1 // SPDX-License-Identifier: GPL-2.0+
3 * drivers/net/phy/marvell.c
5 * Driver for Marvell PHYs
9 * Copyright (c) 2004 Freescale Semiconductor, Inc.
11 * Copyright (c) 2013 Michael Stapelberg <michael@stapelberg.de>
13 #include <linux/kernel.h>
14 #include <linux/string.h>
15 #include <linux/ctype.h>
16 #include <linux/errno.h>
17 #include <linux/unistd.h>
18 #include <linux/hwmon.h>
19 #include <linux/interrupt.h>
20 #include <linux/init.h>
21 #include <linux/delay.h>
22 #include <linux/netdevice.h>
23 #include <linux/etherdevice.h>
24 #include <linux/skbuff.h>
25 #include <linux/spinlock.h>
27 #include <linux/module.h>
28 #include <linux/mii.h>
29 #include <linux/ethtool.h>
30 #include <linux/ethtool_netlink.h>
31 #include <linux/phy.h>
32 #include <linux/marvell_phy.h>
33 #include <linux/bitfield.h>
35 #include <linux/sfp.h>
39 #include <linux/uaccess.h>
41 #define MII_MARVELL_PHY_PAGE 22
42 #define MII_MARVELL_COPPER_PAGE 0x00
43 #define MII_MARVELL_FIBER_PAGE 0x01
44 #define MII_MARVELL_MSCR_PAGE 0x02
45 #define MII_MARVELL_LED_PAGE 0x03
46 #define MII_MARVELL_VCT5_PAGE 0x05
47 #define MII_MARVELL_MISC_TEST_PAGE 0x06
48 #define MII_MARVELL_VCT7_PAGE 0x07
49 #define MII_MARVELL_WOL_PAGE 0x11
50 #define MII_MARVELL_MODE_PAGE 0x12
52 #define MII_M1011_IEVENT 0x13
53 #define MII_M1011_IEVENT_CLEAR 0x0000
55 #define MII_M1011_IMASK 0x12
56 #define MII_M1011_IMASK_INIT 0x6400
57 #define MII_M1011_IMASK_CLEAR 0x0000
59 #define MII_M1011_PHY_SCR 0x10
60 #define MII_M1011_PHY_SCR_DOWNSHIFT_EN BIT(11)
61 #define MII_M1011_PHY_SCR_DOWNSHIFT_MASK GENMASK(14, 12)
62 #define MII_M1011_PHY_SCR_DOWNSHIFT_MAX 8
63 #define MII_M1011_PHY_SCR_MDI (0x0 << 5)
64 #define MII_M1011_PHY_SCR_MDI_X (0x1 << 5)
65 #define MII_M1011_PHY_SCR_AUTO_CROSS (0x3 << 5)
67 #define MII_M1011_PHY_SSR 0x11
68 #define MII_M1011_PHY_SSR_DOWNSHIFT BIT(5)
70 #define MII_M1111_PHY_LED_CONTROL 0x18
71 #define MII_M1111_PHY_LED_DIRECT 0x4100
72 #define MII_M1111_PHY_LED_COMBINE 0x411c
73 #define MII_M1111_PHY_EXT_CR 0x14
74 #define MII_M1111_PHY_EXT_CR_DOWNSHIFT_MASK GENMASK(11, 9)
75 #define MII_M1111_PHY_EXT_CR_DOWNSHIFT_MAX 8
76 #define MII_M1111_PHY_EXT_CR_DOWNSHIFT_EN BIT(8)
77 #define MII_M1111_RGMII_RX_DELAY BIT(7)
78 #define MII_M1111_RGMII_TX_DELAY BIT(1)
79 #define MII_M1111_PHY_EXT_SR 0x1b
81 #define MII_M1111_HWCFG_MODE_MASK 0xf
82 #define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3
83 #define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4
84 #define MII_M1111_HWCFG_MODE_RTBI 0x7
85 #define MII_M1111_HWCFG_MODE_COPPER_1000X_AN 0x8
86 #define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9
87 #define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb
88 #define MII_M1111_HWCFG_MODE_COPPER_1000X_NOAN 0xc
89 #define MII_M1111_HWCFG_SERIAL_AN_BYPASS BIT(12)
90 #define MII_M1111_HWCFG_FIBER_COPPER_RES BIT(13)
91 #define MII_M1111_HWCFG_FIBER_COPPER_AUTO BIT(15)
93 #define MII_88E1121_PHY_MSCR_REG 21
94 #define MII_88E1121_PHY_MSCR_RX_DELAY BIT(5)
95 #define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4)
96 #define MII_88E1121_PHY_MSCR_DELAY_MASK (BIT(5) | BIT(4))
98 #define MII_88E1121_MISC_TEST 0x1a
99 #define MII_88E1510_MISC_TEST_TEMP_THRESHOLD_MASK 0x1f00
100 #define MII_88E1510_MISC_TEST_TEMP_THRESHOLD_SHIFT 8
101 #define MII_88E1510_MISC_TEST_TEMP_IRQ_EN BIT(7)
102 #define MII_88E1510_MISC_TEST_TEMP_IRQ BIT(6)
103 #define MII_88E1121_MISC_TEST_TEMP_SENSOR_EN BIT(5)
104 #define MII_88E1121_MISC_TEST_TEMP_MASK 0x1f
106 #define MII_88E1510_TEMP_SENSOR 0x1b
107 #define MII_88E1510_TEMP_SENSOR_MASK 0xff
109 #define MII_88E1540_COPPER_CTRL3 0x1a
110 #define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK GENMASK(11, 10)
111 #define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS 0
112 #define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS 1
113 #define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS 2
114 #define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS 3
115 #define MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN BIT(9)
117 #define MII_88E6390_MISC_TEST 0x1b
118 #define MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE_SAMPLE_1S (0x0 << 14)
119 #define MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE (0x1 << 14)
120 #define MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE_ONESHOT (0x2 << 14)
121 #define MII_88E6390_MISC_TEST_TEMP_SENSOR_DISABLE (0x3 << 14)
122 #define MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK (0x3 << 14)
123 #define MII_88E6393_MISC_TEST_SAMPLES_2048 (0x0 << 11)
124 #define MII_88E6393_MISC_TEST_SAMPLES_4096 (0x1 << 11)
125 #define MII_88E6393_MISC_TEST_SAMPLES_8192 (0x2 << 11)
126 #define MII_88E6393_MISC_TEST_SAMPLES_16384 (0x3 << 11)
127 #define MII_88E6393_MISC_TEST_SAMPLES_MASK (0x3 << 11)
128 #define MII_88E6393_MISC_TEST_RATE_2_3MS (0x5 << 8)
129 #define MII_88E6393_MISC_TEST_RATE_6_4MS (0x6 << 8)
130 #define MII_88E6393_MISC_TEST_RATE_11_9MS (0x7 << 8)
131 #define MII_88E6393_MISC_TEST_RATE_MASK (0x7 << 8)
133 #define MII_88E6390_TEMP_SENSOR 0x1c
134 #define MII_88E6393_TEMP_SENSOR_THRESHOLD_MASK 0xff00
135 #define MII_88E6393_TEMP_SENSOR_THRESHOLD_SHIFT 8
136 #define MII_88E6390_TEMP_SENSOR_MASK 0xff
137 #define MII_88E6390_TEMP_SENSOR_SAMPLES 10
139 #define MII_88E1318S_PHY_MSCR1_REG 16
140 #define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6)
142 /* Copper Specific Interrupt Enable Register */
143 #define MII_88E1318S_PHY_CSIER 0x12
144 /* WOL Event Interrupt Enable */
145 #define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)
147 /* LED Timer Control Register */
148 #define MII_88E1318S_PHY_LED_TCR 0x12
149 #define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
150 #define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
151 #define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11)
153 /* Magic Packet MAC address registers */
154 #define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17
155 #define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18
156 #define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19
158 #define MII_88E1318S_PHY_WOL_CTRL 0x10
159 #define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
160 #define MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE BIT(13)
161 #define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
163 #define MII_PHY_LED_CTRL 16
164 #define MII_88E1121_PHY_LED_DEF 0x0030
165 #define MII_88E1510_PHY_LED_DEF 0x1177
166 #define MII_88E1510_PHY_LED0_LINK_LED1_ACTIVE 0x1040
168 #define MII_M1011_PHY_STATUS 0x11
169 #define MII_M1011_PHY_STATUS_1000 0x8000
170 #define MII_M1011_PHY_STATUS_100 0x4000
171 #define MII_M1011_PHY_STATUS_SPD_MASK 0xc000
172 #define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000
173 #define MII_M1011_PHY_STATUS_RESOLVED 0x0800
174 #define MII_M1011_PHY_STATUS_LINK 0x0400
176 #define MII_88E3016_PHY_SPEC_CTRL 0x10
177 #define MII_88E3016_DISABLE_SCRAMBLER 0x0200
178 #define MII_88E3016_AUTO_MDIX_CROSSOVER 0x0030
180 #define MII_88E1510_GEN_CTRL_REG_1 0x14
181 #define MII_88E1510_GEN_CTRL_REG_1_MODE_MASK 0x7
182 #define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII 0x0 /* RGMII to copper */
183 #define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII 0x1 /* SGMII to copper */
184 /* RGMII to 1000BASE-X */
185 #define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_1000X 0x2
186 /* RGMII to 100BASE-FX */
187 #define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_100FX 0x3
189 #define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII 0x4
190 #define MII_88E1510_GEN_CTRL_REG_1_RESET 0x8000 /* Soft reset */
192 #define MII_88E1510_MSCR_2 0x15
194 #define MII_VCT5_TX_RX_MDI0_COUPLING 0x10
195 #define MII_VCT5_TX_RX_MDI1_COUPLING 0x11
196 #define MII_VCT5_TX_RX_MDI2_COUPLING 0x12
197 #define MII_VCT5_TX_RX_MDI3_COUPLING 0x13
198 #define MII_VCT5_TX_RX_AMPLITUDE_MASK 0x7f00
199 #define MII_VCT5_TX_RX_AMPLITUDE_SHIFT 8
200 #define MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION BIT(15)
202 #define MII_VCT5_CTRL 0x17
203 #define MII_VCT5_CTRL_ENABLE BIT(15)
204 #define MII_VCT5_CTRL_COMPLETE BIT(14)
205 #define MII_VCT5_CTRL_TX_SAME_CHANNEL (0x0 << 11)
206 #define MII_VCT5_CTRL_TX0_CHANNEL (0x4 << 11)
207 #define MII_VCT5_CTRL_TX1_CHANNEL (0x5 << 11)
208 #define MII_VCT5_CTRL_TX2_CHANNEL (0x6 << 11)
209 #define MII_VCT5_CTRL_TX3_CHANNEL (0x7 << 11)
210 #define MII_VCT5_CTRL_SAMPLES_2 (0x0 << 8)
211 #define MII_VCT5_CTRL_SAMPLES_4 (0x1 << 8)
212 #define MII_VCT5_CTRL_SAMPLES_8 (0x2 << 8)
213 #define MII_VCT5_CTRL_SAMPLES_16 (0x3 << 8)
214 #define MII_VCT5_CTRL_SAMPLES_32 (0x4 << 8)
215 #define MII_VCT5_CTRL_SAMPLES_64 (0x5 << 8)
216 #define MII_VCT5_CTRL_SAMPLES_128 (0x6 << 8)
217 #define MII_VCT5_CTRL_SAMPLES_DEFAULT (0x6 << 8)
218 #define MII_VCT5_CTRL_SAMPLES_256 (0x7 << 8)
219 #define MII_VCT5_CTRL_SAMPLES_SHIFT 8
220 #define MII_VCT5_CTRL_MODE_MAXIMUM_PEEK (0x0 << 6)
221 #define MII_VCT5_CTRL_MODE_FIRST_LAST_PEEK (0x1 << 6)
222 #define MII_VCT5_CTRL_MODE_OFFSET (0x2 << 6)
223 #define MII_VCT5_CTRL_SAMPLE_POINT (0x3 << 6)
224 #define MII_VCT5_CTRL_PEEK_HYST_DEFAULT 3
226 #define MII_VCT5_SAMPLE_POINT_DISTANCE 0x18
227 #define MII_VCT5_SAMPLE_POINT_DISTANCE_MAX 511
228 #define MII_VCT5_TX_PULSE_CTRL 0x1c
229 #define MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN BIT(12)
230 #define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS (0x0 << 10)
231 #define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_96nS (0x1 << 10)
232 #define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_64nS (0x2 << 10)
233 #define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS (0x3 << 10)
234 #define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_SHIFT 10
235 #define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_1000mV (0x0 << 8)
236 #define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_750mV (0x1 << 8)
237 #define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_500mV (0x2 << 8)
238 #define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_250mV (0x3 << 8)
239 #define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_SHIFT 8
240 #define MII_VCT5_TX_PULSE_CTRL_MAX_AMP BIT(7)
241 #define MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV (0x6 << 0)
243 /* For TDR measurements less than 11 meters, a short pulse should be
246 #define TDR_SHORT_CABLE_LENGTH 11
248 #define MII_VCT7_PAIR_0_DISTANCE 0x10
249 #define MII_VCT7_PAIR_1_DISTANCE 0x11
250 #define MII_VCT7_PAIR_2_DISTANCE 0x12
251 #define MII_VCT7_PAIR_3_DISTANCE 0x13
253 #define MII_VCT7_RESULTS 0x14
254 #define MII_VCT7_RESULTS_PAIR3_MASK 0xf000
255 #define MII_VCT7_RESULTS_PAIR2_MASK 0x0f00
256 #define MII_VCT7_RESULTS_PAIR1_MASK 0x00f0
257 #define MII_VCT7_RESULTS_PAIR0_MASK 0x000f
258 #define MII_VCT7_RESULTS_PAIR3_SHIFT 12
259 #define MII_VCT7_RESULTS_PAIR2_SHIFT 8
260 #define MII_VCT7_RESULTS_PAIR1_SHIFT 4
261 #define MII_VCT7_RESULTS_PAIR0_SHIFT 0
262 #define MII_VCT7_RESULTS_INVALID 0
263 #define MII_VCT7_RESULTS_OK 1
264 #define MII_VCT7_RESULTS_OPEN 2
265 #define MII_VCT7_RESULTS_SAME_SHORT 3
266 #define MII_VCT7_RESULTS_CROSS_SHORT 4
267 #define MII_VCT7_RESULTS_BUSY 9
269 #define MII_VCT7_CTRL 0x15
270 #define MII_VCT7_CTRL_RUN_NOW BIT(15)
271 #define MII_VCT7_CTRL_RUN_ANEG BIT(14)
272 #define MII_VCT7_CTRL_DISABLE_CROSS BIT(13)
273 #define MII_VCT7_CTRL_RUN_AFTER_BREAK_LINK BIT(12)
274 #define MII_VCT7_CTRL_IN_PROGRESS BIT(11)
275 #define MII_VCT7_CTRL_METERS BIT(10)
276 #define MII_VCT7_CTRL_CENTIMETERS 0
278 #define LPA_PAUSE_FIBER 0x180
279 #define LPA_PAUSE_ASYM_FIBER 0x100
281 #define NB_FIBER_STATS 1
283 MODULE_DESCRIPTION("Marvell PHY driver");
284 MODULE_AUTHOR("Andy Fleming");
285 MODULE_LICENSE("GPL");
287 struct marvell_hw_stat {
294 static struct marvell_hw_stat marvell_hw_stats[] = {
295 { "phy_receive_errors_copper", 0, 21, 16},
296 { "phy_idle_errors", 0, 10, 8 },
297 { "phy_receive_errors_fiber", 1, 21, 16},
300 struct marvell_priv {
301 u64 stats[ARRAY_SIZE(marvell_hw_stats)];
303 struct device *hwmon_dev;
311 static int marvell_read_page(struct phy_device *phydev)
313 return __phy_read(phydev, MII_MARVELL_PHY_PAGE);
316 static int marvell_write_page(struct phy_device *phydev, int page)
318 return __phy_write(phydev, MII_MARVELL_PHY_PAGE, page);
321 static int marvell_set_page(struct phy_device *phydev, int page)
323 return phy_write(phydev, MII_MARVELL_PHY_PAGE, page);
326 static int marvell_ack_interrupt(struct phy_device *phydev)
330 /* Clear the interrupts by reading the reg */
331 err = phy_read(phydev, MII_M1011_IEVENT);
339 static int marvell_config_intr(struct phy_device *phydev)
343 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
344 err = marvell_ack_interrupt(phydev);
348 err = phy_write(phydev, MII_M1011_IMASK,
349 MII_M1011_IMASK_INIT);
351 err = phy_write(phydev, MII_M1011_IMASK,
352 MII_M1011_IMASK_CLEAR);
356 err = marvell_ack_interrupt(phydev);
362 static irqreturn_t marvell_handle_interrupt(struct phy_device *phydev)
366 irq_status = phy_read(phydev, MII_M1011_IEVENT);
367 if (irq_status < 0) {
372 if (!(irq_status & MII_M1011_IMASK_INIT))
375 phy_trigger_machine(phydev);
380 static int marvell_set_polarity(struct phy_device *phydev, int polarity)
386 val = MII_M1011_PHY_SCR_MDI;
389 val = MII_M1011_PHY_SCR_MDI_X;
391 case ETH_TP_MDI_AUTO:
392 case ETH_TP_MDI_INVALID:
394 val = MII_M1011_PHY_SCR_AUTO_CROSS;
398 return phy_modify_changed(phydev, MII_M1011_PHY_SCR,
399 MII_M1011_PHY_SCR_AUTO_CROSS, val);
402 static int marvell_config_aneg(struct phy_device *phydev)
407 err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
413 err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
414 MII_M1111_PHY_LED_DIRECT);
418 err = genphy_config_aneg(phydev);
422 if (phydev->autoneg != AUTONEG_ENABLE || changed) {
423 /* A write to speed/duplex bits (that is performed by
424 * genphy_config_aneg() call above) must be followed by
425 * a software reset. Otherwise, the write has no effect.
427 err = genphy_soft_reset(phydev);
435 static int m88e1101_config_aneg(struct phy_device *phydev)
439 /* This Marvell PHY has an errata which requires
440 * that certain registers get written in order
441 * to restart autonegotiation
443 err = genphy_soft_reset(phydev);
447 err = phy_write(phydev, 0x1d, 0x1f);
451 err = phy_write(phydev, 0x1e, 0x200c);
455 err = phy_write(phydev, 0x1d, 0x5);
459 err = phy_write(phydev, 0x1e, 0);
463 err = phy_write(phydev, 0x1e, 0x100);
467 return marvell_config_aneg(phydev);
470 #if IS_ENABLED(CONFIG_OF_MDIO)
471 /* Set and/or override some configuration registers based on the
472 * marvell,reg-init property stored in the of_node for the phydev.
474 * marvell,reg-init = <reg-page reg mask value>,...;
476 * There may be one or more sets of <reg-page reg mask value>:
478 * reg-page: which register bank to use.
480 * mask: if non-zero, ANDed with existing register value.
481 * value: ORed with the masked value and written to the regiser.
484 static int marvell_of_reg_init(struct phy_device *phydev)
487 int len, i, saved_page, current_page, ret = 0;
489 if (!phydev->mdio.dev.of_node)
492 paddr = of_get_property(phydev->mdio.dev.of_node,
493 "marvell,reg-init", &len);
494 if (!paddr || len < (4 * sizeof(*paddr)))
497 saved_page = phy_save_page(phydev);
500 current_page = saved_page;
502 len /= sizeof(*paddr);
503 for (i = 0; i < len - 3; i += 4) {
504 u16 page = be32_to_cpup(paddr + i);
505 u16 reg = be32_to_cpup(paddr + i + 1);
506 u16 mask = be32_to_cpup(paddr + i + 2);
507 u16 val_bits = be32_to_cpup(paddr + i + 3);
510 if (page != current_page) {
512 ret = marvell_write_page(phydev, page);
519 val = __phy_read(phydev, reg);
528 ret = __phy_write(phydev, reg, val);
533 return phy_restore_page(phydev, saved_page, ret);
536 static int marvell_of_reg_init(struct phy_device *phydev)
540 #endif /* CONFIG_OF_MDIO */
542 static int m88e1121_config_aneg_rgmii_delays(struct phy_device *phydev)
546 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
547 mscr = MII_88E1121_PHY_MSCR_RX_DELAY |
548 MII_88E1121_PHY_MSCR_TX_DELAY;
549 else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
550 mscr = MII_88E1121_PHY_MSCR_RX_DELAY;
551 else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
552 mscr = MII_88E1121_PHY_MSCR_TX_DELAY;
556 return phy_modify_paged_changed(phydev, MII_MARVELL_MSCR_PAGE,
557 MII_88E1121_PHY_MSCR_REG,
558 MII_88E1121_PHY_MSCR_DELAY_MASK, mscr);
561 static int m88e1121_config_aneg(struct phy_device *phydev)
566 if (phy_interface_is_rgmii(phydev)) {
567 err = m88e1121_config_aneg_rgmii_delays(phydev);
574 err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
580 err = genphy_config_aneg(phydev);
584 if (phydev->autoneg != AUTONEG_ENABLE || changed) {
585 /* A software reset is used to ensure a "commit" of the
588 err = genphy_soft_reset(phydev);
596 static int m88e1318_config_aneg(struct phy_device *phydev)
600 err = phy_modify_paged(phydev, MII_MARVELL_MSCR_PAGE,
601 MII_88E1318S_PHY_MSCR1_REG,
602 0, MII_88E1318S_PHY_MSCR1_PAD_ODD);
606 return m88e1121_config_aneg(phydev);
610 * linkmode_adv_to_fiber_adv_t
611 * @advertise: the linkmode advertisement settings
613 * A small helper function that translates linkmode advertisement
614 * settings to phy autonegotiation advertisements for the MII_ADV
615 * register for fiber link.
617 static inline u32 linkmode_adv_to_fiber_adv_t(unsigned long *advertise)
621 if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, advertise))
622 result |= ADVERTISE_1000XHALF;
623 if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, advertise))
624 result |= ADVERTISE_1000XFULL;
626 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertise) &&
627 linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertise))
628 result |= ADVERTISE_1000XPSE_ASYM;
629 else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertise))
630 result |= ADVERTISE_1000XPAUSE;
636 * marvell_config_aneg_fiber - restart auto-negotiation or write BMCR
637 * @phydev: target phy_device struct
639 * Description: If auto-negotiation is enabled, we configure the
640 * advertising, and then restart auto-negotiation. If it is not
641 * enabled, then we write the BMCR. Adapted for fiber link in
642 * some Marvell's devices.
644 static int marvell_config_aneg_fiber(struct phy_device *phydev)
650 if (phydev->autoneg != AUTONEG_ENABLE)
651 return genphy_setup_forced(phydev);
653 /* Only allow advertising what this PHY supports */
654 linkmode_and(phydev->advertising, phydev->advertising,
657 adv = linkmode_adv_to_fiber_adv_t(phydev->advertising);
659 /* Setup fiber advertisement */
660 err = phy_modify_changed(phydev, MII_ADVERTISE,
661 ADVERTISE_1000XHALF | ADVERTISE_1000XFULL |
662 ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM,
669 return genphy_check_and_restart_aneg(phydev, changed);
672 static int m88e1111_config_aneg(struct phy_device *phydev)
674 int extsr = phy_read(phydev, MII_M1111_PHY_EXT_SR);
680 /* If not using SGMII or copper 1000BaseX modes, use normal process.
681 * Steps below are only required for these modes.
683 if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
684 (extsr & MII_M1111_HWCFG_MODE_MASK) !=
685 MII_M1111_HWCFG_MODE_COPPER_1000X_AN)
686 return marvell_config_aneg(phydev);
688 err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
692 /* Configure the copper link first */
693 err = marvell_config_aneg(phydev);
697 /* Then the fiber link */
698 err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
702 if (phydev->interface == PHY_INTERFACE_MODE_SGMII)
703 /* Do not touch the fiber advertisement if we're in copper->sgmii mode.
704 * Just ensure that SGMII-side autonegotiation is enabled.
705 * If we switched from some other mode to SGMII it may not be.
707 err = genphy_check_and_restart_aneg(phydev, false);
709 err = marvell_config_aneg_fiber(phydev);
713 return marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
716 marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
720 static int m88e1510_config_aneg(struct phy_device *phydev)
724 err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
728 /* Configure the copper link first */
729 err = m88e1318_config_aneg(phydev);
733 /* Do not touch the fiber page if we're in copper->sgmii mode */
734 if (phydev->interface == PHY_INTERFACE_MODE_SGMII)
737 /* Then the fiber link */
738 err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
742 err = marvell_config_aneg_fiber(phydev);
746 return marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
749 marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
753 static void marvell_config_led(struct phy_device *phydev)
758 switch (MARVELL_PHY_FAMILY_ID(phydev->phy_id)) {
759 /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */
760 case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1121R):
761 case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1318S):
762 def_config = MII_88E1121_PHY_LED_DEF;
764 /* Default PHY LED config:
765 * LED[0] .. 1000Mbps Link
766 * LED[1] .. 100Mbps Link
767 * LED[2] .. Blink, Activity
769 case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1510):
770 if (phydev->dev_flags & MARVELL_PHY_LED0_LINK_LED1_ACTIVE)
771 def_config = MII_88E1510_PHY_LED0_LINK_LED1_ACTIVE;
773 def_config = MII_88E1510_PHY_LED_DEF;
779 err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL,
782 phydev_warn(phydev, "Fail to config marvell phy LED.\n");
785 static int marvell_config_init(struct phy_device *phydev)
787 /* Set default LED */
788 marvell_config_led(phydev);
790 /* Set registers from marvell,reg-init DT property */
791 return marvell_of_reg_init(phydev);
794 static int m88e3016_config_init(struct phy_device *phydev)
798 /* Enable Scrambler and Auto-Crossover */
799 ret = phy_modify(phydev, MII_88E3016_PHY_SPEC_CTRL,
800 MII_88E3016_DISABLE_SCRAMBLER,
801 MII_88E3016_AUTO_MDIX_CROSSOVER);
805 return marvell_config_init(phydev);
808 static int m88e1111_config_init_hwcfg_mode(struct phy_device *phydev,
810 int fibre_copper_auto)
812 if (fibre_copper_auto)
813 mode |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
815 return phy_modify(phydev, MII_M1111_PHY_EXT_SR,
816 MII_M1111_HWCFG_MODE_MASK |
817 MII_M1111_HWCFG_FIBER_COPPER_AUTO |
818 MII_M1111_HWCFG_FIBER_COPPER_RES,
822 static int m88e1111_config_init_rgmii_delays(struct phy_device *phydev)
826 switch (phydev->interface) {
827 case PHY_INTERFACE_MODE_RGMII_ID:
828 delay = MII_M1111_RGMII_RX_DELAY | MII_M1111_RGMII_TX_DELAY;
830 case PHY_INTERFACE_MODE_RGMII_RXID:
831 delay = MII_M1111_RGMII_RX_DELAY;
833 case PHY_INTERFACE_MODE_RGMII_TXID:
834 delay = MII_M1111_RGMII_TX_DELAY;
841 return phy_modify(phydev, MII_M1111_PHY_EXT_CR,
842 MII_M1111_RGMII_RX_DELAY | MII_M1111_RGMII_TX_DELAY,
846 static int m88e1111_config_init_rgmii(struct phy_device *phydev)
851 err = m88e1111_config_init_rgmii_delays(phydev);
855 temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
859 temp &= ~(MII_M1111_HWCFG_MODE_MASK);
861 if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
862 temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
864 temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
866 return phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
869 static int m88e1111_config_init_sgmii(struct phy_device *phydev)
873 err = m88e1111_config_init_hwcfg_mode(
875 MII_M1111_HWCFG_MODE_SGMII_NO_CLK,
876 MII_M1111_HWCFG_FIBER_COPPER_AUTO);
880 /* make sure copper is selected */
881 return marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
884 static int m88e1111_config_init_rtbi(struct phy_device *phydev)
888 err = m88e1111_config_init_rgmii_delays(phydev);
892 err = m88e1111_config_init_hwcfg_mode(
894 MII_M1111_HWCFG_MODE_RTBI,
895 MII_M1111_HWCFG_FIBER_COPPER_AUTO);
900 err = genphy_soft_reset(phydev);
904 return m88e1111_config_init_hwcfg_mode(
906 MII_M1111_HWCFG_MODE_RTBI,
907 MII_M1111_HWCFG_FIBER_COPPER_AUTO);
910 static int m88e1111_config_init_1000basex(struct phy_device *phydev)
912 int extsr = phy_read(phydev, MII_M1111_PHY_EXT_SR);
918 /* If using copper mode, ensure 1000BaseX auto-negotiation is enabled */
919 mode = extsr & MII_M1111_HWCFG_MODE_MASK;
920 if (mode == MII_M1111_HWCFG_MODE_COPPER_1000X_NOAN) {
921 err = phy_modify(phydev, MII_M1111_PHY_EXT_SR,
922 MII_M1111_HWCFG_MODE_MASK |
923 MII_M1111_HWCFG_SERIAL_AN_BYPASS,
924 MII_M1111_HWCFG_MODE_COPPER_1000X_AN |
925 MII_M1111_HWCFG_SERIAL_AN_BYPASS);
932 static int m88e1111_config_init(struct phy_device *phydev)
936 if (phy_interface_is_rgmii(phydev)) {
937 err = m88e1111_config_init_rgmii(phydev);
942 if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
943 err = m88e1111_config_init_sgmii(phydev);
948 if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
949 err = m88e1111_config_init_rtbi(phydev);
954 if (phydev->interface == PHY_INTERFACE_MODE_1000BASEX) {
955 err = m88e1111_config_init_1000basex(phydev);
960 err = marvell_of_reg_init(phydev);
964 return genphy_soft_reset(phydev);
967 static int m88e1111_get_downshift(struct phy_device *phydev, u8 *data)
969 int val, cnt, enable;
971 val = phy_read(phydev, MII_M1111_PHY_EXT_CR);
975 enable = FIELD_GET(MII_M1111_PHY_EXT_CR_DOWNSHIFT_EN, val);
976 cnt = FIELD_GET(MII_M1111_PHY_EXT_CR_DOWNSHIFT_MASK, val) + 1;
978 *data = enable ? cnt : DOWNSHIFT_DEV_DISABLE;
983 static int m88e1111_set_downshift(struct phy_device *phydev, u8 cnt)
987 if (cnt > MII_M1111_PHY_EXT_CR_DOWNSHIFT_MAX)
991 err = phy_clear_bits(phydev, MII_M1111_PHY_EXT_CR,
992 MII_M1111_PHY_EXT_CR_DOWNSHIFT_EN);
994 val = MII_M1111_PHY_EXT_CR_DOWNSHIFT_EN;
995 val |= FIELD_PREP(MII_M1111_PHY_EXT_CR_DOWNSHIFT_MASK, cnt - 1);
997 err = phy_modify(phydev, MII_M1111_PHY_EXT_CR,
998 MII_M1111_PHY_EXT_CR_DOWNSHIFT_EN |
999 MII_M1111_PHY_EXT_CR_DOWNSHIFT_MASK,
1006 return genphy_soft_reset(phydev);
1009 static int m88e1111_get_tunable(struct phy_device *phydev,
1010 struct ethtool_tunable *tuna, void *data)
1013 case ETHTOOL_PHY_DOWNSHIFT:
1014 return m88e1111_get_downshift(phydev, data);
1020 static int m88e1111_set_tunable(struct phy_device *phydev,
1021 struct ethtool_tunable *tuna, const void *data)
1024 case ETHTOOL_PHY_DOWNSHIFT:
1025 return m88e1111_set_downshift(phydev, *(const u8 *)data);
1031 static int m88e1011_get_downshift(struct phy_device *phydev, u8 *data)
1033 int val, cnt, enable;
1035 val = phy_read(phydev, MII_M1011_PHY_SCR);
1039 enable = FIELD_GET(MII_M1011_PHY_SCR_DOWNSHIFT_EN, val);
1040 cnt = FIELD_GET(MII_M1011_PHY_SCR_DOWNSHIFT_MASK, val) + 1;
1042 *data = enable ? cnt : DOWNSHIFT_DEV_DISABLE;
1047 static int m88e1011_set_downshift(struct phy_device *phydev, u8 cnt)
1051 if (cnt > MII_M1011_PHY_SCR_DOWNSHIFT_MAX)
1055 err = phy_clear_bits(phydev, MII_M1011_PHY_SCR,
1056 MII_M1011_PHY_SCR_DOWNSHIFT_EN);
1058 val = MII_M1011_PHY_SCR_DOWNSHIFT_EN;
1059 val |= FIELD_PREP(MII_M1011_PHY_SCR_DOWNSHIFT_MASK, cnt - 1);
1061 err = phy_modify(phydev, MII_M1011_PHY_SCR,
1062 MII_M1011_PHY_SCR_DOWNSHIFT_EN |
1063 MII_M1011_PHY_SCR_DOWNSHIFT_MASK,
1070 return genphy_soft_reset(phydev);
1073 static int m88e1011_get_tunable(struct phy_device *phydev,
1074 struct ethtool_tunable *tuna, void *data)
1077 case ETHTOOL_PHY_DOWNSHIFT:
1078 return m88e1011_get_downshift(phydev, data);
1084 static int m88e1011_set_tunable(struct phy_device *phydev,
1085 struct ethtool_tunable *tuna, const void *data)
1088 case ETHTOOL_PHY_DOWNSHIFT:
1089 return m88e1011_set_downshift(phydev, *(const u8 *)data);
1095 static int m88e1112_config_init(struct phy_device *phydev)
1099 err = m88e1011_set_downshift(phydev, 3);
1103 return m88e1111_config_init(phydev);
1106 static int m88e1111gbe_config_init(struct phy_device *phydev)
1110 err = m88e1111_set_downshift(phydev, 3);
1114 return m88e1111_config_init(phydev);
1117 static int marvell_1011gbe_config_init(struct phy_device *phydev)
1121 err = m88e1011_set_downshift(phydev, 3);
1125 return marvell_config_init(phydev);
1127 static int m88e1116r_config_init(struct phy_device *phydev)
1131 err = genphy_soft_reset(phydev);
1137 err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
1141 err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
1145 err = m88e1011_set_downshift(phydev, 8);
1149 if (phy_interface_is_rgmii(phydev)) {
1150 err = m88e1121_config_aneg_rgmii_delays(phydev);
1155 err = genphy_soft_reset(phydev);
1159 return marvell_config_init(phydev);
1162 static int m88e1318_config_init(struct phy_device *phydev)
1164 if (phy_interrupt_is_valid(phydev)) {
1165 int err = phy_modify_paged(
1166 phydev, MII_MARVELL_LED_PAGE,
1167 MII_88E1318S_PHY_LED_TCR,
1168 MII_88E1318S_PHY_LED_TCR_FORCE_INT,
1169 MII_88E1318S_PHY_LED_TCR_INTn_ENABLE |
1170 MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW);
1175 return marvell_config_init(phydev);
1178 static int m88e1510_config_init(struct phy_device *phydev)
1182 /* SGMII-to-Copper mode initialization */
1183 if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
1184 /* Select page 18 */
1185 err = marvell_set_page(phydev, 18);
1189 /* In reg 20, write MODE[2:0] = 0x1 (SGMII to Copper) */
1190 err = phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1,
1191 MII_88E1510_GEN_CTRL_REG_1_MODE_MASK,
1192 MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII);
1196 /* PHY reset is necessary after changing MODE[2:0] */
1197 err = phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1,
1198 MII_88E1510_GEN_CTRL_REG_1_RESET);
1202 /* Reset page selection */
1203 err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
1207 err = m88e1011_set_downshift(phydev, 3);
1211 return m88e1318_config_init(phydev);
1214 static int m88e1118_config_aneg(struct phy_device *phydev)
1218 err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
1222 err = genphy_config_aneg(phydev);
1226 return genphy_soft_reset(phydev);
1229 static int m88e1118_config_init(struct phy_device *phydev)
1234 /* Enable 1000 Mbit */
1235 err = phy_write_paged(phydev, MII_MARVELL_MSCR_PAGE,
1236 MII_88E1121_PHY_MSCR_REG, 0x1070);
1240 if (phy_interface_is_rgmii(phydev)) {
1241 err = m88e1121_config_aneg_rgmii_delays(phydev);
1246 /* Adjust LED Control */
1247 if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
1252 err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, 0x10, leds);
1256 err = marvell_of_reg_init(phydev);
1260 /* Reset page register */
1261 err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
1265 return genphy_soft_reset(phydev);
1268 static int m88e1149_config_init(struct phy_device *phydev)
1272 /* Change address */
1273 err = marvell_set_page(phydev, MII_MARVELL_MSCR_PAGE);
1277 /* Enable 1000 Mbit */
1278 err = phy_write(phydev, 0x15, 0x1048);
1282 err = marvell_of_reg_init(phydev);
1287 err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
1291 return genphy_soft_reset(phydev);
1294 static int m88e1145_config_init_rgmii(struct phy_device *phydev)
1298 err = m88e1111_config_init_rgmii_delays(phydev);
1302 if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
1303 err = phy_write(phydev, 0x1d, 0x0012);
1307 err = phy_modify(phydev, 0x1e, 0x0fc0,
1308 2 << 9 | /* 36 ohm */
1309 2 << 6); /* 39 ohm */
1313 err = phy_write(phydev, 0x1d, 0x3);
1317 err = phy_write(phydev, 0x1e, 0x8000);
1322 static int m88e1145_config_init_sgmii(struct phy_device *phydev)
1324 return m88e1111_config_init_hwcfg_mode(
1325 phydev, MII_M1111_HWCFG_MODE_SGMII_NO_CLK,
1326 MII_M1111_HWCFG_FIBER_COPPER_AUTO);
1329 static int m88e1145_config_init(struct phy_device *phydev)
1333 /* Take care of errata E0 & E1 */
1334 err = phy_write(phydev, 0x1d, 0x001b);
1338 err = phy_write(phydev, 0x1e, 0x418f);
1342 err = phy_write(phydev, 0x1d, 0x0016);
1346 err = phy_write(phydev, 0x1e, 0xa2da);
1350 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
1351 err = m88e1145_config_init_rgmii(phydev);
1356 if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
1357 err = m88e1145_config_init_sgmii(phydev);
1361 err = m88e1111_set_downshift(phydev, 3);
1365 err = marvell_of_reg_init(phydev);
1372 static int m88e1540_get_fld(struct phy_device *phydev, u8 *msecs)
1376 val = phy_read(phydev, MII_88E1540_COPPER_CTRL3);
1380 if (!(val & MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN)) {
1381 *msecs = ETHTOOL_PHY_FAST_LINK_DOWN_OFF;
1385 val = FIELD_GET(MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val);
1388 case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS:
1391 case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS:
1394 case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS:
1397 case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS:
1407 static int m88e1540_set_fld(struct phy_device *phydev, const u8 *msecs)
1409 struct ethtool_eee eee;
1412 if (*msecs == ETHTOOL_PHY_FAST_LINK_DOWN_OFF)
1413 return phy_clear_bits(phydev, MII_88E1540_COPPER_CTRL3,
1414 MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN);
1416 /* According to the Marvell data sheet EEE must be disabled for
1417 * Fast Link Down detection to work properly
1419 ret = phy_ethtool_get_eee(phydev, &eee);
1420 if (!ret && eee.eee_enabled) {
1421 phydev_warn(phydev, "Fast Link Down detection requires EEE to be disabled!\n");
1426 val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS;
1427 else if (*msecs <= 15)
1428 val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS;
1429 else if (*msecs <= 30)
1430 val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS;
1432 val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS;
1434 val = FIELD_PREP(MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val);
1436 ret = phy_modify(phydev, MII_88E1540_COPPER_CTRL3,
1437 MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val);
1441 return phy_set_bits(phydev, MII_88E1540_COPPER_CTRL3,
1442 MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN);
1445 static int m88e1540_get_tunable(struct phy_device *phydev,
1446 struct ethtool_tunable *tuna, void *data)
1449 case ETHTOOL_PHY_FAST_LINK_DOWN:
1450 return m88e1540_get_fld(phydev, data);
1451 case ETHTOOL_PHY_DOWNSHIFT:
1452 return m88e1011_get_downshift(phydev, data);
1458 static int m88e1540_set_tunable(struct phy_device *phydev,
1459 struct ethtool_tunable *tuna, const void *data)
1462 case ETHTOOL_PHY_FAST_LINK_DOWN:
1463 return m88e1540_set_fld(phydev, data);
1464 case ETHTOOL_PHY_DOWNSHIFT:
1465 return m88e1011_set_downshift(phydev, *(const u8 *)data);
1471 /* The VOD can be out of specification on link up. Poke an
1472 * undocumented register, in an undocumented page, with a magic value
1475 static int m88e6390_errata(struct phy_device *phydev)
1479 err = phy_write(phydev, MII_BMCR,
1480 BMCR_ANENABLE | BMCR_SPEED1000 | BMCR_FULLDPLX);
1484 usleep_range(300, 400);
1486 err = phy_write_paged(phydev, 0xf8, 0x08, 0x36);
1490 return genphy_soft_reset(phydev);
1493 static int m88e6390_config_aneg(struct phy_device *phydev)
1497 err = m88e6390_errata(phydev);
1501 return m88e1510_config_aneg(phydev);
1505 * fiber_lpa_mod_linkmode_lpa_t
1506 * @advertising: the linkmode advertisement settings
1507 * @lpa: value of the MII_LPA register for fiber link
1509 * A small helper function that translates MII_LPA bits to linkmode LP
1510 * advertisement settings. Other bits in advertising are left
1513 static void fiber_lpa_mod_linkmode_lpa_t(unsigned long *advertising, u32 lpa)
1515 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
1516 advertising, lpa & LPA_1000XHALF);
1518 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
1519 advertising, lpa & LPA_1000XFULL);
1522 static int marvell_read_status_page_an(struct phy_device *phydev,
1523 int fiber, int status)
1528 if (!(status & MII_M1011_PHY_STATUS_RESOLVED)) {
1533 if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
1534 phydev->duplex = DUPLEX_FULL;
1536 phydev->duplex = DUPLEX_HALF;
1538 switch (status & MII_M1011_PHY_STATUS_SPD_MASK) {
1539 case MII_M1011_PHY_STATUS_1000:
1540 phydev->speed = SPEED_1000;
1543 case MII_M1011_PHY_STATUS_100:
1544 phydev->speed = SPEED_100;
1548 phydev->speed = SPEED_10;
1553 err = genphy_read_lpa(phydev);
1557 phy_resolve_aneg_pause(phydev);
1559 lpa = phy_read(phydev, MII_LPA);
1563 /* The fiber link is only 1000M capable */
1564 fiber_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
1566 if (phydev->duplex == DUPLEX_FULL) {
1567 if (!(lpa & LPA_PAUSE_FIBER)) {
1569 phydev->asym_pause = 0;
1570 } else if ((lpa & LPA_PAUSE_ASYM_FIBER)) {
1572 phydev->asym_pause = 1;
1575 phydev->asym_pause = 0;
1583 /* marvell_read_status_page
1586 * Check the link, then figure out the current state
1587 * by comparing what we advertise with what the link partner
1588 * advertises. Start by checking the gigabit possibilities,
1589 * then move on to 10/100.
1591 static int marvell_read_status_page(struct phy_device *phydev, int page)
1597 status = phy_read(phydev, MII_M1011_PHY_STATUS);
1601 /* Use the generic register for copper link status,
1602 * and the PHY status register for fiber link status.
1604 if (page == MII_MARVELL_FIBER_PAGE) {
1605 phydev->link = !!(status & MII_M1011_PHY_STATUS_LINK);
1607 err = genphy_update_link(phydev);
1612 if (page == MII_MARVELL_FIBER_PAGE)
1617 linkmode_zero(phydev->lp_advertising);
1619 phydev->asym_pause = 0;
1620 phydev->speed = SPEED_UNKNOWN;
1621 phydev->duplex = DUPLEX_UNKNOWN;
1622 phydev->port = fiber ? PORT_FIBRE : PORT_TP;
1624 if (phydev->autoneg == AUTONEG_ENABLE)
1625 err = marvell_read_status_page_an(phydev, fiber, status);
1627 err = genphy_read_status_fixed(phydev);
1632 /* marvell_read_status
1634 * Some Marvell's phys have two modes: fiber and copper.
1635 * Both need status checked.
1637 * First, check the fiber link and status.
1638 * If the fiber link is down, check the copper link and status which
1639 * will be the default value if both link are down.
1641 static int marvell_read_status(struct phy_device *phydev)
1645 /* Check the fiber mode first */
1646 if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
1647 phydev->supported) &&
1648 phydev->interface != PHY_INTERFACE_MODE_SGMII) {
1649 err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
1653 err = marvell_read_status_page(phydev, MII_MARVELL_FIBER_PAGE);
1657 /* If the fiber link is up, it is the selected and
1658 * used link. In this case, we need to stay in the
1659 * fiber page. Please to be careful about that, avoid
1660 * to restore Copper page in other functions which
1661 * could break the behaviour for some fiber phy like
1667 /* If fiber link is down, check and save copper mode state */
1668 err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
1673 return marvell_read_status_page(phydev, MII_MARVELL_COPPER_PAGE);
1676 marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
1682 * Some Marvell's phys have two modes: fiber and copper.
1683 * Both need to be suspended
1685 static int marvell_suspend(struct phy_device *phydev)
1689 /* Suspend the fiber mode first */
1690 if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
1691 phydev->supported)) {
1692 err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
1696 /* With the page set, use the generic suspend */
1697 err = genphy_suspend(phydev);
1701 /* Then, the copper link */
1702 err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
1707 /* With the page set, use the generic suspend */
1708 return genphy_suspend(phydev);
1711 marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
1717 * Some Marvell's phys have two modes: fiber and copper.
1718 * Both need to be resumed
1720 static int marvell_resume(struct phy_device *phydev)
1724 /* Resume the fiber mode first */
1725 if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
1726 phydev->supported)) {
1727 err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
1731 /* With the page set, use the generic resume */
1732 err = genphy_resume(phydev);
1736 /* Then, the copper link */
1737 err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
1742 /* With the page set, use the generic resume */
1743 return genphy_resume(phydev);
1746 marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
1750 static int marvell_aneg_done(struct phy_device *phydev)
1752 int retval = phy_read(phydev, MII_M1011_PHY_STATUS);
1754 return (retval < 0) ? retval : (retval & MII_M1011_PHY_STATUS_RESOLVED);
1757 static void m88e1318_get_wol(struct phy_device *phydev,
1758 struct ethtool_wolinfo *wol)
1762 wol->supported = WAKE_MAGIC | WAKE_PHY;
1765 ret = phy_read_paged(phydev, MII_MARVELL_WOL_PAGE,
1766 MII_88E1318S_PHY_WOL_CTRL);
1770 if (ret & MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
1771 wol->wolopts |= WAKE_MAGIC;
1773 if (ret & MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE)
1774 wol->wolopts |= WAKE_PHY;
1777 static int m88e1318_set_wol(struct phy_device *phydev,
1778 struct ethtool_wolinfo *wol)
1780 int err = 0, oldpage;
1782 oldpage = phy_save_page(phydev);
1786 if (wol->wolopts & (WAKE_MAGIC | WAKE_PHY)) {
1787 /* Explicitly switch to page 0x00, just to be sure */
1788 err = marvell_write_page(phydev, MII_MARVELL_COPPER_PAGE);
1792 /* If WOL event happened once, the LED[2] interrupt pin
1793 * will not be cleared unless we reading the interrupt status
1794 * register. If interrupts are in use, the normal interrupt
1795 * handling will clear the WOL event. Clear the WOL event
1796 * before enabling it if !phy_interrupt_is_valid()
1798 if (!phy_interrupt_is_valid(phydev))
1799 __phy_read(phydev, MII_M1011_IEVENT);
1801 /* Enable the WOL interrupt */
1802 err = __phy_set_bits(phydev, MII_88E1318S_PHY_CSIER,
1803 MII_88E1318S_PHY_CSIER_WOL_EIE);
1807 err = marvell_write_page(phydev, MII_MARVELL_LED_PAGE);
1811 /* Setup LED[2] as interrupt pin (active low) */
1812 err = __phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
1813 MII_88E1318S_PHY_LED_TCR_FORCE_INT,
1814 MII_88E1318S_PHY_LED_TCR_INTn_ENABLE |
1815 MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW);
1820 if (wol->wolopts & WAKE_MAGIC) {
1821 err = marvell_write_page(phydev, MII_MARVELL_WOL_PAGE);
1825 /* Store the device address for the magic packet */
1826 err = __phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD2,
1827 ((phydev->attached_dev->dev_addr[5] << 8) |
1828 phydev->attached_dev->dev_addr[4]));
1831 err = __phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD1,
1832 ((phydev->attached_dev->dev_addr[3] << 8) |
1833 phydev->attached_dev->dev_addr[2]));
1836 err = __phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD0,
1837 ((phydev->attached_dev->dev_addr[1] << 8) |
1838 phydev->attached_dev->dev_addr[0]));
1842 /* Clear WOL status and enable magic packet matching */
1843 err = __phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
1844 MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS |
1845 MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE);
1849 err = marvell_write_page(phydev, MII_MARVELL_WOL_PAGE);
1853 /* Clear WOL status and disable magic packet matching */
1854 err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL,
1855 MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE,
1856 MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
1861 if (wol->wolopts & WAKE_PHY) {
1862 err = marvell_write_page(phydev, MII_MARVELL_WOL_PAGE);
1866 /* Clear WOL status and enable link up event */
1867 err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL, 0,
1868 MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS |
1869 MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE);
1873 err = marvell_write_page(phydev, MII_MARVELL_WOL_PAGE);
1877 /* Clear WOL status and disable link up event */
1878 err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL,
1879 MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE,
1880 MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
1886 return phy_restore_page(phydev, oldpage, err);
1889 static int marvell_get_sset_count(struct phy_device *phydev)
1891 if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
1893 return ARRAY_SIZE(marvell_hw_stats);
1895 return ARRAY_SIZE(marvell_hw_stats) - NB_FIBER_STATS;
1898 static void marvell_get_strings(struct phy_device *phydev, u8 *data)
1900 int count = marvell_get_sset_count(phydev);
1903 for (i = 0; i < count; i++) {
1904 strlcpy(data + i * ETH_GSTRING_LEN,
1905 marvell_hw_stats[i].string, ETH_GSTRING_LEN);
1909 static u64 marvell_get_stat(struct phy_device *phydev, int i)
1911 struct marvell_hw_stat stat = marvell_hw_stats[i];
1912 struct marvell_priv *priv = phydev->priv;
1916 val = phy_read_paged(phydev, stat.page, stat.reg);
1920 val = val & ((1 << stat.bits) - 1);
1921 priv->stats[i] += val;
1922 ret = priv->stats[i];
1928 static void marvell_get_stats(struct phy_device *phydev,
1929 struct ethtool_stats *stats, u64 *data)
1931 int count = marvell_get_sset_count(phydev);
1934 for (i = 0; i < count; i++)
1935 data[i] = marvell_get_stat(phydev, i);
1938 static int m88e1510_loopback(struct phy_device *phydev, bool enable)
1943 u16 bmcr_ctl = 0, mscr2_ctl = 0;
1945 if (phydev->speed == SPEED_1000)
1946 bmcr_ctl = BMCR_SPEED1000;
1947 else if (phydev->speed == SPEED_100)
1948 bmcr_ctl = BMCR_SPEED100;
1950 if (phydev->duplex == DUPLEX_FULL)
1951 bmcr_ctl |= BMCR_FULLDPLX;
1953 err = phy_write(phydev, MII_BMCR, bmcr_ctl);
1957 if (phydev->speed == SPEED_1000)
1958 mscr2_ctl = BMCR_SPEED1000;
1959 else if (phydev->speed == SPEED_100)
1960 mscr2_ctl = BMCR_SPEED100;
1962 err = phy_modify_paged(phydev, MII_MARVELL_MSCR_PAGE,
1963 MII_88E1510_MSCR_2, BMCR_SPEED1000 |
1964 BMCR_SPEED100, mscr2_ctl);
1968 /* Need soft reset to have speed configuration takes effect */
1969 err = genphy_soft_reset(phydev);
1973 /* FIXME: Based on trial and error test, it seem 1G need to have
1974 * delay between soft reset and loopback enablement.
1976 if (phydev->speed == SPEED_1000)
1979 return phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK,
1982 err = phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK, 0);
1986 return phy_config_aneg(phydev);
1990 static int marvell_vct5_wait_complete(struct phy_device *phydev)
1995 for (i = 0; i < 32; i++) {
1996 val = __phy_read(phydev, MII_VCT5_CTRL);
2000 if (val & MII_VCT5_CTRL_COMPLETE)
2004 phydev_err(phydev, "Timeout while waiting for cable test to finish\n");
2008 static int marvell_vct5_amplitude(struct phy_device *phydev, int pair)
2014 reg = MII_VCT5_TX_RX_MDI0_COUPLING + pair;
2015 val = __phy_read(phydev, reg);
2020 amplitude = (val & MII_VCT5_TX_RX_AMPLITUDE_MASK) >>
2021 MII_VCT5_TX_RX_AMPLITUDE_SHIFT;
2023 if (!(val & MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION))
2024 amplitude = -amplitude;
2026 return 1000 * amplitude / 128;
2029 static u32 marvell_vct5_distance2cm(int distance)
2031 return distance * 805 / 10;
2034 static u32 marvell_vct5_cm2distance(int cm)
2036 return cm * 10 / 805;
2039 static int marvell_vct5_amplitude_distance(struct phy_device *phydev,
2040 int distance, int pair)
2047 err = __phy_write(phydev, MII_VCT5_SAMPLE_POINT_DISTANCE,
2052 reg = MII_VCT5_CTRL_ENABLE |
2053 MII_VCT5_CTRL_TX_SAME_CHANNEL |
2054 MII_VCT5_CTRL_SAMPLES_DEFAULT |
2055 MII_VCT5_CTRL_SAMPLE_POINT |
2056 MII_VCT5_CTRL_PEEK_HYST_DEFAULT;
2057 err = __phy_write(phydev, MII_VCT5_CTRL, reg);
2061 err = marvell_vct5_wait_complete(phydev);
2065 for (i = 0; i < 4; i++) {
2066 if (pair != PHY_PAIR_ALL && i != pair)
2069 mV = marvell_vct5_amplitude(phydev, i);
2070 ethnl_cable_test_amplitude(phydev, i, mV);
2076 static int marvell_vct5_amplitude_graph(struct phy_device *phydev)
2078 struct marvell_priv *priv = phydev->priv;
2085 if (priv->first <= TDR_SHORT_CABLE_LENGTH)
2086 width = MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS;
2088 width = MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS;
2090 reg = MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV |
2091 MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN |
2092 MII_VCT5_TX_PULSE_CTRL_MAX_AMP | width;
2094 err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
2095 MII_VCT5_TX_PULSE_CTRL, reg);
2099 /* Reading the TDR data is very MDIO heavy. We need to optimize
2100 * access to keep the time to a minimum. So lock the bus once,
2101 * and don't release it until complete. We can then avoid having
2102 * to change the page for every access, greatly speeding things
2105 page = phy_select_page(phydev, MII_MARVELL_VCT5_PAGE);
2109 for (distance = priv->first;
2110 distance <= priv->last;
2111 distance += priv->step) {
2112 err = marvell_vct5_amplitude_distance(phydev, distance,
2117 if (distance > TDR_SHORT_CABLE_LENGTH &&
2118 width == MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS) {
2119 width = MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS;
2120 reg = MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV |
2121 MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN |
2122 MII_VCT5_TX_PULSE_CTRL_MAX_AMP | width;
2123 err = __phy_write(phydev, MII_VCT5_TX_PULSE_CTRL, reg);
2130 return phy_restore_page(phydev, page, err);
2133 static int marvell_cable_test_start_common(struct phy_device *phydev)
2135 int bmcr, bmsr, ret;
2137 /* If auto-negotiation is enabled, but not complete, the cable
2138 * test never completes. So disable auto-neg.
2140 bmcr = phy_read(phydev, MII_BMCR);
2144 bmsr = phy_read(phydev, MII_BMSR);
2149 if (bmcr & BMCR_ANENABLE) {
2150 ret = phy_clear_bits(phydev, MII_BMCR, BMCR_ANENABLE);
2153 ret = genphy_soft_reset(phydev);
2158 /* If the link is up, allow it some time to go down */
2159 if (bmsr & BMSR_LSTATUS)
2165 static int marvell_vct7_cable_test_start(struct phy_device *phydev)
2167 struct marvell_priv *priv = phydev->priv;
2170 ret = marvell_cable_test_start_common(phydev);
2174 priv->cable_test_tdr = false;
2176 /* Reset the VCT5 API control to defaults, otherwise
2177 * VCT7 does not work correctly.
2179 ret = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
2181 MII_VCT5_CTRL_TX_SAME_CHANNEL |
2182 MII_VCT5_CTRL_SAMPLES_DEFAULT |
2183 MII_VCT5_CTRL_MODE_MAXIMUM_PEEK |
2184 MII_VCT5_CTRL_PEEK_HYST_DEFAULT);
2188 ret = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
2189 MII_VCT5_SAMPLE_POINT_DISTANCE, 0);
2193 return phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE,
2195 MII_VCT7_CTRL_RUN_NOW |
2196 MII_VCT7_CTRL_CENTIMETERS);
2199 static int marvell_vct5_cable_test_tdr_start(struct phy_device *phydev,
2200 const struct phy_tdr_config *cfg)
2202 struct marvell_priv *priv = phydev->priv;
2205 priv->cable_test_tdr = true;
2206 priv->first = marvell_vct5_cm2distance(cfg->first);
2207 priv->last = marvell_vct5_cm2distance(cfg->last);
2208 priv->step = marvell_vct5_cm2distance(cfg->step);
2209 priv->pair = cfg->pair;
2211 if (priv->first > MII_VCT5_SAMPLE_POINT_DISTANCE_MAX)
2214 if (priv->last > MII_VCT5_SAMPLE_POINT_DISTANCE_MAX)
2218 ret = phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE,
2223 ret = marvell_cable_test_start_common(phydev);
2227 ret = ethnl_cable_test_pulse(phydev, 1000);
2231 return ethnl_cable_test_step(phydev,
2232 marvell_vct5_distance2cm(priv->first),
2233 marvell_vct5_distance2cm(priv->last),
2234 marvell_vct5_distance2cm(priv->step));
2237 static int marvell_vct7_distance_to_length(int distance, bool meter)
2245 static bool marvell_vct7_distance_valid(int result)
2248 case MII_VCT7_RESULTS_OPEN:
2249 case MII_VCT7_RESULTS_SAME_SHORT:
2250 case MII_VCT7_RESULTS_CROSS_SHORT:
2256 static int marvell_vct7_report_length(struct phy_device *phydev,
2257 int pair, bool meter)
2262 ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE,
2263 MII_VCT7_PAIR_0_DISTANCE + pair);
2267 length = marvell_vct7_distance_to_length(ret, meter);
2269 ethnl_cable_test_fault_length(phydev, pair, length);
2274 static int marvell_vct7_cable_test_report_trans(int result)
2277 case MII_VCT7_RESULTS_OK:
2278 return ETHTOOL_A_CABLE_RESULT_CODE_OK;
2279 case MII_VCT7_RESULTS_OPEN:
2280 return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
2281 case MII_VCT7_RESULTS_SAME_SHORT:
2282 return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
2283 case MII_VCT7_RESULTS_CROSS_SHORT:
2284 return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
2286 return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
2290 static int marvell_vct7_cable_test_report(struct phy_device *phydev)
2292 int pair0, pair1, pair2, pair3;
2296 ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE,
2301 pair3 = (ret & MII_VCT7_RESULTS_PAIR3_MASK) >>
2302 MII_VCT7_RESULTS_PAIR3_SHIFT;
2303 pair2 = (ret & MII_VCT7_RESULTS_PAIR2_MASK) >>
2304 MII_VCT7_RESULTS_PAIR2_SHIFT;
2305 pair1 = (ret & MII_VCT7_RESULTS_PAIR1_MASK) >>
2306 MII_VCT7_RESULTS_PAIR1_SHIFT;
2307 pair0 = (ret & MII_VCT7_RESULTS_PAIR0_MASK) >>
2308 MII_VCT7_RESULTS_PAIR0_SHIFT;
2310 ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
2311 marvell_vct7_cable_test_report_trans(pair0));
2312 ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
2313 marvell_vct7_cable_test_report_trans(pair1));
2314 ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
2315 marvell_vct7_cable_test_report_trans(pair2));
2316 ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
2317 marvell_vct7_cable_test_report_trans(pair3));
2319 ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE, MII_VCT7_CTRL);
2323 meter = ret & MII_VCT7_CTRL_METERS;
2325 if (marvell_vct7_distance_valid(pair0))
2326 marvell_vct7_report_length(phydev, 0, meter);
2327 if (marvell_vct7_distance_valid(pair1))
2328 marvell_vct7_report_length(phydev, 1, meter);
2329 if (marvell_vct7_distance_valid(pair2))
2330 marvell_vct7_report_length(phydev, 2, meter);
2331 if (marvell_vct7_distance_valid(pair3))
2332 marvell_vct7_report_length(phydev, 3, meter);
2337 static int marvell_vct7_cable_test_get_status(struct phy_device *phydev,
2340 struct marvell_priv *priv = phydev->priv;
2343 if (priv->cable_test_tdr) {
2344 ret = marvell_vct5_amplitude_graph(phydev);
2351 ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE,
2357 if (!(ret & MII_VCT7_CTRL_IN_PROGRESS)) {
2360 return marvell_vct7_cable_test_report(phydev);
2367 struct marvell_hwmon_ops {
2368 int (*config)(struct phy_device *phydev);
2369 int (*get_temp)(struct phy_device *phydev, long *temp);
2370 int (*get_temp_critical)(struct phy_device *phydev, long *temp);
2371 int (*set_temp_critical)(struct phy_device *phydev, long temp);
2372 int (*get_temp_alarm)(struct phy_device *phydev, long *alarm);
2375 static const struct marvell_hwmon_ops *
2376 to_marvell_hwmon_ops(const struct phy_device *phydev)
2378 return phydev->drv->driver_data;
2381 static int m88e1121_get_temp(struct phy_device *phydev, long *temp)
2389 oldpage = phy_select_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
2393 /* Enable temperature sensor */
2394 ret = __phy_read(phydev, MII_88E1121_MISC_TEST);
2398 ret = __phy_write(phydev, MII_88E1121_MISC_TEST,
2399 ret | MII_88E1121_MISC_TEST_TEMP_SENSOR_EN);
2403 /* Wait for temperature to stabilize */
2404 usleep_range(10000, 12000);
2406 val = __phy_read(phydev, MII_88E1121_MISC_TEST);
2412 /* Disable temperature sensor */
2413 ret = __phy_write(phydev, MII_88E1121_MISC_TEST,
2414 ret & ~MII_88E1121_MISC_TEST_TEMP_SENSOR_EN);
2418 *temp = ((val & MII_88E1121_MISC_TEST_TEMP_MASK) - 5) * 5000;
2421 return phy_restore_page(phydev, oldpage, ret);
2424 static int m88e1510_get_temp(struct phy_device *phydev, long *temp)
2430 ret = phy_read_paged(phydev, MII_MARVELL_MISC_TEST_PAGE,
2431 MII_88E1510_TEMP_SENSOR);
2435 *temp = ((ret & MII_88E1510_TEMP_SENSOR_MASK) - 25) * 1000;
2440 static int m88e1510_get_temp_critical(struct phy_device *phydev, long *temp)
2446 ret = phy_read_paged(phydev, MII_MARVELL_MISC_TEST_PAGE,
2447 MII_88E1121_MISC_TEST);
2451 *temp = (((ret & MII_88E1510_MISC_TEST_TEMP_THRESHOLD_MASK) >>
2452 MII_88E1510_MISC_TEST_TEMP_THRESHOLD_SHIFT) * 5) - 25;
2459 static int m88e1510_set_temp_critical(struct phy_device *phydev, long temp)
2462 temp = clamp_val(DIV_ROUND_CLOSEST(temp, 5) + 5, 0, 0x1f);
2464 return phy_modify_paged(phydev, MII_MARVELL_MISC_TEST_PAGE,
2465 MII_88E1121_MISC_TEST,
2466 MII_88E1510_MISC_TEST_TEMP_THRESHOLD_MASK,
2467 temp << MII_88E1510_MISC_TEST_TEMP_THRESHOLD_SHIFT);
2470 static int m88e1510_get_temp_alarm(struct phy_device *phydev, long *alarm)
2476 ret = phy_read_paged(phydev, MII_MARVELL_MISC_TEST_PAGE,
2477 MII_88E1121_MISC_TEST);
2481 *alarm = !!(ret & MII_88E1510_MISC_TEST_TEMP_IRQ);
2486 static int m88e6390_get_temp(struct phy_device *phydev, long *temp)
2495 oldpage = phy_select_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
2499 /* Enable temperature sensor */
2500 ret = __phy_read(phydev, MII_88E6390_MISC_TEST);
2504 ret &= ~MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK;
2505 ret |= MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE_SAMPLE_1S;
2507 ret = __phy_write(phydev, MII_88E6390_MISC_TEST, ret);
2511 /* Wait for temperature to stabilize */
2512 usleep_range(10000, 12000);
2514 /* Reading the temperature sense has an errata. You need to read
2515 * a number of times and take an average.
2517 for (i = 0; i < MII_88E6390_TEMP_SENSOR_SAMPLES; i++) {
2518 ret = __phy_read(phydev, MII_88E6390_TEMP_SENSOR);
2521 sum += ret & MII_88E6390_TEMP_SENSOR_MASK;
2524 sum /= MII_88E6390_TEMP_SENSOR_SAMPLES;
2525 *temp = (sum - 75) * 1000;
2527 /* Disable temperature sensor */
2528 ret = __phy_read(phydev, MII_88E6390_MISC_TEST);
2532 ret = ret & ~MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK;
2533 ret |= MII_88E6390_MISC_TEST_TEMP_SENSOR_DISABLE;
2535 ret = __phy_write(phydev, MII_88E6390_MISC_TEST, ret);
2538 phy_restore_page(phydev, oldpage, ret);
2543 static int m88e6393_get_temp(struct phy_device *phydev, long *temp)
2547 err = m88e1510_get_temp(phydev, temp);
2549 /* 88E1510 measures T + 25, while the PHY on 88E6393X switch
2550 * T + 75, so we have to subtract another 50
2557 static int m88e6393_get_temp_critical(struct phy_device *phydev, long *temp)
2563 ret = phy_read_paged(phydev, MII_MARVELL_MISC_TEST_PAGE,
2564 MII_88E6390_TEMP_SENSOR);
2568 *temp = (((ret & MII_88E6393_TEMP_SENSOR_THRESHOLD_MASK) >>
2569 MII_88E6393_TEMP_SENSOR_THRESHOLD_SHIFT) - 75) * 1000;
2574 static int m88e6393_set_temp_critical(struct phy_device *phydev, long temp)
2576 temp = (temp / 1000) + 75;
2578 return phy_modify_paged(phydev, MII_MARVELL_MISC_TEST_PAGE,
2579 MII_88E6390_TEMP_SENSOR,
2580 MII_88E6393_TEMP_SENSOR_THRESHOLD_MASK,
2581 temp << MII_88E6393_TEMP_SENSOR_THRESHOLD_SHIFT);
2584 static int m88e6393_hwmon_config(struct phy_device *phydev)
2588 err = m88e6393_set_temp_critical(phydev, 100000);
2592 return phy_modify_paged(phydev, MII_MARVELL_MISC_TEST_PAGE,
2593 MII_88E6390_MISC_TEST,
2594 MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK |
2595 MII_88E6393_MISC_TEST_SAMPLES_MASK |
2596 MII_88E6393_MISC_TEST_RATE_MASK,
2597 MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE |
2598 MII_88E6393_MISC_TEST_SAMPLES_2048 |
2599 MII_88E6393_MISC_TEST_RATE_2_3MS);
2602 static int marvell_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
2603 u32 attr, int channel, long *temp)
2605 struct phy_device *phydev = dev_get_drvdata(dev);
2606 const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev);
2607 int err = -EOPNOTSUPP;
2610 case hwmon_temp_input:
2612 err = ops->get_temp(phydev, temp);
2614 case hwmon_temp_crit:
2615 if (ops->get_temp_critical)
2616 err = ops->get_temp_critical(phydev, temp);
2618 case hwmon_temp_max_alarm:
2619 if (ops->get_temp_alarm)
2620 err = ops->get_temp_alarm(phydev, temp);
2627 static int marvell_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
2628 u32 attr, int channel, long temp)
2630 struct phy_device *phydev = dev_get_drvdata(dev);
2631 const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev);
2632 int err = -EOPNOTSUPP;
2635 case hwmon_temp_crit:
2636 if (ops->set_temp_critical)
2637 err = ops->set_temp_critical(phydev, temp);
2644 static umode_t marvell_hwmon_is_visible(const void *data,
2645 enum hwmon_sensor_types type,
2646 u32 attr, int channel)
2648 const struct phy_device *phydev = data;
2649 const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev);
2651 if (type != hwmon_temp)
2655 case hwmon_temp_input:
2656 return ops->get_temp ? 0444 : 0;
2657 case hwmon_temp_max_alarm:
2658 return ops->get_temp_alarm ? 0444 : 0;
2659 case hwmon_temp_crit:
2660 return (ops->get_temp_critical ? 0444 : 0) |
2661 (ops->set_temp_critical ? 0200 : 0);
2667 static u32 marvell_hwmon_chip_config[] = {
2668 HWMON_C_REGISTER_TZ,
2672 static const struct hwmon_channel_info marvell_hwmon_chip = {
2674 .config = marvell_hwmon_chip_config,
2677 /* we can define HWMON_T_CRIT and HWMON_T_MAX_ALARM even though these are not
2678 * defined for all PHYs, because the hwmon code checks whether the attributes
2679 * exists via the .is_visible method
2681 static u32 marvell_hwmon_temp_config[] = {
2682 HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_MAX_ALARM,
2686 static const struct hwmon_channel_info marvell_hwmon_temp = {
2688 .config = marvell_hwmon_temp_config,
2691 static const struct hwmon_channel_info *marvell_hwmon_info[] = {
2692 &marvell_hwmon_chip,
2693 &marvell_hwmon_temp,
2697 static const struct hwmon_ops marvell_hwmon_hwmon_ops = {
2698 .is_visible = marvell_hwmon_is_visible,
2699 .read = marvell_hwmon_read,
2700 .write = marvell_hwmon_write,
2703 static const struct hwmon_chip_info marvell_hwmon_chip_info = {
2704 .ops = &marvell_hwmon_hwmon_ops,
2705 .info = marvell_hwmon_info,
2708 static int marvell_hwmon_name(struct phy_device *phydev)
2710 struct marvell_priv *priv = phydev->priv;
2711 struct device *dev = &phydev->mdio.dev;
2712 const char *devname = dev_name(dev);
2713 size_t len = strlen(devname);
2716 priv->hwmon_name = devm_kzalloc(dev, len, GFP_KERNEL);
2717 if (!priv->hwmon_name)
2720 for (i = j = 0; i < len && devname[i]; i++) {
2721 if (isalnum(devname[i]))
2722 priv->hwmon_name[j++] = devname[i];
2728 static int marvell_hwmon_probe(struct phy_device *phydev)
2730 const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev);
2731 struct marvell_priv *priv = phydev->priv;
2732 struct device *dev = &phydev->mdio.dev;
2738 err = marvell_hwmon_name(phydev);
2742 priv->hwmon_dev = devm_hwmon_device_register_with_info(
2743 dev, priv->hwmon_name, phydev, &marvell_hwmon_chip_info, NULL);
2744 if (IS_ERR(priv->hwmon_dev))
2745 return PTR_ERR(priv->hwmon_dev);
2748 err = ops->config(phydev);
2753 static const struct marvell_hwmon_ops m88e1121_hwmon_ops = {
2754 .get_temp = m88e1121_get_temp,
2757 static const struct marvell_hwmon_ops m88e1510_hwmon_ops = {
2758 .get_temp = m88e1510_get_temp,
2759 .get_temp_critical = m88e1510_get_temp_critical,
2760 .set_temp_critical = m88e1510_set_temp_critical,
2761 .get_temp_alarm = m88e1510_get_temp_alarm,
2764 static const struct marvell_hwmon_ops m88e6390_hwmon_ops = {
2765 .get_temp = m88e6390_get_temp,
2768 static const struct marvell_hwmon_ops m88e6393_hwmon_ops = {
2769 .config = m88e6393_hwmon_config,
2770 .get_temp = m88e6393_get_temp,
2771 .get_temp_critical = m88e6393_get_temp_critical,
2772 .set_temp_critical = m88e6393_set_temp_critical,
2773 .get_temp_alarm = m88e1510_get_temp_alarm,
2776 #define DEF_MARVELL_HWMON_OPS(s) (&(s))
2780 #define DEF_MARVELL_HWMON_OPS(s) NULL
2782 static int marvell_hwmon_probe(struct phy_device *phydev)
2788 static int marvell_probe(struct phy_device *phydev)
2790 struct marvell_priv *priv;
2792 priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
2796 phydev->priv = priv;
2798 return marvell_hwmon_probe(phydev);
2801 static int m88e1510_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
2803 struct phy_device *phydev = upstream;
2804 phy_interface_t interface;
2810 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
2812 dev = &phydev->mdio.dev;
2814 sfp_parse_support(phydev->sfp_bus, id, supported);
2815 interface = sfp_select_interface(phydev->sfp_bus, supported);
2817 dev_info(dev, "%s SFP module inserted\n", phy_modes(interface));
2819 switch (interface) {
2820 case PHY_INTERFACE_MODE_1000BASEX:
2821 mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_1000X;
2824 case PHY_INTERFACE_MODE_100BASEX:
2825 mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_100FX;
2828 case PHY_INTERFACE_MODE_SGMII:
2829 mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII;
2833 dev_err(dev, "Incompatible SFP module inserted\n");
2838 oldpage = phy_select_page(phydev, MII_MARVELL_MODE_PAGE);
2842 ret = __phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1,
2843 MII_88E1510_GEN_CTRL_REG_1_MODE_MASK, mode);
2847 ret = __phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1,
2848 MII_88E1510_GEN_CTRL_REG_1_RESET);
2851 return phy_restore_page(phydev, oldpage, ret);
2854 static void m88e1510_sfp_remove(void *upstream)
2856 struct phy_device *phydev = upstream;
2860 oldpage = phy_select_page(phydev, MII_MARVELL_MODE_PAGE);
2864 ret = __phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1,
2865 MII_88E1510_GEN_CTRL_REG_1_MODE_MASK,
2866 MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII);
2870 ret = __phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1,
2871 MII_88E1510_GEN_CTRL_REG_1_RESET);
2874 phy_restore_page(phydev, oldpage, ret);
2877 static const struct sfp_upstream_ops m88e1510_sfp_ops = {
2878 .module_insert = m88e1510_sfp_insert,
2879 .module_remove = m88e1510_sfp_remove,
2880 .attach = phy_sfp_attach,
2881 .detach = phy_sfp_detach,
2884 static int m88e1510_probe(struct phy_device *phydev)
2888 err = marvell_probe(phydev);
2892 return phy_sfp_probe(phydev, &m88e1510_sfp_ops);
2895 static struct phy_driver marvell_drivers[] = {
2897 .phy_id = MARVELL_PHY_ID_88E1101,
2898 .phy_id_mask = MARVELL_PHY_ID_MASK,
2899 .name = "Marvell 88E1101",
2900 /* PHY_GBIT_FEATURES */
2901 .probe = marvell_probe,
2902 .config_init = marvell_config_init,
2903 .config_aneg = m88e1101_config_aneg,
2904 .config_intr = marvell_config_intr,
2905 .handle_interrupt = marvell_handle_interrupt,
2906 .resume = genphy_resume,
2907 .suspend = genphy_suspend,
2908 .read_page = marvell_read_page,
2909 .write_page = marvell_write_page,
2910 .get_sset_count = marvell_get_sset_count,
2911 .get_strings = marvell_get_strings,
2912 .get_stats = marvell_get_stats,
2915 .phy_id = MARVELL_PHY_ID_88E1112,
2916 .phy_id_mask = MARVELL_PHY_ID_MASK,
2917 .name = "Marvell 88E1112",
2918 /* PHY_GBIT_FEATURES */
2919 .probe = marvell_probe,
2920 .config_init = m88e1112_config_init,
2921 .config_aneg = marvell_config_aneg,
2922 .config_intr = marvell_config_intr,
2923 .handle_interrupt = marvell_handle_interrupt,
2924 .resume = genphy_resume,
2925 .suspend = genphy_suspend,
2926 .read_page = marvell_read_page,
2927 .write_page = marvell_write_page,
2928 .get_sset_count = marvell_get_sset_count,
2929 .get_strings = marvell_get_strings,
2930 .get_stats = marvell_get_stats,
2931 .get_tunable = m88e1011_get_tunable,
2932 .set_tunable = m88e1011_set_tunable,
2935 .phy_id = MARVELL_PHY_ID_88E1111,
2936 .phy_id_mask = MARVELL_PHY_ID_MASK,
2937 .name = "Marvell 88E1111",
2938 /* PHY_GBIT_FEATURES */
2939 .probe = marvell_probe,
2940 .config_init = m88e1111gbe_config_init,
2941 .config_aneg = m88e1111_config_aneg,
2942 .read_status = marvell_read_status,
2943 .config_intr = marvell_config_intr,
2944 .handle_interrupt = marvell_handle_interrupt,
2945 .resume = genphy_resume,
2946 .suspend = genphy_suspend,
2947 .read_page = marvell_read_page,
2948 .write_page = marvell_write_page,
2949 .get_sset_count = marvell_get_sset_count,
2950 .get_strings = marvell_get_strings,
2951 .get_stats = marvell_get_stats,
2952 .get_tunable = m88e1111_get_tunable,
2953 .set_tunable = m88e1111_set_tunable,
2956 .phy_id = MARVELL_PHY_ID_88E1111_FINISAR,
2957 .phy_id_mask = MARVELL_PHY_ID_MASK,
2958 .name = "Marvell 88E1111 (Finisar)",
2959 /* PHY_GBIT_FEATURES */
2960 .probe = marvell_probe,
2961 .config_init = m88e1111gbe_config_init,
2962 .config_aneg = m88e1111_config_aneg,
2963 .read_status = marvell_read_status,
2964 .config_intr = marvell_config_intr,
2965 .handle_interrupt = marvell_handle_interrupt,
2966 .resume = genphy_resume,
2967 .suspend = genphy_suspend,
2968 .read_page = marvell_read_page,
2969 .write_page = marvell_write_page,
2970 .get_sset_count = marvell_get_sset_count,
2971 .get_strings = marvell_get_strings,
2972 .get_stats = marvell_get_stats,
2973 .get_tunable = m88e1111_get_tunable,
2974 .set_tunable = m88e1111_set_tunable,
2977 .phy_id = MARVELL_PHY_ID_88E1118,
2978 .phy_id_mask = MARVELL_PHY_ID_MASK,
2979 .name = "Marvell 88E1118",
2980 /* PHY_GBIT_FEATURES */
2981 .probe = marvell_probe,
2982 .config_init = m88e1118_config_init,
2983 .config_aneg = m88e1118_config_aneg,
2984 .config_intr = marvell_config_intr,
2985 .handle_interrupt = marvell_handle_interrupt,
2986 .resume = genphy_resume,
2987 .suspend = genphy_suspend,
2988 .read_page = marvell_read_page,
2989 .write_page = marvell_write_page,
2990 .get_sset_count = marvell_get_sset_count,
2991 .get_strings = marvell_get_strings,
2992 .get_stats = marvell_get_stats,
2995 .phy_id = MARVELL_PHY_ID_88E1121R,
2996 .phy_id_mask = MARVELL_PHY_ID_MASK,
2997 .name = "Marvell 88E1121R",
2998 .driver_data = DEF_MARVELL_HWMON_OPS(m88e1121_hwmon_ops),
2999 /* PHY_GBIT_FEATURES */
3000 .probe = marvell_probe,
3001 .config_init = marvell_1011gbe_config_init,
3002 .config_aneg = m88e1121_config_aneg,
3003 .read_status = marvell_read_status,
3004 .config_intr = marvell_config_intr,
3005 .handle_interrupt = marvell_handle_interrupt,
3006 .resume = genphy_resume,
3007 .suspend = genphy_suspend,
3008 .read_page = marvell_read_page,
3009 .write_page = marvell_write_page,
3010 .get_sset_count = marvell_get_sset_count,
3011 .get_strings = marvell_get_strings,
3012 .get_stats = marvell_get_stats,
3013 .get_tunable = m88e1011_get_tunable,
3014 .set_tunable = m88e1011_set_tunable,
3017 .phy_id = MARVELL_PHY_ID_88E1318S,
3018 .phy_id_mask = MARVELL_PHY_ID_MASK,
3019 .name = "Marvell 88E1318S",
3020 /* PHY_GBIT_FEATURES */
3021 .probe = marvell_probe,
3022 .config_init = m88e1318_config_init,
3023 .config_aneg = m88e1318_config_aneg,
3024 .read_status = marvell_read_status,
3025 .config_intr = marvell_config_intr,
3026 .handle_interrupt = marvell_handle_interrupt,
3027 .get_wol = m88e1318_get_wol,
3028 .set_wol = m88e1318_set_wol,
3029 .resume = genphy_resume,
3030 .suspend = genphy_suspend,
3031 .read_page = marvell_read_page,
3032 .write_page = marvell_write_page,
3033 .get_sset_count = marvell_get_sset_count,
3034 .get_strings = marvell_get_strings,
3035 .get_stats = marvell_get_stats,
3038 .phy_id = MARVELL_PHY_ID_88E1145,
3039 .phy_id_mask = MARVELL_PHY_ID_MASK,
3040 .name = "Marvell 88E1145",
3041 /* PHY_GBIT_FEATURES */
3042 .probe = marvell_probe,
3043 .config_init = m88e1145_config_init,
3044 .config_aneg = m88e1101_config_aneg,
3045 .config_intr = marvell_config_intr,
3046 .handle_interrupt = marvell_handle_interrupt,
3047 .resume = genphy_resume,
3048 .suspend = genphy_suspend,
3049 .read_page = marvell_read_page,
3050 .write_page = marvell_write_page,
3051 .get_sset_count = marvell_get_sset_count,
3052 .get_strings = marvell_get_strings,
3053 .get_stats = marvell_get_stats,
3054 .get_tunable = m88e1111_get_tunable,
3055 .set_tunable = m88e1111_set_tunable,
3058 .phy_id = MARVELL_PHY_ID_88E1149R,
3059 .phy_id_mask = MARVELL_PHY_ID_MASK,
3060 .name = "Marvell 88E1149R",
3061 /* PHY_GBIT_FEATURES */
3062 .probe = marvell_probe,
3063 .config_init = m88e1149_config_init,
3064 .config_aneg = m88e1118_config_aneg,
3065 .config_intr = marvell_config_intr,
3066 .handle_interrupt = marvell_handle_interrupt,
3067 .resume = genphy_resume,
3068 .suspend = genphy_suspend,
3069 .read_page = marvell_read_page,
3070 .write_page = marvell_write_page,
3071 .get_sset_count = marvell_get_sset_count,
3072 .get_strings = marvell_get_strings,
3073 .get_stats = marvell_get_stats,
3076 .phy_id = MARVELL_PHY_ID_88E1240,
3077 .phy_id_mask = MARVELL_PHY_ID_MASK,
3078 .name = "Marvell 88E1240",
3079 /* PHY_GBIT_FEATURES */
3080 .probe = marvell_probe,
3081 .config_init = m88e1112_config_init,
3082 .config_aneg = marvell_config_aneg,
3083 .config_intr = marvell_config_intr,
3084 .handle_interrupt = marvell_handle_interrupt,
3085 .resume = genphy_resume,
3086 .suspend = genphy_suspend,
3087 .read_page = marvell_read_page,
3088 .write_page = marvell_write_page,
3089 .get_sset_count = marvell_get_sset_count,
3090 .get_strings = marvell_get_strings,
3091 .get_stats = marvell_get_stats,
3092 .get_tunable = m88e1011_get_tunable,
3093 .set_tunable = m88e1011_set_tunable,
3096 .phy_id = MARVELL_PHY_ID_88E1116R,
3097 .phy_id_mask = MARVELL_PHY_ID_MASK,
3098 .name = "Marvell 88E1116R",
3099 /* PHY_GBIT_FEATURES */
3100 .probe = marvell_probe,
3101 .config_init = m88e1116r_config_init,
3102 .config_intr = marvell_config_intr,
3103 .handle_interrupt = marvell_handle_interrupt,
3104 .resume = genphy_resume,
3105 .suspend = genphy_suspend,
3106 .read_page = marvell_read_page,
3107 .write_page = marvell_write_page,
3108 .get_sset_count = marvell_get_sset_count,
3109 .get_strings = marvell_get_strings,
3110 .get_stats = marvell_get_stats,
3111 .get_tunable = m88e1011_get_tunable,
3112 .set_tunable = m88e1011_set_tunable,
3115 .phy_id = MARVELL_PHY_ID_88E1510,
3116 .phy_id_mask = MARVELL_PHY_ID_MASK,
3117 .name = "Marvell 88E1510",
3118 .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
3119 .features = PHY_GBIT_FIBRE_FEATURES,
3120 .flags = PHY_POLL_CABLE_TEST,
3121 .probe = m88e1510_probe,
3122 .config_init = m88e1510_config_init,
3123 .config_aneg = m88e1510_config_aneg,
3124 .read_status = marvell_read_status,
3125 .config_intr = marvell_config_intr,
3126 .handle_interrupt = marvell_handle_interrupt,
3127 .get_wol = m88e1318_get_wol,
3128 .set_wol = m88e1318_set_wol,
3129 .resume = marvell_resume,
3130 .suspend = marvell_suspend,
3131 .read_page = marvell_read_page,
3132 .write_page = marvell_write_page,
3133 .get_sset_count = marvell_get_sset_count,
3134 .get_strings = marvell_get_strings,
3135 .get_stats = marvell_get_stats,
3136 .set_loopback = m88e1510_loopback,
3137 .get_tunable = m88e1011_get_tunable,
3138 .set_tunable = m88e1011_set_tunable,
3139 .cable_test_start = marvell_vct7_cable_test_start,
3140 .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
3141 .cable_test_get_status = marvell_vct7_cable_test_get_status,
3144 .phy_id = MARVELL_PHY_ID_88E1540,
3145 .phy_id_mask = MARVELL_PHY_ID_MASK,
3146 .name = "Marvell 88E1540",
3147 .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
3148 /* PHY_GBIT_FEATURES */
3149 .flags = PHY_POLL_CABLE_TEST,
3150 .probe = marvell_probe,
3151 .config_init = marvell_1011gbe_config_init,
3152 .config_aneg = m88e1510_config_aneg,
3153 .read_status = marvell_read_status,
3154 .config_intr = marvell_config_intr,
3155 .handle_interrupt = marvell_handle_interrupt,
3156 .resume = genphy_resume,
3157 .suspend = genphy_suspend,
3158 .read_page = marvell_read_page,
3159 .write_page = marvell_write_page,
3160 .get_sset_count = marvell_get_sset_count,
3161 .get_strings = marvell_get_strings,
3162 .get_stats = marvell_get_stats,
3163 .get_tunable = m88e1540_get_tunable,
3164 .set_tunable = m88e1540_set_tunable,
3165 .cable_test_start = marvell_vct7_cable_test_start,
3166 .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
3167 .cable_test_get_status = marvell_vct7_cable_test_get_status,
3170 .phy_id = MARVELL_PHY_ID_88E1545,
3171 .phy_id_mask = MARVELL_PHY_ID_MASK,
3172 .name = "Marvell 88E1545",
3173 .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
3174 .probe = marvell_probe,
3175 /* PHY_GBIT_FEATURES */
3176 .flags = PHY_POLL_CABLE_TEST,
3177 .config_init = marvell_1011gbe_config_init,
3178 .config_aneg = m88e1510_config_aneg,
3179 .read_status = marvell_read_status,
3180 .config_intr = marvell_config_intr,
3181 .handle_interrupt = marvell_handle_interrupt,
3182 .resume = genphy_resume,
3183 .suspend = genphy_suspend,
3184 .read_page = marvell_read_page,
3185 .write_page = marvell_write_page,
3186 .get_sset_count = marvell_get_sset_count,
3187 .get_strings = marvell_get_strings,
3188 .get_stats = marvell_get_stats,
3189 .get_tunable = m88e1540_get_tunable,
3190 .set_tunable = m88e1540_set_tunable,
3191 .cable_test_start = marvell_vct7_cable_test_start,
3192 .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
3193 .cable_test_get_status = marvell_vct7_cable_test_get_status,
3196 .phy_id = MARVELL_PHY_ID_88E3016,
3197 .phy_id_mask = MARVELL_PHY_ID_MASK,
3198 .name = "Marvell 88E3016",
3199 /* PHY_BASIC_FEATURES */
3200 .probe = marvell_probe,
3201 .config_init = m88e3016_config_init,
3202 .aneg_done = marvell_aneg_done,
3203 .read_status = marvell_read_status,
3204 .config_intr = marvell_config_intr,
3205 .handle_interrupt = marvell_handle_interrupt,
3206 .resume = genphy_resume,
3207 .suspend = genphy_suspend,
3208 .read_page = marvell_read_page,
3209 .write_page = marvell_write_page,
3210 .get_sset_count = marvell_get_sset_count,
3211 .get_strings = marvell_get_strings,
3212 .get_stats = marvell_get_stats,
3215 .phy_id = MARVELL_PHY_ID_88E6341_FAMILY,
3216 .phy_id_mask = MARVELL_PHY_ID_MASK,
3217 .name = "Marvell 88E6341 Family",
3218 .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
3219 /* PHY_GBIT_FEATURES */
3220 .flags = PHY_POLL_CABLE_TEST,
3221 .probe = marvell_probe,
3222 .config_init = marvell_1011gbe_config_init,
3223 .config_aneg = m88e6390_config_aneg,
3224 .read_status = marvell_read_status,
3225 .config_intr = marvell_config_intr,
3226 .handle_interrupt = marvell_handle_interrupt,
3227 .resume = genphy_resume,
3228 .suspend = genphy_suspend,
3229 .read_page = marvell_read_page,
3230 .write_page = marvell_write_page,
3231 .get_sset_count = marvell_get_sset_count,
3232 .get_strings = marvell_get_strings,
3233 .get_stats = marvell_get_stats,
3234 .get_tunable = m88e1540_get_tunable,
3235 .set_tunable = m88e1540_set_tunable,
3236 .cable_test_start = marvell_vct7_cable_test_start,
3237 .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
3238 .cable_test_get_status = marvell_vct7_cable_test_get_status,
3241 .phy_id = MARVELL_PHY_ID_88E6390_FAMILY,
3242 .phy_id_mask = MARVELL_PHY_ID_MASK,
3243 .name = "Marvell 88E6390 Family",
3244 .driver_data = DEF_MARVELL_HWMON_OPS(m88e6390_hwmon_ops),
3245 /* PHY_GBIT_FEATURES */
3246 .flags = PHY_POLL_CABLE_TEST,
3247 .probe = marvell_probe,
3248 .config_init = marvell_1011gbe_config_init,
3249 .config_aneg = m88e6390_config_aneg,
3250 .read_status = marvell_read_status,
3251 .config_intr = marvell_config_intr,
3252 .handle_interrupt = marvell_handle_interrupt,
3253 .resume = genphy_resume,
3254 .suspend = genphy_suspend,
3255 .read_page = marvell_read_page,
3256 .write_page = marvell_write_page,
3257 .get_sset_count = marvell_get_sset_count,
3258 .get_strings = marvell_get_strings,
3259 .get_stats = marvell_get_stats,
3260 .get_tunable = m88e1540_get_tunable,
3261 .set_tunable = m88e1540_set_tunable,
3262 .cable_test_start = marvell_vct7_cable_test_start,
3263 .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
3264 .cable_test_get_status = marvell_vct7_cable_test_get_status,
3267 .phy_id = MARVELL_PHY_ID_88E6393_FAMILY,
3268 .phy_id_mask = MARVELL_PHY_ID_MASK,
3269 .name = "Marvell 88E6393 Family",
3270 .driver_data = DEF_MARVELL_HWMON_OPS(m88e6393_hwmon_ops),
3271 /* PHY_GBIT_FEATURES */
3272 .flags = PHY_POLL_CABLE_TEST,
3273 .probe = marvell_probe,
3274 .config_init = marvell_1011gbe_config_init,
3275 .config_aneg = m88e1510_config_aneg,
3276 .read_status = marvell_read_status,
3277 .config_intr = marvell_config_intr,
3278 .handle_interrupt = marvell_handle_interrupt,
3279 .resume = genphy_resume,
3280 .suspend = genphy_suspend,
3281 .read_page = marvell_read_page,
3282 .write_page = marvell_write_page,
3283 .get_sset_count = marvell_get_sset_count,
3284 .get_strings = marvell_get_strings,
3285 .get_stats = marvell_get_stats,
3286 .get_tunable = m88e1540_get_tunable,
3287 .set_tunable = m88e1540_set_tunable,
3288 .cable_test_start = marvell_vct7_cable_test_start,
3289 .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
3290 .cable_test_get_status = marvell_vct7_cable_test_get_status,
3293 .phy_id = MARVELL_PHY_ID_88E1340S,
3294 .phy_id_mask = MARVELL_PHY_ID_MASK,
3295 .name = "Marvell 88E1340S",
3296 .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
3297 .probe = marvell_probe,
3298 /* PHY_GBIT_FEATURES */
3299 .config_init = marvell_1011gbe_config_init,
3300 .config_aneg = m88e1510_config_aneg,
3301 .read_status = marvell_read_status,
3302 .config_intr = marvell_config_intr,
3303 .handle_interrupt = marvell_handle_interrupt,
3304 .resume = genphy_resume,
3305 .suspend = genphy_suspend,
3306 .read_page = marvell_read_page,
3307 .write_page = marvell_write_page,
3308 .get_sset_count = marvell_get_sset_count,
3309 .get_strings = marvell_get_strings,
3310 .get_stats = marvell_get_stats,
3311 .get_tunable = m88e1540_get_tunable,
3312 .set_tunable = m88e1540_set_tunable,
3315 .phy_id = MARVELL_PHY_ID_88E1548P,
3316 .phy_id_mask = MARVELL_PHY_ID_MASK,
3317 .name = "Marvell 88E1548P",
3318 .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
3319 .probe = marvell_probe,
3320 .features = PHY_GBIT_FIBRE_FEATURES,
3321 .config_init = marvell_1011gbe_config_init,
3322 .config_aneg = m88e1510_config_aneg,
3323 .read_status = marvell_read_status,
3324 .config_intr = marvell_config_intr,
3325 .handle_interrupt = marvell_handle_interrupt,
3326 .resume = genphy_resume,
3327 .suspend = genphy_suspend,
3328 .read_page = marvell_read_page,
3329 .write_page = marvell_write_page,
3330 .get_sset_count = marvell_get_sset_count,
3331 .get_strings = marvell_get_strings,
3332 .get_stats = marvell_get_stats,
3333 .get_tunable = m88e1540_get_tunable,
3334 .set_tunable = m88e1540_set_tunable,
3338 module_phy_driver(marvell_drivers);
3340 static struct mdio_device_id __maybe_unused marvell_tbl[] = {
3341 { MARVELL_PHY_ID_88E1101, MARVELL_PHY_ID_MASK },
3342 { MARVELL_PHY_ID_88E1112, MARVELL_PHY_ID_MASK },
3343 { MARVELL_PHY_ID_88E1111, MARVELL_PHY_ID_MASK },
3344 { MARVELL_PHY_ID_88E1111_FINISAR, MARVELL_PHY_ID_MASK },
3345 { MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK },
3346 { MARVELL_PHY_ID_88E1121R, MARVELL_PHY_ID_MASK },
3347 { MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK },
3348 { MARVELL_PHY_ID_88E1149R, MARVELL_PHY_ID_MASK },
3349 { MARVELL_PHY_ID_88E1240, MARVELL_PHY_ID_MASK },
3350 { MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK },
3351 { MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK },
3352 { MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK },
3353 { MARVELL_PHY_ID_88E1540, MARVELL_PHY_ID_MASK },
3354 { MARVELL_PHY_ID_88E1545, MARVELL_PHY_ID_MASK },
3355 { MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK },
3356 { MARVELL_PHY_ID_88E6341_FAMILY, MARVELL_PHY_ID_MASK },
3357 { MARVELL_PHY_ID_88E6390_FAMILY, MARVELL_PHY_ID_MASK },
3358 { MARVELL_PHY_ID_88E6393_FAMILY, MARVELL_PHY_ID_MASK },
3359 { MARVELL_PHY_ID_88E1340S, MARVELL_PHY_ID_MASK },
3360 { MARVELL_PHY_ID_88E1548P, MARVELL_PHY_ID_MASK },
3364 MODULE_DEVICE_TABLE(mdio, marvell_tbl);