1 source "drivers/net/phy/Kconfig"
4 bool "Enable Driver Model for Ethernet drivers"
7 Enable driver model for Ethernet.
9 The eth_*() interface will be implemented by the UC_ETH class
10 This is currently implemented in net/eth.c
11 Look in include/net.h for details.
14 bool "Network device support"
18 You must select Y to enable any network device support
19 Generally if you have any networking support this is a given
26 bool "Enable GbE PHY status parsing and configuration"
28 Enables support for parsing the status output and for
29 configuring GbE PHYs (affects the inner workings of some
30 commands and miiphyutil.c).
33 bool "Atheros AG7xxx Ethernet MAC support"
34 depends on DM_ETH && ARCH_ATH79
37 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
38 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
42 bool "Altera Triple-Speed Ethernet MAC support"
46 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
47 Please find details on the "Triple-Speed Ethernet MegaCore Function
48 Resource Center" of Altera.
51 bool "Broadcom SF2 (Starfighter2) Ethernet support"
54 This is an abstract framework which provides a generic interface
55 to MAC and DMA management for multiple Broadcom SoCs such as
56 Cygnus, NSP and bcm28155_ap platforms.
58 config BCM_SF2_ETH_DEFAULT_PORT
59 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
60 depends on BCM_SF2_ETH
63 Default port number for the Starfighter2 ethernet driver.
65 config BCM_SF2_ETH_GMAC
66 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
67 depends on BCM_SF2_ETH
69 This flag enables the ethernet support for Broadcom platforms with
70 GMAC such as Cygnus. This driver is based on the framework provided
71 by the BCM_SF2_ETH driver.
72 Say Y to any bcmcygnus based platforms.
75 bool "Synopsys DWC Ethernet QOS device support"
79 This driver supports the Synopsys Designware Ethernet QOS (Quality
80 Of Service) IP block. The IP supports many options for bus type,
81 clocking/reset structure, and feature list. This driver currently
82 supports the specific configuration used in NVIDIA's Tegra186 chip,
83 but should be extensible to other combinations quite easily.
86 bool "Intel PRO/1000 Gigabit Ethernet support"
88 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
89 adapters. For more information on how to identify your adapter, go
90 to the Adapter & Driver ID Guide at:
92 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
94 config E1000_SPI_GENERIC
95 bool "Allow access to the Intel 8257x SPI bus"
98 Allow generic access to the SPI bus on the Intel 8257x, for
99 example with the "sspi" command.
102 bool "Enable SPI bus utility code"
105 Utility code for direct access to the SPI bus on Intel 8257x.
106 This does not do anything useful unless you set at least one
107 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
110 bool "Enable the e1000 command"
113 This enables the 'e1000' management command for E1000 devices. When
114 used on devices with SPI support you can reprogram the EEPROM from
118 depends on DM_ETH && SANDBOX
120 bool "Sandbox: Mocked Ethernet driver"
122 This driver simply responds with fake ARP replies and ping
123 replies that are used to verify network stack functionality
125 This driver is particularly useful in the test/dm/eth.c tests
127 config ETH_SANDBOX_RAW
128 depends on DM_ETH && SANDBOX
130 bool "Sandbox: Bridge to Linux Raw Sockets"
132 This driver is a bridge from the bottom of the network stack
133 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
134 network traffic to be tested from within sandbox. See
135 board/sandbox/README.sandbox for more details.
137 config ETH_DESIGNWARE
138 bool "Synopsys Designware Ethernet MAC"
141 This MAC is present in SoCs from various vendors. It supports
142 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
143 provide the PHY (physical media interface).
146 bool "OpenCores 10/100 Mbps Ethernet MAC"
148 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
151 bool "FEC Ethernet controller"
152 depends on MX5 || MX6
154 This driver supports the 10/100 Fast Ethernet controller for
158 bool "Ftmac100 Ethernet Support"
160 This MAC is present in Andestech SoCs.
163 bool "Marvell Armada 375/7K/8K network interface support"
164 depends on ARMADA_375 || ARMADA_8K
167 This driver supports the network interface units in the
168 Marvell ARMADA 375, 7K and 8K SoCs.
171 bool "Cadence MACB/GEM Ethernet Interface"
175 The Cadence MACB ethernet interface is found on many Atmel
176 AT91 and SAMA5 parts. This driver also supports the Cadence
177 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
178 Say Y to include support for the MACB/GEM chip.
181 bool "Intel Platform Controller Hub EG20T GMAC driver"
182 depends on DM_ETH && DM_PCI
185 This MAC is present in Intel Platform Controller Hub EG20T. It
186 supports 10/100/1000 Mbps operation.
191 Enable the support of the Reduced Gigabit Media-Independent
195 bool "Realtek 8139 series Ethernet controller driver"
197 This driver supports Realtek 8139 series fast ethernet family of
198 PCI chipsets/adapters.
201 bool "Realtek 8169 series Ethernet controller driver"
203 This driver supports Realtek 8169 series gigabit ethernet family of
204 PCI/PCIe chipsets/adapters.
207 bool "Enable Allwinner GMAC Ethernet support"
209 Enable the support for Sun7i GMAC Ethernet controller
212 bool "Allwinner Sun4i Ethernet MAC support"
215 This driver supports the Allwinner based SUN4I Ethernet MAC.
218 bool "Allwinner Sun8i Ethernet MAC support"
223 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
224 It can be found in H3/A64/A83T based SoCs and compatible with both
225 External and Internal PHYs.
227 config XILINX_AXIEMAC
228 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
231 bool "Xilinx AXI Ethernet"
233 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
235 config XILINX_EMACLITE
236 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
239 bool "Xilinx Ethernetlite"
241 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
244 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
246 bool "Xilinx Ethernet GEM"
248 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
251 bool "Microchip PIC32 Ethernet Support"
252 depends on DM_ETH && MACH_PIC32
255 This driver implements 10/100 Mbps Ethernet and MAC layer for
256 Microchip PIC32 microcontrollers.
259 bool "Rockchip Synopsys Designware Ethernet MAC"
260 depends on DM_ETH && ETH_DESIGNWARE
262 This driver provides Rockchip SoCs network support based on the
263 Synopsys Designware driver.
266 bool "Renesas Ethernet AVB MAC"
267 depends on DM_ETH && RCAR_GEN3
270 This driver implements support for the Ethernet AVB block in
271 Renesas M3 and H3 SoCs.
274 bool "Fast Ethernet Controller on MPC8XX"
278 This driver implements support for the Fast Ethernet Controller
283 depends on MPC8XX_FEC
288 depends on ETHER_ON_FEC1
291 Define to the hardcoded PHY address which corresponds
292 to the given FEC; i. e.
293 #define CONFIG_FEC1_PHY 4
294 means that the PHY with address 4 is connected to FEC1
296 When set to -1, means to probe for first available.
300 depends on ETHER_ON_FEC1
303 The PHY does not have a RXERR line (RMII only).
304 (so program the FEC to ignore it).
308 depends on MPC8XX_FEC && MPC885
313 depends on ETHER_ON_FEC2
316 Define to the hardcoded PHY address which corresponds
317 to the given FEC; i. e.
318 #define CONFIG_FEC1_PHY 4
319 means that the PHY with address 4 is connected to FEC1
321 When set to -1, means to probe for first available.
323 config FEC2_PHY_NORXERR
325 depends on ETHER_ON_FEC2
328 The PHY does not have a RXERR line (RMII only).
329 (so program the FEC to ignore it).