Merge tag 'powerpc-6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...

[platform/kernel/linux-starfive.git] / drivers / net / ethernet / intel / i40e / i40e_txrx.c

// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 2013 - 2018 Intel Corporation. */

#include <linux/prefetch.h>
#include <linux/bpf_trace.h>
#include <net/mpls.h>
#include <net/xdp.h>
#include "i40e.h"
#include "i40e_trace.h"
#include "i40e_prototype.h"
#include "i40e_txrx_common.h"
#include "i40e_xsk.h"

#define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS)
/**
 * i40e_fdir - Generate a Flow Director descriptor based on fdata
 * @tx_ring: Tx ring to send buffer on
 * @fdata: Flow director filter data
 * @add: Indicate if we are adding a rule or deleting one
 *
 **/
static void i40e_fdir(struct i40e_ring *tx_ring,
                      struct i40e_fdir_filter *fdata, bool add)
{
        struct i40e_filter_program_desc *fdir_desc;
        struct i40e_pf *pf = tx_ring->vsi->back;
        u32 flex_ptype, dtype_cmd;
        u16 i;

        /* grab the next descriptor */
        i = tx_ring->next_to_use;
        fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);

        i++;
        tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;

        flex_ptype = I40E_TXD_FLTR_QW0_QINDEX_MASK &
                     (fdata->q_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT);

        flex_ptype |= I40E_TXD_FLTR_QW0_FLEXOFF_MASK &
                      (fdata->flex_off << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT);

        flex_ptype |= I40E_TXD_FLTR_QW0_PCTYPE_MASK &
                      (fdata->pctype << I40E_TXD_FLTR_QW0_PCTYPE_SHIFT);

        /* Use LAN VSI Id if not programmed by user */
        flex_ptype |= I40E_TXD_FLTR_QW0_DEST_VSI_MASK &
                      ((u32)(fdata->dest_vsi ? : pf->vsi[pf->lan_vsi]->id) <<
                       I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT);

        dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG;

        dtype_cmd |= add ?
                     I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
                     I40E_TXD_FLTR_QW1_PCMD_SHIFT :
                     I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
                     I40E_TXD_FLTR_QW1_PCMD_SHIFT;

        dtype_cmd |= I40E_TXD_FLTR_QW1_DEST_MASK &
                     (fdata->dest_ctl << I40E_TXD_FLTR_QW1_DEST_SHIFT);

        dtype_cmd |= I40E_TXD_FLTR_QW1_FD_STATUS_MASK &
                     (fdata->fd_status << I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT);

        if (fdata->cnt_index) {
                dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK;
                dtype_cmd |= I40E_TXD_FLTR_QW1_CNTINDEX_MASK &
                             ((u32)fdata->cnt_index <<
                              I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT);
        }

        fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype);
        fdir_desc->rsvd = cpu_to_le32(0);
        fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd);
        fdir_desc->fd_id = cpu_to_le32(fdata->fd_id);
}

#define I40E_FD_CLEAN_DELAY 10
/**
 * i40e_program_fdir_filter - Program a Flow Director filter
 * @fdir_data: Packet data that will be filter parameters
 * @raw_packet: the pre-allocated packet buffer for FDir
 * @pf: The PF pointer
 * @add: True for add/update, False for remove
 **/
static int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data,
                                    u8 *raw_packet, struct i40e_pf *pf,
                                    bool add)
{
        struct i40e_tx_buffer *tx_buf, *first;
        struct i40e_tx_desc *tx_desc;
        struct i40e_ring *tx_ring;
        struct i40e_vsi *vsi;
        struct device *dev;
        dma_addr_t dma;
        u32 td_cmd = 0;
        u16 i;

        /* find existing FDIR VSI */
        vsi = i40e_find_vsi_by_type(pf, I40E_VSI_FDIR);
        if (!vsi)
                return -ENOENT;

        tx_ring = vsi->tx_rings[0];
        dev = tx_ring->dev;

        /* we need two descriptors to add/del a filter and we can wait */
        for (i = I40E_FD_CLEAN_DELAY; I40E_DESC_UNUSED(tx_ring) < 2; i--) {
                if (!i)
                        return -EAGAIN;
                msleep_interruptible(1);
        }

        dma = dma_map_single(dev, raw_packet,
                             I40E_FDIR_MAX_RAW_PACKET_SIZE, DMA_TO_DEVICE);
        if (dma_mapping_error(dev, dma))
                goto dma_fail;

        /* grab the next descriptor */
        i = tx_ring->next_to_use;
        first = &tx_ring->tx_bi[i];
        i40e_fdir(tx_ring, fdir_data, add);

        /* Now program a dummy descriptor */
        i = tx_ring->next_to_use;
        tx_desc = I40E_TX_DESC(tx_ring, i);
        tx_buf = &tx_ring->tx_bi[i];

        tx_ring->next_to_use = ((i + 1) < tx_ring->count) ? i + 1 : 0;

        memset(tx_buf, 0, sizeof(struct i40e_tx_buffer));

        /* record length, and DMA address */
        dma_unmap_len_set(tx_buf, len, I40E_FDIR_MAX_RAW_PACKET_SIZE);
        dma_unmap_addr_set(tx_buf, dma, dma);

        tx_desc->buffer_addr = cpu_to_le64(dma);
        td_cmd = I40E_TXD_CMD | I40E_TX_DESC_CMD_DUMMY;

        tx_buf->tx_flags = I40E_TX_FLAGS_FD_SB;
        tx_buf->raw_buf = (void *)raw_packet;

        tx_desc->cmd_type_offset_bsz =
                build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_SIZE, 0);

        /* Force memory writes to complete before letting h/w
         * know there are new descriptors to fetch.
         */
        wmb();

        /* Mark the data descriptor to be watched */
        first->next_to_watch = tx_desc;

        writel(tx_ring->next_to_use, tx_ring->tail);
        return 0;

dma_fail:
        return -1;
}

/**
 * i40e_create_dummy_packet - Constructs dummy packet for HW
 * @dummy_packet: preallocated space for dummy packet
 * @ipv4: is layer 3 packet of version 4 or 6
 * @l4proto: next level protocol used in data portion of l3
 * @data: filter data
 *
 * Returns address of layer 4 protocol dummy packet.
 **/
static char *i40e_create_dummy_packet(u8 *dummy_packet, bool ipv4, u8 l4proto,
                                      struct i40e_fdir_filter *data)
{
        bool is_vlan = !!data->vlan_tag;
        struct vlan_hdr vlan = {};
        struct ipv6hdr ipv6 = {};
        struct ethhdr eth = {};
        struct iphdr ip = {};
        u8 *tmp;

        if (ipv4) {
                eth.h_proto = cpu_to_be16(ETH_P_IP);
                ip.protocol = l4proto;
                ip.version = 0x4;
                ip.ihl = 0x5;

                ip.daddr = data->dst_ip;
                ip.saddr = data->src_ip;
        } else {
                eth.h_proto = cpu_to_be16(ETH_P_IPV6);
                ipv6.nexthdr = l4proto;
                ipv6.version = 0x6;

                memcpy(&ipv6.saddr.in6_u.u6_addr32, data->src_ip6,
                       sizeof(__be32) * 4);
                memcpy(&ipv6.daddr.in6_u.u6_addr32, data->dst_ip6,
                       sizeof(__be32) * 4);
        }

        if (is_vlan) {
                vlan.h_vlan_TCI = data->vlan_tag;
                vlan.h_vlan_encapsulated_proto = eth.h_proto;
                eth.h_proto = data->vlan_etype;
        }

        tmp = dummy_packet;
        memcpy(tmp, &eth, sizeof(eth));
        tmp += sizeof(eth);

        if (is_vlan) {
                memcpy(tmp, &vlan, sizeof(vlan));
                tmp += sizeof(vlan);
        }

        if (ipv4) {
                memcpy(tmp, &ip, sizeof(ip));
                tmp += sizeof(ip);
        } else {
                memcpy(tmp, &ipv6, sizeof(ipv6));
                tmp += sizeof(ipv6);
        }

        return tmp;
}

/**
 * i40e_create_dummy_udp_packet - helper function to create UDP packet
 * @raw_packet: preallocated space for dummy packet
 * @ipv4: is layer 3 packet of version 4 or 6
 * @l4proto: next level protocol used in data portion of l3
 * @data: filter data
 *
 * Helper function to populate udp fields.
 **/
static void i40e_create_dummy_udp_packet(u8 *raw_packet, bool ipv4, u8 l4proto,
                                         struct i40e_fdir_filter *data)
{
        struct udphdr *udp;
        u8 *tmp;

        tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_UDP, data);
        udp = (struct udphdr *)(tmp);
        udp->dest = data->dst_port;
        udp->source = data->src_port;
}

/**
 * i40e_create_dummy_tcp_packet - helper function to create TCP packet
 * @raw_packet: preallocated space for dummy packet
 * @ipv4: is layer 3 packet of version 4 or 6
 * @l4proto: next level protocol used in data portion of l3
 * @data: filter data
 *
 * Helper function to populate tcp fields.
 **/
static void i40e_create_dummy_tcp_packet(u8 *raw_packet, bool ipv4, u8 l4proto,
                                         struct i40e_fdir_filter *data)
{
        struct tcphdr *tcp;
        u8 *tmp;
        /* Dummy tcp packet */
        static const char tcp_packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
                0x50, 0x11, 0x0, 0x72, 0, 0, 0, 0};

        tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_TCP, data);

        tcp = (struct tcphdr *)tmp;
        memcpy(tcp, tcp_packet, sizeof(tcp_packet));
        tcp->dest = data->dst_port;
        tcp->source = data->src_port;
}

/**
 * i40e_create_dummy_sctp_packet - helper function to create SCTP packet
 * @raw_packet: preallocated space for dummy packet
 * @ipv4: is layer 3 packet of version 4 or 6
 * @l4proto: next level protocol used in data portion of l3
 * @data: filter data
 *
 * Helper function to populate sctp fields.
 **/
static void i40e_create_dummy_sctp_packet(u8 *raw_packet, bool ipv4,
                                          u8 l4proto,
                                          struct i40e_fdir_filter *data)
{
        struct sctphdr *sctp;
        u8 *tmp;

        tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_SCTP, data);

        sctp = (struct sctphdr *)tmp;
        sctp->dest = data->dst_port;
        sctp->source = data->src_port;
}

/**
 * i40e_prepare_fdir_filter - Prepare and program fdir filter
 * @pf: physical function to attach filter to
 * @fd_data: filter data
 * @add: add or delete filter
 * @packet_addr: address of dummy packet, used in filtering
 * @payload_offset: offset from dummy packet address to user defined data
 * @pctype: Packet type for which filter is used
 *
 * Helper function to offset data of dummy packet, program it and
 * handle errors.
 **/
static int i40e_prepare_fdir_filter(struct i40e_pf *pf,
                                    struct i40e_fdir_filter *fd_data,
                                    bool add, char *packet_addr,
                                    int payload_offset, u8 pctype)
{
        int ret;

        if (fd_data->flex_filter) {
                u8 *payload;
                __be16 pattern = fd_data->flex_word;
                u16 off = fd_data->flex_offset;

                payload = packet_addr + payload_offset;

                /* If user provided vlan, offset payload by vlan header length */
                if (!!fd_data->vlan_tag)
                        payload += VLAN_HLEN;

                *((__force __be16 *)(payload + off)) = pattern;
        }

        fd_data->pctype = pctype;
        ret = i40e_program_fdir_filter(fd_data, packet_addr, pf, add);
        if (ret) {
                dev_info(&pf->pdev->dev,
                         "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
                         fd_data->pctype, fd_data->fd_id, ret);
                /* Free the packet buffer since it wasn't added to the ring */
                return -EOPNOTSUPP;
        } else if (I40E_DEBUG_FD & pf->hw.debug_mask) {
                if (add)
                        dev_info(&pf->pdev->dev,
                                 "Filter OK for PCTYPE %d loc = %d\n",
                                 fd_data->pctype, fd_data->fd_id);
                else
                        dev_info(&pf->pdev->dev,
                                 "Filter deleted for PCTYPE %d loc = %d\n",
                                 fd_data->pctype, fd_data->fd_id);
        }

        return ret;
}

/**
 * i40e_change_filter_num - Prepare and program fdir filter
 * @ipv4: is layer 3 packet of version 4 or 6
 * @add: add or delete filter
 * @ipv4_filter_num: field to update
 * @ipv6_filter_num: field to update
 *
 * Update filter number field for pf.
 **/
static void i40e_change_filter_num(bool ipv4, bool add, u16 *ipv4_filter_num,
                                   u16 *ipv6_filter_num)
{
        if (add) {
                if (ipv4)
                        (*ipv4_filter_num)++;
                else
                        (*ipv6_filter_num)++;
        } else {
                if (ipv4)
                        (*ipv4_filter_num)--;
                else
                        (*ipv6_filter_num)--;
        }
}

#define I40E_UDPIP_DUMMY_PACKET_LEN     42
#define I40E_UDPIP6_DUMMY_PACKET_LEN    62
/**
 * i40e_add_del_fdir_udp - Add/Remove UDP filters
 * @vsi: pointer to the targeted VSI
 * @fd_data: the flow director data required for the FDir descriptor
 * @add: true adds a filter, false removes it
 * @ipv4: true is v4, false is v6
 *
 * Returns 0 if the filters were successfully added or removed
 **/
static int i40e_add_del_fdir_udp(struct i40e_vsi *vsi,
                                 struct i40e_fdir_filter *fd_data,
                                 bool add,
                                 bool ipv4)
{
        struct i40e_pf *pf = vsi->back;
        u8 *raw_packet;
        int ret;

        raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
        if (!raw_packet)
                return -ENOMEM;

        i40e_create_dummy_udp_packet(raw_packet, ipv4, IPPROTO_UDP, fd_data);

        if (ipv4)
                ret = i40e_prepare_fdir_filter
                        (pf, fd_data, add, raw_packet,
                         I40E_UDPIP_DUMMY_PACKET_LEN,
                         I40E_FILTER_PCTYPE_NONF_IPV4_UDP);
        else
                ret = i40e_prepare_fdir_filter
                        (pf, fd_data, add, raw_packet,
                         I40E_UDPIP6_DUMMY_PACKET_LEN,
                         I40E_FILTER_PCTYPE_NONF_IPV6_UDP);

        if (ret) {
                kfree(raw_packet);
                return ret;
        }

        i40e_change_filter_num(ipv4, add, &pf->fd_udp4_filter_cnt,
                               &pf->fd_udp6_filter_cnt);

        return 0;
}

#define I40E_TCPIP_DUMMY_PACKET_LEN     54
#define I40E_TCPIP6_DUMMY_PACKET_LEN    74
/**
 * i40e_add_del_fdir_tcp - Add/Remove TCPv4 filters
 * @vsi: pointer to the targeted VSI
 * @fd_data: the flow director data required for the FDir descriptor
 * @add: true adds a filter, false removes it
 * @ipv4: true is v4, false is v6
 *
 * Returns 0 if the filters were successfully added or removed
 **/
static int i40e_add_del_fdir_tcp(struct i40e_vsi *vsi,
                                 struct i40e_fdir_filter *fd_data,
                                 bool add,
                                 bool ipv4)
{
        struct i40e_pf *pf = vsi->back;
        u8 *raw_packet;
        int ret;

        raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
        if (!raw_packet)
                return -ENOMEM;

        i40e_create_dummy_tcp_packet(raw_packet, ipv4, IPPROTO_TCP, fd_data);
        if (ipv4)
                ret = i40e_prepare_fdir_filter
                        (pf, fd_data, add, raw_packet,
                         I40E_TCPIP_DUMMY_PACKET_LEN,
                         I40E_FILTER_PCTYPE_NONF_IPV4_TCP);
        else
                ret = i40e_prepare_fdir_filter
                        (pf, fd_data, add, raw_packet,
                         I40E_TCPIP6_DUMMY_PACKET_LEN,
                         I40E_FILTER_PCTYPE_NONF_IPV6_TCP);

        if (ret) {
                kfree(raw_packet);
                return ret;
        }

        i40e_change_filter_num(ipv4, add, &pf->fd_tcp4_filter_cnt,
                               &pf->fd_tcp6_filter_cnt);

        if (add) {
                if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
                    I40E_DEBUG_FD & pf->hw.debug_mask)
                        dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n");
                set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state);
        }
        return 0;
}

#define I40E_SCTPIP_DUMMY_PACKET_LEN    46
#define I40E_SCTPIP6_DUMMY_PACKET_LEN   66
/**
 * i40e_add_del_fdir_sctp - Add/Remove SCTPv4 Flow Director filters for
 * a specific flow spec
 * @vsi: pointer to the targeted VSI
 * @fd_data: the flow director data required for the FDir descriptor
 * @add: true adds a filter, false removes it
 * @ipv4: true is v4, false is v6
 *
 * Returns 0 if the filters were successfully added or removed
 **/
static int i40e_add_del_fdir_sctp(struct i40e_vsi *vsi,
                                  struct i40e_fdir_filter *fd_data,
                                  bool add,
                                  bool ipv4)
{
        struct i40e_pf *pf = vsi->back;
        u8 *raw_packet;
        int ret;

        raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
        if (!raw_packet)
                return -ENOMEM;

        i40e_create_dummy_sctp_packet(raw_packet, ipv4, IPPROTO_SCTP, fd_data);

        if (ipv4)
                ret = i40e_prepare_fdir_filter
                        (pf, fd_data, add, raw_packet,
                         I40E_SCTPIP_DUMMY_PACKET_LEN,
                         I40E_FILTER_PCTYPE_NONF_IPV4_SCTP);
        else
                ret = i40e_prepare_fdir_filter
                        (pf, fd_data, add, raw_packet,
                         I40E_SCTPIP6_DUMMY_PACKET_LEN,
                         I40E_FILTER_PCTYPE_NONF_IPV6_SCTP);

        if (ret) {
                kfree(raw_packet);
                return ret;
        }

        i40e_change_filter_num(ipv4, add, &pf->fd_sctp4_filter_cnt,
                               &pf->fd_sctp6_filter_cnt);

        return 0;
}

#define I40E_IP_DUMMY_PACKET_LEN        34
#define I40E_IP6_DUMMY_PACKET_LEN       54
/**
 * i40e_add_del_fdir_ip - Add/Remove IPv4 Flow Director filters for
 * a specific flow spec
 * @vsi: pointer to the targeted VSI
 * @fd_data: the flow director data required for the FDir descriptor
 * @add: true adds a filter, false removes it
 * @ipv4: true is v4, false is v6
 *
 * Returns 0 if the filters were successfully added or removed
 **/
static int i40e_add_del_fdir_ip(struct i40e_vsi *vsi,
                                struct i40e_fdir_filter *fd_data,
                                bool add,
                                bool ipv4)
{
        struct i40e_pf *pf = vsi->back;
        int payload_offset;
        u8 *raw_packet;
        int iter_start;
        int iter_end;
        int ret;
        int i;

        if (ipv4) {
                iter_start = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
                iter_end = I40E_FILTER_PCTYPE_FRAG_IPV4;
        } else {
                iter_start = I40E_FILTER_PCTYPE_NONF_IPV6_OTHER;
                iter_end = I40E_FILTER_PCTYPE_FRAG_IPV6;
        }

        for (i = iter_start; i <= iter_end; i++) {
                raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
                if (!raw_packet)
                        return -ENOMEM;

                /* IPv6 no header option differs from IPv4 */
                (void)i40e_create_dummy_packet
                        (raw_packet, ipv4, (ipv4) ? IPPROTO_IP : IPPROTO_NONE,
                         fd_data);

                payload_offset = (ipv4) ? I40E_IP_DUMMY_PACKET_LEN :
                        I40E_IP6_DUMMY_PACKET_LEN;
                ret = i40e_prepare_fdir_filter(pf, fd_data, add, raw_packet,
                                               payload_offset, i);
                if (ret)
                        goto err;
        }

        i40e_change_filter_num(ipv4, add, &pf->fd_ip4_filter_cnt,
                               &pf->fd_ip6_filter_cnt);

        return 0;
err:
        kfree(raw_packet);
        return ret;
}

/**
 * i40e_add_del_fdir - Build raw packets to add/del fdir filter
 * @vsi: pointer to the targeted VSI
 * @input: filter to add or delete
 * @add: true adds a filter, false removes it
 *
 **/
int i40e_add_del_fdir(struct i40e_vsi *vsi,
                      struct i40e_fdir_filter *input, bool add)
{
        enum ip_ver { ipv6 = 0, ipv4 = 1 };
        struct i40e_pf *pf = vsi->back;
        int ret;

        switch (input->flow_type & ~FLOW_EXT) {
        case TCP_V4_FLOW:
                ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv4);
                break;
        case UDP_V4_FLOW:
                ret = i40e_add_del_fdir_udp(vsi, input, add, ipv4);
                break;
        case SCTP_V4_FLOW:
                ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv4);
                break;
        case TCP_V6_FLOW:
                ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv6);
                break;
        case UDP_V6_FLOW:
                ret = i40e_add_del_fdir_udp(vsi, input, add, ipv6);
                break;
        case SCTP_V6_FLOW:
                ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv6);
                break;
        case IP_USER_FLOW:
                switch (input->ipl4_proto) {
                case IPPROTO_TCP:
                        ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv4);
                        break;
                case IPPROTO_UDP:
                        ret = i40e_add_del_fdir_udp(vsi, input, add, ipv4);
                        break;
                case IPPROTO_SCTP:
                        ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv4);
                        break;
                case IPPROTO_IP:
                        ret = i40e_add_del_fdir_ip(vsi, input, add, ipv4);
                        break;
                default:
                        /* We cannot support masking based on protocol */
                        dev_info(&pf->pdev->dev, "Unsupported IPv4 protocol 0x%02x\n",
                                 input->ipl4_proto);
                        return -EINVAL;
                }
                break;
        case IPV6_USER_FLOW:
                switch (input->ipl4_proto) {
                case IPPROTO_TCP:
                        ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv6);
                        break;
                case IPPROTO_UDP:
                        ret = i40e_add_del_fdir_udp(vsi, input, add, ipv6);
                        break;
                case IPPROTO_SCTP:
                        ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv6);
                        break;
                case IPPROTO_IP:
                        ret = i40e_add_del_fdir_ip(vsi, input, add, ipv6);
                        break;
                default:
                        /* We cannot support masking based on protocol */
                        dev_info(&pf->pdev->dev, "Unsupported IPv6 protocol 0x%02x\n",
                                 input->ipl4_proto);
                        return -EINVAL;
                }
                break;
        default:
                dev_info(&pf->pdev->dev, "Unsupported flow type 0x%02x\n",
                         input->flow_type);
                return -EINVAL;
        }

        /* The buffer allocated here will be normally be freed by
         * i40e_clean_fdir_tx_irq() as it reclaims resources after transmit
         * completion. In the event of an error adding the buffer to the FDIR
         * ring, it will immediately be freed. It may also be freed by
         * i40e_clean_tx_ring() when closing the VSI.
         */
        return ret;
}

/**
 * i40e_fd_handle_status - check the Programming Status for FD
 * @rx_ring: the Rx ring for this descriptor
 * @qword0_raw: qword0
 * @qword1: qword1 after le_to_cpu
 * @prog_id: the id originally used for programming
 *
 * This is used to verify if the FD programming or invalidation
 * requested by SW to the HW is successful or not and take actions accordingly.
 **/
static void i40e_fd_handle_status(struct i40e_ring *rx_ring, u64 qword0_raw,
                                  u64 qword1, u8 prog_id)
{
        struct i40e_pf *pf = rx_ring->vsi->back;
        struct pci_dev *pdev = pf->pdev;
        struct i40e_16b_rx_wb_qw0 *qw0;
        u32 fcnt_prog, fcnt_avail;
        u32 error;

        qw0 = (struct i40e_16b_rx_wb_qw0 *)&qword0_raw;
        error = (qword1 & I40E_RX_PROG_STATUS_DESC_QW1_ERROR_MASK) >>
                I40E_RX_PROG_STATUS_DESC_QW1_ERROR_SHIFT;

        if (error == BIT(I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT)) {
                pf->fd_inv = le32_to_cpu(qw0->hi_dword.fd_id);
                if (qw0->hi_dword.fd_id != 0 ||
                    (I40E_DEBUG_FD & pf->hw.debug_mask))
                        dev_warn(&pdev->dev, "ntuple filter loc = %d, could not be added\n",
                                 pf->fd_inv);

                /* Check if the programming error is for ATR.
                 * If so, auto disable ATR and set a state for
                 * flush in progress. Next time we come here if flush is in
                 * progress do nothing, once flush is complete the state will
                 * be cleared.
                 */
                if (test_bit(__I40E_FD_FLUSH_REQUESTED, pf->state))
                        return;

                pf->fd_add_err++;
                /* store the current atr filter count */
                pf->fd_atr_cnt = i40e_get_current_atr_cnt(pf);

                if (qw0->hi_dword.fd_id == 0 &&
                    test_bit(__I40E_FD_SB_AUTO_DISABLED, pf->state)) {
                        /* These set_bit() calls aren't atomic with the
                         * test_bit() here, but worse case we potentially
                         * disable ATR and queue a flush right after SB
                         * support is re-enabled. That shouldn't cause an
                         * issue in practice
                         */
                        set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state);
                        set_bit(__I40E_FD_FLUSH_REQUESTED, pf->state);
                }

                /* filter programming failed most likely due to table full */
                fcnt_prog = i40e_get_global_fd_count(pf);
                fcnt_avail = pf->fdir_pf_filter_count;
                /* If ATR is running fcnt_prog can quickly change,
                 * if we are very close to full, it makes sense to disable
                 * FD ATR/SB and then re-enable it when there is room.
                 */
                if (fcnt_prog >= (fcnt_avail - I40E_FDIR_BUFFER_FULL_MARGIN)) {
                        if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) &&
                            !test_and_set_bit(__I40E_FD_SB_AUTO_DISABLED,
                                              pf->state))
                                if (I40E_DEBUG_FD & pf->hw.debug_mask)
                                        dev_warn(&pdev->dev, "FD filter space full, new ntuple rules will not be added\n");
                }
        } else if (error == BIT(I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) {
                if (I40E_DEBUG_FD & pf->hw.debug_mask)
                        dev_info(&pdev->dev, "ntuple filter fd_id = %d, could not be removed\n",
                                 qw0->hi_dword.fd_id);
        }
}

/**
 * i40e_unmap_and_free_tx_resource - Release a Tx buffer
 * @ring:      the ring that owns the buffer
 * @tx_buffer: the buffer to free
 **/
static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
                                            struct i40e_tx_buffer *tx_buffer)
{
        if (tx_buffer->skb) {
                if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
                        kfree(tx_buffer->raw_buf);
                else if (ring_is_xdp(ring))
                        xdp_return_frame(tx_buffer->xdpf);
                else
                        dev_kfree_skb_any(tx_buffer->skb);
                if (dma_unmap_len(tx_buffer, len))
                        dma_unmap_single(ring->dev,
                                         dma_unmap_addr(tx_buffer, dma),
                                         dma_unmap_len(tx_buffer, len),
                                         DMA_TO_DEVICE);
        } else if (dma_unmap_len(tx_buffer, len)) {
                dma_unmap_page(ring->dev,
                               dma_unmap_addr(tx_buffer, dma),
                               dma_unmap_len(tx_buffer, len),
                               DMA_TO_DEVICE);
        }

        tx_buffer->next_to_watch = NULL;
        tx_buffer->skb = NULL;
        dma_unmap_len_set(tx_buffer, len, 0);
        /* tx_buffer must be completely set up in the transmit path */
}

/**
 * i40e_clean_tx_ring - Free any empty Tx buffers
 * @tx_ring: ring to be cleaned
 **/
void i40e_clean_tx_ring(struct i40e_ring *tx_ring)
{
        unsigned long bi_size;
        u16 i;

        if (ring_is_xdp(tx_ring) && tx_ring->xsk_pool) {
                i40e_xsk_clean_tx_ring(tx_ring);
        } else {
                /* ring already cleared, nothing to do */
                if (!tx_ring->tx_bi)
                        return;

                /* Free all the Tx ring sk_buffs */
                for (i = 0; i < tx_ring->count; i++)
                        i40e_unmap_and_free_tx_resource(tx_ring,
                                                        &tx_ring->tx_bi[i]);
        }

        bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count;
        memset(tx_ring->tx_bi, 0, bi_size);

        /* Zero out the descriptor ring */
        memset(tx_ring->desc, 0, tx_ring->size);

        tx_ring->next_to_use = 0;
        tx_ring->next_to_clean = 0;

        if (!tx_ring->netdev)
                return;

        /* cleanup Tx queue statistics */
        netdev_tx_reset_queue(txring_txq(tx_ring));
}

/**
 * i40e_free_tx_resources - Free Tx resources per queue
 * @tx_ring: Tx descriptor ring for a specific queue
 *
 * Free all transmit software resources
 **/
void i40e_free_tx_resources(struct i40e_ring *tx_ring)
{
        i40e_clean_tx_ring(tx_ring);
        kfree(tx_ring->tx_bi);
        tx_ring->tx_bi = NULL;

        if (tx_ring->desc) {
                dma_free_coherent(tx_ring->dev, tx_ring->size,
                                  tx_ring->desc, tx_ring->dma);
                tx_ring->desc = NULL;
        }
}

/**
 * i40e_get_tx_pending - how many tx descriptors not processed
 * @ring: the ring of descriptors
 * @in_sw: use SW variables
 *
 * Since there is no access to the ring head register
 * in XL710, we need to use our local copies
 **/
u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw)
{
        u32 head, tail;

        if (!in_sw) {
                head = i40e_get_head(ring);
                tail = readl(ring->tail);
        } else {
                head = ring->next_to_clean;
                tail = ring->next_to_use;
        }

        if (head != tail)
                return (head < tail) ?
                        tail - head : (tail + ring->count - head);

        return 0;
}

/**
 * i40e_detect_recover_hung - Function to detect and recover hung_queues
 * @vsi:  pointer to vsi struct with tx queues
 *
 * VSI has netdev and netdev has TX queues. This function is to check each of
 * those TX queues if they are hung, trigger recovery by issuing SW interrupt.
 **/
void i40e_detect_recover_hung(struct i40e_vsi *vsi)
{
        struct i40e_ring *tx_ring = NULL;
        struct net_device *netdev;
        unsigned int i;
        int packets;

        if (!vsi)
                return;

        if (test_bit(__I40E_VSI_DOWN, vsi->state))
                return;

        netdev = vsi->netdev;
        if (!netdev)
                return;

        if (!netif_carrier_ok(netdev))
                return;

        for (i = 0; i < vsi->num_queue_pairs; i++) {
                tx_ring = vsi->tx_rings[i];
                if (tx_ring && tx_ring->desc) {
                        /* If packet counter has not changed the queue is
                         * likely stalled, so force an interrupt for this
                         * queue.
                         *
                         * prev_pkt_ctr would be negative if there was no
                         * pending work.
                         */
                        packets = tx_ring->stats.packets & INT_MAX;
                        if (tx_ring->tx_stats.prev_pkt_ctr == packets) {
                                i40e_force_wb(vsi, tx_ring->q_vector);
                                continue;
                        }

                        /* Memory barrier between read of packet count and call
                         * to i40e_get_tx_pending()
                         */
                        smp_rmb();
                        tx_ring->tx_stats.prev_pkt_ctr =
                            i40e_get_tx_pending(tx_ring, true) ? packets : -1;
                }
        }
}

/**
 * i40e_clean_tx_irq - Reclaim resources after transmit completes
 * @vsi: the VSI we care about
 * @tx_ring: Tx ring to clean
 * @napi_budget: Used to determine if we are in netpoll
 * @tx_cleaned: Out parameter set to the number of TXes cleaned
 *
 * Returns true if there's any budget left (e.g. the clean is finished)
 **/
static bool i40e_clean_tx_irq(struct i40e_vsi *vsi,
                              struct i40e_ring *tx_ring, int napi_budget,
                              unsigned int *tx_cleaned)
{
        int i = tx_ring->next_to_clean;
        struct i40e_tx_buffer *tx_buf;
        struct i40e_tx_desc *tx_head;
        struct i40e_tx_desc *tx_desc;
        unsigned int total_bytes = 0, total_packets = 0;
        unsigned int budget = vsi->work_limit;

        tx_buf = &tx_ring->tx_bi[i];
        tx_desc = I40E_TX_DESC(tx_ring, i);
        i -= tx_ring->count;

        tx_head = I40E_TX_DESC(tx_ring, i40e_get_head(tx_ring));

        do {
                struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch;

                /* if next_to_watch is not set then there is no work pending */
                if (!eop_desc)
                        break;

                /* prevent any other reads prior to eop_desc */
                smp_rmb();

                i40e_trace(clean_tx_irq, tx_ring, tx_desc, tx_buf);
                /* we have caught up to head, no work left to do */
                if (tx_head == tx_desc)
                        break;

                /* clear next_to_watch to prevent false hangs */
                tx_buf->next_to_watch = NULL;

                /* update the statistics for this packet */
                total_bytes += tx_buf->bytecount;
                total_packets += tx_buf->gso_segs;

                /* free the skb/XDP data */
                if (ring_is_xdp(tx_ring))
                        xdp_return_frame(tx_buf->xdpf);
                else
                        napi_consume_skb(tx_buf->skb, napi_budget);

                /* unmap skb header data */
                dma_unmap_single(tx_ring->dev,
                                 dma_unmap_addr(tx_buf, dma),
                                 dma_unmap_len(tx_buf, len),
                                 DMA_TO_DEVICE);

                /* clear tx_buffer data */
                tx_buf->skb = NULL;
                dma_unmap_len_set(tx_buf, len, 0);

                /* unmap remaining buffers */
                while (tx_desc != eop_desc) {
                        i40e_trace(clean_tx_irq_unmap,
                                   tx_ring, tx_desc, tx_buf);

                        tx_buf++;
                        tx_desc++;
                        i++;
                        if (unlikely(!i)) {
                                i -= tx_ring->count;
                                tx_buf = tx_ring->tx_bi;
                                tx_desc = I40E_TX_DESC(tx_ring, 0);
                        }

                        /* unmap any remaining paged data */
                        if (dma_unmap_len(tx_buf, len)) {
                                dma_unmap_page(tx_ring->dev,
                                               dma_unmap_addr(tx_buf, dma),
                                               dma_unmap_len(tx_buf, len),
                                               DMA_TO_DEVICE);
                                dma_unmap_len_set(tx_buf, len, 0);
                        }
                }

                /* move us one more past the eop_desc for start of next pkt */
                tx_buf++;
                tx_desc++;
                i++;
                if (unlikely(!i)) {
                        i -= tx_ring->count;
                        tx_buf = tx_ring->tx_bi;
                        tx_desc = I40E_TX_DESC(tx_ring, 0);
                }

                prefetch(tx_desc);

                /* update budget accounting */
                budget--;
        } while (likely(budget));

        i += tx_ring->count;
        tx_ring->next_to_clean = i;
        i40e_update_tx_stats(tx_ring, total_packets, total_bytes);
        i40e_arm_wb(tx_ring, vsi, budget);

        if (ring_is_xdp(tx_ring))
                return !!budget;

        /* notify netdev of completed buffers */
        netdev_tx_completed_queue(txring_txq(tx_ring),
                                  total_packets, total_bytes);

#define TX_WAKE_THRESHOLD ((s16)(DESC_NEEDED * 2))
        if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) &&
                     (I40E_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
                /* Make sure that anybody stopping the queue after this
                 * sees the new next_to_clean.
                 */
                smp_mb();
                if (__netif_subqueue_stopped(tx_ring->netdev,
                                             tx_ring->queue_index) &&
                   !test_bit(__I40E_VSI_DOWN, vsi->state)) {
                        netif_wake_subqueue(tx_ring->netdev,
                                            tx_ring->queue_index);
                        ++tx_ring->tx_stats.restart_queue;
                }
        }

        *tx_cleaned = total_packets;
        return !!budget;
}

/**
 * i40e_enable_wb_on_itr - Arm hardware to do a wb, interrupts are not enabled
 * @vsi: the VSI we care about
 * @q_vector: the vector on which to enable writeback
 *
 **/
static void i40e_enable_wb_on_itr(struct i40e_vsi *vsi,
                                  struct i40e_q_vector *q_vector)
{
        u16 flags = q_vector->tx.ring[0].flags;
        u32 val;

        if (!(flags & I40E_TXR_FLAGS_WB_ON_ITR))
                return;

        if (q_vector->arm_wb_state)
                return;

        if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
                val = I40E_PFINT_DYN_CTLN_WB_ON_ITR_MASK |
                      I40E_PFINT_DYN_CTLN_ITR_INDX_MASK; /* set noitr */

                wr32(&vsi->back->hw,
                     I40E_PFINT_DYN_CTLN(q_vector->reg_idx),
                     val);
        } else {
                val = I40E_PFINT_DYN_CTL0_WB_ON_ITR_MASK |
                      I40E_PFINT_DYN_CTL0_ITR_INDX_MASK; /* set noitr */

                wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val);
        }
        q_vector->arm_wb_state = true;
}

/**
 * i40e_force_wb - Issue SW Interrupt so HW does a wb
 * @vsi: the VSI we care about
 * @q_vector: the vector  on which to force writeback
 *
 **/
void i40e_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector)
{
        if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
                u32 val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
                          I40E_PFINT_DYN_CTLN_ITR_INDX_MASK | /* set noitr */
                          I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK |
                          I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK;
                          /* allow 00 to be written to the index */

                wr32(&vsi->back->hw,
                     I40E_PFINT_DYN_CTLN(q_vector->reg_idx), val);
        } else {
                u32 val = I40E_PFINT_DYN_CTL0_INTENA_MASK |
                          I40E_PFINT_DYN_CTL0_ITR_INDX_MASK | /* set noitr */
                          I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK |
                          I40E_PFINT_DYN_CTL0_SW_ITR_INDX_ENA_MASK;
                        /* allow 00 to be written to the index */

                wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val);
        }
}

static inline bool i40e_container_is_rx(struct i40e_q_vector *q_vector,
                                        struct i40e_ring_container *rc)
{
        return &q_vector->rx == rc;
}

static inline unsigned int i40e_itr_divisor(struct i40e_q_vector *q_vector)
{
        unsigned int divisor;

        switch (q_vector->vsi->back->hw.phy.link_info.link_speed) {
        case I40E_LINK_SPEED_40GB:
                divisor = I40E_ITR_ADAPTIVE_MIN_INC * 1024;
                break;
        case I40E_LINK_SPEED_25GB:
        case I40E_LINK_SPEED_20GB:
                divisor = I40E_ITR_ADAPTIVE_MIN_INC * 512;
                break;
        default:
        case I40E_LINK_SPEED_10GB:
                divisor = I40E_ITR_ADAPTIVE_MIN_INC * 256;
                break;
        case I40E_LINK_SPEED_1GB:
        case I40E_LINK_SPEED_100MB:
                divisor = I40E_ITR_ADAPTIVE_MIN_INC * 32;
                break;
        }

        return divisor;
}

/**
 * i40e_update_itr - update the dynamic ITR value based on statistics
 * @q_vector: structure containing interrupt and ring information
 * @rc: structure containing ring performance data
 *
 * Stores a new ITR value based on packets and byte
 * counts during the last interrupt.  The advantage of per interrupt
 * computation is faster updates and more accurate ITR for the current
 * traffic pattern.  Constants in this function were computed
 * based on theoretical maximum wire speed and thresholds were set based
 * on testing data as well as attempting to minimize response time
 * while increasing bulk throughput.
 **/
static void i40e_update_itr(struct i40e_q_vector *q_vector,
                            struct i40e_ring_container *rc)
{
        unsigned int avg_wire_size, packets, bytes, itr;
        unsigned long next_update = jiffies;

        /* If we don't have any rings just leave ourselves set for maximum
         * possible latency so we take ourselves out of the equation.
         */
        if (!rc->ring || !ITR_IS_DYNAMIC(rc->ring->itr_setting))
                return;

        /* For Rx we want to push the delay up and default to low latency.
         * for Tx we want to pull the delay down and default to high latency.
         */
        itr = i40e_container_is_rx(q_vector, rc) ?
              I40E_ITR_ADAPTIVE_MIN_USECS | I40E_ITR_ADAPTIVE_LATENCY :
              I40E_ITR_ADAPTIVE_MAX_USECS | I40E_ITR_ADAPTIVE_LATENCY;

        /* If we didn't update within up to 1 - 2 jiffies we can assume
         * that either packets are coming in so slow there hasn't been
         * any work, or that there is so much work that NAPI is dealing
         * with interrupt moderation and we don't need to do anything.
         */
        if (time_after(next_update, rc->next_update))
                goto clear_counts;

        /* If itr_countdown is set it means we programmed an ITR within
         * the last 4 interrupt cycles. This has a side effect of us
         * potentially firing an early interrupt. In order to work around
         * this we need to throw out any data received for a few
         * interrupts following the update.
         */
        if (q_vector->itr_countdown) {
                itr = rc->target_itr;
                goto clear_counts;
        }

        packets = rc->total_packets;
        bytes = rc->total_bytes;

        if (i40e_container_is_rx(q_vector, rc)) {
                /* If Rx there are 1 to 4 packets and bytes are less than
                 * 9000 assume insufficient data to use bulk rate limiting
                 * approach unless Tx is already in bulk rate limiting. We
                 * are likely latency driven.
                 */
                if (packets && packets < 4 && bytes < 9000 &&
                    (q_vector->tx.target_itr & I40E_ITR_ADAPTIVE_LATENCY)) {
                        itr = I40E_ITR_ADAPTIVE_LATENCY;
                        goto adjust_by_size;
                }
        } else if (packets < 4) {
                /* If we have Tx and Rx ITR maxed and Tx ITR is running in
                 * bulk mode and we are receiving 4 or fewer packets just
                 * reset the ITR_ADAPTIVE_LATENCY bit for latency mode so
                 * that the Rx can relax.
                 */
                if (rc->target_itr == I40E_ITR_ADAPTIVE_MAX_USECS &&
                    (q_vector->rx.target_itr & I40E_ITR_MASK) ==
                     I40E_ITR_ADAPTIVE_MAX_USECS)
                        goto clear_counts;
        } else if (packets > 32) {
                /* If we have processed over 32 packets in a single interrupt
                 * for Tx assume we need to switch over to "bulk" mode.
                 */
                rc->target_itr &= ~I40E_ITR_ADAPTIVE_LATENCY;
        }

        /* We have no packets to actually measure against. This means
         * either one of the other queues on this vector is active or
         * we are a Tx queue doing TSO with too high of an interrupt rate.
         *
         * Between 4 and 56 we can assume that our current interrupt delay
         * is only slightly too low. As such we should increase it by a small
         * fixed amount.
         */
        if (packets < 56) {
                itr = rc->target_itr + I40E_ITR_ADAPTIVE_MIN_INC;
                if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) {
                        itr &= I40E_ITR_ADAPTIVE_LATENCY;
                        itr += I40E_ITR_ADAPTIVE_MAX_USECS;
                }
                goto clear_counts;
        }

        if (packets <= 256) {
                itr = min(q_vector->tx.current_itr, q_vector->rx.current_itr);
                itr &= I40E_ITR_MASK;

                /* Between 56 and 112 is our "goldilocks" zone where we are
                 * working out "just right". Just report that our current
                 * ITR is good for us.
                 */
                if (packets <= 112)
                        goto clear_counts;

                /* If packet count is 128 or greater we are likely looking
                 * at a slight overrun of the delay we want. Try halving
                 * our delay to see if that will cut the number of packets
                 * in half per interrupt.
                 */
                itr /= 2;
                itr &= I40E_ITR_MASK;
                if (itr < I40E_ITR_ADAPTIVE_MIN_USECS)
                        itr = I40E_ITR_ADAPTIVE_MIN_USECS;

                goto clear_counts;
        }

        /* The paths below assume we are dealing with a bulk ITR since
         * number of packets is greater than 256. We are just going to have
         * to compute a value and try to bring the count under control,
         * though for smaller packet sizes there isn't much we can do as
         * NAPI polling will likely be kicking in sooner rather than later.
         */
        itr = I40E_ITR_ADAPTIVE_BULK;

adjust_by_size:
        /* If packet counts are 256 or greater we can assume we have a gross
         * overestimation of what the rate should be. Instead of trying to fine
         * tune it just use the formula below to try and dial in an exact value
         * give the current packet size of the frame.
         */
        avg_wire_size = bytes / packets;

        /* The following is a crude approximation of:
         *  wmem_default / (size + overhead) = desired_pkts_per_int
         *  rate / bits_per_byte / (size + ethernet overhead) = pkt_rate
         *  (desired_pkt_rate / pkt_rate) * usecs_per_sec = ITR value
         *
         * Assuming wmem_default is 212992 and overhead is 640 bytes per
         * packet, (256 skb, 64 headroom, 320 shared info), we can reduce the
         * formula down to
         *
         *  (170 * (size + 24)) / (size + 640) = ITR
         *
         * We first do some math on the packet size and then finally bitshift
         * by 8 after rounding up. We also have to account for PCIe link speed
         * difference as ITR scales based on this.
         */
        if (avg_wire_size <= 60) {
                /* Start at 250k ints/sec */
                avg_wire_size = 4096;
        } else if (avg_wire_size <= 380) {
                /* 250K ints/sec to 60K ints/sec */
                avg_wire_size *= 40;
                avg_wire_size += 1696;
        } else if (avg_wire_size <= 1084) {
                /* 60K ints/sec to 36K ints/sec */
                avg_wire_size *= 15;
                avg_wire_size += 11452;
        } else if (avg_wire_size <= 1980) {
                /* 36K ints/sec to 30K ints/sec */
                avg_wire_size *= 5;
                avg_wire_size += 22420;
        } else {
                /* plateau at a limit of 30K ints/sec */
                avg_wire_size = 32256;
        }

        /* If we are in low latency mode halve our delay which doubles the
         * rate to somewhere between 100K to 16K ints/sec
         */
        if (itr & I40E_ITR_ADAPTIVE_LATENCY)
                avg_wire_size /= 2;

        /* Resultant value is 256 times larger than it needs to be. This
         * gives us room to adjust the value as needed to either increase
         * or decrease the value based on link speeds of 10G, 2.5G, 1G, etc.
         *
         * Use addition as we have already recorded the new latency flag
         * for the ITR value.
         */
        itr += DIV_ROUND_UP(avg_wire_size, i40e_itr_divisor(q_vector)) *
               I40E_ITR_ADAPTIVE_MIN_INC;

        if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) {
                itr &= I40E_ITR_ADAPTIVE_LATENCY;
                itr += I40E_ITR_ADAPTIVE_MAX_USECS;
        }

clear_counts:
        /* write back value */
        rc->target_itr = itr;

        /* next update should occur within next jiffy */
        rc->next_update = next_update + 1;

        rc->total_bytes = 0;
        rc->total_packets = 0;
}

static struct i40e_rx_buffer *i40e_rx_bi(struct i40e_ring *rx_ring, u32 idx)
{
        return &rx_ring->rx_bi[idx];
}

/**
 * i40e_reuse_rx_page - page flip buffer and store it back on the ring
 * @rx_ring: rx descriptor ring to store buffers on
 * @old_buff: donor buffer to have page reused
 *
 * Synchronizes page for reuse by the adapter
 **/
static void i40e_reuse_rx_page(struct i40e_ring *rx_ring,
                               struct i40e_rx_buffer *old_buff)
{
        struct i40e_rx_buffer *new_buff;
        u16 nta = rx_ring->next_to_alloc;

        new_buff = i40e_rx_bi(rx_ring, nta);

        /* update, and store next to alloc */
        nta++;
        rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;

        /* transfer page from old buffer to new buffer */
        new_buff->dma           = old_buff->dma;
        new_buff->page          = old_buff->page;
        new_buff->page_offset   = old_buff->page_offset;
        new_buff->pagecnt_bias  = old_buff->pagecnt_bias;

        /* clear contents of buffer_info */
        old_buff->page = NULL;
}

/**
 * i40e_clean_programming_status - clean the programming status descriptor
 * @rx_ring: the rx ring that has this descriptor
 * @qword0_raw: qword0
 * @qword1: qword1 representing status_error_len in CPU ordering
 *
 * Flow director should handle FD_FILTER_STATUS to check its filter programming
 * status being successful or not and take actions accordingly. FCoE should
 * handle its context/filter programming/invalidation status and take actions.
 *
 * Returns an i40e_rx_buffer to reuse if the cleanup occurred, otherwise NULL.
 **/
void i40e_clean_programming_status(struct i40e_ring *rx_ring, u64 qword0_raw,
                                   u64 qword1)
{
        u8 id;

        id = (qword1 & I40E_RX_PROG_STATUS_DESC_QW1_PROGID_MASK) >>
                  I40E_RX_PROG_STATUS_DESC_QW1_PROGID_SHIFT;

        if (id == I40E_RX_PROG_STATUS_DESC_FD_FILTER_STATUS)
                i40e_fd_handle_status(rx_ring, qword0_raw, qword1, id);
}

/**
 * i40e_setup_tx_descriptors - Allocate the Tx descriptors
 * @tx_ring: the tx ring to set up
 *
 * Return 0 on success, negative on error
 **/
int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring)
{
        struct device *dev = tx_ring->dev;
        int bi_size;

        if (!dev)
                return -ENOMEM;

        /* warn if we are about to overwrite the pointer */
        WARN_ON(tx_ring->tx_bi);
        bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count;
        tx_ring->tx_bi = kzalloc(bi_size, GFP_KERNEL);
        if (!tx_ring->tx_bi)
                goto err;

        u64_stats_init(&tx_ring->syncp);

        /* round up to nearest 4K */
        tx_ring->size = tx_ring->count * sizeof(struct i40e_tx_desc);
        /* add u32 for head writeback, align after this takes care of
         * guaranteeing this is at least one cache line in size
         */
        tx_ring->size += sizeof(u32);
        tx_ring->size = ALIGN(tx_ring->size, 4096);
        tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
                                           &tx_ring->dma, GFP_KERNEL);
        if (!tx_ring->desc) {
                dev_info(dev, "Unable to allocate memory for the Tx descriptor ring, size=%d\n",
                         tx_ring->size);
                goto err;
        }

        tx_ring->next_to_use = 0;
        tx_ring->next_to_clean = 0;
        tx_ring->tx_stats.prev_pkt_ctr = -1;
        return 0;

err:
        kfree(tx_ring->tx_bi);
        tx_ring->tx_bi = NULL;
        return -ENOMEM;
}

static void i40e_clear_rx_bi(struct i40e_ring *rx_ring)
{
        memset(rx_ring->rx_bi, 0, sizeof(*rx_ring->rx_bi) * rx_ring->count);
}

/**
 * i40e_clean_rx_ring - Free Rx buffers
 * @rx_ring: ring to be cleaned
 **/
void i40e_clean_rx_ring(struct i40e_ring *rx_ring)
{
        u16 i;

        /* ring already cleared, nothing to do */
        if (!rx_ring->rx_bi)
                return;

        if (rx_ring->xsk_pool) {
                i40e_xsk_clean_rx_ring(rx_ring);
                goto skip_free;
        }

        /* Free all the Rx ring sk_buffs */
        for (i = 0; i < rx_ring->count; i++) {
                struct i40e_rx_buffer *rx_bi = i40e_rx_bi(rx_ring, i);

                if (!rx_bi->page)
                        continue;

                /* Invalidate cache lines that may have been written to by
                 * device so that we avoid corrupting memory.
                 */
                dma_sync_single_range_for_cpu(rx_ring->dev,
                                              rx_bi->dma,
                                              rx_bi->page_offset,
                                              rx_ring->rx_buf_len,
                                              DMA_FROM_DEVICE);

                /* free resources associated with mapping */
                dma_unmap_page_attrs(rx_ring->dev, rx_bi->dma,
                                     i40e_rx_pg_size(rx_ring),
                                     DMA_FROM_DEVICE,
                                     I40E_RX_DMA_ATTR);

                __page_frag_cache_drain(rx_bi->page, rx_bi->pagecnt_bias);

                rx_bi->page = NULL;
                rx_bi->page_offset = 0;
        }

skip_free:
        if (rx_ring->xsk_pool)
                i40e_clear_rx_bi_zc(rx_ring);
        else
                i40e_clear_rx_bi(rx_ring);

        /* Zero out the descriptor ring */
        memset(rx_ring->desc, 0, rx_ring->size);

        rx_ring->next_to_alloc = 0;
        rx_ring->next_to_clean = 0;
        rx_ring->next_to_process = 0;
        rx_ring->next_to_use = 0;
}

/**
 * i40e_free_rx_resources - Free Rx resources
 * @rx_ring: ring to clean the resources from
 *
 * Free all receive software resources
 **/
void i40e_free_rx_resources(struct i40e_ring *rx_ring)
{
        i40e_clean_rx_ring(rx_ring);
        if (rx_ring->vsi->type == I40E_VSI_MAIN)
                xdp_rxq_info_unreg(&rx_ring->xdp_rxq);
        rx_ring->xdp_prog = NULL;
        kfree(rx_ring->rx_bi);
        rx_ring->rx_bi = NULL;

        if (rx_ring->desc) {
                dma_free_coherent(rx_ring->dev, rx_ring->size,
                                  rx_ring->desc, rx_ring->dma);
                rx_ring->desc = NULL;
        }
}

/**
 * i40e_setup_rx_descriptors - Allocate Rx descriptors
 * @rx_ring: Rx descriptor ring (for a specific queue) to setup
 *
 * Returns 0 on success, negative on failure
 **/
int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring)
{
        struct device *dev = rx_ring->dev;
        int err;

        u64_stats_init(&rx_ring->syncp);

        /* Round up to nearest 4K */
        rx_ring->size = rx_ring->count * sizeof(union i40e_rx_desc);
        rx_ring->size = ALIGN(rx_ring->size, 4096);
        rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
                                           &rx_ring->dma, GFP_KERNEL);

        if (!rx_ring->desc) {
                dev_info(dev, "Unable to allocate memory for the Rx descriptor ring, size=%d\n",
                         rx_ring->size);
                return -ENOMEM;
        }

        rx_ring->next_to_alloc = 0;
        rx_ring->next_to_clean = 0;
        rx_ring->next_to_process = 0;
        rx_ring->next_to_use = 0;

        /* XDP RX-queue info only needed for RX rings exposed to XDP */
        if (rx_ring->vsi->type == I40E_VSI_MAIN) {
                err = xdp_rxq_info_reg(&rx_ring->xdp_rxq, rx_ring->netdev,
                                       rx_ring->queue_index, rx_ring->q_vector->napi.napi_id);
                if (err < 0)
                        return err;
        }

        rx_ring->xdp_prog = rx_ring->vsi->xdp_prog;

        rx_ring->rx_bi =
                kcalloc(rx_ring->count, sizeof(*rx_ring->rx_bi), GFP_KERNEL);
        if (!rx_ring->rx_bi)
                return -ENOMEM;

        return 0;
}

/**
 * i40e_release_rx_desc - Store the new tail and head values
 * @rx_ring: ring to bump
 * @val: new head index
 **/
void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val)
{
        rx_ring->next_to_use = val;

        /* update next to alloc since we have filled the ring */
        rx_ring->next_to_alloc = val;

        /* Force memory writes to complete before letting h/w
         * know there are new descriptors to fetch.  (Only
         * applicable for weak-ordered memory model archs,
         * such as IA-64).
         */
        wmb();
        writel(val, rx_ring->tail);
}

#if (PAGE_SIZE >= 8192)
static unsigned int i40e_rx_frame_truesize(struct i40e_ring *rx_ring,
                                           unsigned int size)
{
        unsigned int truesize;

        truesize = rx_ring->rx_offset ?
                SKB_DATA_ALIGN(size + rx_ring->rx_offset) +
                SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
                SKB_DATA_ALIGN(size);
        return truesize;
}
#endif

/**
 * i40e_alloc_mapped_page - recycle or make a new page
 * @rx_ring: ring to use
 * @bi: rx_buffer struct to modify
 *
 * Returns true if the page was successfully allocated or
 * reused.
 **/
static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
                                   struct i40e_rx_buffer *bi)
{
        struct page *page = bi->page;
        dma_addr_t dma;

        /* since we are recycling buffers we should seldom need to alloc */
        if (likely(page)) {
                rx_ring->rx_stats.page_reuse_count++;
                return true;
        }

        /* alloc new page for storage */
        page = dev_alloc_pages(i40e_rx_pg_order(rx_ring));
        if (unlikely(!page)) {
                rx_ring->rx_stats.alloc_page_failed++;
                return false;
        }

        rx_ring->rx_stats.page_alloc_count++;

        /* map page for use */
        dma = dma_map_page_attrs(rx_ring->dev, page, 0,
                                 i40e_rx_pg_size(rx_ring),
                                 DMA_FROM_DEVICE,
                                 I40E_RX_DMA_ATTR);

        /* if mapping failed free memory back to system since
         * there isn't much point in holding memory we can't use
         */
        if (dma_mapping_error(rx_ring->dev, dma)) {
                __free_pages(page, i40e_rx_pg_order(rx_ring));
                rx_ring->rx_stats.alloc_page_failed++;
                return false;
        }

        bi->dma = dma;
        bi->page = page;
        bi->page_offset = rx_ring->rx_offset;
        page_ref_add(page, USHRT_MAX - 1);
        bi->pagecnt_bias = USHRT_MAX;

        return true;
}

/**
 * i40e_alloc_rx_buffers - Replace used receive buffers
 * @rx_ring: ring to place buffers on
 * @cleaned_count: number of buffers to replace
 *
 * Returns false if all allocations were successful, true if any fail
 **/
bool i40e_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count)
{
        u16 ntu = rx_ring->next_to_use;
        union i40e_rx_desc *rx_desc;
        struct i40e_rx_buffer *bi;

        /* do nothing if no valid netdev defined */
        if (!rx_ring->netdev || !cleaned_count)
                return false;

        rx_desc = I40E_RX_DESC(rx_ring, ntu);
        bi = i40e_rx_bi(rx_ring, ntu);

        do {
                if (!i40e_alloc_mapped_page(rx_ring, bi))
                        goto no_buffers;

                /* sync the buffer for use by the device */
                dma_sync_single_range_for_device(rx_ring->dev, bi->dma,
                                                 bi->page_offset,
                                                 rx_ring->rx_buf_len,
                                                 DMA_FROM_DEVICE);

                /* Refresh the desc even if buffer_addrs didn't change
                 * because each write-back erases this info.
                 */
                rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset);

                rx_desc++;
                bi++;
                ntu++;
                if (unlikely(ntu == rx_ring->count)) {
                        rx_desc = I40E_RX_DESC(rx_ring, 0);
                        bi = i40e_rx_bi(rx_ring, 0);
                        ntu = 0;
                }

                /* clear the status bits for the next_to_use descriptor */
                rx_desc->wb.qword1.status_error_len = 0;

                cleaned_count--;
        } while (cleaned_count);

        if (rx_ring->next_to_use != ntu)
                i40e_release_rx_desc(rx_ring, ntu);

        return false;

no_buffers:
        if (rx_ring->next_to_use != ntu)
                i40e_release_rx_desc(rx_ring, ntu);

        /* make sure to come back via polling to try again after
         * allocation failure
         */
        return true;
}

/**
 * i40e_rx_checksum - Indicate in skb if hw indicated a good cksum
 * @vsi: the VSI we care about
 * @skb: skb currently being received and modified
 * @rx_desc: the receive descriptor
 **/
static inline void i40e_rx_checksum(struct i40e_vsi *vsi,
                                    struct sk_buff *skb,
                                    union i40e_rx_desc *rx_desc)
{
        struct i40e_rx_ptype_decoded decoded;
        u32 rx_error, rx_status;
        bool ipv4, ipv6;
        u8 ptype;
        u64 qword;

        qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
        ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >> I40E_RXD_QW1_PTYPE_SHIFT;
        rx_error = (qword & I40E_RXD_QW1_ERROR_MASK) >>
                   I40E_RXD_QW1_ERROR_SHIFT;
        rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
                    I40E_RXD_QW1_STATUS_SHIFT;
        decoded = decode_rx_desc_ptype(ptype);

        skb->ip_summed = CHECKSUM_NONE;

        skb_checksum_none_assert(skb);

        /* Rx csum enabled and ip headers found? */
        if (!(vsi->netdev->features & NETIF_F_RXCSUM))
                return;

        /* did the hardware decode the packet and checksum? */
        if (!(rx_status & BIT(I40E_RX_DESC_STATUS_L3L4P_SHIFT)))
                return;

        /* both known and outer_ip must be set for the below code to work */
        if (!(decoded.known && decoded.outer_ip))
                return;

        ipv4 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) &&
               (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV4);
        ipv6 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) &&
               (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV6);

        if (ipv4 &&
            (rx_error & (BIT(I40E_RX_DESC_ERROR_IPE_SHIFT) |
                         BIT(I40E_RX_DESC_ERROR_EIPE_SHIFT))))
                goto checksum_fail;

        /* likely incorrect csum if alternate IP extension headers found */
        if (ipv6 &&
            rx_status & BIT(I40E_RX_DESC_STATUS_IPV6EXADD_SHIFT))
                /* don't increment checksum err here, non-fatal err */
                return;

        /* there was some L4 error, count error and punt packet to the stack */
        if (rx_error & BIT(I40E_RX_DESC_ERROR_L4E_SHIFT))
                goto checksum_fail;

        /* handle packets that were not able to be checksummed due
         * to arrival speed, in this case the stack can compute
         * the csum.
         */
        if (rx_error & BIT(I40E_RX_DESC_ERROR_PPRS_SHIFT))
                return;

        /* If there is an outer header present that might contain a checksum
         * we need to bump the checksum level by 1 to reflect the fact that
         * we are indicating we validated the inner checksum.
         */
        if (decoded.tunnel_type >= I40E_RX_PTYPE_TUNNEL_IP_GRENAT)
                skb->csum_level = 1;

        /* Only report checksum unnecessary for TCP, UDP, or SCTP */
        switch (decoded.inner_prot) {
        case I40E_RX_PTYPE_INNER_PROT_TCP:
        case I40E_RX_PTYPE_INNER_PROT_UDP:
        case I40E_RX_PTYPE_INNER_PROT_SCTP:
                skb->ip_summed = CHECKSUM_UNNECESSARY;
                fallthrough;
        default:
                break;
        }

        return;

checksum_fail:
        vsi->back->hw_csum_rx_error++;
}

/**
 * i40e_ptype_to_htype - get a hash type
 * @ptype: the ptype value from the descriptor
 *
 * Returns a hash type to be used by skb_set_hash
 **/
static inline int i40e_ptype_to_htype(u8 ptype)
{
        struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(ptype);

        if (!decoded.known)
                return PKT_HASH_TYPE_NONE;

        if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
            decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY4)
                return PKT_HASH_TYPE_L4;
        else if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
                 decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY3)
                return PKT_HASH_TYPE_L3;
        else
                return PKT_HASH_TYPE_L2;
}

/**
 * i40e_rx_hash - set the hash value in the skb
 * @ring: descriptor ring
 * @rx_desc: specific descriptor
 * @skb: skb currently being received and modified
 * @rx_ptype: Rx packet type
 **/
static inline void i40e_rx_hash(struct i40e_ring *ring,
                                union i40e_rx_desc *rx_desc,
                                struct sk_buff *skb,
                                u8 rx_ptype)
{
        u32 hash;
        const __le64 rss_mask =
                cpu_to_le64((u64)I40E_RX_DESC_FLTSTAT_RSS_HASH <<
                            I40E_RX_DESC_STATUS_FLTSTAT_SHIFT);

        if (!(ring->netdev->features & NETIF_F_RXHASH))
                return;

        if ((rx_desc->wb.qword1.status_error_len & rss_mask) == rss_mask) {
                hash = le32_to_cpu(rx_desc->wb.qword0.hi_dword.rss);
                skb_set_hash(skb, hash, i40e_ptype_to_htype(rx_ptype));
        }
}

/**
 * i40e_process_skb_fields - Populate skb header fields from Rx descriptor
 * @rx_ring: rx descriptor ring packet is being transacted on
 * @rx_desc: pointer to the EOP Rx descriptor
 * @skb: pointer to current skb being populated
 *
 * This function checks the ring, descriptor, and packet information in
 * order to populate the hash, checksum, VLAN, protocol, and
 * other fields within the skb.
 **/
void i40e_process_skb_fields(struct i40e_ring *rx_ring,
                             union i40e_rx_desc *rx_desc, struct sk_buff *skb)
{
        u64 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
        u32 rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
                        I40E_RXD_QW1_STATUS_SHIFT;
        u32 tsynvalid = rx_status & I40E_RXD_QW1_STATUS_TSYNVALID_MASK;
        u32 tsyn = (rx_status & I40E_RXD_QW1_STATUS_TSYNINDX_MASK) >>
                   I40E_RXD_QW1_STATUS_TSYNINDX_SHIFT;
        u8 rx_ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >>
                      I40E_RXD_QW1_PTYPE_SHIFT;

        if (unlikely(tsynvalid))
                i40e_ptp_rx_hwtstamp(rx_ring->vsi->back, skb, tsyn);

        i40e_rx_hash(rx_ring, rx_desc, skb, rx_ptype);

        i40e_rx_checksum(rx_ring->vsi, skb, rx_desc);

        skb_record_rx_queue(skb, rx_ring->queue_index);

        if (qword & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)) {
                __le16 vlan_tag = rx_desc->wb.qword0.lo_dword.l2tag1;

                __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
                                       le16_to_cpu(vlan_tag));
        }

        /* modifies the skb - consumes the enet header */
        skb->protocol = eth_type_trans(skb, rx_ring->netdev);
}

/**
 * i40e_cleanup_headers - Correct empty headers
 * @rx_ring: rx descriptor ring packet is being transacted on
 * @skb: pointer to current skb being fixed
 * @rx_desc: pointer to the EOP Rx descriptor
 *
 * In addition if skb is not at least 60 bytes we need to pad it so that
 * it is large enough to qualify as a valid Ethernet frame.
 *
 * Returns true if an error was encountered and skb was freed.
 **/
static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb,
                                 union i40e_rx_desc *rx_desc)

{
        /* ERR_MASK will only have valid bits if EOP set, and
         * what we are doing here is actually checking
         * I40E_RX_DESC_ERROR_RXE_SHIFT, since it is the zeroth bit in
         * the error field
         */
        if (unlikely(i40e_test_staterr(rx_desc,
                                       BIT(I40E_RXD_QW1_ERROR_SHIFT)))) {
                dev_kfree_skb_any(skb);
                return true;
        }

        /* if eth_skb_pad returns an error the skb was freed */
        if (eth_skb_pad(skb))
                return true;

        return false;
}

/**
 * i40e_can_reuse_rx_page - Determine if page can be reused for another Rx
 * @rx_buffer: buffer containing the page
 * @rx_stats: rx stats structure for the rx ring
 *
 * If page is reusable, we have a green light for calling i40e_reuse_rx_page,
 * which will assign the current buffer to the buffer that next_to_alloc is
 * pointing to; otherwise, the DMA mapping needs to be destroyed and
 * page freed.
 *
 * rx_stats will be updated to indicate whether the page was waived
 * or busy if it could not be reused.
 */
static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer,
                                   struct i40e_rx_queue_stats *rx_stats)
{
        unsigned int pagecnt_bias = rx_buffer->pagecnt_bias;
        struct page *page = rx_buffer->page;

        /* Is any reuse possible? */
        if (!dev_page_is_reusable(page)) {
                rx_stats->page_waive_count++;
                return false;
        }

#if (PAGE_SIZE < 8192)
        /* if we are only owner of page we can reuse it */
        if (unlikely((rx_buffer->page_count - pagecnt_bias) > 1)) {
                rx_stats->page_busy_count++;
                return false;
        }
#else
#define I40E_LAST_OFFSET \
        (SKB_WITH_OVERHEAD(PAGE_SIZE) - I40E_RXBUFFER_2048)
        if (rx_buffer->page_offset > I40E_LAST_OFFSET) {
                rx_stats->page_busy_count++;
                return false;
        }
#endif

        /* If we have drained the page fragment pool we need to update
         * the pagecnt_bias and page count so that we fully restock the
         * number of references the driver holds.
         */
        if (unlikely(pagecnt_bias == 1)) {
                page_ref_add(page, USHRT_MAX - 1);
                rx_buffer->pagecnt_bias = USHRT_MAX;
        }

        return true;
}

/**
 * i40e_rx_buffer_flip - adjusted rx_buffer to point to an unused region
 * @rx_buffer: Rx buffer to adjust
 * @truesize: Size of adjustment
 **/
static void i40e_rx_buffer_flip(struct i40e_rx_buffer *rx_buffer,
                                unsigned int truesize)
{
#if (PAGE_SIZE < 8192)
        rx_buffer->page_offset ^= truesize;
#else
        rx_buffer->page_offset += truesize;
#endif
}

/**
 * i40e_get_rx_buffer - Fetch Rx buffer and synchronize data for use
 * @rx_ring: rx descriptor ring to transact packets on
 * @size: size of buffer to add to skb
 *
 * This function will pull an Rx buffer from the ring and synchronize it
 * for use by the CPU.
 */
static struct i40e_rx_buffer *i40e_get_rx_buffer(struct i40e_ring *rx_ring,
                                                 const unsigned int size)
{
        struct i40e_rx_buffer *rx_buffer;

        rx_buffer = i40e_rx_bi(rx_ring, rx_ring->next_to_process);
        rx_buffer->page_count =
#if (PAGE_SIZE < 8192)
                page_count(rx_buffer->page);
#else
                0;
#endif
        prefetch_page_address(rx_buffer->page);

        /* we are reusing so sync this buffer for CPU use */
        dma_sync_single_range_for_cpu(rx_ring->dev,
                                      rx_buffer->dma,
                                      rx_buffer->page_offset,
                                      size,
                                      DMA_FROM_DEVICE);

        /* We have pulled a buffer for use, so decrement pagecnt_bias */
        rx_buffer->pagecnt_bias--;

        return rx_buffer;
}

/**
 * i40e_put_rx_buffer - Clean up used buffer and either recycle or free
 * @rx_ring: rx descriptor ring to transact packets on
 * @rx_buffer: rx buffer to pull data from
 *
 * This function will clean up the contents of the rx_buffer.  It will
 * either recycle the buffer or unmap it and free the associated resources.
 */
static void i40e_put_rx_buffer(struct i40e_ring *rx_ring,
                               struct i40e_rx_buffer *rx_buffer)
{
        if (i40e_can_reuse_rx_page(rx_buffer, &rx_ring->rx_stats)) {
                /* hand second half of page back to the ring */
                i40e_reuse_rx_page(rx_ring, rx_buffer);
        } else {
                /* we are not reusing the buffer so unmap it */
                dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma,
                                     i40e_rx_pg_size(rx_ring),
                                     DMA_FROM_DEVICE, I40E_RX_DMA_ATTR);
                __page_frag_cache_drain(rx_buffer->page,
                                        rx_buffer->pagecnt_bias);
                /* clear contents of buffer_info */
                rx_buffer->page = NULL;
        }
}

/**
 * i40e_process_rx_buffs- Processing of buffers post XDP prog or on error
 * @rx_ring: Rx descriptor ring to transact packets on
 * @xdp_res: Result of the XDP program
 * @xdp: xdp_buff pointing to the data
 **/
static void i40e_process_rx_buffs(struct i40e_ring *rx_ring, int xdp_res,
                                  struct xdp_buff *xdp)
{
        u32 next = rx_ring->next_to_clean;
        struct i40e_rx_buffer *rx_buffer;

        xdp->flags = 0;

        while (1) {
                rx_buffer = i40e_rx_bi(rx_ring, next);
                if (++next == rx_ring->count)
                        next = 0;

                if (!rx_buffer->page)
                        continue;

                if (xdp_res == I40E_XDP_CONSUMED)
                        rx_buffer->pagecnt_bias++;
                else
                        i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz);

                /* EOP buffer will be put in i40e_clean_rx_irq() */
                if (next == rx_ring->next_to_process)
                        return;

                i40e_put_rx_buffer(rx_ring, rx_buffer);
        }
}

/**
 * i40e_construct_skb - Allocate skb and populate it
 * @rx_ring: rx descriptor ring to transact packets on
 * @xdp: xdp_buff pointing to the data
 * @nr_frags: number of buffers for the packet
 *
 * This function allocates an skb.  It then populates it with the page
 * data from the current receive descriptor, taking care to set up the
 * skb correctly.
 */
static struct sk_buff *i40e_construct_skb(struct i40e_ring *rx_ring,
                                          struct xdp_buff *xdp,
                                          u32 nr_frags)
{
        unsigned int size = xdp->data_end - xdp->data;
        struct i40e_rx_buffer *rx_buffer;
        unsigned int headlen;
        struct sk_buff *skb;

        /* prefetch first cache line of first page */
        net_prefetch(xdp->data);

        /* Note, we get here by enabling legacy-rx via:
         *
         *    ethtool --set-priv-flags <dev> legacy-rx on
         *
         * In this mode, we currently get 0 extra XDP headroom as
         * opposed to having legacy-rx off, where we process XDP
         * packets going to stack via i40e_build_skb(). The latter
         * provides us currently with 192 bytes of headroom.
         *
         * For i40e_construct_skb() mode it means that the
         * xdp->data_meta will always point to xdp->data, since
         * the helper cannot expand the head. Should this ever
         * change in future for legacy-rx mode on, then lets also
         * add xdp->data_meta handling here.
         */

        /* allocate a skb to store the frags */
        skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
                               I40E_RX_HDR_SIZE,
                               GFP_ATOMIC | __GFP_NOWARN);
        if (unlikely(!skb))
                return NULL;

        /* Determine available headroom for copy */
        headlen = size;
        if (headlen > I40E_RX_HDR_SIZE)
                headlen = eth_get_headlen(skb->dev, xdp->data,
                                          I40E_RX_HDR_SIZE);

        /* align pull length to size of long to optimize memcpy performance */
        memcpy(__skb_put(skb, headlen), xdp->data,
               ALIGN(headlen, sizeof(long)));

        rx_buffer = i40e_rx_bi(rx_ring, rx_ring->next_to_clean);
        /* update all of the pointers */
        size -= headlen;
        if (size) {
                if (unlikely(nr_frags >= MAX_SKB_FRAGS)) {
                        dev_kfree_skb(skb);
                        return NULL;
                }
                skb_add_rx_frag(skb, 0, rx_buffer->page,
                                rx_buffer->page_offset + headlen,
                                size, xdp->frame_sz);
                /* buffer is used by skb, update page_offset */
                i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz);
        } else {
                /* buffer is unused, reset bias back to rx_buffer */
                rx_buffer->pagecnt_bias++;
        }

        if (unlikely(xdp_buff_has_frags(xdp))) {
                struct skb_shared_info *sinfo, *skinfo = skb_shinfo(skb);

                sinfo = xdp_get_shared_info_from_buff(xdp);
                memcpy(&skinfo->frags[skinfo->nr_frags], &sinfo->frags[0],
                       sizeof(skb_frag_t) * nr_frags);

                xdp_update_skb_shared_info(skb, skinfo->nr_frags + nr_frags,
                                           sinfo->xdp_frags_size,
                                           nr_frags * xdp->frame_sz,
                                           xdp_buff_is_frag_pfmemalloc(xdp));

                /* First buffer has already been processed, so bump ntc */
                if (++rx_ring->next_to_clean == rx_ring->count)
                        rx_ring->next_to_clean = 0;

                i40e_process_rx_buffs(rx_ring, I40E_XDP_PASS, xdp);
        }

        return skb;
}

/**
 * i40e_build_skb - Build skb around an existing buffer
 * @rx_ring: Rx descriptor ring to transact packets on
 * @xdp: xdp_buff pointing to the data
 * @nr_frags: number of buffers for the packet
 *
 * This function builds an skb around an existing Rx buffer, taking care
 * to set up the skb correctly and avoid any memcpy overhead.
 */
static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring,
                                      struct xdp_buff *xdp,
                                      u32 nr_frags)
{
        unsigned int metasize = xdp->data - xdp->data_meta;
        struct sk_buff *skb;

        /* Prefetch first cache line of first page. If xdp->data_meta
         * is unused, this points exactly as xdp->data, otherwise we
         * likely have a consumer accessing first few bytes of meta
         * data, and then actual data.
         */
        net_prefetch(xdp->data_meta);

        /* build an skb around the page buffer */
        skb = napi_build_skb(xdp->data_hard_start, xdp->frame_sz);
        if (unlikely(!skb))
                return NULL;

        /* update pointers within the skb to store the data */
        skb_reserve(skb, xdp->data - xdp->data_hard_start);
        __skb_put(skb, xdp->data_end - xdp->data);
        if (metasize)
                skb_metadata_set(skb, metasize);

        if (unlikely(xdp_buff_has_frags(xdp))) {
                struct skb_shared_info *sinfo;

                sinfo = xdp_get_shared_info_from_buff(xdp);
                xdp_update_skb_shared_info(skb, nr_frags,
                                           sinfo->xdp_frags_size,
                                           nr_frags * xdp->frame_sz,
                                           xdp_buff_is_frag_pfmemalloc(xdp));

                i40e_process_rx_buffs(rx_ring, I40E_XDP_PASS, xdp);
        } else {
                struct i40e_rx_buffer *rx_buffer;

                rx_buffer = i40e_rx_bi(rx_ring, rx_ring->next_to_clean);
                /* buffer is used by skb, update page_offset */
                i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz);
        }

        return skb;
}

/**
 * i40e_is_non_eop - process handling of non-EOP buffers
 * @rx_ring: Rx ring being processed
 * @rx_desc: Rx descriptor for current buffer
 *
 * If the buffer is an EOP buffer, this function exits returning false,
 * otherwise return true indicating that this is in fact a non-EOP buffer.
 */
bool i40e_is_non_eop(struct i40e_ring *rx_ring,
                     union i40e_rx_desc *rx_desc)
{
        /* if we are the last buffer then there is nothing else to do */
#define I40E_RXD_EOF BIT(I40E_RX_DESC_STATUS_EOF_SHIFT)
        if (likely(i40e_test_staterr(rx_desc, I40E_RXD_EOF)))
                return false;

        rx_ring->rx_stats.non_eop_descs++;

        return true;
}

static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf,
                              struct i40e_ring *xdp_ring);

int i40e_xmit_xdp_tx_ring(struct xdp_buff *xdp, struct i40e_ring *xdp_ring)
{
        struct xdp_frame *xdpf = xdp_convert_buff_to_frame(xdp);

        if (unlikely(!xdpf))
                return I40E_XDP_CONSUMED;

        return i40e_xmit_xdp_ring(xdpf, xdp_ring);
}

/**
 * i40e_run_xdp - run an XDP program
 * @rx_ring: Rx ring being processed
 * @xdp: XDP buffer containing the frame
 * @xdp_prog: XDP program to run
 **/
static int i40e_run_xdp(struct i40e_ring *rx_ring, struct xdp_buff *xdp, struct bpf_prog *xdp_prog)
{
        int err, result = I40E_XDP_PASS;
        struct i40e_ring *xdp_ring;
        u32 act;

        if (!xdp_prog)
                goto xdp_out;

        prefetchw(xdp->data_hard_start); /* xdp_frame write */

        act = bpf_prog_run_xdp(xdp_prog, xdp);
        switch (act) {
        case XDP_PASS:
                break;
        case XDP_TX:
                xdp_ring = rx_ring->vsi->xdp_rings[rx_ring->queue_index];
                result = i40e_xmit_xdp_tx_ring(xdp, xdp_ring);
                if (result == I40E_XDP_CONSUMED)
                        goto out_failure;
                break;
        case XDP_REDIRECT:
                err = xdp_do_redirect(rx_ring->netdev, xdp, xdp_prog);
                if (err)
                        goto out_failure;
                result = I40E_XDP_REDIR;
                break;
        default:
                bpf_warn_invalid_xdp_action(rx_ring->netdev, xdp_prog, act);
                fallthrough;
        case XDP_ABORTED:
out_failure:
                trace_xdp_exception(rx_ring->netdev, xdp_prog, act);
                fallthrough; /* handle aborts by dropping packet */
        case XDP_DROP:
                result = I40E_XDP_CONSUMED;
                break;
        }
xdp_out:
        return result;
}

/**
 * i40e_xdp_ring_update_tail - Updates the XDP Tx ring tail register
 * @xdp_ring: XDP Tx ring
 *
 * This function updates the XDP Tx ring tail register.
 **/
void i40e_xdp_ring_update_tail(struct i40e_ring *xdp_ring)
{
        /* Force memory writes to complete before letting h/w
         * know there are new descriptors to fetch.
         */
        wmb();
        writel_relaxed(xdp_ring->next_to_use, xdp_ring->tail);
}

/**
 * i40e_update_rx_stats - Update Rx ring statistics
 * @rx_ring: rx descriptor ring
 * @total_rx_bytes: number of bytes received
 * @total_rx_packets: number of packets received
 *
 * This function updates the Rx ring statistics.
 **/
void i40e_update_rx_stats(struct i40e_ring *rx_ring,
                          unsigned int total_rx_bytes,
                          unsigned int total_rx_packets)
{
        u64_stats_update_begin(&rx_ring->syncp);
        rx_ring->stats.packets += total_rx_packets;
        rx_ring->stats.bytes += total_rx_bytes;
        u64_stats_update_end(&rx_ring->syncp);
        rx_ring->q_vector->rx.total_packets += total_rx_packets;
        rx_ring->q_vector->rx.total_bytes += total_rx_bytes;
}

/**
 * i40e_finalize_xdp_rx - Bump XDP Tx tail and/or flush redirect map
 * @rx_ring: Rx ring
 * @xdp_res: Result of the receive batch
 *
 * This function bumps XDP Tx tail and/or flush redirect map, and
 * should be called when a batch of packets has been processed in the
 * napi loop.
 **/
void i40e_finalize_xdp_rx(struct i40e_ring *rx_ring, unsigned int xdp_res)
{
        if (xdp_res & I40E_XDP_REDIR)
                xdp_do_flush_map();

        if (xdp_res & I40E_XDP_TX) {
                struct i40e_ring *xdp_ring =
                        rx_ring->vsi->xdp_rings[rx_ring->queue_index];

                i40e_xdp_ring_update_tail(xdp_ring);
        }
}

/**
 * i40e_inc_ntp: Advance the next_to_process index
 * @rx_ring: Rx ring
 **/
static void i40e_inc_ntp(struct i40e_ring *rx_ring)
{
        u32 ntp = rx_ring->next_to_process + 1;

        ntp = (ntp < rx_ring->count) ? ntp : 0;
        rx_ring->next_to_process = ntp;
        prefetch(I40E_RX_DESC(rx_ring, ntp));
}

/**
 * i40e_add_xdp_frag: Add a frag to xdp_buff
 * @xdp: xdp_buff pointing to the data
 * @nr_frags: return number of buffers for the packet
 * @rx_buffer: rx_buffer holding data of the current frag
 * @size: size of data of current frag
 */
static int i40e_add_xdp_frag(struct xdp_buff *xdp, u32 *nr_frags,
                             struct i40e_rx_buffer *rx_buffer, u32 size)
{
        struct skb_shared_info *sinfo = xdp_get_shared_info_from_buff(xdp);

        if (!xdp_buff_has_frags(xdp)) {
                sinfo->nr_frags = 0;
                sinfo->xdp_frags_size = 0;
                xdp_buff_set_frags_flag(xdp);
        } else if (unlikely(sinfo->nr_frags >= MAX_SKB_FRAGS)) {
                /* Overflowing packet: All frags need to be dropped */
                return -ENOMEM;
        }

        __skb_fill_page_desc_noacc(sinfo, sinfo->nr_frags++, rx_buffer->page,
                                   rx_buffer->page_offset, size);

        sinfo->xdp_frags_size += size;

        if (page_is_pfmemalloc(rx_buffer->page))
                xdp_buff_set_frag_pfmemalloc(xdp);
        *nr_frags = sinfo->nr_frags;

        return 0;
}

/**
 * i40e_consume_xdp_buff - Consume all the buffers of the packet and update ntc
 * @rx_ring: rx descriptor ring to transact packets on
 * @xdp: xdp_buff pointing to the data
 * @rx_buffer: rx_buffer of eop desc
 */
static void i40e_consume_xdp_buff(struct i40e_ring *rx_ring,
                                  struct xdp_buff *xdp,
                                  struct i40e_rx_buffer *rx_buffer)
{
        i40e_process_rx_buffs(rx_ring, I40E_XDP_CONSUMED, xdp);
        i40e_put_rx_buffer(rx_ring, rx_buffer);
        rx_ring->next_to_clean = rx_ring->next_to_process;
        xdp->data = NULL;
}

/**
 * i40e_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf
 * @rx_ring: rx descriptor ring to transact packets on
 * @budget: Total limit on number of packets to process
 * @rx_cleaned: Out parameter of the number of packets processed
 *
 * This function provides a "bounce buffer" approach to Rx interrupt
 * processing.  The advantage to this is that on systems that have
 * expensive overhead for IOMMU access this provides a means of avoiding
 * it by maintaining the mapping of the page to the system.
 *
 * Returns amount of work completed
 **/
static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget,
                             unsigned int *rx_cleaned)
{
        unsigned int total_rx_bytes = 0, total_rx_packets = 0;
        u16 cleaned_count = I40E_DESC_UNUSED(rx_ring);
        u16 clean_threshold = rx_ring->count / 2;
        unsigned int offset = rx_ring->rx_offset;
        struct xdp_buff *xdp = &rx_ring->xdp;
        unsigned int xdp_xmit = 0;
        struct bpf_prog *xdp_prog;
        bool failure = false;
        int xdp_res = 0;

        xdp_prog = READ_ONCE(rx_ring->xdp_prog);

        while (likely(total_rx_packets < (unsigned int)budget)) {
                u16 ntp = rx_ring->next_to_process;
                struct i40e_rx_buffer *rx_buffer;
                union i40e_rx_desc *rx_desc;
                struct sk_buff *skb;
                unsigned int size;
                u32 nfrags = 0;
                bool neop;
                u64 qword;

                /* return some buffers to hardware, one at a time is too slow */
                if (cleaned_count >= clean_threshold) {
                        failure = failure ||
                                  i40e_alloc_rx_buffers(rx_ring, cleaned_count);
                        cleaned_count = 0;
                }

                rx_desc = I40E_RX_DESC(rx_ring, ntp);

                /* status_error_len will always be zero for unused descriptors
                 * because it's cleared in cleanup, and overlaps with hdr_addr
                 * which is always zero because packet split isn't used, if the
                 * hardware wrote DD then the length will be non-zero
                 */
                qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);

                /* This memory barrier is needed to keep us from reading
                 * any other fields out of the rx_desc until we have
                 * verified the descriptor has been written back.
                 */
                dma_rmb();

                if (i40e_rx_is_programming_status(qword)) {
                        i40e_clean_programming_status(rx_ring,
                                                      rx_desc->raw.qword[0],
                                                      qword);
                        rx_buffer = i40e_rx_bi(rx_ring, ntp);
                        i40e_inc_ntp(rx_ring);
                        i40e_reuse_rx_page(rx_ring, rx_buffer);
                        /* Update ntc and bump cleaned count if not in the
                         * middle of mb packet.
                         */
                        if (rx_ring->next_to_clean == ntp) {
                                rx_ring->next_to_clean =
                                        rx_ring->next_to_process;
                                cleaned_count++;
                        }
                        continue;
                }

                size = (qword & I40E_RXD_QW1_LENGTH_PBUF_MASK) >>
                       I40E_RXD_QW1_LENGTH_PBUF_SHIFT;
                if (!size)
                        break;

                i40e_trace(clean_rx_irq, rx_ring, rx_desc, xdp);
                /* retrieve a buffer from the ring */
                rx_buffer = i40e_get_rx_buffer(rx_ring, size);

                neop = i40e_is_non_eop(rx_ring, rx_desc);
                i40e_inc_ntp(rx_ring);

                if (!xdp->data) {
                        unsigned char *hard_start;

                        hard_start = page_address(rx_buffer->page) +
                                     rx_buffer->page_offset - offset;
                        xdp_prepare_buff(xdp, hard_start, offset, size, true);
#if (PAGE_SIZE > 4096)
                        /* At larger PAGE_SIZE, frame_sz depend on len size */
                        xdp->frame_sz = i40e_rx_frame_truesize(rx_ring, size);
#endif
                } else if (i40e_add_xdp_frag(xdp, &nfrags, rx_buffer, size) &&
                           !neop) {
                        /* Overflowing packet: Drop all frags on EOP */
                        i40e_consume_xdp_buff(rx_ring, xdp, rx_buffer);
                        break;
                }

                if (neop)
                        continue;

                xdp_res = i40e_run_xdp(rx_ring, xdp, xdp_prog);

                if (xdp_res) {
                        xdp_xmit |= xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR);

                        if (unlikely(xdp_buff_has_frags(xdp))) {
                                i40e_process_rx_buffs(rx_ring, xdp_res, xdp);
                                size = xdp_get_buff_len(xdp);
                        } else if (xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR)) {
                                i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz);
                        } else {
                                rx_buffer->pagecnt_bias++;
                        }
                        total_rx_bytes += size;
                } else {
                        if (ring_uses_build_skb(rx_ring))
                                skb = i40e_build_skb(rx_ring, xdp, nfrags);
                        else
                                skb = i40e_construct_skb(rx_ring, xdp, nfrags);

                        /* drop if we failed to retrieve a buffer */
                        if (!skb) {
                                rx_ring->rx_stats.alloc_buff_failed++;
                                i40e_consume_xdp_buff(rx_ring, xdp, rx_buffer);
                                break;
                        }

                        if (i40e_cleanup_headers(rx_ring, skb, rx_desc))
                                goto process_next;

                        /* probably a little skewed due to removing CRC */
                        total_rx_bytes += skb->len;

                        /* populate checksum, VLAN, and protocol */
                        i40e_process_skb_fields(rx_ring, rx_desc, skb);

                        i40e_trace(clean_rx_irq_rx, rx_ring, rx_desc, xdp);
                        napi_gro_receive(&rx_ring->q_vector->napi, skb);
                }

                /* update budget accounting */
                total_rx_packets++;
process_next:
                cleaned_count += nfrags + 1;
                i40e_put_rx_buffer(rx_ring, rx_buffer);
                rx_ring->next_to_clean = rx_ring->next_to_process;

                xdp->data = NULL;
        }

        i40e_finalize_xdp_rx(rx_ring, xdp_xmit);

        i40e_update_rx_stats(rx_ring, total_rx_bytes, total_rx_packets);

        *rx_cleaned = total_rx_packets;

        /* guarantee a trip back through this routine if there was a failure */
        return failure ? budget : (int)total_rx_packets;
}

static inline u32 i40e_buildreg_itr(const int type, u16 itr)
{
        u32 val;

        /* We don't bother with setting the CLEARPBA bit as the data sheet
         * points out doing so is "meaningless since it was already
         * auto-cleared". The auto-clearing happens when the interrupt is
         * asserted.
         *
         * Hardware errata 28 for also indicates that writing to a
         * xxINT_DYN_CTLx CSR with INTENA_MSK (bit 31) set to 0 will clear
         * an event in the PBA anyway so we need to rely on the automask
         * to hold pending events for us until the interrupt is re-enabled
         *
         * The itr value is reported in microseconds, and the register
         * value is recorded in 2 microsecond units. For this reason we
         * only need to shift by the interval shift - 1 instead of the
         * full value.
         */
        itr &= I40E_ITR_MASK;

        val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
              (type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) |
              (itr << (I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT - 1));

        return val;
}

/* a small macro to shorten up some long lines */
#define INTREG I40E_PFINT_DYN_CTLN

/* The act of updating the ITR will cause it to immediately trigger. In order
 * to prevent this from throwing off adaptive update statistics we defer the
 * update so that it can only happen so often. So after either Tx or Rx are
 * updated we make the adaptive scheme wait until either the ITR completely
 * expires via the next_update expiration or we have been through at least
 * 3 interrupts.
 */
#define ITR_COUNTDOWN_START 3

/**
 * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt
 * @vsi: the VSI we care about
 * @q_vector: q_vector for which itr is being updated and interrupt enabled
 *
 **/
static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
                                          struct i40e_q_vector *q_vector)
{
        struct i40e_hw *hw = &vsi->back->hw;
        u32 intval;

        /* If we don't have MSIX, then we only need to re-enable icr0 */
        if (!(vsi->back->flags & I40E_FLAG_MSIX_ENABLED)) {
                i40e_irq_dynamic_enable_icr0(vsi->back);
                return;
        }

        /* These will do nothing if dynamic updates are not enabled */
        i40e_update_itr(q_vector, &q_vector->tx);
        i40e_update_itr(q_vector, &q_vector->rx);

        /* This block of logic allows us to get away with only updating
         * one ITR value with each interrupt. The idea is to perform a
         * pseudo-lazy update with the following criteria.
         *
         * 1. Rx is given higher priority than Tx if both are in same state
         * 2. If we must reduce an ITR that is given highest priority.
         * 3. We then give priority to increasing ITR based on amount.
         */
        if (q_vector->rx.target_itr < q_vector->rx.current_itr) {
                /* Rx ITR needs to be reduced, this is highest priority */
                intval = i40e_buildreg_itr(I40E_RX_ITR,
                                           q_vector->rx.target_itr);
                q_vector->rx.current_itr = q_vector->rx.target_itr;
                q_vector->itr_countdown = ITR_COUNTDOWN_START;
        } else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) ||
                   ((q_vector->rx.target_itr - q_vector->rx.current_itr) <
                    (q_vector->tx.target_itr - q_vector->tx.current_itr))) {
                /* Tx ITR needs to be reduced, this is second priority
                 * Tx ITR needs to be increased more than Rx, fourth priority
                 */
                intval = i40e_buildreg_itr(I40E_TX_ITR,
                                           q_vector->tx.target_itr);
                q_vector->tx.current_itr = q_vector->tx.target_itr;
                q_vector->itr_countdown = ITR_COUNTDOWN_START;
        } else if (q_vector->rx.current_itr != q_vector->rx.target_itr) {
                /* Rx ITR needs to be increased, third priority */
                intval = i40e_buildreg_itr(I40E_RX_ITR,
                                           q_vector->rx.target_itr);
                q_vector->rx.current_itr = q_vector->rx.target_itr;
                q_vector->itr_countdown = ITR_COUNTDOWN_START;
        } else {
                /* No ITR update, lowest priority */
                intval = i40e_buildreg_itr(I40E_ITR_NONE, 0);
                if (q_vector->itr_countdown)
                        q_vector->itr_countdown--;
        }

        if (!test_bit(__I40E_VSI_DOWN, vsi->state))
                wr32(hw, INTREG(q_vector->reg_idx), intval);
}

/**
 * i40e_napi_poll - NAPI polling Rx/Tx cleanup routine
 * @napi: napi struct with our devices info in it
 * @budget: amount of work driver is allowed to do this pass, in packets
 *
 * This function will clean all queues associated with a q_vector.
 *
 * Returns the amount of work done
 **/
int i40e_napi_poll(struct napi_struct *napi, int budget)
{
        struct i40e_q_vector *q_vector =
                               container_of(napi, struct i40e_q_vector, napi);
        struct i40e_vsi *vsi = q_vector->vsi;
        struct i40e_ring *ring;
        bool tx_clean_complete = true;
        bool rx_clean_complete = true;
        unsigned int tx_cleaned = 0;
        unsigned int rx_cleaned = 0;
        bool clean_complete = true;
        bool arm_wb = false;
        int budget_per_ring;
        int work_done = 0;

        if (test_bit(__I40E_VSI_DOWN, vsi->state)) {
                napi_complete(napi);
                return 0;
        }

        /* Since the actual Tx work is minimal, we can give the Tx a larger
         * budget and be more aggressive about cleaning up the Tx descriptors.
         */
        i40e_for_each_ring(ring, q_vector->tx) {
                bool wd = ring->xsk_pool ?
                          i40e_clean_xdp_tx_irq(vsi, ring) :
                          i40e_clean_tx_irq(vsi, ring, budget, &tx_cleaned);

                if (!wd) {
                        clean_complete = tx_clean_complete = false;
                        continue;
                }
                arm_wb |= ring->arm_wb;
                ring->arm_wb = false;
        }

        /* Handle case where we are called by netpoll with a budget of 0 */
        if (budget <= 0)
                goto tx_only;

        /* normally we have 1 Rx ring per q_vector */
        if (unlikely(q_vector->num_ringpairs > 1))
                /* We attempt to distribute budget to each Rx queue fairly, but
                 * don't allow the budget to go below 1 because that would exit
                 * polling early.
                 */
                budget_per_ring = max_t(int, budget / q_vector->num_ringpairs, 1);
        else
                /* Max of 1 Rx ring in this q_vector so give it the budget */
                budget_per_ring = budget;

        i40e_for_each_ring(ring, q_vector->rx) {
                int cleaned = ring->xsk_pool ?
                              i40e_clean_rx_irq_zc(ring, budget_per_ring) :
                              i40e_clean_rx_irq(ring, budget_per_ring, &rx_cleaned);

                work_done += cleaned;
                /* if we clean as many as budgeted, we must not be done */
                if (cleaned >= budget_per_ring)
                        clean_complete = rx_clean_complete = false;
        }

        if (!i40e_enabled_xdp_vsi(vsi))
                trace_i40e_napi_poll(napi, q_vector, budget, budget_per_ring, rx_cleaned,
                                     tx_cleaned, rx_clean_complete, tx_clean_complete);

        /* If work not completed, return budget and polling will return */
        if (!clean_complete) {
                int cpu_id = smp_processor_id();

                /* It is possible that the interrupt affinity has changed but,
                 * if the cpu is pegged at 100%, polling will never exit while
                 * traffic continues and the interrupt will be stuck on this
                 * cpu.  We check to make sure affinity is correct before we
                 * continue to poll, otherwise we must stop polling so the
                 * interrupt can move to the correct cpu.
                 */
                if (!cpumask_test_cpu(cpu_id, &q_vector->affinity_mask)) {
                        /* Tell napi that we are done polling */
                        napi_complete_done(napi, work_done);

                        /* Force an interrupt */
                        i40e_force_wb(vsi, q_vector);

                        /* Return budget-1 so that polling stops */
                        return budget - 1;
                }
tx_only:
                if (arm_wb) {
                        q_vector->tx.ring[0].tx_stats.tx_force_wb++;
                        i40e_enable_wb_on_itr(vsi, q_vector);
                }
                return budget;
        }

        if (q_vector->tx.ring[0].flags & I40E_TXR_FLAGS_WB_ON_ITR)
                q_vector->arm_wb_state = false;

        /* Exit the polling mode, but don't re-enable interrupts if stack might
         * poll us due to busy-polling
         */
        if (likely(napi_complete_done(napi, work_done)))
                i40e_update_enable_itr(vsi, q_vector);

        return min(work_done, budget - 1);
}

/**
 * i40e_atr - Add a Flow Director ATR filter
 * @tx_ring:  ring to add programming descriptor to
 * @skb:      send buffer
 * @tx_flags: send tx flags
 **/
static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
                     u32 tx_flags)
{
        struct i40e_filter_program_desc *fdir_desc;
        struct i40e_pf *pf = tx_ring->vsi->back;
        union {
                unsigned char *network;
                struct iphdr *ipv4;
                struct ipv6hdr *ipv6;
        } hdr;
        struct tcphdr *th;
        unsigned int hlen;
        u32 flex_ptype, dtype_cmd;
        int l4_proto;
        u16 i;

        /* make sure ATR is enabled */
        if (!(pf->flags & I40E_FLAG_FD_ATR_ENABLED))
                return;

        if (test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state))
                return;

        /* if sampling is disabled do nothing */
        if (!tx_ring->atr_sample_rate)
                return;

        /* Currently only IPv4/IPv6 with TCP is supported */
        if (!(tx_flags & (I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6)))
                return;

        /* snag network header to get L4 type and address */
        hdr.network = (tx_flags & I40E_TX_FLAGS_UDP_TUNNEL) ?
                      skb_inner_network_header(skb) : skb_network_header(skb);

        /* Note: tx_flags gets modified to reflect inner protocols in
         * tx_enable_csum function if encap is enabled.
         */
        if (tx_flags & I40E_TX_FLAGS_IPV4) {
                /* access ihl as u8 to avoid unaligned access on ia64 */
                hlen = (hdr.network[0] & 0x0F) << 2;
                l4_proto = hdr.ipv4->protocol;
        } else {
                /* find the start of the innermost ipv6 header */
                unsigned int inner_hlen = hdr.network - skb->data;
                unsigned int h_offset = inner_hlen;

                /* this function updates h_offset to the end of the header */
                l4_proto =
                  ipv6_find_hdr(skb, &h_offset, IPPROTO_TCP, NULL, NULL);
                /* hlen will contain our best estimate of the tcp header */
                hlen = h_offset - inner_hlen;
        }

        if (l4_proto != IPPROTO_TCP)
                return;

        th = (struct tcphdr *)(hdr.network + hlen);

        /* Due to lack of space, no more new filters can be programmed */
        if (th->syn && test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state))
                return;
        if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) {
                /* HW ATR eviction will take care of removing filters on FIN
                 * and RST packets.
                 */
                if (th->fin || th->rst)
                        return;
        }

        tx_ring->atr_count++;

        /* sample on all syn/fin/rst packets or once every atr sample rate */
        if (!th->fin &&
            !th->syn &&
            !th->rst &&
            (tx_ring->atr_count < tx_ring->atr_sample_rate))
                return;

        tx_ring->atr_count = 0;

        /* grab the next descriptor */
        i = tx_ring->next_to_use;
        fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);

        i++;
        tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;

        flex_ptype = (tx_ring->queue_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT) &
                      I40E_TXD_FLTR_QW0_QINDEX_MASK;
        flex_ptype |= (tx_flags & I40E_TX_FLAGS_IPV4) ?
                      (I40E_FILTER_PCTYPE_NONF_IPV4_TCP <<
                       I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) :
                      (I40E_FILTER_PCTYPE_NONF_IPV6_TCP <<
                       I40E_TXD_FLTR_QW0_PCTYPE_SHIFT);

        flex_ptype |= tx_ring->vsi->id << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT;

        dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG;

        dtype_cmd |= (th->fin || th->rst) ?
                     (I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
                      I40E_TXD_FLTR_QW1_PCMD_SHIFT) :
                     (I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
                      I40E_TXD_FLTR_QW1_PCMD_SHIFT);

        dtype_cmd |= I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX <<
                     I40E_TXD_FLTR_QW1_DEST_SHIFT;

        dtype_cmd |= I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID <<
                     I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT;

        dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK;
        if (!(tx_flags & I40E_TX_FLAGS_UDP_TUNNEL))
                dtype_cmd |=
                        ((u32)I40E_FD_ATR_STAT_IDX(pf->hw.pf_id) <<
                        I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
                        I40E_TXD_FLTR_QW1_CNTINDEX_MASK;
        else
                dtype_cmd |=
                        ((u32)I40E_FD_ATR_TUNNEL_STAT_IDX(pf->hw.pf_id) <<
                        I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
                        I40E_TXD_FLTR_QW1_CNTINDEX_MASK;

        if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED)
                dtype_cmd |= I40E_TXD_FLTR_QW1_ATR_MASK;

        fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype);
        fdir_desc->rsvd = cpu_to_le32(0);
        fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd);
        fdir_desc->fd_id = cpu_to_le32(0);
}

/**
 * i40e_tx_prepare_vlan_flags - prepare generic TX VLAN tagging flags for HW
 * @skb:     send buffer
 * @tx_ring: ring to send buffer on
 * @flags:   the tx flags to be set
 *
 * Checks the skb and set up correspondingly several generic transmit flags
 * related to VLAN tagging for the HW, such as VLAN, DCB, etc.
 *
 * Returns error code indicate the frame should be dropped upon error and the
 * otherwise  returns 0 to indicate the flags has been set properly.
 **/
static inline int i40e_tx_prepare_vlan_flags(struct sk_buff *skb,
                                             struct i40e_ring *tx_ring,
                                             u32 *flags)
{
        __be16 protocol = skb->protocol;
        u32  tx_flags = 0;

        if (protocol == htons(ETH_P_8021Q) &&
            !(tx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_TX)) {
                /* When HW VLAN acceleration is turned off by the user the
                 * stack sets the protocol to 8021q so that the driver
                 * can take any steps required to support the SW only
                 * VLAN handling.  In our case the driver doesn't need
                 * to take any further steps so just set the protocol
                 * to the encapsulated ethertype.
                 */
                skb->protocol = vlan_get_protocol(skb);
                goto out;
        }

        /* if we have a HW VLAN tag being added, default to the HW one */
        if (skb_vlan_tag_present(skb)) {
                tx_flags |= skb_vlan_tag_get(skb) << I40E_TX_FLAGS_VLAN_SHIFT;
                tx_flags |= I40E_TX_FLAGS_HW_VLAN;
        /* else if it is a SW VLAN, check the next protocol and store the tag */
        } else if (protocol == htons(ETH_P_8021Q)) {
                struct vlan_hdr *vhdr, _vhdr;

                vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr);
                if (!vhdr)
                        return -EINVAL;

                protocol = vhdr->h_vlan_encapsulated_proto;
                tx_flags |= ntohs(vhdr->h_vlan_TCI) << I40E_TX_FLAGS_VLAN_SHIFT;
                tx_flags |= I40E_TX_FLAGS_SW_VLAN;
        }

        if (!(tx_ring->vsi->back->flags & I40E_FLAG_DCB_ENABLED))
                goto out;

        /* Insert 802.1p priority into VLAN header */
        if ((tx_flags & (I40E_TX_FLAGS_HW_VLAN | I40E_TX_FLAGS_SW_VLAN)) ||
            (skb->priority != TC_PRIO_CONTROL)) {
                tx_flags &= ~I40E_TX_FLAGS_VLAN_PRIO_MASK;
                tx_flags |= (skb->priority & 0x7) <<
                                I40E_TX_FLAGS_VLAN_PRIO_SHIFT;
                if (tx_flags & I40E_TX_FLAGS_SW_VLAN) {
                        struct vlan_ethhdr *vhdr;
                        int rc;

                        rc = skb_cow_head(skb, 0);
                        if (rc < 0)
                                return rc;
                        vhdr = skb_vlan_eth_hdr(skb);
                        vhdr->h_vlan_TCI = htons(tx_flags >>
                                                 I40E_TX_FLAGS_VLAN_SHIFT);
                } else {
                        tx_flags |= I40E_TX_FLAGS_HW_VLAN;
                }
        }

out:
        *flags = tx_flags;
        return 0;
}

/**
 * i40e_tso - set up the tso context descriptor
 * @first:    pointer to first Tx buffer for xmit
 * @hdr_len:  ptr to the size of the packet header
 * @cd_type_cmd_tso_mss: Quad Word 1
 *
 * Returns 0 if no TSO can happen, 1 if tso is going, or error
 **/
static int i40e_tso(struct i40e_tx_buffer *first, u8 *hdr_len,
                    u64 *cd_type_cmd_tso_mss)
{
        struct sk_buff *skb = first->skb;
        u64 cd_cmd, cd_tso_len, cd_mss;
        __be16 protocol;
        union {
                struct iphdr *v4;
                struct ipv6hdr *v6;
                unsigned char *hdr;
        } ip;
        union {
                struct tcphdr *tcp;
                struct udphdr *udp;
                unsigned char *hdr;
        } l4;
        u32 paylen, l4_offset;
        u16 gso_size;
        int err;

        if (skb->ip_summed != CHECKSUM_PARTIAL)
                return 0;

        if (!skb_is_gso(skb))
                return 0;

        err = skb_cow_head(skb, 0);
        if (err < 0)
                return err;

        protocol = vlan_get_protocol(skb);

        if (eth_p_mpls(protocol))
                ip.hdr = skb_inner_network_header(skb);
        else
                ip.hdr = skb_network_header(skb);
        l4.hdr = skb_checksum_start(skb);

        /* initialize outer IP header fields */
        if (ip.v4->version == 4) {
                ip.v4->tot_len = 0;
                ip.v4->check = 0;

                first->tx_flags |= I40E_TX_FLAGS_TSO;
        } else {
                ip.v6->payload_len = 0;
                first->tx_flags |= I40E_TX_FLAGS_TSO;
        }

        if (skb_shinfo(skb)->gso_type & (SKB_GSO_GRE |
                                         SKB_GSO_GRE_CSUM |
                                         SKB_GSO_IPXIP4 |
                                         SKB_GSO_IPXIP6 |
                                         SKB_GSO_UDP_TUNNEL |
                                         SKB_GSO_UDP_TUNNEL_CSUM)) {
                if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) &&
                    (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM)) {
                        l4.udp->len = 0;

                        /* determine offset of outer transport header */
                        l4_offset = l4.hdr - skb->data;

                        /* remove payload length from outer checksum */
                        paylen = skb->len - l4_offset;
                        csum_replace_by_diff(&l4.udp->check,
                                             (__force __wsum)htonl(paylen));
                }

                /* reset pointers to inner headers */
                ip.hdr = skb_inner_network_header(skb);
                l4.hdr = skb_inner_transport_header(skb);

                /* initialize inner IP header fields */
                if (ip.v4->version == 4) {
                        ip.v4->tot_len = 0;
                        ip.v4->check = 0;
                } else {
                        ip.v6->payload_len = 0;
                }
        }

        /* determine offset of inner transport header */
        l4_offset = l4.hdr - skb->data;

        /* remove payload length from inner checksum */
        paylen = skb->len - l4_offset;

        if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) {
                csum_replace_by_diff(&l4.udp->check, (__force __wsum)htonl(paylen));
                /* compute length of segmentation header */
                *hdr_len = sizeof(*l4.udp) + l4_offset;
        } else {
                csum_replace_by_diff(&l4.tcp->check, (__force __wsum)htonl(paylen));
                /* compute length of segmentation header */
                *hdr_len = (l4.tcp->doff * 4) + l4_offset;
        }

        /* pull values out of skb_shinfo */
        gso_size = skb_shinfo(skb)->gso_size;

        /* update GSO size and bytecount with header size */
        first->gso_segs = skb_shinfo(skb)->gso_segs;
        first->bytecount += (first->gso_segs - 1) * *hdr_len;

        /* find the field values */
        cd_cmd = I40E_TX_CTX_DESC_TSO;
        cd_tso_len = skb->len - *hdr_len;
        cd_mss = gso_size;
        *cd_type_cmd_tso_mss |= (cd_cmd << I40E_TXD_CTX_QW1_CMD_SHIFT) |
                                (cd_tso_len << I40E_TXD_CTX_QW1_TSO_LEN_SHIFT) |
                                (cd_mss << I40E_TXD_CTX_QW1_MSS_SHIFT);
        return 1;
}

/**
 * i40e_tsyn - set up the tsyn context descriptor
 * @tx_ring:  ptr to the ring to send
 * @skb:      ptr to the skb we're sending
 * @tx_flags: the collected send information
 * @cd_type_cmd_tso_mss: Quad Word 1
 *
 * Returns 0 if no Tx timestamp can happen and 1 if the timestamp will happen
 **/
static int i40e_tsyn(struct i40e_ring *tx_ring, struct sk_buff *skb,
                     u32 tx_flags, u64 *cd_type_cmd_tso_mss)
{
        struct i40e_pf *pf;

        if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)))
                return 0;

        /* Tx timestamps cannot be sampled when doing TSO */
        if (tx_flags & I40E_TX_FLAGS_TSO)
                return 0;

        /* only timestamp the outbound packet if the user has requested it and
         * we are not already transmitting a packet to be timestamped
         */
        pf = i40e_netdev_to_pf(tx_ring->netdev);
        if (!(pf->flags & I40E_FLAG_PTP))
                return 0;

        if (pf->ptp_tx &&
            !test_and_set_bit_lock(__I40E_PTP_TX_IN_PROGRESS, pf->state)) {
                skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
                pf->ptp_tx_start = jiffies;
                pf->ptp_tx_skb = skb_get(skb);
        } else {
                pf->tx_hwtstamp_skipped++;
                return 0;
        }

        *cd_type_cmd_tso_mss |= (u64)I40E_TX_CTX_DESC_TSYN <<
                                I40E_TXD_CTX_QW1_CMD_SHIFT;

        return 1;
}

/**
 * i40e_tx_enable_csum - Enable Tx checksum offloads
 * @skb: send buffer
 * @tx_flags: pointer to Tx flags currently set
 * @td_cmd: Tx descriptor command bits to set
 * @td_offset: Tx descriptor header offsets to set
 * @tx_ring: Tx descriptor ring
 * @cd_tunneling: ptr to context desc bits
 **/
static int i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags,
                               u32 *td_cmd, u32 *td_offset,
                               struct i40e_ring *tx_ring,
                               u32 *cd_tunneling)
{
        union {
                struct iphdr *v4;
                struct ipv6hdr *v6;
                unsigned char *hdr;
        } ip;
        union {
                struct tcphdr *tcp;
                struct udphdr *udp;
                unsigned char *hdr;
        } l4;
        unsigned char *exthdr;
        u32 offset, cmd = 0;
        __be16 frag_off;
        __be16 protocol;
        u8 l4_proto = 0;

        if (skb->ip_summed != CHECKSUM_PARTIAL)
                return 0;

        protocol = vlan_get_protocol(skb);

        if (eth_p_mpls(protocol)) {
                ip.hdr = skb_inner_network_header(skb);
                l4.hdr = skb_checksum_start(skb);
        } else {
                ip.hdr = skb_network_header(skb);
                l4.hdr = skb_transport_header(skb);
        }

        /* set the tx_flags to indicate the IP protocol type. this is
         * required so that checksum header computation below is accurate.
         */
        if (ip.v4->version == 4)
                *tx_flags |= I40E_TX_FLAGS_IPV4;
        else
                *tx_flags |= I40E_TX_FLAGS_IPV6;

        /* compute outer L2 header size */
        offset = ((ip.hdr - skb->data) / 2) << I40E_TX_DESC_LENGTH_MACLEN_SHIFT;

        if (skb->encapsulation) {
                u32 tunnel = 0;
                /* define outer network header type */
                if (*tx_flags & I40E_TX_FLAGS_IPV4) {
                        tunnel |= (*tx_flags & I40E_TX_FLAGS_TSO) ?
                                  I40E_TX_CTX_EXT_IP_IPV4 :
                                  I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM;

                        l4_proto = ip.v4->protocol;
                } else if (*tx_flags & I40E_TX_FLAGS_IPV6) {
                        int ret;

                        tunnel |= I40E_TX_CTX_EXT_IP_IPV6;

                        exthdr = ip.hdr + sizeof(*ip.v6);
                        l4_proto = ip.v6->nexthdr;
                        ret = ipv6_skip_exthdr(skb, exthdr - skb->data,
                                               &l4_proto, &frag_off);
                        if (ret < 0)
                                return -1;
                }

                /* define outer transport */
                switch (l4_proto) {
                case IPPROTO_UDP:
                        tunnel |= I40E_TXD_CTX_UDP_TUNNELING;
                        *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL;
                        break;
                case IPPROTO_GRE:
                        tunnel |= I40E_TXD_CTX_GRE_TUNNELING;
                        *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL;
                        break;
                case IPPROTO_IPIP:
                case IPPROTO_IPV6:
                        *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL;
                        l4.hdr = skb_inner_network_header(skb);
                        break;
                default:
                        if (*tx_flags & I40E_TX_FLAGS_TSO)
                                return -1;

                        skb_checksum_help(skb);
                        return 0;
                }

                /* compute outer L3 header size */
                tunnel |= ((l4.hdr - ip.hdr) / 4) <<
                          I40E_TXD_CTX_QW0_EXT_IPLEN_SHIFT;

                /* switch IP header pointer from outer to inner header */
                ip.hdr = skb_inner_network_header(skb);

                /* compute tunnel header size */
                tunnel |= ((ip.hdr - l4.hdr) / 2) <<
                          I40E_TXD_CTX_QW0_NATLEN_SHIFT;

                /* indicate if we need to offload outer UDP header */
                if ((*tx_flags & I40E_TX_FLAGS_TSO) &&
                    !(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) &&
                    (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM))
                        tunnel |= I40E_TXD_CTX_QW0_L4T_CS_MASK;

                /* record tunnel offload values */
                *cd_tunneling |= tunnel;

                /* switch L4 header pointer from outer to inner */
                l4.hdr = skb_inner_transport_header(skb);
                l4_proto = 0;

                /* reset type as we transition from outer to inner headers */
                *tx_flags &= ~(I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6);
                if (ip.v4->version == 4)
                        *tx_flags |= I40E_TX_FLAGS_IPV4;
                if (ip.v6->version == 6)
                        *tx_flags |= I40E_TX_FLAGS_IPV6;
        }

        /* Enable IP checksum offloads */
        if (*tx_flags & I40E_TX_FLAGS_IPV4) {
                l4_proto = ip.v4->protocol;
                /* the stack computes the IP header already, the only time we
                 * need the hardware to recompute it is in the case of TSO.
                 */
                cmd |= (*tx_flags & I40E_TX_FLAGS_TSO) ?
                       I40E_TX_DESC_CMD_IIPT_IPV4_CSUM :
                       I40E_TX_DESC_CMD_IIPT_IPV4;
        } else if (*tx_flags & I40E_TX_FLAGS_IPV6) {
                cmd |= I40E_TX_DESC_CMD_IIPT_IPV6;

                exthdr = ip.hdr + sizeof(*ip.v6);
                l4_proto = ip.v6->nexthdr;
                if (l4.hdr != exthdr)
                        ipv6_skip_exthdr(skb, exthdr - skb->data,
                                         &l4_proto, &frag_off);
        }

        /* compute inner L3 header size */
        offset |= ((l4.hdr - ip.hdr) / 4) << I40E_TX_DESC_LENGTH_IPLEN_SHIFT;

        /* Enable L4 checksum offloads */
        switch (l4_proto) {
        case IPPROTO_TCP:
                /* enable checksum offloads */
                cmd |= I40E_TX_DESC_CMD_L4T_EOFT_TCP;
                offset |= l4.tcp->doff << I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
                break;
        case IPPROTO_SCTP:
                /* enable SCTP checksum offload */
                cmd |= I40E_TX_DESC_CMD_L4T_EOFT_SCTP;
                offset |= (sizeof(struct sctphdr) >> 2) <<
                          I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
                break;
        case IPPROTO_UDP:
                /* enable UDP checksum offload */
                cmd |= I40E_TX_DESC_CMD_L4T_EOFT_UDP;
                offset |= (sizeof(struct udphdr) >> 2) <<
                          I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
                break;
        default:
                if (*tx_flags & I40E_TX_FLAGS_TSO)
                        return -1;
                skb_checksum_help(skb);
                return 0;
        }

        *td_cmd |= cmd;
        *td_offset |= offset;

        return 1;
}

/**
 * i40e_create_tx_ctx - Build the Tx context descriptor
 * @tx_ring:  ring to create the descriptor on
 * @cd_type_cmd_tso_mss: Quad Word 1
 * @cd_tunneling: Quad Word 0 - bits 0-31
 * @cd_l2tag2: Quad Word 0 - bits 32-63
 **/
static void i40e_create_tx_ctx(struct i40e_ring *tx_ring,
                               const u64 cd_type_cmd_tso_mss,
                               const u32 cd_tunneling, const u32 cd_l2tag2)
{
        struct i40e_tx_context_desc *context_desc;
        int i = tx_ring->next_to_use;

        if ((cd_type_cmd_tso_mss == I40E_TX_DESC_DTYPE_CONTEXT) &&
            !cd_tunneling && !cd_l2tag2)
                return;

        /* grab the next descriptor */
        context_desc = I40E_TX_CTXTDESC(tx_ring, i);

        i++;
        tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;

        /* cpu_to_le32 and assign to struct fields */
        context_desc->tunneling_params = cpu_to_le32(cd_tunneling);
        context_desc->l2tag2 = cpu_to_le16(cd_l2tag2);
        context_desc->rsvd = cpu_to_le16(0);
        context_desc->type_cmd_tso_mss = cpu_to_le64(cd_type_cmd_tso_mss);
}

/**
 * __i40e_maybe_stop_tx - 2nd level check for tx stop conditions
 * @tx_ring: the ring to be checked
 * @size:    the size buffer we want to assure is available
 *
 * Returns -EBUSY if a stop is needed, else 0
 **/
int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
{
        netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
        /* Memory barrier before checking head and tail */
        smp_mb();

        ++tx_ring->tx_stats.tx_stopped;

        /* Check again in a case another CPU has just made room available. */
        if (likely(I40E_DESC_UNUSED(tx_ring) < size))
                return -EBUSY;

        /* A reprieve! - use start_queue because it doesn't call schedule */
        netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index);
        ++tx_ring->tx_stats.restart_queue;
        return 0;
}

/**
 * __i40e_chk_linearize - Check if there are more than 8 buffers per packet
 * @skb:      send buffer
 *
 * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire
 * and so we need to figure out the cases where we need to linearize the skb.
 *
 * For TSO we need to count the TSO header and segment payload separately.
 * As such we need to check cases where we have 7 fragments or more as we
 * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for
 * the segment payload in the first descriptor, and another 7 for the
 * fragments.
 **/
bool __i40e_chk_linearize(struct sk_buff *skb)
{
        const skb_frag_t *frag, *stale;
        int nr_frags, sum;

        /* no need to check if number of frags is less than 7 */
        nr_frags = skb_shinfo(skb)->nr_frags;
        if (nr_frags < (I40E_MAX_BUFFER_TXD - 1))
                return false;

        /* We need to walk through the list and validate that each group
         * of 6 fragments totals at least gso_size.
         */
        nr_frags -= I40E_MAX_BUFFER_TXD - 2;
        frag = &skb_shinfo(skb)->frags[0];

        /* Initialize size to the negative value of gso_size minus 1.  We
         * use this as the worst case scenerio in which the frag ahead
         * of us only provides one byte which is why we are limited to 6
         * descriptors for a single transmit as the header and previous
         * fragment are already consuming 2 descriptors.
         */
        sum = 1 - skb_shinfo(skb)->gso_size;

        /* Add size of frags 0 through 4 to create our initial sum */
        sum += skb_frag_size(frag++);
        sum += skb_frag_size(frag++);
        sum += skb_frag_size(frag++);
        sum += skb_frag_size(frag++);
        sum += skb_frag_size(frag++);

        /* Walk through fragments adding latest fragment, testing it, and
         * then removing stale fragments from the sum.
         */
        for (stale = &skb_shinfo(skb)->frags[0];; stale++) {
                int stale_size = skb_frag_size(stale);

                sum += skb_frag_size(frag++);

                /* The stale fragment may present us with a smaller
                 * descriptor than the actual fragment size. To account
                 * for that we need to remove all the data on the front and
                 * figure out what the remainder would be in the last
                 * descriptor associated with the fragment.
                 */
                if (stale_size > I40E_MAX_DATA_PER_TXD) {
                        int align_pad = -(skb_frag_off(stale)) &
                                        (I40E_MAX_READ_REQ_SIZE - 1);

                        sum -= align_pad;
                        stale_size -= align_pad;

                        do {
                                sum -= I40E_MAX_DATA_PER_TXD_ALIGNED;
                                stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED;
                        } while (stale_size > I40E_MAX_DATA_PER_TXD);
                }

                /* if sum is negative we failed to make sufficient progress */
                if (sum < 0)
                        return true;

                if (!nr_frags--)
                        break;

                sum -= stale_size;
        }

        return false;
}

/**
 * i40e_tx_map - Build the Tx descriptor
 * @tx_ring:  ring to send buffer on
 * @skb:      send buffer
 * @first:    first buffer info buffer to use
 * @tx_flags: collected send information
 * @hdr_len:  size of the packet header
 * @td_cmd:   the command field in the descriptor
 * @td_offset: offset for checksum or crc
 *
 * Returns 0 on success, -1 on failure to DMA
 **/
static inline int i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
                              struct i40e_tx_buffer *first, u32 tx_flags,
                              const u8 hdr_len, u32 td_cmd, u32 td_offset)
{
        unsigned int data_len = skb->data_len;
        unsigned int size = skb_headlen(skb);
        skb_frag_t *frag;
        struct i40e_tx_buffer *tx_bi;
        struct i40e_tx_desc *tx_desc;
        u16 i = tx_ring->next_to_use;
        u32 td_tag = 0;
        dma_addr_t dma;
        u16 desc_count = 1;

        if (tx_flags & I40E_TX_FLAGS_HW_VLAN) {
                td_cmd |= I40E_TX_DESC_CMD_IL2TAG1;
                td_tag = (tx_flags & I40E_TX_FLAGS_VLAN_MASK) >>
                         I40E_TX_FLAGS_VLAN_SHIFT;
        }

        first->tx_flags = tx_flags;

        dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);

        tx_desc = I40E_TX_DESC(tx_ring, i);
        tx_bi = first;

        for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
                unsigned int max_data = I40E_MAX_DATA_PER_TXD_ALIGNED;

                if (dma_mapping_error(tx_ring->dev, dma))
                        goto dma_error;

                /* record length, and DMA address */
                dma_unmap_len_set(tx_bi, len, size);
                dma_unmap_addr_set(tx_bi, dma, dma);

                /* align size to end of page */
                max_data += -dma & (I40E_MAX_READ_REQ_SIZE - 1);
                tx_desc->buffer_addr = cpu_to_le64(dma);

                while (unlikely(size > I40E_MAX_DATA_PER_TXD)) {
                        tx_desc->cmd_type_offset_bsz =
                                build_ctob(td_cmd, td_offset,
                                           max_data, td_tag);

                        tx_desc++;
                        i++;
                        desc_count++;

                        if (i == tx_ring->count) {
                                tx_desc = I40E_TX_DESC(tx_ring, 0);
                                i = 0;
                        }

                        dma += max_data;
                        size -= max_data;

                        max_data = I40E_MAX_DATA_PER_TXD_ALIGNED;
                        tx_desc->buffer_addr = cpu_to_le64(dma);
                }

                if (likely(!data_len))
                        break;

                tx_desc->cmd_type_offset_bsz = build_ctob(td_cmd, td_offset,
                                                          size, td_tag);

                tx_desc++;
                i++;
                desc_count++;

                if (i == tx_ring->count) {
                        tx_desc = I40E_TX_DESC(tx_ring, 0);
                        i = 0;
                }

                size = skb_frag_size(frag);
                data_len -= size;

                dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size,
                                       DMA_TO_DEVICE);

                tx_bi = &tx_ring->tx_bi[i];
        }

        netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);

        i++;
        if (i == tx_ring->count)
                i = 0;

        tx_ring->next_to_use = i;

        i40e_maybe_stop_tx(tx_ring, DESC_NEEDED);

        /* write last descriptor with EOP bit */
        td_cmd |= I40E_TX_DESC_CMD_EOP;

        /* We OR these values together to check both against 4 (WB_STRIDE)
         * below. This is safe since we don't re-use desc_count afterwards.
         */
        desc_count |= ++tx_ring->packet_stride;

        if (desc_count >= WB_STRIDE) {
                /* write last descriptor with RS bit set */
                td_cmd |= I40E_TX_DESC_CMD_RS;
                tx_ring->packet_stride = 0;
        }

        tx_desc->cmd_type_offset_bsz =
                        build_ctob(td_cmd, td_offset, size, td_tag);

        skb_tx_timestamp(skb);

        /* Force memory writes to complete before letting h/w know there
         * are new descriptors to fetch.
         *
         * We also use this memory barrier to make certain all of the
         * status bits have been updated before next_to_watch is written.
         */
        wmb();

        /* set next_to_watch value indicating a packet is present */
        first->next_to_watch = tx_desc;

        /* notify HW of packet */
        if (netif_xmit_stopped(txring_txq(tx_ring)) || !netdev_xmit_more()) {
                writel(i, tx_ring->tail);
        }

        return 0;

dma_error:
        dev_info(tx_ring->dev, "TX DMA map failed\n");

        /* clear dma mappings for failed tx_bi map */
        for (;;) {
                tx_bi = &tx_ring->tx_bi[i];
                i40e_unmap_and_free_tx_resource(tx_ring, tx_bi);
                if (tx_bi == first)
                        break;
                if (i == 0)
                        i = tx_ring->count;
                i--;
        }

        tx_ring->next_to_use = i;

        return -1;
}

static u16 i40e_swdcb_skb_tx_hash(struct net_device *dev,
                                  const struct sk_buff *skb,
                                  u16 num_tx_queues)
{
        u32 jhash_initval_salt = 0xd631614b;
        u32 hash;

        if (skb->sk && skb->sk->sk_hash)
                hash = skb->sk->sk_hash;
        else
                hash = (__force u16)skb->protocol ^ skb->hash;

        hash = jhash_1word(hash, jhash_initval_salt);

        return (u16)(((u64)hash * num_tx_queues) >> 32);
}

u16 i40e_lan_select_queue(struct net_device *netdev,
                          struct sk_buff *skb,
                          struct net_device __always_unused *sb_dev)
{
        struct i40e_netdev_priv *np = netdev_priv(netdev);
        struct i40e_vsi *vsi = np->vsi;
        struct i40e_hw *hw;
        u16 qoffset;
        u16 qcount;
        u8 tclass;
        u16 hash;
        u8 prio;

        /* is DCB enabled at all? */
        if (vsi->tc_config.numtc == 1 ||
            i40e_is_tc_mqprio_enabled(vsi->back))
                return netdev_pick_tx(netdev, skb, sb_dev);

        prio = skb->priority;
        hw = &vsi->back->hw;
        tclass = hw->local_dcbx_config.etscfg.prioritytable[prio];
        /* sanity check */
        if (unlikely(!(vsi->tc_config.enabled_tc & BIT(tclass))))
                tclass = 0;

        /* select a queue assigned for the given TC */
        qcount = vsi->tc_config.tc_info[tclass].qcount;
        hash = i40e_swdcb_skb_tx_hash(netdev, skb, qcount);

        qoffset = vsi->tc_config.tc_info[tclass].qoffset;
        return qoffset + hash;
}

/**
 * i40e_xmit_xdp_ring - transmits an XDP buffer to an XDP Tx ring
 * @xdpf: data to transmit
 * @xdp_ring: XDP Tx ring
 **/
static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf,
                              struct i40e_ring *xdp_ring)
{
        struct skb_shared_info *sinfo = xdp_get_shared_info_from_frame(xdpf);
        u8 nr_frags = unlikely(xdp_frame_has_frags(xdpf)) ? sinfo->nr_frags : 0;
        u16 i = 0, index = xdp_ring->next_to_use;
        struct i40e_tx_buffer *tx_head = &xdp_ring->tx_bi[index];
        struct i40e_tx_buffer *tx_bi = tx_head;
        struct i40e_tx_desc *tx_desc = I40E_TX_DESC(xdp_ring, index);
        void *data = xdpf->data;
        u32 size = xdpf->len;

        if (unlikely(I40E_DESC_UNUSED(xdp_ring) < 1 + nr_frags)) {
                xdp_ring->tx_stats.tx_busy++;
                return I40E_XDP_CONSUMED;
        }

        tx_head->bytecount = xdp_get_frame_len(xdpf);
        tx_head->gso_segs = 1;
        tx_head->xdpf = xdpf;

        for (;;) {
                dma_addr_t dma;

                dma = dma_map_single(xdp_ring->dev, data, size, DMA_TO_DEVICE);
                if (dma_mapping_error(xdp_ring->dev, dma))
                        goto unmap;

                /* record length, and DMA address */
                dma_unmap_len_set(tx_bi, len, size);
                dma_unmap_addr_set(tx_bi, dma, dma);

                tx_desc->buffer_addr = cpu_to_le64(dma);
                tx_desc->cmd_type_offset_bsz =
                        build_ctob(I40E_TX_DESC_CMD_ICRC, 0, size, 0);

                if (++index == xdp_ring->count)
                        index = 0;

                if (i == nr_frags)
                        break;

                tx_bi = &xdp_ring->tx_bi[index];
                tx_desc = I40E_TX_DESC(xdp_ring, index);

                data = skb_frag_address(&sinfo->frags[i]);
                size = skb_frag_size(&sinfo->frags[i]);
                i++;
        }

        tx_desc->cmd_type_offset_bsz |=
                cpu_to_le64(I40E_TXD_CMD << I40E_TXD_QW1_CMD_SHIFT);

        /* Make certain all of the status bits have been updated
         * before next_to_watch is written.
         */
        smp_wmb();

        xdp_ring->xdp_tx_active++;

        tx_head->next_to_watch = tx_desc;
        xdp_ring->next_to_use = index;

        return I40E_XDP_TX;

unmap:
        for (;;) {
                tx_bi = &xdp_ring->tx_bi[index];
                if (dma_unmap_len(tx_bi, len))
                        dma_unmap_page(xdp_ring->dev,
                                       dma_unmap_addr(tx_bi, dma),
                                       dma_unmap_len(tx_bi, len),
                                       DMA_TO_DEVICE);
                dma_unmap_len_set(tx_bi, len, 0);
                if (tx_bi == tx_head)
                        break;

                if (!index)
                        index += xdp_ring->count;
                index--;
        }

        return I40E_XDP_CONSUMED;
}

/**
 * i40e_xmit_frame_ring - Sends buffer on Tx ring
 * @skb:     send buffer
 * @tx_ring: ring to send buffer on
 *
 * Returns NETDEV_TX_OK if sent, else an error code
 **/
static netdev_tx_t i40e_xmit_frame_ring(struct sk_buff *skb,
                                        struct i40e_ring *tx_ring)
{
        u64 cd_type_cmd_tso_mss = I40E_TX_DESC_DTYPE_CONTEXT;
        u32 cd_tunneling = 0, cd_l2tag2 = 0;
        struct i40e_tx_buffer *first;
        u32 td_offset = 0;
        u32 tx_flags = 0;
        u32 td_cmd = 0;
        u8 hdr_len = 0;
        int tso, count;
        int tsyn;

        /* prefetch the data, we'll need it later */
        prefetch(skb->data);

        i40e_trace(xmit_frame_ring, skb, tx_ring);

        count = i40e_xmit_descriptor_count(skb);
        if (i40e_chk_linearize(skb, count)) {
                if (__skb_linearize(skb)) {
                        dev_kfree_skb_any(skb);
                        return NETDEV_TX_OK;
                }
                count = i40e_txd_use_count(skb->len);
                tx_ring->tx_stats.tx_linearize++;
        }

        /* need: 1 descriptor per page * PAGE_SIZE/I40E_MAX_DATA_PER_TXD,
         *       + 1 desc for skb_head_len/I40E_MAX_DATA_PER_TXD,
         *       + 4 desc gap to avoid the cache line where head is,
         *       + 1 desc for context descriptor,
         * otherwise try next time
         */
        if (i40e_maybe_stop_tx(tx_ring, count + 4 + 1)) {
                tx_ring->tx_stats.tx_busy++;
                return NETDEV_TX_BUSY;
        }

        /* record the location of the first descriptor for this packet */
        first = &tx_ring->tx_bi[tx_ring->next_to_use];
        first->skb = skb;
        first->bytecount = skb->len;
        first->gso_segs = 1;

        /* prepare the xmit flags */
        if (i40e_tx_prepare_vlan_flags(skb, tx_ring, &tx_flags))
                goto out_drop;

        tso = i40e_tso(first, &hdr_len, &cd_type_cmd_tso_mss);

        if (tso < 0)
                goto out_drop;
        else if (tso)
                tx_flags |= I40E_TX_FLAGS_TSO;

        /* Always offload the checksum, since it's in the data descriptor */
        tso = i40e_tx_enable_csum(skb, &tx_flags, &td_cmd, &td_offset,
                                  tx_ring, &cd_tunneling);
        if (tso < 0)
                goto out_drop;

        tsyn = i40e_tsyn(tx_ring, skb, tx_flags, &cd_type_cmd_tso_mss);

        if (tsyn)
                tx_flags |= I40E_TX_FLAGS_TSYN;

        /* always enable CRC insertion offload */
        td_cmd |= I40E_TX_DESC_CMD_ICRC;

        i40e_create_tx_ctx(tx_ring, cd_type_cmd_tso_mss,
                           cd_tunneling, cd_l2tag2);

        /* Add Flow Director ATR if it's enabled.
         *
         * NOTE: this must always be directly before the data descriptor.
         */
        i40e_atr(tx_ring, skb, tx_flags);

        if (i40e_tx_map(tx_ring, skb, first, tx_flags, hdr_len,
                        td_cmd, td_offset))
                goto cleanup_tx_tstamp;

        return NETDEV_TX_OK;

out_drop:
        i40e_trace(xmit_frame_ring_drop, first->skb, tx_ring);
        dev_kfree_skb_any(first->skb);
        first->skb = NULL;
cleanup_tx_tstamp:
        if (unlikely(tx_flags & I40E_TX_FLAGS_TSYN)) {
                struct i40e_pf *pf = i40e_netdev_to_pf(tx_ring->netdev);

                dev_kfree_skb_any(pf->ptp_tx_skb);
                pf->ptp_tx_skb = NULL;
                clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, pf->state);
        }

        return NETDEV_TX_OK;
}

/**
 * i40e_lan_xmit_frame - Selects the correct VSI and Tx queue to send buffer
 * @skb:    send buffer
 * @netdev: network interface device structure
 *
 * Returns NETDEV_TX_OK if sent, else an error code
 **/
netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
        struct i40e_netdev_priv *np = netdev_priv(netdev);
        struct i40e_vsi *vsi = np->vsi;
        struct i40e_ring *tx_ring = vsi->tx_rings[skb->queue_mapping];

        /* hardware can't handle really short frames, hardware padding works
         * beyond this point
         */
        if (skb_put_padto(skb, I40E_MIN_TX_LEN))
                return NETDEV_TX_OK;

        return i40e_xmit_frame_ring(skb, tx_ring);
}

/**
 * i40e_xdp_xmit - Implements ndo_xdp_xmit
 * @dev: netdev
 * @n: number of frames
 * @frames: array of XDP buffer pointers
 * @flags: XDP extra info
 *
 * Returns number of frames successfully sent. Failed frames
 * will be free'ed by XDP core.
 *
 * For error cases, a negative errno code is returned and no-frames
 * are transmitted (caller must handle freeing frames).
 **/
int i40e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames,
                  u32 flags)
{
        struct i40e_netdev_priv *np = netdev_priv(dev);
        unsigned int queue_index = smp_processor_id();
        struct i40e_vsi *vsi = np->vsi;
        struct i40e_pf *pf = vsi->back;
        struct i40e_ring *xdp_ring;
        int nxmit = 0;
        int i;

        if (test_bit(__I40E_VSI_DOWN, vsi->state))
                return -ENETDOWN;

        if (!i40e_enabled_xdp_vsi(vsi) || queue_index >= vsi->num_queue_pairs ||
            test_bit(__I40E_CONFIG_BUSY, pf->state))
                return -ENXIO;

        if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
                return -EINVAL;

        xdp_ring = vsi->xdp_rings[queue_index];

        for (i = 0; i < n; i++) {
                struct xdp_frame *xdpf = frames[i];
                int err;

                err = i40e_xmit_xdp_ring(xdpf, xdp_ring);
                if (err != I40E_XDP_TX)
                        break;
                nxmit++;
        }

        if (unlikely(flags & XDP_XMIT_FLUSH))
                i40e_xdp_ring_update_tail(xdp_ring);

        return nxmit;
}