1 source "drivers/net/phy/Kconfig"
2 source "drivers/net/pfe_eth/Kconfig"
3 source "drivers/net/fsl-mc/Kconfig"
6 bool "Enable Driver Model for Ethernet drivers"
9 Enable driver model for Ethernet.
11 The eth_*() interface will be implemented by the UCLASS_ETH class
12 This is currently implemented in net/eth-uclass.c
13 Look in include/net.h for details.
16 bool "Enable Driver Model for MDIO devices"
17 depends on DM_ETH && PHYLIB
19 Enable driver model for MDIO devices
21 Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
22 stand-alone devices. Useful in particular for systems that support
23 DM_ETH and have a stand-alone MDIO hardware block shared by multiple
25 This is currently implemented in net/mdio-uclass.c
26 Look in include/miiphy.h for details.
29 bool "Enable Driver Model for MDIO MUX devices"
32 Enable driver model for MDIO MUX devices
34 Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
35 systems that support DM_MDIO and integrate one or multiple muxes on
37 This is currently implemented in net/mdio-mux-uclass.c
38 Look in include/miiphy.h for details.
41 depends on DM_MDIO && SANDBOX
43 bool "Sandbox: Mocked MDIO driver"
45 This driver implements dummy read/write/reset MDIO functions mimicking
46 a bus with a single PHY.
48 This driver is used in for testing in test/dm/mdio.c
50 config MDIO_MUX_SANDBOX
51 depends on DM_MDIO_MUX && MDIO_SANDBOX
53 bool "Sandbox: Mocked MDIO-MUX driver"
55 This driver implements dummy select/deselect ops mimicking a MUX on
56 the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
58 This driver is used for testing in test/dm/mdio.c
61 bool "Network device support"
65 You must select Y to enable any network device support
66 Generally if you have any networking support this is a given
73 bool "Enable GbE PHY status parsing and configuration"
75 Enables support for parsing the status output and for
76 configuring GbE PHYs (affects the inner workings of some
77 commands and miiphyutil.c).
80 bool "Atheros AG7xxx Ethernet MAC support"
81 depends on DM_ETH && ARCH_ATH79
84 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
85 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
89 bool "Altera Triple-Speed Ethernet MAC support"
93 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
94 Please find details on the "Triple-Speed Ethernet MegaCore Function
95 Resource Center" of Altera.
98 bool "Broadcom SF2 (Starfighter2) Ethernet support"
101 This is an abstract framework which provides a generic interface
102 to MAC and DMA management for multiple Broadcom SoCs such as
103 Cygnus, NSP and bcm28155_ap platforms.
105 config BCM_SF2_ETH_DEFAULT_PORT
106 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
107 depends on BCM_SF2_ETH
110 Default port number for the Starfighter2 ethernet driver.
112 config BCM_SF2_ETH_GMAC
113 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
114 depends on BCM_SF2_ETH
116 This flag enables the ethernet support for Broadcom platforms with
117 GMAC such as Cygnus. This driver is based on the framework provided
118 by the BCM_SF2_ETH driver.
119 Say Y to any bcmcygnus based platforms.
122 bool "BCM6348 EMAC support"
123 depends on DM_ETH && ARCH_BMIPS
129 This driver supports the BCM6348 Ethernet MAC.
132 bool "BCM6368 EMAC support"
133 depends on DM_ETH && ARCH_BMIPS
137 This driver supports the BCM6368 Ethernet MAC.
140 bool "BCMGENET V5 support"
144 This driver supports the BCMGENET Ethernet MAC.
147 bool "Synopsys DWC Ethernet QOS device support"
151 This driver supports the Synopsys Designware Ethernet QOS (Quality
152 Of Service) IP block. The IP supports many options for bus type,
153 clocking/reset structure, and feature list. This driver currently
154 supports the specific configuration used in NVIDIA's Tegra186 chip,
155 but should be extensible to other combinations quite easily.
158 bool "Intel PRO/1000 Gigabit Ethernet support"
160 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
161 adapters. For more information on how to identify your adapter, go
162 to the Adapter & Driver ID Guide at:
164 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
166 config E1000_SPI_GENERIC
167 bool "Allow access to the Intel 8257x SPI bus"
170 Allow generic access to the SPI bus on the Intel 8257x, for
171 example with the "sspi" command.
174 bool "Enable SPI bus utility code"
177 Utility code for direct access to the SPI bus on Intel 8257x.
178 This does not do anything useful unless you set at least one
179 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
182 bool "Enable the e1000 command"
185 This enables the 'e1000' management command for E1000 devices. When
186 used on devices with SPI support you can reprogram the EEPROM from
190 depends on DM_ETH && SANDBOX
192 bool "Sandbox: Mocked Ethernet driver"
194 This driver simply responds with fake ARP replies and ping
195 replies that are used to verify network stack functionality
197 This driver is particularly useful in the test/dm/eth.c tests
199 config ETH_SANDBOX_RAW
200 depends on DM_ETH && SANDBOX
202 bool "Sandbox: Bridge to Linux Raw Sockets"
204 This driver is a bridge from the bottom of the network stack
205 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
206 network traffic to be tested from within sandbox. See
207 doc/arch/index.rst for more details.
209 config ETH_DESIGNWARE
210 bool "Synopsys Designware Ethernet MAC"
212 imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
214 This MAC is present in SoCs from various vendors. It supports
215 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
216 provide the PHY (physical media interface).
218 config ETH_DESIGNWARE_SOCFPGA
221 bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
222 depends on DM_ETH && ETH_DESIGNWARE
224 The Altera SoCFPGA requires additional configuration of the
225 Altera system manager to correctly interface with the PHY.
226 This code handles those SoC specifics.
229 bool "OpenCores 10/100 Mbps Ethernet MAC"
231 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
233 config FEC_MXC_SHARE_MDIO
234 bool "Share the MDIO bus for FEC controller"
237 config FEC_MXC_MDIO_BASE
238 hex "MDIO base address for the FEC controller"
239 depends on FEC_MXC_SHARE_MDIO
241 This specifies the MDIO registers base address. It is used when
242 two FEC controllers share MDIO bus.
245 bool "FEC Ethernet controller"
246 depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || VF610
248 This driver supports the 10/100 Fast Ethernet controller for
252 bool "Freescale FMan ethernet support"
253 depends on ARM || PPC
255 This driver support the Freescale FMan Ethernet controller
258 bool "Ftmac100 Ethernet Support"
260 This MAC is present in Andestech SoCs.
263 bool "Ftgmac100 Ethernet Support"
267 This driver supports the Faraday's FTGMAC100 Gigabit SoC
268 Ethernet controller that can be found on Aspeed SoCs (which
271 It is fully compliant with IEEE 802.3 specification for
272 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
273 Mbps Ethernet and includes Reduced Media Independent
274 Interface (RMII) and Reduced Gigabit Media Independent
275 Interface (RGMII) interfaces. It adopts an AHB bus interface
276 and integrates a link list DMA engine with direct M-Bus
277 accesses for transmitting and receiving packets. It has
278 independent TX/RX fifos, supports half and full duplex (1000
279 Mbps mode only supports full duplex), flow control for full
280 duplex and backpressure for half duplex.
282 The FTGMAC100 also implements IP, TCP, UDP checksum offloads
283 and supports IEEE 802.1Q VLAN tag insertion and removal. It
284 offers high-priority transmit queue for QoS and CoS
289 bool "ColdFire Ethernet Support"
293 This driver supports the network interface units in the
297 bool "ColdFire DMA Ethernet Support"
301 This driver supports the network interface units in the
305 bool "Marvell Orion5x/Kirkwood network interface support"
306 depends on KIRKWOOD || ORION5X
307 select PHYLIB if DM_ETH
309 This driver supports the network interface units in the
310 Marvell Orion5x and Kirkwood SoCs
313 bool "Marvell Armada XP/385/3700 network interface support"
314 depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
317 This driver supports the network interface units in the
318 Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
321 bool "Marvell Armada 375/7K/8K network interface support"
322 depends on ARMADA_375 || ARMADA_8K
327 This driver supports the network interface units in the
328 Marvell ARMADA 375, 7K and 8K SoCs.
331 bool "Cadence MACB/GEM Ethernet Interface"
335 The Cadence MACB ethernet interface is found on many Atmel
336 AT91 and SAMA5 parts. This driver also supports the Cadence
337 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
338 Say Y to include support for the MACB/GEM chip.
341 bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
344 The Cadence MACB ethernet interface was used on Zynq platform.
345 Say Y to enable support for the MACB/GEM in Zynq chip.
348 bool "MediaTek MT7628 Ethernet Interface"
349 depends on SOC_MT7628
352 The MediaTek MT7628 ethernet interface is used on MT7628 and
356 bool "Intel Platform Controller Hub EG20T GMAC driver"
357 depends on DM_ETH && DM_PCI
360 This MAC is present in Intel Platform Controller Hub EG20T. It
361 supports 10/100/1000 Mbps operation.
366 Enable the support of the Reduced Gigabit Media-Independent
372 Enable support of the Media-Independent Interface (MII)
375 bool "Realtek 8139 series Ethernet controller driver"
377 This driver supports Realtek 8139 series fast ethernet family of
378 PCI chipsets/adapters.
381 bool "Realtek 8169 series Ethernet controller driver"
383 This driver supports Realtek 8169 series gigabit ethernet family of
384 PCI/PCIe chipsets/adapters.
387 bool "SMSC LAN911x and LAN921x controller driver"
392 hex "SMC911X Base Address"
394 Define this to hold the physical address
395 of the device (I/O space)
398 prompt "SMC911X bus width"
399 default SMC911X_16_BIT
401 config SMC911X_32_BIT
402 bool "Enable 32-bit interface"
404 config SMC911X_16_BIT
405 bool "Enable 16-bit interface"
407 Define this if data bus is 16 bits. If your processor
408 automatically converts one 32 bit word to two 16 bit
409 words you may also try CONFIG_SMC911X_32_BIT.
415 bool "Enable Allwinner GMAC Ethernet support"
417 Enable the support for Sun7i GMAC Ethernet controller
419 config SUN7I_GMAC_FORCE_TXERR
420 bool "Force PA17 as gmac function"
421 depends on SUN7I_GMAC
423 Some ethernet phys needs TXERR control. Since the GMAC
424 doesn't have such signal, setting PA17 as GMAC function
425 makes the pin output low, which enables data transmission.
428 bool "Allwinner Sun4i Ethernet MAC support"
432 This driver supports the Allwinner based SUN4I Ethernet MAC.
435 bool "Allwinner Sun8i Ethernet MAC support"
440 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
441 It can be found in H3/A64/A83T based SoCs and compatible with both
442 External and Internal PHYs.
445 bool "Renesas SH Ethernet MAC"
448 This driver supports the Ethernet for Renesas SH and ARM SoCs.
450 source "drivers/net/ti/Kconfig"
452 config XILINX_AXIEMAC
453 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
456 bool "Xilinx AXI Ethernet"
458 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
460 config XILINX_EMACLITE
461 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
464 bool "Xilinx Ethernetlite"
466 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
469 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
471 bool "Xilinx Ethernet GEM"
473 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
476 bool "Microchip PIC32 Ethernet Support"
477 depends on DM_ETH && MACH_PIC32
480 This driver implements 10/100 Mbps Ethernet and MAC layer for
481 Microchip PIC32 microcontrollers.
484 bool "Rockchip Synopsys Designware Ethernet MAC"
485 depends on DM_ETH && ETH_DESIGNWARE
487 This driver provides Rockchip SoCs network support based on the
488 Synopsys Designware driver.
491 bool "Renesas Ethernet AVB MAC"
492 depends on DM_ETH && RCAR_GEN3
495 This driver implements support for the Ethernet AVB block in
496 Renesas M3 and H3 SoCs.
499 bool "Fast Ethernet Controller on MPC8XX"
503 This driver implements support for the Fast Ethernet Controller
507 bool "Socionext AVE Ethernet support"
508 depends on DM_ETH && ARCH_UNIPHIER
513 This driver implements support for the Socionext AVE Ethernet
514 controller, as found on the Socionext UniPhier family.
516 source "drivers/net/mscc_eswitch/Kconfig"
520 depends on MPC8XX_FEC
525 depends on ETHER_ON_FEC1
528 Define to the hardcoded PHY address which corresponds
529 to the given FEC; i. e.
530 #define CONFIG_FEC1_PHY 4
531 means that the PHY with address 4 is connected to FEC1
533 When set to -1, means to probe for first available.
537 depends on ETHER_ON_FEC1
540 The PHY does not have a RXERR line (RMII only).
541 (so program the FEC to ignore it).
545 depends on MPC8XX_FEC && MPC885
550 depends on ETHER_ON_FEC2
553 Define to the hardcoded PHY address which corresponds
554 to the given FEC; i. e.
555 #define CONFIG_FEC1_PHY 4
556 means that the PHY with address 4 is connected to FEC1
558 When set to -1, means to probe for first available.
560 config FEC2_PHY_NORXERR
562 depends on ETHER_ON_FEC2
565 The PHY does not have a RXERR line (RMII only).
566 (so program the FEC to ignore it).
568 config SYS_DPAA_QBMAN
569 bool "Device tree fixup for QBMan on freescale SOCs"
570 depends on (ARM || PPC) && !SPL_BUILD
571 default y if ARCH_B4860 || \
590 QBman fixups to allow deep sleep in DPAA 1 SOCs
594 bool "Enable Three-Speed Ethernet Controller"
596 This driver implements support for the (Enhanced) Three-Speed
597 Ethernet Controller found on Freescale SoCs.
600 bool "MediaTek Ethernet GMAC Driver"
606 This Driver support MediaTek Ethernet GMAC
607 Say Y to enable support for the MediaTek Ethernet GMAC.
609 config HIGMACV300_ETH
610 bool "HiSilicon Gigabit Ethernet Controller"
615 This driver supports HIGMACV300 Ethernet controller found on
619 bool "NXP ENETC Ethernet controller"
620 depends on DM_PCI && DM_ETH && DM_MDIO
622 This driver supports the NXP ENETC Ethernet controller found on some
625 config MDIO_MUX_I2CREG
626 bool "MDIO MUX accessed as a register over I2C"
627 depends on DM_MDIO_MUX && DM_I2C
629 This driver is used for MDIO muxes driven by writing to a register of
630 an I2C chip. The board it was developed for uses a mux controlled by
631 on-board FPGA which in turn is accessed as a chip over I2C.
634 bool "Marvell MDIO interface support"
637 This driver supports the MDIO interface found in the network
638 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
639 Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
641 This driver is used by the MVPP2 and MVNETA drivers.
644 bool "NXP Layerscape MDIO interface support"
647 This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
648 on the mEMAC (which supports both Clauses 22 and 45).