1 source "drivers/net/phy/Kconfig"
2 source "drivers/net/pfe_eth/Kconfig"
3 source "drivers/net/fsl-mc/Kconfig"
6 bool "Enable Driver Model for Ethernet drivers"
9 Enable driver model for Ethernet.
11 The eth_*() interface will be implemented by the UCLASS_ETH class
12 This is currently implemented in net/eth-uclass.c
13 Look in include/net.h for details.
16 bool "Enable Driver Model for MDIO devices"
17 depends on DM_ETH && PHYLIB
19 Enable driver model for MDIO devices
21 Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
22 stand-alone devices. Useful in particular for systems that support
23 DM_ETH and have a stand-alone MDIO hardware block shared by multiple
25 This is currently implemented in net/mdio-uclass.c
26 Look in include/miiphy.h for details.
29 bool "Enable Driver Model for MDIO MUX devices"
32 Enable driver model for MDIO MUX devices
34 Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
35 systems that support DM_MDIO and integrate one or multiple muxes on
37 This is currently implemented in net/mdio-mux-uclass.c
38 Look in include/miiphy.h for details.
41 depends on DM_MDIO && SANDBOX
43 bool "Sandbox: Mocked MDIO driver"
45 This driver implements dummy read/write/reset MDIO functions mimicking
46 a bus with a single PHY.
48 This driver is used in for testing in test/dm/mdio.c
50 config MDIO_MUX_SANDBOX
51 depends on DM_MDIO_MUX && MDIO_SANDBOX
53 bool "Sandbox: Mocked MDIO-MUX driver"
55 This driver implements dummy select/deselect ops mimicking a MUX on
56 the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
58 This driver is used for testing in test/dm/mdio.c
61 bool "Enable Driver Model for Ethernet Generic PHY drivers"
64 Enable driver model for Ethernet Generic PHY .
67 bool "Network device support"
71 You must select Y to enable any network device support
72 Generally if you have any networking support this is a given
79 bool "Enable GbE PHY status parsing and configuration"
81 Enables support for parsing the status output and for
82 configuring GbE PHYs (affects the inner workings of some
83 commands and miiphyutil.c).
86 bool "Atheros AG7xxx Ethernet MAC support"
87 depends on DM_ETH && ARCH_ATH79
90 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
91 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
95 bool "Altera Triple-Speed Ethernet MAC support"
99 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
100 Please find details on the "Triple-Speed Ethernet MegaCore Function
101 Resource Center" of Altera.
104 bool "Broadcom SF2 (Starfighter2) Ethernet support"
107 This is an abstract framework which provides a generic interface
108 to MAC and DMA management for multiple Broadcom SoCs such as
109 Cygnus, NSP and bcm28155_ap platforms.
111 config BCM_SF2_ETH_DEFAULT_PORT
112 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
113 depends on BCM_SF2_ETH
116 Default port number for the Starfighter2 ethernet driver.
118 config BCM_SF2_ETH_GMAC
119 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
120 depends on BCM_SF2_ETH
122 This flag enables the ethernet support for Broadcom platforms with
123 GMAC such as Cygnus. This driver is based on the framework provided
124 by the BCM_SF2_ETH driver.
125 Say Y to any bcmcygnus based platforms.
128 bool "BCM6348 EMAC support"
129 depends on DM_ETH && ARCH_BMIPS
135 This driver supports the BCM6348 Ethernet MAC.
138 bool "BCM6368 EMAC support"
139 depends on DM_ETH && ARCH_BMIPS
143 This driver supports the BCM6368 Ethernet MAC.
146 bool "BCMGENET V5 support"
150 This driver supports the BCMGENET Ethernet MAC.
153 bool "Synopsys DWC Ethernet QOS device support"
157 This driver supports the Synopsys Designware Ethernet QOS (Quality
158 Of Service) IP block. The IP supports many options for bus type,
159 clocking/reset structure, and feature list. This driver currently
160 supports the specific configuration used in NVIDIA's Tegra186 chip,
161 but should be extensible to other combinations quite easily.
164 bool "Intel PRO/1000 Gigabit Ethernet support"
165 depends on (DM_ETH && DM_PCI) || !DM_ETH
167 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
168 adapters. For more information on how to identify your adapter, go
169 to the Adapter & Driver ID Guide at:
171 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
173 config E1000_SPI_GENERIC
174 bool "Allow access to the Intel 8257x SPI bus"
177 Allow generic access to the SPI bus on the Intel 8257x, for
178 example with the "sspi" command.
181 bool "Enable SPI bus utility code"
184 Utility code for direct access to the SPI bus on Intel 8257x.
185 This does not do anything useful unless you set at least one
186 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
189 bool "Enable the e1000 command"
192 This enables the 'e1000' management command for E1000 devices. When
193 used on devices with SPI support you can reprogram the EEPROM from
197 bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
199 This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
200 ethernet family of adapters.
203 depends on DM_ETH && SANDBOX
205 bool "Sandbox: Mocked Ethernet driver"
207 This driver simply responds with fake ARP replies and ping
208 replies that are used to verify network stack functionality
210 This driver is particularly useful in the test/dm/eth.c tests
212 config ETH_SANDBOX_RAW
213 depends on DM_ETH && SANDBOX
215 bool "Sandbox: Bridge to Linux Raw Sockets"
217 This driver is a bridge from the bottom of the network stack
218 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
219 network traffic to be tested from within sandbox. See
220 doc/arch/index.rst for more details.
222 config ETH_DESIGNWARE
223 bool "Synopsys Designware Ethernet MAC"
225 imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
227 This MAC is present in SoCs from various vendors. It supports
228 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
229 provide the PHY (physical media interface).
231 config ETH_DESIGNWARE_SOCFPGA
234 bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
235 depends on DM_ETH && ETH_DESIGNWARE
237 The Altera SoCFPGA requires additional configuration of the
238 Altera system manager to correctly interface with the PHY.
239 This code handles those SoC specifics.
242 bool "OpenCores 10/100 Mbps Ethernet MAC"
244 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
246 config FEC_MXC_SHARE_MDIO
247 bool "Share the MDIO bus for FEC controller"
250 config FEC_MXC_MDIO_BASE
251 hex "MDIO base address for the FEC controller"
252 depends on FEC_MXC_SHARE_MDIO
254 This specifies the MDIO registers base address. It is used when
255 two FEC controllers share MDIO bus.
258 bool "FEC Ethernet controller"
259 depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || VF610
261 This driver supports the 10/100 Fast Ethernet controller for
265 bool "Freescale FMan ethernet support"
266 depends on ARM || PPC
268 This driver support the Freescale FMan Ethernet controller
271 bool "Ftmac100 Ethernet Support"
273 This MAC is present in Andestech SoCs.
276 bool "Ftgmac100 Ethernet Support"
280 This driver supports the Faraday's FTGMAC100 Gigabit SoC
281 Ethernet controller that can be found on Aspeed SoCs (which
284 It is fully compliant with IEEE 802.3 specification for
285 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
286 Mbps Ethernet and includes Reduced Media Independent
287 Interface (RMII) and Reduced Gigabit Media Independent
288 Interface (RGMII) interfaces. It adopts an AHB bus interface
289 and integrates a link list DMA engine with direct M-Bus
290 accesses for transmitting and receiving packets. It has
291 independent TX/RX fifos, supports half and full duplex (1000
292 Mbps mode only supports full duplex), flow control for full
293 duplex and backpressure for half duplex.
295 The FTGMAC100 also implements IP, TCP, UDP checksum offloads
296 and supports IEEE 802.1Q VLAN tag insertion and removal. It
297 offers high-priority transmit queue for QoS and CoS
302 bool "ColdFire Ethernet Support"
306 This driver supports the network interface units in the
310 bool "ColdFire DMA Ethernet Support"
314 This driver supports the network interface units in the
318 bool "Microchip KS8851-MLL controller driver"
320 The Microchip KS8851 parallel bus external ethernet interface chip.
324 config KS8851_MLL_BASEADDR
325 hex "Microchip KS8851-MLL Base Address"
327 Define this to hold the physical address of the device (I/O space)
332 bool "Marvell Orion5x/Kirkwood network interface support"
333 depends on ARCH_KIRKWOOD || ARCH_ORION5X
334 select PHYLIB if DM_ETH
336 This driver supports the network interface units in the
337 Marvell Orion5x and Kirkwood SoCs
340 bool "Marvell Armada XP/385/3700 network interface support"
341 depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
344 This driver supports the network interface units in the
345 Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
348 bool "Marvell Armada 375/7K/8K network interface support"
349 depends on ARMADA_375 || ARMADA_8K
354 This driver supports the network interface units in the
355 Marvell ARMADA 375, 7K and 8K SoCs.
358 bool "Cadence MACB/GEM Ethernet Interface"
362 The Cadence MACB ethernet interface is found on many Atmel
363 AT91 and SAMA5 parts. This driver also supports the Cadence
364 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
365 Say Y to include support for the MACB/GEM chip.
368 bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
371 The Cadence MACB ethernet interface was used on Zynq platform.
372 Say Y to enable support for the MACB/GEM in Zynq chip.
375 bool "MediaTek MT7628 Ethernet Interface"
376 depends on SOC_MT7628
379 The MediaTek MT7628 ethernet interface is used on MT7628 and
383 bool "Intel Platform Controller Hub EG20T GMAC driver"
384 depends on DM_ETH && DM_PCI
387 This MAC is present in Intel Platform Controller Hub EG20T. It
388 supports 10/100/1000 Mbps operation.
393 Enable the support of the Reduced Gigabit Media-Independent
399 Enable support of the Media-Independent Interface (MII)
402 bool "Realtek 8139 series Ethernet controller driver"
404 This driver supports Realtek 8139 series fast ethernet family of
405 PCI chipsets/adapters.
408 bool "Realtek 8169 series Ethernet controller driver"
410 This driver supports Realtek 8169 series gigabit ethernet family of
411 PCI/PCIe chipsets/adapters.
414 bool "SMSC LAN911x and LAN921x controller driver"
420 hex "SMC911X Base Address"
422 Define this to hold the physical address
423 of the device (I/O space)
427 prompt "SMC911X bus width"
428 default SMC911X_16_BIT
430 config SMC911X_32_BIT
431 bool "Enable 32-bit interface"
433 config SMC911X_16_BIT
434 bool "Enable 16-bit interface"
436 Define this if data bus is 16 bits. If your processor
437 automatically converts one 32 bit word to two 16 bit
438 words you may also try CONFIG_SMC911X_32_BIT.
444 bool "Enable Allwinner GMAC Ethernet support"
446 Enable the support for Sun7i GMAC Ethernet controller
448 config SUN7I_GMAC_FORCE_TXERR
449 bool "Force PA17 as gmac function"
450 depends on SUN7I_GMAC
452 Some ethernet phys needs TXERR control. Since the GMAC
453 doesn't have such signal, setting PA17 as GMAC function
454 makes the pin output low, which enables data transmission.
457 bool "Allwinner Sun4i Ethernet MAC support"
461 This driver supports the Allwinner based SUN4I Ethernet MAC.
464 bool "Allwinner Sun8i Ethernet MAC support"
469 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
470 It can be found in H3/A64/A83T based SoCs and compatible with both
471 External and Internal PHYs.
474 bool "Renesas SH Ethernet MAC"
477 This driver supports the Ethernet for Renesas SH and ARM SoCs.
479 source "drivers/net/ti/Kconfig"
481 config XILINX_AXIEMAC
482 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
485 bool "Xilinx AXI Ethernet"
487 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
489 config XILINX_EMACLITE
490 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
493 bool "Xilinx Ethernetlite"
495 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
498 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
500 bool "Xilinx Ethernet GEM"
502 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
505 bool "Microchip PIC32 Ethernet Support"
506 depends on DM_ETH && MACH_PIC32
509 This driver implements 10/100 Mbps Ethernet and MAC layer for
510 Microchip PIC32 microcontrollers.
513 bool "Rockchip Synopsys Designware Ethernet MAC"
514 depends on DM_ETH && ETH_DESIGNWARE
516 This driver provides Rockchip SoCs network support based on the
517 Synopsys Designware driver.
520 bool "Renesas Ethernet AVB MAC"
521 depends on DM_ETH && RCAR_GEN3
524 This driver implements support for the Ethernet AVB block in
525 Renesas M3 and H3 SoCs.
528 bool "Fast Ethernet Controller on MPC8XX"
532 This driver implements support for the Fast Ethernet Controller
536 bool "Socionext AVE Ethernet support"
537 depends on DM_ETH && ARCH_UNIPHIER
542 This driver implements support for the Socionext AVE Ethernet
543 controller, as found on the Socionext UniPhier family.
545 source "drivers/net/mscc_eswitch/Kconfig"
549 depends on MPC8XX_FEC
554 depends on ETHER_ON_FEC1
557 Define to the hardcoded PHY address which corresponds
558 to the given FEC; i. e.
559 #define CONFIG_FEC1_PHY 4
560 means that the PHY with address 4 is connected to FEC1
562 When set to -1, means to probe for first available.
566 depends on ETHER_ON_FEC1
569 The PHY does not have a RXERR line (RMII only).
570 (so program the FEC to ignore it).
574 depends on MPC8XX_FEC && MPC885
579 depends on ETHER_ON_FEC2
582 Define to the hardcoded PHY address which corresponds
583 to the given FEC; i. e.
584 #define CONFIG_FEC1_PHY 4
585 means that the PHY with address 4 is connected to FEC1
587 When set to -1, means to probe for first available.
589 config FEC2_PHY_NORXERR
591 depends on ETHER_ON_FEC2
594 The PHY does not have a RXERR line (RMII only).
595 (so program the FEC to ignore it).
597 config SYS_DPAA_QBMAN
598 bool "Device tree fixup for QBMan on freescale SOCs"
599 depends on (ARM || PPC) && !SPL_BUILD
600 default y if ARCH_B4860 || \
619 QBman fixups to allow deep sleep in DPAA 1 SOCs
623 bool "Enable Three-Speed Ethernet Controller"
625 This driver implements support for the (Enhanced) Three-Speed
626 Ethernet Controller found on Freescale SoCs.
629 bool "MediaTek Ethernet GMAC Driver"
635 This Driver support MediaTek Ethernet GMAC
636 Say Y to enable support for the MediaTek Ethernet GMAC.
638 config HIGMACV300_ETH
639 bool "HiSilicon Gigabit Ethernet Controller"
644 This driver supports HIGMACV300 Ethernet controller found on
648 bool "NXP ENETC Ethernet controller"
649 depends on DM_PCI && DM_ETH && DM_MDIO
651 This driver supports the NXP ENETC Ethernet controller found on some
654 config MDIO_MUX_I2CREG
655 bool "MDIO MUX accessed as a register over I2C"
656 depends on DM_MDIO_MUX && DM_I2C
658 This driver is used for MDIO muxes driven by writing to a register of
659 an I2C chip. The board it was developed for uses a mux controlled by
660 on-board FPGA which in turn is accessed as a chip over I2C.
663 bool "Marvell MDIO interface support"
666 This driver supports the MDIO interface found in the network
667 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
668 Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
670 This driver is used by the MVPP2 and MVNETA drivers.
673 bool "NXP Layerscape MDIO interface support"
676 This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
677 on the mEMAC (which supports both Clauses 22 and 45).