1 source "drivers/net/phy/Kconfig"
2 source "drivers/net/pfe_eth/Kconfig"
3 source "drivers/net/fsl-mc/Kconfig"
6 bool "Enable Driver Model for Ethernet drivers"
9 Enable driver model for Ethernet.
11 The eth_*() interface will be implemented by the UCLASS_ETH class
12 This is currently implemented in net/eth-uclass.c
13 Look in include/net.h for details.
16 bool "Enable Driver Model for MDIO devices"
17 depends on DM_ETH && PHYLIB
19 Enable driver model for MDIO devices
21 Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
22 stand-alone devices. Useful in particular for systems that support
23 DM_ETH and have a stand-alone MDIO hardware block shared by multiple
25 This is currently implemented in net/mdio-uclass.c
26 Look in include/miiphy.h for details.
29 bool "Enable Driver Model for MDIO MUX devices"
32 Enable driver model for MDIO MUX devices
34 Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
35 systems that support DM_MDIO and integrate one or multiple muxes on
37 This is currently implemented in net/mdio-mux-uclass.c
38 Look in include/miiphy.h for details.
41 bool "Enable Driver Model for DSA switches"
42 depends on DM_ETH && DM_MDIO
45 Enable driver model for DSA switches
47 Adds UCLASS_DSA class supporting switches that follow the Distributed
48 Switch Architecture (DSA). These switches rely on the presence of a
49 management switch port connected to an Ethernet controller capable of
50 receiving frames from the switch. This host Ethernet controller is
51 called the "master" Ethernet interface in DSA terminology.
52 This is currently implemented in net/dsa-uclass.c, refer to
53 include/net/dsa.h for API details.
56 depends on DM_MDIO && SANDBOX
58 bool "Sandbox: Mocked MDIO driver"
60 This driver implements dummy read/write/reset MDIO functions mimicking
61 a bus with a single PHY.
63 This driver is used in for testing in test/dm/mdio.c
65 config MDIO_MUX_SANDBOX
66 depends on DM_MDIO_MUX && MDIO_SANDBOX
68 bool "Sandbox: Mocked MDIO-MUX driver"
70 This driver implements dummy select/deselect ops mimicking a MUX on
71 the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
73 This driver is used for testing in test/dm/mdio.c
76 bool "Enable Driver Model for Ethernet Generic PHY drivers"
79 Enable driver model for Ethernet Generic PHY .
82 depends on DM_DSA && SANDBOX
84 bool "Sandbox: Mocked DSA driver"
86 This driver implements a dummy DSA switch connected to a dummy sandbox
87 Ethernet device used as DSA master, to test DSA class code, including
88 exported DSA API and datapath processing of Ethernet traffic.
91 bool "Network device support"
95 You must select Y to enable any network device support
96 Generally if you have any networking support this is a given
103 bool "Enable GbE PHY status parsing and configuration"
105 Enables support for parsing the status output and for
106 configuring GbE PHYs (affects the inner workings of some
107 commands and miiphyutil.c).
110 bool "Atheros AG7xxx Ethernet MAC support"
111 depends on DM_ETH && ARCH_ATH79
114 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
115 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
119 bool "Altera Triple-Speed Ethernet MAC support"
123 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
124 Please find details on the "Triple-Speed Ethernet MegaCore Function
125 Resource Center" of Altera.
128 bool "Broadcom SF2 (Starfighter2) Ethernet support"
131 This is an abstract framework which provides a generic interface
132 to MAC and DMA management for multiple Broadcom SoCs such as
133 Cygnus, NSP and bcm28155_ap platforms.
135 config BCM_SF2_ETH_DEFAULT_PORT
136 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
137 depends on BCM_SF2_ETH
140 Default port number for the Starfighter2 ethernet driver.
142 config BCM_SF2_ETH_GMAC
143 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
144 depends on BCM_SF2_ETH
146 This flag enables the ethernet support for Broadcom platforms with
147 GMAC such as Cygnus. This driver is based on the framework provided
148 by the BCM_SF2_ETH driver.
149 Say Y to any bcmcygnus based platforms.
152 bool "BCM6348 EMAC support"
153 depends on DM_ETH && ARCH_BMIPS
159 This driver supports the BCM6348 Ethernet MAC.
162 bool "BCM6368 EMAC support"
163 depends on DM_ETH && ARCH_BMIPS
167 This driver supports the BCM6368 Ethernet MAC.
170 bool "BCMGENET V5 support"
174 This driver supports the BCMGENET Ethernet MAC.
176 config CORTINA_NI_ENET
177 bool "Cortina-Access Ethernet driver"
178 depends on DM_ETH && CORTINA_PLATFORM
180 This driver supports the Cortina-Access Ethernet MAC for
181 all supported CAxxxx SoCs.
184 bool "Calxeda XGMAC support"
187 This driver supports the XGMAC in Calxeda Highbank and Midway
191 bool "Synopsys DWC Ethernet QOS device support"
195 This driver supports the Synopsys Designware Ethernet QOS (Quality
196 Of Service) IP block. The IP supports many options for bus type,
197 clocking/reset structure, and feature list.
199 config DWC_ETH_QOS_IMX
200 bool "Synopsys DWC Ethernet QOS device support for IMX"
201 depends on DWC_ETH_QOS
203 The Synopsys Designware Ethernet QOS IP block with the specific
204 configuration used in IMX soc.
206 config DWC_ETH_QOS_STM32
207 bool "Synopsys DWC Ethernet QOS device support for STM32"
208 depends on DWC_ETH_QOS
209 default y if ARCH_STM32MP
211 The Synopsys Designware Ethernet QOS IP block with the specific
212 configuration used in STM32MP soc.
214 config DWC_ETH_QOS_TEGRA186
215 bool "Synopsys DWC Ethernet QOS device support for TEGRA186"
216 depends on DWC_ETH_QOS
217 default y if TEGRA186
219 The Synopsys Designware Ethernet QOS IP block with specific
220 configuration used in NVIDIA's Tegra186 chip.
223 bool "Intel PRO/1000 Gigabit Ethernet support"
224 depends on (DM_ETH && DM_PCI) || !DM_ETH
226 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
227 adapters. For more information on how to identify your adapter, go
228 to the Adapter & Driver ID Guide at:
230 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
232 config E1000_SPI_GENERIC
233 bool "Allow access to the Intel 8257x SPI bus"
236 Allow generic access to the SPI bus on the Intel 8257x, for
237 example with the "sspi" command.
240 bool "Enable SPI bus utility code"
243 Utility code for direct access to the SPI bus on Intel 8257x.
244 This does not do anything useful unless you set at least one
245 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
248 bool "Enable the e1000 command"
251 This enables the 'e1000' management command for E1000 devices. When
252 used on devices with SPI support you can reprogram the EEPROM from
256 bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
258 This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
259 ethernet family of adapters.
262 depends on DM_ETH && SANDBOX
264 bool "Sandbox: Mocked Ethernet driver"
266 This driver simply responds with fake ARP replies and ping
267 replies that are used to verify network stack functionality
269 This driver is particularly useful in the test/dm/eth.c tests
271 config ETH_SANDBOX_RAW
272 depends on DM_ETH && SANDBOX
274 bool "Sandbox: Bridge to Linux Raw Sockets"
276 This driver is a bridge from the bottom of the network stack
277 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
278 network traffic to be tested from within sandbox. See
279 doc/arch/index.rst for more details.
281 config ETH_DESIGNWARE
282 bool "Synopsys Designware Ethernet MAC"
284 imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
286 This MAC is present in SoCs from various vendors. It supports
287 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
288 provide the PHY (physical media interface).
290 config ETH_DESIGNWARE_MESON8B
291 bool "Amlogic Meson8b and later glue driver for Synopsys Designware Ethernet MAC"
293 select ETH_DESIGNWARE
295 This provides glue layer to use Synopsys Designware Ethernet MAC
296 present on the Amlogic Meson8b, GX, AXG & G12A SoCs.
298 config ETH_DESIGNWARE_SOCFPGA
301 bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
302 depends on DM_ETH && ETH_DESIGNWARE
304 The Altera SoCFPGA requires additional configuration of the
305 Altera system manager to correctly interface with the PHY.
306 This code handles those SoC specifics.
308 config ETH_DESIGNWARE_S700
309 bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
310 depends on DM_ETH && ETH_DESIGNWARE
312 This provides glue layer to use Synopsys Designware Ethernet MAC
313 present on Actions S700 SoC.
316 bool "OpenCores 10/100 Mbps Ethernet MAC"
318 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
320 config FEC_MXC_SHARE_MDIO
321 bool "Share the MDIO bus for FEC controller"
324 config FEC_MXC_MDIO_BASE
325 hex "MDIO base address for the FEC controller"
326 depends on FEC_MXC_SHARE_MDIO
328 This specifies the MDIO registers base address. It is used when
329 two FEC controllers share MDIO bus.
332 bool "FEC Ethernet controller"
333 depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || VF610
335 This driver supports the 10/100 Fast Ethernet controller for
339 bool "Freescale FMan ethernet support"
340 depends on ARM || PPC
342 This driver support the Freescale FMan Ethernet controller
345 bool "Ftmac100 Ethernet Support"
347 This MAC is present in Andestech SoCs.
350 bool "Ftgmac100 Ethernet Support"
354 This driver supports the Faraday's FTGMAC100 Gigabit SoC
355 Ethernet controller that can be found on Aspeed SoCs (which
358 It is fully compliant with IEEE 802.3 specification for
359 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
360 Mbps Ethernet and includes Reduced Media Independent
361 Interface (RMII) and Reduced Gigabit Media Independent
362 Interface (RGMII) interfaces. It adopts an AHB bus interface
363 and integrates a link list DMA engine with direct M-Bus
364 accesses for transmitting and receiving packets. It has
365 independent TX/RX fifos, supports half and full duplex (1000
366 Mbps mode only supports full duplex), flow control for full
367 duplex and backpressure for half duplex.
369 The FTGMAC100 also implements IP, TCP, UDP checksum offloads
370 and supports IEEE 802.1Q VLAN tag insertion and removal. It
371 offers high-priority transmit queue for QoS and CoS
376 bool "ColdFire Ethernet Support"
380 This driver supports the network interface units in the
384 bool "ColdFire DMA Ethernet Support"
388 This driver supports the network interface units in the
392 bool "Microchip KS8851-MLL controller driver"
394 The Microchip KS8851 parallel bus external ethernet interface chip.
398 config KS8851_MLL_BASEADDR
399 hex "Microchip KS8851-MLL Base Address"
401 Define this to hold the physical address of the device (I/O space)
406 bool "Microchip KSZ9477 I2C controller driver"
407 depends on DM_DSA && DM_I2C
409 This driver implements a DSA switch driver for the KSZ9477 family
410 of GbE switches using the I2C interface.
413 bool "Marvell Orion5x/Kirkwood network interface support"
414 depends on ARCH_KIRKWOOD || ARCH_ORION5X
415 select PHYLIB if DM_ETH
417 This driver supports the network interface units in the
418 Marvell Orion5x and Kirkwood SoCs
421 bool "Marvell Armada XP/385/3700 network interface support"
422 depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
425 This driver supports the network interface units in the
426 Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
429 bool "Marvell Armada 375/7K/8K network interface support"
430 depends on ARMADA_375 || ARMADA_8K
435 This driver supports the network interface units in the
436 Marvell ARMADA 375, 7K and 8K SoCs.
439 bool "Cadence MACB/GEM Ethernet Interface"
443 The Cadence MACB ethernet interface is found on many Atmel
444 AT91 and SAMA5 parts. This driver also supports the Cadence
445 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
446 Say Y to include support for the MACB/GEM chip.
449 bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
452 The Cadence MACB ethernet interface was used on Zynq platform.
453 Say Y to enable support for the MACB/GEM in Zynq chip.
456 bool "MediaTek MT7620 Ethernet Interface"
457 depends on SOC_MT7620
463 The MediaTek MT7620 ethernet interface is used on MT7620 based
464 boards. It has a built-in switch with two configurable ports which
465 can connect to external PHY/MACs.
468 bool "MediaTek MT7628 Ethernet Interface"
469 depends on SOC_MT7628
472 The MediaTek MT7628 ethernet interface is used on MT7628 and
476 bool "OcteonTX Ethernet support"
477 depends on ARCH_OCTEONTX
480 You must select Y to enable network device support for
481 OcteonTX SoCs. If unsure, say n
484 bool "OcteonTX2 Ethernet support"
485 depends on ARCH_OCTEONTX2
486 select OCTEONTX2_CGX_INTF
488 You must select Y to enable network device support for
489 OcteonTX2 SoCs. If unsure, say n
492 bool "OcteonTX SMI Device support"
493 depends on ARCH_OCTEONTX || ARCH_OCTEONTX2
495 You must select Y to enable SMI controller support for
496 OcteonTX or OcteonTX2 SoCs. If unsure, say n
498 config OCTEONTX2_CGX_INTF
499 bool "OcteonTX2 CGX ATF interface support"
500 depends on ARCH_OCTEONTX2
501 default y if ARCH_OCTEONTX2
503 You must select Y to enable CGX ATF interface support for
504 OcteonTX2 SoCs. If unsure, say n
507 bool "Intel Platform Controller Hub EG20T GMAC driver"
508 depends on DM_ETH && DM_PCI
511 This MAC is present in Intel Platform Controller Hub EG20T. It
512 supports 10/100/1000 Mbps operation.
517 Enable the support of the Reduced Gigabit Media-Independent
523 Enable support of the Media-Independent Interface (MII)
526 bool "AMD PCnet series Ethernet controller driver"
528 This driver supports AMD PCnet series fast ethernet family of
529 PCI chipsets/adapters.
531 source "drivers/net/qe/Kconfig"
534 bool "Realtek 8139 series Ethernet controller driver"
536 This driver supports Realtek 8139 series fast ethernet family of
537 PCI chipsets/adapters.
540 bool "Realtek 8169 series Ethernet controller driver"
542 This driver supports Realtek 8169 series gigabit ethernet family of
543 PCI/PCIe chipsets/adapters.
546 bool "SMSC LAN911x and LAN921x controller driver"
552 hex "SMC911X Base Address"
554 Define this to hold the physical address
555 of the device (I/O space)
558 config SMC911X_32_BIT
559 bool "Enable SMC911X 32-bit interface"
562 Define this if data bus is 32 bits. If your processor use a
563 narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit
564 words, leave this to "n".
569 bool "Enable Allwinner GMAC Ethernet support"
571 Enable the support for Sun7i GMAC Ethernet controller
573 config SUN7I_GMAC_FORCE_TXERR
574 bool "Force PA17 as gmac function"
575 depends on SUN7I_GMAC
577 Some ethernet phys needs TXERR control. Since the GMAC
578 doesn't have such signal, setting PA17 as GMAC function
579 makes the pin output low, which enables data transmission.
582 bool "Allwinner Sun4i Ethernet MAC support"
586 This driver supports the Allwinner based SUN4I Ethernet MAC.
589 bool "Allwinner Sun8i Ethernet MAC support"
594 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
595 It can be found in H3/A64/A83T based SoCs and compatible with both
596 External and Internal PHYs.
599 bool "Renesas SH Ethernet MAC"
602 This driver supports the Ethernet for Renesas SH and ARM SoCs.
604 source "drivers/net/ti/Kconfig"
607 bool "DEC Tulip DC2114x Ethernet support"
608 depends on (DM_ETH && DM_PCI) || !DM_ETH
610 This driver supports DEC DC2114x Fast ethernet chips.
612 config XILINX_AXIEMAC
616 bool "Xilinx AXI Ethernet"
618 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
620 config XILINX_EMACLITE
624 bool "Xilinx Ethernetlite"
626 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
631 bool "Xilinx Ethernet GEM"
633 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
636 bool "Microchip PIC32 Ethernet Support"
637 depends on DM_ETH && MACH_PIC32
640 This driver implements 10/100 Mbps Ethernet and MAC layer for
641 Microchip PIC32 microcontrollers.
644 bool "Rockchip Synopsys Designware Ethernet MAC"
645 depends on DM_ETH && ETH_DESIGNWARE
647 This driver provides Rockchip SoCs network support based on the
648 Synopsys Designware driver.
651 bool "Renesas Ethernet AVB MAC"
652 depends on DM_ETH && RCAR_GEN3
655 This driver implements support for the Ethernet AVB block in
656 Renesas M3 and H3 SoCs.
659 bool "Fast Ethernet Controller on MPC8XX"
663 This driver implements support for the Fast Ethernet Controller
667 bool "Socionext AVE Ethernet support"
668 depends on DM_ETH && ARCH_UNIPHIER
673 This driver implements support for the Socionext AVE Ethernet
674 controller, as found on the Socionext UniPhier family.
677 bool "Socionext NETSEC Ethernet support"
678 depends on DM_ETH && SYNQUACER_SPI
681 This driver implements support for the Socionext SynQuacer NETSEC
682 ethernet controller, as found on the Socionext SynQuacer family.
684 source "drivers/net/mscc_eswitch/Kconfig"
688 depends on MPC8XX_FEC
693 depends on ETHER_ON_FEC1
696 Define to the hardcoded PHY address which corresponds
697 to the given FEC; i. e.
698 #define CONFIG_FEC1_PHY 4
699 means that the PHY with address 4 is connected to FEC1
701 When set to -1, means to probe for first available.
705 depends on ETHER_ON_FEC1
708 The PHY does not have a RXERR line (RMII only).
709 (so program the FEC to ignore it).
713 depends on MPC8XX_FEC && MPC885
718 depends on ETHER_ON_FEC2
721 Define to the hardcoded PHY address which corresponds
722 to the given FEC; i. e.
723 #define CONFIG_FEC1_PHY 4
724 means that the PHY with address 4 is connected to FEC1
726 When set to -1, means to probe for first available.
728 config FEC2_PHY_NORXERR
730 depends on ETHER_ON_FEC2
733 The PHY does not have a RXERR line (RMII only).
734 (so program the FEC to ignore it).
736 config SYS_DPAA_QBMAN
737 bool "Device tree fixup for QBMan on freescale SOCs"
738 depends on (ARM || PPC) && !SPL_BUILD
739 default y if ARCH_B4860 || \
754 QBman fixups to allow deep sleep in DPAA 1 SOCs
758 bool "Enable Three-Speed Ethernet Controller"
760 This driver implements support for the (Enhanced) Three-Speed
761 Ethernet Controller found on Freescale SoCs.
764 bool "MediaTek Ethernet GMAC Driver"
770 This Driver support MediaTek Ethernet GMAC
771 Say Y to enable support for the MediaTek Ethernet GMAC.
773 config HIGMACV300_ETH
774 bool "HiSilicon Gigabit Ethernet Controller"
779 This driver supports HIGMACV300 Ethernet controller found on
783 bool "NXP ENETC Ethernet controller"
784 depends on DM_PCI && DM_ETH && DM_MDIO
786 This driver supports the NXP ENETC Ethernet controller found on some
789 config MDIO_MUX_I2CREG
790 bool "MDIO MUX accessed as a register over I2C"
791 depends on DM_MDIO_MUX && DM_I2C
793 This driver is used for MDIO muxes driven by writing to a register of
794 an I2C chip. The board it was developed for uses a mux controlled by
795 on-board FPGA which in turn is accessed as a chip over I2C.
798 bool "Qualcomm IPQ4019 MDIO interface support"
801 This driver supports the MDIO interface found in Qualcomm
802 IPQ40xx series Soc-s.
805 bool "Marvell MDIO interface support"
808 This driver supports the MDIO interface found in the network
809 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
810 Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
812 This driver is used by the MVPP2 and MVNETA drivers.
815 bool "NXP Layerscape MDIO interface support"
818 This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
819 on the mEMAC (which supports both Clauses 22 and 45).
821 config MDIO_MUX_MMIOREG
822 bool "MDIO MUX accessed as a MMIO register access"
823 depends on DM_MDIO_MUX
825 This driver is used for MDIO muxes driven by writing to a register in
826 the MMIO physical memory.
828 config MDIO_MUX_MESON_G12A
829 bool "MDIO MUX for Amlogic Meson G12A SoCs"
830 depends on DM_MDIO_MUX
832 This driver is used for the MDIO mux found on the Amlogic G12A & compatible