drivers/net/ethernet/intel/igb/igb_main.c

   1 /*******************************************************************************
   2
   3   Intel(R) Gigabit Ethernet Linux driver
   4   Copyright(c) 2007-2013 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  24   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  25
  26 *******************************************************************************/
  27
  28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  29
  30 #include <linux/module.h>
  31 #include <linux/types.h>
  32 #include <linux/init.h>
  33 #include <linux/bitops.h>
  34 #include <linux/vmalloc.h>
  35 #include <linux/pagemap.h>
  36 #include <linux/netdevice.h>
  37 #include <linux/ipv6.h>
  38 #include <linux/slab.h>
  39 #include <net/checksum.h>
  40 #include <net/ip6_checksum.h>
  41 #include <linux/net_tstamp.h>
  42 #include <linux/mii.h>
  43 #include <linux/ethtool.h>
  44 #include <linux/if.h>
  45 #include <linux/if_vlan.h>
  46 #include <linux/pci.h>
  47 #include <linux/pci-aspm.h>
  48 #include <linux/delay.h>
  49 #include <linux/interrupt.h>
  50 #include <linux/ip.h>
  51 #include <linux/tcp.h>
  52 #include <linux/sctp.h>
  53 #include <linux/if_ether.h>
  54 #include <linux/aer.h>
  55 #include <linux/prefetch.h>
  56 #include <linux/pm_runtime.h>
  57 #ifdef CONFIG_IGB_DCA
  58 #include <linux/dca.h>
  59 #endif
  60 #include <linux/i2c.h>
  61 #include "igb.h"
  62
  63 #define MAJ 4
  64 #define MIN 1
  65 #define BUILD 2
  66 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
  67 __stringify(BUILD) "-k"
  68 char igb_driver_name[] = "igb";
  69 char igb_driver_version[] = DRV_VERSION;
  70 static const char igb_driver_string[] =
  71                                 "Intel(R) Gigabit Ethernet Network Driver";
  72 static const char igb_copyright[] =
  73                                 "Copyright (c) 2007-2013 Intel Corporation.";
  74
  75 static const struct e1000_info *igb_info_tbl[] = {
  76         [board_82575] = &e1000_82575_info,
  77 };
  78
  79 static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = {
  80         { PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER), board_82575 },
  81         { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER), board_82575 },
  82         { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER), board_82575 },
  83         { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES), board_82575 },
  84         { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SGMII), board_82575 },
  85         { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 },
  86         { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 },
  87         { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 },
  88         { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII), board_82575 },
  89         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
  90         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
  91         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER), board_82575 },
  92         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
  93         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 },
  94         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
  95         { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 },
  96         { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 },
  97         { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE), board_82575 },
  98         { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP), board_82575 },
  99         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
 100         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
 101         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
 102         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
 103         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
 104         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
 105         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2), board_82575 },
 106         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
 107         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
 108         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
 109         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
 110         /* required last entry */
 111         {0, }
 112 };
 113
 114 MODULE_DEVICE_TABLE(pci, igb_pci_tbl);
 115
 116 void igb_reset(struct igb_adapter *);
 117 static int igb_setup_all_tx_resources(struct igb_adapter *);
 118 static int igb_setup_all_rx_resources(struct igb_adapter *);
 119 static void igb_free_all_tx_resources(struct igb_adapter *);
 120 static void igb_free_all_rx_resources(struct igb_adapter *);
 121 static void igb_setup_mrqc(struct igb_adapter *);
 122 static int igb_probe(struct pci_dev *, const struct pci_device_id *);
 123 static void igb_remove(struct pci_dev *pdev);
 124 static int igb_sw_init(struct igb_adapter *);
 125 static int igb_open(struct net_device *);
 126 static int igb_close(struct net_device *);
 127 static void igb_configure(struct igb_adapter *);
 128 static void igb_configure_tx(struct igb_adapter *);
 129 static void igb_configure_rx(struct igb_adapter *);
 130 static void igb_clean_all_tx_rings(struct igb_adapter *);
 131 static void igb_clean_all_rx_rings(struct igb_adapter *);
 132 static void igb_clean_tx_ring(struct igb_ring *);
 133 static void igb_clean_rx_ring(struct igb_ring *);
 134 static void igb_set_rx_mode(struct net_device *);
 135 static void igb_update_phy_info(unsigned long);
 136 static void igb_watchdog(unsigned long);
 137 static void igb_watchdog_task(struct work_struct *);
 138 static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, struct net_device *);
 139 static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *dev,
 140                                                  struct rtnl_link_stats64 *stats);
 141 static int igb_change_mtu(struct net_device *, int);
 142 static int igb_set_mac(struct net_device *, void *);
 143 static void igb_set_uta(struct igb_adapter *adapter);
 144 static irqreturn_t igb_intr(int irq, void *);
 145 static irqreturn_t igb_intr_msi(int irq, void *);
 146 static irqreturn_t igb_msix_other(int irq, void *);
 147 static irqreturn_t igb_msix_ring(int irq, void *);
 148 #ifdef CONFIG_IGB_DCA
 149 static void igb_update_dca(struct igb_q_vector *);
 150 static void igb_setup_dca(struct igb_adapter *);
 151 #endif /* CONFIG_IGB_DCA */
 152 static int igb_poll(struct napi_struct *, int);
 153 static bool igb_clean_tx_irq(struct igb_q_vector *);
 154 static bool igb_clean_rx_irq(struct igb_q_vector *, int);
 155 static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
 156 static void igb_tx_timeout(struct net_device *);
 157 static void igb_reset_task(struct work_struct *);
 158 static void igb_vlan_mode(struct net_device *netdev, netdev_features_t features);
 159 static int igb_vlan_rx_add_vid(struct net_device *, u16);
 160 static int igb_vlan_rx_kill_vid(struct net_device *, u16);
 161 static void igb_restore_vlan(struct igb_adapter *);
 162 static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
 163 static void igb_ping_all_vfs(struct igb_adapter *);
 164 static void igb_msg_task(struct igb_adapter *);
 165 static void igb_vmm_control(struct igb_adapter *);
 166 static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
 167 static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
 168 static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
 169 static int igb_ndo_set_vf_vlan(struct net_device *netdev,
 170                                int vf, u16 vlan, u8 qos);
 171 static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
 172 static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
 173                                  struct ifla_vf_info *ivi);
 174 static void igb_check_vf_rate_limit(struct igb_adapter *);
 175
 176 #ifdef CONFIG_PCI_IOV
 177 static int igb_vf_configure(struct igb_adapter *adapter, int vf);
 178 static bool igb_vfs_are_assigned(struct igb_adapter *adapter);
 179 #endif
 180
 181 #ifdef CONFIG_PM
 182 #ifdef CONFIG_PM_SLEEP
 183 static int igb_suspend(struct device *);
 184 #endif
 185 static int igb_resume(struct device *);
 186 #ifdef CONFIG_PM_RUNTIME
 187 static int igb_runtime_suspend(struct device *dev);
 188 static int igb_runtime_resume(struct device *dev);
 189 static int igb_runtime_idle(struct device *dev);
 190 #endif
 191 static const struct dev_pm_ops igb_pm_ops = {
 192         SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume)
 193         SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume,
 194                         igb_runtime_idle)
 195 };
 196 #endif
 197 static void igb_shutdown(struct pci_dev *);
 198 static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
 199 #ifdef CONFIG_IGB_DCA
 200 static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
 201 static struct notifier_block dca_notifier = {
 202         .notifier_call  = igb_notify_dca,
 203         .next           = NULL,
 204         .priority       = 0
 205 };
 206 #endif
 207 #ifdef CONFIG_NET_POLL_CONTROLLER
 208 /* for netdump / net console */
 209 static void igb_netpoll(struct net_device *);
 210 #endif
 211 #ifdef CONFIG_PCI_IOV
 212 static unsigned int max_vfs = 0;
 213 module_param(max_vfs, uint, 0);
 214 MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate "
 215                  "per physical function");
 216 #endif /* CONFIG_PCI_IOV */
 217
 218 static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
 219                      pci_channel_state_t);
 220 static pci_ers_result_t igb_io_slot_reset(struct pci_dev *);
 221 static void igb_io_resume(struct pci_dev *);
 222
 223 static const struct pci_error_handlers igb_err_handler = {
 224         .error_detected = igb_io_error_detected,
 225         .slot_reset = igb_io_slot_reset,
 226         .resume = igb_io_resume,
 227 };
 228
 229 static void igb_init_dmac(struct igb_adapter *adapter, u32 pba);
 230
 231 static struct pci_driver igb_driver = {
 232         .name     = igb_driver_name,
 233         .id_table = igb_pci_tbl,
 234         .probe    = igb_probe,
 235         .remove   = igb_remove,
 236 #ifdef CONFIG_PM
 237         .driver.pm = &igb_pm_ops,
 238 #endif
 239         .shutdown = igb_shutdown,
 240         .sriov_configure = igb_pci_sriov_configure,
 241         .err_handler = &igb_err_handler
 242 };
 243
 244 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
 245 MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
 246 MODULE_LICENSE("GPL");
 247 MODULE_VERSION(DRV_VERSION);
 248
 249 #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
 250 static int debug = -1;
 251 module_param(debug, int, 0);
 252 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 253
 254 struct igb_reg_info {
 255         u32 ofs;
 256         char *name;
 257 };
 258
 259 static const struct igb_reg_info igb_reg_info_tbl[] = {
 260
 261         /* General Registers */
 262         {E1000_CTRL, "CTRL"},
 263         {E1000_STATUS, "STATUS"},
 264         {E1000_CTRL_EXT, "CTRL_EXT"},
 265
 266         /* Interrupt Registers */
 267         {E1000_ICR, "ICR"},
 268
 269         /* RX Registers */
 270         {E1000_RCTL, "RCTL"},
 271         {E1000_RDLEN(0), "RDLEN"},
 272         {E1000_RDH(0), "RDH"},
 273         {E1000_RDT(0), "RDT"},
 274         {E1000_RXDCTL(0), "RXDCTL"},
 275         {E1000_RDBAL(0), "RDBAL"},
 276         {E1000_RDBAH(0), "RDBAH"},
 277
 278         /* TX Registers */
 279         {E1000_TCTL, "TCTL"},
 280         {E1000_TDBAL(0), "TDBAL"},
 281         {E1000_TDBAH(0), "TDBAH"},
 282         {E1000_TDLEN(0), "TDLEN"},
 283         {E1000_TDH(0), "TDH"},
 284         {E1000_TDT(0), "TDT"},
 285         {E1000_TXDCTL(0), "TXDCTL"},
 286         {E1000_TDFH, "TDFH"},
 287         {E1000_TDFT, "TDFT"},
 288         {E1000_TDFHS, "TDFHS"},
 289         {E1000_TDFPC, "TDFPC"},
 290
 291         /* List Terminator */
 292         {}
 293 };
 294
 295 /*
 296  * igb_regdump - register printout routine
 297  */
 298 static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo)
 299 {
 300         int n = 0;
 301         char rname[16];
 302         u32 regs[8];
 303
 304         switch (reginfo->ofs) {
 305         case E1000_RDLEN(0):
 306                 for (n = 0; n < 4; n++)
 307                         regs[n] = rd32(E1000_RDLEN(n));
 308                 break;
 309         case E1000_RDH(0):
 310                 for (n = 0; n < 4; n++)
 311                         regs[n] = rd32(E1000_RDH(n));
 312                 break;
 313         case E1000_RDT(0):
 314                 for (n = 0; n < 4; n++)
 315                         regs[n] = rd32(E1000_RDT(n));
 316                 break;
 317         case E1000_RXDCTL(0):
 318                 for (n = 0; n < 4; n++)
 319                         regs[n] = rd32(E1000_RXDCTL(n));
 320                 break;
 321         case E1000_RDBAL(0):
 322                 for (n = 0; n < 4; n++)
 323                         regs[n] = rd32(E1000_RDBAL(n));
 324                 break;
 325         case E1000_RDBAH(0):
 326                 for (n = 0; n < 4; n++)
 327                         regs[n] = rd32(E1000_RDBAH(n));
 328                 break;
 329         case E1000_TDBAL(0):
 330                 for (n = 0; n < 4; n++)
 331                         regs[n] = rd32(E1000_RDBAL(n));
 332                 break;
 333         case E1000_TDBAH(0):
 334                 for (n = 0; n < 4; n++)
 335                         regs[n] = rd32(E1000_TDBAH(n));
 336                 break;
 337         case E1000_TDLEN(0):
 338                 for (n = 0; n < 4; n++)
 339                         regs[n] = rd32(E1000_TDLEN(n));
 340                 break;
 341         case E1000_TDH(0):
 342                 for (n = 0; n < 4; n++)
 343                         regs[n] = rd32(E1000_TDH(n));
 344                 break;
 345         case E1000_TDT(0):
 346                 for (n = 0; n < 4; n++)
 347                         regs[n] = rd32(E1000_TDT(n));
 348                 break;
 349         case E1000_TXDCTL(0):
 350                 for (n = 0; n < 4; n++)
 351                         regs[n] = rd32(E1000_TXDCTL(n));
 352                 break;
 353         default:
 354                 pr_info("%-15s %08x\n", reginfo->name, rd32(reginfo->ofs));
 355                 return;
 356         }
 357
 358         snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
 359         pr_info("%-15s %08x %08x %08x %08x\n", rname, regs[0], regs[1],
 360                 regs[2], regs[3]);
 361 }
 362
 363 /*
 364  * igb_dump - Print registers, tx-rings and rx-rings
 365  */
 366 static void igb_dump(struct igb_adapter *adapter)
 367 {
 368         struct net_device *netdev = adapter->netdev;
 369         struct e1000_hw *hw = &adapter->hw;
 370         struct igb_reg_info *reginfo;
 371         struct igb_ring *tx_ring;
 372         union e1000_adv_tx_desc *tx_desc;
 373         struct my_u0 { u64 a; u64 b; } *u0;
 374         struct igb_ring *rx_ring;
 375         union e1000_adv_rx_desc *rx_desc;
 376         u32 staterr;
 377         u16 i, n;
 378
 379         if (!netif_msg_hw(adapter))
 380                 return;
 381
 382         /* Print netdevice Info */
 383         if (netdev) {
 384                 dev_info(&adapter->pdev->dev, "Net device Info\n");
 385                 pr_info("Device Name     state            trans_start      "
 386                         "last_rx\n");
 387                 pr_info("%-15s %016lX %016lX %016lX\n", netdev->name,
 388                         netdev->state, netdev->trans_start, netdev->last_rx);
 389         }
 390
 391         /* Print Registers */
 392         dev_info(&adapter->pdev->dev, "Register Dump\n");
 393         pr_info(" Register Name   Value\n");
 394         for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
 395              reginfo->name; reginfo++) {
 396                 igb_regdump(hw, reginfo);
 397         }
 398
 399         /* Print TX Ring Summary */
 400         if (!netdev || !netif_running(netdev))
 401                 goto exit;
 402
 403         dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
 404         pr_info("Queue [NTU] [NTC] [bi(ntc)->dma  ] leng ntw timestamp\n");
 405         for (n = 0; n < adapter->num_tx_queues; n++) {
 406                 struct igb_tx_buffer *buffer_info;
 407                 tx_ring = adapter->tx_ring[n];
 408                 buffer_info = &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
 409                 pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n",
 410                         n, tx_ring->next_to_use, tx_ring->next_to_clean,
 411                         (u64)dma_unmap_addr(buffer_info, dma),
 412                         dma_unmap_len(buffer_info, len),
 413                         buffer_info->next_to_watch,
 414                         (u64)buffer_info->time_stamp);
 415         }
 416
 417         /* Print TX Rings */
 418         if (!netif_msg_tx_done(adapter))
 419                 goto rx_ring_summary;
 420
 421         dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
 422
 423         /* Transmit Descriptor Formats
 424          *
 425          * Advanced Transmit Descriptor
 426          *   +--------------------------------------------------------------+
 427          * 0 |         Buffer Address [63:0]                                |
 428          *   +--------------------------------------------------------------+
 429          * 8 | PAYLEN  | PORTS  |CC|IDX | STA | DCMD  |DTYP|MAC|RSV| DTALEN |
 430          *   +--------------------------------------------------------------+
 431          *   63      46 45    40 39 38 36 35 32 31   24             15       0
 432          */
 433
 434         for (n = 0; n < adapter->num_tx_queues; n++) {
 435                 tx_ring = adapter->tx_ring[n];
 436                 pr_info("------------------------------------\n");
 437                 pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
 438                 pr_info("------------------------------------\n");
 439                 pr_info("T [desc]     [address 63:0  ] [PlPOCIStDDM Ln] "
 440                         "[bi->dma       ] leng  ntw timestamp        "
 441                         "bi->skb\n");
 442
 443                 for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
 444                         const char *next_desc;
 445                         struct igb_tx_buffer *buffer_info;
 446                         tx_desc = IGB_TX_DESC(tx_ring, i);
 447                         buffer_info = &tx_ring->tx_buffer_info[i];
 448                         u0 = (struct my_u0 *)tx_desc;
 449                         if (i == tx_ring->next_to_use &&
 450                             i == tx_ring->next_to_clean)
 451                                 next_desc = " NTC/U";
 452                         else if (i == tx_ring->next_to_use)
 453                                 next_desc = " NTU";
 454                         else if (i == tx_ring->next_to_clean)
 455                                 next_desc = " NTC";
 456                         else
 457                                 next_desc = "";
 458
 459                         pr_info("T [0x%03X]    %016llX %016llX %016llX"
 460                                 " %04X  %p %016llX %p%s\n", i,
 461                                 le64_to_cpu(u0->a),
 462                                 le64_to_cpu(u0->b),
 463                                 (u64)dma_unmap_addr(buffer_info, dma),
 464                                 dma_unmap_len(buffer_info, len),
 465                                 buffer_info->next_to_watch,
 466                                 (u64)buffer_info->time_stamp,
 467                                 buffer_info->skb, next_desc);
 468
 469                         if (netif_msg_pktdata(adapter) && buffer_info->skb)
 470                                 print_hex_dump(KERN_INFO, "",
 471                                         DUMP_PREFIX_ADDRESS,
 472                                         16, 1, buffer_info->skb->data,
 473                                         dma_unmap_len(buffer_info, len),
 474                                         true);
 475                 }
 476         }
 477
 478         /* Print RX Rings Summary */
 479 rx_ring_summary:
 480         dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
 481         pr_info("Queue [NTU] [NTC]\n");
 482         for (n = 0; n < adapter->num_rx_queues; n++) {
 483                 rx_ring = adapter->rx_ring[n];
 484                 pr_info(" %5d %5X %5X\n",
 485                         n, rx_ring->next_to_use, rx_ring->next_to_clean);
 486         }
 487
 488         /* Print RX Rings */
 489         if (!netif_msg_rx_status(adapter))
 490                 goto exit;
 491
 492         dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
 493
 494         /* Advanced Receive Descriptor (Read) Format
 495          *    63                                           1        0
 496          *    +-----------------------------------------------------+
 497          *  0 |       Packet Buffer Address [63:1]           |A0/NSE|
 498          *    +----------------------------------------------+------+
 499          *  8 |       Header Buffer Address [63:1]           |  DD  |
 500          *    +-----------------------------------------------------+
 501          *
 502          *
 503          * Advanced Receive Descriptor (Write-Back) Format
 504          *
 505          *   63       48 47    32 31  30      21 20 17 16   4 3     0
 506          *   +------------------------------------------------------+
 507          * 0 | Packet     IP     |SPH| HDR_LEN   | RSV|Packet|  RSS |
 508          *   | Checksum   Ident  |   |           |    | Type | Type |
 509          *   +------------------------------------------------------+
 510          * 8 | VLAN Tag | Length | Extended Error | Extended Status |
 511          *   +------------------------------------------------------+
 512          *   63       48 47    32 31            20 19               0
 513          */
 514
 515         for (n = 0; n < adapter->num_rx_queues; n++) {
 516                 rx_ring = adapter->rx_ring[n];
 517                 pr_info("------------------------------------\n");
 518                 pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
 519                 pr_info("------------------------------------\n");
 520                 pr_info("R  [desc]      [ PktBuf     A0] [  HeadBuf   DD] "
 521                         "[bi->dma       ] [bi->skb] <-- Adv Rx Read format\n");
 522                 pr_info("RWB[desc]      [PcsmIpSHl PtRs] [vl er S cks ln] -----"
 523                         "----------- [bi->skb] <-- Adv Rx Write-Back format\n");
 524
 525                 for (i = 0; i < rx_ring->count; i++) {
 526                         const char *next_desc;
 527                         struct igb_rx_buffer *buffer_info;
 528                         buffer_info = &rx_ring->rx_buffer_info[i];
 529                         rx_desc = IGB_RX_DESC(rx_ring, i);
 530                         u0 = (struct my_u0 *)rx_desc;
 531                         staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 532
 533                         if (i == rx_ring->next_to_use)
 534                                 next_desc = " NTU";
 535                         else if (i == rx_ring->next_to_clean)
 536                                 next_desc = " NTC";
 537                         else
 538                                 next_desc = "";
 539
 540                         if (staterr & E1000_RXD_STAT_DD) {
 541                                 /* Descriptor Done */
 542                                 pr_info("%s[0x%03X]     %016llX %016llX ---------------- %s\n",
 543                                         "RWB", i,
 544                                         le64_to_cpu(u0->a),
 545                                         le64_to_cpu(u0->b),
 546                                         next_desc);
 547                         } else {
 548                                 pr_info("%s[0x%03X]     %016llX %016llX %016llX %s\n",
 549                                         "R  ", i,
 550                                         le64_to_cpu(u0->a),
 551                                         le64_to_cpu(u0->b),
 552                                         (u64)buffer_info->dma,
 553                                         next_desc);
 554
 555                                 if (netif_msg_pktdata(adapter) &&
 556                                     buffer_info->dma && buffer_info->page) {
 557                                         print_hex_dump(KERN_INFO, "",
 558                                           DUMP_PREFIX_ADDRESS,
 559                                           16, 1,
 560                                           page_address(buffer_info->page) +
 561                                                       buffer_info->page_offset,
 562                                           IGB_RX_BUFSZ, true);
 563                                 }
 564                         }
 565                 }
 566         }
 567
 568 exit:
 569         return;
 570 }
 571
 572 /*  igb_get_i2c_data - Reads the I2C SDA data bit
 573  *  @hw: pointer to hardware structure
 574  *  @i2cctl: Current value of I2CCTL register
 575  *
 576  *  Returns the I2C data bit value
 577  */
 578 static int igb_get_i2c_data(void *data)
 579 {
 580         struct igb_adapter *adapter = (struct igb_adapter *)data;
 581         struct e1000_hw *hw = &adapter->hw;
 582         s32 i2cctl = rd32(E1000_I2CPARAMS);
 583
 584         return ((i2cctl & E1000_I2C_DATA_IN) != 0);
 585 }
 586
 587 /* igb_set_i2c_data - Sets the I2C data bit
 588  *  @data: pointer to hardware structure
 589  *  @state: I2C data value (0 or 1) to set
 590  *
 591  *  Sets the I2C data bit
 592  */
 593 static void igb_set_i2c_data(void *data, int state)
 594 {
 595         struct igb_adapter *adapter = (struct igb_adapter *)data;
 596         struct e1000_hw *hw = &adapter->hw;
 597         s32 i2cctl = rd32(E1000_I2CPARAMS);
 598
 599         if (state)
 600                 i2cctl |= E1000_I2C_DATA_OUT;
 601         else
 602                 i2cctl &= ~E1000_I2C_DATA_OUT;
 603
 604         i2cctl &= ~E1000_I2C_DATA_OE_N;
 605         i2cctl |= E1000_I2C_CLK_OE_N;
 606         wr32(E1000_I2CPARAMS, i2cctl);
 607         wrfl();
 608
 609 }
 610
 611 /* igb_set_i2c_clk - Sets the I2C SCL clock
 612  *  @data: pointer to hardware structure
 613  *  @state: state to set clock
 614  *
 615  *  Sets the I2C clock line to state
 616  */
 617 static void igb_set_i2c_clk(void *data, int state)
 618 {
 619         struct igb_adapter *adapter = (struct igb_adapter *)data;
 620         struct e1000_hw *hw = &adapter->hw;
 621         s32 i2cctl = rd32(E1000_I2CPARAMS);
 622
 623         if (state) {
 624                 i2cctl |= E1000_I2C_CLK_OUT;
 625                 i2cctl &= ~E1000_I2C_CLK_OE_N;
 626         } else {
 627                 i2cctl &= ~E1000_I2C_CLK_OUT;
 628                 i2cctl &= ~E1000_I2C_CLK_OE_N;
 629         }
 630         wr32(E1000_I2CPARAMS, i2cctl);
 631         wrfl();
 632 }
 633
 634 /* igb_get_i2c_clk - Gets the I2C SCL clock state
 635  *  @data: pointer to hardware structure
 636  *
 637  *  Gets the I2C clock state
 638  */
 639 static int igb_get_i2c_clk(void *data)
 640 {
 641         struct igb_adapter *adapter = (struct igb_adapter *)data;
 642         struct e1000_hw *hw = &adapter->hw;
 643         s32 i2cctl = rd32(E1000_I2CPARAMS);
 644
 645         return ((i2cctl & E1000_I2C_CLK_IN) != 0);
 646 }
 647
 648 static const struct i2c_algo_bit_data igb_i2c_algo = {
 649         .setsda         = igb_set_i2c_data,
 650         .setscl         = igb_set_i2c_clk,
 651         .getsda         = igb_get_i2c_data,
 652         .getscl         = igb_get_i2c_clk,
 653         .udelay         = 5,
 654         .timeout        = 20,
 655 };
 656
 657 /**
 658  * igb_get_hw_dev - return device
 659  * used by hardware layer to print debugging information
 660  **/
 661 struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
 662 {
 663         struct igb_adapter *adapter = hw->back;
 664         return adapter->netdev;
 665 }
 666
 667 /**
 668  * igb_init_module - Driver Registration Routine
 669  *
 670  * igb_init_module is the first routine called when the driver is
 671  * loaded. All it does is register with the PCI subsystem.
 672  **/
 673 static int __init igb_init_module(void)
 674 {
 675         int ret;
 676         pr_info("%s - version %s\n",
 677                igb_driver_string, igb_driver_version);
 678
 679         pr_info("%s\n", igb_copyright);
 680
 681 #ifdef CONFIG_IGB_DCA
 682         dca_register_notify(&dca_notifier);
 683 #endif
 684         ret = pci_register_driver(&igb_driver);
 685         return ret;
 686 }
 687
 688 module_init(igb_init_module);
 689
 690 /**
 691  * igb_exit_module - Driver Exit Cleanup Routine
 692  *
 693  * igb_exit_module is called just before the driver is removed
 694  * from memory.
 695  **/
 696 static void __exit igb_exit_module(void)
 697 {
 698 #ifdef CONFIG_IGB_DCA
 699         dca_unregister_notify(&dca_notifier);
 700 #endif
 701         pci_unregister_driver(&igb_driver);
 702 }
 703
 704 module_exit(igb_exit_module);
 705
 706 #define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
 707 /**
 708  * igb_cache_ring_register - Descriptor ring to register mapping
 709  * @adapter: board private structure to initialize
 710  *
 711  * Once we know the feature-set enabled for the device, we'll cache
 712  * the register offset the descriptor ring is assigned to.
 713  **/
 714 static void igb_cache_ring_register(struct igb_adapter *adapter)
 715 {
 716         int i = 0, j = 0;
 717         u32 rbase_offset = adapter->vfs_allocated_count;
 718
 719         switch (adapter->hw.mac.type) {
 720         case e1000_82576:
 721                 /* The queues are allocated for virtualization such that VF 0
 722                  * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
 723                  * In order to avoid collision we start at the first free queue
 724                  * and continue consuming queues in the same sequence
 725                  */
 726                 if (adapter->vfs_allocated_count) {
 727                         for (; i < adapter->rss_queues; i++)
 728                                 adapter->rx_ring[i]->reg_idx = rbase_offset +
 729                                                                Q_IDX_82576(i);
 730                 }
 731         case e1000_82575:
 732         case e1000_82580:
 733         case e1000_i350:
 734         case e1000_i210:
 735         case e1000_i211:
 736         default:
 737                 for (; i < adapter->num_rx_queues; i++)
 738                         adapter->rx_ring[i]->reg_idx = rbase_offset + i;
 739                 for (; j < adapter->num_tx_queues; j++)
 740                         adapter->tx_ring[j]->reg_idx = rbase_offset + j;
 741                 break;
 742         }
 743 }
 744
 745 /**
 746  *  igb_write_ivar - configure ivar for given MSI-X vector
 747  *  @hw: pointer to the HW structure
 748  *  @msix_vector: vector number we are allocating to a given ring
 749  *  @index: row index of IVAR register to write within IVAR table
 750  *  @offset: column offset of in IVAR, should be multiple of 8
 751  *
 752  *  This function is intended to handle the writing of the IVAR register
 753  *  for adapters 82576 and newer.  The IVAR table consists of 2 columns,
 754  *  each containing an cause allocation for an Rx and Tx ring, and a
 755  *  variable number of rows depending on the number of queues supported.
 756  **/
 757 static void igb_write_ivar(struct e1000_hw *hw, int msix_vector,
 758                            int index, int offset)
 759 {
 760         u32 ivar = array_rd32(E1000_IVAR0, index);
 761
 762         /* clear any bits that are currently set */
 763         ivar &= ~((u32)0xFF << offset);
 764
 765         /* write vector and valid bit */
 766         ivar |= (msix_vector | E1000_IVAR_VALID) << offset;
 767
 768         array_wr32(E1000_IVAR0, index, ivar);
 769 }
 770
 771 #define IGB_N0_QUEUE -1
 772 static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
 773 {
 774         struct igb_adapter *adapter = q_vector->adapter;
 775         struct e1000_hw *hw = &adapter->hw;
 776         int rx_queue = IGB_N0_QUEUE;
 777         int tx_queue = IGB_N0_QUEUE;
 778         u32 msixbm = 0;
 779
 780         if (q_vector->rx.ring)
 781                 rx_queue = q_vector->rx.ring->reg_idx;
 782         if (q_vector->tx.ring)
 783                 tx_queue = q_vector->tx.ring->reg_idx;
 784
 785         switch (hw->mac.type) {
 786         case e1000_82575:
 787                 /* The 82575 assigns vectors using a bitmask, which matches the
 788                    bitmask for the EICR/EIMS/EIMC registers.  To assign one
 789                    or more queues to a vector, we write the appropriate bits
 790                    into the MSIXBM register for that vector. */
 791                 if (rx_queue > IGB_N0_QUEUE)
 792                         msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
 793                 if (tx_queue > IGB_N0_QUEUE)
 794                         msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
 795                 if (!adapter->msix_entries && msix_vector == 0)
 796                         msixbm |= E1000_EIMS_OTHER;
 797                 array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
 798                 q_vector->eims_value = msixbm;
 799                 break;
 800         case e1000_82576:
 801                 /*
 802                  * 82576 uses a table that essentially consists of 2 columns
 803                  * with 8 rows.  The ordering is column-major so we use the
 804                  * lower 3 bits as the row index, and the 4th bit as the
 805                  * column offset.
 806                  */
 807                 if (rx_queue > IGB_N0_QUEUE)
 808                         igb_write_ivar(hw, msix_vector,
 809                                        rx_queue & 0x7,
 810                                        (rx_queue & 0x8) << 1);
 811                 if (tx_queue > IGB_N0_QUEUE)
 812                         igb_write_ivar(hw, msix_vector,
 813                                        tx_queue & 0x7,
 814                                        ((tx_queue & 0x8) << 1) + 8);
 815                 q_vector->eims_value = 1 << msix_vector;
 816                 break;
 817         case e1000_82580:
 818         case e1000_i350:
 819         case e1000_i210:
 820         case e1000_i211:
 821                 /*
 822                  * On 82580 and newer adapters the scheme is similar to 82576
 823                  * however instead of ordering column-major we have things
 824                  * ordered row-major.  So we traverse the table by using
 825                  * bit 0 as the column offset, and the remaining bits as the
 826                  * row index.
 827                  */
 828                 if (rx_queue > IGB_N0_QUEUE)
 829                         igb_write_ivar(hw, msix_vector,
 830                                        rx_queue >> 1,
 831                                        (rx_queue & 0x1) << 4);
 832                 if (tx_queue > IGB_N0_QUEUE)
 833                         igb_write_ivar(hw, msix_vector,
 834                                        tx_queue >> 1,
 835                                        ((tx_queue & 0x1) << 4) + 8);
 836                 q_vector->eims_value = 1 << msix_vector;
 837                 break;
 838         default:
 839                 BUG();
 840                 break;
 841         }
 842
 843         /* add q_vector eims value to global eims_enable_mask */
 844         adapter->eims_enable_mask |= q_vector->eims_value;
 845
 846         /* configure q_vector to set itr on first interrupt */
 847         q_vector->set_itr = 1;
 848 }
 849
 850 /**
 851  * igb_configure_msix - Configure MSI-X hardware
 852  *
 853  * igb_configure_msix sets up the hardware to properly
 854  * generate MSI-X interrupts.
 855  **/
 856 static void igb_configure_msix(struct igb_adapter *adapter)
 857 {
 858         u32 tmp;
 859         int i, vector = 0;
 860         struct e1000_hw *hw = &adapter->hw;
 861
 862         adapter->eims_enable_mask = 0;
 863
 864         /* set vector for other causes, i.e. link changes */
 865         switch (hw->mac.type) {
 866         case e1000_82575:
 867                 tmp = rd32(E1000_CTRL_EXT);
 868                 /* enable MSI-X PBA support*/
 869                 tmp |= E1000_CTRL_EXT_PBA_CLR;
 870
 871                 /* Auto-Mask interrupts upon ICR read. */
 872                 tmp |= E1000_CTRL_EXT_EIAME;
 873                 tmp |= E1000_CTRL_EXT_IRCA;
 874
 875                 wr32(E1000_CTRL_EXT, tmp);
 876
 877                 /* enable msix_other interrupt */
 878                 array_wr32(E1000_MSIXBM(0), vector++,
 879                                       E1000_EIMS_OTHER);
 880                 adapter->eims_other = E1000_EIMS_OTHER;
 881
 882                 break;
 883
 884         case e1000_82576:
 885         case e1000_82580:
 886         case e1000_i350:
 887         case e1000_i210:
 888         case e1000_i211:
 889                 /* Turn on MSI-X capability first, or our settings
 890                  * won't stick.  And it will take days to debug. */
 891                 wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
 892                                 E1000_GPIE_PBA | E1000_GPIE_EIAME |
 893                                 E1000_GPIE_NSICR);
 894
 895                 /* enable msix_other interrupt */
 896                 adapter->eims_other = 1 << vector;
 897                 tmp = (vector++ | E1000_IVAR_VALID) << 8;
 898
 899                 wr32(E1000_IVAR_MISC, tmp);
 900                 break;
 901         default:
 902                 /* do nothing, since nothing else supports MSI-X */
 903                 break;
 904         } /* switch (hw->mac.type) */
 905
 906         adapter->eims_enable_mask |= adapter->eims_other;
 907
 908         for (i = 0; i < adapter->num_q_vectors; i++)
 909                 igb_assign_vector(adapter->q_vector[i], vector++);
 910
 911         wrfl();
 912 }
 913
 914 /**
 915  * igb_request_msix - Initialize MSI-X interrupts
 916  *
 917  * igb_request_msix allocates MSI-X vectors and requests interrupts from the
 918  * kernel.
 919  **/
 920 static int igb_request_msix(struct igb_adapter *adapter)
 921 {
 922         struct net_device *netdev = adapter->netdev;
 923         struct e1000_hw *hw = &adapter->hw;
 924         int i, err = 0, vector = 0, free_vector = 0;
 925
 926         err = request_irq(adapter->msix_entries[vector].vector,
 927                           igb_msix_other, 0, netdev->name, adapter);
 928         if (err)
 929                 goto err_out;
 930
 931         for (i = 0; i < adapter->num_q_vectors; i++) {
 932                 struct igb_q_vector *q_vector = adapter->q_vector[i];
 933
 934                 vector++;
 935
 936                 q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
 937
 938                 if (q_vector->rx.ring && q_vector->tx.ring)
 939                         sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
 940                                 q_vector->rx.ring->queue_index);
 941                 else if (q_vector->tx.ring)
 942                         sprintf(q_vector->name, "%s-tx-%u", netdev->name,
 943                                 q_vector->tx.ring->queue_index);
 944                 else if (q_vector->rx.ring)
 945                         sprintf(q_vector->name, "%s-rx-%u", netdev->name,
 946                                 q_vector->rx.ring->queue_index);
 947                 else
 948                         sprintf(q_vector->name, "%s-unused", netdev->name);
 949
 950                 err = request_irq(adapter->msix_entries[vector].vector,
 951                                   igb_msix_ring, 0, q_vector->name,
 952                                   q_vector);
 953                 if (err)
 954                         goto err_free;
 955         }
 956
 957         igb_configure_msix(adapter);
 958         return 0;
 959
 960 err_free:
 961         /* free already assigned IRQs */
 962         free_irq(adapter->msix_entries[free_vector++].vector, adapter);
 963
 964         vector--;
 965         for (i = 0; i < vector; i++) {
 966                 free_irq(adapter->msix_entries[free_vector++].vector,
 967                          adapter->q_vector[i]);
 968         }
 969 err_out:
 970         return err;
 971 }
 972
 973 static void igb_reset_interrupt_capability(struct igb_adapter *adapter)
 974 {
 975         if (adapter->msix_entries) {
 976                 pci_disable_msix(adapter->pdev);
 977                 kfree(adapter->msix_entries);
 978                 adapter->msix_entries = NULL;
 979         } else if (adapter->flags & IGB_FLAG_HAS_MSI) {
 980                 pci_disable_msi(adapter->pdev);
 981         }
 982 }
 983
 984 /**
 985  * igb_free_q_vector - Free memory allocated for specific interrupt vector
 986  * @adapter: board private structure to initialize
 987  * @v_idx: Index of vector to be freed
 988  *
 989  * This function frees the memory allocated to the q_vector.  In addition if
 990  * NAPI is enabled it will delete any references to the NAPI struct prior
 991  * to freeing the q_vector.
 992  **/
 993 static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx)
 994 {
 995         struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
 996
 997         if (q_vector->tx.ring)
 998                 adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL;
 999
1000         if (q_vector->rx.ring)
1001                 adapter->tx_ring[q_vector->rx.ring->queue_index] = NULL;
1002
1003         adapter->q_vector[v_idx] = NULL;
1004         netif_napi_del(&q_vector->napi);
1005
1006         /*
1007          * ixgbe_get_stats64() might access the rings on this vector,
1008          * we must wait a grace period before freeing it.
1009          */
1010         kfree_rcu(q_vector, rcu);
1011 }
1012
1013 /**
1014  * igb_free_q_vectors - Free memory allocated for interrupt vectors
1015  * @adapter: board private structure to initialize
1016  *
1017  * This function frees the memory allocated to the q_vectors.  In addition if
1018  * NAPI is enabled it will delete any references to the NAPI struct prior
1019  * to freeing the q_vector.
1020  **/
1021 static void igb_free_q_vectors(struct igb_adapter *adapter)
1022 {
1023         int v_idx = adapter->num_q_vectors;
1024
1025         adapter->num_tx_queues = 0;
1026         adapter->num_rx_queues = 0;
1027         adapter->num_q_vectors = 0;
1028
1029         while (v_idx--)
1030                 igb_free_q_vector(adapter, v_idx);
1031 }
1032
1033 /**
1034  * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
1035  *
1036  * This function resets the device so that it has 0 rx queues, tx queues, and
1037  * MSI-X interrupts allocated.
1038  */
1039 static void igb_clear_interrupt_scheme(struct igb_adapter *adapter)
1040 {
1041         igb_free_q_vectors(adapter);
1042         igb_reset_interrupt_capability(adapter);
1043 }
1044
1045 /**
1046  * igb_set_interrupt_capability - set MSI or MSI-X if supported
1047  *
1048  * Attempt to configure interrupts using the best available
1049  * capabilities of the hardware and kernel.
1050  **/
1051 static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix)
1052 {
1053         int err;
1054         int numvecs, i;
1055
1056         if (!msix)
1057                 goto msi_only;
1058
1059         /* Number of supported queues. */
1060         adapter->num_rx_queues = adapter->rss_queues;
1061         if (adapter->vfs_allocated_count)
1062                 adapter->num_tx_queues = 1;
1063         else
1064                 adapter->num_tx_queues = adapter->rss_queues;
1065
1066         /* start with one vector for every rx queue */
1067         numvecs = adapter->num_rx_queues;
1068
1069         /* if tx handler is separate add 1 for every tx queue */
1070         if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
1071                 numvecs += adapter->num_tx_queues;
1072
1073         /* store the number of vectors reserved for queues */
1074         adapter->num_q_vectors = numvecs;
1075
1076         /* add 1 vector for link status interrupts */
1077         numvecs++;
1078         adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry),
1079                                         GFP_KERNEL);
1080
1081         if (!adapter->msix_entries)
1082                 goto msi_only;
1083
1084         for (i = 0; i < numvecs; i++)
1085                 adapter->msix_entries[i].entry = i;
1086
1087         err = pci_enable_msix(adapter->pdev,
1088                               adapter->msix_entries,
1089                               numvecs);
1090         if (err == 0)
1091                 return;
1092
1093         igb_reset_interrupt_capability(adapter);
1094
1095         /* If we can't do MSI-X, try MSI */
1096 msi_only:
1097 #ifdef CONFIG_PCI_IOV
1098         /* disable SR-IOV for non MSI-X configurations */
1099         if (adapter->vf_data) {
1100                 struct e1000_hw *hw = &adapter->hw;
1101                 /* disable iov and allow time for transactions to clear */
1102                 pci_disable_sriov(adapter->pdev);
1103                 msleep(500);
1104
1105                 kfree(adapter->vf_data);
1106                 adapter->vf_data = NULL;
1107                 wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
1108                 wrfl();
1109                 msleep(100);
1110                 dev_info(&adapter->pdev->dev, "IOV Disabled\n");
1111         }
1112 #endif
1113         adapter->vfs_allocated_count = 0;
1114         adapter->rss_queues = 1;
1115         adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
1116         adapter->num_rx_queues = 1;
1117         adapter->num_tx_queues = 1;
1118         adapter->num_q_vectors = 1;
1119         if (!pci_enable_msi(adapter->pdev))
1120                 adapter->flags |= IGB_FLAG_HAS_MSI;
1121 }
1122
1123 static void igb_add_ring(struct igb_ring *ring,
1124                          struct igb_ring_container *head)
1125 {
1126         head->ring = ring;
1127         head->count++;
1128 }
1129
1130 /**
1131  * igb_alloc_q_vector - Allocate memory for a single interrupt vector
1132  * @adapter: board private structure to initialize
1133  * @v_count: q_vectors allocated on adapter, used for ring interleaving
1134  * @v_idx: index of vector in adapter struct
1135  * @txr_count: total number of Tx rings to allocate
1136  * @txr_idx: index of first Tx ring to allocate
1137  * @rxr_count: total number of Rx rings to allocate
1138  * @rxr_idx: index of first Rx ring to allocate
1139  *
1140  * We allocate one q_vector.  If allocation fails we return -ENOMEM.
1141  **/
1142 static int igb_alloc_q_vector(struct igb_adapter *adapter,
1143                               int v_count, int v_idx,
1144                               int txr_count, int txr_idx,
1145                               int rxr_count, int rxr_idx)
1146 {
1147         struct igb_q_vector *q_vector;
1148         struct igb_ring *ring;
1149         int ring_count, size;
1150
1151         /* igb only supports 1 Tx and/or 1 Rx queue per vector */
1152         if (txr_count > 1 || rxr_count > 1)
1153                 return -ENOMEM;
1154
1155         ring_count = txr_count + rxr_count;
1156         size = sizeof(struct igb_q_vector) +
1157                (sizeof(struct igb_ring) * ring_count);
1158
1159         /* allocate q_vector and rings */
1160         q_vector = kzalloc(size, GFP_KERNEL);
1161         if (!q_vector)
1162                 return -ENOMEM;
1163
1164         /* initialize NAPI */
1165         netif_napi_add(adapter->netdev, &q_vector->napi,
1166                        igb_poll, 64);
1167
1168         /* tie q_vector and adapter together */
1169         adapter->q_vector[v_idx] = q_vector;
1170         q_vector->adapter = adapter;
1171
1172         /* initialize work limits */
1173         q_vector->tx.work_limit = adapter->tx_work_limit;
1174
1175         /* initialize ITR configuration */
1176         q_vector->itr_register = adapter->hw.hw_addr + E1000_EITR(0);
1177         q_vector->itr_val = IGB_START_ITR;
1178
1179         /* initialize pointer to rings */
1180         ring = q_vector->ring;
1181
1182         if (txr_count) {
1183                 /* assign generic ring traits */
1184                 ring->dev = &adapter->pdev->dev;
1185                 ring->netdev = adapter->netdev;
1186
1187                 /* configure backlink on ring */
1188                 ring->q_vector = q_vector;
1189
1190                 /* update q_vector Tx values */
1191                 igb_add_ring(ring, &q_vector->tx);
1192
1193                 /* For 82575, context index must be unique per ring. */
1194                 if (adapter->hw.mac.type == e1000_82575)
1195                         set_bit(IGB_RING_FLAG_TX_CTX_IDX, &ring->flags);
1196
1197                 /* apply Tx specific ring traits */
1198                 ring->count = adapter->tx_ring_count;
1199                 ring->queue_index = txr_idx;
1200
1201                 /* assign ring to adapter */
1202                 adapter->tx_ring[txr_idx] = ring;
1203
1204                 /* push pointer to next ring */
1205                 ring++;
1206         }
1207
1208         if (rxr_count) {
1209                 /* assign generic ring traits */
1210                 ring->dev = &adapter->pdev->dev;
1211                 ring->netdev = adapter->netdev;
1212
1213                 /* configure backlink on ring */
1214                 ring->q_vector = q_vector;
1215
1216                 /* update q_vector Rx values */
1217                 igb_add_ring(ring, &q_vector->rx);
1218
1219                 /* set flag indicating ring supports SCTP checksum offload */
1220                 if (adapter->hw.mac.type >= e1000_82576)
1221                         set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags);
1222
1223                 /*
1224                  * On i350, i210, and i211, loopback VLAN packets
1225                  * have the tag byte-swapped.
1226                  * */
1227                 if (adapter->hw.mac.type >= e1000_i350)
1228                         set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags);
1229
1230                 /* apply Rx specific ring traits */
1231                 ring->count = adapter->rx_ring_count;
1232                 ring->queue_index = rxr_idx;
1233
1234                 /* assign ring to adapter */
1235                 adapter->rx_ring[rxr_idx] = ring;
1236         }
1237
1238         return 0;
1239 }
1240
1241
1242 /**
1243  * igb_alloc_q_vectors - Allocate memory for interrupt vectors
1244  * @adapter: board private structure to initialize
1245  *
1246  * We allocate one q_vector per queue interrupt.  If allocation fails we
1247  * return -ENOMEM.
1248  **/
1249 static int igb_alloc_q_vectors(struct igb_adapter *adapter)
1250 {
1251         int q_vectors = adapter->num_q_vectors;
1252         int rxr_remaining = adapter->num_rx_queues;
1253         int txr_remaining = adapter->num_tx_queues;
1254         int rxr_idx = 0, txr_idx = 0, v_idx = 0;
1255         int err;
1256
1257         if (q_vectors >= (rxr_remaining + txr_remaining)) {
1258                 for (; rxr_remaining; v_idx++) {
1259                         err = igb_alloc_q_vector(adapter, q_vectors, v_idx,
1260                                                  0, 0, 1, rxr_idx);
1261
1262                         if (err)
1263                                 goto err_out;
1264
1265                         /* update counts and index */
1266                         rxr_remaining--;
1267                         rxr_idx++;
1268                 }
1269         }
1270
1271         for (; v_idx < q_vectors; v_idx++) {
1272                 int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx);
1273                 int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx);
1274                 err = igb_alloc_q_vector(adapter, q_vectors, v_idx,
1275                                          tqpv, txr_idx, rqpv, rxr_idx);
1276
1277                 if (err)
1278                         goto err_out;
1279
1280                 /* update counts and index */
1281                 rxr_remaining -= rqpv;
1282                 txr_remaining -= tqpv;
1283                 rxr_idx++;
1284                 txr_idx++;
1285         }
1286
1287         return 0;
1288
1289 err_out:
1290         adapter->num_tx_queues = 0;
1291         adapter->num_rx_queues = 0;
1292         adapter->num_q_vectors = 0;
1293
1294         while (v_idx--)
1295                 igb_free_q_vector(adapter, v_idx);
1296
1297         return -ENOMEM;
1298 }
1299
1300 /**
1301  * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
1302  *
1303  * This function initializes the interrupts and allocates all of the queues.
1304  **/
1305 static int igb_init_interrupt_scheme(struct igb_adapter *adapter, bool msix)
1306 {
1307         struct pci_dev *pdev = adapter->pdev;
1308         int err;
1309
1310         igb_set_interrupt_capability(adapter, msix);
1311
1312         err = igb_alloc_q_vectors(adapter);
1313         if (err) {
1314                 dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
1315                 goto err_alloc_q_vectors;
1316         }
1317
1318         igb_cache_ring_register(adapter);
1319
1320         return 0;
1321
1322 err_alloc_q_vectors:
1323         igb_reset_interrupt_capability(adapter);
1324         return err;
1325 }
1326
1327 /**
1328  * igb_request_irq - initialize interrupts
1329  *
1330  * Attempts to configure interrupts using the best available
1331  * capabilities of the hardware and kernel.
1332  **/
1333 static int igb_request_irq(struct igb_adapter *adapter)
1334 {
1335         struct net_device *netdev = adapter->netdev;
1336         struct pci_dev *pdev = adapter->pdev;
1337         int err = 0;
1338
1339         if (adapter->msix_entries) {
1340                 err = igb_request_msix(adapter);
1341                 if (!err)
1342                         goto request_done;
1343                 /* fall back to MSI */
1344                 igb_free_all_tx_resources(adapter);
1345                 igb_free_all_rx_resources(adapter);
1346
1347                 igb_clear_interrupt_scheme(adapter);
1348                 err = igb_init_interrupt_scheme(adapter, false);
1349                 if (err)
1350                         goto request_done;
1351
1352                 igb_setup_all_tx_resources(adapter);
1353                 igb_setup_all_rx_resources(adapter);
1354                 igb_configure(adapter);
1355         }
1356
1357         igb_assign_vector(adapter->q_vector[0], 0);
1358
1359         if (adapter->flags & IGB_FLAG_HAS_MSI) {
1360                 err = request_irq(pdev->irq, igb_intr_msi, 0,
1361                                   netdev->name, adapter);
1362                 if (!err)
1363                         goto request_done;
1364
1365                 /* fall back to legacy interrupts */
1366                 igb_reset_interrupt_capability(adapter);
1367                 adapter->flags &= ~IGB_FLAG_HAS_MSI;
1368         }
1369
1370         err = request_irq(pdev->irq, igb_intr, IRQF_SHARED,
1371                           netdev->name, adapter);
1372
1373         if (err)
1374                 dev_err(&pdev->dev, "Error %d getting interrupt\n",
1375                         err);
1376
1377 request_done:
1378         return err;
1379 }
1380
1381 static void igb_free_irq(struct igb_adapter *adapter)
1382 {
1383         if (adapter->msix_entries) {
1384                 int vector = 0, i;
1385
1386                 free_irq(adapter->msix_entries[vector++].vector, adapter);
1387
1388                 for (i = 0; i < adapter->num_q_vectors; i++)
1389                         free_irq(adapter->msix_entries[vector++].vector,
1390                                  adapter->q_vector[i]);
1391         } else {
1392                 free_irq(adapter->pdev->irq, adapter);
1393         }
1394 }
1395
1396 /**
1397  * igb_irq_disable - Mask off interrupt generation on the NIC
1398  * @adapter: board private structure
1399  **/
1400 static void igb_irq_disable(struct igb_adapter *adapter)
1401 {
1402         struct e1000_hw *hw = &adapter->hw;
1403
1404         /*
1405          * we need to be careful when disabling interrupts.  The VFs are also
1406          * mapped into these registers and so clearing the bits can cause
1407          * issues on the VF drivers so we only need to clear what we set
1408          */
1409         if (adapter->msix_entries) {
1410                 u32 regval = rd32(E1000_EIAM);
1411                 wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
1412                 wr32(E1000_EIMC, adapter->eims_enable_mask);
1413                 regval = rd32(E1000_EIAC);
1414                 wr32(E1000_EIAC, regval & ~adapter->eims_enable_mask);
1415         }
1416
1417         wr32(E1000_IAM, 0);
1418         wr32(E1000_IMC, ~0);
1419         wrfl();
1420         if (adapter->msix_entries) {
1421                 int i;
1422                 for (i = 0; i < adapter->num_q_vectors; i++)
1423                         synchronize_irq(adapter->msix_entries[i].vector);
1424         } else {
1425                 synchronize_irq(adapter->pdev->irq);
1426         }
1427 }
1428
1429 /**
1430  * igb_irq_enable - Enable default interrupt generation settings
1431  * @adapter: board private structure
1432  **/
1433 static void igb_irq_enable(struct igb_adapter *adapter)
1434 {
1435         struct e1000_hw *hw = &adapter->hw;
1436
1437         if (adapter->msix_entries) {
1438                 u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_DRSTA;
1439                 u32 regval = rd32(E1000_EIAC);
1440                 wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
1441                 regval = rd32(E1000_EIAM);
1442                 wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
1443                 wr32(E1000_EIMS, adapter->eims_enable_mask);
1444                 if (adapter->vfs_allocated_count) {
1445                         wr32(E1000_MBVFIMR, 0xFF);
1446                         ims |= E1000_IMS_VMMB;
1447                 }
1448                 wr32(E1000_IMS, ims);
1449         } else {
1450                 wr32(E1000_IMS, IMS_ENABLE_MASK |
1451                                 E1000_IMS_DRSTA);
1452                 wr32(E1000_IAM, IMS_ENABLE_MASK |
1453                                 E1000_IMS_DRSTA);
1454         }
1455 }
1456
1457 static void igb_update_mng_vlan(struct igb_adapter *adapter)
1458 {
1459         struct e1000_hw *hw = &adapter->hw;
1460         u16 vid = adapter->hw.mng_cookie.vlan_id;
1461         u16 old_vid = adapter->mng_vlan_id;
1462
1463         if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
1464                 /* add VID to filter table */
1465                 igb_vfta_set(hw, vid, true);
1466                 adapter->mng_vlan_id = vid;
1467         } else {
1468                 adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
1469         }
1470
1471         if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
1472             (vid != old_vid) &&
1473             !test_bit(old_vid, adapter->active_vlans)) {
1474                 /* remove VID from filter table */
1475                 igb_vfta_set(hw, old_vid, false);
1476         }
1477 }
1478
1479 /**
1480  * igb_release_hw_control - release control of the h/w to f/w
1481  * @adapter: address of board private structure
1482  *
1483  * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
1484  * For ASF and Pass Through versions of f/w this means that the
1485  * driver is no longer loaded.
1486  *
1487  **/
1488 static void igb_release_hw_control(struct igb_adapter *adapter)
1489 {
1490         struct e1000_hw *hw = &adapter->hw;
1491         u32 ctrl_ext;
1492
1493         /* Let firmware take over control of h/w */
1494         ctrl_ext = rd32(E1000_CTRL_EXT);
1495         wr32(E1000_CTRL_EXT,
1496                         ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
1497 }
1498
1499 /**
1500  * igb_get_hw_control - get control of the h/w from f/w
1501  * @adapter: address of board private structure
1502  *
1503  * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
1504  * For ASF and Pass Through versions of f/w this means that
1505  * the driver is loaded.
1506  *
1507  **/
1508 static void igb_get_hw_control(struct igb_adapter *adapter)
1509 {
1510         struct e1000_hw *hw = &adapter->hw;
1511         u32 ctrl_ext;
1512
1513         /* Let firmware know the driver has taken over */
1514         ctrl_ext = rd32(E1000_CTRL_EXT);
1515         wr32(E1000_CTRL_EXT,
1516                         ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
1517 }
1518
1519 /**
1520  * igb_configure - configure the hardware for RX and TX
1521  * @adapter: private board structure
1522  **/
1523 static void igb_configure(struct igb_adapter *adapter)
1524 {
1525         struct net_device *netdev = adapter->netdev;
1526         int i;
1527
1528         igb_get_hw_control(adapter);
1529         igb_set_rx_mode(netdev);
1530
1531         igb_restore_vlan(adapter);
1532
1533         igb_setup_tctl(adapter);
1534         igb_setup_mrqc(adapter);
1535         igb_setup_rctl(adapter);
1536
1537         igb_configure_tx(adapter);
1538         igb_configure_rx(adapter);
1539
1540         igb_rx_fifo_flush_82575(&adapter->hw);
1541
1542         /* call igb_desc_unused which always leaves
1543          * at least 1 descriptor unused to make sure
1544          * next_to_use != next_to_clean */
1545         for (i = 0; i < adapter->num_rx_queues; i++) {
1546                 struct igb_ring *ring = adapter->rx_ring[i];
1547                 igb_alloc_rx_buffers(ring, igb_desc_unused(ring));
1548         }
1549 }
1550
1551 /**
1552  * igb_power_up_link - Power up the phy/serdes link
1553  * @adapter: address of board private structure
1554  **/
1555 void igb_power_up_link(struct igb_adapter *adapter)
1556 {
1557         igb_reset_phy(&adapter->hw);
1558
1559         if (adapter->hw.phy.media_type == e1000_media_type_copper)
1560                 igb_power_up_phy_copper(&adapter->hw);
1561         else
1562                 igb_power_up_serdes_link_82575(&adapter->hw);
1563 }
1564
1565 /**
1566  * igb_power_down_link - Power down the phy/serdes link
1567  * @adapter: address of board private structure
1568  */
1569 static void igb_power_down_link(struct igb_adapter *adapter)
1570 {
1571         if (adapter->hw.phy.media_type == e1000_media_type_copper)
1572                 igb_power_down_phy_copper_82575(&adapter->hw);
1573         else
1574                 igb_shutdown_serdes_link_82575(&adapter->hw);
1575 }
1576
1577 /**
1578  * igb_up - Open the interface and prepare it to handle traffic
1579  * @adapter: board private structure
1580  **/
1581 int igb_up(struct igb_adapter *adapter)
1582 {
1583         struct e1000_hw *hw = &adapter->hw;
1584         int i;
1585
1586         /* hardware has been reset, we need to reload some things */
1587         igb_configure(adapter);
1588
1589         clear_bit(__IGB_DOWN, &adapter->state);
1590
1591         for (i = 0; i < adapter->num_q_vectors; i++)
1592                 napi_enable(&(adapter->q_vector[i]->napi));
1593
1594         if (adapter->msix_entries)
1595                 igb_configure_msix(adapter);
1596         else
1597                 igb_assign_vector(adapter->q_vector[0], 0);
1598
1599         /* Clear any pending interrupts. */
1600         rd32(E1000_ICR);
1601         igb_irq_enable(adapter);
1602
1603         /* notify VFs that reset has been completed */
1604         if (adapter->vfs_allocated_count) {
1605                 u32 reg_data = rd32(E1000_CTRL_EXT);
1606                 reg_data |= E1000_CTRL_EXT_PFRSTD;
1607                 wr32(E1000_CTRL_EXT, reg_data);
1608         }
1609
1610         netif_tx_start_all_queues(adapter->netdev);
1611
1612         /* start the watchdog. */
1613         hw->mac.get_link_status = 1;
1614         schedule_work(&adapter->watchdog_task);
1615
1616         return 0;
1617 }
1618
1619 void igb_down(struct igb_adapter *adapter)
1620 {
1621         struct net_device *netdev = adapter->netdev;
1622         struct e1000_hw *hw = &adapter->hw;
1623         u32 tctl, rctl;
1624         int i;
1625
1626         /* signal that we're down so the interrupt handler does not
1627          * reschedule our watchdog timer */
1628         set_bit(__IGB_DOWN, &adapter->state);
1629
1630         /* disable receives in the hardware */
1631         rctl = rd32(E1000_RCTL);
1632         wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
1633         /* flush and sleep below */
1634
1635         netif_tx_stop_all_queues(netdev);
1636
1637         /* disable transmits in the hardware */
1638         tctl = rd32(E1000_TCTL);
1639         tctl &= ~E1000_TCTL_EN;
1640         wr32(E1000_TCTL, tctl);
1641         /* flush both disables and wait for them to finish */
1642         wrfl();
1643         msleep(10);
1644
1645         for (i = 0; i < adapter->num_q_vectors; i++)
1646                 napi_disable(&(adapter->q_vector[i]->napi));
1647
1648         igb_irq_disable(adapter);
1649
1650         del_timer_sync(&adapter->watchdog_timer);
1651         del_timer_sync(&adapter->phy_info_timer);
1652
1653         netif_carrier_off(netdev);
1654
1655         /* record the stats before reset*/
1656         spin_lock(&adapter->stats64_lock);
1657         igb_update_stats(adapter, &adapter->stats64);
1658         spin_unlock(&adapter->stats64_lock);
1659
1660         adapter->link_speed = 0;
1661         adapter->link_duplex = 0;
1662
1663         if (!pci_channel_offline(adapter->pdev))
1664                 igb_reset(adapter);
1665         igb_clean_all_tx_rings(adapter);
1666         igb_clean_all_rx_rings(adapter);
1667 #ifdef CONFIG_IGB_DCA
1668
1669         /* since we reset the hardware DCA settings were cleared */
1670         igb_setup_dca(adapter);
1671 #endif
1672 }
1673
1674 void igb_reinit_locked(struct igb_adapter *adapter)
1675 {
1676         WARN_ON(in_interrupt());
1677         while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
1678                 msleep(1);
1679         igb_down(adapter);
1680         igb_up(adapter);
1681         clear_bit(__IGB_RESETTING, &adapter->state);
1682 }
1683
1684 void igb_reset(struct igb_adapter *adapter)
1685 {
1686         struct pci_dev *pdev = adapter->pdev;
1687         struct e1000_hw *hw = &adapter->hw;
1688         struct e1000_mac_info *mac = &hw->mac;
1689         struct e1000_fc_info *fc = &hw->fc;
1690         u32 pba = 0, tx_space, min_tx_space, min_rx_space, hwm;
1691
1692         /* Repartition Pba for greater than 9k mtu
1693          * To take effect CTRL.RST is required.
1694          */
1695         switch (mac->type) {
1696         case e1000_i350:
1697         case e1000_82580:
1698                 pba = rd32(E1000_RXPBS);
1699                 pba = igb_rxpbs_adjust_82580(pba);
1700                 break;
1701         case e1000_82576:
1702                 pba = rd32(E1000_RXPBS);
1703                 pba &= E1000_RXPBS_SIZE_MASK_82576;
1704                 break;
1705         case e1000_82575:
1706         case e1000_i210:
1707         case e1000_i211:
1708         default:
1709                 pba = E1000_PBA_34K;
1710                 break;
1711         }
1712
1713         if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) &&
1714             (mac->type < e1000_82576)) {
1715                 /* adjust PBA for jumbo frames */
1716                 wr32(E1000_PBA, pba);
1717
1718                 /* To maintain wire speed transmits, the Tx FIFO should be
1719                  * large enough to accommodate two full transmit packets,
1720                  * rounded up to the next 1KB and expressed in KB.  Likewise,
1721                  * the Rx FIFO should be large enough to accommodate at least
1722                  * one full receive packet and is similarly rounded up and
1723                  * expressed in KB. */
1724                 pba = rd32(E1000_PBA);
1725                 /* upper 16 bits has Tx packet buffer allocation size in KB */
1726                 tx_space = pba >> 16;
1727                 /* lower 16 bits has Rx packet buffer allocation size in KB */
1728                 pba &= 0xffff;
1729                 /* the tx fifo also stores 16 bytes of information about the tx
1730                  * but don't include ethernet FCS because hardware appends it */
1731                 min_tx_space = (adapter->max_frame_size +
1732                                 sizeof(union e1000_adv_tx_desc) -
1733                                 ETH_FCS_LEN) * 2;
1734                 min_tx_space = ALIGN(min_tx_space, 1024);
1735                 min_tx_space >>= 10;
1736                 /* software strips receive CRC, so leave room for it */
1737                 min_rx_space = adapter->max_frame_size;
1738                 min_rx_space = ALIGN(min_rx_space, 1024);
1739                 min_rx_space >>= 10;
1740
1741                 /* If current Tx allocation is less than the min Tx FIFO size,
1742                  * and the min Tx FIFO size is less than the current Rx FIFO
1743                  * allocation, take space away from current Rx allocation */
1744                 if (tx_space < min_tx_space &&
1745                     ((min_tx_space - tx_space) < pba)) {
1746                         pba = pba - (min_tx_space - tx_space);
1747
1748                         /* if short on rx space, rx wins and must trump tx
1749                          * adjustment */
1750                         if (pba < min_rx_space)
1751                                 pba = min_rx_space;
1752                 }
1753                 wr32(E1000_PBA, pba);
1754         }
1755
1756         /* flow control settings */
1757         /* The high water mark must be low enough to fit one full frame
1758          * (or the size used for early receive) above it in the Rx FIFO.
1759          * Set it to the lower of:
1760          * - 90% of the Rx FIFO size, or
1761          * - the full Rx FIFO size minus one full frame */
1762         hwm = min(((pba << 10) * 9 / 10),
1763                         ((pba << 10) - 2 * adapter->max_frame_size));
1764
1765         fc->high_water = hwm & 0xFFFFFFF0;      /* 16-byte granularity */
1766         fc->low_water = fc->high_water - 16;
1767         fc->pause_time = 0xFFFF;
1768         fc->send_xon = 1;
1769         fc->current_mode = fc->requested_mode;
1770
1771         /* disable receive for all VFs and wait one second */
1772         if (adapter->vfs_allocated_count) {
1773                 int i;
1774                 for (i = 0 ; i < adapter->vfs_allocated_count; i++)
1775                         adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC;
1776
1777                 /* ping all the active vfs to let them know we are going down */
1778                 igb_ping_all_vfs(adapter);
1779
1780                 /* disable transmits and receives */
1781                 wr32(E1000_VFRE, 0);
1782                 wr32(E1000_VFTE, 0);
1783         }
1784
1785         /* Allow time for pending master requests to run */
1786         hw->mac.ops.reset_hw(hw);
1787         wr32(E1000_WUC, 0);
1788
1789         if (hw->mac.ops.init_hw(hw))
1790                 dev_err(&pdev->dev, "Hardware Error\n");
1791
1792         /*
1793          * Flow control settings reset on hardware reset, so guarantee flow
1794          * control is off when forcing speed.
1795          */
1796         if (!hw->mac.autoneg)
1797                 igb_force_mac_fc(hw);
1798
1799         igb_init_dmac(adapter, pba);
1800 #ifdef CONFIG_IGB_HWMON
1801         /* Re-initialize the thermal sensor on i350 devices. */
1802         if (!test_bit(__IGB_DOWN, &adapter->state)) {
1803                 if (mac->type == e1000_i350 && hw->bus.func == 0) {
1804                         /* If present, re-initialize the external thermal sensor
1805                          * interface.
1806                          */
1807                         if (adapter->ets)
1808                                 mac->ops.init_thermal_sensor_thresh(hw);
1809                 }
1810         }
1811 #endif
1812         if (!netif_running(adapter->netdev))
1813                 igb_power_down_link(adapter);
1814
1815         igb_update_mng_vlan(adapter);
1816
1817         /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
1818         wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
1819
1820         /* Re-enable PTP, where applicable. */
1821         igb_ptp_reset(adapter);
1822
1823         igb_get_phy_info(hw);
1824 }
1825
1826 static netdev_features_t igb_fix_features(struct net_device *netdev,
1827         netdev_features_t features)
1828 {
1829         /*
1830          * Since there is no support for separate rx/tx vlan accel
1831          * enable/disable make sure tx flag is always in same state as rx.
1832          */
1833         if (features & NETIF_F_HW_VLAN_RX)
1834                 features |= NETIF_F_HW_VLAN_TX;
1835         else
1836                 features &= ~NETIF_F_HW_VLAN_TX;
1837
1838         return features;
1839 }
1840
1841 static int igb_set_features(struct net_device *netdev,
1842         netdev_features_t features)
1843 {
1844         netdev_features_t changed = netdev->features ^ features;
1845         struct igb_adapter *adapter = netdev_priv(netdev);
1846
1847         if (changed & NETIF_F_HW_VLAN_RX)
1848                 igb_vlan_mode(netdev, features);
1849
1850         if (!(changed & NETIF_F_RXALL))
1851                 return 0;
1852
1853         netdev->features = features;
1854
1855         if (netif_running(netdev))
1856                 igb_reinit_locked(adapter);
1857         else
1858                 igb_reset(adapter);
1859
1860         return 0;
1861 }
1862
1863 static const struct net_device_ops igb_netdev_ops = {
1864         .ndo_open               = igb_open,
1865         .ndo_stop               = igb_close,
1866         .ndo_start_xmit         = igb_xmit_frame,
1867         .ndo_get_stats64        = igb_get_stats64,
1868         .ndo_set_rx_mode        = igb_set_rx_mode,
1869         .ndo_set_mac_address    = igb_set_mac,
1870         .ndo_change_mtu         = igb_change_mtu,
1871         .ndo_do_ioctl           = igb_ioctl,
1872         .ndo_tx_timeout         = igb_tx_timeout,
1873         .ndo_validate_addr      = eth_validate_addr,
1874         .ndo_vlan_rx_add_vid    = igb_vlan_rx_add_vid,
1875         .ndo_vlan_rx_kill_vid   = igb_vlan_rx_kill_vid,
1876         .ndo_set_vf_mac         = igb_ndo_set_vf_mac,
1877         .ndo_set_vf_vlan        = igb_ndo_set_vf_vlan,
1878         .ndo_set_vf_tx_rate     = igb_ndo_set_vf_bw,
1879         .ndo_get_vf_config      = igb_ndo_get_vf_config,
1880 #ifdef CONFIG_NET_POLL_CONTROLLER
1881         .ndo_poll_controller    = igb_netpoll,
1882 #endif
1883         .ndo_fix_features       = igb_fix_features,
1884         .ndo_set_features       = igb_set_features,
1885 };
1886
1887 /**
1888  * igb_set_fw_version - Configure version string for ethtool
1889  * @adapter: adapter struct
1890  *
1891  **/
1892 void igb_set_fw_version(struct igb_adapter *adapter)
1893 {
1894         struct e1000_hw *hw = &adapter->hw;
1895         struct e1000_fw_version fw;
1896
1897         igb_get_fw_version(hw, &fw);
1898
1899         switch (hw->mac.type) {
1900         case e1000_i211:
1901                 snprintf(adapter->fw_version, sizeof(adapter->fw_version),
1902                          "%2d.%2d-%d",
1903                          fw.invm_major, fw.invm_minor, fw.invm_img_type);
1904                 break;
1905
1906         default:
1907                 /* if option is rom valid, display its version too */
1908                 if (fw.or_valid) {
1909                         snprintf(adapter->fw_version,
1910                                  sizeof(adapter->fw_version),
1911                                  "%d.%d, 0x%08x, %d.%d.%d",
1912                                  fw.eep_major, fw.eep_minor, fw.etrack_id,
1913                                  fw.or_major, fw.or_build, fw.or_patch);
1914                 /* no option rom */
1915                 } else {
1916                         snprintf(adapter->fw_version,
1917                                  sizeof(adapter->fw_version),
1918                                  "%d.%d, 0x%08x",
1919                                  fw.eep_major, fw.eep_minor, fw.etrack_id);
1920                 }
1921                 break;
1922         }
1923         return;
1924 }
1925
1926 /*  igb_init_i2c - Init I2C interface
1927  *  @adapter: pointer to adapter structure
1928  *
1929  */
1930 static s32 igb_init_i2c(struct igb_adapter *adapter)
1931 {
1932         s32 status = E1000_SUCCESS;
1933
1934         /* I2C interface supported on i350 devices */
1935         if (adapter->hw.mac.type != e1000_i350)
1936                 return E1000_SUCCESS;
1937
1938         /* Initialize the i2c bus which is controlled by the registers.
1939          * This bus will use the i2c_algo_bit structue that implements
1940          * the protocol through toggling of the 4 bits in the register.
1941          */
1942         adapter->i2c_adap.owner = THIS_MODULE;
1943         adapter->i2c_algo = igb_i2c_algo;
1944         adapter->i2c_algo.data = adapter;
1945         adapter->i2c_adap.algo_data = &adapter->i2c_algo;
1946         adapter->i2c_adap.dev.parent = &adapter->pdev->dev;
1947         strlcpy(adapter->i2c_adap.name, "igb BB",
1948                 sizeof(adapter->i2c_adap.name));
1949         status = i2c_bit_add_bus(&adapter->i2c_adap);
1950         return status;
1951 }
1952
1953 /**
1954  * igb_probe - Device Initialization Routine
1955  * @pdev: PCI device information struct
1956  * @ent: entry in igb_pci_tbl
1957  *
1958  * Returns 0 on success, negative on failure
1959  *
1960  * igb_probe initializes an adapter identified by a pci_dev structure.
1961  * The OS initialization, configuring of the adapter private structure,
1962  * and a hardware reset occur.
1963  **/
1964 static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
1965 {
1966         struct net_device *netdev;
1967         struct igb_adapter *adapter;
1968         struct e1000_hw *hw;
1969         u16 eeprom_data = 0;
1970         s32 ret_val;
1971         static int global_quad_port_a; /* global quad port a indication */
1972         const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
1973         unsigned long mmio_start, mmio_len;
1974         int err, pci_using_dac;
1975         u8 part_str[E1000_PBANUM_LENGTH];
1976
1977         /* Catch broken hardware that put the wrong VF device ID in
1978          * the PCIe SR-IOV capability.
1979          */
1980         if (pdev->is_virtfn) {
1981                 WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
1982                         pci_name(pdev), pdev->vendor, pdev->device);
1983                 return -EINVAL;
1984         }
1985
1986         err = pci_enable_device_mem(pdev);
1987         if (err)
1988                 return err;
1989
1990         pci_using_dac = 0;
1991         err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
1992         if (!err) {
1993                 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
1994                 if (!err)
1995                         pci_using_dac = 1;
1996         } else {
1997                 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
1998                 if (err) {
1999                         err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
2000                         if (err) {
2001                                 dev_err(&pdev->dev, "No usable DMA "
2002                                         "configuration, aborting\n");
2003                                 goto err_dma;
2004                         }
2005                 }
2006         }
2007
2008         err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
2009                                            IORESOURCE_MEM),
2010                                            igb_driver_name);
2011         if (err)
2012                 goto err_pci_reg;
2013
2014         pci_enable_pcie_error_reporting(pdev);
2015
2016         pci_set_master(pdev);
2017         pci_save_state(pdev);
2018
2019         err = -ENOMEM;
2020         netdev = alloc_etherdev_mq(sizeof(struct igb_adapter),
2021                                    IGB_MAX_TX_QUEUES);
2022         if (!netdev)
2023                 goto err_alloc_etherdev;
2024
2025         SET_NETDEV_DEV(netdev, &pdev->dev);
2026
2027         pci_set_drvdata(pdev, netdev);
2028         adapter = netdev_priv(netdev);
2029         adapter->netdev = netdev;
2030         adapter->pdev = pdev;
2031         hw = &adapter->hw;
2032         hw->back = adapter;
2033         adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
2034
2035         mmio_start = pci_resource_start(pdev, 0);
2036         mmio_len = pci_resource_len(pdev, 0);
2037
2038         err = -EIO;
2039         hw->hw_addr = ioremap(mmio_start, mmio_len);
2040         if (!hw->hw_addr)
2041                 goto err_ioremap;
2042
2043         netdev->netdev_ops = &igb_netdev_ops;
2044         igb_set_ethtool_ops(netdev);
2045         netdev->watchdog_timeo = 5 * HZ;
2046
2047         strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
2048
2049         netdev->mem_start = mmio_start;
2050         netdev->mem_end = mmio_start + mmio_len;
2051
2052         /* PCI config space info */
2053         hw->vendor_id = pdev->vendor;
2054         hw->device_id = pdev->device;
2055         hw->revision_id = pdev->revision;
2056         hw->subsystem_vendor_id = pdev->subsystem_vendor;
2057         hw->subsystem_device_id = pdev->subsystem_device;
2058
2059         /* Copy the default MAC, PHY and NVM function pointers */
2060         memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
2061         memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
2062         memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
2063         /* Initialize skew-specific constants */
2064         err = ei->get_invariants(hw);
2065         if (err)
2066                 goto err_sw_init;
2067
2068         /* setup the private structure */
2069         err = igb_sw_init(adapter);
2070         if (err)
2071                 goto err_sw_init;
2072
2073         igb_get_bus_info_pcie(hw);
2074
2075         hw->phy.autoneg_wait_to_complete = false;
2076
2077         /* Copper options */
2078         if (hw->phy.media_type == e1000_media_type_copper) {
2079                 hw->phy.mdix = AUTO_ALL_MODES;
2080                 hw->phy.disable_polarity_correction = false;
2081                 hw->phy.ms_type = e1000_ms_hw_default;
2082         }
2083
2084         if (igb_check_reset_block(hw))
2085                 dev_info(&pdev->dev,
2086                         "PHY reset is blocked due to SOL/IDER session.\n");
2087
2088         /*
2089          * features is initialized to 0 in allocation, it might have bits
2090          * set by igb_sw_init so we should use an or instead of an
2091          * assignment.
2092          */
2093         netdev->features |= NETIF_F_SG |
2094                             NETIF_F_IP_CSUM |
2095                             NETIF_F_IPV6_CSUM |
2096                             NETIF_F_TSO |
2097                             NETIF_F_TSO6 |
2098                             NETIF_F_RXHASH |
2099                             NETIF_F_RXCSUM |
2100                             NETIF_F_HW_VLAN_RX |
2101                             NETIF_F_HW_VLAN_TX;
2102
2103         /* copy netdev features into list of user selectable features */
2104         netdev->hw_features |= netdev->features;
2105         netdev->hw_features |= NETIF_F_RXALL;
2106
2107         /* set this bit last since it cannot be part of hw_features */
2108         netdev->features |= NETIF_F_HW_VLAN_FILTER;
2109
2110         netdev->vlan_features |= NETIF_F_TSO |
2111                                  NETIF_F_TSO6 |
2112                                  NETIF_F_IP_CSUM |
2113                                  NETIF_F_IPV6_CSUM |
2114                                  NETIF_F_SG;
2115
2116         netdev->priv_flags |= IFF_SUPP_NOFCS;
2117
2118         if (pci_using_dac) {
2119                 netdev->features |= NETIF_F_HIGHDMA;
2120                 netdev->vlan_features |= NETIF_F_HIGHDMA;
2121         }
2122
2123         if (hw->mac.type >= e1000_82576) {
2124                 netdev->hw_features |= NETIF_F_SCTP_CSUM;
2125                 netdev->features |= NETIF_F_SCTP_CSUM;
2126         }
2127
2128         netdev->priv_flags |= IFF_UNICAST_FLT;
2129
2130         adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
2131
2132         /* before reading the NVM, reset the controller to put the device in a
2133          * known good starting state */
2134         hw->mac.ops.reset_hw(hw);
2135
2136         /*
2137          * make sure the NVM is good , i211 parts have special NVM that
2138          * doesn't contain a checksum
2139          */
2140         if (hw->mac.type != e1000_i211) {
2141                 if (hw->nvm.ops.validate(hw) < 0) {
2142                         dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
2143                         err = -EIO;
2144                         goto err_eeprom;
2145                 }
2146         }
2147
2148         /* copy the MAC address out of the NVM */
2149         if (hw->mac.ops.read_mac_addr(hw))
2150                 dev_err(&pdev->dev, "NVM Read Error\n");
2151
2152         memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
2153
2154         if (!is_valid_ether_addr(netdev->dev_addr)) {
2155                 dev_err(&pdev->dev, "Invalid MAC Address\n");
2156                 err = -EIO;
2157                 goto err_eeprom;
2158         }
2159
2160         /* get firmware version for ethtool -i */
2161         igb_set_fw_version(adapter);
2162
2163         setup_timer(&adapter->watchdog_timer, igb_watchdog,
2164                     (unsigned long) adapter);
2165         setup_timer(&adapter->phy_info_timer, igb_update_phy_info,
2166                     (unsigned long) adapter);
2167
2168         INIT_WORK(&adapter->reset_task, igb_reset_task);
2169         INIT_WORK(&adapter->watchdog_task, igb_watchdog_task);
2170
2171         /* Initialize link properties that are user-changeable */
2172         adapter->fc_autoneg = true;
2173         hw->mac.autoneg = true;
2174         hw->phy.autoneg_advertised = 0x2f;
2175
2176         hw->fc.requested_mode = e1000_fc_default;
2177         hw->fc.current_mode = e1000_fc_default;
2178
2179         igb_validate_mdi_setting(hw);
2180
2181         /* By default, support wake on port A */
2182         if (hw->bus.func == 0)
2183                 adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
2184
2185         /* Check the NVM for wake support on non-port A ports */
2186         if (hw->mac.type >= e1000_82580)
2187                 hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
2188                                  NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
2189                                  &eeprom_data);
2190         else if (hw->bus.func == 1)
2191                 hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
2192
2193         if (eeprom_data & IGB_EEPROM_APME)
2194                 adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
2195
2196         /* now that we have the eeprom settings, apply the special cases where
2197          * the eeprom may be wrong or the board simply won't support wake on
2198          * lan on a particular port */
2199         switch (pdev->device) {
2200         case E1000_DEV_ID_82575GB_QUAD_COPPER:
2201                 adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
2202                 break;
2203         case E1000_DEV_ID_82575EB_FIBER_SERDES:
2204         case E1000_DEV_ID_82576_FIBER:
2205         case E1000_DEV_ID_82576_SERDES:
2206                 /* Wake events only supported on port A for dual fiber
2207                  * regardless of eeprom setting */
2208                 if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
2209                         adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
2210                 break;
2211         case E1000_DEV_ID_82576_QUAD_COPPER:
2212         case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
2213                 /* if quad port adapter, disable WoL on all but port A */
2214                 if (global_quad_port_a != 0)
2215                         adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
2216                 else
2217                         adapter->flags |= IGB_FLAG_QUAD_PORT_A;
2218                 /* Reset for multiple quad port adapters */
2219                 if (++global_quad_port_a == 4)
2220                         global_quad_port_a = 0;
2221                 break;
2222         default:
2223                 /* If the device can't wake, don't set software support */
2224                 if (!device_can_wakeup(&adapter->pdev->dev))
2225                         adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
2226         }
2227
2228         /* initialize the wol settings based on the eeprom settings */
2229         if (adapter->flags & IGB_FLAG_WOL_SUPPORTED)
2230                 adapter->wol |= E1000_WUFC_MAG;
2231
2232         /* Some vendors want WoL disabled by default, but still supported */
2233         if ((hw->mac.type == e1000_i350) &&
2234             (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
2235                 adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
2236                 adapter->wol = 0;
2237         }
2238
2239         device_set_wakeup_enable(&adapter->pdev->dev,
2240                                  adapter->flags & IGB_FLAG_WOL_SUPPORTED);
2241
2242         /* reset the hardware with the new settings */
2243         igb_reset(adapter);
2244
2245         /* Init the I2C interface */
2246         err = igb_init_i2c(adapter);
2247         if (err) {
2248                 dev_err(&pdev->dev, "failed to init i2c interface\n");
2249                 goto err_eeprom;
2250         }
2251
2252         /* let the f/w know that the h/w is now under the control of the
2253          * driver. */
2254         igb_get_hw_control(adapter);
2255
2256         strcpy(netdev->name, "eth%d");
2257         err = register_netdev(netdev);
2258         if (err)
2259                 goto err_register;
2260
2261         /* carrier off reporting is important to ethtool even BEFORE open */
2262         netif_carrier_off(netdev);
2263
2264 #ifdef CONFIG_IGB_DCA
2265         if (dca_add_requester(&pdev->dev) == 0) {
2266                 adapter->flags |= IGB_FLAG_DCA_ENABLED;
2267                 dev_info(&pdev->dev, "DCA enabled\n");
2268                 igb_setup_dca(adapter);
2269         }
2270
2271 #endif
2272 #ifdef CONFIG_IGB_HWMON
2273         /* Initialize the thermal sensor on i350 devices. */
2274         if (hw->mac.type == e1000_i350 && hw->bus.func == 0) {
2275                 u16 ets_word;
2276
2277                 /*
2278                  * Read the NVM to determine if this i350 device supports an
2279                  * external thermal sensor.
2280                  */
2281                 hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word);
2282                 if (ets_word != 0x0000 && ets_word != 0xFFFF)
2283                         adapter->ets = true;
2284                 else
2285                         adapter->ets = false;
2286                 if (igb_sysfs_init(adapter))
2287                         dev_err(&pdev->dev,
2288                                 "failed to allocate sysfs resources\n");
2289         } else {
2290                 adapter->ets = false;
2291         }
2292 #endif
2293         /* do hw tstamp init after resetting */
2294         igb_ptp_init(adapter);
2295
2296         dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
2297         /* print bus type/speed/width info */
2298         dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
2299                  netdev->name,
2300                  ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
2301                   (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" :
2302                                                             "unknown"),
2303                  ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
2304                   (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" :
2305                   (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" :
2306                    "unknown"),
2307                  netdev->dev_addr);
2308
2309         ret_val = igb_read_part_string(hw, part_str, E1000_PBANUM_LENGTH);
2310         if (ret_val)
2311                 strcpy(part_str, "Unknown");
2312         dev_info(&pdev->dev, "%s: PBA No: %s\n", netdev->name, part_str);
2313         dev_info(&pdev->dev,
2314                 "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
2315                 adapter->msix_entries ? "MSI-X" :
2316                 (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
2317                 adapter->num_rx_queues, adapter->num_tx_queues);
2318         switch (hw->mac.type) {
2319         case e1000_i350:
2320         case e1000_i210:
2321         case e1000_i211:
2322                 igb_set_eee_i350(hw);
2323                 break;
2324         default:
2325                 break;
2326         }
2327
2328         pm_runtime_put_noidle(&pdev->dev);
2329         return 0;
2330
2331 err_register:
2332         igb_release_hw_control(adapter);
2333         memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap));
2334 err_eeprom:
2335         if (!igb_check_reset_block(hw))
2336                 igb_reset_phy(hw);
2337
2338         if (hw->flash_address)
2339                 iounmap(hw->flash_address);
2340 err_sw_init:
2341         igb_clear_interrupt_scheme(adapter);
2342         iounmap(hw->hw_addr);
2343 err_ioremap:
2344         free_netdev(netdev);
2345 err_alloc_etherdev:
2346         pci_release_selected_regions(pdev,
2347                                      pci_select_bars(pdev, IORESOURCE_MEM));
2348 err_pci_reg:
2349 err_dma:
2350         pci_disable_device(pdev);
2351         return err;
2352 }
2353
2354 #ifdef CONFIG_PCI_IOV
2355 static int  igb_disable_sriov(struct pci_dev *pdev)
2356 {
2357         struct net_device *netdev = pci_get_drvdata(pdev);
2358         struct igb_adapter *adapter = netdev_priv(netdev);
2359         struct e1000_hw *hw = &adapter->hw;
2360
2361         /* reclaim resources allocated to VFs */
2362         if (adapter->vf_data) {
2363                 /* disable iov and allow time for transactions to clear */
2364                 if (igb_vfs_are_assigned(adapter)) {
2365                         dev_warn(&pdev->dev,
2366                                  "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n");
2367                         return -EPERM;
2368                 } else {
2369                         pci_disable_sriov(pdev);
2370                         msleep(500);
2371                 }
2372
2373                 kfree(adapter->vf_data);
2374                 adapter->vf_data = NULL;
2375                 adapter->vfs_allocated_count = 0;
2376                 wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
2377                 wrfl();
2378                 msleep(100);
2379                 dev_info(&pdev->dev, "IOV Disabled\n");
2380
2381                 /* Re-enable DMA Coalescing flag since IOV is turned off */
2382                 adapter->flags |= IGB_FLAG_DMAC;
2383         }
2384
2385         return 0;
2386 }
2387
2388 static int igb_enable_sriov(struct pci_dev *pdev, int num_vfs)
2389 {
2390         struct net_device *netdev = pci_get_drvdata(pdev);
2391         struct igb_adapter *adapter = netdev_priv(netdev);
2392         int old_vfs = pci_num_vf(pdev);
2393         int err = 0;
2394         int i;
2395
2396         if (!num_vfs)
2397                 goto out;
2398         else if (old_vfs && old_vfs == num_vfs)
2399                 goto out;
2400         else if (old_vfs && old_vfs != num_vfs)
2401                 err = igb_disable_sriov(pdev);
2402
2403         if (err)
2404                 goto out;
2405
2406         if (num_vfs > 7) {
2407                 err = -EPERM;
2408                 goto out;
2409         }
2410
2411         adapter->vfs_allocated_count = num_vfs;
2412
2413         adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
2414                                 sizeof(struct vf_data_storage), GFP_KERNEL);
2415
2416         /* if allocation failed then we do not support SR-IOV */
2417         if (!adapter->vf_data) {
2418                 adapter->vfs_allocated_count = 0;
2419                 dev_err(&pdev->dev,
2420                         "Unable to allocate memory for VF Data Storage\n");
2421                 err = -ENOMEM;
2422                 goto out;
2423         }
2424
2425         err = pci_enable_sriov(pdev, adapter->vfs_allocated_count);
2426         if (err)
2427                 goto err_out;
2428
2429         dev_info(&pdev->dev, "%d VFs allocated\n",
2430                  adapter->vfs_allocated_count);
2431         for (i = 0; i < adapter->vfs_allocated_count; i++)
2432                 igb_vf_configure(adapter, i);
2433
2434         /* DMA Coalescing is not supported in IOV mode. */
2435         adapter->flags &= ~IGB_FLAG_DMAC;
2436         goto out;
2437
2438 err_out:
2439         kfree(adapter->vf_data);
2440         adapter->vf_data = NULL;
2441         adapter->vfs_allocated_count = 0;
2442 out:
2443         return err;
2444 }
2445
2446 #endif
2447 /*
2448  *  igb_remove_i2c - Cleanup  I2C interface
2449  *  @adapter: pointer to adapter structure
2450  *
2451  */
2452 static void igb_remove_i2c(struct igb_adapter *adapter)
2453 {
2454
2455         /* free the adapter bus structure */
2456         i2c_del_adapter(&adapter->i2c_adap);
2457 }
2458
2459 /**
2460  * igb_remove - Device Removal Routine
2461  * @pdev: PCI device information struct
2462  *
2463  * igb_remove is called by the PCI subsystem to alert the driver
2464  * that it should release a PCI device.  The could be caused by a
2465  * Hot-Plug event, or because the driver is going to be removed from
2466  * memory.
2467  **/
2468 static void igb_remove(struct pci_dev *pdev)
2469 {
2470         struct net_device *netdev = pci_get_drvdata(pdev);
2471         struct igb_adapter *adapter = netdev_priv(netdev);
2472         struct e1000_hw *hw = &adapter->hw;
2473
2474         pm_runtime_get_noresume(&pdev->dev);
2475 #ifdef CONFIG_IGB_HWMON
2476         igb_sysfs_exit(adapter);
2477 #endif
2478         igb_remove_i2c(adapter);
2479         igb_ptp_stop(adapter);
2480         /*
2481          * The watchdog timer may be rescheduled, so explicitly
2482          * disable watchdog from being rescheduled.
2483          */
2484         set_bit(__IGB_DOWN, &adapter->state);
2485         del_timer_sync(&adapter->watchdog_timer);
2486         del_timer_sync(&adapter->phy_info_timer);
2487
2488         cancel_work_sync(&adapter->reset_task);
2489         cancel_work_sync(&adapter->watchdog_task);
2490
2491 #ifdef CONFIG_IGB_DCA
2492         if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
2493                 dev_info(&pdev->dev, "DCA disabled\n");
2494                 dca_remove_requester(&pdev->dev);
2495                 adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
2496                 wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
2497         }
2498 #endif
2499
2500         /* Release control of h/w to f/w.  If f/w is AMT enabled, this
2501          * would have already happened in close and is redundant. */
2502         igb_release_hw_control(adapter);
2503
2504         unregister_netdev(netdev);
2505
2506         igb_clear_interrupt_scheme(adapter);
2507
2508 #ifdef CONFIG_PCI_IOV
2509         igb_disable_sriov(pdev);
2510 #endif
2511
2512         iounmap(hw->hw_addr);
2513         if (hw->flash_address)
2514                 iounmap(hw->flash_address);
2515         pci_release_selected_regions(pdev,
2516                                      pci_select_bars(pdev, IORESOURCE_MEM));
2517
2518         kfree(adapter->shadow_vfta);
2519         free_netdev(netdev);
2520
2521         pci_disable_pcie_error_reporting(pdev);
2522
2523         pci_disable_device(pdev);
2524 }
2525
2526 /**
2527  * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
2528  * @adapter: board private structure to initialize
2529  *
2530  * This function initializes the vf specific data storage and then attempts to
2531  * allocate the VFs.  The reason for ordering it this way is because it is much
2532  * mor expensive time wise to disable SR-IOV than it is to allocate and free
2533  * the memory for the VFs.
2534  **/
2535 static void igb_probe_vfs(struct igb_adapter *adapter)
2536 {
2537 #ifdef CONFIG_PCI_IOV
2538         struct pci_dev *pdev = adapter->pdev;
2539         struct e1000_hw *hw = &adapter->hw;
2540
2541         /* Virtualization features not supported on i210 family. */
2542         if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
2543                 return;
2544
2545         igb_enable_sriov(pdev, max_vfs);
2546         pci_sriov_set_totalvfs(pdev, 7);
2547
2548 #endif /* CONFIG_PCI_IOV */
2549 }
2550
2551 static void igb_init_queue_configuration(struct igb_adapter *adapter)
2552 {
2553         struct e1000_hw *hw = &adapter->hw;
2554         u32 max_rss_queues;
2555
2556         /* Determine the maximum number of RSS queues supported. */
2557         switch (hw->mac.type) {
2558         case e1000_i211:
2559                 max_rss_queues = IGB_MAX_RX_QUEUES_I211;
2560                 break;
2561         case e1000_82575:
2562         case e1000_i210:
2563                 max_rss_queues = IGB_MAX_RX_QUEUES_82575;
2564                 break;
2565         case e1000_i350:
2566                 /* I350 cannot do RSS and SR-IOV at the same time */
2567                 if (!!adapter->vfs_allocated_count) {
2568                         max_rss_queues = 1;
2569                         break;
2570                 }
2571                 /* fall through */
2572         case e1000_82576:
2573                 if (!!adapter->vfs_allocated_count) {
2574                         max_rss_queues = 2;
2575                         break;
2576                 }
2577                 /* fall through */
2578         case e1000_82580:
2579         default:
2580                 max_rss_queues = IGB_MAX_RX_QUEUES;
2581                 break;
2582         }
2583
2584         adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus());
2585
2586         /* Determine if we need to pair queues. */
2587         switch (hw->mac.type) {
2588         case e1000_82575:
2589         case e1000_i211:
2590                 /* Device supports enough interrupts without queue pairing. */
2591                 break;
2592         case e1000_82576:
2593                 /*
2594                  * If VFs are going to be allocated with RSS queues then we
2595                  * should pair the queues in order to conserve interrupts due
2596                  * to limited supply.
2597                  */
2598                 if ((adapter->rss_queues > 1) &&
2599                     (adapter->vfs_allocated_count > 6))
2600                         adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
2601                 /* fall through */
2602         case e1000_82580:
2603         case e1000_i350:
2604         case e1000_i210:
2605         default:
2606                 /*
2607                  * If rss_queues > half of max_rss_queues, pair the queues in
2608                  * order to conserve interrupts due to limited supply.
2609                  */
2610                 if (adapter->rss_queues > (max_rss_queues / 2))
2611                         adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
2612                 break;
2613         }
2614 }
2615
2616 /**
2617  * igb_sw_init - Initialize general software structures (struct igb_adapter)
2618  * @adapter: board private structure to initialize
2619  *
2620  * igb_sw_init initializes the Adapter private data structure.
2621  * Fields are initialized based on PCI device information and
2622  * OS network device settings (MTU size).
2623  **/
2624 static int igb_sw_init(struct igb_adapter *adapter)
2625 {
2626         struct e1000_hw *hw = &adapter->hw;
2627         struct net_device *netdev = adapter->netdev;
2628         struct pci_dev *pdev = adapter->pdev;
2629
2630         pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
2631
2632         /* set default ring sizes */
2633         adapter->tx_ring_count = IGB_DEFAULT_TXD;
2634         adapter->rx_ring_count = IGB_DEFAULT_RXD;
2635
2636         /* set default ITR values */
2637         adapter->rx_itr_setting = IGB_DEFAULT_ITR;
2638         adapter->tx_itr_setting = IGB_DEFAULT_ITR;
2639
2640         /* set default work limits */
2641         adapter->tx_work_limit = IGB_DEFAULT_TX_WORK;
2642
2643         adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
2644                                   VLAN_HLEN;
2645         adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
2646
2647         spin_lock_init(&adapter->stats64_lock);
2648 #ifdef CONFIG_PCI_IOV
2649         switch (hw->mac.type) {
2650         case e1000_82576:
2651         case e1000_i350:
2652                 if (max_vfs > 7) {
2653                         dev_warn(&pdev->dev,
2654                                  "Maximum of 7 VFs per PF, using max\n");
2655                         max_vfs = adapter->vfs_allocated_count = 7;
2656                 } else
2657                         adapter->vfs_allocated_count = max_vfs;
2658                 if (adapter->vfs_allocated_count)
2659                         dev_warn(&pdev->dev,
2660                                  "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n");
2661                 break;
2662         default:
2663                 break;
2664         }
2665 #endif /* CONFIG_PCI_IOV */
2666
2667         igb_init_queue_configuration(adapter);
2668
2669         /* Setup and initialize a copy of the hw vlan table array */
2670         adapter->shadow_vfta = kcalloc(E1000_VLAN_FILTER_TBL_SIZE, sizeof(u32),
2671                                        GFP_ATOMIC);
2672
2673         /* This call may decrease the number of queues */
2674         if (igb_init_interrupt_scheme(adapter, true)) {
2675                 dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
2676                 return -ENOMEM;
2677         }
2678
2679         igb_probe_vfs(adapter);
2680
2681         /* Explicitly disable IRQ since the NIC can be in any state. */
2682         igb_irq_disable(adapter);
2683
2684         if (hw->mac.type >= e1000_i350)
2685                 adapter->flags &= ~IGB_FLAG_DMAC;
2686
2687         set_bit(__IGB_DOWN, &adapter->state);
2688         return 0;
2689 }
2690
2691 /**
2692  * igb_open - Called when a network interface is made active
2693  * @netdev: network interface device structure
2694  *
2695  * Returns 0 on success, negative value on failure
2696  *
2697  * The open entry point is called when a network interface is made
2698  * active by the system (IFF_UP).  At this point all resources needed
2699  * for transmit and receive operations are allocated, the interrupt
2700  * handler is registered with the OS, the watchdog timer is started,
2701  * and the stack is notified that the interface is ready.
2702  **/
2703 static int __igb_open(struct net_device *netdev, bool resuming)
2704 {
2705         struct igb_adapter *adapter = netdev_priv(netdev);
2706         struct e1000_hw *hw = &adapter->hw;
2707         struct pci_dev *pdev = adapter->pdev;
2708         int err;
2709         int i;
2710
2711         /* disallow open during test */
2712         if (test_bit(__IGB_TESTING, &adapter->state)) {
2713                 WARN_ON(resuming);
2714                 return -EBUSY;
2715         }
2716
2717         if (!resuming)
2718                 pm_runtime_get_sync(&pdev->dev);
2719
2720         netif_carrier_off(netdev);
2721
2722         /* allocate transmit descriptors */
2723         err = igb_setup_all_tx_resources(adapter);
2724         if (err)
2725                 goto err_setup_tx;
2726
2727         /* allocate receive descriptors */
2728         err = igb_setup_all_rx_resources(adapter);
2729         if (err)
2730                 goto err_setup_rx;
2731
2732         igb_power_up_link(adapter);
2733
2734         /* before we allocate an interrupt, we must be ready to handle it.
2735          * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
2736          * as soon as we call pci_request_irq, so we have to setup our
2737          * clean_rx handler before we do so.  */
2738         igb_configure(adapter);
2739
2740         err = igb_request_irq(adapter);
2741         if (err)
2742                 goto err_req_irq;
2743
2744         /* Notify the stack of the actual queue counts. */
2745         err = netif_set_real_num_tx_queues(adapter->netdev,
2746                                            adapter->num_tx_queues);
2747         if (err)
2748                 goto err_set_queues;
2749
2750         err = netif_set_real_num_rx_queues(adapter->netdev,
2751                                            adapter->num_rx_queues);
2752         if (err)
2753                 goto err_set_queues;
2754
2755         /* From here on the code is the same as igb_up() */
2756         clear_bit(__IGB_DOWN, &adapter->state);
2757
2758         for (i = 0; i < adapter->num_q_vectors; i++)
2759                 napi_enable(&(adapter->q_vector[i]->napi));
2760
2761         /* Clear any pending interrupts. */
2762         rd32(E1000_ICR);
2763
2764         igb_irq_enable(adapter);
2765
2766         /* notify VFs that reset has been completed */
2767         if (adapter->vfs_allocated_count) {
2768                 u32 reg_data = rd32(E1000_CTRL_EXT);
2769                 reg_data |= E1000_CTRL_EXT_PFRSTD;
2770                 wr32(E1000_CTRL_EXT, reg_data);
2771         }
2772
2773         netif_tx_start_all_queues(netdev);
2774
2775         if (!resuming)
2776                 pm_runtime_put(&pdev->dev);
2777
2778         /* start the watchdog. */
2779         hw->mac.get_link_status = 1;
2780         schedule_work(&adapter->watchdog_task);
2781
2782         return 0;
2783
2784 err_set_queues:
2785         igb_free_irq(adapter);
2786 err_req_irq:
2787         igb_release_hw_control(adapter);
2788         igb_power_down_link(adapter);
2789         igb_free_all_rx_resources(adapter);
2790 err_setup_rx:
2791         igb_free_all_tx_resources(adapter);
2792 err_setup_tx:
2793         igb_reset(adapter);
2794         if (!resuming)
2795                 pm_runtime_put(&pdev->dev);
2796
2797         return err;
2798 }
2799
2800 static int igb_open(struct net_device *netdev)
2801 {
2802         return __igb_open(netdev, false);
2803 }
2804
2805 /**
2806  * igb_close - Disables a network interface
2807  * @netdev: network interface device structure
2808  *
2809  * Returns 0, this is not allowed to fail
2810  *
2811  * The close entry point is called when an interface is de-activated
2812  * by the OS.  The hardware is still under the driver's control, but
2813  * needs to be disabled.  A global MAC reset is issued to stop the
2814  * hardware, and all transmit and receive resources are freed.
2815  **/
2816 static int __igb_close(struct net_device *netdev, bool suspending)
2817 {
2818         struct igb_adapter *adapter = netdev_priv(netdev);
2819         struct pci_dev *pdev = adapter->pdev;
2820
2821         WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
2822
2823         if (!suspending)
2824                 pm_runtime_get_sync(&pdev->dev);
2825
2826         igb_down(adapter);
2827         igb_free_irq(adapter);
2828
2829         igb_free_all_tx_resources(adapter);
2830         igb_free_all_rx_resources(adapter);
2831
2832         if (!suspending)
2833                 pm_runtime_put_sync(&pdev->dev);
2834         return 0;
2835 }
2836
2837 static int igb_close(struct net_device *netdev)
2838 {
2839         return __igb_close(netdev, false);
2840 }
2841
2842 /**
2843  * igb_setup_tx_resources - allocate Tx resources (Descriptors)
2844  * @tx_ring: tx descriptor ring (for a specific queue) to setup
2845  *
2846  * Return 0 on success, negative on failure
2847  **/
2848 int igb_setup_tx_resources(struct igb_ring *tx_ring)
2849 {
2850         struct device *dev = tx_ring->dev;
2851         int size;
2852
2853         size = sizeof(struct igb_tx_buffer) * tx_ring->count;
2854
2855         tx_ring->tx_buffer_info = vzalloc(size);
2856         if (!tx_ring->tx_buffer_info)
2857                 goto err;
2858
2859         /* round up to nearest 4K */
2860         tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
2861         tx_ring->size = ALIGN(tx_ring->size, 4096);
2862
2863         tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
2864                                            &tx_ring->dma, GFP_KERNEL);
2865         if (!tx_ring->desc)
2866                 goto err;
2867
2868         tx_ring->next_to_use = 0;
2869         tx_ring->next_to_clean = 0;
2870
2871         return 0;
2872
2873 err:
2874         vfree(tx_ring->tx_buffer_info);
2875         tx_ring->tx_buffer_info = NULL;
2876         dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n");
2877         return -ENOMEM;
2878 }
2879
2880 /**
2881  * igb_setup_all_tx_resources - wrapper to allocate Tx resources
2882  *                                (Descriptors) for all queues
2883  * @adapter: board private structure
2884  *
2885  * Return 0 on success, negative on failure
2886  **/
2887 static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
2888 {
2889         struct pci_dev *pdev = adapter->pdev;
2890         int i, err = 0;
2891
2892         for (i = 0; i < adapter->num_tx_queues; i++) {
2893                 err = igb_setup_tx_resources(adapter->tx_ring[i]);
2894                 if (err) {
2895                         dev_err(&pdev->dev,
2896                                 "Allocation for Tx Queue %u failed\n", i);
2897                         for (i--; i >= 0; i--)
2898                                 igb_free_tx_resources(adapter->tx_ring[i]);
2899                         break;
2900                 }
2901         }
2902
2903         return err;
2904 }
2905
2906 /**
2907  * igb_setup_tctl - configure the transmit control registers
2908  * @adapter: Board private structure
2909  **/
2910 void igb_setup_tctl(struct igb_adapter *adapter)
2911 {
2912         struct e1000_hw *hw = &adapter->hw;
2913         u32 tctl;
2914
2915         /* disable queue 0 which is enabled by default on 82575 and 82576 */
2916         wr32(E1000_TXDCTL(0), 0);
2917
2918         /* Program the Transmit Control Register */
2919         tctl = rd32(E1000_TCTL);
2920         tctl &= ~E1000_TCTL_CT;
2921         tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
2922                 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
2923
2924         igb_config_collision_dist(hw);
2925
2926         /* Enable transmits */
2927         tctl |= E1000_TCTL_EN;
2928
2929         wr32(E1000_TCTL, tctl);
2930 }
2931
2932 /**
2933  * igb_configure_tx_ring - Configure transmit ring after Reset
2934  * @adapter: board private structure
2935  * @ring: tx ring to configure
2936  *
2937  * Configure a transmit ring after a reset.
2938  **/
2939 void igb_configure_tx_ring(struct igb_adapter *adapter,
2940                            struct igb_ring *ring)
2941 {
2942         struct e1000_hw *hw = &adapter->hw;
2943         u32 txdctl = 0;
2944         u64 tdba = ring->dma;
2945         int reg_idx = ring->reg_idx;
2946
2947         /* disable the queue */
2948         wr32(E1000_TXDCTL(reg_idx), 0);
2949         wrfl();
2950         mdelay(10);
2951
2952         wr32(E1000_TDLEN(reg_idx),
2953                         ring->count * sizeof(union e1000_adv_tx_desc));
2954         wr32(E1000_TDBAL(reg_idx),
2955                         tdba & 0x00000000ffffffffULL);
2956         wr32(E1000_TDBAH(reg_idx), tdba >> 32);
2957
2958         ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
2959         wr32(E1000_TDH(reg_idx), 0);
2960         writel(0, ring->tail);
2961
2962         txdctl |= IGB_TX_PTHRESH;
2963         txdctl |= IGB_TX_HTHRESH << 8;
2964         txdctl |= IGB_TX_WTHRESH << 16;
2965
2966         txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
2967         wr32(E1000_TXDCTL(reg_idx), txdctl);
2968 }
2969
2970 /**
2971  * igb_configure_tx - Configure transmit Unit after Reset
2972  * @adapter: board private structure
2973  *
2974  * Configure the Tx unit of the MAC after a reset.
2975  **/
2976 static void igb_configure_tx(struct igb_adapter *adapter)
2977 {
2978         int i;
2979
2980         for (i = 0; i < adapter->num_tx_queues; i++)
2981                 igb_configure_tx_ring(adapter, adapter->tx_ring[i]);
2982 }
2983
2984 /**
2985  * igb_setup_rx_resources - allocate Rx resources (Descriptors)
2986  * @rx_ring:    rx descriptor ring (for a specific queue) to setup
2987  *
2988  * Returns 0 on success, negative on failure
2989  **/
2990 int igb_setup_rx_resources(struct igb_ring *rx_ring)
2991 {
2992         struct device *dev = rx_ring->dev;
2993         int size;
2994
2995         size = sizeof(struct igb_rx_buffer) * rx_ring->count;
2996
2997         rx_ring->rx_buffer_info = vzalloc(size);
2998         if (!rx_ring->rx_buffer_info)
2999                 goto err;
3000
3001         /* Round up to nearest 4K */
3002         rx_ring->size = rx_ring->count * sizeof(union e1000_adv_rx_desc);
3003         rx_ring->size = ALIGN(rx_ring->size, 4096);
3004
3005         rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
3006                                            &rx_ring->dma, GFP_KERNEL);
3007         if (!rx_ring->desc)
3008                 goto err;
3009
3010         rx_ring->next_to_alloc = 0;
3011         rx_ring->next_to_clean = 0;
3012         rx_ring->next_to_use = 0;
3013
3014         return 0;
3015
3016 err:
3017         vfree(rx_ring->rx_buffer_info);
3018         rx_ring->rx_buffer_info = NULL;
3019         dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n");
3020         return -ENOMEM;
3021 }
3022
3023 /**
3024  * igb_setup_all_rx_resources - wrapper to allocate Rx resources
3025  *                                (Descriptors) for all queues
3026  * @adapter: board private structure
3027  *
3028  * Return 0 on success, negative on failure
3029  **/
3030 static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
3031 {
3032         struct pci_dev *pdev = adapter->pdev;
3033         int i, err = 0;
3034
3035         for (i = 0; i < adapter->num_rx_queues; i++) {
3036                 err = igb_setup_rx_resources(adapter->rx_ring[i]);
3037                 if (err) {
3038                         dev_err(&pdev->dev,
3039                                 "Allocation for Rx Queue %u failed\n", i);
3040                         for (i--; i >= 0; i--)
3041                                 igb_free_rx_resources(adapter->rx_ring[i]);
3042                         break;
3043                 }
3044         }
3045
3046         return err;
3047 }
3048
3049 /**
3050  * igb_setup_mrqc - configure the multiple receive queue control registers
3051  * @adapter: Board private structure
3052  **/
3053 static void igb_setup_mrqc(struct igb_adapter *adapter)
3054 {
3055         struct e1000_hw *hw = &adapter->hw;
3056         u32 mrqc, rxcsum;
3057         u32 j, num_rx_queues, shift = 0;
3058         static const u32 rsskey[10] = { 0xDA565A6D, 0xC20E5B25, 0x3D256741,
3059                                         0xB08FA343, 0xCB2BCAD0, 0xB4307BAE,
3060                                         0xA32DCB77, 0x0CF23080, 0x3BB7426A,
3061                                         0xFA01ACBE };
3062
3063         /* Fill out hash function seeds */
3064         for (j = 0; j < 10; j++)
3065                 wr32(E1000_RSSRK(j), rsskey[j]);
3066
3067         num_rx_queues = adapter->rss_queues;
3068
3069         switch (hw->mac.type) {
3070         case e1000_82575:
3071                 shift = 6;
3072                 break;
3073         case e1000_82576:
3074                 /* 82576 supports 2 RSS queues for SR-IOV */
3075                 if (adapter->vfs_allocated_count) {
3076                         shift = 3;
3077                         num_rx_queues = 2;
3078                 }
3079                 break;
3080         default:
3081                 break;
3082         }
3083
3084         /*
3085          * Populate the indirection table 4 entries at a time.  To do this
3086          * we are generating the results for n and n+2 and then interleaving
3087          * those with the results with n+1 and n+3.
3088          */
3089         for (j = 0; j < 32; j++) {
3090                 /* first pass generates n and n+2 */
3091                 u32 base = ((j * 0x00040004) + 0x00020000) * num_rx_queues;
3092                 u32 reta = (base & 0x07800780) >> (7 - shift);
3093
3094                 /* second pass generates n+1 and n+3 */
3095                 base += 0x00010001 * num_rx_queues;
3096                 reta |= (base & 0x07800780) << (1 + shift);
3097
3098                 wr32(E1000_RETA(j), reta);
3099         }
3100
3101         /*
3102          * Disable raw packet checksumming so that RSS hash is placed in
3103          * descriptor on writeback.  No need to enable TCP/UDP/IP checksum
3104          * offloads as they are enabled by default
3105          */
3106         rxcsum = rd32(E1000_RXCSUM);
3107         rxcsum |= E1000_RXCSUM_PCSD;
3108
3109         if (adapter->hw.mac.type >= e1000_82576)
3110                 /* Enable Receive Checksum Offload for SCTP */
3111                 rxcsum |= E1000_RXCSUM_CRCOFL;
3112
3113         /* Don't need to set TUOFL or IPOFL, they default to 1 */
3114         wr32(E1000_RXCSUM, rxcsum);
3115
3116         /* Generate RSS hash based on packet types, TCP/UDP
3117          * port numbers and/or IPv4/v6 src and dst addresses
3118          */
3119         mrqc = E1000_MRQC_RSS_FIELD_IPV4 |
3120                E1000_MRQC_RSS_FIELD_IPV4_TCP |
3121                E1000_MRQC_RSS_FIELD_IPV6 |
3122                E1000_MRQC_RSS_FIELD_IPV6_TCP |
3123                E1000_MRQC_RSS_FIELD_IPV6_TCP_EX;
3124
3125         if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP)
3126                 mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP;
3127         if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP)
3128                 mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP;
3129
3130         /* If VMDq is enabled then we set the appropriate mode for that, else
3131          * we default to RSS so that an RSS hash is calculated per packet even
3132          * if we are only using one queue */
3133         if (adapter->vfs_allocated_count) {
3134                 if (hw->mac.type > e1000_82575) {
3135                         /* Set the default pool for the PF's first queue */
3136                         u32 vtctl = rd32(E1000_VT_CTL);
3137                         vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
3138                                    E1000_VT_CTL_DISABLE_DEF_POOL);
3139                         vtctl |= adapter->vfs_allocated_count <<
3140                                 E1000_VT_CTL_DEFAULT_POOL_SHIFT;
3141                         wr32(E1000_VT_CTL, vtctl);
3142                 }
3143                 if (adapter->rss_queues > 1)
3144                         mrqc |= E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
3145                 else
3146                         mrqc |= E1000_MRQC_ENABLE_VMDQ;
3147         } else {
3148                 if (hw->mac.type != e1000_i211)
3149                         mrqc |= E1000_MRQC_ENABLE_RSS_4Q;
3150         }
3151         igb_vmm_control(adapter);
3152
3153         wr32(E1000_MRQC, mrqc);
3154 }
3155
3156 /**
3157  * igb_setup_rctl - configure the receive control registers
3158  * @adapter: Board private structure
3159  **/
3160 void igb_setup_rctl(struct igb_adapter *adapter)
3161 {
3162         struct e1000_hw *hw = &adapter->hw;
3163         u32 rctl;
3164
3165         rctl = rd32(E1000_RCTL);
3166
3167         rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
3168         rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
3169
3170         rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF |
3171                 (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
3172
3173         /*
3174          * enable stripping of CRC. It's unlikely this will break BMC
3175          * redirection as it did with e1000. Newer features require
3176          * that the HW strips the CRC.
3177          */
3178         rctl |= E1000_RCTL_SECRC;
3179
3180         /* disable store bad packets and clear size bits. */
3181         rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
3182
3183         /* enable LPE to prevent packets larger than max_frame_size */
3184         rctl |= E1000_RCTL_LPE;
3185
3186         /* disable queue 0 to prevent tail write w/o re-config */
3187         wr32(E1000_RXDCTL(0), 0);
3188
3189         /* Attention!!!  For SR-IOV PF driver operations you must enable
3190          * queue drop for all VF and PF queues to prevent head of line blocking
3191          * if an un-trusted VF does not provide descriptors to hardware.
3192          */
3193         if (adapter->vfs_allocated_count) {
3194                 /* set all queue drop enable bits */
3195                 wr32(E1000_QDE, ALL_QUEUES);
3196         }
3197
3198         /* This is useful for sniffing bad packets. */
3199         if (adapter->netdev->features & NETIF_F_RXALL) {
3200                 /* UPE and MPE will be handled by normal PROMISC logic
3201                  * in e1000e_set_rx_mode */
3202                 rctl |= (E1000_RCTL_SBP | /* Receive bad packets */
3203                          E1000_RCTL_BAM | /* RX All Bcast Pkts */
3204                          E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
3205
3206                 rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */
3207                           E1000_RCTL_DPF | /* Allow filtered pause */
3208                           E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
3209                 /* Do not mess with E1000_CTRL_VME, it affects transmit as well,
3210                  * and that breaks VLANs.
3211                  */
3212         }
3213
3214         wr32(E1000_RCTL, rctl);
3215 }
3216
3217 static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
3218                                    int vfn)
3219 {
3220         struct e1000_hw *hw = &adapter->hw;
3221         u32 vmolr;
3222
3223         /* if it isn't the PF check to see if VFs are enabled and
3224          * increase the size to support vlan tags */
3225         if (vfn < adapter->vfs_allocated_count &&
3226             adapter->vf_data[vfn].vlans_enabled)
3227                 size += VLAN_TAG_SIZE;
3228
3229         vmolr = rd32(E1000_VMOLR(vfn));
3230         vmolr &= ~E1000_VMOLR_RLPML_MASK;
3231         vmolr |= size | E1000_VMOLR_LPE;
3232         wr32(E1000_VMOLR(vfn), vmolr);
3233
3234         return 0;
3235 }
3236
3237 /**
3238  * igb_rlpml_set - set maximum receive packet size
3239  * @adapter: board private structure
3240  *
3241  * Configure maximum receivable packet size.
3242  **/
3243 static void igb_rlpml_set(struct igb_adapter *adapter)
3244 {
3245         u32 max_frame_size = adapter->max_frame_size;
3246         struct e1000_hw *hw = &adapter->hw;
3247         u16 pf_id = adapter->vfs_allocated_count;
3248
3249         if (pf_id) {
3250                 igb_set_vf_rlpml(adapter, max_frame_size, pf_id);
3251                 /*
3252                  * If we're in VMDQ or SR-IOV mode, then set global RLPML
3253                  * to our max jumbo frame size, in case we need to enable
3254                  * jumbo frames on one of the rings later.
3255                  * This will not pass over-length frames into the default
3256                  * queue because it's gated by the VMOLR.RLPML.
3257                  */
3258                 max_frame_size = MAX_JUMBO_FRAME_SIZE;
3259         }
3260
3261         wr32(E1000_RLPML, max_frame_size);
3262 }
3263
3264 static inline void igb_set_vmolr(struct igb_adapter *adapter,
3265                                  int vfn, bool aupe)
3266 {
3267         struct e1000_hw *hw = &adapter->hw;
3268         u32 vmolr;
3269
3270         /*
3271          * This register exists only on 82576 and newer so if we are older then
3272          * we should exit and do nothing
3273          */
3274         if (hw->mac.type < e1000_82576)
3275                 return;
3276
3277         vmolr = rd32(E1000_VMOLR(vfn));
3278         vmolr |= E1000_VMOLR_STRVLAN;      /* Strip vlan tags */
3279         if (aupe)
3280                 vmolr |= E1000_VMOLR_AUPE;        /* Accept untagged packets */
3281         else
3282                 vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */
3283
3284         /* clear all bits that might not be set */
3285         vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
3286
3287         if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count)
3288                 vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
3289         /*
3290          * for VMDq only allow the VFs and pool 0 to accept broadcast and
3291          * multicast packets
3292          */
3293         if (vfn <= adapter->vfs_allocated_count)
3294                 vmolr |= E1000_VMOLR_BAM;          /* Accept broadcast */
3295
3296         wr32(E1000_VMOLR(vfn), vmolr);
3297 }
3298
3299 /**
3300  * igb_configure_rx_ring - Configure a receive ring after Reset
3301  * @adapter: board private structure
3302  * @ring: receive ring to be configured
3303  *
3304  * Configure the Rx unit of the MAC after a reset.
3305  **/
3306 void igb_configure_rx_ring(struct igb_adapter *adapter,
3307                            struct igb_ring *ring)
3308 {
3309         struct e1000_hw *hw = &adapter->hw;
3310         u64 rdba = ring->dma;
3311         int reg_idx = ring->reg_idx;
3312         u32 srrctl = 0, rxdctl = 0;
3313
3314         /* disable the queue */
3315         wr32(E1000_RXDCTL(reg_idx), 0);
3316
3317         /* Set DMA base address registers */
3318         wr32(E1000_RDBAL(reg_idx),
3319              rdba & 0x00000000ffffffffULL);
3320         wr32(E1000_RDBAH(reg_idx), rdba >> 32);
3321         wr32(E1000_RDLEN(reg_idx),
3322                        ring->count * sizeof(union e1000_adv_rx_desc));
3323
3324         /* initialize head and tail */
3325         ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
3326         wr32(E1000_RDH(reg_idx), 0);
3327         writel(0, ring->tail);
3328
3329         /* set descriptor configuration */
3330         srrctl = IGB_RX_HDR_LEN << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
3331         srrctl |= IGB_RX_BUFSZ >> E1000_SRRCTL_BSIZEPKT_SHIFT;
3332         srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
3333         if (hw->mac.type >= e1000_82580)
3334                 srrctl |= E1000_SRRCTL_TIMESTAMP;
3335         /* Only set Drop Enable if we are supporting multiple queues */
3336         if (adapter->vfs_allocated_count || adapter->num_rx_queues > 1)
3337                 srrctl |= E1000_SRRCTL_DROP_EN;
3338
3339         wr32(E1000_SRRCTL(reg_idx), srrctl);
3340
3341         /* set filtering for VMDQ pools */
3342         igb_set_vmolr(adapter, reg_idx & 0x7, true);
3343
3344         rxdctl |= IGB_RX_PTHRESH;
3345         rxdctl |= IGB_RX_HTHRESH << 8;
3346         rxdctl |= IGB_RX_WTHRESH << 16;
3347
3348         /* enable receive descriptor fetching */
3349         rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
3350         wr32(E1000_RXDCTL(reg_idx), rxdctl);
3351 }
3352
3353 static void igb_set_rx_buffer_len(struct igb_adapter *adapter,
3354                                   struct igb_ring *rx_ring)
3355 {
3356 #define IGB_MAX_BUILD_SKB_SIZE \
3357         (SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) - \
3358          (NET_SKB_PAD + NET_IP_ALIGN + IGB_TS_HDR_LEN))
3359
3360         /* set build_skb flag */
3361         if (adapter->max_frame_size <= IGB_MAX_BUILD_SKB_SIZE)
3362                 set_ring_build_skb_enabled(rx_ring);
3363         else
3364                 clear_ring_build_skb_enabled(rx_ring);
3365 }
3366
3367 /**
3368  * igb_configure_rx - Configure receive Unit after Reset
3369  * @adapter: board private structure
3370  *
3371  * Configure the Rx unit of the MAC after a reset.
3372  **/
3373 static void igb_configure_rx(struct igb_adapter *adapter)
3374 {
3375         int i;
3376
3377         /* set UTA to appropriate mode */
3378         igb_set_uta(adapter);
3379
3380         /* set the correct pool for the PF default MAC address in entry 0 */
3381         igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
3382                          adapter->vfs_allocated_count);
3383
3384         /* Setup the HW Rx Head and Tail Descriptor Pointers and
3385          * the Base and Length of the Rx Descriptor Ring */
3386         for (i = 0; i < adapter->num_rx_queues; i++) {
3387                 struct igb_ring *rx_ring = adapter->rx_ring[i];
3388                 igb_set_rx_buffer_len(adapter, rx_ring);
3389                 igb_configure_rx_ring(adapter, rx_ring);
3390         }
3391 }
3392
3393 /**
3394  * igb_free_tx_resources - Free Tx Resources per Queue
3395  * @tx_ring: Tx descriptor ring for a specific queue
3396  *
3397  * Free all transmit software resources
3398  **/
3399 void igb_free_tx_resources(struct igb_ring *tx_ring)
3400 {
3401         igb_clean_tx_ring(tx_ring);
3402
3403         vfree(tx_ring->tx_buffer_info);
3404         tx_ring->tx_buffer_info = NULL;
3405
3406         /* if not set, then don't free */
3407         if (!tx_ring->desc)
3408                 return;
3409
3410         dma_free_coherent(tx_ring->dev, tx_ring->size,
3411                           tx_ring->desc, tx_ring->dma);
3412
3413         tx_ring->desc = NULL;
3414 }
3415
3416 /**
3417  * igb_free_all_tx_resources - Free Tx Resources for All Queues
3418  * @adapter: board private structure
3419  *
3420  * Free all transmit software resources
3421  **/
3422 static void igb_free_all_tx_resources(struct igb_adapter *adapter)
3423 {
3424         int i;
3425
3426         for (i = 0; i < adapter->num_tx_queues; i++)
3427                 igb_free_tx_resources(adapter->tx_ring[i]);
3428 }
3429
3430 void igb_unmap_and_free_tx_resource(struct igb_ring *ring,
3431                                     struct igb_tx_buffer *tx_buffer)
3432 {
3433         if (tx_buffer->skb) {
3434                 dev_kfree_skb_any(tx_buffer->skb);
3435                 if (dma_unmap_len(tx_buffer, len))
3436                         dma_unmap_single(ring->dev,
3437                                          dma_unmap_addr(tx_buffer, dma),
3438                                          dma_unmap_len(tx_buffer, len),
3439                                          DMA_TO_DEVICE);
3440         } else if (dma_unmap_len(tx_buffer, len)) {
3441                 dma_unmap_page(ring->dev,
3442                                dma_unmap_addr(tx_buffer, dma),
3443                                dma_unmap_len(tx_buffer, len),
3444                                DMA_TO_DEVICE);
3445         }
3446         tx_buffer->next_to_watch = NULL;
3447         tx_buffer->skb = NULL;
3448         dma_unmap_len_set(tx_buffer, len, 0);
3449         /* buffer_info must be completely set up in the transmit path */
3450 }
3451
3452 /**
3453  * igb_clean_tx_ring - Free Tx Buffers
3454  * @tx_ring: ring to be cleaned
3455  **/
3456 static void igb_clean_tx_ring(struct igb_ring *tx_ring)
3457 {
3458         struct igb_tx_buffer *buffer_info;
3459         unsigned long size;
3460         u16 i;
3461
3462         if (!tx_ring->tx_buffer_info)
3463                 return;
3464         /* Free all the Tx ring sk_buffs */
3465
3466         for (i = 0; i < tx_ring->count; i++) {
3467                 buffer_info = &tx_ring->tx_buffer_info[i];
3468                 igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
3469         }
3470
3471         netdev_tx_reset_queue(txring_txq(tx_ring));
3472
3473         size = sizeof(struct igb_tx_buffer) * tx_ring->count;
3474         memset(tx_ring->tx_buffer_info, 0, size);
3475
3476         /* Zero out the descriptor ring */
3477         memset(tx_ring->desc, 0, tx_ring->size);
3478
3479         tx_ring->next_to_use = 0;
3480         tx_ring->next_to_clean = 0;
3481 }
3482
3483 /**
3484  * igb_clean_all_tx_rings - Free Tx Buffers for all queues
3485  * @adapter: board private structure
3486  **/
3487 static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
3488 {
3489         int i;
3490
3491         for (i = 0; i < adapter->num_tx_queues; i++)
3492                 igb_clean_tx_ring(adapter->tx_ring[i]);
3493 }
3494
3495 /**
3496  * igb_free_rx_resources - Free Rx Resources
3497  * @rx_ring: ring to clean the resources from
3498  *
3499  * Free all receive software resources
3500  **/
3501 void igb_free_rx_resources(struct igb_ring *rx_ring)
3502 {
3503         igb_clean_rx_ring(rx_ring);
3504
3505         vfree(rx_ring->rx_buffer_info);
3506         rx_ring->rx_buffer_info = NULL;
3507
3508         /* if not set, then don't free */
3509         if (!rx_ring->desc)
3510                 return;
3511
3512         dma_free_coherent(rx_ring->dev, rx_ring->size,
3513                           rx_ring->desc, rx_ring->dma);
3514
3515         rx_ring->desc = NULL;
3516 }
3517
3518 /**
3519  * igb_free_all_rx_resources - Free Rx Resources for All Queues
3520  * @adapter: board private structure
3521  *
3522  * Free all receive software resources
3523  **/
3524 static void igb_free_all_rx_resources(struct igb_adapter *adapter)
3525 {
3526         int i;
3527
3528         for (i = 0; i < adapter->num_rx_queues; i++)
3529                 igb_free_rx_resources(adapter->rx_ring[i]);
3530 }
3531
3532 /**
3533  * igb_clean_rx_ring - Free Rx Buffers per Queue
3534  * @rx_ring: ring to free buffers from
3535  **/
3536 static void igb_clean_rx_ring(struct igb_ring *rx_ring)
3537 {
3538         unsigned long size;
3539         u16 i;
3540
3541         if (rx_ring->skb)
3542                 dev_kfree_skb(rx_ring->skb);
3543         rx_ring->skb = NULL;
3544
3545         if (!rx_ring->rx_buffer_info)
3546                 return;
3547
3548         /* Free all the Rx ring sk_buffs */
3549         for (i = 0; i < rx_ring->count; i++) {
3550                 struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i];
3551
3552                 if (!buffer_info->page)
3553                         continue;
3554
3555                 dma_unmap_page(rx_ring->dev,
3556                                buffer_info->dma,
3557                                PAGE_SIZE,
3558                                DMA_FROM_DEVICE);
3559                 __free_page(buffer_info->page);
3560
3561                 buffer_info->page = NULL;
3562         }
3563
3564         size = sizeof(struct igb_rx_buffer) * rx_ring->count;
3565         memset(rx_ring->rx_buffer_info, 0, size);
3566
3567         /* Zero out the descriptor ring */
3568         memset(rx_ring->desc, 0, rx_ring->size);
3569
3570         rx_ring->next_to_alloc = 0;
3571         rx_ring->next_to_clean = 0;
3572         rx_ring->next_to_use = 0;
3573 }
3574
3575 /**
3576  * igb_clean_all_rx_rings - Free Rx Buffers for all queues
3577  * @adapter: board private structure
3578  **/
3579 static void igb_clean_all_rx_rings(struct igb_adapter *adapter)
3580 {
3581         int i;
3582
3583         for (i = 0; i < adapter->num_rx_queues; i++)
3584                 igb_clean_rx_ring(adapter->rx_ring[i]);
3585 }
3586
3587 /**
3588  * igb_set_mac - Change the Ethernet Address of the NIC
3589  * @netdev: network interface device structure
3590  * @p: pointer to an address structure
3591  *
3592  * Returns 0 on success, negative on failure
3593  **/
3594 static int igb_set_mac(struct net_device *netdev, void *p)
3595 {
3596         struct igb_adapter *adapter = netdev_priv(netdev);
3597         struct e1000_hw *hw = &adapter->hw;
3598         struct sockaddr *addr = p;
3599
3600         if (!is_valid_ether_addr(addr->sa_data))
3601                 return -EADDRNOTAVAIL;
3602
3603         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
3604         memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
3605
3606         /* set the correct pool for the new PF MAC address in entry 0 */
3607         igb_rar_set_qsel(adapter, hw->mac.addr, 0,
3608                          adapter->vfs_allocated_count);
3609
3610         return 0;
3611 }
3612
3613 /**
3614  * igb_write_mc_addr_list - write multicast addresses to MTA
3615  * @netdev: network interface device structure
3616  *
3617  * Writes multicast address list to the MTA hash table.
3618  * Returns: -ENOMEM on failure
3619  *                0 on no addresses written
3620  *                X on writing X addresses to MTA
3621  **/
3622 static int igb_write_mc_addr_list(struct net_device *netdev)
3623 {
3624         struct igb_adapter *adapter = netdev_priv(netdev);
3625         struct e1000_hw *hw = &adapter->hw;
3626         struct netdev_hw_addr *ha;
3627         u8  *mta_list;
3628         int i;
3629
3630         if (netdev_mc_empty(netdev)) {
3631                 /* nothing to program, so clear mc list */
3632                 igb_update_mc_addr_list(hw, NULL, 0);
3633                 igb_restore_vf_multicasts(adapter);
3634                 return 0;
3635         }
3636
3637         mta_list = kzalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
3638         if (!mta_list)
3639                 return -ENOMEM;
3640
3641         /* The shared function expects a packed array of only addresses. */
3642         i = 0;
3643         netdev_for_each_mc_addr(ha, netdev)
3644                 memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
3645
3646         igb_update_mc_addr_list(hw, mta_list, i);
3647         kfree(mta_list);
3648
3649         return netdev_mc_count(netdev);
3650 }
3651
3652 /**
3653  * igb_write_uc_addr_list - write unicast addresses to RAR table
3654  * @netdev: network interface device structure
3655  *
3656  * Writes unicast address list to the RAR table.
3657  * Returns: -ENOMEM on failure/insufficient address space
3658  *                0 on no addresses written
3659  *                X on writing X addresses to the RAR table
3660  **/
3661 static int igb_write_uc_addr_list(struct net_device *netdev)
3662 {
3663         struct igb_adapter *adapter = netdev_priv(netdev);
3664         struct e1000_hw *hw = &adapter->hw;
3665         unsigned int vfn = adapter->vfs_allocated_count;
3666         unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
3667         int count = 0;
3668
3669         /* return ENOMEM indicating insufficient memory for addresses */
3670         if (netdev_uc_count(netdev) > rar_entries)
3671                 return -ENOMEM;
3672
3673         if (!netdev_uc_empty(netdev) && rar_entries) {
3674                 struct netdev_hw_addr *ha;
3675
3676                 netdev_for_each_uc_addr(ha, netdev) {
3677                         if (!rar_entries)
3678                                 break;
3679                         igb_rar_set_qsel(adapter, ha->addr,
3680                                          rar_entries--,
3681                                          vfn);
3682                         count++;
3683                 }
3684         }
3685         /* write the addresses in reverse order to avoid write combining */
3686         for (; rar_entries > 0 ; rar_entries--) {
3687                 wr32(E1000_RAH(rar_entries), 0);
3688                 wr32(E1000_RAL(rar_entries), 0);
3689         }
3690         wrfl();
3691
3692         return count;
3693 }
3694
3695 /**
3696  * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
3697  * @netdev: network interface device structure
3698  *
3699  * The set_rx_mode entry point is called whenever the unicast or multicast
3700  * address lists or the network interface flags are updated.  This routine is
3701  * responsible for configuring the hardware for proper unicast, multicast,
3702  * promiscuous mode, and all-multi behavior.
3703  **/
3704 static void igb_set_rx_mode(struct net_device *netdev)
3705 {
3706         struct igb_adapter *adapter = netdev_priv(netdev);
3707         struct e1000_hw *hw = &adapter->hw;
3708         unsigned int vfn = adapter->vfs_allocated_count;
3709         u32 rctl, vmolr = 0;
3710         int count;
3711
3712         /* Check for Promiscuous and All Multicast modes */
3713         rctl = rd32(E1000_RCTL);
3714
3715         /* clear the effected bits */
3716         rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
3717
3718         if (netdev->flags & IFF_PROMISC) {
3719                 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
3720                 vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
3721         } else {
3722                 if (netdev->flags & IFF_ALLMULTI) {
3723                         rctl |= E1000_RCTL_MPE;
3724                         vmolr |= E1000_VMOLR_MPME;
3725                 } else {
3726                         /*
3727                          * Write addresses to the MTA, if the attempt fails
3728                          * then we should just turn on promiscuous mode so
3729                          * that we can at least receive multicast traffic
3730                          */
3731                         count = igb_write_mc_addr_list(netdev);
3732                         if (count < 0) {
3733                                 rctl |= E1000_RCTL_MPE;
3734                                 vmolr |= E1000_VMOLR_MPME;
3735                         } else if (count) {
3736                                 vmolr |= E1000_VMOLR_ROMPE;
3737                         }
3738                 }
3739                 /*
3740                  * Write addresses to available RAR registers, if there is not
3741                  * sufficient space to store all the addresses then enable
3742                  * unicast promiscuous mode
3743                  */
3744                 count = igb_write_uc_addr_list(netdev);
3745                 if (count < 0) {
3746                         rctl |= E1000_RCTL_UPE;
3747                         vmolr |= E1000_VMOLR_ROPE;
3748                 }
3749                 rctl |= E1000_RCTL_VFE;
3750         }
3751         wr32(E1000_RCTL, rctl);
3752
3753         /*
3754          * In order to support SR-IOV and eventually VMDq it is necessary to set
3755          * the VMOLR to enable the appropriate modes.  Without this workaround
3756          * we will have issues with VLAN tag stripping not being done for frames
3757          * that are only arriving because we are the default pool
3758          */
3759         if ((hw->mac.type < e1000_82576) || (hw->mac.type > e1000_i350))
3760                 return;
3761
3762         vmolr |= rd32(E1000_VMOLR(vfn)) &
3763                  ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
3764         wr32(E1000_VMOLR(vfn), vmolr);
3765         igb_restore_vf_multicasts(adapter);
3766 }
3767
3768 static void igb_check_wvbr(struct igb_adapter *adapter)
3769 {
3770         struct e1000_hw *hw = &adapter->hw;
3771         u32 wvbr = 0;
3772
3773         switch (hw->mac.type) {
3774         case e1000_82576:
3775         case e1000_i350:
3776                 if (!(wvbr = rd32(E1000_WVBR)))
3777                         return;
3778                 break;
3779         default:
3780                 break;
3781         }
3782
3783         adapter->wvbr |= wvbr;
3784 }
3785
3786 #define IGB_STAGGERED_QUEUE_OFFSET 8
3787
3788 static void igb_spoof_check(struct igb_adapter *adapter)
3789 {
3790         int j;
3791
3792         if (!adapter->wvbr)
3793                 return;
3794
3795         for(j = 0; j < adapter->vfs_allocated_count; j++) {
3796                 if (adapter->wvbr & (1 << j) ||
3797                     adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) {
3798                         dev_warn(&adapter->pdev->dev,
3799                                 "Spoof event(s) detected on VF %d\n", j);
3800                         adapter->wvbr &=
3801                                 ~((1 << j) |
3802                                   (1 << (j + IGB_STAGGERED_QUEUE_OFFSET)));
3803                 }
3804         }
3805 }
3806
3807 /* Need to wait a few seconds after link up to get diagnostic information from
3808  * the phy */
3809 static void igb_update_phy_info(unsigned long data)
3810 {
3811         struct igb_adapter *adapter = (struct igb_adapter *) data;
3812         igb_get_phy_info(&adapter->hw);
3813 }
3814
3815 /**
3816  * igb_has_link - check shared code for link and determine up/down
3817  * @adapter: pointer to driver private info
3818  **/
3819 bool igb_has_link(struct igb_adapter *adapter)
3820 {
3821         struct e1000_hw *hw = &adapter->hw;
3822         bool link_active = false;
3823         s32 ret_val = 0;
3824
3825         /* get_link_status is set on LSC (link status) interrupt or
3826          * rx sequence error interrupt.  get_link_status will stay
3827          * false until the e1000_check_for_link establishes link
3828          * for copper adapters ONLY
3829          */
3830         switch (hw->phy.media_type) {
3831         case e1000_media_type_copper:
3832                 if (hw->mac.get_link_status) {
3833                         ret_val = hw->mac.ops.check_for_link(hw);
3834                         link_active = !hw->mac.get_link_status;
3835                 } else {
3836                         link_active = true;
3837                 }
3838                 break;
3839         case e1000_media_type_internal_serdes:
3840                 ret_val = hw->mac.ops.check_for_link(hw);
3841                 link_active = hw->mac.serdes_has_link;
3842                 break;
3843         default:
3844         case e1000_media_type_unknown:
3845                 break;
3846         }
3847
3848         return link_active;
3849 }
3850
3851 static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event)
3852 {
3853         bool ret = false;
3854         u32 ctrl_ext, thstat;
3855
3856         /* check for thermal sensor event on i350 copper only */
3857         if (hw->mac.type == e1000_i350) {
3858                 thstat = rd32(E1000_THSTAT);
3859                 ctrl_ext = rd32(E1000_CTRL_EXT);
3860
3861                 if ((hw->phy.media_type == e1000_media_type_copper) &&
3862                     !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII)) {
3863                         ret = !!(thstat & event);
3864                 }
3865         }
3866
3867         return ret;
3868 }
3869
3870 /**
3871  * igb_watchdog - Timer Call-back
3872  * @data: pointer to adapter cast into an unsigned long
3873  **/
3874 static void igb_watchdog(unsigned long data)
3875 {
3876         struct igb_adapter *adapter = (struct igb_adapter *)data;
3877         /* Do the rest outside of interrupt context */
3878         schedule_work(&adapter->watchdog_task);
3879 }
3880
3881 static void igb_watchdog_task(struct work_struct *work)
3882 {
3883         struct igb_adapter *adapter = container_of(work,
3884                                                    struct igb_adapter,
3885                                                    watchdog_task);
3886         struct e1000_hw *hw = &adapter->hw;
3887         struct net_device *netdev = adapter->netdev;
3888         u32 link;
3889         int i;
3890
3891         link = igb_has_link(adapter);
3892         if (link) {
3893                 /* Cancel scheduled suspend requests. */
3894                 pm_runtime_resume(netdev->dev.parent);
3895
3896                 if (!netif_carrier_ok(netdev)) {
3897                         u32 ctrl;
3898                         hw->mac.ops.get_speed_and_duplex(hw,
3899                                                          &adapter->link_speed,
3900                                                          &adapter->link_duplex);
3901
3902                         ctrl = rd32(E1000_CTRL);
3903                         /* Links status message must follow this format */
3904                         printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s "
3905                                "Duplex, Flow Control: %s\n",
3906                                netdev->name,
3907                                adapter->link_speed,
3908                                adapter->link_duplex == FULL_DUPLEX ?
3909                                "Full" : "Half",
3910                                (ctrl & E1000_CTRL_TFCE) &&
3911                                (ctrl & E1000_CTRL_RFCE) ? "RX/TX" :
3912                                (ctrl & E1000_CTRL_RFCE) ?  "RX" :
3913                                (ctrl & E1000_CTRL_TFCE) ?  "TX" : "None");
3914
3915                         /* check for thermal sensor event */
3916                         if (igb_thermal_sensor_event(hw,
3917                             E1000_THSTAT_LINK_THROTTLE)) {
3918                                 netdev_info(netdev, "The network adapter link "
3919                                             "speed was downshifted because it "
3920                                             "overheated\n");
3921                         }
3922
3923                         /* adjust timeout factor according to speed/duplex */
3924                         adapter->tx_timeout_factor = 1;
3925                         switch (adapter->link_speed) {
3926                         case SPEED_10:
3927                                 adapter->tx_timeout_factor = 14;
3928                                 break;
3929                         case SPEED_100:
3930                                 /* maybe add some timeout factor ? */
3931                                 break;
3932                         }
3933
3934                         netif_carrier_on(netdev);
3935
3936                         igb_ping_all_vfs(adapter);
3937                         igb_check_vf_rate_limit(adapter);
3938
3939                         /* link state has changed, schedule phy info update */
3940                         if (!test_bit(__IGB_DOWN, &adapter->state))
3941                                 mod_timer(&adapter->phy_info_timer,
3942                                           round_jiffies(jiffies + 2 * HZ));
3943                 }
3944         } else {
3945                 if (netif_carrier_ok(netdev)) {
3946                         adapter->link_speed = 0;
3947                         adapter->link_duplex = 0;
3948
3949                         /* check for thermal sensor event */
3950                         if (igb_thermal_sensor_event(hw,
3951                             E1000_THSTAT_PWR_DOWN)) {
3952                                 netdev_err(netdev, "The network adapter was "
3953                                            "stopped because it overheated\n");
3954                         }
3955
3956                         /* Links status message must follow this format */
3957                         printk(KERN_INFO "igb: %s NIC Link is Down\n",
3958                                netdev->name);
3959                         netif_carrier_off(netdev);
3960
3961                         igb_ping_all_vfs(adapter);
3962
3963                         /* link state has changed, schedule phy info update */
3964                         if (!test_bit(__IGB_DOWN, &adapter->state))
3965                                 mod_timer(&adapter->phy_info_timer,
3966                                           round_jiffies(jiffies + 2 * HZ));
3967
3968                         pm_schedule_suspend(netdev->dev.parent,
3969                                             MSEC_PER_SEC * 5);
3970                 }
3971         }
3972
3973         spin_lock(&adapter->stats64_lock);
3974         igb_update_stats(adapter, &adapter->stats64);
3975         spin_unlock(&adapter->stats64_lock);
3976
3977         for (i = 0; i < adapter->num_tx_queues; i++) {
3978                 struct igb_ring *tx_ring = adapter->tx_ring[i];
3979                 if (!netif_carrier_ok(netdev)) {
3980                         /* We've lost link, so the controller stops DMA,
3981                          * but we've got queued Tx work that's never going
3982                          * to get done, so reset controller to flush Tx.
3983                          * (Do the reset outside of interrupt context). */
3984                         if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
3985                                 adapter->tx_timeout_count++;
3986                                 schedule_work(&adapter->reset_task);
3987                                 /* return immediately since reset is imminent */
3988                                 return;
3989                         }
3990                 }
3991
3992                 /* Force detection of hung controller every watchdog period */
3993                 set_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
3994         }
3995
3996         /* Cause software interrupt to ensure rx ring is cleaned */
3997         if (adapter->msix_entries) {
3998                 u32 eics = 0;
3999                 for (i = 0; i < adapter->num_q_vectors; i++)
4000                         eics |= adapter->q_vector[i]->eims_value;
4001                 wr32(E1000_EICS, eics);
4002         } else {
4003                 wr32(E1000_ICS, E1000_ICS_RXDMT0);
4004         }
4005
4006         igb_spoof_check(adapter);
4007         igb_ptp_rx_hang(adapter);
4008
4009         /* Reset the timer */
4010         if (!test_bit(__IGB_DOWN, &adapter->state))
4011                 mod_timer(&adapter->watchdog_timer,
4012                           round_jiffies(jiffies + 2 * HZ));
4013 }
4014
4015 enum latency_range {
4016         lowest_latency = 0,
4017         low_latency = 1,
4018         bulk_latency = 2,
4019         latency_invalid = 255
4020 };
4021
4022 /**
4023  * igb_update_ring_itr - update the dynamic ITR value based on packet size
4024  *
4025  *      Stores a new ITR value based on strictly on packet size.  This
4026  *      algorithm is less sophisticated than that used in igb_update_itr,
4027  *      due to the difficulty of synchronizing statistics across multiple
4028  *      receive rings.  The divisors and thresholds used by this function
4029  *      were determined based on theoretical maximum wire speed and testing
4030  *      data, in order to minimize response time while increasing bulk
4031  *      throughput.
4032  *      This functionality is controlled by the InterruptThrottleRate module
4033  *      parameter (see igb_param.c)
4034  *      NOTE:  This function is called only when operating in a multiqueue
4035  *             receive environment.
4036  * @q_vector: pointer to q_vector
4037  **/
4038 static void igb_update_ring_itr(struct igb_q_vector *q_vector)
4039 {
4040         int new_val = q_vector->itr_val;
4041         int avg_wire_size = 0;
4042         struct igb_adapter *adapter = q_vector->adapter;
4043         unsigned int packets;
4044
4045         /* For non-gigabit speeds, just fix the interrupt rate at 4000
4046          * ints/sec - ITR timer value of 120 ticks.
4047          */
4048         if (adapter->link_speed != SPEED_1000) {
4049                 new_val = IGB_4K_ITR;
4050                 goto set_itr_val;
4051         }
4052
4053         packets = q_vector->rx.total_packets;
4054         if (packets)
4055                 avg_wire_size = q_vector->rx.total_bytes / packets;
4056
4057         packets = q_vector->tx.total_packets;
4058         if (packets)
4059                 avg_wire_size = max_t(u32, avg_wire_size,
4060                                       q_vector->tx.total_bytes / packets);
4061
4062         /* if avg_wire_size isn't set no work was done */
4063         if (!avg_wire_size)
4064                 goto clear_counts;
4065
4066         /* Add 24 bytes to size to account for CRC, preamble, and gap */
4067         avg_wire_size += 24;
4068
4069         /* Don't starve jumbo frames */
4070         avg_wire_size = min(avg_wire_size, 3000);
4071
4072         /* Give a little boost to mid-size frames */
4073         if ((avg_wire_size > 300) && (avg_wire_size < 1200))
4074                 new_val = avg_wire_size / 3;
4075         else
4076                 new_val = avg_wire_size / 2;
4077
4078         /* conservative mode (itr 3) eliminates the lowest_latency setting */
4079         if (new_val < IGB_20K_ITR &&
4080             ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
4081              (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
4082                 new_val = IGB_20K_ITR;
4083
4084 set_itr_val:
4085         if (new_val != q_vector->itr_val) {
4086                 q_vector->itr_val = new_val;
4087                 q_vector->set_itr = 1;
4088         }
4089 clear_counts:
4090         q_vector->rx.total_bytes = 0;
4091         q_vector->rx.total_packets = 0;
4092         q_vector->tx.total_bytes = 0;
4093         q_vector->tx.total_packets = 0;
4094 }
4095
4096 /**
4097  * igb_update_itr - update the dynamic ITR value based on statistics
4098  *      Stores a new ITR value based on packets and byte
4099  *      counts during the last interrupt.  The advantage of per interrupt
4100  *      computation is faster updates and more accurate ITR for the current
4101  *      traffic pattern.  Constants in this function were computed
4102  *      based on theoretical maximum wire speed and thresholds were set based
4103  *      on testing data as well as attempting to minimize response time
4104  *      while increasing bulk throughput.
4105  *      this functionality is controlled by the InterruptThrottleRate module
4106  *      parameter (see igb_param.c)
4107  *      NOTE:  These calculations are only valid when operating in a single-
4108  *             queue environment.
4109  * @q_vector: pointer to q_vector
4110  * @ring_container: ring info to update the itr for
4111  **/
4112 static void igb_update_itr(struct igb_q_vector *q_vector,
4113                            struct igb_ring_container *ring_container)
4114 {
4115         unsigned int packets = ring_container->total_packets;
4116         unsigned int bytes = ring_container->total_bytes;
4117         u8 itrval = ring_container->itr;
4118
4119         /* no packets, exit with status unchanged */
4120         if (packets == 0)
4121                 return;
4122
4123         switch (itrval) {
4124         case lowest_latency:
4125                 /* handle TSO and jumbo frames */
4126                 if (bytes/packets > 8000)
4127                         itrval = bulk_latency;
4128                 else if ((packets < 5) && (bytes > 512))
4129                         itrval = low_latency;
4130                 break;
4131         case low_latency:  /* 50 usec aka 20000 ints/s */
4132                 if (bytes > 10000) {
4133                         /* this if handles the TSO accounting */
4134                         if (bytes/packets > 8000) {
4135                                 itrval = bulk_latency;
4136                         } else if ((packets < 10) || ((bytes/packets) > 1200)) {
4137                                 itrval = bulk_latency;
4138                         } else if ((packets > 35)) {
4139                                 itrval = lowest_latency;
4140                         }
4141                 } else if (bytes/packets > 2000) {
4142                         itrval = bulk_latency;
4143                 } else if (packets <= 2 && bytes < 512) {
4144                         itrval = lowest_latency;
4145                 }
4146                 break;
4147         case bulk_latency: /* 250 usec aka 4000 ints/s */
4148                 if (bytes > 25000) {
4149                         if (packets > 35)
4150                                 itrval = low_latency;
4151                 } else if (bytes < 1500) {
4152                         itrval = low_latency;
4153                 }
4154                 break;
4155         }
4156
4157         /* clear work counters since we have the values we need */
4158         ring_container->total_bytes = 0;
4159         ring_container->total_packets = 0;
4160
4161         /* write updated itr to ring container */
4162         ring_container->itr = itrval;
4163 }
4164
4165 static void igb_set_itr(struct igb_q_vector *q_vector)
4166 {
4167         struct igb_adapter *adapter = q_vector->adapter;
4168         u32 new_itr = q_vector->itr_val;
4169         u8 current_itr = 0;
4170
4171         /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
4172         if (adapter->link_speed != SPEED_1000) {
4173                 current_itr = 0;
4174                 new_itr = IGB_4K_ITR;
4175                 goto set_itr_now;
4176         }
4177
4178         igb_update_itr(q_vector, &q_vector->tx);
4179         igb_update_itr(q_vector, &q_vector->rx);
4180
4181         current_itr = max(q_vector->rx.itr, q_vector->tx.itr);
4182
4183         /* conservative mode (itr 3) eliminates the lowest_latency setting */
4184         if (current_itr == lowest_latency &&
4185             ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
4186              (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
4187                 current_itr = low_latency;
4188
4189         switch (current_itr) {
4190         /* counts and packets in update_itr are dependent on these numbers */
4191         case lowest_latency:
4192                 new_itr = IGB_70K_ITR; /* 70,000 ints/sec */
4193                 break;
4194         case low_latency:
4195                 new_itr = IGB_20K_ITR; /* 20,000 ints/sec */
4196                 break;
4197         case bulk_latency:
4198                 new_itr = IGB_4K_ITR;  /* 4,000 ints/sec */
4199                 break;
4200         default:
4201                 break;
4202         }
4203
4204 set_itr_now:
4205         if (new_itr != q_vector->itr_val) {
4206                 /* this attempts to bias the interrupt rate towards Bulk
4207                  * by adding intermediate steps when interrupt rate is
4208                  * increasing */
4209                 new_itr = new_itr > q_vector->itr_val ?
4210                              max((new_itr * q_vector->itr_val) /
4211                                  (new_itr + (q_vector->itr_val >> 2)),
4212                                  new_itr) :
4213                              new_itr;
4214                 /* Don't write the value here; it resets the adapter's
4215                  * internal timer, and causes us to delay far longer than
4216                  * we should between interrupts.  Instead, we write the ITR
4217                  * value at the beginning of the next interrupt so the timing
4218                  * ends up being correct.
4219                  */
4220                 q_vector->itr_val = new_itr;
4221                 q_vector->set_itr = 1;
4222         }
4223 }
4224
4225 static void igb_tx_ctxtdesc(struct igb_ring *tx_ring, u32 vlan_macip_lens,
4226                             u32 type_tucmd, u32 mss_l4len_idx)
4227 {
4228         struct e1000_adv_tx_context_desc *context_desc;
4229         u16 i = tx_ring->next_to_use;
4230
4231         context_desc = IGB_TX_CTXTDESC(tx_ring, i);
4232
4233         i++;
4234         tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
4235
4236         /* set bits to identify this as an advanced context descriptor */
4237         type_tucmd |= E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT;
4238
4239         /* For 82575, context index must be unique per ring. */
4240         if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
4241                 mss_l4len_idx |= tx_ring->reg_idx << 4;
4242
4243         context_desc->vlan_macip_lens   = cpu_to_le32(vlan_macip_lens);
4244         context_desc->seqnum_seed       = 0;
4245         context_desc->type_tucmd_mlhl   = cpu_to_le32(type_tucmd);
4246         context_desc->mss_l4len_idx     = cpu_to_le32(mss_l4len_idx);
4247 }
4248
4249 static int igb_tso(struct igb_ring *tx_ring,
4250                    struct igb_tx_buffer *first,
4251                    u8 *hdr_len)
4252 {
4253         struct sk_buff *skb = first->skb;
4254         u32 vlan_macip_lens, type_tucmd;
4255         u32 mss_l4len_idx, l4len;
4256
4257         if (skb->ip_summed != CHECKSUM_PARTIAL)
4258                 return 0;
4259
4260         if (!skb_is_gso(skb))
4261                 return 0;
4262
4263         if (skb_header_cloned(skb)) {
4264                 int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
4265                 if (err)
4266                         return err;
4267         }
4268
4269         /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
4270         type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP;
4271
4272         if (first->protocol == __constant_htons(ETH_P_IP)) {
4273                 struct iphdr *iph = ip_hdr(skb);
4274                 iph->tot_len = 0;
4275                 iph->check = 0;
4276                 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
4277                                                          iph->daddr, 0,
4278                                                          IPPROTO_TCP,
4279                                                          0);
4280                 type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
4281                 first->tx_flags |= IGB_TX_FLAGS_TSO |
4282                                    IGB_TX_FLAGS_CSUM |
4283                                    IGB_TX_FLAGS_IPV4;
4284         } else if (skb_is_gso_v6(skb)) {
4285                 ipv6_hdr(skb)->payload_len = 0;
4286                 tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
4287                                                        &ipv6_hdr(skb)->daddr,
4288                                                        0, IPPROTO_TCP, 0);
4289                 first->tx_flags |= IGB_TX_FLAGS_TSO |
4290                                    IGB_TX_FLAGS_CSUM;
4291         }
4292
4293         /* compute header lengths */
4294         l4len = tcp_hdrlen(skb);
4295         *hdr_len = skb_transport_offset(skb) + l4len;
4296
4297         /* update gso size and bytecount with header size */
4298         first->gso_segs = skb_shinfo(skb)->gso_segs;
4299         first->bytecount += (first->gso_segs - 1) * *hdr_len;
4300
4301         /* MSS L4LEN IDX */
4302         mss_l4len_idx = l4len << E1000_ADVTXD_L4LEN_SHIFT;
4303         mss_l4len_idx |= skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT;
4304
4305         /* VLAN MACLEN IPLEN */
4306         vlan_macip_lens = skb_network_header_len(skb);
4307         vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
4308         vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
4309
4310         igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx);
4311
4312         return 1;
4313 }
4314
4315 static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first)
4316 {
4317         struct sk_buff *skb = first->skb;
4318         u32 vlan_macip_lens = 0;
4319         u32 mss_l4len_idx = 0;
4320         u32 type_tucmd = 0;
4321
4322         if (skb->ip_summed != CHECKSUM_PARTIAL) {
4323                 if (!(first->tx_flags & IGB_TX_FLAGS_VLAN))
4324                         return;
4325         } else {
4326                 u8 l4_hdr = 0;
4327                 switch (first->protocol) {
4328                 case __constant_htons(ETH_P_IP):
4329                         vlan_macip_lens |= skb_network_header_len(skb);
4330                         type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
4331                         l4_hdr = ip_hdr(skb)->protocol;
4332                         break;
4333                 case __constant_htons(ETH_P_IPV6):
4334                         vlan_macip_lens |= skb_network_header_len(skb);
4335                         l4_hdr = ipv6_hdr(skb)->nexthdr;
4336                         break;
4337                 default:
4338                         if (unlikely(net_ratelimit())) {
4339                                 dev_warn(tx_ring->dev,
4340                                  "partial checksum but proto=%x!\n",
4341                                  first->protocol);
4342                         }
4343                         break;
4344                 }
4345
4346                 switch (l4_hdr) {
4347                 case IPPROTO_TCP:
4348                         type_tucmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
4349                         mss_l4len_idx = tcp_hdrlen(skb) <<
4350                                         E1000_ADVTXD_L4LEN_SHIFT;
4351                         break;
4352                 case IPPROTO_SCTP:
4353                         type_tucmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
4354                         mss_l4len_idx = sizeof(struct sctphdr) <<
4355                                         E1000_ADVTXD_L4LEN_SHIFT;
4356                         break;
4357                 case IPPROTO_UDP:
4358                         mss_l4len_idx = sizeof(struct udphdr) <<
4359                                         E1000_ADVTXD_L4LEN_SHIFT;
4360                         break;
4361                 default:
4362                         if (unlikely(net_ratelimit())) {
4363                                 dev_warn(tx_ring->dev,
4364                                  "partial checksum but l4 proto=%x!\n",
4365                                  l4_hdr);
4366                         }
4367                         break;
4368                 }
4369
4370                 /* update TX checksum flag */
4371                 first->tx_flags |= IGB_TX_FLAGS_CSUM;
4372         }
4373
4374         vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
4375         vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
4376
4377         igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx);
4378 }
4379
4380 #define IGB_SET_FLAG(_input, _flag, _result) \
4381         ((_flag <= _result) ? \
4382          ((u32)(_input & _flag) * (_result / _flag)) : \
4383          ((u32)(_input & _flag) / (_flag / _result)))
4384
4385 static u32 igb_tx_cmd_type(struct sk_buff *skb, u32 tx_flags)
4386 {
4387         /* set type for advanced descriptor with frame checksum insertion */
4388         u32 cmd_type = E1000_ADVTXD_DTYP_DATA |
4389                        E1000_ADVTXD_DCMD_DEXT |
4390                        E1000_ADVTXD_DCMD_IFCS;
4391
4392         /* set HW vlan bit if vlan is present */
4393         cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_VLAN,
4394                                  (E1000_ADVTXD_DCMD_VLE));
4395
4396         /* set segmentation bits for TSO */
4397         cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSO,
4398                                  (E1000_ADVTXD_DCMD_TSE));
4399
4400         /* set timestamp bit if present */
4401         cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSTAMP,
4402                                  (E1000_ADVTXD_MAC_TSTAMP));
4403
4404         /* insert frame checksum */
4405         cmd_type ^= IGB_SET_FLAG(skb->no_fcs, 1, E1000_ADVTXD_DCMD_IFCS);
4406
4407         return cmd_type;
4408 }
4409
4410 static void igb_tx_olinfo_status(struct igb_ring *tx_ring,
4411                                  union e1000_adv_tx_desc *tx_desc,
4412                                  u32 tx_flags, unsigned int paylen)
4413 {
4414         u32 olinfo_status = paylen << E1000_ADVTXD_PAYLEN_SHIFT;
4415
4416         /* 82575 requires a unique index per ring */
4417         if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
4418                 olinfo_status |= tx_ring->reg_idx << 4;
4419
4420         /* insert L4 checksum */
4421         olinfo_status |= IGB_SET_FLAG(tx_flags,
4422                                       IGB_TX_FLAGS_CSUM,
4423                                       (E1000_TXD_POPTS_TXSM << 8));
4424
4425         /* insert IPv4 checksum */
4426         olinfo_status |= IGB_SET_FLAG(tx_flags,
4427                                       IGB_TX_FLAGS_IPV4,
4428                                       (E1000_TXD_POPTS_IXSM << 8));
4429
4430         tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
4431 }
4432
4433 static void igb_tx_map(struct igb_ring *tx_ring,
4434                        struct igb_tx_buffer *first,
4435                        const u8 hdr_len)
4436 {
4437         struct sk_buff *skb = first->skb;
4438         struct igb_tx_buffer *tx_buffer;
4439         union e1000_adv_tx_desc *tx_desc;
4440         struct skb_frag_struct *frag;
4441         dma_addr_t dma;
4442         unsigned int data_len, size;
4443         u32 tx_flags = first->tx_flags;
4444         u32 cmd_type = igb_tx_cmd_type(skb, tx_flags);
4445         u16 i = tx_ring->next_to_use;
4446
4447         tx_desc = IGB_TX_DESC(tx_ring, i);
4448
4449         igb_tx_olinfo_status(tx_ring, tx_desc, tx_flags, skb->len - hdr_len);
4450
4451         size = skb_headlen(skb);
4452         data_len = skb->data_len;
4453
4454         dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
4455
4456         tx_buffer = first;
4457
4458         for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
4459                 if (dma_mapping_error(tx_ring->dev, dma))
4460                         goto dma_error;
4461
4462                 /* record length, and DMA address */
4463                 dma_unmap_len_set(tx_buffer, len, size);
4464                 dma_unmap_addr_set(tx_buffer, dma, dma);
4465
4466                 tx_desc->read.buffer_addr = cpu_to_le64(dma);
4467
4468                 while (unlikely(size > IGB_MAX_DATA_PER_TXD)) {
4469                         tx_desc->read.cmd_type_len =
4470                                 cpu_to_le32(cmd_type ^ IGB_MAX_DATA_PER_TXD);
4471
4472                         i++;
4473                         tx_desc++;
4474                         if (i == tx_ring->count) {
4475                                 tx_desc = IGB_TX_DESC(tx_ring, 0);
4476                                 i = 0;
4477                         }
4478                         tx_desc->read.olinfo_status = 0;
4479
4480                         dma += IGB_MAX_DATA_PER_TXD;
4481                         size -= IGB_MAX_DATA_PER_TXD;
4482
4483                         tx_desc->read.buffer_addr = cpu_to_le64(dma);
4484                 }
4485
4486                 if (likely(!data_len))
4487                         break;
4488
4489                 tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size);
4490
4491                 i++;
4492                 tx_desc++;
4493                 if (i == tx_ring->count) {
4494                         tx_desc = IGB_TX_DESC(tx_ring, 0);
4495                         i = 0;
4496                 }
4497                 tx_desc->read.olinfo_status = 0;
4498
4499                 size = skb_frag_size(frag);
4500                 data_len -= size;
4501
4502                 dma = skb_frag_dma_map(tx_ring->dev, frag, 0,
4503                                        size, DMA_TO_DEVICE);
4504
4505                 tx_buffer = &tx_ring->tx_buffer_info[i];
4506         }
4507
4508         /* write last descriptor with RS and EOP bits */
4509         cmd_type |= size | IGB_TXD_DCMD;
4510         tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type);
4511
4512         netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
4513
4514         /* set the timestamp */
4515         first->time_stamp = jiffies;
4516
4517         /*
4518          * Force memory writes to complete before letting h/w know there
4519          * are new descriptors to fetch.  (Only applicable for weak-ordered
4520          * memory model archs, such as IA-64).
4521          *
4522          * We also need this memory barrier to make certain all of the
4523          * status bits have been updated before next_to_watch is written.
4524          */
4525         wmb();
4526
4527         /* set next_to_watch value indicating a packet is present */
4528         first->next_to_watch = tx_desc;
4529
4530         i++;
4531         if (i == tx_ring->count)
4532                 i = 0;
4533
4534         tx_ring->next_to_use = i;
4535
4536         writel(i, tx_ring->tail);
4537
4538         /* we need this if more than one processor can write to our tail
4539          * at a time, it syncronizes IO on IA64/Altix systems */
4540         mmiowb();
4541
4542         return;
4543
4544 dma_error:
4545         dev_err(tx_ring->dev, "TX DMA map failed\n");
4546
4547         /* clear dma mappings for failed tx_buffer_info map */
4548         for (;;) {
4549                 tx_buffer = &tx_ring->tx_buffer_info[i];
4550                 igb_unmap_and_free_tx_resource(tx_ring, tx_buffer);
4551                 if (tx_buffer == first)
4552                         break;
4553                 if (i == 0)
4554                         i = tx_ring->count;
4555                 i--;
4556         }
4557
4558         tx_ring->next_to_use = i;
4559 }
4560
4561 static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
4562 {
4563         struct net_device *netdev = tx_ring->netdev;
4564
4565         netif_stop_subqueue(netdev, tx_ring->queue_index);
4566
4567         /* Herbert's original patch had:
4568          *  smp_mb__after_netif_stop_queue();
4569          * but since that doesn't exist yet, just open code it. */
4570         smp_mb();
4571
4572         /* We need to check again in a case another CPU has just
4573          * made room available. */
4574         if (igb_desc_unused(tx_ring) < size)
4575                 return -EBUSY;
4576
4577         /* A reprieve! */
4578         netif_wake_subqueue(netdev, tx_ring->queue_index);
4579
4580         u64_stats_update_begin(&tx_ring->tx_syncp2);
4581         tx_ring->tx_stats.restart_queue2++;
4582         u64_stats_update_end(&tx_ring->tx_syncp2);
4583
4584         return 0;
4585 }
4586
4587 static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
4588 {
4589         if (igb_desc_unused(tx_ring) >= size)
4590                 return 0;
4591         return __igb_maybe_stop_tx(tx_ring, size);
4592 }
4593
4594 netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
4595                                 struct igb_ring *tx_ring)
4596 {
4597         struct igb_adapter *adapter = netdev_priv(tx_ring->netdev);
4598         struct igb_tx_buffer *first;
4599         int tso;
4600         u32 tx_flags = 0;
4601         u16 count = TXD_USE_COUNT(skb_headlen(skb));
4602         __be16 protocol = vlan_get_protocol(skb);
4603         u8 hdr_len = 0;
4604
4605         /* need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD,
4606          *       + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD,
4607          *       + 2 desc gap to keep tail from touching head,
4608          *       + 1 desc for context descriptor,
4609          * otherwise try next time
4610          */
4611         if (NETDEV_FRAG_PAGE_MAX_SIZE > IGB_MAX_DATA_PER_TXD) {
4612                 unsigned short f;
4613                 for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
4614                         count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
4615         } else {
4616                 count += skb_shinfo(skb)->nr_frags;
4617         }
4618
4619         if (igb_maybe_stop_tx(tx_ring, count + 3)) {
4620                 /* this is a hard error */
4621                 return NETDEV_TX_BUSY;
4622         }
4623
4624         /* record the location of the first descriptor for this packet */
4625         first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
4626         first->skb = skb;
4627         first->bytecount = skb->len;
4628         first->gso_segs = 1;
4629
4630         skb_tx_timestamp(skb);
4631
4632         if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
4633                      !(adapter->ptp_tx_skb))) {
4634                 skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
4635                 tx_flags |= IGB_TX_FLAGS_TSTAMP;
4636
4637                 adapter->ptp_tx_skb = skb_get(skb);
4638                 adapter->ptp_tx_start = jiffies;
4639                 if (adapter->hw.mac.type == e1000_82576)
4640                         schedule_work(&adapter->ptp_tx_work);
4641         }
4642
4643         if (vlan_tx_tag_present(skb)) {
4644                 tx_flags |= IGB_TX_FLAGS_VLAN;
4645                 tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
4646         }
4647
4648         /* record initial flags and protocol */
4649         first->tx_flags = tx_flags;
4650         first->protocol = protocol;
4651
4652         tso = igb_tso(tx_ring, first, &hdr_len);
4653         if (tso < 0)
4654                 goto out_drop;
4655         else if (!tso)
4656                 igb_tx_csum(tx_ring, first);
4657
4658         igb_tx_map(tx_ring, first, hdr_len);
4659
4660         /* Make sure there is space in the ring for the next send. */
4661         igb_maybe_stop_tx(tx_ring, DESC_NEEDED);
4662
4663         return NETDEV_TX_OK;
4664
4665 out_drop:
4666         igb_unmap_and_free_tx_resource(tx_ring, first);
4667
4668         return NETDEV_TX_OK;
4669 }
4670
4671 static inline struct igb_ring *igb_tx_queue_mapping(struct igb_adapter *adapter,
4672                                                     struct sk_buff *skb)
4673 {
4674         unsigned int r_idx = skb->queue_mapping;
4675
4676         if (r_idx >= adapter->num_tx_queues)
4677                 r_idx = r_idx % adapter->num_tx_queues;
4678
4679         return adapter->tx_ring[r_idx];
4680 }
4681
4682 static netdev_tx_t igb_xmit_frame(struct sk_buff *skb,
4683                                   struct net_device *netdev)
4684 {
4685         struct igb_adapter *adapter = netdev_priv(netdev);
4686
4687         if (test_bit(__IGB_DOWN, &adapter->state)) {
4688                 dev_kfree_skb_any(skb);
4689                 return NETDEV_TX_OK;
4690         }
4691
4692         if (skb->len <= 0) {
4693                 dev_kfree_skb_any(skb);
4694                 return NETDEV_TX_OK;
4695         }
4696
4697         /*
4698          * The minimum packet size with TCTL.PSP set is 17 so pad the skb
4699          * in order to meet this minimum size requirement.
4700          */
4701         if (unlikely(skb->len < 17)) {
4702                 if (skb_pad(skb, 17 - skb->len))
4703                         return NETDEV_TX_OK;
4704                 skb->len = 17;
4705                 skb_set_tail_pointer(skb, 17);
4706         }
4707
4708         return igb_xmit_frame_ring(skb, igb_tx_queue_mapping(adapter, skb));
4709 }
4710
4711 /**
4712  * igb_tx_timeout - Respond to a Tx Hang
4713  * @netdev: network interface device structure
4714  **/
4715 static void igb_tx_timeout(struct net_device *netdev)
4716 {
4717         struct igb_adapter *adapter = netdev_priv(netdev);
4718         struct e1000_hw *hw = &adapter->hw;
4719
4720         /* Do the reset outside of interrupt context */
4721         adapter->tx_timeout_count++;
4722
4723         if (hw->mac.type >= e1000_82580)
4724                 hw->dev_spec._82575.global_device_reset = true;
4725
4726         schedule_work(&adapter->reset_task);
4727         wr32(E1000_EICS,
4728              (adapter->eims_enable_mask & ~adapter->eims_other));
4729 }
4730
4731 static void igb_reset_task(struct work_struct *work)
4732 {
4733         struct igb_adapter *adapter;
4734         adapter = container_of(work, struct igb_adapter, reset_task);
4735
4736         igb_dump(adapter);
4737         netdev_err(adapter->netdev, "Reset adapter\n");
4738         igb_reinit_locked(adapter);
4739 }
4740
4741 /**
4742  * igb_get_stats64 - Get System Network Statistics
4743  * @netdev: network interface device structure
4744  * @stats: rtnl_link_stats64 pointer
4745  *
4746  **/
4747 static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *netdev,
4748                                                  struct rtnl_link_stats64 *stats)
4749 {
4750         struct igb_adapter *adapter = netdev_priv(netdev);
4751
4752         spin_lock(&adapter->stats64_lock);
4753         igb_update_stats(adapter, &adapter->stats64);
4754         memcpy(stats, &adapter->stats64, sizeof(*stats));
4755         spin_unlock(&adapter->stats64_lock);
4756
4757         return stats;
4758 }
4759
4760 /**
4761  * igb_change_mtu - Change the Maximum Transfer Unit
4762  * @netdev: network interface device structure
4763  * @new_mtu: new value for maximum frame size
4764  *
4765  * Returns 0 on success, negative on failure
4766  **/
4767 static int igb_change_mtu(struct net_device *netdev, int new_mtu)
4768 {
4769         struct igb_adapter *adapter = netdev_priv(netdev);
4770         struct pci_dev *pdev = adapter->pdev;
4771         int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
4772
4773         if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
4774                 dev_err(&pdev->dev, "Invalid MTU setting\n");
4775                 return -EINVAL;
4776         }
4777
4778 #define MAX_STD_JUMBO_FRAME_SIZE 9238
4779         if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
4780                 dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
4781                 return -EINVAL;
4782         }
4783
4784         while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
4785                 msleep(1);
4786
4787         /* igb_down has a dependency on max_frame_size */
4788         adapter->max_frame_size = max_frame;
4789
4790         if (netif_running(netdev))
4791                 igb_down(adapter);
4792
4793         dev_info(&pdev->dev, "changing MTU from %d to %d\n",
4794                  netdev->mtu, new_mtu);
4795         netdev->mtu = new_mtu;
4796
4797         if (netif_running(netdev))
4798                 igb_up(adapter);
4799         else
4800                 igb_reset(adapter);
4801
4802         clear_bit(__IGB_RESETTING, &adapter->state);
4803
4804         return 0;
4805 }
4806
4807 /**
4808  * igb_update_stats - Update the board statistics counters
4809  * @adapter: board private structure
4810  **/
4811
4812 void igb_update_stats(struct igb_adapter *adapter,
4813                       struct rtnl_link_stats64 *net_stats)
4814 {
4815         struct e1000_hw *hw = &adapter->hw;
4816         struct pci_dev *pdev = adapter->pdev;
4817         u32 reg, mpc;
4818         u16 phy_tmp;
4819         int i;
4820         u64 bytes, packets;
4821         unsigned int start;
4822         u64 _bytes, _packets;
4823
4824 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
4825
4826         /*
4827          * Prevent stats update while adapter is being reset, or if the pci
4828          * connection is down.
4829          */
4830         if (adapter->link_speed == 0)
4831                 return;
4832         if (pci_channel_offline(pdev))
4833                 return;
4834
4835         bytes = 0;
4836         packets = 0;
4837         for (i = 0; i < adapter->num_rx_queues; i++) {
4838                 u32 rqdpc = rd32(E1000_RQDPC(i));
4839                 struct igb_ring *ring = adapter->rx_ring[i];
4840
4841                 if (rqdpc) {
4842                         ring->rx_stats.drops += rqdpc;
4843                         net_stats->rx_fifo_errors += rqdpc;
4844                 }
4845
4846                 do {
4847                         start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
4848                         _bytes = ring->rx_stats.bytes;
4849                         _packets = ring->rx_stats.packets;
4850                 } while (u64_stats_fetch_retry_bh(&ring->rx_syncp, start));
4851                 bytes += _bytes;
4852                 packets += _packets;
4853         }
4854
4855         net_stats->rx_bytes = bytes;
4856         net_stats->rx_packets = packets;
4857
4858         bytes = 0;
4859         packets = 0;
4860         for (i = 0; i < adapter->num_tx_queues; i++) {
4861                 struct igb_ring *ring = adapter->tx_ring[i];
4862                 do {
4863                         start = u64_stats_fetch_begin_bh(&ring->tx_syncp);
4864                         _bytes = ring->tx_stats.bytes;
4865                         _packets = ring->tx_stats.packets;
4866                 } while (u64_stats_fetch_retry_bh(&ring->tx_syncp, start));
4867                 bytes += _bytes;
4868                 packets += _packets;
4869         }
4870         net_stats->tx_bytes = bytes;
4871         net_stats->tx_packets = packets;
4872
4873         /* read stats registers */
4874         adapter->stats.crcerrs += rd32(E1000_CRCERRS);
4875         adapter->stats.gprc += rd32(E1000_GPRC);
4876         adapter->stats.gorc += rd32(E1000_GORCL);
4877         rd32(E1000_GORCH); /* clear GORCL */
4878         adapter->stats.bprc += rd32(E1000_BPRC);
4879         adapter->stats.mprc += rd32(E1000_MPRC);
4880         adapter->stats.roc += rd32(E1000_ROC);
4881
4882         adapter->stats.prc64 += rd32(E1000_PRC64);
4883         adapter->stats.prc127 += rd32(E1000_PRC127);
4884         adapter->stats.prc255 += rd32(E1000_PRC255);
4885         adapter->stats.prc511 += rd32(E1000_PRC511);
4886         adapter->stats.prc1023 += rd32(E1000_PRC1023);
4887         adapter->stats.prc1522 += rd32(E1000_PRC1522);
4888         adapter->stats.symerrs += rd32(E1000_SYMERRS);
4889         adapter->stats.sec += rd32(E1000_SEC);
4890
4891         mpc = rd32(E1000_MPC);
4892         adapter->stats.mpc += mpc;
4893         net_stats->rx_fifo_errors += mpc;
4894         adapter->stats.scc += rd32(E1000_SCC);
4895         adapter->stats.ecol += rd32(E1000_ECOL);
4896         adapter->stats.mcc += rd32(E1000_MCC);
4897         adapter->stats.latecol += rd32(E1000_LATECOL);
4898         adapter->stats.dc += rd32(E1000_DC);
4899         adapter->stats.rlec += rd32(E1000_RLEC);
4900         adapter->stats.xonrxc += rd32(E1000_XONRXC);
4901         adapter->stats.xontxc += rd32(E1000_XONTXC);
4902         adapter->stats.xoffrxc += rd32(E1000_XOFFRXC);
4903         adapter->stats.xofftxc += rd32(E1000_XOFFTXC);
4904         adapter->stats.fcruc += rd32(E1000_FCRUC);
4905         adapter->stats.gptc += rd32(E1000_GPTC);
4906         adapter->stats.gotc += rd32(E1000_GOTCL);
4907         rd32(E1000_GOTCH); /* clear GOTCL */
4908         adapter->stats.rnbc += rd32(E1000_RNBC);
4909         adapter->stats.ruc += rd32(E1000_RUC);
4910         adapter->stats.rfc += rd32(E1000_RFC);
4911         adapter->stats.rjc += rd32(E1000_RJC);
4912         adapter->stats.tor += rd32(E1000_TORH);
4913         adapter->stats.tot += rd32(E1000_TOTH);
4914         adapter->stats.tpr += rd32(E1000_TPR);
4915
4916         adapter->stats.ptc64 += rd32(E1000_PTC64);
4917         adapter->stats.ptc127 += rd32(E1000_PTC127);
4918         adapter->stats.ptc255 += rd32(E1000_PTC255);
4919         adapter->stats.ptc511 += rd32(E1000_PTC511);
4920         adapter->stats.ptc1023 += rd32(E1000_PTC1023);
4921         adapter->stats.ptc1522 += rd32(E1000_PTC1522);
4922
4923         adapter->stats.mptc += rd32(E1000_MPTC);
4924         adapter->stats.bptc += rd32(E1000_BPTC);
4925
4926         adapter->stats.tpt += rd32(E1000_TPT);
4927         adapter->stats.colc += rd32(E1000_COLC);
4928
4929         adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
4930         /* read internal phy specific stats */
4931         reg = rd32(E1000_CTRL_EXT);
4932         if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) {
4933                 adapter->stats.rxerrc += rd32(E1000_RXERRC);
4934
4935                 /* this stat has invalid values on i210/i211 */
4936                 if ((hw->mac.type != e1000_i210) &&
4937                     (hw->mac.type != e1000_i211))
4938                         adapter->stats.tncrs += rd32(E1000_TNCRS);
4939         }
4940
4941         adapter->stats.tsctc += rd32(E1000_TSCTC);
4942         adapter->stats.tsctfc += rd32(E1000_TSCTFC);
4943
4944         adapter->stats.iac += rd32(E1000_IAC);
4945         adapter->stats.icrxoc += rd32(E1000_ICRXOC);
4946         adapter->stats.icrxptc += rd32(E1000_ICRXPTC);
4947         adapter->stats.icrxatc += rd32(E1000_ICRXATC);
4948         adapter->stats.ictxptc += rd32(E1000_ICTXPTC);
4949         adapter->stats.ictxatc += rd32(E1000_ICTXATC);
4950         adapter->stats.ictxqec += rd32(E1000_ICTXQEC);
4951         adapter->stats.ictxqmtc += rd32(E1000_ICTXQMTC);
4952         adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
4953
4954         /* Fill out the OS statistics structure */
4955         net_stats->multicast = adapter->stats.mprc;
4956         net_stats->collisions = adapter->stats.colc;
4957
4958         /* Rx Errors */
4959
4960         /* RLEC on some newer hardware can be incorrect so build
4961          * our own version based on RUC and ROC */
4962         net_stats->rx_errors = adapter->stats.rxerrc +
4963                 adapter->stats.crcerrs + adapter->stats.algnerrc +
4964                 adapter->stats.ruc + adapter->stats.roc +
4965                 adapter->stats.cexterr;
4966         net_stats->rx_length_errors = adapter->stats.ruc +
4967                                       adapter->stats.roc;
4968         net_stats->rx_crc_errors = adapter->stats.crcerrs;
4969         net_stats->rx_frame_errors = adapter->stats.algnerrc;
4970         net_stats->rx_missed_errors = adapter->stats.mpc;
4971
4972         /* Tx Errors */
4973         net_stats->tx_errors = adapter->stats.ecol +
4974                                adapter->stats.latecol;
4975         net_stats->tx_aborted_errors = adapter->stats.ecol;
4976         net_stats->tx_window_errors = adapter->stats.latecol;
4977         net_stats->tx_carrier_errors = adapter->stats.tncrs;
4978
4979         /* Tx Dropped needs to be maintained elsewhere */
4980
4981         /* Phy Stats */
4982         if (hw->phy.media_type == e1000_media_type_copper) {
4983                 if ((adapter->link_speed == SPEED_1000) &&
4984                    (!igb_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
4985                         phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
4986                         adapter->phy_stats.idle_errors += phy_tmp;
4987                 }
4988         }
4989
4990         /* Management Stats */
4991         adapter->stats.mgptc += rd32(E1000_MGTPTC);
4992         adapter->stats.mgprc += rd32(E1000_MGTPRC);
4993         adapter->stats.mgpdc += rd32(E1000_MGTPDC);
4994
4995         /* OS2BMC Stats */
4996         reg = rd32(E1000_MANC);
4997         if (reg & E1000_MANC_EN_BMC2OS) {
4998                 adapter->stats.o2bgptc += rd32(E1000_O2BGPTC);
4999                 adapter->stats.o2bspc += rd32(E1000_O2BSPC);
5000                 adapter->stats.b2ospc += rd32(E1000_B2OSPC);
5001                 adapter->stats.b2ogprc += rd32(E1000_B2OGPRC);
5002         }
5003 }
5004
5005 static irqreturn_t igb_msix_other(int irq, void *data)
5006 {
5007         struct igb_adapter *adapter = data;
5008         struct e1000_hw *hw = &adapter->hw;
5009         u32 icr = rd32(E1000_ICR);
5010         /* reading ICR causes bit 31 of EICR to be cleared */
5011
5012         if (icr & E1000_ICR_DRSTA)
5013                 schedule_work(&adapter->reset_task);
5014
5015         if (icr & E1000_ICR_DOUTSYNC) {
5016                 /* HW is reporting DMA is out of sync */
5017                 adapter->stats.doosync++;
5018                 /* The DMA Out of Sync is also indication of a spoof event
5019                  * in IOV mode. Check the Wrong VM Behavior register to
5020                  * see if it is really a spoof event. */
5021                 igb_check_wvbr(adapter);
5022         }
5023
5024         /* Check for a mailbox event */
5025         if (icr & E1000_ICR_VMMB)
5026                 igb_msg_task(adapter);
5027
5028         if (icr & E1000_ICR_LSC) {
5029                 hw->mac.get_link_status = 1;
5030                 /* guard against interrupt when we're going down */
5031                 if (!test_bit(__IGB_DOWN, &adapter->state))
5032                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
5033         }
5034
5035         if (icr & E1000_ICR_TS) {
5036                 u32 tsicr = rd32(E1000_TSICR);
5037
5038                 if (tsicr & E1000_TSICR_TXTS) {
5039                         /* acknowledge the interrupt */
5040                         wr32(E1000_TSICR, E1000_TSICR_TXTS);
5041                         /* retrieve hardware timestamp */
5042                         schedule_work(&adapter->ptp_tx_work);
5043                 }
5044         }
5045
5046         wr32(E1000_EIMS, adapter->eims_other);
5047
5048         return IRQ_HANDLED;
5049 }
5050
5051 static void igb_write_itr(struct igb_q_vector *q_vector)
5052 {
5053         struct igb_adapter *adapter = q_vector->adapter;
5054         u32 itr_val = q_vector->itr_val & 0x7FFC;
5055
5056         if (!q_vector->set_itr)
5057                 return;
5058
5059         if (!itr_val)
5060                 itr_val = 0x4;
5061
5062         if (adapter->hw.mac.type == e1000_82575)
5063                 itr_val |= itr_val << 16;
5064         else
5065                 itr_val |= E1000_EITR_CNT_IGNR;
5066
5067         writel(itr_val, q_vector->itr_register);
5068         q_vector->set_itr = 0;
5069 }
5070
5071 static irqreturn_t igb_msix_ring(int irq, void *data)
5072 {
5073         struct igb_q_vector *q_vector = data;
5074
5075         /* Write the ITR value calculated from the previous interrupt. */
5076         igb_write_itr(q_vector);
5077
5078         napi_schedule(&q_vector->napi);
5079
5080         return IRQ_HANDLED;
5081 }
5082
5083 #ifdef CONFIG_IGB_DCA
5084 static void igb_update_tx_dca(struct igb_adapter *adapter,
5085                               struct igb_ring *tx_ring,
5086                               int cpu)
5087 {
5088         struct e1000_hw *hw = &adapter->hw;
5089         u32 txctrl = dca3_get_tag(tx_ring->dev, cpu);
5090
5091         if (hw->mac.type != e1000_82575)
5092                 txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT;
5093
5094         /*
5095          * We can enable relaxed ordering for reads, but not writes when
5096          * DCA is enabled.  This is due to a known issue in some chipsets
5097          * which will cause the DCA tag to be cleared.
5098          */
5099         txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN |
5100                   E1000_DCA_TXCTRL_DATA_RRO_EN |
5101                   E1000_DCA_TXCTRL_DESC_DCA_EN;
5102
5103         wr32(E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl);
5104 }
5105
5106 static void igb_update_rx_dca(struct igb_adapter *adapter,
5107                               struct igb_ring *rx_ring,
5108                               int cpu)
5109 {
5110         struct e1000_hw *hw = &adapter->hw;
5111         u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu);
5112
5113         if (hw->mac.type != e1000_82575)
5114                 rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT;
5115
5116         /*
5117          * We can enable relaxed ordering for reads, but not writes when
5118          * DCA is enabled.  This is due to a known issue in some chipsets
5119          * which will cause the DCA tag to be cleared.
5120          */
5121         rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN |
5122                   E1000_DCA_RXCTRL_DESC_DCA_EN;
5123
5124         wr32(E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl);
5125 }
5126
5127 static void igb_update_dca(struct igb_q_vector *q_vector)
5128 {
5129         struct igb_adapter *adapter = q_vector->adapter;
5130         int cpu = get_cpu();
5131
5132         if (q_vector->cpu == cpu)
5133                 goto out_no_update;
5134
5135         if (q_vector->tx.ring)
5136                 igb_update_tx_dca(adapter, q_vector->tx.ring, cpu);
5137
5138         if (q_vector->rx.ring)
5139                 igb_update_rx_dca(adapter, q_vector->rx.ring, cpu);
5140
5141         q_vector->cpu = cpu;
5142 out_no_update:
5143         put_cpu();
5144 }
5145
5146 static void igb_setup_dca(struct igb_adapter *adapter)
5147 {
5148         struct e1000_hw *hw = &adapter->hw;
5149         int i;
5150
5151         if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
5152                 return;
5153
5154         /* Always use CB2 mode, difference is masked in the CB driver. */
5155         wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
5156
5157         for (i = 0; i < adapter->num_q_vectors; i++) {
5158                 adapter->q_vector[i]->cpu = -1;
5159                 igb_update_dca(adapter->q_vector[i]);
5160         }
5161 }
5162
5163 static int __igb_notify_dca(struct device *dev, void *data)
5164 {
5165         struct net_device *netdev = dev_get_drvdata(dev);
5166         struct igb_adapter *adapter = netdev_priv(netdev);
5167         struct pci_dev *pdev = adapter->pdev;
5168         struct e1000_hw *hw = &adapter->hw;
5169         unsigned long event = *(unsigned long *)data;
5170
5171         switch (event) {
5172         case DCA_PROVIDER_ADD:
5173                 /* if already enabled, don't do it again */
5174                 if (adapter->flags & IGB_FLAG_DCA_ENABLED)
5175                         break;
5176                 if (dca_add_requester(dev) == 0) {
5177                         adapter->flags |= IGB_FLAG_DCA_ENABLED;
5178                         dev_info(&pdev->dev, "DCA enabled\n");
5179                         igb_setup_dca(adapter);
5180                         break;
5181                 }
5182                 /* Fall Through since DCA is disabled. */
5183         case DCA_PROVIDER_REMOVE:
5184                 if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
5185                         /* without this a class_device is left
5186                          * hanging around in the sysfs model */
5187                         dca_remove_requester(dev);
5188                         dev_info(&pdev->dev, "DCA disabled\n");
5189                         adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
5190                         wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
5191                 }
5192                 break;
5193         }
5194
5195         return 0;
5196 }
5197
5198 static int igb_notify_dca(struct notifier_block *nb, unsigned long event,
5199                           void *p)
5200 {
5201         int ret_val;
5202
5203         ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event,
5204                                          __igb_notify_dca);
5205
5206         return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
5207 }
5208 #endif /* CONFIG_IGB_DCA */
5209
5210 #ifdef CONFIG_PCI_IOV
5211 static int igb_vf_configure(struct igb_adapter *adapter, int vf)
5212 {
5213         unsigned char mac_addr[ETH_ALEN];
5214
5215         eth_zero_addr(mac_addr);
5216         igb_set_vf_mac(adapter, vf, mac_addr);
5217
5218         return 0;
5219 }
5220
5221 static bool igb_vfs_are_assigned(struct igb_adapter *adapter)
5222 {
5223         struct pci_dev *pdev = adapter->pdev;
5224         struct pci_dev *vfdev;
5225         int dev_id;
5226
5227         switch (adapter->hw.mac.type) {
5228         case e1000_82576:
5229                 dev_id = IGB_82576_VF_DEV_ID;
5230                 break;
5231         case e1000_i350:
5232                 dev_id = IGB_I350_VF_DEV_ID;
5233                 break;
5234         default:
5235                 return false;
5236         }
5237
5238         /* loop through all the VFs to see if we own any that are assigned */
5239         vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, NULL);
5240         while (vfdev) {
5241                 /* if we don't own it we don't care */
5242                 if (vfdev->is_virtfn && vfdev->physfn == pdev) {
5243                         /* if it is assigned we cannot release it */
5244                         if (vfdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED)
5245                                 return true;
5246                 }
5247
5248                 vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, vfdev);
5249         }
5250
5251         return false;
5252 }
5253
5254 #endif
5255 static void igb_ping_all_vfs(struct igb_adapter *adapter)
5256 {
5257         struct e1000_hw *hw = &adapter->hw;
5258         u32 ping;
5259         int i;
5260
5261         for (i = 0 ; i < adapter->vfs_allocated_count; i++) {
5262                 ping = E1000_PF_CONTROL_MSG;
5263                 if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS)
5264                         ping |= E1000_VT_MSGTYPE_CTS;
5265                 igb_write_mbx(hw, &ping, 1, i);
5266         }
5267 }
5268
5269 static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
5270 {
5271         struct e1000_hw *hw = &adapter->hw;
5272         u32 vmolr = rd32(E1000_VMOLR(vf));
5273         struct vf_data_storage *vf_data = &adapter->vf_data[vf];
5274
5275         vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC |
5276                             IGB_VF_FLAG_MULTI_PROMISC);
5277         vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
5278
5279         if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) {
5280                 vmolr |= E1000_VMOLR_MPME;
5281                 vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC;
5282                 *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST;
5283         } else {
5284                 /*
5285                  * if we have hashes and we are clearing a multicast promisc
5286                  * flag we need to write the hashes to the MTA as this step
5287                  * was previously skipped
5288                  */
5289                 if (vf_data->num_vf_mc_hashes > 30) {
5290                         vmolr |= E1000_VMOLR_MPME;
5291                 } else if (vf_data->num_vf_mc_hashes) {
5292                         int j;
5293                         vmolr |= E1000_VMOLR_ROMPE;
5294                         for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
5295                                 igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
5296                 }
5297         }
5298
5299         wr32(E1000_VMOLR(vf), vmolr);
5300
5301         /* there are flags left unprocessed, likely not supported */
5302         if (*msgbuf & E1000_VT_MSGINFO_MASK)
5303                 return -EINVAL;
5304
5305         return 0;
5306
5307 }
5308
5309 static int igb_set_vf_multicasts(struct igb_adapter *adapter,
5310                                   u32 *msgbuf, u32 vf)
5311 {
5312         int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
5313         u16 *hash_list = (u16 *)&msgbuf[1];
5314         struct vf_data_storage *vf_data = &adapter->vf_data[vf];
5315         int i;
5316
5317         /* salt away the number of multicast addresses assigned
5318          * to this VF for later use to restore when the PF multi cast
5319          * list changes
5320          */
5321         vf_data->num_vf_mc_hashes = n;
5322
5323         /* only up to 30 hash values supported */
5324         if (n > 30)
5325                 n = 30;
5326
5327         /* store the hashes for later use */
5328         for (i = 0; i < n; i++)
5329                 vf_data->vf_mc_hashes[i] = hash_list[i];
5330
5331         /* Flush and reset the mta with the new values */
5332         igb_set_rx_mode(adapter->netdev);
5333
5334         return 0;
5335 }
5336
5337 static void igb_restore_vf_multicasts(struct igb_adapter *adapter)
5338 {
5339         struct e1000_hw *hw = &adapter->hw;
5340         struct vf_data_storage *vf_data;
5341         int i, j;
5342
5343         for (i = 0; i < adapter->vfs_allocated_count; i++) {
5344                 u32 vmolr = rd32(E1000_VMOLR(i));
5345                 vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
5346
5347                 vf_data = &adapter->vf_data[i];
5348
5349                 if ((vf_data->num_vf_mc_hashes > 30) ||
5350                     (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) {
5351                         vmolr |= E1000_VMOLR_MPME;
5352                 } else if (vf_data->num_vf_mc_hashes) {
5353                         vmolr |= E1000_VMOLR_ROMPE;
5354                         for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
5355                                 igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
5356                 }
5357                 wr32(E1000_VMOLR(i), vmolr);
5358         }
5359 }
5360
5361 static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf)
5362 {
5363         struct e1000_hw *hw = &adapter->hw;
5364         u32 pool_mask, reg, vid;
5365         int i;
5366
5367         pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
5368
5369         /* Find the vlan filter for this id */
5370         for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
5371                 reg = rd32(E1000_VLVF(i));
5372
5373                 /* remove the vf from the pool */
5374                 reg &= ~pool_mask;
5375
5376                 /* if pool is empty then remove entry from vfta */
5377                 if (!(reg & E1000_VLVF_POOLSEL_MASK) &&
5378                     (reg & E1000_VLVF_VLANID_ENABLE)) {
5379                         reg = 0;
5380                         vid = reg & E1000_VLVF_VLANID_MASK;
5381                         igb_vfta_set(hw, vid, false);
5382                 }
5383
5384                 wr32(E1000_VLVF(i), reg);
5385         }
5386
5387         adapter->vf_data[vf].vlans_enabled = 0;
5388 }
5389
5390 static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
5391 {
5392         struct e1000_hw *hw = &adapter->hw;
5393         u32 reg, i;
5394
5395         /* The vlvf table only exists on 82576 hardware and newer */
5396         if (hw->mac.type < e1000_82576)
5397                 return -1;
5398
5399         /* we only need to do this if VMDq is enabled */
5400         if (!adapter->vfs_allocated_count)
5401                 return -1;
5402
5403         /* Find the vlan filter for this id */
5404         for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
5405                 reg = rd32(E1000_VLVF(i));
5406                 if ((reg & E1000_VLVF_VLANID_ENABLE) &&
5407                     vid == (reg & E1000_VLVF_VLANID_MASK))
5408                         break;
5409         }
5410
5411         if (add) {
5412                 if (i == E1000_VLVF_ARRAY_SIZE) {
5413                         /* Did not find a matching VLAN ID entry that was
5414                          * enabled.  Search for a free filter entry, i.e.
5415                          * one without the enable bit set
5416                          */
5417                         for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
5418                                 reg = rd32(E1000_VLVF(i));
5419                                 if (!(reg & E1000_VLVF_VLANID_ENABLE))
5420                                         break;
5421                         }
5422                 }
5423                 if (i < E1000_VLVF_ARRAY_SIZE) {
5424                         /* Found an enabled/available entry */
5425                         reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
5426
5427                         /* if !enabled we need to set this up in vfta */
5428                         if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
5429                                 /* add VID to filter table */
5430                                 igb_vfta_set(hw, vid, true);
5431                                 reg |= E1000_VLVF_VLANID_ENABLE;
5432                         }
5433                         reg &= ~E1000_VLVF_VLANID_MASK;
5434                         reg |= vid;
5435                         wr32(E1000_VLVF(i), reg);
5436
5437                         /* do not modify RLPML for PF devices */
5438                         if (vf >= adapter->vfs_allocated_count)
5439                                 return 0;
5440
5441                         if (!adapter->vf_data[vf].vlans_enabled) {
5442                                 u32 size;
5443                                 reg = rd32(E1000_VMOLR(vf));
5444                                 size = reg & E1000_VMOLR_RLPML_MASK;
5445                                 size += 4;
5446                                 reg &= ~E1000_VMOLR_RLPML_MASK;
5447                                 reg |= size;
5448                                 wr32(E1000_VMOLR(vf), reg);
5449                         }
5450
5451                         adapter->vf_data[vf].vlans_enabled++;
5452                 }
5453         } else {
5454                 if (i < E1000_VLVF_ARRAY_SIZE) {
5455                         /* remove vf from the pool */
5456                         reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf));
5457                         /* if pool is empty then remove entry from vfta */
5458                         if (!(reg & E1000_VLVF_POOLSEL_MASK)) {
5459                                 reg = 0;
5460                                 igb_vfta_set(hw, vid, false);
5461                         }
5462                         wr32(E1000_VLVF(i), reg);
5463
5464                         /* do not modify RLPML for PF devices */
5465                         if (vf >= adapter->vfs_allocated_count)
5466                                 return 0;
5467
5468                         adapter->vf_data[vf].vlans_enabled--;
5469                         if (!adapter->vf_data[vf].vlans_enabled) {
5470                                 u32 size;
5471                                 reg = rd32(E1000_VMOLR(vf));
5472                                 size = reg & E1000_VMOLR_RLPML_MASK;
5473                                 size -= 4;
5474                                 reg &= ~E1000_VMOLR_RLPML_MASK;
5475                                 reg |= size;
5476                                 wr32(E1000_VMOLR(vf), reg);
5477                         }
5478                 }
5479         }
5480         return 0;
5481 }
5482
5483 static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf)
5484 {
5485         struct e1000_hw *hw = &adapter->hw;
5486
5487         if (vid)
5488                 wr32(E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT));
5489         else
5490                 wr32(E1000_VMVIR(vf), 0);
5491 }
5492
5493 static int igb_ndo_set_vf_vlan(struct net_device *netdev,
5494                                int vf, u16 vlan, u8 qos)
5495 {
5496         int err = 0;
5497         struct igb_adapter *adapter = netdev_priv(netdev);
5498
5499         if ((vf >= adapter->vfs_allocated_count) || (vlan > 4095) || (qos > 7))
5500                 return -EINVAL;
5501         if (vlan || qos) {
5502                 err = igb_vlvf_set(adapter, vlan, !!vlan, vf);
5503                 if (err)
5504                         goto out;
5505                 igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
5506                 igb_set_vmolr(adapter, vf, !vlan);
5507                 adapter->vf_data[vf].pf_vlan = vlan;
5508                 adapter->vf_data[vf].pf_qos = qos;
5509                 dev_info(&adapter->pdev->dev,
5510                          "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
5511                 if (test_bit(__IGB_DOWN, &adapter->state)) {
5512                         dev_warn(&adapter->pdev->dev,
5513                                  "The VF VLAN has been set,"
5514                                  " but the PF device is not up.\n");
5515                         dev_warn(&adapter->pdev->dev,
5516                                  "Bring the PF device up before"
5517                                  " attempting to use the VF device.\n");
5518                 }
5519         } else {
5520                 igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan,
5521                                    false, vf);
5522                 igb_set_vmvir(adapter, vlan, vf);
5523                 igb_set_vmolr(adapter, vf, true);
5524                 adapter->vf_data[vf].pf_vlan = 0;
5525                 adapter->vf_data[vf].pf_qos = 0;
5526        }
5527 out:
5528        return err;
5529 }
5530
5531 static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
5532 {
5533         int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
5534         int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK);
5535
5536         return igb_vlvf_set(adapter, vid, add, vf);
5537 }
5538
5539 static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
5540 {
5541         /* clear flags - except flag that indicates PF has set the MAC */
5542         adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC;
5543         adapter->vf_data[vf].last_nack = jiffies;
5544
5545         /* reset offloads to defaults */
5546         igb_set_vmolr(adapter, vf, true);
5547
5548         /* reset vlans for device */
5549         igb_clear_vf_vfta(adapter, vf);
5550         if (adapter->vf_data[vf].pf_vlan)
5551                 igb_ndo_set_vf_vlan(adapter->netdev, vf,
5552                                     adapter->vf_data[vf].pf_vlan,
5553                                     adapter->vf_data[vf].pf_qos);
5554         else
5555                 igb_clear_vf_vfta(adapter, vf);
5556
5557         /* reset multicast table array for vf */
5558         adapter->vf_data[vf].num_vf_mc_hashes = 0;
5559
5560         /* Flush and reset the mta with the new values */
5561         igb_set_rx_mode(adapter->netdev);
5562 }
5563
5564 static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
5565 {
5566         unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
5567
5568         /* clear mac address as we were hotplug removed/added */
5569         if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC))
5570                 eth_zero_addr(vf_mac);
5571
5572         /* process remaining reset events */
5573         igb_vf_reset(adapter, vf);
5574 }
5575
5576 static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
5577 {
5578         struct e1000_hw *hw = &adapter->hw;
5579         unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
5580         int rar_entry = hw->mac.rar_entry_count - (vf + 1);
5581         u32 reg, msgbuf[3];
5582         u8 *addr = (u8 *)(&msgbuf[1]);
5583
5584         /* process all the same items cleared in a function level reset */
5585         igb_vf_reset(adapter, vf);
5586
5587         /* set vf mac address */
5588         igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf);
5589
5590         /* enable transmit and receive for vf */
5591         reg = rd32(E1000_VFTE);
5592         wr32(E1000_VFTE, reg | (1 << vf));
5593         reg = rd32(E1000_VFRE);
5594         wr32(E1000_VFRE, reg | (1 << vf));
5595
5596         adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
5597
5598         /* reply to reset with ack and vf mac address */
5599         msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
5600         memcpy(addr, vf_mac, 6);
5601         igb_write_mbx(hw, msgbuf, 3, vf);
5602 }
5603
5604 static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf)
5605 {
5606         /*
5607          * The VF MAC Address is stored in a packed array of bytes
5608          * starting at the second 32 bit word of the msg array
5609          */
5610         unsigned char *addr = (char *)&msg[1];
5611         int err = -1;
5612
5613         if (is_valid_ether_addr(addr))
5614                 err = igb_set_vf_mac(adapter, vf, addr);
5615
5616         return err;
5617 }
5618
5619 static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf)
5620 {
5621         struct e1000_hw *hw = &adapter->hw;
5622         struct vf_data_storage *vf_data = &adapter->vf_data[vf];
5623         u32 msg = E1000_VT_MSGTYPE_NACK;
5624
5625         /* if device isn't clear to send it shouldn't be reading either */
5626         if (!(vf_data->flags & IGB_VF_FLAG_CTS) &&
5627             time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
5628                 igb_write_mbx(hw, &msg, 1, vf);
5629                 vf_data->last_nack = jiffies;
5630         }
5631 }
5632
5633 static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
5634 {
5635         struct pci_dev *pdev = adapter->pdev;
5636         u32 msgbuf[E1000_VFMAILBOX_SIZE];
5637         struct e1000_hw *hw = &adapter->hw;
5638         struct vf_data_storage *vf_data = &adapter->vf_data[vf];
5639         s32 retval;
5640
5641         retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
5642
5643         if (retval) {
5644                 /* if receive failed revoke VF CTS stats and restart init */
5645                 dev_err(&pdev->dev, "Error receiving message from VF\n");
5646                 vf_data->flags &= ~IGB_VF_FLAG_CTS;
5647                 if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
5648                         return;
5649                 goto out;
5650         }
5651
5652         /* this is a message we already processed, do nothing */
5653         if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
5654                 return;
5655
5656         /*
5657          * until the vf completes a reset it should not be
5658          * allowed to start any configuration.
5659          */
5660
5661         if (msgbuf[0] == E1000_VF_RESET) {
5662                 igb_vf_reset_msg(adapter, vf);
5663                 return;
5664         }
5665
5666         if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
5667                 if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
5668                         return;
5669                 retval = -1;
5670                 goto out;
5671         }
5672
5673         switch ((msgbuf[0] & 0xFFFF)) {
5674         case E1000_VF_SET_MAC_ADDR:
5675                 retval = -EINVAL;
5676                 if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC))
5677                         retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
5678                 else
5679                         dev_warn(&pdev->dev,
5680                                  "VF %d attempted to override administratively "
5681                                  "set MAC address\nReload the VF driver to "
5682                                  "resume operations\n", vf);
5683                 break;
5684         case E1000_VF_SET_PROMISC:
5685                 retval = igb_set_vf_promisc(adapter, msgbuf, vf);
5686                 break;
5687         case E1000_VF_SET_MULTICAST:
5688                 retval = igb_set_vf_multicasts(adapter, msgbuf, vf);
5689                 break;
5690         case E1000_VF_SET_LPE:
5691                 retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
5692                 break;
5693         case E1000_VF_SET_VLAN:
5694                 retval = -1;
5695                 if (vf_data->pf_vlan)
5696                         dev_warn(&pdev->dev,
5697                                  "VF %d attempted to override administratively "
5698                                  "set VLAN tag\nReload the VF driver to "
5699                                  "resume operations\n", vf);
5700                 else
5701                         retval = igb_set_vf_vlan(adapter, msgbuf, vf);
5702                 break;
5703         default:
5704                 dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
5705                 retval = -1;
5706                 break;
5707         }
5708
5709         msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
5710 out:
5711         /* notify the VF of the results of what it sent us */
5712         if (retval)
5713                 msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
5714         else
5715                 msgbuf[0] |= E1000_VT_MSGTYPE_ACK;
5716
5717         igb_write_mbx(hw, msgbuf, 1, vf);
5718 }
5719
5720 static void igb_msg_task(struct igb_adapter *adapter)
5721 {
5722         struct e1000_hw *hw = &adapter->hw;
5723         u32 vf;
5724
5725         for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
5726                 /* process any reset requests */
5727                 if (!igb_check_for_rst(hw, vf))
5728                         igb_vf_reset_event(adapter, vf);
5729
5730                 /* process any messages pending */
5731                 if (!igb_check_for_msg(hw, vf))
5732                         igb_rcv_msg_from_vf(adapter, vf);
5733
5734                 /* process any acks */
5735                 if (!igb_check_for_ack(hw, vf))
5736                         igb_rcv_ack_from_vf(adapter, vf);
5737         }
5738 }
5739
5740 /**
5741  *  igb_set_uta - Set unicast filter table address
5742  *  @adapter: board private structure
5743  *
5744  *  The unicast table address is a register array of 32-bit registers.
5745  *  The table is meant to be used in a way similar to how the MTA is used
5746  *  however due to certain limitations in the hardware it is necessary to
5747  *  set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
5748  *  enable bit to allow vlan tag stripping when promiscuous mode is enabled
5749  **/
5750 static void igb_set_uta(struct igb_adapter *adapter)
5751 {
5752         struct e1000_hw *hw = &adapter->hw;
5753         int i;
5754
5755         /* The UTA table only exists on 82576 hardware and newer */
5756         if (hw->mac.type < e1000_82576)
5757                 return;
5758
5759         /* we only need to do this if VMDq is enabled */
5760         if (!adapter->vfs_allocated_count)
5761                 return;
5762
5763         for (i = 0; i < hw->mac.uta_reg_count; i++)
5764                 array_wr32(E1000_UTA, i, ~0);
5765 }
5766
5767 /**
5768  * igb_intr_msi - Interrupt Handler
5769  * @irq: interrupt number
5770  * @data: pointer to a network interface device structure
5771  **/
5772 static irqreturn_t igb_intr_msi(int irq, void *data)
5773 {
5774         struct igb_adapter *adapter = data;
5775         struct igb_q_vector *q_vector = adapter->q_vector[0];
5776         struct e1000_hw *hw = &adapter->hw;
5777         /* read ICR disables interrupts using IAM */
5778         u32 icr = rd32(E1000_ICR);
5779
5780         igb_write_itr(q_vector);
5781
5782         if (icr & E1000_ICR_DRSTA)
5783                 schedule_work(&adapter->reset_task);
5784
5785         if (icr & E1000_ICR_DOUTSYNC) {
5786                 /* HW is reporting DMA is out of sync */
5787                 adapter->stats.doosync++;
5788         }
5789
5790         if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
5791                 hw->mac.get_link_status = 1;
5792                 if (!test_bit(__IGB_DOWN, &adapter->state))
5793                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
5794         }
5795
5796         if (icr & E1000_ICR_TS) {
5797                 u32 tsicr = rd32(E1000_TSICR);
5798
5799                 if (tsicr & E1000_TSICR_TXTS) {
5800                         /* acknowledge the interrupt */
5801                         wr32(E1000_TSICR, E1000_TSICR_TXTS);
5802                         /* retrieve hardware timestamp */
5803                         schedule_work(&adapter->ptp_tx_work);
5804                 }
5805         }
5806
5807         napi_schedule(&q_vector->napi);
5808
5809         return IRQ_HANDLED;
5810 }
5811
5812 /**
5813  * igb_intr - Legacy Interrupt Handler
5814  * @irq: interrupt number
5815  * @data: pointer to a network interface device structure
5816  **/
5817 static irqreturn_t igb_intr(int irq, void *data)
5818 {
5819         struct igb_adapter *adapter = data;
5820         struct igb_q_vector *q_vector = adapter->q_vector[0];
5821         struct e1000_hw *hw = &adapter->hw;
5822         /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked.  No
5823          * need for the IMC write */
5824         u32 icr = rd32(E1000_ICR);
5825
5826         /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
5827          * not set, then the adapter didn't send an interrupt */
5828         if (!(icr & E1000_ICR_INT_ASSERTED))
5829                 return IRQ_NONE;
5830
5831         igb_write_itr(q_vector);
5832
5833         if (icr & E1000_ICR_DRSTA)
5834                 schedule_work(&adapter->reset_task);
5835
5836         if (icr & E1000_ICR_DOUTSYNC) {
5837                 /* HW is reporting DMA is out of sync */
5838                 adapter->stats.doosync++;
5839         }
5840
5841         if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
5842                 hw->mac.get_link_status = 1;
5843                 /* guard against interrupt when we're going down */
5844                 if (!test_bit(__IGB_DOWN, &adapter->state))
5845                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
5846         }
5847
5848         if (icr & E1000_ICR_TS) {
5849                 u32 tsicr = rd32(E1000_TSICR);
5850
5851                 if (tsicr & E1000_TSICR_TXTS) {
5852                         /* acknowledge the interrupt */
5853                         wr32(E1000_TSICR, E1000_TSICR_TXTS);
5854                         /* retrieve hardware timestamp */
5855                         schedule_work(&adapter->ptp_tx_work);
5856                 }
5857         }
5858
5859         napi_schedule(&q_vector->napi);
5860
5861         return IRQ_HANDLED;
5862 }
5863
5864 static void igb_ring_irq_enable(struct igb_q_vector *q_vector)
5865 {
5866         struct igb_adapter *adapter = q_vector->adapter;
5867         struct e1000_hw *hw = &adapter->hw;
5868
5869         if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) ||
5870             (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) {
5871                 if ((adapter->num_q_vectors == 1) && !adapter->vf_data)
5872                         igb_set_itr(q_vector);
5873                 else
5874                         igb_update_ring_itr(q_vector);
5875         }
5876
5877         if (!test_bit(__IGB_DOWN, &adapter->state)) {
5878                 if (adapter->msix_entries)
5879                         wr32(E1000_EIMS, q_vector->eims_value);
5880                 else
5881                         igb_irq_enable(adapter);
5882         }
5883 }
5884
5885 /**
5886  * igb_poll - NAPI Rx polling callback
5887  * @napi: napi polling structure
5888  * @budget: count of how many packets we should handle
5889  **/
5890 static int igb_poll(struct napi_struct *napi, int budget)
5891 {
5892         struct igb_q_vector *q_vector = container_of(napi,
5893                                                      struct igb_q_vector,
5894                                                      napi);
5895         bool clean_complete = true;
5896
5897 #ifdef CONFIG_IGB_DCA
5898         if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED)
5899                 igb_update_dca(q_vector);
5900 #endif
5901         if (q_vector->tx.ring)
5902                 clean_complete = igb_clean_tx_irq(q_vector);
5903
5904         if (q_vector->rx.ring)
5905                 clean_complete &= igb_clean_rx_irq(q_vector, budget);
5906
5907         /* If all work not completed, return budget and keep polling */
5908         if (!clean_complete)
5909                 return budget;
5910
5911         /* If not enough Rx work done, exit the polling mode */
5912         napi_complete(napi);
5913         igb_ring_irq_enable(q_vector);
5914
5915         return 0;
5916 }
5917
5918 /**
5919  * igb_clean_tx_irq - Reclaim resources after transmit completes
5920  * @q_vector: pointer to q_vector containing needed info
5921  *
5922  * returns true if ring is completely cleaned
5923  **/
5924 static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
5925 {
5926         struct igb_adapter *adapter = q_vector->adapter;
5927         struct igb_ring *tx_ring = q_vector->tx.ring;
5928         struct igb_tx_buffer *tx_buffer;
5929         union e1000_adv_tx_desc *tx_desc;
5930         unsigned int total_bytes = 0, total_packets = 0;
5931         unsigned int budget = q_vector->tx.work_limit;
5932         unsigned int i = tx_ring->next_to_clean;
5933
5934         if (test_bit(__IGB_DOWN, &adapter->state))
5935                 return true;
5936
5937         tx_buffer = &tx_ring->tx_buffer_info[i];
5938         tx_desc = IGB_TX_DESC(tx_ring, i);
5939         i -= tx_ring->count;
5940
5941         do {
5942                 union e1000_adv_tx_desc *eop_desc = tx_buffer->next_to_watch;
5943
5944                 /* if next_to_watch is not set then there is no work pending */
5945                 if (!eop_desc)
5946                         break;
5947
5948                 /* prevent any other reads prior to eop_desc */
5949                 read_barrier_depends();
5950
5951                 /* if DD is not set pending work has not been completed */
5952                 if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)))
5953                         break;
5954
5955                 /* clear next_to_watch to prevent false hangs */
5956                 tx_buffer->next_to_watch = NULL;
5957
5958                 /* update the statistics for this packet */
5959                 total_bytes += tx_buffer->bytecount;
5960                 total_packets += tx_buffer->gso_segs;
5961
5962                 /* free the skb */
5963                 dev_kfree_skb_any(tx_buffer->skb);
5964
5965                 /* unmap skb header data */
5966                 dma_unmap_single(tx_ring->dev,
5967                                  dma_unmap_addr(tx_buffer, dma),
5968                                  dma_unmap_len(tx_buffer, len),
5969                                  DMA_TO_DEVICE);
5970
5971                 /* clear tx_buffer data */
5972                 tx_buffer->skb = NULL;
5973                 dma_unmap_len_set(tx_buffer, len, 0);
5974
5975                 /* clear last DMA location and unmap remaining buffers */
5976                 while (tx_desc != eop_desc) {
5977                         tx_buffer++;
5978                         tx_desc++;
5979                         i++;
5980                         if (unlikely(!i)) {
5981                                 i -= tx_ring->count;
5982                                 tx_buffer = tx_ring->tx_buffer_info;
5983                                 tx_desc = IGB_TX_DESC(tx_ring, 0);
5984                         }
5985
5986                         /* unmap any remaining paged data */
5987                         if (dma_unmap_len(tx_buffer, len)) {
5988                                 dma_unmap_page(tx_ring->dev,
5989                                                dma_unmap_addr(tx_buffer, dma),
5990                                                dma_unmap_len(tx_buffer, len),
5991                                                DMA_TO_DEVICE);
5992                                 dma_unmap_len_set(tx_buffer, len, 0);
5993                         }
5994                 }
5995
5996                 /* move us one more past the eop_desc for start of next pkt */
5997                 tx_buffer++;
5998                 tx_desc++;
5999                 i++;
6000                 if (unlikely(!i)) {
6001                         i -= tx_ring->count;
6002                         tx_buffer = tx_ring->tx_buffer_info;
6003                         tx_desc = IGB_TX_DESC(tx_ring, 0);
6004                 }
6005
6006                 /* issue prefetch for next Tx descriptor */
6007                 prefetch(tx_desc);
6008
6009                 /* update budget accounting */
6010                 budget--;
6011         } while (likely(budget));
6012
6013         netdev_tx_completed_queue(txring_txq(tx_ring),
6014                                   total_packets, total_bytes);
6015         i += tx_ring->count;
6016         tx_ring->next_to_clean = i;
6017         u64_stats_update_begin(&tx_ring->tx_syncp);
6018         tx_ring->tx_stats.bytes += total_bytes;
6019         tx_ring->tx_stats.packets += total_packets;
6020         u64_stats_update_end(&tx_ring->tx_syncp);
6021         q_vector->tx.total_bytes += total_bytes;
6022         q_vector->tx.total_packets += total_packets;
6023
6024         if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags)) {
6025                 struct e1000_hw *hw = &adapter->hw;
6026
6027                 /* Detect a transmit hang in hardware, this serializes the
6028                  * check with the clearing of time_stamp and movement of i */
6029                 clear_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
6030                 if (tx_buffer->next_to_watch &&
6031                     time_after(jiffies, tx_buffer->time_stamp +
6032                                (adapter->tx_timeout_factor * HZ)) &&
6033                     !(rd32(E1000_STATUS) & E1000_STATUS_TXOFF)) {
6034
6035                         /* detected Tx unit hang */
6036                         dev_err(tx_ring->dev,
6037                                 "Detected Tx Unit Hang\n"
6038                                 "  Tx Queue             <%d>\n"
6039                                 "  TDH                  <%x>\n"
6040                                 "  TDT                  <%x>\n"
6041                                 "  next_to_use          <%x>\n"
6042                                 "  next_to_clean        <%x>\n"
6043                                 "buffer_info[next_to_clean]\n"
6044                                 "  time_stamp           <%lx>\n"
6045                                 "  next_to_watch        <%p>\n"
6046                                 "  jiffies              <%lx>\n"
6047                                 "  desc.status          <%x>\n",
6048                                 tx_ring->queue_index,
6049                                 rd32(E1000_TDH(tx_ring->reg_idx)),
6050                                 readl(tx_ring->tail),
6051                                 tx_ring->next_to_use,
6052                                 tx_ring->next_to_clean,
6053                                 tx_buffer->time_stamp,
6054                                 tx_buffer->next_to_watch,
6055                                 jiffies,
6056                                 tx_buffer->next_to_watch->wb.status);
6057                         netif_stop_subqueue(tx_ring->netdev,
6058                                             tx_ring->queue_index);
6059
6060                         /* we are about to reset, no point in enabling stuff */
6061                         return true;
6062                 }
6063         }
6064
6065 #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
6066         if (unlikely(total_packets &&
6067                      netif_carrier_ok(tx_ring->netdev) &&
6068                      igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) {
6069                 /* Make sure that anybody stopping the queue after this
6070                  * sees the new next_to_clean.
6071                  */
6072                 smp_mb();
6073                 if (__netif_subqueue_stopped(tx_ring->netdev,
6074                                              tx_ring->queue_index) &&
6075                     !(test_bit(__IGB_DOWN, &adapter->state))) {
6076                         netif_wake_subqueue(tx_ring->netdev,
6077                                             tx_ring->queue_index);
6078
6079                         u64_stats_update_begin(&tx_ring->tx_syncp);
6080                         tx_ring->tx_stats.restart_queue++;
6081                         u64_stats_update_end(&tx_ring->tx_syncp);
6082                 }
6083         }
6084
6085         return !!budget;
6086 }
6087
6088 /**
6089  * igb_reuse_rx_page - page flip buffer and store it back on the ring
6090  * @rx_ring: rx descriptor ring to store buffers on
6091  * @old_buff: donor buffer to have page reused
6092  *
6093  * Synchronizes page for reuse by the adapter
6094  **/
6095 static void igb_reuse_rx_page(struct igb_ring *rx_ring,
6096                               struct igb_rx_buffer *old_buff)
6097 {
6098         struct igb_rx_buffer *new_buff;
6099         u16 nta = rx_ring->next_to_alloc;
6100
6101         new_buff = &rx_ring->rx_buffer_info[nta];
6102
6103         /* update, and store next to alloc */
6104         nta++;
6105         rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
6106
6107         /* transfer page from old buffer to new buffer */
6108         memcpy(new_buff, old_buff, sizeof(struct igb_rx_buffer));
6109
6110         /* sync the buffer for use by the device */
6111         dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma,
6112                                          old_buff->page_offset,
6113                                          IGB_RX_BUFSZ,
6114                                          DMA_FROM_DEVICE);
6115 }
6116
6117 static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer,
6118                                   struct page *page,
6119                                   unsigned int truesize)
6120 {
6121         /* avoid re-using remote pages */
6122         if (unlikely(page_to_nid(page) != numa_node_id()))
6123                 return false;
6124
6125 #if (PAGE_SIZE < 8192)
6126         /* if we are only owner of page we can reuse it */
6127         if (unlikely(page_count(page) != 1))
6128                 return false;
6129
6130         /* flip page offset to other buffer */
6131         rx_buffer->page_offset ^= IGB_RX_BUFSZ;
6132
6133         /* since we are the only owner of the page and we need to
6134          * increment it, just set the value to 2 in order to avoid
6135          * an unnecessary locked operation
6136          */
6137         atomic_set(&page->_count, 2);
6138 #else
6139         /* move offset up to the next cache line */
6140         rx_buffer->page_offset += truesize;
6141
6142         if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ))
6143                 return false;
6144
6145         /* bump ref count on page before it is given to the stack */
6146         get_page(page);
6147 #endif
6148
6149         return true;
6150 }
6151
6152 /**
6153  * igb_add_rx_frag - Add contents of Rx buffer to sk_buff
6154  * @rx_ring: rx descriptor ring to transact packets on
6155  * @rx_buffer: buffer containing page to add
6156  * @rx_desc: descriptor containing length of buffer written by hardware
6157  * @skb: sk_buff to place the data into
6158  *
6159  * This function will add the data contained in rx_buffer->page to the skb.
6160  * This is done either through a direct copy if the data in the buffer is
6161  * less than the skb header size, otherwise it will just attach the page as
6162  * a frag to the skb.
6163  *
6164  * The function will then update the page offset if necessary and return
6165  * true if the buffer can be reused by the adapter.
6166  **/
6167 static bool igb_add_rx_frag(struct igb_ring *rx_ring,
6168                             struct igb_rx_buffer *rx_buffer,
6169                             union e1000_adv_rx_desc *rx_desc,
6170                             struct sk_buff *skb)
6171 {
6172         struct page *page = rx_buffer->page;
6173         unsigned int size = le16_to_cpu(rx_desc->wb.upper.length);
6174 #if (PAGE_SIZE < 8192)
6175         unsigned int truesize = IGB_RX_BUFSZ;
6176 #else
6177         unsigned int truesize = ALIGN(size, L1_CACHE_BYTES);
6178 #endif
6179
6180         if ((size <= IGB_RX_HDR_LEN) && !skb_is_nonlinear(skb)) {
6181                 unsigned char *va = page_address(page) + rx_buffer->page_offset;
6182
6183                 if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) {
6184                         igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb);
6185                         va += IGB_TS_HDR_LEN;
6186                         size -= IGB_TS_HDR_LEN;
6187                 }
6188
6189                 memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
6190
6191                 /* we can reuse buffer as-is, just make sure it is local */
6192                 if (likely(page_to_nid(page) == numa_node_id()))
6193                         return true;
6194
6195                 /* this page cannot be reused so discard it */
6196                 put_page(page);
6197                 return false;
6198         }
6199
6200         skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
6201                         rx_buffer->page_offset, size, truesize);
6202
6203         return igb_can_reuse_rx_page(rx_buffer, page, truesize);
6204 }
6205
6206 static struct sk_buff *igb_build_rx_buffer(struct igb_ring *rx_ring,
6207                                            union e1000_adv_rx_desc *rx_desc)
6208 {
6209         struct igb_rx_buffer *rx_buffer;
6210         struct sk_buff *skb;
6211         struct page *page;
6212         void *page_addr;
6213         unsigned int size = le16_to_cpu(rx_desc->wb.upper.length);
6214 #if (PAGE_SIZE < 8192)
6215         unsigned int truesize = IGB_RX_BUFSZ;
6216 #else
6217         unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) +
6218                                 SKB_DATA_ALIGN(NET_SKB_PAD +
6219                                                NET_IP_ALIGN +
6220                                                size);
6221 #endif
6222
6223         /* If we spanned a buffer we have a huge mess so test for it */
6224         BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)));
6225
6226         rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
6227         page = rx_buffer->page;
6228         prefetchw(page);
6229
6230         page_addr = page_address(page) + rx_buffer->page_offset;
6231
6232         /* prefetch first cache line of first page */
6233         prefetch(page_addr + NET_SKB_PAD + NET_IP_ALIGN);
6234 #if L1_CACHE_BYTES < 128
6235         prefetch(page_addr + L1_CACHE_BYTES + NET_SKB_PAD + NET_IP_ALIGN);
6236 #endif
6237
6238         /* build an skb to around the page buffer */
6239         skb = build_skb(page_addr, truesize);
6240         if (unlikely(!skb)) {
6241                 rx_ring->rx_stats.alloc_failed++;
6242                 return NULL;
6243         }
6244
6245         /* we are reusing so sync this buffer for CPU use */
6246         dma_sync_single_range_for_cpu(rx_ring->dev,
6247                                       rx_buffer->dma,
6248                                       rx_buffer->page_offset,
6249                                       IGB_RX_BUFSZ,
6250                                       DMA_FROM_DEVICE);
6251
6252         /* update pointers within the skb to store the data */
6253         skb_reserve(skb, NET_IP_ALIGN + NET_SKB_PAD);
6254         __skb_put(skb, size);
6255
6256         /* pull timestamp out of packet data */
6257         if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) {
6258                 igb_ptp_rx_pktstamp(rx_ring->q_vector, skb->data, skb);
6259                 __skb_pull(skb, IGB_TS_HDR_LEN);
6260         }
6261
6262         if (igb_can_reuse_rx_page(rx_buffer, page, truesize)) {
6263                 /* hand second half of page back to the ring */
6264                 igb_reuse_rx_page(rx_ring, rx_buffer);
6265         } else {
6266                 /* we are not reusing the buffer so unmap it */
6267                 dma_unmap_page(rx_ring->dev, rx_buffer->dma,
6268                                PAGE_SIZE, DMA_FROM_DEVICE);
6269         }
6270
6271         /* clear contents of buffer_info */
6272         rx_buffer->dma = 0;
6273         rx_buffer->page = NULL;
6274
6275         return skb;
6276 }
6277
6278 static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring,
6279                                            union e1000_adv_rx_desc *rx_desc,
6280                                            struct sk_buff *skb)
6281 {
6282         struct igb_rx_buffer *rx_buffer;
6283         struct page *page;
6284
6285         rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
6286
6287         page = rx_buffer->page;
6288         prefetchw(page);
6289
6290         if (likely(!skb)) {
6291                 void *page_addr = page_address(page) +
6292                                   rx_buffer->page_offset;
6293
6294                 /* prefetch first cache line of first page */
6295                 prefetch(page_addr);
6296 #if L1_CACHE_BYTES < 128
6297                 prefetch(page_addr + L1_CACHE_BYTES);
6298 #endif
6299
6300                 /* allocate a skb to store the frags */
6301                 skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
6302                                                 IGB_RX_HDR_LEN);
6303                 if (unlikely(!skb)) {
6304                         rx_ring->rx_stats.alloc_failed++;
6305                         return NULL;
6306                 }
6307
6308                 /*
6309                  * we will be copying header into skb->data in
6310                  * pskb_may_pull so it is in our interest to prefetch
6311                  * it now to avoid a possible cache miss
6312                  */
6313                 prefetchw(skb->data);
6314         }
6315
6316         /* we are reusing so sync this buffer for CPU use */
6317         dma_sync_single_range_for_cpu(rx_ring->dev,
6318                                       rx_buffer->dma,
6319                                       rx_buffer->page_offset,
6320                                       IGB_RX_BUFSZ,
6321                                       DMA_FROM_DEVICE);
6322
6323         /* pull page into skb */
6324         if (igb_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
6325                 /* hand second half of page back to the ring */
6326                 igb_reuse_rx_page(rx_ring, rx_buffer);
6327         } else {
6328                 /* we are not reusing the buffer so unmap it */
6329                 dma_unmap_page(rx_ring->dev, rx_buffer->dma,
6330                                PAGE_SIZE, DMA_FROM_DEVICE);
6331         }
6332
6333         /* clear contents of rx_buffer */
6334         rx_buffer->page = NULL;
6335
6336         return skb;
6337 }
6338
6339 static inline void igb_rx_checksum(struct igb_ring *ring,
6340                                    union e1000_adv_rx_desc *rx_desc,
6341                                    struct sk_buff *skb)
6342 {
6343         skb_checksum_none_assert(skb);
6344
6345         /* Ignore Checksum bit is set */
6346         if (igb_test_staterr(rx_desc, E1000_RXD_STAT_IXSM))
6347                 return;
6348
6349         /* Rx checksum disabled via ethtool */
6350         if (!(ring->netdev->features & NETIF_F_RXCSUM))
6351                 return;
6352
6353         /* TCP/UDP checksum error bit is set */
6354         if (igb_test_staterr(rx_desc,
6355                              E1000_RXDEXT_STATERR_TCPE |
6356                              E1000_RXDEXT_STATERR_IPE)) {
6357                 /*
6358                  * work around errata with sctp packets where the TCPE aka
6359                  * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
6360                  * packets, (aka let the stack check the crc32c)
6361                  */
6362                 if (!((skb->len == 60) &&
6363                       test_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags))) {
6364                         u64_stats_update_begin(&ring->rx_syncp);
6365                         ring->rx_stats.csum_err++;
6366                         u64_stats_update_end(&ring->rx_syncp);
6367                 }
6368                 /* let the stack verify checksum errors */
6369                 return;
6370         }
6371         /* It must be a TCP or UDP packet with a valid checksum */
6372         if (igb_test_staterr(rx_desc, E1000_RXD_STAT_TCPCS |
6373                                       E1000_RXD_STAT_UDPCS))
6374                 skb->ip_summed = CHECKSUM_UNNECESSARY;
6375
6376         dev_dbg(ring->dev, "cksum success: bits %08X\n",
6377                 le32_to_cpu(rx_desc->wb.upper.status_error));
6378 }
6379
6380 static inline void igb_rx_hash(struct igb_ring *ring,
6381                                union e1000_adv_rx_desc *rx_desc,
6382                                struct sk_buff *skb)
6383 {
6384         if (ring->netdev->features & NETIF_F_RXHASH)
6385                 skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
6386 }
6387
6388 /**
6389  * igb_is_non_eop - process handling of non-EOP buffers
6390  * @rx_ring: Rx ring being processed
6391  * @rx_desc: Rx descriptor for current buffer
6392  * @skb: current socket buffer containing buffer in progress
6393  *
6394  * This function updates next to clean.  If the buffer is an EOP buffer
6395  * this function exits returning false, otherwise it will place the
6396  * sk_buff in the next buffer to be chained and return true indicating
6397  * that this is in fact a non-EOP buffer.
6398  **/
6399 static bool igb_is_non_eop(struct igb_ring *rx_ring,
6400                            union e1000_adv_rx_desc *rx_desc)
6401 {
6402         u32 ntc = rx_ring->next_to_clean + 1;
6403
6404         /* fetch, update, and store next to clean */
6405         ntc = (ntc < rx_ring->count) ? ntc : 0;
6406         rx_ring->next_to_clean = ntc;
6407
6408         prefetch(IGB_RX_DESC(rx_ring, ntc));
6409
6410         if (likely(igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)))
6411                 return false;
6412
6413         return true;
6414 }
6415
6416 /**
6417  * igb_get_headlen - determine size of header for LRO/GRO
6418  * @data: pointer to the start of the headers
6419  * @max_len: total length of section to find headers in
6420  *
6421  * This function is meant to determine the length of headers that will
6422  * be recognized by hardware for LRO, and GRO offloads.  The main
6423  * motivation of doing this is to only perform one pull for IPv4 TCP
6424  * packets so that we can do basic things like calculating the gso_size
6425  * based on the average data per packet.
6426  **/
6427 static unsigned int igb_get_headlen(unsigned char *data,
6428                                     unsigned int max_len)
6429 {
6430         union {
6431                 unsigned char *network;
6432                 /* l2 headers */
6433                 struct ethhdr *eth;
6434                 struct vlan_hdr *vlan;
6435                 /* l3 headers */
6436                 struct iphdr *ipv4;
6437                 struct ipv6hdr *ipv6;
6438         } hdr;
6439         __be16 protocol;
6440         u8 nexthdr = 0; /* default to not TCP */
6441         u8 hlen;
6442
6443         /* this should never happen, but better safe than sorry */
6444         if (max_len < ETH_HLEN)
6445                 return max_len;
6446
6447         /* initialize network frame pointer */
6448         hdr.network = data;
6449
6450         /* set first protocol and move network header forward */
6451         protocol = hdr.eth->h_proto;
6452         hdr.network += ETH_HLEN;
6453
6454         /* handle any vlan tag if present */
6455         if (protocol == __constant_htons(ETH_P_8021Q)) {
6456                 if ((hdr.network - data) > (max_len - VLAN_HLEN))
6457                         return max_len;
6458
6459                 protocol = hdr.vlan->h_vlan_encapsulated_proto;
6460                 hdr.network += VLAN_HLEN;
6461         }
6462
6463         /* handle L3 protocols */
6464         if (protocol == __constant_htons(ETH_P_IP)) {
6465                 if ((hdr.network - data) > (max_len - sizeof(struct iphdr)))
6466                         return max_len;
6467
6468                 /* access ihl as a u8 to avoid unaligned access on ia64 */
6469                 hlen = (hdr.network[0] & 0x0F) << 2;
6470
6471                 /* verify hlen meets minimum size requirements */
6472                 if (hlen < sizeof(struct iphdr))
6473                         return hdr.network - data;
6474
6475                 /* record next protocol if header is present */
6476                 if (!hdr.ipv4->frag_off)
6477                         nexthdr = hdr.ipv4->protocol;
6478         } else if (protocol == __constant_htons(ETH_P_IPV6)) {
6479                 if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr)))
6480                         return max_len;
6481
6482                 /* record next protocol */
6483                 nexthdr = hdr.ipv6->nexthdr;
6484                 hlen = sizeof(struct ipv6hdr);
6485         } else {
6486                 return hdr.network - data;
6487         }
6488
6489         /* relocate pointer to start of L4 header */
6490         hdr.network += hlen;
6491
6492         /* finally sort out TCP */
6493         if (nexthdr == IPPROTO_TCP) {
6494                 if ((hdr.network - data) > (max_len - sizeof(struct tcphdr)))
6495                         return max_len;
6496
6497                 /* access doff as a u8 to avoid unaligned access on ia64 */
6498                 hlen = (hdr.network[12] & 0xF0) >> 2;
6499
6500                 /* verify hlen meets minimum size requirements */
6501                 if (hlen < sizeof(struct tcphdr))
6502                         return hdr.network - data;
6503
6504                 hdr.network += hlen;
6505         } else if (nexthdr == IPPROTO_UDP) {
6506                 if ((hdr.network - data) > (max_len - sizeof(struct udphdr)))
6507                         return max_len;
6508
6509                 hdr.network += sizeof(struct udphdr);
6510         }
6511
6512         /*
6513          * If everything has gone correctly hdr.network should be the
6514          * data section of the packet and will be the end of the header.
6515          * If not then it probably represents the end of the last recognized
6516          * header.
6517          */
6518         if ((hdr.network - data) < max_len)
6519                 return hdr.network - data;
6520         else
6521                 return max_len;
6522 }
6523
6524 /**
6525  * igb_pull_tail - igb specific version of skb_pull_tail
6526  * @rx_ring: rx descriptor ring packet is being transacted on
6527  * @rx_desc: pointer to the EOP Rx descriptor
6528  * @skb: pointer to current skb being adjusted
6529  *
6530  * This function is an igb specific version of __pskb_pull_tail.  The
6531  * main difference between this version and the original function is that
6532  * this function can make several assumptions about the state of things
6533  * that allow for significant optimizations versus the standard function.
6534  * As a result we can do things like drop a frag and maintain an accurate
6535  * truesize for the skb.
6536  */
6537 static void igb_pull_tail(struct igb_ring *rx_ring,
6538                           union e1000_adv_rx_desc *rx_desc,
6539                           struct sk_buff *skb)
6540 {
6541         struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
6542         unsigned char *va;
6543         unsigned int pull_len;
6544
6545         /*
6546          * it is valid to use page_address instead of kmap since we are
6547          * working with pages allocated out of the lomem pool per
6548          * alloc_page(GFP_ATOMIC)
6549          */
6550         va = skb_frag_address(frag);
6551
6552         if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) {
6553                 /* retrieve timestamp from buffer */
6554                 igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb);
6555
6556                 /* update pointers to remove timestamp header */
6557                 skb_frag_size_sub(frag, IGB_TS_HDR_LEN);
6558                 frag->page_offset += IGB_TS_HDR_LEN;
6559                 skb->data_len -= IGB_TS_HDR_LEN;
6560                 skb->len -= IGB_TS_HDR_LEN;
6561
6562                 /* move va to start of packet data */
6563                 va += IGB_TS_HDR_LEN;
6564         }
6565
6566         /*
6567          * we need the header to contain the greater of either ETH_HLEN or
6568          * 60 bytes if the skb->len is less than 60 for skb_pad.
6569          */
6570         pull_len = igb_get_headlen(va, IGB_RX_HDR_LEN);
6571
6572         /* align pull length to size of long to optimize memcpy performance */
6573         skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
6574
6575         /* update all of the pointers */
6576         skb_frag_size_sub(frag, pull_len);
6577         frag->page_offset += pull_len;
6578         skb->data_len -= pull_len;
6579         skb->tail += pull_len;
6580 }
6581
6582 /**
6583  * igb_cleanup_headers - Correct corrupted or empty headers
6584  * @rx_ring: rx descriptor ring packet is being transacted on
6585  * @rx_desc: pointer to the EOP Rx descriptor
6586  * @skb: pointer to current skb being fixed
6587  *
6588  * Address the case where we are pulling data in on pages only
6589  * and as such no data is present in the skb header.
6590  *
6591  * In addition if skb is not at least 60 bytes we need to pad it so that
6592  * it is large enough to qualify as a valid Ethernet frame.
6593  *
6594  * Returns true if an error was encountered and skb was freed.
6595  **/
6596 static bool igb_cleanup_headers(struct igb_ring *rx_ring,
6597                                 union e1000_adv_rx_desc *rx_desc,
6598                                 struct sk_buff *skb)
6599 {
6600
6601         if (unlikely((igb_test_staterr(rx_desc,
6602                                        E1000_RXDEXT_ERR_FRAME_ERR_MASK)))) {
6603                 struct net_device *netdev = rx_ring->netdev;
6604                 if (!(netdev->features & NETIF_F_RXALL)) {
6605                         dev_kfree_skb_any(skb);
6606                         return true;
6607                 }
6608         }
6609
6610         /* place header in linear portion of buffer */
6611         if (skb_is_nonlinear(skb))
6612                 igb_pull_tail(rx_ring, rx_desc, skb);
6613
6614         /* if skb_pad returns an error the skb was freed */
6615         if (unlikely(skb->len < 60)) {
6616                 int pad_len = 60 - skb->len;
6617
6618                 if (skb_pad(skb, pad_len))
6619                         return true;
6620                 __skb_put(skb, pad_len);
6621         }
6622
6623         return false;
6624 }
6625
6626 /**
6627  * igb_process_skb_fields - Populate skb header fields from Rx descriptor
6628  * @rx_ring: rx descriptor ring packet is being transacted on
6629  * @rx_desc: pointer to the EOP Rx descriptor
6630  * @skb: pointer to current skb being populated
6631  *
6632  * This function checks the ring, descriptor, and packet information in
6633  * order to populate the hash, checksum, VLAN, timestamp, protocol, and
6634  * other fields within the skb.
6635  **/
6636 static void igb_process_skb_fields(struct igb_ring *rx_ring,
6637                                    union e1000_adv_rx_desc *rx_desc,
6638                                    struct sk_buff *skb)
6639 {
6640         struct net_device *dev = rx_ring->netdev;
6641
6642         igb_rx_hash(rx_ring, rx_desc, skb);
6643
6644         igb_rx_checksum(rx_ring, rx_desc, skb);
6645
6646         igb_ptp_rx_hwtstamp(rx_ring->q_vector, rx_desc, skb);
6647
6648         if ((dev->features & NETIF_F_HW_VLAN_RX) &&
6649             igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) {
6650                 u16 vid;
6651                 if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) &&
6652                     test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags))
6653                         vid = be16_to_cpu(rx_desc->wb.upper.vlan);
6654                 else
6655                         vid = le16_to_cpu(rx_desc->wb.upper.vlan);
6656
6657                 __vlan_hwaccel_put_tag(skb, vid);
6658         }
6659
6660         skb_record_rx_queue(skb, rx_ring->queue_index);
6661
6662         skb->protocol = eth_type_trans(skb, rx_ring->netdev);
6663 }
6664
6665 static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
6666 {
6667         struct igb_ring *rx_ring = q_vector->rx.ring;
6668         struct sk_buff *skb = rx_ring->skb;
6669         unsigned int total_bytes = 0, total_packets = 0;
6670         u16 cleaned_count = igb_desc_unused(rx_ring);
6671
6672         do {
6673                 union e1000_adv_rx_desc *rx_desc;
6674
6675                 /* return some buffers to hardware, one at a time is too slow */
6676                 if (cleaned_count >= IGB_RX_BUFFER_WRITE) {
6677                         igb_alloc_rx_buffers(rx_ring, cleaned_count);
6678                         cleaned_count = 0;
6679                 }
6680
6681                 rx_desc = IGB_RX_DESC(rx_ring, rx_ring->next_to_clean);
6682
6683                 if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD))
6684                         break;
6685
6686                 /* This memory barrier is needed to keep us from reading
6687                  * any other fields out of the rx_desc until we know the
6688                  * RXD_STAT_DD bit is set
6689                  */
6690                 rmb();
6691
6692                 /* retrieve a buffer from the ring */
6693                 if (ring_uses_build_skb(rx_ring))
6694                         skb = igb_build_rx_buffer(rx_ring, rx_desc);
6695                 else
6696                         skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb);
6697
6698                 /* exit if we failed to retrieve a buffer */
6699                 if (!skb)
6700                         break;
6701
6702                 cleaned_count++;
6703
6704                 /* fetch next buffer in frame if non-eop */
6705                 if (igb_is_non_eop(rx_ring, rx_desc))
6706                         continue;
6707
6708                 /* verify the packet layout is correct */
6709                 if (igb_cleanup_headers(rx_ring, rx_desc, skb)) {
6710                         skb = NULL;
6711                         continue;
6712                 }
6713
6714                 /* probably a little skewed due to removing CRC */
6715                 total_bytes += skb->len;
6716
6717                 /* populate checksum, timestamp, VLAN, and protocol */
6718                 igb_process_skb_fields(rx_ring, rx_desc, skb);
6719
6720                 napi_gro_receive(&q_vector->napi, skb);
6721
6722                 /* reset skb pointer */
6723                 skb = NULL;
6724
6725                 /* update budget accounting */
6726                 total_packets++;
6727         } while (likely(total_packets < budget));
6728
6729         /* place incomplete frames back on ring for completion */
6730         rx_ring->skb = skb;
6731
6732         u64_stats_update_begin(&rx_ring->rx_syncp);
6733         rx_ring->rx_stats.packets += total_packets;
6734         rx_ring->rx_stats.bytes += total_bytes;
6735         u64_stats_update_end(&rx_ring->rx_syncp);
6736         q_vector->rx.total_packets += total_packets;
6737         q_vector->rx.total_bytes += total_bytes;
6738
6739         if (cleaned_count)
6740                 igb_alloc_rx_buffers(rx_ring, cleaned_count);
6741
6742         return (total_packets < budget);
6743 }
6744
6745 static bool igb_alloc_mapped_page(struct igb_ring *rx_ring,
6746                                   struct igb_rx_buffer *bi)
6747 {
6748         struct page *page = bi->page;
6749         dma_addr_t dma;
6750
6751         /* since we are recycling buffers we should seldom need to alloc */
6752         if (likely(page))
6753                 return true;
6754
6755         /* alloc new page for storage */
6756         page = __skb_alloc_page(GFP_ATOMIC | __GFP_COLD, NULL);
6757         if (unlikely(!page)) {
6758                 rx_ring->rx_stats.alloc_failed++;
6759                 return false;
6760         }
6761
6762         /* map page for use */
6763         dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE);
6764
6765         /*
6766          * if mapping failed free memory back to system since
6767          * there isn't much point in holding memory we can't use
6768          */
6769         if (dma_mapping_error(rx_ring->dev, dma)) {
6770                 __free_page(page);
6771
6772                 rx_ring->rx_stats.alloc_failed++;
6773                 return false;
6774         }
6775
6776         bi->dma = dma;
6777         bi->page = page;
6778         bi->page_offset = 0;
6779
6780         return true;
6781 }
6782
6783 static inline unsigned int igb_rx_offset(struct igb_ring *rx_ring)
6784 {
6785         if (ring_uses_build_skb(rx_ring))
6786                 return NET_SKB_PAD + NET_IP_ALIGN;
6787         else
6788                 return 0;
6789 }
6790
6791 /**
6792  * igb_alloc_rx_buffers - Replace used receive buffers; packet split
6793  * @adapter: address of board private structure
6794  **/
6795 void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count)
6796 {
6797         union e1000_adv_rx_desc *rx_desc;
6798         struct igb_rx_buffer *bi;
6799         u16 i = rx_ring->next_to_use;
6800
6801         /* nothing to do */
6802         if (!cleaned_count)
6803                 return;
6804
6805         rx_desc = IGB_RX_DESC(rx_ring, i);
6806         bi = &rx_ring->rx_buffer_info[i];
6807         i -= rx_ring->count;
6808
6809         do {
6810                 if (!igb_alloc_mapped_page(rx_ring, bi))
6811                         break;
6812
6813                 /*
6814                  * Refresh the desc even if buffer_addrs didn't change
6815                  * because each write-back erases this info.
6816                  */
6817                 rx_desc->read.pkt_addr = cpu_to_le64(bi->dma +
6818                                                      bi->page_offset +
6819                                                      igb_rx_offset(rx_ring));
6820
6821                 rx_desc++;
6822                 bi++;
6823                 i++;
6824                 if (unlikely(!i)) {
6825                         rx_desc = IGB_RX_DESC(rx_ring, 0);
6826                         bi = rx_ring->rx_buffer_info;
6827                         i -= rx_ring->count;
6828                 }
6829
6830                 /* clear the hdr_addr for the next_to_use descriptor */
6831                 rx_desc->read.hdr_addr = 0;
6832
6833                 cleaned_count--;
6834         } while (cleaned_count);
6835
6836         i += rx_ring->count;
6837
6838         if (rx_ring->next_to_use != i) {
6839                 /* record the next descriptor to use */
6840                 rx_ring->next_to_use = i;
6841
6842                 /* update next to alloc since we have filled the ring */
6843                 rx_ring->next_to_alloc = i;
6844
6845                 /*
6846                  * Force memory writes to complete before letting h/w
6847                  * know there are new descriptors to fetch.  (Only
6848                  * applicable for weak-ordered memory model archs,
6849                  * such as IA-64).
6850                  */
6851                 wmb();
6852                 writel(i, rx_ring->tail);
6853         }
6854 }
6855
6856 /**
6857  * igb_mii_ioctl -
6858  * @netdev:
6859  * @ifreq:
6860  * @cmd:
6861  **/
6862 static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
6863 {
6864         struct igb_adapter *adapter = netdev_priv(netdev);
6865         struct mii_ioctl_data *data = if_mii(ifr);
6866
6867         if (adapter->hw.phy.media_type != e1000_media_type_copper)
6868                 return -EOPNOTSUPP;
6869
6870         switch (cmd) {
6871         case SIOCGMIIPHY:
6872                 data->phy_id = adapter->hw.phy.addr;
6873                 break;
6874         case SIOCGMIIREG:
6875                 if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
6876                                      &data->val_out))
6877                         return -EIO;
6878                 break;
6879         case SIOCSMIIREG:
6880         default:
6881                 return -EOPNOTSUPP;
6882         }
6883         return 0;
6884 }
6885
6886 /**
6887  * igb_ioctl -
6888  * @netdev:
6889  * @ifreq:
6890  * @cmd:
6891  **/
6892 static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
6893 {
6894         switch (cmd) {
6895         case SIOCGMIIPHY:
6896         case SIOCGMIIREG:
6897         case SIOCSMIIREG:
6898                 return igb_mii_ioctl(netdev, ifr, cmd);
6899         case SIOCSHWTSTAMP:
6900                 return igb_ptp_hwtstamp_ioctl(netdev, ifr, cmd);
6901         default:
6902                 return -EOPNOTSUPP;
6903         }
6904 }
6905
6906 s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
6907 {
6908         struct igb_adapter *adapter = hw->back;
6909
6910         if (pcie_capability_read_word(adapter->pdev, reg, value))
6911                 return -E1000_ERR_CONFIG;
6912
6913         return 0;
6914 }
6915
6916 s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
6917 {
6918         struct igb_adapter *adapter = hw->back;
6919
6920         if (pcie_capability_write_word(adapter->pdev, reg, *value))
6921                 return -E1000_ERR_CONFIG;
6922
6923         return 0;
6924 }
6925
6926 static void igb_vlan_mode(struct net_device *netdev, netdev_features_t features)
6927 {
6928         struct igb_adapter *adapter = netdev_priv(netdev);
6929         struct e1000_hw *hw = &adapter->hw;
6930         u32 ctrl, rctl;
6931         bool enable = !!(features & NETIF_F_HW_VLAN_RX);
6932
6933         if (enable) {
6934                 /* enable VLAN tag insert/strip */
6935                 ctrl = rd32(E1000_CTRL);
6936                 ctrl |= E1000_CTRL_VME;
6937                 wr32(E1000_CTRL, ctrl);
6938
6939                 /* Disable CFI check */
6940                 rctl = rd32(E1000_RCTL);
6941                 rctl &= ~E1000_RCTL_CFIEN;
6942                 wr32(E1000_RCTL, rctl);
6943         } else {
6944                 /* disable VLAN tag insert/strip */
6945                 ctrl = rd32(E1000_CTRL);
6946                 ctrl &= ~E1000_CTRL_VME;
6947                 wr32(E1000_CTRL, ctrl);
6948         }
6949
6950         igb_rlpml_set(adapter);
6951 }
6952
6953 static int igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
6954 {
6955         struct igb_adapter *adapter = netdev_priv(netdev);
6956         struct e1000_hw *hw = &adapter->hw;
6957         int pf_id = adapter->vfs_allocated_count;
6958
6959         /* attempt to add filter to vlvf array */
6960         igb_vlvf_set(adapter, vid, true, pf_id);
6961
6962         /* add the filter since PF can receive vlans w/o entry in vlvf */
6963         igb_vfta_set(hw, vid, true);
6964
6965         set_bit(vid, adapter->active_vlans);
6966
6967         return 0;
6968 }
6969
6970 static int igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
6971 {
6972         struct igb_adapter *adapter = netdev_priv(netdev);
6973         struct e1000_hw *hw = &adapter->hw;
6974         int pf_id = adapter->vfs_allocated_count;
6975         s32 err;
6976
6977         /* remove vlan from VLVF table array */
6978         err = igb_vlvf_set(adapter, vid, false, pf_id);
6979
6980         /* if vid was not present in VLVF just remove it from table */
6981         if (err)
6982                 igb_vfta_set(hw, vid, false);
6983
6984         clear_bit(vid, adapter->active_vlans);
6985
6986         return 0;
6987 }
6988
6989 static void igb_restore_vlan(struct igb_adapter *adapter)
6990 {
6991         u16 vid;
6992
6993         igb_vlan_mode(adapter->netdev, adapter->netdev->features);
6994
6995         for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
6996                 igb_vlan_rx_add_vid(adapter->netdev, vid);
6997 }
6998
6999 int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
7000 {
7001         struct pci_dev *pdev = adapter->pdev;
7002         struct e1000_mac_info *mac = &adapter->hw.mac;
7003
7004         mac->autoneg = 0;
7005
7006         /* Make sure dplx is at most 1 bit and lsb of speed is not set
7007          * for the switch() below to work */
7008         if ((spd & 1) || (dplx & ~1))
7009                 goto err_inval;
7010
7011         /* Fiber NIC's only allow 1000 Gbps Full duplex */
7012         if ((adapter->hw.phy.media_type == e1000_media_type_internal_serdes) &&
7013             spd != SPEED_1000 &&
7014             dplx != DUPLEX_FULL)
7015                 goto err_inval;
7016
7017         switch (spd + dplx) {
7018         case SPEED_10 + DUPLEX_HALF:
7019                 mac->forced_speed_duplex = ADVERTISE_10_HALF;
7020                 break;
7021         case SPEED_10 + DUPLEX_FULL:
7022                 mac->forced_speed_duplex = ADVERTISE_10_FULL;
7023                 break;
7024         case SPEED_100 + DUPLEX_HALF:
7025                 mac->forced_speed_duplex = ADVERTISE_100_HALF;
7026                 break;
7027         case SPEED_100 + DUPLEX_FULL:
7028                 mac->forced_speed_duplex = ADVERTISE_100_FULL;
7029                 break;
7030         case SPEED_1000 + DUPLEX_FULL:
7031                 mac->autoneg = 1;
7032                 adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
7033                 break;
7034         case SPEED_1000 + DUPLEX_HALF: /* not supported */
7035         default:
7036                 goto err_inval;
7037         }
7038
7039         /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
7040         adapter->hw.phy.mdix = AUTO_ALL_MODES;
7041
7042         return 0;
7043
7044 err_inval:
7045         dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
7046         return -EINVAL;
7047 }
7048
7049 static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
7050                           bool runtime)
7051 {
7052         struct net_device *netdev = pci_get_drvdata(pdev);
7053         struct igb_adapter *adapter = netdev_priv(netdev);
7054         struct e1000_hw *hw = &adapter->hw;
7055         u32 ctrl, rctl, status;
7056         u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
7057 #ifdef CONFIG_PM
7058         int retval = 0;
7059 #endif
7060
7061         netif_device_detach(netdev);
7062
7063         if (netif_running(netdev))
7064                 __igb_close(netdev, true);
7065
7066         igb_clear_interrupt_scheme(adapter);
7067
7068 #ifdef CONFIG_PM
7069         retval = pci_save_state(pdev);
7070         if (retval)
7071                 return retval;
7072 #endif
7073
7074         status = rd32(E1000_STATUS);
7075         if (status & E1000_STATUS_LU)
7076                 wufc &= ~E1000_WUFC_LNKC;
7077
7078         if (wufc) {
7079                 igb_setup_rctl(adapter);
7080                 igb_set_rx_mode(netdev);
7081
7082                 /* turn on all-multi mode if wake on multicast is enabled */
7083                 if (wufc & E1000_WUFC_MC) {
7084                         rctl = rd32(E1000_RCTL);
7085                         rctl |= E1000_RCTL_MPE;
7086                         wr32(E1000_RCTL, rctl);
7087                 }
7088
7089                 ctrl = rd32(E1000_CTRL);
7090                 /* advertise wake from D3Cold */
7091                 #define E1000_CTRL_ADVD3WUC 0x00100000
7092                 /* phy power management enable */
7093                 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
7094                 ctrl |= E1000_CTRL_ADVD3WUC;
7095                 wr32(E1000_CTRL, ctrl);
7096
7097                 /* Allow time for pending master requests to run */
7098                 igb_disable_pcie_master(hw);
7099
7100                 wr32(E1000_WUC, E1000_WUC_PME_EN);
7101                 wr32(E1000_WUFC, wufc);
7102         } else {
7103                 wr32(E1000_WUC, 0);
7104                 wr32(E1000_WUFC, 0);
7105         }
7106
7107         *enable_wake = wufc || adapter->en_mng_pt;
7108         if (!*enable_wake)
7109                 igb_power_down_link(adapter);
7110         else
7111                 igb_power_up_link(adapter);
7112
7113         /* Release control of h/w to f/w.  If f/w is AMT enabled, this
7114          * would have already happened in close and is redundant. */
7115         igb_release_hw_control(adapter);
7116
7117         pci_disable_device(pdev);
7118
7119         return 0;
7120 }
7121
7122 #ifdef CONFIG_PM
7123 #ifdef CONFIG_PM_SLEEP
7124 static int igb_suspend(struct device *dev)
7125 {
7126         int retval;
7127         bool wake;
7128         struct pci_dev *pdev = to_pci_dev(dev);
7129
7130         retval = __igb_shutdown(pdev, &wake, 0);
7131         if (retval)
7132                 return retval;
7133
7134         if (wake) {
7135                 pci_prepare_to_sleep(pdev);
7136         } else {
7137                 pci_wake_from_d3(pdev, false);
7138                 pci_set_power_state(pdev, PCI_D3hot);
7139         }
7140
7141         return 0;
7142 }
7143 #endif /* CONFIG_PM_SLEEP */
7144
7145 static int igb_resume(struct device *dev)
7146 {
7147         struct pci_dev *pdev = to_pci_dev(dev);
7148         struct net_device *netdev = pci_get_drvdata(pdev);
7149         struct igb_adapter *adapter = netdev_priv(netdev);
7150         struct e1000_hw *hw = &adapter->hw;
7151         u32 err;
7152
7153         pci_set_power_state(pdev, PCI_D0);
7154         pci_restore_state(pdev);
7155         pci_save_state(pdev);
7156
7157         err = pci_enable_device_mem(pdev);
7158         if (err) {
7159                 dev_err(&pdev->dev,
7160                         "igb: Cannot enable PCI device from suspend\n");
7161                 return err;
7162         }
7163         pci_set_master(pdev);
7164
7165         pci_enable_wake(pdev, PCI_D3hot, 0);
7166         pci_enable_wake(pdev, PCI_D3cold, 0);
7167
7168         if (igb_init_interrupt_scheme(adapter, true)) {
7169                 dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
7170                 return -ENOMEM;
7171         }
7172
7173         igb_reset(adapter);
7174
7175         /* let the f/w know that the h/w is now under the control of the
7176          * driver. */
7177         igb_get_hw_control(adapter);
7178
7179         wr32(E1000_WUS, ~0);
7180
7181         if (netdev->flags & IFF_UP) {
7182                 rtnl_lock();
7183                 err = __igb_open(netdev, true);
7184                 rtnl_unlock();
7185                 if (err)
7186                         return err;
7187         }
7188
7189         netif_device_attach(netdev);
7190         return 0;
7191 }
7192
7193 #ifdef CONFIG_PM_RUNTIME
7194 static int igb_runtime_idle(struct device *dev)
7195 {
7196         struct pci_dev *pdev = to_pci_dev(dev);
7197         struct net_device *netdev = pci_get_drvdata(pdev);
7198         struct igb_adapter *adapter = netdev_priv(netdev);
7199
7200         if (!igb_has_link(adapter))
7201                 pm_schedule_suspend(dev, MSEC_PER_SEC * 5);
7202
7203         return -EBUSY;
7204 }
7205
7206 static int igb_runtime_suspend(struct device *dev)
7207 {
7208         struct pci_dev *pdev = to_pci_dev(dev);
7209         int retval;
7210         bool wake;
7211
7212         retval = __igb_shutdown(pdev, &wake, 1);
7213         if (retval)
7214                 return retval;
7215
7216         if (wake) {
7217                 pci_prepare_to_sleep(pdev);
7218         } else {
7219                 pci_wake_from_d3(pdev, false);
7220                 pci_set_power_state(pdev, PCI_D3hot);
7221         }
7222
7223         return 0;
7224 }
7225
7226 static int igb_runtime_resume(struct device *dev)
7227 {
7228         return igb_resume(dev);
7229 }
7230 #endif /* CONFIG_PM_RUNTIME */
7231 #endif
7232
7233 static void igb_shutdown(struct pci_dev *pdev)
7234 {
7235         bool wake;
7236
7237         __igb_shutdown(pdev, &wake, 0);
7238
7239         if (system_state == SYSTEM_POWER_OFF) {
7240                 pci_wake_from_d3(pdev, wake);
7241                 pci_set_power_state(pdev, PCI_D3hot);
7242         }
7243 }
7244
7245 #ifdef CONFIG_PCI_IOV
7246 static int igb_sriov_reinit(struct pci_dev *dev)
7247 {
7248         struct net_device *netdev = pci_get_drvdata(dev);
7249         struct igb_adapter *adapter = netdev_priv(netdev);
7250         struct pci_dev *pdev = adapter->pdev;
7251
7252         rtnl_lock();
7253
7254         if (netif_running(netdev))
7255                 igb_close(netdev);
7256
7257         igb_clear_interrupt_scheme(adapter);
7258
7259         igb_init_queue_configuration(adapter);
7260
7261         if (igb_init_interrupt_scheme(adapter, true)) {
7262                 dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
7263                 return -ENOMEM;
7264         }
7265
7266         if (netif_running(netdev))
7267                 igb_open(netdev);
7268
7269         rtnl_unlock();
7270
7271         return 0;
7272 }
7273
7274 static int igb_pci_disable_sriov(struct pci_dev *dev)
7275 {
7276         int err = igb_disable_sriov(dev);
7277
7278         if (!err)
7279                 err = igb_sriov_reinit(dev);
7280
7281         return err;
7282 }
7283
7284 static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs)
7285 {
7286         int err = igb_enable_sriov(dev, num_vfs);
7287
7288         if (err)
7289                 goto out;
7290
7291         err = igb_sriov_reinit(dev);
7292         if (!err)
7293                 return num_vfs;
7294
7295 out:
7296         return err;
7297 }
7298
7299 #endif
7300 static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
7301 {
7302 #ifdef CONFIG_PCI_IOV
7303         if (num_vfs == 0)
7304                 return igb_pci_disable_sriov(dev);
7305         else
7306                 return igb_pci_enable_sriov(dev, num_vfs);
7307 #endif
7308         return 0;
7309 }
7310
7311 #ifdef CONFIG_NET_POLL_CONTROLLER
7312 /*
7313  * Polling 'interrupt' - used by things like netconsole to send skbs
7314  * without having to re-enable interrupts. It's not called while
7315  * the interrupt routine is executing.
7316  */
7317 static void igb_netpoll(struct net_device *netdev)
7318 {
7319         struct igb_adapter *adapter = netdev_priv(netdev);
7320         struct e1000_hw *hw = &adapter->hw;
7321         struct igb_q_vector *q_vector;
7322         int i;
7323
7324         for (i = 0; i < adapter->num_q_vectors; i++) {
7325                 q_vector = adapter->q_vector[i];
7326                 if (adapter->msix_entries)
7327                         wr32(E1000_EIMC, q_vector->eims_value);
7328                 else
7329                         igb_irq_disable(adapter);
7330                 napi_schedule(&q_vector->napi);
7331         }
7332 }
7333 #endif /* CONFIG_NET_POLL_CONTROLLER */
7334
7335 /**
7336  * igb_io_error_detected - called when PCI error is detected
7337  * @pdev: Pointer to PCI device
7338  * @state: The current pci connection state
7339  *
7340  * This function is called after a PCI bus error affecting
7341  * this device has been detected.
7342  */
7343 static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
7344                                               pci_channel_state_t state)
7345 {
7346         struct net_device *netdev = pci_get_drvdata(pdev);
7347         struct igb_adapter *adapter = netdev_priv(netdev);
7348
7349         netif_device_detach(netdev);
7350
7351         if (state == pci_channel_io_perm_failure)
7352                 return PCI_ERS_RESULT_DISCONNECT;
7353
7354         if (netif_running(netdev))
7355                 igb_down(adapter);
7356         pci_disable_device(pdev);
7357
7358         /* Request a slot slot reset. */
7359         return PCI_ERS_RESULT_NEED_RESET;
7360 }
7361
7362 /**
7363  * igb_io_slot_reset - called after the pci bus has been reset.
7364  * @pdev: Pointer to PCI device
7365  *
7366  * Restart the card from scratch, as if from a cold-boot. Implementation
7367  * resembles the first-half of the igb_resume routine.
7368  */
7369 static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
7370 {
7371         struct net_device *netdev = pci_get_drvdata(pdev);
7372         struct igb_adapter *adapter = netdev_priv(netdev);
7373         struct e1000_hw *hw = &adapter->hw;
7374         pci_ers_result_t result;
7375         int err;
7376
7377         if (pci_enable_device_mem(pdev)) {
7378                 dev_err(&pdev->dev,
7379                         "Cannot re-enable PCI device after reset.\n");
7380                 result = PCI_ERS_RESULT_DISCONNECT;
7381         } else {
7382                 pci_set_master(pdev);
7383                 pci_restore_state(pdev);
7384                 pci_save_state(pdev);
7385
7386                 pci_enable_wake(pdev, PCI_D3hot, 0);
7387                 pci_enable_wake(pdev, PCI_D3cold, 0);
7388
7389                 igb_reset(adapter);
7390                 wr32(E1000_WUS, ~0);
7391                 result = PCI_ERS_RESULT_RECOVERED;
7392         }
7393
7394         err = pci_cleanup_aer_uncorrect_error_status(pdev);
7395         if (err) {
7396                 dev_err(&pdev->dev, "pci_cleanup_aer_uncorrect_error_status "
7397                         "failed 0x%0x\n", err);
7398                 /* non-fatal, continue */
7399         }
7400
7401         return result;
7402 }
7403
7404 /**
7405  * igb_io_resume - called when traffic can start flowing again.
7406  * @pdev: Pointer to PCI device
7407  *
7408  * This callback is called when the error recovery driver tells us that
7409  * its OK to resume normal operation. Implementation resembles the
7410  * second-half of the igb_resume routine.
7411  */
7412 static void igb_io_resume(struct pci_dev *pdev)
7413 {
7414         struct net_device *netdev = pci_get_drvdata(pdev);
7415         struct igb_adapter *adapter = netdev_priv(netdev);
7416
7417         if (netif_running(netdev)) {
7418                 if (igb_up(adapter)) {
7419                         dev_err(&pdev->dev, "igb_up failed after reset\n");
7420                         return;
7421                 }
7422         }
7423
7424         netif_device_attach(netdev);
7425
7426         /* let the f/w know that the h/w is now under the control of the
7427          * driver. */
7428         igb_get_hw_control(adapter);
7429 }
7430
7431 static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
7432                              u8 qsel)
7433 {
7434         u32 rar_low, rar_high;
7435         struct e1000_hw *hw = &adapter->hw;
7436
7437         /* HW expects these in little endian so we reverse the byte order
7438          * from network order (big endian) to little endian
7439          */
7440         rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
7441                   ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
7442         rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
7443
7444         /* Indicate to hardware the Address is Valid. */
7445         rar_high |= E1000_RAH_AV;
7446
7447         if (hw->mac.type == e1000_82575)
7448                 rar_high |= E1000_RAH_POOL_1 * qsel;
7449         else
7450                 rar_high |= E1000_RAH_POOL_1 << qsel;
7451
7452         wr32(E1000_RAL(index), rar_low);
7453         wrfl();
7454         wr32(E1000_RAH(index), rar_high);
7455         wrfl();
7456 }
7457
7458 static int igb_set_vf_mac(struct igb_adapter *adapter,
7459                           int vf, unsigned char *mac_addr)
7460 {
7461         struct e1000_hw *hw = &adapter->hw;
7462         /* VF MAC addresses start at end of receive addresses and moves
7463          * torwards the first, as a result a collision should not be possible */
7464         int rar_entry = hw->mac.rar_entry_count - (vf + 1);
7465
7466         memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
7467
7468         igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf);
7469
7470         return 0;
7471 }
7472
7473 static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
7474 {
7475         struct igb_adapter *adapter = netdev_priv(netdev);
7476         if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count))
7477                 return -EINVAL;
7478         adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
7479         dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
7480         dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
7481                                       " change effective.");
7482         if (test_bit(__IGB_DOWN, &adapter->state)) {
7483                 dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
7484                          " but the PF device is not up.\n");
7485                 dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
7486                          " attempting to use the VF device.\n");
7487         }
7488         return igb_set_vf_mac(adapter, vf, mac);
7489 }
7490
7491 static int igb_link_mbps(int internal_link_speed)
7492 {
7493         switch (internal_link_speed) {
7494         case SPEED_100:
7495                 return 100;
7496         case SPEED_1000:
7497                 return 1000;
7498         default:
7499                 return 0;
7500         }
7501 }
7502
7503 static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate,
7504                                   int link_speed)
7505 {
7506         int rf_dec, rf_int;
7507         u32 bcnrc_val;
7508
7509         if (tx_rate != 0) {
7510                 /* Calculate the rate factor values to set */
7511                 rf_int = link_speed / tx_rate;
7512                 rf_dec = (link_speed - (rf_int * tx_rate));
7513                 rf_dec = (rf_dec * (1<<E1000_RTTBCNRC_RF_INT_SHIFT)) / tx_rate;
7514
7515                 bcnrc_val = E1000_RTTBCNRC_RS_ENA;
7516                 bcnrc_val |= ((rf_int<<E1000_RTTBCNRC_RF_INT_SHIFT) &
7517                                E1000_RTTBCNRC_RF_INT_MASK);
7518                 bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK);
7519         } else {
7520                 bcnrc_val = 0;
7521         }
7522
7523         wr32(E1000_RTTDQSEL, vf); /* vf X uses queue X */
7524         /*
7525          * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
7526          * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported.
7527          */
7528         wr32(E1000_RTTBCNRM, 0x14);
7529         wr32(E1000_RTTBCNRC, bcnrc_val);
7530 }
7531
7532 static void igb_check_vf_rate_limit(struct igb_adapter *adapter)
7533 {
7534         int actual_link_speed, i;
7535         bool reset_rate = false;
7536
7537         /* VF TX rate limit was not set or not supported */
7538         if ((adapter->vf_rate_link_speed == 0) ||
7539             (adapter->hw.mac.type != e1000_82576))
7540                 return;
7541
7542         actual_link_speed = igb_link_mbps(adapter->link_speed);
7543         if (actual_link_speed != adapter->vf_rate_link_speed) {
7544                 reset_rate = true;
7545                 adapter->vf_rate_link_speed = 0;
7546                 dev_info(&adapter->pdev->dev,
7547                          "Link speed has been changed. VF Transmit "
7548                          "rate is disabled\n");
7549         }
7550
7551         for (i = 0; i < adapter->vfs_allocated_count; i++) {
7552                 if (reset_rate)
7553                         adapter->vf_data[i].tx_rate = 0;
7554
7555                 igb_set_vf_rate_limit(&adapter->hw, i,
7556                                       adapter->vf_data[i].tx_rate,
7557                                       actual_link_speed);
7558         }
7559 }
7560
7561 static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
7562 {
7563         struct igb_adapter *adapter = netdev_priv(netdev);
7564         struct e1000_hw *hw = &adapter->hw;
7565         int actual_link_speed;
7566
7567         if (hw->mac.type != e1000_82576)
7568                 return -EOPNOTSUPP;
7569
7570         actual_link_speed = igb_link_mbps(adapter->link_speed);
7571         if ((vf >= adapter->vfs_allocated_count) ||
7572             (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) ||
7573             (tx_rate < 0) || (tx_rate > actual_link_speed))
7574                 return -EINVAL;
7575
7576         adapter->vf_rate_link_speed = actual_link_speed;
7577         adapter->vf_data[vf].tx_rate = (u16)tx_rate;
7578         igb_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed);
7579
7580         return 0;
7581 }
7582
7583 static int igb_ndo_get_vf_config(struct net_device *netdev,
7584                                  int vf, struct ifla_vf_info *ivi)
7585 {
7586         struct igb_adapter *adapter = netdev_priv(netdev);
7587         if (vf >= adapter->vfs_allocated_count)
7588                 return -EINVAL;
7589         ivi->vf = vf;
7590         memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
7591         ivi->tx_rate = adapter->vf_data[vf].tx_rate;
7592         ivi->vlan = adapter->vf_data[vf].pf_vlan;
7593         ivi->qos = adapter->vf_data[vf].pf_qos;
7594         return 0;
7595 }
7596
7597 static void igb_vmm_control(struct igb_adapter *adapter)
7598 {
7599         struct e1000_hw *hw = &adapter->hw;
7600         u32 reg;
7601
7602         switch (hw->mac.type) {
7603         case e1000_82575:
7604         case e1000_i210:
7605         case e1000_i211:
7606         default:
7607                 /* replication is not supported for 82575 */
7608                 return;
7609         case e1000_82576:
7610                 /* notify HW that the MAC is adding vlan tags */
7611                 reg = rd32(E1000_DTXCTL);
7612                 reg |= E1000_DTXCTL_VLAN_ADDED;
7613                 wr32(E1000_DTXCTL, reg);
7614         case e1000_82580:
7615                 /* enable replication vlan tag stripping */
7616                 reg = rd32(E1000_RPLOLR);
7617                 reg |= E1000_RPLOLR_STRVLAN;
7618                 wr32(E1000_RPLOLR, reg);
7619         case e1000_i350:
7620                 /* none of the above registers are supported by i350 */
7621                 break;
7622         }
7623
7624         if (adapter->vfs_allocated_count) {
7625                 igb_vmdq_set_loopback_pf(hw, true);
7626                 igb_vmdq_set_replication_pf(hw, true);
7627                 igb_vmdq_set_anti_spoofing_pf(hw, true,
7628                                                 adapter->vfs_allocated_count);
7629         } else {
7630                 igb_vmdq_set_loopback_pf(hw, false);
7631                 igb_vmdq_set_replication_pf(hw, false);
7632         }
7633 }
7634
7635 static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
7636 {
7637         struct e1000_hw *hw = &adapter->hw;
7638         u32 dmac_thr;
7639         u16 hwm;
7640
7641         if (hw->mac.type > e1000_82580) {
7642                 if (adapter->flags & IGB_FLAG_DMAC) {
7643                         u32 reg;
7644
7645                         /* force threshold to 0. */
7646                         wr32(E1000_DMCTXTH, 0);
7647
7648                         /*
7649                          * DMA Coalescing high water mark needs to be greater
7650                          * than the Rx threshold. Set hwm to PBA - max frame
7651                          * size in 16B units, capping it at PBA - 6KB.
7652                          */
7653                         hwm = 64 * pba - adapter->max_frame_size / 16;
7654                         if (hwm < 64 * (pba - 6))
7655                                 hwm = 64 * (pba - 6);
7656                         reg = rd32(E1000_FCRTC);
7657                         reg &= ~E1000_FCRTC_RTH_COAL_MASK;
7658                         reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT)
7659                                 & E1000_FCRTC_RTH_COAL_MASK);
7660                         wr32(E1000_FCRTC, reg);
7661
7662                         /*
7663                          * Set the DMA Coalescing Rx threshold to PBA - 2 * max
7664                          * frame size, capping it at PBA - 10KB.
7665                          */
7666                         dmac_thr = pba - adapter->max_frame_size / 512;
7667                         if (dmac_thr < pba - 10)
7668                                 dmac_thr = pba - 10;
7669                         reg = rd32(E1000_DMACR);
7670                         reg &= ~E1000_DMACR_DMACTHR_MASK;
7671                         reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT)
7672                                 & E1000_DMACR_DMACTHR_MASK);
7673
7674                         /* transition to L0x or L1 if available..*/
7675                         reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
7676
7677                         /* watchdog timer= +-1000 usec in 32usec intervals */
7678                         reg |= (1000 >> 5);
7679
7680                         /* Disable BMC-to-OS Watchdog Enable */
7681                         reg &= ~E1000_DMACR_DC_BMC2OSW_EN;
7682                         wr32(E1000_DMACR, reg);
7683
7684                         /*
7685                          * no lower threshold to disable
7686                          * coalescing(smart fifb)-UTRESH=0
7687                          */
7688                         wr32(E1000_DMCRTRH, 0);
7689
7690                         reg = (IGB_DMCTLX_DCFLUSH_DIS | 0x4);
7691
7692                         wr32(E1000_DMCTLX, reg);
7693
7694                         /*
7695                          * free space in tx packet buffer to wake from
7696                          * DMA coal
7697                          */
7698                         wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE -
7699                              (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6);
7700
7701                         /*
7702                          * make low power state decision controlled
7703                          * by DMA coal
7704                          */
7705                         reg = rd32(E1000_PCIEMISC);
7706                         reg &= ~E1000_PCIEMISC_LX_DECISION;
7707                         wr32(E1000_PCIEMISC, reg);
7708                 } /* endif adapter->dmac is not disabled */
7709         } else if (hw->mac.type == e1000_82580) {
7710                 u32 reg = rd32(E1000_PCIEMISC);
7711                 wr32(E1000_PCIEMISC, reg & ~E1000_PCIEMISC_LX_DECISION);
7712                 wr32(E1000_DMACR, 0);
7713         }
7714 }
7715
7716 /*  igb_read_i2c_byte - Reads 8 bit word over I2C
7717  *  @hw: pointer to hardware structure
7718  *  @byte_offset: byte offset to read
7719  *  @dev_addr: device address
7720  *  @data: value read
7721  *
7722  *  Performs byte read operation over I2C interface at
7723  *  a specified device address.
7724  */
7725 s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
7726                                 u8 dev_addr, u8 *data)
7727 {
7728         struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
7729         struct i2c_client *this_client = adapter->i2c_client;
7730         s32 status;
7731         u16 swfw_mask = 0;
7732
7733         if (!this_client)
7734                 return E1000_ERR_I2C;
7735
7736         swfw_mask = E1000_SWFW_PHY0_SM;
7737
7738         if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)
7739             != E1000_SUCCESS)
7740                 return E1000_ERR_SWFW_SYNC;
7741
7742         status = i2c_smbus_read_byte_data(this_client, byte_offset);
7743         hw->mac.ops.release_swfw_sync(hw, swfw_mask);
7744
7745         if (status < 0)
7746                 return E1000_ERR_I2C;
7747         else {
7748                 *data = status;
7749                 return E1000_SUCCESS;
7750         }
7751 }
7752
7753 /*  igb_write_i2c_byte - Writes 8 bit word over I2C
7754  *  @hw: pointer to hardware structure
7755  *  @byte_offset: byte offset to write
7756  *  @dev_addr: device address
7757  *  @data: value to write
7758  *
7759  *  Performs byte write operation over I2C interface at
7760  *  a specified device address.
7761  */
7762 s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
7763                                  u8 dev_addr, u8 data)
7764 {
7765         struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
7766         struct i2c_client *this_client = adapter->i2c_client;
7767         s32 status;
7768         u16 swfw_mask = E1000_SWFW_PHY0_SM;
7769
7770         if (!this_client)
7771                 return E1000_ERR_I2C;
7772
7773         if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS)
7774                 return E1000_ERR_SWFW_SYNC;
7775         status = i2c_smbus_write_byte_data(this_client, byte_offset, data);
7776         hw->mac.ops.release_swfw_sync(hw, swfw_mask);
7777
7778         if (status)
7779                 return E1000_ERR_I2C;
7780         else
7781                 return E1000_SUCCESS;
7782
7783 }
7784 /* igb_main.c */