1 source "drivers/net/phy/Kconfig"
2 source "drivers/net/pfe_eth/Kconfig"
3 source "drivers/net/fsl-mc/Kconfig"
6 bool "Enable Driver Model for Ethernet drivers"
9 Enable driver model for Ethernet.
11 The eth_*() interface will be implemented by the UCLASS_ETH class
12 This is currently implemented in net/eth-uclass.c
13 Look in include/net.h for details.
16 bool "Enable Driver Model for MDIO devices"
17 depends on DM_ETH && PHYLIB
19 Enable driver model for MDIO devices
21 Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
22 stand-alone devices. Useful in particular for systems that support
23 DM_ETH and have a stand-alone MDIO hardware block shared by multiple
25 This is currently implemented in net/mdio-uclass.c
26 Look in include/miiphy.h for details.
29 bool "Enable Driver Model for MDIO MUX devices"
32 Enable driver model for MDIO MUX devices
34 Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
35 systems that support DM_MDIO and integrate one or multiple muxes on
37 This is currently implemented in net/mdio-mux-uclass.c
38 Look in include/miiphy.h for details.
41 depends on DM_MDIO && SANDBOX
43 bool "Sandbox: Mocked MDIO driver"
45 This driver implements dummy read/write/reset MDIO functions mimicking
46 a bus with a single PHY.
48 This driver is used in for testing in test/dm/mdio.c
50 config MDIO_MUX_SANDBOX
51 depends on DM_MDIO_MUX && MDIO_SANDBOX
53 bool "Sandbox: Mocked MDIO-MUX driver"
55 This driver implements dummy select/deselect ops mimicking a MUX on
56 the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
58 This driver is used for testing in test/dm/mdio.c
61 bool "Enable Driver Model for Ethernet Generic PHY drivers"
64 Enable driver model for Ethernet Generic PHY .
67 bool "Network device support"
71 You must select Y to enable any network device support
72 Generally if you have any networking support this is a given
79 bool "Enable GbE PHY status parsing and configuration"
81 Enables support for parsing the status output and for
82 configuring GbE PHYs (affects the inner workings of some
83 commands and miiphyutil.c).
86 bool "Atheros AG7xxx Ethernet MAC support"
87 depends on DM_ETH && ARCH_ATH79
90 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
91 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
95 bool "Altera Triple-Speed Ethernet MAC support"
99 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
100 Please find details on the "Triple-Speed Ethernet MegaCore Function
101 Resource Center" of Altera.
104 bool "Broadcom SF2 (Starfighter2) Ethernet support"
107 This is an abstract framework which provides a generic interface
108 to MAC and DMA management for multiple Broadcom SoCs such as
109 Cygnus, NSP and bcm28155_ap platforms.
111 config BCM_SF2_ETH_DEFAULT_PORT
112 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
113 depends on BCM_SF2_ETH
116 Default port number for the Starfighter2 ethernet driver.
118 config BCM_SF2_ETH_GMAC
119 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
120 depends on BCM_SF2_ETH
122 This flag enables the ethernet support for Broadcom platforms with
123 GMAC such as Cygnus. This driver is based on the framework provided
124 by the BCM_SF2_ETH driver.
125 Say Y to any bcmcygnus based platforms.
128 bool "BCM6348 EMAC support"
129 depends on DM_ETH && ARCH_BMIPS
135 This driver supports the BCM6348 Ethernet MAC.
138 bool "BCM6368 EMAC support"
139 depends on DM_ETH && ARCH_BMIPS
143 This driver supports the BCM6368 Ethernet MAC.
146 bool "BCMGENET V5 support"
150 This driver supports the BCMGENET Ethernet MAC.
153 bool "Synopsys DWC Ethernet QOS device support"
157 This driver supports the Synopsys Designware Ethernet QOS (Quality
158 Of Service) IP block. The IP supports many options for bus type,
159 clocking/reset structure, and feature list. This driver currently
160 supports the specific configuration used in NVIDIA's Tegra186 chip,
161 but should be extensible to other combinations quite easily.
164 bool "Intel PRO/1000 Gigabit Ethernet support"
166 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
167 adapters. For more information on how to identify your adapter, go
168 to the Adapter & Driver ID Guide at:
170 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
172 config E1000_SPI_GENERIC
173 bool "Allow access to the Intel 8257x SPI bus"
176 Allow generic access to the SPI bus on the Intel 8257x, for
177 example with the "sspi" command.
180 bool "Enable SPI bus utility code"
183 Utility code for direct access to the SPI bus on Intel 8257x.
184 This does not do anything useful unless you set at least one
185 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
188 bool "Enable the e1000 command"
191 This enables the 'e1000' management command for E1000 devices. When
192 used on devices with SPI support you can reprogram the EEPROM from
196 depends on DM_ETH && SANDBOX
198 bool "Sandbox: Mocked Ethernet driver"
200 This driver simply responds with fake ARP replies and ping
201 replies that are used to verify network stack functionality
203 This driver is particularly useful in the test/dm/eth.c tests
205 config ETH_SANDBOX_RAW
206 depends on DM_ETH && SANDBOX
208 bool "Sandbox: Bridge to Linux Raw Sockets"
210 This driver is a bridge from the bottom of the network stack
211 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
212 network traffic to be tested from within sandbox. See
213 doc/arch/index.rst for more details.
215 config ETH_DESIGNWARE
216 bool "Synopsys Designware Ethernet MAC"
218 imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
220 This MAC is present in SoCs from various vendors. It supports
221 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
222 provide the PHY (physical media interface).
224 config ETH_DESIGNWARE_SOCFPGA
227 bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
228 depends on DM_ETH && ETH_DESIGNWARE
230 The Altera SoCFPGA requires additional configuration of the
231 Altera system manager to correctly interface with the PHY.
232 This code handles those SoC specifics.
235 bool "OpenCores 10/100 Mbps Ethernet MAC"
237 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
239 config FEC_MXC_SHARE_MDIO
240 bool "Share the MDIO bus for FEC controller"
243 config FEC_MXC_MDIO_BASE
244 hex "MDIO base address for the FEC controller"
245 depends on FEC_MXC_SHARE_MDIO
247 This specifies the MDIO registers base address. It is used when
248 two FEC controllers share MDIO bus.
251 bool "FEC Ethernet controller"
252 depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || VF610
254 This driver supports the 10/100 Fast Ethernet controller for
258 bool "Freescale FMan ethernet support"
259 depends on ARM || PPC
261 This driver support the Freescale FMan Ethernet controller
264 bool "Ftmac100 Ethernet Support"
266 This MAC is present in Andestech SoCs.
269 bool "Ftgmac100 Ethernet Support"
273 This driver supports the Faraday's FTGMAC100 Gigabit SoC
274 Ethernet controller that can be found on Aspeed SoCs (which
277 It is fully compliant with IEEE 802.3 specification for
278 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
279 Mbps Ethernet and includes Reduced Media Independent
280 Interface (RMII) and Reduced Gigabit Media Independent
281 Interface (RGMII) interfaces. It adopts an AHB bus interface
282 and integrates a link list DMA engine with direct M-Bus
283 accesses for transmitting and receiving packets. It has
284 independent TX/RX fifos, supports half and full duplex (1000
285 Mbps mode only supports full duplex), flow control for full
286 duplex and backpressure for half duplex.
288 The FTGMAC100 also implements IP, TCP, UDP checksum offloads
289 and supports IEEE 802.1Q VLAN tag insertion and removal. It
290 offers high-priority transmit queue for QoS and CoS
295 bool "ColdFire Ethernet Support"
299 This driver supports the network interface units in the
303 bool "ColdFire DMA Ethernet Support"
307 This driver supports the network interface units in the
311 bool "Microchip KS8851-MLL controller driver"
313 The Microchip KS8851 parallel bus external ethernet interface chip.
317 config KS8851_MLL_BASEADDR
318 hex "Microchip KS8851-MLL Base Address"
320 Define this to hold the physical address of the device (I/O space)
325 bool "Marvell Orion5x/Kirkwood network interface support"
326 depends on ARCH_KIRKWOOD || ARCH_ORION5X
327 select PHYLIB if DM_ETH
329 This driver supports the network interface units in the
330 Marvell Orion5x and Kirkwood SoCs
333 bool "Marvell Armada XP/385/3700 network interface support"
334 depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
337 This driver supports the network interface units in the
338 Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
341 bool "Marvell Armada 375/7K/8K network interface support"
342 depends on ARMADA_375 || ARMADA_8K
347 This driver supports the network interface units in the
348 Marvell ARMADA 375, 7K and 8K SoCs.
351 bool "Cadence MACB/GEM Ethernet Interface"
355 The Cadence MACB ethernet interface is found on many Atmel
356 AT91 and SAMA5 parts. This driver also supports the Cadence
357 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
358 Say Y to include support for the MACB/GEM chip.
361 bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
364 The Cadence MACB ethernet interface was used on Zynq platform.
365 Say Y to enable support for the MACB/GEM in Zynq chip.
368 bool "MediaTek MT7628 Ethernet Interface"
369 depends on SOC_MT7628
372 The MediaTek MT7628 ethernet interface is used on MT7628 and
376 bool "Intel Platform Controller Hub EG20T GMAC driver"
377 depends on DM_ETH && DM_PCI
380 This MAC is present in Intel Platform Controller Hub EG20T. It
381 supports 10/100/1000 Mbps operation.
386 Enable the support of the Reduced Gigabit Media-Independent
392 Enable support of the Media-Independent Interface (MII)
395 bool "Realtek 8139 series Ethernet controller driver"
397 This driver supports Realtek 8139 series fast ethernet family of
398 PCI chipsets/adapters.
401 bool "Realtek 8169 series Ethernet controller driver"
403 This driver supports Realtek 8169 series gigabit ethernet family of
404 PCI/PCIe chipsets/adapters.
407 bool "SMSC LAN911x and LAN921x controller driver"
413 hex "SMC911X Base Address"
415 Define this to hold the physical address
416 of the device (I/O space)
420 prompt "SMC911X bus width"
421 default SMC911X_16_BIT
423 config SMC911X_32_BIT
424 bool "Enable 32-bit interface"
426 config SMC911X_16_BIT
427 bool "Enable 16-bit interface"
429 Define this if data bus is 16 bits. If your processor
430 automatically converts one 32 bit word to two 16 bit
431 words you may also try CONFIG_SMC911X_32_BIT.
437 bool "Enable Allwinner GMAC Ethernet support"
439 Enable the support for Sun7i GMAC Ethernet controller
441 config SUN7I_GMAC_FORCE_TXERR
442 bool "Force PA17 as gmac function"
443 depends on SUN7I_GMAC
445 Some ethernet phys needs TXERR control. Since the GMAC
446 doesn't have such signal, setting PA17 as GMAC function
447 makes the pin output low, which enables data transmission.
450 bool "Allwinner Sun4i Ethernet MAC support"
454 This driver supports the Allwinner based SUN4I Ethernet MAC.
457 bool "Allwinner Sun8i Ethernet MAC support"
462 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
463 It can be found in H3/A64/A83T based SoCs and compatible with both
464 External and Internal PHYs.
467 bool "Renesas SH Ethernet MAC"
470 This driver supports the Ethernet for Renesas SH and ARM SoCs.
472 source "drivers/net/ti/Kconfig"
474 config XILINX_AXIEMAC
475 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
478 bool "Xilinx AXI Ethernet"
480 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
482 config XILINX_EMACLITE
483 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
486 bool "Xilinx Ethernetlite"
488 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
491 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
493 bool "Xilinx Ethernet GEM"
495 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
498 bool "Microchip PIC32 Ethernet Support"
499 depends on DM_ETH && MACH_PIC32
502 This driver implements 10/100 Mbps Ethernet and MAC layer for
503 Microchip PIC32 microcontrollers.
506 bool "Rockchip Synopsys Designware Ethernet MAC"
507 depends on DM_ETH && ETH_DESIGNWARE
509 This driver provides Rockchip SoCs network support based on the
510 Synopsys Designware driver.
513 bool "Renesas Ethernet AVB MAC"
514 depends on DM_ETH && RCAR_GEN3
517 This driver implements support for the Ethernet AVB block in
518 Renesas M3 and H3 SoCs.
521 bool "Fast Ethernet Controller on MPC8XX"
525 This driver implements support for the Fast Ethernet Controller
529 bool "Socionext AVE Ethernet support"
530 depends on DM_ETH && ARCH_UNIPHIER
535 This driver implements support for the Socionext AVE Ethernet
536 controller, as found on the Socionext UniPhier family.
538 source "drivers/net/mscc_eswitch/Kconfig"
542 depends on MPC8XX_FEC
547 depends on ETHER_ON_FEC1
550 Define to the hardcoded PHY address which corresponds
551 to the given FEC; i. e.
552 #define CONFIG_FEC1_PHY 4
553 means that the PHY with address 4 is connected to FEC1
555 When set to -1, means to probe for first available.
559 depends on ETHER_ON_FEC1
562 The PHY does not have a RXERR line (RMII only).
563 (so program the FEC to ignore it).
567 depends on MPC8XX_FEC && MPC885
572 depends on ETHER_ON_FEC2
575 Define to the hardcoded PHY address which corresponds
576 to the given FEC; i. e.
577 #define CONFIG_FEC1_PHY 4
578 means that the PHY with address 4 is connected to FEC1
580 When set to -1, means to probe for first available.
582 config FEC2_PHY_NORXERR
584 depends on ETHER_ON_FEC2
587 The PHY does not have a RXERR line (RMII only).
588 (so program the FEC to ignore it).
590 config SYS_DPAA_QBMAN
591 bool "Device tree fixup for QBMan on freescale SOCs"
592 depends on (ARM || PPC) && !SPL_BUILD
593 default y if ARCH_B4860 || \
612 QBman fixups to allow deep sleep in DPAA 1 SOCs
616 bool "Enable Three-Speed Ethernet Controller"
618 This driver implements support for the (Enhanced) Three-Speed
619 Ethernet Controller found on Freescale SoCs.
622 bool "MediaTek Ethernet GMAC Driver"
628 This Driver support MediaTek Ethernet GMAC
629 Say Y to enable support for the MediaTek Ethernet GMAC.
631 config HIGMACV300_ETH
632 bool "HiSilicon Gigabit Ethernet Controller"
637 This driver supports HIGMACV300 Ethernet controller found on
641 bool "NXP ENETC Ethernet controller"
642 depends on DM_PCI && DM_ETH && DM_MDIO
644 This driver supports the NXP ENETC Ethernet controller found on some
647 config MDIO_MUX_I2CREG
648 bool "MDIO MUX accessed as a register over I2C"
649 depends on DM_MDIO_MUX && DM_I2C
651 This driver is used for MDIO muxes driven by writing to a register of
652 an I2C chip. The board it was developed for uses a mux controlled by
653 on-board FPGA which in turn is accessed as a chip over I2C.
656 bool "Marvell MDIO interface support"
659 This driver supports the MDIO interface found in the network
660 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
661 Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
663 This driver is used by the MVPP2 and MVNETA drivers.
666 bool "NXP Layerscape MDIO interface support"
669 This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
670 on the mEMAC (which supports both Clauses 22 and 45).