x0091b06c},
 664                 {0x0fea, 0x00041600},
 665                 {0x0f80, 0x00000af4},
 666                 {0x0fec, 0x00901809},
 667                 {0x0fee, 0x0000a6a1},
 668                 {0x0ffe, 0x00b01007},
 669                 {0x16b0, 0x00eeff00},
 670                 {0x16b2, 0x00007000},
 671                 {0x16b4, 0x00000814},
 672         };
 673         unsigned int i;
 674         int oldpage;
 675
 676         mutex_lock(&phydev->lock);
 677         oldpage = phy_select_page(phydev, MSCC_PHY_PAGE_TR);
 678         if (oldpage < 0)
 679                 goto out_unlock;
 680
 681         for (i = 0; i < ARRAY_SIZE(init_eee); i++)
 682                 vsc85xx_tr_write(phydev, init_eee[i].reg, init_eee[i].val);
 683
 684 out_unlock:
 685         oldpage = phy_restore_page(phydev, oldpage, oldpage);
 686         mutex_unlock(&phydev->lock);
 687
 688         return oldpage;
 689 }
 690
 691 /* phydev->bus->mdio_lock should be locked when using this function */
 692 int phy_base_write(struct phy_device *phydev, u32 regnum, u16 val)
 693 {
 694         if (unlikely(!mutex_is_locked(&phydev->mdio.bus->mdio_lock))) {
 695                 dev_err(&phydev->mdio.dev, "MDIO bus lock not held!\n");
 696                 dump_stack();
 697         }
 698
 699         return __phy_package_write(phydev, regnum, val);
 700 }
 701
 702 /* phydev->bus->mdio_lock should be locked when using this function */
 703 int phy_base_read(struct phy_device *phydev, u32 regnum)
 704 {
 705         if (unlikely(!mutex_is_locked(&phydev->mdio.bus->mdio_lock))) {
 706                 dev_err(&phydev->mdio.dev, "MDIO bus lock not held!\n");
 707                 dump_stack();
 708         }
 709
 710         return __phy_package_read(phydev, regnum);
 711 }
 712
 713 u32 vsc85xx_csr_read(struct phy_device *phydev,
 714                      enum csr_target target, u32 reg)
 715 {
 716         unsigned long deadline;
 717         u32 val, val_l, val_h;
 718
 719         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_CSR_CNTL);
 720
 721         /* CSR registers are grouped under different Target IDs.
 722          * 6-bit Target_ID is split between MSCC_EXT_PAGE_CSR_CNTL_20 and
 723          * MSCC_EXT_PAGE_CSR_CNTL_19 registers.
 724          * Target_ID[5:2] maps to bits[3:0] of MSCC_EXT_PAGE_CSR_CNTL_20
 725          * and Target_ID[1:0] maps to bits[13:12] of MSCC_EXT_PAGE_CSR_CNTL_19.
 726          */
 727
 728         /* Setup the Target ID */
 729         phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_20,
 730                        MSCC_PHY_CSR_CNTL_20_TARGET(target >> 2));
 731
 732         if ((target >> 2 == 0x1) || (target >> 2 == 0x3))
 733                 /* non-MACsec access */
 734                 target &= 0x3;
 735         else
 736                 target = 0;
 737
 738         /* Trigger CSR Action - Read into the CSR's */
 739         phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_19,
 740                        MSCC_PHY_CSR_CNTL_19_CMD | MSCC_PHY_CSR_CNTL_19_READ |
 741                        MSCC_PHY_CSR_CNTL_19_REG_ADDR(reg) |
 742                        MSCC_PHY_CSR_CNTL_19_TARGET(target));
 743
 744         /* Wait for register access*/
 745         deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS);
 746         do {
 747                 usleep_range(500, 1000);
 748                 val = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_19);
 749         } while (time_before(jiffies, deadline) &&
 750                 !(val & MSCC_PHY_CSR_CNTL_19_CMD));
 751
 752         if (!(val & MSCC_PHY_CSR_CNTL_19_CMD))
 753                 return 0xffffffff;
 754
 755         /* Read the Least Significant Word (LSW) (17) */
 756         val_l = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_17);
 757
 758         /* Read the Most Significant Word (MSW) (18) */
 759         val_h = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_18);
 760
 761         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
 762                        MSCC_PHY_PAGE_STANDARD);
 763
 764         return (val_h << 16) | val_l;
 765 }
 766
 767 int vsc85xx_csr_write(struct phy_device *phydev,
 768                       enum csr_target target, u32 reg, u32 val)
 769 {
 770         unsigned long deadline;
 771
 772         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_CSR_CNTL);
 773
 774         /* CSR registers are grouped under different Target IDs.
 775          * 6-bit Target_ID is split between MSCC_EXT_PAGE_CSR_CNTL_20 and
 776          * MSCC_EXT_PAGE_CSR_CNTL_19 registers.
 777          * Target_ID[5:2] maps to bits[3:0] of MSCC_EXT_PAGE_CSR_CNTL_20
 778          * and Target_ID[1:0] maps to bits[13:12] of MSCC_EXT_PAGE_CSR_CNTL_19.
 779          */
 780
 781         /* Setup the Target ID */
 782         phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_20,
 783                        MSCC_PHY_CSR_CNTL_20_TARGET(target >> 2));
 784
 785         /* Write the Least Significant Word (LSW) (17) */
 786         phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_17, (u16)val);
 787
 788         /* Write the Most Significant Word (MSW) (18) */
 789         phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_18, (u16)(val >> 16));
 790
 791         if ((target >> 2 == 0x1) || (target >> 2 == 0x3))
 792                 /* non-MACsec access */
 793                 target &= 0x3;
 794         else
 795                 target = 0;
 796
 797         /* Trigger CSR Action - Write into the CSR's */
 798         phy_base_write(phydev, MSCC_EXT_PAGE_CSR_CNTL_19,
 799                        MSCC_PHY_CSR_CNTL_19_CMD |
 800                        MSCC_PHY_CSR_CNTL_19_REG_ADDR(reg) |
 801                        MSCC_PHY_CSR_CNTL_19_TARGET(target));
 802
 803         /* Wait for register access */
 804         deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS);
 805         do {
 806                 usleep_range(500, 1000);
 807                 val = phy_base_read(phydev, MSCC_EXT_PAGE_CSR_CNTL_19);
 808         } while (time_before(jiffies, deadline) &&
 809                  !(val & MSCC_PHY_CSR_CNTL_19_CMD));
 810
 811         if (!(val & MSCC_PHY_CSR_CNTL_19_CMD))
 812                 return -ETIMEDOUT;
 813
 814         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
 815                        MSCC_PHY_PAGE_STANDARD);
 816
 817         return 0;
 818 }
 819
 820 /* bus->mdio_lock should be locked when using this function */
 821 static void vsc8584_csr_write(struct phy_device *phydev, u16 addr, u32 val)
 822 {
 823         phy_base_write(phydev, MSCC_PHY_TR_MSB, val >> 16);
 824         phy_base_write(phydev, MSCC_PHY_TR_LSB, val & GENMASK(15, 0));
 825         phy_base_write(phydev, MSCC_PHY_TR_CNTL, TR_WRITE | TR_ADDR(addr));
 826 }
 827
 828 /* bus->mdio_lock should be locked when using this function */
 829 int vsc8584_cmd(struct phy_device *phydev, u16 val)
 830 {
 831         unsigned long deadline;
 832         u16 reg_val;
 833
 834         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
 835                        MSCC_PHY_PAGE_EXTENDED_GPIO);
 836
 837         phy_base_write(phydev, MSCC_PHY_PROC_CMD, PROC_CMD_NCOMPLETED | val);
 838
 839         deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS);
 840         do {
 841                 reg_val = phy_base_read(phydev, MSCC_PHY_PROC_CMD);
 842         } while (time_before(jiffies, deadline) &&
 843                  (reg_val & PROC_CMD_NCOMPLETED) &&
 844                  !(reg_val & PROC_CMD_FAILED));
 845
 846         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
 847
 848         if (reg_val & PROC_CMD_FAILED)
 849                 return -EIO;
 850
 851         if (reg_val & PROC_CMD_NCOMPLETED)
 852                 return -ETIMEDOUT;
 853
 854         return 0;
 855 }
 856
 857 /* bus->mdio_lock should be locked when using this function */
 858 static int vsc8584_micro_deassert_reset(struct phy_device *phydev,
 859                                         bool patch_en)
 860 {
 861         u32 enable, release;
 862
 863         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
 864                        MSCC_PHY_PAGE_EXTENDED_GPIO);
 865
 866         enable = RUN_FROM_INT_ROM | MICRO_CLK_EN | DW8051_CLK_EN;
 867         release = MICRO_NSOFT_RESET | RUN_FROM_INT_ROM | DW8051_CLK_EN |
 868                 MICRO_CLK_EN;
 869
 870         if (patch_en) {
 871                 enable |= MICRO_PATCH_EN;
 872                 release |= MICRO_PATCH_EN;
 873
 874                 /* Clear all patches */
 875                 phy_base_write(phydev, MSCC_INT_MEM_CNTL, READ_RAM);
 876         }
 877
 878         /* Enable 8051 Micro clock; CLEAR/SET patch present; disable PRAM clock
 879          * override and addr. auto-incr; operate at 125 MHz
 880          */
 881         phy_base_write(phydev, MSCC_DW8051_CNTL_STATUS, enable);
 882         /* Release 8051 Micro SW reset */
 883         phy_base_write(phydev, MSCC_DW8051_CNTL_STATUS, release);
 884
 885         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
 886
 887         return 0;
 888 }
 889
 890 /* bus->mdio_lock should be locked when using this function */
 891 static int vsc8584_micro_assert_reset(struct phy_device *phydev)
 892 {
 893         int ret;
 894         u16 reg;
 895
 896         ret = vsc8584_cmd(phydev, PROC_CMD_NOP);
 897         if (ret)
 898                 return ret;
 899
 900         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
 901                        MSCC_PHY_PAGE_EXTENDED_GPIO);
 902
 903         reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL);
 904         reg &= ~EN_PATCH_RAM_TRAP_ADDR(4);
 905         phy_base_write(phydev, MSCC_INT_MEM_CNTL, reg);
 906
 907         phy_base_write(phydev, MSCC_TRAP_ROM_ADDR(4), 0x005b);
 908         phy_base_write(phydev, MSCC_PATCH_RAM_ADDR(4), 0x005b);
 909
 910         reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL);
 911         reg |= EN_PATCH_RAM_TRAP_ADDR(4);
 912         phy_base_write(phydev, MSCC_INT_MEM_CNTL, reg);
 913
 914         phy_base_write(phydev, MSCC_PHY_PROC_CMD, PROC_CMD_NOP);
 915
 916         reg = phy_base_read(phydev, MSCC_DW8051_CNTL_STATUS);
 917         reg &= ~MICRO_NSOFT_RESET;
 918         phy_base_write(phydev, MSCC_DW8051_CNTL_STATUS, reg);
 919
 920         phy_base_write(phydev, MSCC_PHY_PROC_CMD, PROC_CMD_MCB_ACCESS_MAC_CONF |
 921                        PROC_CMD_SGMII_PORT(0) | PROC_CMD_NO_MAC_CONF |
 922                        PROC_CMD_READ);
 923
 924         reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL);
 925         reg &= ~EN_PATCH_RAM_TRAP_ADDR(4);
 926         phy_base_write(phydev, MSCC_INT_MEM_CNTL, reg);
 927
 928         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
 929
 930         return 0;
 931 }
 932
 933 /* bus->mdio_lock should be locked when using this function */
 934 static int vsc8584_get_fw_crc(struct phy_device *phydev, u16 start, u16 size,
 935                               u16 *crc)
 936 {
 937         int ret;
 938
 939         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED);
 940
 941         phy_base_write(phydev, MSCC_PHY_VERIPHY_CNTL_2, start);
 942         phy_base_write(phydev, MSCC_PHY_VERIPHY_CNTL_3, size);
 943
 944         /* Start Micro command */
 945         ret = vsc8584_cmd(phydev, PROC_CMD_CRC16);
 946         if (ret)
 947                 goto out;
 948
 949         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED);
 950
 951         *crc = phy_base_read(phydev, MSCC_PHY_VERIPHY_CNTL_2);
 952
 953 out:
 954         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
 955
 956         return ret;
 957 }
 958
 959 /* bus->mdio_lock should be locked when using this function */
 960 static int vsc8584_patch_fw(struct phy_device *phydev,
 961                             const struct firmware *fw)
 962 {
 963         int i, ret;
 964
 965         ret = vsc8584_micro_assert_reset(phydev);
 966         if (ret) {
 967                 dev_err(&phydev->mdio.dev,
 968                         "%s: failed to assert reset of micro\n", __func__);
 969                 return ret;
 970         }
 971
 972         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
 973                        MSCC_PHY_PAGE_EXTENDED_GPIO);
 974
 975         /* Hold 8051 Micro in SW Reset, Enable auto incr address and patch clock
 976          * Disable the 8051 Micro clock
 977          */
 978         phy_base_write(phydev, MSCC_DW8051_CNTL_STATUS, RUN_FROM_INT_ROM |
 979                        AUTOINC_ADDR | PATCH_RAM_CLK | MICRO_CLK_EN |
 980                        MICRO_CLK_DIVIDE(2));
 981         phy_base_write(phydev, MSCC_INT_MEM_CNTL, READ_PRAM | INT_MEM_WRITE_EN |
 982                        INT_MEM_DATA(2));
 983         phy_base_write(phydev, MSCC_INT_MEM_ADDR, 0x0000);
 984
 985         for (i = 0; i < fw->size; i++)
 986                 phy_base_write(phydev, MSCC_INT_MEM_CNTL, READ_PRAM |
 987                                INT_MEM_WRITE_EN | fw->data[i]);
 988
 989         /* Clear internal memory access */
 990         phy_base_write(phydev, MSCC_INT_MEM_CNTL, READ_RAM);
 991
 992         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
 993
 994         return 0;
 995 }
 996
 997 /* bus->mdio_lock should be locked when using this function */
 998 static bool vsc8574_is_serdes_init(struct phy_device *phydev)
 999 {
1000         u16 reg;
1001         bool ret;
1002
1003         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
1004                        MSCC_PHY_PAGE_EXTENDED_GPIO);
1005
1006         reg = phy_base_read(phydev, MSCC_TRAP_ROM_ADDR(1));
1007         if (reg != 0x3eb7) {
1008                 ret = false;
1009                 goto out;
1010         }
1011
1012         reg = phy_base_read(phydev, MSCC_PATCH_RAM_ADDR(1));
1013         if (reg != 0x4012) {
1014                 ret = false;
1015                 goto out;
1016         }
1017
1018         reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL);
1019         if (reg != EN_PATCH_RAM_TRAP_ADDR(1)) {
1020                 ret = false;
1021                 goto out;
1022         }
1023
1024         reg = phy_base_read(phydev, MSCC_DW8051_CNTL_STATUS);
1025         if ((MICRO_NSOFT_RESET | RUN_FROM_INT_ROM |  DW8051_CLK_EN |
1026              MICRO_CLK_EN) != (reg & MSCC_DW8051_VLD_MASK)) {
1027                 ret = false;
1028                 goto out;
1029         }
1030
1031         ret = true;
1032 out:
1033         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
1034
1035         return ret;
1036 }
1037
1038 /* bus->mdio_lock should be locked when using this function */
1039 static int vsc8574_config_pre_init(struct phy_device *phydev)
1040 {
1041         static const struct reg_val pre_init1[] = {
1042                 {0x0fae, 0x000401bd},
1043                 {0x0fac, 0x000f000f},
1044                 {0x17a0, 0x00a0f147},
1045                 {0x0fe4, 0x00052f54},
1046                 {0x1792, 0x0027303d},
1047                 {0x07fe, 0x00000704},
1048                 {0x0fe0, 0x00060150},
1049                 {0x0f82, 0x0012b00a},
1050                 {0x0f80, 0x00000d74},
1051                 {0x02e0, 0x00000012},
1052                 {0x03a2, 0x00050208},
1053                 {0x03b2, 0x00009186},
1054                 {0x0fb0, 0x000e3700},
1055                 {0x1688, 0x00049f81},
1056                 {0x0fd2, 0x0000ffff},
1057                 {0x168a, 0x00039fa2},
1058                 {0x1690, 0x0020640b},
1059                 {0x0258, 0x00002220},
1060                 {0x025a, 0x00002a20},
1061                 {0x025c, 0x00003060},
1062                 {0x025e, 0x00003fa0},
1063                 {0x03a6, 0x0000e0f0},
1064                 {0x0f92, 0x00001489},
1065                 {0x16a2, 0x00007000},
1066                 {0x16a6, 0x00071448},
1067                 {0x16a0, 0x00eeffdd},
1068                 {0x0fe8, 0x0091b06c},
1069                 {0x0fea, 0x00041600},
1070                 {0x16b0, 0x00eeff00},
1071                 {0x16b2, 0x00007000},
1072                 {0x16b4, 0x00000814},
1073                 {0x0f90, 0x00688980},
1074                 {0x03a4, 0x0000d8f0},
1075                 {0x0fc0, 0x00000400},
1076                 {0x07fa, 0x0050100f},
1077                 {0x0796, 0x00000003},
1078                 {0x07f8, 0x00c3ff98},
1079                 {0x0fa4, 0x0018292a},
1080                 {0x168c, 0x00d2c46f},
1081                 {0x17a2, 0x00000620},
1082                 {0x16a4, 0x0013132f},
1083                 {0x16a8, 0x00000000},
1084                 {0x0ffc, 0x00c0a028},
1085                 {0x0fec, 0x00901c09},
1086                 {0x0fee, 0x0004a6a1},
1087                 {0x0ffe, 0x00b01807},
1088         };
1089         static const struct reg_val pre_init2[] = {
1090                 {0x0486, 0x0008a518},
1091                 {0x0488, 0x006dc696},
1092                 {0x048a, 0x00000912},
1093                 {0x048e, 0x00000db6},
1094                 {0x049c, 0x00596596},
1095                 {0x049e, 0x00000514},
1096                 {0x04a2, 0x00410280},
1097                 {0x04a4, 0x00000000},
1098                 {0x04a6, 0x00000000},
1099                 {0x04a8, 0x00000000},
1100                 {0x04aa, 0x00000000},
1101                 {0x04ae, 0x007df7dd},
1102                 {0x04b0, 0x006d95d4},
1103                 {0x04b2, 0x00492410},
1104         };
1105         struct device *dev = &phydev->mdio.dev;
1106         const struct firmware *fw;
1107         unsigned int i;
1108         u16 crc, reg;
1109         bool serdes_init;
1110         int ret;
1111
1112         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
1113
1114         /* all writes below are broadcasted to all PHYs in the same package */
1115         reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS);
1116         reg |= SMI_BROADCAST_WR_EN;
1117         phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg);
1118
1119         phy_base_write(phydev, MII_VSC85XX_INT_MASK, 0);
1120
1121         /* The below register writes are tweaking analog and electrical
1122          * configuration that were determined through characterization by PHY
1123          * engineers. These don't mean anything more than "these are the best
1124          * values".
1125          */
1126         phy_base_write(phydev, MSCC_PHY_EXT_PHY_CNTL_2, 0x0040);
1127
1128         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST);
1129
1130         phy_base_write(phydev, MSCC_PHY_TEST_PAGE_20, 0x4320);
1131         phy_base_write(phydev, MSCC_PHY_TEST_PAGE_24, 0x0c00);
1132         phy_base_write(phydev, MSCC_PHY_TEST_PAGE_9, 0x18ca);
1133         phy_base_write(phydev, MSCC_PHY_TEST_PAGE_5, 0x1b20);
1134
1135         reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8);
1136         reg |= TR_CLK_DISABLE;
1137         phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg);
1138
1139         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TR);
1140
1141         for (i = 0; i < ARRAY_SIZE(pre_init1); i++)
1142                 vsc8584_csr_write(phydev, pre_init1[i].reg, pre_init1[i].val);
1143
1144         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_2);
1145
1146         phy_base_write(phydev, MSCC_PHY_CU_PMD_TX_CNTL, 0x028e);
1147
1148         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TR);
1149
1150         for (i = 0; i < ARRAY_SIZE(pre_init2); i++)
1151                 vsc8584_csr_write(phydev, pre_init2[i].reg, pre_init2[i].val);
1152
1153         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST);
1154
1155         reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8);
1156         reg &= ~TR_CLK_DISABLE;
1157         phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg);
1158
1159         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
1160
1161         /* end of write broadcasting */
1162         reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS);
1163         reg &= ~SMI_BROADCAST_WR_EN;
1164         phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg);
1165
1166         ret = request_firmware(&fw, MSCC_VSC8574_REVB_INT8051_FW, dev);
1167         if (ret) {
1168                 dev_err(dev, "failed to load firmware %s, ret: %d\n",
1169                         MSCC_VSC8574_REVB_INT8051_FW, ret);
1170                 return ret;
1171         }
1172
1173         /* Add one byte to size for the one added by the patch_fw function */
1174         ret = vsc8584_get_fw_crc(phydev,
1175                                  MSCC_VSC8574_REVB_INT8051_FW_START_ADDR,
1176                                  fw->size + 1, &crc);
1177         if (ret)
1178                 goto out;
1179
1180         if (crc == MSCC_VSC8574_REVB_INT8051_FW_CRC) {
1181                 serdes_init = vsc8574_is_serdes_init(phydev);
1182
1183                 if (!serdes_init) {
1184                         ret = vsc8584_micro_assert_reset(phydev);
1185                         if (ret) {
1186                                 dev_err(dev,
1187                                         "%s: failed to assert reset of micro\n",
1188                                         __func__);
1189                                 goto out;
1190                         }
1191                 }
1192         } else {
1193                 dev_dbg(dev, "FW CRC is not the expected one, patching FW\n");
1194
1195                 serdes_init = false;
1196
1197                 if (vsc8584_patch_fw(phydev, fw))
1198                         dev_warn(dev,
1199                                  "failed to patch FW, expect non-optimal device\n");
1200         }
1201
1202         if (!serdes_init) {
1203                 phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
1204                                MSCC_PHY_PAGE_EXTENDED_GPIO);
1205
1206                 phy_base_write(phydev, MSCC_TRAP_ROM_ADDR(1), 0x3eb7);
1207                 phy_base_write(phydev, MSCC_PATCH_RAM_ADDR(1), 0x4012);
1208                 phy_base_write(phydev, MSCC_INT_MEM_CNTL,
1209                                EN_PATCH_RAM_TRAP_ADDR(1));
1210
1211                 vsc8584_micro_deassert_reset(phydev, false);
1212
1213                 /* Add one byte to size for the one added by the patch_fw
1214                  * function
1215                  */
1216                 ret = vsc8584_get_fw_crc(phydev,
1217                                          MSCC_VSC8574_REVB_INT8051_FW_START_ADDR,
1218                                          fw->size + 1, &crc);
1219                 if (ret)
1220                         goto out;
1221
1222                 if (crc != MSCC_VSC8574_REVB_INT8051_FW_CRC)
1223                         dev_warn(dev,
1224                                  "FW CRC after patching is not the expected one, expect non-optimal device\n");
1225         }
1226
1227         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
1228                        MSCC_PHY_PAGE_EXTENDED_GPIO);
1229
1230         ret = vsc8584_cmd(phydev, PROC_CMD_1588_DEFAULT_INIT |
1231                           PROC_CMD_PHY_INIT);
1232
1233 out:
1234         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
1235
1236         release_firmware(fw);
1237
1238         return ret;
1239 }
1240
1241 /* Access LCPLL Cfg_2 */
1242 static void vsc8584_pll5g_cfg2_wr(struct phy_device *phydev,
1243                                   bool disable_fsm)
1244 {
1245         u32 rd_dat;
1246
1247         rd_dat = vsc85xx_csr_read(phydev, MACRO_CTRL, PHY_S6G_PLL5G_CFG2);
1248         rd_dat &= ~BIT(PHY_S6G_CFG2_FSM_DIS);
1249         rd_dat |= (disable_fsm << PHY_S6G_CFG2_FSM_DIS);
1250         vsc85xx_csr_write(phydev, MACRO_CTRL, PHY_S6G_PLL5G_CFG2, rd_dat);
1251 }
1252
1253 /* trigger a read to the spcified MCB */
1254 static int vsc8584_mcb_rd_trig(struct phy_device *phydev,
1255                                u32 mcb_reg_addr, u8 mcb_slave_num)
1256 {
1257         u32 rd_dat = 0;
1258
1259         /* read MCB */
1260         vsc85xx_csr_write(phydev, MACRO_CTRL, mcb_reg_addr,
1261                           (0x40000000 | (1L << mcb_slave_num)));
1262
1263         return read_poll_timeout(vsc85xx_csr_read, rd_dat,
1264                                  !(rd_dat & 0x40000000),
1265                                  4000, 200000, 0,
1266                                  phydev, MACRO_CTRL, mcb_reg_addr);
1267 }
1268
1269 /* trigger a write to the spcified MCB */
1270 static int vsc8584_mcb_wr_trig(struct phy_device *phydev,
1271                                u32 mcb_reg_addr,
1272                                u8 mcb_slave_num)
1273 {
1274         u32 rd_dat = 0;
1275
1276         /* write back MCB */
1277         vsc85xx_csr_write(phydev, MACRO_CTRL, mcb_reg_addr,
1278                           (0x80000000 | (1L << mcb_slave_num)));
1279
1280         return read_poll_timeout(vsc85xx_csr_read, rd_dat,
1281                                  !(rd_dat & 0x80000000),
1282                                  4000, 200000, 0,
1283                                  phydev, MACRO_CTRL, mcb_reg_addr);
1284 }
1285
1286 /* Sequence to Reset LCPLL for the VIPER and ELISE PHY */
1287 static int vsc8584_pll5g_reset(struct phy_device *phydev)
1288 {
1289         bool dis_fsm;
1290         int ret = 0;
1291
1292         ret = vsc8584_mcb_rd_trig(phydev, 0x11, 0);
1293         if (ret < 0)
1294                 goto done;
1295         dis_fsm = 1;
1296
1297         /* Reset LCPLL */
1298         vsc8584_pll5g_cfg2_wr(phydev, dis_fsm);
1299
1300         /* write back LCPLL MCB */
1301         ret = vsc8584_mcb_wr_trig(phydev, 0x11, 0);
1302         if (ret < 0)
1303                 goto done;
1304
1305         /* 10 mSec sleep while LCPLL is hold in reset */
1306         usleep_range(10000, 20000);
1307
1308         /* read LCPLL MCB into CSRs */
1309         ret = vsc8584_mcb_rd_trig(phydev, 0x11, 0);
1310         if (ret < 0)
1311                 goto done;
1312         dis_fsm = 0;
1313
1314         /* Release the Reset of LCPLL */
1315         vsc8584_pll5g_cfg2_wr(phydev, dis_fsm);
1316
1317         /* write back LCPLL MCB */
1318         ret = vsc8584_mcb_wr_trig(phydev, 0x11, 0);
1319         if (ret < 0)
1320                 goto done;
1321
1322         usleep_range(110000, 200000);
1323 done:
1324         return ret;
1325 }
1326
1327 /* bus->mdio_lock should be locked when using this function */
1328 static int vsc8584_config_pre_init(struct phy_device *phydev)
1329 {
1330         static const struct reg_val pre_init1[] = {
1331                 {0x07fa, 0x0050100f},
1332                 {0x1688, 0x00049f81},
1333                 {0x0f90, 0x00688980},
1334                 {0x03a4, 0x0000d8f0},
1335                 {0x0fc0, 0x00000400},
1336                 {0x0f82, 0x0012b002},
1337                 {0x1686, 0x00000004},
1338                 {0x168c, 0x00d2c46f},
1339                 {0x17a2, 0x00000620},
1340                 {0x16a0, 0x00eeffdd},
1341                 {0x16a6, 0x00071448},
1342                 {0x16a4, 0x0013132f},
1343                 {0x16a8, 0x00000000},
1344                 {0x0ffc, 0x00c0a028},
1345                 {0x0fe8, 0x0091b06c},
1346                 {0x0fea, 0x00041600},
1347                 {0x0f80, 0x00fffaff},
1348                 {0x0fec, 0x00901809},
1349                 {0x0ffe, 0x00b01007},
1350                 {0x16b0, 0x00eeff00},
1351                 {0x16b2, 0x00007000},
1352                 {0x16b4, 0x00000814},
1353         };
1354         static const struct reg_val pre_init2[] = {
1355                 {0x0486, 0x0008a518},
1356                 {0x0488, 0x006dc696},
1357                 {0x048a, 0x00000912},
1358         };
1359         const struct firmware *fw;
1360         struct device *dev = &phydev->mdio.dev;
1361         unsigned int i;
1362         u16 crc, reg;
1363         int ret;
1364
1365         ret = vsc8584_pll5g_reset(phydev);
1366         if (ret < 0) {
1367                 dev_err(dev, "failed LCPLL reset, ret: %d\n", ret);
1368                 return ret;
1369         }
1370
1371         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
1372
1373         /* all writes below are broadcasted to all PHYs in the same package */
1374         reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS);
1375         reg |= SMI_BROADCAST_WR_EN;
1376         phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg);
1377
1378         phy_base_write(phydev, MII_VSC85XX_INT_MASK, 0);
1379
1380         reg = phy_base_read(phydev,  MSCC_PHY_BYPASS_CONTROL);
1381         reg |= PARALLEL_DET_IGNORE_ADVERTISED;
1382         phy_base_write(phydev, MSCC_PHY_BYPASS_CONTROL, reg);
1383
1384         /* The below register writes are tweaking analog and electrical
1385          * configuration that were determined through characterization by PHY
1386          * engineers. These don't mean anything more than "these are the best
1387          * values".
1388          */
1389         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_3);
1390
1391         phy_base_write(phydev, MSCC_PHY_SERDES_TX_CRC_ERR_CNT, 0x2000);
1392
1393         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST);
1394
1395         phy_base_write(phydev, MSCC_PHY_TEST_PAGE_5, 0x1f20);
1396
1397         reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8);
1398         reg |= TR_CLK_DISABLE;
1399         phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg);
1400
1401         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TR);
1402
1403         phy_base_write(phydev, MSCC_PHY_TR_CNTL, TR_WRITE | TR_ADDR(0x2fa4));
1404
1405         reg = phy_base_read(phydev, MSCC_PHY_TR_MSB);
1406         reg &= ~0x007f;
1407         reg |= 0x0019;
1408         phy_base_write(phydev, MSCC_PHY_TR_MSB, reg);
1409
1410         phy_base_write(phydev, MSCC_PHY_TR_CNTL, TR_WRITE | TR_ADDR(0x0fa4));
1411
1412         for (i = 0; i < ARRAY_SIZE(pre_init1); i++)
1413                 vsc8584_csr_write(phydev, pre_init1[i].reg, pre_init1[i].val);
1414
1415         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_2);
1416
1417         phy_base_write(phydev, MSCC_PHY_CU_PMD_TX_CNTL, 0x028e);
1418
1419         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TR);
1420
1421         for (i = 0; i < ARRAY_SIZE(pre_init2); i++)
1422                 vsc8584_csr_write(phydev, pre_init2[i].reg, pre_init2[i].val);
1423
1424         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST);
1425
1426         reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8);
1427         reg &= ~TR_CLK_DISABLE;
1428         phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg);
1429
1430         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
1431
1432         /* end of write broadcasting */
1433         reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS);
1434         reg &= ~SMI_BROADCAST_WR_EN;
1435         phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg);
1436
1437         ret = request_firmware(&fw, MSCC_VSC8584_REVB_INT8051_FW, dev);
1438         if (ret) {
1439                 dev_err(dev, "failed to load firmware %s, ret: %d\n",
1440                         MSCC_VSC8584_REVB_INT8051_FW, ret);
1441                 return ret;
1442         }
1443
1444         /* Add one byte to size for the one added by the patch_fw function */
1445         ret = vsc8584_get_fw_crc(phydev,
1446                                  MSCC_VSC8584_REVB_INT8051_FW_START_ADDR,
1447                                  fw->size + 1, &crc);
1448         if (ret)
1449                 goto out;
1450
1451         if (crc != MSCC_VSC8584_REVB_INT8051_FW_CRC) {
1452                 dev_dbg(dev, "FW CRC is not the expected one, patching FW\n");
1453                 if (vsc8584_patch_fw(phydev, fw))
1454                         dev_warn(dev,
1455                                  "failed to patch FW, expect non-optimal device\n");
1456         }
1457
1458         vsc8584_micro_deassert_reset(phydev, false);
1459
1460         /* Add one byte to size for the one added by the patch_fw function */
1461         ret = vsc8584_get_fw_crc(phydev,
1462                                  MSCC_VSC8584_REVB_INT8051_FW_START_ADDR,
1463                                  fw->size + 1, &crc);
1464         if (ret)
1465                 goto out;
1466
1467         if (crc != MSCC_VSC8584_REVB_INT8051_FW_CRC)
1468                 dev_warn(dev,
1469                          "FW CRC after patching is not the expected one, expect non-optimal device\n");
1470
1471         ret = vsc8584_micro_assert_reset(phydev);
1472         if (ret)
1473                 goto out;
1474
1475         /* Write patch vector 0, to skip IB cal polling  */
1476         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_GPIO);
1477         reg = MSCC_ROM_TRAP_SERDES_6G_CFG; /* ROM address to trap, for patch vector 0 */
1478         ret = phy_base_write(phydev, MSCC_TRAP_ROM_ADDR(1), reg);
1479         if (ret)
1480                 goto out;
1481
1482         reg = MSCC_RAM_TRAP_SERDES_6G_CFG; /* RAM address to jump to, when patch vector 0 enabled */
1483         ret = phy_base_write(phydev, MSCC_PATCH_RAM_ADDR(1), reg);
1484         if (ret)
1485                 goto out;
1486
1487         reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL);
1488         reg |= PATCH_VEC_ZERO_EN; /* bit 8, enable patch vector 0 */
1489         ret = phy_base_write(phydev, MSCC_INT_MEM_CNTL, reg);
1490         if (ret)
1491                 goto out;
1492
1493         vsc8584_micro_deassert_reset(phydev, true);
1494
1495 out:
1496         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
1497
1498         release_firmware(fw);
1499
1500         return ret;
1501 }
1502
1503 static void vsc8584_get_base_addr(struct phy_device *phydev)
1504 {
1505         struct vsc8531_private *vsc8531 = phydev->priv;
1506         u16 val, addr;
1507
1508         phy_lock_mdio_bus(phydev);
1509         __phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED);
1510
1511         addr = __phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_4);
1512         addr >>= PHY_CNTL_4_ADDR_POS;
1513
1514         val = __phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL);
1515
1516         __phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
1517         phy_unlock_mdio_bus(phydev);
1518
1519         /* In the package, there are two pairs of PHYs (PHY0 + PHY2 and
1520          * PHY1 + PHY3). The first PHY of each pair (PHY0 and PHY1) is
1521          * the base PHY for timestamping operations.
1522          */
1523         vsc8531->ts_base_addr = phydev->mdio.addr;
1524         vsc8531->ts_base_phy = addr;
1525
1526         if (val & PHY_ADDR_REVERSED) {
1527                 vsc8531->base_addr = phydev->mdio.addr + addr;
1528                 if (addr > 1) {
1529                         vsc8531->ts_base_addr += 2;
1530                         vsc8531->ts_base_phy += 2;
1531                 }
1532         } else {
1533                 vsc8531->base_addr = phydev->mdio.addr - addr;
1534                 if (addr > 1) {
1535                         vsc8531->ts_base_addr -= 2;
1536                         vsc8531->ts_base_phy -= 2;
1537                 }
1538         }
1539
1540         vsc8531->addr = addr;
1541 }
1542
1543 static void vsc85xx_coma_mode_release(struct phy_device *phydev)
1544 {
1545         /* The coma mode (pin or reg) provides an optional feature that
1546          * may be used to control when the PHYs become active.
1547          * Alternatively the COMA_MODE pin may be connected low
1548          * so that the PHYs are fully active once out of reset.
1549          */
1550
1551         /* Enable output (mode=0) and write zero to it */
1552         vsc85xx_phy_write_page(phydev, MSCC_PHY_PAGE_EXTENDED_GPIO);
1553         __phy_modify(phydev, MSCC_PHY_GPIO_CONTROL_2,
1554                      MSCC_PHY_COMA_MODE | MSCC_PHY_COMA_OUTPUT, 0);
1555         vsc85xx_phy_write_page(phydev, MSCC_PHY_PAGE_STANDARD);
1556 }
1557
1558 static int vsc8584_config_host_serdes(struct phy_device *phydev)
1559 {
1560         struct vsc8531_private *vsc8531 = phydev->priv;
1561         int ret;
1562         u16 val;
1563
1564         ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
1565                              MSCC_PHY_PAGE_EXTENDED_GPIO);
1566         if (ret)
1567                 return ret;
1568
1569         val = phy_base_read(phydev, MSCC_PHY_MAC_CFG_FASTLINK);
1570         val &= ~MAC_CFG_MASK;
1571         if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
1572                 val |= MAC_CFG_QSGMII;
1573         } else if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
1574                 val |= MAC_CFG_SGMII;
1575         } else {
1576                 ret = -EINVAL;
1577                 return ret;
1578         }
1579
1580         ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val);
1581         if (ret)
1582                 return ret;
1583
1584         ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
1585                              MSCC_PHY_PAGE_STANDARD);
1586         if (ret)
1587                 return ret;
1588
1589         val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT |
1590                 PROC_CMD_READ_MOD_WRITE_PORT;
1591         if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
1592                 val |= PROC_CMD_QSGMII_MAC;
1593         else
1594                 val |= PROC_CMD_SGMII_MAC;
1595
1596         ret = vsc8584_cmd(phydev, val);
1597         if (ret)
1598                 return ret;
1599
1600         usleep_range(10000, 20000);
1601
1602         /* Disable SerDes for 100Base-FX */
1603         ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF |
1604                           PROC_CMD_FIBER_PORT(vsc8531->addr) |
1605                           PROC_CMD_FIBER_DISABLE |
1606                           PROC_CMD_READ_MOD_WRITE_PORT |
1607                           PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_100BASE_FX);
1608         if (ret)
1609                 return ret;
1610
1611         /* Disable SerDes for 1000Base-X */
1612         ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF |
1613                           PROC_CMD_FIBER_PORT(vsc8531->addr) |
1614                           PROC_CMD_FIBER_DISABLE |
1615                           PROC_CMD_READ_MOD_WRITE_PORT |
1616                           PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_1000BASE_X);
1617         if (ret)
1618                 return ret;
1619
1620         return vsc85xx_sd6g_config_v2(phydev);
1621 }
1622
1623 static int vsc8574_config_host_serdes(struct phy_device *phydev)
1624 {
1625         struct vsc8531_private *vsc8531 = phydev->priv;
1626         int ret;
1627         u16 val;
1628
1629         ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
1630                              MSCC_PHY_PAGE_EXTENDED_GPIO);
1631         if (ret)
1632                 return ret;
1633
1634         val = phy_base_read(phydev, MSCC_PHY_MAC_CFG_FASTLINK);
1635         val &= ~MAC_CFG_MASK;
1636         if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
1637                 val |= MAC_CFG_QSGMII;
1638         } else if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
1639                 val |= MAC_CFG_SGMII;
1640         } else if (phy_interface_is_rgmii(phydev)) {
1641                 val |= MAC_CFG_RGMII;
1642         } else {
1643                 ret = -EINVAL;
1644                 return ret;
1645         }
1646
1647         ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val);
1648         if (ret)
1649                 return ret;
1650
1651         ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
1652                              MSCC_PHY_PAGE_STANDARD);
1653         if (ret)
1654                 return ret;
1655
1656         if (!phy_interface_is_rgmii(phydev)) {
1657                 val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT |
1658                         PROC_CMD_READ_MOD_WRITE_PORT;
1659                 if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
1660                         val |= PROC_CMD_QSGMII_MAC;
1661                 else
1662                         val |= PROC_CMD_SGMII_MAC;
1663
1664                 ret = vsc8584_cmd(phydev, val);
1665                 if (ret)
1666                         return ret;
1667
1668                 usleep_range(10000, 20000);
1669         }
1670
1671         /* Disable SerDes for 100Base-FX */
1672         ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF |
1673                           PROC_CMD_FIBER_PORT(vsc8531->addr) |
1674                           PROC_CMD_FIBER_DISABLE |
1675                           PROC_CMD_READ_MOD_WRITE_PORT |
1676                           PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_100BASE_FX);
1677         if (ret)
1678                 return ret;
1679
1680         /* Disable SerDes for 1000Base-X */
1681         return vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF |
1682                            PROC_CMD_FIBER_PORT(vsc8531->addr) |
1683                            PROC_CMD_FIBER_DISABLE |
1684                            PROC_CMD_READ_MOD_WRITE_PORT |
1685                            PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_1000BASE_X);
1686 }
1687
1688 static int vsc8584_config_init(struct phy_device *phydev)
1689 {
1690         struct vsc8531_private *vsc8531 = phydev->priv;
1691         int ret, i;
1692         u16 val;
1693
1694         phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
1695
1696         phy_lock_mdio_bus(phydev);
1697
1698         /* Some parts of the init sequence are identical for every PHY in the
1699          * package. Some parts are modifying the GPIO register bank which is a
1700          * set of registers that are affecting all PHYs, a few resetting the
1701          * microprocessor common to all PHYs. The CRC check responsible of the
1702          * checking the firmware within the 8051 microprocessor can only be
1703          * accessed via the PHY whose internal address in the package is 0.
1704          * All PHYs' interrupts mask register has to be zeroed before enabling
1705          * any PHY's interrupt in this register.
1706          * For all these reasons, we need to do the init sequence once and only
1707          * once whatever is the first PHY in the package that is initialized and
1708          * do the correct init sequence for all PHYs that are package-critical
1709          * in this pre-init function.
1710          */
1711         if (phy_package_init_once(phydev)) {
1712                 /* The following switch statement assumes that the lowest
1713                  * nibble of the phy_id_mask is always 0. This works because
1714                  * the lowest nibble of the PHY_ID's below are also 0.
1715                  */
1716                 WARN_ON(phydev->drv->phy_id_mask & 0xf);
1717
1718                 switch (phydev->phy_id & phydev->drv->phy_id_mask) {
1719                 case PHY_ID_VSC8504:
1720                 case PHY_ID_VSC8552:
1721                 case PHY_ID_VSC8572:
1722                 case PHY_ID_VSC8574:
1723                         ret = vsc8574_config_pre_init(phydev);
1724                         if (ret)
1725                                 goto err;
1726                         ret = vsc8574_config_host_serdes(phydev);
1727                         if (ret)
1728                                 goto err;
1729                         break;
1730                 case PHY_ID_VSC856X:
1731                 case PHY_ID_VSC8575:
1732                 case PHY_ID_VSC8582:
1733                 case PHY_ID_VSC8584:
1734                         ret = vsc8584_config_pre_init(phydev);
1735                         if (ret)
1736                                 goto err;
1737                         ret = vsc8584_config_host_serdes(phydev);
1738                         if (ret)
1739                                 goto err;
1740                         vsc85xx_coma_mode_release(phydev);
1741                         break;
1742                 default:
1743                         ret = -EINVAL;
1744                         break;
1745                 }
1746
1747                 if (ret)
1748                         goto err;
1749         }
1750
1751         phy_unlock_mdio_bus(phydev);
1752
1753         ret = vsc8584_macsec_init(phydev);
1754         if (ret)
1755                 return ret;
1756
1757         ret = vsc8584_ptp_init(phydev);
1758         if (ret)
1759                 return ret;
1760
1761         val = phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_1);
1762         val &= ~(MEDIA_OP_MODE_MASK | VSC8584_MAC_IF_SELECTION_MASK);
1763         val |= (MEDIA_OP_MODE_COPPER << MEDIA_OP_MODE_POS) |
1764                (VSC8584_MAC_IF_SELECTION_SGMII << VSC8584_MAC_IF_SELECTION_POS);
1765         ret = phy_write(phydev, MSCC_PHY_EXT_PHY_CNTL_1, val);
1766         if (ret)
1767                 return ret;
1768
1769         if (phy_interface_is_rgmii(phydev)) {
1770                 ret = vsc85xx_rgmii_set_skews(phydev, VSC8572_RGMII_CNTL,
1771                                               VSC8572_RGMII_RX_DELAY_MASK,
1772                                               VSC8572_RGMII_TX_DELAY_MASK);
1773                 if (ret)
1774                         return ret;
1775         }
1776
1777         ret = genphy_soft_reset(phydev);
1778         if (ret)
1779                 return ret;
1780
1781         for (i = 0; i < vsc8531->nleds; i++) {
1782                 ret = vsc85xx_led_cntl_set(phydev, i, vsc8531->leds_mode[i]);
1783                 if (ret)
1784                         return ret;
1785         }
1786
1787         return 0;
1788
1789 err:
1790         phy_unlock_mdio_bus(phydev);
1791         return ret;
1792 }
1793
1794 static irqreturn_t vsc8584_handle_interrupt(struct phy_device *phydev)
1795 {
1796         irqreturn_t ret;
1797         int irq_status;
1798
1799         irq_status = phy_read(phydev, MII_VSC85XX_INT_STATUS);
1800         if (irq_status < 0)
1801                 return IRQ_NONE;
1802
1803         /* Timestamping IRQ does not set a bit in the global INT_STATUS, so
1804          * irq_status would be 0.
1805          */
1806         ret = vsc8584_handle_ts_interrupt(phydev);
1807         if (!(irq_status & MII_VSC85XX_INT_MASK_MASK))
1808                 return ret;
1809
1810         if (irq_status & MII_VSC85XX_INT_MASK_EXT)
1811                 vsc8584_handle_macsec_interrupt(phydev);
1812
1813         if (irq_status & MII_VSC85XX_INT_MASK_LINK_CHG)
1814                 phy_trigger_machine(phydev);
1815
1816         return IRQ_HANDLED;
1817 }
1818
1819 static int vsc85xx_config_init(struct phy_device *phydev)
1820 {
1821         int rc, i, phy_id;
1822         struct vsc8531_private *vsc8531 = phydev->priv;
1823
1824         rc = vsc85xx_default_config(phydev);
1825         if (rc)
1826                 return rc;
1827
1828         rc = vsc85xx_mac_if_set(phydev, phydev->interface);
1829         if (rc)
1830                 return rc;
1831
1832         rc = vsc85xx_edge_rate_cntl_set(phydev, vsc8531->rate_magic);
1833         if (rc)
1834                 return rc;
1835
1836         phy_id = phydev->drv->phy_id & phydev->drv->phy_id_mask;
1837         if (PHY_ID_VSC8531 == phy_id || PHY_ID_VSC8541 == phy_id ||
1838             PHY_ID_VSC8530 == phy_id || PHY_ID_VSC8540 == phy_id) {
1839                 rc = vsc8531_pre_init_seq_set(phydev);
1840                 if (rc)
1841                         return rc;
1842         }
1843
1844         rc = vsc85xx_eee_init_seq_set(phydev);
1845         if (rc)
1846                 return rc;
1847
1848         for (i = 0; i < vsc8531->nleds; i++) {
1849                 rc = vsc85xx_led_cntl_set(phydev, i, vsc8531->leds_mode[i]);
1850                 if (rc)
1851                         return rc;
1852         }
1853
1854         return 0;
1855 }
1856
1857 static int __phy_write_mcb_s6g(struct phy_device *phydev, u32 reg, u8 mcb,
1858                                u32 op)
1859 {
1860         unsigned long deadline;
1861         u32 val;
1862         int ret;
1863
1864         ret = vsc85xx_csr_write(phydev, PHY_MCB_TARGET, reg,
1865                                 op | (1 << mcb));
1866         if (ret)
1867                 return -EINVAL;
1868
1869         deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS);
1870         do {
1871                 usleep_range(500, 1000);
1872                 val = vsc85xx_csr_read(phydev, PHY_MCB_TARGET, reg);
1873
1874                 if (val == 0xffffffff)
1875                         return -EIO;
1876
1877         } while (time_before(jiffies, deadline) && (val & op));
1878
1879         if (val & op)
1880                 return -ETIMEDOUT;
1881
1882         return 0;
1883 }
1884
1885 /* Trigger a read to the specified MCB */
1886 int phy_update_mcb_s6g(struct phy_device *phydev, u32 reg, u8 mcb)
1887 {
1888         return __phy_write_mcb_s6g(phydev, reg, mcb, PHY_MCB_S6G_READ);
1889 }
1890
1891 /* Trigger a write to the specified MCB */
1892 int phy_commit_mcb_s6g(struct phy_device *phydev, u32 reg, u8 mcb)
1893 {
1894         return __phy_write_mcb_s6g(phydev, reg, mcb, PHY_MCB_S6G_WRITE);
1895 }
1896
1897 static int vsc8514_config_host_serdes(struct phy_device *phydev)
1898 {
1899         int ret;
1900         u16 val;
1901
1902         ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
1903                              MSCC_PHY_PAGE_EXTENDED_GPIO);
1904         if (ret)
1905                 return ret;
1906
1907         val = phy_base_read(phydev, MSCC_PHY_MAC_CFG_FASTLINK);
1908         val &= ~MAC_CFG_MASK;
1909         val |= MAC_CFG_QSGMII;
1910         ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val);
1911         if (ret)
1912                 return ret;
1913
1914         ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
1915                              MSCC_PHY_PAGE_STANDARD);
1916         if (ret)
1917                 return ret;
1918
1919         ret = vsc8584_cmd(phydev, PROC_CMD_NOP);
1920         if (ret)
1921                 return ret;
1922
1923         ret = vsc8584_cmd(phydev,
1924                           PROC_CMD_MCB_ACCESS_MAC_CONF |
1925                           PROC_CMD_RST_CONF_PORT |
1926                           PROC_CMD_READ_MOD_WRITE_PORT | PROC_CMD_QSGMII_MAC);
1927         if (ret) {
1928                 dev_err(&phydev->mdio.dev, "%s: QSGMII error: %d\n",
1929                         __func__, ret);
1930                 return ret;
1931         }
1932
1933         /* Apply 6G SerDes FOJI Algorithm
1934          *  Initial condition requirement:
1935          *  1. hold 8051 in reset
1936          *  2. disable patch vector 0, in order to allow IB cal poll during FoJi
1937          *  3. deassert 8051 reset after change patch vector status
1938          *  4. proceed with FoJi (vsc85xx_sd6g_config_v2)
1939          */
1940         vsc8584_micro_assert_reset(phydev);
1941         val = phy_base_read(phydev, MSCC_INT_MEM_CNTL);
1942         /* clear bit 8, to disable patch vector 0 */
1943         val &= ~PATCH_VEC_ZERO_EN;
1944         ret = phy_base_write(phydev, MSCC_INT_MEM_CNTL, val);
1945         /* Enable 8051 clock, don't set patch present, disable PRAM clock override */
1946         vsc8584_micro_deassert_reset(phydev, false);
1947
1948         return vsc85xx_sd6g_config_v2(phydev);
1949 }
1950
1951 static int vsc8514_config_pre_init(struct phy_device *phydev)
1952 {
1953         /* These are the settings to override the silicon default
1954          * values to handle hardware performance of PHY. They
1955          * are set at Power-On state and remain until PHY Reset.
1956          */
1957         static const struct reg_val pre_init1[] = {
1958                 {0x0f90, 0x00688980},
1959                 {0x0786, 0x00000003},
1960                 {0x07fa, 0x0050100f},
1961                 {0x0f82, 0x0012b002},
1962                 {0x1686, 0x00000004},
1963                 {0x168c, 0x00d2c46f},
1964                 {0x17a2, 0x00000620},
1965                 {0x16a0, 0x00eeffdd},
1966                 {0x16a6, 0x00071448},
1967                 {0x16a4, 0x0013132f},
1968                 {0x16a8, 0x00000000},
1969                 {0x0ffc, 0x00c0a028},
1970                 {0x0fe8, 0x0091b06c},
1971                 {0x0fea, 0x00041600},
1972                 {0x0f80, 0x00fffaff},
1973                 {0x0fec, 0x00901809},
1974                 {0x0ffe, 0x00b01007},
1975                 {0x16b0, 0x00eeff00},
1976                 {0x16b2, 0x00007000},
1977                 {0x16b4, 0x00000814},
1978         };
1979         struct device *dev = &phydev->mdio.dev;
1980         unsigned int i;
1981         u16 reg;
1982         int ret;
1983
1984         ret = vsc8584_pll5g_reset(phydev);
1985         if (ret < 0) {
1986                 dev_err(dev, "failed LCPLL reset, ret: %d\n", ret);
1987                 return ret;
1988         }
1989
1990         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
1991
1992         /* all writes below are broadcasted to all PHYs in the same package */
1993         reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS);
1994         reg |= SMI_BROADCAST_WR_EN;
1995         phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg);
1996
1997         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST);
1998
1999         reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8);
2000         reg |= BIT(15);
2001         phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg);
2002
2003         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TR);
2004
2005         for (i = 0; i < ARRAY_SIZE(pre_init1); i++)
2006                 vsc8584_csr_write(phydev, pre_init1[i].reg, pre_init1[i].val);
2007
2008         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_TEST);
2009
2010         reg = phy_base_read(phydev, MSCC_PHY_TEST_PAGE_8);
2011         reg &= ~BIT(15);
2012         phy_base_write(phydev, MSCC_PHY_TEST_PAGE_8, reg);
2013
2014         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
2015
2016         reg = phy_base_read(phydev, MSCC_PHY_EXT_CNTL_STATUS);
2017         reg &= ~SMI_BROADCAST_WR_EN;
2018         phy_base_write(phydev, MSCC_PHY_EXT_CNTL_STATUS, reg);
2019
2020         /* Add pre-patching commands to:
2021          * 1. enable 8051 clock, operate 8051 clock at 125 MHz
2022          * instead of HW default 62.5MHz
2023          * 2. write patch vector 0, to skip IB cal polling executed
2024          * as part of the 0x80E0 ROM command
2025          */
2026         vsc8584_micro_deassert_reset(phydev, false);
2027
2028         vsc8584_micro_assert_reset(phydev);
2029         phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
2030                        MSCC_PHY_PAGE_EXTENDED_GPIO);
2031         /* ROM address to trap, for patch vector 0 */
2032         reg = MSCC_ROM_TRAP_SERDES_6G_CFG;
2033         ret = phy_base_write(phydev, MSCC_TRAP_ROM_ADDR(1), reg);
2034         if (ret)
2035                 goto err;
2036         /* RAM address to jump to, when patch vector 0 enabled */
2037         reg = MSCC_RAM_TRAP_SERDES_6G_CFG;
2038         ret = phy_base_write(phydev, MSCC_PATCH_RAM_ADDR(1), reg);
2039         if (ret)
2040                 goto err;
2041         reg = phy_base_read(phydev, MSCC_INT_MEM_CNTL);
2042         reg |= PATCH_VEC_ZERO_EN; /* bit 8, enable patch vector 0 */
2043         ret = phy_base_write(phydev, MSCC_INT_MEM_CNTL, reg);
2044         if (ret)
2045                 goto err;
2046
2047         /* Enable 8051 clock, don't set patch present
2048          * yet, disable PRAM clock override
2049          */
2050         vsc8584_micro_deassert_reset(phydev, false);
2051         return ret;
2052  err:
2053         /* restore 8051 and bail w error */
2054         vsc8584_micro_deassert_reset(phydev, false);
2055         return ret;
2056 }
2057
2058 static int vsc8514_config_init(struct phy_device *phydev)
2059 {
2060         struct vsc8531_private *vsc8531 = phydev->priv;
2061         int ret, i;
2062
2063         phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
2064
2065         phy_lock_mdio_bus(phydev);
2066
2067         /* Some parts of the init sequence are identical for every PHY in the
2068          * package. Some parts are modifying the GPIO register bank which is a
2069          * set of registers that are affecting all PHYs, a few resetting the
2070          * microprocessor common to all PHYs.
2071          * All PHYs' interrupts mask register has to be zeroed before enabling
2072          * any PHY's interrupt in this register.
2073          * For all these reasons, we need to do the init sequence once and only
2074          * once whatever is the first PHY in the package that is initialized and
2075          * do the correct init sequence for all PHYs that are package-critical
2076          * in this pre-init function.
2077          */
2078         if (phy_package_init_once(phydev)) {
2079                 ret = vsc8514_config_pre_init(phydev);
2080                 if (ret)
2081                         goto err;
2082                 ret = vsc8514_config_host_serdes(phydev);
2083                 if (ret)
2084                         goto err;
2085                 vsc85xx_coma_mode_release(phydev);
2086         }
2087
2088         phy_unlock_mdio_bus(phydev);
2089
2090         ret = phy_modify(phydev, MSCC_PHY_EXT_PHY_CNTL_1, MEDIA_OP_MODE_MASK,
2091                          MEDIA_OP_MODE_COPPER << MEDIA_OP_MODE_POS);
2092
2093         if (ret)
2094                 return ret;
2095
2096         ret = genphy_soft_reset(phydev);
2097
2098         if (ret)
2099                 return ret;
2100
2101         for (i = 0; i < vsc8531->nleds; i++) {
2102                 ret = vsc85xx_led_cntl_set(phydev, i, vsc8531->leds_mode[i]);
2103                 if (ret)
2104                         return ret;
2105         }
2106
2107         return ret;
2108
2109 err:
2110         phy_unlock_mdio_bus(phydev);
2111         return ret;
2112 }
2113
2114 static int vsc85xx_ack_interrupt(struct phy_device *phydev)
2115 {
2116         int rc = 0;
2117
2118         if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
2119                 rc = phy_read(phydev, MII_VSC85XX_INT_STATUS);
2120
2121         return (rc < 0) ? rc : 0;
2122 }
2123
2124 static int vsc85xx_config_intr(struct phy_device *phydev)
2125 {
2126         int rc;
2127
2128         if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
2129                 rc = vsc85xx_ack_interrupt(phydev);
2130                 if (rc)
2131                         return rc;
2132
2133                 vsc8584_config_macsec_intr(phydev);
2134                 vsc8584_config_ts_intr(phydev);
2135
2136                 rc = phy_write(phydev, MII_VSC85XX_INT_MASK,
2137                                MII_VSC85XX_INT_MASK_MASK);
2138         } else {
2139                 rc = phy_write(phydev, MII_VSC85XX_INT_MASK, 0);
2140                 if (rc < 0)
2141                         return rc;
2142                 rc = phy_read(phydev, MII_VSC85XX_INT_STATUS);
2143                 if (rc < 0)
2144                         return rc;
2145
2146                 rc = vsc85xx_ack_interrupt(phydev);
2147         }
2148
2149         return rc;
2150 }
2151
2152 static irqreturn_t vsc85xx_handle_interrupt(struct phy_device *phydev)
2153 {
2154         int irq_status;
2155
2156         irq_status = phy_read(phydev, MII_VSC85XX_INT_STATUS);
2157         if (irq_status < 0) {
2158                 phy_error(phydev);
2159                 return IRQ_NONE;
2160         }
2161
2162         if (!(irq_status & MII_VSC85XX_INT_MASK_MASK))
2163                 return IRQ_NONE;
2164
2165         phy_trigger_machine(phydev);
2166
2167         return IRQ_HANDLED;
2168 }
2169
2170 static int vsc85xx_config_aneg(struct phy_device *phydev)
2171 {
2172         int rc;
2173
2174         rc = vsc85xx_mdix_set(phydev, phydev->mdix_ctrl);
2175         if (rc < 0)
2176                 return rc;
2177
2178         return genphy_config_aneg(phydev);
2179 }
2180
2181 static int vsc85xx_read_status(struct phy_device *phydev)
2182 {
2183         int rc;
2184
2185         rc = vsc85xx_mdix_get(phydev, &phydev->mdix);
2186         if (rc < 0)
2187                 return rc;
2188
2189         return genphy_read_status(phydev);
2190 }
2191
2192 static int vsc8514_probe(struct phy_device *phydev)
2193 {
2194         struct vsc8531_private *vsc8531;
2195         u32 default_mode[4] = {VSC8531_LINK_1000_ACTIVITY,
2196            VSC8531_LINK_100_ACTIVITY, VSC8531_LINK_ACTIVITY,
2197            VSC8531_DUPLEX_COLLISION};
2198
2199         vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL);
2200         if (!vsc8531)
2201                 return -ENOMEM;
2202
2203         phydev->priv = vsc8531;
2204
2205         vsc8584_get_base_addr(phydev);
2206         devm_phy_package_join(&phydev->mdio.dev, phydev,
2207                               vsc8531->base_addr, 0);
2208
2209         vsc8531->nleds = 4;
2210         vsc8531->supp_led_modes = VSC85XX_SUPP_LED_MODES;
2211         vsc8531->hw_stats = vsc85xx_hw_stats;
2212         vsc8531->nstats = ARRAY_SIZE(vsc85xx_hw_stats);
2213         vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats,
2214                                       sizeof(u64), GFP_KERNEL);
2215         if (!vsc8531->stats)
2216                 return -ENOMEM;
2217
2218         return vsc85xx_dt_led_modes_get(phydev, default_mode);
2219 }
2220
2221 static int vsc8574_probe(struct phy_device *phydev)
2222 {
2223         struct vsc8531_private *vsc8531;
2224         u32 default_mode[4] = {VSC8531_LINK_1000_ACTIVITY,
2225            VSC8531_LINK_100_ACTIVITY, VSC8531_LINK_ACTIVITY,
2226            VSC8531_DUPLEX_COLLISION};
2227
2228         vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL);
2229         if (!vsc8531)
2230                 return -ENOMEM;
2231
2232         phydev->priv = vsc8531;
2233
2234         vsc8584_get_base_addr(phydev);
2235         devm_phy_package_join(&phydev->mdio.dev, phydev,
2236                               vsc8531->base_addr, 0);
2237
2238         vsc8531->nleds = 4;
2239         vsc8531->supp_led_modes = VSC8584_SUPP_LED_MODES;
2240         vsc8531->hw_stats = vsc8584_hw_stats;
2241         vsc8531->nstats = ARRAY_SIZE(vsc8584_hw_stats);
2242         vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats,
2243                                       sizeof(u64), GFP_KERNEL);
2244         if (!vsc8531->stats)
2245                 return -ENOMEM;
2246
2247         return vsc85xx_dt_led_modes_get(phydev, default_mode);
2248 }
2249
2250 static int vsc8584_probe(struct phy_device *phydev)
2251 {
2252         struct vsc8531_private *vsc8531;
2253         u32 default_mode[4] = {VSC8531_LINK_1000_ACTIVITY,
2254            VSC8531_LINK_100_ACTIVITY, VSC8531_LINK_ACTIVITY,
2255            VSC8531_DUPLEX_COLLISION};
2256         int ret;
2257
2258         if ((phydev->phy_id & MSCC_DEV_REV_MASK) != VSC8584_REVB) {
2259                 dev_err(&phydev->mdio.dev, "Only VSC8584 revB is supported.\n");
2260                 return -ENOTSUPP;
2261         }
2262
2263         vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL);
2264         if (!vsc8531)
2265                 return -ENOMEM;
2266
2267         phydev->priv = vsc8531;
2268
2269         vsc8584_get_base_addr(phydev);
2270         devm_phy_package_join(&phydev->mdio.dev, phydev, vsc8531->base_addr,
2271                               sizeof(struct vsc85xx_shared_private));
2272
2273         vsc8531->nleds = 4;
2274         vsc8531->supp_led_modes = VSC8584_SUPP_LED_MODES;
2275         vsc8531->hw_stats = vsc8584_hw_stats;
2276         vsc8531->nstats = ARRAY_SIZE(vsc8584_hw_stats);
2277         vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats,
2278                                       sizeof(u64), GFP_KERNEL);
2279         if (!vsc8531->stats)
2280                 return -ENOMEM;
2281
2282         if (phy_package_probe_once(phydev)) {
2283                 ret = vsc8584_ptp_probe_once(phydev);
2284                 if (ret)
2285                         return ret;
2286         }
2287
2288         ret = vsc8584_ptp_probe(phydev);
2289         if (ret)
2290                 return ret;
2291
2292         return vsc85xx_dt_led_modes_get(phydev, default_mode);
2293 }
2294
2295 static int vsc85xx_probe(struct phy_device *phydev)
2296 {
2297         struct vsc8531_private *vsc8531;
2298         int rate_magic;
2299         u32 default_mode[2] = {VSC8531_LINK_1000_ACTIVITY,
2300            VSC8531_LINK_100_ACTIVITY};
2301
2302         rate_magic = vsc85xx_edge_rate_magic_get(phydev);
2303         if (rate_magic < 0)
2304                 return rate_magic;
2305
2306         vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL);
2307         if (!vsc8531)
2308                 return -ENOMEM;
2309
2310         phydev->priv = vsc8531;
2311
2312         vsc8531->rate_magic = rate_magic;
2313         vsc8531->nleds = 2;
2314         vsc8531->supp_led_modes = VSC85XX_SUPP_LED_MODES;
2315         vsc8531->hw_stats = vsc85xx_hw_stats;
2316         vsc8531->nstats = ARRAY_SIZE(vsc85xx_hw_stats);
2317         vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats,
2318                                       sizeof(u64), GFP_KERNEL);
2319         if (!vsc8531->stats)
2320                 return -ENOMEM;
2321
2322         return vsc85xx_dt_led_modes_get(phydev, default_mode);
2323 }
2324
2325 /* Microsemi VSC85xx PHYs */
2326 static struct phy_driver vsc85xx_driver[] = {
2327 {
2328         .phy_id         = PHY_ID_VSC8502,
2329         .name           = "Microsemi GE VSC8502 SyncE",
2330         .phy_id_mask    = 0xfffffff0,
2331         /* PHY_BASIC_FEATURES */
2332         .soft_reset     = &genphy_soft_reset,
2333         .config_init    = &vsc85xx_config_init,
2334         .config_aneg    = &vsc85xx_config_aneg,
2335         .read_status    = &vsc85xx_read_status,
2336         .handle_interrupt = vsc85xx_handle_interrupt,
2337         .config_intr    = &vsc85xx_config_intr,
2338         .suspend        = &genphy_suspend,
2339         .resume         = &genphy_resume,
2340         .probe          = &vsc85xx_probe,
2341         .set_wol        = &vsc85xx_wol_set,
2342         .get_wol        = &vsc85xx_wol_get,
2343         .get_tunable    = &vsc85xx_get_tunable,
2344         .set_tunable    = &vsc85xx_set_tunable,
2345         .read_page      = &vsc85xx_phy_read_page,
2346         .write_page     = &vsc85xx_phy_write_page,
2347         .get_sset_count = &vsc85xx_get_sset_count,
2348         .get_strings    = &vsc85xx_get_strings,
2349         .get_stats      = &vsc85xx_get_stats,
2350 },
2351 {
2352         .phy_id         = PHY_ID_VSC8504,
2353         .name           = "Microsemi GE VSC8504 SyncE",
2354         .phy_id_mask    = 0xfffffff0,
2355         /* PHY_GBIT_FEATURES */
2356         .soft_reset     = &genphy_soft_reset,
2357         .config_init    = &vsc8584_config_init,
2358         .config_aneg    = &vsc85xx_config_aneg,
2359         .aneg_done      = &genphy_aneg_done,
2360         .read_status    = &vsc85xx_read_status,
2361         .handle_interrupt = vsc85xx_handle_interrupt,
2362         .config_intr    = &vsc85xx_config_intr,
2363         .suspend        = &genphy_suspend,
2364         .resume         = &genphy_resume,
2365         .probe          = &vsc8574_probe,
2366         .set_wol        = &vsc85xx_wol_set,
2367         .get_wol        = &vsc85xx_wol_get,
2368         .get_tunable    = &vsc85xx_get_tunable,
2369         .set_tunable    = &vsc85xx_set_tunable,
2370         .read_page      = &vsc85xx_phy_read_page,
2371         .write_page     = &vsc85xx_phy_write_page,
2372         .get_sset_count = &vsc85xx_get_sset_count,
2373         .get_strings    = &vsc85xx_get_strings,
2374         .get_stats      = &vsc85xx_get_stats,
2375 },
2376 {
2377         .phy_id         = PHY_ID_VSC8514,
2378         .name           = "Microsemi GE VSC8514 SyncE",
2379         .phy_id_mask    = 0xfffffff0,
2380         .soft_reset     = &genphy_soft_reset,
2381         .config_init    = &vsc8514_config_init,
2382         .config_aneg    = &vsc85xx_config_aneg,
2383         .read_status    = &vsc85xx_read_status,
2384         .handle_interrupt = vsc85xx_handle_interrupt,
2385         .config_intr    = &vsc85xx_config_intr,
2386         .suspend        = &genphy_suspend,
2387         .resume         = &genphy_resume,
2388         .probe          = &vsc8514_probe,
2389         .set_wol        = &vsc85xx_wol_set,
2390         .get_wol        = &vsc85xx_wol_get,
2391         .get_tunable    = &vsc85xx_get_tunable,
2392         .set_tunable    = &vsc85xx_set_tunable,
2393         .read_page      = &vsc85xx_phy_read_page,
2394         .write_page     = &vsc85xx_phy_write_page,
2395         .get_sset_count = &vsc85xx_get_sset_count,
2396         .get_strings    = &vsc85xx_get_strings,
2397         .get_stats      = &vsc85xx_get_stats,
2398 },
2399 {
2400         .phy_id         = PHY_ID_VSC8530,
2401         .name           = "Microsemi FE VSC8530",
2402         .phy_id_mask    = 0xfffffff0,
2403         /* PHY_BASIC_FEATURES */
2404         .soft_reset     = &genphy_soft_reset,
2405         .config_init    = &vsc85xx_config_init,
2406         .config_aneg    = &vsc85xx_config_aneg,
2407         .read_status    = &vsc85xx_read_status,
2408         .handle_interrupt = vsc85xx_handle_interrupt,
2409         .config_intr    = &vsc85xx_config_intr,
2410         .suspend        = &genphy_suspend,
2411         .resume         = &genphy_resume,
2412         .probe          = &vsc85xx_probe,
2413         .set_wol        = &vsc85xx_wol_set,
2414         .get_wol        = &vsc85xx_wol_get,
2415         .get_tunable    = &vsc85xx_get_tunable,
2416         .set_tunable    = &vsc85xx_set_tunable,
2417         .read_page      = &vsc85xx_phy_read_page,
2418         .write_page     = &vsc85xx_phy_write_page,
2419         .get_sset_count = &vsc85xx_get_sset_count,
2420         .get_strings    = &vsc85xx_get_strings,
2421         .get_stats      = &vsc85xx_get_stats,
2422 },
2423 {
2424         .phy_id         = PHY_ID_VSC8531,
2425         .name           = "Microsemi VSC8531",
2426         .phy_id_mask    = 0xfffffff0,
2427         /* PHY_GBIT_FEATURES */
2428         .soft_reset     = &genphy_soft_reset,
2429         .config_init    = &vsc85xx_config_init,
2430         .config_aneg    = &vsc85xx_config_aneg,
2431         .read_status    = &vsc85xx_read_status,
2432         .handle_interrupt = vsc85xx_handle_interrupt,
2433         .config_intr    = &vsc85xx_config_intr,
2434         .suspend        = &genphy_suspend,
2435         .resume         = &genphy_resume,
2436         .probe          = &vsc85xx_probe,
2437         .set_wol        = &vsc85xx_wol_set,
2438         .get_wol        = &vsc85xx_wol_get,
2439         .get_tunable    = &vsc85xx_get_tunable,
2440         .set_tunable    = &vsc85xx_set_tunable,
2441         .read_page      = &vsc85xx_phy_read_page,
2442         .write_page     = &vsc85xx_phy_write_page,
2443         .get_sset_count = &vsc85xx_get_sset_count,
2444         .get_strings    = &vsc85xx_get_strings,
2445         .get_stats      = &vsc85xx_get_stats,
2446 },
2447 {
2448         .phy_id         = PHY_ID_VSC8540,
2449         .name           = "Microsemi FE VSC8540 SyncE",
2450         .phy_id_mask    = 0xfffffff0,
2451         /* PHY_BASIC_FEATURES */
2452         .soft_reset     = &genphy_soft_reset,
2453         .config_init    = &vsc85xx_config_init,
2454         .config_aneg    = &vsc85xx_config_aneg,
2455         .read_status    = &vsc85xx_read_status,
2456         .handle_interrupt = vsc85xx_handle_interrupt,
2457         .config_intr    = &vsc85xx_config_intr,
2458         .suspend        = &genphy_suspend,
2459         .resume         = &genphy_resume,
2460         .probe          = &vsc85xx_probe,
2461         .set_wol        = &vsc85xx_wol_set,
2462         .get_wol        = &vsc85xx_wol_get,
2463         .get_tunable    = &vsc85xx_get_tunable,
2464         .set_tunable    = &vsc85xx_set_tunable,
2465         .read_page      = &vsc85xx_phy_read_page,
2466         .write_page     = &vsc85xx_phy_write_page,
2467         .get_sset_count = &vsc85xx_get_sset_count,
2468         .get_strings    = &vsc85xx_get_strings,
2469         .get_stats      = &vsc85xx_get_stats,
2470 },
2471 {
2472         .phy_id         = PHY_ID_VSC8541,
2473         .name           = "Microsemi VSC8541 SyncE",
2474         .phy_id_mask    = 0xfffffff0,
2475         /* PHY_GBIT_FEATURES */
2476         .soft_reset     = &genphy_soft_reset,
2477         .config_init    = &vsc85xx_config_init,
2478         .config_aneg    = &vsc85xx_config_aneg,
2479         .read_status    = &vsc85xx_read_status,
2480         .handle_interrupt = vsc85xx_handle_interrupt,
2481         .config_intr    = &vsc85xx_config_intr,
2482         .suspend        = &genphy_suspend,
2483         .resume         = &genphy_resume,
2484         .probe          = &vsc85xx_probe,
2485         .set_wol        = &vsc85xx_wol_set,
2486         .get_wol        = &vsc85xx_wol_get,
2487         .get_tunable    = &vsc85xx_get_tunable,
2488         .set_tunable    = &vsc85xx_set_tunable,
2489         .read_page      = &vsc85xx_phy_read_page,
2490         .write_page     = &vsc85xx_phy_write_page,
2491         .get_sset_count = &vsc85xx_get_sset_count,
2492         .get_strings    = &vsc85xx_get_strings,
2493         .get_stats      = &vsc85xx_get_stats,
2494 },
2495 {
2496         .phy_id         = PHY_ID_VSC8552,
2497         .name           = "Microsemi GE VSC8552 SyncE",
2498         .phy_id_mask    = 0xfffffff0,
2499         /* PHY_GBIT_FEATURES */
2500         .soft_reset     = &genphy_soft_reset,
2501         .config_init    = &vsc8584_config_init,
2502         .config_aneg    = &vsc85xx_config_aneg,
2503         .read_status    = &vsc85xx_read_status,
2504         .handle_interrupt = vsc85xx_handle_interrupt,
2505         .config_intr    = &vsc85xx_config_intr,
2506         .suspend        = &genphy_suspend,
2507         .resume         = &genphy_resume,
2508         .probe          = &vsc8574_probe,
2509         .set_wol        = &vsc85xx_wol_set,
2510         .get_wol        = &vsc85xx_wol_get,
2511         .get_tunable    = &vsc85xx_get_tunable,
2512         .set_tunable    = &vsc85xx_set_tunable,
2513         .read_page      = &vsc85xx_phy_read_page,
2514         .write_page     = &vsc85xx_phy_write_page,
2515         .get_sset_count = &vsc85xx_get_sset_count,
2516         .get_strings    = &vsc85xx_get_strings,
2517         .get_stats      = &vsc85xx_get_stats,
2518 },
2519 {
2520         .phy_id         = PHY_ID_VSC856X,
2521         .name           = "Microsemi GE VSC856X SyncE",
2522         .phy_id_mask    = 0xfffffff0,
2523         /* PHY_GBIT_FEATURES */
2524         .soft_reset     = &genphy_soft_reset,
2525         .config_init    = &vsc8584_config_init,
2526         .config_aneg    = &vsc85xx_config_aneg,
2527         .read_status    = &vsc85xx_read_status,
2528         .handle_interrupt = vsc85xx_handle_interrupt,
2529         .config_intr    = &vsc85xx_config_intr,
2530         .suspend        = &genphy_suspend,
2531         .resume         = &genphy_resume,
2532         .probe          = &vsc8584_probe,
2533         .get_tunable    = &vsc85xx_get_tunable,
2534         .set_tunable    = &vsc85xx_set_tunable,
2535         .read_page      = &vsc85xx_phy_read_page,
2536         .write_page     = &vsc85xx_phy_write_page,
2537         .get_sset_count = &vsc85xx_get_sset_count,
2538         .get_strings    = &vsc85xx_get_strings,
2539         .get_stats      = &vsc85xx_get_stats,
2540 },
2541 {
2542         .phy_id         = PHY_ID_VSC8572,
2543         .name           = "Microsemi GE VSC8572 SyncE",
2544         .phy_id_mask    = 0xfffffff0,
2545         /* PHY_GBIT_FEATURES */
2546         .soft_reset     = &genphy_soft_reset,
2547         .config_init    = &vsc8584_config_init,
2548         .config_aneg    = &vsc85xx_config_aneg,
2549         .aneg_done      = &genphy_aneg_done,
2550         .read_status    = &vsc85xx_read_status,
2551         .handle_interrupt = &vsc8584_handle_interrupt,
2552         .config_intr    = &vsc85xx_config_intr,
2553         .suspend        = &genphy_suspend,
2554         .resume         = &genphy_resume,
2555         .probe          = &vsc8574_probe,
2556         .set_wol        = &vsc85xx_wol_set,
2557         .get_wol        = &vsc85xx_wol_get,
2558         .get_tunable    = &vsc85xx_get_tunable,
2559         .set_tunable    = &vsc85xx_set_tunable,
2560         .read_page      = &vsc85xx_phy_read_page,
2561         .write_page     = &vsc85xx_phy_write_page,
2562         .get_sset_count = &vsc85xx_get_sset_count,
2563         .get_strings    = &vsc85xx_get_strings,
2564         .get_stats      = &vsc85xx_get_stats,
2565 },
2566 {
2567         .phy_id         = PHY_ID_VSC8574,
2568         .name           = "Microsemi GE VSC8574 SyncE",
2569         .phy_id_mask    = 0xfffffff0,
2570         /* PHY_GBIT_FEATURES */
2571         .soft_reset     = &genphy_soft_reset,
2572         .config_init    = &vsc8584_config_init,
2573         .config_aneg    = &vsc85xx_config_aneg,
2574         .aneg_done      = &genphy_aneg_done,
2575         .read_status    = &vsc85xx_read_status,
2576         .handle_interrupt = vsc85xx_handle_interrupt,
2577         .config_intr    = &vsc85xx_config_intr,
2578         .suspend        = &genphy_suspend,
2579         .resume         = &genphy_resume,
2580         .probe          = &vsc8574_probe,
2581         .set_wol        = &vsc85xx_wol_set,
2582         .get_wol        = &vsc85xx_wol_get,
2583         .get_tunable    = &vsc85xx_get_tunable,
2584         .set_tunable    = &vsc85xx_set_tunable,
2585         .read_page      = &vsc85xx_phy_read_page,
2586         .write_page     = &vsc85xx_phy_write_page,
2587         .get_sset_count = &vsc85xx_get_sset_count,
2588         .get_strings    = &vsc85xx_get_strings,
2589         .get_stats      = &vsc85xx_get_stats,
2590 },
2591 {
2592         .phy_id         = PHY_ID_VSC8575,
2593         .name           = "Microsemi GE VSC8575 SyncE",
2594         .phy_id_mask    = 0xfffffff0,
2595         /* PHY_GBIT_FEATURES */
2596         .soft_reset     = &genphy_soft_reset,
2597         .config_init    = &vsc8584_config_init,
2598         .config_aneg    = &vsc85xx_config_aneg,
2599         .aneg_done      = &genphy_aneg_done,
2600         .read_status    = &vsc85xx_read_status,
2601         .handle_interrupt = &vsc8584_handle_interrupt,
2602         .config_intr    = &vsc85xx_config_intr,
2603         .suspend        = &genphy_suspend,
2604         .resume         = &genphy_resume,
2605         .probe          = &vsc8584_probe,
2606         .get_tunable    = &vsc85xx_get_tunable,
2607         .set_tunable    = &vsc85xx_set_tunable,
2608         .read_page      = &vsc85xx_phy_read_page,
2609         .write_page     = &vsc85xx_phy_write_page,
2610         .get_sset_count = &vsc85xx_get_sset_count,
2611         .get_strings    = &vsc85xx_get_strings,
2612         .get_stats      = &vsc85xx_get_stats,
2613 },
2614 {
2615         .phy_id         = PHY_ID_VSC8582,
2616         .name           = "Microsemi GE VSC8582 SyncE",
2617         .phy_id_mask    = 0xfffffff0,
2618         /* PHY_GBIT_FEATURES */
2619         .soft_reset     = &genphy_soft_reset,
2620         .config_init    = &vsc8584_config_init,
2621         .config_aneg    = &vsc85xx_config_aneg,
2622         .aneg_done      = &genphy_aneg_done,
2623         .read_status    = &vsc85xx_read_status,
2624         .handle_interrupt = &vsc8584_handle_interrupt,
2625         .config_intr    = &vsc85xx_config_intr,
2626         .suspend        = &genphy_suspend,
2627         .resume         = &genphy_resume,
2628         .probe          = &vsc8584_probe,
2629         .get_tunable    = &vsc85xx_get_tunable,
2630         .set_tunable    = &vsc85xx_set_tunable,
2631         .read_page      = &vsc85xx_phy_read_page,
2632         .write_page     = &vsc85xx_phy_write_page,
2633         .get_sset_count = &vsc85xx_get_sset_count,
2634         .get_strings    = &vsc85xx_get_strings,
2635         .get_stats      = &vsc85xx_get_stats,
2636 },
2637 {
2638         .phy_id         = PHY_ID_VSC8584,
2639         .name           = "Microsemi GE VSC8584 SyncE",
2640         .phy_id_mask    = 0xfffffff0,
2641         /* PHY_GBIT_FEATURES */
2642         .soft_reset     = &genphy_soft_reset,
2643         .config_init    = &vsc8584_config_init,
2644         .config_aneg    = &vsc85xx_config_aneg,
2645         .aneg_done      = &genphy_aneg_done,
2646         .read_status    = &vsc85xx_read_status,
2647         .handle_interrupt = &vsc8584_handle_interrupt,
2648         .config_intr    = &vsc85xx_config_intr,
2649         .suspend        = &genphy_suspend,
2650         .resume         = &genphy_resume,
2651         .probe          = &vsc8584_probe,
2652         .get_tunable    = &vsc85xx_get_tunable,
2653         .set_tunable    = &vsc85xx_set_tunable,
2654         .read_page      = &vsc85xx_phy_read_page,
2655         .write_page     = &vsc85xx_phy_write_page,
2656         .get_sset_count = &vsc85xx_get_sset_count,
2657         .get_strings    = &vsc85xx_get_strings,
2658         .get_stats      = &vsc85xx_get_stats,
2659         .link_change_notify = &vsc85xx_link_change_notify,
2660 }
2661
2662 };
2663
2664 module_phy_driver(vsc85xx_driver);
2665
2666 static struct mdio_device_id __maybe_unused vsc85xx_tbl[] = {
2667         { PHY_ID_VSC8504, 0xfffffff0, },
2668         { PHY_ID_VSC8514, 0xfffffff0, },
2669         { PHY_ID_VSC8530, 0xfffffff0, },
2670         { PHY_ID_VSC8531, 0xfffffff0, },
2671         { PHY_ID_VSC8540, 0xfffffff0, },
2672         { PHY_ID_VSC8541, 0xfffffff0, },
2673         { PHY_ID_VSC8552, 0xfffffff0, },
2674         { PHY_ID_VSC856X, 0xfffffff0, },
2675         { PHY_ID_VSC8572, 0xfffffff0, },
2676         { PHY_ID_VSC8574, 0xfffffff0, },
2677         { PHY_ID_VSC8575, 0xfffffff0, },
2678         { PHY_ID_VSC8582, 0xfffffff0, },
2679         { PHY_ID_VSC8584, 0xfffffff0, },
2680         { }
2681 };
2682
2683 MODULE_DEVICE_TABLE(mdio, vsc85xx_tbl);
2684
2685 MODULE_DESCRIPTION("Microsemi VSC85xx PHY driver");
2686 MODULE_AUTHOR("Nagaraju Lakkaraju");
2687 MODULE_LICENSE("Dual MIT/GPL");
2688
2689 MODULE_FIRMWARE(MSCC_VSC8584_REVB_INT8051_FW);
2690 MODULE_FIRMWARE(MSCC_VSC8574_REVB_INT8051_FW);