drivers/net/dsa/vitesse-vsc73xx-core.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /* DSA driver for:
   3  * Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
   4  * Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
   5  * Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
   6  * Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
   7  *
   8  * These switches have a built-in 8051 CPU and can download and execute a
   9  * firmware in this CPU. They can also be configured to use an external CPU
  10  * handling the switch in a memory-mapped manner by connecting to that external
  11  * CPU's memory bus.
  12  *
  13  * Copyright (C) 2018 Linus Wallej <linus.walleij@linaro.org>
  14  * Includes portions of code from the firmware uploader by:
  15  * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
  16  */
  17 #include <linux/kernel.h>
  18 #include <linux/module.h>
  19 #include <linux/device.h>
  20 #include <linux/of.h>
  21 #include <linux/of_device.h>
  22 #include <linux/of_mdio.h>
  23 #include <linux/bitops.h>
  24 #include <linux/if_bridge.h>
  25 #include <linux/etherdevice.h>
  26 #include <linux/gpio/consumer.h>
  27 #include <linux/gpio/driver.h>
  28 #include <linux/random.h>
  29 #include <net/dsa.h>
  30
  31 #include "vitesse-vsc73xx.h"
  32
  33 #define VSC73XX_BLOCK_MAC       0x1 /* Subblocks 0-4, 6 (CPU port) */
  34 #define VSC73XX_BLOCK_ANALYZER  0x2 /* Only subblock 0 */
  35 #define VSC73XX_BLOCK_MII       0x3 /* Subblocks 0 and 1 */
  36 #define VSC73XX_BLOCK_MEMINIT   0x3 /* Only subblock 2 */
  37 #define VSC73XX_BLOCK_CAPTURE   0x4 /* Only subblock 2 */
  38 #define VSC73XX_BLOCK_ARBITER   0x5 /* Only subblock 0 */
  39 #define VSC73XX_BLOCK_SYSTEM    0x7 /* Only subblock 0 */
  40
  41 #define CPU_PORT        6 /* CPU port */
  42
  43 /* MAC Block registers */
  44 #define VSC73XX_MAC_CFG         0x00
  45 #define VSC73XX_MACHDXGAP       0x02
  46 #define VSC73XX_FCCONF          0x04
  47 #define VSC73XX_FCMACHI         0x08
  48 #define VSC73XX_FCMACLO         0x0c
  49 #define VSC73XX_MAXLEN          0x10
  50 #define VSC73XX_ADVPORTM        0x19
  51 #define VSC73XX_TXUPDCFG        0x24
  52 #define VSC73XX_TXQ_SELECT_CFG  0x28
  53 #define VSC73XX_RXOCT           0x50
  54 #define VSC73XX_TXOCT           0x51
  55 #define VSC73XX_C_RX0           0x52
  56 #define VSC73XX_C_RX1           0x53
  57 #define VSC73XX_C_RX2           0x54
  58 #define VSC73XX_C_TX0           0x55
  59 #define VSC73XX_C_TX1           0x56
  60 #define VSC73XX_C_TX2           0x57
  61 #define VSC73XX_C_CFG           0x58
  62 #define VSC73XX_CAT_DROP        0x6e
  63 #define VSC73XX_CAT_PR_MISC_L2  0x6f
  64 #define VSC73XX_CAT_PR_USR_PRIO 0x75
  65 #define VSC73XX_Q_MISC_CONF     0xdf
  66
  67 /* MAC_CFG register bits */
  68 #define VSC73XX_MAC_CFG_WEXC_DIS        BIT(31)
  69 #define VSC73XX_MAC_CFG_PORT_RST        BIT(29)
  70 #define VSC73XX_MAC_CFG_TX_EN           BIT(28)
  71 #define VSC73XX_MAC_CFG_SEED_LOAD       BIT(27)
  72 #define VSC73XX_MAC_CFG_SEED_MASK       GENMASK(26, 19)
  73 #define VSC73XX_MAC_CFG_SEED_OFFSET     19
  74 #define VSC73XX_MAC_CFG_FDX             BIT(18)
  75 #define VSC73XX_MAC_CFG_GIGA_MODE       BIT(17)
  76 #define VSC73XX_MAC_CFG_RX_EN           BIT(16)
  77 #define VSC73XX_MAC_CFG_VLAN_DBLAWR     BIT(15)
  78 #define VSC73XX_MAC_CFG_VLAN_AWR        BIT(14)
  79 #define VSC73XX_MAC_CFG_100_BASE_T      BIT(13) /* Not in manual */
  80 #define VSC73XX_MAC_CFG_TX_IPG_MASK     GENMASK(10, 6)
  81 #define VSC73XX_MAC_CFG_TX_IPG_OFFSET   6
  82 #define VSC73XX_MAC_CFG_TX_IPG_1000M    (6 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
  83 #define VSC73XX_MAC_CFG_TX_IPG_100_10M  (17 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
  84 #define VSC73XX_MAC_CFG_MAC_RX_RST      BIT(5)
  85 #define VSC73XX_MAC_CFG_MAC_TX_RST      BIT(4)
  86 #define VSC73XX_MAC_CFG_CLK_SEL_MASK    GENMASK(2, 0)
  87 #define VSC73XX_MAC_CFG_CLK_SEL_OFFSET  0
  88 #define VSC73XX_MAC_CFG_CLK_SEL_1000M   1
  89 #define VSC73XX_MAC_CFG_CLK_SEL_100M    2
  90 #define VSC73XX_MAC_CFG_CLK_SEL_10M     3
  91 #define VSC73XX_MAC_CFG_CLK_SEL_EXT     4
  92
  93 #define VSC73XX_MAC_CFG_1000M_F_PHY     (VSC73XX_MAC_CFG_FDX | \
  94                                          VSC73XX_MAC_CFG_GIGA_MODE | \
  95                                          VSC73XX_MAC_CFG_TX_IPG_1000M | \
  96                                          VSC73XX_MAC_CFG_CLK_SEL_EXT)
  97 #define VSC73XX_MAC_CFG_100_10M_F_PHY   (VSC73XX_MAC_CFG_FDX | \
  98                                          VSC73XX_MAC_CFG_TX_IPG_100_10M | \
  99                                          VSC73XX_MAC_CFG_CLK_SEL_EXT)
 100 #define VSC73XX_MAC_CFG_100_10M_H_PHY   (VSC73XX_MAC_CFG_TX_IPG_100_10M | \
 101                                          VSC73XX_MAC_CFG_CLK_SEL_EXT)
 102 #define VSC73XX_MAC_CFG_1000M_F_RGMII   (VSC73XX_MAC_CFG_FDX | \
 103                                          VSC73XX_MAC_CFG_GIGA_MODE | \
 104                                          VSC73XX_MAC_CFG_TX_IPG_1000M | \
 105                                          VSC73XX_MAC_CFG_CLK_SEL_1000M)
 106 #define VSC73XX_MAC_CFG_RESET           (VSC73XX_MAC_CFG_PORT_RST | \
 107                                          VSC73XX_MAC_CFG_MAC_RX_RST | \
 108                                          VSC73XX_MAC_CFG_MAC_TX_RST)
 109
 110 /* Flow control register bits */
 111 #define VSC73XX_FCCONF_ZERO_PAUSE_EN    BIT(17)
 112 #define VSC73XX_FCCONF_FLOW_CTRL_OBEY   BIT(16)
 113 #define VSC73XX_FCCONF_PAUSE_VAL_MASK   GENMASK(15, 0)
 114
 115 /* ADVPORTM advanced port setup register bits */
 116 #define VSC73XX_ADVPORTM_IFG_PPM        BIT(7)
 117 #define VSC73XX_ADVPORTM_EXC_COL_CONT   BIT(6)
 118 #define VSC73XX_ADVPORTM_EXT_PORT       BIT(5)
 119 #define VSC73XX_ADVPORTM_INV_GTX        BIT(4)
 120 #define VSC73XX_ADVPORTM_ENA_GTX        BIT(3)
 121 #define VSC73XX_ADVPORTM_DDR_MODE       BIT(2)
 122 #define VSC73XX_ADVPORTM_IO_LOOPBACK    BIT(1)
 123 #define VSC73XX_ADVPORTM_HOST_LOOPBACK  BIT(0)
 124
 125 /* CAT_DROP categorizer frame dropping register bits */
 126 #define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA       BIT(6)
 127 #define VSC73XX_CAT_DROP_FWD_CTRL_ENA           BIT(4)
 128 #define VSC73XX_CAT_DROP_FWD_PAUSE_ENA          BIT(3)
 129 #define VSC73XX_CAT_DROP_UNTAGGED_ENA           BIT(2)
 130 #define VSC73XX_CAT_DROP_TAGGED_ENA             BIT(1)
 131 #define VSC73XX_CAT_DROP_NULL_MAC_ENA           BIT(0)
 132
 133 #define VSC73XX_Q_MISC_CONF_EXTENT_MEM          BIT(31)
 134 #define VSC73XX_Q_MISC_CONF_EARLY_TX_MASK       GENMASK(4, 1)
 135 #define VSC73XX_Q_MISC_CONF_EARLY_TX_512        (1 << 1)
 136 #define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE      BIT(0)
 137
 138 /* Frame analyzer block 2 registers */
 139 #define VSC73XX_STORMLIMIT      0x02
 140 #define VSC73XX_ADVLEARN        0x03
 141 #define VSC73XX_IFLODMSK        0x04
 142 #define VSC73XX_VLANMASK        0x05
 143 #define VSC73XX_MACHDATA        0x06
 144 #define VSC73XX_MACLDATA        0x07
 145 #define VSC73XX_ANMOVED         0x08
 146 #define VSC73XX_ANAGEFIL        0x09
 147 #define VSC73XX_ANEVENTS        0x0a
 148 #define VSC73XX_ANCNTMASK       0x0b
 149 #define VSC73XX_ANCNTVAL        0x0c
 150 #define VSC73XX_LEARNMASK       0x0d
 151 #define VSC73XX_UFLODMASK       0x0e
 152 #define VSC73XX_MFLODMASK       0x0f
 153 #define VSC73XX_RECVMASK        0x10
 154 #define VSC73XX_AGGRCTRL        0x20
 155 #define VSC73XX_AGGRMSKS        0x30 /* Until 0x3f */
 156 #define VSC73XX_DSTMASKS        0x40 /* Until 0x7f */
 157 #define VSC73XX_SRCMASKS        0x80 /* Until 0x87 */
 158 #define VSC73XX_CAPENAB         0xa0
 159 #define VSC73XX_MACACCESS       0xb0
 160 #define VSC73XX_IPMCACCESS      0xb1
 161 #define VSC73XX_MACTINDX        0xc0
 162 #define VSC73XX_VLANACCESS      0xd0
 163 #define VSC73XX_VLANTIDX        0xe0
 164 #define VSC73XX_AGENCTRL        0xf0
 165 #define VSC73XX_CAPRST          0xff
 166
 167 #define VSC73XX_MACACCESS_CPU_COPY              BIT(14)
 168 #define VSC73XX_MACACCESS_FWD_KILL              BIT(13)
 169 #define VSC73XX_MACACCESS_IGNORE_VLAN           BIT(12)
 170 #define VSC73XX_MACACCESS_AGED_FLAG             BIT(11)
 171 #define VSC73XX_MACACCESS_VALID                 BIT(10)
 172 #define VSC73XX_MACACCESS_LOCKED                BIT(9)
 173 #define VSC73XX_MACACCESS_DEST_IDX_MASK         GENMASK(8, 3)
 174 #define VSC73XX_MACACCESS_CMD_MASK              GENMASK(2, 0)
 175 #define VSC73XX_MACACCESS_CMD_IDLE              0
 176 #define VSC73XX_MACACCESS_CMD_LEARN             1
 177 #define VSC73XX_MACACCESS_CMD_FORGET            2
 178 #define VSC73XX_MACACCESS_CMD_AGE_TABLE         3
 179 #define VSC73XX_MACACCESS_CMD_FLUSH_TABLE       4
 180 #define VSC73XX_MACACCESS_CMD_CLEAR_TABLE       5
 181 #define VSC73XX_MACACCESS_CMD_READ_ENTRY        6
 182 #define VSC73XX_MACACCESS_CMD_WRITE_ENTRY       7
 183
 184 #define VSC73XX_VLANACCESS_LEARN_DISABLED       BIT(30)
 185 #define VSC73XX_VLANACCESS_VLAN_MIRROR          BIT(29)
 186 #define VSC73XX_VLANACCESS_VLAN_SRC_CHECK       BIT(28)
 187 #define VSC73XX_VLANACCESS_VLAN_PORT_MASK       GENMASK(9, 2)
 188 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK    GENMASK(2, 0)
 189 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE    0
 190 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY      1
 191 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY     2
 192 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE     3
 193
 194 /* MII block 3 registers */
 195 #define VSC73XX_MII_STAT        0x0
 196 #define VSC73XX_MII_CMD         0x1
 197 #define VSC73XX_MII_DATA        0x2
 198
 199 /* Arbiter block 5 registers */
 200 #define VSC73XX_ARBEMPTY                0x0c
 201 #define VSC73XX_ARBDISC                 0x0e
 202 #define VSC73XX_SBACKWDROP              0x12
 203 #define VSC73XX_DBACKWDROP              0x13
 204 #define VSC73XX_ARBBURSTPROB            0x15
 205
 206 /* System block 7 registers */
 207 #define VSC73XX_ICPU_SIPAD              0x01
 208 #define VSC73XX_GMIIDELAY               0x05
 209 #define VSC73XX_ICPU_CTRL               0x10
 210 #define VSC73XX_ICPU_ADDR               0x11
 211 #define VSC73XX_ICPU_SRAM               0x12
 212 #define VSC73XX_HWSEM                   0x13
 213 #define VSC73XX_GLORESET                0x14
 214 #define VSC73XX_ICPU_MBOX_VAL           0x15
 215 #define VSC73XX_ICPU_MBOX_SET           0x16
 216 #define VSC73XX_ICPU_MBOX_CLR           0x17
 217 #define VSC73XX_CHIPID                  0x18
 218 #define VSC73XX_GPIO                    0x34
 219
 220 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_NONE   0
 221 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_4_NS 1
 222 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_7_NS 2
 223 #define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS 3
 224
 225 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_NONE    (0 << 4)
 226 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_4_NS  (1 << 4)
 227 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_7_NS  (2 << 4)
 228 #define VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS  (3 << 4)
 229
 230 #define VSC73XX_ICPU_CTRL_WATCHDOG_RST  BIT(31)
 231 #define VSC73XX_ICPU_CTRL_CLK_DIV_MASK  GENMASK(12, 8)
 232 #define VSC73XX_ICPU_CTRL_SRST_HOLD     BIT(7)
 233 #define VSC73XX_ICPU_CTRL_ICPU_PI_EN    BIT(6)
 234 #define VSC73XX_ICPU_CTRL_BOOT_EN       BIT(3)
 235 #define VSC73XX_ICPU_CTRL_EXT_ACC_EN    BIT(2)
 236 #define VSC73XX_ICPU_CTRL_CLK_EN        BIT(1)
 237 #define VSC73XX_ICPU_CTRL_SRST          BIT(0)
 238
 239 #define VSC73XX_CHIPID_ID_SHIFT         12
 240 #define VSC73XX_CHIPID_ID_MASK          0xffff
 241 #define VSC73XX_CHIPID_REV_SHIFT        28
 242 #define VSC73XX_CHIPID_REV_MASK         0xf
 243 #define VSC73XX_CHIPID_ID_7385          0x7385
 244 #define VSC73XX_CHIPID_ID_7388          0x7388
 245 #define VSC73XX_CHIPID_ID_7395          0x7395
 246 #define VSC73XX_CHIPID_ID_7398          0x7398
 247
 248 #define VSC73XX_GLORESET_STROBE         BIT(4)
 249 #define VSC73XX_GLORESET_ICPU_LOCK      BIT(3)
 250 #define VSC73XX_GLORESET_MEM_LOCK       BIT(2)
 251 #define VSC73XX_GLORESET_PHY_RESET      BIT(1)
 252 #define VSC73XX_GLORESET_MASTER_RESET   BIT(0)
 253
 254 #define VSC7385_CLOCK_DELAY             ((3 << 4) | 3)
 255 #define VSC7385_CLOCK_DELAY_MASK        ((3 << 4) | 3)
 256
 257 #define VSC73XX_ICPU_CTRL_STOP  (VSC73XX_ICPU_CTRL_SRST_HOLD | \
 258                                  VSC73XX_ICPU_CTRL_BOOT_EN | \
 259                                  VSC73XX_ICPU_CTRL_EXT_ACC_EN)
 260
 261 #define VSC73XX_ICPU_CTRL_START (VSC73XX_ICPU_CTRL_CLK_DIV | \
 262                                  VSC73XX_ICPU_CTRL_BOOT_EN | \
 263                                  VSC73XX_ICPU_CTRL_CLK_EN | \
 264                                  VSC73XX_ICPU_CTRL_SRST)
 265
 266 #define IS_7385(a) ((a)->chipid == VSC73XX_CHIPID_ID_7385)
 267 #define IS_7388(a) ((a)->chipid == VSC73XX_CHIPID_ID_7388)
 268 #define IS_7395(a) ((a)->chipid == VSC73XX_CHIPID_ID_7395)
 269 #define IS_7398(a) ((a)->chipid == VSC73XX_CHIPID_ID_7398)
 270 #define IS_739X(a) (IS_7395(a) || IS_7398(a))
 271
 272 struct vsc73xx_counter {
 273         u8 counter;
 274         const char *name;
 275 };
 276
 277 /* Counters are named according to the MIB standards where applicable.
 278  * Some counters are custom, non-standard. The standard counters are
 279  * named in accordance with RFC2819, RFC2021 and IEEE Std 802.3-2002 Annex
 280  * 30A Counters.
 281  */
 282 static const struct vsc73xx_counter vsc73xx_rx_counters[] = {
 283         { 0, "RxEtherStatsPkts" },
 284         { 1, "RxBroadcast+MulticastPkts" }, /* non-standard counter */
 285         { 2, "RxTotalErrorPackets" }, /* non-standard counter */
 286         { 3, "RxEtherStatsBroadcastPkts" },
 287         { 4, "RxEtherStatsMulticastPkts" },
 288         { 5, "RxEtherStatsPkts64Octets" },
 289         { 6, "RxEtherStatsPkts65to127Octets" },
 290         { 7, "RxEtherStatsPkts128to255Octets" },
 291         { 8, "RxEtherStatsPkts256to511Octets" },
 292         { 9, "RxEtherStatsPkts512to1023Octets" },
 293         { 10, "RxEtherStatsPkts1024to1518Octets" },
 294         { 11, "RxJumboFrames" }, /* non-standard counter */
 295         { 12, "RxaPauseMACControlFramesTransmitted" },
 296         { 13, "RxFIFODrops" }, /* non-standard counter */
 297         { 14, "RxBackwardDrops" }, /* non-standard counter */
 298         { 15, "RxClassifierDrops" }, /* non-standard counter */
 299         { 16, "RxEtherStatsCRCAlignErrors" },
 300         { 17, "RxEtherStatsUndersizePkts" },
 301         { 18, "RxEtherStatsOversizePkts" },
 302         { 19, "RxEtherStatsFragments" },
 303         { 20, "RxEtherStatsJabbers" },
 304         { 21, "RxaMACControlFramesReceived" },
 305         /* 22-24 are undefined */
 306         { 25, "RxaFramesReceivedOK" },
 307         { 26, "RxQoSClass0" }, /* non-standard counter */
 308         { 27, "RxQoSClass1" }, /* non-standard counter */
 309         { 28, "RxQoSClass2" }, /* non-standard counter */
 310         { 29, "RxQoSClass3" }, /* non-standard counter */
 311 };
 312
 313 static const struct vsc73xx_counter vsc73xx_tx_counters[] = {
 314         { 0, "TxEtherStatsPkts" },
 315         { 1, "TxBroadcast+MulticastPkts" }, /* non-standard counter */
 316         { 2, "TxTotalErrorPackets" }, /* non-standard counter */
 317         { 3, "TxEtherStatsBroadcastPkts" },
 318         { 4, "TxEtherStatsMulticastPkts" },
 319         { 5, "TxEtherStatsPkts64Octets" },
 320         { 6, "TxEtherStatsPkts65to127Octets" },
 321         { 7, "TxEtherStatsPkts128to255Octets" },
 322         { 8, "TxEtherStatsPkts256to511Octets" },
 323         { 9, "TxEtherStatsPkts512to1023Octets" },
 324         { 10, "TxEtherStatsPkts1024to1518Octets" },
 325         { 11, "TxJumboFrames" }, /* non-standard counter */
 326         { 12, "TxaPauseMACControlFramesTransmitted" },
 327         { 13, "TxFIFODrops" }, /* non-standard counter */
 328         { 14, "TxDrops" }, /* non-standard counter */
 329         { 15, "TxEtherStatsCollisions" },
 330         { 16, "TxEtherStatsCRCAlignErrors" },
 331         { 17, "TxEtherStatsUndersizePkts" },
 332         { 18, "TxEtherStatsOversizePkts" },
 333         { 19, "TxEtherStatsFragments" },
 334         { 20, "TxEtherStatsJabbers" },
 335         /* 21-24 are undefined */
 336         { 25, "TxaFramesReceivedOK" },
 337         { 26, "TxQoSClass0" }, /* non-standard counter */
 338         { 27, "TxQoSClass1" }, /* non-standard counter */
 339         { 28, "TxQoSClass2" }, /* non-standard counter */
 340         { 29, "TxQoSClass3" }, /* non-standard counter */
 341 };
 342
 343 int vsc73xx_is_addr_valid(u8 block, u8 subblock)
 344 {
 345         switch (block) {
 346         case VSC73XX_BLOCK_MAC:
 347                 switch (subblock) {
 348                 case 0 ... 4:
 349                 case 6:
 350                         return 1;
 351                 }
 352                 break;
 353
 354         case VSC73XX_BLOCK_ANALYZER:
 355         case VSC73XX_BLOCK_SYSTEM:
 356                 switch (subblock) {
 357                 case 0:
 358                         return 1;
 359                 }
 360                 break;
 361
 362         case VSC73XX_BLOCK_MII:
 363         case VSC73XX_BLOCK_CAPTURE:
 364         case VSC73XX_BLOCK_ARBITER:
 365                 switch (subblock) {
 366                 case 0 ... 1:
 367                         return 1;
 368                 }
 369                 break;
 370         }
 371
 372         return 0;
 373 }
 374 EXPORT_SYMBOL(vsc73xx_is_addr_valid);
 375
 376 static int vsc73xx_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
 377                         u32 *val)
 378 {
 379         return vsc->ops->read(vsc, block, subblock, reg, val);
 380 }
 381
 382 static int vsc73xx_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
 383                          u32 val)
 384 {
 385         return vsc->ops->write(vsc, block, subblock, reg, val);
 386 }
 387
 388 static int vsc73xx_update_bits(struct vsc73xx *vsc, u8 block, u8 subblock,
 389                                u8 reg, u32 mask, u32 val)
 390 {
 391         u32 tmp, orig;
 392         int ret;
 393
 394         /* Same read-modify-write algorithm as e.g. regmap */
 395         ret = vsc73xx_read(vsc, block, subblock, reg, &orig);
 396         if (ret)
 397                 return ret;
 398         tmp = orig & ~mask;
 399         tmp |= val & mask;
 400         return vsc73xx_write(vsc, block, subblock, reg, tmp);
 401 }
 402
 403 static int vsc73xx_detect(struct vsc73xx *vsc)
 404 {
 405         bool icpu_si_boot_en;
 406         bool icpu_pi_en;
 407         u32 val;
 408         u32 rev;
 409         int ret;
 410         u32 id;
 411
 412         ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
 413                            VSC73XX_ICPU_MBOX_VAL, &val);
 414         if (ret) {
 415                 dev_err(vsc->dev, "unable to read mailbox (%d)\n", ret);
 416                 return ret;
 417         }
 418
 419         if (val == 0xffffffff) {
 420                 dev_info(vsc->dev, "chip seems dead.\n");
 421                 return -EAGAIN;
 422         }
 423
 424         ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
 425                            VSC73XX_CHIPID, &val);
 426         if (ret) {
 427                 dev_err(vsc->dev, "unable to read chip id (%d)\n", ret);
 428                 return ret;
 429         }
 430
 431         id = (val >> VSC73XX_CHIPID_ID_SHIFT) &
 432                 VSC73XX_CHIPID_ID_MASK;
 433         switch (id) {
 434         case VSC73XX_CHIPID_ID_7385:
 435         case VSC73XX_CHIPID_ID_7388:
 436         case VSC73XX_CHIPID_ID_7395:
 437         case VSC73XX_CHIPID_ID_7398:
 438                 break;
 439         default:
 440                 dev_err(vsc->dev, "unsupported chip, id=%04x\n", id);
 441                 return -ENODEV;
 442         }
 443
 444         vsc->chipid = id;
 445         rev = (val >> VSC73XX_CHIPID_REV_SHIFT) &
 446                 VSC73XX_CHIPID_REV_MASK;
 447         dev_info(vsc->dev, "VSC%04X (rev: %d) switch found\n", id, rev);
 448
 449         ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
 450                            VSC73XX_ICPU_CTRL, &val);
 451         if (ret) {
 452                 dev_err(vsc->dev, "unable to read iCPU control\n");
 453                 return ret;
 454         }
 455
 456         /* The iCPU can always be used but can boot in different ways.
 457          * If it is initially disabled and has no external memory,
 458          * we are in control and can do whatever we like, else we
 459          * are probably in trouble (we need some way to communicate
 460          * with the running firmware) so we bail out for now.
 461          */
 462         icpu_pi_en = !!(val & VSC73XX_ICPU_CTRL_ICPU_PI_EN);
 463         icpu_si_boot_en = !!(val & VSC73XX_ICPU_CTRL_BOOT_EN);
 464         if (icpu_si_boot_en && icpu_pi_en) {
 465                 dev_err(vsc->dev,
 466                         "iCPU enabled boots from SI, has external memory\n");
 467                 dev_err(vsc->dev, "no idea how to deal with this\n");
 468                 return -ENODEV;
 469         }
 470         if (icpu_si_boot_en && !icpu_pi_en) {
 471                 dev_err(vsc->dev,
 472                         "iCPU enabled boots from PI/SI, no external memory\n");
 473                 return -EAGAIN;
 474         }
 475         if (!icpu_si_boot_en && icpu_pi_en) {
 476                 dev_err(vsc->dev,
 477                         "iCPU enabled, boots from PI external memory\n");
 478                 dev_err(vsc->dev, "no idea how to deal with this\n");
 479                 return -ENODEV;
 480         }
 481         /* !icpu_si_boot_en && !cpu_pi_en */
 482         dev_info(vsc->dev, "iCPU disabled, no external memory\n");
 483
 484         return 0;
 485 }
 486
 487 static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum)
 488 {
 489         struct vsc73xx *vsc = ds->priv;
 490         u32 cmd;
 491         u32 val;
 492         int ret;
 493
 494         /* Setting bit 26 means "read" */
 495         cmd = BIT(26) | (phy << 21) | (regnum << 16);
 496         ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
 497         if (ret)
 498                 return ret;
 499         msleep(2);
 500         ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, 0, 2, &val);
 501         if (ret)
 502                 return ret;
 503         if (val & BIT(16)) {
 504                 dev_err(vsc->dev, "reading reg %02x from phy%d failed\n",
 505                         regnum, phy);
 506                 return -EIO;
 507         }
 508         val &= 0xFFFFU;
 509
 510         dev_dbg(vsc->dev, "read reg %02x from phy%d = %04x\n",
 511                 regnum, phy, val);
 512
 513         return val;
 514 }
 515
 516 static int vsc73xx_phy_write(struct dsa_switch *ds, int phy, int regnum,
 517                              u16 val)
 518 {
 519         struct vsc73xx *vsc = ds->priv;
 520         u32 cmd;
 521         int ret;
 522
 523         /* It was found through tedious experiments that this router
 524          * chip really hates to have it's PHYs reset. They
 525          * never recover if that happens: autonegotiation stops
 526          * working after a reset. Just filter out this command.
 527          * (Resetting the whole chip is OK.)
 528          */
 529         if (regnum == 0 && (val & BIT(15))) {
 530                 dev_info(vsc->dev, "reset PHY - disallowed\n");
 531                 return 0;
 532         }
 533
 534         cmd = (phy << 21) | (regnum << 16);
 535         ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
 536         if (ret)
 537                 return ret;
 538
 539         dev_dbg(vsc->dev, "write %04x to reg %02x in phy%d\n",
 540                 val, regnum, phy);
 541         return 0;
 542 }
 543
 544 static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds,
 545                                                       int port,
 546                                                       enum dsa_tag_protocol mp)
 547 {
 548         /* The switch internally uses a 8 byte header with length,
 549          * source port, tag, LPA and priority. This is supposedly
 550          * only accessible when operating the switch using the internal
 551          * CPU or with an external CPU mapping the device in, but not
 552          * when operating the switch over SPI and putting frames in/out
 553          * on port 6 (the CPU port). So far we must assume that we
 554          * cannot access the tag. (See "Internal frame header" section
 555          * 3.9.1 in the manual.)
 556          */
 557         return DSA_TAG_PROTO_NONE;
 558 }
 559
 560 static int vsc73xx_setup(struct dsa_switch *ds)
 561 {
 562         struct vsc73xx *vsc = ds->priv;
 563         int i;
 564
 565         dev_info(vsc->dev, "set up the switch\n");
 566
 567         /* Issue RESET */
 568         vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
 569                       VSC73XX_GLORESET_MASTER_RESET);
 570         usleep_range(125, 200);
 571
 572         /* Initialize memory, initialize RAM bank 0..15 except 6 and 7
 573          * This sequence appears in the
 574          * VSC7385 SparX-G5 datasheet section 6.6.1
 575          * VSC7395 SparX-G5e datasheet section 6.6.1
 576          * "initialization sequence".
 577          * No explanation is given to the 0x1010400 magic number.
 578          */
 579         for (i = 0; i <= 15; i++) {
 580                 if (i != 6 && i != 7) {
 581                         vsc73xx_write(vsc, VSC73XX_BLOCK_MEMINIT,
 582                                       2,
 583                                       0, 0x1010400 + i);
 584                         mdelay(1);
 585                 }
 586         }
 587         mdelay(30);
 588
 589         /* Clear MAC table */
 590         vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
 591                       VSC73XX_MACACCESS,
 592                       VSC73XX_MACACCESS_CMD_CLEAR_TABLE);
 593
 594         /* Clear VLAN table */
 595         vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
 596                       VSC73XX_VLANACCESS,
 597                       VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE);
 598
 599         msleep(40);
 600
 601         /* Use 20KiB buffers on all ports on VSC7395
 602          * The VSC7385 has 16KiB buffers and that is the
 603          * default if we don't set this up explicitly.
 604          * Port "31" is "all ports".
 605          */
 606         if (IS_739X(vsc))
 607                 vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 0x1f,
 608                               VSC73XX_Q_MISC_CONF,
 609                               VSC73XX_Q_MISC_CONF_EXTENT_MEM);
 610
 611         /* Put all ports into reset until enabled */
 612         for (i = 0; i < 7; i++) {
 613                 if (i == 5)
 614                         continue;
 615                 vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 4,
 616                               VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
 617         }
 618
 619         /* MII delay, set both GTX and RX delay to 2 ns */
 620         vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
 621                       VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
 622                       VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
 623         /* Enable reception of frames on all ports */
 624         vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK,
 625                       0x5f);
 626         /* IP multicast flood mask (table 144) */
 627         vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
 628                       0xff);
 629
 630         mdelay(50);
 631
 632         /* Release reset from the internal PHYs */
 633         vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
 634                       VSC73XX_GLORESET_PHY_RESET);
 635
 636         udelay(4);
 637
 638         return 0;
 639 }
 640
 641 static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
 642 {
 643         u32 val;
 644
 645         /* MAC configure, first reset the port and then write defaults */
 646         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
 647                       port,
 648                       VSC73XX_MAC_CFG,
 649                       VSC73XX_MAC_CFG_RESET);
 650
 651         /* Take up the port in 1Gbit mode by default, this will be
 652          * augmented after auto-negotiation on the PHY-facing
 653          * ports.
 654          */
 655         if (port == CPU_PORT)
 656                 val = VSC73XX_MAC_CFG_1000M_F_RGMII;
 657         else
 658                 val = VSC73XX_MAC_CFG_1000M_F_PHY;
 659
 660         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
 661                       port,
 662                       VSC73XX_MAC_CFG,
 663                       val |
 664                       VSC73XX_MAC_CFG_TX_EN |
 665                       VSC73XX_MAC_CFG_RX_EN);
 666
 667         /* Max length, we can do up to 9.6 KiB, so allow that.
 668          * According to application not "VSC7398 Jumbo Frames" setting
 669          * up the MTU to 9.6 KB does not affect the performance on standard
 670          * frames, so just enable it. It is clear from the application note
 671          * that "9.6 kilobytes" == 9600 bytes.
 672          */
 673         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
 674                       port,
 675                       VSC73XX_MAXLEN, 9600);
 676
 677         /* Flow control for the CPU port:
 678          * Use a zero delay pause frame when pause condition is left
 679          * Obey pause control frames
 680          */
 681         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
 682                       port,
 683                       VSC73XX_FCCONF,
 684                       VSC73XX_FCCONF_ZERO_PAUSE_EN |
 685                       VSC73XX_FCCONF_FLOW_CTRL_OBEY);
 686
 687         /* Issue pause control frames on PHY facing ports.
 688          * Allow early initiation of MAC transmission if the amount
 689          * of egress data is below 512 bytes on CPU port.
 690          * FIXME: enable 20KiB buffers?
 691          */
 692         if (port == CPU_PORT)
 693                 val = VSC73XX_Q_MISC_CONF_EARLY_TX_512;
 694         else
 695                 val = VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE;
 696         val |= VSC73XX_Q_MISC_CONF_EXTENT_MEM;
 697         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
 698                       port,
 699                       VSC73XX_Q_MISC_CONF,
 700                       val);
 701
 702         /* Flow control MAC: a MAC address used in flow control frames */
 703         val = (vsc->addr[5] << 16) | (vsc->addr[4] << 8) | (vsc->addr[3]);
 704         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
 705                       port,
 706                       VSC73XX_FCMACHI,
 707                       val);
 708         val = (vsc->addr[2] << 16) | (vsc->addr[1] << 8) | (vsc->addr[0]);
 709         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
 710                       port,
 711                       VSC73XX_FCMACLO,
 712                       val);
 713
 714         /* Tell the categorizer to forward pause frames, not control
 715          * frame. Do not drop anything.
 716          */
 717         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
 718                       port,
 719                       VSC73XX_CAT_DROP,
 720                       VSC73XX_CAT_DROP_FWD_PAUSE_ENA);
 721
 722         /* Clear all counters */
 723         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
 724                       port, VSC73XX_C_RX0, 0);
 725 }
 726
 727 static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc,
 728                                        int port, struct phy_device *phydev,
 729                                        u32 initval)
 730 {
 731         u32 val = initval;
 732         u8 seed;
 733
 734         /* Reset this port FIXME: break out subroutine */
 735         val |= VSC73XX_MAC_CFG_RESET;
 736         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
 737
 738         /* Seed the port randomness with randomness */
 739         get_random_bytes(&seed, 1);
 740         val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
 741         val |= VSC73XX_MAC_CFG_SEED_LOAD;
 742         val |= VSC73XX_MAC_CFG_WEXC_DIS;
 743         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
 744
 745         /* Flow control for the PHY facing ports:
 746          * Use a zero delay pause frame when pause condition is left
 747          * Obey pause control frames
 748          * When generating pause frames, use 0xff as pause value
 749          */
 750         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
 751                       VSC73XX_FCCONF_ZERO_PAUSE_EN |
 752                       VSC73XX_FCCONF_FLOW_CTRL_OBEY |
 753                       0xff);
 754
 755         /* Disallow backward dropping of frames from this port */
 756         vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
 757                             VSC73XX_SBACKWDROP, BIT(port), 0);
 758
 759         /* Enable TX, RX, deassert reset, stop loading seed */
 760         vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
 761                             VSC73XX_MAC_CFG,
 762                             VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD |
 763                             VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN,
 764                             VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
 765 }
 766
 767 static void vsc73xx_adjust_link(struct dsa_switch *ds, int port,
 768                                 struct phy_device *phydev)
 769 {
 770         struct vsc73xx *vsc = ds->priv;
 771         u32 val;
 772
 773         /* Special handling of the CPU-facing port */
 774         if (port == CPU_PORT) {
 775                 /* Other ports are already initialized but not this one */
 776                 vsc73xx_init_port(vsc, CPU_PORT);
 777                 /* Select the external port for this interface (EXT_PORT)
 778                  * Enable the GMII GTX external clock
 779                  * Use double data rate (DDR mode)
 780                  */
 781                 vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
 782                               CPU_PORT,
 783                               VSC73XX_ADVPORTM,
 784                               VSC73XX_ADVPORTM_EXT_PORT |
 785                               VSC73XX_ADVPORTM_ENA_GTX |
 786                               VSC73XX_ADVPORTM_DDR_MODE);
 787         }
 788
 789         /* This is the MAC confiuration that always need to happen
 790          * after a PHY or the CPU port comes up or down.
 791          */
 792         if (!phydev->link) {
 793                 int maxloop = 10;
 794
 795                 dev_dbg(vsc->dev, "port %d: went down\n",
 796                         port);
 797
 798                 /* Disable RX on this port */
 799                 vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
 800                                     VSC73XX_MAC_CFG,
 801                                     VSC73XX_MAC_CFG_RX_EN, 0);
 802
 803                 /* Discard packets */
 804                 vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
 805                                     VSC73XX_ARBDISC, BIT(port), BIT(port));
 806
 807                 /* Wait until queue is empty */
 808                 vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
 809                              VSC73XX_ARBEMPTY, &val);
 810                 while (!(val & BIT(port))) {
 811                         msleep(1);
 812                         vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
 813                                      VSC73XX_ARBEMPTY, &val);
 814                         if (--maxloop == 0) {
 815                                 dev_err(vsc->dev,
 816                                         "timeout waiting for block arbiter\n");
 817                                 /* Continue anyway */
 818                                 break;
 819                         }
 820                 }
 821
 822                 /* Put this port into reset */
 823                 vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG,
 824                               VSC73XX_MAC_CFG_RESET);
 825
 826                 /* Accept packets again */
 827                 vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
 828                                     VSC73XX_ARBDISC, BIT(port), 0);
 829
 830                 /* Allow backward dropping of frames from this port */
 831                 vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
 832                                     VSC73XX_SBACKWDROP, BIT(port), BIT(port));
 833
 834                 /* Receive mask (disable forwarding) */
 835                 vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
 836                                     VSC73XX_RECVMASK, BIT(port), 0);
 837
 838                 return;
 839         }
 840
 841         /* Figure out what speed was negotiated */
 842         if (phydev->speed == SPEED_1000) {
 843                 dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n",
 844                         port);
 845
 846                 /* Set up default for internal port or external RGMII */
 847                 if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
 848                         val = VSC73XX_MAC_CFG_1000M_F_RGMII;
 849                 else
 850                         val = VSC73XX_MAC_CFG_1000M_F_PHY;
 851                 vsc73xx_adjust_enable_port(vsc, port, phydev, val);
 852         } else if (phydev->speed == SPEED_100) {
 853                 if (phydev->duplex == DUPLEX_FULL) {
 854                         val = VSC73XX_MAC_CFG_100_10M_F_PHY;
 855                         dev_dbg(vsc->dev,
 856                                 "port %d: 100 Mbit full duplex mode\n",
 857                                 port);
 858                 } else {
 859                         val = VSC73XX_MAC_CFG_100_10M_H_PHY;
 860                         dev_dbg(vsc->dev,
 861                                 "port %d: 100 Mbit half duplex mode\n",
 862                                 port);
 863                 }
 864                 vsc73xx_adjust_enable_port(vsc, port, phydev, val);
 865         } else if (phydev->speed == SPEED_10) {
 866                 if (phydev->duplex == DUPLEX_FULL) {
 867                         val = VSC73XX_MAC_CFG_100_10M_F_PHY;
 868                         dev_dbg(vsc->dev,
 869                                 "port %d: 10 Mbit full duplex mode\n",
 870                                 port);
 871                 } else {
 872                         val = VSC73XX_MAC_CFG_100_10M_H_PHY;
 873                         dev_dbg(vsc->dev,
 874                                 "port %d: 10 Mbit half duplex mode\n",
 875                                 port);
 876                 }
 877                 vsc73xx_adjust_enable_port(vsc, port, phydev, val);
 878         } else {
 879                 dev_err(vsc->dev,
 880                         "could not adjust link: unknown speed\n");
 881         }
 882
 883         /* Enable port (forwarding) in the receieve mask */
 884         vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
 885                             VSC73XX_RECVMASK, BIT(port), BIT(port));
 886 }
 887
 888 static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
 889                                struct phy_device *phy)
 890 {
 891         struct vsc73xx *vsc = ds->priv;
 892
 893         dev_info(vsc->dev, "enable port %d\n", port);
 894         vsc73xx_init_port(vsc, port);
 895
 896         return 0;
 897 }
 898
 899 static void vsc73xx_port_disable(struct dsa_switch *ds, int port)
 900 {
 901         struct vsc73xx *vsc = ds->priv;
 902
 903         /* Just put the port into reset */
 904         vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
 905                       VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
 906 }
 907
 908 static const struct vsc73xx_counter *
 909 vsc73xx_find_counter(struct vsc73xx *vsc,
 910                      u8 counter,
 911                      bool tx)
 912 {
 913         const struct vsc73xx_counter *cnts;
 914         int num_cnts;
 915         int i;
 916
 917         if (tx) {
 918                 cnts = vsc73xx_tx_counters;
 919                 num_cnts = ARRAY_SIZE(vsc73xx_tx_counters);
 920         } else {
 921                 cnts = vsc73xx_rx_counters;
 922                 num_cnts = ARRAY_SIZE(vsc73xx_rx_counters);
 923         }
 924
 925         for (i = 0; i < num_cnts; i++) {
 926                 const struct vsc73xx_counter *cnt;
 927
 928                 cnt = &cnts[i];
 929                 if (cnt->counter == counter)
 930                         return cnt;
 931         }
 932
 933         return NULL;
 934 }
 935
 936 static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset,
 937                                 uint8_t *data)
 938 {
 939         const struct vsc73xx_counter *cnt;
 940         struct vsc73xx *vsc = ds->priv;
 941         u8 indices[6];
 942         int i, j;
 943         u32 val;
 944         int ret;
 945
 946         if (stringset != ETH_SS_STATS)
 947                 return;
 948
 949         ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
 950                            VSC73XX_C_CFG, &val);
 951         if (ret)
 952                 return;
 953
 954         indices[0] = (val & 0x1f); /* RX counter 0 */
 955         indices[1] = ((val >> 5) & 0x1f); /* RX counter 1 */
 956         indices[2] = ((val >> 10) & 0x1f); /* RX counter 2 */
 957         indices[3] = ((val >> 16) & 0x1f); /* TX counter 0 */
 958         indices[4] = ((val >> 21) & 0x1f); /* TX counter 1 */
 959         indices[5] = ((val >> 26) & 0x1f); /* TX counter 2 */
 960
 961         /* The first counters is the RX octets */
 962         j = 0;
 963         strncpy(data + j * ETH_GSTRING_LEN,
 964                 "RxEtherStatsOctets", ETH_GSTRING_LEN);
 965         j++;
 966
 967         /* Each port supports recording 3 RX counters and 3 TX counters,
 968          * figure out what counters we use in this set-up and return the
 969          * names of them. The hardware default counters will be number of
 970          * packets on RX/TX, combined broadcast+multicast packets RX/TX and
 971          * total error packets RX/TX.
 972          */
 973         for (i = 0; i < 3; i++) {
 974                 cnt = vsc73xx_find_counter(vsc, indices[i], false);
 975                 if (cnt)
 976                         strncpy(data + j * ETH_GSTRING_LEN,
 977                                 cnt->name, ETH_GSTRING_LEN);
 978                 j++;
 979         }
 980
 981         /* TX stats begins with the number of TX octets */
 982         strncpy(data + j * ETH_GSTRING_LEN,
 983                 "TxEtherStatsOctets", ETH_GSTRING_LEN);
 984         j++;
 985
 986         for (i = 3; i < 6; i++) {
 987                 cnt = vsc73xx_find_counter(vsc, indices[i], true);
 988                 if (cnt)
 989                         strncpy(data + j * ETH_GSTRING_LEN,
 990                                 cnt->name, ETH_GSTRING_LEN);
 991                 j++;
 992         }
 993 }
 994
 995 static int vsc73xx_get_sset_count(struct dsa_switch *ds, int port, int sset)
 996 {
 997         /* We only support SS_STATS */
 998         if (sset != ETH_SS_STATS)
 999                 return 0;
1000         /* RX and TX packets, then 3 RX counters, 3 TX counters */
1001         return 8;
1002 }
1003
1004 static void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port,
1005                                       uint64_t *data)
1006 {
1007         struct vsc73xx *vsc = ds->priv;
1008         u8 regs[] = {
1009                 VSC73XX_RXOCT,
1010                 VSC73XX_C_RX0,
1011                 VSC73XX_C_RX1,
1012                 VSC73XX_C_RX2,
1013                 VSC73XX_TXOCT,
1014                 VSC73XX_C_TX0,
1015                 VSC73XX_C_TX1,
1016                 VSC73XX_C_TX2,
1017         };
1018         u32 val;
1019         int ret;
1020         int i;
1021
1022         for (i = 0; i < ARRAY_SIZE(regs); i++) {
1023                 ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
1024                                    regs[i], &val);
1025                 if (ret) {
1026                         dev_err(vsc->dev, "error reading counter %d\n", i);
1027                         return;
1028                 }
1029                 data[i] = val;
1030         }
1031 }
1032
1033 static const struct dsa_switch_ops vsc73xx_ds_ops = {
1034         .get_tag_protocol = vsc73xx_get_tag_protocol,
1035         .setup = vsc73xx_setup,
1036         .phy_read = vsc73xx_phy_read,
1037         .phy_write = vsc73xx_phy_write,
1038         .adjust_link = vsc73xx_adjust_link,
1039         .get_strings = vsc73xx_get_strings,
1040         .get_ethtool_stats = vsc73xx_get_ethtool_stats,
1041         .get_sset_count = vsc73xx_get_sset_count,
1042         .port_enable = vsc73xx_port_enable,
1043         .port_disable = vsc73xx_port_disable,
1044 };
1045
1046 static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
1047 {
1048         struct vsc73xx *vsc = gpiochip_get_data(chip);
1049         u32 val;
1050         int ret;
1051
1052         ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1053                            VSC73XX_GPIO, &val);
1054         if (ret)
1055                 return ret;
1056
1057         return !!(val & BIT(offset));
1058 }
1059
1060 static void vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset,
1061                              int val)
1062 {
1063         struct vsc73xx *vsc = gpiochip_get_data(chip);
1064         u32 tmp = val ? BIT(offset) : 0;
1065
1066         vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1067                             VSC73XX_GPIO, BIT(offset), tmp);
1068 }
1069
1070 static int vsc73xx_gpio_direction_output(struct gpio_chip *chip,
1071                                          unsigned int offset, int val)
1072 {
1073         struct vsc73xx *vsc = gpiochip_get_data(chip);
1074         u32 tmp = val ? BIT(offset) : 0;
1075
1076         return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1077                                    VSC73XX_GPIO, BIT(offset + 4) | BIT(offset),
1078                                    BIT(offset + 4) | tmp);
1079 }
1080
1081 static int vsc73xx_gpio_direction_input(struct gpio_chip *chip,
1082                                         unsigned int offset)
1083 {
1084         struct vsc73xx *vsc = gpiochip_get_data(chip);
1085
1086         return  vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1087                                     VSC73XX_GPIO, BIT(offset + 4),
1088                                     0);
1089 }
1090
1091 static int vsc73xx_gpio_get_direction(struct gpio_chip *chip,
1092                                       unsigned int offset)
1093 {
1094         struct vsc73xx *vsc = gpiochip_get_data(chip);
1095         u32 val;
1096         int ret;
1097
1098         ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
1099                            VSC73XX_GPIO, &val);
1100         if (ret)
1101                 return ret;
1102
1103         return !(val & BIT(offset + 4));
1104 }
1105
1106 static int vsc73xx_gpio_probe(struct vsc73xx *vsc)
1107 {
1108         int ret;
1109
1110         vsc->gc.label = devm_kasprintf(vsc->dev, GFP_KERNEL, "VSC%04x",
1111                                        vsc->chipid);
1112         vsc->gc.ngpio = 4;
1113         vsc->gc.owner = THIS_MODULE;
1114         vsc->gc.parent = vsc->dev;
1115 #if IS_ENABLED(CONFIG_OF_GPIO)
1116         vsc->gc.of_node = vsc->dev->of_node;
1117 #endif
1118         vsc->gc.base = -1;
1119         vsc->gc.get = vsc73xx_gpio_get;
1120         vsc->gc.set = vsc73xx_gpio_set;
1121         vsc->gc.direction_input = vsc73xx_gpio_direction_input;
1122         vsc->gc.direction_output = vsc73xx_gpio_direction_output;
1123         vsc->gc.get_direction = vsc73xx_gpio_get_direction;
1124         vsc->gc.can_sleep = true;
1125         ret = devm_gpiochip_add_data(vsc->dev, &vsc->gc, vsc);
1126         if (ret) {
1127                 dev_err(vsc->dev, "unable to register GPIO chip\n");
1128                 return ret;
1129         }
1130         return 0;
1131 }
1132
1133 int vsc73xx_probe(struct vsc73xx *vsc)
1134 {
1135         struct device *dev = vsc->dev;
1136         int ret;
1137
1138         /* Release reset, if any */
1139         vsc->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
1140         if (IS_ERR(vsc->reset)) {
1141                 dev_err(dev, "failed to get RESET GPIO\n");
1142                 return PTR_ERR(vsc->reset);
1143         }
1144         if (vsc->reset)
1145                 /* Wait 20ms according to datasheet table 245 */
1146                 msleep(20);
1147
1148         ret = vsc73xx_detect(vsc);
1149         if (ret == -EAGAIN) {
1150                 dev_err(vsc->dev,
1151                         "Chip seems to be out of control. Assert reset and try again.\n");
1152                 gpiod_set_value_cansleep(vsc->reset, 1);
1153                 /* Reset pulse should be 20ns minimum, according to datasheet
1154                  * table 245, so 10us should be fine
1155                  */
1156                 usleep_range(10, 100);
1157                 gpiod_set_value_cansleep(vsc->reset, 0);
1158                 /* Wait 20ms according to datasheet table 245 */
1159                 msleep(20);
1160                 ret = vsc73xx_detect(vsc);
1161         }
1162         if (ret) {
1163                 dev_err(dev, "no chip found (%d)\n", ret);
1164                 return -ENODEV;
1165         }
1166
1167         eth_random_addr(vsc->addr);
1168         dev_info(vsc->dev,
1169                  "MAC for control frames: %02X:%02X:%02X:%02X:%02X:%02X\n",
1170                  vsc->addr[0], vsc->addr[1], vsc->addr[2],
1171                  vsc->addr[3], vsc->addr[4], vsc->addr[5]);
1172
1173         /* The VSC7395 switch chips have 5+1 ports which means 5
1174          * ordinary ports and a sixth CPU port facing the processor
1175          * with an RGMII interface. These ports are numbered 0..4
1176          * and 6, so they leave a "hole" in the port map for port 5,
1177          * which is invalid.
1178          *
1179          * The VSC7398 has 8 ports, port 7 is again the CPU port.
1180          *
1181          * We allocate 8 ports and avoid access to the nonexistant
1182          * ports.
1183          */
1184         vsc->ds = devm_kzalloc(dev, sizeof(*vsc->ds), GFP_KERNEL);
1185         if (!vsc->ds)
1186                 return -ENOMEM;
1187
1188         vsc->ds->dev = dev;
1189         vsc->ds->num_ports = 8;
1190         vsc->ds->priv = vsc;
1191
1192         vsc->ds->ops = &vsc73xx_ds_ops;
1193         ret = dsa_register_switch(vsc->ds);
1194         if (ret) {
1195                 dev_err(dev, "unable to register switch (%d)\n", ret);
1196                 return ret;
1197         }
1198
1199         ret = vsc73xx_gpio_probe(vsc);
1200         if (ret) {
1201                 dsa_unregister_switch(vsc->ds);
1202                 return ret;
1203         }
1204
1205         return 0;
1206 }
1207 EXPORT_SYMBOL(vsc73xx_probe);
1208
1209 int vsc73xx_remove(struct vsc73xx *vsc)
1210 {
1211         dsa_unregister_switch(vsc->ds);
1212         gpiod_set_value(vsc->reset, 1);
1213
1214         return 0;
1215 }
1216 EXPORT_SYMBOL(vsc73xx_remove);
1217
1218 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
1219 MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver");
1220 MODULE_LICENSE("GPL v2");