ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode
[platform/kernel/linux-starfive.git] / drivers / net / ipa / ipa_table.c
1 // SPDX-License-Identifier: GPL-2.0
2
3 /* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
4  * Copyright (C) 2018-2021 Linaro Ltd.
5  */
6
7 #include <linux/types.h>
8 #include <linux/kernel.h>
9 #include <linux/bits.h>
10 #include <linux/bitops.h>
11 #include <linux/bitfield.h>
12 #include <linux/io.h>
13 #include <linux/build_bug.h>
14 #include <linux/device.h>
15 #include <linux/dma-mapping.h>
16
17 #include "ipa.h"
18 #include "ipa_version.h"
19 #include "ipa_endpoint.h"
20 #include "ipa_table.h"
21 #include "ipa_reg.h"
22 #include "ipa_mem.h"
23 #include "ipa_cmd.h"
24 #include "gsi.h"
25 #include "gsi_trans.h"
26
27 /**
28  * DOC: IPA Filter and Route Tables
29  *
30  * The IPA has tables defined in its local (IPA-resident) memory that define
31  * filter and routing rules.  An entry in either of these tables is a little
32  * endian 64-bit "slot" that holds the address of a rule definition.  (The
33  * size of these slots is 64 bits regardless of the host DMA address size.)
34  *
35  * Separate tables (both filter and route) used for IPv4 and IPv6.  There
36  * are normally another set of "hashed" filter and route tables, which are
37  * used with a hash of message metadata.  Hashed operation is not supported
38  * by all IPA hardware (IPA v4.2 doesn't support hashed tables).
39  *
40  * Rules can be in local memory or in DRAM (system memory).  The offset of
41  * an object (such as a route or filter table) in IPA-resident memory must
42  * 128-byte aligned.  An object in system memory (such as a route or filter
43  * rule) must be at an 8-byte aligned address.  We currently only place
44  * route or filter rules in system memory.
45  *
46  * A rule consists of a contiguous block of 32-bit values terminated with
47  * 32 zero bits.  A special "zero entry" rule consisting of 64 zero bits
48  * represents "no filtering" or "no routing," and is the reset value for
49  * filter or route table rules.
50  *
51  * Each filter rule is associated with an AP or modem TX endpoint, though
52  * not all TX endpoints support filtering.  The first 64-bit slot in a
53  * filter table is a bitmap indicating which endpoints have entries in
54  * the table.  The low-order bit (bit 0) in this bitmap represents a
55  * special global filter, which applies to all traffic.  This is not
56  * used in the current code.  Bit 1, if set, indicates that there is an
57  * entry (i.e. slot containing a system address referring to a rule) for
58  * endpoint 0 in the table.  Bit 3, if set, indicates there is an entry
59  * for endpoint 2, and so on.  Space is set aside in IPA local memory to
60  * hold as many filter table entries as might be required, but typically
61  * they are not all used.
62  *
63  * The AP initializes all entries in a filter table to refer to a "zero"
64  * entry.  Once initialized the modem and AP update the entries for
65  * endpoints they "own" directly.  Currently the AP does not use the
66  * IPA filtering functionality.
67  *
68  *                    IPA Filter Table
69  *                 ----------------------
70  * endpoint bitmap | 0x0000000000000048 | Bits 3 and 6 set (endpoints 2 and 5)
71  *                 |--------------------|
72  * 1st endpoint    | 0x000123456789abc0 | DMA address for modem endpoint 2 rule
73  *                 |--------------------|
74  * 2nd endpoint    | 0x000123456789abf0 | DMA address for AP endpoint 5 rule
75  *                 |--------------------|
76  * (unused)        |                    | (Unused space in filter table)
77  *                 |--------------------|
78  *                          . . .
79  *                 |--------------------|
80  * (unused)        |                    | (Unused space in filter table)
81  *                 ----------------------
82  *
83  * The set of available route rules is divided about equally between the AP
84  * and modem.  The AP initializes all entries in a route table to refer to
85  * a "zero entry".  Once initialized, the modem and AP are responsible for
86  * updating their own entries.  All entries in a route table are usable,
87  * though the AP currently does not use the IPA routing functionality.
88  *
89  *                    IPA Route Table
90  *                 ----------------------
91  * 1st modem route | 0x0001234500001100 | DMA address for first route rule
92  *                 |--------------------|
93  * 2nd modem route | 0x0001234500001140 | DMA address for second route rule
94  *                 |--------------------|
95  *                          . . .
96  *                 |--------------------|
97  * Last modem route| 0x0001234500002280 | DMA address for Nth route rule
98  *                 |--------------------|
99  * 1st AP route    | 0x0001234500001100 | DMA address for route rule (N+1)
100  *                 |--------------------|
101  * 2nd AP route    | 0x0001234500001140 | DMA address for next route rule
102  *                 |--------------------|
103  *                          . . .
104  *                 |--------------------|
105  * Last AP route   | 0x0001234500002280 | DMA address for last route rule
106  *                 ----------------------
107  */
108
109 /* Assignment of route table entries to the modem and AP */
110 #define IPA_ROUTE_MODEM_MIN             0
111 #define IPA_ROUTE_MODEM_COUNT           8
112
113 #define IPA_ROUTE_AP_MIN                IPA_ROUTE_MODEM_COUNT
114 #define IPA_ROUTE_AP_COUNT \
115                 (IPA_ROUTE_COUNT_MAX - IPA_ROUTE_MODEM_COUNT)
116
117 /* Filter or route rules consist of a set of 32-bit values followed by a
118  * 32-bit all-zero rule list terminator.  The "zero rule" is simply an
119  * all-zero rule followed by the list terminator.
120  */
121 #define IPA_ZERO_RULE_SIZE              (2 * sizeof(__le32))
122
123 /* Check things that can be validated at build time. */
124 static void ipa_table_validate_build(void)
125 {
126         /* Filter and route tables contain DMA addresses that refer
127          * to filter or route rules.  But the size of a table entry
128          * is 64 bits regardless of what the size of an AP DMA address
129          * is.  A fixed constant defines the size of an entry, and
130          * code in ipa_table_init() uses a pointer to __le64 to
131          * initialize tables.
132          */
133         BUILD_BUG_ON(sizeof(dma_addr_t) > sizeof(__le64));
134
135         /* A "zero rule" is used to represent no filtering or no routing.
136          * It is a 64-bit block of zeroed memory.  Code in ipa_table_init()
137          * assumes that it can be written using a pointer to __le64.
138          */
139         BUILD_BUG_ON(IPA_ZERO_RULE_SIZE != sizeof(__le64));
140
141         /* Impose a practical limit on the number of routes */
142         BUILD_BUG_ON(IPA_ROUTE_COUNT_MAX > 32);
143         /* The modem must be allotted at least one route table entry */
144         BUILD_BUG_ON(!IPA_ROUTE_MODEM_COUNT);
145         /* But it can't have more than what is available */
146         BUILD_BUG_ON(IPA_ROUTE_MODEM_COUNT > IPA_ROUTE_COUNT_MAX);
147
148 }
149
150 static bool
151 ipa_table_valid_one(struct ipa *ipa, enum ipa_mem_id mem_id, bool route)
152 {
153         const struct ipa_mem *mem = ipa_mem_find(ipa, mem_id);
154         struct device *dev = &ipa->pdev->dev;
155         u32 size;
156
157         if (route)
158                 size = IPA_ROUTE_COUNT_MAX * sizeof(__le64);
159         else
160                 size = (1 + IPA_FILTER_COUNT_MAX) * sizeof(__le64);
161
162         if (!ipa_cmd_table_valid(ipa, mem, route))
163                 return false;
164
165         /* mem->size >= size is sufficient, but we'll demand more */
166         if (mem->size == size)
167                 return true;
168
169         /* Hashed table regions can be zero size if hashing is not supported */
170         if (ipa_table_hash_support(ipa) && !mem->size)
171                 return true;
172
173         dev_err(dev, "%s table region %u size 0x%02x, expected 0x%02x\n",
174                 route ? "route" : "filter", mem_id, mem->size, size);
175
176         return false;
177 }
178
179 /* Verify the filter and route table memory regions are the expected size */
180 bool ipa_table_valid(struct ipa *ipa)
181 {
182         bool valid;
183
184         valid = ipa_table_valid_one(ipa, IPA_MEM_V4_FILTER, false);
185         valid = valid && ipa_table_valid_one(ipa, IPA_MEM_V6_FILTER, false);
186         valid = valid && ipa_table_valid_one(ipa, IPA_MEM_V4_ROUTE, true);
187         valid = valid && ipa_table_valid_one(ipa, IPA_MEM_V6_ROUTE, true);
188
189         if (!ipa_table_hash_support(ipa))
190                 return valid;
191
192         valid = valid && ipa_table_valid_one(ipa, IPA_MEM_V4_FILTER_HASHED,
193                                              false);
194         valid = valid && ipa_table_valid_one(ipa, IPA_MEM_V6_FILTER_HASHED,
195                                              false);
196         valid = valid && ipa_table_valid_one(ipa, IPA_MEM_V4_ROUTE_HASHED,
197                                              true);
198         valid = valid && ipa_table_valid_one(ipa, IPA_MEM_V6_ROUTE_HASHED,
199                                              true);
200
201         return valid;
202 }
203
204 bool ipa_filter_map_valid(struct ipa *ipa, u32 filter_map)
205 {
206         struct device *dev = &ipa->pdev->dev;
207         u32 count;
208
209         if (!filter_map) {
210                 dev_err(dev, "at least one filtering endpoint is required\n");
211
212                 return false;
213         }
214
215         count = hweight32(filter_map);
216         if (count > IPA_FILTER_COUNT_MAX) {
217                 dev_err(dev, "too many filtering endpoints (%u, max %u)\n",
218                         count, IPA_FILTER_COUNT_MAX);
219
220                 return false;
221         }
222
223         return true;
224 }
225
226 /* Zero entry count means no table, so just return a 0 address */
227 static dma_addr_t ipa_table_addr(struct ipa *ipa, bool filter_mask, u16 count)
228 {
229         u32 skip;
230
231         if (!count)
232                 return 0;
233
234         WARN_ON(count > max_t(u32, IPA_FILTER_COUNT_MAX, IPA_ROUTE_COUNT_MAX));
235
236         /* Skip over the zero rule and possibly the filter mask */
237         skip = filter_mask ? 1 : 2;
238
239         return ipa->table_addr + skip * sizeof(*ipa->table_virt);
240 }
241
242 static void ipa_table_reset_add(struct gsi_trans *trans, bool filter,
243                                 u16 first, u16 count, enum ipa_mem_id mem_id)
244 {
245         struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
246         const struct ipa_mem *mem = ipa_mem_find(ipa, mem_id);
247         dma_addr_t addr;
248         u32 offset;
249         u16 size;
250
251         /* Nothing to do if the table memory region is empty */
252         if (!mem->size)
253                 return;
254
255         if (filter)
256                 first++;        /* skip over bitmap */
257
258         offset = mem->offset + first * sizeof(__le64);
259         size = count * sizeof(__le64);
260         addr = ipa_table_addr(ipa, false, count);
261
262         ipa_cmd_dma_shared_mem_add(trans, offset, size, addr, true);
263 }
264
265 /* Reset entries in a single filter table belonging to either the AP or
266  * modem to refer to the zero entry.  The memory region supplied will be
267  * for the IPv4 and IPv6 non-hashed and hashed filter tables.
268  */
269 static int
270 ipa_filter_reset_table(struct ipa *ipa, enum ipa_mem_id mem_id, bool modem)
271 {
272         u32 ep_mask = ipa->filter_map;
273         u32 count = hweight32(ep_mask);
274         struct gsi_trans *trans;
275         enum gsi_ee_id ee_id;
276
277         trans = ipa_cmd_trans_alloc(ipa, count);
278         if (!trans) {
279                 dev_err(&ipa->pdev->dev,
280                         "no transaction for %s filter reset\n",
281                         modem ? "modem" : "AP");
282                 return -EBUSY;
283         }
284
285         ee_id = modem ? GSI_EE_MODEM : GSI_EE_AP;
286         while (ep_mask) {
287                 u32 endpoint_id = __ffs(ep_mask);
288                 struct ipa_endpoint *endpoint;
289
290                 ep_mask ^= BIT(endpoint_id);
291
292                 endpoint = &ipa->endpoint[endpoint_id];
293                 if (endpoint->ee_id != ee_id)
294                         continue;
295
296                 ipa_table_reset_add(trans, true, endpoint_id, 1, mem_id);
297         }
298
299         gsi_trans_commit_wait(trans);
300
301         return 0;
302 }
303
304 /* Theoretically, each filter table could have more filter slots to
305  * update than the maximum number of commands in a transaction.  So
306  * we do each table separately.
307  */
308 static int ipa_filter_reset(struct ipa *ipa, bool modem)
309 {
310         int ret;
311
312         ret = ipa_filter_reset_table(ipa, IPA_MEM_V4_FILTER, modem);
313         if (ret)
314                 return ret;
315
316         ret = ipa_filter_reset_table(ipa, IPA_MEM_V4_FILTER_HASHED, modem);
317         if (ret)
318                 return ret;
319
320         ret = ipa_filter_reset_table(ipa, IPA_MEM_V6_FILTER, modem);
321         if (ret)
322                 return ret;
323         ret = ipa_filter_reset_table(ipa, IPA_MEM_V6_FILTER_HASHED, modem);
324
325         return ret;
326 }
327
328 /* The AP routes and modem routes are each contiguous within the
329  * table.  We can update each table with a single command, and we
330  * won't exceed the per-transaction command limit.
331  * */
332 static int ipa_route_reset(struct ipa *ipa, bool modem)
333 {
334         struct gsi_trans *trans;
335         u16 first;
336         u16 count;
337
338         trans = ipa_cmd_trans_alloc(ipa, 4);
339         if (!trans) {
340                 dev_err(&ipa->pdev->dev,
341                         "no transaction for %s route reset\n",
342                         modem ? "modem" : "AP");
343                 return -EBUSY;
344         }
345
346         if (modem) {
347                 first = IPA_ROUTE_MODEM_MIN;
348                 count = IPA_ROUTE_MODEM_COUNT;
349         } else {
350                 first = IPA_ROUTE_AP_MIN;
351                 count = IPA_ROUTE_AP_COUNT;
352         }
353
354         ipa_table_reset_add(trans, false, first, count, IPA_MEM_V4_ROUTE);
355         ipa_table_reset_add(trans, false, first, count,
356                             IPA_MEM_V4_ROUTE_HASHED);
357
358         ipa_table_reset_add(trans, false, first, count, IPA_MEM_V6_ROUTE);
359         ipa_table_reset_add(trans, false, first, count,
360                             IPA_MEM_V6_ROUTE_HASHED);
361
362         gsi_trans_commit_wait(trans);
363
364         return 0;
365 }
366
367 void ipa_table_reset(struct ipa *ipa, bool modem)
368 {
369         struct device *dev = &ipa->pdev->dev;
370         const char *ee_name;
371         int ret;
372
373         ee_name = modem ? "modem" : "AP";
374
375         /* Report errors, but reset filter and route tables */
376         ret = ipa_filter_reset(ipa, modem);
377         if (ret)
378                 dev_err(dev, "error %d resetting filter table for %s\n",
379                                 ret, ee_name);
380
381         ret = ipa_route_reset(ipa, modem);
382         if (ret)
383                 dev_err(dev, "error %d resetting route table for %s\n",
384                                 ret, ee_name);
385 }
386
387 int ipa_table_hash_flush(struct ipa *ipa)
388 {
389         u32 offset = ipa_reg_filt_rout_hash_flush_offset(ipa->version);
390         struct gsi_trans *trans;
391         u32 val;
392
393         if (!ipa_table_hash_support(ipa))
394                 return 0;
395
396         trans = ipa_cmd_trans_alloc(ipa, 1);
397         if (!trans) {
398                 dev_err(&ipa->pdev->dev, "no transaction for hash flush\n");
399                 return -EBUSY;
400         }
401
402         val = IPV4_FILTER_HASH_FMASK | IPV6_FILTER_HASH_FMASK;
403         val |= IPV6_ROUTER_HASH_FMASK | IPV4_ROUTER_HASH_FMASK;
404
405         ipa_cmd_register_write_add(trans, offset, val, val, false);
406
407         gsi_trans_commit_wait(trans);
408
409         return 0;
410 }
411
412 static void ipa_table_init_add(struct gsi_trans *trans, bool filter,
413                                enum ipa_cmd_opcode opcode,
414                                enum ipa_mem_id mem_id,
415                                enum ipa_mem_id hash_mem_id)
416 {
417         struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
418         const struct ipa_mem *hash_mem = ipa_mem_find(ipa, hash_mem_id);
419         const struct ipa_mem *mem = ipa_mem_find(ipa, mem_id);
420         dma_addr_t hash_addr;
421         dma_addr_t addr;
422         u16 hash_count;
423         u16 hash_size;
424         u16 count;
425         u16 size;
426
427         /* The number of filtering endpoints determines number of entries
428          * in the filter table.  The hashed and non-hashed filter table
429          * will have the same number of entries.  The size of the route
430          * table region determines the number of entries it has.
431          */
432         if (filter) {
433                 count = hweight32(ipa->filter_map);
434                 hash_count = hash_mem->size ? count : 0;
435         } else {
436                 count = mem->size / sizeof(__le64);
437                 hash_count = hash_mem->size / sizeof(__le64);
438         }
439         size = count * sizeof(__le64);
440         hash_size = hash_count * sizeof(__le64);
441
442         addr = ipa_table_addr(ipa, filter, count);
443         hash_addr = ipa_table_addr(ipa, filter, hash_count);
444
445         ipa_cmd_table_init_add(trans, opcode, size, mem->offset, addr,
446                                hash_size, hash_mem->offset, hash_addr);
447 }
448
449 int ipa_table_setup(struct ipa *ipa)
450 {
451         struct gsi_trans *trans;
452
453         trans = ipa_cmd_trans_alloc(ipa, 4);
454         if (!trans) {
455                 dev_err(&ipa->pdev->dev, "no transaction for table setup\n");
456                 return -EBUSY;
457         }
458
459         ipa_table_init_add(trans, false, IPA_CMD_IP_V4_ROUTING_INIT,
460                            IPA_MEM_V4_ROUTE, IPA_MEM_V4_ROUTE_HASHED);
461
462         ipa_table_init_add(trans, false, IPA_CMD_IP_V6_ROUTING_INIT,
463                            IPA_MEM_V6_ROUTE, IPA_MEM_V6_ROUTE_HASHED);
464
465         ipa_table_init_add(trans, true, IPA_CMD_IP_V4_FILTER_INIT,
466                            IPA_MEM_V4_FILTER, IPA_MEM_V4_FILTER_HASHED);
467
468         ipa_table_init_add(trans, true, IPA_CMD_IP_V6_FILTER_INIT,
469                            IPA_MEM_V6_FILTER, IPA_MEM_V6_FILTER_HASHED);
470
471         gsi_trans_commit_wait(trans);
472
473         return 0;
474 }
475
476 /**
477  * ipa_filter_tuple_zero() - Zero an endpoint's hashed filter tuple
478  * @endpoint:   Endpoint whose filter hash tuple should be zeroed
479  *
480  * Endpoint must be for the AP (not modem) and support filtering. Updates
481  * the filter hash values without changing route ones.
482  */
483 static void ipa_filter_tuple_zero(struct ipa_endpoint *endpoint)
484 {
485         u32 endpoint_id = endpoint->endpoint_id;
486         u32 offset;
487         u32 val;
488
489         offset = IPA_REG_ENDP_FILTER_ROUTER_HSH_CFG_N_OFFSET(endpoint_id);
490
491         val = ioread32(endpoint->ipa->reg_virt + offset);
492
493         /* Zero all filter-related fields, preserving the rest */
494         u32p_replace_bits(&val, 0, IPA_REG_ENDP_FILTER_HASH_MSK_ALL);
495
496         iowrite32(val, endpoint->ipa->reg_virt + offset);
497 }
498
499 /* Configure a hashed filter table; there is no ipa_filter_deconfig() */
500 static void ipa_filter_config(struct ipa *ipa, bool modem)
501 {
502         enum gsi_ee_id ee_id = modem ? GSI_EE_MODEM : GSI_EE_AP;
503         u32 ep_mask = ipa->filter_map;
504
505         if (!ipa_table_hash_support(ipa))
506                 return;
507
508         while (ep_mask) {
509                 u32 endpoint_id = __ffs(ep_mask);
510                 struct ipa_endpoint *endpoint;
511
512                 ep_mask ^= BIT(endpoint_id);
513
514                 endpoint = &ipa->endpoint[endpoint_id];
515                 if (endpoint->ee_id == ee_id)
516                         ipa_filter_tuple_zero(endpoint);
517         }
518 }
519
520 static bool ipa_route_id_modem(u32 route_id)
521 {
522         return route_id >= IPA_ROUTE_MODEM_MIN &&
523                 route_id <= IPA_ROUTE_MODEM_MIN + IPA_ROUTE_MODEM_COUNT - 1;
524 }
525
526 /**
527  * ipa_route_tuple_zero() - Zero a hashed route table entry tuple
528  * @ipa:        IPA pointer
529  * @route_id:   Route table entry whose hash tuple should be zeroed
530  *
531  * Updates the route hash values without changing filter ones.
532  */
533 static void ipa_route_tuple_zero(struct ipa *ipa, u32 route_id)
534 {
535         u32 offset = IPA_REG_ENDP_FILTER_ROUTER_HSH_CFG_N_OFFSET(route_id);
536         u32 val;
537
538         val = ioread32(ipa->reg_virt + offset);
539
540         /* Zero all route-related fields, preserving the rest */
541         u32p_replace_bits(&val, 0, IPA_REG_ENDP_ROUTER_HASH_MSK_ALL);
542
543         iowrite32(val, ipa->reg_virt + offset);
544 }
545
546 /* Configure a hashed route table; there is no ipa_route_deconfig() */
547 static void ipa_route_config(struct ipa *ipa, bool modem)
548 {
549         u32 route_id;
550
551         if (!ipa_table_hash_support(ipa))
552                 return;
553
554         for (route_id = 0; route_id < IPA_ROUTE_COUNT_MAX; route_id++)
555                 if (ipa_route_id_modem(route_id) == modem)
556                         ipa_route_tuple_zero(ipa, route_id);
557 }
558
559 /* Configure a filter and route tables; there is no ipa_table_deconfig() */
560 void ipa_table_config(struct ipa *ipa)
561 {
562         ipa_filter_config(ipa, false);
563         ipa_filter_config(ipa, true);
564         ipa_route_config(ipa, false);
565         ipa_route_config(ipa, true);
566 }
567
568 /*
569  * Initialize a coherent DMA allocation containing initialized filter and
570  * route table data.  This is used when initializing or resetting the IPA
571  * filter or route table.
572  *
573  * The first entry in a filter table contains a bitmap indicating which
574  * endpoints contain entries in the table.  In addition to that first entry,
575  * there are at most IPA_FILTER_COUNT_MAX entries that follow.  Filter table
576  * entries are 64 bits wide, and (other than the bitmap) contain the DMA
577  * address of a filter rule.  A "zero rule" indicates no filtering, and
578  * consists of 64 bits of zeroes.  When a filter table is initialized (or
579  * reset) its entries are made to refer to the zero rule.
580  *
581  * Each entry in a route table is the DMA address of a routing rule.  For
582  * routing there is also a 64-bit "zero rule" that means no routing, and
583  * when a route table is initialized or reset, its entries are made to refer
584  * to the zero rule.  The zero rule is shared for route and filter tables.
585  *
586  * Note that the IPA hardware requires a filter or route rule address to be
587  * aligned on a 128 byte boundary.  The coherent DMA buffer we allocate here
588  * has a minimum alignment, and we place the zero rule at the base of that
589  * allocated space.  In ipa_table_init() we verify the minimum DMA allocation
590  * meets our requirement.
591  *
592  *           +-------------------+
593  *       --> |     zero rule     |
594  *      /    |-------------------|
595  *      |    |     filter mask   |
596  *      |\   |-------------------|
597  *      | ---- zero rule address | \
598  *      |\   |-------------------|  |
599  *      | ---- zero rule address |  |   IPA_FILTER_COUNT_MAX
600  *      |    |-------------------|   >  or IPA_ROUTE_COUNT_MAX,
601  *      |             ...           |   whichever is greater
602  *       \   |-------------------|  |
603  *        ---- zero rule address | /
604  *           +-------------------+
605  */
606 int ipa_table_init(struct ipa *ipa)
607 {
608         u32 count = max_t(u32, IPA_FILTER_COUNT_MAX, IPA_ROUTE_COUNT_MAX);
609         struct device *dev = &ipa->pdev->dev;
610         dma_addr_t addr;
611         __le64 le_addr;
612         __le64 *virt;
613         size_t size;
614
615         ipa_table_validate_build();
616
617         /* The IPA hardware requires route and filter table rules to be
618          * aligned on a 128-byte boundary.  We put the "zero rule" at the
619          * base of the table area allocated here.  The DMA address returned
620          * by dma_alloc_coherent() is guaranteed to be a power-of-2 number
621          * of pages, which satisfies the rule alignment requirement.
622          */
623         size = IPA_ZERO_RULE_SIZE + (1 + count) * sizeof(__le64);
624         virt = dma_alloc_coherent(dev, size, &addr, GFP_KERNEL);
625         if (!virt)
626                 return -ENOMEM;
627
628         ipa->table_virt = virt;
629         ipa->table_addr = addr;
630
631         /* First slot is the zero rule */
632         *virt++ = 0;
633
634         /* Next is the filter table bitmap.  The "soft" bitmap value
635          * must be converted to the hardware representation by shifting
636          * it left one position.  (Bit 0 repesents global filtering,
637          * which is possible but not used.)
638          */
639         *virt++ = cpu_to_le64((u64)ipa->filter_map << 1);
640
641         /* All the rest contain the DMA address of the zero rule */
642         le_addr = cpu_to_le64(addr);
643         while (count--)
644                 *virt++ = le_addr;
645
646         return 0;
647 }
648
649 void ipa_table_exit(struct ipa *ipa)
650 {
651         u32 count = max_t(u32, 1 + IPA_FILTER_COUNT_MAX, IPA_ROUTE_COUNT_MAX);
652         struct device *dev = &ipa->pdev->dev;
653         size_t size;
654
655         size = IPA_ZERO_RULE_SIZE + (1 + count) * sizeof(__le64);
656
657         dma_free_coherent(dev, size, ipa->table_virt, ipa->table_addr);
658         ipa->table_addr = 0;
659         ipa->table_virt = NULL;
660 }