1 source "drivers/net/phy/Kconfig"
2 source "drivers/net/pfe_eth/Kconfig"
3 source "drivers/net/fsl-mc/Kconfig"
4 source "drivers/net/bnxt/Kconfig"
10 bool "Enable Driver Model for Ethernet drivers"
13 Enable driver model for Ethernet.
15 The eth_*() interface will be implemented by the UCLASS_ETH class
16 This is currently implemented in net/eth-uclass.c
17 Look in include/net.h for details.
20 bool "Enable Driver Model for MDIO devices"
21 depends on DM_ETH && PHYLIB
23 Enable driver model for MDIO devices
25 Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
26 stand-alone devices. Useful in particular for systems that support
27 DM_ETH and have a stand-alone MDIO hardware block shared by multiple
29 This is currently implemented in net/mdio-uclass.c
30 Look in include/miiphy.h for details.
33 bool "Enable Driver Model for MDIO MUX devices"
36 Enable driver model for MDIO MUX devices
38 Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
39 systems that support DM_MDIO and integrate one or multiple muxes on
41 This is currently implemented in net/mdio-mux-uclass.c
42 Look in include/miiphy.h for details.
45 bool "Enable Driver Model for DSA switches"
46 depends on DM_ETH && DM_MDIO
49 Enable driver model for DSA switches
51 Adds UCLASS_DSA class supporting switches that follow the Distributed
52 Switch Architecture (DSA). These switches rely on the presence of a
53 management switch port connected to an Ethernet controller capable of
54 receiving frames from the switch. This host Ethernet controller is
55 called the "master" Ethernet interface in DSA terminology.
56 This is currently implemented in net/dsa-uclass.c, refer to
57 include/net/dsa.h for API details.
60 depends on DM_MDIO && SANDBOX
62 bool "Sandbox: Mocked MDIO driver"
64 This driver implements dummy read/write/reset MDIO functions mimicking
65 a bus with a single PHY.
67 This driver is used in for testing in test/dm/mdio.c
69 config MDIO_MUX_SANDBOX
70 depends on DM_MDIO_MUX && MDIO_SANDBOX
72 bool "Sandbox: Mocked MDIO-MUX driver"
74 This driver implements dummy select/deselect ops mimicking a MUX on
75 the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
77 This driver is used for testing in test/dm/mdio.c
80 bool "Enable Driver Model for Ethernet Generic PHY drivers"
83 Enable driver model for Ethernet Generic PHY .
86 depends on DM_DSA && SANDBOX
88 bool "Sandbox: Mocked DSA driver"
90 This driver implements a dummy DSA switch connected to a dummy sandbox
91 Ethernet device used as DSA master, to test DSA class code, including
92 exported DSA API and datapath processing of Ethernet traffic.
95 bool "Network device support"
99 You must select Y to enable any network device support
100 Generally if you have any networking support this is a given
107 bool "Enable GbE PHY status parsing and configuration"
109 Enables support for parsing the status output and for
110 configuring GbE PHYs (affects the inner workings of some
111 commands and miiphyutil.c).
114 bool "Atheros AG7xxx Ethernet MAC support"
115 depends on DM_ETH && ARCH_ATH79
118 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
119 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
123 bool "Altera Triple-Speed Ethernet MAC support"
127 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
128 Please find details on the "Triple-Speed Ethernet MegaCore Function
129 Resource Center" of Altera.
132 bool "Broadcom SF2 (Starfighter2) Ethernet support"
135 This is an abstract framework which provides a generic interface
136 to MAC and DMA management for multiple Broadcom SoCs such as
137 Cygnus, NSP and bcm28155_ap platforms.
139 config BCM_SF2_ETH_DEFAULT_PORT
140 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
141 depends on BCM_SF2_ETH
144 Default port number for the Starfighter2 ethernet driver.
146 config BCM_SF2_ETH_GMAC
147 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
148 depends on BCM_SF2_ETH
150 This flag enables the ethernet support for Broadcom platforms with
151 GMAC such as Cygnus. This driver is based on the framework provided
152 by the BCM_SF2_ETH driver.
153 Say Y to any bcmcygnus based platforms.
156 bool "BCM6348 EMAC support"
157 depends on DM_ETH && ARCH_BMIPS
163 This driver supports the BCM6348 Ethernet MAC.
166 bool "BCM6368 EMAC support"
167 depends on DM_ETH && ARCH_BMIPS
171 This driver supports the BCM6368 Ethernet MAC.
174 bool "BCMGENET V5 support"
178 This driver supports the BCMGENET Ethernet MAC.
180 config CORTINA_NI_ENET
181 bool "Cortina-Access Ethernet driver"
182 depends on DM_ETH && CORTINA_PLATFORM
184 This driver supports the Cortina-Access Ethernet MAC for
185 all supported CAxxxx SoCs.
188 bool "Calxeda XGMAC support"
191 This driver supports the XGMAC in Calxeda Highbank and Midway
195 bool "Davicom DM9000 controller driver"
197 The Davicom DM9000 parallel bus external ethernet interface chip.
200 bool "Synopsys DWC Ethernet QOS device support"
204 This driver supports the Synopsys Designware Ethernet QOS (Quality
205 Of Service) IP block. The IP supports many options for bus type,
206 clocking/reset structure, and feature list.
208 config DWC_ETH_QOS_IMX
209 bool "Synopsys DWC Ethernet QOS device support for IMX"
210 depends on DWC_ETH_QOS
212 The Synopsys Designware Ethernet QOS IP block with the specific
213 configuration used in IMX soc.
215 config DWC_ETH_QOS_STM32
216 bool "Synopsys DWC Ethernet QOS device support for STM32"
217 depends on DWC_ETH_QOS
219 default y if ARCH_STM32MP
221 The Synopsys Designware Ethernet QOS IP block with the specific
222 configuration used in STM32MP soc.
224 config DWC_ETH_QOS_TEGRA186
225 bool "Synopsys DWC Ethernet QOS device support for TEGRA186"
226 depends on DWC_ETH_QOS
227 default y if TEGRA186
229 The Synopsys Designware Ethernet QOS IP block with specific
230 configuration used in NVIDIA's Tegra186 chip.
233 bool "Intel PRO/1000 Gigabit Ethernet support"
236 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
237 adapters. For more information on how to identify your adapter, go
238 to the Adapter & Driver ID Guide at:
240 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
243 bool "Intel PRO/1000 has no NVMEM / EEPROM"
246 config E1000_SPI_GENERIC
247 bool "Allow access to the Intel 8257x SPI bus"
250 Allow generic access to the SPI bus on the Intel 8257x, for
251 example with the "sspi" command.
254 bool "Enable SPI bus utility code"
257 Utility code for direct access to the SPI bus on Intel 8257x.
258 This does not do anything useful unless you set at least one
259 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
262 bool "Enable the e1000 command"
265 This enables the 'e1000' management command for E1000 devices. When
266 used on devices with SPI support you can reprogram the EEPROM from
270 bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
272 This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
273 ethernet family of adapters.
276 depends on DM_ETH && SANDBOX
278 bool "Sandbox: Mocked Ethernet driver"
280 This driver simply responds with fake ARP replies and ping
281 replies that are used to verify network stack functionality
283 This driver is particularly useful in the test/dm/eth.c tests
285 config ETH_SANDBOX_RAW
286 depends on DM_ETH && SANDBOX
288 bool "Sandbox: Bridge to Linux Raw Sockets"
290 This driver is a bridge from the bottom of the network stack
291 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
292 network traffic to be tested from within sandbox. See
293 doc/arch/index.rst for more details.
295 config ETH_DESIGNWARE
296 bool "Synopsys Designware Ethernet MAC"
298 imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
300 This MAC is present in SoCs from various vendors. It supports
301 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
302 provide the PHY (physical media interface).
304 config ETH_DESIGNWARE_MESON8B
305 bool "Amlogic Meson8b and later glue driver for Synopsys Designware Ethernet MAC"
307 select ETH_DESIGNWARE
309 This provides glue layer to use Synopsys Designware Ethernet MAC
310 present on the Amlogic Meson8b, GX, AXG & G12A SoCs.
312 config ETH_DESIGNWARE_SOCFPGA
315 select DW_ALTDESCRIPTOR
316 bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
317 depends on DM_ETH && ETH_DESIGNWARE
319 The Altera SoCFPGA requires additional configuration of the
320 Altera system manager to correctly interface with the PHY.
321 This code handles those SoC specifics.
323 config ETH_DESIGNWARE_S700
324 bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
325 depends on DM_ETH && ETH_DESIGNWARE
327 This provides glue layer to use Synopsys Designware Ethernet MAC
328 present on Actions S700 SoC.
330 config DW_ALTDESCRIPTOR
331 bool "Designware Ethernet MAC uses alternate (enhanced) descriptors"
332 depends on ETH_DESIGNWARE
335 bool "OpenCores 10/100 Mbps Ethernet MAC"
337 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
339 config FEC_MXC_SHARE_MDIO
340 bool "Share the MDIO bus for FEC controller"
343 config FEC_MXC_MDIO_BASE
344 hex "MDIO base address for the FEC controller"
345 depends on FEC_MXC_SHARE_MDIO
347 This specifies the MDIO registers base address. It is used when
348 two FEC controllers share MDIO bus.
351 bool "FEC Ethernet controller"
352 depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || IMX93 || VF610
354 This driver supports the 10/100 Fast Ethernet controller for
358 bool "Freescale FMan ethernet support"
359 depends on ARM || PPC
360 select SYS_FMAN_V3 if ARCH_B4420 || ARCH_B4860 || ARCH_LS1043A || \
361 ARCH_LS1046A || ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || \
362 ARCH_T2080 || ARCH_T4240
364 This driver support the Freescale FMan Ethernet controller
366 config SYS_FMAN_FW_ADDR
367 hex "FMAN Firmware Address"
371 config SYS_QE_FMAN_FW_LENGTH
372 hex "FMAN QE Firmware length"
373 depends on FMAN_ENET || QE || U_QE
379 SoC has FMan v3 with mEMAC
382 bool "Ftmac100 Ethernet Support"
384 This MAC is present in Andestech SoCs.
387 bool "Ftgmac100 Ethernet Support"
391 This driver supports the Faraday's FTGMAC100 Gigabit SoC
392 Ethernet controller that can be found on Aspeed SoCs (which
395 It is fully compliant with IEEE 802.3 specification for
396 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
397 Mbps Ethernet and includes Reduced Media Independent
398 Interface (RMII) and Reduced Gigabit Media Independent
399 Interface (RGMII) interfaces. It adopts an AHB bus interface
400 and integrates a link list DMA engine with direct M-Bus
401 accesses for transmitting and receiving packets. It has
402 independent TX/RX fifos, supports half and full duplex (1000
403 Mbps mode only supports full duplex), flow control for full
404 duplex and backpressure for half duplex.
406 The FTGMAC100 also implements IP, TCP, UDP checksum offloads
407 and supports IEEE 802.1Q VLAN tag insertion and removal. It
408 offers high-priority transmit queue for QoS and CoS
411 config SYS_DISCOVER_PHY
415 bool "ColdFire Ethernet Support"
418 select SYS_DISCOVER_PHY
420 This driver supports the network interface units in the
423 config SYS_UNIFY_CACHE
425 bool "Invalidate icache during ethernet operations"
428 bool "ColdFire DMA Ethernet Support"
431 select SYS_DISCOVER_PHY
433 This driver supports the network interface units in the
437 bool "Microchip KS8851-MLL controller driver"
439 The Microchip KS8851 parallel bus external ethernet interface chip.
443 config KS8851_MLL_BASEADDR
444 hex "Microchip KS8851-MLL Base Address"
446 Define this to hold the physical address of the device (I/O space)
451 bool "Microchip KSZ9477 I2C controller driver"
452 depends on DM_DSA && DM_I2C
454 This driver implements a DSA switch driver for the KSZ9477 family
455 of GbE switches using the I2C interface.
458 bool "LPC32xx Ethernet MAC interface driver"
459 depends on ARCH_LPC32XX
463 bool "Marvell Orion5x/Kirkwood network interface support"
464 depends on ARCH_KIRKWOOD || ARCH_ORION5X
465 select PHYLIB if DM_ETH
467 This driver supports the network interface units in the
468 Marvell Orion5x and Kirkwood SoCs
471 bool "Marvell Armada XP/385/3700 network interface support"
472 depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
476 This driver supports the network interface units in the
477 Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
480 bool "Marvell Armada 375/7K/8K network interface support"
481 depends on ARMADA_375 || ARMADA_8K
486 This driver supports the network interface units in the
487 Marvell ARMADA 375, 7K and 8K SoCs.
490 bool "Cadence MACB/GEM Ethernet Interface"
493 The Cadence MACB ethernet interface is found on many Atmel
494 AT91 and SAMA5 parts. This driver also supports the Cadence
495 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
496 Say Y to include support for the MACB/GEM chip.
499 bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
502 The Cadence MACB ethernet interface was used on Zynq platform.
503 Say Y to enable support for the MACB/GEM in Zynq chip.
506 bool "MediaTek MT7620 Ethernet Interface"
507 depends on SOC_MT7620
513 The MediaTek MT7620 ethernet interface is used on MT7620 based
514 boards. It has a built-in switch with two configurable ports which
515 can connect to external PHY/MACs.
518 bool "MediaTek MT7628 Ethernet Interface"
519 depends on SOC_MT7628
522 The MediaTek MT7628 ethernet interface is used on MT7628 and
526 bool "MIPS Octeon ethernet support"
527 depends on ARCH_OCTEON
529 You must select Y to enable network device support for
530 MIPS Octeon SoCs. If unsure, say n
533 bool "OcteonTX Ethernet support"
534 depends on ARCH_OCTEONTX
537 You must select Y to enable network device support for
538 OcteonTX SoCs. If unsure, say n
541 bool "OcteonTX2 Ethernet support"
542 depends on ARCH_OCTEONTX2
543 select OCTEONTX2_CGX_INTF
545 You must select Y to enable network device support for
546 OcteonTX2 SoCs. If unsure, say n
549 bool "OcteonTX SMI Device support"
550 depends on ARCH_OCTEONTX || ARCH_OCTEONTX2
552 You must select Y to enable SMI controller support for
553 OcteonTX or OcteonTX2 SoCs. If unsure, say n
555 config OCTEONTX2_CGX_INTF
556 bool "OcteonTX2 CGX ATF interface support"
557 depends on ARCH_OCTEONTX2
558 default y if ARCH_OCTEONTX2
560 You must select Y to enable CGX ATF interface support for
561 OcteonTX2 SoCs. If unsure, say n
564 bool "Intel Platform Controller Hub EG20T GMAC driver"
568 This MAC is present in Intel Platform Controller Hub EG20T. It
569 supports 10/100/1000 Mbps operation.
574 Enable the support of the Reduced Gigabit Media-Independent
580 Enable support of the Media-Independent Interface (MII)
585 Enable support of the Reduced Media-Independent Interface (MII)
588 bool "AMD PCnet series Ethernet controller driver"
590 This driver supports AMD PCnet series fast ethernet family of
591 PCI chipsets/adapters.
593 source "drivers/net/qe/Kconfig"
596 bool "Realtek 8139 series Ethernet controller driver"
598 This driver supports Realtek 8139 series fast ethernet family of
599 PCI chipsets/adapters.
602 bool "Realtek 8169 series Ethernet controller driver"
604 This driver supports Realtek 8169 series gigabit ethernet family of
605 PCI/PCIe chipsets/adapters.
608 bool "NXP SJA1105 Ethernet switch family driver"
609 depends on DM_DSA && DM_SPI
612 This is the driver for the NXP SJA1105 automotive Ethernet switch
613 family. These are 5-port devices and are managed over an SPI
614 interface. Probing is handled based on OF bindings. The driver
615 supports the following revisions:
616 - SJA1105E (Gen. 1, No TT-Ethernet)
617 - SJA1105T (Gen. 1, TT-Ethernet)
618 - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
619 - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
620 - SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
621 - SJA1105S (Gen. 2, SGMII, TT-Ethernet)
624 bool "SMSC LAN911x and LAN921x controller driver"
630 hex "SMC911X Base Address"
632 Define this to hold the physical address
633 of the device (I/O space)
636 config SMC911X_32_BIT
637 bool "Enable SMC911X 32-bit interface"
639 Define this if data bus is 32 bits. If your processor use a
640 narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit
641 words, leave this to "n".
646 bool "Enable Allwinner GMAC Ethernet support"
648 Enable the support for Sun7i GMAC Ethernet controller
650 config SUN7I_GMAC_FORCE_TXERR
651 bool "Force PA17 as gmac function"
652 depends on SUN7I_GMAC
654 Some ethernet phys needs TXERR control. Since the GMAC
655 doesn't have such signal, setting PA17 as GMAC function
656 makes the pin output low, which enables data transmission.
659 bool "Allwinner Sun4i Ethernet MAC support"
663 This driver supports the Allwinner based SUN4I Ethernet MAC.
666 bool "Allwinner Sun8i Ethernet MAC support"
671 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
672 It can be found in H3/A64/A83T based SoCs and compatible with both
673 External and Internal PHYs.
676 bool "Renesas SH Ethernet MAC"
679 This driver supports the Ethernet for Renesas SH and ARM SoCs.
681 source "drivers/net/ti/Kconfig"
684 bool "DEC Tulip DC2114x Ethernet support"
686 This driver supports DEC DC2114x Fast ethernet chips.
688 config XILINX_AXIEMAC
692 bool "Xilinx AXI Ethernet"
694 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
696 config XILINX_AXIMRMAC
697 depends on DM_ETH && ARCH_VERSAL
698 bool "Xilinx AXI MRMAC"
700 MRMAC is a high performance, low latency, adaptable Ethernet
701 integrated hard IP. This can be configured up to four ports with MAC
702 rates from 10GE to 100GE. This could be present in some of the Xilinx
705 config XILINX_EMACLITE
709 bool "Xilinx Ethernetlite"
711 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
716 bool "Xilinx Ethernet GEM"
718 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
721 bool "Microchip PIC32 Ethernet Support"
722 depends on DM_ETH && MACH_PIC32
725 This driver implements 10/100 Mbps Ethernet and MAC layer for
726 Microchip PIC32 microcontrollers.
729 bool "Rockchip Synopsys Designware Ethernet MAC"
730 depends on DM_ETH && ETH_DESIGNWARE
732 This driver provides Rockchip SoCs network support based on the
733 Synopsys Designware driver.
736 bool "Renesas Ethernet AVB MAC"
737 depends on DM_ETH && RCAR_GEN3
740 This driver implements support for the Ethernet AVB block in
741 Renesas M3 and H3 SoCs.
744 bool "Fast Ethernet Controller on MPC8XX"
747 select SYS_DISCOVER_PHY
749 This driver implements support for the Fast Ethernet Controller
753 bool "Socionext AVE Ethernet support"
754 depends on DM_ETH && ARCH_UNIPHIER
759 This driver implements support for the Socionext AVE Ethernet
760 controller, as found on the Socionext UniPhier family.
763 bool "Socionext NETSEC Ethernet support"
764 depends on DM_ETH && SYNQUACER_SPI
767 This driver implements support for the Socionext SynQuacer NETSEC
768 ethernet controller, as found on the Socionext SynQuacer family.
770 source "drivers/net/mscc_eswitch/Kconfig"
774 depends on MPC8XX_FEC
779 depends on ETHER_ON_FEC1
782 Define to the hardcoded PHY address which corresponds
783 to the given FEC; i. e.
784 #define CONFIG_FEC1_PHY 4
785 means that the PHY with address 4 is connected to FEC1
787 When set to -1, means to probe for first available.
791 depends on ETHER_ON_FEC1
793 The PHY does not have a RXERR line (RMII only).
794 (so program the FEC to ignore it).
798 depends on MPC8XX_FEC && MPC885
803 depends on ETHER_ON_FEC2
806 Define to the hardcoded PHY address which corresponds
807 to the given FEC; i. e.
808 #define CONFIG_FEC1_PHY 4
809 means that the PHY with address 4 is connected to FEC1
811 When set to -1, means to probe for first available.
813 config FEC2_PHY_NORXERR
815 depends on ETHER_ON_FEC2
817 The PHY does not have a RXERR line (RMII only).
818 (so program the FEC to ignore it).
820 config SYS_DPAA_QBMAN
821 bool "Device tree fixup for QBMan on freescale SOCs"
822 depends on (ARM || PPC) && !SPL_BUILD
823 default y if ARCH_B4860 || \
838 QBman fixups to allow deep sleep in DPAA 1 SOCs
842 bool "Enable Three-Speed Ethernet Controller"
844 This driver implements support for the (Enhanced) Three-Speed
845 Ethernet Controller found on Freescale SoCs.
848 bool "MediaTek Ethernet GMAC Driver"
854 This Driver support MediaTek Ethernet GMAC
855 Say Y to enable support for the MediaTek Ethernet GMAC.
857 config HIGMACV300_ETH
858 bool "HiSilicon Gigabit Ethernet Controller"
863 This driver supports HIGMACV300 Ethernet controller found on
867 bool "NXP ENETC Ethernet controller"
868 depends on DM_ETH && DM_MDIO
870 This driver supports the NXP ENETC Ethernet controller found on some
873 config MDIO_MUX_I2CREG
874 bool "MDIO MUX accessed as a register over I2C"
875 depends on DM_MDIO_MUX && DM_I2C
877 This driver is used for MDIO muxes driven by writing to a register of
878 an I2C chip. The board it was developed for uses a mux controlled by
879 on-board FPGA which in turn is accessed as a chip over I2C.
882 bool "Qualcomm IPQ4019 MDIO interface support"
885 This driver supports the MDIO interface found in Qualcomm
886 IPQ40xx series Soc-s.
889 bool "Marvell MDIO interface support"
892 This driver supports the MDIO interface found in the network
893 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
894 Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
896 This driver is used by the MVPP2 and MVNETA drivers.
899 bool "NXP Layerscape MDIO interface support"
902 This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
903 on the mEMAC (which supports both Clauses 22 and 45).
906 bool "Aspeed MDIO interface support"
909 This driver supports the MDIO bus of Aspeed AST2600 SOC. The driver
910 currently supports Clause 22.
912 config MDIO_MUX_MMIOREG
913 bool "MDIO MUX accessed as a MMIO register access"
914 depends on DM_MDIO_MUX
916 This driver is used for MDIO muxes driven by writing to a register in
917 the MMIO physical memory.
919 config MDIO_MUX_MESON_G12A
920 bool "MDIO MUX for Amlogic Meson G12A SoCs"
921 depends on DM_MDIO_MUX
923 This driver is used for the MDIO mux found on the Amlogic G12A & compatible