1 /* ----------------------------------------------------------------------------
2 Linux PCMCIA ethernet adapter driver for the New Media Ethernet LAN.
3 nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao
5 The Ethernet LAN uses the Advanced Micro Devices (AMD) Am79C940 Media
6 Access Controller for Ethernet (MACE). It is essentially the Am2150
7 PCMCIA Ethernet card contained in the Am2150 Demo Kit.
9 Written by Roger C. Pao <rpao@paonet.org>
10 Copyright 1995 Roger C. Pao
11 Linux 2.5 cleanups Copyright Red Hat 2003
13 This software may be used and distributed according to the terms of
14 the GNU General Public License.
16 Ported to Linux 1.3.* network driver environment by
17 Matti Aarnio <mea@utu.fi>
21 Am2150 Technical Reference Manual, Revision 1.0, August 17, 1993
22 Am79C940 (MACE) Data Sheet, 1994
23 Am79C90 (C-LANCE) Data Sheet, 1994
24 Linux PCMCIA Programmer's Guide v1.17
25 /usr/src/linux/net/inet/dev.c, Linux kernel 1.2.8
27 Eric Mears, New Media Corporation
28 Tom Pollard, New Media Corporation
29 Dean Siasoyco, New Media Corporation
30 Ken Lesniak, Silicon Graphics, Inc. <lesniak@boston.sgi.com>
31 Donald Becker <becker@scyld.com>
32 David Hinds <dahinds@users.sourceforge.net>
34 The Linux client driver is based on the 3c589_cs.c client driver by
37 The Linux network driver outline is based on the 3c589_cs.c driver,
38 the 8390.c driver, and the example skeleton.c kernel code, which are
41 The Am2150 network driver hardware interface code is based on the
42 OS/9000 driver for the New Media Ethernet LAN by Eric Mears.
44 Special thanks for testing and help in debugging this driver goes
47 -------------------------------------------------------------------------------
48 Driver Notes and Issues
49 -------------------------------------------------------------------------------
51 1. Developed on a Dell 320SLi
52 PCMCIA Card Services 2.6.2
53 Linux dell 1.2.10 #1 Thu Jun 29 20:23:41 PDT 1995 i386
55 2. rc.pcmcia may require loading pcmcia_core with io_speed=300:
56 'insmod pcmcia_core.o io_speed=300'.
57 This will avoid problems with fast systems which causes rx_framecnt
58 to return random values.
60 3. If hot extraction does not work for you, use 'ifconfig eth0 down'
63 4. There is a bad slow-down problem in this driver.
65 5. Future: Multicast processing. In the meantime, do _not_ compile your
66 kernel with multicast ip enabled.
68 -------------------------------------------------------------------------------
70 -------------------------------------------------------------------------------
72 * 2.5.75-ac1 2003/07/11 Alan Cox <alan@lxorguk.ukuu.org.uk>
73 * Fixed hang on card eject as we probe it
74 * Cleaned up to use new style locking.
76 * Revision 0.16 1995/07/01 06:42:17 rpao
77 * Bug fix: nmclan_reset() called CardServices incorrectly.
79 * Revision 0.15 1995/05/24 08:09:47 rpao
80 * Re-implement MULTI_TX dev->tbusy handling.
82 * Revision 0.14 1995/05/23 03:19:30 rpao
83 * Added, in nmclan_config(), "tuple.Attributes = 0;".
84 * Modified MACE ID check to ignore chip revision level.
85 * Avoid tx_free_frames race condition between _start_xmit and _interrupt.
87 * Revision 0.13 1995/05/18 05:56:34 rpao
89 * Bug fix: nmclan_reset did not enable TX and RX: call restore_multicast_list.
90 * Bug fix: mace_interrupt checks ~MACE_IMR_DEFAULT. Fixes driver lockup.
92 * Revision 0.12 1995/05/14 00:12:23 rpao
93 * Statistics overhaul.
97 Bug fix: MACE statistics counters used wrong I/O ports.
98 Bug fix: mace_interrupt() needed to allow statistics to be
99 processed without RX or TX interrupts pending.
101 Multiple transmit request processing.
102 Modified statistics to use MACE counters where possible.
103 95/05/10 rpao V0.09 Bug fix: Must use IO_DATA_PATH_WIDTH_AUTO.
106 Bug fix: Make all non-exported functions private by using
108 Bug fix: Test IntrCnt _before_ reading MACE_IR.
109 95/05/10 rpao V0.07 Statistics.
110 95/05/09 rpao V0.06 Fix rx_framecnt problem by addition of PCIC wait states.
112 ---------------------------------------------------------------------------- */
114 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
116 #define DRV_NAME "nmclan_cs"
117 #define DRV_VERSION "0.16"
120 /* ----------------------------------------------------------------------------
121 Conditional Compilation Options
122 ---------------------------------------------------------------------------- */
125 #define RESET_ON_TIMEOUT 1
126 #define TX_INTERRUPTABLE 1
127 #define RESET_XILINX 0
129 /* ----------------------------------------------------------------------------
131 ---------------------------------------------------------------------------- */
133 #include <linux/module.h>
134 #include <linux/kernel.h>
135 #include <linux/init.h>
136 #include <linux/ptrace.h>
137 #include <linux/slab.h>
138 #include <linux/string.h>
139 #include <linux/timer.h>
140 #include <linux/interrupt.h>
141 #include <linux/in.h>
142 #include <linux/delay.h>
143 #include <linux/ethtool.h>
144 #include <linux/netdevice.h>
145 #include <linux/etherdevice.h>
146 #include <linux/skbuff.h>
147 #include <linux/if_arp.h>
148 #include <linux/ioport.h>
149 #include <linux/bitops.h>
151 #include <pcmcia/cisreg.h>
152 #include <pcmcia/cistpl.h>
153 #include <pcmcia/ds.h>
155 #include <asm/uaccess.h>
158 /* ----------------------------------------------------------------------------
160 ---------------------------------------------------------------------------- */
162 #define MACE_LADRF_LEN 8
163 /* 8 bytes in Logical Address Filter */
165 /* Loop Control Defines */
166 #define MACE_MAX_IR_ITERATIONS 10
167 #define MACE_MAX_RX_ITERATIONS 12
169 TBD: Dean brought this up, and I assumed the hardware would
172 If MACE_MAX_RX_ITERATIONS is > 1, rx_framecnt may still be
173 non-zero when the isr exits. We may not get another interrupt
174 to process the remaining packets for some time.
178 The Am2150 has a Xilinx XC3042 field programmable gate array (FPGA)
179 which manages the interface between the MACE and the PCMCIA bus. It
180 also includes buffer management for the 32K x 8 SRAM to control up to
181 four transmit and 12 receive frames at a time.
183 #define AM2150_MAX_TX_FRAMES 4
184 #define AM2150_MAX_RX_FRAMES 12
186 /* Am2150 Ethernet Card I/O Mapping */
187 #define AM2150_RCV 0x00
188 #define AM2150_XMT 0x04
189 #define AM2150_XMT_SKIP 0x09
190 #define AM2150_RCV_NEXT 0x0A
191 #define AM2150_RCV_FRAME_COUNT 0x0B
192 #define AM2150_MACE_BANK 0x0C
193 #define AM2150_MACE_BASE 0x10
196 #define MACE_RCVFIFO 0
197 #define MACE_XMTFIFO 1
203 #define MACE_FIFOFC 7
207 #define MACE_BIUCC 11
208 #define MACE_FIFOCC 12
209 #define MACE_MACCC 13
210 #define MACE_PLSCC 14
211 #define MACE_PHYCC 15
212 #define MACE_CHIPIDL 16
213 #define MACE_CHIPIDH 17
216 #define MACE_LADRF 20
222 #define MACE_RNTPC 26
223 #define MACE_RCVCC 27
230 #define MACE_XMTRC_EXDEF 0x80
231 #define MACE_XMTRC_XMTRC 0x0F
233 #define MACE_XMTFS_XMTSV 0x80
234 #define MACE_XMTFS_UFLO 0x40
235 #define MACE_XMTFS_LCOL 0x20
236 #define MACE_XMTFS_MORE 0x10
237 #define MACE_XMTFS_ONE 0x08
238 #define MACE_XMTFS_DEFER 0x04
239 #define MACE_XMTFS_LCAR 0x02
240 #define MACE_XMTFS_RTRY 0x01
242 #define MACE_RCVFS_RCVSTS 0xF000
243 #define MACE_RCVFS_OFLO 0x8000
244 #define MACE_RCVFS_CLSN 0x4000
245 #define MACE_RCVFS_FRAM 0x2000
246 #define MACE_RCVFS_FCS 0x1000
248 #define MACE_FIFOFC_RCVFC 0xF0
249 #define MACE_FIFOFC_XMTFC 0x0F
251 #define MACE_IR_JAB 0x80
252 #define MACE_IR_BABL 0x40
253 #define MACE_IR_CERR 0x20
254 #define MACE_IR_RCVCCO 0x10
255 #define MACE_IR_RNTPCO 0x08
256 #define MACE_IR_MPCO 0x04
257 #define MACE_IR_RCVINT 0x02
258 #define MACE_IR_XMTINT 0x01
260 #define MACE_MACCC_PROM 0x80
261 #define MACE_MACCC_DXMT2PD 0x40
262 #define MACE_MACCC_EMBA 0x20
263 #define MACE_MACCC_RESERVED 0x10
264 #define MACE_MACCC_DRCVPA 0x08
265 #define MACE_MACCC_DRCVBC 0x04
266 #define MACE_MACCC_ENXMT 0x02
267 #define MACE_MACCC_ENRCV 0x01
269 #define MACE_PHYCC_LNKFL 0x80
270 #define MACE_PHYCC_DLNKTST 0x40
271 #define MACE_PHYCC_REVPOL 0x20
272 #define MACE_PHYCC_DAPC 0x10
273 #define MACE_PHYCC_LRT 0x08
274 #define MACE_PHYCC_ASEL 0x04
275 #define MACE_PHYCC_RWAKE 0x02
276 #define MACE_PHYCC_AWAKE 0x01
278 #define MACE_IAC_ADDRCHG 0x80
279 #define MACE_IAC_PHYADDR 0x04
280 #define MACE_IAC_LOGADDR 0x02
282 #define MACE_UTR_RTRE 0x80
283 #define MACE_UTR_RTRD 0x40
284 #define MACE_UTR_RPA 0x20
285 #define MACE_UTR_FCOLL 0x10
286 #define MACE_UTR_RCVFCSE 0x08
287 #define MACE_UTR_LOOP_INCL_MENDEC 0x06
288 #define MACE_UTR_LOOP_NO_MENDEC 0x04
289 #define MACE_UTR_LOOP_EXTERNAL 0x02
290 #define MACE_UTR_LOOP_NONE 0x00
291 #define MACE_UTR_RESERVED 0x01
293 /* Switch MACE register bank (only 0 and 1 are valid) */
294 #define MACEBANK(win_num) outb((win_num), ioaddr + AM2150_MACE_BANK)
296 #define MACE_IMR_DEFAULT \
307 #undef MACE_IMR_DEFAULT
308 #define MACE_IMR_DEFAULT 0x00 /* New statistics handling: grab everything */
310 #define TX_TIMEOUT ((400*HZ)/1000)
312 /* ----------------------------------------------------------------------------
314 ---------------------------------------------------------------------------- */
316 typedef struct _mace_statistics {
331 /* RFS1--Receive Status (RCVSTS) */
337 /* RFS2--Runt Packet Count (RNTPC) */
340 /* RFS3--Receive Collision Count (RCVCC) */
361 typedef struct _mace_private {
362 struct pcmcia_device *p_dev;
363 struct net_device_stats linux_stats; /* Linux statistics counters */
364 mace_statistics mace_stats; /* MACE chip statistics counters */
366 /* restore_multicast_list() state variables */
367 int multicast_ladrf[MACE_LADRF_LEN]; /* Logical address filter */
368 int multicast_num_addrs;
370 char tx_free_frames; /* Number of free transmit frame buffers */
371 char tx_irq_disabled; /* MACE TX interrupt disabled */
373 spinlock_t bank_lock; /* Must be held if you step off bank 0 */
376 /* ----------------------------------------------------------------------------
377 Private Global Variables
378 ---------------------------------------------------------------------------- */
380 static const char *if_names[]={
381 "Auto", "10baseT", "BNC",
384 /* ----------------------------------------------------------------------------
386 These are the parameters that can be set during loading with
388 ---------------------------------------------------------------------------- */
390 MODULE_DESCRIPTION("New Media PCMCIA ethernet driver");
391 MODULE_LICENSE("GPL");
393 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
395 /* 0=auto, 1=10baseT, 2 = 10base2, default=auto */
396 INT_MODULE_PARM(if_port, 0);
399 /* ----------------------------------------------------------------------------
401 ---------------------------------------------------------------------------- */
403 static int nmclan_config(struct pcmcia_device *link);
404 static void nmclan_release(struct pcmcia_device *link);
406 static void nmclan_reset(struct net_device *dev);
407 static int mace_config(struct net_device *dev, struct ifmap *map);
408 static int mace_open(struct net_device *dev);
409 static int mace_close(struct net_device *dev);
410 static netdev_tx_t mace_start_xmit(struct sk_buff *skb,
411 struct net_device *dev);
412 static void mace_tx_timeout(struct net_device *dev);
413 static irqreturn_t mace_interrupt(int irq, void *dev_id);
414 static struct net_device_stats *mace_get_stats(struct net_device *dev);
415 static int mace_rx(struct net_device *dev, unsigned char RxCnt);
416 static void restore_multicast_list(struct net_device *dev);
417 static void set_multicast_list(struct net_device *dev);
418 static const struct ethtool_ops netdev_ethtool_ops;
421 static void nmclan_detach(struct pcmcia_device *p_dev);
423 static const struct net_device_ops mace_netdev_ops = {
424 .ndo_open = mace_open,
425 .ndo_stop = mace_close,
426 .ndo_start_xmit = mace_start_xmit,
427 .ndo_tx_timeout = mace_tx_timeout,
428 .ndo_set_config = mace_config,
429 .ndo_get_stats = mace_get_stats,
430 .ndo_set_rx_mode = set_multicast_list,
431 .ndo_change_mtu = eth_change_mtu,
432 .ndo_set_mac_address = eth_mac_addr,
433 .ndo_validate_addr = eth_validate_addr,
436 static int nmclan_probe(struct pcmcia_device *link)
439 struct net_device *dev;
441 dev_dbg(&link->dev, "nmclan_attach()\n");
443 /* Create new ethernet device */
444 dev = alloc_etherdev(sizeof(mace_private));
447 lp = netdev_priv(dev);
451 spin_lock_init(&lp->bank_lock);
452 link->resource[0]->end = 32;
453 link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
454 link->config_flags |= CONF_ENABLE_IRQ;
455 link->config_index = 1;
456 link->config_regs = PRESENT_OPTION;
458 lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
460 dev->netdev_ops = &mace_netdev_ops;
461 SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
462 dev->watchdog_timeo = TX_TIMEOUT;
464 return nmclan_config(link);
465 } /* nmclan_attach */
467 static void nmclan_detach(struct pcmcia_device *link)
469 struct net_device *dev = link->priv;
471 dev_dbg(&link->dev, "nmclan_detach\n");
473 unregister_netdev(dev);
475 nmclan_release(link);
478 } /* nmclan_detach */
480 /* ----------------------------------------------------------------------------
482 Reads a MACE register. This is bank independent; however, the
483 caller must ensure that this call is not interruptable. We are
484 assuming that during normal operation, the MACE is always in
486 ---------------------------------------------------------------------------- */
487 static int mace_read(mace_private *lp, unsigned int ioaddr, int reg)
493 case 0: /* register 0-15 */
494 data = inb(ioaddr + AM2150_MACE_BASE + reg);
496 case 1: /* register 16-31 */
497 spin_lock_irqsave(&lp->bank_lock, flags);
499 data = inb(ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
501 spin_unlock_irqrestore(&lp->bank_lock, flags);
507 /* ----------------------------------------------------------------------------
509 Writes to a MACE register. This is bank independent; however,
510 the caller must ensure that this call is not interruptable. We
511 are assuming that during normal operation, the MACE is always in
513 ---------------------------------------------------------------------------- */
514 static void mace_write(mace_private *lp, unsigned int ioaddr, int reg,
520 case 0: /* register 0-15 */
521 outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + reg);
523 case 1: /* register 16-31 */
524 spin_lock_irqsave(&lp->bank_lock, flags);
526 outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
528 spin_unlock_irqrestore(&lp->bank_lock, flags);
533 /* ----------------------------------------------------------------------------
535 Resets the MACE chip.
536 ---------------------------------------------------------------------------- */
537 static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr)
542 /* MACE Software reset */
543 mace_write(lp, ioaddr, MACE_BIUCC, 1);
544 while (mace_read(lp, ioaddr, MACE_BIUCC) & 0x01) {
545 /* Wait for reset bit to be cleared automatically after <= 200ns */;
548 pr_err("reset failed, card removed?\n");
553 mace_write(lp, ioaddr, MACE_BIUCC, 0);
555 /* The Am2150 requires that the MACE FIFOs operate in burst mode. */
556 mace_write(lp, ioaddr, MACE_FIFOCC, 0x0F);
558 mace_write(lp,ioaddr, MACE_RCVFC, 0); /* Disable Auto Strip Receive */
559 mace_write(lp, ioaddr, MACE_IMR, 0xFF); /* Disable all interrupts until _open */
562 * Bit 2-1 PORTSEL[1-0] Port Select.
565 * 10 DAI Port (reserved in Am2150)
567 * For this card, only the first two are valid.
568 * So, PLSCC should be set to
571 * Or just set ASEL in PHYCC below!
575 mace_write(lp, ioaddr, MACE_PLSCC, 0x02);
578 mace_write(lp, ioaddr, MACE_PLSCC, 0x00);
581 mace_write(lp, ioaddr, MACE_PHYCC, /* ASEL */ 4);
582 /* ASEL Auto Select. When set, the PORTSEL[1-0] bits are overridden,
583 and the MACE device will automatically select the operating media
588 mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_PHYADDR);
589 /* Poll ADDRCHG bit */
591 while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
595 pr_err("ADDRCHG timeout, card removed?\n");
599 /* Set PADR register */
600 for (i = 0; i < ETH_ALEN; i++)
601 mace_write(lp, ioaddr, MACE_PADR, enet_addr[i]);
603 /* MAC Configuration Control Register should be written last */
604 /* Let set_multicast_list set this. */
605 /* mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); */
606 mace_write(lp, ioaddr, MACE_MACCC, 0x00);
610 static int nmclan_config(struct pcmcia_device *link)
612 struct net_device *dev = link->priv;
613 mace_private *lp = netdev_priv(dev);
619 dev_dbg(&link->dev, "nmclan_config\n");
622 ret = pcmcia_request_io(link);
625 ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
628 ret = pcmcia_enable_device(link);
632 dev->irq = link->irq;
633 dev->base_addr = link->resource[0]->start;
635 ioaddr = dev->base_addr;
637 /* Read the ethernet address from the CIS. */
638 len = pcmcia_get_tuple(link, 0x80, &buf);
639 if (!buf || len < ETH_ALEN) {
643 memcpy(dev->dev_addr, buf, ETH_ALEN);
646 /* Verify configuration by reading the MACE ID. */
650 sig[0] = mace_read(lp, ioaddr, MACE_CHIPIDL);
651 sig[1] = mace_read(lp, ioaddr, MACE_CHIPIDH);
652 if ((sig[0] == 0x40) && ((sig[1] & 0x0F) == 0x09)) {
653 dev_dbg(&link->dev, "nmclan_cs configured: mace id=%x %x\n",
656 pr_notice("mace id not found: %x %x should be 0x40 0x?9\n",
662 if(mace_init(lp, ioaddr, dev->dev_addr) == -1)
665 /* The if_port symbol can be set when the module is loaded */
667 dev->if_port = if_port;
669 pr_notice("invalid if_port requested\n");
671 SET_NETDEV_DEV(dev, &link->dev);
673 i = register_netdev(dev);
675 pr_notice("register_netdev() failed\n");
679 netdev_info(dev, "nmclan: port %#3lx, irq %d, %s port, hw_addr %pM\n",
680 dev->base_addr, dev->irq, if_names[dev->if_port], dev->dev_addr);
684 nmclan_release(link);
686 } /* nmclan_config */
688 static void nmclan_release(struct pcmcia_device *link)
690 dev_dbg(&link->dev, "nmclan_release\n");
691 pcmcia_disable_device(link);
694 static int nmclan_suspend(struct pcmcia_device *link)
696 struct net_device *dev = link->priv;
699 netif_device_detach(dev);
704 static int nmclan_resume(struct pcmcia_device *link)
706 struct net_device *dev = link->priv;
710 netif_device_attach(dev);
717 /* ----------------------------------------------------------------------------
719 Reset and restore all of the Xilinx and MACE registers.
720 ---------------------------------------------------------------------------- */
721 static void nmclan_reset(struct net_device *dev)
723 mace_private *lp = netdev_priv(dev);
726 struct pcmcia_device *link = &lp->link;
729 /* Save original COR value */
730 pcmcia_read_config_byte(link, CISREG_COR, &OrigCorValue);
733 dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%x, resetting...\n",
735 pcmcia_write_config_byte(link, CISREG_COR, COR_SOFT_RESET);
736 /* Need to wait for 20 ms for PCMCIA to finish reset. */
738 /* Restore original COR configuration index */
739 pcmcia_write_config_byte(link, CISREG_COR,
740 (COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK)));
741 /* Xilinx is now completely reset along with the MACE chip. */
742 lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
744 #endif /* #if RESET_XILINX */
746 /* Xilinx is now completely reset along with the MACE chip. */
747 lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
749 /* Reinitialize the MACE chip for operation. */
750 mace_init(lp, dev->base_addr, dev->dev_addr);
751 mace_write(lp, dev->base_addr, MACE_IMR, MACE_IMR_DEFAULT);
753 /* Restore the multicast list and enable TX and RX. */
754 restore_multicast_list(dev);
757 /* ----------------------------------------------------------------------------
759 [Someone tell me what this is supposed to do? Is if_port a defined
760 standard? If so, there should be defines to indicate 1=10Base-T,
761 2=10Base-2, etc. including limited automatic detection.]
762 ---------------------------------------------------------------------------- */
763 static int mace_config(struct net_device *dev, struct ifmap *map)
765 if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
766 if (map->port <= 2) {
767 dev->if_port = map->port;
768 netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
775 /* ----------------------------------------------------------------------------
778 ---------------------------------------------------------------------------- */
779 static int mace_open(struct net_device *dev)
781 unsigned int ioaddr = dev->base_addr;
782 mace_private *lp = netdev_priv(dev);
783 struct pcmcia_device *link = lp->p_dev;
785 if (!pcmcia_dev_present(link))
792 netif_start_queue(dev);
795 return 0; /* Always succeed */
798 /* ----------------------------------------------------------------------------
800 Closes device driver.
801 ---------------------------------------------------------------------------- */
802 static int mace_close(struct net_device *dev)
804 unsigned int ioaddr = dev->base_addr;
805 mace_private *lp = netdev_priv(dev);
806 struct pcmcia_device *link = lp->p_dev;
808 dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
810 /* Mask off all interrupts from the MACE chip. */
811 outb(0xFF, ioaddr + AM2150_MACE_BASE + MACE_IMR);
814 netif_stop_queue(dev);
819 static void netdev_get_drvinfo(struct net_device *dev,
820 struct ethtool_drvinfo *info)
822 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
823 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
824 snprintf(info->bus_info, sizeof(info->bus_info),
825 "PCMCIA 0x%lx", dev->base_addr);
828 static const struct ethtool_ops netdev_ethtool_ops = {
829 .get_drvinfo = netdev_get_drvinfo,
832 /* ----------------------------------------------------------------------------
834 This routine begins the packet transmit function. When completed,
835 it will generate a transmit interrupt.
837 According to /usr/src/linux/net/inet/dev.c, if _start_xmit
838 returns 0, the "packet is now solely the responsibility of the
839 driver." If _start_xmit returns non-zero, the "transmission
840 failed, put skb back into a list."
841 ---------------------------------------------------------------------------- */
843 static void mace_tx_timeout(struct net_device *dev)
845 mace_private *lp = netdev_priv(dev);
846 struct pcmcia_device *link = lp->p_dev;
848 netdev_notice(dev, "transmit timed out -- ");
850 pr_cont("resetting card\n");
851 pcmcia_reset_card(link->socket);
852 #else /* #if RESET_ON_TIMEOUT */
853 pr_cont("NOT resetting card\n");
854 #endif /* #if RESET_ON_TIMEOUT */
855 dev->trans_start = jiffies; /* prevent tx timeout */
856 netif_wake_queue(dev);
859 static netdev_tx_t mace_start_xmit(struct sk_buff *skb,
860 struct net_device *dev)
862 mace_private *lp = netdev_priv(dev);
863 unsigned int ioaddr = dev->base_addr;
865 netif_stop_queue(dev);
867 pr_debug("%s: mace_start_xmit(length = %ld) called.\n",
868 dev->name, (long)skb->len);
870 #if (!TX_INTERRUPTABLE)
871 /* Disable MACE TX interrupts. */
872 outb(MACE_IMR_DEFAULT | MACE_IR_XMTINT,
873 ioaddr + AM2150_MACE_BASE + MACE_IMR);
874 lp->tx_irq_disabled=1;
875 #endif /* #if (!TX_INTERRUPTABLE) */
878 /* This block must not be interrupted by another transmit request!
879 mace_tx_timeout will take care of timer-based retransmissions from
880 the upper layers. The interrupt handler is guaranteed never to
881 service a transmit interrupt while we are in here.
884 lp->linux_stats.tx_bytes += skb->len;
885 lp->tx_free_frames--;
887 /* WARNING: Write the _exact_ number of bytes written in the header! */
888 /* Put out the word header [must be an outw()] . . . */
889 outw(skb->len, ioaddr + AM2150_XMT);
890 /* . . . and the packet [may be any combination of outw() and outb()] */
891 outsw(ioaddr + AM2150_XMT, skb->data, skb->len >> 1);
893 /* Odd byte transfer */
894 outb(skb->data[skb->len-1], ioaddr + AM2150_XMT);
898 if (lp->tx_free_frames > 0)
899 netif_start_queue(dev);
900 #endif /* #if MULTI_TX */
903 #if (!TX_INTERRUPTABLE)
904 /* Re-enable MACE TX interrupts. */
905 lp->tx_irq_disabled=0;
906 outb(MACE_IMR_DEFAULT, ioaddr + AM2150_MACE_BASE + MACE_IMR);
907 #endif /* #if (!TX_INTERRUPTABLE) */
912 } /* mace_start_xmit */
914 /* ----------------------------------------------------------------------------
916 The interrupt handler.
917 ---------------------------------------------------------------------------- */
918 static irqreturn_t mace_interrupt(int irq, void *dev_id)
920 struct net_device *dev = (struct net_device *) dev_id;
921 mace_private *lp = netdev_priv(dev);
924 int IntrCnt = MACE_MAX_IR_ITERATIONS;
927 pr_debug("mace_interrupt(): irq 0x%X for unknown device.\n",
932 ioaddr = dev->base_addr;
934 if (lp->tx_irq_disabled) {
936 if (lp->tx_irq_disabled)
937 msg = "Interrupt with tx_irq_disabled";
939 msg = "Re-entering the interrupt handler";
940 netdev_notice(dev, "%s [isr=%02X, imr=%02X]\n",
942 inb(ioaddr + AM2150_MACE_BASE + MACE_IR),
943 inb(ioaddr + AM2150_MACE_BASE + MACE_IMR));
944 /* WARNING: MACE_IR has been read! */
948 if (!netif_device_present(dev)) {
949 netdev_dbg(dev, "interrupt from dead card\n");
954 /* WARNING: MACE_IR is a READ/CLEAR port! */
955 status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR);
957 pr_debug("mace_interrupt: irq 0x%X status 0x%X.\n", irq, status);
959 if (status & MACE_IR_RCVINT) {
960 mace_rx(dev, MACE_MAX_RX_ITERATIONS);
963 if (status & MACE_IR_XMTINT) {
964 unsigned char fifofc;
968 fifofc = inb(ioaddr + AM2150_MACE_BASE + MACE_FIFOFC);
969 if ((fifofc & MACE_FIFOFC_XMTFC)==0) {
970 lp->linux_stats.tx_errors++;
971 outb(0xFF, ioaddr + AM2150_XMT_SKIP);
974 /* Transmit Retry Count (XMTRC, reg 4) */
975 xmtrc = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTRC);
976 if (xmtrc & MACE_XMTRC_EXDEF) lp->mace_stats.exdef++;
977 lp->mace_stats.xmtrc += (xmtrc & MACE_XMTRC_XMTRC);
980 (xmtfs = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTFS)) &
981 MACE_XMTFS_XMTSV /* Transmit Status Valid */
983 lp->mace_stats.xmtsv++;
985 if (xmtfs & ~MACE_XMTFS_XMTSV) {
986 if (xmtfs & MACE_XMTFS_UFLO) {
987 /* Underflow. Indicates that the Transmit FIFO emptied before
988 the end of frame was reached. */
989 lp->mace_stats.uflo++;
991 if (xmtfs & MACE_XMTFS_LCOL) {
993 lp->mace_stats.lcol++;
995 if (xmtfs & MACE_XMTFS_MORE) {
996 /* MORE than one retry was needed */
997 lp->mace_stats.more++;
999 if (xmtfs & MACE_XMTFS_ONE) {
1000 /* Exactly ONE retry occurred */
1001 lp->mace_stats.one++;
1003 if (xmtfs & MACE_XMTFS_DEFER) {
1004 /* Transmission was defered */
1005 lp->mace_stats.defer++;
1007 if (xmtfs & MACE_XMTFS_LCAR) {
1008 /* Loss of carrier */
1009 lp->mace_stats.lcar++;
1011 if (xmtfs & MACE_XMTFS_RTRY) {
1012 /* Retry error: transmit aborted after 16 attempts */
1013 lp->mace_stats.rtry++;
1015 } /* if (xmtfs & ~MACE_XMTFS_XMTSV) */
1017 } /* if (xmtfs & MACE_XMTFS_XMTSV) */
1019 lp->linux_stats.tx_packets++;
1020 lp->tx_free_frames++;
1021 netif_wake_queue(dev);
1022 } /* if (status & MACE_IR_XMTINT) */
1024 if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) {
1025 if (status & MACE_IR_JAB) {
1026 /* Jabber Error. Excessive transmit duration (20-150ms). */
1027 lp->mace_stats.jab++;
1029 if (status & MACE_IR_BABL) {
1030 /* Babble Error. >1518 bytes transmitted. */
1031 lp->mace_stats.babl++;
1033 if (status & MACE_IR_CERR) {
1034 /* Collision Error. CERR indicates the absence of the
1035 Signal Quality Error Test message after a packet
1037 lp->mace_stats.cerr++;
1039 if (status & MACE_IR_RCVCCO) {
1040 /* Receive Collision Count Overflow; */
1041 lp->mace_stats.rcvcco++;
1043 if (status & MACE_IR_RNTPCO) {
1044 /* Runt Packet Count Overflow */
1045 lp->mace_stats.rntpco++;
1047 if (status & MACE_IR_MPCO) {
1048 /* Missed Packet Count Overflow */
1049 lp->mace_stats.mpco++;
1051 } /* if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) */
1053 } while ((status & ~MACE_IMR_DEFAULT) && (--IntrCnt));
1056 } /* mace_interrupt */
1058 /* ----------------------------------------------------------------------------
1061 ---------------------------------------------------------------------------- */
1062 static int mace_rx(struct net_device *dev, unsigned char RxCnt)
1064 mace_private *lp = netdev_priv(dev);
1065 unsigned int ioaddr = dev->base_addr;
1066 unsigned char rx_framecnt;
1067 unsigned short rx_status;
1070 ((rx_framecnt = inb(ioaddr + AM2150_RCV_FRAME_COUNT)) > 0) &&
1071 (rx_framecnt <= 12) && /* rx_framecnt==0xFF if card is extracted. */
1074 rx_status = inw(ioaddr + AM2150_RCV);
1076 pr_debug("%s: in mace_rx(), framecnt 0x%X, rx_status"
1077 " 0x%X.\n", dev->name, rx_framecnt, rx_status);
1079 if (rx_status & MACE_RCVFS_RCVSTS) { /* Error, update stats. */
1080 lp->linux_stats.rx_errors++;
1081 if (rx_status & MACE_RCVFS_OFLO) {
1082 lp->mace_stats.oflo++;
1084 if (rx_status & MACE_RCVFS_CLSN) {
1085 lp->mace_stats.clsn++;
1087 if (rx_status & MACE_RCVFS_FRAM) {
1088 lp->mace_stats.fram++;
1090 if (rx_status & MACE_RCVFS_FCS) {
1091 lp->mace_stats.fcs++;
1094 short pkt_len = (rx_status & ~MACE_RCVFS_RCVSTS) - 4;
1095 /* Auto Strip is off, always subtract 4 */
1096 struct sk_buff *skb;
1098 lp->mace_stats.rfs_rntpc += inb(ioaddr + AM2150_RCV);
1099 /* runt packet count */
1100 lp->mace_stats.rfs_rcvcc += inb(ioaddr + AM2150_RCV);
1101 /* rcv collision count */
1103 pr_debug(" receiving packet size 0x%X rx_status"
1104 " 0x%X.\n", pkt_len, rx_status);
1106 skb = netdev_alloc_skb(dev, pkt_len + 2);
1109 skb_reserve(skb, 2);
1110 insw(ioaddr + AM2150_RCV, skb_put(skb, pkt_len), pkt_len>>1);
1112 *(skb_tail_pointer(skb) - 1) = inb(ioaddr + AM2150_RCV);
1113 skb->protocol = eth_type_trans(skb, dev);
1115 netif_rx(skb); /* Send the packet to the upper (protocol) layers. */
1117 lp->linux_stats.rx_packets++;
1118 lp->linux_stats.rx_bytes += pkt_len;
1119 outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
1122 pr_debug("%s: couldn't allocate a sk_buff of size"
1123 " %d.\n", dev->name, pkt_len);
1124 lp->linux_stats.rx_dropped++;
1127 outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
1133 /* ----------------------------------------------------------------------------
1135 ---------------------------------------------------------------------------- */
1136 static void pr_linux_stats(struct net_device_stats *pstats)
1138 pr_debug("pr_linux_stats\n");
1139 pr_debug(" rx_packets=%-7ld tx_packets=%ld\n",
1140 (long)pstats->rx_packets, (long)pstats->tx_packets);
1141 pr_debug(" rx_errors=%-7ld tx_errors=%ld\n",
1142 (long)pstats->rx_errors, (long)pstats->tx_errors);
1143 pr_debug(" rx_dropped=%-7ld tx_dropped=%ld\n",
1144 (long)pstats->rx_dropped, (long)pstats->tx_dropped);
1145 pr_debug(" multicast=%-7ld collisions=%ld\n",
1146 (long)pstats->multicast, (long)pstats->collisions);
1148 pr_debug(" rx_length_errors=%-7ld rx_over_errors=%ld\n",
1149 (long)pstats->rx_length_errors, (long)pstats->rx_over_errors);
1150 pr_debug(" rx_crc_errors=%-7ld rx_frame_errors=%ld\n",
1151 (long)pstats->rx_crc_errors, (long)pstats->rx_frame_errors);
1152 pr_debug(" rx_fifo_errors=%-7ld rx_missed_errors=%ld\n",
1153 (long)pstats->rx_fifo_errors, (long)pstats->rx_missed_errors);
1155 pr_debug(" tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n",
1156 (long)pstats->tx_aborted_errors, (long)pstats->tx_carrier_errors);
1157 pr_debug(" tx_fifo_errors=%-7ld tx_heartbeat_errors=%ld\n",
1158 (long)pstats->tx_fifo_errors, (long)pstats->tx_heartbeat_errors);
1159 pr_debug(" tx_window_errors=%ld\n",
1160 (long)pstats->tx_window_errors);
1161 } /* pr_linux_stats */
1163 /* ----------------------------------------------------------------------------
1165 ---------------------------------------------------------------------------- */
1166 static void pr_mace_stats(mace_statistics *pstats)
1168 pr_debug("pr_mace_stats\n");
1170 pr_debug(" xmtsv=%-7d uflo=%d\n",
1171 pstats->xmtsv, pstats->uflo);
1172 pr_debug(" lcol=%-7d more=%d\n",
1173 pstats->lcol, pstats->more);
1174 pr_debug(" one=%-7d defer=%d\n",
1175 pstats->one, pstats->defer);
1176 pr_debug(" lcar=%-7d rtry=%d\n",
1177 pstats->lcar, pstats->rtry);
1180 pr_debug(" exdef=%-7d xmtrc=%d\n",
1181 pstats->exdef, pstats->xmtrc);
1183 /* RFS1--Receive Status (RCVSTS) */
1184 pr_debug(" oflo=%-7d clsn=%d\n",
1185 pstats->oflo, pstats->clsn);
1186 pr_debug(" fram=%-7d fcs=%d\n",
1187 pstats->fram, pstats->fcs);
1189 /* RFS2--Runt Packet Count (RNTPC) */
1190 /* RFS3--Receive Collision Count (RCVCC) */
1191 pr_debug(" rfs_rntpc=%-7d rfs_rcvcc=%d\n",
1192 pstats->rfs_rntpc, pstats->rfs_rcvcc);
1195 pr_debug(" jab=%-7d babl=%d\n",
1196 pstats->jab, pstats->babl);
1197 pr_debug(" cerr=%-7d rcvcco=%d\n",
1198 pstats->cerr, pstats->rcvcco);
1199 pr_debug(" rntpco=%-7d mpco=%d\n",
1200 pstats->rntpco, pstats->mpco);
1203 pr_debug(" mpc=%d\n", pstats->mpc);
1206 pr_debug(" rntpc=%d\n", pstats->rntpc);
1209 pr_debug(" rcvcc=%d\n", pstats->rcvcc);
1211 } /* pr_mace_stats */
1213 /* ----------------------------------------------------------------------------
1215 Update statistics. We change to register window 1, so this
1216 should be run single-threaded if the device is active. This is
1217 expected to be a rare operation, and it's simpler for the rest
1218 of the driver to assume that window 0 is always valid rather
1219 than use a special window-state variable.
1221 oflo & uflo should _never_ occur since it would mean the Xilinx
1222 was not able to transfer data between the MACE FIFO and the
1223 card's SRAM fast enough. If this happens, something is
1224 seriously wrong with the hardware.
1225 ---------------------------------------------------------------------------- */
1226 static void update_stats(unsigned int ioaddr, struct net_device *dev)
1228 mace_private *lp = netdev_priv(dev);
1230 lp->mace_stats.rcvcc += mace_read(lp, ioaddr, MACE_RCVCC);
1231 lp->mace_stats.rntpc += mace_read(lp, ioaddr, MACE_RNTPC);
1232 lp->mace_stats.mpc += mace_read(lp, ioaddr, MACE_MPC);
1233 /* At this point, mace_stats is fully updated for this call.
1234 We may now update the linux_stats. */
1236 /* The MACE has no equivalent for linux_stats field which are commented
1239 /* lp->linux_stats.multicast; */
1240 lp->linux_stats.collisions =
1241 lp->mace_stats.rcvcco * 256 + lp->mace_stats.rcvcc;
1242 /* Collision: The MACE may retry sending a packet 15 times
1243 before giving up. The retry count is in XMTRC.
1244 Does each retry constitute a collision?
1245 If so, why doesn't the RCVCC record these collisions? */
1247 /* detailed rx_errors: */
1248 lp->linux_stats.rx_length_errors =
1249 lp->mace_stats.rntpco * 256 + lp->mace_stats.rntpc;
1250 /* lp->linux_stats.rx_over_errors */
1251 lp->linux_stats.rx_crc_errors = lp->mace_stats.fcs;
1252 lp->linux_stats.rx_frame_errors = lp->mace_stats.fram;
1253 lp->linux_stats.rx_fifo_errors = lp->mace_stats.oflo;
1254 lp->linux_stats.rx_missed_errors =
1255 lp->mace_stats.mpco * 256 + lp->mace_stats.mpc;
1257 /* detailed tx_errors */
1258 lp->linux_stats.tx_aborted_errors = lp->mace_stats.rtry;
1259 lp->linux_stats.tx_carrier_errors = lp->mace_stats.lcar;
1260 /* LCAR usually results from bad cabling. */
1261 lp->linux_stats.tx_fifo_errors = lp->mace_stats.uflo;
1262 lp->linux_stats.tx_heartbeat_errors = lp->mace_stats.cerr;
1263 /* lp->linux_stats.tx_window_errors; */
1264 } /* update_stats */
1266 /* ----------------------------------------------------------------------------
1268 Gathers ethernet statistics from the MACE chip.
1269 ---------------------------------------------------------------------------- */
1270 static struct net_device_stats *mace_get_stats(struct net_device *dev)
1272 mace_private *lp = netdev_priv(dev);
1274 update_stats(dev->base_addr, dev);
1276 pr_debug("%s: updating the statistics.\n", dev->name);
1277 pr_linux_stats(&lp->linux_stats);
1278 pr_mace_stats(&lp->mace_stats);
1280 return &lp->linux_stats;
1281 } /* net_device_stats */
1283 /* ----------------------------------------------------------------------------
1285 Modified from Am79C90 data sheet.
1286 ---------------------------------------------------------------------------- */
1288 #ifdef BROKEN_MULTICAST
1290 static void updateCRC(int *CRC, int bit)
1292 static const int poly[]={
1297 }; /* CRC polynomial. poly[n] = coefficient of the x**n term of the
1298 CRC generator polynomial. */
1302 /* shift CRC and control bit (CRC[32]) */
1303 for (j = 32; j > 0; j--)
1307 /* If bit XOR(control bit) = 1, set CRC = CRC XOR polynomial. */
1309 for (j = 0; j < 32; j++)
1313 /* ----------------------------------------------------------------------------
1315 Build logical address filter.
1316 Modified from Am79C90 data sheet.
1319 ladrf: logical address filter (contents initialized to 0)
1320 adr: ethernet address
1321 ---------------------------------------------------------------------------- */
1322 static void BuildLAF(int *ladrf, int *adr)
1324 int CRC[33]={1}; /* CRC register, 1 word/bit + extra control bit */
1326 int i, byte; /* temporary array indices */
1327 int hashcode; /* the output object */
1331 for (byte = 0; byte < 6; byte++)
1332 for (i = 0; i < 8; i++)
1333 updateCRC(CRC, (adr[byte] >> i) & 1);
1336 for (i = 0; i < 6; i++)
1337 hashcode = (hashcode << 1) + CRC[i];
1339 byte = hashcode >> 3;
1340 ladrf[byte] |= (1 << (hashcode & 7));
1344 printk(KERN_DEBUG " adr =%pM\n", adr);
1345 printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode);
1346 for (i = 0; i < 8; i++)
1347 pr_cont(" %02X", ladrf[i]);
1352 /* ----------------------------------------------------------------------------
1353 restore_multicast_list
1354 Restores the multicast filter for MACE chip to the last
1355 set_multicast_list() call.
1360 ---------------------------------------------------------------------------- */
1361 static void restore_multicast_list(struct net_device *dev)
1363 mace_private *lp = netdev_priv(dev);
1364 int num_addrs = lp->multicast_num_addrs;
1365 int *ladrf = lp->multicast_ladrf;
1366 unsigned int ioaddr = dev->base_addr;
1369 pr_debug("%s: restoring Rx mode to %d addresses.\n",
1370 dev->name, num_addrs);
1372 if (num_addrs > 0) {
1374 pr_debug("Attempt to restore multicast list detected.\n");
1376 mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_LOGADDR);
1377 /* Poll ADDRCHG bit */
1378 while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
1380 /* Set LADRF register */
1381 for (i = 0; i < MACE_LADRF_LEN; i++)
1382 mace_write(lp, ioaddr, MACE_LADRF, ladrf[i]);
1384 mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_RCVFCSE | MACE_UTR_LOOP_EXTERNAL);
1385 mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1387 } else if (num_addrs < 0) {
1389 /* Promiscuous mode: receive all packets */
1390 mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1391 mace_write(lp, ioaddr, MACE_MACCC,
1392 MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
1398 mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1399 mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1402 } /* restore_multicast_list */
1404 /* ----------------------------------------------------------------------------
1406 Set or clear the multicast filter for this adaptor.
1409 num_addrs == -1 Promiscuous mode, receive all packets
1410 num_addrs == 0 Normal mode, clear multicast list
1411 num_addrs > 0 Multicast mode, receive normal and MC packets, and do
1412 best-effort filtering.
1416 ---------------------------------------------------------------------------- */
1418 static void set_multicast_list(struct net_device *dev)
1420 mace_private *lp = netdev_priv(dev);
1421 int adr[ETH_ALEN] = {0}; /* Ethernet address */
1422 struct netdev_hw_addr *ha;
1427 if (netdev_mc_count(dev) != old) {
1428 old = netdev_mc_count(dev);
1429 pr_debug("%s: setting Rx mode to %d addresses.\n",
1435 /* Set multicast_num_addrs. */
1436 lp->multicast_num_addrs = netdev_mc_count(dev);
1438 /* Set multicast_ladrf. */
1439 if (num_addrs > 0) {
1440 /* Calculate multicast logical address filter */
1441 memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN);
1442 netdev_for_each_mc_addr(ha, dev) {
1443 memcpy(adr, ha->addr, ETH_ALEN);
1444 BuildLAF(lp->multicast_ladrf, adr);
1448 restore_multicast_list(dev);
1450 } /* set_multicast_list */
1452 #endif /* BROKEN_MULTICAST */
1454 static void restore_multicast_list(struct net_device *dev)
1456 unsigned int ioaddr = dev->base_addr;
1457 mace_private *lp = netdev_priv(dev);
1459 pr_debug("%s: restoring Rx mode to %d addresses.\n", dev->name,
1460 lp->multicast_num_addrs);
1462 if (dev->flags & IFF_PROMISC) {
1463 /* Promiscuous mode: receive all packets */
1464 mace_write(lp,ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1465 mace_write(lp, ioaddr, MACE_MACCC,
1466 MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
1470 mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1471 mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1473 } /* restore_multicast_list */
1475 static void set_multicast_list(struct net_device *dev)
1477 mace_private *lp = netdev_priv(dev);
1482 if (netdev_mc_count(dev) != old) {
1483 old = netdev_mc_count(dev);
1484 pr_debug("%s: setting Rx mode to %d addresses.\n",
1490 lp->multicast_num_addrs = netdev_mc_count(dev);
1491 restore_multicast_list(dev);
1493 } /* set_multicast_list */
1495 static const struct pcmcia_device_id nmclan_ids[] = {
1496 PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941),
1497 PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf),
1500 MODULE_DEVICE_TABLE(pcmcia, nmclan_ids);
1502 static struct pcmcia_driver nmclan_cs_driver = {
1503 .owner = THIS_MODULE,
1504 .name = "nmclan_cs",
1505 .probe = nmclan_probe,
1506 .remove = nmclan_detach,
1507 .id_table = nmclan_ids,
1508 .suspend = nmclan_suspend,
1509 .resume = nmclan_resume,
1511 module_pcmcia_driver(nmclan_cs_driver);