1 source "drivers/net/phy/Kconfig"
2 source "drivers/net/pfe_eth/Kconfig"
3 source "drivers/net/fsl-mc/Kconfig"
6 bool "Enable Driver Model for Ethernet drivers"
9 Enable driver model for Ethernet.
11 The eth_*() interface will be implemented by the UCLASS_ETH class
12 This is currently implemented in net/eth-uclass.c
13 Look in include/net.h for details.
16 bool "Enable Driver Model for MDIO devices"
17 depends on DM_ETH && PHYLIB
19 Enable driver model for MDIO devices
21 Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
22 stand-alone devices. Useful in particular for systems that support
23 DM_ETH and have a stand-alone MDIO hardware block shared by multiple
25 This is currently implemented in net/mdio-uclass.c
26 Look in include/miiphy.h for details.
29 bool "Enable Driver Model for MDIO MUX devices"
32 Enable driver model for MDIO MUX devices
34 Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
35 systems that support DM_MDIO and integrate one or multiple muxes on
37 This is currently implemented in net/mdio-mux-uclass.c
38 Look in include/miiphy.h for details.
41 depends on DM_MDIO && SANDBOX
43 bool "Sandbox: Mocked MDIO driver"
45 This driver implements dummy read/write/reset MDIO functions mimicking
46 a bus with a single PHY.
48 This driver is used in for testing in test/dm/mdio.c
50 config MDIO_MUX_SANDBOX
51 depends on DM_MDIO_MUX && MDIO_SANDBOX
53 bool "Sandbox: Mocked MDIO-MUX driver"
55 This driver implements dummy select/deselect ops mimicking a MUX on
56 the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
58 This driver is used for testing in test/dm/mdio.c
61 bool "Enable Driver Model for Ethernet Generic PHY drivers"
64 Enable driver model for Ethernet Generic PHY .
67 bool "Network device support"
71 You must select Y to enable any network device support
72 Generally if you have any networking support this is a given
79 bool "Enable GbE PHY status parsing and configuration"
81 Enables support for parsing the status output and for
82 configuring GbE PHYs (affects the inner workings of some
83 commands and miiphyutil.c).
86 bool "Atheros AG7xxx Ethernet MAC support"
87 depends on DM_ETH && ARCH_ATH79
90 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
91 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
95 bool "Altera Triple-Speed Ethernet MAC support"
99 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
100 Please find details on the "Triple-Speed Ethernet MegaCore Function
101 Resource Center" of Altera.
104 bool "Broadcom SF2 (Starfighter2) Ethernet support"
107 This is an abstract framework which provides a generic interface
108 to MAC and DMA management for multiple Broadcom SoCs such as
109 Cygnus, NSP and bcm28155_ap platforms.
111 config BCM_SF2_ETH_DEFAULT_PORT
112 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
113 depends on BCM_SF2_ETH
116 Default port number for the Starfighter2 ethernet driver.
118 config BCM_SF2_ETH_GMAC
119 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
120 depends on BCM_SF2_ETH
122 This flag enables the ethernet support for Broadcom platforms with
123 GMAC such as Cygnus. This driver is based on the framework provided
124 by the BCM_SF2_ETH driver.
125 Say Y to any bcmcygnus based platforms.
128 bool "BCM6348 EMAC support"
129 depends on DM_ETH && ARCH_BMIPS
135 This driver supports the BCM6348 Ethernet MAC.
138 bool "BCM6368 EMAC support"
139 depends on DM_ETH && ARCH_BMIPS
143 This driver supports the BCM6368 Ethernet MAC.
146 bool "BCMGENET V5 support"
150 This driver supports the BCMGENET Ethernet MAC.
153 bool "Synopsys DWC Ethernet QOS device support"
157 This driver supports the Synopsys Designware Ethernet QOS (Quality
158 Of Service) IP block. The IP supports many options for bus type,
159 clocking/reset structure, and feature list. This driver currently
160 supports the specific configuration used in NVIDIA's Tegra186 chip,
161 but should be extensible to other combinations quite easily.
164 bool "Intel PRO/1000 Gigabit Ethernet support"
165 depends on (DM_ETH && DM_PCI) || !DM_ETH
167 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
168 adapters. For more information on how to identify your adapter, go
169 to the Adapter & Driver ID Guide at:
171 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
173 config E1000_SPI_GENERIC
174 bool "Allow access to the Intel 8257x SPI bus"
177 Allow generic access to the SPI bus on the Intel 8257x, for
178 example with the "sspi" command.
181 bool "Enable SPI bus utility code"
184 Utility code for direct access to the SPI bus on Intel 8257x.
185 This does not do anything useful unless you set at least one
186 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
189 bool "Enable the e1000 command"
192 This enables the 'e1000' management command for E1000 devices. When
193 used on devices with SPI support you can reprogram the EEPROM from
197 depends on DM_ETH && SANDBOX
199 bool "Sandbox: Mocked Ethernet driver"
201 This driver simply responds with fake ARP replies and ping
202 replies that are used to verify network stack functionality
204 This driver is particularly useful in the test/dm/eth.c tests
206 config ETH_SANDBOX_RAW
207 depends on DM_ETH && SANDBOX
209 bool "Sandbox: Bridge to Linux Raw Sockets"
211 This driver is a bridge from the bottom of the network stack
212 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
213 network traffic to be tested from within sandbox. See
214 doc/arch/index.rst for more details.
216 config ETH_DESIGNWARE
217 bool "Synopsys Designware Ethernet MAC"
219 imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
221 This MAC is present in SoCs from various vendors. It supports
222 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
223 provide the PHY (physical media interface).
225 config ETH_DESIGNWARE_SOCFPGA
228 bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
229 depends on DM_ETH && ETH_DESIGNWARE
231 The Altera SoCFPGA requires additional configuration of the
232 Altera system manager to correctly interface with the PHY.
233 This code handles those SoC specifics.
236 bool "OpenCores 10/100 Mbps Ethernet MAC"
238 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
240 config FEC_MXC_SHARE_MDIO
241 bool "Share the MDIO bus for FEC controller"
244 config FEC_MXC_MDIO_BASE
245 hex "MDIO base address for the FEC controller"
246 depends on FEC_MXC_SHARE_MDIO
248 This specifies the MDIO registers base address. It is used when
249 two FEC controllers share MDIO bus.
252 bool "FEC Ethernet controller"
253 depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || VF610
255 This driver supports the 10/100 Fast Ethernet controller for
259 bool "Freescale FMan ethernet support"
260 depends on ARM || PPC
262 This driver support the Freescale FMan Ethernet controller
265 bool "Ftmac100 Ethernet Support"
267 This MAC is present in Andestech SoCs.
270 bool "Ftgmac100 Ethernet Support"
274 This driver supports the Faraday's FTGMAC100 Gigabit SoC
275 Ethernet controller that can be found on Aspeed SoCs (which
278 It is fully compliant with IEEE 802.3 specification for
279 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
280 Mbps Ethernet and includes Reduced Media Independent
281 Interface (RMII) and Reduced Gigabit Media Independent
282 Interface (RGMII) interfaces. It adopts an AHB bus interface
283 and integrates a link list DMA engine with direct M-Bus
284 accesses for transmitting and receiving packets. It has
285 independent TX/RX fifos, supports half and full duplex (1000
286 Mbps mode only supports full duplex), flow control for full
287 duplex and backpressure for half duplex.
289 The FTGMAC100 also implements IP, TCP, UDP checksum offloads
290 and supports IEEE 802.1Q VLAN tag insertion and removal. It
291 offers high-priority transmit queue for QoS and CoS
296 bool "ColdFire Ethernet Support"
300 This driver supports the network interface units in the
304 bool "ColdFire DMA Ethernet Support"
308 This driver supports the network interface units in the
312 bool "Microchip KS8851-MLL controller driver"
314 The Microchip KS8851 parallel bus external ethernet interface chip.
318 config KS8851_MLL_BASEADDR
319 hex "Microchip KS8851-MLL Base Address"
321 Define this to hold the physical address of the device (I/O space)
326 bool "Marvell Orion5x/Kirkwood network interface support"
327 depends on ARCH_KIRKWOOD || ARCH_ORION5X
328 select PHYLIB if DM_ETH
330 This driver supports the network interface units in the
331 Marvell Orion5x and Kirkwood SoCs
334 bool "Marvell Armada XP/385/3700 network interface support"
335 depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
338 This driver supports the network interface units in the
339 Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
342 bool "Marvell Armada 375/7K/8K network interface support"
343 depends on ARMADA_375 || ARMADA_8K
348 This driver supports the network interface units in the
349 Marvell ARMADA 375, 7K and 8K SoCs.
352 bool "Cadence MACB/GEM Ethernet Interface"
356 The Cadence MACB ethernet interface is found on many Atmel
357 AT91 and SAMA5 parts. This driver also supports the Cadence
358 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
359 Say Y to include support for the MACB/GEM chip.
362 bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
365 The Cadence MACB ethernet interface was used on Zynq platform.
366 Say Y to enable support for the MACB/GEM in Zynq chip.
369 bool "MediaTek MT7628 Ethernet Interface"
370 depends on SOC_MT7628
373 The MediaTek MT7628 ethernet interface is used on MT7628 and
377 bool "Intel Platform Controller Hub EG20T GMAC driver"
378 depends on DM_ETH && DM_PCI
381 This MAC is present in Intel Platform Controller Hub EG20T. It
382 supports 10/100/1000 Mbps operation.
387 Enable the support of the Reduced Gigabit Media-Independent
393 Enable support of the Media-Independent Interface (MII)
396 bool "Realtek 8139 series Ethernet controller driver"
398 This driver supports Realtek 8139 series fast ethernet family of
399 PCI chipsets/adapters.
402 bool "Realtek 8169 series Ethernet controller driver"
404 This driver supports Realtek 8169 series gigabit ethernet family of
405 PCI/PCIe chipsets/adapters.
408 bool "SMSC LAN911x and LAN921x controller driver"
414 hex "SMC911X Base Address"
416 Define this to hold the physical address
417 of the device (I/O space)
421 prompt "SMC911X bus width"
422 default SMC911X_16_BIT
424 config SMC911X_32_BIT
425 bool "Enable 32-bit interface"
427 config SMC911X_16_BIT
428 bool "Enable 16-bit interface"
430 Define this if data bus is 16 bits. If your processor
431 automatically converts one 32 bit word to two 16 bit
432 words you may also try CONFIG_SMC911X_32_BIT.
438 bool "Enable Allwinner GMAC Ethernet support"
440 Enable the support for Sun7i GMAC Ethernet controller
442 config SUN7I_GMAC_FORCE_TXERR
443 bool "Force PA17 as gmac function"
444 depends on SUN7I_GMAC
446 Some ethernet phys needs TXERR control. Since the GMAC
447 doesn't have such signal, setting PA17 as GMAC function
448 makes the pin output low, which enables data transmission.
451 bool "Allwinner Sun4i Ethernet MAC support"
455 This driver supports the Allwinner based SUN4I Ethernet MAC.
458 bool "Allwinner Sun8i Ethernet MAC support"
463 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
464 It can be found in H3/A64/A83T based SoCs and compatible with both
465 External and Internal PHYs.
468 bool "Renesas SH Ethernet MAC"
471 This driver supports the Ethernet for Renesas SH and ARM SoCs.
473 source "drivers/net/ti/Kconfig"
475 config XILINX_AXIEMAC
476 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
479 bool "Xilinx AXI Ethernet"
481 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
483 config XILINX_EMACLITE
484 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
487 bool "Xilinx Ethernetlite"
489 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
492 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
494 bool "Xilinx Ethernet GEM"
496 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
499 bool "Microchip PIC32 Ethernet Support"
500 depends on DM_ETH && MACH_PIC32
503 This driver implements 10/100 Mbps Ethernet and MAC layer for
504 Microchip PIC32 microcontrollers.
507 bool "Rockchip Synopsys Designware Ethernet MAC"
508 depends on DM_ETH && ETH_DESIGNWARE
510 This driver provides Rockchip SoCs network support based on the
511 Synopsys Designware driver.
514 bool "Renesas Ethernet AVB MAC"
515 depends on DM_ETH && RCAR_GEN3
518 This driver implements support for the Ethernet AVB block in
519 Renesas M3 and H3 SoCs.
522 bool "Fast Ethernet Controller on MPC8XX"
526 This driver implements support for the Fast Ethernet Controller
530 bool "Socionext AVE Ethernet support"
531 depends on DM_ETH && ARCH_UNIPHIER
536 This driver implements support for the Socionext AVE Ethernet
537 controller, as found on the Socionext UniPhier family.
539 source "drivers/net/mscc_eswitch/Kconfig"
543 depends on MPC8XX_FEC
548 depends on ETHER_ON_FEC1
551 Define to the hardcoded PHY address which corresponds
552 to the given FEC; i. e.
553 #define CONFIG_FEC1_PHY 4
554 means that the PHY with address 4 is connected to FEC1
556 When set to -1, means to probe for first available.
560 depends on ETHER_ON_FEC1
563 The PHY does not have a RXERR line (RMII only).
564 (so program the FEC to ignore it).
568 depends on MPC8XX_FEC && MPC885
573 depends on ETHER_ON_FEC2
576 Define to the hardcoded PHY address which corresponds
577 to the given FEC; i. e.
578 #define CONFIG_FEC1_PHY 4
579 means that the PHY with address 4 is connected to FEC1
581 When set to -1, means to probe for first available.
583 config FEC2_PHY_NORXERR
585 depends on ETHER_ON_FEC2
588 The PHY does not have a RXERR line (RMII only).
589 (so program the FEC to ignore it).
591 config SYS_DPAA_QBMAN
592 bool "Device tree fixup for QBMan on freescale SOCs"
593 depends on (ARM || PPC) && !SPL_BUILD
594 default y if ARCH_B4860 || \
613 QBman fixups to allow deep sleep in DPAA 1 SOCs
617 bool "Enable Three-Speed Ethernet Controller"
619 This driver implements support for the (Enhanced) Three-Speed
620 Ethernet Controller found on Freescale SoCs.
623 bool "MediaTek Ethernet GMAC Driver"
629 This Driver support MediaTek Ethernet GMAC
630 Say Y to enable support for the MediaTek Ethernet GMAC.
632 config HIGMACV300_ETH
633 bool "HiSilicon Gigabit Ethernet Controller"
638 This driver supports HIGMACV300 Ethernet controller found on
642 bool "NXP ENETC Ethernet controller"
643 depends on DM_PCI && DM_ETH && DM_MDIO
645 This driver supports the NXP ENETC Ethernet controller found on some
648 config MDIO_MUX_I2CREG
649 bool "MDIO MUX accessed as a register over I2C"
650 depends on DM_MDIO_MUX && DM_I2C
652 This driver is used for MDIO muxes driven by writing to a register of
653 an I2C chip. The board it was developed for uses a mux controlled by
654 on-board FPGA which in turn is accessed as a chip over I2C.
657 bool "Marvell MDIO interface support"
660 This driver supports the MDIO interface found in the network
661 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
662 Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
664 This driver is used by the MVPP2 and MVNETA drivers.
667 bool "NXP Layerscape MDIO interface support"
670 This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
671 on the mEMAC (which supports both Clauses 22 and 45).