drivers/net/phy/marvell.c

   1 /*
   2  * drivers/net/phy/marvell.c
   3  *
   4  * Driver for Marvell PHYs
   5  *
   6  * Author: Andy Fleming
   7  *
   8  * Copyright (c) 2004 Freescale Semiconductor, Inc.
   9  *
  10  * This program is free software; you can redistribute  it and/or modify it
  11  * under  the terms of  the GNU General  Public License as published by the
  12  * Free Software Foundation;  either version 2 of the  License, or (at your
  13  * option) any later version.
  14  *
  15  */
  16 #include <linux/kernel.h>
  17 #include <linux/string.h>
  18 #include <linux/errno.h>
  19 #include <linux/unistd.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/init.h>
  22 #include <linux/delay.h>
  23 #include <linux/netdevice.h>
  24 #include <linux/etherdevice.h>
  25 #include <linux/skbuff.h>
  26 #include <linux/spinlock.h>
  27 #include <linux/mm.h>
  28 #include <linux/module.h>
  29 #include <linux/mii.h>
  30 #include <linux/ethtool.h>
  31 #include <linux/phy.h>
  32 #include <linux/marvell_phy.h>
  33
  34 #include <asm/io.h>
  35 #include <asm/irq.h>
  36 #include <asm/uaccess.h>
  37
  38 #define MII_M1011_IEVENT                0x13
  39 #define MII_M1011_IEVENT_CLEAR          0x0000
  40
  41 #define MII_M1011_IMASK                 0x12
  42 #define MII_M1011_IMASK_INIT            0x6400
  43 #define MII_M1011_IMASK_CLEAR           0x0000
  44
  45 #define MII_M1011_PHY_SCR               0x10
  46 #define MII_M1011_PHY_SCR_AUTO_CROSS    0x0060
  47
  48 #define MII_M1145_PHY_EXT_CR            0x14
  49 #define MII_M1145_RGMII_RX_DELAY        0x0080
  50 #define MII_M1145_RGMII_TX_DELAY        0x0002
  51
  52 #define MII_M1111_PHY_LED_CONTROL       0x18
  53 #define MII_M1111_PHY_LED_DIRECT        0x4100
  54 #define MII_M1111_PHY_LED_COMBINE       0x411c
  55 #define MII_M1111_PHY_EXT_CR            0x14
  56 #define MII_M1111_RX_DELAY              0x80
  57 #define MII_M1111_TX_DELAY              0x2
  58 #define MII_M1111_PHY_EXT_SR            0x1b
  59
  60 #define MII_M1111_HWCFG_MODE_MASK               0xf
  61 #define MII_M1111_HWCFG_MODE_COPPER_RGMII       0xb
  62 #define MII_M1111_HWCFG_MODE_FIBER_RGMII        0x3
  63 #define MII_M1111_HWCFG_MODE_SGMII_NO_CLK       0x4
  64 #define MII_M1111_HWCFG_MODE_COPPER_RTBI        0x9
  65 #define MII_M1111_HWCFG_FIBER_COPPER_AUTO       0x8000
  66 #define MII_M1111_HWCFG_FIBER_COPPER_RES        0x2000
  67
  68 #define MII_M1111_COPPER                0
  69 #define MII_M1111_FIBER                 1
  70
  71 #define MII_88E1121_PHY_MSCR_PAGE       2
  72 #define MII_88E1121_PHY_MSCR_REG        21
  73 #define MII_88E1121_PHY_MSCR_RX_DELAY   BIT(5)
  74 #define MII_88E1121_PHY_MSCR_TX_DELAY   BIT(4)
  75 #define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4))
  76
  77 #define MII_88EC048_PHY_MSCR1_REG       16
  78 #define MII_88EC048_PHY_MSCR1_PAD_ODD   BIT(6)
  79
  80 #define MII_88E1121_PHY_LED_CTRL        16
  81 #define MII_88E1121_PHY_LED_PAGE        3
  82 #define MII_88E1121_PHY_LED_DEF         0x0030
  83 #define MII_88E1121_PHY_PAGE            22
  84
  85 #define MII_M1011_PHY_STATUS            0x11
  86 #define MII_M1011_PHY_STATUS_1000       0x8000
  87 #define MII_M1011_PHY_STATUS_100        0x4000
  88 #define MII_M1011_PHY_STATUS_SPD_MASK   0xc000
  89 #define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000
  90 #define MII_M1011_PHY_STATUS_RESOLVED   0x0800
  91 #define MII_M1011_PHY_STATUS_LINK       0x0400
  92
  93
  94 MODULE_DESCRIPTION("Marvell PHY driver");
  95 MODULE_AUTHOR("Andy Fleming");
  96 MODULE_LICENSE("GPL");
  97
  98 static int marvell_ack_interrupt(struct phy_device *phydev)
  99 {
 100         int err;
 101
 102         /* Clear the interrupts by reading the reg */
 103         err = phy_read(phydev, MII_M1011_IEVENT);
 104
 105         if (err < 0)
 106                 return err;
 107
 108         return 0;
 109 }
 110
 111 static int marvell_config_intr(struct phy_device *phydev)
 112 {
 113         int err;
 114
 115         if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 116                 err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
 117         else
 118                 err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
 119
 120         return err;
 121 }
 122
 123 static int marvell_config_aneg(struct phy_device *phydev)
 124 {
 125         int err;
 126
 127         /* The Marvell PHY has an errata which requires
 128          * that certain registers get written in order
 129          * to restart autonegotiation */
 130         err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 131
 132         if (err < 0)
 133                 return err;
 134
 135         err = phy_write(phydev, 0x1d, 0x1f);
 136         if (err < 0)
 137                 return err;
 138
 139         err = phy_write(phydev, 0x1e, 0x200c);
 140         if (err < 0)
 141                 return err;
 142
 143         err = phy_write(phydev, 0x1d, 0x5);
 144         if (err < 0)
 145                 return err;
 146
 147         err = phy_write(phydev, 0x1e, 0);
 148         if (err < 0)
 149                 return err;
 150
 151         err = phy_write(phydev, 0x1e, 0x100);
 152         if (err < 0)
 153                 return err;
 154
 155         err = phy_write(phydev, MII_M1011_PHY_SCR,
 156                         MII_M1011_PHY_SCR_AUTO_CROSS);
 157         if (err < 0)
 158                 return err;
 159
 160         err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
 161                         MII_M1111_PHY_LED_DIRECT);
 162         if (err < 0)
 163                 return err;
 164
 165         err = genphy_config_aneg(phydev);
 166         if (err < 0)
 167                 return err;
 168
 169         if (phydev->autoneg != AUTONEG_ENABLE) {
 170                 int bmcr;
 171
 172                 /*
 173                  * A write to speed/duplex bits (that is performed by
 174                  * genphy_config_aneg() call above) must be followed by
 175                  * a software reset. Otherwise, the write has no effect.
 176                  */
 177                 bmcr = phy_read(phydev, MII_BMCR);
 178                 if (bmcr < 0)
 179                         return bmcr;
 180
 181                 err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
 182                 if (err < 0)
 183                         return err;
 184         }
 185
 186         return 0;
 187 }
 188
 189 static int m88e1121_config_aneg(struct phy_device *phydev)
 190 {
 191         int err, oldpage, mscr;
 192
 193         oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
 194
 195         err = phy_write(phydev, MII_88E1121_PHY_PAGE,
 196                         MII_88E1121_PHY_MSCR_PAGE);
 197         if (err < 0)
 198                 return err;
 199         mscr = phy_read(phydev, MII_88E1121_PHY_MSCR_REG) &
 200                 MII_88E1121_PHY_MSCR_DELAY_MASK;
 201
 202         if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
 203                 mscr |= (MII_88E1121_PHY_MSCR_RX_DELAY |
 204                          MII_88E1121_PHY_MSCR_TX_DELAY);
 205         else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
 206                 mscr |= MII_88E1121_PHY_MSCR_RX_DELAY;
 207         else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
 208                 mscr |= MII_88E1121_PHY_MSCR_TX_DELAY;
 209
 210         err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr);
 211         if (err < 0)
 212                 return err;
 213
 214         phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
 215
 216         err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 217         if (err < 0)
 218                 return err;
 219
 220         err = phy_write(phydev, MII_M1011_PHY_SCR,
 221                         MII_M1011_PHY_SCR_AUTO_CROSS);
 222         if (err < 0)
 223                 return err;
 224
 225         oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
 226
 227         phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
 228         phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
 229         phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
 230
 231         err = genphy_config_aneg(phydev);
 232
 233         return err;
 234 }
 235
 236 static int m88ec048_config_aneg(struct phy_device *phydev)
 237 {
 238         int err, oldpage, mscr;
 239
 240         oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
 241
 242         err = phy_write(phydev, MII_88E1121_PHY_PAGE,
 243                         MII_88E1121_PHY_MSCR_PAGE);
 244         if (err < 0)
 245                 return err;
 246
 247         mscr = phy_read(phydev, MII_88EC048_PHY_MSCR1_REG);
 248         mscr |= MII_88EC048_PHY_MSCR1_PAD_ODD;
 249
 250         err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr);
 251         if (err < 0)
 252                 return err;
 253
 254         err = phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
 255         if (err < 0)
 256                 return err;
 257
 258         return m88e1121_config_aneg(phydev);
 259 }
 260
 261 static int m88e1111_config_init(struct phy_device *phydev)
 262 {
 263         int err;
 264         int temp;
 265
 266         /* Enable Fiber/Copper auto selection */
 267         temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
 268         temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO;
 269         phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 270
 271         temp = phy_read(phydev, MII_BMCR);
 272         temp |= BMCR_RESET;
 273         phy_write(phydev, MII_BMCR, temp);
 274
 275         if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
 276             (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
 277             (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
 278             (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
 279
 280                 temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
 281                 if (temp < 0)
 282                         return temp;
 283
 284                 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
 285                         temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
 286                 } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
 287                         temp &= ~MII_M1111_TX_DELAY;
 288                         temp |= MII_M1111_RX_DELAY;
 289                 } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
 290                         temp &= ~MII_M1111_RX_DELAY;
 291                         temp |= MII_M1111_TX_DELAY;
 292                 }
 293
 294                 err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
 295                 if (err < 0)
 296                         return err;
 297
 298                 temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
 299                 if (temp < 0)
 300                         return temp;
 301
 302                 temp &= ~(MII_M1111_HWCFG_MODE_MASK);
 303
 304                 if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
 305                         temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
 306                 else
 307                         temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
 308
 309                 err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 310                 if (err < 0)
 311                         return err;
 312         }
 313
 314         if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
 315                 temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
 316                 if (temp < 0)
 317                         return temp;
 318
 319                 temp &= ~(MII_M1111_HWCFG_MODE_MASK);
 320                 temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
 321                 temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
 322
 323                 err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 324                 if (err < 0)
 325                         return err;
 326         }
 327
 328         if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
 329                 temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
 330                 if (temp < 0)
 331                         return temp;
 332                 temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
 333                 err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
 334                 if (err < 0)
 335                         return err;
 336
 337                 temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
 338                 if (temp < 0)
 339                         return temp;
 340                 temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
 341                 temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
 342                 err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 343                 if (err < 0)
 344                         return err;
 345
 346                 /* soft reset */
 347                 err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 348                 if (err < 0)
 349                         return err;
 350                 do
 351                         temp = phy_read(phydev, MII_BMCR);
 352                 while (temp & BMCR_RESET);
 353
 354                 temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
 355                 if (temp < 0)
 356                         return temp;
 357                 temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
 358                 temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
 359                 err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 360                 if (err < 0)
 361                         return err;
 362         }
 363
 364
 365         err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 366         if (err < 0)
 367                 return err;
 368
 369         return 0;
 370 }
 371
 372 static int m88e1118_config_aneg(struct phy_device *phydev)
 373 {
 374         int err;
 375
 376         err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 377         if (err < 0)
 378                 return err;
 379
 380         err = phy_write(phydev, MII_M1011_PHY_SCR,
 381                         MII_M1011_PHY_SCR_AUTO_CROSS);
 382         if (err < 0)
 383                 return err;
 384
 385         err = genphy_config_aneg(phydev);
 386         return 0;
 387 }
 388
 389 static int m88e1118_config_init(struct phy_device *phydev)
 390 {
 391         int err;
 392
 393         /* Change address */
 394         err = phy_write(phydev, 0x16, 0x0002);
 395         if (err < 0)
 396                 return err;
 397
 398         /* Enable 1000 Mbit */
 399         err = phy_write(phydev, 0x15, 0x1070);
 400         if (err < 0)
 401                 return err;
 402
 403         /* Change address */
 404         err = phy_write(phydev, 0x16, 0x0003);
 405         if (err < 0)
 406                 return err;
 407
 408         /* Adjust LED Control */
 409         if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
 410                 err = phy_write(phydev, 0x10, 0x1100);
 411         else
 412                 err = phy_write(phydev, 0x10, 0x021e);
 413         if (err < 0)
 414                 return err;
 415
 416         /* Reset address */
 417         err = phy_write(phydev, 0x16, 0x0);
 418         if (err < 0)
 419                 return err;
 420
 421         err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 422         if (err < 0)
 423                 return err;
 424
 425         return 0;
 426 }
 427
 428 static int m88e1145_config_init(struct phy_device *phydev)
 429 {
 430         int err;
 431
 432         /* Take care of errata E0 & E1 */
 433         err = phy_write(phydev, 0x1d, 0x001b);
 434         if (err < 0)
 435                 return err;
 436
 437         err = phy_write(phydev, 0x1e, 0x418f);
 438         if (err < 0)
 439                 return err;
 440
 441         err = phy_write(phydev, 0x1d, 0x0016);
 442         if (err < 0)
 443                 return err;
 444
 445         err = phy_write(phydev, 0x1e, 0xa2da);
 446         if (err < 0)
 447                 return err;
 448
 449         if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
 450                 int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
 451                 if (temp < 0)
 452                         return temp;
 453
 454                 temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY);
 455
 456                 err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
 457                 if (err < 0)
 458                         return err;
 459
 460                 if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
 461                         err = phy_write(phydev, 0x1d, 0x0012);
 462                         if (err < 0)
 463                                 return err;
 464
 465                         temp = phy_read(phydev, 0x1e);
 466                         if (temp < 0)
 467                                 return temp;
 468
 469                         temp &= 0xf03f;
 470                         temp |= 2 << 9; /* 36 ohm */
 471                         temp |= 2 << 6; /* 39 ohm */
 472
 473                         err = phy_write(phydev, 0x1e, temp);
 474                         if (err < 0)
 475                                 return err;
 476
 477                         err = phy_write(phydev, 0x1d, 0x3);
 478                         if (err < 0)
 479                                 return err;
 480
 481                         err = phy_write(phydev, 0x1e, 0x8000);
 482                         if (err < 0)
 483                                 return err;
 484                 }
 485         }
 486
 487         return 0;
 488 }
 489
 490 /* marvell_read_status
 491  *
 492  * Generic status code does not detect Fiber correctly!
 493  * Description:
 494  *   Check the link, then figure out the current state
 495  *   by comparing what we advertise with what the link partner
 496  *   advertises.  Start by checking the gigabit possibilities,
 497  *   then move on to 10/100.
 498  */
 499 static int marvell_read_status(struct phy_device *phydev)
 500 {
 501         int adv;
 502         int err;
 503         int lpa;
 504         int status = 0;
 505
 506         /* Update the link, but return if there
 507          * was an error */
 508         err = genphy_update_link(phydev);
 509         if (err)
 510                 return err;
 511
 512         if (AUTONEG_ENABLE == phydev->autoneg) {
 513                 status = phy_read(phydev, MII_M1011_PHY_STATUS);
 514                 if (status < 0)
 515                         return status;
 516
 517                 lpa = phy_read(phydev, MII_LPA);
 518                 if (lpa < 0)
 519                         return lpa;
 520
 521                 adv = phy_read(phydev, MII_ADVERTISE);
 522                 if (adv < 0)
 523                         return adv;
 524
 525                 lpa &= adv;
 526
 527                 if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
 528                         phydev->duplex = DUPLEX_FULL;
 529                 else
 530                         phydev->duplex = DUPLEX_HALF;
 531
 532                 status = status & MII_M1011_PHY_STATUS_SPD_MASK;
 533                 phydev->pause = phydev->asym_pause = 0;
 534
 535                 switch (status) {
 536                 case MII_M1011_PHY_STATUS_1000:
 537                         phydev->speed = SPEED_1000;
 538                         break;
 539
 540                 case MII_M1011_PHY_STATUS_100:
 541                         phydev->speed = SPEED_100;
 542                         break;
 543
 544                 default:
 545                         phydev->speed = SPEED_10;
 546                         break;
 547                 }
 548
 549                 if (phydev->duplex == DUPLEX_FULL) {
 550                         phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
 551                         phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
 552                 }
 553         } else {
 554                 int bmcr = phy_read(phydev, MII_BMCR);
 555
 556                 if (bmcr < 0)
 557                         return bmcr;
 558
 559                 if (bmcr & BMCR_FULLDPLX)
 560                         phydev->duplex = DUPLEX_FULL;
 561                 else
 562                         phydev->duplex = DUPLEX_HALF;
 563
 564                 if (bmcr & BMCR_SPEED1000)
 565                         phydev->speed = SPEED_1000;
 566                 else if (bmcr & BMCR_SPEED100)
 567                         phydev->speed = SPEED_100;
 568                 else
 569                         phydev->speed = SPEED_10;
 570
 571                 phydev->pause = phydev->asym_pause = 0;
 572         }
 573
 574         return 0;
 575 }
 576
 577 static int m88e1121_did_interrupt(struct phy_device *phydev)
 578 {
 579         int imask;
 580
 581         imask = phy_read(phydev, MII_M1011_IEVENT);
 582
 583         if (imask & MII_M1011_IMASK_INIT)
 584                 return 1;
 585
 586         return 0;
 587 }
 588
 589 static struct phy_driver marvell_drivers[] = {
 590         {
 591                 .phy_id = MARVELL_PHY_ID_88E1101,
 592                 .phy_id_mask = MARVELL_PHY_ID_MASK,
 593                 .name = "Marvell 88E1101",
 594                 .features = PHY_GBIT_FEATURES,
 595                 .flags = PHY_HAS_INTERRUPT,
 596                 .config_aneg = &marvell_config_aneg,
 597                 .read_status = &genphy_read_status,
 598                 .ack_interrupt = &marvell_ack_interrupt,
 599                 .config_intr = &marvell_config_intr,
 600                 .driver = { .owner = THIS_MODULE },
 601         },
 602         {
 603                 .phy_id = MARVELL_PHY_ID_88E1112,
 604                 .phy_id_mask = MARVELL_PHY_ID_MASK,
 605                 .name = "Marvell 88E1112",
 606                 .features = PHY_GBIT_FEATURES,
 607                 .flags = PHY_HAS_INTERRUPT,
 608                 .config_init = &m88e1111_config_init,
 609                 .config_aneg = &marvell_config_aneg,
 610                 .read_status = &genphy_read_status,
 611                 .ack_interrupt = &marvell_ack_interrupt,
 612                 .config_intr = &marvell_config_intr,
 613                 .driver = { .owner = THIS_MODULE },
 614         },
 615         {
 616                 .phy_id = MARVELL_PHY_ID_88E1111,
 617                 .phy_id_mask = MARVELL_PHY_ID_MASK,
 618                 .name = "Marvell 88E1111",
 619                 .features = PHY_GBIT_FEATURES,
 620                 .flags = PHY_HAS_INTERRUPT,
 621                 .config_init = &m88e1111_config_init,
 622                 .config_aneg = &marvell_config_aneg,
 623                 .read_status = &marvell_read_status,
 624                 .ack_interrupt = &marvell_ack_interrupt,
 625                 .config_intr = &marvell_config_intr,
 626                 .driver = { .owner = THIS_MODULE },
 627         },
 628         {
 629                 .phy_id = MARVELL_PHY_ID_88E1118,
 630                 .phy_id_mask = MARVELL_PHY_ID_MASK,
 631                 .name = "Marvell 88E1118",
 632                 .features = PHY_GBIT_FEATURES,
 633                 .flags = PHY_HAS_INTERRUPT,
 634                 .config_init = &m88e1118_config_init,
 635                 .config_aneg = &m88e1118_config_aneg,
 636                 .read_status = &genphy_read_status,
 637                 .ack_interrupt = &marvell_ack_interrupt,
 638                 .config_intr = &marvell_config_intr,
 639                 .driver = {.owner = THIS_MODULE,},
 640         },
 641         {
 642                 .phy_id = MARVELL_PHY_ID_88E1121R,
 643                 .phy_id_mask = MARVELL_PHY_ID_MASK,
 644                 .name = "Marvell 88E1121R",
 645                 .features = PHY_GBIT_FEATURES,
 646                 .flags = PHY_HAS_INTERRUPT,
 647                 .config_aneg = &m88e1121_config_aneg,
 648                 .read_status = &marvell_read_status,
 649                 .ack_interrupt = &marvell_ack_interrupt,
 650                 .config_intr = &marvell_config_intr,
 651                 .did_interrupt = &m88e1121_did_interrupt,
 652                 .driver = { .owner = THIS_MODULE },
 653         },
 654         {
 655                 .phy_id = MARVELL_PHY_ID_88EC048,
 656                 .phy_id_mask = MARVELL_PHY_ID_MASK,
 657                 .name = "Marvell 88EC048",
 658                 .features = PHY_GBIT_FEATURES,
 659                 .flags = PHY_HAS_INTERRUPT,
 660                 .config_aneg = &m88ec048_config_aneg,
 661                 .read_status = &marvell_read_status,
 662                 .ack_interrupt = &marvell_ack_interrupt,
 663                 .config_intr = &marvell_config_intr,
 664                 .did_interrupt = &m88e1121_did_interrupt,
 665                 .driver = { .owner = THIS_MODULE },
 666         },
 667         {
 668                 .phy_id = MARVELL_PHY_ID_88E1145,
 669                 .phy_id_mask = MARVELL_PHY_ID_MASK,
 670                 .name = "Marvell 88E1145",
 671                 .features = PHY_GBIT_FEATURES,
 672                 .flags = PHY_HAS_INTERRUPT,
 673                 .config_init = &m88e1145_config_init,
 674                 .config_aneg = &marvell_config_aneg,
 675                 .read_status = &genphy_read_status,
 676                 .ack_interrupt = &marvell_ack_interrupt,
 677                 .config_intr = &marvell_config_intr,
 678                 .driver = { .owner = THIS_MODULE },
 679         },
 680         {
 681                 .phy_id = MARVELL_PHY_ID_88E1240,
 682                 .phy_id_mask = MARVELL_PHY_ID_MASK,
 683                 .name = "Marvell 88E1240",
 684                 .features = PHY_GBIT_FEATURES,
 685                 .flags = PHY_HAS_INTERRUPT,
 686                 .config_init = &m88e1111_config_init,
 687                 .config_aneg = &marvell_config_aneg,
 688                 .read_status = &genphy_read_status,
 689                 .ack_interrupt = &marvell_ack_interrupt,
 690                 .config_intr = &marvell_config_intr,
 691                 .driver = { .owner = THIS_MODULE },
 692         },
 693 };
 694
 695 static int __init marvell_init(void)
 696 {
 697         int ret;
 698         int i;
 699
 700         for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++) {
 701                 ret = phy_driver_register(&marvell_drivers[i]);
 702
 703                 if (ret) {
 704                         while (i-- > 0)
 705                                 phy_driver_unregister(&marvell_drivers[i]);
 706                         return ret;
 707                 }
 708         }
 709
 710         return 0;
 711 }
 712
 713 static void __exit marvell_exit(void)
 714 {
 715         int i;
 716
 717         for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++)
 718                 phy_driver_unregister(&marvell_drivers[i]);
 719 }
 720
 721 module_init(marvell_init);
 722 module_exit(marvell_exit);
 723
 724 static struct mdio_device_id marvell_tbl[] = {
 725         { 0x01410c60, 0xfffffff0 },
 726         { 0x01410c90, 0xfffffff0 },
 727         { 0x01410cc0, 0xfffffff0 },
 728         { 0x01410e10, 0xfffffff0 },
 729         { 0x01410cb0, 0xfffffff0 },
 730         { 0x01410cd0, 0xfffffff0 },
 731         { 0x01410e30, 0xfffffff0 },
 732         { 0x01410e90, 0xfffffff0 },
 733         { }
 734 };
 735
 736 MODULE_DEVICE_TABLE(mdio, marvell_tbl);